From: Tom Tromey Date: Sat, 5 Oct 2019 22:39:44 +0000 (-0600) Subject: Move readline to the readline/readline subdirectory X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=6999161a2a3b;p=deliverable%2Fbinutils-gdb.git Move readline to the readline/readline subdirectory readline turns out to be a bit of a stumbling block for the project to move gdbsupport (and then gdbserver) to the top-level. The issue is that readline headers are intended to be included with names like "readline/readline.h". To support this, gdb effectively adds a -I option pointing to the top-level source directory -- but, importantly, this option is not used when the system readline is used. For gdbsupport, a -I option like this would always be needed, but that in turn would break the system readline case. This was PR build/17077, fixed in commit a8a5dbcab8df0b3a9e04745d4fe8d64740acb323. Previously, we had discussed this on the gdb-patches list in terms of removing readline from the tree https://sourceware.org/ml/gdb-patches/2019-09/msg00317.html However, Eli expressed some concerns, and Joel did as well (off-list). Given those concerns, and the fact that a patch-free local readline is relatively new in gdb (it was locally patched for years), I changed my mind and decided to handle this situation by moving the readline sources down a level. That is, upstream readline is now in readline/readline, and the top-level readline directory just contains the minimal configury needed to build that. This fixes the problem because, when gdb unconditionally adds a -I$(top_srcdir), this will not find readline headers. A separate -I will be needed instead, which is exactly what's needed for --with-system-readline. gdb/ChangeLog 2019-10-23 Tom Tromey * Makefile.in (READLINE_DIR): Update. gdb/doc/ChangeLog 2019-10-23 Tom Tromey * Makefile.in (READLINE_DIR): Update. readline/ChangeLog 2019-10-23 Tom Tromey Move old contents to readline/ subdirectory. * aclocal.m4, configure, configure.ac, .gitignore, Makefile.am, Makefile.in, README: New files. Change-Id: Ice156a2ee09ea68722b48f64d97146d7428ea9e4 --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index a976d8f9a7..7dd596e72c 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,7 @@ +2019-10-23 Tom Tromey + + * Makefile.in (READLINE_DIR): Update. + 2019-10-23 Tankut Baris Aktemur * infcall.c (call_function_by_hand_dummy): Fix the function diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 553b3ffdc4..fe599b417e 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -174,8 +174,8 @@ LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR) LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC) -# Where is the READLINE library? Typically in ../readline. -READLINE_DIR = ../readline +# Where is the READLINE library? Typically in ../readline/readline. +READLINE_DIR = ../readline/readline READLINE_SRC = $(srcdir)/$(READLINE_DIR) READLINE = @READLINE@ READLINE_DEPS = @READLINE_DEPS@ diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index b81c2cca0d..0d0d905494 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,7 @@ +2019-10-23 Tom Tromey + + * Makefile.in (READLINE_DIR): Update. + 2019-10-23 Christian Biesinger * python.texi (Threads In Python): Add a note for how to get the diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in index 2bb8a3051b..2673499a05 100644 --- a/gdb/doc/Makefile.in +++ b/gdb/doc/Makefile.in @@ -74,7 +74,7 @@ BUGURL_TEXI = @REPORT_BUGS_TEXI@ # Where is the source dir for the READLINE library doc? # Traditionally readline is in .. or . -READLINE_DIR = ${gdbdir}/../readline/doc +READLINE_DIR = ${gdbdir}/../readline/readline/doc READLINE_TEXI_INCFLAG = @READLINE_TEXI_INCFLAG@ # The GDB/MI docs come from a sibling directory ../mi diff --git a/readline/.gitignore b/readline/.gitignore index be107bbad4..5f060a1362 100644 --- a/readline/.gitignore +++ b/readline/.gitignore @@ -1,37 +1,4 @@ -Makefile - -*.o -*.a -*.so -*.sl -*.dll - +autom4te.cache config.cache -config.h config.log config.status - -doc/Makefile -examples/Makefile -shlib/Makefile - -examples/fileman -examples/hist_erasedups -examples/hist_purgecmd -examples/histexamp -examples/rl -examples/rl-callbacktest -examples/rlbasic -examples/rlcat -examples/rlevent -examples/rltest -examples/rlversion - -libhistory.so.* -libreadline.so.* - -*.dylib - -readline.pc - -stamp-h diff --git a/readline/CHANGELOG b/readline/CHANGELOG deleted file mode 100644 index 18265ab105..0000000000 --- a/readline/CHANGELOG +++ /dev/null @@ -1,1353 +0,0 @@ -[Readline-specific changelog. Descriptions of changes to the source are - found in the bash changelog.] - - 6/9 - --- -Makefile.in - - quote value of ${INSTALL_DATA} when passing it to makes in - subdirectories - - 7/1 - --- -Makefile.in - - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let - autoconf set the value itself in the Makefile - - removed a stray `-' before $(RANLIB) in the `install' recipe - -doc/Makefile.in - - add a VPATH assignment so the documentation is not remade if it's - already up-to-date in the distribution - -configure.in - - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains - @LOCAL_LDFLAGS@ - - 7/9 - --- - -config.h.in - - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and - STRUCT_WINSIZE_IN_TERMIOS - -configure.in - - call BASH_STRUCT_WINSIZE to look for the definition of - `struct winsize' - - 7/17 - ---- -configure.in - - call AC_MINIX - -config.h.in - - add define line for AC_MINIX - - 7/18 - ---- -Makefile.in - - add `install-shared' and `uninstall-shared' targets - - 8/4 - --- -Makefile.in - - install and uninstall libhistory.a in the `install' and - `uninstall' targets - - 9/4 - --- -configure.in - - bumped LIBVERSION up to 2.1.1, indicating that this is patch - level 1 to release 2.1 - - - 9/16 - ---- -Makefile.in - - `make distclean' now descends into the `examples' subdir - -doc/Makefile.in - - the `distclean' and `maintainer-clean' targets should remove - Makefile - -examples/Makefile.in - - added the various clean targets - - 4/2 - --- -configure.in - - bumped LIBVERSION up to 2.2 - - 4/18 - ---- -[readline-2.2 released] - - 4/20 - ---- -Makefile.in - - make `libhistory.a' a dependency of `install' - - fixed a typo in the recipe for `install' that copied libreadline.a - to libhistory.old right after installing it - - 4/27 - ---- -doc/Makefile.in - - install {readline,history}.info out of the source directory if - they are not found in the current (build) directory -- only an - issue if the libraries are built in a different directory than - the source directory - - 5/1 - --- -support/shobj-conf - - script from the bash distribution to do shared object and library - configuration - -shlib/Makefile.in - - new directory and makefile to handle building shared versions of - libreadline and libhistory, controlled by support/shobj-conf - - 5/7 - --- -doc/Makefile.in - - set SHELL to /bin/sh, rather than relying on make to be correct - - 5/14 - ---- -savestring.c - - new file, moved from shell.c, for backwards compatibility - -Makefile.in, shlib/Makefile.in - - make sure savestring.c is compiled and added to libreadline and - libhistory - -[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.] - - 5/15 - ---- -README - - updated description of shared library creation for the new scheme - -[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.] - -Makefile.in - - bumped SHLIB_MAJOR up to 4 since we've augmented the library - API - - rlconf.h is now one of the installed headers, so applications can - find out whether things like vi-mode are available in the installed - libreadline - - 5/20 - ---- -configure.in - - changed RL_LIBRARY_VERSION to 4.0 to match the version of the - installed shared libraries - - 6/5 - --- -rlstdc.h - - new file - -Makefile.in - - rlstdc.h is now one of the installed headers - - 8/3 - --- -shlib/Makefile.in - - made the suffix rule that creates xx.so from xx.c write the - compiler output to `a.o', which is then mv'd to xx.so, because - some compilers (Sun WSpro 4.2, for example) don't allow any - suffixes other than `.o' for `cc -c' (not even `a.out') - - 9/15 - ---- - -Makefile.in - - AR and ARFLAGS are now substituted by configure, used in recipes - that build the libraries - -configure.in - - use AC_CHECK_PROG to check for ar - - set ARFLAGS if it has not already been set in the environment - - 10/5 - ---- -Makefile.in - - removed savestring.o from object file list - - 10/28 - ----- -shlib/Makefile.in - - don't use a fixed filename in the .c.so suffix rule to avoid - problems with parallel makes - - 12/21 - ----- -support/shlib-install - - new script to install shared readline and history libraries - -shlib/Makefile.in - - changed to call shlib-install for install and uninstall targets - -[readline-4.0-beta1 frozen] - - 12/22 - ----- -configure.in - - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS - -shlib/Makefile.in - - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure - - add $(SHLIB_LIBS) at end of command line that builds the shared - libraries (currently needed only by AIX 4.2) - - 12/31 - ----- -MANIFEST, MANIFEST.doc - - the TOC html files are no longer generated and no longer part of - the distribution - - 2/18/1999 - --------- -configure.in - - set MAKE_SHELL to /bin/sh and substitute into the Makefiles - -Makefile.in,{doc,examples,shlib}/Makefile.in - - set SHELL from @MAKE_SHELL@ - -[readline-4.0 released] - - 3/11 - ---- -doc/Makefile.in - - removed references to HTMLTOC, since separate HTML table-of-contents - files are no longer created - -examples/Makefile.in - - remove `*.exe' in clean target for MS-DOS - -Makefile.in - - make `readline' target depend on ./libreadline.a - - configure now substitutes TERMCAP_LIB into Makefile.in - - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline' - - clean target now removes readline and readline.exe in case they - get built - -configure.in - - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP - - 3/15 - ---- -support/shlib-install - - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2 - - changes for installing on hp-ux 1[01].x - - 3/23 - ---- -configure.in - - make sure that the $CC argument to shobj-conf is quoted - - 4/8 - --- - -xmalloc.h, rlprivate.h, rlshell.h - - new files - -Makefile.in,shlib/Makefile.in - - add dependencies on xmalloc.h, rlshell.h - - add xmalloc.h, rlprivate.h, rlshell.h to list of header files - -MANIFEST - - add xmalloc.h, rlprivate.h, rlshell.h - - 4/9 - --- -Makefile.in,shlib/Makefile.in - - add dependencies on rlprivate.h - - 4/13 - ---- -doc/Makefile.in - - add variable, PSDVI, which is the desired resolution of the - generated postscript files. Set to 300 because I don't have - any 600-dpi printers - - set LANGUAGE= before calling makeinfo, so messages are in English - - add rluserman.{info,dvi,ps,html} to appropriate variables - - add rules to create rluserman.{info,dvi,ps,html} - - install and uninstall rluserman.info, but don't update the directory - file in $(infodir) yet - -MANIFEST - - add doc/rluserman.{texinfo,info,dvi,ps,html} - - 4/30 - ---- -configure.in - - updated library version to 4.1 - - 5/3 - --- -configure.in - - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are - constructed from $LIBRARY_VERSION and substituted into Makefiles - - 5/5 - --- -support/shlib-install - - OSF/1 installs shared libraries like Solaris - -Makefile.in - - broke the header file install and uninstall into two new targets: - install-headers and uninstall-headers - - install and uninstall depend on install-headers and uninstall-headers - respectively - - changed install-shared and uninstall-shared targets to depend on - install-headers and uninstall-headers, respectively, so users may - choose to install only the shared libraries. I'm not sure about - the uninstall one yet -- maybe it should check whether or not - the static libraries are installed and not remove the header files - if they are - - 9/3 - --- -configure.in, config.h.in - - added test for memmove (for later use) - - changed version to 4.1-beta1 - - 9/13 - ---- -examples/rlfe.c - - Per Bothner's `rlfe' readline front-end program - -examples/Makefile.in - - added rules to build rlfe - - 9/21 - ---- -support/shlib-install - - changes to handle FreeBSD-3.x elf or a.out shared libraries, which - have different semantics and need different naming conventions - - 1/24/2000 - --------- -doc/Makefile.in - - remove *.bt and *.bts on `make clean' - - 2/4 - --- - - -configure.in - - changed LIBVERSION to 4.1-beta5 - - 3/17/2000 - --------- -[readline-4.1 released] - - 3/23 - ---- -Makefile.in - - remove the `-t' argument to ranlib in the install recipe; some - ranlibs don't have it and attempt to create a file named `-t' - - 3/27 - ---- -support/shlib-install - - install shared libraries unwritable by anyone on HP-UX - - changed symlinks to relative pathnames on all platforms - -shlib/Makefile.in - - added missing `includedir' assignment, substituted by configure - -Makefile.in - - added missing @SET_MAKE@ so configure can set $MAKE appropriately - -configure.in - - add call to AC_PROG_MAKE_SET - - 8/30 - ---- -shlib/Makefile.in - - change the soname bound into the shared libraries, so it includes - only the major version number. If it includes the minor version, - programs depending on it must be rebuilt (which may or may not be - a bad thing) - - 9/6 - --- -examples/rlfe.c - - add -l option to log input and output (-a option appends to logfile) - - add -n option to set readline application name - - add -v, -h options for version and help information - - change a few things because getopt() is now used to parse arguments - - 9/12 - ---- -support/shlib-install - - fix up the libname on HPUX 11 - - 10/18 - ----- -configure.in - - changed library version to 4.2-alpha - - 10/30 - ----- -configure.in - - add -fsigned-char to LOCAL_CFLAGS for Linux running on the IBM - S/390 - -Makefile.in - - added new file, rltypedefs.h, installed by default with `make install' - - 11/2 - ---- -compat.c - - new file, with backwards-compatibility function definitions - -Makefile.in,shlib/Makefile.in - - make sure that compat.o/compat.so are built and linked apppropriately - -support/shobj-conf - - picked up bash version, which means that shared libs built on - linux and BSD/OS 4.x will have an soname that does not include - the minor version number - - 11/13 - ----- -examples/rlfe.c - - rlfe can perform filename completion for relative pathnames in the - inferior process's context if the OS supports /proc/PID/cwd (linux - does it OK, Solaris is slightly warped, none of the BSDs have it) - - 11/17/2000 - ---------- -[readline-4.2-alpha released] - - 11/27 - ----- -Makefile.in,shlib/Makefile.in - - added dependencies for rltypedefs.h - -shlib/Makefile.in - - changed dependencies on histlib.h to $(topdir)/histlib.h - - 1/22 - ---- -configure.in - - changed release version to 4.2-beta - - 2/2 - --- -examples/Makefile.in - - build histexamp as part of the examples - - 2/5 - --- -doc/Makefile.in - - don't remove the dvi, postscript, html, info, and text `objects' - on a `make distclean', only on a `make maintainer-clean' - - 3/6 - --- -doc/history.{0,3}, doc/history_3.ps - - new manual page for history library - -doc/Makefile.in - - rules to install and uninstall history.3 in ${man3dir} - - rules to build history.0 and history_3.ps - - 4/2 - --- -configure.in - - changed LIBVERSION to `4.2' - - 4/5 - --- -[readline-4.2 frozen] - - 4/9 - --- -[readline-4.2 released] - - 5/2 - --- -Makefile.in,{doc,examples,shlib}/Makefile.in - - added support for DESTDIR installation root prefix, to support - building packages - -doc/Makefile.in - - add an info `dir' file entry for rluserman.info on `make install' - - change man1ext to `.1' and man3ext to `.3' - - install man pages with a $(man3ext) extension in the target directory - - add support for installing html documentation if `htmldir' has a - value - -Makefile.in - - on `make install', install from the `shlib' directory, too - - on `make uninstall', uninstall in the `doc' and `shlib' - subdirectories, too - -support/shlib-install - - add `freebsdelf*', `freebsdaout*', Hurd, `sysv4*', `sysv5*', `dgux*' - targets for symlink creation - - 5/7 - --- -configure.in, config.h.in - - check for , define HAVE_LIMITS_H if found - - 5/8 - --- -aclocal.m4 - - pick up change to BASH_CHECK_LIB_TERMCAP that adds check for - libtinfo (termcap-specific portion of ncurses-5.2) - - 5/9 - --- -configure.in - - call AC_C_CONST to find out whether or not the compiler supports - `const' - -config.h.in - - placeholder for `const' define, if any - - 5/10 - ---- -configure.in - - fix AC_CHECK_PROG(ar, ...) test to specify right value for the - case where ar is not found; should produce a better error message - - 5/14 - ---- -configure.in,config.h.in - - check for vsnprintf, define HAVE_VSNPRINTF if found - - 5/21 - ---- -configure.in, config.h.in - - add checks for size_t, ssize_t - - 5/30 - ---- -configure.in - - update autoconf to version 2.50, use in AC_PREREQ - - changed AC_INIT to new flavor - - added AC_CONFIG_SRCDIR - - AC_CONFIG_HEADER -> AC_CONFIG_HEADERS - - call AC_C_PROTOTYPES - - AC_RETSIGTYPE -> AC_TYPE_SIGNAL - - 8/22 - ---- -configure.in - - updated the version number to 4.2a - -Makefile.in,shlib/Makefile.in - - make sure tilde.o is built -DREADLINE_LIBRARY when being built as - part of the standalone library, so it picks up the right include - files - - 8/23 - ---- -support/shlib-install - - support for Darwin/MacOS X shared library installation - - 9/24 - ---- -examples/readlinebuf.h - - a new file, a C++ streambuf interface that uses readline for I/O. - Donated by Dimitris Vyzovitis - - 10/9 - ---- -configure.in - - replaced call to BASH_HAVE_TIOCGWINSZ with AC_HEADER_TIOCGWINSZ - -[readline-4.2a-beta1 frozen] - - 10/15 - ----- -configure.in, config.h.in - - check for , define HAVE_MEMORY_H if found - - check for , define HAVE_STRINGS_H if found - - 10/18 - ----- -configure.in, config.h.in - - check for isascii, define HAVE_ISASCII if found - -configure.in - - changed the macro names from bash as appropriate: - BASH_SIGNAL_CHECK -> BASH_SYS_SIGNAL_VINTAGE - BASH_REINSTALL_SIGHANDLERS -> BASH_SYS_REINSTALL_SIGHANDLERS - BASH_MISC_SPEED_T -> BASH_CHECK_SPEED_T - - 10/22 - ----- -configure.in - - check for isxdigit with AC_CHECK_FUNCS - -config.h.in - - new define for HAVE_ISXDIGIT - - 10/29 - ----- -configure.in, config.h.in - - check for strpbrk with AC_CHECK_FUNCS, define HAVE_STRPBRK if found - - 11/1 - ---- -Makefile.in - - make sure DESTDIR is passed to install and uninstall makes in - subdirectories - - when saving old copies of installed libraries, make sure we use - DESTDIR for the old installation tree - -[readline-4.2a-rc1 frozen] - - 11/2 - ---- -Makefile.in, shlib/Makefile.in - - don't put -I$(includedir) into CFLAGS - - 11/15 - ----- -[readline-4.2a released] - - 11/20 - ----- -examples/rlcat.c - - new file - -examples/Makefile.in - - changes for rlcat - - 11/28 - ----- -configure.in - - default TERMCAP_LIB to -lcurses if $prefer_curses == yes (as when - --with-curses is supplied) - -examples/Makefile.in - - substitute @LDFLAGS@ in LDFLAGS assignment - - 11/29 - ----- -config.h.in - - add necessary defines for multibyte include files and functions - - add code to define HANDLE_MULTIBYTE if prerequisites are met - -configure.in - - call BASH_CHECK_MULTIBYTE - - 12/14 - ----- -config.h.in - - add #undef PROTOTYPES, filled in by AC_C_PROTOTYPES - - 12/17 - ----- -config.h.in - - moved HANDLE_MULTIBYTE code to rlmbutil.h - -rlmbutil.h, mbutil.c - - new files - -Makefile.in, shlib/Makefile.in - - added rules for mbutil.c - - 12/20 - ----- -configure.in - - added --enable-shared, --enable-static options to configure to - say which libraries are built by default (both default to yes) - - if SHLIB_STATUS == 'unsupported', turn off default shared library - building - - substitute new STATIC_TARGET, SHARED_TARGET, STATIC_INSTALL_TARGET, - and SHARED_INSTALL_TARGET - -Makefile.in - - `all' target now depends on (substituted) @STATIC_TARGET@ and - @SHARED_TARGET@ - - `install' target now depends on (substituted) @STATIC_INSTALL_TARGET@ - and @SHARED_INSTALL_TARGET@ - -INSTALL, README - - updated with new info about --enable-shared and --enable-static - - 1/10/2002 - --------- -configure.in - - bumped the library version number to 4.3 - - 1/24 - ---- -Makefile.in,shlib/Makefile.in - - changes for new file, text.c, with character and text handling - functions from readline.c - - 2/20 - ---- -{configure.config.h}.in - - call AC_C_CHAR_UNSIGNED, define __CHAR_UNSIGNED__ if chars are - unsigned by default - - 5/20 - ---- -doc/Makefile.in - - new maybe-clean target that removes the generated documentation if - the build directory differs from the source directory - - distclean target now depends on maybe-clean - - 7/17 - ---- -[readline-4.3 released] - - 7/18 - ---- -shlib/Makefile.in - - fix bad dependency: text.so: terminal.c, make it depend on text.c - - 8/7 - --- -support/shlib-install - - break `linux' out into its own stanza: it seems that linux - distributions are all moving to the following scheme: - - libreadline.so.4.3 installed version - libreadline.so.4 -> libreadline.so.4.3 symlink - libreadline.so -> libreadline.so.4 symlink - - 10/29 - ----- -support/shlib-install - - change INSTALL_LINK[12] to use `&&' instead of `;' so it only - tries the link if the cd succeeds; put ${echo} in there, too - - use $LN instead of `ln -s' so it works on machines without symlinks - - change special linux stanza to use cd before ln also - - change to use $INSTALL_LINK1 and $INSTALL_LINK2 appropriately - instead of explicit commands in various stanzas - - 2/1 - --- -config.h.in - - add HAVE_MBRTOWC and HAVE_MBRLEN - - add NO_MULTIBYTE_SUPPORT for new configure argument - - add STDC_HEADERS - -configure.in - - new argument --enable-multibyte (enabled by default), allows - multibyte support to be turned off even on systems that support it - - add check for ansi stdc headers with call to AC_HEADER_STDC - - 2/3 - --- -configure.in - - add call to BASH_FUNC_CTYPE_NONASCII - -config.h.in - - add CTYPE_NON_ASCII - - 2/20 - ---- - -doc/manvers.texinfo - - renamed to version.texi to match other GNU software - - UPDATE-MONTH variable is now `UPDATED-MONTH' - -doc/{hist,rlman,rluserman}.texinfo - - include version.texi - -doc/{rltech,rluser,hstech,hsuser}.texi - - changed the suffix from `texinfo' to `texi' - -doc/Makefile.in - - made appropriate changes for {{rl,hs}tech,{rl,hs}user}.texi - -doc/{rlman,rluserman}.texinfo - - changed the suffix from `texinfo' to `texi' - -doc/hist.texinfo - - renamed to history.texi to be more consistent - - 6/11 - ---- -shlib/Makefile.in - - have configure substitute value of `@LDFLAGS@' into the assignment - to SHLIB_XLDFLAGS - - 6/16 - ---- -configure.in - - readline and history libraries are now at version 5.0 - - 8/18 - ---- -support/shlib-install - - support for FreeBSD-gnu (from Robert Millan) - - 12/4 - ---- -Makefile.in - - add variables for localedir and the PACKAGE_* variables, auto-set - by configure - - 12/9 - ---- -Makefile.in - - use mkinstalldirs instead of mkdirs - - 4/22 - ---- -Makefile.in - - separate doc install/uninstall out into two new targets: - install-doc and uninstall-doc - - make install-doc and uninstall-doc prerequisites of appropriate - install and uninstall targets - -examples/rl-fgets.c - - new example from Harold Levy that wraps fgets replacement functions - that call readline in a shared library that can be interposed with - LD_PRELOAD - - 7/27 - ---- -[readline-5.0 released] - - 11/15 - ----- -examples/rlfe/{ChangeLog,Makefile.in,README,config.h.in,configure,configure.in,extern.h,os.h,pty.c,rlfe.c,screen.h} - - new version of rlfe, rlfe-0.4, from Per Bothner; now a standalone - application - - 11/16 - ----- -shlib/Makefile.in - - substitute TERMCAP_LIB in from configure - -configure.in - - if SHLIB_LIBS doesn't include a termcap library (curses, ncurses, - termcap, termlib), append the value of $TERMCAP_LIB to it - - 11/30 - ----- -configure.in - - take out change from 11/16; it doesn't work for some systems (e.g., - SunOS 4.x and Solaris 2.6) - - add support for --enable-purify configure argument - - pass TERMCAP_LIB in environment when calling shobj-conf - -examples/Makefile.in - - add support for building examples with purify - - 1/23/2005 - --------- -configure.in - - set BUILD_DIR to contain backslashes to escape any spaces in the - directory name -- this is what make will accept in targets and - prerequisites, so it's better than trying to use double quotes - - 2/25 - ---- -configure.in - - change check for sys/ptem.h to include sys/stream.h if present, to - avoid the `present but cannot be compiled' messages on Solaris and - SVR4.2 (does anyone still use SVR4.2?) - - 5/7 - --- -configure.in - - add cross-compiling support from the bash configure.in, which cygwin - and mingw have apparently adopted - - add check for pwd.h, fcntl.h - - add checks for fcntl, kill system calls - - add checks for getpw{ent,nam,uid} C library functions - - pass a compile-time option through to Makefiles if cross-compiling - -config.h.in - - add HAVE_PWD_H for , HAVE_FCNTL_H for - - add HAVE_FCNTL, HAVE_KILL for respective system calls - - add HAVE_GETPW{ENT,NAM,UID} for passwd functions - -Makefile.in,shlib/Makefile.in - - @CROSS_COMPILE@ is substituted into DEFS (equal to -DCROSS_COMPILING - if bash is being cross-compiled) - - 8/2 - --- -examples/Makefile.in - - use $(READLINE_LIB) instead of -lreadline to get around MacOS X 10.4's - preference for (incompatible) shared libraries over static libraries - in the load path - - 8/11 - ---- -support/shobj-conf - - new variable: SHLIB_LIBPREF, prefix for shared library name (defaults - to `lib' - - new variable: SHLIB_DLLVERSION, used on Cygwin to set the library - version number - - new variable: SHLIB_DOT, separator character between library name and - suffix and version information (defaults to `.') - - new stanza for cygwin to generate windows-compatible dll - -support/shlib-install - - add new option `-b bindir' for systems like cygwin/windows that - require it - - new stanza for cygwin that installs a dll into $bindir and an implied - link library into $libdir - -configure.in - - substitute new variables from shobj-conf - -shlib/Makefile.in - - substitute bindir, SHLIB_DOT, SHLIB_LIBPREF, SHLIB_DLLVERSION from - configure - - pass `-b $(bindir)' to shlib-install for install and uninstall targets - - library names now use $SHLIB_LIBPREF and $SHLIB_DOT - -INSTALL,README - - document new SHLIB_DOT, SHLIB_LIBPREF, and SHLIB_DLLVERSION variables - - 10/4 - ---- -[readline-5.1-beta1 frozen] - - 12/1 - ---- -configure.in - - changed release status to `release' - -[readline-5.1 frozen] - - 12/9 - ---- -[readline-5.1 released] - - 12/14 - ----- -examples/rlfe/Makefile.in - - add @LIBS@ to LIBS assignment to pick up extra libraries from - configure - - 1/3/2006 - -------- -support/shlib-install - - Install shared libraries with execute bit set on Linux - - 6/9 - --- -[readline-5.2-alpha frozen] - - 6/26 - ---- -configure.in - - set CROSS_COMPILE to the empty string by default, so we don't inherit - a random value from the environment - - 7/8 - --- -[readline-5.2-alpha released] - - -[readline-5.2-beta released] - - 9/12 - ---- -config.h.in - - add defines for wcscoll, iswctype, iswupper, iswlower, towupper, - towlower functions - - replace define for wctomb with one for wcrtomb - - add defines for wchar_t, wint_t, wctype_t types - - 10/11 - ----- -[readline-5.2 released] - - 11/9 - ---- -examples/rlfe/{configure.in,Makefile.in,config.h.in,rlfe.c,pty.c} - - portability fixes from Mike Frysinger - - 11/21 - ----- -Makefile.in - - add `install-examples' and `uninstall-examples' targets - -examples/Makefile.in - - add correct variables to build examples on Windows - - add appropriate rules to install and uninstall example sources in - $(datadir)/readline - - 11/27 - ----- -config.h.in - - move #undef of HAVE_STRCOLL out of config.h.in, since autoconf tries - to substitute it based on configure tests - - 4/27/2007 - --------- -examples/autoconf - - new directory with example autoconf macros to detect readline and - return information about the installed version - - 6/13 - ---- -support/shlib-install - - changes to support AIX 5.x shared library installation - - 3/20/2008 - --------- -support/shlib-install - - add support for NetBSD and Interix shared library installation - - 4/22 - ---- -support/wcwidth.c - - updated implementation from 2007-05 - - 7/18 - ---- -support/shlib-install - - support for mingw32, contributed by Carlo Bramix - - 8/4 - --- -configure.in - - changed to readline-6.0 - - 8/18 - ---- -support/config.{guess,sub} - - updated to newer versions from autoconf-2.62 distribution - - 3/5/2009 - -------- -support/shlib-install - - take a new -V host_vendor argument - - add ${host_vendor} to string tested in case statement for symlink - creation section - - add support for FreeBSD/gentoo, which uses Linux library naming - scheme - - change FreeBSD symlink rules, since FreeBSD 7+ has only ELF shared - libraries. DragonflyBSD rules are the same. Fix from Timothy - Redaelli - -shlib/Makefile.in - - add definition of host_vendor, substituted by configure - - add -V host_vendor argument to all invocations of shlib-install. - Fix from Timothy Redaelli - - 3/10 - ---- -configure.in - - add call to AC_SYS_LARGEFILE for readdir and largefile support on - Linux - -config.h.in - - add _FILE_OFFSET_BITS define - - 4/19 - ---- -Makefile.in - - add targets for making and installing documentation required by GNU - coding standards. Fix from Joseph Myers - -posixselect.h - - pick up from bash. Inspired by Mike Frysinger - - 10/28 - ----- -support/shlib-install - - decrease the default version of FreeBSD that installs shared libraries - to 4.x. Advice from Peter Jeremy - - 12/18 - ----- -[readline-6.1-rc1 released] - - 12/23 - ----- -doc/Makefile.in - - make sure $(topdir) is not ".." before removing all of the formatted - documentation in `make distclean'. $(topdir) is set to `..' if - readline is being built in the source directory. Fixes problem - noticed by THOUMIN Damien - - 12/29 - ----- -[readline-6.1 frozen] - - 2/5/2010 - -------- -examples/Makefile.in - - make sure to install example C files using $(srcdir)/$$f in case - we're building outside the source directory. Bug report and fix - from Peter Breitenlohner - - 7/25 - ---- -xfree.c - - new file with xfree() implementation, moved from xmalloc.c - - 12/28 - ----- -{examples,shlib}/Makefile.in - - Cygwin-based changes from Eric Blake - - 3/26/2011 - --------- -Makefile.in - - don't ignore failures when building, installing, or cleaning in - the shlib subdirectory. Sample patch from Mike Frysinger - - -shlib/Makefile.in - - split the install and uninstall targets into install-supported and - install-unsupported targets that depend on the value of - SHLIB_STATUS - - 4/2 - --- -{,shlib}/Makefile.in - - add dependency for callback.o/callback.so on xmalloc.h. From - Jan Kratochvil - -{,doc,examples,shlib}/Makefile.in - - fix typo: htm target should be html. From Jan Kratochvil - - - remove `.' from VPATH. From Jan Kratochvil - - -examples/rlfe/configure.in - - quote AC_PROGRAM_SOURCE. From Jan Kratochvil - - - 5/17 - ---- -config.h.in - - WCWIDTH_BROKEN: new define, picked up from bash, defined on systems - where wcwidth returns 1 for Unicode combining characters - - 11/28 - ----- -support/shlib-install - - make sure solaris2 systems make the installed shared library - executable. ldd warns about it otherwise. Bug and fix from - Tim Mooney - -examples/hist_erasedups.c - - new example program, shows how to erase duplicates from the history - list - -examples/hist_purgecmd.c - - new example program, shows how to remove all entries matching a - string or pattern from the history list - - 1/12/2012 - --------- -colors.[ch],parse-colors.[ch]} - - new files, part of color infrastructure support - -Makefile.in,shlib/Makefile.in - - arrange to have colors.o and parse-colors.o added to library - (static and shared versions) - -{configure,config.h}.in - - check for stdbool.h, define HAVE_STDBOOL_H if found - -rldefs.h - - COLOR_SUPPORT: if defined, compile in colors.c and parse-colors.c - for color support - - 1/18 - ---- - -{configure,config.h}.in - - new check: check for AUDIT_USER_TTY defined in , - define HAVE_DECL_AUDIT_USER_TTY if both are found - - 8/7 - --- -configure.in - - AC_CANONICAL_BUILD: call to set the build_xxx variables - - use $build_os instead of $host_os to decide when DJGPP should run - `pwd.exe' to figure out the build directory. Report and fix from - Yao Qi - - 8/29 - ---- -configure.ac - - new name for configure.in - -MANIFEST,Makefile.in - - configure.in -> configure.ac - - 1/5/2013 - -------- -configure.ac - - move version number up to 6.3 - - 1/31 - ---- -configure.ac - - use AC_CHECK_TOOL instead of AC_CHECK_PROG to check for ar, since it - will find $host-prefixed versions of utilities. Report and fix from - Mike Frysinger - - 3/4 - --- -Makefile.in - - PACKAGE_TARNAME, docdir: new variables substituted by autoconf - - OTHER_DOCS,OTHER_INSTALLED_DOCS: new variables with auxiliary - documentation files to be installed into $(docdir) - - install: add new rule to install $(OTHER_DOCS) - - uninstall: add new rule to uninstall $(docdir)/$(OTHER_INSTALLED_DOCS) - - 4/29 - ---- -Makefile.in - - installdirs: make sure to create $(DESTDIR)$(docdir). Report from - - - 1/27/2014 - --------- -Makefile.in - - install-examples: should not depend on `shared', since the examples - themselves are not built using shared libraries. Report from - - -support/shobj-conf - - [from bash] darwin: changed the install_name embedded into the - shared library to contain only the major version number, not the - minor one. The idea is that the minor versions should all be API/ABI - compatible, and it is better to link automatically with the latest - one. Idea from Max Horn - - 2/26/2014 - --------- -[readline-6.3 released] - - 3/14 - ---- -shlib/Makefile.in - - fix typo in dependency list for vi_mode.so: it should not depend on - just $(topdir). Report and fix from Natanael Copa - - - 4/15 - ---- -{.,shlib,examples}/Makefile.in - - make sure $(INCLUDES) appears before $(CPPFLAGS) in the various - CFLAGS assignments so readline looks in its own source and build - directories (INCLUDES) before some directories specified by the - user or builder (CPPFLAGS). Report and fix from Max Horn - - - 6/2 - --- -config.h.in - - use correct symbols: HAVE_STRUCT_DIRENT_D_INO, HAVE_STRUCT_DIRENT_D_FILENO - HAVE_STRUCT_DIRENT_D_NAMLEN. They don't really matter, but they are - what posixdir.h looks for. Report from Ross Burton - - 6/11 - ---- -readline.pc.in - - new file, config file for pkgconfig. Patch to add from Jirka Klimes - - -{MANIFEST,configure.ac,Makefile.in} - - readline.pc: changes to create file for pkgconfig - - 10/13 - ----- -doc/Makefile.in - - readline.pdf, history.pdf, rluserman.pdf: use texi2dvi --pdf to generate - these. Suggestion from Siep Kroonenberg - - 11/29 - ----- -config.h.in - - HAVE_PSELECT: define if pselect(2) available - -configure.ac - - check for pselect(2), define HAVE_PSELECT if found - - 12/29 - ----- -configure.ac - - bump version number up to 6.4 - - 1/6/2015 - -------- -configure.ac,config.h.in - - look for ncurses/termcap.h, define HAVE_NCURSES_TERMCAP_H - - 4/20 - ---- -configure.ac - - add template definitions set by AC_USE_SYSTEM_EXTENSIONS from a report - from Andreas Schwab - - 4/24 - ---- -configure.ac,config.h.in - - add check for sys/ioctl.h to AC_CHECK_HEADERS, define HAVE_SYS_IOCTL_H - if found - - 5/29 - ---- -configure.ac - - bump library version to 7.0 because of addition of rl_callback_sigcleanup - - 8/26 - ---- -configure.ac,Makefile.in,examples/Makefile.in - - remove references to purify - - 11/21 - ----- -configure.ac,config.h.in - - fnmatch: check for libc function, define HAVE_FNMATCH if found. Now - used by vi-mode history search functions - - 7/12 - ---- -Makefile.in,examples/Makefile.in - - add support for building with address sanitizer, using new target - `asan' - - 4/23/2018 - --------- -configure.ac - - TERMCAP_PKG_CONFIG_LIB: new variable, defined from TERMCAP_LIB, - defaults to termcap - -readline.pc.in - - change Requires.private to use TERMCAP_PKG_CONFIG_LIB instead of - hardcoded `tinfo'. Report and fix from Thomas Petazzoni - - - 5/4 - --- -Makefile.in - - new targets to install and uninstall the `readline.pc' pkgconfig - file - - install-{static,shared}: add install-pc to the list of prereqs - - uninstall{,-shared}: add uninstall-pc to list of prereqs. Change - from Thomas Petazzoni - -configure.ac,Makefile.in - - add new configure option to optionally disable installing the - source code examples. From Thomas Petazzoni - - 5/23 - ---- -Makefile.in - - install-pc: make sure we install readline.pc into an existing - pkgconfig directory. Report from ilove zfs - - 5/24 - ---- -Makefile.in - - installdirs: create $(pkgconfigdir) if it doesn't exist diff --git a/readline/CHANGES b/readline/CHANGES deleted file mode 100644 index 09eab6ee03..0000000000 --- a/readline/CHANGES +++ /dev/null @@ -1,1704 +0,0 @@ -This document details the changes between this version, readline-8.0, and the -previous version, readline-7.0. - -1. Changes to Readline - -a. Added a guard to prevent nested macros from causing an infinite expansion - loop. - -b. Instead of allocating enough history list entries to hold the maximum list - size, cap the number allocated initially. - -c. Added a strategy to avoid allocating huge amounts of memory if a block of - history entries without timestamps occurs after a block with timestamps. - -d. Added support for keyboard timeouts when an ESC character is the last - character in a macro. - -e. There are several performance improvements when in a UTF-8 locale. - -f. Readline does a better job of preserving the original set of blocked - signals when using pselect() to wait for input. - -g. Fixed a bug that caused multibyte characters in macros to be mishandled. - -h. Fixed several bugs in the code that calculates line breaks when expanding - prompts that span several lines, contain multibyte characters, and contain - invisible character seqeuences. - -i. Fixed several bugs in cursor positioning when displaying lines with prompts - containing invisible characters and multibyte characters. - -j. When performing case-insensitive completion, Readline no longer sorts the - list of matches unless directed to do so. - -k. Fixed a problem with key sequences ending with a backslash. - -l. Fixed out-of-bounds and free memory read errors found via fuzzing. - -m. Fixed several cases where the mark was set to an invalid value. - -n. Fixed a problem with the case-changing operators in the case where the - lower and upper case versions of a character do not have the same number - of bytes. - -o. Handle incremental and non-incremental search character reads returning EOF. - -p. Handle the case where a failing readline command at the end of a multi-key - sequence could be misinterpreted. - -q. The history library now prints a meaningful error message if the history - file isn't a regular file. - -r. Fixed a problem with vi-mode redo (`.') on a command when trying to replace - a multibyte character. - -s. The key binding code now attempts to remove a keymap if a key unbinding - leaves it empty. - -t. Fixed a line-wrapping issue that caused problems for some terminal - emulators. - -u. If there is a key bound to the tty's VDISCARD special character, readline - disables VDISCARD while it is active. - -v. Fixed a problem with exiting bracketed paste mode on terminals that assume - the bracketed paste mode character sequence contains visible characters. - -w. Fixed a bug that could cause a key binding command to refer to an - uninitialized variable. - -x. Added more UTF-8-specific versions of multibyte functions, and optimized - existing functions if the current locale uses UTF-8 encoding. - -y. Fixed a problem with bracketed-paste inserting more than one character and - interacting with other readline functions. - -z. Fixed a bug that caused the history library to attempt to append a history - line to a non-existent history entry. - -aa. If using bracketed paste mode, output a newline after the \r that is the - last character of the mode disable string to avoid overwriting output. - -bb. Fixes to the vi-mode `b', `B', `w', `W', `e', and `E' commands to better - handle multibyte characters. - -cc. Fixed a redisplay problem that caused an extra newline to be generated on - accept-line when the line length is exactly the screenwidth. - -dd. Fixed a bug with adding multibyte characters to an incremental search - string. - -ee. Fixed a bug with redoing text insertions in vi mode. - -ff. Fixed a bug with pasting text into an incremental search string if bracketed - paste mode is enabled. ESC cannot be one of the incremental search - terminator characters for this to work. - -gg. Fixed a bug with anchored search patterns when performing searches in vi - mode. - -2. New Features in Readline - -a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as - Posix specifies (uses fnmatch(3) if available). - -b. There are new `next-screen-line' and `previous-screen-line' bindable - commands, which move the cursor to the same column in the next, or previous, - physical line, respectively. - -c. There are default key bindings for control-arrow-key key combinations. - -d. A negative argument (-N) to `quoted-insert' means to insert the next N - characters using quoted-insert. - -e. New public function: rl_check_signals(), which allows applications to - respond to signals that readline catches while waiting for input using - a custom read function. - -f. There is new support for conditionally testing the readline version in an - inputrc file, with a full set of arithmetic comparison operators available. - -g. There is a simple variable comparison facility available for use within an - inputrc file. Allowable operators are equality and inequality; string - variables may be compared to a value; boolean variables must be compared to - either `on' or `off'; variable names are separated from the operator by - whitespace. - -h. The history expansion library now understands command and process - substitution and extended globbing and allows them to appear anywhere in a - word. - -i. The history library has a new variable that allows applications to set the - initial quoting state, so quoting state can be inherited from a previous - line. - -j. Readline now allows application-defined keymap names; there is a new public - function, rl_set_keymap_name(), to do that. - -k. The "Insert" keypad key, if available, now puts readline into overwrite - mode. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-7.0, and the -previous version, readline-6.3. - -1. Changes to Readline - -a. A bug that caused vi-mode `.' to be unable to redo `c', `d', and `y' - commands with modifiers was fixed. - -b. Fixed a bug that caused callback mode to dump core when reading a - multiple-key sequence (e.g., arrow keys). - -c. Fixed a bug that caused the redisplay code to erase some of the line when - using horizontal scrolling with incremental search. - -d. Readline's input handler now performs signal processing if read(2) is - interrupted by SIGALRM or SIGVTALRM. - -e. Fixed a problem with revert-all-at-newline freeing freed memory. - -f. Clarified the documentation for the history_quotes_inhibit_expansion - variable to note that it inhibits scanning for the history comment - character and that it only affects double-quoted strings. - -g. Fixed an off-by-one error in the prompt printed when performing searches. - -h. Use pselect(2), if available, to wait for input before calling read(2), so - a SIGWINCH can interrupt it, since it doesn't interrupt read(2). - -i. Some memory leaks caused by signals interrupting filename completion have - been fixed. - -j. Reading EOF twice on a non-empty line causes EOF to be returned, rather - than the partial line. This can cause partial lines to be executed on - SIGHUP, for example. - -k. Fixed a bug concerning deleting multibyte characters from the search - string while performing an incremental search. - -l. Fixed a bug with tilde expanding directory names in filename completion. - -m. Fixed a bug that did not allow binding sequences beginning with a `\'. - -n. Fixed a redisplay bug involving incorrect line wrapping when the prompt - contains a multibyte character in the last screen column. - -o. Fixed a bug that caused history expansion to disregard characters that are - documented to delimit a history event specifier without requiring `:'. - -p. Fixed a bug that could cause reading past the end of a string when reading - the value when binding the set of isearch terminators. - -q. Fixed a bug that caused readline commands that depend on knowing which - key invoked them to misbehave when dispatching key sequences that are - prefixes of other key bindings. - -r. Paren matching now works in vi insert mode. - -s. Colored completion prefixes are now displayed using a different color, less - likely to collide with files. - -t. Fixed a bug that caused vi-mode character search to misbehave when - running in callback mode. - -u. Fixed a bug that caused output to be delayed when input is coming from a - macro in vi-mode. - -v. Fixed a bug that caused the vi-mode `.' command to misbehave when redoing - a multi-key key sequence via a macro. - -w. Fixed a bug that caused problems with applications that supply their own - input function when performing completion. - -x. When read returns -1/EIO when attempting to read a key, return an error - instead of line termination back to the caller. - -y. Updated tty auditing feature based on patch from Red Hat. - -z. Fixed a bug that could cause the history library to crash on overflows - introduced by malicious editing of timestamps in the history file. - -aa. The history file writing functions only attempt to create and use a backup - history file if the history file exists and is a regular file. - -bb. Fixed an out-of-bounds read in readline's internal tilde expansion interface. - -cc. Fixed several redisplay bugs with prompt strings containing multibyte - and non-visible characters whose physical length is longer than the screen - width. - -dd. Fixed a redisplay bug with prompt strings containing invisible characters - whose physical length exceeds the screen width and using incremental search. - -ee. Readline prints more descriptive error messages when it encounters errors - while reading an inputrc file. - -ff. Fixed a bug in the character insertion code that attempts to optimize - typeahead when it reads a character that is not bound to self-insert and - resets the key sequence state. - -gg. When refreshing the line as the result of a key sequence, Readline attempts - to redraw only the last line of a multiline prompt. - -hh. Fixed an issue that caused completion of git commands to display - incorrectly when using colored-completion-prefix. - -ii. Fixed several redisplay bugs having to do with multibyte characters and - invisible characters in prompt strings. - -jj. Fixed a bug that caused mode strings to be displayed incorrectly if the - prompt was shorter than the mode string. - -2. New Features in Readline - -a. The history truncation code now uses the same error recovery mechansim as - the history writing code, and restores the old version of the history file - on error. The error recovery mechanism handles symlinked history files. - -b. There is a new bindable variable, `enable-bracketed-paste', which enables - support for a terminal's bracketed paste mode. - -c. The editing mode indicators can now be strings and are user-settable - (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string' - variables). Mode strings can contain invisible character sequences. - Setting mode strings to null strings restores the defaults. - -d. Prompt expansion adds the mode string to the last line of a multi-line - prompt (one with embedded newlines). - -e. There is a new bindable variable, `colored-completion-prefix', which, if - set, causes the common prefix of a set of possible completions to be - displayed in color. - -f. There is a new bindable command `vi-yank-pop', a vi-mode version of emacs- - mode yank-pop. - -g. The redisplay code underwent several efficiency improvements for multibyte - locales. - -h. The insert-char function attempts to batch-insert all pending typeahead - that maps to self-insert, as long as it is coming from the terminal. - -i. rl_callback_sigcleanup: a new application function that can clean up and - unset any state set by readline's callback mode. Intended to be used - after a signal. - -j. If an incremental search string has its last character removed with DEL, the - resulting empty search string no longer matches the previous line. - -k. If readline reads a history file that begins with `#' (or the value of - the history comment character) and has enabled history timestamps, the history - entries are assumed to be delimited by timestamps. This allows multi-line - history entries. - -l. Readline now throws an error if it parses a key binding without a terminating - `:' or whitespace. - -m. The default binding for ^W in vi mode now uses word boundaries specified - by Posix (vi-unix-word-rubout is bindable command name). - -n. rl_clear_visible_line: new application-callable function; clears all - screen lines occupied by the current visible readline line. - -o. rl_tty_set_echoing: application-callable function that controls whether - or not readline thinks it is echoing terminal output. - -p. Handle >| and strings of digits preceding and following redirection - specifications as single tokens when tokenizing the line for history - expansion. - -q. Fixed a bug with displaying completions when the prefix display length - is greater than the length of the completions to be displayed. - -r. The :p history modifier now applies to the entire line, so any expansion - specifying :p causes the line to be printed instead of expanded. - -s. New application-callable function: rl_pending_signal(): returns the signal - number of any signal readline has caught but not yet handled. - -t. New application-settable variable: rl_persistent_signal_handlers: if set - to a non-zero value, readline will enable the readline-6.2 signal handler - behavior in callback mode: handlers are installed when - rl_callback_handler_install is called and removed removed when a complete - line has been read. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-6.3, and the -previous version, readline-6.2. - -1. Changes to Readline - -a. Fixed a bug that did not allow the `dd', `cc', or `yy' vi editing mode - commands to work on the entire line. - -b. Fixed a bug that caused redisplay problems with prompts longer than 128 - characters and history searches. - -c. Fixed a bug that caused readline to try and run code to modify its idea - of the screen size in a signal handler context upon receiving a SIGWINCH. - -d. Fixed a bug that caused the `meta' key to be enabled beyond the duration - of an individual call top readline(). - -e. Added a workaround for a wcwidth bug in Mac OS X that caused readline's - redisplay to mishandle zero-width combining characters. - -f. Fixed a bug that caused readline to `forget' part of a key sequence when - a multiple-key sequence caused it to break out of an incremental search. - -g. Fixed bugs that caused readline to execute code in a signal handler - context if interrupted while reading from the file system during completion. - -h. Fixed a bug that caused readline to `forget' part of a key sequence when - reading an unbound multi-character key sequence. - -i. Fixed a bug that caused Readline's signal handlers to be installed beyond - the bounds of a single call to readline(). - -j. Fixed a bug that caused the `.' command to not redo the most recent `R' - command in vi mode. - -k. Fixed a bug that caused ignoring case in completion matches to result in - readline using the wrong match. - -l. Paren matching now works in vi insert mode. - -m. Fix menu-completion to make show-all-if-ambiguous and menu-complete-display-prefix - work together. - -n. Fixed a bug that didn't allow the `cc', `dd', or `yy' commands to be redone - in vi editing mode. - -o. Fixed a bug that caused the filename comparison code to not compare - multibyte characters correctly when using case-sensitive or case-mapping - comparisons. - -p. Fixed the input reading loop to call the input hook function only when there - is no terminal input available. - -q. Fixed a bug that caused binding a macro to a multi-character key sequence - where the sequence and macro value share a common prefix to not perform - the macro replacement. - -r. Fixed several redisplay errors with multibyte characters and prompts - containing invisible characters when using horizontal scrolling. - -s. Fixed a bug that caused redisplay errors when trying to overwrite - existing characters using multibyte characters. - -t. Fixed a bug in vi mode that caused the arrow keys to set the saved last - vi-mode command to the wrong value. - -u. Fixed a bug that caused double-quoted strings to be scanned incorrectly - when being used as the value of a readline variable assignment. - -v. Fixed a bug with vi mode that prevented `.' from repeating a command - entered on a previous line (command). - -w. Fixed a bug that could cause completion to core dump if it was interrupted - by a signal. - -x. Fixed a bug that could cause readline to crash and seg fault attempting to - expand an empty history entry. - -y. Fixed a bug that caused display problems with multi-line prompts containing - invisible characters on multiple lines. - -z. Fixed a bug that caused effects made by undoing changes to a history line to - be discarded. - -2. New Features in Readline - -a. Readline is now more responsive to SIGHUP and other fatal signals when - reading input from the terminal or performing word completion but no - longer attempts to run any not-allowable functions from a signal handler - context. - -b. There are new bindable commands to search the history for the string of - characters between the beginning of the line and the point - (history-substring-search-forward, history-substring-search-backward) - -c. Readline allows quoted strings as the values of variables when setting - them with `set'. As a side effect, trailing spaces and tabs are ignored - when setting a string variable's value. - -d. The history library creates a backup of the history file when writing it - and restores the backup on a write error. - -e. New application-settable variable: rl_filename_stat_hook: a function called - with a filename before using it in a call to stat(2). Bash uses it to - expand shell variables so things like $HOME/Downloads have a slash - appended. - -f. New bindable function `print-last-kbd-macro', prints the most-recently- - defined keyboard macro in a reusable format. - -g. New user-settable variable `colored-stats', enables use of colored text - to denote file types when displaying possible completions (colored analog - of visible-stats). - -h. New user-settable variable `keyseq-timout', acts as an inter-character - timeout when reading input or incremental search strings. - -i. New application-callable function: rl_clear_history. Clears the history list - and frees all readline-associated private data. - -j. New user-settable variable, show-mode-in-prompt, adds a characters to the - beginning of the prompt indicating the current editing mode. - -k. New application-settable variable: rl_input_available_hook; function to be - called when readline needs to check whether there is data available on its - input source. The default hook checks rl_instream. - -l. Readline calls an application-set event hook (rl_signal_event_hook) after - it gets a signal while reading input (read returns -1/EINTR but readline - does not handle the signal immediately) to allow the application to handle - or otherwise note it. Not currently called for SIGHUP or SIGTERM. - -m. If the user-settable variable `history-size' is set to a value less than - 0, the history list size is unlimited. - -n. When creating shared libraries on Mac OS X, the pathname written into the - library (install_name) no longer includes the minor version number. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-6.2, -and the previous version, readline-6.1. - -1. Changes to Readline - -a. Fixed a bug that caused the unconverted filename to be added to the list of - completions when the application specified filename conversion functions. - -b. Fixed a bug that caused the wrong filename to be passed to opendir when the - application has specified a filename dequoting function. - -c. Fixed a bug when repeating a character search in vi mode in the case where - there was no search to repeat. - -d. When show-all-if-ambiguous is set, the completion routines no longer insert - a common match prefix that is shorter than the text being completed. - -e. The full set of vi editing commands may now be used in callback mode. - -f. Fixed a bug that caused readline to not update its idea of the terminal - dimensions while running in `no-echo' mode. - -h. Fixed a bug that caused readline to dump core if an application called - rl_prep_terminal without setting rl_instream. - -i. Fixed a bug that caused meta-prefixed characters bound to incremental - search forward or backward to not be recognized if they were typed - subsequently. - -j. The incremental search code treats key sequences that map to the same - functions as (default) ^G, ^W, and ^Y as equivalent to those characters. - -k. Fixed a bug in menu-complete that caused it to misbehave with large - negative argument. - -l. Fixed a bug that caused vi-mode yank-last-arg to ring the bell when invoked - at the end of the line. - -m. Fixed a bug that made an explicit argument of 0 to yank-last-arg behave - as if it were a negative argument. - -n. Fixed a bug that caused directory names in words to be completed to not - be dequoted correctly. - -2. New Features in Readline - -a. The history library does not try to write the history filename in the - current directory if $HOME is unset. This closes a potential security - problem if the application does not specify a history filename. - -b. New bindable variable `completion-display-width' to set the number of - columns used when displaying completions. - -c. New bindable variable `completion-case-map' to cause case-insensitive - completion to treat `-' and `_' as identical. - -d. There are new bindable vi-mode command names to avoid readline's case- - insensitive matching not allowing them to be bound separately. - -e. New bindable variable `menu-complete-display-prefix' causes the menu - completion code to display the common prefix of the possible completions - before cycling through the list, instead of after. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-6.1, -and the previous version, readline-6.0. - -1. Changes to Readline - -a. The SIGWINCH signal handler now avoids calling the redisplay code if - one arrives while in the middle of redisplay. - -b. Changes to the timeout code to make sure that timeout values greater - than one second are handled better. - -c. Fixed a bug in the redisplay code that was triggered by a prompt - containing invisible characters exactly the width of the screen. - -d. Fixed a bug in the redisplay code encountered when running in horizontal - scroll mode. - -e. Fixed a bug that prevented menu completion from properly completing - filenames. - -f. Fixed a redisplay bug caused by a multibyte character causing a line to - wrap. - -g. Fixed a bug that caused key sequences of two characters to not be - recognized when a longer sequence identical in the first two characters - was bound. - -h. Fixed a bug that caused history expansion to be attempted on $'...' - single-quoted strings. - -i. Fixed a bug that caused incorrect redisplay when the prompt contained - multibyte characters in an `invisible' sequence bracketed by \[ and - \]. - -j. Fixed a bug that caused history expansion to short-circuit after - encountering a multibyte character. - -k. Fixed a bug that caused applications using the callback interface to not - react to SIGINT (or other signals) until another character arrived. - -2. New Features in Readline - -a. New bindable function: menu-complete-backward. - -b. In the vi insertion keymap, C-n is now bound to menu-complete by default, - and C-p to menu-complete-backward. - -c. When in vi command mode, repeatedly hitting ESC now does nothing, even - when ESC introduces a bound key sequence. This is closer to how - historical vi behaves. - -d. New bindable function: skip-csi-sequence. Can be used as a default to - consume key sequences generated by keys like Home and End without having - to bind all keys. - -e. New application-settable function: rl_filename_rewrite_hook. Can be used - to rewite or modify filenames read from the file system before they are - compared to the word to be completed. - -f. New bindable variable: skip-completed-text, active when completing in the - middle of a word. If enabled, it means that characters in the completion - that match characters in the remainder of the word are "skipped" rather - than inserted into the line. - -g. The pre-readline-6.0 version of menu completion is available as - "old-menu-complete" for users who do not like the readline-6.0 version. - -h. New bindable variable: echo-control-characters. If enabled, and the - tty ECHOCTL bit is set, controls the echoing of characters corresponding - to keyboard-generated signals. - -i. New bindable variable: enable-meta-key. Controls whether or not readline - sends the smm/rmm sequences if the terminal indicates it has a meta key - that enables eight-bit characters. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-6.0, -and the previous version, readline-5.2. - -1. Changes to Readline - -a. Fixed a number of redisplay errors in environments supporting multibyte - characters. - -b. Fixed bugs in vi command mode that caused motion commands to inappropriately - set the mark. - -c. When using the arrow keys in vi insertion mode, readline allows movement - beyond the current end of the line (unlike command mode). - -d. Fixed bugs that caused readline to loop when the terminal has been taken - away and reads return -1/EIO. - -e. Fixed bugs in redisplay occurring when displaying prompts containing - invisible characters. - -f. Fixed a bug that caused the completion append character to not be reset to - the default after an application-specified completion function changed it. - -g. Fixed a problem that caused incorrect positioning of the cursor while in - emacs editing mode when moving forward at the end of a line while using - a locale supporting multibyte characters. - -h. Fixed an off-by-one error that caused readline to drop every 511th - character of buffered input. - -i. Fixed a bug that resulted in SIGTERM not being caught or cleaned up. - -j. Fixed redisplay bugs caused by multiline prompts with invisible characters - or no characters following the final newline. - -k. Fixed redisplay bug caused by prompts consisting solely of invisible - characters. - -l. Fixed a bug in the code that buffers characters received very quickly in - succession which caused characters to be dropped. - -m. Fixed a bug that caused readline to reference uninitialized data structures - if it received a SIGWINCH before completing initialzation. - -n. Fixed a bug that caused the vi-mode `last command' to be set incorrectly - and therefore unrepeatable. - -o. Fixed a bug that caused readline to disable echoing when it was being used - with an output file descriptor that was not a terminal. - -p. Readline now blocks SIGINT while manipulating internal data structures - during redisplay. - -q. Fixed a bug in redisplay that caused readline to segfault when pasting a - very long line (over 130,000 characters). - -r. Fixed bugs in redisplay when using prompts with no visible printing - characters. - -s. Fixed a bug that caused redisplay errors when using prompts with invisible - characters and numeric arguments to a command in a multibyte locale. - -t. Fixed a bug that caused redisplay errors when using prompts with invisible - characters spanning more than two physical screen lines. - -2. New Features in Readline - -a. A new variable, rl_sort_completion_matches; allows applications to inhibit - match list sorting (but beware: some things don't work right if - applications do this). - -b. A new variable, rl_completion_invoking_key; allows applications to discover - the key that invoked rl_complete or rl_menu_complete. - -c. The functions rl_block_sigint and rl_release_sigint are now public and - available to calling applications who want to protect critical sections - (like redisplay). - -d. The functions rl_save_state and rl_restore_state are now public and - available to calling applications; documented rest of readline's state - flag values. - -e. A new user-settable variable, `history-size', allows setting the maximum - number of entries in the history list. - -f. There is a new implementation of menu completion, with several improvements - over the old; the most notable improvement is a better `completions - browsing' mode. - -g. The menu completion code now uses the rl_menu_completion_entry_function - variable, allowing applications to provide their own menu completion - generators. - -h. There is support for replacing a prefix of a pathname with a `...' when - displaying possible completions. This is controllable by setting the - `completion-prefix-display-length' variable. Matches with a common prefix - longer than this value have the common prefix replaced with `...'. - -i. There is a new `revert-all-at-newline' variable. If enabled, readline will - undo all outstanding changes to all history lines when `accept-line' is - executed. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-5.2, -and the previous version, readline-5.1. - -1. Changes to Readline - -a. Fixed a problem that caused segmentation faults when using readline in - callback mode and typing consecutive DEL characters on an empty line. - -b. Fixed several redisplay problems with multibyte characters, all having to - do with the different code paths and variable meanings between single-byte - and multibyte character redisplay. - -c. Fixed a problem with key sequence translation when presented with the - sequence \M-\C-x. - -d. Fixed a problem that prevented the `a' command in vi mode from being - undone and redone properly. - -e. Fixed a problem that prevented empty inserts in vi mode from being undone - properly. - -f. Fixed a problem that caused readline to initialize with an incorrect idea - of whether or not the terminal can autowrap. - -g. Fixed output of key bindings (like bash `bind -p') to honor the setting of - convert-meta and use \e where appropriate. - -h. Changed the default filename completion function to call the filename - dequoting function if the directory completion hook isn't set. This means - that any directory completion hooks need to dequote the directory name, - since application-specific hooks need to know how the word was quoted, - even if no other changes are made. - -i. Fixed a bug with creating the prompt for a non-interactive search string - when there are non-printing characters in the primary prompt. - -j. Fixed a bug that caused prompts with invisible characters to be redrawn - multiple times in a multibyte locale. - -k. Fixed a bug that could cause the key sequence scanning code to return the - wrong function. - -l. Fixed a problem with the callback interface that caused it to fail when - using multi-character keyboard macros. - -m. Fixed a bug that could cause a core dump when an edited history entry was - re-executed under certain conditions. - -n. Fixed a bug that caused readline to reference freed memory when attmpting - to display a portion of the prompt. - -o. Fixed a bug with prompt redisplay in a multi-byte locale to avoid redrawing - the prompt and input line multiple times. - -p. Fixed history expansion to not be confused by here-string redirection. - -q. Readline no longer treats read errors by converting them to newlines, as - it does with EOF. This caused partial lines to be returned from readline(). - -r. Fixed a redisplay bug that occurred in multibyte-capable locales when the - prompt was one character longer than the screen width. - -2. New Features in Readline - -a. Calling applications can now set the keyboard timeout to 0, allowing - poll-like behavior. - -b. The value of SYS_INPUTRC (configurable at compilation time) is now used as - the default last-ditch startup file. - -c. The history file reading functions now allow windows-like \r\n line - terminators. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-5.1, -and the previous version, readline-5.0. - -1. Changes to Readline - -a. Fixed a bug that caused multiliine prompts to be wrapped and displayed - incorrectly. - -b. Fixed a bug that caused ^P/^N in emacs mode to fail to display the current - line correctly. - -c. Fixed a problem in computing the number of invisible characters on the first - line of a prompt whose length exceeds the screen width. - -d. Fixed vi-mode searching so that failure preserves the current line rather - than the last line in the history list. - -e. Fixed the vi-mode `~' command (change-case) to have the correct behavior at - end-of-line when manipulating multibyte characters. - -f. Fixed the vi-mode `r' command (change-char) to have the correct behavior at - end-of-line when manipulating multibyte characters. - -g. Fixed multiple bugs in the redisplay of multibyte characters: displaying - prompts longer than the screen width containing multibyte characters, - -h. Fix the calculation of the number of physical characters in the prompt - string when it contains multibyte characters. - -i. A non-zero value for the `rl_complete_suppress_append' variable now causes - no `/' to be appended to a directory name. - -j. Fixed forward-word and backward-word to work when words contained - multibyte characters. - -k. Fixed a bug in finding the delimiter of a `?' substring when performing - history expansion in a locale that supports multibyte characters. - -l. Fixed a memory leak caused by not freeing the timestamp in a history entry. - -m. Fixed a bug that caused "\M-x" style key bindings to not obey the setting - of the `convert-meta' variable. - -n. Fixed saving and restoring primary prompt when prompting for incremental - and non-incremental searches; search prompts now display multibyte - characters correctly. - -o. Fixed a bug that caused keys originally bound to self-insert but shadowed - by a multi-character key sequence to not be inserted. - -p. Fixed code so rl_prep_term_function and rl_deprep_term_function aren't - dereferenced if NULL (matching the documentation). - -q. Extensive changes to readline to add enough state so that commands - requiring additional characters (searches, multi-key sequences, numeric - arguments, commands requiring an additional specifier character like - vi-mode change-char, etc.) work without synchronously waiting for - additional input. - -r. Lots of changes so readline builds and runs on MinGW. - -s. Readline no longer tries to modify the terminal settings when running in - callback mode. - -t. The Readline display code no longer sets the location of the last invisible - character in the prompt if the \[\] sequence is empty. - -u. The `change-case' command now correctly changes the case of multibyte - characters. - -v. Changes to the shared library construction scripts to deal with Windows - DLL naming conventions for Cygwin. - -w. Fixed the redisplay code to avoid core dumps resulting from a poorly-timed - SIGWINCH. - -x. Fixed the non-incremental search code in vi mode to dispose of any current - undo list when copying a line from the history into the current editing - buffer. - -y. Fixed a bug that caused reversing the incremental search direction to - not work correctly. - -z. Fixed the vi-mode `U' command to only undo up to the first time insert mode - was entered, as Posix specifies. - -aa. Fixed a bug in the vi-mode `r' command that left the cursor in the wrong - place. - -bb. Fixed a redisplay bug caused by moving the cursor vertically to a line - with invisible characters in the prompt in a multibyte locale. - -cc. Fixed a bug that could cause the terminal special chars to be bound in the - wrong keymap in vi mode. - -2. New Features in Readline - -a. The key sequence sent by the keypad `delete' key is now automatically - bound to delete-char. - -b. A negative argument to menu-complete now cycles backward through the - completion list. - -c. A new bindable readline variable: bind-tty-special-chars. If non-zero, - readline will bind the terminal special characters to their readline - equivalents when it's called (on by default). - -d. New bindable command: vi-rubout. Saves deleted text for possible - reinsertion, as with any vi-mode `text modification' command; `X' is bound - to this in vi command mode. - -e. If the rl_completion_query_items is set to a value < 0, readline never - asks the user whether or not to view the possible completions. - -f. The `C-w' binding in incremental search now understands multibyte - characters. - -g. New application-callable auxiliary function, rl_variable_value, returns - a string corresponding to a readline variable's value. - -h. When parsing inputrc files and variable binding commands, the parser - strips trailing whitespace from values assigned to boolean variables - before checking them. - -i. A new external application-controllable variable that allows the LINES - and COLUMNS environment variables to set the window size regardless of - what the kernel returns. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-5.0, -and the previous version, readline-4.3. - -1. Changes to Readline - -a. Fixes to avoid core dumps because of null pointer references in the - multibyte character code. - -b. Fix to avoid infinite recursion caused by certain key combinations. - -c. Fixed a bug that caused the vi-mode `last command' to be set incorrectly. - -d. Readline no longer tries to read ahead more than one line of input, even - when more is available. - -e. Fixed the code that adjusts the point to not mishandle null wide - characters. - -f. Fixed a bug in the history expansion `g' modifier that caused it to skip - every other match. - -g. Fixed a bug that caused the prompt to overwrite previous output when the - output doesn't contain a newline and the locale supports multibyte - characters. This same change fixes the problem of readline redisplay - slowing down dramatically as the line gets longer in multibyte locales. - -h. History traversal with arrow keys in vi insertion mode causes the cursor - to be placed at the end of the new line, like in emacs mode. - -i. The locale initialization code does a better job of using the right - precedence and defaulting when checking the appropriate environment - variables. - -j. Fixed the history word tokenizer to handle <( and >( better when used as - part of bash. - -k. The overwrite mode code received several bug fixes to improve undo. - -l. Many speedups to the multibyte character redisplay code. - -m. The callback character reading interface should not hang waiting to read - keyboard input. - -n. Fixed a bug with redoing vi-mode `s' command. - -o. The code that initializes the terminal tracks changes made to the terminal - special characters with stty(1) (or equivalent), so that these changes - are reflected in the readline bindings. New application-callable function - to make it work: rl_tty_unset_default_bindings(). - -p. Fixed a bug that could cause garbage to be inserted in the buffer when - changing character case in vi mode when using a multibyte locale. - -q. Fixed a bug in the redisplay code that caused problems on systems - supporting multibyte characters when moving between history lines when the - new line has more glyphs but fewer bytes. - -r. Undo and redo now work better after exiting vi insertion mode. - -s. Make sure system calls are restarted after a SIGWINCH is received using - SA_RESTART. - -t. Improvements to the code that displays possible completions when using - multibyte characters. - -u. Fixed a problem when parsing nested if statements in inputrc files. - -v. The completer now takes multibyte characters into account when looking for - quoted substrings on which to perform completion. - -w. The history search functions now perform better bounds checking on the - history list. - -x. Change to history expansion functions to treat `^' as equivalent to word - one, as the documention states. - -y. Some changes to the display code to improve display and redisplay of - multibyte characters. - -z. Changes to speed up the multibyte character redisplay code. - -aa. Fixed a bug in the vi-mode `E' command that caused it to skip over the - last character of a word if invoked while point was on the word's - next-to-last character. - -bb. Fixed a bug that could cause incorrect filename quoting when - case-insensitive completion was enabled and the word being completed - contained backslashes quoting word break characters. - -cc. Fixed a bug in redisplay triggered when the prompt string contains - invisible characters. - -dd. Fixed some display (and other) bugs encountered in multibyte locales - when a non-ascii character was the last character on a line. - -ee. Fixed some display bugs caused by multibyte characters in prompt strings. - -ff. Fixed a problem with history expansion caused by non-whitespace characters - used as history word delimiters. - -gg. Fixed a problem that could cause readline to refer to freed memory when - moving between history lines while doing searches. - -hh. Improvements to the code that expands and displays prompt strings - containing multibyte characters. - -ii. Fixed a problem with vi-mode not correctly remembering the numeric argument - to the last `c'hange command for later use with `.'. - -jj. Fixed a bug in vi-mode that caused multi-digit count arguments to work - incorrectly. - -kk. Fixed a problem in vi-mode that caused the last text modification command - to not be remembered across different command lines. - -ll. Fixed problems with changing characters and changing case at the end of - the line. - -mm. Fixed a problem with readline saving the contents of the current line - before beginning a non-interactive search. - -nn. Fixed a problem with EOF detection when using rl_event_hook. - -oo. Fixed a problem with the vi mode `p' and `P' commands ignoring numeric - arguments. - -2. New Features in Readline - -a. History expansion has a new `a' modifier equivalent to the `g' modifier - for compatibility with the BSD csh. - -b. History expansion has a new `G' modifier equivalent to the BSD csh `g' - modifier, which performs a substitution once per word. - -c. All non-incremental search operations may now undo the operation of - replacing the current line with the history line. - -d. The text inserted by an `a' command in vi mode can be reinserted with - `.'. - -e. New bindable variable, `show-all-if-unmodified'. If set, the readline - completer will list possible completions immediately if there is more - than one completion and partial completion cannot be performed. - -f. There is a new application-callable `free_history_entry()' function. - -g. History list entries now contain timestamp information; the history file - functions know how to read and write timestamp information associated - with each entry. - -h. Four new key binding functions have been added: - - rl_bind_key_if_unbound() - rl_bind_key_if_unbound_in_map() - rl_bind_keyseq_if_unbound() - rl_bind_keyseq_if_unbound_in_map() - -i. New application variable, rl_completion_quote_character, set to any - quote character readline finds before it calls the application completion - function. - -j. New application variable, rl_completion_suppress_quote, settable by an - application completion function. If set to non-zero, readline does not - attempt to append a closing quote to a completed word. - -k. New application variable, rl_completion_found_quote, set to a non-zero - value if readline determines that the word to be completed is quoted. - Set before readline calls any application completion function. - -l. New function hook, rl_completion_word_break_hook, called when readline - needs to break a line into words when completion is attempted. Allows - the word break characters to vary based on position in the line. - -m. New bindable command: unix-filename-rubout. Does the same thing as - unix-word-rubout, but adds `/' to the set of word delimiters. - -n. When listing completions, directories have a `/' appended if the - `mark-directories' option has been enabled. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-4.3, -and the previous version, readline-4.2a. - -1. Changes to Readline - -a. Fixed output of comment-begin character when listing variable values. - -b. Added some default key bindings for common escape sequences produced by - HOME and END keys. - -c. Fixed the mark handling code to be more emacs-compatible. - -d. A bug was fixed in the code that prints possible completions to keep it - from printing empty strings in certain circumstances. - -e. Change the key sequence printing code to print ESC as M\- if ESC is a - meta-prefix character -- it's easier for users to understand than \e. - -f. Fixed unstifle_history() to return values that match the documentation. - -g. Fixed the event loop (rl_event_hook) to handle the case where the input - file descriptor is invalidated. - -h. Fixed the prompt display code to work better when the application has a - custom redisplay function. - -i. Changes to make reading and writing the history file a little faster, and - to cope with huge history files without calling abort(3) from xmalloc. - -j. The vi-mode `S' and `s' commands are now undone correctly. - -k. Fixed a problem which caused the display to be messed up when the last - line of a multi-line prompt (possibly containing invisible characters) - was longer than the screen width. - -2. New Features in Readline - -a. Support for key `subsequences': allows, e.g., ESC and ESC-a to both - be bound to readline functions. Now the arrow keys may be used in vi - insert mode. - -b. When listing completions, and the number of lines displayed is more than - the screen length, readline uses an internal pager to display the results. - This is controlled by the `page-completions' variable (default on). - -c. New code to handle editing and displaying multibyte characters. - -d. The behavior introduced in bash-2.05a of deciding whether or not to - append a slash to a completed name that is a symlink to a directory has - been made optional, controlled by the `mark-symlinked-directories' - variable (default is the 2.05a behavior). - -e. The `insert-comment' command now acts as a toggle if given a numeric - argument: if the first characters on the line don't specify a - comment, insert one; if they do, delete the comment text - -f. New application-settable completion variable: - rl_completion_mark_symlink_dirs, allows an application's completion - function to temporarily override the user's preference for appending - slashes to names which are symlinks to directories. - -g. New function available to application completion functions: - rl_completion_mode, to tell how the completion function was invoked - and decide which argument to supply to rl_complete_internal (to list - completions, etc.). - -h. Readline now has an overwrite mode, toggled by the `overwrite-mode' - bindable command, which could be bound to `Insert'. - -i. New application-settable completion variable: - rl_completion_suppress_append, inhibits appending of - rl_completion_append_character to completed words. - -j. New key bindings when reading an incremental search string: ^W yanks - the currently-matched word out of the current line into the search - string; ^Y yanks the rest of the current line into the search string, - DEL or ^H deletes characters from the search string. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-4.2a, -and the previous version, readline-4.2. - -1. Changes to Readline - -a. More `const' and type casting fixes. - -b. Changed rl_message() to use vsnprintf(3) (if available) to fix buffer - overflow problems. - -c. The completion code no longer appends a `/' or ` ' to a match when - completing a symbolic link that resolves to a directory name, unless - the match does not add anything to the word being completed. This - means that a tab will complete the word up to the full name, but not - add anything, and a subsequent tab will add a slash. - -d. Fixed a trivial typo that made the vi-mode `dT' command not work. - -e. Fixed the tty code so that ^S and ^Q can be inserted with rl_quoted_insert. - -f. Fixed the tty code so that ^V works more than once. - -g. Changed the use of __P((...)) for function prototypes to PARAMS((...)) - because the use of __P in typedefs conflicted g++ and glibc. - -h. The completion code now attempts to do a better job of preserving the - case of the word the user typed if ignoring case in completions. - -i. Readline defaults to not echoing the input and lets the terminal - initialization code enable echoing if there is a controlling terminal. - -j. The key binding code now processes only two hex digits after a `\x' - escape sequence, and the documentation was changed to note that the - octal and hex escape sequences result in an eight-bit value rather - than strict ASCII. - -k. Fixed a few places where negative array subscripts could have occurred. - -l. Fixed the vi-mode code to use a better method to determine the bounds of - the array used to hold the marks, and to avoid out-of-bounds references. - -m. Fixed the defines in chardefs.h to work better when chars are signed. - -n. Fixed configure.in to use the new names for bash autoconf macros. - -o. Readline no longer attempts to define its own versions of some ctype - macros if they are implemented as functions in libc but not as macros in - . - -p. Fixed a problem where rl_backward could possibly set point to before - the beginning of the line. - -q. Fixed Makefile to not put -I/usr/include into CFLAGS, since it can cause - include file problems. - -2. New Features in Readline - -a. Added extern declaration for rl_get_termcap to readline.h, making it a - public function (it was always there, just not in readline.h). - -b. New #defines in readline.h: RL_READLINE_VERSION, currently 0x0402, - RL_VERSION_MAJOR, currently 4, and RL_VERSION_MINOR, currently 2. - -c. New readline variable: rl_readline_version, mirrors RL_READLINE_VERSION. - -d. New bindable boolean readline variable: match-hidden-files. Controls - completion of files beginning with a `.' (on Unix). Enabled by default. - -e. The history expansion code now allows any character to terminate a - `:first-' modifier, like csh. - -f. The incremental search code remembers the last search string and uses - it if ^R^R is typed without a search string. - -h. New bindable variable `history-preserve-point'. If set, the history - code attempts to place the user at the same location on each history - line retrived with previous-history or next-history. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-4.2, -and the previous version, readline-4.1. - -1. Changes to Readline - -a. When setting the terminal attributes on systems using `struct termio', - readline waits for output to drain before changing the attributes. - -b. A fix was made to the history word tokenization code to avoid attempts to - dereference a null pointer. - -c. Readline now defaults rl_terminal_name to $TERM if the calling application - has left it unset, and tries to initialize with the resultant value. - -d. Instead of calling (*rl_getc_function)() directly to get input in certain - places, readline now calls rl_read_key() consistently. - -e. Fixed a bug in the completion code that allowed a backslash to quote a - single quote inside a single-quoted string. - -f. rl_prompt is no longer assigned directly from the argument to readline(), - but uses memory allocated by readline. This allows constant strings to - be passed to readline without problems arising when the prompt processing - code wants to modify the string. - -g. Fixed a bug that caused non-interactive history searches to return the - wrong line when performing multiple searches backward for the same string. - -h. Many variables, function arguments, and function return values are now - declared `const' where appropriate, to improve behavior when linking with - C++ code. - -i. The control character detection code now works better on systems where - `char' is unsigned by default. - -j. The vi-mode numeric argument is now capped at 999999, just like emacs mode. - -k. The Function, CPFunction, CPPFunction, and VFunction typedefs have been - replaced with a set of specific prototyped typedefs, though they are - still in the readline header files for backwards compatibility. - -m. Nearly all of the (undocumented) internal global variables in the library - now have an _rl_ prefix -- there were a number that did not, like - screenheight, screenwidth, alphabetic, etc. - -n. The ding() convenience function has been renamed to rl_ding(), though the - old function is still defined for backwards compatibility. - -o. The completion convenience functions filename_completion_function, - username_completion_function, and completion_matches now have an rl_ - prefix, though the old names are still defined for backwards compatibility. - -p. The functions shared by readline and bash (linkage is satisfied from bash - when compiling with bash, and internally otherwise) now have an sh_ prefix. - -q. Changed the shared library creation procedure on Linux and BSD/OS 4.x so - that the `soname' contains only the major version number rather than the - major and minor numbers. - -r. Fixed a redisplay bug that occurred when the prompt spanned more than one - physical line and contained invisible characters. - -s. Added a missing `includedir' variable to the Makefile. - -t. When installing the shared libraries, make sure symbolic links are relative. - -u. Added configure test so that it can set `${MAKE}' appropriately. - -v. Fixed a bug in rl_forward that could cause the point to be set to before - the beginning of the line in vi mode. - -w. Fixed a bug in the callback read-char interface to make it work when a - readline function pushes some input onto the input stream with - rl_execute_next (like the incremental search functions). - -x. Fixed a file descriptor leak in the history file manipulation code that - was tripped when attempting to truncate a non-regular file (like - /dev/null). - -y. Changes to make all of the exported readline functions declared in - readline.h have an rl_ prefix (rltty_set_default_bindings is now - rl_tty_set_default_bindings, crlf is now rl_crlf, etc.) - -z. The formatted documentation included in the base readline distribution - is no longer removed on a `make distclean'. - -aa. Some changes were made to avoid gcc warnings with -Wall. - -bb. rl_get_keymap_by_name now finds keymaps case-insensitively, so - `set keymap EMACS' works. - -cc. The history file writing and truncation functions now return a useful - status on error. - -dd. Fixed a bug that could cause applications to dereference a NULL pointer - if a NULL second argument was passed to history_expand(). - -ee. If a hook function assigned to rl_event_hook sets rl_done to a non-zero - value, rl_read_key() now immediately returns '\n' (which is assumed to - be bound to accept-line). - -2. New Features in Readline - -a. The blink timeout for paren matching is now settable by applications, - via the rl_set_paren_blink_timeout() function. - -b. _rl_executing_macro has been renamed to rl_executing_macro, which means - it's now part of the public interface. - -c. Readline has a new variable, rl_readline_state, which is a bitmap that - encapsulates the current state of the library; intended for use by - callbacks and hook functions. - -d. rlfe has a new -l option to log input and output (-a appends to logfile), - a new -n option to set the readline application name, and -v and -h - options for version and help information. - -e. rlfe can now perform filename completion for the inferior process if the - OS has a /proc//cwd that can be read with readlink(2) to get the - inferior's current working directory. - -f. A new file, rltypedefs.h, contains the new typedefs for function pointers - and is installed by `make install'. - -g. New application-callable function rl_set_prompt(const char *prompt): - expands its prompt string argument and sets rl_prompt to the result. - -h. New application-callable function rl_set_screen_size(int rows, int cols): - public method for applications to set readline's idea of the screen - dimensions. - -i. The history example program (examples/histexamp.c) is now built as one - of the examples. - -j. The documentation has been updated to cover nearly all of the public - functions and variables declared in readline.h. - -k. New function, rl_get_screen_size (int *rows, int *columns), returns - readline's idea of the screen dimensions. - -l. The timeout in rl_gather_tyi (readline keyboard input polling function) - is now settable via a function (rl_set_keyboard_input_timeout()). - -m. Renamed the max_input_history variable to history_max_entries; the old - variable is maintained for backwards compatibility. - -n. The list of characters that separate words for the history tokenizer is - now settable with a variable: history_word_delimiters. The default - value is as before. - -o. There is a new history.3 manual page documenting the history library. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-4.1, -and the previous version, readline-4.0. - -1. Changes to Readline - -a. Changed the HTML documents so that the table-of-contents is no longer - a separate file. - -b. Changes to the shared object configuration for: Irix 5.x, Irix 6.x, - OSF/1. - -c. The shared library major and minor versions are now constructed - automatically by configure and substituted into the makefiles. - -d. It's now possible to install the shared libraries separately from the - static libraries. - -e. The history library tries to truncate the history file only if it is a - regular file. - -f. A bug that caused _rl_dispatch to address negative array indices on - systems with signed chars was fixed. - -g. rl-yank-nth-arg now leaves the history position the same as when it was - called. - -h. Changes to the completion code to handle MS-DOS drive-letter:pathname - filenames. - -i. Completion is now case-insensitive by default on MS-DOS. - -j. Fixes to the history file manipulation code for MS-DOS. - -k. Readline attempts to bind the arrow keys to appropriate defaults on MS-DOS. - -l. Some fixes were made to the redisplay code for better operation on MS-DOS. - -m. The quoted-insert code will now insert tty special chars like ^C. - -n. A bug was fixed that caused the display code to reference memory before - the start of the prompt string. - -o. More support for __EMX__ (OS/2). - -p. A bug was fixed in readline's signal handling that could cause infinite - recursion in signal handlers. - -q. A bug was fixed that caused the point to be less than zero when rl_forward - was given a very large numeric argument. - -r. The vi-mode code now gets characters via the application-settable value - of rl_getc_function rather than calling rl_getc directly. - -s. The history file code now uses O_BINARY mode when reading and writing - the history file on cygwin32. - -t. Fixed a bug in the redisplay code for lines with more than 256 line - breaks. - -u. A bug was fixed which caused invisible character markers to not be - stripped from the prompt string if the terminal was in no-echo mode. - -v. Readline no longer tries to get the variables it needs for redisplay - from the termcap entry if the calling application has specified its - own redisplay function. Readline treats the terminal as `dumb' in - this case. - -w. Fixes to the SIGWINCH code so that a multiple-line prompt with escape - sequences is redrawn correctly. - -x. Changes to the install and install-shared targets so that the libraries - and header files are installed separately. - -2. New Features in Readline - -a. A new Readline `user manual' is in doc/rluserman.texinfo. - -b. Parentheses matching is now always compiled into readline, and enabled - or disabled when the value of the `blink-matching-paren' variable is - changed. - -c. MS-DOS systems now use ~/_inputrc as the last-ditch inputrc filename. - -d. MS-DOS systems now use ~/_history as the default history file. - -e. history-search-{forward,backward} now leave the point at the end of the - line when the string to search for is empty, like - {reverse,forward}-search-history. - -f. history-search-{forward,backward} now leave the last history line found - in the readline buffer if the second or subsequent search fails. - -g. New function for use by applications: rl_on_new_line_with_prompt, used - when an application displays the prompt itself before calling readline(). - -h. New variable for use by applications: rl_already_prompted. An application - that displays the prompt itself before calling readline() must set this to - a non-zero value. - -i. A new variable, rl_gnu_readline_p, always 1. The intent is that an - application can verify whether or not it is linked with the `real' - readline library or some substitute. - -j. Per Bothner's `rlfe' (pronounced `Ralphie') readline front-end program - is included in the examples subdirectory, though it is not built - by default. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-4.0, -and the previous version, readline-2.2. - -1. Changes to Readline - -a. The version number is now 4.0, to match the major and minor version - numbers on the shared readline and history libraries. Future - releases will maintain the identical numbering. - -b. Fixed a typo in the `make install' recipe that copied libreadline.a - to libhistory.old right after installing it. - -c. The readline and history info files are now installed out of the source - directory if they are not found in the build directory. - -d. The library no longer exports a function named `savestring' -- backwards - compatibility be damned. - -e. There is no longer any #ifdef SHELL code in the source files. - -f. Some changes were made to the key binding code to fix memory leaks and - better support Win32 systems. - -g. Fixed a silly typo in the paren matching code -- it's microseconds, not - milliseconds. - -h. The readline library should be compilable by C++ compilers. - -i. The readline.h public header file now includes function prototypes for - all readline functions, and some changes were made to fix errors in the - source files uncovered by the use of prototypes. - -j. The maximum numeric argument is now clamped at 1000000. - -k. Fixes to rl_yank_last_arg to make it behave better. - -l. Fixed a bug in the display code that caused core dumps if the prompt - string length exceeded 1024 characters. - -m. The menu completion code was fixed to properly insert a single completion - if there is only one match. - -n. A bug was fixed that caused the display code to improperly display tabs - after newlines. - -o. A fix was made to the completion code in which a typo caused the wrong - value to be passed to the function that computed the longest common - prefix of the list of matches. - -p. The completion code now checks the value of rl_filename_completion_desired, - which is set by application-supplied completion functions to indicate - that filename completion is being performed, to decide whether or not to - call an application-supplied `ignore completions' function. - -q. Code was added to the history library to catch history substitutions - using `&' without a previous history substitution or search having been - performed. - - -2. New Features in Readline - -a. There is a new script, support/shobj-conf, to do system-specific shared - object and library configuration. It generates variables for configure - to substitute into makefiles. The README file provides a detailed - explanation of the shared library creation process. - -b. Shared libraries and objects are now built in the `shlib' subdirectory. - There is a shlib/Makefile.in to control the build process. `make shared' - from the top-level directory is still the right way to build shared - versions of the libraries. - -c. rlconf.h is now installed, so applications can find out which features - have been compiled into the installed readline and history libraries. - -d. rlstdc.h is now an installed header file. - -e. Many changes to the signal handling: - o Readline now catches SIGQUIT and cleans up the tty before returning; - o A new variable, rl_catch_signals, is available to application writers - to indicate to readline whether or not it should install its own - signal handlers for SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP, - SIGTTIN, and SIGTTOU; - o A new variable, rl_catch_sigwinch, is available to application - writers to indicate to readline whether or not it should install its - own signal handler for SIGWINCH, which will chain to the calling - applications's SIGWINCH handler, if one is installed; - o There is a new function, rl_free_line_state, for application signal - handlers to call to free up the state associated with the current - line after receiving a signal; - o There is a new function, rl_cleanup_after_signal, to clean up the - display and terminal state after receiving a signal; - o There is a new function, rl_reset_after_signal, to reinitialize the - terminal and display state after an application signal handler - returns and readline continues - -f. There is a new function, rl_resize_terminal, to reset readline's idea of - the screen size after a SIGWINCH. - -g. New public functions: rl_save_prompt and rl_restore_prompt. These were - previously private functions with a `_' prefix. These functions are - used when an application wants to write a message to the `message area' - with rl_message and have the prompt restored correctly when the message - is erased. - -h. New function hook: rl_pre_input_hook, called just before readline starts - reading input, after initialization. - -i. New function hook: rl_display_matches_hook, called when readline would - display the list of completion matches. The new function - rl_display_match_list is what readline uses internally, and is available - for use by application functions called via this hook. - -j. New bindable function, delete-char-or-list, like tcsh. - -k. A new variable, rl_erase_empty_line, which, if set by an application using - readline, will cause readline to erase, prompt and all, lines on which the - only thing typed was a newline. - -l. There is a new script, support/shlib-install, to install and uninstall - the shared readline and history libraries. - -m. A new bindable variable, `isearch-terminators', which is a string - containing the set of characters that should terminate an incremental - search without being executed as a command. - -n. A new bindable function, forward-backward-delete-char. - -------------------------------------------------------------------------------- -This document details the changes between this version, readline-2.2, -and the previous version, readline-2.1. - -1. Changes to Readline - -a. Added a missing `extern' to a declaration in readline.h that kept - readline from compiling cleanly on some systems. - -b. The history file is now opened with mode 0600 when it is written for - better security. - -c. Changes were made to the SIGWINCH handling code so that prompt redisplay - is done better. - -d. ^G now interrupts incremental searches correctly. - -e. A bug that caused a core dump when the set of characters to be quoted - when completing words was empty was fixed. - -f. Fixed a problem in the readline test program rltest.c that caused a core - dump. - -g. The code that handles parser directives in inputrc files now displays - more error messages. - -h. The history expansion code was fixed so that the appearance of the - history comment character at the beginning of a word inhibits history - expansion for that word and the rest of the input line. - -i. The code that prints completion listings now behaves better if one or - more of the filenames contains non-printable characters. - -j. The time delay when showing matching parentheses is now 0.5 seconds. - - -2. New Features in Readline - -a. There is now an option for `iterative' yank-last-arg handline, so a user - can keep entering `M-.', yanking the last argument of successive history - lines. - -b. New variable, `print-completions-horizontally', which causes completion - matches to be displayed across the screen (like `ls -x') rather than up - and down the screen (like `ls'). - -c. New variable, `completion-ignore-case', which causes filename completion - and matching to be performed case-insensitively. - -d. There is a new bindable command, `magic-space', which causes history - expansion to be performed on the current readline buffer and a space to - be inserted into the result. - -e. There is a new bindable command, `menu-complete', which enables tcsh-like - menu completion (successive executions of menu-complete insert a single - completion match, cycling through the list of possible completions). - -f. There is a new bindable command, `paste-from-clipboard', for use on Win32 - systems, to insert the text from the Win32 clipboard into the editing - buffer. - -g. The key sequence translation code now understands printf-style backslash - escape sequences, including \NNN octal escapes. These escape sequences - may be used in key sequence definitions or macro values. - -h. An `$include' inputrc file parser directive has been added. diff --git a/readline/COPYING b/readline/COPYING deleted file mode 100644 index 94a9ed024d..0000000000 --- a/readline/COPYING +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - Copyright (C) - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff --git a/readline/ChangeLog b/readline/ChangeLog new file mode 100644 index 0000000000..936dc3133a --- /dev/null +++ b/readline/ChangeLog @@ -0,0 +1,6 @@ +2019-10-23 Tom Tromey + + Move old contents to readline/ subdirectory. + * aclocal.m4, configure, configure.ac, .gitignore, Makefile.am, + Makefile.in, README: New files. + diff --git a/readline/ChangeLog.gdb b/readline/ChangeLog.gdb deleted file mode 100644 index f44f2469b7..0000000000 --- a/readline/ChangeLog.gdb +++ /dev/null @@ -1,1550 +0,0 @@ -2019-09-23 Andrew Burgess - - PR cli/24980 - * display.c (init_line_structures): Initialise line_state using - original minsize value. - -2019-08-13 Christian Biesinger - - * colors.c (_rl_print_color_indicator): Remove unnecessary - S_ISLNK check to fix compilation on MinGW. - -2019-08-12 Tom Tromey - - * Imported readline 8.0. - -2019-08-12 Tom Tromey - - * Makefile.in (xfree.o): Don't depend on readline.h. - * xfree.c (xfree): Remove gdb workaround. - * xmalloc.h (xfree): Remove #define. - -2018-08-12 Tom Tromey - - * emacs_keymap.c: Remove gdb workaround. - -2018-08-12 Tom Tromey - - * complete.c (get_y_or_n): Remove gdb workaround. - -2018-08-12 Tom Tromey - - * Imported readline 7.0 patch 5. - -2019-07-12 Tom de Vries - Chet Ramey - - PR cli/24514 - * readline/display.c (init_line_structures, rl_redisplay): Ensure - line_size is at least _rl_screenwidth + 1. - -2019-01-31 Alan Hayward - - * config.h.in: Add SOURCE/EXTENSION macros. - * histfile.c (history_truncate_file): Check return of write. - * util.c (_rl_tropen): Ensure pid is long. - -2017-05-19 Eli Zaretskii - - * input.c [_WIN32]: Include to avoid compiler warning on - MinGW. - -2016-09-17 Eli Zaretskii - - * util.c: Include rlshell.h. - (_rl_tropen) [_WIN32 && !__CYGWIN__]: Open the trace file in the - user's temporary directory. - - * tcap.h [HAVE_NCURSES_TERMCAP_H]: Include ncurses/termcap.h. - - * input.c (w32_isatty) [_WIN32 && !__CYGWIN__]: New function, to - replace isatty that is not reliable enough on MS-Windows. - (isatty) [_WIN32 && !__CYGWIN__]: Redirect to w32_isatty. - (rl_getc): Call _getch, not getch, which could be an ncurses - function when linked with ncurses, in which case getch will return - EOF for any keystroke, because there's no curses window. - - * tilde.c (tilde_expand_word) [_WIN32]: - * histfile.c (history_filename) [_WIN32]: Windows-specific - environment variable to replace HOME if that is undefined. - - * funmap.c (default_funmap): Compile rl_paste_from_clipboard on - all Windows platforms, not just Cygwin. - - * readline.h (rl_paste_from_clipboard): Include declaration for - all Windows platforms. - - * display.c (insert_some_chars, delete_chars): Don't use the - MinGW-specific code if linked with ncurses. - - * configure.in: - * config.h.in: Support ncurses/termcap.h. The configure script - was updated accordingly. - - * complete.c [_WIN32 && !__CYGWIN__]: Initialize - _rl_completion_case_fold to 1. - (printable_part, rl_filename_completion_function) - [_WIN32 && !__CYGWIN__]: Handle the drive letter. - -2014-12-30 Eli Zaretskii - - * complete.c (stat_char) [_WIN32]: Don't use 'access' and X_OK on - Windows, they don't work. Instead, look at the file-name - extension to determine whether the file is executable. - -2014-09-22 Chen Gang - - Pushed by Joel Brobecker - * search.c (_rl_nsearch_init): Remove useless parameter '0' for - rl_message(). - -2013-09-24 Pierre Muller - - * readline.c (bind_arrow_keys_internal): - Handle VK_HOME, VK_END, VK_DELETE and VK_INSERT for mingw - hosts. - -2013-09-23 Martin Benda - - Checked in by Joel Brobecker - * util.c (_rl_strnicmp): Add missing semicolon. - -2013-05-22 Yao Qi - - * configure.in: Invoke AC_CANONICAL_BUILD. - Change $host_os to $build_os. - * configure: Regenerated. - -2012-10-18 Joel Brobecker - - * terminal.c: Remove duplicate includes of windows.h and - wincon.h. - (_rl_get_screen_size): Remove redundant code for MinGW getting - the console size from the Windows API. - -2012-02-24 Pierre Muller - - * signals.c (_rl_block_sigwinch, _rl_release_sigwinch): Add - conditional SIGWINCH around functions. - -2011-05-11 Sterling Augustine - - * complete.c (rl_completion_matches): Undo inadvertant checkin. - -2011-06-29 Jan Kratochvil - - Avoid free from a signal handler. - * Makefile.in (xfree.o): Add readline.h. - * xfree.c: Include stdio.h and readline.h. - (xfree): Return on RL_STATE_SIGHANDLER. - * xmalloc.h (xfree): New definition. - -2011-05-11 Jan Kratochvil - - Workaround gdb.base/completion.exp regression on readline-6.2. - * complete.c (get_y_or_n): Disable the return on RL_STATE_CALLBACK. - -2011-05-11 Jan Kratochvil - - Imported readline 6.2, and upstream patch 001. - * configure: Regenerate. - -2011-03-04 Michael Snyder - - * bind.c (rl_function_dumper): Free allocated memory. - -2009-08-22 Ralf Wildenhues - - * configure: Regenerate. - - * configure.in: m4_include toplevel config/override.m4. - * configure: Regenerate. - -2009-07-30 Ralf Wildenhues - - * Makefile.in (datarootdir): New variable. - * doc/Makefile.in (datarootdir): New variable. - * shlib/Makefile.in (datarootdir): New variable. - -2009-04-17 Carlos O'Donell - - * Makefile.in: Add html target. Add dummy install-html and - install-pdf targets. - -2008-08-10 Pedro Alves - - Build fixes for DJGPP. - - * signals.c (rl_set_sighandler): Guard access to SIGWINCH. - * wcwidth.c [__GO32__]: Include wctype.h before wchar.h. - -2008-03-24 Jan Kratochvil - - PR gdb/544 - * rltty.c (block_sigint, release_sigint): Rename to... - (_rl_block_sigint, _rl_release_sigint): ...these and make them global. - * rltty.h (_rl_block_sigint, _rl_release_sigint): New prototypes. - * display.c (rl_redisplay): Wrap the function by the calls to - _RL_BLOCK_SIGINT and _RL_RELEASE_SIGINT. - -2007-09-01 Daniel Jacobowitz - - PR gdb/2138 - From readline 5.2: - * configure.in (CROSS_COMPILE): Initialize to empty. - * configure: Regenerated. - -2007-03-27 Brooks Moses - - * Makefile.in: Add dummy "pdf" target. - -2006-11-13 Denis Pilat - - * terminal.c (_rl_get_screen_size): use wr and wc variable to store - window size. - -2006-10-21 Ulrich Weigand - - * callback.c: Include "xmalloc.h". - * Makefile.in: Add dependency. - -2006-04-24 Daniel Jacobowitz - - Imported readline 5.1, and upstream patches 001-004. - -2006-03-21 Denis Pilat - - * histfile.c (read_history_range): Remove '\r' character from - history lines. - -2005-02-10 Denis Pilat - - * readline/terminal.c (_rl_get_screen_size): Get console size from - the Windows API when compiling with MinGW. - -2005-07-25 Mark Mitchell - - * input.c (rl_getc): Use getch to read console input on - Windows. - * readline.c (bind_arrow_keys_internal): Translate - Windows keysequences into ANSI key sequences. - * rldefs.h (NO_TTY_DRIVER): Define on MinGW. - * rltty.c: Conditionalize on NO_TTY_DRIVER throughout. - -2005-07-03 Mark Kettenis - - From Martin Simmons: - * configure.in: Check for getpwnam instead of getpwname. - * configure: Regenerate. - -2005-05-09 Mark Mitchell - - * aclocal.m4: Use AC_TRY_LINK to check for mbstate_t. - * complete.c (pwd.h): Guard with HAVE_PWD_H. - (getpwent): Guard with HAVE_GETPWENT. - (rl_username_completion_function): Guard use of getpwent. - (endpwent): Likewise. - * config.h.in (HAVE_FCNTL): New macro. - (HAVE_GETPWENT): Likewise. - (HAVE_GETPWNAM): Likewise. - (HAVE_GETPWUID): Likewise. - (HAVE_KILL): Likewise. - (HAVE_PWD_H): Likewise. - * configure: Regenerated. - * configure.in: Handle MinGW when cross compiling. Check for - getpwnam, getpwent, getpwuid, kill, and pwd.h. - * display.c (rl_clear_screen): Treat Windows like DOS. - (insert_some_chars): Likewise. - (delete_chars): Likewise. - * shell.c (pwd.h): Guard with HAVE_PWD_H. - (getpwuid): Guard with HAVE_GETPWUID. - (sh_unset_nodelay_mode): Guard use of fnctl with HAVE_FNCTL_H. - * signals.c (rl_signal_handler): Don't use SIGALRM or - SIGQUIT if not defined. Use "raise" if "kill" is not available. - (rl_set_signals): Don't set handlers for SIGQUIT or SIGALRM if - they are not defined. - (rl_clear_signals): Likewise. - * tilde.c (pwd.h): Guard with HAVE_PWD_H. - (getpwuid): Guard declaration with HAVE_GETPWUID. - (getpwnam): Guard declaration with HAVE_GETPWNAM. - (tilde_expand_word): Guard use of getpwnam with HAVE_GETPWNAM. - -2004-02-19 Andrew Cagney - - * config.guess: Update from version 2003-06-12 to 2004-02-16. - * config.sub: Update from version 2003-06-13 to 2004-02-16. - -2004-01-27 Elena Zannoni - - Merge in official patches to readline-4.3 from - ftp://ftp.cwru.edu/pub/bash/readline-4.3-patches: - NOTE: Patch-ID readline-43-004 was already applied (see below). - - * bind.c (rl_generic_bind): Pressing certain key sequences - causes an infinite loop in _rl_dispatch_subseq with the `key' argument - set to 256. This eventually causes bash to exceed the stack size - limit and crash with a segmentation violation. - Patch-ID: readline43-001. - - * readline.c (_rl_dispatch_subseq): Repeating an edit in - vi-mode with `.' does not work. - Patch-ID: readline43-002. - - * mbutil.c (_rl_get_char_len, _rl_compare_chars, - _rl_adjust_point): When in a locale with multibyte characters, the - readline display updater will occasionally cause a - segmentation fault when attempting to compute the length of the first - multibyte character on the line. - Patch-ID: readline43-003. - - * vi_mode.c (_rl_vi_change_mbchar_case): Using the vi editing - mode's case-changing commands in a locale with multibyte characters - will cause garbage characters to be inserted into the editing buffer. - Patch-ID: readline43-005. - -2003-12-28 Eli Zaretskii - - * readline.c (rl_save_state, rl_restore_state): Support systems - that don't define SIGWINCH. - -2003-12-25 Eli Zaretskii - - * terminal.c (_rl_get_screen_size) [__DJGPP__]: Compute the - screen width and height using console I/O. - (_rl_init_terminal_io) [__MSDOS__]: Zero out all the _rl_term_* - variables. Convert to _rl_* naming scheme. - (_rl_set_cursor) [__MSDOS__]: Ifdef away this function. - -2003-12-23 Eli Zaretskii - - * display.c (_rl_move_vert) [__MSDOS__]: Don't use undeclared - variable `l'. Use `delta' instead recomputing its value anew. - Assign -delta to i instead of the other way around. - -2003-12-11 Michael Chastain - - * rlmbutil.h: Require HAVE_MBSTATE_T for HANDLE_MULTIBYTE. - Revert requirement of HAVE_MBRTOWC. Delete macro definitions - that attempted to fake mbstate_t if HAVE_MBSRTOCWS is defined - and HAVE_MBSTATE_T is not defined. - -2003-06-14 H.J. Lu - - * support/config.guess: Update to 2003-06-12 version. - * support/config.sub: Update to 2003-06-13 version. - -2003-05-25 Mark Kettenis - - * aclocal.m4: Don't add wcwidth.o if we don't have wchar.h. - * configure: Regenerate. - -2003-05-13 Andreas Jaeger - - * support/config.guess: Update to 2003-05-09 version. - * support/config.sub: Update to 2003-05-09 version. - -2003-03-03 Joel Brobecker - - * aclocal.m4: Add check for mbrtowc. - * config.h.in: Regenerate. - * configure: Regenerate. - * rlmbutil.h: Disable multi-byte if mbrtowc is not defined. - -2003-03-03 Kris Warkentin - - * aclocal.m4: Cause wcwidth check to substitute - HAVE_WCWIDTH for building. - * Makefile.in: Add wcwidth object to lib if required. - * shlib/Makefile.in: Likewise. - * configure: Regenerate. - -2003-01-09 Michael Chastain - - From Chet Ramey, , the readline maintainer: - ftp://ftp.cwru.edu/pub/bash/readline-4.3-patches/readline43-004 - - * display.c: Fix perverse screen refresh with UTF-8. - When running in a locale with multibyte characters, the - readline display updater will use carriage returns when - drawing the line, overwriting any partial output already on - the screen and not terminated by a newline. - Patch-ID: readline43-004 - -2003-01-08 Chris Demetriou - - * config.guess: Update to 2003-01-03 version. - * config.sub: Update to 2003-01-03 version. - -2002-12-16 Christopher Faylor - - * configure.in: Remove --enable-shared option. It shouldn't be used - for gdb. - * configure: Regenerate. - -2002-12-16 Christopher Faylor - - * config/cygwin.cache: Prime mbstate_t. - -2002-12-06 Elena Zannoni - - Import of readline 4.3. NB: This import includes those gdb - local changes that aren't in the official readline sources. - - * compat.c, mbutil.c, misc.c, rlmbutil.h, rltypedefs.h, - text.c, doc/history.0, doc/history.3, support/wcwidth.c, - examples/readlinebuf.h, examples/rlcat.c: New files. - - * CHANGELOG, CHANGES, INSTALL, MANIFEST, Makefile.in, README, - aclocal.m4, ansi_stdlib.h, bind.c, callback.c, chardefs.h, - complete.c, config.h.in, configure, configure.in, display.c, - emacs_keymap.c, funmap.c, histexpand.c, histfile.c, histlib.h, - history.c, history.h, histsearch.c, input.c, isearch.c, - keymaps.c, keymaps.h, kill.c, macro.c, nls.c, parens.c, - posixdir.h, readline.c, readline.h, rlconf.h, rldefs.h, - rlprivate.h, rlshell.h, rlstdc.h, rltty.c, savestring.c, - search.c, shell.c, signals.c, terminal.c, tilde.c, tilde.h, - undo.c, util.c, vi_keymap.c, vi_mode.c, xmalloc.c, xmalloc.h, - doc/Makefile.in, doc/hist.texinfo, doc/hstech.texinfo, - doc/hsuser.texinfo, doc/manvers.texinfo, doc/readline.3, - doc/rlman.texinfo, doc/rltech.texinfo, doc/rluser.texinfo - doc/rluserman.texinfo, doc/texi2dvi, doc/texi2html, - shlib/Makefile.in, support/install.sh, support/mkdirs, - support/mkdist, support/shlib-install, support/shobj-conf, - examples/Inputrc, examples/Makefile.in, examples/fileman.c, - examples/histexamp.c, examples/manexamp.c, examples/rl.c, - examples/rlfe.c, examples/rltest.c, examples/rlversion.c: - Modified files. - -2002-08-23 Andrew Cagney - - * support/config.guess: Import version 2002-08-23. - * support/config.sub: Import version 2002-08-22. - -2002-07-19 Chris Demetriou - - * support/config.guess: Update from ../config.guess. - * support/config.sub: Update from ../config.sub. - -2002-02-24 Elena Zannoni - - * ChangeLog.gdb: Renamed from ChangeLog.Cygnus. - -2002-02-24 Daniel Jacobowitz - - * support/config.guess: Import from master sources, rev 1.232. - * support/config.sub: Import from master sources, rev 1.246. - -2002-02-01 Ben Elliston - - * config.guess: Import from master sources, rev 1.229. - * config.sub: Import from master sources, rev 1.240. - -2002-01-17 H.J. Lu (hjl@gnu.org) - - * support/config.guess: Import from master sources, rev 1.225. - * support/config.sub: Import from master sources, rev 1.238. - -2001-07-20 Andrew Cagney - - * support/config.guess: Update using ../config.sub. - -2001-07-16 Andrew Cagney - - * support/config.sub: Update using ../config.sub. - -2001-06-15 Elena Zannoni - - * configure.in: Add -fsigned-char to LOCAL_CFLAGS for Linux - running on the IBM S/390. - * configure: Ditto. - -2001-01-07 Michael Sokolov - - * rltty.c (save_tty_chars): Fix compilation-stopping typo. - -2000-07-10 Eli Zaretskii - - * terminal.c (_rl_get_screen_size) [__DJGPP__]: Determine screen - size via DJGPP-specific calls. - (_rl_init_terminal_io) [__MSDOS__]: DJGPP-specific terminal - initialization. - (_rl_backspace) [__MSDOS__]: Don't call tputs. - (ding) [__MSDOS__]: Use DJGPP-specific calls to support visible - bell. - - * display.c (_rl_move_vert) [__MSDOS__]: Support cursor movement - upwards with DJGPP-specific calls. - (_rl_clear_to_eol) [__MSDOS__]: Don't call tputs. - (_rl_clear_screen) [__MSDOS__]: Support clear-screen with - DJGPP-specific calls. - (insert_some_chars) [__MSDOS__]: Don't call tputs. - (delete_chars) [__MSDOS__]: Don't call tputs. - -2000-07-08 Elena Zannoni - - * readline/readline.h: Ifdef out the export of savestring(). - It should not have been in the distribution. - -2000-07-07 Elena Zannoni - - * Import of readline 4.1. - - Locally modified files: Makefile.in, configure.in, configure - (regenerated), config.h.in (regenerated), rltty.c, - shell.c signals.c. - - Locally added files: acconfig.h, config/*, config.h.bot, - cross-build/*, doc/inc-hit.texinfo. - - New files: USAGE, rlprivate.h, rlshell.h, xmalloc.h. - -2000-03-16 Eli Zaretskii - - * support/shobj-conf: Shared libs are unsupported on MSDOS. - - * bind.c (_rl_read_file): Open files in binary mode. Strip CR - characters after reading the file. - (rl_re_read_init_file, rl_read_init_file): Allow for _inputrc on - DOS. - - * complete.c (username_completion_function): Don't bypass getpw* - function calls for DJGPP. - (Filename_completion_function): Handle d:foo/bar file names. - - * display.c (_rl_move_vert) [__GO32__]: fflush the stream, to make - sure cursor position is up to date. - (_rl_clear_screen) [__GO32__]: Clear screen and home the cursor. - (insert_some_characters, delete_characters) [__DJGPP__]: Don't use - memcpy. - - * histfile.c (read_history_range, history_truncate_file) - (history_do_write) [__MSDOS__]: Allow for underscore instead of - the leading dot in file names. - - * input.c: Don't use GO32-specific workarounds if HAVE_SELECT or - HAVE_TERMIOS_H are defined. - - * readline.c: Don't disable signals if __DJGPP__ is defined. - - * rltty.c: Don't disable signals and don't bypass termios code for - DJGPP (if HAVE_TERMIOS_H is defined). - - * signals.c: Don't disable signals for DJGPP. - - * terminal.c (_rl_get_screen_size) [__DJGPP__]: Initialize screen - dimensions. - (ding) [__DJGPP__]: Support visual bell. - -1999-08-13 Elena Zannoni - - From Philippe De Muyter - * shell.c (stdio.h): File included, for definition of NULL. - * readline/rltty.c (get_tty_settings): Conditionalize - call to set_winsize on TIOGWINSZ. - -1999-07-30 Elena Zannoni - - * Imported Readline 4.0. Integrated all the Cygnus - local changes since last import. - - New files: rlstdc.h, savestring.c, shlib directory, - doc/manvers.texinfo, examples/rlversion.c, - support/install-shlib, support/shobj-conf. - - Removed files: MANIFEST.doc, doc/inc-hist.texi. - -1999-07-13 Elena Zannoni - - * acconfig.h: Fix typo: it's GWINSZ_IN_SYS_IOCTL, not - TIOCGWINSZ_IN_SYS_IOCTL. - - * config.h.in: Regenerate with autoheader. - -1999-04-27 Elena Zannoni - - * ChangeLog.Cygnus: new file. It is the old Changelog. - * ChangeLog: removed. It was conflicting with CHANGELOG - on Windows. - -1999-04-22 Jason Molenda (jsm@bugshack.cygnus.com) - - * Makefile.in (install): Make comment about this change more explicit. - -1999-04-22 Jason Molenda (jsm@bugshack.cygnus.com) - - * Makefile.in (install): Don't install the final libreadline.a - or .h files. - -Tue Mar 23 10:56:08 1999 Elena Zannoni - - Patches from Robert Hoehne : - - * display.c: Change some terminal calls to work on DJGPP. - * terminal.c: Likewise. - * Makefile.in: Remove . from the VPATH directive. - -Tue Mar 9 14:58:13 1999 Geoffrey Noer - - * support/config.sub: Recognize cygwin*, not just cygwin32. - -Tue Feb 9 10:38:57 1999 Elena Zannoni - - * configure.in: Do not use the ./support directory. - * configure: Regenerate. - -Wed Jan 6 12:24:19 1999 Christopher Faylor - - * configure.in: Use LOCAL_CFLAGS rather than CFLAGS for - searching libtermcap directory. - * configure: Regenerate. - -Thu Dec 31 12:07:01 1998 Christopher Faylor - - * configure.in: Search devo libtermcap directory for termcap.h - when compiling for cygwin. - * configure: Regenerated. - -1998-12-30 Michael Meissner - - * Makefile.in (install): Only try to copy libreadline.a and - libhistory.a if they exist. - -Tue Dec 29 23:49:20 1998 Christopher Faylor - - * cross-build/cygwin.cache: Add a couple more known settings. - * configure.in: Fix typo. - * configure: Regenerated. - -Tue Dec 29 18:11:28 1998 Elena Zannoni - - * cross-build: new directory. - - * cross-build/cygwin.cache: new file. Used for Cygwin cross builds. - - * configure.in: added tests for cross-build for Cygwin. - -1998-12-24 Jason Molenda (jsm@bugshack.cygnus.com) - - * Makefile.in: Add CYGNUS LOCAL comment. - * acconfig.h: Add missing defines. - * config.h.bot: Add missing content. - * configure, config.h.in: Regenerated. - -Wed Dec 23 16:21:41 1998 Elena Zannoni - - * Makefile.in: comment out the rule to rebuild configure by - running autoconf. - -Tue Dec 22 10:00:30 1998 Elena Zannoni - - * shell.c (savestring): ifdef'd it out. - - * Imported new version of Readline 2.2.1. Removed all the Cygnus - local changes. - - New files: acconfig.h, aclocal.m4, ansi_stdlib.h, callback.c, - config.h.in, configure, histexpand.c, histfile.c, histlib.h, - histsearch.c, input.c, kill.c, macro.c, nls.c, posixdir.h, - posixjmp.h, posixstat.h, rlconf.h, rltty.h, rlwinsize.h, shell.c, - tcap.h, terminal.c, undo.c, util.c, support directory. - - Removed files: sysdep*, config directory. - - -Fri Dec 4 15:25:41 1998 David Taylor - - The following changes were made by Jim Blandy - and David Taylor - as part of a project to merge in changes - made by HP; HP did not create ChangeLog entries. - - * config/mp-enable-tui: New file. - (TUI_CFLAGS): Search devo's include directory, as long as we're - totally ruining modularity. - (INCLUDE_SRCDIR): New var. - (GDB_TUI_SRCDIR): Fix syntax error. - - * configure.in: Check the --enable-tui flag; if it's set, include - a makefile fragment that #defines TUI and adds the needed #include - directories. - (*-*-hpux*): New host; use sysdep-hpux.h. - - * Makefile.in (.c.o): Check the variable set in the makefile - fragment above. - - * display.c (term_goto): declare it. - (insert_some_chars): set it. - (delete_chars): set it. - - * readline.c: add tui include files surrounded by TUI. - (rl_reset): new function, move some of rl_abort functionality to - here. - (rl_abort): call rl_reset. - (rl_getc): tui changes. - (init_terminal_io): tui changes. - - * readline.h (tui_version, fputc_unfiltered, fputs_unfiltered, - tui_tputs): declare if TUI is defined. - - * rltty.c (prepare_terminal_settings): additional comment. - - * signals.c: add tui include files surrounded by TUI. move #if - and #endif to column 1 so HP's compiler will accept them. Remove - declaration of tuiDoAndReturnToTop since it's declared in tui.h. - (rl_handle_sigwinch): call tuiDoAndReturnToTop if TUI defined. - (rl_handle_sigwinch_on_clear): define if TUI defined. - (rl_set_signals): if TUI, avoid infinite recursion. - (rl_clear_signals): install rl_handle_sigwinch_on_clear. - - * sysdep-hpux.h: New file. - -Mon Nov 2 15:26:33 1998 Geoffrey Noer - - * configure.in: Check cygwin* instead of cygwin32*. - -Tue Jul 28 09:43:27 1998 Jeffrey A Law (law@cygnus.com) - - * sysdep-hpux11.h: New file. - * configure.in (*-*-*-hpux11*): Use sysdep-hpux11.h. - -Thu Jul 23 17:48:21 1998 Ian Lance Taylor - - * configure.bat: Remove obsolete file. - * examples/configure.bat: Remove obsolete file. - -Wed May 13 13:41:53 1998 Ian Lance Taylor - - * sysdep-6irix.h: New file. - * configure.in (*-*-irix6*): New host; use sysdep-6irix.h. - - * Makefile.in (isearch.o, search.o): Depend upon sysdep.h. - (Makefile): Depend upon $(srcdir)/configure.in. - -Thu Apr 9 11:59:38 1998 Ian Dall ( - - * configure.in (host==netbsd): Include config/mh-bsd44. - * config/mh-bsd44: New file. - -Wed Dec 3 16:48:20 1997 Michael Snyder (msnyder@cleaver.cygnus.com) - - * rltty.c: fix typos. - -Tue Oct 8 08:59:24 1996 Stu Grossman (grossman@critters.cygnus.com) - - * tilde.c (tilde_word_expand): __MSDOS___ -> __MSDOS__ - -Sat Oct 05 11:24:34 1996 Mark Alexander - - * rldefs.h: On Linux, include to fix compile error - in . - -Wed Sep 4 18:06:51 1996 Stu Grossman (grossman@critters.cygnus.com) - - * rldefs.h: Enable HANDLE_SIGNALS for cygwin32. - -Thu Aug 29 16:59:45 1996 Michael Meissner - - * configure.in (i[345]86-*-*): Recognize i686 for pentium pro. - -Fri Aug 16 17:49:57 1996 Stu Grossman (grossman@critters.cygnus.com) - - * complete.c: Include if not DOS, and if cygwin32 or not - win32. - * configure.in: Add test for *-*-cygwin32* to use config/mh-posix. - * readline.c: Move decl of tgetstr to rldefs.h. - * (_rl_set_screen_size): Remove redundant ifdef MINIMALs. - * rldefs.h: Don't do MINIMAL for cygwin32. Cygwin32 now uses - full-blown readline, except for termcap. - -Sun Aug 11 21:06:26 1996 Stu Grossman (grossman@critters.cygnus.com) - - * rldefs.c: Get rid of define of SIGALRM if _WIN32 or __MSDOS__. - * Don't define ScreenCols/ScreenRows/... if cygwin32. - * sysdep-norm.h: Don't include if cygwin32. - -Sun Aug 11 14:59:09 1996 Fred Fish - - * rldefs.h: If __osf__is defined, include instead of - . - -Fri Aug 9 08:54:26 1996 Stu Grossman (grossman@critters.cygnus.com) - - * bind.c complete.c history.c readline.c: Don't include sys/file.h. - * complete.c display.c parens.c readline.c rldefs.h rltty.c - signals.c tilde.c: Change refs to _MSC_VER and __WIN32__ to _WIN32. - * signals.c (rl_signal_handler): Ifdef out kill if _WIN32. - * sysdep-norm.h: Ifdef out include of dirent.h if _WIN32. - Include malloc.h if _WIN32. - -Thu Jul 18 15:59:35 1996 Michael Meissner - - * rldefs.h (sys/uio.h) Before sys/stream.h is included under AIX, - include sys/uio.h, which prevents an undefined structure used in a - prototype message from being generated. - -Tue Jun 25 23:05:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) - - * Makefile.in (datadir): Set to $(prefix)/share. - (docdir): Removed. - -Sun May 26 15:14:42 1996 Fred Fish - - From: David Mosberger-Tang - - * sysdep-linux.h: New file. - * display.c: Add include of "sysdep.h" to get HAVE_VARARGS_H. - * configure.in: Change pattern i[345]86-*-linux* into *-*-linux* to - support non-x86 based Linux platforms. - -Sun Apr 7 22:06:11 1996 Fred Fish - - From: Miles Bader - * config/mh-gnu: New file. - * configure.in (*-*-gnu*): New host. - -Sun Apr 7 13:21:51 1996 Fred Fish - - From: Robert Lipe - * configure.in: SCO OpenServer 5 (a.k.a 3.2v5*) is more like - SCO 3.2v4 than 3.2v2. - -Wed Jan 3 18:22:10 1996 steve chamberlain - - * readline.c, display.c, complete.c: Add _MSC_VER to list of - things which can't do most things. - -Thu Nov 16 15:39:05 1995 Geoffrey Noer - - * complete.c: Change WIN32 to __WIN32__, added #else return NULL - to end of that define. - -Tue Oct 31 10:38:58 1995 steve chamberlain - - * display.c, parens.c, readline.c, rldefs.h: Change use of - WIN32 to __WIN32__. - -Tue Oct 10 11:07:23 1995 Fred Fish - - * Makefile.in (BISON): Remove macro. - -Tue Oct 10 08:49:00 1995 steve chamberlain - - * complete.c (filename_completion_function): Enable for - win32 when not MSC. - -Sun Oct 8 04:17:19 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * configure.in: Handle powerpc-ibm-aix* like rs6000-ibm-aix*. - -Sat Oct 7 20:36:16 1995 Michael Meissner - - * rltty.c (outchar): Return an int, like tputs expects. - * signals.c (_rl_output_character_function): Ditto. - -Fri Sep 29 15:19:23 1995 steve chamberlain - - Fixes for when the host WIN32, but not MSC. - * complete.c: Sometimes have pwd.h - * parens.c: WIN32 has similar restrictions to __GO32__. - * readline.c (__GO32__): Some of this moved into rldefs.h - * signals.c (__GO32__): Likewise. - * rldefs.h (MSDOS||WIN32) becomes MSDOS||MSC. - (WIN32&&!WIN32): New definitions. - -Wed Sep 20 12:57:17 1995 Ian Lance Taylor - - * Makefile.in (maintainer-clean): New synonym for realclean. - -Wed Mar 1 13:33:43 1995 Michael Meissner - - * rltty.c (outchar): Provide prototype for outchar, to silence - type warnings in passing outchar to tputs on systems like Linux - that have full prototypes. - - * signals.c (_rl_output_character_function): Provide prototype to - silence type warnings. - -Sun Jan 15 14:10:37 1995 Steve Chamberlain - - * rldefs.h: Define MINIMAL for __GO32__ and WIN32. - * complete.c, display.c, readline.c, rltty.c: Test MINIMAL - instead of __GO32__. - -Wed Aug 24 13:04:47 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) - - * configure.in: Change i[34]86 to i[345]86. - -Sat Jul 16 13:26:31 1994 Stan Shebs (shebs@andros.cygnus.com) - - * configure.in (m88*-harris-cxux7*): Recognize. - * sysdep-cxux7.h: New file. - -Fri Jul 8 13:18:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) - - * rttty.c (control_meta_key_on): Remove superfluous testing of - __GO32__. - -Thu Jun 30 15:21:54 1994 Steve Chamberlain (sac@jonny.cygnus.com) - - * rltty.c (control_meta_key_on): Don't compile if __GO32__ is - defined. - (rltty_set_default_bindings): Likewise. - * display.c (insert_some_chars, delete_chars): row_start should be - a short. - * parens.c (rl_insert_close): No FD_SET if using __GO32__. - * readline.c (rl_gather_tyi): Strip off spurious high bits. - -Sun Jun 12 03:51:52 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * history.c: Swap inclusion of rldefs.h and chardefs.h to avoid - CTRL macro redefinition. - -Mon May 9 18:29:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) - - * readline.c (readline_default_bindings): Don't compile if - __GO32__ is defined. - (_rl_set_screen_size): Likewise. - * rltty.c (rltty_set_default_bindings): Likewise. - (control_meta_key): Likewise. - * display.c: If __GO32__ is defined, include . - * parens.c: If __GO32__ is defined, undefine FD_SET. - * signals.c: Include SIGWINCH handling in the set of things which - is not done if HANDLE_SIGNALS is not set. - -Fri May 6 13:38:39 1994 Steve Chamberlain (sac@cygnus.com) - - * config/mh-go32: New fragment. - * configure.in (host==go32): Use go32 fragment. - -Wed May 4 14:36:53 1994 Stu Grossman (grossman@cygnus.com) - - * chardefs.h, rldefs.h: Move decls of string funcs from chardefs.h - to rldefs.h so that they don't pollute apps that include - readline.h. - * history.c: include rldefs.h to get decls of string funcs. - -Wed May 4 12:15:11 1994 Stan Shebs (shebs@andros.cygnus.com) - - * configure.in (rs6000-bull-bosx*): New configuration, RS/6000 - variant. - -Wed Apr 20 10:43:52 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in: Use mh-posix for sunos4.1*. - -Wed Apr 13 21:28:44 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * rltty.c (set_tty_settings): Don't set readline_echoing_p. - (rl_deprep_terminal) [NEW_TTY_DRIVER]: Set readline_echoing_p. - -Sun Mar 13 09:13:12 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in: Add TAGS target. - -Wed Mar 9 18:01:31 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * isearch.c, search.c: Include sysdep.h. - -Thu Mar 3 17:40:03 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * configure.in: For ISC, use mh-sysv, not mh-isc. - -Thu Feb 24 04:13:53 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) - - * Merge in changes from bash-1.13.5. Merge changes from glob/tilde.c - into tilde.c and use it. Add system function declarations where - necessary. Check for __GO32__, not _GO32_ consistently. - * Makefile.in: Update dependencies. - * rltty.c: Include to match include file setup - in readline.c for rldefs.h. Otherwise we get inconsistent - TTY_DRIVER definitions in readline.c and rltty.c. - * bind.c, complete.c: Do not include , it is already - included via sysdep.h, which causes problems if has - no multiple inclusion protection. - * readline.c (_rl_set_screen_size): Reestablish test for - TIOCGWINSZ_BROKEN. - * rldefs.h: Define S_ISREG if necessary. - -Fri Feb 18 08:56:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in: Add search.o rule for Sun make. - -Wed Feb 16 16:35:49 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * rltty.c: #if out some code if __GO32__. - -Tue Feb 15 14:07:08 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * readline.c (_rl_output_character_function), display.c: - Return int, not void, to conform with the expected arg of tputs. - * readline.c (init_terminal_io): tgetflag only takes 1 arg. - * readline.c (_rl_savestring): New function. - * chardefs.h: To avoid conflicts and/or warnings, define - savestring as a macro wrapper for _rl_savestring. - * display.c (extern term_xn): It's an int flag, not a string. - * charsdefs.h, rldefs.h: Remove HAVE_STRING_H-related junk. - -Sat Feb 5 08:32:30 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * Makefile.in: Remove obsolete rules for history.info and - readline.info. - -Thu Jan 27 17:04:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) - - * chardefs.h: Only declare strrchr if it is not #define'd. - -Tue Jan 25 11:30:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * rldefs.h: Accept __hpux as well as hpux for HP compiler in ANSI mode. - -Fri Jan 21 17:31:26 1994 Jim Kingdon (kingdon@lisa.cygnus.com) - - * chardefs.h, tilde.c: Just declare strrchr rather than trying to - include a system header. - -Fri Jan 21 14:40:43 1994 Fred Fish (fnf@cygnus.com) - - * Makefile.in (distclean, realclean): Expand local-distclean - inline after doing recursion. You can't recurse after removing - Makefile. Make them depend on local-clean. - * Makefile.in (local-distclean): Remove now superfluous target. - -Mon Jan 17 12:42:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com) - - * readline.c (doing_an_undo): Delete second declaration, since it - confuses the alpha-osf1 native compiler. - -Sun Jan 16 12:33:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) - - * complete.c, bind.c: Include . - * complete.c: Define X_OK if not defined by a system header. - - * chardefs.h: Don't declare xmalloc. - - * keymaps.h: Include "chardefs.h" not . - - * Makefile.in (clean mostlyclean distclean realclean): Recurse - into subdirectories as well as doing this directory. Add clean-dvi - target. - -Sat Jan 15 19:36:12 1994 Per Bothner (bothner@kalessin.cygnus.com) - - * readline.c, display.c: Patches to allow use of all 80 - columns on most terminals (those with am and xn). - - Merge in changes from bash-1.13. The most obvious one is - that the file readline.c has been split into multiple files. - * bind.c, complete.c, dispay.c, isearch.c, parens.c, rldefs.h, - rltty.c, search.c signals.c, tilde.c, tilde.h, xmalloc.c: New files. - -Sat Dec 11 16:29:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) - - * readline.c (rl_getc): If GO32, trim high bit from getkey, - otherwise fancy PC keys cause grief. - -Fri Nov 5 11:49:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in: Add doc to configdirs. - * Makefile.in (info dvi install-info clean-info): Recurse into doc. - -Fri Oct 22 07:55:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in: Add * to end of all OS names. - -Tue Oct 5 12:33:51 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * readline.c: Add stuff for HIUX to place where we detect termio - vs. sgtty (ugh, but I don't see a simple better way). - -Wed Sep 29 11:02:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * readline.c (parser_if): Free tname when done with it (change - imported from from bash 1.12 readline). - -Tue Sep 7 17:15:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in (m88k-*-sysvr4*): Comment out previous change. - -Fri Jul 2 11:05:34 1993 Ian Lance Taylor (ian@cygnus.com) - - * configure.in (*-*-riscos*): New entry; use mh-sysv. - -Wed Jun 23 13:00:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * configure.in: Add comment. - -Mon Jun 14 14:28:55 1993 Jim Kingdon (kingdon@eric) - - * configure.in (m88k-*-sysvr4*): Use sysdep-norm.h. - -Sun Jun 13 13:04:09 1993 Jim Kingdon (kingdon@cygnus.com) - - * Makefile.in ({real,dist}clean): Remove sysdep.h. - -Thu Jun 10 11:22:41 1993 Jim Kingdon (kingdon@cygnus.com) - - * Makefile.in: Add mostlyclean, distclean, and realclean targets. - -Fri May 21 17:09:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) - - * config/mh-isc: New file. - * configure.in: Use it. - -Sat Apr 17 00:40:12 1993 Jim Kingdon (kingdon at calvin) - - * readline.c, history.c: Don't include sys/types.h; sysdep.h does. - - * config/mh-sysv: Define TIOCGWINSZ_BROKEN. - readline.c: Check it. - -Wed Mar 24 02:06:15 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) - - * Makefile.in: add installcheck & dvi targets - -Fri Mar 12 18:36:53 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) - - * configure.in: recognize *-*-solaris2* instead of *-*-solaris* (a - number of people want to call SunOS 4.1.2 "solaris1.0" - and get it right) - -Tue Mar 2 21:25:36 1993 Fred Fish (fnf@cygnus.com) - - * sysdep-sysv4.h: New file for SVR4. - * configure.in (*-*-sysv4*): Use sysdep-sysv4.h. - - * configure.in (*-*-ultrix2): Add triplet from Michael Rendell - (michael@mercury.cs.mun.ca) - -Tue Dec 15 12:38:16 1992 Ian Lance Taylor (ian@cygnus.com) - - * configure.in (i[34]86-*-sco3.2v4*): use mh-sco4. - * config/mh-sco4: New file, like mh-sco but without defining - _POSIX_SOURCE. - -Wed Nov 11 21:20:14 1992 John Gilmore (gnu@cygnus.com) - - * configure.in: Reformat to one-case-per-line. - Handle SunOS 3.5, as per Karl Berry, . - -Wed Nov 4 15:32:31 1992 Stu Grossman (grossman at cygnus.com) - - * sysdep-norm.h: Remove some crud, install dire warning. - -Thu Oct 22 01:08:13 1992 Stu Grossman (grossman at cygnus.com) - - * configure.in: Make SCO work again... - -Mon Oct 12 15:04:07 1992 Ian Lance Taylor (ian@cygnus.com) - - * readline.c (init_terminal_io): if tgetent returns 0, the - terminal type is unknown. - -Thu Oct 1 23:44:14 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) - - * configure.in: use cpu-vendor-os triple instead of nested cases - -Wed Sep 30 12:58:57 1992 Stu Grossman (grossman at cygnus.com) - - * readline.c (rl_complete_internal): Cast alloca to (char *) to - avoid warning. - -Fri Sep 25 12:45:05 1992 Stu Grossman (grossman at cygnus.com) - - * readline.c (clear_to_eol, rl_generic_bind): Make static. - (rl_digit_loop): Add arg to call to rl_message(). - * vi_mode.c (rl_vi_first_print): Add arg to call to - rl_back_to_indent(). - -Wed Aug 19 14:59:07 1992 Ian Lance Taylor (ian@cygnus.com) - - * Makefile.in: always create installation directories, use full - file name for install target. - -Wed Aug 12 15:50:57 1992 John Gilmore (gnu@cygnus.com) - - * readline.c (last_readline_init_file): Fix typo made by Steve - Chamberlain/DJ Delorie. Proper control file name is ~/.inputrc, - not ~/inputrc. - -Thu Jun 25 16:15:27 1992 Stu Grossman (grossman at cygnus.com) - - * configure.in: Make bsd based systems use sysdep-obsd.h. - -Tue Jun 23 23:22:53 1992 Per Bothner (bothner@cygnus.com) - - * config/mh-posix: New file, for Posix-compliant systems. - * configure.in: Use mh-posix for Linux (free Unix clone). - -Tue Jun 23 21:59:20 1992 Fred Fish (fnf@cygnus.com) - - * sysdep-norm.h (alloca): Protect against previous definition as - a macro with arguments. - -Fri Jun 19 15:48:54 1992 Stu Grossman (grossman at cygnus.com) - - * sysdep-obsd.h: #include to make this more Kosher. - -Fri Jun 19 12:53:28 1992 John Gilmore (gnu at cygnus.com) - - * config/mh-apollo68v, mh-sco, mh-sysv, mh-sysv4}: RANLIB=true. - -Mon Jun 15 13:50:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) - - * configure.in: use mh-sysv4 on solaris2 - -Mon Jun 15 12:28:24 1992 Fred Fish (fnf@cygnus.com) - - * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install, - it is broken on ncr 3000's. - * config/mh-ncr3000 (RANLIB): Use RANLIB=true. - -Mon Jun 15 01:35:55 1992 John Gilmore (gnu at cygnus.com) - - * readline.c: Make new SIGNALS_* macros to parameterize the - ugly changes in signal blocking. Use them throughout, - reducing #ifdef HAVE_POSIX_SIGNALS and HAVE_BSD_SIGNALS clutter - significantly. Make all such places use POSIX if available, - to avoid losing with poor `sigsetmask' emulation from libiberty. - -Sun Jun 14 15:19:51 1992 Stu Grossman (grossman at cygnus.com) - - * readline.c (insert_some_chars): Return void. - -Thu Jun 11 01:27:45 1992 John Gilmore (gnu at cygnus.com) - - * readline.c: #undef PC, which Solaris2 defines in sys/types.h, - clobbering the termcap global variable PC. - -Tue Jun 9 17:30:23 1992 Fred Fish (fnf@cygnus.com) - - * config/{mh-ncr3000, mh-sysv4}: Change INSTALL to use - /usr/ucb/install. - -Mon Jun 8 23:10:07 1992 Fred Fish (fnf@cygnus.com) - - * readline.h (rl_completer_quote_characters): Add declaration. - * readline.c (rl_completer_quote_characters): Add global var. - * readline.c (strpbrk): Add prototype and function. - * readline.c (rl_complete_internal): Add code to handle - expansion of quoted strings. - -Mon May 11 12:39:30 1992 John Gilmore (gnu at cygnus.com) - - * readline.c: Can't initialize FILE *'s with stdin and stdout, - because they might not be constant. Patch from Tom Quinn, - trq@dinoysos.thphys.ox.ac.uk. - -Tue Apr 28 21:52:34 1992 John Gilmore (gnu at cygnus.com) - - * readline.h: Declare rl_event_hook (which already existed). - Suggested by Christoph Tietz . - -Wed Apr 22 18:08:01 1992 K. Richard Pixley (rich@rtl.cygnus.com) - - * configure.in: remove subdirs declaration. The obsolete semantic - for subdirs has been usurped by per's new meaning. - -Tue Apr 21 11:54:23 1992 K. Richard Pixley (rich@cygnus.com) - - * Makefile.in: rework CFLAGS so that they can be set on the - command line to make. Remove MINUS_G. Default CFLAGS to -g. - -Fri Apr 10 23:02:27 1992 Fred Fish (fnf@cygnus.com) - - * configure.in: Recognize new ncr3000 config. - * config/mh-ncr3000: New NCR 3000 config file. - -Wed Mar 25 10:46:30 1992 John Gilmore (gnu at cygnus.com) - - * history.c (stifle_history): Negative arg treated as zero. - -Tue Mar 24 23:46:20 1992 K. Richard Pixley (rich@cygnus.com) - - * config/mh-sysv: INSTALL_PROG -> INSTALL. - -Mon Feb 10 01:41:35 1992 Brian Fox (bfox at gnuwest.fsf.org) - - * history.c (history_do_write) Build a buffer of all of the lines - to write and write them in one fell swoop (lower overhead than - calling write () for each line). Suggested by Peter Ho. - - * vi_mode.c (rl_vi_subst) Don't forget to end the undo group. - -Sat Mar 7 00:15:36 1992 K. Richard Pixley (rich@rtl.cygnus.com) - - * Makefile.in: remove FIXME's on info and install-info targets. - -Fri Mar 6 22:02:04 1992 K. Richard Pixley (rich@cygnus.com) - - * Makefile.in: added check target. - -Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com) - - * Makefile.in, configure.in: removed traces of namesubdir, - -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced - copyrights to '92, changed some from Cygnus to FSF. - -Fri Feb 21 14:37:32 1992 Steve Chamberlain (sac at rtl.cygnus.com) - - * readline.c, examples/fileman.c: patches from DJ to support DOS - -Thu Feb 20 23:23:16 1992 Stu Grossman (grossman at cygnus.com) - - * readline.c (rl_read_init_file): Make sure that null filename is - not passed to open() or else we end up opening the directory, and - read a bunch of garbage into keymap[]. - -Mon Feb 17 17:15:09 1992 Fred Fish (fnf at cygnus.com) - - * readline.c (readline_default_bindings): Only make use of VLNEXT - when both VLNEXT and TERMIOS_TTY_DRIVER is defined. On SVR4 - includes , so VLNEXT is always defined. - - * sysdep-norm.h (_POSIX_VERSION): Define this for all SVR4 - systems so that gets used, instead of . - -Fri Dec 20 12:04:31 1991 Fred Fish (fnf at cygnus.com) - - * configure.in: Change svr4 references to sysv4. - -Tue Dec 10 04:07:20 1991 K. Richard Pixley (rich at rtl.cygnus.com) - - * Makefile.in: infodir belongs in datadir. - -Fri Dec 6 23:23:14 1991 K. Richard Pixley (rich at rtl.cygnus.com) - - * Makefile.in: remove spaces following hyphens, bsd make can't - cope. added clean-info. added standards.text support. Don't - know how to make info anymore. - - * configure.in: commontargets is no longer a recognized hook, so - remove it. new subdir called doc. - -Thu Dec 5 22:46:10 1991 K. Richard Pixley (rich at rtl.cygnus.com) - - * Makefile.in: idestdir and ddestdir go away. Added copyrights - and shift gpl to v2. Added ChangeLog if it didn't exist. docdir - and mandir now keyed off datadir by default. - -Fri Nov 22 09:02:32 1991 John Gilmore (gnu at cygnus.com) - - * sysdep-obsd.h: Rename from sysdep-newsos.h. - * configure.in: Use sysdep-obsd for Mach as well as NEWs. - - * sysdep-norm.h, sysdep-aix.h: Add , which POSIX - requires to make work. Improve Sun alloca decl. - -Thu Nov 21 18:48:08 1991 John Gilmore (gnu at cygnus.com) - - * Makefile.in: Clean up ../glob/tilde.c -> tilde.o path. - Clean up makefile a bit in general. - -Thu Nov 21 14:40:29 1991 Stu Grossman (grossman at cygnus.com) - - * configure.in, config/mh-svr4: Make SVR4 work. - - * readline.c: Move config stuff to sysdep.h, use typedef dirent - consistently, remove refs to d_namlen (& D_NAMLEN) to improve - portability. Also, update copyright notice. - readline.h: remove config stuff that I added erroneously in the - first place. - - * emacs_keymap.c, funmap.c, history.c, keymaps.c, vi_keymap.c, - vi_mode.c: move config stuff to sysdep.h, update copyright notices. - -Tue Nov 19 15:02:13 1991 Stu Grossman (grossman at cygnus.com) - - * history.c: #include "sysdep.h". - -Tue Nov 19 10:49:17 1991 Fred Fish (fnf at cygnus.com) - - * Makefile.in, config/hm-sysv, config/hm-sco: Change SYSV to - USG to match current usage. - - * readline.c: Add USGr4 to list of defined things to check for - to use style directory access. - - * config/hm-svr4: New file for System V Release 4 (USGr4). - -Mon Nov 18 23:59:52 1991 Stu Grossman (grossman at cygnus.com) - - * readline.c (filename_completion_function): use struct dirent - instead of struct direct. - -Fri Nov 1 07:02:13 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c (rl_translate_keyseq) Make C-? translate to RUBOUT - unconditionally. - -Mon Oct 28 11:34:52 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c; Use Posix directory routines and macros. - - * funmap.c; Add entry for call-last-kbd-macro. - - * readline.c (rl_prep_term); Use system EOF character on POSIX - systems also. - -Thu Oct 3 16:19:53 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c; Make a distinction between having a TERMIOS tty - driver, and having POSIX signal handling. You might one without - the other. New defines used HAVE_POSIX_SIGNALS, and - TERMIOS_TTY_DRIVER. - -Tue Jul 30 22:37:26 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: rl_getc () If a call to read () returns without an - error, but with zero characters, the file is empty, so return EOF. - -Thu Jul 11 20:58:38 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: (rl_get_next_history, rl_get_previous_history) - Reallocate the buffer space if the line being moved to is longer - the the current space allocated. Amazing that no one has found - this bug until now. - -Sun Jul 7 02:37:05 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c:(rl_parse_and_bind) Allow leading whitespace. - Make sure TERMIO and TERMIOS systems treat CR and NL - disctinctly. - -Tue Jun 25 04:09:27 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: Rework parsing conditionals to pay attention to the - prior states of the conditional stack. This makes $if statements - work correctly. - -Mon Jun 24 20:45:59 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: support for displaying key binding information - includes the functions rl_list_funmap_names (), - invoking_keyseqs_in_map (), rl_invoking_keyseqs (), - rl_dump_functions (), and rl_function_dumper (). - - funmap.c: support for same includes rl_funmap_names (). - - readline.c, funmap.c: no longer define STATIC_MALLOC. However, - update both version of xrealloc () to handle a null pointer. - -Thu Apr 25 12:03:49 1991 Brian Fox (bfox at gnuwest.fsf.org) - - * vi_mode.c (rl_vi_fword, fWord, etc. All functions use - the macro `isident()'. Fixed movement bug which prevents - continious movement through the text. - -Fri Jul 27 16:47:01 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c (parser_if) Allow "$if term=foo" construct. - -Wed May 23 16:10:33 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c (rl_dispatch) Correctly remember the last command - executed. Fixed typo in username_completion_function (). - -Mon Apr 9 19:55:48 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: username_completion_function (); For text passed in - with a leading `~', remember that this could be a filename (after - it is completed). - -Thu Apr 5 13:44:24 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: rl_search_history (): Correctly handle case of an - unfound search string, but a graceful exit (as with ESC). - - * readline.c: rl_restart_output (); The Apollo passes the address - of the file descriptor to TIOCSTART, not the descriptor itself. - -Tue Mar 20 05:38:55 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * readline.c: rl_complete (); second call in a row causes possible - completions to be listed. - - * readline.c: rl_redisplay (), added prompt_this_line variable - which is the first character character following \n in prompt. - -Sun Mar 11 04:32:03 1990 Brian Fox (bfox at gnuwest.fsf.org) - - * Signals are now supposedly handled inside of SYSV compilation. - -Wed Jan 17 19:24:09 1990 Brian Fox (bfox at sbphy.ucsb.edu) - - * history.c: history_expand (); fixed overwriting memory error, - added needed argument to call to get_history_event (). - -Thu Jan 11 10:54:04 1990 Brian Fox (bfox at sbphy.ucsb.edu) - - * readline.c: added mark_modified_lines to control the - display of an asterisk on modified history lines. Also - added a user variable called mark-modified-lines to the - `set' command. - -Thu Jan 4 10:38:05 1990 Brian Fox (bfox at sbphy.ucsb.edu) - - * readline.c: start_insert (). Only use IC if we don't have an im - capability. - -Fri Sep 8 09:00:45 1989 Brian Fox (bfox at aurel) - - * readline.c: rl_prep_terminal (). Only turn on 8th bit - as meta-bit iff the terminal is not using parity. - -Sun Sep 3 08:57:40 1989 Brian Fox (bfox at aurel) - - * readline.c: start_insert (). Uses multiple - insertion call in cases where that makes sense. - - rl_insert (). Read type-ahead buffer for additional - keys that are bound to rl_insert, and insert them - all at once. Make insertion of single keys given - with an argument much more efficient. - -Tue Aug 8 18:13:57 1989 Brian Fox (bfox at aurel) - - * readline.c: Changed handling of EOF. readline () returns - (char *)EOF or consed string. The EOF character is read from the - tty, or if the tty doesn't have one, defaults to C-d. - - * readline.c: Added support for event driven programs. - rl_event_hook is the address of a function you want called - while Readline is waiting for input. - - * readline.c: Cleanup time. Functions without type declarations - do not use return with a value. - - * history.c: history_expand () has new variable which is the - characters to ignore immediately following history_expansion_char. - -Sun Jul 16 08:14:00 1989 Brian Fox (bfox at aurel) - - * rl_prep_terminal () - BSD version turns off C-s, C-q, C-y, C-v. - - * readline.c -- rl_prep_terminal () - SYSV version hacks readline_echoing_p. - BSD version turns on passing of the 8th bit for the duration - of reading the line. - -Tue Jul 11 06:25:01 1989 Brian Fox (bfox at aurel) - - * readline.c: new variable rl_tilde_expander. - If non-null, this contains the address of a function to call if - the standard meaning for expanding a tilde fails. The function is - called with the text sans tilde (as in "foo"), and returns a - malloc()'ed string which is the expansion, or a NULL pointer if - there is no expansion. - - * readline.h - new file chardefs.h - Separates things that only readline.c needs from the standard - header file publishing interesting things about readline. - - * readline.c: - readline_default_bindings () now looks at terminal chararacters - and binds those as well. - -Wed Jun 28 20:20:51 1989 Brian Fox (bfox at aurel) - - * Made readline and history into independent libraries. - diff --git a/readline/INSTALL b/readline/INSTALL deleted file mode 100644 index afb4d53e8e..0000000000 --- a/readline/INSTALL +++ /dev/null @@ -1,287 +0,0 @@ -Basic Installation -================== - -These are installation instructions for Readline-8.0. - -The simplest way to compile readline is: - - 1. `cd' to the directory containing the readline source code and type - `./configure' to configure readline for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes some time. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile readline and build the static readline - and history libraries. If supported, the shared readline and history - libraries will be built also. See below for instructions on compiling - the other parts of the distribution. Typing `make everything' will - cause the static and shared libraries (if supported) and the example - programs to be built. - - 3. Type `make install' to install the static readline and history - libraries, the readline include files, the documentation, and, if - supported, the shared readline and history libraries. - - 4. You can remove the created libraries and object files from the - build directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile readline for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the readline developers, and should be used with care. - -The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It -uses those values to create a `Makefile' in the build directory, -and Makefiles in the `doc', `shlib', and `examples' -subdirectories. It also creates a `config.h' file containing -system-dependent definitions. Finally, it creates a shell script -`config.status' that you can run in the future to recreate the -current configuration, a file `config.cache' that saves the -results of its tests to speed up reconfiguring, and a file -`config.log' containing compiler output (useful mainly for -debugging `configure'). - -If you need to do unusual things to compile readline, please try -to figure out how `configure' could check whether to do them, and -mail diffs or instructions to so they can -be considered for the next release. If at some point -`config.cache' contains results you don't want to keep, you may -remove or edit it. - -The file `configure.in' is used to create `configure' by a -program called `autoconf'. You only need `configure.in' if you -want to change it or regenerate `configure' using a newer version -of `autoconf'. The readline `configure.in' requires autoconf -version 2.50 or newer. - -Compilers and Options -===================== - -Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure - -Or on systems that have the `env' program, you can do it like this: - - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure - -Compiling For Multiple Architectures -==================================== - -You can compile readline for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - -If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile readline for one architecture at a -time in the source code directory. After you have installed -readline for one architecture, use `make distclean' before -reconfiguring for another architecture. - -Installation Names -================== - -By default, `make install' will install the readline libraries in -`/usr/local/lib', the include files in -`/usr/local/include/readline', the man pages in `/usr/local/man', -and the info files in `/usr/local/info'. You can specify an -installation prefix other than `/usr/local' by giving `configure' -the option `--prefix=PATH' or by supplying a value for the -DESTDIR variable when running `make install'. - -You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. -If you give `configure' the option `--exec-prefix=PATH', the -readline Makefiles will use PATH as the prefix for installing the -libraries. Documentation and other data files will still use the -regular prefix. - -Specifying the System Type -========================== - -There may be some features `configure' can not figure out -automatically, but need to determine by the type of host readline -will run on. Usually `configure' can figure that out, but if it -prints a message saying it can not guess the host type, give it -the `--host=TYPE' option. TYPE can either be a short name for -the system type, such as `sun4', or a canonical name with three -fields: CPU-COMPANY-SYSTEM (e.g., i386-unknown-freebsd4.2). - -See the file `config.sub' for the possible values of each field. - -Sharing Defaults -================ - -If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: the readline `configure' looks for a site script, but not -all `configure' scripts do. - -Operation Controls -================== - -`configure' recognizes the following options to control how it -operates. - -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - -`--help' - Print a summary of the options to `configure', and exit. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`configure' also accepts some other, not widely useful, options. - -Optional Features -================= - -The readline `configure' recognizes a single `--with-PACKAGE' option: - -`--with-curses' - This tells readline that it can find the termcap library functions - (tgetent, et al.) in the curses library, rather than a separate - termcap library. Readline uses the termcap functions, but does not - link with the termcap or curses library itself, allowing applications - which link with readline the to choose an appropriate library. - This option tells readline to link the example programs with the - curses library rather than libtermcap. - -`configure' also recognizes two `--enable-FEATURE' options: - -`--enable-shared' - Build the shared libraries by default on supported platforms. The - default is `yes'. - -`--enable-static' - Build the static libraries by default. The default is `yes'. - -Shared Libraries -================ - -There is support for building shared versions of the readline and -history libraries. The configure script creates a Makefile in -the `shlib' subdirectory, and typing `make shared' will cause -shared versions of the readline and history libraries to be built -on supported platforms. - -If `configure' is given the `--enable-shared' option, it will attempt -to build the shared libraries by default on supported platforms. - -Configure calls the script support/shobj-conf to test whether or -not shared library creation is supported and to generate the values -of variables that are substituted into shlib/Makefile. If you -try to build shared libraries on an unsupported platform, `make' -will display a message asking you to update support/shobj-conf for -your platform. - -If you need to update support/shobj-conf, you will need to create -a `stanza' for your operating system and compiler. The script uses -the value of host_os and ${CC} as determined by configure. For -instance, FreeBSD 4.2 with any version of gcc is identified as -`freebsd4.2-gcc*'. - -In the stanza for your operating system-compiler pair, you will need to -define several variables. They are: - -SHOBJ_CC The C compiler used to compile source files into shareable - object files. This is normally set to the value of ${CC} - by configure, and should not need to be changed. - -SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create - position-independent code. If you are using gcc, this - should probably be set to `-fpic'. - -SHOBJ_LD The link editor to be used to create the shared library from - the object files created by $SHOBJ_CC. If you are using - gcc, a value of `gcc' will probably work. - -SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. - If you are using gcc, `-shared' may be all that is necessary. - These should be the flags needed for generic shared object - creation. - -SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library - creation. Many systems use the -R option to the link - editor to embed a path within the library for run-time - library searches. A reasonable value for such systems would - be `-R$(libdir)'. - -SHLIB_LIBS Any additional libraries that shared libraries should be - linked against when they are created. - -SHLIB_LIBPREF The prefix to use when generating the filename of the shared - library. The default is `lib'; Cygwin uses `cyg'. - -SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when - generating the filename of the shared library. Many systems - use `so'; HP-UX uses `sl'. - -SHLIB_LIBVERSION The string to append to the filename to indicate the version - of the shared library. It should begin with $(SHLIB_LIBSUFF), - and possibly include version information that allows the - run-time loader to load the version of the shared library - appropriate for a particular program. Systems using shared - libraries similar to SunOS 4.x use major and minor library - version numbers; for those systems a value of - `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. - Systems based on System V Release 4 don't use minor version - numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. - Other Unix versions use different schemes. - -SHLIB_DLLVERSION The version number for shared libraries that determines API - compatibility between readline versions and the underlying - system. Used only on Cygwin. Defaults to $SHLIB_MAJOR, but - can be overridden at configuration time by defining DLLVERSION - in the environment. - -SHLIB_DOT The character used to separate the name of the shared library - from the suffix and version information. The default is `.'; - systems like Cygwin which don't separate version information - from the library name should set this to the empty string. - -SHLIB_STATUS Set this to `supported' when you have defined the other - necessary variables. Make uses this to determine whether - or not shared library creation should be attempted. If - shared libraries are not supported, this will be set to - `unsupported'. - -You should look at the existing stanzas in support/shobj-conf for ideas. - -Once you have updated support/shobj-conf, re-run configure and type -`make shared' or `make'. The shared libraries will be created in the -shlib subdirectory. - -If shared libraries are created, `make install' will install them. -You may install only the shared libraries by running `make -install-shared' from the top-level build directory. Running `make -install' in the shlib subdirectory will also work. If you don't want -to install any created shared libraries, run `make install-static'. diff --git a/readline/MANIFEST b/readline/MANIFEST deleted file mode 100644 index ad49d6686b..0000000000 --- a/readline/MANIFEST +++ /dev/null @@ -1,165 +0,0 @@ -# -# Master distribution manifest for the standalone readline distribution -# -doc d -examples d -examples/autoconf d -examples/rlfe d -support d -shlib d -COPYING f -README f -MANIFEST f -INSTALL f -CHANGELOG f -CHANGES f -NEWS f -USAGE f -aclocal.m4 f -config.h.in f -configure f -configure.ac f -Makefile.in f -readline.pc.in f -ansi_stdlib.h f -chardefs.h f -colors.h f -history.h f -histlib.h f -keymaps.h f -parse-colors.h f -posixdir.h f -posixjmp.h f -posixselect.h f -posixstat.h f -readline.h f -rlconf.h f -rldefs.h f -rlmbutil.h f -rlprivate.h f -rlshell.h f -rlstdc.h f -rltty.h f -rltypedefs.h f -rlwinsize.h f -tcap.h f -tilde.h f -xmalloc.h f -bind.c f -callback.c f -colors.c f -compat.c f -complete.c f -display.c f -emacs_keymap.c f -funmap.c f -input.c f -isearch.c f -keymaps.c f -kill.c f -macro.c f -mbutil.c f -misc.c f -nls.c f -parens.c f -parse-colors.c f -readline.c f -rltty.c f -savestring.c f -search.c f -shell.c f -signals.c f -terminal.c f -text.c f -tilde.c f -undo.c f -util.c f -vi_keymap.c f -vi_mode.c f -xfree.c f -xmalloc.c f -history.c f -histexpand.c f -histfile.c f -histsearch.c f -patchlevel f -shlib/Makefile.in f -support/config.guess f -support/config.rpath f -support/config.sub f -support/install.sh f -support/mkdirs f -support/mkdist f -support/mkinstalldirs f -support/shobj-conf f -support/shlib-install f -support/wcwidth.c f -doc/Makefile.in f -doc/texinfo.tex f -doc/version.texi f -doc/fdl.texi f -doc/rlman.texi f -doc/rltech.texi f -doc/rluser.texi f -doc/rluserman.texi f -doc/history.texi f -doc/hstech.texi f -doc/hsuser.texi f -doc/readline.3 f -doc/history.3 f -doc/texi2dvi f -doc/texi2html f -examples/Makefile.in f -examples/excallback.c f -examples/fileman.c f -examples/manexamp.c f -examples/readlinebuf.h f -examples/rl-fgets.c f -examples/rlbasic.c f -examples/rlcat.c f -examples/rlevent.c f -examples/rlkeymaps.c f -examples/rltest.c f -examples/rl-callbacktest.c f -examples/rl.c f -examples/rlptytest.c f -examples/rlversion.c f -examples/histexamp.c f -examples/hist_erasedups.c f -examples/hist_purgecmd.c f -examples/Inputrc f -examples/autoconf/BASH_CHECK_LIB_TERMCAP f -examples/autoconf/RL_LIB_READLINE_VERSION f -examples/autoconf/wi_LIB_READLINE f -examples/rlfe/ChangeLog f -examples/rlfe/Makefile.in f -examples/rlfe/README f -examples/rlfe/config.h.in f -examples/rlfe/configure f -examples/rlfe/configure.in f -examples/rlfe/extern.h f -examples/rlfe/os.h f -examples/rlfe/pty.c f -examples/rlfe/rlfe.c f -examples/rlfe/screen.h f -examples/rlwrap-0.30.tar.gz f -# formatted documentation, from MANIFEST.doc -doc/readline.ps f -doc/history.ps f -doc/rluserman.ps f -doc/readline.dvi f -doc/history.dvi f -doc/rluserman.dvi f -doc/readline.info f -doc/history.info f -doc/rluserman.info f -doc/readline.html f -doc/history.html f -doc/rluserman.html f -doc/readline.0 f -doc/history.0 f -doc/readline_3.ps f -doc/history_3.ps f -doc/history.pdf f -doc/readline.pdf f -doc/rluserman.pdf f diff --git a/readline/Makefile.am b/readline/Makefile.am new file mode 100644 index 0000000000..50b10b244c --- /dev/null +++ b/readline/Makefile.am @@ -0,0 +1,20 @@ +# Copyright (C) 2019 Free Software Foundation, Inc. + +# This file is part of GDB. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +AUTOMAKE_OPTIONS = no-dist foreign +SUBDIRS = readline +ACLOCAL_AMFLAGS = -I . -I ../config diff --git a/readline/Makefile.in b/readline/Makefile.in index bcbd18b662..1c68a53bdb 100644 --- a/readline/Makefile.in +++ b/readline/Makefile.in @@ -1,616 +1,517 @@ -## -*- text -*- ## -# Master Makefile for the GNU readline library. -# Copyright (C) 1994-2018 Free Software Foundation, Inc. +# Makefile.in generated by automake 1.15.1 from Makefile.am. +# @configure_input@ -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. +# Copyright (C) 1994-2017 Free Software Foundation, Inc. -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -RL_LIBRARY_VERSION = @LIBVERSION@ -RL_LIBRARY_NAME = readline - -PACKAGE = @PACKAGE_NAME@ -VERSION = @PACKAGE_VERSION@ +@SET_MAKE@ +# Copyright (C) 2019 Free Software Foundation, Inc. + +# This file is part of GDB. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/../config/lead-dot.m4 \ + $(top_srcdir)/../config/override.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +DIST_SUBDIRS = $(SUBDIRS) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_VERSION = @PACKAGE_VERSION@ - PACKAGE_TARNAME = @PACKAGE_TARNAME@ - +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ -VPATH = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -BUILD_DIR = @BUILD_DIR@ +AUTOMAKE_OPTIONS = no-dist foreign +SUBDIRS = readline +ACLOCAL_AMFLAGS = -I . -I ../config +all: all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files +check-am: all-am +check: check-recursive +all-am: Makefile +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive -CC = @CC@ -RANLIB = @RANLIB@ -AR = @AR@ -ARFLAGS = @ARFLAGS@ -RM = rm -f -CP = cp -MV = mv +dvi-am: -@SET_MAKE@ -SHELL = @MAKE_SHELL@ +html: html-recursive -prefix = @prefix@ -exec_prefix = @exec_prefix@ +html-am: -datarootdir = @datarootdir@ +info: info-recursive -bindir = @bindir@ -libdir = @libdir@ -mandir = @mandir@ -includedir = @includedir@ -datadir = @datadir@ -localedir = @localedir@ -pkgconfigdir = ${libdir}/pkgconfig +info-am: -infodir = @infodir@ +install-data-am: -docdir = @docdir@ +install-dvi: install-dvi-recursive -man3dir = $(mandir)/man3 +install-dvi-am: -# Support an alternate destination root directory for package building -DESTDIR = +install-exec-am: -# Programs to make tags files. -ETAGS = etags -CTAGS = ctags -tw - -CFLAGS = @CFLAGS@ -LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' -CPPFLAGS = @CPPFLAGS@ - -DEFS = @DEFS@ @CROSS_COMPILE@ -LOCAL_DEFS = @LOCAL_DEFS@ - -TERMCAP_LIB = @TERMCAP_LIB@ - -# For libraries which include headers from other libraries. -INCLUDES = -I. -I$(srcdir) - -XCCFLAGS = $(ASAN_CFLAGS) $(DEFS) $(LOCAL_DEFS) $(INCLUDES) $(CPPFLAGS) -CCFLAGS = $(XCCFLAGS) $(LOCAL_CFLAGS) $(CFLAGS) - -# could add -Werror here -GCC_LINT_FLAGS = -ansi -Wall -Wshadow -Wpointer-arith -Wcast-qual \ - -Wwrite-strings -Wstrict-prototypes \ - -Wmissing-prototypes -Wno-implicit -pedantic -GCC_LINT_CFLAGS = $(XCCFLAGS) $(GCC_LINT_FLAGS) @CFLAGS@ @LOCAL_CFLAGS@ - -ASAN_XCFLAGS = -fsanitize=address -fno-omit-frame-pointer -ASAN_XLDFLAGS = -fsanitize=address - -install_examples = @EXAMPLES_INSTALL_TARGET@ - -.c.o: - ${RM} $@ - $(CC) -c $(CCFLAGS) $< - -# The name of the main library target. -LIBRARY_NAME = libreadline.a -STATIC_LIBS = libreadline.a libhistory.a - -# The C code source files for this library. -CSOURCES = $(srcdir)/readline.c $(srcdir)/funmap.c $(srcdir)/keymaps.c \ - $(srcdir)/vi_mode.c $(srcdir)/parens.c $(srcdir)/rltty.c \ - $(srcdir)/complete.c $(srcdir)/bind.c $(srcdir)/isearch.c \ - $(srcdir)/display.c $(srcdir)/signals.c $(srcdir)/emacs_keymap.c \ - $(srcdir)/vi_keymap.c $(srcdir)/util.c $(srcdir)/kill.c \ - $(srcdir)/undo.c $(srcdir)/macro.c $(srcdir)/input.c \ - $(srcdir)/callback.c $(srcdir)/terminal.c $(srcdir)/xmalloc.c $(srcdir)/xfree.c \ - $(srcdir)/history.c $(srcdir)/histsearch.c $(srcdir)/histexpand.c \ - $(srcdir)/histfile.c $(srcdir)/nls.c $(srcdir)/search.c \ - $(srcdir)/shell.c $(srcdir)/savestring.c $(srcdir)/tilde.c \ - $(srcdir)/text.c $(srcdir)/misc.c $(srcdir)/compat.c \ - $(srcdir)/mbutil.c - -# The header files for this library. -HSOURCES = $(srcdir)/readline.h $(srcdir)/rldefs.h $(srcdir)/chardefs.h \ - $(srcdir)/keymaps.h $(srcdir)/history.h $(srcdir)/histlib.h \ - $(srcdir)/posixstat.h $(srcdir)/posixdir.h $(srcdir)/posixjmp.h \ - $(srcdir)/tilde.h $(srcdir)/rlconf.h $(srcdir)/rltty.h \ - $(srcdir)/ansi_stdlib.h $(srcdir)/tcap.h $(srcdir)/rlstdc.h \ - $(srcdir)/xmalloc.h $(srcdir)/rlprivate.h $(srcdir)/rlshell.h \ - $(srcdir)/rltypedefs.h $(srcdir)/rlmbutil.h \ - $(srcdir)/colors.h $(srcdir)/parse-colors.h - -HISTOBJ = history.o histexpand.o histfile.o histsearch.o shell.o mbutil.o -TILDEOBJ = tilde.o -COLORSOBJ = colors.o parse-colors.o -OBJECTS = readline.o vi_mode.o funmap.o keymaps.o parens.o search.o \ - rltty.o complete.o bind.o isearch.o display.o signals.o \ - util.o kill.o undo.o macro.o input.o callback.o terminal.o \ - text.o nls.o misc.o $(HISTOBJ) $(TILDEOBJ) $(COLORSOBJ) \ - xmalloc.o xfree.o compat.o - -# The texinfo files which document this library. -DOCSOURCE = doc/rlman.texinfo doc/rltech.texinfo doc/rluser.texinfo -DOCOBJECT = doc/readline.dvi -DOCSUPPORT = doc/Makefile -DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT) - -CREATED_MAKEFILES = Makefile doc/Makefile examples/Makefile shlib/Makefile -CREATED_CONFIGURE = config.status config.h config.cache config.log \ - stamp-config stamp-h readline.pc -CREATED_TAGS = TAGS tags - -INSTALLED_HEADERS = readline.h chardefs.h keymaps.h history.h tilde.h \ - rlstdc.h rlconf.h rltypedefs.h - -OTHER_DOCS = $(srcdir)/CHANGES $(srcdir)/INSTALL $(srcdir)/README -OTHER_INSTALLED_DOCS = CHANGES INSTALL README - -########################################################################## -TARGETS = @STATIC_TARGET@ @SHARED_TARGET@ -INSTALL_TARGETS = @STATIC_INSTALL_TARGET@ @SHARED_INSTALL_TARGET@ - -all: $(TARGETS) - -everything: all examples - -asan: - ${MAKE} ${MFLAGS} ASAN_CFLAGS='${ASAN_XCFLAGS}' ASAN_LDFLAGS='${ASAN_XLDFLAGS}' everything - -static: $(STATIC_LIBS) - -libreadline.a: $(OBJECTS) - $(RM) $@ - $(AR) $(ARFLAGS) $@ $(OBJECTS) - -test -n "$(RANLIB)" && $(RANLIB) $@ - -libhistory.a: $(HISTOBJ) xmalloc.o xfree.o - $(RM) $@ - $(AR) $(ARFLAGS) $@ $(HISTOBJ) xmalloc.o xfree.o - -test -n "$(RANLIB)" && $(RANLIB) $@ - -# Since tilde.c is shared between readline and bash, make sure we compile -# it with the right flags when it's built as part of readline -tilde.o: tilde.c - rm -f $@ - $(CC) $(CCFLAGS) -DREADLINE_LIBRARY -c $(srcdir)/tilde.c - -readline: $(OBJECTS) readline.h rldefs.h chardefs.h ./libreadline.a - $(CC) $(CCFLAGS) -DREADLINE_LIBRARY -o $@ $(top_srcdir)/examples/rl.c ./libreadline.a ${TERMCAP_LIB} - -lint: force - $(MAKE) $(MFLAGS) CCFLAGS='$(GCC_LINT_CFLAGS)' static - -Makefile makefile: config.status $(srcdir)/Makefile.in - CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status - -Makefiles makefiles: config.status $(srcdir)/Makefile.in - @for mf in $(CREATED_MAKEFILES); do \ - CONFIG_FILES=$$mf CONFIG_HEADERS= $(SHELL) ./config.status ; \ - done - -config.status: configure - $(SHELL) ./config.status --recheck +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: -config.h: stamp-h +install-man: -stamp-h: config.status $(srcdir)/config.h.in - CONFIG_FILES= CONFIG_HEADERS=config.h ./config.status - echo > $@ +install-pdf: install-pdf-recursive -#$(srcdir)/configure: $(srcdir)/configure.ac ## Comment-me-out in distribution -# cd $(srcdir) && autoconf ## Comment-me-out in distribution +install-pdf-am: +install-ps: install-ps-recursive -shared: force - -test -d shlib || mkdir shlib - ( cd shlib ; ${MAKE} ${MFLAGS} all ) +install-ps-am: -documentation: force - -test -d doc || mkdir doc - -( cd doc && $(MAKE) $(MFLAGS) ) - -examples: force - -test -d examples || mkdir examples - -(cd examples && ${MAKE} ${MFLAGS} all ) - -force: - -## GDB LOCAL -## Don't mess with people's installed readline's. -## This tries to install this version of readline over whatever -## version is already installed on the system (which could be a -## newer version). There is no real reason for us to install -## readline along with GDB. GDB links statically against readline, -## so it doesn't depend on us installing it on the system. - -install: - -#install: $(INSTALL_TARGETS) - -install-headers: installdirs ${INSTALLED_HEADERS} - for f in ${INSTALLED_HEADERS}; do \ - $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(includedir)/readline ; \ - done - -uninstall-headers: - -test -n "$(includedir)" && cd $(DESTDIR)$(includedir)/readline && \ - ${RM} ${INSTALLED_HEADERS} - -maybe-uninstall-headers: uninstall-headers - -install-pc: installdirs - -$(INSTALL_DATA) $(BUILD_DIR)/readline.pc $(DESTDIR)$(pkgconfigdir)/readline.pc - -uninstall-pc: - -test -n "$(pkgconfigdir)" && cd $(DESTDIR)$(pkgconfigdir) && \ - ${RM} readline.pc - -maybe-uninstall-pc: uninstall-pc - -install-static: installdirs $(STATIC_LIBS) install-headers install-doc ${install_examples} install-pc - -$(MV) $(DESTDIR)$(libdir)/libreadline.a $(DESTDIR)$(libdir)/libreadline.old - $(INSTALL_DATA) libreadline.a $(DESTDIR)$(libdir)/libreadline.a - -test -n "$(RANLIB)" && $(RANLIB) $(DESTDIR)$(libdir)/libreadline.a - -$(MV) $(DESTDIR)$(libdir)/libhistory.a $(DESTDIR)$(libdir)/libhistory.old - $(INSTALL_DATA) libhistory.a $(DESTDIR)$(libdir)/libhistory.a - -test -n "$(RANLIB)" && $(RANLIB) $(DESTDIR)$(libdir)/libhistory.a - -installdirs: $(srcdir)/support/mkinstalldirs - -$(SHELL) $(srcdir)/support/mkinstalldirs $(DESTDIR)$(includedir) \ - $(DESTDIR)$(includedir)/readline $(DESTDIR)$(libdir) \ - $(DESTDIR)$(infodir) $(DESTDIR)$(man3dir) $(DESTDIR)$(docdir) \ - $(DESTDIR)$(pkgconfigdir) - -uninstall: uninstall-headers uninstall-doc uninstall-examples uninstall-pc - -test -n "$(DESTDIR)$(libdir)" && cd $(DESTDIR)$(libdir) && \ - ${RM} libreadline.a libreadline.old libhistory.a libhistory.old $(SHARED_LIBS) - -( cd shlib; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) - -install-shared: installdirs install-headers shared install-doc install-pc - ( cd shlib ; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} install ) - -uninstall-shared: maybe-uninstall-headers maybe-uninstall-pc - -( cd shlib; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) - -install-examples: installdirs install-headers - -( cd examples ; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} install ) - -uninstall-examples: maybe-uninstall-headers - -( cd examples; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) - -install-doc: installdirs - $(INSTALL_DATA) $(OTHER_DOCS) $(DESTDIR)$(docdir) - -( if test -d doc ; then \ - cd doc && \ - ${MAKE} ${MFLAGS} infodir=$(infodir) DESTDIR=${DESTDIR} install; \ - fi ) - -uninstall-doc: - -( cd $(DESTDIR)$(docdir) && ${RM} ${OTHER_INSTALLED_DOCS} ) - -( if test -d doc ; then \ - cd doc && \ - ${MAKE} ${MFLAGS} infodir=$(infodir) DESTDIR=${DESTDIR} uninstall; \ - fi ) - -TAGS: force - -( cd $(srcdir) && $(ETAGS) $(CSOURCES) $(HSOURCES) ) - -tags: force - -( cd $(srcdir) && $(CTAGS) $(CSOURCES) $(HSOURCES) ) - -clean: force - $(RM) $(OBJECTS) $(STATIC_LIBS) - $(RM) readline readline.exe - ( cd shlib && $(MAKE) $(MFLAGS) $@ ) - -( cd doc && $(MAKE) $(MFLAGS) $@ ) - -( cd examples && $(MAKE) $(MFLAGS) $@ ) - -mostlyclean: clean - ( cd shlib && $(MAKE) $(MFLAGS) $@ ) - -( cd doc && $(MAKE) $(MFLAGS) $@ ) - -( cd examples && $(MAKE) $(MFLAGS) $@ ) - -distclean maintainer-clean: clean - ( cd shlib && $(MAKE) $(MFLAGS) $@ ) - -( cd doc && $(MAKE) $(MFLAGS) $@ ) - -( cd examples && $(MAKE) $(MFLAGS) $@ ) - $(RM) Makefile - $(RM) $(CREATED_CONFIGURE) - $(RM) $(CREATED_TAGS) - -readline.pc: config.status $(srcdir)/readline.pc.in - $(SHELL) config.status - -info dvi html pdf ps: - -( cd doc && $(MAKE) $(MFLAGS) $@ ) - -install-info: -install-dvi: -install-html: -install-pdf: -install-ps: -check: -installcheck: - -dist: force - @echo Readline distributions are created using $(srcdir)/support/mkdist. - @echo Here is a sample of the necessary commands: - @echo bash $(srcdir)/support/mkdist -m $(srcdir)/MANIFEST -s $(srcdir) -r $(RL_LIBRARY_NAME) $(RL_LIBRARY_VERSION) - @echo tar cf $(RL_LIBRARY_NAME)-${RL_LIBRARY_VERSION}.tar ${RL_LIBRARY_NAME}-$(RL_LIBRARY_VERSION) - @echo gzip $(RL_LIBRARY_NAME)-$(RL_LIBRARY_VERSION).tar - -# Tell versions [3.59,3.63) of GNU make not to export all variables. +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ + am--refresh check check-am clean clean-cscope clean-generic \ + cscope cscopelist-am ctags ctags-am distclean \ + distclean-generic distclean-tags dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: - -# Dependencies -bind.o: ansi_stdlib.h posixstat.h -bind.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -bind.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -bind.o: history.h -callback.o: rlconf.h -callback.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -callback.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -compat.o: ${BUILD_DIR}/config.h -compat.o: rlstdc.h rltypedefs.h -complete.o: ansi_stdlib.h posixdir.h posixstat.h -complete.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -complete.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -display.o: ansi_stdlib.h posixstat.h -display.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -display.o: tcap.h -display.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -display.o: history.h rlstdc.h -funmap.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -funmap.o: rlconf.h ansi_stdlib.h rlstdc.h -funmap.o: ${BUILD_DIR}/config.h -histexpand.o: ansi_stdlib.h -histexpand.o: history.h histlib.h rlstdc.h rltypedefs.h -histexpand.o: ${BUILD_DIR}/config.h -histfile.o: ansi_stdlib.h -histfile.o: history.h histlib.h rlstdc.h rltypedefs.h -histfile.o: ${BUILD_DIR}/config.h -history.o: ansi_stdlib.h -history.o: history.h histlib.h rlstdc.h rltypedefs.h -history.o: ${BUILD_DIR}/config.h -histsearch.o: ansi_stdlib.h -histsearch.o: history.h histlib.h rlstdc.h rltypedefs.h -histsearch.o: ${BUILD_DIR}/config.h -input.o: ansi_stdlib.h -input.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -input.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -isearch.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -isearch.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -isearch.o: ansi_stdlib.h history.h rlstdc.h -keymaps.o: emacs_keymap.c vi_keymap.c -keymaps.o: keymaps.h rltypedefs.h chardefs.h rlconf.h ansi_stdlib.h -keymaps.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -keymaps.o: ${BUILD_DIR}/config.h rlstdc.h -kill.o: ansi_stdlib.h -kill.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -kill.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -kill.o: history.h rlstdc.h -macro.o: ansi_stdlib.h -macro.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -macro.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -macro.o: history.h rlstdc.h -mbutil.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -mbutil.o: readline.h keymaps.h rltypedefs.h chardefs.h rlstdc.h -misc.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -misc.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -misc.o: history.h rlstdc.h ansi_stdlib.h -nls.o: ansi_stdlib.h -nls.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -nls.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -nls.o: history.h rlstdc.h -parens.o: rlconf.h -parens.o: ${BUILD_DIR}/config.h -parens.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -readline.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -readline.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -readline.o: history.h rlstdc.h -readline.o: posixstat.h ansi_stdlib.h posixjmp.h -rltty.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -rltty.o: rltty.h -rltty.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -savestring.o: ${BUILD_DIR}/config.h -search.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -search.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -search.o: ansi_stdlib.h history.h rlstdc.h -shell.o: ${BUILD_DIR}/config.h -shell.o: ansi_stdlib.h -signals.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -signals.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -signals.o: history.h rlstdc.h -terminal.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -terminal.o: tcap.h -terminal.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -terminal.o: history.h rlstdc.h -text.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -text.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -text.o: history.h rlstdc.h ansi_stdlib.h -tilde.o: ansi_stdlib.h -tilde.o: ${BUILD_DIR}/config.h -tilde.o: tilde.h -undo.o: ansi_stdlib.h -undo.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -undo.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -undo.o: history.h rlstdc.h -util.o: posixjmp.h ansi_stdlib.h -util.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -util.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -vi_mode.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h -vi_mode.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h -vi_mode.o: history.h ansi_stdlib.h rlstdc.h -xfree.o: ${BUILD_DIR}/config.h -xfree.o: ansi_stdlib.h -xmalloc.o: ${BUILD_DIR}/config.h -xmalloc.o: ansi_stdlib.h - -colors.o: ${BUILD_DIR}/config.h colors.h -colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h -colors.o: rlconf.h -colors.o: ansi_stdlib.h posixstat.h -parse-colors.o: ${BUILD_DIR}/config.h colors.h parse-colors.h -parse-colors.o: rldefs.h rlconf.h -parse-colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h - -bind.o: rlshell.h -histfile.o: rlshell.h -nls.o: rlshell.h -readline.o: rlshell.h -shell.o: rlshell.h -terminal.o: rlshell.h -histexpand.o: rlshell.h - -bind.o: rlprivate.h -callback.o: rlprivate.h -complete.o: rlprivate.h -display.o: rlprivate.h -input.o: rlprivate.h -isearch.o: rlprivate.h -kill.o: rlprivate.h -macro.o: rlprivate.h -mbutil.o: rlprivate.h -misc.o: rlprivate.h -nls.o: rlprivate.h -parens.o: rlprivate.h -readline.o: rlprivate.h -rltty.o: rlprivate.h -search.o: rlprivate.h -signals.o: rlprivate.h -terminal.o: rlprivate.h -text.o: rlprivate.h -undo.o: rlprivate.h -util.o: rlprivate.h -vi_mode.o: rlprivate.h -colors.o: rlprivate.h -parse-colors.o: rlprivate.h - -bind.o: xmalloc.h -callback.o: xmalloc.h -complete.o: xmalloc.h -display.o: xmalloc.h -funmap.o: xmalloc.h -histexpand.o: xmalloc.h -histfile.o: xmalloc.h -history.o: xmalloc.h -input.o: xmalloc.h -isearch.o: xmalloc.h -keymaps.o: xmalloc.h -kill.o: xmalloc.h -macro.o: xmalloc.h -mbutil.o: xmalloc.h -misc.o: xmalloc.h -readline.o: xmalloc.h -savestring.o: xmalloc.h -search.o: xmalloc.h -shell.o: xmalloc.h -terminal.o: xmalloc.h -text.o: xmalloc.h -tilde.o: xmalloc.h -undo.o: xmalloc.h -util.o: xmalloc.h -vi_mode.o: xmalloc.h -xfree.o: xmalloc.h -xmalloc.o: xmalloc.h -colors.o: xmalloc.h -parse-colors.o: xmalloc.h - -complete.o: rlmbutil.h -display.o: rlmbutil.h -histexpand.o: rlmbutil.h -input.o: rlmbutil.h -isearch.o: rlmbutil.h -mbutil.o: rlmbutil.h -misc.o: rlmbutil.h -readline.o: rlmbutil.h -search.o: rlmbutil.h -text.o: rlmbutil.h -vi_mode.o: rlmbutil.h - -bind.o: $(srcdir)/bind.c -callback.o: $(srcdir)/callback.c -compat.o: $(srcdir)/compat.c -complete.o: $(srcdir)/complete.c -display.o: $(srcdir)/display.c -funmap.o: $(srcdir)/funmap.c -input.o: $(srcdir)/input.c -isearch.o: $(srcdir)/isearch.c -keymaps.o: $(srcdir)/keymaps.c $(srcdir)/emacs_keymap.c $(srcdir)/vi_keymap.c -kill.o: $(srcdir)/kill.c -macro.o: $(srcdir)/macro.c -mbutil.o: $(srcdir)/mbutil.c -misc.o: $(srcdir)/misc.c -nls.o: $(srcdir)/nls.c -parens.o: $(srcdir)/parens.c -readline.o: $(srcdir)/readline.c -rltty.o: $(srcdir)/rltty.c -savestring.o: $(srcdir)/savestring.c -search.o: $(srcdir)/search.c -shell.o: $(srcdir)/shell.c -signals.o: $(srcdir)/signals.c -terminal.o: $(srcdir)/terminal.c -text.o: $(srcdir)/text.c -tilde.o: $(srcdir)/tilde.c -undo.o: $(srcdir)/undo.c -util.o: $(srcdir)/util.c -vi_mode.o: $(srcdir)/vi_mode.c -xfree.o: $(srcdir)/xfree.c -xmalloc.o: $(srcdir)/xmalloc.c - -colors.o: $(srcdir)/parse-colors.c -parse-colors.o: $(srcdir)/parse-colors.c - -histexpand.o: $(srcdir)/histexpand.c -histfile.o: $(srcdir)/histfile.c -history.o: $(srcdir)/history.c -histsearch.o: $(srcdir)/histsearch.c - -bind.o: bind.c -callback.o: callback.c -compat.o: compat.c -complete.o: complete.c -display.o: display.c -funmap.o: funmap.c -input.o: input.c -isearch.o: isearch.c -keymaps.o: keymaps.c emacs_keymap.c vi_keymap.c -kill.o: kill.c -macro.o: macro.c -mbutil.o: mbutil.c -misc.o: misc.c -nls.o: nls.c -parens.o: parens.c -readline.o: readline.c -rltty.o: rltty.c -savestring.o: savestring.c -search.o: search.c -shell.o: shell.c -signals.o: signals.c -terminal.o: terminal.c -text.o: text.c -tilde.o: tilde.c -undo.o: undo.c -util.o: util.c -vi_mode.o: vi_mode.c -xfree.o: xfree.c -xmalloc.o: xmalloc.c - -histexpand.o: histexpand.c -histfile.o: histfile.c -history.o: history.c -histsearch.o: histsearch.c diff --git a/readline/NEWS b/readline/NEWS deleted file mode 100644 index 42be21eb02..0000000000 --- a/readline/NEWS +++ /dev/null @@ -1,366 +0,0 @@ -This is a terse description of the new features added to readline-8.0 since -the release of readline-7.0. - -New Features in Readline - -a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as - Posix specifies (uses fnmatch(3) if available). - -b. There are new `next-screen-line' and `previous-screen-line' bindable - commands, which move the cursor to the same column in the next, or previous, - physical line, respectively. - -c. There are default key bindings for control-arrow-key key combinations. - -d. A negative argument (-N) to `quoted-insert' means to insert the next N - characters using quoted-insert. - -e. New public function: rl_check_signals(), which allows applications to - respond to signals that readline catches while waiting for input using - a custom read function. - -f. There is new support for conditionally testing the readline version in an - inputrc file, with a full set of arithmetic comparison operators available. - -g. There is a simple variable comparison facility available for use within an - inputrc file. Allowable operators are equality and inequality; string - variables may be compared to a value; boolean variables must be compared to - either `on' or `off'; variable names are separated from the operator by - whitespace. - -h. The history expansion library now understands command and process - substitution and extended globbing and allows them to appear anywhere in a - word. - -i. The history library has a new variable that allows applications to set the - initial quoting state, so quoting state can be inherited from a previous - line. - -j. Readline now allows application-defined keymap names; there is a new public - function, rl_set_keymap_name(), to do that. - -k. The "Insert" keypad key, if available, now puts readline into overwrite - mode. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-7.0 since -the release of readline-6.3. - -New Features in Readline - -a. The history truncation code now uses the same error recovery mechansim as - the history writing code, and restores the old version of the history file - on error. The error recovery mechanism handles symlinked history files. - -b. There is a new bindable variable, `enable-bracketed-paste', which enables - support for a terminal's bracketed paste mode. - -c. The editing mode indicators can now be strings and are user-settable - (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string' - variables). Mode strings can contain invisible character sequences. - Setting mode strings to null strings restores the defaults. - -d. Prompt expansion adds the mode string to the last line of a multi-line - prompt (one with embedded newlines). - -e. There is a new bindable variable, `colored-completion-prefix', which, if - set, causes the common prefix of a set of possible completions to be - displayed in color. - -f. There is a new bindable command `vi-yank-pop', a vi-mode version of emacs- - mode yank-pop. - -g. The redisplay code underwent several efficiency improvements for multibyte - locales. - -h. The insert-char function attempts to batch-insert all pending typeahead - that maps to self-insert, as long as it is coming from the terminal. - -i. rl_callback_sigcleanup: a new application function that can clean up and - unset any state set by readline's callback mode. Intended to be used - after a signal. - -j. If an incremental search string has its last character removed with DEL, the - resulting empty search string no longer matches the previous line. - -k. If readline reads a history file that begins with `#' (or the value of - the history comment character) and has enabled history timestamps, the history - entries are assumed to be delimited by timestamps. This allows multi-line - history entries. - -l. Readline now throws an error if it parses a key binding without a terminating - `:' or whitespace. - -m. The default binding for ^W in vi mode now uses word boundaries specified - by Posix (vi-unix-word-rubout is bindable command name). - -n. rl_clear_visible_line: new application-callable function; clears all - screen lines occupied by the current visible readline line. - -o. rl_tty_set_echoing: application-callable function that controls whether - or not readline thinks it is echoing terminal output. - -p. Handle >| and strings of digits preceding and following redirection - specifications as single tokens when tokenizing the line for history - expansion. - -q. Fixed a bug with displaying completions when the prefix display length - is greater than the length of the completions to be displayed. - -r. The :p history modifier now applies to the entire line, so any expansion - specifying :p causes the line to be printed instead of expanded. - -s. New application-callable function: rl_pending_signal(): returns the signal - number of any signal readline has caught but not yet handled. - -t. New application-settable variable: rl_persistent_signal_handlers: if set - to a non-zero value, readline will enable the readline-6.2 signal handler - behavior in callback mode: handlers are installed when - rl_callback_handler_install is called and removed removed when a complete - line has been read. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-6.3 since -the release of readline-6.2. - -New Features in Readline - -a. Readline is now more responsive to SIGHUP and other fatal signals when - reading input from the terminal or performing word completion but no - longer attempts to run any not-allowable functions from a signal handler - context. - -b. There are new bindable commands to search the history for the string of - characters between the beginning of the line and the point - (history-substring-search-forward, history-substring-search-backward) - -c. Readline allows quoted strings as the values of variables when setting - them with `set'. As a side effect, trailing spaces and tabs are ignored - when setting a string variable's value. - -d. The history library creates a backup of the history file when writing it - and restores the backup on a write error. - -e. New application-settable variable: rl_filename_stat_hook: a function called - with a filename before using it in a call to stat(2). Bash uses it to - expand shell variables so things like $HOME/Downloads have a slash - appended. - -f. New bindable function `print-last-kbd-macro', prints the most-recently- - defined keyboard macro in a reusable format. - -g. New user-settable variable `colored-stats', enables use of colored text - to denote file types when displaying possible completions (colored analog - of visible-stats). - -h. New user-settable variable `keyseq-timout', acts as an inter-character - timeout when reading input or incremental search strings. - -i. New application-callable function: rl_clear_history. Clears the history list - and frees all readline-associated private data. - -j. New user-settable variable, show-mode-in-prompt, adds a characters to the - beginning of the prompt indicating the current editing mode. - -k. New application-settable variable: rl_input_available_hook; function to be - called when readline detects there is data available on its input file - descriptor. - -l. Readline calls an application-set event hook (rl_event_hook) after it gets - a signal while reading input (read returns -1/EINTR but readline does not - handle the signal immediately) to allow the application to handle or - otherwise note it. - -m. If the user-settable variable `history-size' is set to a value less than - 0, the history list size is unlimited. - -n. New application-settable variable: rl_signal_event_hook; function that is - called when readline is reading terminal input and read(2) is interrupted - by a signal. Currently not called for SIGHUP or SIGTERM. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-6.1 since -the release of readline-6.0. - -New Features in Readline - -a. New bindable function: menu-complete-backward. - -b. In the vi insertion keymap, C-n is now bound to menu-complete by default, - and C-p to menu-complete-backward. - -c. When in vi command mode, repeatedly hitting ESC now does nothing, even - when ESC introduces a bound key sequence. This is closer to how - historical vi behaves. - -d. New bindable function: skip-csi-sequence. Can be used as a default to - consume key sequences generated by keys like Home and End without having - to bind all keys. - -e. New application-settable function: rl_filename_rewrite_hook. Can be used - to rewite or modify filenames read from the file system before they are - compared to the word to be completed. - -f. New bindable variable: skip-completed-text, active when completing in the - middle of a word. If enabled, it means that characters in the completion - that match characters in the remainder of the word are "skipped" rather - than inserted into the line. - -g. The pre-readline-6.0 version of menu completion is available as - "old-menu-complete" for users who do not like the readline-6.0 version. - -h. New bindable variable: echo-control-characters. If enabled, and the - tty ECHOCTL bit is set, controls the echoing of characters corresponding - to keyboard-generated signals. - -i. New bindable variable: enable-meta-key. Controls whether or not readline - sends the smm/rmm sequences if the terminal indicates it has a meta key - that enables eight-bit characters. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-6.0 since -the release of readline-5.2. - -New Features in Readline - -a. A new variable, rl_sort_completion_matches; allows applications to inhibit - match list sorting (but beware: some things don't work right if - applications do this). - -b. A new variable, rl_completion_invoking_key; allows applications to discover - the key that invoked rl_complete or rl_menu_complete. - -c. The functions rl_block_sigint and rl_release_sigint are now public and - available to calling applications who want to protect critical sections - (like redisplay). - -d. The functions rl_save_state and rl_restore_state are now public and - available to calling applications; documented rest of readline's state - flag values. - -e. A new user-settable variable, `history-size', allows setting the maximum - number of entries in the history list. - -f. There is a new implementation of menu completion, with several improvements - over the old; the most notable improvement is a better `completions - browsing' mode. - -g. The menu completion code now uses the rl_menu_completion_entry_function - variable, allowing applications to provide their own menu completion - generators. - -h. There is support for replacing a prefix of a pathname with a `...' when - displaying possible completions. This is controllable by setting the - `completion-prefix-display-length' variable. Matches with a common prefix - longer than this value have the common prefix replaced with `...'. - -i. There is a new `revert-all-at-newline' variable. If enabled, readline will - undo all outstanding changes to all history lines when `accept-line' is - executed. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-5.2 since -the release of readline-5.1. - -New Features in Readline - -a. Calling applications can now set the keyboard timeout to 0, allowing - poll-like behavior. - -b. The value of SYS_INPUTRC (configurable at compilation time) is now used as - the default last-ditch startup file. - -c. The history file reading functions now allow windows-like \r\n line - terminators. - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-5.1 since -the release of readline-5.0. - -New Features in Readline - -a. The key sequence sent by the keypad `delete' key is now automatically - bound to delete-char. - -b. A negative argument to menu-complete now cycles backward through the - completion list. - -c. A new bindable readline variable: bind-tty-special-chars. If non-zero, - readline will bind the terminal special characters to their readline - equivalents when it's called (on by default). - -d. New bindable command: vi-rubout. Saves deleted text for possible - reinsertion, as with any vi-mode `text modification' command; `X' is bound - to this in vi command mode. - -e. If the rl_completion_query_items is set to a value < 0, readline never - asks the user whether or not to view the possible completions. - -f. New application-callable auxiliary function, rl_variable_value, returns - a string corresponding to a readline variable's value. - -g. When parsing inputrc files and variable binding commands, the parser - strips trailing whitespace from values assigned to boolean variables - before checking them. - -h. A new external application-controllable variable that allows the LINES - and COLUMNS environment variables to set the window size regardless of - what the kernel returns. - - -------------------------------------------------------------------------------- -This is a terse description of the new features added to readline-5.0 since -the release of readline-4.3. - -New Features in Readline - -a. History expansion has a new `a' modifier equivalent to the `g' modifier - for compatibility with the BSD csh. - -b. History expansion has a new `G' modifier equivalent to the BSD csh `g' - modifier, which performs a substitution once per word. - -c. All non-incremental search operations may now undo the operation of - replacing the current line with the history line. - -d. The text inserted by an `a' command in vi mode can be reinserted with - `.'. - -e. New bindable variable, `show-all-if-unmodified'. If set, the readline - completer will list possible completions immediately if there is more - than one completion and partial completion cannot be performed. - -f. There is a new application-callable `free_history_entry()' function. - -g. History list entries now contain timestamp information; the history file - functions know how to read and write timestamp information associated - with each entry. - -h. Four new key binding functions have been added: - - rl_bind_key_if_unbound() - rl_bind_key_if_unbound_in_map() - rl_bind_keyseq_if_unbound() - rl_bind_keyseq_if_unbound_in_map() - -i. New application variable, rl_completion_quote_character, set to any - quote character readline finds before it calls the application completion - function. - -j. New application variable, rl_completion_suppress_quote, settable by an - application completion function. If set to non-zero, readline does not - attempt to append a closing quote to a completed word. - -k. New application variable, rl_completion_found_quote, set to a non-zero - value if readline determines that the word to be completed is quoted. - Set before readline calls any application completion function. - -l. New function hook, rl_completion_word_break_hook, called when readline - needs to break a line into words when completion is attempted. Allows - the word break characters to vary based on position in the line. - -m. New bindable command: unix-filename-rubout. Does the same thing as - unix-word-rubout, but adds `/' to the set of word delimiters. - -n. When listing completions, directories have a `/' appended if the - `mark-directories' option has been enabled. diff --git a/readline/README b/readline/README index 4fb0804fca..9500004e78 100644 --- a/readline/README +++ b/readline/README @@ -1,196 +1,14 @@ -Introduction -============ +This is an import of readline that is used by gdb. -This is the Gnu Readline library, version 8.0. +To send patches, follow the gdb patch submission instructions in +../gdb/CONTRIBUTE. For maintainers, see ../gdb/MAINTAINERS. -The Readline library provides a set of functions for use by applications -that allow users to edit command lines as they are typed in. Both -Emacs and vi editing modes are available. The Readline library includes -additional functions to maintain a list of previously-entered command -lines, to recall and perhaps reedit those lines, and perform csh-like -history expansion on previous commands. +If you need to patch readline, please document the changes here. -The history facilites are also placed into a separate library, the -History library, as part of the build process. The History library -may be used without Readline in applications which desire its -capabilities. +To import, copy the upstream readline sources into the "readline" +subdirectory, remembering to (1) remove any files that were deleted +upstream, and (2) merge the one small configure.ac patch that gdb +carries. -The Readline library is free software, distributed under the terms of -the [GNU] General Public License as published by the Free Software -Foundation, version 3 of the License. For more information, see the -file COPYING. - -To build the library, try typing `./configure', then `make'. The -configuration process is automated, so no further intervention should -be necessary. Readline builds with `gcc' by default if it is -available. If you want to use `cc' instead, type - - CC=cc ./configure - -if you are using a Bourne-style shell. If you are not, the following -may work: - - env CC=cc ./configure - -Read the file INSTALL in this directory for more information about how -to customize and control the build process. - -The file rlconf.h contains C preprocessor defines that enable and disable -certain Readline features. - -The special make target `everything' will build the static and shared -libraries (if the target platform supports them) and the examples. - -Examples -======== - -There are several example programs that use Readline features in the -examples directory. The `rl' program is of particular interest. It -is a command-line interface to Readline, suitable for use in shell -scripts in place of `read'. - -Shared Libraries -================ - -There is skeletal support for building shared versions of the -Readline and History libraries. The configure script creates -a Makefile in the `shlib' subdirectory, and typing `make shared' -will cause shared versions of the Readline and History libraries -to be built on supported platforms. - -If `configure' is given the `--enable-shared' option, it will attempt -to build the shared libraries by default on supported platforms. - -Configure calls the script support/shobj-conf to test whether or -not shared library creation is supported and to generate the values -of variables that are substituted into shlib/Makefile. If you -try to build shared libraries on an unsupported platform, `make' -will display a message asking you to update support/shobj-conf for -your platform. - -If you need to update support/shobj-conf, you will need to create -a `stanza' for your operating system and compiler. The script uses -the value of host_os and ${CC} as determined by configure. For -instance, FreeBSD 4.2 with any version of gcc is identified as -`freebsd4.2-gcc*'. - -In the stanza for your operating system-compiler pair, you will need to -define several variables. They are: - -SHOBJ_CC The C compiler used to compile source files into shareable - object files. This is normally set to the value of ${CC} - by configure, and should not need to be changed. - -SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create - position-independent code. If you are using gcc, this - should probably be set to `-fpic'. - -SHOBJ_LD The link editor to be used to create the shared library from - the object files created by $SHOBJ_CC. If you are using - gcc, a value of `gcc' will probably work. - -SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. - If you are using gcc, `-shared' may be all that is necessary. - These should be the flags needed for generic shared object - creation. - -SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library - creation. Many systems use the -R option to the link - editor to embed a path within the library for run-time - library searches. A reasonable value for such systems would - be `-R$(libdir)'. - -SHLIB_LIBS Any additional libraries that shared libraries should be - linked against when they are created. - -SHLIB_LIBPREF The prefix to use when generating the filename of the shared - library. The default is `lib'; Cygwin uses `cyg'. - -SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when - generating the filename of the shared library. Many systems - use `so'; HP-UX uses `sl'. - -SHLIB_LIBVERSION The string to append to the filename to indicate the version - of the shared library. It should begin with $(SHLIB_LIBSUFF), - and possibly include version information that allows the - run-time loader to load the version of the shared library - appropriate for a particular program. Systems using shared - libraries similar to SunOS 4.x use major and minor library - version numbers; for those systems a value of - `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. - Systems based on System V Release 4 don't use minor version - numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. - Other Unix versions use different schemes. - -SHLIB_DLLVERSION The version number for shared libraries that determines API - compatibility between readline versions and the underlying - system. Used only on Cygwin. Defaults to $SHLIB_MAJOR, but - can be overridden at configuration time by defining DLLVERSION - in the environment. - -SHLIB_DOT The character used to separate the name of the shared library - from the suffix and version information. The default is `.'; - systems like Cygwin which don't separate version information - from the library name should set this to the empty string. - -SHLIB_STATUS Set this to `supported' when you have defined the other - necessary variables. Make uses this to determine whether - or not shared library creation should be attempted. - -You should look at the existing stanzas in support/shobj-conf for ideas. - -Once you have updated support/shobj-conf, re-run configure and type -`make shared'. The shared libraries will be created in the shlib -subdirectory. - -If shared libraries are created, `make install' will install them. -You may install only the shared libraries by running `make -install-shared' from the top-level build directory. Running `make -install' in the shlib subdirectory will also work. If you don't want -to install any created shared libraries, run `make install-static'. - -Documentation -============= - -The documentation for the Readline and History libraries appears in -the `doc' subdirectory. There are three texinfo files and a -Unix-style manual page describing the facilities available in the -Readline library. The texinfo files include both user and -programmer's manuals. HTML versions of the manuals appear in the -`doc' subdirectory as well. - -Usage -===== - -Our position on the use of Readline through a shared-library linking -mechanism is that there is no legal difference between shared-library -linking and static linking--either kind of linking combines various -modules into a single larger work. The conditions for using Readline -in a larger work are stated in section 3 of the GNU GPL. - -Reporting Bugs -============== - -Bug reports for Readline should be sent to: - - bug-readline@gnu.org - -When reporting a bug, please include the following information: - - * the version number and release status of Readline (e.g., 4.2-release) - * the machine and OS that it is running on - * a list of the compilation flags or the contents of `config.h', if - appropriate - * a description of the bug - * a recipe for recreating the bug reliably - * a fix for the bug if you have one! - -If you would like to contact the Readline maintainer directly, send mail -to bash-maintainers@gnu.org. - -Since Readline is developed along with bash, the bug-bash@gnu.org mailing -list (mirrored to the Usenet newsgroup gnu.bash.bug) often contains -Readline bug reports and fixes. - -Chet Ramey -chet.ramey@case.edu +If your import removes the need for a local patch, please remember to +update this file. diff --git a/readline/USAGE b/readline/USAGE deleted file mode 100644 index edc9f5417d..0000000000 --- a/readline/USAGE +++ /dev/null @@ -1,37 +0,0 @@ -From rms@gnu.org Thu Jul 22 20:37:55 1999 -Flags: 10 -Return-Path: rms@gnu.org -Received: from arthur.INS.CWRU.Edu (root@arthur.INS.CWRU.Edu [129.22.8.215]) by odin.INS.CWRU.Edu with ESMTP (8.8.6+cwru/CWRU-2.4-ins) - id UAA25349; Thu, 22 Jul 1999 20:37:54 -0400 (EDT) (from rms@gnu.org for ) -Received: from nike.ins.cwru.edu (root@nike.INS.CWRU.Edu [129.22.8.219]) by arthur.INS.CWRU.Edu with ESMTP (8.8.8+cwru/CWRU-3.6) - id UAA05311; Thu, 22 Jul 1999 20:37:51 -0400 (EDT) (from rms@gnu.org for ) -Received: from pele.santafe.edu (pele.santafe.edu [192.12.12.119]) by nike.ins.cwru.edu with ESMTP (8.8.7/CWRU-2.5-bsdi) - id UAA13350; Thu, 22 Jul 1999 20:37:50 -0400 (EDT) (from rms@gnu.org for ) -Received: from wijiji.santafe.edu (wijiji [192.12.12.5]) - by pele.santafe.edu (8.9.1/8.9.1) with ESMTP id SAA10831 - for ; Thu, 22 Jul 1999 18:37:47 -0600 (MDT) -Received: (from rms@localhost) - by wijiji.santafe.edu (8.9.1b+Sun/8.9.1) id SAA01089; - Thu, 22 Jul 1999 18:37:46 -0600 (MDT) -Date: Thu, 22 Jul 1999 18:37:46 -0600 (MDT) -Message-Id: <199907230037.SAA01089@wijiji.santafe.edu> -X-Authentication-Warning: wijiji.santafe.edu: rms set sender to rms@gnu.org using -f -From: Richard Stallman -To: chet@nike.ins.cwru.edu -Subject: Use of Readline -Reply-to: rms@gnu.org - -I think Allbery's suggestion is a good one. So please add this text -in a suitable place. Please don't put it in the GPL itself; that -should be the same as the GPL everywhere else. Putting it in the -README and/or the documentation would be a good idea. - - -====================================================================== -Our position on the use of Readline through a shared-library linking -mechanism is that there is no legal difference between shared-library -linking and static linking--either kind of linking combines various -modules into a single larger work. The conditions for using Readline -in a larger work are stated in section 3 of the GNU GPL. - - diff --git a/readline/aclocal.m4 b/readline/aclocal.m4 index 1413267fc1..27228d7159 100644 --- a/readline/aclocal.m4 +++ b/readline/aclocal.m4 @@ -1,4262 +1,792 @@ -nl -dnl Bash specific tests -dnl -dnl Some derived from PDKSH 5.1.3 autoconf tests -dnl - -AC_DEFUN(BASH_C_LONG_LONG, -[AC_CACHE_CHECK(for long long, ac_cv_c_long_long, -[if test "$GCC" = yes; then - ac_cv_c_long_long=yes -else -AC_TRY_RUN([ -int -main() -{ -long long foo = 0; -exit(sizeof(long long) < sizeof(long)); -} -], ac_cv_c_long_long=yes, ac_cv_c_long_long=no) -fi]) -if test $ac_cv_c_long_long = yes; then - AC_DEFINE(HAVE_LONG_LONG, 1, [Define if the `long long' type works.]) -fi -]) - -dnl -dnl This is very similar to AC_C_LONG_DOUBLE, with the fix for IRIX -dnl (< changed to <=) added. -dnl -AC_DEFUN(BASH_C_LONG_DOUBLE, -[AC_CACHE_CHECK(for long double, ac_cv_c_long_double, -[if test "$GCC" = yes; then - ac_cv_c_long_double=yes -else -AC_TRY_RUN([ -int -main() -{ - /* The Stardent Vistra knows sizeof(long double), but does not - support it. */ - long double foo = 0.0; - /* On Ultrix 4.3 cc, long double is 4 and double is 8. */ - /* On IRIX 5.3, the compiler converts long double to double with a warning, - but compiles this successfully. */ - exit(sizeof(long double) <= sizeof(double)); -} -], ac_cv_c_long_double=yes, ac_cv_c_long_double=no) -fi]) -if test $ac_cv_c_long_double = yes; then - AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if the `long double' type works.]) -fi -]) - -dnl -dnl Check for . This is separated out so that it can be -dnl AC_REQUIREd. -dnl -dnl BASH_HEADER_INTTYPES -AC_DEFUN(BASH_HEADER_INTTYPES, -[ - AC_CHECK_HEADERS(inttypes.h) -]) - -dnl -dnl check for typedef'd symbols in header files, but allow the caller to -dnl specify the include files to be checked in addition to the default -dnl -dnl BASH_CHECK_TYPE(TYPE, HEADERS, DEFAULT[, VALUE-IF-FOUND]) -AC_DEFUN(BASH_CHECK_TYPE, -[ -AC_REQUIRE([AC_HEADER_STDC])dnl -AC_REQUIRE([BASH_HEADER_INTTYPES]) -AC_MSG_CHECKING(for $1) -AC_CACHE_VAL(bash_cv_type_$1, -[AC_EGREP_CPP($1, [#include -#if STDC_HEADERS -#include -#include -#endif -#if HAVE_INTTYPES_H -#include -#endif -#if HAVE_STDINT_H -#include -#endif -$2 -], bash_cv_type_$1=yes, bash_cv_type_$1=no)]) -AC_MSG_RESULT($bash_cv_type_$1) -ifelse($#, 4, [if test $bash_cv_type_$1 = yes; then - AC_DEFINE($4) - fi]) -if test $bash_cv_type_$1 = no; then - AC_DEFINE_UNQUOTED($1, $3) -fi -]) - -dnl -dnl BASH_CHECK_DECL(FUNC) -dnl -dnl Check for a declaration of FUNC in stdlib.h and inttypes.h like -dnl AC_CHECK_DECL -dnl -AC_DEFUN(BASH_CHECK_DECL, -[ -AC_REQUIRE([AC_HEADER_STDC]) -AC_REQUIRE([BASH_HEADER_INTTYPES]) -AC_CACHE_CHECK([for declaration of $1], bash_cv_decl_$1, -[AC_TRY_LINK( -[ -#if STDC_HEADERS -# include -#endif -#if HAVE_INTTYPES_H -# include -#endif -], -[return !$1;], -bash_cv_decl_$1=yes, bash_cv_decl_$1=no)]) -bash_tr_func=HAVE_DECL_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` -if test $bash_cv_decl_$1 = yes; then - AC_DEFINE_UNQUOTED($bash_tr_func, 1) -else - AC_DEFINE_UNQUOTED($bash_tr_func, 0) -fi -]) - -AC_DEFUN(BASH_DECL_PRINTF, -[AC_MSG_CHECKING(for declaration of printf in ) -AC_CACHE_VAL(bash_cv_printf_declared, -[AC_TRY_RUN([ -#include -#ifdef __STDC__ -typedef int (*_bashfunc)(const char *, ...); -#else -typedef int (*_bashfunc)(); -#endif -main() -{ -_bashfunc pf; -pf = (_bashfunc) printf; -exit(pf == 0); -} -], bash_cv_printf_declared=yes, bash_cv_printf_declared=no, - [AC_MSG_WARN(cannot check printf declaration if cross compiling -- defaulting to yes) - bash_cv_printf_declared=yes] -)]) -AC_MSG_RESULT($bash_cv_printf_declared) -if test $bash_cv_printf_declared = yes; then -AC_DEFINE(PRINTF_DECLARED) -fi -]) - -AC_DEFUN(BASH_DECL_SBRK, -[AC_MSG_CHECKING(for declaration of sbrk in ) -AC_CACHE_VAL(bash_cv_sbrk_declared, -[AC_EGREP_HEADER(sbrk, unistd.h, - bash_cv_sbrk_declared=yes, bash_cv_sbrk_declared=no)]) -AC_MSG_RESULT($bash_cv_sbrk_declared) -if test $bash_cv_sbrk_declared = yes; then -AC_DEFINE(SBRK_DECLARED) -fi -]) - -dnl -dnl Check for sys_siglist[] or _sys_siglist[] -dnl -AC_DEFUN(BASH_DECL_UNDER_SYS_SIGLIST, -[AC_MSG_CHECKING([for _sys_siglist in signal.h or unistd.h]) -AC_CACHE_VAL(bash_cv_decl_under_sys_siglist, -[AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif], [ char *msg = _sys_siglist[2]; ], - bash_cv_decl_under_sys_siglist=yes, bash_cv_decl_under_sys_siglist=no, - [AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)])])dnl -AC_MSG_RESULT($bash_cv_decl_under_sys_siglist) -if test $bash_cv_decl_under_sys_siglist = yes; then -AC_DEFINE(UNDER_SYS_SIGLIST_DECLARED) -fi -]) - -AC_DEFUN(BASH_UNDER_SYS_SIGLIST, -[AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST]) -AC_MSG_CHECKING([for _sys_siglist in system C library]) -AC_CACHE_VAL(bash_cv_under_sys_siglist, -[AC_TRY_RUN([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#ifndef UNDER_SYS_SIGLIST_DECLARED -extern char *_sys_siglist[]; -#endif -main() -{ -char *msg = (char *)_sys_siglist[2]; -exit(msg == 0); -}], - bash_cv_under_sys_siglist=yes, bash_cv_under_sys_siglist=no, - [AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no) - bash_cv_under_sys_siglist=no])]) -AC_MSG_RESULT($bash_cv_under_sys_siglist) -if test $bash_cv_under_sys_siglist = yes; then -AC_DEFINE(HAVE_UNDER_SYS_SIGLIST) -fi -]) - -AC_DEFUN(BASH_SYS_SIGLIST, -[AC_REQUIRE([AC_DECL_SYS_SIGLIST]) -AC_MSG_CHECKING([for sys_siglist in system C library]) -AC_CACHE_VAL(bash_cv_sys_siglist, -[AC_TRY_RUN([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif -#if !HAVE_DECL_SYS_SIGLIST -extern char *sys_siglist[]; -#endif -main() -{ -char *msg = sys_siglist[2]; -exit(msg == 0); -}], - bash_cv_sys_siglist=yes, bash_cv_sys_siglist=no, - [AC_MSG_WARN(cannot check for sys_siglist if cross compiling -- defaulting to no) - bash_cv_sys_siglist=no])]) -AC_MSG_RESULT($bash_cv_sys_siglist) -if test $bash_cv_sys_siglist = yes; then -AC_DEFINE(HAVE_SYS_SIGLIST) -fi -]) - -dnl Check for the various permutations of sys_siglist and make sure we -dnl compile in siglist.o if they're not defined -AC_DEFUN(BASH_CHECK_SYS_SIGLIST, [ -AC_REQUIRE([BASH_SYS_SIGLIST]) -AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST]) -AC_REQUIRE([BASH_FUNC_STRSIGNAL]) -if test "$bash_cv_sys_siglist" = no && test "$bash_cv_under_sys_siglist" = no && test "$bash_cv_have_strsignal" = no; then - SIGLIST_O=siglist.o -else - SIGLIST_O= -fi -AC_SUBST([SIGLIST_O]) -]) - -dnl Check for sys_errlist[] and sys_nerr, check for declaration -AC_DEFUN(BASH_SYS_ERRLIST, -[AC_MSG_CHECKING([for sys_errlist and sys_nerr]) -AC_CACHE_VAL(bash_cv_sys_errlist, -[AC_TRY_LINK([#include ], -[extern char *sys_errlist[]; - extern int sys_nerr; - char *msg = sys_errlist[sys_nerr - 1];], - bash_cv_sys_errlist=yes, bash_cv_sys_errlist=no)])dnl -AC_MSG_RESULT($bash_cv_sys_errlist) -if test $bash_cv_sys_errlist = yes; then -AC_DEFINE(HAVE_SYS_ERRLIST) -fi -]) - -dnl -dnl Check if dup2() does not clear the close on exec flag -dnl -AC_DEFUN(BASH_FUNC_DUP2_CLOEXEC_CHECK, -[AC_MSG_CHECKING(if dup2 fails to clear the close-on-exec flag) -AC_CACHE_VAL(bash_cv_dup2_broken, -[AC_TRY_RUN([ -#include -#include -main() -{ - int fd1, fd2, fl; - fd1 = open("/dev/null", 2); - if (fcntl(fd1, 2, 1) < 0) - exit(1); - fd2 = dup2(fd1, 1); - if (fd2 < 0) - exit(2); - fl = fcntl(fd2, 1, 0); - /* fl will be 1 if dup2 did not reset the close-on-exec flag. */ - exit(fl != 1); -} -], bash_cv_dup2_broken=yes, bash_cv_dup2_broken=no, - [AC_MSG_WARN(cannot check dup2 if cross compiling -- defaulting to no) - bash_cv_dup2_broken=no]) -]) -AC_MSG_RESULT($bash_cv_dup2_broken) -if test $bash_cv_dup2_broken = yes; then -AC_DEFINE(DUP2_BROKEN) -fi -]) - -AC_DEFUN(BASH_FUNC_STRSIGNAL, -[AC_MSG_CHECKING([for the existence of strsignal]) -AC_CACHE_VAL(bash_cv_have_strsignal, -[AC_TRY_LINK([#include -#include ], -[char *s = (char *)strsignal(2);], - bash_cv_have_strsignal=yes, bash_cv_have_strsignal=no)]) -AC_MSG_RESULT($bash_cv_have_strsignal) -if test $bash_cv_have_strsignal = yes; then -AC_DEFINE(HAVE_STRSIGNAL) -fi -]) - -dnl Check to see if opendir will open non-directories (not a nice thing) -AC_DEFUN(BASH_FUNC_OPENDIR_CHECK, -[AC_REQUIRE([AC_HEADER_DIRENT])dnl -AC_MSG_CHECKING(if opendir() opens non-directories) -AC_CACHE_VAL(bash_cv_opendir_not_robust, -[AC_TRY_RUN([ -#include -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ -main() -{ -DIR *dir; -int fd, err; -err = mkdir("bash-aclocal", 0700); -if (err < 0) { - perror("mkdir"); - exit(1); -} -unlink("bash-aclocal/not_a_directory"); -fd = open("bash-aclocal/not_a_directory", O_WRONLY|O_CREAT|O_EXCL, 0666); -write(fd, "\n", 1); -close(fd); -dir = opendir("bash-aclocal/not_a_directory"); -unlink("bash-aclocal/not_a_directory"); -rmdir("bash-aclocal"); -exit (dir == 0); -}], bash_cv_opendir_not_robust=yes,bash_cv_opendir_not_robust=no, - [AC_MSG_WARN(cannot check opendir if cross compiling -- defaulting to no) - bash_cv_opendir_not_robust=no] -)]) -AC_MSG_RESULT($bash_cv_opendir_not_robust) -if test $bash_cv_opendir_not_robust = yes; then -AC_DEFINE(OPENDIR_NOT_ROBUST) -fi -]) - -dnl -AC_DEFUN(BASH_TYPE_SIGHANDLER, -[AC_MSG_CHECKING([whether signal handlers are of type void]) -AC_CACHE_VAL(bash_cv_void_sighandler, -[AC_TRY_COMPILE([#include -#include -#ifdef signal -#undef signal -#endif -#ifdef __cplusplus -extern "C" -#endif -void (*signal ()) ();], -[int i;], bash_cv_void_sighandler=yes, bash_cv_void_sighandler=no)])dnl -AC_MSG_RESULT($bash_cv_void_sighandler) -if test $bash_cv_void_sighandler = yes; then -AC_DEFINE(VOID_SIGHANDLER) -fi -]) - -dnl -dnl A signed 16-bit integer quantity -dnl -AC_DEFUN(BASH_TYPE_BITS16_T, -[ -if test "$ac_cv_sizeof_short" = 2; then - AC_CHECK_TYPE(bits16_t, short) -elif test "$ac_cv_sizeof_char" = 2; then - AC_CHECK_TYPE(bits16_t, char) -else - AC_CHECK_TYPE(bits16_t, short) -fi -]) - -dnl -dnl An unsigned 16-bit integer quantity -dnl -AC_DEFUN(BASH_TYPE_U_BITS16_T, -[ -if test "$ac_cv_sizeof_short" = 2; then - AC_CHECK_TYPE(u_bits16_t, unsigned short) -elif test "$ac_cv_sizeof_char" = 2; then - AC_CHECK_TYPE(u_bits16_t, unsigned char) -else - AC_CHECK_TYPE(u_bits16_t, unsigned short) -fi -]) - -dnl -dnl A signed 32-bit integer quantity -dnl -AC_DEFUN(BASH_TYPE_BITS32_T, -[ -if test "$ac_cv_sizeof_int" = 4; then - AC_CHECK_TYPE(bits32_t, int) -elif test "$ac_cv_sizeof_long" = 4; then - AC_CHECK_TYPE(bits32_t, long) -else - AC_CHECK_TYPE(bits32_t, int) -fi -]) - -dnl -dnl An unsigned 32-bit integer quantity -dnl -AC_DEFUN(BASH_TYPE_U_BITS32_T, -[ -if test "$ac_cv_sizeof_int" = 4; then - AC_CHECK_TYPE(u_bits32_t, unsigned int) -elif test "$ac_cv_sizeof_long" = 4; then - AC_CHECK_TYPE(u_bits32_t, unsigned long) -else - AC_CHECK_TYPE(u_bits32_t, unsigned int) -fi -]) - -AC_DEFUN(BASH_TYPE_PTRDIFF_T, -[ -if test "$ac_cv_sizeof_int" = "$ac_cv_sizeof_char_p"; then - AC_CHECK_TYPE(ptrdiff_t, int) -elif test "$ac_cv_sizeof_long" = "$ac_cv_sizeof_char_p"; then - AC_CHECK_TYPE(ptrdiff_t, long) -elif test "$ac_cv_type_long_long" = yes && test "$ac_cv_sizeof_long_long" = "$ac_cv_sizeof_char_p"; then - AC_CHECK_TYPE(ptrdiff_t, [long long]) -else - AC_CHECK_TYPE(ptrdiff_t, int) -fi -]) - -dnl -dnl A signed 64-bit quantity -dnl -AC_DEFUN(BASH_TYPE_BITS64_T, -[ -if test "$ac_cv_sizeof_char_p" = 8; then - AC_CHECK_TYPE(bits64_t, char *) -elif test "$ac_cv_sizeof_double" = 8; then - AC_CHECK_TYPE(bits64_t, double) -elif test -n "$ac_cv_type_long_long" && test "$ac_cv_sizeof_long_long" = 8; then - AC_CHECK_TYPE(bits64_t, [long long]) -elif test "$ac_cv_sizeof_long" = 8; then - AC_CHECK_TYPE(bits64_t, long) -else - AC_CHECK_TYPE(bits64_t, double) -fi -]) - -AC_DEFUN(BASH_TYPE_LONG_LONG, -[ -AC_CACHE_CHECK([for long long], bash_cv_type_long_long, -[AC_TRY_LINK([ -long long ll = 1; int i = 63;], -[ -long long llm = (long long) -1; -return ll << i | ll >> i | llm / ll | llm % ll; -], bash_cv_type_long_long='long long', bash_cv_type_long_long='long')]) -if test "$bash_cv_type_long_long" = 'long long'; then - AC_DEFINE(HAVE_LONG_LONG, 1) -fi -]) - -AC_DEFUN(BASH_TYPE_UNSIGNED_LONG_LONG, -[ -AC_CACHE_CHECK([for unsigned long long], bash_cv_type_unsigned_long_long, -[AC_TRY_LINK([ -unsigned long long ull = 1; int i = 63;], -[ -unsigned long long ullmax = (unsigned long long) -1; -return ull << i | ull >> i | ullmax / ull | ullmax % ull; -], bash_cv_type_unsigned_long_long='unsigned long long', - bash_cv_type_unsigned_long_long='unsigned long')]) -if test "$bash_cv_type_unsigned_long_long" = 'unsigned long long'; then - AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1) -fi -]) - -dnl -dnl Type of struct rlimit fields: some systems (OSF/1, NetBSD, RISC/os 5.0) -dnl have a rlim_t, others (4.4BSD based systems) use quad_t, others use -dnl long and still others use int (HP-UX 9.01, SunOS 4.1.3). To simplify -dnl matters, this just checks for rlim_t, quad_t, or long. -dnl -AC_DEFUN(BASH_TYPE_RLIMIT, -[AC_MSG_CHECKING(for size and type of struct rlimit fields) -AC_CACHE_VAL(bash_cv_type_rlimit, -[AC_TRY_COMPILE([#include -#include ], -[rlim_t xxx;], bash_cv_type_rlimit=rlim_t,[ -AC_TRY_RUN([ -#include -#include -#include -main() -{ -#ifdef HAVE_QUAD_T - struct rlimit rl; - if (sizeof(rl.rlim_cur) == sizeof(quad_t)) - exit(0); -#endif - exit(1); -}], bash_cv_type_rlimit=quad_t, bash_cv_type_rlimit=long, - [AC_MSG_WARN(cannot check quad_t if cross compiling -- defaulting to long) - bash_cv_type_rlimit=long])]) -]) -AC_MSG_RESULT($bash_cv_type_rlimit) -if test $bash_cv_type_rlimit = quad_t; then -AC_DEFINE(RLIMTYPE, quad_t) -elif test $bash_cv_type_rlimit = rlim_t; then -AC_DEFINE(RLIMTYPE, rlim_t) -fi -]) - -AC_DEFUN(BASH_TYPE_SIG_ATOMIC_T, -[AC_CACHE_CHECK([for sig_atomic_t in signal.h], ac_cv_have_sig_atomic_t, -[AC_TRY_LINK([ -#include -],[ sig_atomic_t x; ], -ac_cv_have_sig_atomic_t=yes, ac_cv_have_sig_atomic_t=no)]) -if test "$ac_cv_have_sig_atomic_t" = "no" -then - AC_CHECK_TYPE(sig_atomic_t,int) -fi -]) - -AC_DEFUN(BASH_FUNC_LSTAT, -[dnl Cannot use AC_CHECK_FUNCS(lstat) because Linux defines lstat() as an -dnl inline function in . -AC_CACHE_CHECK([for lstat], bash_cv_func_lstat, -[AC_TRY_LINK([ -#include -#include -],[ lstat(".",(struct stat *)0); ], -bash_cv_func_lstat=yes, bash_cv_func_lstat=no)]) -if test $bash_cv_func_lstat = yes; then - AC_DEFINE(HAVE_LSTAT) -fi -]) - -AC_DEFUN(BASH_FUNC_INET_ATON, -[ -AC_CACHE_CHECK([for inet_aton], bash_cv_func_inet_aton, -[AC_TRY_LINK([ -#include -#include -#include -struct in_addr ap;], [ inet_aton("127.0.0.1", &ap); ], -bash_cv_func_inet_aton=yes, bash_cv_func_inet_aton=no)]) -if test $bash_cv_func_inet_aton = yes; then - AC_DEFINE(HAVE_INET_ATON) -else - AC_LIBOBJ(inet_aton) -fi -]) - -AC_DEFUN(BASH_FUNC_GETENV, -[AC_MSG_CHECKING(to see if getenv can be redefined) -AC_CACHE_VAL(bash_cv_getenv_redef, -[AC_TRY_RUN([ -#ifdef HAVE_UNISTD_H -# include -#endif -#ifndef __STDC__ -# ifndef const -# define const -# endif -#endif -char * -getenv (name) -#if defined (__linux__) || defined (__bsdi__) || defined (convex) - const char *name; -#else - char const *name; -#endif /* !__linux__ && !__bsdi__ && !convex */ -{ -return "42"; -} -main() -{ -char *s; -/* The next allows this program to run, but does not allow bash to link - when it redefines getenv. I'm not really interested in figuring out - why not. */ -#if defined (NeXT) -exit(1); -#endif -s = getenv("ABCDE"); -exit(s == 0); /* force optimizer to leave getenv in */ -} -], bash_cv_getenv_redef=yes, bash_cv_getenv_redef=no, - [AC_MSG_WARN(cannot check getenv redefinition if cross compiling -- defaulting to yes) - bash_cv_getenv_redef=yes] -)]) -AC_MSG_RESULT($bash_cv_getenv_redef) -if test $bash_cv_getenv_redef = yes; then -AC_DEFINE(CAN_REDEFINE_GETENV) -fi -]) - -# We should check for putenv before calling this -AC_DEFUN(BASH_FUNC_STD_PUTENV, -[ -AC_REQUIRE([AC_HEADER_STDC]) -AC_REQUIRE([AC_C_PROTOTYPES]) -AC_CACHE_CHECK([for standard-conformant putenv declaration], bash_cv_std_putenv, -[AC_TRY_LINK([ -#if STDC_HEADERS -#include -#include -#endif -#ifndef __STDC__ -# ifndef const -# define const -# endif -#endif -#ifdef PROTOTYPES -extern int putenv (char *); -#else -extern int putenv (); -#endif -], -[return (putenv == 0);], -bash_cv_std_putenv=yes, bash_cv_std_putenv=no -)]) -if test $bash_cv_std_putenv = yes; then -AC_DEFINE(HAVE_STD_PUTENV) -fi -]) - -# We should check for unsetenv before calling this -AC_DEFUN(BASH_FUNC_STD_UNSETENV, -[ -AC_REQUIRE([AC_HEADER_STDC]) -AC_REQUIRE([AC_C_PROTOTYPES]) -AC_CACHE_CHECK([for standard-conformant unsetenv declaration], bash_cv_std_unsetenv, -[AC_TRY_LINK([ -#if STDC_HEADERS -#include -#include -#endif -#ifndef __STDC__ -# ifndef const -# define const -# endif -#endif -#ifdef PROTOTYPES -extern int unsetenv (const char *); -#else -extern int unsetenv (); -#endif -], -[return (unsetenv == 0);], -bash_cv_std_unsetenv=yes, bash_cv_std_unsetenv=no -)]) -if test $bash_cv_std_unsetenv = yes; then -AC_DEFINE(HAVE_STD_UNSETENV) -fi -]) - -AC_DEFUN(BASH_FUNC_ULIMIT_MAXFDS, -[AC_MSG_CHECKING(whether ulimit can substitute for getdtablesize) -AC_CACHE_VAL(bash_cv_ulimit_maxfds, -[AC_TRY_RUN([ -main() -{ -long maxfds = ulimit(4, 0L); -exit (maxfds == -1L); -} -], bash_cv_ulimit_maxfds=yes, bash_cv_ulimit_maxfds=no, - [AC_MSG_WARN(cannot check ulimit if cross compiling -- defaulting to no) - bash_cv_ulimit_maxfds=no] -)]) -AC_MSG_RESULT($bash_cv_ulimit_maxfds) -if test $bash_cv_ulimit_maxfds = yes; then -AC_DEFINE(ULIMIT_MAXFDS) -fi -]) - -AC_DEFUN(BASH_FUNC_GETCWD, -[AC_MSG_CHECKING([if getcwd() will dynamically allocate memory with 0 size]) -AC_CACHE_VAL(bash_cv_getcwd_malloc, -[AC_TRY_RUN([ -#include -#ifdef HAVE_UNISTD_H -#include -#endif - -main() -{ - char *xpwd; - xpwd = getcwd(0, 0); - exit (xpwd == 0); -} -], bash_cv_getcwd_malloc=yes, bash_cv_getcwd_malloc=no, - [AC_MSG_WARN(cannot check whether getcwd allocates memory when cross-compiling -- defaulting to no) - bash_cv_getcwd_malloc=no] -)]) -AC_MSG_RESULT($bash_cv_getcwd_malloc) -if test $bash_cv_getcwd_malloc = no; then -AC_DEFINE(GETCWD_BROKEN) -AC_LIBOBJ(getcwd) -fi -]) - -dnl -dnl This needs BASH_CHECK_SOCKLIB, but since that's not called on every -dnl system, we can't use AC_PREREQ -dnl -AC_DEFUN(BASH_FUNC_GETHOSTBYNAME, -[if test "X$bash_cv_have_gethostbyname" = "X"; then -_bash_needmsg=yes -else -AC_MSG_CHECKING(for gethostbyname in socket library) -_bash_needmsg= -fi -AC_CACHE_VAL(bash_cv_have_gethostbyname, -[AC_TRY_LINK([#include ], -[ struct hostent *hp; - hp = gethostbyname("localhost"); -], bash_cv_have_gethostbyname=yes, bash_cv_have_gethostbyname=no)] -) -if test "X$_bash_needmsg" = Xyes; then - AC_MSG_CHECKING(for gethostbyname in socket library) -fi -AC_MSG_RESULT($bash_cv_have_gethostbyname) -if test "$bash_cv_have_gethostbyname" = yes; then -AC_DEFINE(HAVE_GETHOSTBYNAME) -fi -]) - -AC_DEFUN(BASH_FUNC_FNMATCH_EXTMATCH, -[AC_MSG_CHECKING(if fnmatch does extended pattern matching with FNM_EXTMATCH) -AC_CACHE_VAL(bash_cv_fnm_extmatch, -[AC_TRY_RUN([ -#include - -main() -{ -#ifdef FNM_EXTMATCH - exit (0); -#else - exit (1); -#endif -} -], bash_cv_fnm_extmatch=yes, bash_cv_fnm_extmatch=no, - [AC_MSG_WARN(cannot check FNM_EXTMATCH if cross compiling -- defaulting to no) - bash_cv_fnm_extmatch=no]) -]) -AC_MSG_RESULT($bash_cv_fnm_extmatch) -if test $bash_cv_fnm_extmatch = yes; then -AC_DEFINE(HAVE_LIBC_FNM_EXTMATCH) -fi -]) - -AC_DEFUN(BASH_FUNC_POSIX_SETJMP, -[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) -AC_MSG_CHECKING(for presence of POSIX-style sigsetjmp/siglongjmp) -AC_CACHE_VAL(bash_cv_func_sigsetjmp, -[AC_TRY_RUN([ -#ifdef HAVE_UNISTD_H -#include -#endif -#include -#include -#include - -main() -{ -#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) -exit (1); -#else - -int code; -sigset_t set, oset; -sigjmp_buf xx; - -/* get the mask */ -sigemptyset(&set); -sigemptyset(&oset); -sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); -sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); - -/* save it */ -code = sigsetjmp(xx, 1); -if (code) - exit(0); /* could get sigmask and compare to oset here. */ - -/* change it */ -sigaddset(&set, SIGINT); -sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); - -/* and siglongjmp */ -siglongjmp(xx, 10); -exit(1); -#endif -}], bash_cv_func_sigsetjmp=present, bash_cv_func_sigsetjmp=missing, - [AC_MSG_WARN(cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing) - bash_cv_func_sigsetjmp=missing] -)]) -AC_MSG_RESULT($bash_cv_func_sigsetjmp) -if test $bash_cv_func_sigsetjmp = present; then -AC_DEFINE(HAVE_POSIX_SIGSETJMP) -fi -]) - -AC_DEFUN(BASH_FUNC_STRCOLL, -[ -AC_MSG_CHECKING(whether or not strcoll and strcmp differ) -AC_CACHE_VAL(bash_cv_func_strcoll_broken, -[AC_TRY_RUN([ -#include -#if defined (HAVE_LOCALE_H) -#include -#endif - -main(c, v) -int c; -char *v[]; -{ - int r1, r2; - char *deflocale, *defcoll; - -#ifdef HAVE_SETLOCALE - deflocale = setlocale(LC_ALL, ""); - defcoll = setlocale(LC_COLLATE, ""); -#endif - -#ifdef HAVE_STRCOLL - /* These two values are taken from tests/glob-test. */ - r1 = strcoll("abd", "aXd"); -#else - r1 = 0; -#endif - r2 = strcmp("abd", "aXd"); - - /* These two should both be greater than 0. It is permissible for - a system to return different values, as long as the sign is the - same. */ - - /* Exit with 1 (failure) if these two values are both > 0, since - this tests whether strcoll(3) is broken with respect to strcmp(3) - in the default locale. */ - exit (r1 > 0 && r2 > 0); -} -], bash_cv_func_strcoll_broken=yes, bash_cv_func_strcoll_broken=no, - [AC_MSG_WARN(cannot check strcoll if cross compiling -- defaulting to no) - bash_cv_func_strcoll_broken=no] -)]) -AC_MSG_RESULT($bash_cv_func_strcoll_broken) -if test $bash_cv_func_strcoll_broken = yes; then -AC_DEFINE(STRCOLL_BROKEN) -fi -]) - -AC_DEFUN(BASH_FUNC_PRINTF_A_FORMAT, -[AC_MSG_CHECKING([for printf floating point output in hex notation]) -AC_CACHE_VAL(bash_cv_printf_a_format, -[AC_TRY_RUN([ -#include -#include - -int -main() -{ - double y = 0.0; - char abuf[1024]; - - sprintf(abuf, "%A", y); - exit(strchr(abuf, 'P') == (char *)0); -} -], bash_cv_printf_a_format=yes, bash_cv_printf_a_format=no, - [AC_MSG_WARN(cannot check printf if cross compiling -- defaulting to no) - bash_cv_printf_a_format=no] -)]) -AC_MSG_RESULT($bash_cv_printf_a_format) -if test $bash_cv_printf_a_format = yes; then -AC_DEFINE(HAVE_PRINTF_A_FORMAT) -fi -]) - -AC_DEFUN(BASH_STRUCT_TERMIOS_LDISC, -[ -AC_CHECK_MEMBER(struct termios.c_line, AC_DEFINE(TERMIOS_LDISC), ,[ -#include -#include -]) -]) - -AC_DEFUN(BASH_STRUCT_TERMIO_LDISC, -[ -AC_CHECK_MEMBER(struct termio.c_line, AC_DEFINE(TERMIO_LDISC), ,[ -#include -#include -]) -]) - -dnl -dnl Like AC_STRUCT_ST_BLOCKS, but doesn't muck with LIBOBJS -dnl -dnl sets bash_cv_struct_stat_st_blocks -dnl -dnl unused for now; we'll see how AC_CHECK_MEMBERS works -dnl -AC_DEFUN(BASH_STRUCT_ST_BLOCKS, -[ -AC_MSG_CHECKING([for struct stat.st_blocks]) -AC_CACHE_VAL(bash_cv_struct_stat_st_blocks, -[AC_TRY_COMPILE( -[ -#include -#include -], -[ -main() -{ -static struct stat a; -if (a.st_blocks) return 0; -return 0; -} -], bash_cv_struct_stat_st_blocks=yes, bash_cv_struct_stat_st_blocks=no) -]) -AC_MSG_RESULT($bash_cv_struct_stat_st_blocks) -if test "$bash_cv_struct_stat_st_blocks" = "yes"; then -AC_DEFINE(HAVE_STRUCT_STAT_ST_BLOCKS) -fi -]) - -AC_DEFUN([BASH_CHECK_LIB_TERMCAP], -[ -if test "X$bash_cv_termcap_lib" = "X"; then -_bash_needmsg=yes -else -AC_MSG_CHECKING(which library has the termcap functions) -_bash_needmsg= -fi -AC_CACHE_VAL(bash_cv_termcap_lib, -[AC_CHECK_FUNC(tgetent, bash_cv_termcap_lib=libc, - [AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap, - [AC_CHECK_LIB(tinfo, tgetent, bash_cv_termcap_lib=libtinfo, - [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses, - [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses, - [AC_CHECK_LIB(ncursesw, tgetent, bash_cv_termcap_lib=libncursesw, - bash_cv_termcap_lib=gnutermcap)])])])])])]) -if test "X$_bash_needmsg" = "Xyes"; then -AC_MSG_CHECKING(which library has the termcap functions) -fi -AC_MSG_RESULT(using $bash_cv_termcap_lib) -if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then -LDFLAGS="$LDFLAGS -L./lib/termcap" -TERMCAP_LIB="./lib/termcap/libtermcap.a" -TERMCAP_DEP="./lib/termcap/libtermcap.a" -elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then -TERMCAP_LIB=-ltermcap -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libtinfo; then -TERMCAP_LIB=-ltinfo -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libncurses; then -TERMCAP_LIB=-lncurses -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libc; then -TERMCAP_LIB= -TERMCAP_DEP= -else -TERMCAP_LIB=-lcurses -TERMCAP_DEP= -fi -]) - -dnl -dnl Check for the presence of getpeername in libsocket. -dnl If libsocket is present, check for libnsl and add it to LIBS if -dnl it's there, since most systems with libsocket require linking -dnl with libnsl as well. This should only be called if getpeername -dnl was not found in libc. -dnl -dnl NOTE: IF WE FIND GETPEERNAME, WE ASSUME THAT WE HAVE BIND/CONNECT -dnl AS WELL -dnl -AC_DEFUN(BASH_CHECK_LIB_SOCKET, -[ -if test "X$bash_cv_have_socklib" = "X"; then -_bash_needmsg= -else -AC_MSG_CHECKING(for socket library) -_bash_needmsg=yes -fi -AC_CACHE_VAL(bash_cv_have_socklib, -[AC_CHECK_LIB(socket, getpeername, - bash_cv_have_socklib=yes, bash_cv_have_socklib=no, -lnsl)]) -if test "X$_bash_needmsg" = Xyes; then - AC_MSG_RESULT($bash_cv_have_socklib) - _bash_needmsg= -fi -if test $bash_cv_have_socklib = yes; then - # check for libnsl, add it to LIBS if present - if test "X$bash_cv_have_libnsl" = "X"; then - _bash_needmsg= - else - AC_MSG_CHECKING(for libnsl) - _bash_needmsg=yes - fi - AC_CACHE_VAL(bash_cv_have_libnsl, - [AC_CHECK_LIB(nsl, t_open, - bash_cv_have_libnsl=yes, bash_cv_have_libnsl=no)]) - if test "X$_bash_needmsg" = Xyes; then - AC_MSG_RESULT($bash_cv_have_libnsl) - _bash_needmsg= - fi - if test $bash_cv_have_libnsl = yes; then - LIBS="-lsocket -lnsl $LIBS" - else - LIBS="-lsocket $LIBS" - fi - AC_DEFINE(HAVE_LIBSOCKET) - AC_DEFINE(HAVE_GETPEERNAME) -fi -]) - -AC_DEFUN(BASH_STRUCT_DIRENT_D_INO, -[AC_REQUIRE([AC_HEADER_DIRENT]) -AC_MSG_CHECKING(for struct dirent.d_ino) -AC_CACHE_VAL(bash_cv_dirent_has_dino, -[AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ -],[ -struct dirent d; int z; z = d.d_ino; -], bash_cv_dirent_has_dino=yes, bash_cv_dirent_has_dino=no)]) -AC_MSG_RESULT($bash_cv_dirent_has_dino) -if test $bash_cv_dirent_has_dino = yes; then -AC_DEFINE(HAVE_STRUCT_DIRENT_D_INO) -fi -]) - -AC_DEFUN(BASH_STRUCT_DIRENT_D_FILENO, -[AC_REQUIRE([AC_HEADER_DIRENT]) -AC_MSG_CHECKING(for struct dirent.d_fileno) -AC_CACHE_VAL(bash_cv_dirent_has_d_fileno, -[AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ -],[ -struct dirent d; int z; z = d.d_fileno; -], bash_cv_dirent_has_d_fileno=yes, bash_cv_dirent_has_d_fileno=no)]) -AC_MSG_RESULT($bash_cv_dirent_has_d_fileno) -if test $bash_cv_dirent_has_d_fileno = yes; then -AC_DEFINE(HAVE_STRUCT_DIRENT_D_FILENO) -fi -]) - -AC_DEFUN(BASH_STRUCT_DIRENT_D_NAMLEN, -[AC_REQUIRE([AC_HEADER_DIRENT]) -AC_MSG_CHECKING(for struct dirent.d_namlen) -AC_CACHE_VAL(bash_cv_dirent_has_d_namlen, -[AC_TRY_COMPILE([ -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ -],[ -struct dirent d; int z; z = d.d_namlen; -], bash_cv_dirent_has_d_namlen=yes, bash_cv_dirent_has_d_namlen=no)]) -AC_MSG_RESULT($bash_cv_dirent_has_d_namlen) -if test $bash_cv_dirent_has_d_namlen = yes; then -AC_DEFINE(HAVE_STRUCT_DIRENT_D_NAMLEN) -fi -]) - -AC_DEFUN(BASH_STRUCT_TIMEVAL, -[AC_MSG_CHECKING(for struct timeval in sys/time.h and time.h) -AC_CACHE_VAL(bash_cv_struct_timeval, -[ -AC_EGREP_HEADER(struct timeval, sys/time.h, - bash_cv_struct_timeval=yes, - AC_EGREP_HEADER(struct timeval, time.h, - bash_cv_struct_timeval=yes, - bash_cv_struct_timeval=no)) -]) -AC_MSG_RESULT($bash_cv_struct_timeval) -if test $bash_cv_struct_timeval = yes; then - AC_DEFINE(HAVE_TIMEVAL) -fi -]) - -AC_DEFUN(BASH_STRUCT_TIMEZONE, -[AC_MSG_CHECKING(for struct timezone in sys/time.h and time.h) -AC_CACHE_VAL(bash_cv_struct_timezone, -[ -AC_EGREP_HEADER(struct timezone, sys/time.h, - bash_cv_struct_timezone=yes, - AC_EGREP_HEADER(struct timezone, time.h, - bash_cv_struct_timezone=yes, - bash_cv_struct_timezone=no)) -]) -AC_MSG_RESULT($bash_cv_struct_timezone) -if test $bash_cv_struct_timezone = yes; then - AC_DEFINE(HAVE_STRUCT_TIMEZONE) -fi -]) - -AC_DEFUN(BASH_STRUCT_WINSIZE, -[AC_MSG_CHECKING(for struct winsize in sys/ioctl.h and termios.h) -AC_CACHE_VAL(bash_cv_struct_winsize_header, -[AC_TRY_COMPILE([#include -#include ], [struct winsize x;], - bash_cv_struct_winsize_header=ioctl_h, - [AC_TRY_COMPILE([#include -#include ], [struct winsize x;], - bash_cv_struct_winsize_header=termios_h, bash_cv_struct_winsize_header=other) -])]) -if test $bash_cv_struct_winsize_header = ioctl_h; then - AC_MSG_RESULT(sys/ioctl.h) - AC_DEFINE(STRUCT_WINSIZE_IN_SYS_IOCTL) -elif test $bash_cv_struct_winsize_header = termios_h; then - AC_MSG_RESULT(termios.h) - AC_DEFINE(STRUCT_WINSIZE_IN_TERMIOS) -else - AC_MSG_RESULT(not found) -fi -]) - -dnl Check type of signal routines (posix, 4.2bsd, 4.1bsd or v7) -AC_DEFUN(BASH_SYS_SIGNAL_VINTAGE, -[AC_REQUIRE([AC_TYPE_SIGNAL]) -AC_MSG_CHECKING(for type of signal functions) -AC_CACHE_VAL(bash_cv_signal_vintage, -[ - AC_TRY_LINK([#include ],[ - sigset_t ss; - struct sigaction sa; - sigemptyset(&ss); sigsuspend(&ss); - sigaction(SIGINT, &sa, (struct sigaction *) 0); - sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); - ], bash_cv_signal_vintage=posix, - [ - AC_TRY_LINK([#include ], [ - int mask = sigmask(SIGINT); - sigsetmask(mask); sigblock(mask); sigpause(mask); - ], bash_cv_signal_vintage=4.2bsd, - [ - AC_TRY_LINK([ - #include - RETSIGTYPE foo() { }], [ - int mask = sigmask(SIGINT); - sigset(SIGINT, foo); sigrelse(SIGINT); - sighold(SIGINT); sigpause(SIGINT); - ], bash_cv_signal_vintage=svr3, bash_cv_signal_vintage=v7 - )] - )] -) -]) -AC_MSG_RESULT($bash_cv_signal_vintage) -if test "$bash_cv_signal_vintage" = posix; then -AC_DEFINE(HAVE_POSIX_SIGNALS) -elif test "$bash_cv_signal_vintage" = "4.2bsd"; then -AC_DEFINE(HAVE_BSD_SIGNALS) -elif test "$bash_cv_signal_vintage" = svr3; then -AC_DEFINE(HAVE_USG_SIGHOLD) -fi -]) - -dnl Check if the pgrp of setpgrp() can't be the pid of a zombie process. -AC_DEFUN(BASH_SYS_PGRP_SYNC, -[AC_REQUIRE([AC_FUNC_GETPGRP]) -AC_MSG_CHECKING(whether pgrps need synchronization) -AC_CACHE_VAL(bash_cv_pgrp_pipe, -[AC_TRY_RUN([ -#ifdef HAVE_UNISTD_H -# include -#endif -main() -{ -# ifdef GETPGRP_VOID -# define getpgID() getpgrp() -# else -# define getpgID() getpgrp(0) -# define setpgid(x,y) setpgrp(x,y) -# endif - int pid1, pid2, fds[2]; - int status; - char ok; - - switch (pid1 = fork()) { - case -1: - exit(1); - case 0: - setpgid(0, getpid()); - exit(0); - } - setpgid(pid1, pid1); - - sleep(2); /* let first child die */ - - if (pipe(fds) < 0) - exit(2); - - switch (pid2 = fork()) { - case -1: - exit(3); - case 0: - setpgid(0, pid1); - ok = getpgID() == pid1; - write(fds[1], &ok, 1); - exit(0); - } - setpgid(pid2, pid1); - - close(fds[1]); - if (read(fds[0], &ok, 1) != 1) - exit(4); - wait(&status); - wait(&status); - exit(ok ? 0 : 5); -} -], bash_cv_pgrp_pipe=no,bash_cv_pgrp_pipe=yes, - [AC_MSG_WARN(cannot check pgrp synchronization if cross compiling -- defaulting to no) - bash_cv_pgrp_pipe=no]) -]) -AC_MSG_RESULT($bash_cv_pgrp_pipe) -if test $bash_cv_pgrp_pipe = yes; then -AC_DEFINE(PGRP_PIPE) -fi -]) - -AC_DEFUN(BASH_SYS_REINSTALL_SIGHANDLERS, -[AC_REQUIRE([AC_TYPE_SIGNAL]) -AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) -AC_MSG_CHECKING([if signal handlers must be reinstalled when invoked]) -AC_CACHE_VAL(bash_cv_must_reinstall_sighandlers, -[AC_TRY_RUN([ -#include -#ifdef HAVE_UNISTD_H -#include -#endif - -typedef RETSIGTYPE sigfunc(); - -volatile int nsigint; - -#ifdef HAVE_POSIX_SIGNALS -sigfunc * -set_signal_handler(sig, handler) - int sig; - sigfunc *handler; -{ - struct sigaction act, oact; - act.sa_handler = handler; - act.sa_flags = 0; - sigemptyset (&act.sa_mask); - sigemptyset (&oact.sa_mask); - sigaction (sig, &act, &oact); - return (oact.sa_handler); -} -#else -#define set_signal_handler(s, h) signal(s, h) -#endif - -RETSIGTYPE -sigint(s) -int s; -{ - nsigint++; -} - -main() -{ - nsigint = 0; - set_signal_handler(SIGINT, sigint); - kill((int)getpid(), SIGINT); - kill((int)getpid(), SIGINT); - exit(nsigint != 2); -} -], bash_cv_must_reinstall_sighandlers=no, bash_cv_must_reinstall_sighandlers=yes, - [AC_MSG_WARN(cannot check signal handling if cross compiling -- defaulting to no) - bash_cv_must_reinstall_sighandlers=no] -)]) -AC_MSG_RESULT($bash_cv_must_reinstall_sighandlers) -if test $bash_cv_must_reinstall_sighandlers = yes; then -AC_DEFINE(MUST_REINSTALL_SIGHANDLERS) -fi -]) - -dnl check that some necessary job control definitions are present -AC_DEFUN(BASH_SYS_JOB_CONTROL_MISSING, -[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) -AC_MSG_CHECKING(for presence of necessary job control definitions) -AC_CACHE_VAL(bash_cv_job_control_missing, -[AC_TRY_COMPILE([ -#include -#ifdef HAVE_SYS_WAIT_H -#include -#endif -#ifdef HAVE_UNISTD_H -#include -#endif -#include - -/* add more tests in here as appropriate */ - -/* signal type */ -#if !defined (HAVE_POSIX_SIGNALS) && !defined (HAVE_BSD_SIGNALS) -#error -#endif - -/* signals and tty control. */ -#if !defined (SIGTSTP) || !defined (SIGSTOP) || !defined (SIGCONT) -#error -#endif - -/* process control */ -#if !defined (WNOHANG) || !defined (WUNTRACED) -#error -#endif - -/* Posix systems have tcgetpgrp and waitpid. */ -#if defined (_POSIX_VERSION) && !defined (HAVE_TCGETPGRP) -#error -#endif - -#if defined (_POSIX_VERSION) && !defined (HAVE_WAITPID) -#error -#endif - -/* Other systems have TIOCSPGRP/TIOCGPRGP and wait3. */ -#if !defined (_POSIX_VERSION) && !defined (HAVE_WAIT3) -#error -#endif - -], , bash_cv_job_control_missing=present, bash_cv_job_control_missing=missing -)]) -AC_MSG_RESULT($bash_cv_job_control_missing) -if test $bash_cv_job_control_missing = missing; then -AC_DEFINE(JOB_CONTROL_MISSING) -fi -]) - -dnl check whether named pipes are present -dnl this requires a previous check for mkfifo, but that is awkward to specify -AC_DEFUN(BASH_SYS_NAMED_PIPES, -[AC_MSG_CHECKING(for presence of named pipes) -AC_CACHE_VAL(bash_cv_sys_named_pipes, -[AC_TRY_RUN([ -#include -#include -#ifdef HAVE_UNISTD_H -#include -#endif - -/* Add more tests in here as appropriate. */ -main() -{ -int fd, err; - -#if defined (HAVE_MKFIFO) -exit (0); -#endif - -#if !defined (S_IFIFO) && (defined (_POSIX_VERSION) && !defined (S_ISFIFO)) -exit (1); -#endif - -#if defined (NeXT) -exit (1); -#endif -err = mkdir("bash-aclocal", 0700); -if (err < 0) { - perror ("mkdir"); - exit(1); -} -fd = mknod ("bash-aclocal/sh-np-autoconf", 0666 | S_IFIFO, 0); -if (fd == -1) { - rmdir ("bash-aclocal"); - exit (1); -} -close(fd); -unlink ("bash-aclocal/sh-np-autoconf"); -rmdir ("bash-aclocal"); -exit(0); -}], bash_cv_sys_named_pipes=present, bash_cv_sys_named_pipes=missing, - [AC_MSG_WARN(cannot check for named pipes if cross-compiling -- defaulting to missing) - bash_cv_sys_named_pipes=missing] -)]) -AC_MSG_RESULT($bash_cv_sys_named_pipes) -if test $bash_cv_sys_named_pipes = missing; then -AC_DEFINE(NAMED_PIPES_MISSING) -fi -]) - -AC_DEFUN(BASH_SYS_DEFAULT_MAIL_DIR, -[AC_MSG_CHECKING(for default mail directory) -AC_CACHE_VAL(bash_cv_mail_dir, -[if test -d /var/mail; then - bash_cv_mail_dir=/var/mail - elif test -d /var/spool/mail; then - bash_cv_mail_dir=/var/spool/mail - elif test -d /usr/mail; then - bash_cv_mail_dir=/usr/mail - elif test -d /usr/spool/mail; then - bash_cv_mail_dir=/usr/spool/mail - else - bash_cv_mail_dir=unknown - fi -]) -AC_MSG_RESULT($bash_cv_mail_dir) -AC_DEFINE_UNQUOTED(DEFAULT_MAIL_DIRECTORY, "$bash_cv_mail_dir") -]) - -AC_DEFUN(BASH_HAVE_TIOCGWINSZ, -[AC_MSG_CHECKING(for TIOCGWINSZ in sys/ioctl.h) -AC_CACHE_VAL(bash_cv_tiocgwinsz_in_ioctl, -[AC_TRY_COMPILE([#include -#include ], [int x = TIOCGWINSZ;], - bash_cv_tiocgwinsz_in_ioctl=yes,bash_cv_tiocgwinsz_in_ioctl=no)]) -AC_MSG_RESULT($bash_cv_tiocgwinsz_in_ioctl) -if test $bash_cv_tiocgwinsz_in_ioctl = yes; then -AC_DEFINE(GWINSZ_IN_SYS_IOCTL) -fi -]) - -AC_DEFUN(BASH_HAVE_TIOCSTAT, -[AC_MSG_CHECKING(for TIOCSTAT in sys/ioctl.h) -AC_CACHE_VAL(bash_cv_tiocstat_in_ioctl, -[AC_TRY_COMPILE([#include -#include ], [int x = TIOCSTAT;], - bash_cv_tiocstat_in_ioctl=yes,bash_cv_tiocstat_in_ioctl=no)]) -AC_MSG_RESULT($bash_cv_tiocstat_in_ioctl) -if test $bash_cv_tiocstat_in_ioctl = yes; then -AC_DEFINE(TIOCSTAT_IN_SYS_IOCTL) -fi -]) - -AC_DEFUN(BASH_HAVE_FIONREAD, -[AC_MSG_CHECKING(for FIONREAD in sys/ioctl.h) -AC_CACHE_VAL(bash_cv_fionread_in_ioctl, -[AC_TRY_COMPILE([#include -#include ], [int x = FIONREAD;], - bash_cv_fionread_in_ioctl=yes,bash_cv_fionread_in_ioctl=no)]) -AC_MSG_RESULT($bash_cv_fionread_in_ioctl) -if test $bash_cv_fionread_in_ioctl = yes; then -AC_DEFINE(FIONREAD_IN_SYS_IOCTL) -fi -]) - -dnl -dnl See if speed_t is declared in . Some versions of linux -dnl require a definition of speed_t each time is included, -dnl but you can only get speed_t if you include (on some -dnl versions) or (on others). -dnl -AC_DEFUN(BASH_CHECK_SPEED_T, -[AC_MSG_CHECKING(for speed_t in sys/types.h) -AC_CACHE_VAL(bash_cv_speed_t_in_sys_types, -[AC_TRY_COMPILE([#include ], [speed_t x;], - bash_cv_speed_t_in_sys_types=yes,bash_cv_speed_t_in_sys_types=no)]) -AC_MSG_RESULT($bash_cv_speed_t_in_sys_types) -if test $bash_cv_speed_t_in_sys_types = yes; then -AC_DEFINE(SPEED_T_IN_SYS_TYPES) -fi -]) - -AC_DEFUN(BASH_CHECK_GETPW_FUNCS, -[AC_MSG_CHECKING(whether getpw functions are declared in pwd.h) -AC_CACHE_VAL(bash_cv_getpw_declared, -[AC_EGREP_CPP(getpwuid, -[ -#include -#ifdef HAVE_UNISTD_H -# include -#endif -#include -], -bash_cv_getpw_declared=yes,bash_cv_getpw_declared=no)]) -AC_MSG_RESULT($bash_cv_getpw_declared) -if test $bash_cv_getpw_declared = yes; then -AC_DEFINE(HAVE_GETPW_DECLS) -fi -]) - -AC_DEFUN(BASH_CHECK_DEV_FD, -[AC_MSG_CHECKING(whether /dev/fd is available) -AC_CACHE_VAL(bash_cv_dev_fd, -[bash_cv_dev_fd="" -if test -d /dev/fd && (exec test -r /dev/fd/0 < /dev/null) ; then -# check for systems like FreeBSD 5 that only provide /dev/fd/[012] - if (exec test -r /dev/fd/3 3 -#include -], -[ - int f; - f = RLIMIT_DATA; -], bash_cv_kernel_rlimit=no, -[AC_TRY_COMPILE([ -#include -#define _KERNEL -#include -#undef _KERNEL -], -[ - int f; - f = RLIMIT_DATA; -], bash_cv_kernel_rlimit=yes, bash_cv_kernel_rlimit=no)] -)]) -AC_MSG_RESULT($bash_cv_kernel_rlimit) -if test $bash_cv_kernel_rlimit = yes; then -AC_DEFINE(RLIMIT_NEEDS_KERNEL) -fi -]) - -dnl -dnl Check for 64-bit off_t -- used for malloc alignment -dnl -dnl C does not allow duplicate case labels, so the compile will fail if -dnl sizeof(off_t) is > 4. -dnl -AC_DEFUN(BASH_CHECK_OFF_T_64, -[AC_CACHE_CHECK(for 64-bit off_t, bash_cv_off_t_64, -AC_TRY_COMPILE([ -#ifdef HAVE_UNISTD_H -#include -#endif -#include -],[ -switch (0) case 0: case (sizeof (off_t) <= 4):; -], bash_cv_off_t_64=no, bash_cv_off_t_64=yes)) -if test $bash_cv_off_t_64 = yes; then - AC_DEFINE(HAVE_OFF_T_64) -fi]) - -AC_DEFUN(BASH_CHECK_RTSIGS, -[AC_MSG_CHECKING(for unusable real-time signals due to large values) -AC_CACHE_VAL(bash_cv_unusable_rtsigs, -[AC_TRY_RUN([ -#include -#include - -#ifndef NSIG -# define NSIG 64 -#endif - -main () -{ - int n_sigs = 2 * NSIG; -#ifdef SIGRTMIN - int rtmin = SIGRTMIN; -#else - int rtmin = 0; -#endif - - exit(rtmin < n_sigs); -}], bash_cv_unusable_rtsigs=yes, bash_cv_unusable_rtsigs=no, - [AC_MSG_WARN(cannot check real-time signals if cross compiling -- defaulting to yes) - bash_cv_unusable_rtsigs=yes] -)]) -AC_MSG_RESULT($bash_cv_unusable_rtsigs) -if test $bash_cv_unusable_rtsigs = yes; then -AC_DEFINE(UNUSABLE_RT_SIGNALS) -fi -]) - -dnl -dnl check for availability of multibyte characters and functions -dnl -dnl geez, I wish I didn't have to check for all of this stuff separately -dnl -AC_DEFUN(BASH_CHECK_MULTIBYTE, -[ -AC_CHECK_HEADERS(wctype.h) -AC_CHECK_HEADERS(wchar.h) -AC_CHECK_HEADERS(langinfo.h) - -AC_CHECK_HEADERS(mbstr.h) - -AC_CHECK_FUNC(mbrlen, AC_DEFINE(HAVE_MBRLEN)) -AC_CHECK_FUNC(mbscasecmp, AC_DEFINE(HAVE_MBSCMP)) -AC_CHECK_FUNC(mbscmp, AC_DEFINE(HAVE_MBSCMP)) -AC_CHECK_FUNC(mbsnrtowcs, AC_DEFINE(HAVE_MBSNRTOWCS)) -AC_CHECK_FUNC(mbsrtowcs, AC_DEFINE(HAVE_MBSRTOWCS)) - -AC_REPLACE_FUNCS(mbschr) - -AC_CHECK_FUNC(wcrtomb, AC_DEFINE(HAVE_WCRTOMB)) -AC_CHECK_FUNC(wcscoll, AC_DEFINE(HAVE_WCSCOLL)) -AC_CHECK_FUNC(wcsdup, AC_DEFINE(HAVE_WCSDUP)) -AC_CHECK_FUNC(wcwidth, AC_DEFINE(HAVE_WCWIDTH)) -AC_CHECK_FUNC(wctype, AC_DEFINE(HAVE_WCTYPE)) - -AC_REPLACE_FUNCS(wcswidth) - -dnl checks for both mbrtowc and mbstate_t -AC_FUNC_MBRTOWC -if test $ac_cv_func_mbrtowc = yes; then - AC_DEFINE(HAVE_MBSTATE_T) -fi - -AC_CHECK_FUNCS(iswlower iswupper towlower towupper iswctype) - -AC_CACHE_CHECK([for nl_langinfo and CODESET], bash_cv_langinfo_codeset, -[AC_TRY_LINK( -[#include ], -[char* cs = nl_langinfo(CODESET);], -bash_cv_langinfo_codeset=yes, bash_cv_langinfo_codeset=no)]) -if test $bash_cv_langinfo_codeset = yes; then - AC_DEFINE(HAVE_LANGINFO_CODESET) -fi - -dnl check for wchar_t in -AC_CACHE_CHECK([for wchar_t in wchar.h], bash_cv_type_wchar_t, -[AC_TRY_COMPILE( -[#include -], -[ - wchar_t foo; - foo = 0; -], bash_cv_type_wchar_t=yes, bash_cv_type_wchar_t=no)]) -if test $bash_cv_type_wchar_t = yes; then - AC_DEFINE(HAVE_WCHAR_T, 1, [systems should define this type here]) -fi - -dnl check for wctype_t in -AC_CACHE_CHECK([for wctype_t in wctype.h], bash_cv_type_wctype_t, -[AC_TRY_COMPILE( -[#include ], -[ - wctype_t foo; - foo = 0; -], bash_cv_type_wctype_t=yes, bash_cv_type_wctype_t=no)]) -if test $bash_cv_type_wctype_t = yes; then - AC_DEFINE(HAVE_WCTYPE_T, 1, [systems should define this type here]) -fi - -dnl check for wint_t in -AC_CACHE_CHECK([for wint_t in wctype.h], bash_cv_type_wint_t, -[AC_TRY_COMPILE( -[#include ], -[ - wint_t foo; - foo = 0; -], bash_cv_type_wint_t=yes, bash_cv_type_wint_t=no)]) -if test $bash_cv_type_wint_t = yes; then - AC_DEFINE(HAVE_WINT_T, 1, [systems should define this type here]) -fi - -dnl check for broken wcwidth -AC_CACHE_CHECK([for wcwidth broken with unicode combining characters], -bash_cv_wcwidth_broken, -[AC_TRY_RUN([ -#include -#include -#include - -#include -#include - -main(c, v) -int c; -char **v; -{ - int w; - - setlocale(LC_ALL, "en_US.UTF-8"); - w = wcwidth (0x0301); - exit (w == 0); /* exit 0 if wcwidth broken */ -} -], -bash_cv_wcwidth_broken=yes, bash_cv_wcwidth_broken=no, bash_cv_wcwidth_broken=no)]) -if test "$bash_cv_wcwidth_broken" = yes; then - AC_DEFINE(WCWIDTH_BROKEN, 1, [wcwidth is usually not broken]) -fi - -if test "$am_cv_func_iconv" = yes; then - OLDLIBS="$LIBS" - LIBS="$LIBS $LIBINTL $LIBICONV" - AC_CHECK_FUNCS(locale_charset) - LIBS="$OLDLIBS" -fi - -AC_CHECK_SIZEOF(wchar_t, 4) - -]) - -dnl need: prefix exec_prefix libdir includedir CC TERMCAP_LIB -dnl require: -dnl AC_PROG_CC -dnl BASH_CHECK_LIB_TERMCAP - -AC_DEFUN([RL_LIB_READLINE_VERSION], -[ -AC_REQUIRE([BASH_CHECK_LIB_TERMCAP]) - -AC_MSG_CHECKING([version of installed readline library]) - -# What a pain in the ass this is. - -# save cpp and ld options -_save_CFLAGS="$CFLAGS" -_save_LDFLAGS="$LDFLAGS" -_save_LIBS="$LIBS" - -# Don't set ac_cv_rl_prefix if the caller has already assigned a value. This -# allows the caller to do something like $_rl_prefix=$withval if the user -# specifies --with-installed-readline=PREFIX as an argument to configure - -if test -z "$ac_cv_rl_prefix"; then -test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix} -fi - -eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include -eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib - -LIBS="$LIBS -lreadline ${TERMCAP_LIB}" -CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}" -LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}" - -AC_CACHE_VAL(ac_cv_rl_version, -[AC_TRY_RUN([ -#include -#include - -extern int rl_gnu_readline_p; - -main() -{ - FILE *fp; - fp = fopen("conftest.rlv", "w"); - if (fp == 0) - exit(1); - if (rl_gnu_readline_p != 1) - fprintf(fp, "0.0\n"); - else - fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0"); - fclose(fp); - exit(0); -} -], -ac_cv_rl_version=`cat conftest.rlv`, -ac_cv_rl_version='0.0', -ac_cv_rl_version='8.0')]) - -CFLAGS="$_save_CFLAGS" -LDFLAGS="$_save_LDFLAGS" -LIBS="$_save_LIBS" - -RL_MAJOR=0 -RL_MINOR=0 - -# ( -case "$ac_cv_rl_version" in -2*|3*|4*|5*|6*|7*|8*|9*) - RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'` - RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[[a-zA-Z]]*$::'` - ;; -esac - -# ((( -case $RL_MAJOR in -[[0-9][0-9]]) _RL_MAJOR=$RL_MAJOR ;; -[[0-9]]) _RL_MAJOR=0$RL_MAJOR ;; -*) _RL_MAJOR=00 ;; -esac - -# ((( -case $RL_MINOR in -[[0-9][0-9]]) _RL_MINOR=$RL_MINOR ;; -[[0-9]]) _RL_MINOR=0$RL_MINOR ;; -*) _RL_MINOR=00 ;; -esac - -RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}" - -# Readline versions greater than 4.2 have these defines in readline.h - -if test $ac_cv_rl_version = '0.0' ; then - AC_MSG_WARN([Could not test version of installed readline library.]) -elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then - # set these for use by the caller - RL_PREFIX=$ac_cv_rl_prefix - RL_LIBDIR=$ac_cv_rl_libdir - RL_INCLUDEDIR=$ac_cv_rl_includedir - AC_MSG_RESULT($ac_cv_rl_version) -else - -AC_DEFINE_UNQUOTED(RL_READLINE_VERSION, $RL_VERSION, [encoded version of the installed readline library]) -AC_DEFINE_UNQUOTED(RL_VERSION_MAJOR, $RL_MAJOR, [major version of installed readline library]) -AC_DEFINE_UNQUOTED(RL_VERSION_MINOR, $RL_MINOR, [minor version of installed readline library]) - -AC_SUBST(RL_VERSION) -AC_SUBST(RL_MAJOR) -AC_SUBST(RL_MINOR) - -# set these for use by the caller -RL_PREFIX=$ac_cv_rl_prefix -RL_LIBDIR=$ac_cv_rl_libdir -RL_INCLUDEDIR=$ac_cv_rl_includedir - -AC_MSG_RESULT($ac_cv_rl_version) - -fi -]) - -AC_DEFUN(BASH_FUNC_CTYPE_NONASCII, -[ -AC_MSG_CHECKING(whether the ctype macros accept non-ascii characters) -AC_CACHE_VAL(bash_cv_func_ctype_nonascii, -[AC_TRY_RUN([ -#ifdef HAVE_LOCALE_H -#include -#endif -#include -#include - -main(c, v) -int c; -char *v[]; -{ - char *deflocale; - unsigned char x; - int r1, r2; - -#ifdef HAVE_SETLOCALE - /* We take a shot here. If that locale is not known, try the - system default. We try this one because '\342' (226) is - known to be a printable character in that locale. */ - deflocale = setlocale(LC_ALL, "en_US.ISO8859-1"); - if (deflocale == 0) - deflocale = setlocale(LC_ALL, ""); -#endif - - x = '\342'; - r1 = isprint(x); - x -= 128; - r2 = isprint(x); - exit (r1 == 0 || r2 == 0); -} -], bash_cv_func_ctype_nonascii=yes, bash_cv_func_ctype_nonascii=no, - [AC_MSG_WARN(cannot check ctype macros if cross compiling -- defaulting to no) - bash_cv_func_ctype_nonascii=no] -)]) -AC_MSG_RESULT($bash_cv_func_ctype_nonascii) -if test $bash_cv_func_ctype_nonascii = yes; then -AC_DEFINE(CTYPE_NON_ASCII) -fi -]) - -AC_DEFUN(BASH_CHECK_WCONTINUED, -[ -AC_MSG_CHECKING(whether WCONTINUED flag to waitpid is unavailable or available but broken) -AC_CACHE_VAL(bash_cv_wcontinued_broken, -[AC_TRY_RUN([ -#include -#include -#include -#include - -#ifndef errno -extern int errno; -#endif -main() -{ - int x; - - x = waitpid(-1, (int *)0, WNOHANG|WCONTINUED); - if (x == -1 && errno == EINVAL) - exit (1); - else - exit (0); -} -], bash_cv_wcontinued_broken=no,bash_cv_wcontinued_broken=yes, - [AC_MSG_WARN(cannot check WCONTINUED if cross compiling -- defaulting to no) - bash_cv_wcontinued_broken=no] -)]) -AC_MSG_RESULT($bash_cv_wcontinued_broken) -if test $bash_cv_wcontinued_broken = yes; then -AC_DEFINE(WCONTINUED_BROKEN) -fi -]) - -dnl -dnl tests added for bashdb -dnl - - -AC_DEFUN([AM_PATH_LISPDIR], - [AC_ARG_WITH(lispdir, AC_HELP_STRING([--with-lispdir], [override the default lisp directory]), - [ lispdir="$withval" - AC_MSG_CHECKING([where .elc files should go]) - AC_MSG_RESULT([$lispdir])], - [ - # If set to t, that means we are running in a shell under Emacs. - # If you have an Emacs named "t", then use the full path. - test x"$EMACS" = xt && EMACS= - AC_CHECK_PROGS(EMACS, emacs xemacs, no) - if test $EMACS != "no"; then - if test x${lispdir+set} != xset; then - AC_CACHE_CHECK([where .elc files should go], [am_cv_lispdir], [dnl - am_cv_lispdir=`$EMACS -batch -q -eval '(while load-path (princ (concat (car load-path) "\n")) (setq load-path (cdr load-path)))' | sed -n -e 's,/$,,' -e '/.*\/lib\/\(x\?emacs\/site-lisp\)$/{s,,${libdir}/\1,;p;q;}' -e '/.*\/share\/\(x\?emacs\/site-lisp\)$/{s,,${datadir}/\1,;p;q;}'` - if test -z "$am_cv_lispdir"; then - am_cv_lispdir='${datadir}/emacs/site-lisp' - fi - ]) - lispdir="$am_cv_lispdir" - fi - fi - ]) - AC_SUBST(lispdir) -]) - -dnl -dnl tests added for gettext -dnl -# codeset.m4 serial AM1 (gettext-0.10.40) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -AC_DEFUN([AM_LANGINFO_CODESET], -[ - AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, - [AC_TRY_LINK([#include ], - [char* cs = nl_langinfo(CODESET);], - am_cv_langinfo_codeset=yes, - am_cv_langinfo_codeset=no) - ]) - if test $am_cv_langinfo_codeset = yes; then - AC_DEFINE(HAVE_LANGINFO_CODESET, 1, - [Define if you have and nl_langinfo(CODESET).]) - fi -]) -# gettext.m4 serial 20 (gettext-0.12) -dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -dnl Macro to add for using GNU gettext. - -dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). -dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The -dnl default (if it is not specified or empty) is 'no-libtool'. -dnl INTLSYMBOL should be 'external' for packages with no intl directory, -dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. -dnl If INTLSYMBOL is 'use-libtool', then a libtool library -dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, -dnl depending on --{enable,disable}-{shared,static} and on the presence of -dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library -dnl $(top_builddir)/intl/libintl.a will be created. -dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext -dnl implementations (in libc or libintl) without the ngettext() function -dnl will be ignored. If NEEDSYMBOL is specified and is -dnl 'need-formatstring-macros', then GNU gettext implementations that don't -dnl support the ISO C 99 formatstring macros will be ignored. -dnl INTLDIR is used to find the intl libraries. If empty, -dnl the value `$(top_builddir)/intl/' is used. -dnl -dnl The result of the configuration is one of three cases: -dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled -dnl and used. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 2) GNU gettext has been found in the system's C library. -dnl Catalog format: GNU --> install in $(datadir) -dnl Catalog extension: .mo after installation, .gmo in source tree -dnl 3) No internationalization, always use English msgid. -dnl Catalog format: none -dnl Catalog extension: none -dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. -dnl The use of .gmo is historical (it was needed to avoid overwriting the -dnl GNU format catalogs when building on a platform with an X/Open gettext), -dnl but we keep it in order not to force irrelevant filename changes on the -dnl maintainers. -dnl -AC_DEFUN([AM_GNU_GETTEXT], -[ - dnl Argument checking. - ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , - [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT -])])])])]) - ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , - [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT -])])])]) - define(gt_included_intl, ifelse([$1], [external], [no], [yes])) - define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) - - AC_REQUIRE([AM_PO_SUBDIRS])dnl - ifelse(gt_included_intl, yes, [ - AC_REQUIRE([AM_INTL_SUBDIR])dnl - ]) - - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Sometimes libintl requires libiconv, so first search for libiconv. - dnl Ideally we would do this search only after the - dnl if test "$USE_NLS" = "yes"; then - dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then - dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT - dnl the configure script would need to contain the same shell code - dnl again, outside any 'if'. There are two solutions: - dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. - dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. - dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not - dnl documented, we avoid it. - ifelse(gt_included_intl, yes, , [ - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - ]) - - dnl Set USE_NLS. - AM_NLS - - ifelse(gt_included_intl, yes, [ - BUILD_INCLUDED_LIBINTL=no - USE_INCLUDED_LIBINTL=no - ]) - LIBINTL= - LTLIBINTL= - POSUB= - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - gt_use_preinstalled_gnugettext=no - ifelse(gt_included_intl, yes, [ - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH(included-gettext, - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - ]) - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If GNU gettext is available we use this. Else we have - dnl to fall back to GNU NLS library. - - dnl Add a version number to the cache macros. - define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1))) - define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) - define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) - - AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, - [AC_TRY_LINK([#include -]ifelse([$2], [need-formatstring-macros], -[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -], [])[extern int _nl_msg_cat_cntr; -extern int *_nl_domain_bindings;], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], - gt_cv_func_gnugettext_libc=yes, - gt_cv_func_gnugettext_libc=no)]) - - if test "$gt_cv_func_gnugettext_libc" != "yes"; then - dnl Sometimes libintl requires libiconv, so first search for libiconv. - ifelse(gt_included_intl, yes, , [ - AM_ICONV_LINK - ]) - dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL - dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) - dnl because that would add "-liconv" to LIBINTL and LTLIBINTL - dnl even if libiconv doesn't exist. - AC_LIB_LINKFLAGS_BODY([intl]) - AC_CACHE_CHECK([for GNU gettext in libintl], - gt_cv_func_gnugettext_libintl, - [gt_save_CPPFLAGS="$CPPFLAGS" - CPPFLAGS="$CPPFLAGS $INCINTL" - gt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBINTL" - dnl Now see whether libintl exists and does not depend on libiconv. - AC_TRY_LINK([#include -]ifelse([$2], [need-formatstring-macros], -[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -], [])[extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias ();], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], - gt_cv_func_gnugettext_libintl=yes, - gt_cv_func_gnugettext_libintl=no) - dnl Now see whether libintl exists and depends on libiconv. - if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -]ifelse([$2], [need-formatstring-macros], -[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION -#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) -#endif -changequote(,)dnl -typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; -changequote([,])dnl -], [])[extern int _nl_msg_cat_cntr; -extern -#ifdef __cplusplus -"C" -#endif -const char *_nl_expand_alias ();], - [bindtextdomain ("", ""); -return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], - [LIBINTL="$LIBINTL $LIBICONV" - LTLIBINTL="$LTLIBINTL $LTLIBICONV" - gt_cv_func_gnugettext_libintl=yes - ]) - fi - CPPFLAGS="$gt_save_CPPFLAGS" - LIBS="$gt_save_LIBS"]) - fi - - dnl If an already present or preinstalled GNU gettext() is found, - dnl use it. But if this macro is used in GNU gettext, and GNU - dnl gettext is already preinstalled in libintl, we update this - dnl libintl. (Cf. the install rule in intl/Makefile.in.) - if test "$gt_cv_func_gnugettext_libc" = "yes" \ - || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ - && test "$PACKAGE" != gettext-runtime \ - && test "$PACKAGE" != gettext-tools; }; then - gt_use_preinstalled_gnugettext=yes - else - dnl Reset the values set by searching for libintl. - LIBINTL= - LTLIBINTL= - INCINTL= - fi - - ifelse(gt_included_intl, yes, [ - if test "$gt_use_preinstalled_gnugettext" != "yes"; then - dnl GNU gettext is not found in the C library. - dnl Fall back on included GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - BUILD_INCLUDED_LIBINTL=yes - USE_INCLUDED_LIBINTL=yes - LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" - LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" - LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` - fi - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions to use GNU gettext tools. - CATOBJEXT=.gmo - fi - ]) - - if test "$gt_use_preinstalled_gnugettext" = "yes" \ - || test "$nls_cv_use_gnu_gettext" = "yes"; then - AC_DEFINE(ENABLE_NLS, 1, - [Define to 1 if translation of program messages to the user's native language - is requested.]) - else - USE_NLS=no - fi - fi - - AC_MSG_CHECKING([whether to use NLS]) - AC_MSG_RESULT([$USE_NLS]) - if test "$USE_NLS" = "yes"; then - AC_MSG_CHECKING([where the gettext function comes from]) - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if test "$gt_cv_func_gnugettext_libintl" = "yes"; then - gt_source="external libintl" - else - gt_source="libc" - fi - else - gt_source="included intl directory" - fi - AC_MSG_RESULT([$gt_source]) - fi - - if test "$USE_NLS" = "yes"; then - - if test "$gt_use_preinstalled_gnugettext" = "yes"; then - if test "$gt_cv_func_gnugettext_libintl" = "yes"; then - AC_MSG_CHECKING([how to link with libintl]) - AC_MSG_RESULT([$LIBINTL]) - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) - fi - - dnl For backward compatibility. Some packages may be using this. - AC_DEFINE(HAVE_GETTEXT, 1, - [Define if the GNU gettext() function is already present or preinstalled.]) - AC_DEFINE(HAVE_DCGETTEXT, 1, - [Define if the GNU dcgettext() function is already present or preinstalled.]) - fi - - dnl We need to process the po/ directory. - POSUB=po - fi - - ifelse(gt_included_intl, yes, [ - dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL - dnl to 'yes' because some of the testsuite requires it. - if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then - BUILD_INCLUDED_LIBINTL=yes - fi - - dnl Make all variables we use known to autoconf. - AC_SUBST(BUILD_INCLUDED_LIBINTL) - AC_SUBST(USE_INCLUDED_LIBINTL) - AC_SUBST(CATOBJEXT) - - dnl For backward compatibility. Some configure.ins may be using this. - nls_cv_header_intl= - nls_cv_header_libgt= - - dnl For backward compatibility. Some Makefiles may be using this. - DATADIRNAME=share - AC_SUBST(DATADIRNAME) - - dnl For backward compatibility. Some Makefiles may be using this. - INSTOBJEXT=.mo - AC_SUBST(INSTOBJEXT) - - dnl For backward compatibility. Some Makefiles may be using this. - GENCAT=gencat - AC_SUBST(GENCAT) - - dnl For backward compatibility. Some Makefiles may be using this. - if test "$USE_INCLUDED_LIBINTL" = yes; then - INTLOBJS="\$(GETTOBJS)" - fi - AC_SUBST(INTLOBJS) - - dnl Enable libtool support if the surrounding package wishes it. - INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix - AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) - ]) - - dnl For backward compatibility. Some Makefiles may be using this. - INTLLIBS="$LIBINTL" - AC_SUBST(INTLLIBS) - - dnl Make all documented variables known to autoconf. - AC_SUBST(LIBINTL) - AC_SUBST(LTLIBINTL) - AC_SUBST(POSUB) -]) - - -dnl Checks for all prerequisites of the intl subdirectory, -dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, -dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. -AC_DEFUN([AM_INTL_SUBDIR], -[ - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_MKINSTALLDIRS])dnl - AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_CANONICAL_HOST])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_ISC_POSIX])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_C_CONST])dnl - AC_REQUIRE([AC_C_INLINE])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - AC_REQUIRE([jm_GLIBC21])dnl - AC_REQUIRE([gt_INTDIV0])dnl - AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl - AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl - AC_REQUIRE([gt_INTTYPES_PRI])dnl - - AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ -stdlib.h string.h unistd.h sys/param.h]) - AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ -geteuid getgid getuid mempcpy munmap putenv setenv setlocale localeconv stpcpy \ -strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ -__fsetlocking]) - - AM_ICONV - AM_LANGINFO_CODESET - if test $ac_cv_header_locale_h = yes; then - AM_LC_MESSAGES - fi - - dnl intl/plural.c is generated from intl/plural.y. It requires bison, - dnl because plural.y uses bison specific features. It requires at least - dnl bison-1.26 because earlier versions generate a plural.c that doesn't - dnl compile. - dnl bison is only needed for the maintainer (who touches plural.y). But in - dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put - dnl the rule in general Makefile. Now, some people carelessly touch the - dnl files or have a broken "make" program, hence the plural.c rule will - dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not - dnl present or too old. - AC_CHECK_PROGS([INTLBISON], [bison]) - if test -z "$INTLBISON"; then - ac_verc_fail=yes +# generated automatically by aclocal 1.15.1 -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.15' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.15.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.15.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' else - dnl Found it, now check the version. - AC_MSG_CHECKING([version of bison]) -changequote(<<,>>)dnl - ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` - case $ac_prog_version in - '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; - 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) -changequote([,])dnl - ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; - *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; - esac - AC_MSG_RESULT([$ac_prog_version]) - fi - if test $ac_verc_fail = yes; then - INTLBISON=: - fi -]) - - -dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) -AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) -# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# Test for the GNU C Library, version 2.1 or newer. -# From Bruno Haible. - -AC_DEFUN([jm_GLIBC21], - [ - AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, - ac_cv_gnu_library_2_1, - [AC_EGREP_CPP([Lucky GNU user], - [ -#include -#ifdef __GNU_LIBRARY__ - #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) - Lucky GNU user - #endif -#endif - ], - ac_cv_gnu_library_2_1=yes, - ac_cv_gnu_library_2_1=no) - ] - ) - AC_SUBST(GLIBC21) - GLIBC21="$ac_cv_gnu_library_2_1" - ] -) -# iconv.m4 serial AM4 (gettext-0.11.3) -dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], -[ - dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([iconv]) -]) - -AC_DEFUN([AM_ICONV_LINK], -[ - dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and - dnl those with the standalone portable GNU libiconv installed). - - dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV - dnl accordingly. - AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) - - dnl Add $INCICONV to CPPFLAGS before performing the following checks, - dnl because if the user has installed libiconv and not disabled its use - dnl via --without-libiconv-prefix, he wants to use it. The first - dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. - am_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) - - AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ - am_cv_func_iconv="no, consider installing GNU libiconv" - am_cv_lib_iconv=no - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_func_iconv=yes) - if test "$am_cv_func_iconv" != yes; then - am_save_LIBS="$LIBS" - LIBS="$LIBS $LIBICONV" - AC_TRY_LINK([#include -#include ], - [iconv_t cd = iconv_open("",""); - iconv(cd,NULL,NULL,NULL,NULL); - iconv_close(cd);], - am_cv_lib_iconv=yes - am_cv_func_iconv=yes) - LIBS="$am_save_LIBS" - fi - ]) - if test "$am_cv_func_iconv" = yes; then - AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) - fi - if test "$am_cv_lib_iconv" = yes; then - AC_MSG_CHECKING([how to link with libiconv]) - AC_MSG_RESULT([$LIBICONV]) + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 else - dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV - dnl either. - CPPFLAGS="$am_save_CPPFLAGS" - LIBICONV= - LTLIBICONV= - fi - AC_SUBST(LIBICONV) - AC_SUBST(LTLIBICONV) -]) - -AC_DEFUN([AM_ICONV], -[ - AM_ICONV_LINK - if test "$am_cv_func_iconv" = yes; then - AC_MSG_CHECKING([for iconv declaration]) - AC_CACHE_VAL(am_cv_proto_iconv, [ - AC_TRY_COMPILE([ -#include -#include -extern -#ifdef __cplusplus -"C" -#endif -#if defined(__STDC__) || defined(__cplusplus) -size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); -#else -size_t iconv(); -#endif -], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") - am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) - am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` - AC_MSG_RESULT([$]{ac_t:- - }[$]am_cv_proto_iconv) - AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, - [Define as const if the declaration of iconv() needs const.]) - fi -]) -# intdiv0.m4 serial 1 (gettext-0.11.3) -dnl Copyright (C) 2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -AC_DEFUN([gt_INTDIV0], -[ - AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_CANONICAL_HOST])dnl - - AC_CACHE_CHECK([whether integer division by zero raises SIGFPE], - gt_cv_int_divbyzero_sigfpe, - [ - AC_TRY_RUN([ -#include -#include - -static void -#ifdef __cplusplus -sigfpe_handler (int sig) -#else -sigfpe_handler (sig) int sig; -#endif -{ - /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ - exit (sig != SIGFPE); -} - -int x = 1; -int y = 0; -int z; -int nan; - -int main () -{ - signal (SIGFPE, sigfpe_handler); -/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ -#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) - signal (SIGTRAP, sigfpe_handler); -#endif -/* Linux/SPARC yields signal SIGILL. */ -#if defined (__sparc__) && defined (__linux__) - signal (SIGILL, sigfpe_handler); -#endif - - z = x / y; - nan = y / y; - exit (1); -} -], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no, - [ - # Guess based on the CPU. - case "$host_cpu" in - alpha* | i[34567]86 | m68k | s390*) - gt_cv_int_divbyzero_sigfpe="guessing yes";; - *) - gt_cv_int_divbyzero_sigfpe="guessing no";; - esac - ]) - ]) - case "$gt_cv_int_divbyzero_sigfpe" in - *yes) value=1;; - *) value=0;; + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi +dnl The trailing newline in this macro's definition is deliberate, for +dnl backward compatibility and to allow trailing 'dnl'-style comments +dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841. +]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac - AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value, - [Define if integer division by zero raises signal SIGFPE.]) -]) -# inttypes.m4 serial 1 (gettext-0.11.4) -dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Paul Eggert. - -# Define HAVE_INTTYPES_H if exists and doesn't clash with -# . - -AC_DEFUN([gt_HEADER_INTTYPES_H], -[ - AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h, - [ - AC_TRY_COMPILE( - [#include -#include ], - [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no) - ]) - if test $gt_cv_header_inttypes_h = yes; then - AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1, - [Define if exists and doesn't clash with .]) - fi -]) -# inttypes_h.m4 serial 5 (gettext-0.12) -dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Paul Eggert. - -# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists, -# doesn't clash with , and declares uintmax_t. - -AC_DEFUN([jm_AC_HEADER_INTTYPES_H], -[ - AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h, - [AC_TRY_COMPILE( - [#include -#include ], - [uintmax_t i = (uintmax_t) -1;], - jm_ac_cv_header_inttypes_h=yes, - jm_ac_cv_header_inttypes_h=no)]) - if test $jm_ac_cv_header_inttypes_h = yes; then - AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1, - [Define if exists, doesn't clash with , - and declares uintmax_t. ]) - fi -]) -# inttypes-pri.m4 serial 1 (gettext-0.11.4) -dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -# Define PRI_MACROS_BROKEN if exists and defines the PRI* -# macros to non-string values. This is the case on AIX 4.3.3. - -AC_DEFUN([gt_INTTYPES_PRI], -[ - AC_REQUIRE([gt_HEADER_INTTYPES_H]) - if test $gt_cv_header_inttypes_h = yes; then - AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken], - gt_cv_inttypes_pri_broken, - [ - AC_TRY_COMPILE([#include -#ifdef PRId32 -char *p = PRId32; -#endif -], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes) - ]) - fi - if test "$gt_cv_inttypes_pri_broken" = yes; then - AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1, - [Define if exists and defines unusable PRI* macros.]) - fi -]) -# isc-posix.m4 serial 2 (gettext-0.11.2) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. - -# This test replaces the one in autoconf. -# Currently this macro should have the same name as the autoconf macro -# because gettext's gettext.m4 (distributed in the automake package) -# still uses it. Otherwise, the use in gettext.m4 makes autoheader -# give these diagnostics: -# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX -# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX - -undefine([AC_ISC_POSIX]) - -AC_DEFUN([AC_ISC_POSIX], - [ - dnl This test replaces the obsolescent AC_ISC_POSIX kludge. - AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) - ] -) -# lcmessage.m4 serial 3 (gettext-0.11.3) -dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995. - -# Check whether LC_MESSAGES is available in . - -AC_DEFUN([AM_LC_MESSAGES], -[ - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES, 1, - [Define if your file defines LC_MESSAGES.]) - fi -]) -# lib-ld.m4 serial 2 (gettext-0.12) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl Subroutines of libtool.m4, -dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision -dnl with libtool.m4. - -dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. -AC_DEFUN([AC_LIB_PROG_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - acl_cv_prog_gnu_ld=yes -else - acl_cv_prog_gnu_ld=no -fi]) -with_gnu_ld=$acl_cv_prog_gnu_ld -]) - -dnl From libtool-1.4. Sets the variable LD. -AC_DEFUN([AC_LIB_PROG_LD], -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + install_sh="\${SHELL} $am_aux_dir/install-sh" esac - case $ac_prog in - # Accept absolute paths. - [[\\/]* | [A-Za-z]:[\\/]*)] - [re_direlt='/[^/][^/]*/\.