From: Kevin Hilman Date: Mon, 16 Jul 2012 23:56:15 +0000 (-0700) Subject: ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=265a2bc84247c9b9e3bb4fe275f16ba99551a7e7;p=deliverable%2Flinux.git ARM: OMAP3: TWL4030: ensure sys_nirq1 is mux'd and wakeup enabled The SYS_NIRQ1 pin is the interupt line for the PMIC part of the TWL6030 and interrupts from the PMIC are needed as wakeup sources. Ensure this pin is mux'd as input and has wakeup enabled so PMIC interupts (e.g. RTC) can be used as wakeup sources. Tested on 3430/n900, OMAP3530/Overo Fire, 3730/Overo FireSTORM, 3730/Beagle-xM. Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index de47f170ba50..db5ff6642375 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, struct twl4030_platform_data *pmic_data) { + omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(pmic_i2c_board_info.type, pmic_type, sizeof(pmic_i2c_board_info.type)); pmic_i2c_board_info.irq = pmic_irq;