From: Stephen M. Cameron Date: Thu, 27 May 2010 20:14:08 +0000 (-0500) Subject: [SCSI] hpsa: factor out hpsa_wait_for_mode_change_ack X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=3f4336f33314e7d3687ff46af1fcaa970e3f4e00;p=deliverable%2Flinux.git [SCSI] hpsa: factor out hpsa_wait_for_mode_change_ack Signed-off-by: Stephen M. Cameron Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index d495d8b19c9c..e89c40aa2b35 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3410,19 +3410,9 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h) writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG); } -static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h) +static void __devinit hpsa_wait_for_mode_change_ack(struct ctlr_info *h) { int i; - u32 trans_support; - - trans_support = readl(&(h->cfgtable->TransportSupport)); - if (!(trans_support & SIMPLE_MODE)) - return -ENOTSUPP; - - h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); - /* Update the field, and then ring the doorbell */ - writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); - writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); /* under certain very rare conditions, this can take awhile. * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right @@ -3434,6 +3424,21 @@ static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h) /* delay and try again */ msleep(10); } +} + +static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h) +{ + u32 trans_support; + + trans_support = readl(&(h->cfgtable->TransportSupport)); + if (!(trans_support & SIMPLE_MODE)) + return -ENOTSUPP; + + h->max_commands = readl(&(h->cfgtable->CmdsOutMax)); + /* Update the field, and then ring the doorbell */ + writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest)); + writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); + hpsa_wait_for_mode_change_ack(h); print_cfg_table(&h->pdev->dev, h->cfgtable); if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) { dev_warn(&h->pdev->dev, @@ -3814,7 +3819,6 @@ static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) */ int bft[8] = {5, 6, 8, 10, 12, 20, 28, 35}; /* for scatter/gathers */ int i = 0; - int l = 0; unsigned long register_value; trans_support = readl(&(h->cfgtable->TransportSupport)); @@ -3858,17 +3862,7 @@ static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h) writel(CFGTBL_Trans_Performant, &(h->cfgtable->HostWrite.TransportRequest)); writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL); - /* under certain very rare conditions, this can take awhile. - * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right - * as we enter this code.) */ - for (l = 0; l < MAX_CONFIG_WAIT; l++) { - register_value = readl(h->vaddr + SA5_DOORBELL); - if (!(register_value & CFGTBL_ChangeReq)) - break; - /* delay and try again */ - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - } + hpsa_wait_for_mode_change_ack(h); register_value = readl(&(h->cfgtable->TransportActive)); if (!(register_value & CFGTBL_Trans_Performant)) { dev_warn(&h->pdev->dev, "unable to get board into"