\./'] - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; +fi +AC_SUBST([install_sh])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; + MISSING="\${SHELL} $am_aux_dir/missing" ;; esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) fi -AC_CACHE_VAL(acl_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - acl_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes else - acl_cv_path_LD="$LD" # Let the user override the test with a path. + am_cv_make_support_nested_variables=no fi]) -LD="$acl_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_LIB_PROG_LD_GNU -]) -# lib-link.m4 serial 4 (gettext-0.12) -dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and -dnl augments the CPPFLAGS variable. -AC_DEFUN([AC_LIB_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - ac_cv_lib[]Name[]_libs="$LIB[]NAME" - ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" - ac_cv_lib[]Name[]_cppflags="$INC[]NAME" - ]) - LIB[]NAME="$ac_cv_lib[]Name[]_libs" - LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" - INC[]NAME="$ac_cv_lib[]Name[]_cppflags" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the - dnl results of this search when this library appears as a dependency. - HAVE_LIB[]NAME=yes - undefine([Name]) - undefine([NAME]) -]) - -dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) -dnl searches for libname and the libraries corresponding to explicit and -dnl implicit dependencies, together with the specified include files and -dnl the ability to compile and link the specified testcode. If found, it -dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and -dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and -dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs -dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. -AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], -[ - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - AC_REQUIRE([AC_LIB_RPATH]) - define([Name],[translit([$1],[./-], [___])]) - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - - dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME - dnl accordingly. - AC_LIB_LINKFLAGS_BODY([$1], [$2]) - - dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, - dnl because if the user has installed lib[]Name and not disabled its use - dnl via --without-lib[]Name-prefix, he wants to use it. - ac_save_CPPFLAGS="$CPPFLAGS" - AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) - - AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ - ac_save_LIBS="$LIBS" - LIBS="$LIBS $LIB[]NAME" - AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) - LIBS="$ac_save_LIBS" - ]) - if test "$ac_cv_lib[]Name" = yes; then - HAVE_LIB[]NAME=yes - AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) - AC_MSG_CHECKING([how to link with lib[]$1]) - AC_MSG_RESULT([$LIB[]NAME]) - else - HAVE_LIB[]NAME=no - dnl If $LIB[]NAME didn't lead to a usable library, we don't need - dnl $INC[]NAME either. - CPPFLAGS="$ac_save_CPPFLAGS" - LIB[]NAME= - LTLIB[]NAME= - fi - AC_SUBST([HAVE_LIB]NAME) - AC_SUBST([LIB]NAME) - AC_SUBST([LTLIB]NAME) - undefine([Name]) - undefine([NAME]) -]) - -dnl Determine the platform dependent parameters needed to use rpath: -dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, -dnl hardcode_direct, hardcode_minus_L. -AC_DEFUN([AC_LIB_RPATH], -[ - AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS - AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld - AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host - AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir - AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ - CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ - ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh - . ./conftest.sh - rm -f ./conftest.sh - acl_cv_rpath=done - ]) - wl="$acl_cv_wl" - libext="$acl_cv_libext" - shlibext="$acl_cv_shlibext" - hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" - hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" - hardcode_direct="$acl_cv_hardcode_direct" - hardcode_minus_L="$acl_cv_hardcode_minus_L" - dnl Determine whether the user wants rpath handling at all. - AC_ARG_ENABLE(rpath, - [ --disable-rpath do not hardcode runtime library paths], - :, enable_rpath=yes) -]) - -dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and -dnl the libraries corresponding to explicit and implicit dependencies. -dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. -AC_DEFUN([AC_LIB_LINKFLAGS_BODY], -[ - define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], - [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib$1-prefix], -[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib - --without-lib$1-prefix don't search for lib$1 in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2017 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - dnl Search the library and its dependencies in $additional_libdir and - dnl $LDFLAGS. Using breadth-first-seach. - LIB[]NAME= - LTLIB[]NAME= - INC[]NAME= - rpathdirs= - ltrpathdirs= - names_already_handled= - names_next_round='$1 $2' - while test -n "$names_next_round"; do - names_this_round="$names_next_round" - names_next_round= - for name in $names_this_round; do - already_handled= - for n in $names_already_handled; do - if test "$n" = "$name"; then - already_handled=yes - break - fi - done - if test -z "$already_handled"; then - names_already_handled="$names_already_handled $name" - dnl See if it was already located by an earlier AC_LIB_LINKFLAGS - dnl or AC_LIB_HAVE_LINKFLAGS call. - uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` - eval value=\"\$HAVE_LIB$uppername\" - if test -n "$value"; then - if test "$value" = yes; then - eval value=\"\$LIB$uppername\" - test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" - eval value=\"\$LTLIB$uppername\" - test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" - else - dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined - dnl that this library doesn't exist. So just drop it. - : - fi - else - dnl Search the library lib$name in $additional_libdir and $LDFLAGS - dnl and the already constructed $LIBNAME/$LTLIBNAME. - found_dir= - found_la= - found_so= - found_a= - if test $use_additional = yes; then - if test "X$prefer_shared" = "Xyes" && test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then - found_dir="$additional_libdir" - found_so="$additional_libdir/lib$name.$shlibext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - else - if test -f "$additional_libdir/lib$name.$libext"; then - found_dir="$additional_libdir" - found_a="$additional_libdir/lib$name.$libext" - if test -f "$additional_libdir/lib$name.la"; then - found_la="$additional_libdir/lib$name.la" - fi - fi - fi - fi - if test "X$found_dir" = "X"; then - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - case "$x" in - -L*) - dir=`echo "X$x" | sed -e 's/^X-L//'` - if test "X$prefer_shared" = "Xyes" && test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then - found_dir="$dir" - found_so="$dir/lib$name.$shlibext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - else - if test -f "$dir/lib$name.$libext"; then - found_dir="$dir" - found_a="$dir/lib$name.$libext" - if test -f "$dir/lib$name.la"; then - found_la="$dir/lib$name.la" - fi - fi - fi - ;; - esac - if test "X$found_dir" != "X"; then - break - fi - done - fi - if test "X$found_dir" != "X"; then - dnl Found the library. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" - if test "X$found_so" != "X"; then - dnl Linking with a shared library. We attempt to hardcode its - dnl directory into the executable's runpath, unless it's the - dnl standard /usr/lib. - if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then - dnl No hardcoding is needed. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $found_dir" - fi - dnl The hardcoding into $LIBNAME is system dependent. - if test "$hardcode_direct" = yes; then - dnl Using DIR/libNAME.so during linking hardcodes DIR into the - dnl resulting binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then - dnl Use an explicit option to hardcode DIR into the resulting - dnl binary. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $found_dir" - fi - else - dnl Rely on "-L$found_dir". - dnl But don't add it if it's already contained in the LDFLAGS - dnl or the already constructed $LIBNAME - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$found_dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" - fi - if test "$hardcode_minus_L" != no; then - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" - else - dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH - dnl here, because this doesn't fit in flags passed to the - dnl compiler. So give up. No hardcoding. This affects only - dnl very old systems. - dnl FIXME: Not sure whether we should use - dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" - dnl here. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - fi - fi - fi - fi - else - if test "X$found_a" != "X"; then - dnl Linking with a static library. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" - else - dnl We shouldn't come here, but anyway it's good to have a - dnl fallback. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" - fi - fi - dnl Assume the include files are nearby. - additional_includedir= - case "$found_dir" in - */lib | */lib/) - basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` - additional_includedir="$basedir/include" - ;; - esac - if test "X$additional_includedir" != "X"; then - dnl Potentially add $additional_includedir to $INCNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's /usr/local/include and we are using GCC on Linux, - dnl 3. if it's already present in $CPPFLAGS or the already - dnl constructed $INCNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - for x in $CPPFLAGS $INC[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $INCNAME. - INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" - fi - fi - fi - fi - fi - dnl Look for dependencies. - if test -n "$found_la"; then - dnl Read the .la file. It defines the variables - dnl dlname, library_names, old_library, dependency_libs, current, - dnl age, revision, installed, dlopen, dlpreopen, libdir. - save_libdir="$libdir" - case "$found_la" in - */* | *\\*) . "$found_la" ;; - *) . "./$found_la" ;; - esac - libdir="$save_libdir" - dnl We use only dependency_libs. - for dep in $dependency_libs; do - case "$dep" in - -L*) - additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` - dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's /usr/local/lib and we are using GCC on Linux, - dnl 3. if it's already present in $LDFLAGS or the already - dnl constructed $LIBNAME, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - haveit= - for x in $LDFLAGS $LIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LIBNAME. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" - fi - fi - haveit= - for x in $LDFLAGS $LTLIB[]NAME; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LTLIBNAME. - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" - fi - fi - fi - fi - ;; - -R*) - dir=`echo "X$dep" | sed -e 's/^X-R//'` - if test "$enable_rpath" != no; then - dnl Potentially add DIR to rpathdirs. - dnl The rpathdirs will be appended to $LIBNAME at the end. - haveit= - for x in $rpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - rpathdirs="$rpathdirs $dir" - fi - dnl Potentially add DIR to ltrpathdirs. - dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. - haveit= - for x in $ltrpathdirs; do - if test "X$x" = "X$dir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - ltrpathdirs="$ltrpathdirs $dir" - fi - fi - ;; - -l*) - dnl Handle this in the next round. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` - ;; - *.la) - dnl Handle this in the next round. Throw away the .la's - dnl directory; it is already contained in a preceding -L - dnl option. - names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` - ;; - *) - dnl Most likely an immediate library name. - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" - ;; - esac - done - fi - else - dnl Didn't find the library; assume it is in the system directories - dnl known to the linker and runtime loader. (All the system - dnl directories known to the linker should also be known to the - dnl runtime loader, otherwise the system is severely misconfigured.) - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" - fi - fi - fi - done - done - if test "X$rpathdirs" != "X"; then - if test -n "$hardcode_libdir_separator"; then - dnl Weird platform: only the last -rpath option counts, the user must - dnl pass all path elements in one option. We can arrange that for a - dnl single library, but not when more than one $LIBNAMEs are used. - alldirs= - for found_dir in $rpathdirs; do - alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" - done - dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. - acl_save_libdir="$libdir" - libdir="$alldirs" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - else - dnl The -rpath options are cumulative. - for found_dir in $rpathdirs; do - acl_save_libdir="$libdir" - libdir="$found_dir" - eval flag=\"$hardcode_libdir_flag_spec\" - libdir="$acl_save_libdir" - LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" - done - fi - fi - if test "X$ltrpathdirs" != "X"; then - dnl When using libtool, the option that works for both libraries and - dnl executables is -R. The -R options are cumulative. - for found_dir in $ltrpathdirs; do - LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" - done - fi -]) - -dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, -dnl unless already present in VAR. -dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes -dnl contains two or three consecutive elements that belong together. -AC_DEFUN([AC_LIB_APPENDTOVAR], -[ - for element in [$2]; do - haveit= - for x in $[$1]; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X$element"; then - haveit=yes - break + AC_MSG_RESULT([no]) + _am_tools=none fi - done - if test -z "$haveit"; then - [$1]="${[$1]}${[$1]:+ }$element" - fi - done -]) -# lib-prefix.m4 serial 2 (gettext-0.12) -dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Bruno Haible. - -dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and -dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't -dnl require excessive bracketing. -ifdef([AC_HELP_STRING], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], -[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) - -dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed -dnl to access previously installed libraries. The basic assumption is that -dnl a user will want packages to use other packages he previously installed -dnl with the same --prefix option. -dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate -dnl libraries, but is otherwise very convenient. -AC_DEFUN([AC_LIB_PREFIX], -[ - AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) - AC_REQUIRE([AC_PROG_CC]) - AC_REQUIRE([AC_CANONICAL_HOST]) - AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) - dnl By default, look in $includedir and $libdir. - use_additional=yes - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) - AC_LIB_ARG_WITH([lib-prefix], -[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib - --without-lib-prefix don't search for libraries in includedir and libdir], -[ - if test "X$withval" = "Xno"; then - use_additional=no - else - if test "X$withval" = "X"; then - AC_LIB_WITH_FINAL_PREFIX([ - eval additional_includedir=\"$includedir\" - eval additional_libdir=\"$libdir\" - ]) + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) else - additional_includedir="$withval/include" - additional_libdir="$withval/lib" - fi - fi -]) - if test $use_additional = yes; then - dnl Potentially add $additional_includedir to $CPPFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/include, - dnl 2. if it's already present in $CPPFLAGS, - dnl 3. if it's /usr/local/include and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_includedir" != "X/usr/include"; then - haveit= - for x in $CPPFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-I$additional_includedir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_includedir" = "X/usr/local/include"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_includedir"; then - dnl Really add $additional_includedir to $CPPFLAGS. - CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" - fi - fi - fi - fi - dnl Potentially add $additional_libdir to $LDFLAGS. - dnl But don't add it - dnl 1. if it's the standard /usr/lib, - dnl 2. if it's already present in $LDFLAGS, - dnl 3. if it's /usr/local/lib and we are using GCC on Linux, - dnl 4. if it doesn't exist as a directory. - if test "X$additional_libdir" != "X/usr/lib"; then - haveit= - for x in $LDFLAGS; do - AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) - if test "X$x" = "X-L$additional_libdir"; then - haveit=yes - break - fi - done - if test -z "$haveit"; then - if test "X$additional_libdir" = "X/usr/local/lib"; then - if test -n "$GCC"; then - case $host_os in - linux*) haveit=yes;; - esac - fi - fi - if test -z "$haveit"; then - if test -d "$additional_libdir"; then - dnl Really add $additional_libdir to $LDFLAGS. - LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" - fi - fi - fi - fi - fi -]) - -dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, -dnl acl_final_exec_prefix, containing the values to which $prefix and -dnl $exec_prefix will expand at the end of the configure script. -AC_DEFUN([AC_LIB_PREPARE_PREFIX], -[ - dnl Unfortunately, prefix and exec_prefix get only finally determined - dnl at the end of configure. - if test "X$prefix" = "XNONE"; then - acl_final_prefix="$ac_default_prefix" - else - acl_final_prefix="$prefix" - fi - if test "X$exec_prefix" = "XNONE"; then - acl_final_exec_prefix='${prefix}' - else - acl_final_exec_prefix="$exec_prefix" - fi - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" - prefix="$acl_save_prefix" -]) - -dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the -dnl variables prefix and exec_prefix bound to the values they will have -dnl at the end of the configure script. -AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], -[ - acl_save_prefix="$prefix" - prefix="$acl_final_prefix" - acl_save_exec_prefix="$exec_prefix" - exec_prefix="$acl_final_exec_prefix" - $1 - exec_prefix="$acl_save_exec_prefix" - prefix="$acl_save_prefix" -]) -# nls.m4 serial 1 (gettext-0.12) -dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -AC_DEFUN([AM_NLS], -[ - AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE(nls, - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT($USE_NLS) - AC_SUBST(USE_NLS) -]) - -AC_DEFUN([AM_MKINSTALLDIRS], -[ - dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly - dnl find the mkinstalldirs script in another subdir but $(top_srcdir). - dnl Try to locate it. - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - case "$ac_aux_dir" in - /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; - *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; - esac - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - AC_SUBST(MKINSTALLDIRS) -]) -# po.m4 serial 1 (gettext-0.12) -dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1995-2000. -dnl Bruno Haible , 2000-2003. - -dnl Checks for all prerequisites of the po subdirectory. -AC_DEFUN([AM_PO_SUBDIRS], -[ - AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_INSTALL])dnl - AC_REQUIRE([AM_MKINSTALLDIRS])dnl - AC_REQUIRE([AM_NLS])dnl + AC_MSG_RESULT([no]) + _am_tools=none + fi], - dnl Perform the following tests also if --disable-nls has been given, - dnl because they are needed for "make dist" to work. + [pax], + [], - dnl Search for GNU msgfmt in the PATH. - dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. - dnl The second test excludes FreeBSD msgfmt. - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && - (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + [m4_fatal([Unknown tar format])]) - dnl Search for GNU xgettext 0.12 or newer in the PATH. - dnl The first test excludes Solaris xgettext and early GNU xgettext versions. - dnl The second test excludes FreeBSD xgettext. - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && - (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], - :) - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - - dnl Search for GNU msgmerge 0.11 or newer in the PATH. - AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, - [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) - - dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. - dnl Test whether we really found GNU msgfmt. - if test "$GMSGFMT" != ":"; then - dnl If it is no GNU msgfmt we define it as : so that the - dnl Makefiles still can work. - if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && - (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - : ; - else - GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` - AC_MSG_RESULT( - [found $GMSGFMT program is not GNU msgfmt; ignore it]) - GMSGFMT=":" - fi - fi - - dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && - (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then - : ; - else - AC_MSG_RESULT( - [found xgettext program is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - dnl Remove leftover from FreeBSD xgettext call. - rm -f messages.po - fi - - AC_OUTPUT_COMMANDS([ - for ac_file in $CONFIG_FILES; do - # Support "outfile[:infile[:infile...]]" - case "$ac_file" in - *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - esac - # PO directories have a Makefile.in generated from Makefile.in.in. - case "$ac_file" in */Makefile.in) - # Adjust a relative srcdir. - ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` - ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" - ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` - # In autoconf-2.13 it is called $ac_given_srcdir. - # In autoconf-2.50 it is called $srcdir. - test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" - case "$ac_given_srcdir" in - .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; - /*) top_srcdir="$ac_given_srcdir" ;; - *) top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then - rm -f "$ac_dir/POTFILES" - test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" - cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" - POMAKEFILEDEPS="POTFILES.in" - # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend - # on $ac_dir but don't depend on user-specified configuration - # parameters. - if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then - # The LINGUAS file contains the set of available languages. - if test -n "$OBSOLETE_ALL_LINGUAS"; then - test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" - fi - ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` - # Hide the ALL_LINGUAS assigment from automake. - eval 'ALL_LINGUAS''=$ALL_LINGUAS_' - POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" - else - # The set of available languages was given in configure.in. - eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' - fi - case "$ac_given_srcdir" in - .) srcdirpre= ;; - *) srcdirpre='$(srcdir)/' ;; - esac - POFILES= - GMOFILES= - UPDATEPOFILES= - DUMMYPOFILES= - for lang in $ALL_LINGUAS; do - POFILES="$POFILES $srcdirpre$lang.po" - GMOFILES="$GMOFILES $srcdirpre$lang.gmo" - UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" - DUMMYPOFILES="$DUMMYPOFILES $lang.nop" - done - # CATALOGS depends on both $ac_dir and the user's LINGUAS - # environment variable. - INST_LINGUAS= - if test -n "$ALL_LINGUAS"; then - for presentlang in $ALL_LINGUAS; do - useit=no - if test "%UNSET%" != "$LINGUAS"; then - desiredlanguages="$LINGUAS" - else - desiredlanguages="$ALL_LINGUAS" - fi - for desiredlang in $desiredlanguages; do - # Use the presentlang catalog if desiredlang is - # a. equal to presentlang, or - # b. a variant of presentlang (because in this case, - # presentlang can be used as a fallback for messages - # which are not translated in the desiredlang catalog). - case "$desiredlang" in - "$presentlang"*) useit=yes;; - esac - done - if test $useit = yes; then - INST_LINGUAS="$INST_LINGUAS $presentlang" - fi - done - fi - CATALOGS= - if test -n "$INST_LINGUAS"; then - for lang in $INST_LINGUAS; do - CATALOGS="$CATALOGS $lang.gmo" - done - fi - test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" - sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" - for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do - if test -f "$f"; then - case "$f" in - *.orig | *.bak | *~) ;; - *) cat "$f" >> "$ac_dir/Makefile" ;; - esac - fi - done - fi - ;; - esac - done], - [# Capture the value of obsolete ALL_LINGUAS because we need it to compute - # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it - # from automake. - eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' - # Capture the value of LINGUAS because we need it to compute CATALOGS. - LINGUAS="${LINGUAS-%UNSET%}" - ]) -]) -# progtest.m4 serial 3 (gettext-0.12) -dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. -dnl -dnl This file can can be used in projects which are not available under -dnl the GNU General Public License or the GNU Library General Public -dnl License but which still want to provide support for the GNU gettext -dnl functionality. -dnl Please note that the actual code of the GNU gettext library is covered -dnl by the GNU Library General Public License, and the rest of the GNU -dnl gettext package package is covered by the GNU General Public License. -dnl They are *not* in the public domain. - -dnl Authors: -dnl Ulrich Drepper , 1996. - -# Search path for a program which passes the given test. - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN([AM_PATH_PROG_WITH_TEST], -[ -# Prepare PATH_SEPARATOR. -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi + AC_MSG_CHECKING([how to create a $1 tar archive]) -# Find out how to test for executable files. Don't use a zero-byte file, -# as systems may use methods other than mode bits to determine executability. -cat >conf$$.file <<_ASEOF -#! /bin/sh -exit 0 -_ASEOF -chmod +x conf$$.file -if test -x conf$$.file >/dev/null 2>&1; then - ac_executable_p="test -x" -else - ac_executable_p="test -f" -fi -rm -f conf$$.file + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - [[\\/]]* | ?:[[\\/]]*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in ifelse([$5], , $PATH, [$5]); do - IFS="$ac_save_IFS" - test -z "$ac_dir" && ac_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" - break 2 - fi - fi + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break done - done - IFS="$ac_save_IFS" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) -# stdint_h.m4 serial 3 (gettext-0.12) -dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Paul Eggert. - -# Define HAVE_STDINT_H_WITH_UINTMAX if exists, -# doesn't clash with , and declares uintmax_t. - -AC_DEFUN([jm_AC_HEADER_STDINT_H], -[ - AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h, - [AC_TRY_COMPILE( - [#include -#include ], - [uintmax_t i = (uintmax_t) -1;], - jm_ac_cv_header_stdint_h=yes, - jm_ac_cv_header_stdint_h=no)]) - if test $jm_ac_cv_header_stdint_h = yes; then - AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1, - [Define if exists, doesn't clash with , - and declares uintmax_t. ]) - fi -]) -# uintmax_t.m4 serial 7 (gettext-0.12) -dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Paul Eggert. - -AC_PREREQ(2.13) - -# Define uintmax_t to 'unsigned long' or 'unsigned long long' -# if it is not already defined in or . - -AC_DEFUN([jm_AC_TYPE_UINTMAX_T], -[ - AC_REQUIRE([jm_AC_HEADER_INTTYPES_H]) - AC_REQUIRE([jm_AC_HEADER_STDINT_H]) - if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then - AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG]) - test $ac_cv_type_unsigned_long_long = yes \ - && ac_type='unsigned long long' \ - || ac_type='unsigned long' - AC_DEFINE_UNQUOTED(uintmax_t, $ac_type, - [Define to unsigned long or unsigned long long - if and don't define.]) - else - AC_DEFINE(HAVE_UINTMAX_T, 1, - [Define if you have the 'uintmax_t' type in or .]) - fi -]) -# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40) -dnl Copyright (C) 1999-2002 Free Software Foundation, Inc. -dnl This file is free software, distributed under the terms of the GNU -dnl General Public License. As a special exception to the GNU General -dnl Public License, this file may be distributed as part of a program -dnl that contains a configuration script generated by Autoconf, under -dnl the same distribution terms as the rest of that program. - -dnl From Paul Eggert. - -AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG], -[ - AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long, - [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;], - [unsigned long long ullmax = (unsigned long long) -1; - return ull << i | ull >> i | ullmax / ull | ullmax % ull;], - ac_cv_type_unsigned_long_long=yes, - ac_cv_type_unsigned_long_long=no)]) - if test $ac_cv_type_unsigned_long_long = yes; then - AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1, - [Define if you have the unsigned long long type.]) - fi -]) - -dnl From gnulib -AC_DEFUN([BASH_FUNC_FPURGE], -[ - AC_CHECK_FUNCS_ONCE([fpurge]) - AC_CHECK_FUNCS_ONCE([__fpurge]) - AC_CHECK_DECLS([fpurge], , , [#include ]) -]) - -AC_DEFUN([BASH_FUNC_SNPRINTF], -[ - AC_CHECK_FUNCS_ONCE([snprintf]) - if test X$ac_cv_func_snprintf = Xyes; then - AC_CACHE_CHECK([for standard-conformant snprintf], [bash_cv_func_snprintf], - [AC_TRY_RUN([ -#include - -main() -{ - int n; - n = snprintf (0, 0, "%s", "0123456"); - exit(n != 7); -} -], bash_cv_func_snprintf=yes, bash_cv_func_snprintf=no, - [AC_MSG_WARN([cannot check standard snprintf if cross-compiling]) - bash_cv_func_snprintf=yes] -)]) - if test $bash_cv_func_snprintf = no; then - ac_cv_func_snprintf=no - fi - fi - if test $ac_cv_func_snprintf = no; then - AC_DEFINE(HAVE_SNPRINTF, 0, - [Define if you have a standard-conformant snprintf function.]) - fi -]) - -AC_DEFUN([BASH_FUNC_VSNPRINTF], -[ - AC_CHECK_FUNCS_ONCE([vsnprintf]) - if test X$ac_cv_func_vsnprintf = Xyes; then - AC_CACHE_CHECK([for standard-conformant vsnprintf], [bash_cv_func_vsnprintf], - [AC_TRY_RUN([ -#if HAVE_STDARG_H -#include -#else -#include -#endif -#include -#include - -static int -#if HAVE_STDARG_H -foo(const char *fmt, ...) -#else -foo(format, va_alist) - const char *format; - va_dcl -#endif -{ - va_list args; - int n; - -#if HAVE_STDARG_H - va_start(args, fmt); -#else - va_start(args); -#endif - n = vsnprintf(0, 0, fmt, args); - va_end (args); - return n; -} - -main() -{ - int n; - n = foo("%s", "0123456"); - exit(n != 7); -} -], bash_cv_func_vsnprintf=yes, bash_cv_func_vsnprintf=no, - [AC_MSG_WARN([cannot check standard vsnprintf if cross-compiling]) - bash_cv_func_vsnprintf=yes] -)]) - if test $bash_cv_func_vsnprintf = no; then - ac_cv_func_vsnprintf=no - fi - fi - if test $ac_cv_func_vsnprintf = no; then - AC_DEFINE(HAVE_VSNPRINTF, 0, - [Define if you have a standard-conformant vsnprintf function.]) - fi -]) - -AC_DEFUN(BASH_STRUCT_WEXITSTATUS_OFFSET, -[AC_MSG_CHECKING(for offset of exit status in return status from wait) -AC_CACHE_VAL(bash_cv_wexitstatus_offset, -[AC_TRY_RUN([ -#include -#include - -#include - -main(c, v) - int c; - char **v; -{ - pid_t pid, p; - int s, i, n; - - s = 0; - pid = fork(); - if (pid == 0) - exit (42); - - /* wait for the process */ - p = wait(&s); - if (p != pid) - exit (255); - - /* crack s */ - for (i = 0; i < (sizeof(s) - 8); i++) - { - n = (s >> i) & 0xff; - if (n == 42) - exit (i); - } - - exit (254); -} -], bash_cv_wexitstatus_offset=0, bash_cv_wexitstatus_offset=$?, - [AC_MSG_WARN(cannot check WEXITSTATUS offset if cross compiling -- defaulting to 0) - bash_cv_wexitstatus_offset=0] -)]) -if test "$bash_cv_wexitstatus_offset" -gt 32 ; then - AC_MSG_WARN(bad exit status from test program -- defaulting to 0) - bash_cv_wexitstatus_offset=0 -fi -AC_MSG_RESULT($bash_cv_wexitstatus_offset) -AC_DEFINE_UNQUOTED([WEXITSTATUS_OFFSET], [$bash_cv_wexitstatus_offset], [Offset of exit status in wait status word]) -]) - -AC_DEFUN([BASH_FUNC_SBRK], -[ - AC_CHECK_FUNCS_ONCE([sbrk]) - if test X$ac_cv_func_sbrk = Xyes; then - AC_CACHE_CHECK([for working sbrk], [bash_cv_func_sbrk], - [AC_TRY_RUN([ -#include -#include - -int -main(int c, char **v) -{ - void *x; + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac - x = sbrk (4096); - exit ((x == (void *)-1) ? 1 : 0); -} -], bash_cv_func_sbrk=yes, bash_cv_func_snprintf=sbrk, - [AC_MSG_WARN([cannot check working sbrk if cross-compiling]) - bash_cv_func_sbrk=yes] -)]) - if test $bash_cv_func_sbrk = no; then - ac_cv_func_sbrk=no + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi - fi - if test $ac_cv_func_sbrk = no; then - AC_DEFINE(HAVE_SBRK, 0, - [Define if you have a working sbrk function.]) - fi -]) - -AC_DEFUN(BASH_FUNC_FNMATCH_EQUIV_FALLBACK, -[AC_MSG_CHECKING(whether fnmatch can be used to check bracket equivalence classes) -AC_CACHE_VAL(bash_cv_fnmatch_equiv_fallback, -[AC_TRY_RUN([ -#include -#include -#include -#include -#include - -char *pattern = "[[=a=]]"; + done + rm -rf conftest.dir -/* char *string = "ä"; */ -unsigned char string[4] = { '\xc3', '\xa4', '\0' }; + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -int -main (int c, char **v) -{ - setlocale (LC_ALL, "de_DE.UTF-8"); - if (fnmatch (pattern, (const char *)string, 0) != FNM_NOMATCH) - exit (0); - exit (1); -} +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR -], bash_cv_fnmatch_equiv_fallback=yes, bash_cv_fnmatch_equiv_fallback=no, - [AC_MSG_WARN(cannot check fnmatch if cross compiling -- defaulting to no) - bash_cv_fnmatch_equiv_fallback=no] -)]) -AC_MSG_RESULT($bash_cv_fnmatch_equiv_fallback) -if test "$bash_cv_fnmatch_equiv_fallback" = "yes" ; then - bash_cv_fnmatch_equiv_value=1 -else - bash_cv_fnmatch_equiv_value=0 -fi -AC_DEFINE_UNQUOTED([FNMATCH_EQUIV_FALLBACK], [$bash_cv_fnmatch_equiv_value], [Whether fnmatch can be used for bracket equivalence classes]) -]) +m4_include([../config/lead-dot.m4]) +m4_include([../config/override.m4]) diff --git a/readline/ansi_stdlib.h b/readline/ansi_stdlib.h deleted file mode 100644 index 7dc2ee0cf4..0000000000 --- a/readline/ansi_stdlib.h +++ /dev/null @@ -1,54 +0,0 @@ -/* ansi_stdlib.h -- An ANSI Standard stdlib.h. */ -/* A minimal stdlib.h containing extern declarations for those functions - that bash uses. */ - -/* Copyright (C) 1993 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Bash is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Bash. If not, see . -*/ - -#if !defined (_STDLIB_H_) -#define _STDLIB_H_ 1 - -/* String conversion functions. */ -extern int atoi (); - -extern double atof (); -extern double strtod (); - -/* Memory allocation functions. */ -/* Generic pointer type. */ -#ifndef PTR_T - -#if defined (__STDC__) -# define PTR_T void * -#else -# define PTR_T char * -#endif - -#endif /* PTR_T */ - -extern PTR_T malloc (); -extern PTR_T realloc (); -extern void free (); - -/* Other miscellaneous functions. */ -extern void abort (); -extern void exit (); -extern char *getenv (); -extern void qsort (); - -#endif /* _STDLIB_H */ diff --git a/readline/bind.c b/readline/bind.c deleted file mode 100644 index 57ae10f731..0000000000 --- a/readline/bind.c +++ /dev/null @@ -1,2920 +0,0 @@ -/* bind.c -- key binding and startup file support for the readline library. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (__TANDEM) -# include -#endif - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include -#if defined (HAVE_SYS_FILE_H) -# include -#endif /* HAVE_SYS_FILE_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -#include "posixstat.h" - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -#if !defined (strchr) && !defined (__STDC__) -extern char *strchr (), *strrchr (); -#endif /* !strchr && !__STDC__ */ - -/* Variables exported by this file. */ -Keymap rl_binding_keymap; - -static int _rl_skip_to_delim PARAMS((char *, int, int)); - -#if defined (USE_VARARGS) && defined (PREFER_STDARG) -static void _rl_init_file_error (const char *, ...) __attribute__((__format__ (printf, 1, 2))); -#else -static void _rl_init_file_error (); -#endif - -static rl_command_func_t *_rl_function_of_keyseq_internal PARAMS((const char *, size_t, Keymap, int *)); - -static char *_rl_read_file PARAMS((char *, size_t *)); -static int _rl_read_init_file PARAMS((const char *, int)); -static int glean_key_from_name PARAMS((char *)); - -static int find_boolean_var PARAMS((const char *)); -static int find_string_var PARAMS((const char *)); - -static const char *boolean_varname PARAMS((int)); -static const char *string_varname PARAMS((int)); - -static char *_rl_get_string_variable_value PARAMS((const char *)); -static int substring_member_of_array PARAMS((const char *, const char * const *)); - -static int _rl_get_keymap_by_name PARAMS((const char *)); -static int _rl_get_keymap_by_map PARAMS((Keymap)); - -static int currently_reading_init_file; - -/* used only in this file */ -static int _rl_prefer_visible_bell = 1; - -#define OP_EQ 1 -#define OP_NE 2 -#define OP_GT 3 -#define OP_GE 4 -#define OP_LT 5 -#define OP_LE 6 - -#define OPSTART(c) ((c) == '=' || (c) == '!' || (c) == '<' || (c) == '>') -#define CMPSTART(c) ((c) == '=' || (c) == '!') - -/* **************************************************************** */ -/* */ -/* Binding keys */ -/* */ -/* **************************************************************** */ - -/* rl_add_defun (char *name, rl_command_func_t *function, int key) - Add NAME to the list of named functions. Make FUNCTION be the function - that gets called. If KEY is not -1, then bind it. */ -int -rl_add_defun (const char *name, rl_command_func_t *function, int key) -{ - if (key != -1) - rl_bind_key (key, function); - rl_add_funmap_entry (name, function); - return 0; -} - -/* Bind KEY to FUNCTION. Returns non-zero if KEY is out of range. */ -int -rl_bind_key (int key, rl_command_func_t *function) -{ - char keyseq[3]; - int l; - - if (key < 0) - return (key); - - if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) - { - if (_rl_keymap[ESC].type == ISKMAP) - { - Keymap escmap; - - escmap = FUNCTION_TO_KEYMAP (_rl_keymap, ESC); - key = UNMETA (key); - escmap[key].type = ISFUNC; - escmap[key].function = function; - return (0); - } - return (key); - } - - /* If it's bound to a function or macro, just overwrite. Otherwise we have - to treat it as a key sequence so rl_generic_bind handles shadow keymaps - for us. If we are binding '\' make sure to escape it so it makes it - through the call to rl_translate_keyseq. */ - if (_rl_keymap[key].type != ISKMAP) - { - _rl_keymap[key].type = ISFUNC; - _rl_keymap[key].function = function; - } - else - { - l = 0; - if (key == '\\') - keyseq[l++] = '\\'; - keyseq[l++] = key; - keyseq[l] = '\0'; - rl_bind_keyseq (keyseq, function); - } - rl_binding_keymap = _rl_keymap; - return (0); -} - -/* Bind KEY to FUNCTION in MAP. Returns non-zero in case of invalid - KEY. */ -int -rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map) -{ - int result; - Keymap oldmap; - - oldmap = _rl_keymap; - _rl_keymap = map; - result = rl_bind_key (key, function); - _rl_keymap = oldmap; - return (result); -} - -/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. Right - now, this is always used to attempt to bind the arrow keys. */ -int -rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *default_func, Keymap kmap) -{ - char *keyseq; - - keyseq = rl_untranslate_keyseq ((unsigned char)key); - return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, kmap)); -} - -int -rl_bind_key_if_unbound (int key, rl_command_func_t *default_func) -{ - char *keyseq; - - keyseq = rl_untranslate_keyseq ((unsigned char)key); - return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap)); -} - -/* Make KEY do nothing in the currently selected keymap. - Returns non-zero in case of error. This is not the same as self-insert; - this makes it a dead key. */ -int -rl_unbind_key (int key) -{ - return (rl_bind_key (key, (rl_command_func_t *)NULL)); -} - -/* Make KEY do nothing in MAP. Returns non-zero in case of error. */ -int -rl_unbind_key_in_map (int key, Keymap map) -{ - return (rl_bind_key_in_map (key, (rl_command_func_t *)NULL, map)); -} - -/* Unbind all keys bound to FUNCTION in MAP. */ -int -rl_unbind_function_in_map (rl_command_func_t *func, Keymap map) -{ - register int i, rval; - - for (i = rval = 0; i < KEYMAP_SIZE; i++) - { - if (map[i].type == ISFUNC && map[i].function == func) - { - map[i].function = (rl_command_func_t *)NULL; - rval = 1; - } - } - return rval; -} - -/* Unbind all keys bound to COMMAND, which is a bindable command name, in MAP */ -int -rl_unbind_command_in_map (const char *command, Keymap map) -{ - rl_command_func_t *func; - - func = rl_named_function (command); - if (func == 0) - return 0; - return (rl_unbind_function_in_map (func, map)); -} - -/* Bind the key sequence represented by the string KEYSEQ to - FUNCTION, starting in the current keymap. This makes new - keymaps as necessary. */ -int -rl_bind_keyseq (const char *keyseq, rl_command_func_t *function) -{ - return (rl_generic_bind (ISFUNC, keyseq, (char *)function, _rl_keymap)); -} - -/* Bind the key sequence represented by the string KEYSEQ to - FUNCTION. This makes new keymaps as necessary. The initial - place to do bindings is in MAP. */ -int -rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) -{ - return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map)); -} - -/* Backwards compatibility; equivalent to rl_bind_keyseq_in_map() */ -int -rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map) -{ - return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map)); -} - -/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. Right - now, this is always used to attempt to bind the arrow keys, hence the - check for rl_vi_movement_mode. */ -int -rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *default_func, Keymap kmap) -{ - rl_command_func_t *func; - char *keys; - int keys_len; - - if (keyseq) - { - /* Handle key sequences that require translations and `raw' ones that - don't. This might be a problem with backslashes. */ - keys = (char *)xmalloc (1 + (2 * strlen (keyseq))); - if (rl_translate_keyseq (keyseq, keys, &keys_len)) - { - xfree (keys); - return -1; - } - func = rl_function_of_keyseq_len (keys, keys_len, kmap, (int *)NULL); - xfree (keys); -#if defined (VI_MODE) - if (!func || func == rl_do_lowercase_version || func == rl_vi_movement_mode) -#else - if (!func || func == rl_do_lowercase_version) -#endif - return (rl_bind_keyseq_in_map (keyseq, default_func, kmap)); - else - return 1; - } - return 0; -} - -int -rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *default_func) -{ - return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap)); -} - -/* Bind the key sequence represented by the string KEYSEQ to - the string of characters MACRO. This makes new keymaps as - necessary. The initial place to do bindings is in MAP. */ -int -rl_macro_bind (const char *keyseq, const char *macro, Keymap map) -{ - char *macro_keys; - int macro_keys_len; - - macro_keys = (char *)xmalloc ((2 * strlen (macro)) + 1); - - if (rl_translate_keyseq (macro, macro_keys, ¯o_keys_len)) - { - xfree (macro_keys); - return -1; - } - rl_generic_bind (ISMACR, keyseq, macro_keys, map); - return 0; -} - -/* Bind the key sequence represented by the string KEYSEQ to - the arbitrary pointer DATA. TYPE says what kind of data is - pointed to by DATA, right now this can be a function (ISFUNC), - a macro (ISMACR), or a keymap (ISKMAP). This makes new keymaps - as necessary. The initial place to do bindings is in MAP. */ -int -rl_generic_bind (int type, const char *keyseq, char *data, Keymap map) -{ - char *keys; - int keys_len, prevkey; - register int i; - KEYMAP_ENTRY k; - Keymap prevmap; - - k.function = 0; - - /* If no keys to bind to, exit right away. */ - if (keyseq == 0 || *keyseq == 0) - { - if (type == ISMACR) - xfree (data); - return -1; - } - - keys = (char *)xmalloc (1 + (2 * strlen (keyseq))); - - /* Translate the ASCII representation of KEYSEQ into an array of - characters. Stuff the characters into KEYS, and the length of - KEYS into KEYS_LEN. */ - if (rl_translate_keyseq (keyseq, keys, &keys_len)) - { - xfree (keys); - return -1; - } - - prevmap = map; - prevkey = keys[0]; - - /* Bind keys, making new keymaps as necessary. */ - for (i = 0; i < keys_len; i++) - { - unsigned char uc = keys[i]; - int ic; - - if (i > 0) - prevkey = ic; - - ic = uc; - if (ic < 0 || ic >= KEYMAP_SIZE) - { - xfree (keys); - return -1; - } - - if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii) - { - ic = UNMETA (ic); - if (map[ESC].type == ISKMAP) - { - prevmap = map; - map = FUNCTION_TO_KEYMAP (map, ESC); - } - } - - if ((i + 1) < keys_len) - { - if (map[ic].type != ISKMAP) - { - /* We allow subsequences of keys. If a keymap is being - created that will `shadow' an existing function or macro - key binding, we save that keybinding into the ANYOTHERKEY - index in the new map. The dispatch code will look there - to find the function to execute if the subsequence is not - matched. ANYOTHERKEY was chosen to be greater than - UCHAR_MAX. */ - k = map[ic]; - - map[ic].type = ISKMAP; - map[ic].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap()); - } - prevmap = map; - map = FUNCTION_TO_KEYMAP (map, ic); - /* The dispatch code will return this function if no matching - key sequence is found in the keymap. This (with a little - help from the dispatch code in readline.c) allows `a' to be - mapped to something, `abc' to be mapped to something else, - and the function bound to `a' to be executed when the user - types `abx', leaving `bx' in the input queue. */ - if (k.function && ((k.type == ISFUNC && k.function != rl_do_lowercase_version) || k.type == ISMACR)) - { - map[ANYOTHERKEY] = k; - k.function = 0; - } - } - else - { - if (map[ic].type == ISMACR) - xfree ((char *)map[ic].function); - else if (map[ic].type == ISKMAP) - { - prevmap = map; - map = FUNCTION_TO_KEYMAP (map, ic); - ic = ANYOTHERKEY; - /* If we're trying to override a keymap with a null function - (e.g., trying to unbind it), we can't use a null pointer - here because that's indistinguishable from having not been - overridden. We use a special bindable function that does - nothing. */ - if (type == ISFUNC && data == 0) - data = (char *)_rl_null_function; - } - - map[ic].function = KEYMAP_TO_FUNCTION (data); - map[ic].type = type; - } - - rl_binding_keymap = map; - - } - - /* If we unbound a key (type == ISFUNC, data == 0), and the prev keymap - points to the keymap where we unbound the key (sanity check), and the - current binding keymap is empty (rl_empty_keymap() returns non-zero), - and the binding keymap has ANYOTHERKEY set with type == ISFUNC - (overridden function), delete the now-empty keymap, take the previously- - overridden function and remove the override. */ - /* Right now, this only works one level back. */ - if (type == ISFUNC && data == 0 && - prevmap[prevkey].type == ISKMAP && - (FUNCTION_TO_KEYMAP(prevmap, prevkey) == rl_binding_keymap) && - rl_binding_keymap[ANYOTHERKEY].type == ISFUNC && - rl_empty_keymap (rl_binding_keymap)) - { - prevmap[prevkey].type = rl_binding_keymap[ANYOTHERKEY].type; - prevmap[prevkey].function = rl_binding_keymap[ANYOTHERKEY].function; - rl_discard_keymap (rl_binding_keymap); - rl_binding_keymap = prevmap; - } - - xfree (keys); - return 0; -} - -/* Translate the ASCII representation of SEQ, stuffing the values into ARRAY, - an array of characters. LEN gets the final length of ARRAY. Return - non-zero if there was an error parsing SEQ. */ -int -rl_translate_keyseq (const char *seq, char *array, int *len) -{ - register int i, c, l, temp; - - for (i = l = 0; c = seq[i]; i++) - { - if (c == '\\') - { - c = seq[++i]; - - if (c == 0) - { - array[l++] = '\\'; /* preserve trailing backslash */ - break; - } - - /* Handle \C- and \M- prefixes. */ - if ((c == 'C' || c == 'M') && seq[i + 1] == '-') - { - /* Handle special case of backwards define. */ - if (strncmp (&seq[i], "C-\\M-", 5) == 0) - { - array[l++] = ESC; /* ESC is meta-prefix */ - i += 5; - array[l++] = CTRL (_rl_to_upper (seq[i])); - } - else if (c == 'M') - { - i++; /* seq[i] == '-' */ - /* XXX - obey convert-meta setting */ - if (_rl_convert_meta_chars_to_ascii && _rl_keymap[ESC].type == ISKMAP) - array[l++] = ESC; /* ESC is meta-prefix */ - else if (seq[i+1] == '\\' && seq[i+2] == 'C' && seq[i+3] == '-') - { - i += 4; - temp = (seq[i] == '?') ? RUBOUT : CTRL (_rl_to_upper (seq[i])); - array[l++] = META (temp); - } - else - { - /* This doesn't yet handle things like \M-\a, which may - or may not have any reasonable meaning. You're - probably better off using straight octal or hex. */ - i++; - array[l++] = META (seq[i]); - } - } - else if (c == 'C') - { - i += 2; - /* Special hack for C-?... */ - array[l++] = (seq[i] == '?') ? RUBOUT : CTRL (_rl_to_upper (seq[i])); - } - if (seq[i] == '\0') - break; - continue; - } - - /* Translate other backslash-escaped characters. These are the - same escape sequences that bash's `echo' and `printf' builtins - handle, with the addition of \d -> RUBOUT. A backslash - preceding a character that is not special is stripped. */ - switch (c) - { - case 'a': - array[l++] = '\007'; - break; - case 'b': - array[l++] = '\b'; - break; - case 'd': - array[l++] = RUBOUT; /* readline-specific */ - break; - case 'e': - array[l++] = ESC; - break; - case 'f': - array[l++] = '\f'; - break; - case 'n': - array[l++] = NEWLINE; - break; - case 'r': - array[l++] = RETURN; - break; - case 't': - array[l++] = TAB; - break; - case 'v': - array[l++] = 0x0B; - break; - case '\\': - array[l++] = '\\'; - break; - case '0': case '1': case '2': case '3': - case '4': case '5': case '6': case '7': - i++; - for (temp = 2, c -= '0'; ISOCTAL ((unsigned char)seq[i]) && temp--; i++) - c = (c * 8) + OCTVALUE (seq[i]); - i--; /* auto-increment in for loop */ - array[l++] = c & largest_char; - break; - case 'x': - i++; - for (temp = 2, c = 0; ISXDIGIT ((unsigned char)seq[i]) && temp--; i++) - c = (c * 16) + HEXVALUE (seq[i]); - if (temp == 2) - c = 'x'; - i--; /* auto-increment in for loop */ - array[l++] = c & largest_char; - break; - default: /* backslashes before non-special chars just add the char */ - array[l++] = c; - break; /* the backslash is stripped */ - } - continue; - } - - array[l++] = c; - } - - *len = l; - array[l] = '\0'; - return (0); -} - -static int -_rl_isescape (int c) -{ - switch (c) - { - case '\007': - case '\b': - case '\f': - case '\n': - case '\r': - case TAB: - case 0x0b: return (1); - default: return (0); - } -} - -static int -_rl_escchar (int c) -{ - switch (c) - { - case '\007': return ('a'); - case '\b': return ('b'); - case '\f': return ('f'); - case '\n': return ('n'); - case '\r': return ('r'); - case TAB: return ('t'); - case 0x0b: return ('v'); - default: return (c); - } -} - -char * -rl_untranslate_keyseq (int seq) -{ - static char kseq[16]; - int i, c; - - i = 0; - c = seq; - if (META_CHAR (c)) - { - kseq[i++] = '\\'; - kseq[i++] = 'M'; - kseq[i++] = '-'; - c = UNMETA (c); - } - else if (c == ESC) - { - kseq[i++] = '\\'; - c = 'e'; - } - else if (CTRL_CHAR (c)) - { - kseq[i++] = '\\'; - kseq[i++] = 'C'; - kseq[i++] = '-'; - c = _rl_to_lower (UNCTRL (c)); - } - else if (c == RUBOUT) - { - kseq[i++] = '\\'; - kseq[i++] = 'C'; - kseq[i++] = '-'; - c = '?'; - } - - if (c == ESC) - { - kseq[i++] = '\\'; - c = 'e'; - } - else if (c == '\\' || c == '"') - { - kseq[i++] = '\\'; - } - - kseq[i++] = (unsigned char) c; - kseq[i] = '\0'; - return kseq; -} - -char * -_rl_untranslate_macro_value (char *seq, int use_escapes) -{ - char *ret, *r, *s; - int c; - - r = ret = (char *)xmalloc (7 * strlen (seq) + 1); - for (s = seq; *s; s++) - { - c = *s; - if (META_CHAR (c)) - { - *r++ = '\\'; - *r++ = 'M'; - *r++ = '-'; - c = UNMETA (c); - } - else if (c == ESC) - { - *r++ = '\\'; - c = 'e'; - } - else if (CTRL_CHAR (c)) - { - *r++ = '\\'; - if (use_escapes && _rl_isescape (c)) - c = _rl_escchar (c); - else - { - *r++ = 'C'; - *r++ = '-'; - c = _rl_to_lower (UNCTRL (c)); - } - } - else if (c == RUBOUT) - { - *r++ = '\\'; - *r++ = 'C'; - *r++ = '-'; - c = '?'; - } - - if (c == ESC) - { - *r++ = '\\'; - c = 'e'; - } - else if (c == '\\' || c == '"') - *r++ = '\\'; - - *r++ = (unsigned char)c; - } - *r = '\0'; - return ret; -} - -/* Return a pointer to the function that STRING represents. - If STRING doesn't have a matching function, then a NULL pointer - is returned. */ -rl_command_func_t * -rl_named_function (const char *string) -{ - register int i; - - rl_initialize_funmap (); - - for (i = 0; funmap[i]; i++) - if (_rl_stricmp (funmap[i]->name, string) == 0) - return (funmap[i]->function); - return ((rl_command_func_t *)NULL); -} - -/* Return the function (or macro) definition which would be invoked via - KEYSEQ if executed in MAP. If MAP is NULL, then the current keymap is - used. TYPE, if non-NULL, is a pointer to an int which will receive the - type of the object pointed to. One of ISFUNC (function), ISKMAP (keymap), - or ISMACR (macro). */ -static rl_command_func_t * -_rl_function_of_keyseq_internal (const char *keyseq, size_t len, Keymap map, int *type) -{ - register int i; - - if (map == 0) - map = _rl_keymap; - - for (i = 0; keyseq && i < len; i++) - { - unsigned char ic = keyseq[i]; - - if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii) - { - if (map[ESC].type == ISKMAP) - { - map = FUNCTION_TO_KEYMAP (map, ESC); - ic = UNMETA (ic); - } - /* XXX - should we just return NULL here, since this obviously - doesn't match? */ - else - { - if (type) - *type = map[ESC].type; - - return (map[ESC].function); - } - } - - if (map[ic].type == ISKMAP) - { - /* If this is the last key in the key sequence, return the - map. */ - if (keyseq[i + 1] == '\0') - { - if (type) - *type = ISKMAP; - - return (map[ic].function); - } - else - map = FUNCTION_TO_KEYMAP (map, ic); - } - /* If we're not at the end of the key sequence, and the current key - is bound to something other than a keymap, then the entire key - sequence is not bound. */ - else if (map[ic].type != ISKMAP && keyseq[i+1]) - return ((rl_command_func_t *)NULL); - else /* map[ic].type != ISKMAP && keyseq[i+1] == 0 */ - { - if (type) - *type = map[ic].type; - - return (map[ic].function); - } - } - return ((rl_command_func_t *) NULL); -} - -rl_command_func_t * -rl_function_of_keyseq (const char *keyseq, Keymap map, int *type) -{ - return _rl_function_of_keyseq_internal (keyseq, strlen (keyseq), map, type); -} - -rl_command_func_t * -rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) -{ - return _rl_function_of_keyseq_internal (keyseq, len, map, type); -} - -/* The last key bindings file read. */ -static char *last_readline_init_file = (char *)NULL; - -/* The file we're currently reading key bindings from. */ -static const char *current_readline_init_file; -static int current_readline_init_include_level; -static int current_readline_init_lineno; - -/* Read FILENAME into a locally-allocated buffer and return the buffer. - The size of the buffer is returned in *SIZEP. Returns NULL if any - errors were encountered. */ -static char * -_rl_read_file (char *filename, size_t *sizep) -{ - struct stat finfo; - size_t file_size; - char *buffer; - int i, file; - - file = -1; - if (((file = open (filename, O_RDONLY, 0666)) < 0) || (fstat (file, &finfo) < 0)) - { - if (file >= 0) - close (file); - return ((char *)NULL); - } - - file_size = (size_t)finfo.st_size; - - /* check for overflow on very large files */ - if (file_size != finfo.st_size || file_size + 1 < file_size) - { - if (file >= 0) - close (file); -#if defined (EFBIG) - errno = EFBIG; -#endif - return ((char *)NULL); - } - - /* Read the file into BUFFER. */ - buffer = (char *)xmalloc (file_size + 1); - i = read (file, buffer, file_size); - close (file); - - if (i < 0) - { - xfree (buffer); - return ((char *)NULL); - } - - RL_CHECK_SIGNALS (); - - buffer[i] = '\0'; - if (sizep) - *sizep = i; - - return (buffer); -} - -/* Re-read the current keybindings file. */ -int -rl_re_read_init_file (int count, int ignore) -{ - int r; - r = rl_read_init_file ((const char *)NULL); - rl_set_keymap_from_edit_mode (); - return r; -} - -/* Do key bindings from a file. If FILENAME is NULL it defaults - to the first non-null filename from this list: - 1. the filename used for the previous call - 2. the value of the shell variable `INPUTRC' - 3. ~/.inputrc - 4. /etc/inputrc - If the file existed and could be opened and read, 0 is returned, - otherwise errno is returned. */ -int -rl_read_init_file (const char *filename) -{ - /* Default the filename. */ - if (filename == 0) - filename = last_readline_init_file; - if (filename == 0) - filename = sh_get_env_value ("INPUTRC"); - if (filename == 0 || *filename == 0) - { - filename = DEFAULT_INPUTRC; - /* Try to read DEFAULT_INPUTRC; fall back to SYS_INPUTRC on failure */ - if (_rl_read_init_file (filename, 0) == 0) - return 0; - filename = SYS_INPUTRC; - } - -#if defined (__MSDOS__) - if (_rl_read_init_file (filename, 0) == 0) - return 0; - filename = "~/_inputrc"; -#endif - return (_rl_read_init_file (filename, 0)); -} - -static int -_rl_read_init_file (const char *filename, int include_level) -{ - register int i; - char *buffer, *openname, *line, *end; - size_t file_size; - - current_readline_init_file = filename; - current_readline_init_include_level = include_level; - - openname = tilde_expand (filename); - buffer = _rl_read_file (openname, &file_size); - xfree (openname); - - RL_CHECK_SIGNALS (); - if (buffer == 0) - return (errno); - - if (include_level == 0 && filename != last_readline_init_file) - { - FREE (last_readline_init_file); - last_readline_init_file = savestring (filename); - } - - currently_reading_init_file = 1; - - /* Loop over the lines in the file. Lines that start with `#' are - comments; all other lines are commands for readline initialization. */ - current_readline_init_lineno = 1; - line = buffer; - end = buffer + file_size; - while (line < end) - { - /* Find the end of this line. */ - for (i = 0; line + i != end && line[i] != '\n'; i++); - -#if defined (__CYGWIN__) - /* ``Be liberal in what you accept.'' */ - if (line[i] == '\n' && line[i-1] == '\r') - line[i - 1] = '\0'; -#endif - - /* Mark end of line. */ - line[i] = '\0'; - - /* Skip leading whitespace. */ - while (*line && whitespace (*line)) - { - line++; - i--; - } - - /* If the line is not a comment, then parse it. */ - if (*line && *line != '#') - rl_parse_and_bind (line); - - /* Move to the next line. */ - line += i + 1; - current_readline_init_lineno++; - } - - xfree (buffer); - currently_reading_init_file = 0; - return (0); -} - -static void -#if defined (PREFER_STDARG) -_rl_init_file_error (const char *format, ...) -#else -_rl_init_file_error (va_alist) - va_dcl -#endif -{ - va_list args; -#if defined (PREFER_VARARGS) - char *format; -#endif - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - - fprintf (stderr, "readline: "); - if (currently_reading_init_file) - fprintf (stderr, "%s: line %d: ", current_readline_init_file, - current_readline_init_lineno); - - vfprintf (stderr, format, args); - fprintf (stderr, "\n"); - fflush (stderr); - - va_end (args); -} - -/* **************************************************************** */ -/* */ -/* Parser Helper Functions */ -/* */ -/* **************************************************************** */ - -static int -parse_comparison_op (s, indp) - const char *s; - int *indp; -{ - int i, peekc, op; - - if (OPSTART (s[*indp]) == 0) - return -1; - i = *indp; - peekc = s[i] ? s[i+1] : 0; - op = -1; - - if (s[i] == '=') - { - op = OP_EQ; - if (peekc == '=') - i++; - i++; - } - else if (s[i] == '!' && peekc == '=') - { - op = OP_NE; - i += 2; - } - else if (s[i] == '<' && peekc == '=') - { - op = OP_LE; - i += 2; - } - else if (s[i] == '>' && peekc == '=') - { - op = OP_GE; - i += 2; - } - else if (s[i] == '<') - { - op = OP_LT; - i += 1; - } - else if (s[i] == '>') - { - op = OP_GT; - i += 1; - } - - *indp = i; - return op; -} - -/* **************************************************************** */ -/* */ -/* Parser Directives */ -/* */ -/* **************************************************************** */ - -typedef int _rl_parser_func_t PARAMS((char *)); - -/* Things that mean `Control'. */ -const char * const _rl_possible_control_prefixes[] = { - "Control-", "C-", "CTRL-", (const char *)NULL -}; - -const char * const _rl_possible_meta_prefixes[] = { - "Meta", "M-", (const char *)NULL -}; - -/* Conditionals. */ - -/* Calling programs set this to have their argv[0]. */ -const char *rl_readline_name = "other"; - -/* Stack of previous values of parsing_conditionalized_out. */ -static unsigned char *if_stack = (unsigned char *)NULL; -static int if_stack_depth; -static int if_stack_size; - -/* Push _rl_parsing_conditionalized_out, and set parser state based - on ARGS. */ -static int -parser_if (char *args) -{ - int i, llen, boolvar, strvar; - - boolvar = strvar = -1; - - /* Push parser state. */ - if (if_stack_depth + 1 >= if_stack_size) - { - if (!if_stack) - if_stack = (unsigned char *)xmalloc (if_stack_size = 20); - else - if_stack = (unsigned char *)xrealloc (if_stack, if_stack_size += 20); - } - if_stack[if_stack_depth++] = _rl_parsing_conditionalized_out; - - /* If parsing is turned off, then nothing can turn it back on except - for finding the matching endif. In that case, return right now. */ - if (_rl_parsing_conditionalized_out) - return 0; - - llen = strlen (args); - - /* Isolate first argument. */ - for (i = 0; args[i] && !whitespace (args[i]); i++); - - if (args[i]) - args[i++] = '\0'; - - /* Handle "$if term=foo" and "$if mode=emacs" constructs. If this - isn't term=foo, or mode=emacs, then check to see if the first - word in ARGS is the same as the value stored in rl_readline_name. */ - if (rl_terminal_name && _rl_strnicmp (args, "term=", 5) == 0) - { - char *tem, *tname; - - /* Terminals like "aaa-60" are equivalent to "aaa". */ - tname = savestring (rl_terminal_name); - tem = strchr (tname, '-'); - if (tem) - *tem = '\0'; - - /* Test the `long' and `short' forms of the terminal name so that - if someone has a `sun-cmd' and does not want to have bindings - that will be executed if the terminal is a `sun', they can put - `$if term=sun-cmd' into their .inputrc. */ - _rl_parsing_conditionalized_out = _rl_stricmp (args + 5, tname) && - _rl_stricmp (args + 5, rl_terminal_name); - xfree (tname); - } -#if defined (VI_MODE) - else if (_rl_strnicmp (args, "mode=", 5) == 0) - { - int mode; - - if (_rl_stricmp (args + 5, "emacs") == 0) - mode = emacs_mode; - else if (_rl_stricmp (args + 5, "vi") == 0) - mode = vi_mode; - else - mode = no_mode; - - _rl_parsing_conditionalized_out = mode != rl_editing_mode; - } -#endif /* VI_MODE */ - else if (_rl_strnicmp (args, "version", 7) == 0) - { - int rlversion, versionarg, op, previ, major, minor; - - _rl_parsing_conditionalized_out = 1; - rlversion = RL_VERSION_MAJOR*10 + RL_VERSION_MINOR; - /* if "version" is separated from the operator by whitespace, or the - operand is separated from the operator by whitespace, restore it. - We're more liberal with allowed whitespace for this variable. */ - if (i > 0 && i <= llen && args[i-1] == '\0') - args[i-1] = ' '; - args[llen] = '\0'; /* just in case */ - for (i = 7; whitespace (args[i]); i++) - ; - if (OPSTART(args[i]) == 0) - { - _rl_init_file_error ("comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line"); - return 0; - } - previ = i; - op = parse_comparison_op (args, &i); - if (op <= 0) - { - _rl_init_file_error ("comparison operator expected, found `%s'", args+previ); - return 0; - } - for ( ; args[i] && whitespace (args[i]); i++) - ; - if (args[i] == 0 || _rl_digit_p (args[i]) == 0) - { - _rl_init_file_error ("numeric argument expected, found `%s'", args+i); - return 0; - } - major = minor = 0; - previ = i; - for ( ; args[i] && _rl_digit_p (args[i]); i++) - major = major*10 + _rl_digit_value (args[i]); - if (args[i] == '.') - { - if (args[i + 1] && _rl_digit_p (args [i + 1]) == 0) - { - _rl_init_file_error ("numeric argument expected, found `%s'", args+previ); - return 0; - } - for (++i; args[i] && _rl_digit_p (args[i]); i++) - minor = minor*10 + _rl_digit_value (args[i]); - } - /* optional - check for trailing garbage on the line, allow whitespace - and a trailing comment */ - previ = i; - for ( ; args[i] && whitespace (args[i]); i++) - ; - if (args[i] && args[i] != '#') - { - _rl_init_file_error ("trailing garbage on line: `%s'", args+previ); - return 0; - } - versionarg = major*10 + minor; - - switch (op) - { - case OP_EQ: - _rl_parsing_conditionalized_out = rlversion == versionarg; - break; - case OP_NE: - _rl_parsing_conditionalized_out = rlversion != versionarg; - break; - case OP_GT: - _rl_parsing_conditionalized_out = rlversion > versionarg; - break; - case OP_GE: - _rl_parsing_conditionalized_out = rlversion >= versionarg; - break; - case OP_LT: - _rl_parsing_conditionalized_out = rlversion < versionarg; - break; - case OP_LE: - _rl_parsing_conditionalized_out = rlversion <= versionarg; - break; - } - } - /* Check to see if the first word in ARGS is the same as the - value stored in rl_readline_name. */ - else if (_rl_stricmp (args, rl_readline_name) == 0) - _rl_parsing_conditionalized_out = 0; - else if ((boolvar = find_boolean_var (args)) >= 0 || (strvar = find_string_var (args)) >= 0) - { - int op, previ; - size_t vlen; - const char *vname; - char *valuearg, *vval, prevc; - - _rl_parsing_conditionalized_out = 1; - vname = (boolvar >= 0) ? boolean_varname (boolvar) : string_varname (strvar); - vlen = strlen (vname); - if (i > 0 && i <= llen && args[i-1] == '\0') - args[i-1] = ' '; - args[llen] = '\0'; /* just in case */ - for (i = vlen; whitespace (args[i]); i++) - ; - if (CMPSTART(args[i]) == 0) - { - _rl_init_file_error ("equality comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line"); - return 0; - } - previ = i; - op = parse_comparison_op (args, &i); - if (op != OP_EQ && op != OP_NE) - { - _rl_init_file_error ("equality comparison operator expected, found `%s'", args+previ); - return 0; - } - for ( ; args[i] && whitespace (args[i]); i++) - ; - if (args[i] == 0) - { - _rl_init_file_error ("argument expected, found `%s'", args+i); - return 0; - } - previ = i; - valuearg = args + i; - for ( ; args[i] && whitespace (args[i]) == 0; i++) - ; - prevc = args[i]; - args[i] = '\0'; /* null-terminate valuearg */ - vval = rl_variable_value (vname); - if (op == OP_EQ) - _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) != 0; - else if (op == OP_NE) - _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) == 0; - args[i] = prevc; - } - else - _rl_parsing_conditionalized_out = 1; - return 0; -} - -/* Invert the current parser state if there is anything on the stack. */ -static int -parser_else (char *args) -{ - register int i; - - if (if_stack_depth == 0) - { - _rl_init_file_error ("$else found without matching $if"); - return 0; - } - -#if 0 - /* Check the previous (n - 1) levels of the stack to make sure that - we haven't previously turned off parsing. */ - for (i = 0; i < if_stack_depth - 1; i++) -#else - /* Check the previous (n) levels of the stack to make sure that - we haven't previously turned off parsing. */ - for (i = 0; i < if_stack_depth; i++) -#endif - if (if_stack[i] == 1) - return 0; - - /* Invert the state of parsing if at top level. */ - _rl_parsing_conditionalized_out = !_rl_parsing_conditionalized_out; - return 0; -} - -/* Terminate a conditional, popping the value of - _rl_parsing_conditionalized_out from the stack. */ -static int -parser_endif (char *args) -{ - if (if_stack_depth) - _rl_parsing_conditionalized_out = if_stack[--if_stack_depth]; - else - _rl_init_file_error ("$endif without matching $if"); - return 0; -} - -static int -parser_include (char *args) -{ - const char *old_init_file; - char *e; - int old_line_number, old_include_level, r; - - if (_rl_parsing_conditionalized_out) - return (0); - - old_init_file = current_readline_init_file; - old_line_number = current_readline_init_lineno; - old_include_level = current_readline_init_include_level; - - e = strchr (args, '\n'); - if (e) - *e = '\0'; - r = _rl_read_init_file ((const char *)args, old_include_level + 1); - - current_readline_init_file = old_init_file; - current_readline_init_lineno = old_line_number; - current_readline_init_include_level = old_include_level; - - return r; -} - -/* Associate textual names with actual functions. */ -static const struct { - const char * const name; - _rl_parser_func_t *function; -} parser_directives [] = { - { "if", parser_if }, - { "endif", parser_endif }, - { "else", parser_else }, - { "include", parser_include }, - { (char *)0x0, (_rl_parser_func_t *)0x0 } -}; - -/* Handle a parser directive. STATEMENT is the line of the directive - without any leading `$'. */ -static int -handle_parser_directive (char *statement) -{ - register int i; - char *directive, *args; - - /* Isolate the actual directive. */ - - /* Skip whitespace. */ - for (i = 0; whitespace (statement[i]); i++); - - directive = &statement[i]; - - for (; statement[i] && !whitespace (statement[i]); i++); - - if (statement[i]) - statement[i++] = '\0'; - - for (; statement[i] && whitespace (statement[i]); i++); - - args = &statement[i]; - - /* Lookup the command, and act on it. */ - for (i = 0; parser_directives[i].name; i++) - if (_rl_stricmp (directive, parser_directives[i].name) == 0) - { - (*parser_directives[i].function) (args); - return (0); - } - - /* display an error message about the unknown parser directive */ - _rl_init_file_error ("%s: unknown parser directive", directive); - return (1); -} - -/* Start at STRING[START] and look for DELIM. Return I where STRING[I] == - DELIM or STRING[I] == 0. DELIM is usually a double quote. */ -static int -_rl_skip_to_delim (char *string, int start, int delim) -{ - int i, c, passc; - - for (i = start,passc = 0; c = string[i]; i++) - { - if (passc) - { - passc = 0; - if (c == 0) - break; - continue; - } - - if (c == '\\') - { - passc = 1; - continue; - } - - if (c == delim) - break; - } - - return i; -} - -/* Read the binding command from STRING and perform it. - A key binding command looks like: Keyname: function-name\0, - a variable binding command looks like: set variable value. - A new-style keybinding looks like "\C-x\C-x": exchange-point-and-mark. */ -int -rl_parse_and_bind (char *string) -{ - char *funname, *kname; - register int c, i; - int key, equivalency, foundmod, foundsep; - - while (string && whitespace (*string)) - string++; - - if (string == 0 || *string == 0 || *string == '#') - return 0; - - /* If this is a parser directive, act on it. */ - if (*string == '$') - { - handle_parser_directive (&string[1]); - return 0; - } - - /* If we aren't supposed to be parsing right now, then we're done. */ - if (_rl_parsing_conditionalized_out) - return 0; - - i = 0; - /* If this keyname is a complex key expression surrounded by quotes, - advance to after the matching close quote. This code allows the - backslash to quote characters in the key expression. */ - if (*string == '"') - { - i = _rl_skip_to_delim (string, 1, '"'); - - /* If we didn't find a closing quote, abort the line. */ - if (string[i] == '\0') - { - _rl_init_file_error ("%s: no closing `\"' in key binding", string); - return 1; - } - else - i++; /* skip past closing double quote */ - } - - /* Advance to the colon (:) or whitespace which separates the two objects. */ - for (; (c = string[i]) && c != ':' && c != ' ' && c != '\t'; i++ ); - - if (i == 0) - { - _rl_init_file_error ("`%s': invalid key binding: missing key sequence", string); - return 1; - } - - equivalency = (c == ':' && string[i + 1] == '='); - - foundsep = c != 0; - - /* Mark the end of the command (or keyname). */ - if (string[i]) - string[i++] = '\0'; - - /* If doing assignment, skip the '=' sign as well. */ - if (equivalency) - string[i++] = '\0'; - - /* If this is a command to set a variable, then do that. */ - if (_rl_stricmp (string, "set") == 0) - { - char *var, *value, *e; - int s; - - var = string + i; - /* Make VAR point to start of variable name. */ - while (*var && whitespace (*var)) var++; - - /* Make VALUE point to start of value string. */ - value = var; - while (*value && whitespace (*value) == 0) value++; - if (*value) - *value++ = '\0'; - while (*value && whitespace (*value)) value++; - - /* Strip trailing whitespace from values of boolean variables. */ - if (find_boolean_var (var) >= 0) - { - /* remove trailing whitespace */ -remove_trailing: - e = value + strlen (value) - 1; - while (e >= value && whitespace (*e)) - e--; - e++; /* skip back to whitespace or EOS */ - - if (*e && e >= value) - *e = '\0'; - } - else if ((i = find_string_var (var)) >= 0) - { - /* Allow quoted strings in variable values */ - if (*value == '"') - { - i = _rl_skip_to_delim (value, 1, *value); - value[i] = '\0'; - value++; /* skip past the quote */ - } - else - goto remove_trailing; - } - - rl_variable_bind (var, value); - return 0; - } - - /* Skip any whitespace between keyname and funname. */ - for (; string[i] && whitespace (string[i]); i++); - funname = &string[i]; - - /* Now isolate funname. - For straight function names just look for whitespace, since - that will signify the end of the string. But this could be a - macro definition. In that case, the string is quoted, so skip - to the matching delimiter. We allow the backslash to quote the - delimiter characters in the macro body. */ - /* This code exists to allow whitespace in macro expansions, which - would otherwise be gobbled up by the next `for' loop.