From: Greg Ungerer Date: Thu, 8 Jan 2015 04:19:51 +0000 (+1000) Subject: serial: mcf: fix no driver name in probe output X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=201d8975ae5ada760bf29edd837da039f494709a;p=deliverable%2Flinux.git serial: mcf: fix no driver name in probe output The current output of the device probing looks like this: ColdFire internal UART serial driver (NULL device *): ttyS0 at MMIO 0xfc060000 (irq = 90, base_baud = 5208333) is a ColdFire UART console [ttyS0] enabled (NULL device *): ttyS1 at MMIO 0xfc064000 (irq = 91, base_baud = 5208333) is a ColdFire UART (NULL device *): ttyS2 at MMIO 0xfc068000 (irq = 92, base_baud = 5208333) is a ColdFire UART Fix the port device linkage at probing time so that the device name is printed out properly, and not "(NULL device *)". Signed-off-by: Greg Ungerer Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index 35f4719b2c0e..a9b0ab38a68c 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -629,6 +629,7 @@ static int mcf_probe(struct platform_device *pdev) port->mapbase = platp[i].mapbase; port->membase = (platp[i].membase) ? platp[i].membase : (unsigned char __iomem *) platp[i].mapbase; + port->dev = &pdev->dev; port->iotype = SERIAL_IO_MEM; port->irq = platp[i].irq; port->uartclk = MCF_BUSCLK;