From: Antoine Busque Date: Fri, 20 Nov 2015 21:29:13 +0000 (-0500) Subject: Docs: add high-level debug info doc X-Git-Tag: v1.4.0-rc1~81 X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=34a4aed0c436c70a3d1661451933dc8578cdea9e;p=babeltrace.git Docs: add high-level debug info doc Signed-off-by: Antoine Busque Signed-off-by: Jérémie Galarneau --- diff --git a/doc/debuginfo.txt b/doc/debuginfo.txt new file mode 100644 index 00000000..cae41349 --- /dev/null +++ b/doc/debuginfo.txt @@ -0,0 +1,180 @@ +Babeltrace Debug Info Analysis +----------------------------- + +The babeltrace debug info analysis is a set of features which allow +mapping events from a trace to their location in source code or within +a binary file, based on their `ip` (instruction pointer) field. + +Prerequisites +------------- + +In order to install a version of babeltrace with debug info support, +the following libraries are required: + + * libelf + * libdw + +Both of them are provided by the elfutils project +(https://fedorahosted.org/elfutils/), and can be installed through the +elfutils package on Ubuntu, Debian, RHEL, and others. + +Compiling for Debug Info Analysis +--------------------------------- + +Traced programs on which debug info analysis is to be performed can be +compiled in a few different ways, and still lead to useful results. + +Ideally, one should compile the program in debug mode, which is +achieved on gcc by simply using the `-g` flag. This generates debug +information in the operating system's native format, which is then +used by babeltrace to map an event's source location to a file and +line number, and the name of the surrounding function. + +Do note that only debug information in DWARF format, version 2 or +later, is currently supported by babeltrace. Use the `-gdwarf` or +`-gdwarf-(VERSION)` to explicitly generate DWARF debug information. + +If the executable is not compiled with `-g` or an equivalent option +enabled, and thus no DWARF information is available, babeltrace will +use ELF symbols from the executable. Instead of providing source file, +line number and function name, however, the analysis will provide the +name of the nearest function symbol, plus an offset in bytes to the +location in the executable from which the event originated. + +If the executable has neither ELF symbols nor DWARF information, +babeltrace will be unable to map an event to its source location and +will simply display the instruction pointer (address), as in prior +versions of babeltrace. + +Getting the Right Tracer +------------------------ + +Debug info analysis is performed automatically by babeltrace, provided +the trace contains sufficient information. In order to be able to +trace all the necessary information, the following software is +required: + + * lttng-ust version 2.8.0 or later + * lttng-tools, corresponding version + +You can get these from source at: + + * https://github.com/lttng/lttng-ust + * https://github.com/lttng/lttng-tools + +Ubuntu users also have the option of installing via the LTTng daily +PPA: + + * https://launchpad.net/~lttng/+archive/ubuntu/daily + +Tracing for Debug Info Analysis +------------------------------- + +Babeltrace needs some extra information from contexts, namely ip and +vpid, to perform its analysis. These can be enabled after the creation +of a tracing session as follows: + + $ lttng add-context --userspace --type ip --type vpid + +The tracing can then be performed as it normally would. Once the trace +is collected, it can the be read by babeltrace for analysis. + +Analysing the Trace +------------------- + +To perform the analysis, the trace can simply be read as it normally +would: + + $ babeltrace + +Debug info analysis is on by default and will automatically print the +extra source location information if it can find it. A sample output +may look like this: + + [...] + [19:53:41.648394410] (+0.000022616) colossus my_provider:my_first_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB4D4, debug_info = { func = "foo", source_loc = "/home/efficios/example/libhello.c:7" }, vpid = 25577 }, { my_string_field = "hello, tracer", my_integer_field = 42 } + [19:53:41.648423786] (+0.000029376) colossus my_provider:my_first_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB5A6, debug_info = { func = "bar", source_loc = "/home/efficios/example/libhello.c:13" }, vpid = 25577 }, { my_string_field = "recoltes et semailles", my_integer_field = 57 } + [19:53:41.648435726] (+0.000011940) colossus my_provider:my_other_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB66B, debug_info = { func = "baz", source_loc = "/home/efficios/example/libhello.c:20" }, vpid = 25577 }, { some_field = 1729 } + [...] + +The interesting part is the debug_info section of the context: + + debug_info = { func = "foo", source_loc = "/home/efficios/example/libhello.c:7" } + +This is the expected output for events generated by an executable for +which DWARF information is available. It shows the name of the +function containing the tracepoint instance which generated the event +("foo"), and its source location ("libhello.c", line 7). + +The second event in the sample output is of the same type +("my_first_tracepoint"), but it was generated by a different +tracepoint instance, hence the different source location (line 13) and +function ("bar"). + +The third event, of a different type, also shows debug information. + +If DWARF info is absent, but ELF symbols are not stripped, the output +will instead look like this: + + [...] + [19:53:41.648394410] (+0.000022616) colossus my_provider:my_first_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB4D4, debug_info = { func = "foo+0xa9" }, vpid = 25577 }, { my_string_field = "hello, tracer", my_integer_field = 42 } + [19:53:41.648423786] (+0.000029376) colossus my_provider:my_first_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB5A6, debug_info = { func = "bar+0xa9" }, vpid = 25577 }, { my_string_field = "recoltes et semailles", my_integer_field = 57 } + [19:53:41.648435726] (+0.000011940) colossus my_provider:my_other_tracepoint: { cpu_id = 2 }, { ip = 0x7F75AEDFB66B, debug_info = { func = "baz+0x9c" }, vpid = 25577 }, { some_field = 1729 } + [...] + +The debug information now provides only the function name as given by +ELF symbols, plus an offset in bytes from the symbol to the actual +location of the tracepoint instance. + +Debug Info and Dynamic Loading +------------------------------ + +Babeltrace can resolve addresses of events originating from +dynamically loaded libraries, provided that some extra information is +collected at tracing time. + +This can be achieved by preloading LTTng UST's libdl helper when +launching the program to be traced, like so: + + $ LD_PRELOAD="liblttng-ust-dl.so" + +The tracing and analysis can now be performed as described in prior +sections, and events from tracepoints in dlopened libraries will be +resolved automatically by babeltrace. + +Separate Debug Info +------------------- + +It is possible to store DWARF debug information separate from an +executable, whether for concerns of file size, or simply to facilitate +the sharing of the debug information. + +This is usually achieved via one of two mechanisms, namely build ID +and debug link. Both methods permit separate executables and debug +information. Their use and operation is described in GDB's +documentation at: + + https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html + +Babeltrace will find separate debug files automatically, provided they +follow the requirements described in the documentation above. The +debug information lookup order is the same as GDB's, that is first +debug info is looked for within the executable, then through the build +ID method in the standard /usr/lib/debug/.build-id/ location, and +finally in the various possible debug link locations. The first debug +information file found is used. + +Debug Info Directory +-------------------- + +When performing debug info analysis, babeltrace uses an executable's +path from when it was traced to resolve debug information. If, +however, the trace was taken on a different machine, or the executable +was simply moved since the trace was taken, it is possible to override +the base path from which to look for the debug information. To do so, +the --debug-info-dir babeltrace command-line flag is available. + +If a --debug-info-dir value is given, it will replace the default +/usr/lib/debug path used in build ID and debug link lookups. + +Note that multiple debug directories are not currently supported.