From: Thomas Gleixner <tglx@linutronix.de>
Date: Thu, 11 Oct 2007 09:12:27 +0000 (+0200)
Subject: i386: prepare shared kernel/setup.c
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=549c64ac41fd37236543143a4e92699958a3972e;p=deliverable%2Flinux.git

i386: prepare shared kernel/setup.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---

diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 4809425113f4..a832c417b1e7 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y := head.o init_task.o vmlinux.lds
 
 obj-y	:= process.o signal.o entry.o traps_32.o irq.o \
-		ptrace.o time.o ioport.o ldt.o setup.o i8259_32.o sys_i386_32.o \
+		ptrace.o time.o ioport.o ldt.o setup_32.o i8259_32.o sys_i386_32.o \
 		pci-dma_32.o i386_ksyms.o i387.o bootflag.o e820_32.o\
 		quirks.o i8237.o topology.o alternative.o i8253_32.o tsc.o
 
diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
deleted file mode 100644
index d474cd639bcb..000000000000
--- a/arch/i386/kernel/setup.c
+++ /dev/null
@@ -1,653 +0,0 @@
-/*
- *  linux/arch/i386/kernel/setup.c
- *
- *  Copyright (C) 1995  Linus Torvalds
- *
- *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
- *
- *  Memory region support
- *	David Parsons <orc@pell.chi.il.us>, July-August 1999
- *
- *  Added E820 sanitization routine (removes overlapping memory regions);
- *  Brian Moyle <bmoyle@mvista.com>, February 2001
- *
- * Moved CPU detection code to cpu/${cpu}.c
- *    Patrick Mochel <mochel@osdl.org>, March 2002
- *
- *  Provisions for empty E820 memory regions (reported by certain BIOSes).
- *  Alex Achenbach <xela@slit.de>, December 2002.
- *
- */
-
-/*
- * This file handles the architecture-dependent parts of initialization
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mmzone.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/acpi.h>
-#include <linux/apm_bios.h>
-#include <linux/initrd.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/mca.h>
-#include <linux/root_dev.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-#include <linux/efi.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/nodemask.h>
-#include <linux/kexec.h>
-#include <linux/crash_dump.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-
-#include <video/edid.h>
-
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/mpspec.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/arch_hooks.h>
-#include <asm/sections.h>
-#include <asm/io_apic.h>
-#include <asm/ist.h>
-#include <asm/io.h>
-#include <asm/vmi.h>
-#include <setup_arch.h>
-#include <bios_ebda.h>
-
-/* This value is set up by the early boot code to point to the value
-   immediately after the boot time page tables.  It contains a *physical*
-   address, and must not be in the .bss segment! */
-unsigned long init_pg_tables_end __initdata = ~0UL;
-
-int disable_pse __devinitdata = 0;
-
-/*
- * Machine setup..
- */
-extern struct resource code_resource;
-extern struct resource data_resource;
-
-/* cpu data as detected by the assembly code in head.S */
-struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
-EXPORT_SYMBOL(boot_cpu_data);
-
-unsigned long mmu_cr4_features;
-
-/* for MCA, but anyone else can use it if they want */
-unsigned int machine_id;
-#ifdef CONFIG_MCA
-EXPORT_SYMBOL(machine_id);
-#endif
-unsigned int machine_submodel_id;
-unsigned int BIOS_revision;
-unsigned int mca_pentium_flag;
-
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
-
-/* user-defined highmem size */
-static unsigned int highmem_pages = -1;
-
-/*
- * Setup options
- */
-struct screen_info screen_info;
-EXPORT_SYMBOL(screen_info);
-struct apm_info apm_info;
-EXPORT_SYMBOL(apm_info);
-struct edid_info edid_info;
-EXPORT_SYMBOL_GPL(edid_info);
-struct ist_info ist_info;
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
-	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-extern void early_cpu_init(void);
-extern int root_mountflags;
-
-unsigned long saved_videomode;
-
-#define RAMDISK_IMAGE_START_MASK  	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000	
-
-static char __initdata command_line[COMMAND_LINE_SIZE];
-
-struct boot_params __initdata boot_params;
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-struct edd edd;
-#ifdef CONFIG_EDD_MODULE
-EXPORT_SYMBOL(edd);
-#endif
-/**
- * copy_edd() - Copy the BIOS EDD information
- *              from boot_params into a safe place.
- *
- */
-static inline void copy_edd(void)
-{
-     memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
-     memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
-     edd.mbr_signature_nr = EDD_MBR_SIG_NR;
-     edd.edd_info_nr = EDD_NR;
-}
-#else
-static inline void copy_edd(void)
-{
-}
-#endif
-
-int __initdata user_defined_memmap = 0;
-
-/*
- * "mem=nopentium" disables the 4MB page tables.
- * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
- * to <mem>, overriding the bios size.
- * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
- * <start> to <start>+<mem>, overriding the bios size.
- *
- * HPA tells me bootloaders need to parse mem=, so no new
- * option should be mem=  [also see Documentation/i386/boot.txt]
- */
-static int __init parse_mem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	if (strcmp(arg, "nopentium") == 0) {
-		clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
-		disable_pse = 1;
-	} else {
-		/* If the user specifies memory size, we
-		 * limit the BIOS-provided memory map to
-		 * that size. exactmap can be used to specify
-		 * the exact map. mem=number can be used to
-		 * trim the existing memory map.
-		 */
-		unsigned long long mem_size;
- 
-		mem_size = memparse(arg, &arg);
-		limit_regions(mem_size);
-		user_defined_memmap = 1;
-	}
-	return 0;
-}
-early_param("mem", parse_mem);
-
-#ifdef CONFIG_PROC_VMCORE
-/* elfcorehdr= specifies the location of elf core header
- * stored by the crashed kernel.
- */
-static int __init parse_elfcorehdr(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	elfcorehdr_addr = memparse(arg, &arg);
-	return 0;
-}
-early_param("elfcorehdr", parse_elfcorehdr);
-#endif /* CONFIG_PROC_VMCORE */
-
-/*
- * highmem=size forces highmem to be exactly 'size' bytes.
- * This works even on boxes that have no highmem otherwise.
- * This also works to reduce highmem size on bigger boxes.
- */
-static int __init parse_highmem(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
-	return 0;
-}
-early_param("highmem", parse_highmem);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the
- * vmalloc area - the default is 128m.
- */
-static int __init parse_vmalloc(char *arg)
-{
-	if (!arg)
-		return -EINVAL;
-
-	__VMALLOC_RESERVE = memparse(arg, &arg);
-	return 0;
-}
-early_param("vmalloc", parse_vmalloc);
-
-/*
- * reservetop=size reserves a hole at the top of the kernel address space which
- * a hypervisor can load into later.  Needed for dynamically loaded hypervisors,
- * so relocating the fixmap can be done before paging initialization.
- */
-static int __init parse_reservetop(char *arg)
-{
-	unsigned long address;
-
-	if (!arg)
-		return -EINVAL;
-
-	address = memparse(arg, &arg);
-	reserve_top_address(address);
-	return 0;
-}
-early_param("reservetop", parse_reservetop);
-
-/*
- * Determine low and high memory ranges:
- */
-unsigned long __init find_max_low_pfn(void)
-{
-	unsigned long max_low_pfn;
-
-	max_low_pfn = max_pfn;
-	if (max_low_pfn > MAXMEM_PFN) {
-		if (highmem_pages == -1)
-			highmem_pages = max_pfn - MAXMEM_PFN;
-		if (highmem_pages + MAXMEM_PFN < max_pfn)
-			max_pfn = MAXMEM_PFN + highmem_pages;
-		if (highmem_pages + MAXMEM_PFN > max_pfn) {
-			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
-			highmem_pages = 0;
-		}
-		max_low_pfn = MAXMEM_PFN;
-#ifndef CONFIG_HIGHMEM
-		/* Maximum memory usable is what is directly addressable */
-		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
-					MAXMEM>>20);
-		if (max_pfn > MAX_NONPAE_PFN)
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		else
-			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-		max_pfn = MAXMEM_PFN;
-#else /* !CONFIG_HIGHMEM */
-#ifndef CONFIG_HIGHMEM64G
-		if (max_pfn > MAX_NONPAE_PFN) {
-			max_pfn = MAX_NONPAE_PFN;
-			printk(KERN_WARNING "Warning only 4GB will be used.\n");
-			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
-		}
-#endif /* !CONFIG_HIGHMEM64G */
-#endif /* !CONFIG_HIGHMEM */
-	} else {
-		if (highmem_pages == -1)
-			highmem_pages = 0;
-#ifdef CONFIG_HIGHMEM
-		if (highmem_pages >= max_pfn) {
-			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
-			highmem_pages = 0;
-		}
-		if (highmem_pages) {
-			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
-				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
-				highmem_pages = 0;
-			}
-			max_low_pfn -= highmem_pages;
-		}
-#else
-		if (highmem_pages)
-			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
-#endif
-	}
-	return max_low_pfn;
-}
-
-/*
- * workaround for Dell systems that neglect to reserve EBDA
- */
-static void __init reserve_ebda_region(void)
-{
-	unsigned int addr;
-	addr = get_bios_ebda();
-	if (addr)
-		reserve_bootmem(addr, PAGE_SIZE);	
-}
-
-#ifndef CONFIG_NEED_MULTIPLE_NODES
-void __init setup_bootmem_allocator(void);
-static unsigned long __init setup_memory(void)
-{
-	/*
-	 * partially used pages are not usable - thus
-	 * we are rounding upwards:
-	 */
-	min_low_pfn = PFN_UP(init_pg_tables_end);
-
-	find_max_pfn();
-
-	max_low_pfn = find_max_low_pfn();
-
-#ifdef CONFIG_HIGHMEM
-	highstart_pfn = highend_pfn = max_pfn;
