From: Lucas Stach Date: Mon, 3 Aug 2015 15:50:11 +0000 (+0200) Subject: net: fec: fix initial runtime PM refcount X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=14d2b7c1a96ef37eb571599c73d4a1a606b964d6;p=deliverable%2Flinux.git net: fec: fix initial runtime PM refcount The clocks are initially active and thus the device is marked active. This still keeps the PM refcount at 0, the pm_runtime_put_autosuspend() call at the end of probe then leaves us with an invalid refcount of -1, which in turn leads to the device staying in suspended state even though netdev open had been called. Fix this by initializing the refcount to be coherent with the initial device status. Fixes: 8fff755e9f8 (net: fec: Ensure clocks are enabled while using mdio bus) Signed-off-by: Lucas Stach Tested-by: Uwe Kleine-König Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 32e3807c650e..271bb5862346 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3433,6 +3433,7 @@ fec_probe(struct platform_device *pdev) pm_runtime_set_autosuspend_delay(&pdev->dev, FEC_MDIO_PM_TIMEOUT); pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev);