From: Alexander Shiyan Date: Sat, 15 Feb 2014 11:35:18 +0000 (+0400) Subject: ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=5ee49a117c88d95e7cff86a5cd956c4420988c03;p=deliverable%2Flinux.git ARM: dts: imx27-phytec-phycore: Add diagnostic PMIC LEDs PCM-038 module have three triple LEDs connected to PMIC which can be used for diagnostic purposes. This patch adds support for these LEDs for PCM-038 SOM and adds basic LED-triggers for these LEDs for PCM-970 RDK, the remaining LEDs are available for use from userspace. Signed-off-by: Alexander Shiyan Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 9f8ad51d2ed9..9a0754300685 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -96,6 +96,56 @@ status = "okay"; }; +&pmicleds { + ledr1: led@3 { + reg = <3>; + label = "system:red1:user"; + }; + + ledg1: led@4 { + reg = <4>; + label = "system:green1:user"; + }; + + ledb1: led@5 { + reg = <5>; + label = "system:blue1:user"; + }; + + ledr2: led@6 { + reg = <6>; + label = "system:red2:user"; + }; + + ledg2: led@7 { + reg = <7>; + label = "system:green2:user"; + }; + + ledb2: led@8 { + reg = <8>; + label = "system:blue2:user"; + }; + + ledr3: led@9 { + reg = <9>; + label = "system:red3:nand"; + linux,default-trigger = "nand-disk"; + }; + + ledg3: led@10 { + reg = <10>; + label = "system:green3:live"; + linux,default-trigger = "heartbeat"; + }; + + ledb3: led@11 { + reg = <11>; + label = "system:blue3:cpu"; + linux,default-trigger = "cpu0"; + }; +}; + &sdhci2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sdhc2>; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 230cfafa6bd9..258eafa722c1 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -69,6 +69,12 @@ fsl,mc13xxx-uses-adc; fsl,mc13xxx-uses-rtc; + pmicleds: leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x001 0x000 0x000 0x000 0x000 0x000>; + }; + regulators { /* SW1A and SW1B joined operation */ sw1_reg: sw1a {