-	if (max_pfn > max_low_pfn) {
-		highstart_pfn = max_low_pfn;
-	}
-	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
-		pages_to_mb(highend_pfn - highstart_pfn));
-	num_physpages = highend_pfn;
-	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
-#else
-	num_physpages = max_low_pfn;
-	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
-#endif
-#ifdef CONFIG_FLATMEM
-	max_mapnr = num_physpages;
-#endif
-	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
-			pages_to_mb(max_low_pfn));
-
-	setup_bootmem_allocator();
-
-	return max_low_pfn;
-}
-
-void __init zone_sizes_init(void)
-{
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] =
-		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
-	add_active_range(0, 0, highend_pfn);
-#else
-	add_active_range(0, 0, max_low_pfn);
-#endif
-
-	free_area_init_nodes(max_zone_pfns);
-}
-#else
-extern unsigned long __init setup_memory(void);
-extern void zone_sizes_init(void);
-#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-
-void __init setup_bootmem_allocator(void)
-{
-	unsigned long bootmap_size;
-	/*
-	 * Initialize the boot-time allocator (with low memory only):
-	 */
-	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
-
-	register_bootmem_low_pages(max_low_pfn);
-
-	/*
-	 * Reserve the bootmem bitmap itself as well. We do this in two
-	 * steps (first step was init_bootmem()) because this catches
-	 * the (very unlikely) case of us accidentally initializing the
-	 * bootmem allocator with an invalid RAM area.
-	 */
-	reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
-			 bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
-
-	/*
-	 * reserve physical page 0 - it's a special BIOS page on many boxes,
-	 * enabling clean reboots, SMP operation, laptop functions.
-	 */
-	reserve_bootmem(0, PAGE_SIZE);
-
-	/* reserve EBDA region, it's a 4K region */
-	reserve_ebda_region();
-
-    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
-       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
-       unless you have no PS/2 mouse plugged in. */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 == 6)
-	     reserve_bootmem(0xa0000 - 4096, 4096);
-
-#ifdef CONFIG_SMP
-	/*
-	 * But first pinch a few for the stack/trampoline stuff
-	 * FIXME: Don't need the extra page at 4K, but need to fix
-	 * trampoline before removing it. (see the GDT stuff)
-	 */
-	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
-#endif
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
-#endif
-#ifdef CONFIG_X86_FIND_SMP_CONFIG
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
-#endif
-	numa_kva_reserve();
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (LOADER_TYPE && INITRD_START) {
-		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
-			reserve_bootmem(INITRD_START, INITRD_SIZE);
-			initrd_start = INITRD_START + PAGE_OFFSET;
-			initrd_end = initrd_start+INITRD_SIZE;
-		}
-		else {
-			printk(KERN_ERR "initrd extends beyond end of memory "
-			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			    INITRD_START + INITRD_SIZE,
-			    max_low_pfn << PAGE_SHIFT);
-			initrd_start = 0;
-		}
-	}
-#endif
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		reserve_bootmem(crashk_res.start,
-			crashk_res.end - crashk_res.start + 1);
-#endif
-}
-
-/*
- * The node 0 pgdat is initialized before all of these because
- * it's needed for bootmem.  node>0 pgdats have their virtual
- * space allocated before the pagetables are in place to access
- * them, so they can't be cleared then.
- *
- * This should all compile down to nothing when NUMA is off.
- */
-static void __init remapped_pgdat_init(void)
-{
-	int nid;
-
-	for_each_online_node(nid) {
-		if (nid != 0)
-			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
-	}
-}
-
-#ifdef CONFIG_MCA
-static void set_mca_bus(int x)
-{
-	MCA_bus = x;
-}
-#else
-static void set_mca_bus(int x) { }
-#endif
-
-/* Overridden in paravirt.c if CONFIG_PARAVIRT */
-char * __init __attribute__((weak)) memory_setup(void)
-{
-	return machine_specific_memory_setup();
-}
-
-/*
- * Determine if we were loaded by an EFI loader.  If so, then we have also been
- * passed the efi memmap, systab, etc., so we should use these data structures
- * for initialization.  Note, the efi init code path is determined by the
- * global efi_enabled. This allows the same kernel image to be used on existing
- * systems (with a traditional BIOS) as well as on EFI systems.
- */
-void __init setup_arch(char **cmdline_p)
-{
-	unsigned long max_low_pfn;
-
-	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
-	pre_setup_arch_hook();
-	early_cpu_init();
-
-	/*
-	 * FIXME: This isn't an official loader_type right
-	 * now but does currently work with elilo.