*/ - /* XXX - it may be desirable to allow backslash quoting only if " is - the quoted string delimiter, like the shell. */ - if (*funname == '\'' || *funname == '"') - { - i = _rl_skip_to_delim (string, i+1, *funname); - if (string[i]) - i++; - else - { - _rl_init_file_error ("`%s': missing closing quote for macro", funname); - return 1; - } - } - - /* Advance to the end of the string. */ - for (; string[i] && whitespace (string[i]) == 0; i++); - - /* No extra whitespace at the end of the string. */ - string[i] = '\0'; - - /* Handle equivalency bindings here. Make the left-hand side be exactly - whatever the right-hand evaluates to, including keymaps. */ - if (equivalency) - { - return 0; - } - - if (foundsep == 0) - { - _rl_init_file_error ("%s: no key sequence terminator", string); - return 1; - } - - /* If this is a new-style key-binding, then do the binding with - rl_bind_keyseq (). Otherwise, let the older code deal with it. */ - if (*string == '"') - { - char *seq; - register int j, k, passc; - - seq = (char *)xmalloc (1 + strlen (string)); - for (j = 1, k = passc = 0; string[j]; j++) - { - /* Allow backslash to quote characters, but leave them in place. - This allows a string to end with a backslash quoting another - backslash, or with a backslash quoting a double quote. The - backslashes are left in place for rl_translate_keyseq (). */ - if (passc || (string[j] == '\\')) - { - seq[k++] = string[j]; - passc = !passc; - continue; - } - - if (string[j] == '"') - break; - - seq[k++] = string[j]; - } - seq[k] = '\0'; - - /* Binding macro? */ - if (*funname == '\'' || *funname == '"') - { - j = strlen (funname); - - /* Remove the delimiting quotes from each end of FUNNAME. */ - if (j && funname[j - 1] == *funname) - funname[j - 1] = '\0'; - - rl_macro_bind (seq, &funname[1], _rl_keymap); - } - else - rl_bind_keyseq (seq, rl_named_function (funname)); - - xfree (seq); - return 0; - } - - /* Get the actual character we want to deal with. */ - kname = strrchr (string, '-'); - if (kname == 0) - kname = string; - else - kname++; - - key = glean_key_from_name (kname); - - /* Add in control and meta bits. */ - foundmod = 0; - if (substring_member_of_array (string, _rl_possible_control_prefixes)) - { - key = CTRL (_rl_to_upper (key)); - foundmod = 1; - } - - if (substring_member_of_array (string, _rl_possible_meta_prefixes)) - { - key = META (key); - foundmod = 1; - } - - if (foundmod == 0 && kname != string) - { - _rl_init_file_error ("%s: unknown key modifier", string); - return 1; - } - - /* Temporary. Handle old-style keyname with macro-binding. */ - if (*funname == '\'' || *funname == '"') - { - char useq[2]; - int fl = strlen (funname); - - useq[0] = key; useq[1] = '\0'; - if (fl && funname[fl - 1] == *funname) - funname[fl - 1] = '\0'; - - rl_macro_bind (useq, &funname[1], _rl_keymap); - } -#if defined (PREFIX_META_HACK) - /* Ugly, but working hack to keep prefix-meta around. */ - else if (_rl_stricmp (funname, "prefix-meta") == 0) - { - char seq[2]; - - seq[0] = key; - seq[1] = '\0'; - rl_generic_bind (ISKMAP, seq, (char *)emacs_meta_keymap, _rl_keymap); - } -#endif /* PREFIX_META_HACK */ - else - rl_bind_key (key, rl_named_function (funname)); - - return 0; -} - -/* Simple structure for boolean readline variables (i.e., those that can - have one of two values; either "On" or 1 for truth, or "Off" or 0 for - false. */ - -#define V_SPECIAL 0x1 - -static const struct { - const char * const name; - int *value; - int flags; -} boolean_varlist [] = { - { "bind-tty-special-chars", &_rl_bind_stty_chars, 0 }, - { "blink-matching-paren", &rl_blink_matching_paren, V_SPECIAL }, - { "byte-oriented", &rl_byte_oriented, 0 }, -#if defined (COLOR_SUPPORT) - { "colored-completion-prefix",&_rl_colored_completion_prefix, 0 }, - { "colored-stats", &_rl_colored_stats, 0 }, -#endif - { "completion-ignore-case", &_rl_completion_case_fold, 0 }, - { "completion-map-case", &_rl_completion_case_map, 0 }, - { "convert-meta", &_rl_convert_meta_chars_to_ascii, 0 }, - { "disable-completion", &rl_inhibit_completion, 0 }, - { "echo-control-characters", &_rl_echo_control_chars, 0 }, - { "enable-bracketed-paste", &_rl_enable_bracketed_paste, 0 }, - { "enable-keypad", &_rl_enable_keypad, 0 }, - { "enable-meta-key", &_rl_enable_meta, 0 }, - { "expand-tilde", &rl_complete_with_tilde_expansion, 0 }, - { "history-preserve-point", &_rl_history_preserve_point, 0 }, - { "horizontal-scroll-mode", &_rl_horizontal_scroll_mode, 0 }, - { "input-meta", &_rl_meta_flag, 0 }, - { "mark-directories", &_rl_complete_mark_directories, 0 }, - { "mark-modified-lines", &_rl_mark_modified_lines, 0 }, - { "mark-symlinked-directories", &_rl_complete_mark_symlink_dirs, 0 }, - { "match-hidden-files", &_rl_match_hidden_files, 0 }, - { "menu-complete-display-prefix", &_rl_menu_complete_prefix_first, 0 }, - { "meta-flag", &_rl_meta_flag, 0 }, - { "output-meta", &_rl_output_meta_chars, 0 }, - { "page-completions", &_rl_page_completions, 0 }, - { "prefer-visible-bell", &_rl_prefer_visible_bell, V_SPECIAL }, - { "print-completions-horizontally", &_rl_print_completions_horizontally, 0 }, - { "revert-all-at-newline", &_rl_revert_all_at_newline, 0 }, - { "show-all-if-ambiguous", &_rl_complete_show_all, 0 }, - { "show-all-if-unmodified", &_rl_complete_show_unmodified, 0 }, - { "show-mode-in-prompt", &_rl_show_mode_in_prompt, 0 }, - { "skip-completed-text", &_rl_skip_completed_text, 0 }, -#if defined (VISIBLE_STATS) - { "visible-stats", &rl_visible_stats, 0 }, -#endif /* VISIBLE_STATS */ - { (char *)NULL, (int *)NULL, 0 } -}; - -static int -find_boolean_var (const char *name) -{ - register int i; - - for (i = 0; boolean_varlist[i].name; i++) - if (_rl_stricmp (name, boolean_varlist[i].name) == 0) - return i; - return -1; -} - -static const char * -boolean_varname (int i) -{ - return ((i >= 0) ? boolean_varlist[i].name : (char *)NULL); -} - -/* Hooks for handling special boolean variables, where a - function needs to be called or another variable needs - to be changed when they're changed. */ -static void -hack_special_boolean_var (int i) -{ - const char *name; - - name = boolean_varlist[i].name; - - if (_rl_stricmp (name, "blink-matching-paren") == 0) - _rl_enable_paren_matching (rl_blink_matching_paren); - else if (_rl_stricmp (name, "prefer-visible-bell") == 0) - { - if (_rl_prefer_visible_bell) - _rl_bell_preference = VISIBLE_BELL; - else - _rl_bell_preference = AUDIBLE_BELL; - } - else if (_rl_stricmp (name, "show-mode-in-prompt") == 0) - _rl_reset_prompt (); -} - -typedef int _rl_sv_func_t PARAMS((const char *)); - -/* These *must* correspond to the array indices for the appropriate - string variable. (Though they're not used right now.) */ -#define V_BELLSTYLE 0 -#define V_COMBEGIN 1 -#define V_EDITMODE 2 -#define V_ISRCHTERM 3 -#define V_KEYMAP 4 - -#define V_STRING 1 -#define V_INT 2 - -/* Forward declarations */ -static int sv_bell_style PARAMS((const char *)); -static int sv_combegin PARAMS((const char *)); -static int sv_dispprefix PARAMS((const char *)); -static int sv_compquery PARAMS((const char *)); -static int sv_compwidth PARAMS((const char *)); -static int sv_editmode PARAMS((const char *)); -static int sv_emacs_modestr PARAMS((const char *)); -static int sv_histsize PARAMS((const char *)); -static int sv_isrchterm PARAMS((const char *)); -static int sv_keymap PARAMS((const char *)); -static int sv_seqtimeout PARAMS((const char *)); -static int sv_viins_modestr PARAMS((const char *)); -static int sv_vicmd_modestr PARAMS((const char *)); - -static const struct { - const char * const name; - int flags; - _rl_sv_func_t *set_func; -} string_varlist[] = { - { "bell-style", V_STRING, sv_bell_style }, - { "comment-begin", V_STRING, sv_combegin }, - { "completion-display-width", V_INT, sv_compwidth }, - { "completion-prefix-display-length", V_INT, sv_dispprefix }, - { "completion-query-items", V_INT, sv_compquery }, - { "editing-mode", V_STRING, sv_editmode }, - { "emacs-mode-string", V_STRING, sv_emacs_modestr }, - { "history-size", V_INT, sv_histsize }, - { "isearch-terminators", V_STRING, sv_isrchterm }, - { "keymap", V_STRING, sv_keymap }, - { "keyseq-timeout", V_INT, sv_seqtimeout }, - { "vi-cmd-mode-string", V_STRING, sv_vicmd_modestr }, - { "vi-ins-mode-string", V_STRING, sv_viins_modestr }, - { (char *)NULL, 0, (_rl_sv_func_t *)0 } -}; - -static int -find_string_var (const char *name) -{ - register int i; - - for (i = 0; string_varlist[i].name; i++) - if (_rl_stricmp (name, string_varlist[i].name) == 0) - return i; - return -1; -} - -static const char * -string_varname (int i) -{ - return ((i >= 0) ? string_varlist[i].name : (char *)NULL); -} - -/* A boolean value that can appear in a `set variable' command is true if - the value is null or empty, `on' (case-insensitive), or "1". Any other - values result in 0 (false). */ -static int -bool_to_int (const char *value) -{ - return (value == 0 || *value == '\0' || - (_rl_stricmp (value, "on") == 0) || - (value[0] == '1' && value[1] == '\0')); -} - -char * -rl_variable_value (const char *name) -{ - register int i; - - /* Check for simple variables first. */ - i = find_boolean_var (name); - if (i >= 0) - return (*boolean_varlist[i].value ? "on" : "off"); - - i = find_string_var (name); - if (i >= 0) - return (_rl_get_string_variable_value (string_varlist[i].name)); - - /* Unknown variable names return NULL. */ - return 0; -} - -int -rl_variable_bind (const char *name, const char *value) -{ - register int i; - int v; - - /* Check for simple variables first. */ - i = find_boolean_var (name); - if (i >= 0) - { - *boolean_varlist[i].value = bool_to_int (value); - if (boolean_varlist[i].flags & V_SPECIAL) - hack_special_boolean_var (i); - return 0; - } - - i = find_string_var (name); - - /* For the time being, string names without a handler function are simply - ignored. */ - if (i < 0 || string_varlist[i].set_func == 0) - { - if (i < 0) - _rl_init_file_error ("%s: unknown variable name", name); - return 0; - } - - v = (*string_varlist[i].set_func) (value); - return v; -} - -static int -sv_editmode (const char *value) -{ - if (_rl_strnicmp (value, "vi", 2) == 0) - { -#if defined (VI_MODE) - _rl_keymap = vi_insertion_keymap; - rl_editing_mode = vi_mode; -#endif /* VI_MODE */ - return 0; - } - else if (_rl_strnicmp (value, "emacs", 5) == 0) - { - _rl_keymap = emacs_standard_keymap; - rl_editing_mode = emacs_mode; - return 0; - } - return 1; -} - -static int -sv_combegin (const char *value) -{ - if (value && *value) - { - FREE (_rl_comment_begin); - _rl_comment_begin = savestring (value); - return 0; - } - return 1; -} - -static int -sv_dispprefix (const char *value) -{ - int nval = 0; - - if (value && *value) - { - nval = atoi (value); - if (nval < 0) - nval = 0; - } - _rl_completion_prefix_display_length = nval; - return 0; -} - -static int -sv_compquery (const char *value) -{ - int nval = 100; - - if (value && *value) - { - nval = atoi (value); - if (nval < 0) - nval = 0; - } - rl_completion_query_items = nval; - return 0; -} - -static int -sv_compwidth (const char *value) -{ - int nval = -1; - - if (value && *value) - nval = atoi (value); - - _rl_completion_columns = nval; - return 0; -} - -static int -sv_histsize (const char *value) -{ - int nval; - - nval = 500; - if (value && *value) - { - nval = atoi (value); - if (nval < 0) - { - unstifle_history (); - return 0; - } - } - stifle_history (nval); - return 0; -} - -static int -sv_keymap (const char *value) -{ - Keymap kmap; - - kmap = rl_get_keymap_by_name (value); - if (kmap) - { - rl_set_keymap (kmap); - return 0; - } - return 1; -} - -static int -sv_seqtimeout (const char *value) -{ - int nval; - - nval = 0; - if (value && *value) - { - nval = atoi (value); - if (nval < 0) - nval = 0; - } - _rl_keyseq_timeout = nval; - return 0; -} - -static int -sv_bell_style (const char *value) -{ - if (value == 0 || *value == '\0') - _rl_bell_preference = AUDIBLE_BELL; - else if (_rl_stricmp (value, "none") == 0 || _rl_stricmp (value, "off") == 0) - _rl_bell_preference = NO_BELL; - else if (_rl_stricmp (value, "audible") == 0 || _rl_stricmp (value, "on") == 0) - _rl_bell_preference = AUDIBLE_BELL; - else if (_rl_stricmp (value, "visible") == 0) - _rl_bell_preference = VISIBLE_BELL; - else - return 1; - return 0; -} - -static int -sv_isrchterm (const char *value) -{ - int beg, end, delim; - char *v; - - if (value == 0) - return 1; - - /* Isolate the value and translate it into a character string. */ - v = savestring (value); - FREE (_rl_isearch_terminators); - if (v[0] == '"' || v[0] == '\'') - { - delim = v[0]; - for (beg = end = 1; v[end] && v[end] != delim; end++) - ; - } - else - { - for (beg = end = 0; v[end] && whitespace (v[end]) == 0; end++) - ; - } - - v[end] = '\0'; - - /* The value starts at v + beg. Translate it into a character string. */ - _rl_isearch_terminators = (char *)xmalloc (2 * strlen (v) + 1); - rl_translate_keyseq (v + beg, _rl_isearch_terminators, &end); - _rl_isearch_terminators[end] = '\0'; - - xfree (v); - return 0; -} - -extern char *_rl_emacs_mode_str; - -static int -sv_emacs_modestr (const char *value) -{ - if (value && *value) - { - FREE (_rl_emacs_mode_str); - _rl_emacs_mode_str = (char *)xmalloc (2 * strlen (value) + 1); - rl_translate_keyseq (value, _rl_emacs_mode_str, &_rl_emacs_modestr_len); - _rl_emacs_mode_str[_rl_emacs_modestr_len] = '\0'; - return 0; - } - else if (value) - { - FREE (_rl_emacs_mode_str); - _rl_emacs_mode_str = (char *)xmalloc (1); - _rl_emacs_mode_str[_rl_emacs_modestr_len = 0] = '\0'; - return 0; - } - else if (value == 0) - { - FREE (_rl_emacs_mode_str); - _rl_emacs_mode_str = 0; /* prompt_modestr does the right thing */ - _rl_emacs_modestr_len = 0; - return 0; - } - return 1; -} - -static int -sv_viins_modestr (const char *value) -{ - if (value && *value) - { - FREE (_rl_vi_ins_mode_str); - _rl_vi_ins_mode_str = (char *)xmalloc (2 * strlen (value) + 1); - rl_translate_keyseq (value, _rl_vi_ins_mode_str, &_rl_vi_ins_modestr_len); - _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len] = '\0'; - return 0; - } - else if (value) - { - FREE (_rl_vi_ins_mode_str); - _rl_vi_ins_mode_str = (char *)xmalloc (1); - _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len = 0] = '\0'; - return 0; - } - else if (value == 0) - { - FREE (_rl_vi_ins_mode_str); - _rl_vi_ins_mode_str = 0; /* prompt_modestr does the right thing */ - _rl_vi_ins_modestr_len = 0; - return 0; - } - return 1; -} - -static int -sv_vicmd_modestr (const char *value) -{ - if (value && *value) - { - FREE (_rl_vi_cmd_mode_str); - _rl_vi_cmd_mode_str = (char *)xmalloc (2 * strlen (value) + 1); - rl_translate_keyseq (value, _rl_vi_cmd_mode_str, &_rl_vi_cmd_modestr_len); - _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len] = '\0'; - return 0; - } - else if (value) - { - FREE (_rl_vi_cmd_mode_str); - _rl_vi_cmd_mode_str = (char *)xmalloc (1); - _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len = 0] = '\0'; - return 0; - } - else if (value == 0) - { - FREE (_rl_vi_cmd_mode_str); - _rl_vi_cmd_mode_str = 0; /* prompt_modestr does the right thing */ - _rl_vi_cmd_modestr_len = 0; - return 0; - } - return 1; -} - -/* Return the character which matches NAME. - For example, `Space' returns ' '. */ - -typedef struct { - const char * const name; - int value; -} assoc_list; - -static const assoc_list name_key_alist[] = { - { "DEL", 0x7f }, - { "ESC", '\033' }, - { "Escape", '\033' }, - { "LFD", '\n' }, - { "Newline", '\n' }, - { "RET", '\r' }, - { "Return", '\r' }, - { "Rubout", 0x7f }, - { "SPC", ' ' }, - { "Space", ' ' }, - { "Tab", 0x09 }, - { (char *)0x0, 0 } -}; - -static int -glean_key_from_name (char *name) -{ - register int i; - - for (i = 0; name_key_alist[i].name; i++) - if (_rl_stricmp (name, name_key_alist[i].name) == 0) - return (name_key_alist[i].value); - - return (*(unsigned char *)name); /* XXX was return (*name) */ -} - -/* Auxiliary functions to manage keymaps. */ -struct name_and_keymap { - char *name; - Keymap map; -}; - -static struct name_and_keymap builtin_keymap_names[] = { - { "emacs", emacs_standard_keymap }, - { "emacs-standard", emacs_standard_keymap }, - { "emacs-meta", emacs_meta_keymap }, - { "emacs-ctlx", emacs_ctlx_keymap }, -#if defined (VI_MODE) - { "vi", vi_movement_keymap }, - { "vi-move", vi_movement_keymap }, - { "vi-command", vi_movement_keymap }, - { "vi-insert", vi_insertion_keymap }, -#endif /* VI_MODE */ - { (char *)0x0, (Keymap)0x0 } -}; - -/* -1 for NULL entry */ -#define NUM_BUILTIN_KEYMAPS (sizeof (builtin_keymap_names) / sizeof (builtin_keymap_names[0]) - 1) - -static struct name_and_keymap *keymap_names = builtin_keymap_names; - -static int -_rl_get_keymap_by_name (const char *name) -{ - register int i; - - for (i = 0; keymap_names[i].name; i++) - if (_rl_stricmp (name, keymap_names[i].name) == 0) - return (i); - return -1; -} - -Keymap -rl_get_keymap_by_name (const char *name) -{ - int i; - - i = _rl_get_keymap_by_name (name); - return ((i >= 0) ? keymap_names[i].map : (Keymap) NULL); -} - -static int -_rl_get_keymap_by_map (Keymap map) -{ - register int i; - - for (i = 0; keymap_names[i].name; i++) - if (map == keymap_names[i].map) - return (i); - return -1; -} - -char * -rl_get_keymap_name (Keymap map) -{ - int i; - - i = _rl_get_keymap_by_map (map); - return ((i >= 0) ? keymap_names[i].name : (char *)NULL); -} - -int -rl_set_keymap_name (const char *name, Keymap map) -{ - int i, ni, mi; - - /* First check whether or not we're trying to rename a builtin keymap */ - mi = _rl_get_keymap_by_map (map); - if (mi >= 0 && mi < NUM_BUILTIN_KEYMAPS) - return -1; - - /* Then reject attempts to set one of the builtin names to a new map */ - ni = _rl_get_keymap_by_name (name); - if (ni >= 0 && ni < NUM_BUILTIN_KEYMAPS) - return -1; - - /* Renaming a keymap we already added */ - if (mi >= 0) /* XXX - could be >= NUM_BUILTIN_KEYMAPS */ - { - xfree (keymap_names[mi].name); - keymap_names[mi].name = savestring (name); - return mi; - } - - /* Associating new keymap with existing name */ - if (ni >= 0) - { - keymap_names[ni].map = map; - return ni; - } - - for (i = 0; keymap_names[i].name; i++) - ; - - if (keymap_names == builtin_keymap_names) - { - keymap_names = xmalloc ((i + 2) * sizeof (struct name_and_keymap)); - memcpy (keymap_names, builtin_keymap_names, i * sizeof (struct name_and_keymap)); - } - else - keymap_names = xrealloc (keymap_names, (i + 2) * sizeof (struct name_and_keymap)); - - keymap_names[i].name = savestring (name); - keymap_names[i].map = map; - - keymap_names[i+1].name = NULL; - keymap_names[i+1].map = NULL; - - return i; -} - -void -rl_set_keymap (Keymap map) -{ - if (map) - _rl_keymap = map; -} - -Keymap -rl_get_keymap (void) -{ - return (_rl_keymap); -} - -void -rl_set_keymap_from_edit_mode (void) -{ - if (rl_editing_mode == emacs_mode) - _rl_keymap = emacs_standard_keymap; -#if defined (VI_MODE) - else if (rl_editing_mode == vi_mode) - _rl_keymap = vi_insertion_keymap; -#endif /* VI_MODE */ -} - -char * -rl_get_keymap_name_from_edit_mode (void) -{ - if (rl_editing_mode == emacs_mode) - return "emacs"; -#if defined (VI_MODE) - else if (rl_editing_mode == vi_mode) - return "vi"; -#endif /* VI_MODE */ - else - return "none"; -} - -/* **************************************************************** */ -/* */ -/* Key Binding and Function Information */ -/* */ -/* **************************************************************** */ - -/* Each of the following functions produces information about the - state of keybindings and functions known to Readline. The info - is always printed to rl_outstream, and in such a way that it can - be read back in (i.e., passed to rl_parse_and_bind ()). */ - -/* Print the names of functions known to Readline. */ -void -rl_list_funmap_names (void) -{ - register int i; - const char **funmap_names; - - funmap_names = rl_funmap_names (); - - if (!funmap_names) - return; - - for (i = 0; funmap_names[i]; i++) - fprintf (rl_outstream, "%s\n", funmap_names[i]); - - xfree (funmap_names); -} - -static char * -_rl_get_keyname (int key) -{ - char *keyname; - int i, c; - - keyname = (char *)xmalloc (8); - - c = key; - /* Since this is going to be used to write out keysequence-function - pairs for possible inclusion in an inputrc file, we don't want to - do any special meta processing on KEY. */ - -#if 1 - /* XXX - Experimental */ - /* We might want to do this, but the old version of the code did not. */ - - /* If this is an escape character, we don't want to do any more processing. - Just add the special ESC key sequence and return. */ - if (c == ESC) - { - keyname[0] = '\\'; - keyname[1] = 'e'; - keyname[2] = '\0'; - return keyname; - } -#endif - - /* RUBOUT is translated directly into \C-? */ - if (key == RUBOUT) - { - keyname[0] = '\\'; - keyname[1] = 'C'; - keyname[2] = '-'; - keyname[3] = '?'; - keyname[4] = '\0'; - return keyname; - } - - i = 0; - /* Now add special prefixes needed for control characters. This can - potentially change C. */ - if (CTRL_CHAR (c)) - { - keyname[i++] = '\\'; - keyname[i++] = 'C'; - keyname[i++] = '-'; - c = _rl_to_lower (UNCTRL (c)); - } - - /* XXX experimental code. Turn the characters that are not ASCII or - ISO Latin 1 (128 - 159) into octal escape sequences (\200 - \237). - This changes C. */ - if (c >= 128 && c <= 159) - { - keyname[i++] = '\\'; - keyname[i++] = '2'; - c -= 128; - keyname[i++] = (c / 8) + '0'; - c = (c % 8) + '0'; - } - - /* Now, if the character needs to be quoted with a backslash, do that. */ - if (c == '\\' || c == '"') - keyname[i++] = '\\'; - - /* Now add the key, terminate the string, and return it. */ - keyname[i++] = (char) c; - keyname[i] = '\0'; - - return keyname; -} - -/* Return a NULL terminated array of strings which represent the key - sequences that are used to invoke FUNCTION in MAP. */ -char ** -rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map) -{ - register int key; - char **result; - int result_index, result_size; - - result = (char **)NULL; - result_index = result_size = 0; - - for (key = 0; key < KEYMAP_SIZE; key++) - { - switch (map[key].type) - { - case ISMACR: - /* Macros match, if, and only if, the pointers are identical. - Thus, they are treated exactly like functions in here. */ - case ISFUNC: - /* If the function in the keymap is the one we are looking for, - then add the current KEY to the list of invoking keys. */ - if (map[key].function == function) - { - char *keyname; - - keyname = _rl_get_keyname (key); - - if (result_index + 2 > result_size) - { - result_size += 10; - result = (char **)xrealloc (result, result_size * sizeof (char *)); - } - - result[result_index++] = keyname; - result[result_index] = (char *)NULL; - } - break; - - case ISKMAP: - { - char **seqs; - register int i; - - /* Find the list of keyseqs in this map which have FUNCTION as - their target. Add the key sequences found to RESULT. */ - if (map[key].function) - seqs = - rl_invoking_keyseqs_in_map (function, FUNCTION_TO_KEYMAP (map, key)); - else - break; - - if (seqs == 0) - break; - - for (i = 0; seqs[i]; i++) - { - char *keyname = (char *)xmalloc (6 + strlen (seqs[i])); - - if (key == ESC) - { - /* If ESC is the meta prefix and we're converting chars - with the eighth bit set to ESC-prefixed sequences, then - we can use \M-. Otherwise we need to use the sequence - for ESC. */ - if (_rl_convert_meta_chars_to_ascii && map[ESC].type == ISKMAP) - sprintf (keyname, "\\M-"); - else - sprintf (keyname, "\\e"); - } - else if (CTRL_CHAR (key)) - sprintf (keyname, "\\C-%c", _rl_to_lower (UNCTRL (key))); - else if (key == RUBOUT) - sprintf (keyname, "\\C-?"); - else if (key == '\\' || key == '"') - { - keyname[0] = '\\'; - keyname[1] = (char) key; - keyname[2] = '\0'; - } - else - { - keyname[0] = (char) key; - keyname[1] = '\0'; - } - - strcat (keyname, seqs[i]); - xfree (seqs[i]); - - if (result_index + 2 > result_size) - { - result_size += 10; - result = (char **)xrealloc (result, result_size * sizeof (char *)); - } - - result[result_index++] = keyname; - result[result_index] = (char *)NULL; - } - - xfree (seqs); - } - break; - } - } - return (result); -} - -/* Return a NULL terminated array of strings which represent the key - sequences that can be used to invoke FUNCTION using the current keymap. */ -char ** -rl_invoking_keyseqs (rl_command_func_t *function) -{ - return (rl_invoking_keyseqs_in_map (function, _rl_keymap)); -} - -/* Print all of the functions and their bindings to rl_outstream. If - PRINT_READABLY is non-zero, then print the output in such a way - that it can be read back in. */ -void -rl_function_dumper (int print_readably) -{ - register int i; - const char **names; - const char *name; - - names = rl_funmap_names (); - - fprintf (rl_outstream, "\n"); - - for (i = 0; name = names[i]; i++) - { - rl_command_func_t *function; - char **invokers; - - function = rl_named_function (name); - invokers = rl_invoking_keyseqs_in_map (function, _rl_keymap); - - if (print_readably) - { - if (!invokers) - fprintf (rl_outstream, "# %s (not bound)\n", name); - else - { - register int j; - - for (j = 0; invokers[j]; j++) - { - fprintf (rl_outstream, "\"%s\": %s\n", - invokers[j], name); - xfree (invokers[j]); - } - - xfree (invokers); - } - } - else - { - if (!invokers) - fprintf (rl_outstream, "%s is not bound to any keys\n", - name); - else - { - register int j; - - fprintf (rl_outstream, "%s can be found on ", name); - - for (j = 0; invokers[j] && j < 5; j++) - { - fprintf (rl_outstream, "\"%s\"%s", invokers[j], - invokers[j + 1] ? ", " : ".\n"); - } - - if (j == 5 && invokers[j]) - fprintf (rl_outstream, "...\n"); - - for (j = 0; invokers[j]; j++) - xfree (invokers[j]); - - xfree (invokers); - } - } - } - - xfree (names); -} - -/* Print all of the current functions and their bindings to - rl_outstream. If an explicit argument is given, then print - the output in such a way that it can be read back in. */ -int -rl_dump_functions (int count, int key) -{ - if (rl_dispatching) - fprintf (rl_outstream, "\r\n"); - rl_function_dumper (rl_explicit_arg); - rl_on_new_line (); - return (0); -} - -static void -_rl_macro_dumper_internal (int print_readably, Keymap map, char *prefix) -{ - register int key; - char *keyname, *out; - int prefix_len; - - for (key = 0; key < KEYMAP_SIZE; key++) - { - switch (map[key].type) - { - case ISMACR: - keyname = _rl_get_keyname (key); - out = _rl_untranslate_macro_value ((char *)map[key].function, 0); - - if (print_readably) - fprintf (rl_outstream, "\"%s%s\": \"%s\"\n", prefix ? prefix : "", - keyname, - out ? out : ""); - else - fprintf (rl_outstream, "%s%s outputs %s\n", prefix ? prefix : "", - keyname, - out ? out : ""); - xfree (keyname); - xfree (out); - break; - case ISFUNC: - break; - case ISKMAP: - prefix_len = prefix ? strlen (prefix) : 0; - if (key == ESC) - { - keyname = (char *)xmalloc (3 + prefix_len); - if (prefix) - strcpy (keyname, prefix); - keyname[prefix_len] = '\\'; - keyname[prefix_len + 1] = 'e'; - keyname[prefix_len + 2] = '\0'; - } - else - { - keyname = _rl_get_keyname (key); - if (prefix) - { - out = (char *)xmalloc (strlen (keyname) + prefix_len + 1); - strcpy (out, prefix); - strcpy (out + prefix_len, keyname); - xfree (keyname); - keyname = out; - } - } - - _rl_macro_dumper_internal (print_readably, FUNCTION_TO_KEYMAP (map, key), keyname); - xfree (keyname); - break; - } - } -} - -void -rl_macro_dumper (int print_readably) -{ - _rl_macro_dumper_internal (print_readably, _rl_keymap, (char *)NULL); -} - -int -rl_dump_macros (int count, int key) -{ - if (rl_dispatching) - fprintf (rl_outstream, "\r\n"); - rl_macro_dumper (rl_explicit_arg); - rl_on_new_line (); - return (0); -} - -static char * -_rl_get_string_variable_value (const char *name) -{ - static char numbuf[32]; - char *ret; - - if (_rl_stricmp (name, "bell-style") == 0) - { - switch (_rl_bell_preference) - { - case NO_BELL: - return "none"; - case VISIBLE_BELL: - return "visible"; - case AUDIBLE_BELL: - default: - return "audible"; - } - } - else if (_rl_stricmp (name, "comment-begin") == 0) - return (_rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT); - else if (_rl_stricmp (name, "completion-display-width") == 0) - { - sprintf (numbuf, "%d", _rl_completion_columns); - return (numbuf); - } - else if (_rl_stricmp (name, "completion-prefix-display-length") == 0) - { - sprintf (numbuf, "%d", _rl_completion_prefix_display_length); - return (numbuf); - } - else if (_rl_stricmp (name, "completion-query-items") == 0) - { - sprintf (numbuf, "%d", rl_completion_query_items); - return (numbuf); - } - else if (_rl_stricmp (name, "editing-mode") == 0) - return (rl_get_keymap_name_from_edit_mode ()); - else if (_rl_stricmp (name, "history-size") == 0) - { - sprintf (numbuf, "%d", history_is_stifled() ? history_max_entries : 0); - return (numbuf); - } - else if (_rl_stricmp (name, "isearch-terminators") == 0) - { - if (_rl_isearch_terminators == 0) - return 0; - ret = _rl_untranslate_macro_value (_rl_isearch_terminators, 0); - if (ret) - { - strncpy (numbuf, ret, sizeof (numbuf) - 1); - xfree (ret); - numbuf[sizeof(numbuf) - 1] = '\0'; - } - else - numbuf[0] = '\0'; - return numbuf; - } - else if (_rl_stricmp (name, "keymap") == 0) - { - ret = rl_get_keymap_name (_rl_keymap); - if (ret == 0) - ret = rl_get_keymap_name_from_edit_mode (); - return (ret ? ret : "none"); - } - else if (_rl_stricmp (name, "keyseq-timeout") == 0) - { - sprintf (numbuf, "%d", _rl_keyseq_timeout); - return (numbuf); - } - else if (_rl_stricmp (name, "emacs-mode-string") == 0) - return (_rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT); - else if (_rl_stricmp (name, "vi-cmd-mode-string") == 0) - return (_rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT); - else if (_rl_stricmp (name, "vi-ins-mode-string") == 0) - return (_rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT); - else - return (0); -} - -void -rl_variable_dumper (int print_readably) -{ - int i; - char *v; - - for (i = 0; boolean_varlist[i].name; i++) - { - if (print_readably) - fprintf (rl_outstream, "set %s %s\n", boolean_varlist[i].name, - *boolean_varlist[i].value ? "on" : "off"); - else - fprintf (rl_outstream, "%s is set to `%s'\n", boolean_varlist[i].name, - *boolean_varlist[i].value ? "on" : "off"); - } - - for (i = 0; string_varlist[i].name; i++) - { - v = _rl_get_string_variable_value (string_varlist[i].name); - if (v == 0) /* _rl_isearch_terminators can be NULL */ - continue; - if (print_readably) - fprintf (rl_outstream, "set %s %s\n", string_varlist[i].name, v); - else - fprintf (rl_outstream, "%s is set to `%s'\n", string_varlist[i].name, v); - } -} - -/* Print all of the current variables and their values to - rl_outstream. If an explicit argument is given, then print - the output in such a way that it can be read back in. */ -int -rl_dump_variables (int count, int key) -{ - if (rl_dispatching) - fprintf (rl_outstream, "\r\n"); - rl_variable_dumper (rl_explicit_arg); - rl_on_new_line (); - return (0); -} - -/* Return non-zero if any members of ARRAY are a substring in STRING. */ -static int -substring_member_of_array (const char *string, const char * const *array) -{ - while (*array) - { - if (_rl_strindex (string, *array)) - return (1); - array++; - } - return (0); -} diff --git a/readline/callback.c b/readline/callback.c deleted file mode 100644 index a466cf9b6e..0000000000 --- a/readline/callback.c +++ /dev/null @@ -1,360 +0,0 @@ -/* callback.c -- functions to use readline as an X `callback' mechanism. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include "rlconf.h" - -#if defined (READLINE_CALLBACKS) - -#include - -#ifdef HAVE_STDLIB_H -# include -#else -# include "ansi_stdlib.h" -#endif - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "readline.h" -#include "rlprivate.h" -#include "xmalloc.h" - -/* Private data for callback registration functions. See comments in - rl_callback_read_char for more details. */ -_rl_callback_func_t *_rl_callback_func = 0; -_rl_callback_generic_arg *_rl_callback_data = 0; - -/* Applications can set this to non-zero to have readline's signal handlers - installed during the entire duration of reading a complete line, as in - readline-6.2. This should be used with care, because it can result in - readline receiving signals and not handling them until it's called again - via rl_callback_read_char, thereby stealing them from the application. - By default, signal handlers are only active while readline is active. */ -int rl_persistent_signal_handlers = 0; - -/* **************************************************************** */ -/* */ -/* Callback Readline Functions */ -/* */ -/* **************************************************************** */ - -/* Allow using readline in situations where a program may have multiple - things to handle at once, and dispatches them via select(). Call - rl_callback_handler_install() with the prompt and a function to call - whenever a complete line of input is ready. The user must then - call rl_callback_read_char() every time some input is available, and - rl_callback_read_char() will call the user's function with the complete - text read in at each end of line. The terminal is kept prepped - all the time, except during calls to the user's function. Signal - handlers are only installed when the application calls back into - readline, so readline doesn't `steal' signals from the application. */ - -rl_vcpfunc_t *rl_linefunc; /* user callback function */ -static int in_handler; /* terminal_prepped and signals set? */ - -/* Make sure the terminal is set up, initialize readline, and prompt. */ -static void -_rl_callback_newline (void) -{ - rl_initialize (); - - if (in_handler == 0) - { - in_handler = 1; - - if (rl_prep_term_function) - (*rl_prep_term_function) (_rl_meta_flag); - -#if defined (HANDLE_SIGNALS) - if (rl_persistent_signal_handlers) - rl_set_signals (); -#endif - } - - readline_internal_setup (); - RL_CHECK_SIGNALS (); -} - -/* Install a readline handler, set up the terminal, and issue the prompt. */ -void -rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *linefunc) -{ - rl_set_prompt (prompt); - RL_SETSTATE (RL_STATE_CALLBACK); - rl_linefunc = linefunc; - _rl_callback_newline (); -} - -#if defined (HANDLE_SIGNALS) -#define CALLBACK_READ_RETURN() \ - do { \ - if (rl_persistent_signal_handlers == 0) \ - rl_clear_signals (); \ - return; \ - } while (0) -#else -#define CALLBACK_READ_RETURN() return -#endif - -/* Read one character, and dispatch to the handler if it ends the line. */ -void -rl_callback_read_char (void) -{ - char *line; - int eof, jcode; - static procenv_t olevel; - - if (rl_linefunc == NULL) - { - _rl_errmsg ("readline_callback_read_char() called with no handler!"); - abort (); - } - - memcpy ((void *)olevel, (void *)_rl_top_level, sizeof (procenv_t)); -#if defined (HAVE_POSIX_SIGSETJMP) - jcode = sigsetjmp (_rl_top_level, 0); -#else - jcode = setjmp (_rl_top_level); -#endif - if (jcode) - { - (*rl_redisplay_function) (); - _rl_want_redisplay = 0; - memcpy ((void *)_rl_top_level, (void *)olevel, sizeof (procenv_t)); - CALLBACK_READ_RETURN (); - } - -#if defined (HANDLE_SIGNALS) - /* Install signal handlers only when readline has control. */ - if (rl_persistent_signal_handlers == 0) - rl_set_signals (); -#endif - - do - { - RL_CHECK_SIGNALS (); - if (RL_ISSTATE (RL_STATE_ISEARCH)) - { - eof = _rl_isearch_callback (_rl_iscxt); - if (eof == 0 && (RL_ISSTATE (RL_STATE_ISEARCH) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING)) - rl_callback_read_char (); - - CALLBACK_READ_RETURN (); - } - else if (RL_ISSTATE (RL_STATE_NSEARCH)) - { - eof = _rl_nsearch_callback (_rl_nscxt); - - CALLBACK_READ_RETURN (); - } -#if defined (VI_MODE) - /* States that can occur while in state VIMOTION have to be checked - before RL_STATE_VIMOTION */ - else if (RL_ISSTATE (RL_STATE_CHARSEARCH)) - { - int k; - - k = _rl_callback_data->i2; - - eof = (*_rl_callback_func) (_rl_callback_data); - /* If the function `deregisters' itself, make sure the data is - cleaned up. */ - if (_rl_callback_func == 0) /* XXX - just sanity check */ - { - if (_rl_callback_data) - { - _rl_callback_data_dispose (_rl_callback_data); - _rl_callback_data = 0; - } - } - - /* Messy case where vi motion command can be char search */ - if (RL_ISSTATE (RL_STATE_VIMOTION)) - { - _rl_vi_domove_motion_cleanup (k, _rl_vimvcxt); - _rl_internal_char_cleanup (); - CALLBACK_READ_RETURN (); - } - - _rl_internal_char_cleanup (); - } - else if (RL_ISSTATE (RL_STATE_VIMOTION)) - { - eof = _rl_vi_domove_callback (_rl_vimvcxt); - /* Should handle everything, including cleanup, numeric arguments, - and turning off RL_STATE_VIMOTION */ - if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) - _rl_internal_char_cleanup (); - - CALLBACK_READ_RETURN (); - } -#endif - else if (RL_ISSTATE (RL_STATE_NUMERICARG)) - { - eof = _rl_arg_callback (_rl_argcxt); - if (eof == 0 && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING)) - rl_callback_read_char (); - /* XXX - this should handle _rl_last_command_was_kill better */ - else if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) - _rl_internal_char_cleanup (); - - CALLBACK_READ_RETURN (); - } - else if (RL_ISSTATE (RL_STATE_MULTIKEY)) - { - eof = _rl_dispatch_callback (_rl_kscxt); /* For now */ - while ((eof == -1 || eof == -2) && RL_ISSTATE (RL_STATE_MULTIKEY) && _rl_kscxt && (_rl_kscxt->flags & KSEQ_DISPATCHED)) - eof = _rl_dispatch_callback (_rl_kscxt); - if (RL_ISSTATE (RL_STATE_MULTIKEY) == 0) - { - _rl_internal_char_cleanup (); - _rl_want_redisplay = 1; - } - } - else if (_rl_callback_func) - { - /* This allows functions that simply need to read an additional - character (like quoted-insert) to register a function to be - called when input is available. _rl_callback_data is a - pointer to a struct that has the argument count originally - passed to the registering function and space for any additional - parameters. */ - eof = (*_rl_callback_func) (_rl_callback_data); - /* If the function `deregisters' itself, make sure the data is - cleaned up. */ - if (_rl_callback_func == 0) - { - if (_rl_callback_data) - { - _rl_callback_data_dispose (_rl_callback_data); - _rl_callback_data = 0; - } - _rl_internal_char_cleanup (); - } - } - else - eof = readline_internal_char (); - - RL_CHECK_SIGNALS (); - if (rl_done == 0 && _rl_want_redisplay) - { - (*rl_redisplay_function) (); - _rl_want_redisplay = 0; - } - - if (rl_done) - { - line = readline_internal_teardown (eof); - - if (rl_deprep_term_function) - (*rl_deprep_term_function) (); -#if defined (HANDLE_SIGNALS) - rl_clear_signals (); -#endif - in_handler = 0; - (*rl_linefunc) (line); - - /* If the user did not clear out the line, do it for him. */ - if (rl_line_buffer[0]) - _rl_init_line_state (); - - /* Redisplay the prompt if readline_handler_{install,remove} - not called. */ - if (in_handler == 0 && rl_linefunc) - _rl_callback_newline (); - } - } - while (rl_pending_input || _rl_pushed_input_available () || RL_ISSTATE (RL_STATE_MACROINPUT)); - - CALLBACK_READ_RETURN (); -} - -/* Remove the handler, and make sure the terminal is in its normal state. */ -void -rl_callback_handler_remove (void) -{ - rl_linefunc = NULL; - RL_UNSETSTATE (RL_STATE_CALLBACK); - RL_CHECK_SIGNALS (); - if (in_handler) - { - in_handler = 0; - if (rl_deprep_term_function) - (*rl_deprep_term_function) (); -#if defined (HANDLE_SIGNALS) - rl_clear_signals (); -#endif - } -} - -_rl_callback_generic_arg * -_rl_callback_data_alloc (int count) -{ - _rl_callback_generic_arg *arg; - - arg = (_rl_callback_generic_arg *)xmalloc (sizeof (_rl_callback_generic_arg)); - arg->count = count; - - arg->i1 = arg->i2 = 0; - - return arg; -} - -void -_rl_callback_data_dispose (_rl_callback_generic_arg *arg) -{ - xfree (arg); -} - -/* Make sure that this agrees with cases in rl_callback_read_char */ -void -rl_callback_sigcleanup (void) -{ - if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) - return; - - if (RL_ISSTATE (RL_STATE_ISEARCH)) - _rl_isearch_cleanup (_rl_iscxt, 0); - else if (RL_ISSTATE (RL_STATE_NSEARCH)) - _rl_nsearch_cleanup (_rl_nscxt, 0); - else if (RL_ISSTATE (RL_STATE_VIMOTION)) - RL_UNSETSTATE (RL_STATE_VIMOTION); - else if (RL_ISSTATE (RL_STATE_NUMERICARG)) - { - _rl_argcxt = 0; - RL_UNSETSTATE (RL_STATE_NUMERICARG); - } - else if (RL_ISSTATE (RL_STATE_MULTIKEY)) - RL_UNSETSTATE (RL_STATE_MULTIKEY); - if (RL_ISSTATE (RL_STATE_CHARSEARCH)) - RL_UNSETSTATE (RL_STATE_CHARSEARCH); - - _rl_callback_func = 0; -} -#endif diff --git a/readline/chardefs.h b/readline/chardefs.h deleted file mode 100644 index 3cf1326aab..0000000000 --- a/readline/chardefs.h +++ /dev/null @@ -1,164 +0,0 @@ -/* chardefs.h -- Character definitions for readline. */ - -/* Copyright (C) 1994-2015 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#ifndef _CHARDEFS_H_ -#define _CHARDEFS_H_ - -#include - -#if defined (HAVE_CONFIG_H) -# if defined (HAVE_STRING_H) -# if ! defined (STDC_HEADERS) && defined (HAVE_MEMORY_H) -# include -# endif -# include -# endif /* HAVE_STRING_H */ -# if defined (HAVE_STRINGS_H) -# include -# endif /* HAVE_STRINGS_H */ -#else -# include -#endif /* !HAVE_CONFIG_H */ - -#ifndef whitespace -#define whitespace(c) (((c) == ' ') || ((c) == '\t')) -#endif - -#ifdef CTRL -# undef CTRL -#endif -#ifdef UNCTRL -# undef UNCTRL -#endif - -/* Some character stuff. */ -#define control_character_threshold 0x020 /* Smaller than this is control. */ -#define control_character_mask 0x1f /* 0x20 - 1 */ -#define meta_character_threshold 0x07f /* Larger than this is Meta. */ -#define control_character_bit 0x40 /* 0x000000, must be off. */ -#define meta_character_bit 0x080 /* x0000000, must be on. */ -#define largest_char 255 /* Largest character value. */ - -#define CTRL_CHAR(c) ((c) < control_character_threshold && (((c) & 0x80) == 0)) -#define META_CHAR(c) ((c) > meta_character_threshold && (c) <= largest_char) - -#define CTRL(c) ((c) & control_character_mask) -#define META(c) ((c) | meta_character_bit) - -#define UNMETA(c) ((c) & (~meta_character_bit)) -#define UNCTRL(c) _rl_to_upper(((c)|control_character_bit)) - -#if defined STDC_HEADERS || (!defined (isascii) && !defined (HAVE_ISASCII)) -# define IN_CTYPE_DOMAIN(c) 1 -#else -# define IN_CTYPE_DOMAIN(c) isascii(c) -#endif - -#if !defined (isxdigit) && !defined (HAVE_ISXDIGIT) && !defined (__cplusplus) -# define isxdigit(c) (isdigit((unsigned char)(c)) || ((c) >= 'a' && (c) <= 'f') || ((c) >= 'A' && (c) <= 'F')) -#endif - -#if defined (CTYPE_NON_ASCII) -# define NON_NEGATIVE(c) 1 -#else -# define NON_NEGATIVE(c) ((unsigned char)(c) == (c)) -#endif - -/* Some systems define these; we want our definitions. */ -#undef ISPRINT - -/* Beware: these only work with single-byte ASCII characters. */ - -#define ISALNUM(c) (IN_CTYPE_DOMAIN (c) && isalnum ((unsigned char)c)) -#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha ((unsigned char)c)) -#define ISDIGIT(c) (IN_CTYPE_DOMAIN (c) && isdigit ((unsigned char)c)) -#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower ((unsigned char)c)) -#define ISPRINT(c) (IN_CTYPE_DOMAIN (c) && isprint ((unsigned char)c)) -#define ISUPPER(c) (IN_CTYPE_DOMAIN (c) && isupper ((unsigned char)c)) -#define ISXDIGIT(c) (IN_CTYPE_DOMAIN (c) && isxdigit ((unsigned char)c)) - -#define _rl_lowercase_p(c) (NON_NEGATIVE(c) && ISLOWER(c)) -#define _rl_uppercase_p(c) (NON_NEGATIVE(c) && ISUPPER(c)) -#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') - -#define _rl_pure_alphabetic(c) (NON_NEGATIVE(c) && ISALPHA(c)) -#define ALPHABETIC(c) (NON_NEGATIVE(c) && ISALNUM(c)) - -#ifndef _rl_to_upper -# define _rl_to_upper(c) (_rl_lowercase_p(c) ? toupper((unsigned char)c) : (c)) -# define _rl_to_lower(c) (_rl_uppercase_p(c) ? tolower((unsigned char)c) : (c)) -#endif - -#ifndef _rl_digit_value -# define _rl_digit_value(x) ((x) - '0') -#endif - -#ifndef _rl_isident -# define _rl_isident(c) (ISALNUM(c) || (c) == '_') -#endif - -#ifndef ISOCTAL -# define ISOCTAL(c) ((c) >= '0' && (c) <= '7') -#endif -#define OCTVALUE(c) ((c) - '0') - -#define HEXVALUE(c) \ - (((c) >= 'a' && (c) <= 'f') \ - ? (c)-'a'+10 \ - : (c) >= 'A' && (c) <= 'F' ? (c)-'A'+10 : (c)-'0') - -#ifndef NEWLINE -#define NEWLINE '\n' -#endif - -#ifndef RETURN -#define RETURN CTRL('M') -#endif - -#ifndef RUBOUT -#define RUBOUT 0x7f -#endif - -#ifndef TAB -#define TAB '\t' -#endif - -#ifdef ABORT_CHAR -#undef ABORT_CHAR -#endif -#define ABORT_CHAR CTRL('G') - -#ifdef PAGE -#undef PAGE -#endif -#define PAGE CTRL('L') - -#ifdef SPACE -#undef SPACE -#endif -#define SPACE ' ' /* XXX - was 0x20 */ - -#ifdef ESC -#undef ESC -#endif -#define ESC CTRL('[') - -#endif /* _CHARDEFS_H_ */ diff --git a/readline/colors.c b/readline/colors.c deleted file mode 100644 index 81aecfe0c8..0000000000 --- a/readline/colors.c +++ /dev/null @@ -1,294 +0,0 @@ -/* `dir', `vdir' and `ls' directory listing programs for GNU. - - Modified by Chet Ramey for Readline. - - Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015, 2017 - Free Software Foundation, Inc. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* Written by Richard Stallman and David MacKenzie. */ - -/* Color support by Peter Anvin and Dennis - Flaherty based on original patches by - Greg Lee . */ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include "rlconf.h" - -#include - -#include "posixstat.h" // stat related macros (S_ISREG, ...) -#include // S_ISUID - -#ifndef S_ISDIR -# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) -#endif - -// strlen() -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -// abort() -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include "readline.h" -#include "rldefs.h" - -#ifdef COLOR_SUPPORT - -#include "xmalloc.h" -#include "colors.h" - -static bool is_colored (enum indicator_no type); -static void restore_default_color (void); - -COLOR_EXT_TYPE *_rl_color_ext_list = 0; - -/* Output a color indicator (which may contain nulls). */ -void -_rl_put_indicator (const struct bin_str *ind) -{ - fwrite (ind->string, ind->len, 1, rl_outstream); -} - -static bool -is_colored (enum indicator_no colored_filetype) -{ - size_t len = _rl_color_indicator[colored_filetype].len; - char const *s = _rl_color_indicator[colored_filetype].string; - return ! (len == 0 - || (len == 1 && strncmp (s, "0", 1) == 0) - || (len == 2 && strncmp (s, "00", 2) == 0)); -} - -static void -restore_default_color (void) -{ - _rl_put_indicator (&_rl_color_indicator[C_LEFT]); - _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); -} - -void -_rl_set_normal_color (void) -{ - if (is_colored (C_NORM)) - { - _rl_put_indicator (&_rl_color_indicator[C_LEFT]); - _rl_put_indicator (&_rl_color_indicator[C_NORM]); - _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); - } -} - -bool -_rl_print_prefix_color (void) -{ - struct bin_str *s; - - /* What do we want to use for the prefix? Let's try cyan first, see colors.h */ - s = &_rl_color_indicator[C_PREFIX]; - if (s->string != NULL) - { - if (is_colored (C_NORM)) - restore_default_color (); - _rl_put_indicator (&_rl_color_indicator[C_LEFT]); - _rl_put_indicator (s); - _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); - return 0; - } - else - return 1; -} - -/* Returns whether any color sequence was printed. */ -bool -_rl_print_color_indicator (const char *f) -{ - enum indicator_no colored_filetype; - COLOR_EXT_TYPE *ext; /* Color extension */ - size_t len; /* Length of name */ - - const char* name; - char *filename; - struct stat astat, linkstat; - mode_t mode; - int linkok; /* 1 == ok, 0 == dangling symlink, -1 == missing */ - int stat_ok; - - name = f; - - /* This should already have undergone tilde expansion */ - filename = 0; - if (rl_filename_stat_hook) - { - filename = savestring (f); - (*rl_filename_stat_hook) (&filename); - name = filename; - } - -#if defined (HAVE_LSTAT) - stat_ok = lstat(name, &astat); -#else - stat_ok = stat(name, &astat); -#endif - if (stat_ok == 0) - { - mode = astat.st_mode; -#if defined (HAVE_LSTAT) - if (S_ISLNK (mode)) - { - linkok = stat (name, &linkstat) == 0; - if (linkok && strncmp (_rl_color_indicator[C_LINK].string, "target", 6) == 0) - mode = linkstat.st_mode; - } - else -#endif - linkok = 1; - } - else - linkok = -1; - - /* Is this a nonexistent file? If so, linkok == -1. */ - - if (linkok == -1 && _rl_color_indicator[C_MISSING].string != NULL) - colored_filetype = C_MISSING; - else if (linkok == 0 && _rl_color_indicator[C_ORPHAN].string != NULL) - colored_filetype = C_ORPHAN; /* dangling symlink */ - else if(stat_ok != 0) - { - static enum indicator_no filetype_indicator[] = FILETYPE_INDICATORS; - colored_filetype = filetype_indicator[normal]; //f->filetype]; - } - else - { - if (S_ISREG (mode)) - { - colored_filetype = C_FILE; - -#if defined (S_ISUID) - if ((mode & S_ISUID) != 0 && is_colored (C_SETUID)) - colored_filetype = C_SETUID; - else -#endif -#if defined (S_ISGID) - if ((mode & S_ISGID) != 0 && is_colored (C_SETGID)) - colored_filetype = C_SETGID; - else -#endif - if (is_colored (C_CAP) && 0) //f->has_capability) - colored_filetype = C_CAP; - else if ((mode & S_IXUGO) != 0 && is_colored (C_EXEC)) - colored_filetype = C_EXEC; - else if ((1 < astat.st_nlink) && is_colored (C_MULTIHARDLINK)) - colored_filetype = C_MULTIHARDLINK; - } - else if (S_ISDIR (mode)) - { - colored_filetype = C_DIR; - -#if defined (S_ISVTX) - if ((mode & S_ISVTX) && (mode & S_IWOTH) - && is_colored (C_STICKY_OTHER_WRITABLE)) - colored_filetype = C_STICKY_OTHER_WRITABLE; - else -#endif - if ((mode & S_IWOTH) != 0 && is_colored (C_OTHER_WRITABLE)) - colored_filetype = C_OTHER_WRITABLE; -#if defined (S_ISVTX) - else if ((mode & S_ISVTX) != 0 && is_colored (C_STICKY)) - colored_filetype = C_STICKY; -#endif - } -#if defined (S_ISLNK) - else if (S_ISLNK (mode)) - colored_filetype = C_LINK; -#endif - else if (S_ISFIFO (mode)) - colored_filetype = C_FIFO; -#if defined (S_ISSOCK) - else if (S_ISSOCK (mode)) - colored_filetype = C_SOCK; -#endif - else if (S_ISBLK (mode)) - colored_filetype = C_BLK; - else if (S_ISCHR (mode)) - colored_filetype = C_CHR; - else - { - /* Classify a file of some other type as C_ORPHAN. */ - colored_filetype = C_ORPHAN; - } - } - - /* Check the file's suffix only if still classified as C_FILE. */ - ext = NULL; - if (colored_filetype == C_FILE) - { - /* Test if NAME has a recognized suffix. */ - len = strlen (name); - name += len; /* Pointer to final \0. */ - for (ext = _rl_color_ext_list; ext != NULL; ext = ext->next) - { - if (ext->ext.len <= len - && strncmp (name - ext->ext.len, ext->ext.string, - ext->ext.len) == 0) - break; - } - } - - free (filename); /* NULL or savestring return value */ - - { - const struct bin_str *const s - = ext ? &(ext->seq) : &_rl_color_indicator[colored_filetype]; - if (s->string != NULL) - { - /* Need to reset so not dealing with attribute combinations */ - if (is_colored (C_NORM)) - restore_default_color (); - _rl_put_indicator (&_rl_color_indicator[C_LEFT]); - _rl_put_indicator (s); - _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); - return 0; - } - else - return 1; - } -} - -void -_rl_prep_non_filename_text (void) -{ - if (_rl_color_indicator[C_END].string != NULL) - _rl_put_indicator (&_rl_color_indicator[C_END]); - else - { - _rl_put_indicator (&_rl_color_indicator[C_LEFT]); - _rl_put_indicator (&_rl_color_indicator[C_RESET]); - _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); - } -} -#endif /* COLOR_SUPPORT */ diff --git a/readline/colors.h b/readline/colors.h deleted file mode 100644 index 6561ad90c1..0000000000 --- a/readline/colors.h +++ /dev/null @@ -1,126 +0,0 @@ -/* `dir', `vdir' and `ls' directory listing programs for GNU. - - Modified by Chet Ramey for Readline. - - Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015 - Free Software Foundation, Inc. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* Written by Richard Stallman and David MacKenzie. */ - -/* Color support by Peter Anvin and Dennis - Flaherty based on original patches by - Greg Lee . */ - -#ifndef _COLORS_H_ -#define _COLORS_H_ - -#include // size_t - -#if defined(__TANDEM) && defined(HAVE_STDBOOL_H) && (__STDC_VERSION__ < 199901L) -typedef int _Bool; -#endif - -#if defined (HAVE_STDBOOL_H) -# include // bool -#else -typedef int _rl_bool_t; - -#ifdef bool -# undef bool -#endif -#define bool _rl_bool_t - -#ifndef true -# define true 1 -# define false 0 -#endif - -#endif /* !HAVE_STDBOOL_H */ - -/* Null is a valid character in a color indicator (think about Epson - printers, for example) so we have to use a length/buffer string - type. */ -struct bin_str - { - size_t len; - const char *string; - }; - -/* file type indicators (dir, sock, fifo, ...) - Default value is initialized in parse-colors.c. - It is then modified from the values of $LS_COLORS. */ -extern struct bin_str _rl_color_indicator[]; - -/* The LS_COLORS variable is in a termcap-like format. */ -typedef struct _color_ext_type - { - struct bin_str ext; /* The extension we're looking for */ - struct bin_str seq; /* The sequence to output when we do */ - struct _color_ext_type *next; /* Next in list */ - } COLOR_EXT_TYPE; - -/* file extensions indicators (.txt, .log, .jpg, ...) - Values are taken from $LS_COLORS in rl_parse_colors(). */ -extern COLOR_EXT_TYPE *_rl_color_ext_list; - -#define FILETYPE_INDICATORS \ - { \ - C_ORPHAN, C_FIFO, C_CHR, C_DIR, C_BLK, C_FILE, \ - C_LINK, C_SOCK, C_FILE, C_DIR \ - } - -/* Whether we used any colors in the output so far. If so, we will - need to restore the default color later. If not, we will need to - call prep_non_filename_text before using color for the first time. */ - -enum indicator_no - { - C_LEFT, C_RIGHT, C_END, C_RESET, C_NORM, C_FILE, C_DIR, C_LINK, - C_FIFO, C_SOCK, - C_BLK, C_CHR, C_MISSING, C_ORPHAN, C_EXEC, C_DOOR, C_SETUID, C_SETGID, - C_STICKY, C_OTHER_WRITABLE, C_STICKY_OTHER_WRITABLE, C_CAP, C_MULTIHARDLINK, - C_CLR_TO_EOL - }; - - -#if !S_IXUGO -# define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) -#endif - -enum filetype - { - unknown, - fifo, - chardev, - directory, - blockdev, - normal, - symbolic_link, - sock, - whiteout, - arg_directory - }; - -/* Prefix color, currently same as socket */ -#define C_PREFIX C_SOCK - -extern void _rl_put_indicator (const struct bin_str *ind); -extern void _rl_set_normal_color (void); -extern bool _rl_print_prefix_color (void); -extern bool _rl_print_color_indicator (const char *f); -extern void _rl_prep_non_filename_text (void); - -#endif /* !_COLORS_H_ */ diff --git a/readline/compat.c b/readline/compat.c deleted file mode 100644 index 3ade3629ae..0000000000 --- a/readline/compat.c +++ /dev/null @@ -1,106 +0,0 @@ -/* compat.c -- backwards compatibility functions. */ - -/* Copyright (C) 2000-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#include "rlstdc.h" -#include "rltypedefs.h" - -extern void rl_free_undo_list PARAMS((void)); -extern int rl_maybe_save_line PARAMS((void)); -extern int rl_maybe_unsave_line PARAMS((void)); -extern int rl_maybe_replace_line PARAMS((void)); - -extern int rl_crlf PARAMS((void)); -extern int rl_ding PARAMS((void)); -extern int rl_alphabetic PARAMS((int)); - -extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *)); -extern char *rl_username_completion_function PARAMS((const char *, int)); -extern char *rl_filename_completion_function PARAMS((const char *, int)); - -/* Provide backwards-compatible entry points for old function names. */ - -void -free_undo_list (void) -{ - rl_free_undo_list (); -} - -int -maybe_replace_line (void) -{ - return rl_maybe_replace_line (); -} - -int -maybe_save_line (void) -{ - return rl_maybe_save_line (); -} - -int -maybe_unsave_line (void) -{ - return rl_maybe_unsave_line (); -} - -int -ding (void) -{ - return rl_ding (); -} - -int -crlf (void) -{ - return rl_crlf (); -} - -int -alphabetic (int c) -{ - return rl_alphabetic (c); -} - -char ** -completion_matches (const char *s, rl_compentry_func_t *f) -{ - return rl_completion_matches (s, f); -} - -char * -username_completion_function (const char *s, int i) -{ - return rl_username_completion_function (s, i); -} - -char * -filename_completion_function (const char *s, int i) -{ - return rl_filename_completion_function (s, i); -} diff --git a/readline/complete.c b/readline/complete.c deleted file mode 100644 index adce0d69ac..0000000000 --- a/readline/complete.c +++ /dev/null @@ -1,2958 +0,0 @@ -/* complete.c -- filename completion for readline. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#if defined (HAVE_SYS_FILE_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -#include -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -#if defined (HAVE_PWD_H) -#include -#endif - -#include "posixdir.h" -#include "posixstat.h" - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "xmalloc.h" -#include "rlprivate.h" - -#if defined (COLOR_SUPPORT) -# include "colors.h" -#endif - -#ifdef __STDC__ -typedef int QSFUNC (const void *, const void *); -#else -typedef int QSFUNC (); -#endif - -#ifdef HAVE_LSTAT -# define LSTAT lstat -#else -# define LSTAT stat -#endif - -/* Unix version of a hidden file. Could be different on other systems. */ -#define HIDDEN_FILE(fname) ((fname)[0] == '.') - -/* Most systems don't declare getpwent in if _POSIX_SOURCE is - defined. */ -#if defined (HAVE_GETPWENT) && (!defined (HAVE_GETPW_DECLS) || defined (_POSIX_SOURCE)) -extern struct passwd *getpwent PARAMS((void)); -#endif /* HAVE_GETPWENT && (!HAVE_GETPW_DECLS || _POSIX_SOURCE) */ - -/* If non-zero, then this is the address of a function to call when - completing a word would normally display the list of possible matches. - This function is called instead of actually doing the display. - It takes three arguments: (char **matches, int num_matches, int max_length) - where MATCHES is the array of strings that matched, NUM_MATCHES is the - number of strings in that array, and MAX_LENGTH is the length of the - longest string in that array. */ -rl_compdisp_func_t *rl_completion_display_matches_hook = (rl_compdisp_func_t *)NULL; - -#if defined (VISIBLE_STATS) || defined (COLOR_SUPPORT) -# if !defined (X_OK) -# define X_OK 1 -# endif -#endif - -#if defined (VISIBLE_STATS) -static int stat_char PARAMS((char *)); -#endif - -#if defined (COLOR_SUPPORT) -static int colored_stat_start PARAMS((const char *)); -static void colored_stat_end PARAMS((void)); -static int colored_prefix_start PARAMS((void)); -static void colored_prefix_end PARAMS((void)); -#endif - -static int path_isdir PARAMS((const char *)); - -static char *rl_quote_filename PARAMS((char *, int, char *)); - -static void _rl_complete_sigcleanup PARAMS((int, void *)); - -static void set_completion_defaults PARAMS((int)); -static int get_y_or_n PARAMS((int)); -static int _rl_internal_pager PARAMS((int)); -static char *printable_part PARAMS((char *)); -static int fnwidth PARAMS((const char *)); -static int fnprint PARAMS((const char *, int, const char *)); -static int print_filename PARAMS((char *, char *, int)); - -static char **gen_completion_matches PARAMS((char *, int, int, rl_compentry_func_t *, int, int)); - -static char **remove_duplicate_matches PARAMS((char **)); -static void insert_match PARAMS((char *, int, int, char *)); -static int append_to_match PARAMS((char *, int, int, int)); -static void insert_all_matches PARAMS((char **, int, char *)); -static int complete_fncmp PARAMS((const char *, int, const char *, int)); -static void display_matches PARAMS((char **)); -static int compute_lcd_of_matches PARAMS((char **, int, const char *)); -static int postprocess_matches PARAMS((char ***, int)); -static int complete_get_screenwidth PARAMS((void)); - -static char *make_quoted_replacement PARAMS((char *, int, char *)); - -/* **************************************************************** */ -/* */ -/* Completion matching, from readline's point of view. */ -/* */ -/* **************************************************************** */ - -/* Variables known only to the readline library. */ - -/* If non-zero, non-unique completions always show the list of matches. */ -int _rl_complete_show_all = 0; - -/* If non-zero, non-unique completions show the list of matches, unless it - is not possible to do partial completion and modify the line. */ -int _rl_complete_show_unmodified = 0; - -/* If non-zero, completed directory names have a slash appended. */ -int _rl_complete_mark_directories = 1; - -/* If non-zero, the symlinked directory completion behavior introduced in - readline-4.2a is disabled, and symlinks that point to directories have - a slash appended (subject to the value of _rl_complete_mark_directories). - This is user-settable via the mark-symlinked-directories variable. */ -int _rl_complete_mark_symlink_dirs = 0; - -/* If non-zero, completions are printed horizontally in alphabetical order, - like `ls -x'. */ -int _rl_print_completions_horizontally; - -/* Non-zero means that case is not significant in filename completion. */ -#if (defined (__MSDOS__) && !defined (__DJGPP__)) || (defined (_WIN32) && !defined (__CYGWIN__)) -int _rl_completion_case_fold = 1; -#else -int _rl_completion_case_fold = 0; -#endif - -/* Non-zero means that `-' and `_' are equivalent when comparing filenames - for completion. */ -int _rl_completion_case_map = 0; - -/* If zero, don't match hidden files (filenames beginning with a `.' on - Unix) when doing filename completion. */ -int _rl_match_hidden_files = 1; - -/* Length in characters of a common prefix replaced with an ellipsis (`...') - when displaying completion matches. Matches whose printable portion has - more than this number of displaying characters in common will have the common - display prefix replaced with an ellipsis. */ -int _rl_completion_prefix_display_length = 0; - -/* The readline-private number of screen columns to use when displaying - matches. If < 0 or > _rl_screenwidth, it is ignored. */ -int _rl_completion_columns = -1; - -#if defined (COLOR_SUPPORT) -/* Non-zero means to use colors to indicate file type when listing possible - completions. The colors used are taken from $LS_COLORS, if set. */ -int _rl_colored_stats = 0; - -/* Non-zero means to use a color (currently magenta) to indicate the common - prefix of a set of possible word completions. */ -int _rl_colored_completion_prefix = 0; -#endif - -/* If non-zero, when completing in the middle of a word, don't insert - characters from the match that match characters following point in - the word. This means, for instance, completing when the cursor is - after the `e' in `Makefile' won't result in `Makefilefile'. */ -int _rl_skip_completed_text = 0; - -/* If non-zero, menu completion displays the common prefix first in the - cycle of possible completions instead of the last. */ -int _rl_menu_complete_prefix_first = 0; - -/* Global variables available to applications using readline. */ - -#if defined (VISIBLE_STATS) -/* Non-zero means add an additional character to each filename displayed - during listing completion iff rl_filename_completion_desired which helps - to indicate the type of file being listed. */ -int rl_visible_stats = 0; -#endif /* VISIBLE_STATS */ - -/* If non-zero, then this is the address of a function to call when - completing on a directory name. The function is called with - the address of a string (the current directory name) as an arg. */ -rl_icppfunc_t *rl_directory_completion_hook = (rl_icppfunc_t *)NULL; - -rl_icppfunc_t *rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL; - -rl_icppfunc_t *rl_filename_stat_hook = (rl_icppfunc_t *)NULL; - -/* If non-zero, this is the address of a function to call when reading - directory entries from the filesystem for completion and comparing - them to the partial word to be completed. The function should - either return its first argument (if no conversion takes place) or - newly-allocated memory. This can, for instance, convert filenames - between character sets for comparison against what's typed at the - keyboard. The returned value is what is added to the list of - matches. The second argument is the length of the filename to be - converted. */ -rl_dequote_func_t *rl_filename_rewrite_hook = (rl_dequote_func_t *)NULL; - -/* Non-zero means readline completion functions perform tilde expansion. */ -int rl_complete_with_tilde_expansion = 0; - -/* Pointer to the generator function for completion_matches (). - NULL means to use rl_filename_completion_function (), the default filename - completer. */ -rl_compentry_func_t *rl_completion_entry_function = (rl_compentry_func_t *)NULL; - -/* Pointer to generator function for rl_menu_complete (). NULL means to use - *rl_completion_entry_function (see above). */ -rl_compentry_func_t *rl_menu_completion_entry_function = (rl_compentry_func_t *)NULL; - -/* Pointer to alternative function to create matches. - Function is called with TEXT, START, and END. - START and END are indices in RL_LINE_BUFFER saying what the boundaries - of TEXT are. - If this function exists and returns NULL then call the value of - rl_completion_entry_function to try to match, otherwise use the - array of strings returned. */ -rl_completion_func_t *rl_attempted_completion_function = (rl_completion_func_t *)NULL; - -/* Non-zero means to suppress normal filename completion after the - user-specified completion function has been called. */ -int rl_attempted_completion_over = 0; - -/* Set to a character indicating the type of completion being performed - by rl_complete_internal, available for use by application completion - functions. */ -int rl_completion_type = 0; - -/* Up to this many items will be displayed in response to a - possible-completions call. After that, we ask the user if - she is sure she wants to see them all. A negative value means - don't ask. */ -int rl_completion_query_items = 100; - -int _rl_page_completions = 1; - -/* The basic list of characters that signal a break between words for the - completer routine. The contents of this variable is what breaks words - in the shell, i.e. " \t\n\"\\'`@$><=" */ -const char *rl_basic_word_break_characters = " \t\n\"\\'`@$><=;|&{("; /* }) */ - -/* List of basic quoting characters. */ -const char *rl_basic_quote_characters = "\"'"; - -/* The list of characters that signal a break between words for - rl_complete_internal. The default list is the contents of - rl_basic_word_break_characters. */ -/*const*/ char *rl_completer_word_break_characters = (/*const*/ char *)NULL; - -/* Hook function to allow an application to set the completion word - break characters before readline breaks up the line. Allows - position-dependent word break characters. */ -rl_cpvfunc_t *rl_completion_word_break_hook = (rl_cpvfunc_t *)NULL; - -/* List of characters which can be used to quote a substring of the line. - Completion occurs on the entire substring, and within the substring - rl_completer_word_break_characters are treated as any other character, - unless they also appear within this list. */ -const char *rl_completer_quote_characters = (const char *)NULL; - -/* List of characters that should be quoted in filenames by the completer. */ -const char *rl_filename_quote_characters = (const char *)NULL; - -/* List of characters that are word break characters, but should be left - in TEXT when it is passed to the completion function. The shell uses - this to help determine what kind of completing to do. */ -const char *rl_special_prefixes = (const char *)NULL; - -/* If non-zero, then disallow duplicates in the matches. */ -int rl_ignore_completion_duplicates = 1; - -/* Non-zero means that the results of the matches are to be treated - as filenames. This is ALWAYS zero on entry, and can only be changed - within a completion entry finder function. */ -int rl_filename_completion_desired = 0; - -/* Non-zero means that the results of the matches are to be quoted using - double quotes (or an application-specific quoting mechanism) if the - filename contains any characters in rl_filename_quote_chars. This is - ALWAYS non-zero on entry, and can only be changed within a completion - entry finder function. */ -int rl_filename_quoting_desired = 1; - -/* This function, if defined, is called by the completer when real - filename completion is done, after all the matching names have been - generated. It is passed a (char**) known as matches in the code below. - It consists of a NULL-terminated array of pointers to potential - matching strings. The 1st element (matches[0]) is the maximal - substring that is common to all matches. This function can re-arrange - the list of matches as required, but all elements of the array must be - free()'d if they are deleted. The main intent of this function is - to implement FIGNORE a la SunOS csh. */ -rl_compignore_func_t *rl_ignore_some_completions_function = (rl_compignore_func_t *)NULL; - -/* Set to a function to quote a filename in an application-specific fashion. - Called with the text to quote, the type of match found (single or multiple) - and a pointer to the quoting character to be used, which the function can - reset if desired. */ -rl_quote_func_t *rl_filename_quoting_function = rl_quote_filename; - -/* Function to call to remove quoting characters from a filename. Called - before completion is attempted, so the embedded quotes do not interfere - with matching names in the file system. Readline doesn't do anything - with this; it's set only by applications. */ -rl_dequote_func_t *rl_filename_dequoting_function = (rl_dequote_func_t *)NULL; - -/* Function to call to decide whether or not a word break character is - quoted. If a character is quoted, it does not break words for the - completer. */ -rl_linebuf_func_t *rl_char_is_quoted_p = (rl_linebuf_func_t *)NULL; - -/* If non-zero, the completion functions don't append anything except a - possible closing quote. This is set to 0 by rl_complete_internal and - may be changed by an application-specific completion function. */ -int rl_completion_suppress_append = 0; - -/* Character appended to completed words when at the end of the line. The - default is a space. */ -int rl_completion_append_character = ' '; - -/* If non-zero, the completion functions don't append any closing quote. - This is set to 0 by rl_complete_internal and may be changed by an - application-specific completion function. */ -int rl_completion_suppress_quote = 0; - -/* Set to any quote character readline thinks it finds before any application - completion function is called. */ -int rl_completion_quote_character; - -/* Set to a non-zero value if readline found quoting anywhere in the word to - be completed; set before any application completion function is called. */ -int rl_completion_found_quote; - -/* If non-zero, a slash will be appended to completed filenames that are - symbolic links to directory names, subject to the value of the - mark-directories variable (which is user-settable). This exists so - that application completion functions can override the user's preference - (set via the mark-symlinked-directories variable) if appropriate. - It's set to the value of _rl_complete_mark_symlink_dirs in - rl_complete_internal before any application-specific completion - function is called, so without that function doing anything, the user's - preferences