From: Lars-Peter Clausen Date: Tue, 21 Jul 2015 19:53:02 +0000 (+0200) Subject: ASoC: ad1980: Use core AC'97 reset helper X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=3ab3dbdfb91b70ef6bf4eb9b544bf54ff1dff51a;p=deliverable%2Flinux.git ASoC: ad1980: Use core AC'97 reset helper Use the new snd_ac97_reset() helper function to perform the reset and verify the device ID. Unfortunately the reset can't be done in snd_soc_new_ac97_codec() due to the special requirements in order to support the non-standard 16-bit slot mode of the ad1980. Signed-off-by: Lars-Peter Clausen Reviewed-by: Takashi Iwai Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/ad1980.c b/sound/soc/codecs/ad1980.c index d9cb81dd64b5..9ef20dbccbe3 100644 --- a/sound/soc/codecs/ad1980.c +++ b/sound/soc/codecs/ad1980.c @@ -202,19 +202,21 @@ static struct snd_soc_dai_driver ad1980_dai = { .formats = SND_SOC_STD_AC97_FMTS, }, }; +#define AD1980_VENDOR_ID 0x41445300 +#define AD1980_VENDOR_MASK 0xffffff00 + static int ad1980_reset(struct snd_soc_codec *codec, int try_warm) { struct snd_ac97 *ac97 = snd_soc_codec_get_drvdata(codec); unsigned int retry_cnt = 0; + int ret; do { - if (try_warm && soc_ac97_ops->warm_reset) { - soc_ac97_ops->warm_reset(ac97); - if (snd_soc_read(codec, AC97_RESET) == 0x0090) - return 1; - } + ret = snd_ac97_reset(ac97, true, AD1980_VENDOR_ID, + AD1980_VENDOR_MASK); + if (ret >= 0) + return 0; - soc_ac97_ops->reset(ac97); /* * Set bit 16slot in register 74h, then every slot will has only * 16 bits. This command is sent out in 20bit mode, in which @@ -223,8 +225,6 @@ static int ad1980_reset(struct snd_soc_codec *codec, int try_warm) */ snd_soc_write(codec, AC97_AD_SERIAL_CFG, 0x9900); - if (snd_soc_read(codec, AC97_RESET) == 0x0090) - return 0; } while (retry_cnt++ < 10); dev_err(codec->dev, "Failed to reset: AC97 link error\n"); @@ -260,22 +260,10 @@ static int ad1980_soc_probe(struct snd_soc_codec *codec) if (ret < 0) goto reset_err; - /* Read out vendor ID to make sure it is ad1980 */ - if (snd_soc_read(codec, AC97_VENDOR_ID1) != 0x4144) { - ret = -ENODEV; - goto reset_err; - } - vendor_id2 = snd_soc_read(codec, AC97_VENDOR_ID2); - - if (vendor_id2 != 0x5370) { - if (vendor_id2 != 0x5374) { - ret = -ENODEV; - goto reset_err; - } else { - dev_warn(codec->dev, - "Found AD1981 - only 2/2 IN/OUT Channels supported\n"); - } + if (vendor_id2 == 0x5374) { + dev_warn(codec->dev, + "Found AD1981 - only 2/2 IN/OUT Channels supported\n"); } /* unmute captures and playbacks volume */