-	 * If we were configured as an EFI kernel, check to make
-	 * sure that we were loaded correctly from elilo and that
-	 * the system table is valid.  If not, then initialize normally.
-	 */
-#ifdef CONFIG_EFI
-	if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
-		efi_enabled = 1;
-#endif
-
- 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- 	screen_info = SCREEN_INFO;
-	edid_info = EDID_INFO;
-	apm_info.bios = APM_BIOS_INFO;
-	ist_info = IST_INFO;
-	saved_videomode = VIDEO_MODE;
-	if( SYS_DESC_TABLE.length != 0 ) {
-		set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
-		machine_id = SYS_DESC_TABLE.table[0];
-		machine_submodel_id = SYS_DESC_TABLE.table[1];
-		BIOS_revision = SYS_DESC_TABLE.table[2];
-	}
-	bootloader_type = LOADER_TYPE;
-
-#ifdef CONFIG_BLK_DEV_RAM
-	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
-	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
-	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-	ARCH_SETUP
-	if (efi_enabled)
-		efi_init();
-	else {
-		printk(KERN_INFO "BIOS-provided physical RAM map:\n");
-		print_memory_map(memory_setup());
-	}
-
-	copy_edd();
-
-	if (!MOUNT_ROOT_RDONLY)
-		root_mountflags &= ~MS_RDONLY;
-	init_mm.start_code = (unsigned long) _text;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
-
-	code_resource.start = virt_to_phys(_text);
-	code_resource.end = virt_to_phys(_etext)-1;
-	data_resource.start = virt_to_phys(_etext);
-	data_resource.end = virt_to_phys(_edata)-1;
-
-	parse_early_param();
-
-	if (user_defined_memmap) {
-		printk(KERN_INFO "user-defined physical RAM map:\n");
-		print_memory_map("user");
-	}
-
-	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = command_line;
-
-	max_low_pfn = setup_memory();
-
-#ifdef CONFIG_VMI
-	/*
-	 * Must be after max_low_pfn is determined, and before kernel
-	 * pagetables are setup.
-	 */
-	vmi_init();
-#endif
-
-	/*
-	 * NOTE: before this point _nobody_ is allowed to allocate
-	 * any memory using the bootmem allocator.  Although the
-	 * alloctor is now initialised only the first 8Mb of the kernel
-	 * virtual address space has been mapped.  All allocations before
-	 * paging_init() has completed must use the alloc_bootmem_low_pages()
-	 * variant (which allocates DMA'able memory) and care must be taken
-	 * not to exceed the 8Mb limit.
-	 */
-
-#ifdef CONFIG_SMP
-	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
-#endif
-	paging_init();
-	remapped_pgdat_init();
-	sparse_init();
-	zone_sizes_init();
-
-	/*
-	 * NOTE: at this point the bootmem allocator is fully available.
-	 */
-
-	paravirt_post_allocator_init();
-
-	dmi_scan_machine();
-
-#ifdef CONFIG_X86_GENERICARCH
-	generic_apic_probe();
-#endif	
-	if (efi_enabled)
-		efi_map_memmap();
-
-#ifdef CONFIG_ACPI
-	/*
-	 * Parse the ACPI tables for possible boot-time SMP configuration.
-	 */
-	acpi_boot_table_init();
-#endif
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_X86_IO_APIC
-	check_acpi_pci();	/* Checks more than just ACPI actually */
-#endif
-#endif
-
-#ifdef CONFIG_ACPI
-	acpi_boot_init();
-
-#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
-	if (def_to_bigsmp)
-		printk(KERN_WARNING "More than 8 CPUs detected and "
-			"CONFIG_X86_PC cannot handle it.\nUse "
-			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
-#endif
-#endif
-#ifdef CONFIG_X86_LOCAL_APIC
-	if (smp_found_config)
-		get_smp_config();
-#endif
-
-	e820_register_memory();
-	e820_mark_nosave_regions();
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
-		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-#endif
-}
diff --git a/arch/i386/kernel/setup_32.c b/arch/i386/kernel/setup_32.c
new file mode 100644
index 000000000000..d474cd639bcb
--- /dev/null
+++ b/arch/i386/kernel/setup_32.c
@@ -0,0 +1,653 @@
+/*
+ *  linux/arch/i386/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *
+ *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ *
+ *  Memory region support
+ *	David Parsons <orc@pell.chi.il.us>, July-August 1999
+ *
+ *  Added E820 sanitization routine (removes overlapping memory regions);
+ *  Brian Moyle <bmoyle@mvista.com>, February 2001
+ *
+ * Moved CPU detection code to cpu/${cpu}.c
+ *    Patrick Mochel <mochel@osdl.org>, March 2002
+ *
+ *  Provisions for empty E820 memory regions (reported by certain BIOSes).
