From: Devendra Naga Date: Mon, 3 Jun 2013 21:16:17 +0000 (+0530) Subject: staging: octeon-usb: fix checkpatch error X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=3e842f73c68fe44e8569107b94d710f4bbdcbb1f;p=deliverable%2Flinux.git staging: octeon-usb: fix checkpatch error this places the opening braces just after the if, else, elseif, switch statements Cc: Aaro Koskinen Cc: David Daney Signed-off-by: Devendra Naga Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/octeon-usb/cvmx-usb.c b/drivers/staging/octeon-usb/cvmx-usb.c index 04a9ba3faeae..4d805de9bf3b 100644 --- a/drivers/staging/octeon-usb/cvmx-usb.c +++ b/drivers/staging/octeon-usb/cvmx-usb.c @@ -1674,15 +1674,13 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, usbc_hcintmsk.u32 = 0; usbc_hcintmsk.s.chhltdmsk = 1; - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - { + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { /* Channels need these extra interrupts when we aren't in DMA mode */ usbc_hcintmsk.s.datatglerrmsk = 1; usbc_hcintmsk.s.frmovrunmsk = 1; usbc_hcintmsk.s.bblerrmsk = 1; usbc_hcintmsk.s.xacterrmsk = 1; - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { /* Splits don't generate xfercompl, so we need ACK and NYET */ usbc_hcintmsk.s.nyetmsk = 1; usbc_hcintmsk.s.ackmsk = 1; @@ -1722,13 +1720,11 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, /* We need to do split transactions when we are talking to non high speed devices that are behind a high speed hub */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { /* On the start split phase (stage is even) record the frame number we will need to send the split complete. We only store the lower two bits since the time ahead can only be two frames */ - if ((transaction->stage&1) == 0) - { + if ((transaction->stage&1) == 0) { if (transaction->type == CVMX_USB_TRANSFER_BULK) pipe->split_sc_frame = (usb->frame_number + 1) & 0x7f; else @@ -1752,14 +1748,12 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, begin/middle/end of the data or all */ if (!usbc_hcsplt.s.compsplt && (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && - (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) - { + (pipe->transfer_type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { /* Clear the split complete frame number as there isn't going to be a split complete */ pipe->split_sc_frame = -1; /* See if we've started this transfer and sent data */ - if (transaction->actual_bytes == 0) - { + if (transaction->actual_bytes == 0) { /* Nothing sent yet, this is either a begin or the entire payload */ if (bytes_to_transfer <= 188) @@ -1767,8 +1761,7 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, else usbc_hcsplt.s.xactpos = 2; /* First part of payload */ } - else - { + else { /* Continuing the previous data, we must either be in the middle or at the end */ if (bytes_to_transfer <= 188) @@ -1784,8 +1777,7 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, /* Make sure the transfer never exceeds the byte limit of the hardware. Further bytes will be sent as continued transactions */ - if (bytes_to_transfer > MAX_TRANSFER_BYTES) - { + if (bytes_to_transfer > MAX_TRANSFER_BYTES) { /* Round MAX_TRANSFER_BYTES to a multiple of out packet size */ bytes_to_transfer = MAX_TRANSFER_BYTES / pipe->max_packet; bytes_to_transfer *= pipe->max_packet; @@ -1796,16 +1788,14 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, packets_to_transfer = (bytes_to_transfer + pipe->max_packet - 1) / pipe->max_packet; if (packets_to_transfer == 0) packets_to_transfer = 1; - else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) - { + else if ((packets_to_transfer>1) && (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA)) { /* Limit to one packet when not using DMA. Channels must be restarted between every packet for IN transactions, so there is no reason to do multiple packets in a row */ packets_to_transfer = 1; bytes_to_transfer = packets_to_transfer * pipe->max_packet; } - else if (packets_to_transfer > MAX_TRANSFER_PACKETS) - { + else if (packets_to_transfer > MAX_TRANSFER_PACKETS) { /* Limit the number of packet and data transferred to what the hardware can handle */ packets_to_transfer = MAX_TRANSFER_PACKETS; @@ -1856,8 +1846,7 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, } /* Do transaction type specific fixups as needed */ - switch (transaction->type) - { + switch (transaction->type) { case CVMX_USB_TRANSFER_CONTROL: __cvmx_usb_start_channel_control(usb, channel, pipe); break; @@ -1865,12 +1854,10 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, case CVMX_USB_TRANSFER_INTERRUPT: break; case CVMX_USB_TRANSFER_ISOCHRONOUS: - if (!__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { /* ISO transactions require different PIDs depending on direction and how many packets are needed */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) - { + if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { if (pipe->multi_count < 2) /* Need DATA0 */ USB_SET_FIELD32(CVMX_USBCX_HCTSIZX(channel, usb->index), cvmx_usbcx_hctsizx_t, pid, 0); else /* Need MDATA */ @@ -1908,13 +1895,11 @@ static void __cvmx_usb_start_channel(cvmx_usb_internal_state_t *usb, static cvmx_usb_pipe_t *__cvmx_usb_find_ready_pipe(cvmx_usb_internal_state_t *usb, cvmx_usb_pipe_list_t *list, uint64_t current_frame) { cvmx_usb_pipe_t *pipe = list->head; - while (pipe) - { + while (pipe) { if (!(pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED) && pipe->head && (pipe->next_tx_frame <= current_frame) && ((pipe->split_sc_frame == -1) || ((((int)current_frame - (int)pipe->split_sc_frame) & 0x7f) < 0x40)) && - (!usb->active_split || (usb->active_split == pipe->head))) - { + (!usb->active_split || (usb->active_split == pipe->head))) { CVMX_PREFETCH(pipe, 128); CVMX_PREFETCH(pipe->head, 0); return pipe; @@ -1944,8 +1929,7 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) CVMX_USB_LOG_CALLED(); CVMX_USB_LOG_PARAM("%p", usb); - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - { + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { /* Without DMA we need to be careful to not schedule something at the end of a frame and cause an overrun */ cvmx_usbcx_hfnum_t hfnum = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFNUM(usb->index))}; cvmx_usbcx_hfir_t hfir = {.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HFIR(usb->index))}; @@ -1953,13 +1937,11 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) goto done; } - while (usb->idle_hardware_channels) - { + while (usb->idle_hardware_channels) { /* Find an idle channel */ CVMX_CLZ(channel, usb->idle_hardware_channels); channel = 31 - channel; - if (cvmx_unlikely(channel > 7)) - { + if (cvmx_unlikely(channel > 7)) { if (cvmx_unlikely(usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_INFO)) cvmx_dprintf("%s: Idle hardware channels has a channel higher than 7. This is wrong\n", __FUNCTION__); break; @@ -1967,8 +1949,7 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) /* Find a pipe needing service */ pipe = NULL; - if (is_sof) - { + if (is_sof) { /* Only process periodic pipes on SOF interrupts. This way we are sure that the periodic data is sent in the beginning of the frame */ @@ -1976,8 +1957,7 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) if (cvmx_likely(!pipe)) pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_INTERRUPT, usb->frame_number); } - if (cvmx_likely(!pipe)) - { + if (cvmx_likely(!pipe)) { pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_CONTROL, usb->frame_number); if (cvmx_likely(!pipe)) pipe = __cvmx_usb_find_ready_pipe(usb, usb->active_pipes + CVMX_USB_TRANSFER_BULK, usb->frame_number); @@ -1989,14 +1969,12 @@ static void __cvmx_usb_schedule(cvmx_usb_internal_state_t *usb, int is_sof) CVMX_USB_LOG_PARAM("%p", pipe); if (cvmx_unlikely((usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_DEBUG_TRANSFERS) || - (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS))) - { + (pipe->flags & CVMX_USB_PIPE_FLAGS_DEBUG_TRANSFERS))) { cvmx_usb_transaction_t *transaction = pipe->head; const cvmx_usb_control_header_t *header = (transaction->control_header) ? cvmx_phys_to_ptr(transaction->control_header) : NULL; const char *dir = (pipe->transfer_dir == CVMX_USB_DIRECTION_IN) ? "IN" : "OUT"; const char *type; - switch (pipe->transfer_type) - { + switch (pipe->transfer_type) { case CVMX_USB_TRANSFER_CONTROL: type = "SETUP"; dir = (header->s.request_type & 0x80) ? "IN" : "OUT"; @@ -2025,13 +2003,10 @@ done: /* Only enable SOF interrupts when we have transactions pending in the future that might need to be scheduled */ need_sof = 0; - for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++) - { + for (ttype=CVMX_USB_TRANSFER_CONTROL; ttype<=CVMX_USB_TRANSFER_INTERRUPT; ttype++) { pipe = usb->active_pipes[ttype].head; - while (pipe) - { - if (pipe->next_tx_frame > usb->frame_number) - { + while (pipe) { + if (pipe->next_tx_frame > usb->frame_number) { need_sof = 1; break; } @@ -2071,13 +2046,11 @@ static void __cvmx_usb_perform_callback(cvmx_usb_internal_state_t *usb, if (pipe) pipe_handle = __cvmx_usb_get_pipe_handle(usb, pipe); - if (transaction) - { + if (transaction) { submit_handle = __cvmx_usb_get_submit_handle(usb, transaction); bytes_transferred = transaction->actual_bytes; /* Transactions are allowed to override the default callback */ - if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) - { + if ((reason == CVMX_USB_CALLBACK_TRANSFER_COMPLETE) && transaction->callback) { callback = transaction->callback; user_data = transaction->callback_data; } @@ -2132,16 +2105,14 @@ static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb, /* Isochronous transactions need extra processing as they might not be done after a single data transfer */ - if (cvmx_unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) - { + if (cvmx_unlikely(transaction->type == CVMX_USB_TRANSFER_ISOCHRONOUS)) { /* Update the number of bytes transferred in this ISO packet */ transaction->iso_packets[0].length = transaction->actual_bytes; transaction->iso_packets[0].status = complete_code; /* If there are more ISOs pending and we succeeded, schedule the next one */ - if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) - { + if ((transaction->iso_number_packets > 1) && (complete_code == CVMX_USB_COMPLETE_SUCCESS)) { transaction->actual_bytes = 0; /* No bytes transferred for this packet as of yet */ transaction->iso_number_packets--; /* One less ISO waiting to transfer */ transaction->iso_packets++; /* Increment to the next location in our packet array */ @@ -2159,8 +2130,7 @@ static void __cvmx_usb_perform_complete(cvmx_usb_internal_state_t * usb, transaction->prev->next = transaction->next; else pipe->head = transaction->next; - if (!pipe->head) - { + if (!pipe->head) { __cvmx_usb_remove_pipe(usb->active_pipes + pipe->transfer_type, pipe); __cvmx_usb_append_pipe(&usb->idle_pipes, pipe); @@ -2247,13 +2217,11 @@ static int __cvmx_usb_submit_transaction(cvmx_usb_internal_state_t *usb, transaction->stage = CVMX_USB_STAGE_NON_CONTROL; transaction->next = NULL; - if (pipe->tail) - { + if (pipe->tail) { transaction->prev = pipe->tail; transaction->prev->next = transaction; } - else - { + else { if (pipe->next_tx_frame < usb->frame_number) pipe->next_tx_frame = usb->frame_number + pipe->interval - (usb->frame_number - pipe->next_tx_frame) % pipe->interval; @@ -2626,8 +2594,7 @@ cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle, /* If the transaction is the HEAD of the queue and scheduled. We need to treat it special */ if ((pipe->head == transaction) && - (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) - { + (pipe->flags & __CVMX_USB_PIPE_FLAGS_SCHEDULED)) { cvmx_usbcx_hccharx_t usbc_hcchar; usb->pipe_for_channel[pipe->channel] = NULL; @@ -2637,8 +2604,7 @@ cvmx_usb_status_t cvmx_usb_cancel(cvmx_usb_state_t *state, int pipe_handle, usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index)); /* If the channel isn't enabled then the transaction already completed */ - if (usbc_hcchar.s.chena) - { + if (usbc_hcchar.s.chena) { usbc_hcchar.s.chdis = 1; __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(pipe->channel, usb->index), usbc_hcchar.u32); } @@ -2676,8 +2642,7 @@ cvmx_usb_status_t cvmx_usb_cancel_all(cvmx_usb_state_t *state, int pipe_handle) CVMX_USB_RETURN(CVMX_USB_INVALID_PARAM); /* Simply loop through and attempt to cancel each transaction */ - while (pipe->head) - { + while (pipe->head) { cvmx_usb_status_t result = cvmx_usb_cancel(state, pipe_handle, __cvmx_usb_get_submit_handle(usb, pipe->head)); if (cvmx_unlikely(result != CVMX_USB_SUCCESS)) @@ -2814,12 +2779,10 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* Read the interrupt status bits for the channel */ usbc_hcint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCINTX(channel, usb->index)); - if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) - { + if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) { usbc_hcchar.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index)); - if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) - { + if (usbc_hcchar.s.chena && usbc_hcchar.s.chdis) { /* There seems to be a bug in CN31XX which can cause interrupt IN transfers to get stuck until we do a write of HCCHARX without changing things */ @@ -2829,10 +2792,8 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* In non DMA mode the channels don't halt themselves. We need to manually disable channels that are left running */ - if (!usbc_hcint.s.chhltd) - { - if (usbc_hcchar.s.chena) - { + if (!usbc_hcint.s.chhltd) { + if (usbc_hcchar.s.chena) { cvmx_usbcx_hcintmskx_t hcintmsk; /* Disable all interrupts except CHHLTD */ hcintmsk.u32 = 0; @@ -2842,19 +2803,16 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) __cvmx_usb_write_csr32(usb, CVMX_USBCX_HCCHARX(channel, usb->index), usbc_hcchar.u32); CVMX_USB_RETURN(0); } - else if (usbc_hcint.s.xfercompl) - { + else if (usbc_hcint.s.xfercompl) { /* Successful IN/OUT with transfer complete. Channel halt isn't needed */ } - else - { + else { cvmx_dprintf("USB%d: Channel %d interrupt without halt\n", usb->index, channel); CVMX_USB_RETURN(0); } } } - else - { + else { /* There is are no interrupts that we need to process when the channel is still running */ if (!usbc_hcint.s.chhltd) @@ -2887,16 +2845,14 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* Calculating the number of bytes successfully transferred is dependent on the transfer direction */ packets_processed = transaction->pktcnt - usbc_hctsiz.s.pktcnt; - if (usbc_hcchar.s.epdir) - { + if (usbc_hcchar.s.epdir) { /* IN transactions are easy. For every byte received the hardware decrements xfersize. All we need to do is subtract the current value of xfersize from its starting value and we know how many bytes were written to the buffer */ bytes_this_transfer = transaction->xfersize - usbc_hctsiz.s.xfersize; } - else - { + else { /* OUT transaction don't decrement xfersize. Instead pktcnt is decremented on every successful packet send. The hardware does this when it receives an ACK, or NYET. If it doesn't @@ -2950,8 +2906,7 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT)) pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; - if (usbc_hcint.s.stall) - { + if (usbc_hcint.s.stall) { /* STALL as a response means this transaction cannot be completed because the device can't process transactions. Tell the user. Any data that was transferred will be counted on the actual bytes @@ -2959,20 +2914,17 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) pipe->pid_toggle = 0; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_STALL); } - else if (usbc_hcint.s.xacterr) - { + else if (usbc_hcint.s.xacterr) { /* We know at least one packet worked if we get a ACK or NAK. Reset the retry counter */ if (usbc_hcint.s.nak || usbc_hcint.s.ack) transaction->retries = 0; transaction->retries++; - if (transaction->retries > MAX_RETRIES) - { + if (transaction->retries > MAX_RETRIES) { /* XactErr as a response means the device signaled something wrong with the transfer. For example, PID toggle errors cause these */ __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_XACTERR); } - else - { + else { /* If this was a split then clear our split in progress marker */ if (usb->active_split == transaction) usb->active_split = NULL; @@ -2996,27 +2948,23 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) /* We'll retry the exact same transaction again */ transaction->retries++; } - else if (usbc_hcint.s.nyet) - { + else if (usbc_hcint.s.nyet) { /* NYET as a response is only allowed in three cases: as a response to a ping, as a response to a split transaction, and as a response to a bulk out. The ping case is handled by hardware, so we only have splits and bulk out */ - if (!