From: Tang Yuantian <Yuantian.Tang@nxp.com>
Date: Tue, 9 Aug 2016 01:51:22 +0000 (+0800)
Subject: ahci: qoriq: enable snoopable sata read and write
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=16af080e47785d14919bf94bf8a4097c5c8529fb;p=deliverable%2Flinux.git

ahci: qoriq: enable snoopable sata read and write

By default the SATA IP on the qoriq SoCs does not generating
coherent/snoopable transactions.  This patch enable it in the
sata axicc register.
In addition, the dma-coherent property must be set on the
SATA controller nodes.

Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index e669fbd7f9c3..e8e4c3ed1b7e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -495,10 +495,11 @@
 		};
 
 		sata: sata@3200000 {
-			compatible = "fsl,ls1043a-ahci", "fsl,ls1021a-ahci";
+			compatible = "fsl,ls1043a-ahci";
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 69 0x4>;
 			clocks = <&clockgen 4 0>;
+			dma-coherent;
 		};
 
 		msi1: msi-controller1@1571000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 21023a388c29..5ead17c05bb8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -679,6 +679,7 @@
 			reg = <0x0 0x3200000 0x0 0x10000>;
 			interrupts = <0 133 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		sata1: sata@3210000 {
@@ -687,6 +688,7 @@
 			reg = <0x0 0x3210000 0x0 0x10000>;
 			interrupts = <0 136 0x4>; /* Level high type */
 			clocks = <&clockgen 4 3>;
+			dma-coherent;
 		};
 
 		usb0: usb3@3100000 {
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index ed357a184ee4..925c4b6a753b 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -30,17 +30,20 @@
 #define PORT_PHY3	0xB0
 #define PORT_PHY4	0xB4
 #define PORT_PHY5	0xB8
+#define PORT_AXICC	0xBC
 #define PORT_TRANS	0xC8
 
 /* port register default value */
 #define AHCI_PORT_PHY_1_CFG	0xa003fffe
 #define AHCI_PORT_TRANS_CFG	0x08000029
+#define AHCI_PORT_AXICC_CFG	0x3fffffff
 
 /* for ls1021a */
 #define LS1021A_PORT_PHY2	0x28183414
 #define LS1021A_PORT_PHY3	0x0e080e06
 #define LS1021A_PORT_PHY4	0x064a080b
 #define LS1021A_PORT_PHY5	0x2aa86470
+#define LS1021A_AXICC_ADDR	0xC0
 
 #define SATA_ECC_DISABLE	0x00020000
 
@@ -158,16 +161,19 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
 		writel(LS1021A_PORT_PHY4, reg_base + PORT_PHY4);
 		writel(LS1021A_PORT_PHY5, reg_base + PORT_PHY5);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + LS1021A_AXICC_ADDR);
 		break;
 
 	case AHCI_LS1043A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 
 	case AHCI_LS2080A:
 		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
 		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
+		writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
 		break;
 	}