+ *  Alex Achenbach <xela@slit.de>, December 2002.
+ *
+ */
+
+/*
+ * This file handles the architecture-dependent parts of initialization
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <linux/screen_info.h>
+#include <linux/ioport.h>
+#include <linux/acpi.h>
+#include <linux/apm_bios.h>
+#include <linux/initrd.h>
+#include <linux/bootmem.h>
+#include <linux/seq_file.h>
+#include <linux/console.h>
+#include <linux/mca.h>
+#include <linux/root_dev.h>
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/efi.h>
+#include <linux/init.h>
+#include <linux/edd.h>
+#include <linux/nodemask.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+#include <linux/dmi.h>
+#include <linux/pfn.h>
+
+#include <video/edid.h>
+
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/mpspec.h>
+#include <asm/mmzone.h>
+#include <asm/setup.h>
+#include <asm/arch_hooks.h>
+#include <asm/sections.h>
+#include <asm/io_apic.h>
+#include <asm/ist.h>
+#include <asm/io.h>
+#include <asm/vmi.h>
+#include <setup_arch.h>
+#include <bios_ebda.h>
+
+/* This value is set up by the early boot code to point to the value
+   immediately after the boot time page tables.  It contains a *physical*
+   address, and must not be in the .bss segment! */
+unsigned long init_pg_tables_end __initdata = ~0UL;
+
+int disable_pse __devinitdata = 0;
+
+/*
+ * Machine setup..
+ */
+extern struct resource code_resource;
+extern struct resource data_resource;
+
+/* cpu data as detected by the assembly code in head.S */
+struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+/* common cpu data for all cpus */
+struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+EXPORT_SYMBOL(boot_cpu_data);
+
+unsigned long mmu_cr4_features;
+
+/* for MCA, but anyone else can use it if they want */
+unsigned int machine_id;
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
+unsigned int machine_submodel_id;
+unsigned int BIOS_revision;
+unsigned int mca_pentium_flag;
+
+/* Boot loader ID as an integer, for the benefit of proc_dointvec */
+int bootloader_type;
+
+/* user-defined highmem size */
+static unsigned int highmem_pages = -1;
+
+/*
+ * Setup options
+ */
+struct screen_info screen_info;
+EXPORT_SYMBOL(screen_info);
+struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
+struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
+struct ist_info ist_info;
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+	defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
+
+extern void early_cpu_init(void);
+extern int root_mountflags;
+
+unsigned long saved_videomode;
+
+#define RAMDISK_IMAGE_START_MASK  	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000	
+
+static char __initdata command_line[COMMAND_LINE_SIZE];
+
+struct boot_params __initdata boot_params;
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+struct edd edd;
+#ifdef CONFIG_EDD_MODULE
+EXPORT_SYMBOL(edd);
+#endif
+/**
+ * copy_edd() - Copy the BIOS EDD information
+ *              from boot_params into a safe place.
+ *
+ */
+static inline void copy_edd(void)
+{
+     memcpy(edd.mbr_signature, EDD_MBR_SIGNATURE, sizeof(edd.mbr_signature));
+     memcpy(edd.edd_info, EDD_BUF, sizeof(edd.edd_info));
+     edd.mbr_signature_nr = EDD_MBR_SIG_NR;
+     edd.edd_info_nr = EDD_NR;
+}
+#else
+static inline void copy_edd(void)
+{
+}
+#endif
+
+int __initdata user_defined_memmap = 0;
+
+/*
+ * "mem=nopentium" disables the 4MB page tables.
+ * "mem=XXX[kKmM]" defines a memory region from HIGH_MEM
+ * to <mem>, overriding the bios size.
+ * "memmap=XXX[KkmM]@XXX[KkmM]" defines a memory region from
+ * <start> to <start>+<mem>, overriding the bios size.
+ *
+ * HPA tells me bootloaders need to parse mem=, so no new
+ * option should be mem=  [also see Documentation/i386/boot.txt]
+ */
+static int __init parse_mem(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	if (strcmp(arg, "nopentium") == 0) {
+		clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
+		disable_pse = 1;
+	} else {
+		/* If the user specifies memory size, we
+		 * limit the BIOS-provided memory map to
+		 * that size. exactmap can be used to specify
+		 * the exact map. mem=number can be used to
+		 * trim the existing memory map.
+		 */
+		unsigned long long mem_size;
+ 
+		mem_size = memparse(arg, &arg);
+		limit_regions(mem_size);
+		user_defined_memmap = 1;
+	}
+	return 0;
+}
+early_param("mem", parse_mem);
+
+#ifdef CONFIG_PROC_VMCORE
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &arg);
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif /* CONFIG_PROC_VMCORE */
+
+/*
+ * highmem=size forces highmem to be exactly 'size' bytes.