__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (!__cvmx_usb_pipe_needs_split(usb, pipe)) { transaction->retries = 0; /* If there is more data to go then we need to try again. Otherwise this transaction is complete */ if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } - else - { + else { /* Split transactions retry the split complete 4 times then rewind to the start split and do the entire transactions again */ transaction->retries++; - if ((transaction->retries & 0x3) == 0) - { + if ((transaction->retries & 0x3) == 0) { /* Rewind to the beginning of the transaction by anding off the split complete bit */ transaction->stage &= ~1; @@ -3024,8 +2972,7 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) } } } - else if (usbc_hcint.s.ack) - { + else if (usbc_hcint.s.ack) { transaction->retries = 0; /* The ACK bit can only be checked after the other error bits. This is because a multi packet transfer may succeed in a number of packets @@ -3052,8 +2999,7 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) pipe->pid_toggle = 1; if (__cvmx_usb_pipe_needs_split(usb, pipe)) transaction->stage = CVMX_USB_STAGE_SETUP_SPLIT_COMPLETE; - else - { + else { cvmx_usb_control_header_t *header = cvmx_phys_to_ptr(transaction->control_header); if (header->s.length) transaction->stage = CVMX_USB_STAGE_DATA; @@ -3071,34 +3017,29 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) } break; case CVMX_USB_STAGE_DATA: - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { transaction->stage = CVMX_USB_STAGE_DATA_SPLIT_COMPLETE; /* For setup OUT data that are splits, the hardware doesn't appear to count transferred data. Here we manually update the data transferred */ - if (!usbc_hcchar.s.epdir) - { + if (!usbc_hcchar.s.epdir) { if (buffer_space_left < pipe->max_packet) transaction->actual_bytes += buffer_space_left; else transaction->actual_bytes += pipe->max_packet; } } - else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) - { + else if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { pipe->pid_toggle = 1; transaction->stage = CVMX_USB_STAGE_STATUS; } break; case CVMX_USB_STAGE_DATA_SPLIT_COMPLETE: - if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) - { + if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { pipe->pid_toggle = 1; transaction->stage = CVMX_USB_STAGE_STATUS; } - else - { + else { transaction->stage = CVMX_USB_STAGE_DATA; } break; @@ -3119,31 +3060,26 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) it finishes with an ACK is during a split transaction. For splits we need to continue the transfer if more data is needed */ - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL) transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; - else - { + else { if (buffer_space_left && (bytes_in_last_packet == pipe->max_packet)) transaction->stage = CVMX_USB_STAGE_NON_CONTROL; - else - { + else { if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } } } - else - { + else { if ((pipe->device_speed == CVMX_USB_SPEED_HIGH) && (pipe->transfer_type == CVMX_USB_TRANSFER_BULK) && (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) && (usbc_hcint.s.nak)) pipe->flags |= __CVMX_USB_PIPE_FLAGS_NEED_PING; - if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) - { + if (!buffer_space_left || (bytes_in_last_packet < pipe->max_packet)) { if (transaction->type == CVMX_USB_TRANSFER_INTERRUPT) pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); @@ -3151,32 +3087,26 