From: Rodrigo Vivi Date: Tue, 22 Sep 2009 23:46:53 +0000 (-0700) Subject: omapfb: add support for rotation on the Blizzard LCD ctrl X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=2f21a62f16136f369788795a98aa5c313261f07b;p=deliverable%2Flinux.git omapfb: add support for rotation on the Blizzard LCD ctrl The LCD controller (EPSON S1D13744) supports rotation (0, 90, 180 and 270 degrees) on hardware just setting the bits 0 and 1 of 0x28 register (LCD Panel Configuration Register). Now it is possible to use this caps only setting the angle degree on var rotate of fb_var_screeninfo using the FBIOPUT_VSCREENINFO ioctl. Fixed-by: Siarhei Siamashka Signed-off-by: Rodrigo Vivi Signed-off-by: Tony Lindgren Signed-off-by: Imre Deak Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/video/omap/blizzard.c b/drivers/video/omap/blizzard.c index 9dfcf39d3367..d5e59556f9e2 100644 --- a/drivers/video/omap/blizzard.c +++ b/drivers/video/omap/blizzard.c @@ -44,6 +44,7 @@ #define BLIZZARD_CLK_SRC 0x0e #define BLIZZARD_MEM_BANK0_ACTIVATE 0x10 #define BLIZZARD_MEM_BANK0_STATUS 0x14 +#define BLIZZARD_PANEL_CONFIGURATION 0x28 #define BLIZZARD_HDISP 0x2a #define BLIZZARD_HNDP 0x2c #define BLIZZARD_VDISP0 0x2e @@ -162,6 +163,10 @@ struct blizzard_struct { int vid_scaled; int last_color_mode; int zoom_on; + int zoom_area_gx1; + int zoom_area_gx2; + int zoom_area_gy1; + int zoom_area_gy2; int screen_width; int screen_height; unsigned te_connected:1; @@ -513,6 +518,13 @@ static int do_full_screen_update(struct blizzard_request *req) return REQ_PENDING; } +static int check_1d_intersect(int a1, int a2, int b1, int b2) +{ + if (a2 <= b1 || b2 <= a1) + return 0; + return 1; +} + /* Setup all planes with an overlapping area with the update window. */ static int do_partial_update(struct blizzard_request *req, int plane, int x, int y, int w, int h, @@ -525,6 +537,7 @@ static int do_partial_update(struct blizzard_request *req, int plane, int color_mode; int flags; int zoom_off; + int have_zoom_for_this_update = 0; /* Global coordinates, relative to pixel 0,0 of the LCD */ gx1 = x + blizzard.plane[plane].pos_x; @@ -544,10 +557,6 @@ static int do_partial_update(struct blizzard_request *req, int plane, gx2_out = gx1_out + w_out; gy2_out = gy1_out + h_out; } - zoom_off = blizzard.zoom_on && gx1 == 0 && gy1 == 0 && - w == blizzard.screen_width && h == blizzard.screen_height; - blizzard.zoom_on = (!zoom_off && blizzard.zoom_on) || - (w < w_out || h < h_out); for (i = 0; i < OMAPFB_PLANE_NUM; i++) { struct plane_info *p = &blizzard.plane[i]; @@ -653,8 +662,49 @@ static int do_partial_update(struct blizzard_request *req, int plane, else disable_tearsync(); + if ((gx2_out - gx1_out) != (gx2 - gx1) || + (gy2_out - gy1_out) != (gy2 - gy1)) + have_zoom_for_this_update = 1; + + /* 'background' type of screen update (as opposed to 'destructive') + can be used to disable scaling if scaling is active */ + zoom_off = blizzard.zoom_on && !have_zoom_for_this_update && + (gx1_out == 0) && (gx2_out == blizzard.screen_width) && + (gy1_out == 0) && (gy2_out == blizzard.screen_height) && + (gx1 == 0) && (gy1 == 0); + + if (blizzard.zoom_on && !have_zoom_for_this_update && !zoom_off && + check_1d_intersect(blizzard.zoom_area_gx1, blizzard.zoom_area_gx2, + gx1_out, gx2_out) && + check_1d_intersect(blizzard.zoom_area_gy1, blizzard.zoom_area_gy2, + gy1_out, gy2_out)) { + /* Previous screen update was using scaling, current update + * is not using it. Additionally, current screen update is + * going to overlap with the scaled area. Scaling needs to be + * disabled in order to avoid 'magnifying glass' effect. + * Dummy setup of background window can be used for this. + */ + set_window_regs(0, 0, blizzard.screen_width, + blizzard.screen_height, + 0, 0, blizzard.screen_width, + blizzard.screen_height, + BLIZZARD_COLOR_RGB565, 1, flags); + blizzard.zoom_on = 0; + } + + /* remember scaling settings if we have scaled update */ + if (have_zoom_for_this_update) { + blizzard.zoom_on = 1; + blizzard.zoom_area_gx1 = gx1_out; + blizzard.zoom_area_gx2 = gx2_out; + blizzard.zoom_area_gy1 = gy1_out; + blizzard.zoom_area_gy2 = gy2_out; + } + set_window_regs(gx1, gy1, gx2, gy2, gx1_out, gy1_out, gx2_out, gy2_out, color_mode, zoom_off, flags); + if (zoom_off) + blizzard.zoom_on = 0; blizzard.extif->set_bits_per_cycle(16); /* set_window_regs