+ * This works even on boxes that have no highmem otherwise.
+ * This also works to reduce highmem size on bigger boxes.
+ */
+static int __init parse_highmem(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
+	return 0;
+}
+early_param("highmem", parse_highmem);
+
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size'
+ * bytes. This can be used to increase (or decrease) the
+ * vmalloc area - the default is 128m.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+
+	__VMALLOC_RESERVE = memparse(arg, &arg);
+	return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+
+/*
+ * reservetop=size reserves a hole at the top of the kernel address space which
+ * a hypervisor can load into later.  Needed for dynamically loaded hypervisors,
+ * so relocating the fixmap can be done before paging initialization.
+ */
+static int __init parse_reservetop(char *arg)
+{
+	unsigned long address;
+
+	if (!arg)
+		return -EINVAL;
+
+	address = memparse(arg, &arg);
+	reserve_top_address(address);
+	return 0;
+}
+early_param("reservetop", parse_reservetop);
+
+/*
+ * Determine low and high memory ranges:
+ */
+unsigned long __init find_max_low_pfn(void)
+{
+	unsigned long max_low_pfn;
+
+	max_low_pfn = max_pfn;
+	if (max_low_pfn > MAXMEM_PFN) {
+		if (highmem_pages == -1)
+			highmem_pages = max_pfn - MAXMEM_PFN;
+		if (highmem_pages + MAXMEM_PFN < max_pfn)
+			max_pfn = MAXMEM_PFN + highmem_pages;
+		if (highmem_pages + MAXMEM_PFN > max_pfn) {
+			printk("only %luMB highmem pages available, ignoring highmem size of %uMB.\n", pages_to_mb(max_pfn - MAXMEM_PFN), pages_to_mb(highmem_pages));
+			highmem_pages = 0;
+		}
+		max_low_pfn = MAXMEM_PFN;
+#ifndef CONFIG_HIGHMEM
+		/* Maximum memory usable is what is directly addressable */
+		printk(KERN_WARNING "Warning only %ldMB will be used.\n",
+					MAXMEM>>20);
+		if (max_pfn > MAX_NONPAE_PFN)
+			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+		else
+			printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+		max_pfn = MAXMEM_PFN;
+#else /* !CONFIG_HIGHMEM */
+#ifndef CONFIG_HIGHMEM64G
+		if (max_pfn > MAX_NONPAE_PFN) {
+			max_pfn = MAX_NONPAE_PFN;
+			printk(KERN_WARNING "Warning only 4GB will be used.\n");
+			printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
+		}
+#endif /* !CONFIG_HIGHMEM64G */
+#endif /* !CONFIG_HIGHMEM */
+	} else {
+		if (highmem_pages == -1)
+			highmem_pages = 0;
+#ifdef CONFIG_HIGHMEM
+		if (highmem_pages >= max_pfn) {
+			printk(KERN_ERR "highmem size specified (%uMB) is bigger than pages available (%luMB)!.\n", pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
+			highmem_pages = 0;
+		}
+		if (highmem_pages) {
+			if (max_low_pfn-highmem_pages < 64*1024*1024/PAGE_SIZE){
+				printk(KERN_ERR "highmem size %uMB results in smaller than 64MB lowmem, ignoring it.\n", pages_to_mb(highmem_pages));
+				highmem_pages = 0;
+			}
+			max_low_pfn -= highmem_pages;
+		}
+#else
+		if (highmem_pages)
+			printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
+#endif
+	}
+	return max_low_pfn;
+}
+
+/*
+ * workaround for Dell systems that neglect to reserve EBDA
+ */
+static void __init reserve_ebda_region(void)
+{
+	unsigned int addr;
+	addr = get_bios_ebda();
+	if (addr)
+		reserve_bootmem(addr, PAGE_SIZE);	
+}
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+void __init setup_bootmem_allocator(void);
+static unsigned long __init setup_memory(void)
+{
+	/*
+	 * partially used pages are not usable - thus
+	 * we are rounding upwards:
+	 */
+	min_low_pfn = PFN_UP(init_pg_tables_end);
+
+	find_max_pfn();
+
+	max_low_pfn = find_max_low_pfn();
+
+#ifdef CONFIG_HIGHMEM
+	highstart_pfn = highend_pfn = max_pfn;
+	if (max_pfn > max_low_pfn) {
+		highstart_pfn = max_low_pfn;
+	}
+	printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+		pages_to_mb(highend_pfn - highstart_pfn));
+	num_physpages = highend_pfn;
+	high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
+#else
+	num_physpages = max_low_pfn;
+	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
+#endif
+#ifdef CONFIG_FLATMEM
+	max_mapnr = num_physpages;
+#endif
+	printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+			pages_to_mb(max_low_pfn));
+
+	setup_bootmem_allocator();
+
+	return max_low_pfn;
+}
+
+void __init zone_sizes_init(void)
+{
+	unsigned long max_zone_pfns[MAX_NR_ZONES];
+	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+	max_zone_pfns[ZONE_DMA] =
+		virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
+#ifdef CONFIG_HIGHMEM
+	max_zone_pfns[ZONE_HIGHMEM] = highend_pfn;
+	add_active_range(0, 0, highend_pfn);
+#else
+	add_active_range(0, 0, max_low_pfn);
+#endif
+
+	free_area_init_nodes(max_zone_pfns);
+}
+#else
+extern unsigned long __init setup_memory(void);
+extern void zone_sizes_init(void);
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
+
+void __init setup_bootmem_allocator(void)
+{
+	unsigned long bootmap_size;
+	/*
+	 * Initialize the boot-time allocator (with low memory only):
+	 */
+	bootmap_size = init_bootmem(min_low_pfn, max_low_pfn);
+
+	register_bootmem_low_pages(max_low_pfn);
+
+	/*
+	 * Reserve the bootmem bitmap itself as well. We do this in two
+	 * steps (first step was init_bootmem()) because this catches
+	 * the (very unlikely) case of us accidentally initializing the
+	 * bootmem allocator with an invalid RAM area.
