From: Matthias Schwarzott Date: Sun, 31 Aug 2014 11:35:08 +0000 (-0300) Subject: [media] cx231xx: Add support for Hauppauge WinTV-HVR-900H (111xxx) X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=57cbf3efc8b610b605cbbef6cba8c1759ca9aa87;p=deliverable%2Flinux.git [media] cx231xx: Add support for Hauppauge WinTV-HVR-900H (111xxx) Add support for: [2040:b138] Hauppauge WinTV HVR-900H (111xxx) The hardware is similar to [2040:b130] Hauppauge WinTV 930C-HD (model 1113xx) The only difference is the demod Si2161 instead of Si2165 (but both are supported by the si2165 driver). Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/cx231xx/cx231xx-cards.c b/drivers/media/usb/cx231xx/cx231xx-cards.c index 8039b769f258..a03a31a4b911 100644 --- a/drivers/media/usb/cx231xx/cx231xx-cards.c +++ b/drivers/media/usb/cx231xx/cx231xx-cards.c @@ -705,7 +705,7 @@ struct cx231xx_board cx231xx_boards[] = { }, }, [CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx] = { - .name = "Hauppauge WinTV 930C-HD (1113xx) / PCTV QuatroStick 521e", + .name = "Hauppauge WinTV 930C-HD (1113xx) / HVR-900H (111xxx) / PCTV QuatroStick 521e", .tuner_type = TUNER_NXP_TDA18271, .tuner_addr = 0x60, .tuner_gpio = RDE250_XCV_TUNER, @@ -815,6 +815,9 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx}, {USB_DEVICE(0x2040, 0xb131), .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx}, + /* Hauppauge WinTV-HVR-900-H */ + {USB_DEVICE(0x2040, 0xb138), + .driver_info = CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx}, {USB_DEVICE(0x2040, 0xb140), .driver_info = CX231XX_BOARD_HAUPPAUGE_EXETER}, {USB_DEVICE(0x2040, 0xc200),