has left the register index at the right @@ -908,6 +958,35 @@ static int blizzard_set_scale(int plane, int orig_w, int orig_h, return 0; } +static int blizzard_set_rotate(int angle) +{ + u32 l; + + l = blizzard_read_reg(BLIZZARD_PANEL_CONFIGURATION); + l &= ~0x03; + + switch (angle) { + case 0: + l = l | 0x00; + break; + case 90: + l = l | 0x03; + break; + case 180: + l = l | 0x02; + break; + case 270: + l = l | 0x01; + break; + default: + return -EINVAL; + } + + blizzard_write_reg(BLIZZARD_PANEL_CONFIGURATION, l); + + return 0; +} + static int blizzard_enable_plane(int plane, int enable) { if (enable) @@ -1285,7 +1364,8 @@ static void blizzard_get_caps(int plane, struct omapfb_caps *caps) caps->ctrl |= OMAPFB_CAPS_MANUAL_UPDATE | OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE | OMAPFB_CAPS_WINDOW_SCALE | - OMAPFB_CAPS_WINDOW_OVERLAY; + OMAPFB_CAPS_WINDOW_OVERLAY | + OMAPFB_CAPS_WINDOW_ROTATE; if (blizzard.te_connected) caps->ctrl |= OMAPFB_CAPS_TEARSYNC; caps->wnd_color |= (1 << OMAPFB_COLOR_RGB565) | @@ -1560,6 +1640,7 @@ struct lcd_ctrl blizzard_ctrl = { .setup_plane = blizzard_setup_plane, .set_scale = blizzard_set_scale, .enable_plane = blizzard_enable_plane, + .set_rotate = blizzard_set_rotate, .update_window = blizzard_update_window_async, .sync = blizzard_sync, .suspend = blizzard_suspend, diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/omap/omapfb_main.c index 8862233d57b6..db05f7e316e7 100644 --- a/drivers/video/omap/omapfb_main.c +++ b/drivers/video/omap/omapfb_main.c @@ -67,6 +67,7 @@ static struct caps_table_struct ctrl_caps[] = { { OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE, "pixel double window" }, { OMAPFB_CAPS_WINDOW_SCALE, "scale window" }, { OMAPFB_CAPS_WINDOW_OVERLAY, "overlay window" }, + { OMAPFB_CAPS_WINDOW_ROTATE, "rotate window" }, { OMAPFB_CAPS_SET_BACKLIGHT, "backlight setting" }, }; @@ -215,6 +216,15 @@ static int ctrl_change_mode(struct fb_info *fbi) offset, var->xres_virtual, plane->info.pos_x, plane->info.pos_y, var->xres, var->yres, plane->color_mode); + if (r < 0) + return r; + + if (fbdev->ctrl->set_rotate != NULL) { + r = fbdev->ctrl->set_rotate(var->rotate); + if (r < 0) + return r; + } + if (fbdev->ctrl->set_scale != NULL) r = fbdev->ctrl->set_scale(plane->idx, var->xres, var->yres, @@ -600,7 +610,7 @@ static void omapfb_rotate(struct fb_info *fbi, int rotate) struct omapfb_device *fbdev = plane->fbdev; omapfb_rqueue_lock(fbdev); - if (cpu_is_omap15xx() && rotate != fbi->var.rotate) { + if (rotate != fbi->var.rotate) { struct fb_var_screeninfo *new_var = &fbdev->new_var; memcpy(new_var, &fbi->var, sizeof(*new_var)); @@ -707,28 +717,42 @@ int omapfb_update_window_async(struct fb_info *fbi, void (*callback)(void *), void *callback_data) { + int xres, yres; struct omapfb_plane_struct *plane = fbi->par; struct omapfb_device *fbdev = plane->fbdev; - struct fb_var_screeninfo *var; + struct fb_var_screeninfo *var = &fbi->var; + + switch (var->rotate) { + case 0: + case 180: + xres = fbdev->panel->x_res; + yres = fbdev->panel->y_res; + break; + case 90: + case 270: + xres = fbdev->panel->y_res; + yres = fbdev->panel->x_res; + break; + default: + return -EINVAL; + } - var = &fbi->var; - if (win->x >= var->xres || win->y >= var->yres || - win->out_x > var->xres || win->out_y >= var->yres) + if (win->x >= xres || win->y >= yres || + win->out_x > xres || win->out_y > yres) return -EINVAL; if (!fbdev->ctrl->update_window || fbdev->ctrl->get_update_mode() != OMAPFB_MANUAL_UPDATE) return -ENODEV; - if (win->x + win->width >= var->xres) - win->width = var->xres - win->x; - if (win->y + win->height >= var->yres) - win->height = var->yres - win->y; - /* The out sizes should be cropped to the LCD size */ - if (win->out_x + win->out_width > fbdev->panel->x_res) - win->out_width = fbdev->panel->x_res - win->out_x; - if (win->out_y + win->out_height > fbdev->panel->y_res) - win->out_height = fbdev->panel->y_res - win->out_y; + if (win->x + win->width > xres) + win->width = xres - win->x; + if (win->y + win->height > yres) + win->height = yres - win->y; + if (win->out_x + win->out_width > xres) + win->out_width = xres - win->out_x; + if (win->out_y + win->out_height > yres) + win->out_height = yres - win->out_y; if (!win->width || !win->height || !win->out_width || !win->out_height) return 0;