+	 */
+	reserve_bootmem(__pa_symbol(_text), (PFN_PHYS(min_low_pfn) +
+			 bootmap_size + PAGE_SIZE-1) - __pa_symbol(_text));
+
+	/*
+	 * reserve physical page 0 - it's a special BIOS page on many boxes,
+	 * enabling clean reboots, SMP operation, laptop functions.
+	 */
+	reserve_bootmem(0, PAGE_SIZE);
+
+	/* reserve EBDA region, it's a 4K region */
+	reserve_ebda_region();
+
+    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
+       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
+       unless you have no PS/2 mouse plugged in. */
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+	    boot_cpu_data.x86 == 6)
+	     reserve_bootmem(0xa0000 - 4096, 4096);
+
+#ifdef CONFIG_SMP
+	/*
+	 * But first pinch a few for the stack/trampoline stuff
+	 * FIXME: Don't need the extra page at 4K, but need to fix
+	 * trampoline before removing it. (see the GDT stuff)
+	 */
+	reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
+#endif
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 */
+	acpi_reserve_bootmem();
+#endif
+#ifdef CONFIG_X86_FIND_SMP_CONFIG
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+#endif
+	numa_kva_reserve();
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (LOADER_TYPE && INITRD_START) {
+		if (INITRD_START + INITRD_SIZE <= (max_low_pfn << PAGE_SHIFT)) {
+			reserve_bootmem(INITRD_START, INITRD_SIZE);
+			initrd_start = INITRD_START + PAGE_OFFSET;
+			initrd_end = initrd_start+INITRD_SIZE;
+		}
+		else {
+			printk(KERN_ERR "initrd extends beyond end of memory "
+			    "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			    INITRD_START + INITRD_SIZE,
+			    max_low_pfn << PAGE_SHIFT);
+			initrd_start = 0;
+		}
+	}
+#endif
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		reserve_bootmem(crashk_res.start,
+			crashk_res.end - crashk_res.start + 1);
+#endif
+}
+
+/*
+ * The node 0 pgdat is initialized before all of these because
+ * it's needed for bootmem.  node>0 pgdats have their virtual
+ * space allocated before the pagetables are in place to access
+ * them, so they can't be cleared then.
+ *
+ * This should all compile down to nothing when NUMA is off.
+ */
+static void __init remapped_pgdat_init(void)
+{
+	int nid;
+
+	for_each_online_node(nid) {
+		if (nid != 0)
+			memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
+	}
+}
+
+#ifdef CONFIG_MCA
+static void set_mca_bus(int x)
+{
+	MCA_bus = x;
+}
+#else
+static void set_mca_bus(int x) { }
+#endif
+
+/* Overridden in paravirt.c if CONFIG_PARAVIRT */
+char * __init __attribute__((weak)) memory_setup(void)
+{
+	return machine_specific_memory_setup();
+}
+
+/*
+ * Determine if we were loaded by an EFI loader.  If so, then we have also been
+ * passed the efi memmap, systab, etc., so we should use these data structures
+ * for initialization.  Note, the efi init code path is determined by the
+ * global efi_enabled. This allows the same kernel image to be used on existing
+ * systems (with a traditional BIOS) as well as on EFI systems.
+ */
+void __init setup_arch(char **cmdline_p)
+{
+	unsigned long max_low_pfn;
+
+	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
+	pre_setup_arch_hook();
+	early_cpu_init();
+
+	/*
+	 * FIXME: This isn't an official loader_type right
+	 * now but does currently work with elilo.