are honored. */ -int rl_completion_mark_symlink_dirs; - -/* If non-zero, inhibit completion (temporarily). */ -int rl_inhibit_completion; - -/* Set to the last key used to invoke one of the completion functions */ -int rl_completion_invoking_key; - -/* If non-zero, sort the completion matches. On by default. */ -int rl_sort_completion_matches = 1; - -/* Variables local to this file. */ - -/* Local variable states what happened during the last completion attempt. */ -static int completion_changed_buffer; - -/* The result of the query to the user about displaying completion matches */ -static int completion_y_or_n; - -static int _rl_complete_display_matches_interrupt = 0; - -/*************************************/ -/* */ -/* Bindable completion functions */ -/* */ -/*************************************/ - -/* Complete the word at or before point. You have supplied the function - that does the initial simple matching selection algorithm (see - rl_completion_matches ()). The default is to do filename completion. */ -int -rl_complete (int ignore, int invoking_key) -{ - rl_completion_invoking_key = invoking_key; - - if (rl_inhibit_completion) - return (_rl_insert_char (ignore, invoking_key)); - else if (rl_last_func == rl_complete && !completion_changed_buffer) - return (rl_complete_internal ('?')); - else if (_rl_complete_show_all) - return (rl_complete_internal ('!')); - else if (_rl_complete_show_unmodified) - return (rl_complete_internal ('@')); - else - return (rl_complete_internal (TAB)); -} - -/* List the possible completions. See description of rl_complete (). */ -int -rl_possible_completions (int ignore, int invoking_key) -{ - rl_completion_invoking_key = invoking_key; - return (rl_complete_internal ('?')); -} - -int -rl_insert_completions (int ignore, int invoking_key) -{ - rl_completion_invoking_key = invoking_key; - return (rl_complete_internal ('*')); -} - -/* Return the correct value to pass to rl_complete_internal performing - the same tests as rl_complete. This allows consecutive calls to an - application's completion function to list possible completions and for - an application-specific completion function to honor the - show-all-if-ambiguous readline variable. */ -int -rl_completion_mode (rl_command_func_t *cfunc) -{ - if (rl_last_func == cfunc && !completion_changed_buffer) - return '?'; - else if (_rl_complete_show_all) - return '!'; - else if (_rl_complete_show_unmodified) - return '@'; - else - return TAB; -} - -/************************************/ -/* */ -/* Completion utility functions */ -/* */ -/************************************/ - -/* Reset readline state on a signal or other event. */ -void -_rl_reset_completion_state (void) -{ - rl_completion_found_quote = 0; - rl_completion_quote_character = 0; -} - -static void -_rl_complete_sigcleanup (int sig, void *ptr) -{ - if (sig == SIGINT) /* XXX - for now */ - { - _rl_free_match_list ((char **)ptr); - _rl_complete_display_matches_interrupt = 1; - } -} - -/* Set default values for readline word completion. These are the variables - that application completion functions can change or inspect. */ -static void -set_completion_defaults (int what_to_do) -{ - /* Only the completion entry function can change these. */ - rl_filename_completion_desired = 0; - rl_filename_quoting_desired = 1; - rl_completion_type = what_to_do; - rl_completion_suppress_append = rl_completion_suppress_quote = 0; - rl_completion_append_character = ' '; - - /* The completion entry function may optionally change this. */ - rl_completion_mark_symlink_dirs = _rl_complete_mark_symlink_dirs; - - /* Reset private state. */ - _rl_complete_display_matches_interrupt = 0; -} - -/* The user must press "y" or "n". Non-zero return means "y" pressed. */ -static int -get_y_or_n (int for_pager) -{ - int c; - - /* For now, disable pager in callback mode, until we later convert to state - driven functions. Have to wait until next major version to add new - state definition, since it will change value of RL_STATE_DONE. */ -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - return 1; -#endif - - for (;;) - { - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (c == 'y' || c == 'Y' || c == ' ') - return (1); - if (c == 'n' || c == 'N' || c == RUBOUT) - return (0); - if (c == ABORT_CHAR || c < 0) - _rl_abort_internal (); - if (for_pager && (c == NEWLINE || c == RETURN)) - return (2); - if (for_pager && (c == 'q' || c == 'Q')) - return (0); - rl_ding (); - } -} - -static int -_rl_internal_pager (int lines) -{ - int i; - - fprintf (rl_outstream, "--More--"); - fflush (rl_outstream); - i = get_y_or_n (1); - _rl_erase_entire_line (); - if (i == 0) - return -1; - else if (i == 2) - return (lines - 1); - else - return 0; -} - -static int -path_isdir (const char *filename) -{ - struct stat finfo; - - return (stat (filename, &finfo) == 0 && S_ISDIR (finfo.st_mode)); -} - -#if defined (VISIBLE_STATS) -/* Return the character which best describes FILENAME. - `@' for symbolic links - `/' for directories - `*' for executables - `=' for sockets - `|' for FIFOs - `%' for character special devices - `#' for block special devices */ -static int -stat_char (char *filename) -{ - struct stat finfo; - int character, r; - char *f; - const char *fn; - - /* Short-circuit a //server on cygwin, since that will always behave as - a directory. */ -#if __CYGWIN__ - if (filename[0] == '/' && filename[1] == '/' && strchr (filename+2, '/') == 0) - return '/'; -#endif - - f = 0; - if (rl_filename_stat_hook) - { - f = savestring (filename); - (*rl_filename_stat_hook) (&f); - fn = f; - } - else - fn = filename; - -#if defined (HAVE_LSTAT) && defined (S_ISLNK) - r = lstat (fn, &finfo); -#else - r = stat (fn, &finfo); -#endif - - if (r == -1) - { - xfree (f); - return (0); - } - - character = 0; - if (S_ISDIR (finfo.st_mode)) - character = '/'; -#if defined (S_ISCHR) - else if (S_ISCHR (finfo.st_mode)) - character = '%'; -#endif /* S_ISCHR */ -#if defined (S_ISBLK) - else if (S_ISBLK (finfo.st_mode)) - character = '#'; -#endif /* S_ISBLK */ -#if defined (S_ISLNK) - else if (S_ISLNK (finfo.st_mode)) - character = '@'; -#endif /* S_ISLNK */ -#if defined (S_ISSOCK) - else if (S_ISSOCK (finfo.st_mode)) - character = '='; -#endif /* S_ISSOCK */ -#if defined (S_ISFIFO) - else if (S_ISFIFO (finfo.st_mode)) - character = '|'; -#endif - else if (S_ISREG (finfo.st_mode)) - { -#if defined (_WIN32) && !defined (__CYGWIN__) - char *ext; - - /* Windows doesn't do access and X_OK; check file extension instead */ - ext = strrchr (fn, '.'); - if (ext && (_rl_stricmp (ext, ".exe") == 0 || - _rl_stricmp (ext, ".cmd") == 0 || - _rl_stricmp (ext, ".bat") == 0 || - _rl_stricmp (ext, ".com") == 0)) - character = '*'; -#else - if (access (filename, X_OK) == 0) - character = '*'; -#endif - } - - xfree (f); - return (character); -} -#endif /* VISIBLE_STATS */ - -#if defined (COLOR_SUPPORT) -static int -colored_stat_start (const char *filename) -{ - _rl_set_normal_color (); - return (_rl_print_color_indicator (filename)); -} - -static void -colored_stat_end (void) -{ - _rl_prep_non_filename_text (); - _rl_put_indicator (&_rl_color_indicator[C_CLR_TO_EOL]); -} - -static int -colored_prefix_start (void) -{ - _rl_set_normal_color (); - return (_rl_print_prefix_color ()); -} - -static void -colored_prefix_end (void) -{ - colored_stat_end (); /* for now */ -} -#endif - -/* Return the portion of PATHNAME that should be output when listing - possible completions. If we are hacking filename completion, we - are only interested in the basename, the portion following the - final slash. Otherwise, we return what we were passed. Since - printing empty strings is not very informative, if we're doing - filename completion, and the basename is the empty string, we look - for the previous slash and return the portion following that. If - there's no previous slash, we just return what we were passed. */ -static char * -printable_part (char *pathname) -{ - char *temp, *x; - - if (rl_filename_completion_desired == 0) /* don't need to do anything */ - return (pathname); - - temp = strrchr (pathname, '/'); -#if defined (__MSDOS__) || defined (_WIN32) - if (temp == 0 && ISALPHA ((unsigned char)pathname[0]) && pathname[1] == ':') - temp = pathname + 1; -#endif - - if (temp == 0 || *temp == '\0') - return (pathname); - else if (temp[1] == 0 && temp == pathname) - return (pathname); - /* If the basename is NULL, we might have a pathname like '/usr/src/'. - Look for a previous slash and, if one is found, return the portion - following that slash. If there's no previous slash, just return the - pathname we were passed. */ - else if (temp[1] == '\0') - { - for (x = temp - 1; x > pathname; x--) - if (*x == '/') - break; - return ((*x == '/') ? x + 1 : pathname); - } - else - return ++temp; -} - -/* Compute width of STRING when displayed on screen by print_filename */ -static int -fnwidth (const char *string) -{ - int width, pos; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps; - int left, w; - size_t clen; - wchar_t wc; - - left = strlen (string) + 1; - memset (&ps, 0, sizeof (mbstate_t)); -#endif - - width = pos = 0; - while (string[pos]) - { - if (CTRL_CHAR (string[pos]) || string[pos] == RUBOUT) - { - width += 2; - pos++; - } - else - { -#if defined (HANDLE_MULTIBYTE) - clen = mbrtowc (&wc, string + pos, left - pos, &ps); - if (MB_INVALIDCH (clen)) - { - width++; - pos++; - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (clen)) - break; - else - { - pos += clen; - w = WCWIDTH (wc); - width += (w >= 0) ? w : 1; - } -#else - width++; - pos++; -#endif - } - } - - return width; -} - -#define ELLIPSIS_LEN 3 - -static int -fnprint (const char *to_print, int prefix_bytes, const char *real_pathname) -{ - int printed_len, w; - const char *s; - int common_prefix_len, print_len; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps; - const char *end; - size_t tlen; - int width; - wchar_t wc; - - print_len = strlen (to_print); - end = to_print + print_len + 1; - memset (&ps, 0, sizeof (mbstate_t)); -#else - print_len = strlen (to_print); -#endif - - printed_len = common_prefix_len = 0; - - /* Don't print only the ellipsis if the common prefix is one of the - possible completions. Only cut off prefix_bytes if we're going to be - printing the ellipsis, which takes precedence over coloring the - completion prefix (see print_filename() below). */ - if (_rl_completion_prefix_display_length > 0 && prefix_bytes >= print_len) - prefix_bytes = 0; - -#if defined (COLOR_SUPPORT) - if (_rl_colored_stats && (prefix_bytes == 0 || _rl_colored_completion_prefix <= 0)) - colored_stat_start (real_pathname); -#endif - - if (prefix_bytes && _rl_completion_prefix_display_length > 0) - { - char ellipsis; - - ellipsis = (to_print[prefix_bytes] == '.') ? '_' : '.'; - for (w = 0; w < ELLIPSIS_LEN; w++) - putc (ellipsis, rl_outstream); - printed_len = ELLIPSIS_LEN; - } -#if defined (COLOR_SUPPORT) - else if (prefix_bytes && _rl_colored_completion_prefix > 0) - { - common_prefix_len = prefix_bytes; - prefix_bytes = 0; - /* XXX - print color indicator start here */ - colored_prefix_start (); - } -#endif - - s = to_print + prefix_bytes; - while (*s) - { - if (CTRL_CHAR (*s)) - { - putc ('^', rl_outstream); - putc (UNCTRL (*s), rl_outstream); - printed_len += 2; - s++; -#if defined (HANDLE_MULTIBYTE) - memset (&ps, 0, sizeof (mbstate_t)); -#endif - } - else if (*s == RUBOUT) - { - putc ('^', rl_outstream); - putc ('?', rl_outstream); - printed_len += 2; - s++; -#if defined (HANDLE_MULTIBYTE) - memset (&ps, 0, sizeof (mbstate_t)); -#endif - } - else - { -#if defined (HANDLE_MULTIBYTE) - tlen = mbrtowc (&wc, s, end - s, &ps); - if (MB_INVALIDCH (tlen)) - { - tlen = 1; - width = 1; - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (tlen)) - break; - else - { - w = WCWIDTH (wc); - width = (w >= 0) ? w : 1; - } - fwrite (s, 1, tlen, rl_outstream); - s += tlen; - printed_len += width; -#else - putc (*s, rl_outstream); - s++; - printed_len++; -#endif - } - if (common_prefix_len > 0 && (s - to_print) >= common_prefix_len) - { -#if defined (COLOR_SUPPORT) - /* printed bytes = s - to_print */ - /* printed bytes should never be > but check for paranoia's sake */ - colored_prefix_end (); - if (_rl_colored_stats) - colored_stat_start (real_pathname); /* XXX - experiment */ -#endif - common_prefix_len = 0; - } - } - -#if defined (COLOR_SUPPORT) - /* XXX - unconditional for now */ - if (_rl_colored_stats) - colored_stat_end (); -#endif - - return printed_len; -} - -/* Output TO_PRINT to rl_outstream. If VISIBLE_STATS is defined and we - are using it, check for and output a single character for `special' - filenames. Return the number of characters we output. */ - -static int -print_filename (char *to_print, char *full_pathname, int prefix_bytes) -{ - int printed_len, extension_char, slen, tlen; - char *s, c, *new_full_pathname, *dn; - - extension_char = 0; -#if defined (COLOR_SUPPORT) - /* Defer printing if we want to prefix with a color indicator */ - if (_rl_colored_stats == 0 || rl_filename_completion_desired == 0) -#endif - printed_len = fnprint (to_print, prefix_bytes, to_print); - - if (rl_filename_completion_desired && ( -#if defined (VISIBLE_STATS) - rl_visible_stats || -#endif -#if defined (COLOR_SUPPORT) - _rl_colored_stats || -#endif - _rl_complete_mark_directories)) - { - /* If to_print != full_pathname, to_print is the basename of the - path passed. In this case, we try to expand the directory - name before checking for the stat character. */ - if (to_print != full_pathname) - { - /* Terminate the directory name. */ - c = to_print[-1]; - to_print[-1] = '\0'; - - /* If setting the last slash in full_pathname to a NUL results in - full_pathname being the empty string, we are trying to complete - files in the root directory. If we pass a null string to the - bash directory completion hook, for example, it will expand it - to the current directory. We just want the `/'. */ - if (full_pathname == 0 || *full_pathname == 0) - dn = "/"; - else if (full_pathname[0] != '/') - dn = full_pathname; - else if (full_pathname[1] == 0) - dn = "//"; /* restore trailing slash to `//' */ - else if (full_pathname[1] == '/' && full_pathname[2] == 0) - dn = "/"; /* don't turn /// into // */ - else - dn = full_pathname; - s = tilde_expand (dn); - if (rl_directory_completion_hook) - (*rl_directory_completion_hook) (&s); - - slen = strlen (s); - tlen = strlen (to_print); - new_full_pathname = (char *)xmalloc (slen + tlen + 2); - strcpy (new_full_pathname, s); - if (s[slen - 1] == '/') - slen--; - else - new_full_pathname[slen] = '/'; - strcpy (new_full_pathname + slen + 1, to_print); - -#if defined (VISIBLE_STATS) - if (rl_visible_stats) - extension_char = stat_char (new_full_pathname); - else -#endif - if (_rl_complete_mark_directories) - { - dn = 0; - if (rl_directory_completion_hook == 0 && rl_filename_stat_hook) - { - dn = savestring (new_full_pathname); - (*rl_filename_stat_hook) (&dn); - xfree (new_full_pathname); - new_full_pathname = dn; - } - if (path_isdir (new_full_pathname)) - extension_char = '/'; - } - - /* Move colored-stats code inside fnprint() */ -#if defined (COLOR_SUPPORT) - if (_rl_colored_stats) - printed_len = fnprint (to_print, prefix_bytes, new_full_pathname); -#endif - - xfree (new_full_pathname); - to_print[-1] = c; - } - else - { - s = tilde_expand (full_pathname); -#if defined (VISIBLE_STATS) - if (rl_visible_stats) - extension_char = stat_char (s); - else -#endif - if (_rl_complete_mark_directories && path_isdir (s)) - extension_char = '/'; - - /* Move colored-stats code inside fnprint() */ -#if defined (COLOR_SUPPORT) - if (_rl_colored_stats) - printed_len = fnprint (to_print, prefix_bytes, s); -#endif - } - - xfree (s); - if (extension_char) - { - putc (extension_char, rl_outstream); - printed_len++; - } - } - - return printed_len; -} - -static char * -rl_quote_filename (char *s, int rtype, char *qcp) -{ - char *r; - - r = (char *)xmalloc (strlen (s) + 2); - *r = *rl_completer_quote_characters; - strcpy (r + 1, s); - if (qcp) - *qcp = *rl_completer_quote_characters; - return r; -} - -/* Find the bounds of the current word for completion purposes, and leave - rl_point set to the end of the word. This function skips quoted - substrings (characters between matched pairs of characters in - rl_completer_quote_characters). First we try to find an unclosed - quoted substring on which to do matching. If one is not found, we use - the word break characters to find the boundaries of the current word. - We call an application-specific function to decide whether or not a - particular word break character is quoted; if that function returns a - non-zero result, the character does not break a word. This function - returns the opening quote character if we found an unclosed quoted - substring, '\0' otherwise. FP, if non-null, is set to a value saying - which (shell-like) quote characters we found (single quote, double - quote, or backslash) anywhere in the string. DP, if non-null, is set to - the value of the delimiter character that caused a word break. */ - -char -_rl_find_completion_word (int *fp, int *dp) -{ - int scan, end, found_quote, delimiter, pass_next, isbrk; - char quote_char, *brkchars; - - end = rl_point; - found_quote = delimiter = 0; - quote_char = '\0'; - - brkchars = 0; - if (rl_completion_word_break_hook) - brkchars = (*rl_completion_word_break_hook) (); - if (brkchars == 0) - brkchars = rl_completer_word_break_characters; - - if (rl_completer_quote_characters) - { - /* We have a list of characters which can be used in pairs to - quote substrings for the completer. Try to find the start - of an unclosed quoted substring. */ - /* FOUND_QUOTE is set so we know what kind of quotes we found. */ - for (scan = pass_next = 0; scan < end; scan = MB_NEXTCHAR (rl_line_buffer, scan, 1, MB_FIND_ANY)) - { - if (pass_next) - { - pass_next = 0; - continue; - } - - /* Shell-like semantics for single quotes -- don't allow backslash - to quote anything in single quotes, especially not the closing - quote. If you don't like this, take out the check on the value - of quote_char. */ - if (quote_char != '\'' && rl_line_buffer[scan] == '\\') - { - pass_next = 1; - found_quote |= RL_QF_BACKSLASH; - continue; - } - - if (quote_char != '\0') - { - /* Ignore everything until the matching close quote char. */ - if (rl_line_buffer[scan] == quote_char) - { - /* Found matching close. Abandon this substring. */ - quote_char = '\0'; - rl_point = end; - } - } - else if (strchr (rl_completer_quote_characters, rl_line_buffer[scan])) - { - /* Found start of a quoted substring. */ - quote_char = rl_line_buffer[scan]; - rl_point = scan + 1; - /* Shell-like quoting conventions. */ - if (quote_char == '\'') - found_quote |= RL_QF_SINGLE_QUOTE; - else if (quote_char == '"') - found_quote |= RL_QF_DOUBLE_QUOTE; - else - found_quote |= RL_QF_OTHER_QUOTE; - } - } - } - - if (rl_point == end && quote_char == '\0') - { - /* We didn't find an unclosed quoted substring upon which to do - completion, so use the word break characters to find the - substring on which to complete. */ - while (rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_ANY)) - { - scan = rl_line_buffer[rl_point]; - - if (strchr (brkchars, scan) == 0) - continue; - - /* Call the application-specific function to tell us whether - this word break character is quoted and should be skipped. */ - if (rl_char_is_quoted_p && found_quote && - (*rl_char_is_quoted_p) (rl_line_buffer, rl_point)) - continue; - - /* Convoluted code, but it avoids an n^2 algorithm with calls - to char_is_quoted. */ - break; - } - } - - /* If we are at an unquoted word break, then advance past it. */ - scan = rl_line_buffer[rl_point]; - - /* If there is an application-specific function to say whether or not - a character is quoted and we found a quote character, let that - function decide whether or not a character is a word break, even - if it is found in rl_completer_word_break_characters. Don't bother - if we're at the end of the line, though. */ - if (scan) - { - if (rl_char_is_quoted_p) - isbrk = (found_quote == 0 || - (*rl_char_is_quoted_p) (rl_line_buffer, rl_point) == 0) && - strchr (brkchars, scan) != 0; - else - isbrk = strchr (brkchars, scan) != 0; - - if (isbrk) - { - /* If the character that caused the word break was a quoting - character, then remember it as the delimiter. */ - if (rl_basic_quote_characters && - strchr (rl_basic_quote_characters, scan) && - (end - rl_point) > 1) - delimiter = scan; - - /* If the character isn't needed to determine something special - about what kind of completion to perform, then advance past it. */ - if (rl_special_prefixes == 0 || strchr (rl_special_prefixes, scan) == 0) - rl_point++; - } - } - - if (fp) - *fp = found_quote; - if (dp) - *dp = delimiter; - - return (quote_char); -} - -static char ** -gen_completion_matches (char *text, int start, int end, rl_compentry_func_t *our_func, int found_quote, int quote_char) -{ - char **matches; - - rl_completion_found_quote = found_quote; - rl_completion_quote_character = quote_char; - - /* If the user wants to TRY to complete, but then wants to give - up and use the default completion function, they set the - variable rl_attempted_completion_function. */ - if (rl_attempted_completion_function) - { - matches = (*rl_attempted_completion_function) (text, start, end); - if (RL_SIG_RECEIVED()) - { - _rl_free_match_list (matches); - matches = 0; - RL_CHECK_SIGNALS (); - } - - if (matches || rl_attempted_completion_over) - { - rl_attempted_completion_over = 0; - return (matches); - } - } - - /* XXX -- filename dequoting moved into rl_filename_completion_function */ - - /* rl_completion_matches will check for signals as well to avoid a long - delay while reading a directory. */ - matches = rl_completion_matches (text, our_func); - if (RL_SIG_RECEIVED()) - { - _rl_free_match_list (matches); - matches = 0; - RL_CHECK_SIGNALS (); - } - return matches; -} - -/* Filter out duplicates in MATCHES. This frees up the strings in - MATCHES. */ -static char ** -remove_duplicate_matches (char **matches) -{ - char *lowest_common; - int i, j, newlen; - char dead_slot; - char **temp_array; - - /* Sort the items. */ - for (i = 0; matches[i]; i++) - ; - - /* Sort the array without matches[0], since we need it to - stay in place no matter what. */ - if (i && rl_sort_completion_matches) - qsort (matches+1, i-1, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); - - /* Remember the lowest common denominator for it may be unique. */ - lowest_common = savestring (matches[0]); - - for (i = newlen = 0; matches[i + 1]; i++) - { - if (strcmp (matches[i], matches[i + 1]) == 0) - { - xfree (matches[i]); - matches[i] = (char *)&dead_slot; - } - else - newlen++; - } - - /* We have marked all the dead slots with (char *)&dead_slot. - Copy all the non-dead entries into a new array. */ - temp_array = (char **)xmalloc ((3 + newlen) * sizeof (char *)); - for (i = j = 1; matches[i]; i++) - { - if (matches[i] != (char *)&dead_slot) - temp_array[j++] = matches[i]; - } - temp_array[j] = (char *)NULL; - - if (matches[0] != (char *)&dead_slot) - xfree (matches[0]); - - /* Place the lowest common denominator back in [0]. */ - temp_array[0] = lowest_common; - - /* If there is one string left, and it is identical to the - lowest common denominator, then the LCD is the string to - insert. */ - if (j == 2 && strcmp (temp_array[0], temp_array[1]) == 0) - { - xfree (temp_array[1]); - temp_array[1] = (char *)NULL; - } - return (temp_array); -} - -/* Find the common prefix of the list of matches, and put it into - matches[0]. */ -static int -compute_lcd_of_matches (char **match_list, int matches, const char *text) -{ - register int i, c1, c2, si; - int low; /* Count of max-matched characters. */ - int lx; - char *dtext; /* dequoted TEXT, if needed */ -#if defined (HANDLE_MULTIBYTE) - int v; - size_t v1, v2; - mbstate_t ps1, ps2; - wchar_t wc1, wc2; -#endif - - /* If only one match, just use that. Otherwise, compare each - member of the list with the next, finding out where they - stop matching. */ - if (matches == 1) - { - match_list[0] = match_list[1]; - match_list[1] = (char *)NULL; - return 1; - } - - for (i = 1, low = 100000; i < matches; i++) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - memset (&ps1, 0, sizeof (mbstate_t)); - memset (&ps2, 0, sizeof (mbstate_t)); - } -#endif - if (_rl_completion_case_fold) - { - for (si = 0; - (c1 = _rl_to_lower(match_list[i][si])) && - (c2 = _rl_to_lower(match_list[i + 1][si])); - si++) -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - v1 = mbrtowc(&wc1, match_list[i]+si, strlen (match_list[i]+si), &ps1); - v2 = mbrtowc (&wc2, match_list[i+1]+si, strlen (match_list[i+1]+si), &ps2); - if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) - { - if (c1 != c2) /* do byte comparison */ - break; - continue; - } - wc1 = towlower (wc1); - wc2 = towlower (wc2); - if (wc1 != wc2) - break; - else if (v1 > 1) - si += v1 - 1; - } - else -#endif - if (c1 != c2) - break; - } - else - { - for (si = 0; - (c1 = match_list[i][si]) && - (c2 = match_list[i + 1][si]); - si++) -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - mbstate_t ps_back; - ps_back = ps1; - if (!_rl_compare_chars (match_list[i], si, &ps1, match_list[i+1], si, &ps2)) - break; - else if ((v = _rl_get_char_len (&match_list[i][si], &ps_back)) > 1) - si += v - 1; - } - else -#endif - if (c1 != c2) - break; - } - - if (low > si) - low = si; - } - - /* If there were multiple matches, but none matched up to even the - first character, and the user typed something, use that as the - value of matches[0]. */ - if (low == 0 && text && *text) - { - match_list[0] = (char *)xmalloc (strlen (text) + 1); - strcpy (match_list[0], text); - } - else - { - match_list[0] = (char *)xmalloc (low + 1); - - /* XXX - this might need changes in the presence of multibyte chars */ - - /* If we are ignoring case, try to preserve the case of the string - the user typed in the face of multiple matches differing in case. */ - if (_rl_completion_case_fold) - { - /* We're making an assumption here: - IF we're completing filenames AND - the application has defined a filename dequoting function AND - we found a quote character AND - the application has requested filename quoting - THEN - we assume that TEXT was dequoted before checking against - the file system and needs to be dequoted here before we - check against the list of matches - FI */ - dtext = (char *)NULL; - if (rl_filename_completion_desired && - rl_filename_dequoting_function && - rl_completion_found_quote && - rl_filename_quoting_desired) - { - dtext = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character); - text = dtext; - } - - /* sort the list to get consistent answers. */ - if (rl_sort_completion_matches) - qsort (match_list+1, matches, sizeof(char *), (QSFUNC *)_rl_qsort_string_compare); - - si = strlen (text); - lx = (si <= low) ? si : low; /* check shorter of text and matches */ - /* Try to preserve the case of what the user typed in the presence of - multiple matches: check each match for something that matches - what the user typed taking case into account; use it up to common - length of matches if one is found. If not, just use first match. */ - for (i = 1; i <= matches; i++) - if (strncmp (match_list[i], text, lx) == 0) - { - strncpy (match_list[0], match_list[i], low); - break; - } - /* no casematch, use first entry */ - if (i > matches) - strncpy (match_list[0], match_list[1], low); - - FREE (dtext); - } - else - strncpy (match_list[0], match_list[1], low); - - match_list[0][low] = '\0'; - } - - return matches; -} - -static int -postprocess_matches (char ***matchesp, int matching_filenames) -{ - char *t, **matches, **temp_matches; - int nmatch, i; - - matches = *matchesp; - - if (matches == 0) - return 0; - - /* It seems to me that in all the cases we handle we would like - to ignore duplicate possibilities. Scan for the text to - insert being identical to the other completions. */ - if (rl_ignore_completion_duplicates) - { - temp_matches = remove_duplicate_matches (matches); - xfree (matches); - matches = temp_matches; - } - - /* If we are matching filenames, then here is our chance to - do clever processing by re-examining the list. Call the - ignore function with the array as a parameter. It can - munge the array, deleting matches as it desires. */ - if (rl_ignore_some_completions_function && matching_filenames) - { - for (nmatch = 1; matches[nmatch]; nmatch++) - ; - (void)(*rl_ignore_some_completions_function) (matches); - if (matches == 0 || matches[0] == 0) - { - FREE (matches); - *matchesp = (char **)0; - return 0; - } - else - { - /* If we removed some matches, recompute the common prefix. */ - for (i = 1; matches[i]; i++) - ; - if (i > 1 && i < nmatch) - { - t = matches[0]; - compute_lcd_of_matches (matches, i - 1, t); - FREE (t); - } - } - } - - *matchesp = matches; - return (1); -} - -static int -complete_get_screenwidth (void) -{ - int cols; - char *envcols; - - cols = _rl_completion_columns; - if (cols >= 0 && cols <= _rl_screenwidth) - return cols; - envcols = getenv ("COLUMNS"); - if (envcols && *envcols) - cols = atoi (envcols); - if (cols >= 0 && cols <= _rl_screenwidth) - return cols; - return _rl_screenwidth; -} - -/* A convenience function for displaying a list of strings in - columnar format on readline's output stream. MATCHES is the list - of strings, in argv format, LEN is the number of strings in MATCHES, - and MAX is the length of the longest string in MATCHES. */ -void -rl_display_match_list (char **matches, int len, int max) -{ - int count, limit, printed_len, lines, cols; - int i, j, k, l, common_length, sind; - char *temp, *t; - - /* Find the length of the prefix common to all items: length as displayed - characters (common_length) and as a byte index into the matches (sind) */ - common_length = sind = 0; - if (_rl_completion_prefix_display_length > 0) - { - t = printable_part (matches[0]); - /* check again in case of /usr/src/ */ - temp = rl_filename_completion_desired ? strrchr (t, '/') : 0; - common_length = temp ? fnwidth (temp) : fnwidth (t); - sind = temp ? strlen (temp) : strlen (t); - if (common_length > max || sind > max) - common_length = sind = 0; - - if (common_length > _rl_completion_prefix_display_length && common_length > ELLIPSIS_LEN) - max -= common_length - ELLIPSIS_LEN; - else - common_length = sind = 0; - } -#if defined (COLOR_SUPPORT) - else if (_rl_colored_completion_prefix > 0) - { - t = printable_part (matches[0]); - temp = rl_filename_completion_desired ? strrchr (t, '/') : 0; - common_length = temp ? fnwidth (temp) : fnwidth (t); - sind = temp ? RL_STRLEN (temp+1) : RL_STRLEN (t); /* want portion after final slash */ - if (common_length > max || sind > max) - common_length = sind = 0; - } -#endif - - /* How many items of MAX length can we fit in the screen window? */ - cols = complete_get_screenwidth (); - max += 2; - limit = cols / max; - if (limit != 1 && (limit * max == cols)) - limit--; - - /* If cols == 0, limit will end up -1 */ - if (cols < _rl_screenwidth && limit < 0) - limit = 1; - - /* Avoid a possible floating exception. If max > cols, - limit will be 0 and a divide-by-zero fault will result. */ - if (limit == 0) - limit = 1; - - /* How many iterations of the printing loop? */ - count = (len + (limit - 1)) / limit; - - /* Watch out for special case. If LEN is less than LIMIT, then - just do the inner printing loop. - 0 < len <= limit implies count = 1. */ - - /* Sort the items if they are not already sorted. */ - if (rl_ignore_completion_duplicates == 0 && rl_sort_completion_matches) - qsort (matches + 1, len, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); - - rl_crlf (); - - lines = 0; - if (_rl_print_completions_horizontally == 0) - { - /* Print the sorted items, up-and-down alphabetically, like ls. */ - for (i = 1; i <= count; i++) - { - for (j = 0, l = i; j < limit; j++) - { - if (l > len || matches[l] == 0) - break; - else - { - temp = printable_part (matches[l]); - printed_len = print_filename (temp, matches[l], sind); - - if (j + 1 < limit) - { - if (max <= printed_len) - putc (' ', rl_outstream); - else - for (k = 0; k < max - printed_len; k++) - putc (' ', rl_outstream); - } - } - l += count; - } - rl_crlf (); -#if defined (SIGWINCH) - if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0) -#else - if (RL_SIG_RECEIVED ()) -#endif - return; - lines++; - if (_rl_page_completions && lines >= (_rl_screenheight - 1) && i < count) - { - lines = _rl_internal_pager (lines); - if (lines < 0) - return; - } - } - } - else - { - /* Print the sorted items, across alphabetically, like ls -x. */ - for (i = 1; matches[i]; i++) - { - temp = printable_part (matches[i]); - printed_len = print_filename (temp, matches[i], sind); - /* Have we reached the end of this line? */ -#if defined (SIGWINCH) - if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0) -#else - if (RL_SIG_RECEIVED ()) -#endif - return; - if (matches[i+1]) - { - if (limit == 1 || (i && (limit > 1) && (i % limit) == 0)) - { - rl_crlf (); - lines++; - if (_rl_page_completions && lines >= _rl_screenheight - 1) - { - lines = _rl_internal_pager (lines); - if (lines < 0) - return; - } - } - else if (max <= printed_len) - putc (' ', rl_outstream); - else - for (k = 0; k < max - printed_len; k++) - putc (' ', rl_outstream); - } - } - rl_crlf (); - } -} - -/* Display MATCHES, a list of matching filenames in argv format. This - handles the simple case -- a single match -- first. If there is more - than one match, we compute the number of strings in the list and the - length of the longest string, which will be needed by the display - function. If the application wants to handle displaying the list of - matches itself, it sets RL_COMPLETION_DISPLAY_MATCHES_HOOK to the - address of a function, and we just call it. If we're handling the - display ourselves, we just call rl_display_match_list. We also check - that the list of matches doesn't exceed the user-settable threshold, - and ask the user if he wants to see the list if there are more matches - than RL_COMPLETION_QUERY_ITEMS. */ -static void -display_matches (char **matches) -{ - int len, max, i; - char *temp; - - /* Move to the last visible line of a possibly-multiple-line command. */ - _rl_move_vert (_rl_vis_botlin); - - /* Handle simple case first. What if there is only one answer? */ - if (matches[1] == 0) - { - temp = printable_part (matches[0]); - rl_crlf (); - print_filename (temp, matches[0], 0); - rl_crlf (); - - rl_forced_update_display (); - rl_display_fixed = 1; - - return; - } - - /* There is more than one answer. Find out how many there are, - and find the maximum printed length of a single entry. */ - for (max = 0, i = 1; matches[i]; i++) - { - temp = printable_part (matches[i]); - len = fnwidth (temp); - - if (len > max) - max = len; - } - - len = i - 1; - - /* If the caller has defined a display hook, then call that now. */ - if (rl_completion_display_matches_hook) - { - (*rl_completion_display_matches_hook) (matches, len, max); - return; - } - - /* If there are many items, then ask the user if she really wants to - see them all. */ - if (rl_completion_query_items > 0 && len >= rl_completion_query_items) - { - rl_crlf (); - fprintf (rl_outstream, "Display all %d possibilities? (y or n)", len); - fflush (rl_outstream); - if ((completion_y_or_n = get_y_or_n (0)) == 0) - { - rl_crlf (); - - rl_forced_update_display (); - rl_display_fixed = 1; - - return; - } - } - - rl_display_match_list (matches, len, max); - - rl_forced_update_display (); - rl_display_fixed = 1; -} - -/* qc == pointer to quoting character, if any */ -static char * -make_quoted_replacement (char *match, int mtype, char *qc) -{ - int should_quote, do_replace; - char *replacement; - - /* If we are doing completion on quoted substrings, and any matches - contain any of the completer_word_break_characters, then auto- - matically prepend the substring with a quote character (just pick - the first one from the list of such) if it does not already begin - with a quote string. FIXME: Need to remove any such automatically - inserted quote character when it no longer is necessary, such as - if we change the string we are completing on and the new set of - matches don't require a quoted substring. */ - replacement = match; - - should_quote = match && rl_completer_quote_characters && - rl_filename_completion_desired && - rl_filename_quoting_desired; - - if (should_quote) - should_quote = should_quote && (!qc || !*qc || - (rl_completer_quote_characters && strchr (rl_completer_quote_characters, *qc))); - - if (should_quote) - { - /* If there is a single match, see if we need to quote it. - This also checks whether the common prefix of several - matches needs to be quoted. */ - should_quote = rl_filename_quote_characters - ? (_rl_strpbrk (match, rl_filename_quote_characters) != 0) - : 0; - - do_replace = should_quote ? mtype : NO_MATCH; - /* Quote the replacement, since we found an embedded - word break character in a potential match. */ - if (do_replace != NO_MATCH && rl_filename_quoting_function) - replacement = (*rl_filename_quoting_function) (match, do_replace, qc); - } - return (replacement); -} - -static void -insert_match (char *match, int start, int mtype, char *qc) -{ - char *replacement, *r; - char oqc; - int end, rlen; - - oqc = qc ? *qc : '\0'; - replacement = make_quoted_replacement (match, mtype, qc); - - /* Now insert the match. */ - if (replacement) - { - rlen = strlen (replacement); - /* Don't double an opening quote character. */ - if (qc && *qc && start && rl_line_buffer[start - 1] == *qc && - replacement[0] == *qc) - start--; - /* If make_quoted_replacement changed the quoting character, remove - the opening quote and insert the (fully-quoted) replacement. */ - else if (qc && (*qc != oqc) && start && rl_line_buffer[start - 1] == oqc && - replacement[0] != oqc) - start--; - end = rl_point - 1; - /* Don't double a closing quote character */ - if (qc && *qc && end && rl_line_buffer[rl_point] == *qc && replacement[rlen - 1] == *qc) - end++; - if (_rl_skip_completed_text) - { - r = replacement; - while (start < rl_end && *r && rl_line_buffer[start] == *r) - { - start++; - r++; - } - if (start <= end || *r) - _rl_replace_text (r, start, end); - rl_point = start + strlen (r); - } - else - _rl_replace_text (replacement, start, end); - if (replacement != match) - xfree (replacement); - } -} - -/* Append any necessary closing quote and a separator character to the - just-inserted match. If the user has specified that directories - should be marked by a trailing `/', append one of those instead. The - default trailing character is a space. Returns the number of characters - appended. If NONTRIVIAL_MATCH is set, we test for a symlink (if the OS - has them) and don't add a suffix for a symlink to a directory. A - nontrivial match is one that actually adds to the word being completed. - The variable rl_completion_mark_symlink_dirs controls this behavior - (it's initially set to the what the user has chosen, indicated by the - value of _rl_complete_mark_symlink_dirs, but may be modified by an - application's completion function). */ -static int -append_to_match (char *text, int delimiter, int quote_char, int nontrivial_match) -{ - char temp_string[4], *filename, *fn; - int temp_string_index, s; - struct stat finfo; - - temp_string_index = 0; - if (quote_char && rl_point && rl_completion_suppress_quote == 0 && - rl_line_buffer[rl_point - 1] != quote_char) - temp_string[temp_string_index++] = quote_char; - - if (delimiter) - temp_string[temp_string_index++] = delimiter; - else if (rl_completion_suppress_append == 0 && rl_completion_append_character) - temp_string[temp_string_index++] = rl_completion_append_character; - - temp_string[temp_string_index++] = '\0'; - - if (rl_filename_completion_desired) - { - filename = tilde_expand (text); - if (rl_filename_stat_hook) - { - fn = savestring (filename); - (*rl_filename_stat_hook) (&fn); - xfree (filename); - filename = fn; - } - s = (nontrivial_match && rl_completion_mark_symlink_dirs == 0) - ? LSTAT (filename, &finfo) - : stat (filename, &finfo); - if (s == 0 && S_ISDIR (finfo.st_mode)) - { - if (_rl_complete_mark_directories /* && rl_completion_suppress_append == 0 */) - { - /* This is clumsy. Avoid putting in a double slash if point - is at the end of the line and the previous character is a - slash. */ - if (rl_point && rl_line_buffer[rl_point] == '\0' && rl_line_buffer[rl_point - 1] == '/') - ; - else if (rl_line_buffer[rl_point] != '/') - rl_insert_text ("/"); - } - } -#ifdef S_ISLNK - /* Don't add anything if the filename is a symlink and resolves to a - directory. */ - else if (s == 0 && S_ISLNK (finfo.st_mode) && path_isdir (filename)) - ; -#endif - else - { - if (rl_point == rl_end && temp_string_index) - rl_insert_text (temp_string); - } - xfree (filename); - } - else - { - if (rl_point == rl_end && temp_string_index) - rl_insert_text (temp_string); - } - - return (temp_string_index); -} - -static void -insert_all_matches (char **matches, int point, char *qc) -{ - int i; - char *rp; - - rl_begin_undo_group (); - /* remove any opening quote character; make_quoted_replacement will add - it back. */ - if (qc && *qc && point && rl_line_buffer[point - 1] == *qc) - point--; - rl_delete_text (point, rl_point); - rl_point = point; - - if (matches[1]) - { - for (i = 1; matches[i]; i++) - { - rp = make_quoted_replacement (matches[i], SINGLE_MATCH, qc); - rl_insert_text (rp); - rl_insert_text (" "); - if (rp != matches[i]) - xfree (rp); - } - } - else - { - rp = make_quoted_replacement (matches[0], SINGLE_MATCH, qc); - rl_insert_text (rp); - rl_insert_text (" "); - if (rp != matches[0]) - xfree (rp); - } - rl_end_undo_group (); -} - -void -_rl_free_match_list (char **matches) -{ - register int i; - - if (matches == 0) - return; - - for (i = 0; matches[i]; i++) - xfree (matches[i]); - xfree (matches); -} - -/* Complete the word at or before point. - WHAT_TO_DO says what to do with the completion. - `?' means list the possible completions. - TAB means do standard completion. - `*' means insert all of the possible completions. - `!' means to do standard completion, and list all possible completions if - there is more than one. - `@' means to do standard completion, and list all possible completions if - there is more than one and partial completion is not possible. */ -int -rl_complete_internal (int what_to_do) -{ - char **matches; - rl_compentry_func_t *our_func; - int start, end, delimiter, found_quote, i, nontrivial_lcd; - char *text, *saved_line_buffer; - char quote_char; - int tlen, mlen; - - RL_SETSTATE(RL_STATE_COMPLETING); - - set_completion_defaults (what_to_do); - - saved_line_buffer = rl_line_buffer ? savestring (rl_line_buffer) : (char *)NULL; - our_func = rl_completion_entry_function - ? rl_completion_entry_function - : rl_filename_completion_function; - /* We now look backwards for the start of a filename/variable word. */ - end = rl_point; - found_quote = delimiter = 0; - quote_char = '\0'; - - if (rl_point) - /* This (possibly) changes rl_point. If it returns a non-zero char, - we know we have an open quote. */ - quote_char = _rl_find_completion_word (&found_quote, &delimiter); - - start = rl_point; - rl_point = end; - - text = rl_copy_text (start, end); - matches = gen_completion_matches (text, start, end, our_func, found_quote, quote_char); - /* nontrivial_lcd is set if the common prefix adds something to the word - being completed. */ - nontrivial_lcd = matches && strcmp (text, matches[0]) != 0; - if (what_to_do == '!' || what_to_do == '@') - tlen = strlen (text); - xfree (text); - - if (matches == 0) - { - rl_ding (); - FREE (saved_line_buffer); - completion_changed_buffer = 0; - RL_UNSETSTATE(RL_STATE_COMPLETING); - _rl_reset_completion_state (); - return (0); - } - - /* If we are matching filenames, the attempted completion function will - have set rl_filename_completion_desired to a non-zero value. The basic - rl_filename_completion_function does this. */ - i = rl_filename_completion_desired; - - if (postprocess_matches (&matches, i) == 0) - { - rl_ding (); - FREE (saved_line_buffer); - completion_changed_buffer = 0; - RL_UNSETSTATE(RL_STATE_COMPLETING); - _rl_reset_completion_state (); - return (0); - } - - switch (what_to_do) - { - case TAB: - case '!': - case '@': - /* Insert the first match with proper quoting. */ - if (what_to_do == TAB) - { - if (*matches[0]) - insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); - } - else if (*matches[0] && matches[1] == 0) - /* should we perform the check only if there are multiple matches? */ - insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); - else if (*matches[0]) /* what_to_do != TAB && multiple matches */ - { - mlen = *matches[0] ? strlen (matches[0]) : 0; - if (mlen >= tlen) - insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); - } - - /* If there are more matches, ring the bell to indicate. - If we are in vi mode, Posix.2 says to not ring the bell. - If the `show-all-if-ambiguous' variable is set, display - all the matches immediately. Otherwise, if this was the - only match, and we are hacking files, check the file to - see if it was a directory. If so, and the `mark-directories' - variable is set, add a '/' to the name. If not, and we - are at the end of the line, then add a space. */ - if (matches[1]) - { - if (what_to_do == '!') - { - display_matches (matches); - break; - } - else if (what_to_do == '@') - { - if (nontrivial_lcd == 0) - display_matches (matches); - break; - } - else if (rl_editing_mode != vi_mode) - rl_ding (); /* There are other matches remaining. */ - } - else - append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd); - - break; - - case '*': - insert_all_matches (matches, start, "e_char); - break; - - case '?': - if (rl_completion_display_matches_hook == 0) - { - _rl_sigcleanup = _rl_complete_sigcleanup; - _rl_sigcleanarg = matches; - _rl_complete_display_matches_interrupt = 0; - } - display_matches (matches); - if (_rl_complete_display_matches_interrupt) - { - matches = 0; /* already freed by rl_complete_sigcleanup */ - _rl_complete_display_matches_interrupt = 0; - if (rl_signal_event_hook) - (*rl_signal_event_hook) (); /* XXX */ - } - _rl_sigcleanup = 0; - _rl_sigcleanarg = 0; - break; - - default: - _rl_ttymsg ("bad value %d for what_to_do in rl_complete", what_to_do); - rl_ding (); - FREE (saved_line_buffer); - RL_UNSETSTATE(RL_STATE_COMPLETING); - _rl_free_match_list (matches); - _rl_reset_completion_state (); - return 1; - } - - _rl_free_match_list (matches); - - /* Check to see if the line has changed through all of this manipulation. */ - if (saved_line_buffer) - { - completion_changed_buffer = strcmp (rl_line_buffer, saved_line_buffer) != 0; - xfree (saved_line_buffer); - } - - RL_UNSETSTATE(RL_STATE_COMPLETING); - _rl_reset_completion_state (); - - RL_CHECK_SIGNALS (); - return 0; -} - -/***************************************************************/ -/* */ -/* Application-callable completion match generator functions */ -/* */ -/***************************************************************/ - -/* Return an array of (char *) which is a list of completions for TEXT. - If there are no completions, return a NULL pointer. - The first entry in the returned array is the substitution for TEXT. - The remaining entries are the possible completions. - The array is terminated with a NULL pointer. - - ENTRY_FUNCTION is a function of two args, and returns a (char *). - The first argument is TEXT. - The second is a state argument; it should be zero on the first call, and - non-zero on subsequent calls. It returns a NULL pointer to the caller - when there are no more matches. - */ -char ** -rl_completion_matches (const char *text, rl_compentry_func_t *entry_function) -{ - register int i; - - /* Number of slots in match_list. */ - int match_list_size; - - /* The list of matches. */ - char **match_list; - - /* Number of matches actually found. */ - int matches; - - /* Temporary string binder. */ - char *string; - - matches = 0; - match_list_size = 10; - match_list = (char **)xmalloc ((match_list_size + 1) * sizeof (char *)); - match_list[1] = (char *)NULL; - - while (string = (*entry_function) (text, matches)) - { - if (RL_SIG_RECEIVED ()) - { - /* Start at 1 because we don't set matches[0] in this function. - Only free the list members if we're building match list from - rl_filename_completion_function, since we know that doesn't - free the strings it returns. */ - if (entry_function == rl_filename_completion_function) - { - for (i = 1; match_list[i]; i++) - xfree (match_list[i]); - } - xfree (match_list); - match_list = 0; - match_list_size = 0; - matches = 0; - RL_CHECK_SIGNALS (); - } - - if (matches + 1 >= match_list_size) - match_list = (char **)xrealloc - (match_list, ((match_list_size += 10) + 1) * sizeof (char *)); - - if (match_list == 0) - return (match_list); - - match_list[++matches] = string; - match_list[matches + 1] = (char *)NULL; - } - - /* If there were any matches, then look through them finding out the - lowest common denominator. That then becomes match_list[0]. */ - if (matches) - compute_lcd_of_matches (match_list, matches, text); - else /* There were no matches. */ - { - xfree (match_list); - match_list = (char **)NULL; - } - return (match_list); -} - -/* A completion function for usernames. - TEXT contains a partial username preceded by a random - character (usually `~'). */ -char * -rl_username_completion_function (const char *text, int state) -{ -#if defined (__WIN32__) || defined (__OPENNT) - return (char *)NULL; -#else /* !__WIN32__ && !__OPENNT) */ - static char *username = (char *)NULL; - static struct passwd *entry; - static int namelen, first_char, first_char_loc; - char *value; - - if (state == 0) - { - FREE (username); - - first_char = *text; - first_char_loc = first_char == '~'; - - username = savestring (&text[first_char_loc]); - namelen = strlen (username); -#if defined (HAVE_GETPWENT) - setpwent (); -#endif - } - -#if defined (HAVE_GETPWENT) - while (entry = getpwent ()) - { - /* Null usernames should result in all users as possible completions. */ - if (namelen == 0 || (STREQN (username, entry->pw_name, namelen))) - break; - } -#endif - - if (entry == 0) - { -#if defined (HAVE_GETPWENT) - endpwent (); -#endif - return ((char *)NULL); - } - else - { - value = (char *)xmalloc (2 + strlen (entry->pw_name)); - - *value = *text; - - strcpy (value + first_char_loc, entry->pw_name); - - if (first_char == '~') - rl_filename_completion_desired = 1; - - return (value); - } -#endif /* !__WIN32__ && !__OPENNT */ -} - -/* Return non-zero if CONVFN matches FILENAME up to the length of FILENAME - (FILENAME_LEN). If _rl_completion_case_fold is set, compare without - regard to the alphabetic case of characters. If - _rl_completion_case_map is set, make `-' and `_' equivalent. CONVFN is - the possibly-converted directory entry; FILENAME is what the user typed. */ -static int -complete_fncmp (const char *convfn, int convlen, const char *filename, int filename_len) -{ - register char *s1, *s2; - int d, len; -#if defined (HANDLE_MULTIBYTE) - size_t v1, v2; - mbstate_t ps1, ps2; - wchar_t wc1, wc2; -#endif - -#if defined (HANDLE_MULTIBYTE) - memset (&ps1, 0, sizeof (mbstate_t)); - memset (&ps2, 0, sizeof (mbstate_t)); -#endif - - if (filename_len == 0) - return 1; - if (convlen < filename_len) - return 0; - - len = filename_len; - s1 = (char *)convfn; - s2 = (char *)filename; - - /* Otherwise, if these match up to the length of filename, then - it is a match. */ - if (_rl_completion_case_fold && _rl_completion_case_map) - { - /* Case-insensitive comparison treating _ and - as equivalent */ -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - do - { - v1 = mbrtowc (&wc1, s1, convlen, &ps1); - v2 = mbrtowc (&wc2, s2, filename_len, &ps2); - if (v1 == 0 && v2 == 0) - return 1; - else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) - { - if (*s1 != *s2) /* do byte comparison */ - return 0; - else if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_')) - return 0; - s1++; s2++; len--; - continue; - } - wc1 = towlower (wc1); - wc2 = towlower (wc2); - s1 += v1; - s2 += v1; - len -= v1; - if ((wc1 == L'-' || wc1 == L'_') && (wc2 == L'-' || wc2 == L'_')) - continue; - if (wc1 != wc2) - return 0; - } - while (len != 0); - } - else -#endif - { - do - { - d = _rl_to_lower (*s1) - _rl_to_lower (*s2); - /* *s1 == [-_] && *s2 == [-_] */ - if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_')) - d = 0; - if (d != 0) - return 0; - s1++; s2++; /* already checked convlen >= filename_len */ - } - while (--len != 0); - } - - return 1; - } - else if (_rl_completion_case_fold) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - do - { - v1 = mbrtowc (&wc1, s1, convlen, &ps1); - v2 = mbrtowc (&wc2, s2, filename_len, &ps2); - if (v1 == 0 && v2 == 0) - return 1; - else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) - { - if (*s1 != *s2) /* do byte comparison */ - return 0; - s1++; s2++; len--; - continue; - } - wc1 = towlower (wc1); - wc2 = towlower (wc2); - if (wc1 != wc2) - return 0; - s1 += v1; - s2 += v1; - len -= v1; - } - while (len != 0); - return 1; - } - else -#endif - if ((_rl_to_lower (convfn[0]) == _rl_to_lower (filename[0])) && - (convlen >= filename_len) && - (_rl_strnicmp (filename, convfn, filename_len) == 0)) - return 1; - } - else - { - if ((convfn[0] == filename[0]) && - (convlen >= filename_len) && - (strncmp (filename, convfn, filename_len) == 0)) - return 1; - } - return 0; -} - -/* Okay, now we write the entry_function for filename completion. In the - general case. Note that completion in the shell is a little different - because of all the pathnames that must be followed when looking up the - completion for a command. */ -char * -rl_filename_completion_function (const char *text, int state) -{ - static DIR *directory = (DIR *)NULL; - static char *filename = (char *)NULL; - static char *dirname = (char *)NULL; - static char *users_dirname = (char *)NULL; - static int filename_len; - char *temp, *dentry, *convfn; - int dirlen, dentlen, convlen; - int tilde_dirname; - struct dirent *entry; - - /* If we don't have any state, then do some initialization. */ - if (state == 0) - { - /* If we were interrupted before closing the directory or reading - all of its contents, close it. */ - if (directory) - { - closedir (directory); - directory = (DIR *)NULL; - } - FREE (dirname); - FREE (filename); - FREE (users_dirname); - - filename = savestring (text); - if (*text == 0) - text = "."; - dirname = savestring (text); - - temp = strrchr (dirname, '/'); - -#if defined (__MSDOS__) || defined (_WIN32) - /* special hack for //X/... */ - if (dirname[0] == '/' && dirname[1] == '/' && ISALPHA ((unsigned char)dirname[2]) && dirname[3] == '/') - temp = strrchr (dirname + 3, '/'); -#endif - - if (temp) - { - strcpy (filename, ++temp); - *temp = '\0'; - } -#if defined (__MSDOS__) || (defined (_WIN32) && !defined (__CYGWIN__)) - /* searches from current directory on the drive */ - else if (ISALPHA ((unsigned char)dirname[0]) && dirname[1] == ':') - { - strcpy (filename, dirname + 2); - dirname[2] = '\0'; - } -#endif - else - { - dirname[0] = '.'; - dirname[1] = '\0'; - } - - /* We aren't done yet. We also support the "~user" syntax. */ - - /* Save the version of the directory that the user typed, dequoting - it if necessary. */ - if (rl_completion_found_quote && rl_filename_dequoting_function) - users_dirname = (*rl_filename_dequoting_function) (dirname, rl_completion_quote_character); - else - users_dirname = savestring (dirname); - - tilde_dirname = 0; - if (*dirname == '~') - { - temp = tilde_expand (dirname); - xfree (dirname); - dirname = temp; - tilde_dirname = 1; - } - - /* We have saved the possibly-dequoted version of the directory name - the user typed. Now transform the directory name we're going to - pass to opendir(2). The directory rewrite hook modifies only the - directory name; the directory completion hook modifies both the - directory name passed to opendir(2) and the version the user - typed. Both the directory completion and rewrite hooks should perform - any necessary dequoting. The hook functions return 1 if they modify - the directory name argument. If either hook returns 0, it should - not modify the directory name pointer passed as an argument. */ - if (rl_directory_rewrite_hook) - (*rl_directory_rewrite_hook) (&dirname); - else if (rl_directory_completion_hook && (*rl_directory_completion_hook) (&dirname)) - { - xfree (users_dirname); - users_dirname = savestring (dirname); - } - else if (tilde_dirname == 0 && rl_completion_found_quote && rl_filename_dequoting_function) - { - /* delete single and double quotes */ - xfree (dirname); - dirname = savestring (users_dirname); - } - directory = opendir (dirname); - - /* Now dequote a non-null filename. FILENAME will not be NULL, but may - be empty. */ - if (*filename && rl_completion_found_quote && rl_filename_dequoting_function) - { - /* delete single and double quotes */ - temp = (*rl_filename_dequoting_function) (filename, rl_completion_quote_character); - xfree (filename); - filename = temp; - } - filename_len = strlen (filename); - - rl_filename_completion_desired = 1; - } - - /* At this point we should entertain the possibility of hacking wildcarded - filenames, like /usr/man/man/te. If the directory name - contains globbing characters, then build an array of directories, and - then map over that list while completing. */ - /* *** UNIMPLEMENTED *** */ - - /* Now that we have some state, we can read the directory. */ - - entry = (struct dirent *)NULL; - while (directory && (entry = readdir (directory))) - { - convfn = dentry = entry->d_name; - convlen = dentlen = D_NAMLEN (entry); - - if (rl_filename_rewrite_hook) - { - convfn = (*rl_filename_rewrite_hook) (dentry, dentlen); - convlen = (convfn == dentry) ? dentlen : strlen (convfn); - } - - /* Special case for no filename. If the user has disabled the - `match-hidden-files' variable, skip filenames beginning with `.'. - All other entries except "." and ".." match. */ - if (filename_len == 0) - { - if (_rl_match_hidden_files == 0 && HIDDEN_FILE (convfn)) - continue; - - if (convfn[0] != '.' || - (convfn[1] && (convfn[1] != '.' || convfn[2]))) - break; - } - else - { - if (complete_fncmp (convfn, convlen, filename, filename_len)) - break; - } - } - - if (entry == 0) - { - if (directory) - { - closedir (directory); - directory = (DIR *)NULL; - } - if (dirname) - { - xfree (dirname); - dirname = (char *)NULL; - } - if (filename) - { - xfree (filename); - filename = (char *)NULL; - } - if (users_dirname) - { - xfree (users_dirname); - users_dirname = (char *)NULL; - } - - return (char *)NULL; - } - else - { - /* dirname && (strcmp (dirname, ".") != 0) */ - if (dirname && (dirname[0] != '.' || dirname[1])) - { - if (rl_complete_with_tilde_expansion && *users_dirname == '~') - { - dirlen = strlen (dirname); - temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry)); - strcpy (temp, dirname); - /* Canonicalization cuts off any final slash present. We - may need to add it back. */ - if (dirname[dirlen - 1] != '/') - { - temp[dirlen++] = '/'; - temp[dirlen] = '\0'; - } - } - else - { - dirlen = strlen (users_dirname); - temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry)); - strcpy (temp, users_dirname); - /* Make sure that temp has a trailing slash here. */ - if (users_dirname[dirlen - 1] != '/') - temp[dirlen++] = '/'; - } - - strcpy (temp + dirlen, convfn); - } - else - temp = savestring (convfn); - - if (convfn != dentry) - xfree (convfn); - - return (temp); - } -} - -/* An initial implementation of a menu completion function a la tcsh. The - first time (if the last readline command was not rl_old_menu_complete), we - generate the list of matches. This code is very similar to the code in - rl_complete_internal -- there should be a way to combine the two. Then, - for each item in the list of matches, we insert the match in an undoable - fashion, with the appropriate character appended (this happens on the - second and subsequent consecutive calls to rl_old_menu_complete). When we - hit the end of the match list, we restore the original unmatched text, - ring the bell, and reset the counter to zero. */ -int -rl_old_menu_complete (int count, int invoking_key) -{ - rl_compentry_func_t *our_func; - int matching_filenames, found_quote; - - static char *orig_text; - static char **matches = (char **)0; - static int match_list_index = 0; - static int match_list_size = 0; - static int orig_start, orig_end; - static char quote_char; - static int delimiter; - - /* The first time through, we generate the list of matches and set things - up to insert them. */ - if (rl_last_func != rl_old_menu_complete) - { - /* Clean up from previous call, if any. */ - FREE (orig_text); - if (matches) - _rl_free_match_list (matches); - - match_list_index = match_list_size = 0; - matches = (char **)NULL; - - rl_completion_invoking_key = invoking_key; - - RL_SETSTATE(RL_STATE_COMPLETING); - - /* Only the completion entry function can change these. */ - set_completion_defaults ('%'); - - our_func = rl_menu_completion_entry_function; - if (our_func == 0) - our_func = rl_completion_entry_function - ? rl_completion_entry_function - : rl_filename_completion_function; - - /* We now look backwards for the start of a filename/variable word. */ - orig_end = rl_point; - found_quote = delimiter = 0; - quote_char = '\0'; - - if (rl_point) - /* This (possibly) changes rl_point. If it returns a non-zero char, - we know we have an open quote. */ - quote_char = _rl_find_completion_word (&found_quote, &delimiter); - - orig_start = rl_point; - rl_point = orig_end; - - orig_text = rl_copy_text (orig_start, orig_end); - matches = gen_completion_matches (orig_text, orig_start, orig_end, - our_func, found_quote, quote_char); - - /* If we are matching filenames, the attempted completion function will - have set rl_filename_completion_desired to a non-zero value. The basic - rl_filename_completion_function does this. */ - matching_filenames = rl_filename_completion_desired; - - if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - FREE (orig_text); - orig_text = (char *)0; - completion_changed_buffer = 0; - RL_UNSETSTATE(RL_STATE_COMPLETING); - return (0); - } - - RL_UNSETSTATE(RL_STATE_COMPLETING); - - for (match_list_size = 0; matches[match_list_size]; match_list_size++) - ; - /* matches[0] is lcd if match_list_size > 1, but the circular buffer - code below should take care of it. */ - - if (match_list_size > 1 && _rl_complete_show_all) - display_matches (matches); - } - - /* Now we have the list of matches. Replace the text between - rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with - matches[match_list_index], and add any necessary closing char. */ - - if (matches == 0 || match_list_size == 0) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - completion_changed_buffer = 0; - return (0); - } - - match_list_index += count; - if (match_list_index < 0) - { - while (match_list_index < 0) - match_list_index += match_list_size; - } - else - match_list_index %= match_list_size; - - if (match_list_index == 0 && match_list_size > 1) - { - rl_ding (); - insert_match (orig_text, orig_start, MULT_MATCH, "e_char); - } - else - { - insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, "e_char); - append_to_match (matches[match_list_index], delimiter, quote_char, - strcmp (orig_text, matches[match_list_index])); - } - - completion_changed_buffer = 1; - return (0); -} - -/* The current version of menu completion. - The differences between this function and the original are: - -1. It honors the maximum number of completions variable (completion-query-items) -2. It appends to the word as usual if there is only one match -3. It displays the common prefix if there is one, and makes it the first menu - choice if the menu-complete-display-prefix option is enabled -*/ - -int -rl_menu_complete (int count, int ignore) -{ - rl_compentry_func_t *our_func; - int matching_filenames, found_quote; - - static char *orig_text; - static char **matches = (char **)0; - static int match_list_index = 0; - static int match_list_size = 0; - static int nontrivial_lcd = 0; - static int full_completion = 0; /* set to 1 if menu completion should reinitialize on next call */ - static int orig_start, orig_end; - static char quote_char; - static int delimiter, cstate; - - /* The first time through, we generate the list of matches and set things - up to insert them. */ - if ((rl_last_func != rl_menu_complete && rl_last_func != rl_backward_menu_complete) || full_completion) - { - /* Clean up from previous call, if any. */ - FREE (orig_text); - if (matches) - _rl_free_match_list (matches); - - match_list_index = match_list_size = 0; - matches = (char **)NULL; - - full_completion = 0; - - RL_SETSTATE(RL_STATE_COMPLETING); - - /* Only the completion entry function can change these. */ - set_completion_defaults ('%'); - - our_func = rl_menu_completion_entry_function; - if (our_func == 0) - our_func = rl_completion_entry_function - ? rl_completion_entry_function - : rl_filename_completion_function; - - /* We now look backwards for the start of a filename/variable word. */ - orig_end = rl_point; - found_quote = delimiter = 0; - quote_char = '\0'; - - if (rl_point) - /* This (possibly) changes rl_point. If it returns a non-zero char, - we know we have an open quote. */ - quote_char = _rl_find_completion_word (&found_quote, &delimiter); - - orig_start = rl_point; - rl_point = orig_end; - - orig_text = rl_copy_text (orig_start, orig_end); - matches = gen_completion_matches (orig_text, orig_start, orig_end, - our_func, found_quote, quote_char); - - nontrivial_lcd = matches && strcmp (orig_text, matches[0]) != 0; - - /* If we are matching filenames, the attempted completion function will - have set rl_filename_completion_desired to a non-zero value. The basic - rl_filename_completion_function does this. */ - matching_filenames = rl_filename_completion_desired; - - if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - FREE (orig_text); - orig_text = (char *)0; - completion_changed_buffer = 0; - RL_UNSETSTATE(RL_STATE_COMPLETING); - return (0); - } - - RL_UNSETSTATE(RL_STATE_COMPLETING); - - for (match_list_size = 0; matches[match_list_size]; match_list_size++) - ; - - if (match_list_size == 0) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - match_list_index = 0; - completion_changed_buffer = 0; - return (0); - } - - /* matches[0] is lcd if match_list_size > 1, but the circular buffer - code below should take care of it. */ - if (*matches[0]) - { - insert_match (matches[0], orig_start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); - orig_end = orig_start + strlen (matches[0]); - completion_changed_buffer = STREQ (orig_text, matches[0]) == 0; - } - - if (match_list_size > 1 && _rl_complete_show_all) - { - display_matches (matches); - /* If there are so many matches that the user has to be asked - whether or not he wants to see the matches, menu completion - is unwieldy. */ - if (rl_completion_query_items > 0 && match_list_size >= rl_completion_query_items) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - full_completion = 1; - return (0); - } - else if (_rl_menu_complete_prefix_first) - { - rl_ding (); - return (0); - } - } - else if (match_list_size <= 1) - { - append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd); - full_completion = 1; - return (0); - } - else if (_rl_menu_complete_prefix_first && match_list_size > 1) - { - rl_ding (); - return (0); - } - } - - /* Now we have the list of matches. Replace the text between - rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with - matches[match_list_index], and add any necessary closing char. */ - - if (matches == 0 || match_list_size == 0) - { - rl_ding (); - FREE (matches); - matches = (char **)0; - completion_changed_buffer = 0; - return (0); - } - - match_list_index += count; - if (match_list_index < 0) - { - while (match_list_index < 0) - match_list_index += match_list_size; - } - else - match_list_index %= match_list_size; - - if (match_list_index == 0 && match_list_size > 1) - { - rl_ding (); - insert_match (matches[0], orig_start, MULT_MATCH, "e_char); - } - else - { - insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, "e_char); - append_to_match (matches[match_list_index], delimiter, quote_char, - strcmp (orig_text, matches[match_list_index])); - } - - completion_changed_buffer = 1; - return (0); -} - -int -rl_backward_menu_complete (int count, int key) -{ - /* Positive arguments to backward-menu-complete translate into negative - arguments for menu-complete, and vice versa. */ - return (rl_menu_complete (-count, key)); -} diff --git a/readline/config.h.in b/readline/config.h.in deleted file mode 100644 index 6de47b5874..0000000000 --- a/readline/config.h.in +++ /dev/null @@ -1,302 +0,0 @@ -/* config.h.in. Maintained by hand. */ - -/* Template definitions for autoconf */ -#undef __EXTENSIONS__ -#undef _ALL_SOURCE -#undef _GNU_SOURCE -#undef _POSIX_SOURCE -#undef _POSIX_1_SOURCE -#undef _POSIX_PTHREAD_SEMANTICS -#undef _TANDEM_SOURCE -#undef _MINIX - -/* Define NO_MULTIBYTE_SUPPORT to not compile in support for multibyte - characters, even if the OS supports them. */ -#undef NO_MULTIBYTE_SUPPORT - -#undef _FILE_OFFSET_BITS - -/* Define as the return type of signal handlers (int or void). */ -#undef RETSIGTYPE - -#undef VOID_SIGHANDLER - -/* Characteristics of the compiler. */ -#undef sig_atomic_t - -#undef size_t - -#undef ssize_t - -#undef const - -#undef volatile - -#undef PROTOTYPES -#undef __PROTOTYPES - -#undef __CHAR_UNSIGNED__ - -/* Define if the `S_IS*' macros in do not work properly. */ -#undef STAT_MACROS_BROKEN - -/* Define if you have the chown function. */ -#undef HAVE_CHOWN - -/* Define if you have the fcntl function. */ -#undef HAVE_FCNTL - -/* Define if you have the fnmatch function. */ -#undef HAVE_FNMATCH - -/* Define if you have the getpwent function. */ -#undef HAVE_GETPWENT - -/* Define if you have the getpwnam function. */ -#undef HAVE_GETPWNAM - -/* Define if you have the getpwuid function. */ -#undef HAVE_GETPWUID - -/* Define if you have the isascii function. */ -#undef HAVE_ISASCII - -/* Define if you have the iswctype function. */ -#undef HAVE_ISWCTYPE - -/* Define if you have the iswlower function. */ -#undef HAVE_ISWLOWER - -/* Define if you have the iswupper function. */ -#undef HAVE_ISWUPPER - -/* Define if you have the isxdigit function. */ -#undef HAVE_ISXDIGIT - -/* Define if you have the kill function. */ -#undef HAVE_KILL - -/* Define if you have the lstat function. */ -#undef HAVE_LSTAT - -/* Define if you have the mbrlen function. */ -#undef HAVE_MBRLEN - -/* Define if you have the mbrtowc function. */ -#undef HAVE_MBRTOWC - -/* Define if you have the mbsrtowcs function. */ -#undef HAVE_MBSRTOWCS - -/* Define if you have the memmove function. */ -#undef HAVE_MEMMOVE - -/* Define if you have the pselect function. */ -#undef HAVE_PSELECT - -/* Define if you have the putenv function. */ -#undef HAVE_PUTENV - -/* Define if you have the readlink function. */ -#undef HAVE_READLINK - -/* Define if you have the select function. */ -#undef HAVE_SELECT - -/* Define if you have the setenv function. */ -#undef HAVE_SETENV - -/* Define if you have the setlocale function. */ -#undef HAVE_SETLOCALE - -/* Define if you have the strcasecmp function. */ -#undef HAVE_STRCASECMP - -/* Define if you have the strcoll function. */ -#undef HAVE_STRCOLL - -#undef STRCOLL_BROKEN - -/* Define if you have the strpbrk function. */ -#undef HAVE_STRPBRK - -/* Define if you have the tcgetattr function. */ -#undef HAVE_TCGETATTR - -/* Define if you have the towlower function. */ -#undef HAVE_TOWLOWER - -/* Define if you have the towupper function. */ -#undef HAVE_TOWUPPER - -/* Define if you have the vsnprintf function. */ -#undef HAVE_VSNPRINTF - -/* Define if you have the wcrtomb function. */ -#undef HAVE_WCRTOMB - -/* Define if you have the wcscoll function. */ -#undef HAVE_WCSCOLL - -/* Define if you have the wctype function. */ -#undef HAVE_WCTYPE - -/* Define if you have the wcwidth function. */ -#undef HAVE_WCWIDTH - -/* and whether it works */ -#undef WCWIDTH_BROKEN - -#undef STDC_HEADERS - -/* Define if you have the header file. */ -#undef HAVE_DIRENT_H - -/* Define if you have the header file. */ -#undef HAVE_FCNTL_H - -/* Define if you have the header file. */ -#undef HAVE_LANGINFO_H - -/* Define if you have the header file. */ -#undef HAVE_LIBAUDIT_H - -/* Define if you have the header file. */ -#undef HAVE_LIMITS_H - -/* Define if you have the header file. */ -#undef HAVE_LOCALE_H - -/* Define if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define if you have the header file. */ -#undef HAVE_NDIR_H - -/* Define if you have the header file. */ -#undef HAVE_NCURSES_TERMCAP_H - -/* Define if you have the header file. */ -#undef HAVE_PWD_H - -/* Define if you have the header file. */ -#undef HAVE_STDARG_H - -/* Define if you have the header file. */ -#undef HAVE_STDBOOL_H - -/* Define if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define if you have the header file. */ -#undef HAVE_STRING_H - -/* Define if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_DIR_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_FILE_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_IOCTL_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_NDIR_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_PTE_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_PTEM_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_SELECT_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_STREAM_H - -/* Define if you have the header file. */ -#undef HAVE_TERMCAP_H - -/* Define if you have the header file. */ -#undef HAVE_TERMIO_H - -/* Define if you have the header file. */ -#undef HAVE_TERMIOS_H - -/* Define if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define if you have the header file. */ -#undef HAVE_VARARGS_H - -/* Define if you have the header file. */ -#undef HAVE_WCHAR_H - -/* Define if you have the header file. */ -#undef HAVE_WCTYPE_H - -#undef HAVE_MBSTATE_T - -/* Define if you have wchar_t in . */ -#undef HAVE_WCHAR_T - -/* Define if you have wctype_t in . */ -#undef HAVE_WCTYPE_T - -/* Define if you have wint_t in . */ -#undef HAVE_WINT_T - -/* Define if you have and nl_langinfo(CODESET). */ -#undef HAVE_LANGINFO_CODESET - -/* Define if you have and it defines AUDIT_USER_TTY */ -#undef HAVE_DECL_AUDIT_USER_TTY - -/* Definitions pulled in from aclocal.m4. */ -#undef VOID_SIGHANDLER - -#undef GWINSZ_IN_SYS_IOCTL - -#undef STRUCT_WINSIZE_IN_SYS_IOCTL - -#undef STRUCT_WINSIZE_IN_TERMIOS - -#undef TIOCSTAT_IN_SYS_IOCTL - -#undef FIONREAD_IN_SYS_IOCTL - -#undef SPEED_T_IN_SYS_TYPES - -#undef HAVE_GETPW_DECLS - -#undef HAVE_STRUCT_DIRENT_D_INO - -#undef HAVE_STRUCT_DIRENT_D_FILENO - -#undef HAVE_STRUCT_DIRENT_D_NAMLEN - -#undef HAVE_BSD_SIGNALS - -#undef HAVE_POSIX_SIGNALS - -#undef HAVE_USG_SIGHOLD - -#undef MUST_REINSTALL_SIGHANDLERS - -#undef HAVE_POSIX_SIGSETJMP - -#undef CTYPE_NON_ASCII - -/* modify settings or make new ones based on what autoconf tells us. */ - -/* Ultrix botches type-ahead when switching from canonical to - non-canonical mode, at least through version 4.3 */ -#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix) -# define TERMIOS_MISSING -#endif - -/* VARARGS defines moved to rlstdc.h */ diff --git a/readline/configure b/readline/configure index 0e2d333477..672c6a4b8d 100755 --- a/readline/configure +++ b/readline/configure @@ -1,9 +1,6 @@ #! /bin/sh -# From configure.ac for Readline 8.0, version 2.85. # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for readline 8.0. -# -# Report bugs to . +# Generated by GNU Autoconf 2.69 for readline UNUSED-VERSION. # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. @@ -198,8 +195,7 @@ test -x / || exit 1" as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" if (eval "$as_required") 2>/dev/null; then : as_have_required=yes else @@ -267,11 +263,10 @@ fi $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" $as_echo "$0: be upgraded to zsh 4.3.4 or later." else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: bug-readline@gnu.org about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." fi exit 1 fi @@ -581,106 +576,46 @@ MAKEFLAGS= # Identity of this package. PACKAGE_NAME='readline' PACKAGE_TARNAME='readline' -PACKAGE_VERSION='8.0' -PACKAGE_STRING='readline 8.0' -PACKAGE_BUGREPORT='bug-readline@gnu.org' +PACKAGE_VERSION='UNUSED-VERSION' +PACKAGE_STRING='readline UNUSED-VERSION' +PACKAGE_BUGREPORT='' PACKAGE_URL='' -ac_unique_file="readline.h" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - +ac_unique_file="readline/readline.c" +enable_option_checking=no ac_subst_vars='LTLIBOBJS -TERMCAP_PKG_CONFIG_LIB -TERMCAP_LIB -LIBVERSION -ARFLAGS -LOCAL_DEFS -LOCAL_LDFLAGS -LOCAL_CFLAGS -BUILD_DIR -EXAMPLES_INSTALL_TARGET -SHARED_INSTALL_TARGET -STATIC_INSTALL_TARGET -SHARED_TARGET -STATIC_TARGET -SHLIB_MINOR -SHLIB_MAJOR -SHLIB_LIBS -SHLIB_DLLVERSION -SHLIB_LIBVERSION -SHLIB_LIBSUFF -SHLIB_LIBPREF -SHLIB_DOT -SHLIB_XLDFLAGS -SHLIB_STATUS -SHOBJ_STATUS -SHOBJ_LIBS -SHOBJ_XLDFLAGS -SHOBJ_LDFLAGS -SHOBJ_LD -SHOBJ_CFLAGS -SHOBJ_CC LIBOBJS -MAKE_SHELL -RANLIB -AR +subdirs +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc INSTALL_DATA INSTALL_SCRIPT INSTALL_PROGRAM -EGREP -GREP -CPP -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -SET_MAKE -CROSS_COMPILE -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build target_alias host_alias build_alias @@ -722,22 +657,13 @@ SHELL' ac_subst_files='' ac_user_opts=' enable_option_checking -with_curses -enable_multibyte -enable_static -enable_install_examples -enable_largefile +enable_silent_rules +enable_maintainer_mode ' ac_precious_vars='build_alias host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - +target_alias' +ac_subdirs_all='readline' # Initialize some variables set by options. ac_init_help= @@ -1277,7 +1203,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures readline 8.0 to adapt to many kinds of systems. +\`configure' configures readline UNUSED-VERSION to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1334,15 +1260,16 @@ _ACEOF cat <<\_ACEOF -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names _ACEOF fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of readline 8.0:";; + short | recursive ) echo "Configuration of readline UNUSED-VERSION:";; esac cat <<\_ACEOF @@ -1350,32 +1277,13 @@ Optional Features: --disable-option-checking ignore unrecognized --enable/--with options --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-multibyte enable multibyte characters if OS supports them - --enable-static build static libraries [[default=YES]] - --disable-install-examples - don't install examples [[default=install]] - --disable-largefile omit support for large files - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-curses use the curses library instead of the termcap - library - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + +Report bugs to the package provider. _ACEOF ac_status=$? fi @@ -1438,7 +1346,7 @@ fi test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -readline configure 8.0 +readline configure UNUSED-VERSION generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1451,646 +1359,11 @@ fi ## ------------------------ ## ## Autoconf initialization. ## ## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ----------------------------------- ## -## Report this to bug-readline@gnu.org ## -## ----------------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES -# --------------------------------------------- -# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR -# accordingly. -ac_fn_c_check_decl () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - as_decl_name=`echo $2|sed 's/ *(.