From: Alexander Shiyan <shc_work@mail.ru>
Date: Sat, 30 Nov 2013 06:18:02 +0000 (+0400)
Subject: ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=5f9fe2448e29a69698a3e004d9275bd00726f387;p=deliverable%2Flinux.git

ARM: dts: imx27-phytec-phycore-rdk: Add DT node for camera module

This patch adds first I2C bus and PCA9536 device.
This device is used on Phytec PCM-970 RDK camera addon module.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 959dddf60d1f..be7667e73a2e 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,8 +19,30 @@
 	cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
 };
 
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	camgpio: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &iomuxc {
 	imx27_phycore_rdk {
+		pinctrl_i2c1: i2c1grp {
+			/* Add pullup to DATA line */
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA	0x1
+				MX27_PAD_I2C_CLK__I2C_CLK	0x0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX27_PAD_UART1_TXD__UART1_TXD 0x0