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) } break; case CVMX_USB_TRANSFER_ISOCHRONOUS: - if (__cvmx_usb_pipe_needs_split(usb, pipe)) - { + if (__cvmx_usb_pipe_needs_split(usb, pipe)) { /* ISOCHRONOUS OUT splits don't require a complete split stage. Instead they use a sequence of begin OUT splits to transfer the data 188 bytes at a time. Once the transfer is complete, the pipe sleeps until the next schedule interval */ - if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) - { + if (pipe->transfer_dir == CVMX_USB_DIRECTION_OUT) { /* If no space left or this wasn't a max size packet then this transfer is complete. Otherwise start it again to send the next 188 bytes */ - if (!buffer_space_left || (bytes_this_transfer < 188)) - { + if (!buffer_space_left || (bytes_this_transfer < 188)) { pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } } - else - { - if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) - { + else { + if (transaction->stage == CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE) { /* We are in the incoming data phase. Keep getting data until we run out of space or get a small packet */ - if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) - { + if ((buffer_space_left == 0) || (bytes_in_last_packet < pipe->max_packet)) { pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } @@ -3185,16 +3115,14 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) transaction->stage = CVMX_USB_STAGE_NON_CONTROL_SPLIT_COMPLETE; } } - else - { + else { pipe->next_tx_frame += pipe->interval; __cvmx_usb_perform_complete(usb, pipe, transaction, CVMX_USB_COMPLETE_SUCCESS); } break; } } - else if (usbc_hcint.s.nak) - { + else if (usbc_hcint.s.nak) { /* If this was a split then clear our split in progress marker */ if (usb->active_split == transaction) usb->active_split = NULL; @@ -3209,8 +3137,7 @@ static int __cvmx_usb_poll_channel(cvmx_usb_internal_state_t *usb, int channel) pipe->next_tx_frame = usb->frame_number + pipe->interval - (usb->frame_number - pipe->next_tx_frame) % pipe->interval; } - else - { + else { cvmx_usb_port_status_t port; port = cvmx_usb_get_status((cvmx_usb_state_t *)usb); if (port.port_enabled) @@ -3269,8 +3196,7 @@ cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state) /* Clear the interrupts now that we know about them */ __cvmx_usb_write_csr32(usb, CVMX_USBCX_GINTSTS(usb->index), usbc_gintsts.u32); - if (usbc_gintsts.s.rxflvl) - { + if (usbc_gintsts.s.rxflvl) { /* RxFIFO Non-Empty (RxFLvl) Indicates that there is at least one packet pending to be read from the RxFIFO. */ @@ -3278,14 +3204,12 @@ cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state) if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) __cvmx_usb_poll_rx_fifo(usb); } - if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) - { + if (usbc_gintsts.s.ptxfemp || usbc_gintsts.s.nptxfemp) { /* Fill the Tx FIFOs when not in DMA mode */ if (usb->init_flags & CVMX_USB_INITIALIZE_FLAGS_NO_DMA) __cvmx_usb_poll_tx_fifo(usb); } - if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) - { + if (usbc_gintsts.s.disconnint || usbc_gintsts.s.prtint) { cvmx_usbcx_hprt_t usbc_hprt; /* Disconnect Detected Interrupt (DisconnInt) Asserted when a device disconnect is detected. */ @@ -3307,8 +3231,7 @@ cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state) usbc_hprt.s.prtena = 0; __cvmx_usb_write_csr32(usb, CVMX_USBCX_HPRT(usb->index), usbc_hprt.u32); } - if (usbc_gintsts.s.hchint) - { + if (usbc_gintsts.s.hchint) { /* Host Channels Interrupt (HChInt) The core sets this bit to indicate that an interrupt is pending on one of the channels of the core (in Host mode). The application @@ -3320,8 +3243,7 @@ cvmx_usb_status_t cvmx_usb_poll(cvmx_usb_state_t *state) appropriate status bit in the HCINTn register to clear this bit. */ cvmx_usbcx_haint_t usbc_haint; usbc_haint.u32 = __cvmx_usb_read_csr32(usb, CVMX_USBCX_HAINT(usb->index)); - while (usbc_haint.u32) - { + while (usbc_haint.u32) { int channel; CVMX_CLZ(channel, usbc_haint.u32); channel = 31 - channel;