+	 * If we were configured as an EFI kernel, check to make
+	 * sure that we were loaded correctly from elilo and that
+	 * the system table is valid.  If not, then initialize normally.
+	 */
+#ifdef CONFIG_EFI
+	if ((LOADER_TYPE == 0x50) && EFI_SYSTAB)
+		efi_enabled = 1;
+#endif
+
+ 	ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ 	screen_info = SCREEN_INFO;
+	edid_info = EDID_INFO;
+	apm_info.bios = APM_BIOS_INFO;
+	ist_info = IST_INFO;
+	saved_videomode = VIDEO_MODE;
+	if( SYS_DESC_TABLE.length != 0 ) {
+		set_mca_bus(SYS_DESC_TABLE.table[3] & 0x2);
+		machine_id = SYS_DESC_TABLE.table[0];
+		machine_submodel_id = SYS_DESC_TABLE.table[1];
+		BIOS_revision = SYS_DESC_TABLE.table[2];
+	}
+	bootloader_type = LOADER_TYPE;
+
+#ifdef CONFIG_BLK_DEV_RAM
+	rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
+	rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
+	rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
+#endif
+	ARCH_SETUP
+	if (efi_enabled)
+		efi_init();
+	else {
+		printk(KERN_INFO "BIOS-provided physical RAM map:\n");
+		print_memory_map(memory_setup());
+	}
+
+	copy_edd();
+
+	if (!MOUNT_ROOT_RDONLY)
+		root_mountflags &= ~MS_RDONLY;
+	init_mm.start_code = (unsigned long) _text;
+	init_mm.end_code = (unsigned long) _etext;
+	init_mm.end_data = (unsigned long) _edata;
+	init_mm.brk = init_pg_tables_end + PAGE_OFFSET;
+
+	code_resource.start = virt_to_phys(_text);
+	code_resource.end = virt_to_phys(_etext)-1;
+	data_resource.start = virt_to_phys(_etext);
+	data_resource.end = virt_to_phys(_edata)-1;
+
+	parse_early_param();
+
+	if (user_defined_memmap) {
+		printk(KERN_INFO "user-defined physical RAM map:\n");
+		print_memory_map("user");
+	}
+
+	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+	*cmdline_p = command_line;
+
+	max_low_pfn = setup_memory();
+
+#ifdef CONFIG_VMI
+	/*
+	 * Must be after max_low_pfn is determined, and before kernel
+	 * pagetables are setup.
+	 */
+	vmi_init();
+#endif
+
+	/*
+	 * NOTE: before this point _nobody_ is allowed to allocate
+	 * any memory using the bootmem allocator.  Although the
+	 * alloctor is now initialised only the first 8Mb of the kernel
+	 * virtual address space has been mapped.  All allocations before
+	 * paging_init() has completed must use the alloc_bootmem_low_pages()
+	 * variant (which allocates DMA'able memory) and care must be taken
+	 * not to exceed the 8Mb limit.
+	 */
+
+#ifdef CONFIG_SMP
+	smp_alloc_memory(); /* AP processor realmode stacks in low memory*/
+#endif
+	paging_init();
+	remapped_pgdat_init();
+	sparse_init();
+	zone_sizes_init();
+
+	/*
+	 * NOTE: at this point the bootmem allocator is fully available.
+	 */
+
+	paravirt_post_allocator_init();
+
+	dmi_scan_machine();
+
+#ifdef CONFIG_X86_GENERICARCH
+	generic_apic_probe();
+#endif	
+	if (efi_enabled)
+		efi_map_memmap();
+
+#ifdef CONFIG_ACPI
+	/*
+	 * Parse the ACPI tables for possible boot-time SMP configuration.
+	 */
+	acpi_boot_table_init();
+#endif
+
+#ifdef CONFIG_PCI
+#ifdef CONFIG_X86_IO_APIC
+	check_acpi_pci();	/* Checks more than just ACPI actually */
+#endif
+#endif
+
+#ifdef CONFIG_ACPI
+	acpi_boot_init();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+	if (def_to_bigsmp)
+		printk(KERN_WARNING "More than 8 CPUs detected and "
+			"CONFIG_X86_PC cannot handle it.\nUse "
+			"CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+#endif
+#ifdef CONFIG_X86_LOCAL_APIC
+	if (smp_found_config)
+		get_smp_config();
+#endif
+
+	e820_register_memory();
+	e820_mark_nosave_regions();
+
+#ifdef CONFIG_VT
+#if defined(CONFIG_VGA_CONSOLE)
+	if (!efi_enabled || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
+		conswitchp = &vga_con;
+#elif defined(CONFIG_DUMMY_CONSOLE)
+	conswitchp = &dummy_con;
+#endif
+#endif
+}