*//'` - as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 -$as_echo_n "checking whether $as_decl_name is declared... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -#ifndef $as_decl_name -#ifdef __cplusplus - (void) $as_decl_use; -#else - (void) $as_decl_name; -#endif -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_decl - -# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES -# -------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_c_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid; break -else - as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=$ac_mid; break -else - as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - ac_lo= ac_hi= -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid -else - as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval () { return $2; } -static unsigned long int ulongval () { return $2; } -#include -#include -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo >>conftest.val; read $3 config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by readline $as_me 8.0, which was +It was created by readline $as_me UNUSED-VERSION, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2442,11 +1715,8 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - ac_aux_dir= -for ac_dir in `cd $srcdir;pwd`/.. "$srcdir"/`cd $srcdir;pwd`/..; do +for ac_dir in .. "$srcdir"/..; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -2462,7 +1732,7 @@ for ac_dir in `cd $srcdir;pwd`/.. "$srcdir"/`cd $srcdir;pwd`/..; do fi done if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \`cd $srcdir;pwd\`/.. \"$srcdir\"/\`cd $srcdir;pwd\`/.." "$LINENO" 5 + as_fn_error $? "cannot find install-sh, install.sh, or shtool in .. \"$srcdir\"/.." "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2474,394 +1744,222 @@ ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. -ac_config_headers="$ac_config_headers config.h" - +am__api_version='1.15' -LIBVERSION=8.0 - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : $as_echo_n "(cached) " >&6 else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - - -opt_curses=no - -# Check whether --with-curses was given. -if test "${with_curses+set}" = set; then : - withval=$with_curses; opt_curses=$withval -fi + done +IFS=$as_save_IFS +rm -rf conftest.one conftest.two conftest.dir -if test "$opt_curses" = "yes"; then - prefer_curses=yes fi - -opt_multibyte=yes -opt_static_libs=yes -opt_shared_libs=no -opt_install_examples=no - -# Check whether --enable-multibyte was given. -if test "${enable_multibyte+set}" = set; then : - enableval=$enable_multibyte; opt_multibyte=$enableval + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; opt_static_libs=$enableval -fi +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -# Check whether --enable-install-examples was given. -if test "${enable_install_examples+set}" = set; then : - enableval=$enable_install_examples; opt_install_examples=$enableval -fi +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -if test $opt_multibyte = no; then -$as_echo "#define NO_MULTIBYTE_SUPPORT 1" >>confdefs.h - -fi - - - -CROSS_COMPILE= -if test "x$cross_compiling" = "xyes"; then - case "${host}" in - *-cygwin*) - cross_cache=${srcdir}/cross-build/cygwin.cache - ;; - *-mingw*) - cross_cache=${srcdir}/cross-build/mingw.cache - ;; - i[3456]86-*-beos*) - cross_cache=${srcdir}/cross-build/x86-beos.cache - ;; - *) echo "configure: cross-compiling for $host is not supported" >&2 - ;; - esac - if test -n "${cross_cache}" && test -r "${cross_cache}"; then - echo "loading cross-build cache file ${cross_cache}" - . ${cross_cache} - fi - unset cross_cache - CROSS_COMPILE='-DCROSS_COMPILING' - -fi - -echo "" -echo "Beginning configuration for readline-$LIBVERSION for ${host_cpu}-${host_vendor}-${host_os}" -echo "" - -# We want these before the checks, so the checks can modify their values. -test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# Expand $ac_aux_dir to an absolute path. +am_aux_dir=`cd "$ac_aux_dir" && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } +if test x"${install_sh+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac fi - -fi -if test -z "$CC"; then +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : +if ${ac_cv_prog_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -2870,7 +1968,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + ac_cv_prog_STRIP="${ac_tool_prefix}strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -2880,32 +1978,28 @@ IFS=$as_save_IFS fi fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - test -n "$CC" && break - done fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 $as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : $as_echo_n "(cached) " >&6 else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. else as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -2914,7 +2008,7 @@ do test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" + ac_cv_prog_ac_ct_STRIP="strip" $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fi @@ -2924,21 +2018,17 @@ IFS=$as_save_IFS fi fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } else { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } fi - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" + if test "x$ac_ct_STRIP" = x; then + STRIP=":" else case $cross_compiling:$ac_tool_warned in yes:) @@ -2946,3962 +2036,322 @@ yes:) $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} ac_tool_warned=yes ;; esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 + STRIP=$ac_ct_STRIP fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } + STRIP="$ac_cv_prog_STRIP" fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done done IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" -if test "x$ac_cv_header_minix_config_h" = xyes; then : - MINIX=yes -else - MINIX= -fi - - - if test "$MINIX" = yes; then - -$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h - - -$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h - - -$as_echo "#define _MINIX 1" >>confdefs.h - - fi - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 -$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } -if ${ac_cv_safe_to_define___extensions__+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -# define __EXTENSIONS__ 1 - $ac_includes_default -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_safe_to_define___extensions__=yes -else - ac_cv_safe_to_define___extensions__=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 -$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } - test $ac_cv_safe_to_define___extensions__ = yes && - $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h - - $as_echo "#define _ALL_SOURCE 1" >>confdefs.h - - $as_echo "#define _GNU_SOURCE 1" >>confdefs.h - - $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h - - $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h - - - - -# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. -test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" - -if test $ac_cv_c_compiler_gnu = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 -$as_echo_n "checking whether $CC needs -traditional... " >&6; } -if ${ac_cv_prog_gcc_traditional+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_pattern="Autoconf.*'x'" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TIOCGETP -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -else - ac_cv_prog_gcc_traditional=no -fi -rm -f conftest* - - - if test $ac_cv_prog_gcc_traditional = no; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TCGETA -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -fi -rm -f conftest* - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 -$as_echo "$ac_cv_prog_gcc_traditional" >&6; } - if test $ac_cv_prog_gcc_traditional = yes; then - CC="$CC -traditional" - fi -fi - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - -test -n "$ARFLAGS" || ARFLAGS="cr" -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - -MAKE_SHELL=/bin/sh - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifndef __cplusplus - /* Ultrix mips cc rejects this sort of thing. */ - typedef int charset[2]; - const charset cs = { 0, 0 }; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this sort of thing. */ - char tx; - char *t = &tx; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; } bx; - struct s *b = &bx; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 -$as_echo_n "checking for function prototypes... " >&6; } -if test "$ac_cv_prog_cc_c89" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - -$as_echo "#define PROTOTYPES 1" >>confdefs.h - - -$as_echo "#define __PROTOTYPES 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether char is unsigned" >&5 -$as_echo_n "checking whether char is unsigned... " >&6; } -if ${ac_cv_c_char_unsigned+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !(((char) -1) < 0)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_char_unsigned=no -else - ac_cv_c_char_unsigned=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_char_unsigned" >&5 -$as_echo "$ac_cv_c_char_unsigned" >&6; } -if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then - $as_echo "#define __CHAR_UNSIGNED__ 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5 -$as_echo_n "checking for working volatile... " >&6; } -if ${ac_cv_c_volatile+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -volatile int x; -int * volatile y = (int *) 0; -return !x && !y; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_volatile=yes -else - ac_cv_c_volatile=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5 -$as_echo "$ac_cv_c_volatile" >&6; } -if test $ac_cv_c_volatile = no; then - -$as_echo "#define volatile /**/" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 -$as_echo_n "checking return type of signal handlers... " >&6; } -if ${ac_cv_type_signal+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include - -int -main () -{ -return *(signal (0, 0)) (0) == 1; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_type_signal=int -else - ac_cv_type_signal=void -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 -$as_echo "$ac_cv_type_signal" >&6; } - -cat >>confdefs.h <<_ACEOF -#define RETSIGTYPE $ac_cv_type_signal -_ACEOF - - - -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - -ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" -if test "x$ac_cv_type_ssize_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define ssize_t int -_ACEOF - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 -$as_echo_n "checking whether stat file-mode macros are broken... " >&6; } -if ${ac_cv_header_stat_broken+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include - -#if defined S_ISBLK && defined S_IFDIR -extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; -#endif - -#if defined S_ISBLK && defined S_IFCHR -extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; -#endif - -#if defined S_ISLNK && defined S_IFREG -extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; -#endif - -#if defined S_ISSOCK && defined S_IFREG -extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; -#endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stat_broken=no -else - ac_cv_header_stat_broken=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 -$as_echo "$ac_cv_header_stat_broken" >&6; } -if test $ac_cv_header_stat_broken = yes; then - -$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h - -fi - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do - as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 -$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } -if eval \${$as_ac_Header+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include <$ac_hdr> - -int -main () -{ -if ((DIR *) 0) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_ac_Header=yes" -else - eval "$as_ac_Header=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$as_ac_Header - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -_ACEOF - -ac_header_dirent=$ac_hdr; break -fi - -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' dir; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' x; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -fi - - -for ac_func in fcntl kill lstat readlink -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -for ac_func in fnmatch memmove pselect putenv select setenv setlocale \ - strcasecmp strpbrk tcgetattr vsnprintf -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -for ac_func in isascii isxdigit -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -for ac_func in getpwent getpwnam getpwuid -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 -$as_echo_n "checking for uid_t in sys/types.h... " >&6; } -if ${ac_cv_type_uid_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "uid_t" >/dev/null 2>&1; then : - ac_cv_type_uid_t=yes -else - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 -$as_echo "$ac_cv_type_uid_t" >&6; } -if test $ac_cv_type_uid_t = no; then - -$as_echo "#define uid_t int" >>confdefs.h - - -$as_echo "#define gid_t int" >>confdefs.h - -fi - -for ac_header in unistd.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default" -if test "x$ac_cv_header_unistd_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_UNISTD_H 1 -_ACEOF - -fi - -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working chown" >&5 -$as_echo_n "checking for working chown... " >&6; } -if ${ac_cv_func_chown_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_chown_works=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -#include - -int -main () -{ - char *f = "conftest.chown"; - struct stat before, after; - - if (creat (f, 0600) < 0) - return 1; - if (stat (f, &before) < 0) - return 1; - if (chown (f, (uid_t) -1, (gid_t) -1) == -1) - return 1; - if (stat (f, &after) < 0) - return 1; - return ! (before.st_uid == after.st_uid && before.st_gid == after.st_gid); - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_chown_works=yes -else - ac_cv_func_chown_works=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -rm -f conftest.chown - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_chown_works" >&5 -$as_echo "$ac_cv_func_chown_works" >&6; } -if test $ac_cv_func_chown_works = yes; then - -$as_echo "#define HAVE_CHOWN 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5 -$as_echo_n "checking for working strcoll... " >&6; } -if ${ac_cv_func_strcoll_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_strcoll_works=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -return (strcoll ("abc", "def") >= 0 || - strcoll ("ABC", "DEF") >= 0 || - strcoll ("123", "456") >= 0) - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_strcoll_works=yes -else - ac_cv_func_strcoll_works=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5 -$as_echo "$ac_cv_func_strcoll_works" >&6; } -if test $ac_cv_func_strcoll_works = yes; then - -$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h - -fi - - -for ac_header in fcntl.h unistd.h stdlib.h varargs.h stdarg.h stdbool.h \ - string.h strings.h \ - limits.h locale.h pwd.h memory.h termcap.h termios.h termio.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -for ac_header in sys/ioctl.h sys/pte.h sys/stream.h sys/select.h sys/file.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in sys/ptem.h -do : - ac_fn_c_check_header_compile "$LINENO" "sys/ptem.h" "ac_cv_header_sys_ptem_h" " -#if HAVE_SYS_STREAM_H -# include -#endif - -" -if test "x$ac_cv_header_sys_ptem_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_SYS_PTEM_H 1 -_ACEOF - -fi - -done - - -# Check whether --enable-largefile was given. -if test "${enable_largefile+set}" = set; then : - enableval=$enable_largefile; -fi - -if test "$enable_largefile" != no; then - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 -$as_echo_n "checking for special C compiler options needed for large files... " >&6; } -if ${ac_cv_sys_largefile_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_sys_largefile_CC=no - if test "$GCC" != yes; then - ac_save_CC=$CC - while :; do - # IRIX 6.2 and later do not support large files by default, - # so use the C compiler's -n32 option if that helps. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF - if ac_fn_c_try_compile "$LINENO"; then : - break -fi -rm -f core conftest.err conftest.$ac_objext - CC="$CC -n32" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_largefile_CC=' -n32'; break -fi -rm -f core conftest.err conftest.$ac_objext - break - done - CC=$ac_save_CC - rm -f conftest.$ac_ext - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5 -$as_echo "$ac_cv_sys_largefile_CC" >&6; } - if test "$ac_cv_sys_largefile_CC" != no; then - CC=$CC$ac_cv_sys_largefile_CC - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 -$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } -if ${ac_cv_sys_file_offset_bits+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=no; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _FILE_OFFSET_BITS 64 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=64; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_file_offset_bits=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 -$as_echo "$ac_cv_sys_file_offset_bits" >&6; } -case $ac_cv_sys_file_offset_bits in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits -_ACEOF -;; -esac -rm -rf conftest* - if test $ac_cv_sys_file_offset_bits = unknown; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 -$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } -if ${ac_cv_sys_large_files+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=no; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGE_FILES 1 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=1; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_large_files=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 -$as_echo "$ac_cv_sys_large_files" >&6; } -case $ac_cv_sys_large_files in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _LARGE_FILES $ac_cv_sys_large_files -_ACEOF -;; -esac -rm -rf conftest* - fi - - -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of signal functions" >&5 -$as_echo_n "checking for type of signal functions... " >&6; } -if ${bash_cv_signal_vintage+:} false; then : - $as_echo_n "(cached) " >&6 -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ - - sigset_t ss; - struct sigaction sa; - sigemptyset(&ss); sigsuspend(&ss); - sigaction(SIGINT, &sa, (struct sigaction *) 0); - sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - bash_cv_signal_vintage=posix -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ - - int mask = sigmask(SIGINT); - sigsetmask(mask); sigblock(mask); sigpause(mask); - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - bash_cv_signal_vintage=4.2bsd -else - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #include - RETSIGTYPE foo() { } -int -main () -{ - - int mask = sigmask(SIGINT); - sigset(SIGINT, foo); sigrelse(SIGINT); - sighold(SIGINT); sigpause(SIGINT); - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - bash_cv_signal_vintage=svr3 -else - bash_cv_signal_vintage=v7 - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_signal_vintage" >&5 -$as_echo "$bash_cv_signal_vintage" >&6; } -if test "$bash_cv_signal_vintage" = posix; then -$as_echo "#define HAVE_POSIX_SIGNALS 1" >>confdefs.h - -elif test "$bash_cv_signal_vintage" = "4.2bsd"; then -$as_echo "#define HAVE_BSD_SIGNALS 1" >>confdefs.h - -elif test "$bash_cv_signal_vintage" = svr3; then -$as_echo "#define HAVE_USG_SIGHOLD 1" >>confdefs.h - -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if signal handlers must be reinstalled when invoked" >&5 -$as_echo_n "checking if signal handlers must be reinstalled when invoked... " >&6; } -if ${bash_cv_must_reinstall_sighandlers+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&5 -$as_echo "$as_me: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&2;} - bash_cv_must_reinstall_sighandlers=no - -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifdef HAVE_UNISTD_H -#include -#endif - -typedef RETSIGTYPE sigfunc(); - -volatile int nsigint; - -#ifdef HAVE_POSIX_SIGNALS -sigfunc * -set_signal_handler(sig, handler) - int sig; - sigfunc *handler; -{ - struct sigaction act, oact; - act.sa_handler = handler; - act.sa_flags = 0; - sigemptyset (&act.sa_mask); - sigemptyset (&oact.sa_mask); - sigaction (sig, &act, &oact); - return (oact.sa_handler); -} -#else -#define set_signal_handler(s, h) signal(s, h) -#endif - -RETSIGTYPE -sigint(s) -int s; -{ - nsigint++; -} - -main() -{ - nsigint = 0; - set_signal_handler(SIGINT, sigint); - kill((int)getpid(), SIGINT); - kill((int)getpid(), SIGINT); - exit(nsigint != 2); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - bash_cv_must_reinstall_sighandlers=no -else - bash_cv_must_reinstall_sighandlers=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_must_reinstall_sighandlers" >&5 -$as_echo "$bash_cv_must_reinstall_sighandlers" >&6; } -if test $bash_cv_must_reinstall_sighandlers = yes; then -$as_echo "#define MUST_REINSTALL_SIGHANDLERS 1" >>confdefs.h - -fi - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for presence of POSIX-style sigsetjmp/siglongjmp" >&5 -$as_echo_n "checking for presence of POSIX-style sigsetjmp/siglongjmp... " >&6; } -if ${bash_cv_func_sigsetjmp+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&5 -$as_echo "$as_me: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&2;} - bash_cv_func_sigsetjmp=missing - -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef HAVE_UNISTD_H -#include -#endif -#include -#include -#include - -main() -{ -#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) -exit (1); -#else - -int code; -sigset_t set, oset; -sigjmp_buf xx; - -/* get the mask */ -sigemptyset(&set); -sigemptyset(&oset); -sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); -sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); - -/* save it */ -code = sigsetjmp(xx, 1); -if (code) - exit(0); /* could get sigmask and compare to oset here. */ - -/* change it */ -sigaddset(&set, SIGINT); -sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); - -/* and siglongjmp */ -siglongjmp(xx, 10); -exit(1); -#endif -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - bash_cv_func_sigsetjmp=present -else - bash_cv_func_sigsetjmp=missing -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_sigsetjmp" >&5 -$as_echo "$bash_cv_func_sigsetjmp" >&6; } -if test $bash_cv_func_sigsetjmp = present; then -$as_echo "#define HAVE_POSIX_SIGSETJMP 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for lstat" >&5 -$as_echo_n "checking for lstat... " >&6; } -if ${bash_cv_func_lstat+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ - lstat(".",(struct stat *)0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - bash_cv_func_lstat=yes -else - bash_cv_func_lstat=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_lstat" >&5 -$as_echo "$bash_cv_func_lstat" >&6; } -if test $bash_cv_func_lstat = yes; then - $as_echo "#define HAVE_LSTAT 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether or not strcoll and strcmp differ" >&5 -$as_echo_n "checking whether or not strcoll and strcmp differ... " >&6; } -if ${bash_cv_func_strcoll_broken+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&5 -$as_echo "$as_me: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&2;} - bash_cv_func_strcoll_broken=no - -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#if defined (HAVE_LOCALE_H) -#include -#endif - -main(c, v) -int c; -char *v[]; -{ - int r1, r2; - char *deflocale, *defcoll; - -#ifdef HAVE_SETLOCALE - deflocale = setlocale(LC_ALL, ""); - defcoll = setlocale(LC_COLLATE, ""); -#endif - -#ifdef HAVE_STRCOLL - /* These two values are taken from tests/glob-test. */ - r1 = strcoll("abd", "aXd"); -#else - r1 = 0; -#endif - r2 = strcmp("abd", "aXd"); - - /* These two should both be greater than 0. It is permissible for - a system to return different values, as long as the sign is the - same. */ - - /* Exit with 1 (failure) if these two values are both > 0, since - this tests whether strcoll(3) is broken with respect to strcmp(3) - in the default locale. */ - exit (r1 > 0 && r2 > 0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - bash_cv_func_strcoll_broken=yes -else - bash_cv_func_strcoll_broken=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_strcoll_broken" >&5 -$as_echo "$bash_cv_func_strcoll_broken" >&6; } -if test $bash_cv_func_strcoll_broken = yes; then -$as_echo "#define STRCOLL_BROKEN 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the ctype macros accept non-ascii characters" >&5 -$as_echo_n "checking whether the ctype macros accept non-ascii characters... " >&6; } -if ${bash_cv_func_ctype_nonascii+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&5 -$as_echo "$as_me: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&2;} - bash_cv_func_ctype_nonascii=no - -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef HAVE_LOCALE_H -#include -#endif -#include -#include - -main(c, v) -int c; -char *v[]; -{ - char *deflocale; - unsigned char x; - int r1, r2; - -#ifdef HAVE_SETLOCALE - /* We take a shot here. If that locale is not known, try the - system default. We try this one because '\342' (226) is - known to be a printable character in that locale. */ - deflocale = setlocale(LC_ALL, "en_US.ISO8859-1"); - if (deflocale == 0) - deflocale = setlocale(LC_ALL, ""); -#endif - - x = '\342'; - r1 = isprint(x); - x -= 128; - r2 = isprint(x); - exit (r1 == 0 || r2 == 0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - bash_cv_func_ctype_nonascii=yes -else - bash_cv_func_ctype_nonascii=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_ctype_nonascii" >&5 -$as_echo "$bash_cv_func_ctype_nonascii" >&6; } -if test $bash_cv_func_ctype_nonascii = yes; then -$as_echo "#define CTYPE_NON_ASCII 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpw functions are declared in pwd.h" >&5 -$as_echo_n "checking whether getpw functions are declared in pwd.h... " >&6; } -if ${bash_cv_getpw_declared+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#ifdef HAVE_UNISTD_H -# include -#endif -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "getpwuid" >/dev/null 2>&1; then : - bash_cv_getpw_declared=yes -else - bash_cv_getpw_declared=no -fi -rm -f conftest* - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_getpw_declared" >&5 -$as_echo "$bash_cv_getpw_declared" >&6; } -if test $bash_cv_getpw_declared = yes; then -$as_echo "#define HAVE_GETPW_DECLS 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether termios.h defines TIOCGWINSZ" >&5 -$as_echo_n "checking whether termios.h defines TIOCGWINSZ... " >&6; } -if ${ac_cv_sys_tiocgwinsz_in_termios_h+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#ifdef TIOCGWINSZ - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then : - ac_cv_sys_tiocgwinsz_in_termios_h=yes -else - ac_cv_sys_tiocgwinsz_in_termios_h=no -fi -rm -f conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_termios_h" >&5 -$as_echo "$ac_cv_sys_tiocgwinsz_in_termios_h" >&6; } - -if test $ac_cv_sys_tiocgwinsz_in_termios_h != yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/ioctl.h defines TIOCGWINSZ" >&5 -$as_echo_n "checking whether sys/ioctl.h defines TIOCGWINSZ... " >&6; } -if ${ac_cv_sys_tiocgwinsz_in_sys_ioctl_h+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#ifdef TIOCGWINSZ - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then : - ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=yes -else - ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=no -fi -rm -f conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&5 -$as_echo "$ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&6; } - - if test $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h = yes; then - -$as_echo "#define GWINSZ_IN_SYS_IOCTL 1" >>confdefs.h - - fi -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sig_atomic_t in signal.h" >&5 -$as_echo_n "checking for sig_atomic_t in signal.h... " >&6; } -if ${ac_cv_have_sig_atomic_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include - -int -main () -{ - sig_atomic_t x; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_have_sig_atomic_t=yes -else - ac_cv_have_sig_atomic_t=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_have_sig_atomic_t" >&5 -$as_echo "$ac_cv_have_sig_atomic_t" >&6; } -if test "$ac_cv_have_sig_atomic_t" = "no" -then - ac_fn_c_check_type "$LINENO" "sig_atomic_t" "ac_cv_type_sig_atomic_t" "$ac_includes_default" -if test "x$ac_cv_type_sig_atomic_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define sig_atomic_t int -_ACEOF - -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether signal handlers are of type void" >&5 -$as_echo_n "checking whether signal handlers are of type void... " >&6; } -if ${bash_cv_void_sighandler+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#ifdef signal -#undef signal -#endif -#ifdef __cplusplus -extern "C" -#endif -void (*signal ()) (); -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_void_sighandler=yes -else - bash_cv_void_sighandler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_void_sighandler" >&5 -$as_echo "$bash_cv_void_sighandler" >&6; } -if test $bash_cv_void_sighandler = yes; then -$as_echo "#define VOID_SIGHANDLER 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIOCSTAT in sys/ioctl.h" >&5 -$as_echo_n "checking for TIOCSTAT in sys/ioctl.h... " >&6; } -if ${bash_cv_tiocstat_in_ioctl+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -int x = TIOCSTAT; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_tiocstat_in_ioctl=yes -else - bash_cv_tiocstat_in_ioctl=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_tiocstat_in_ioctl" >&5 -$as_echo "$bash_cv_tiocstat_in_ioctl" >&6; } -if test $bash_cv_tiocstat_in_ioctl = yes; then -$as_echo "#define TIOCSTAT_IN_SYS_IOCTL 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FIONREAD in sys/ioctl.h" >&5 -$as_echo_n "checking for FIONREAD in sys/ioctl.h... " >&6; } -if ${bash_cv_fionread_in_ioctl+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -int x = FIONREAD; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_fionread_in_ioctl=yes -else - bash_cv_fionread_in_ioctl=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_fionread_in_ioctl" >&5 -$as_echo "$bash_cv_fionread_in_ioctl" >&6; } -if test $bash_cv_fionread_in_ioctl = yes; then -$as_echo "#define FIONREAD_IN_SYS_IOCTL 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for speed_t in sys/types.h" >&5 -$as_echo_n "checking for speed_t in sys/types.h... " >&6; } -if ${bash_cv_speed_t_in_sys_types+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -speed_t x; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_speed_t_in_sys_types=yes -else - bash_cv_speed_t_in_sys_types=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_speed_t_in_sys_types" >&5 -$as_echo "$bash_cv_speed_t_in_sys_types" >&6; } -if test $bash_cv_speed_t_in_sys_types = yes; then -$as_echo "#define SPEED_T_IN_SYS_TYPES 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct winsize in sys/ioctl.h and termios.h" >&5 -$as_echo_n "checking for struct winsize in sys/ioctl.h and termios.h... " >&6; } -if ${bash_cv_struct_winsize_header+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -struct winsize x; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_struct_winsize_header=ioctl_h -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -int -main () -{ -struct winsize x; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_struct_winsize_header=termios_h -else - bash_cv_struct_winsize_header=other -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -if test $bash_cv_struct_winsize_header = ioctl_h; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: sys/ioctl.h" >&5 -$as_echo "sys/ioctl.h" >&6; } - $as_echo "#define STRUCT_WINSIZE_IN_SYS_IOCTL 1" >>confdefs.h - -elif test $bash_cv_struct_winsize_header = termios_h; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: termios.h" >&5 -$as_echo "termios.h" >&6; } - $as_echo "#define STRUCT_WINSIZE_IN_TERMIOS 1" >>confdefs.h - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 -$as_echo "not found" >&6; } -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_ino" >&5 -$as_echo_n "checking for struct dirent.d_ino... " >&6; } -if ${bash_cv_dirent_has_dino+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ - -int -main () -{ - -struct dirent d; int z; z = d.d_ino; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_dirent_has_dino=yes -else - bash_cv_dirent_has_dino=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_dino" >&5 -$as_echo "$bash_cv_dirent_has_dino" >&6; } -if test $bash_cv_dirent_has_dino = yes; then -$as_echo "#define HAVE_STRUCT_DIRENT_D_INO 1" >>confdefs.h - -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_fileno" >&5 -$as_echo_n "checking for struct dirent.d_fileno... " >&6; } -if ${bash_cv_dirent_has_d_fileno+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -#ifdef HAVE_UNISTD_H -# include -#endif /* HAVE_UNISTD_H */ -#if defined(HAVE_DIRENT_H) -# include -#else -# define dirent direct -# ifdef HAVE_SYS_NDIR_H -# include -# endif /* SYSNDIR */ -# ifdef HAVE_SYS_DIR_H -# include -# endif /* SYSDIR */ -# ifdef HAVE_NDIR_H -# include -# endif -#endif /* HAVE_DIRENT_H */ - -int -main () -{ - -struct dirent d; int z; z = d.d_fileno; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_dirent_has_d_fileno=yes -else - bash_cv_dirent_has_d_fileno=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_d_fileno" >&5 -$as_echo "$bash_cv_dirent_has_d_fileno" >&6; } -if test $bash_cv_dirent_has_d_fileno = yes; then -$as_echo "#define HAVE_STRUCT_DIRENT_D_FILENO 1" >>confdefs.h - -fi - - -for ac_header in libaudit.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "libaudit.h" "ac_cv_header_libaudit_h" "$ac_includes_default" -if test "x$ac_cv_header_libaudit_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LIBAUDIT_H 1 -_ACEOF - -fi - -done - -ac_fn_c_check_decl "$LINENO" "AUDIT_USER_TTY" "ac_cv_have_decl_AUDIT_USER_TTY" "#include -" -if test "x$ac_cv_have_decl_AUDIT_USER_TTY" = xyes; then : - ac_have_decl=1 -else - ac_have_decl=0 -fi - -cat >>confdefs.h <<_ACEOF -#define HAVE_DECL_AUDIT_USER_TTY $ac_have_decl -_ACEOF - - -case "$host_os" in -aix*) prefer_curses=yes ;; -esac - -if test "X$bash_cv_termcap_lib" = "X"; then -_bash_needmsg=yes -else -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5 -$as_echo_n "checking which library has the termcap functions... " >&6; } -_bash_needmsg= -fi -if ${bash_cv_termcap_lib+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_fn_c_check_func "$LINENO" "tgetent" "ac_cv_func_tgetent" -if test "x$ac_cv_func_tgetent" = xyes; then : - bash_cv_termcap_lib=libc -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5 -$as_echo_n "checking for tgetent in -ltermcap... " >&6; } -if ${ac_cv_lib_termcap_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ltermcap $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_termcap_tgetent=yes -else - ac_cv_lib_termcap_tgetent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5 -$as_echo "$ac_cv_lib_termcap_tgetent" >&6; } -if test "x$ac_cv_lib_termcap_tgetent" = xyes; then : - bash_cv_termcap_lib=libtermcap -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5 -$as_echo_n "checking for tgetent in -ltinfo... " >&6; } -if ${ac_cv_lib_tinfo_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ltinfo $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_tinfo_tgetent=yes -else - ac_cv_lib_tinfo_tgetent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5 -$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; } -if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then : - bash_cv_termcap_lib=libtinfo -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5 -$as_echo_n "checking for tgetent in -lcurses... " >&6; } -if ${ac_cv_lib_curses_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lcurses $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_curses_tgetent=yes -else - ac_cv_lib_curses_tgetent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tgetent" >&5 -$as_echo "$ac_cv_lib_curses_tgetent" >&6; } -if test "x$ac_cv_lib_curses_tgetent" = xyes; then : - bash_cv_termcap_lib=libcurses -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5 -$as_echo_n "checking for tgetent in -lncurses... " >&6; } -if ${ac_cv_lib_ncurses_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lncurses $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ncurses_tgetent=yes -else - ac_cv_lib_ncurses_tgetent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5 -$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; } -if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then : - bash_cv_termcap_lib=libncurses -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncursesw" >&5 -$as_echo_n "checking for tgetent in -lncursesw... " >&6; } -if ${ac_cv_lib_ncursesw_tgetent+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lncursesw $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char tgetent (); -int -main () -{ -return tgetent (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ncursesw_tgetent=yes -else - ac_cv_lib_ncursesw_tgetent=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_tgetent" >&5 -$as_echo "$ac_cv_lib_ncursesw_tgetent" >&6; } -if test "x$ac_cv_lib_ncursesw_tgetent" = xyes; then : - bash_cv_termcap_lib=libncursesw -else - bash_cv_termcap_lib=gnutermcap -fi - -fi - -fi - -fi - -fi - -fi - -fi - -if test "X$_bash_needmsg" = "Xyes"; then -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5 -$as_echo_n "checking which library has the termcap functions... " >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using $bash_cv_termcap_lib" >&5 -$as_echo "using $bash_cv_termcap_lib" >&6; } -if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then -LDFLAGS="$LDFLAGS -L./lib/termcap" -TERMCAP_LIB="./lib/termcap/libtermcap.a" -TERMCAP_DEP="./lib/termcap/libtermcap.a" -elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then -TERMCAP_LIB=-ltermcap -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libtinfo; then -TERMCAP_LIB=-ltinfo -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libncurses; then -TERMCAP_LIB=-lncurses -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libc; then -TERMCAP_LIB= -TERMCAP_DEP= -else -TERMCAP_LIB=-lcurses -TERMCAP_DEP= -fi - -if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then - if test "$prefer_curses" = yes; then - TERMCAP_LIB=-lcurses - else - TERMCAP_LIB=-ltermcap #default - fi -fi -# Windows ncurses installation -if test "$TERMCAP_LIB" = "-lncurses"; then - for ac_header in ncurses/termcap.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "ncurses/termcap.h" "ac_cv_header_ncurses_termcap_h" "$ac_includes_default" -if test "x$ac_cv_header_ncurses_termcap_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_NCURSES_TERMCAP_H 1 -_ACEOF - -fi - -done - -fi - -case "$TERMCAP_LIB" in --ltinfo) TERMCAP_PKG_CONFIG_LIB=tinfo ;; --lcurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; --lncurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; --ltermcap) TERMCAP_PKG_CONFIG_LIB=termcap ;; -*) TERMCAP_PKG_CONFIG_LIB=termcap ;; -esac - - -for ac_header in wctype.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "wctype.h" "ac_cv_header_wctype_h" "$ac_includes_default" -if test "x$ac_cv_header_wctype_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_WCTYPE_H 1 -_ACEOF - -fi - -done - -for ac_header in wchar.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "wchar.h" "ac_cv_header_wchar_h" "$ac_includes_default" -if test "x$ac_cv_header_wchar_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_WCHAR_H 1 -_ACEOF - -fi - -done - -for ac_header in langinfo.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "langinfo.h" "ac_cv_header_langinfo_h" "$ac_includes_default" -if test "x$ac_cv_header_langinfo_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LANGINFO_H 1 -_ACEOF - -fi - -done - - -for ac_header in mbstr.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "mbstr.h" "ac_cv_header_mbstr_h" "$ac_includes_default" -if test "x$ac_cv_header_mbstr_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_MBSTR_H 1 -_ACEOF - -fi - -done - - -ac_fn_c_check_func "$LINENO" "mbrlen" "ac_cv_func_mbrlen" -if test "x$ac_cv_func_mbrlen" = xyes; then : - $as_echo "#define HAVE_MBRLEN 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "mbscasecmp" "ac_cv_func_mbscasecmp" -if test "x$ac_cv_func_mbscasecmp" = xyes; then : - $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "mbscmp" "ac_cv_func_mbscmp" -if test "x$ac_cv_func_mbscmp" = xyes; then : - $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "mbsnrtowcs" "ac_cv_func_mbsnrtowcs" -if test "x$ac_cv_func_mbsnrtowcs" = xyes; then : - $as_echo "#define HAVE_MBSNRTOWCS 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "mbsrtowcs" "ac_cv_func_mbsrtowcs" -if test "x$ac_cv_func_mbsrtowcs" = xyes; then : - $as_echo "#define HAVE_MBSRTOWCS 1" >>confdefs.h - -fi - - -ac_fn_c_check_func "$LINENO" "mbschr" "ac_cv_func_mbschr" -if test "x$ac_cv_func_mbschr" = xyes; then : - $as_echo "#define HAVE_MBSCHR 1" >>confdefs.h - -else - case " $LIBOBJS " in - *" mbschr.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS mbschr.$ac_objext" - ;; -esac - -fi - - - -ac_fn_c_check_func "$LINENO" "wcrtomb" "ac_cv_func_wcrtomb" -if test "x$ac_cv_func_wcrtomb" = xyes; then : - $as_echo "#define HAVE_WCRTOMB 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "wcscoll" "ac_cv_func_wcscoll" -if test "x$ac_cv_func_wcscoll" = xyes; then : - $as_echo "#define HAVE_WCSCOLL 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "wcsdup" "ac_cv_func_wcsdup" -if test "x$ac_cv_func_wcsdup" = xyes; then : - $as_echo "#define HAVE_WCSDUP 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "wcwidth" "ac_cv_func_wcwidth" -if test "x$ac_cv_func_wcwidth" = xyes; then : - $as_echo "#define HAVE_WCWIDTH 1" >>confdefs.h - -fi - -ac_fn_c_check_func "$LINENO" "wctype" "ac_cv_func_wctype" -if test "x$ac_cv_func_wctype" = xyes; then : - $as_echo "#define HAVE_WCTYPE 1" >>confdefs.h - -fi - - -ac_fn_c_check_func "$LINENO" "wcswidth" "ac_cv_func_wcswidth" -if test "x$ac_cv_func_wcswidth" = xyes; then : - $as_echo "#define HAVE_WCSWIDTH 1" >>confdefs.h - -else - case " $LIBOBJS " in - *" wcswidth.$ac_objext "* ) ;; - *) LIBOBJS="$LIBOBJS wcswidth.$ac_objext" - ;; -esac - -fi - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5 -$as_echo_n "checking whether mbrtowc and mbstate_t are properly declared... " >&6; } -if ${ac_cv_func_mbrtowc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -wchar_t wc; - char const s[] = ""; - size_t n = 1; - mbstate_t state; - return ! (sizeof state && (mbrtowc) (&wc, s, n, &state)); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_func_mbrtowc=yes -else - ac_cv_func_mbrtowc=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5 -$as_echo "$ac_cv_func_mbrtowc" >&6; } - if test $ac_cv_func_mbrtowc = yes; then - -$as_echo "#define HAVE_MBRTOWC 1" >>confdefs.h - - fi - -if test $ac_cv_func_mbrtowc = yes; then - $as_echo "#define HAVE_MBSTATE_T 1" >>confdefs.h - -fi - -for ac_func in iswlower iswupper towlower towupper iswctype -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5 -$as_echo_n "checking for nl_langinfo and CODESET... " >&6; } -if ${bash_cv_langinfo_codeset+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -char* cs = nl_langinfo(CODESET); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - bash_cv_langinfo_codeset=yes -else - bash_cv_langinfo_codeset=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_langinfo_codeset" >&5 -$as_echo "$bash_cv_langinfo_codeset" >&6; } -if test $bash_cv_langinfo_codeset = yes; then - $as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wchar_t in wchar.h" >&5 -$as_echo_n "checking for wchar_t in wchar.h... " >&6; } -if ${bash_cv_type_wchar_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -int -main () -{ - - wchar_t foo; - foo = 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_type_wchar_t=yes -else - bash_cv_type_wchar_t=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wchar_t" >&5 -$as_echo "$bash_cv_type_wchar_t" >&6; } -if test $bash_cv_type_wchar_t = yes; then - -$as_echo "#define HAVE_WCHAR_T 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctype_t in wctype.h" >&5 -$as_echo_n "checking for wctype_t in wctype.h... " >&6; } -if ${bash_cv_type_wctype_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ - - wctype_t foo; - foo = 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_type_wctype_t=yes -else - bash_cv_type_wctype_t=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wctype_t" >&5 -$as_echo "$bash_cv_type_wctype_t" >&6; } -if test $bash_cv_type_wctype_t = yes; then -$as_echo "#define HAVE_WCTYPE_T 1" >>confdefs.h +fi + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wint_t in wctype.h" >&5 -$as_echo_n "checking for wint_t in wctype.h... " >&6; } -if ${bash_cv_type_wint_t+:} false; then : +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : $as_echo_n "(cached) " >&6 else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ - - wint_t foo; - foo = 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - bash_cv_type_wint_t=yes + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. else - bash_cv_type_wint_t=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wint_t" >&5 -$as_echo "$bash_cv_type_wint_t" >&6; } -if test $bash_cv_type_wint_t = yes; then +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi -$as_echo "#define HAVE_WINT_T 1" >>confdefs.h -fi + test -n "$AWK" && break +done -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wcwidth broken with unicode combining characters" >&5 -$as_echo_n "checking for wcwidth broken with unicode combining characters... " >&6; } -if ${bash_cv_wcwidth_broken+:} false; then : +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : $as_echo_n "(cached) " >&6 else - if test "$cross_compiling" = yes; then : - bash_cv_wcwidth_broken=no -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -#include - -#include -#include - -main(c, v) -int c; -char **v; -{ - int w; - - setlocale(LC_ALL, "en_US.UTF-8"); - w = wcwidth (0x0301); - exit (w == 0); /* exit 0 if wcwidth broken */ -} - + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' _ACEOF -if ac_fn_c_try_run "$LINENO"; then : - bash_cv_wcwidth_broken=yes -else - bash_cv_wcwidth_broken=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make fi - +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_wcwidth_broken" >&5 -$as_echo "$bash_cv_wcwidth_broken" >&6; } -if test "$bash_cv_wcwidth_broken" = yes; then - -$as_echo "#define WCWIDTH_BROKEN 1" >>confdefs.h +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ fi +rmdir .tst 2>/dev/null -if test "$am_cv_func_iconv" = yes; then - OLDLIBS="$LIBS" - LIBS="$LIBS $LIBINTL $LIBICONV" - for ac_func in locale_charset -do : - ac_fn_c_check_func "$LINENO" "locale_charset" "ac_cv_func_locale_charset" -if test "x$ac_cv_func_locale_charset" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_LOCALE_CHARSET 1 -_ACEOF - +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; fi -done - LIBS="$OLDLIBS" +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi fi -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of wchar_t" >&5 -$as_echo_n "checking size of wchar_t... " >&6; } -if ${ac_cv_sizeof_wchar_t+:} false; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (wchar_t))" "ac_cv_sizeof_wchar_t" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_wchar_t" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "cannot compute sizeof (wchar_t) -See \`config.log' for more details" "$LINENO" 5; } - else - ac_cv_sizeof_wchar_t=0 - fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_wchar_t" >&5 -$as_echo "$ac_cv_sizeof_wchar_t" >&6; } +# Define the identity of the package. + PACKAGE='readline' + VERSION='UNUSED-VERSION' cat >>confdefs.h <<_ACEOF -#define SIZEOF_WCHAR_T $ac_cv_sizeof_wchar_t +#define PACKAGE "$PACKAGE" _ACEOF +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF +# Some tools Automake needs. +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} -case "$host_cpu" in -*cray*) LOCAL_CFLAGS=-DCRAY ;; -*s390*) LOCAL_CFLAGS=-fsigned-char ;; -esac -case "$host_os" in -isc*) LOCAL_CFLAGS=-Disc386 ;; -esac +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} -# shared library configuration section -# -# Shared object configuration section. These values are generated by -# ${srcdir}/support/shobj-conf -# -if test -f ${srcdir}/support/shobj-conf; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking configuration for building shared libraries" >&5 -$as_echo_n "checking configuration for building shared libraries... " >&6; } - eval `TERMCAP_LIB=$TERMCAP_LIB ${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c ${host_cpu} -o ${host_os} -v ${host_vendor}` -# case "$SHLIB_LIBS" in -# *curses*|*termcap*|*termlib*) ;; -# *) SHLIB_LIBS="$SHLIB_LIBS $TERMCAP_LIB" ;; -# esac +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' +# We need awk for the "check" target (and possibly the TAP driver). The +# system "awk" is bad on some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SHLIB_STATUS" >&5 -$as_echo "$SHLIB_STATUS" >&6; } +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: - # SHLIB_STATUS is either `supported' or `unsupported'. If it's - # `unsupported', turn off any default shared library building - if test "$SHLIB_STATUS" = 'unsupported'; then - opt_shared_libs=no - fi +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. - # shared library versioning - # quoted for m4 so I can use character classes - SHLIB_MAJOR=`expr "$LIBVERSION" : '\([0-9]\)\..*'` - SHLIB_MINOR=`expr "$LIBVERSION" : '[0-9]\.\([0-9]\).*'` +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . -fi +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. -if test "$opt_static_libs" = "yes"; then - STATIC_TARGET=static - STATIC_INSTALL_TARGET=install-static -fi -if test "$opt_shared_libs" = "yes"; then - SHARED_TARGET=shared - SHARED_INSTALL_TARGET=install-shared +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi fi - - - - -if test "$opt_install_examples" = "yes"; then - EXAMPLES_INSTALL_TARGET=install-examples +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi -case "$build_os" in -msdosdjgpp*) BUILD_DIR=`pwd.exe` ;; # to prevent //d/path/file -*) BUILD_DIR=`pwd` ;; -esac - -case "$BUILD_DIR" in -*\ *) BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;; -*) ;; -esac - - - - - - - - - - - - - - + MAINT=$MAINTAINER_MODE_TRUE -ac_config_files="$ac_config_files Makefile doc/Makefile examples/Makefile shlib/Makefile readline.pc" +subdirs="$subdirs readline" -ac_config_commands="$ac_config_commands default" +ac_config_files="$ac_config_files Makefile" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -6993,7 +2443,43 @@ test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -DEFS=-DHAVE_CONFIG_H +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + ac_libobjs= ac_ltlibobjs= @@ -7012,6 +2498,19 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi : "${CONFIG_STATUS=./config.status}" ac_write_fail=0 @@ -7409,7 +2908,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by readline $as_me 8.0, which was +This file was extended by readline $as_me UNUSED-VERSION, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -7427,16 +2926,11 @@ case $ac_config_files in *" "*) set x $ac_config_files; shift; ac_config_files=$*;; esac -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 # Files that config.status was made for. config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" _ACEOF @@ -7457,25 +2951,17 @@ Usage: $0 [OPTION]... [TAG]... --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE Configuration files: $config_files -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." +Report bugs to the package provider." _ACEOF cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -readline config.status 8.0 +readline config.status UNUSED-VERSION configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -7486,6 +2972,8 @@ gives unlimited permission to copy, distribute and modify it." ac_pwd='$ac_pwd' srcdir='$srcdir' INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' test -n "\$AWK" || AWK=awk _ACEOF @@ -7530,18 +3018,7 @@ do esac as_fn_append CONFIG_FILES " '$ac_optarg'" ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) + --he | --h | --help | --hel | -h ) $as_echo "$ac_cs_usage"; exit ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) @@ -7597,13 +3074,7 @@ cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 for ac_config_target in $ac_config_targets do case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; - "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; - "shlib/Makefile") CONFIG_FILES="$CONFIG_FILES shlib/Makefile" ;; - "readline.pc") CONFIG_FILES="$CONFIG_FILES readline.pc" ;; - "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac @@ -7616,8 +3087,6 @@ done # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree @@ -7805,116 +3274,8 @@ fi cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 fi # test -n "$CONFIG_FILES" -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +eval set X " :F $CONFIG_FILES " shift for ac_tag do @@ -8052,6 +3413,11 @@ ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 @@ -8106,6 +3472,7 @@ s&@builddir@&$ac_builddir&;t t s&@abs_builddir@&$ac_abs_builddir&;t t s&@abs_top_builddir@&$ac_abs_top_builddir&;t t s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t $ac_datarootdir_hack " eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ @@ -8127,44 +3494,11 @@ which seems to be undefined. Please make sure it is defined" >&2;} esac \ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - case $ac_file$ac_mode in - "default":C) -# Makefile uses this timestamp file to record whether config.h is up to date. -echo > stamp-h - ;; esac + done # for ac_tag @@ -8196,6 +3530,151 @@ if test "$no_create" != yes; then # would make configure fail if this is the last instruction. $ac_cs_success || as_fn_exit 1 fi + +# +# CONFIG_SUBDIRS section. +# +if test "$no_recursion" != yes; then + + # Remove --cache-file, --srcdir, and --disable-option-checking arguments + # so they do not pile up. + ac_sub_configure_args= + ac_prev= + eval "set x $ac_configure_args" + shift + for ac_arg + do + if test -n "$ac_prev"; then + ac_prev= + continue + fi + case $ac_arg in + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \ + | --c=*) + ;; + --config-cache | -C) + ;; + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + ;; + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + ;; + --disable-option-checking) + ;; + *) + case $ac_arg in + *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append ac_sub_configure_args " '$ac_arg'" ;; + esac + done + + # Always prepend --prefix to ensure using the same prefix + # in subdir configurations. + ac_arg="--prefix=$prefix" + case $ac_arg in + *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args" + + # Pass --silent + if test "$silent" = yes; then + ac_sub_configure_args="--silent $ac_sub_configure_args" + fi + + # Always prepend --disable-option-checking to silence warnings, since + # different subdirs can have different --enable and --with options. + ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args" + + ac_popdir=`pwd` + for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue + + # Do not complain, so a configure script can configure whichever + # parts of a large source tree are present. + test -d "$srcdir/$ac_dir" || continue + + ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)" + $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5 + $as_echo "$ac_msg" >&6 + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + cd "$ac_dir" + + # Check for guested configure; otherwise get Cygnus style configure. + if test -f "$ac_srcdir/configure.gnu"; then + ac_sub_configure=$ac_srcdir/configure.gnu + elif test -f "$ac_srcdir/configure"; then + ac_sub_configure=$ac_srcdir/configure + elif test -f "$ac_srcdir/configure.in"; then + # This should be Cygnus configure. + ac_sub_configure=$ac_aux_dir/configure + else + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5 +$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;} + ac_sub_configure= + fi + + # The recursion is here. + if test -n "$ac_sub_configure"; then + # Make the cache file name correct relative to the subdirectory. + case $cache_file in + [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;; + *) # Relative name. + ac_sub_cache_file=$ac_top_build_prefix$cache_file ;; + esac + + { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5 +$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;} + # The eval makes quoting arguments work. + eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \ + --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" || + as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5 + fi + + cd "$ac_popdir" + done +fi if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} diff --git a/readline/configure.ac b/readline/configure.ac index e33834344a..d4ded1158f 100644 --- a/readline/configure.ac +++ b/readline/configure.ac @@ -1,320 +1,29 @@ +dnl Autoconf configure script for the readline wrapper directory +dnl Copyright (C) 2019 Free Software Foundation, Inc. dnl -dnl Configure script for readline library +dnl This file is part of GDB. dnl -dnl report bugs to chet@po.cwru.edu +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 3 of the License, or +dnl (at your option) any later version. dnl -dnl Process this file with autoconf to produce a configure script. - -# Copyright (C) 1987-2018 Free Software Foundation, Inc. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -AC_REVISION([for Readline 8.0, version 2.85]) - -m4_include([../config/override.m4]) - -AC_INIT(readline, 8.0, bug-readline@gnu.org) - -dnl make sure we are using a recent autoconf version -AC_PREREQ(2.50) - -AC_CONFIG_SRCDIR(readline.h) -dnl GDB LOCAL -dnl AC_CONFIG_AUX_DIR(./support) -AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/..) -AC_CONFIG_HEADERS(config.h) - -dnl update the value of RL_READLINE_VERSION in readline.h when this changes -LIBVERSION=8.0 - -AC_CANONICAL_HOST -AC_CANONICAL_BUILD - -dnl configure defaults -opt_curses=no - -dnl arguments to configure -AC_ARG_WITH(curses, AC_HELP_STRING([--with-curses], [use the curses library instead of the termcap library]), opt_curses=$withval) - -if test "$opt_curses" = "yes"; then - prefer_curses=yes -fi - -dnl option parsing for optional features -opt_multibyte=yes -opt_static_libs=yes -opt_shared_libs=no -opt_install_examples=no - -AC_ARG_ENABLE(multibyte, AC_HELP_STRING([--enable-multibyte], [enable multibyte characters if OS supports them]), opt_multibyte=$enableval) -dnl AC_ARG_ENABLE(shared, AC_HELP_STRING([--enable-shared], [build shared libraries [[default=YES]]]), opt_shared_libs=$enableval) -AC_ARG_ENABLE(static, AC_HELP_STRING([--enable-static], [build static libraries [[default=YES]]]), opt_static_libs=$enableval) -AC_ARG_ENABLE(install-examples, AC_HELP_STRING([--disable-install-examples], [don't install examples [[default=install]]]), opt_install_examples=$enableval) - -if test $opt_multibyte = no; then -AC_DEFINE(NO_MULTIBYTE_SUPPORT) -fi - -dnl load up the cross-building cache file -- add more cases and cache -dnl files as necessary - -dnl Note that host and target machine are the same, and different than the -dnl build machine. - -CROSS_COMPILE= -if test "x$cross_compiling" = "xyes"; then - case "${host}" in - *-cygwin*) - cross_cache=${srcdir}/cross-build/cygwin.cache - ;; - *-mingw*) - cross_cache=${srcdir}/cross-build/mingw.cache - ;; - i[[3456]]86-*-beos*) - cross_cache=${srcdir}/cross-build/x86-beos.cache - ;; - *) echo "configure: cross-compiling for $host is not supported" >&2 - ;; - esac - if test -n "${cross_cache}" && test -r "${cross_cache}"; then - echo "loading cross-build cache file ${cross_cache}" - . ${cross_cache} - fi - unset cross_cache - CROSS_COMPILE='-DCROSS_COMPILING' - AC_SUBST(CROSS_COMPILE) -fi - -echo "" -echo "Beginning configuration for readline-$LIBVERSION for ${host_cpu}-${host_vendor}-${host_os}" -echo "" - -# We want these before the checks, so the checks can modify their values. -test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 - -AC_PROG_MAKE_SET -AC_PROG_CC -dnl AC_AIX -AC_MINIX - -# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. -test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" - -AC_PROG_GCC_TRADITIONAL -AC_PROG_INSTALL -AC_CHECK_TOOL(AR, ar) -dnl Set default for ARFLAGS, since autoconf does not have a macro for it. -dnl This allows people to set it when running configure or make -test -n "$ARFLAGS" || ARFLAGS="cr" -AC_PROG_RANLIB - -MAKE_SHELL=/bin/sh -AC_SUBST(MAKE_SHELL) - -AC_C_CONST -AC_C_PROTOTYPES -AC_C_CHAR_UNSIGNED -AC_C_VOLATILE - -AC_TYPE_SIGNAL - -AC_TYPE_SIZE_T -AC_CHECK_TYPE(ssize_t, int) - -AC_HEADER_STDC - -AC_HEADER_STAT -AC_HEADER_DIRENT - -AC_CHECK_FUNCS(fcntl kill lstat readlink) -AC_CHECK_FUNCS(fnmatch memmove pselect putenv select setenv setlocale \ - strcasecmp strpbrk tcgetattr vsnprintf) -AC_CHECK_FUNCS(isascii isxdigit) -AC_CHECK_FUNCS(getpwent getpwnam getpwuid) - -AC_FUNC_CHOWN -AC_FUNC_STRCOLL - -AC_CHECK_HEADERS(fcntl.h unistd.h stdlib.h varargs.h stdarg.h stdbool.h \ - string.h strings.h \ - limits.h locale.h pwd.h memory.h termcap.h termios.h termio.h) -AC_CHECK_HEADERS(sys/ioctl.h sys/pte.h sys/stream.h sys/select.h sys/file.h) - -AC_CHECK_HEADERS(sys/ptem.h,,, -[[ -#if HAVE_SYS_STREAM_H -# include -#endif -]]) - -AC_SYS_LARGEFILE - -BASH_SYS_SIGNAL_VINTAGE -BASH_SYS_REINSTALL_SIGHANDLERS - -BASH_FUNC_POSIX_SETJMP -BASH_FUNC_LSTAT -BASH_FUNC_STRCOLL -BASH_FUNC_CTYPE_NONASCII - -BASH_CHECK_GETPW_FUNCS - -AC_HEADER_TIOCGWINSZ - -BASH_TYPE_SIG_ATOMIC_T -BASH_TYPE_SIGHANDLER - -BASH_HAVE_TIOCSTAT -BASH_HAVE_FIONREAD -BASH_CHECK_SPEED_T -BASH_STRUCT_WINSIZE -BASH_STRUCT_DIRENT_D_INO -BASH_STRUCT_DIRENT_D_FILENO - -AC_CHECK_HEADERS(libaudit.h) -AC_CHECK_DECLS([AUDIT_USER_TTY],,, [[#include ]]) - -dnl yuck -case "$host_os" in -aix*) prefer_curses=yes ;; -esac -BASH_CHECK_LIB_TERMCAP -if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then - if test "$prefer_curses" = yes; then - TERMCAP_LIB=-lcurses - else - TERMCAP_LIB=-ltermcap #default - fi -fi -# Windows ncurses installation -if test "$TERMCAP_LIB" = "-lncurses"; then - AC_CHECK_HEADERS(ncurses/termcap.h) -fi - -case "$TERMCAP_LIB" in --ltinfo) TERMCAP_PKG_CONFIG_LIB=tinfo ;; --lcurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; --lncurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; --ltermcap) TERMCAP_PKG_CONFIG_LIB=termcap ;; -*) TERMCAP_PKG_CONFIG_LIB=termcap ;; -esac - -BASH_CHECK_MULTIBYTE - -case "$host_cpu" in -*cray*) LOCAL_CFLAGS=-DCRAY ;; -*s390*) LOCAL_CFLAGS=-fsigned-char ;; -esac - -case "$host_os" in -isc*) LOCAL_CFLAGS=-Disc386 ;; -esac - -# shared library configuration section -# -# Shared object configuration section. These values are generated by -# ${srcdir}/support/shobj-conf -# -if test -f ${srcdir}/support/shobj-conf; then - AC_MSG_CHECKING(configuration for building shared libraries) - eval `TERMCAP_LIB=$TERMCAP_LIB ${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c ${host_cpu} -o ${host_os} -v ${host_vendor}` - -# case "$SHLIB_LIBS" in -# *curses*|*termcap*|*termlib*) ;; -# *) SHLIB_LIBS="$SHLIB_LIBS $TERMCAP_LIB" ;; -# esac - - AC_SUBST(SHOBJ_CC) - AC_SUBST(SHOBJ_CFLAGS) - AC_SUBST(SHOBJ_LD) - AC_SUBST(SHOBJ_LDFLAGS) - AC_SUBST(SHOBJ_XLDFLAGS) - AC_SUBST(SHOBJ_LIBS) - AC_SUBST(SHOBJ_STATUS) - AC_SUBST(SHLIB_STATUS) - AC_SUBST(SHLIB_XLDFLAGS) - AC_SUBST(SHLIB_DOT) - AC_SUBST(SHLIB_LIBPREF) - AC_SUBST(SHLIB_LIBSUFF) - AC_SUBST(SHLIB_LIBVERSION) - AC_SUBST(SHLIB_DLLVERSION) - AC_SUBST(SHLIB_LIBS) - AC_MSG_RESULT($SHLIB_STATUS) - - # SHLIB_STATUS is either `supported' or `unsupported'. If it's - # `unsupported', turn off any default shared library building - if test "$SHLIB_STATUS" = 'unsupported'; then - opt_shared_libs=no - fi - - # shared library versioning - # quoted for m4 so I can use character classes - SHLIB_MAJOR=[`expr "$LIBVERSION" : '\([0-9]\)\..*'`] - SHLIB_MINOR=[`expr "$LIBVERSION" : '[0-9]\.\([0-9]\).*'`] - AC_SUBST(SHLIB_MAJOR) - AC_SUBST(SHLIB_MINOR) -fi - -if test "$opt_static_libs" = "yes"; then - STATIC_TARGET=static - STATIC_INSTALL_TARGET=install-static -fi -if test "$opt_shared_libs" = "yes"; then - SHARED_TARGET=shared - SHARED_INSTALL_TARGET=install-shared -fi - -AC_SUBST(STATIC_TARGET) -AC_SUBST(SHARED_TARGET) -AC_SUBST(STATIC_INSTALL_TARGET) -AC_SUBST(SHARED_INSTALL_TARGET) - -if test "$opt_install_examples" = "yes"; then - EXAMPLES_INSTALL_TARGET=install-examples -fi -AC_SUBST(EXAMPLES_INSTALL_TARGET) - -case "$build_os" in -msdosdjgpp*) BUILD_DIR=`pwd.exe` ;; # to prevent //d/path/file -*) BUILD_DIR=`pwd` ;; -esac - -case "$BUILD_DIR" in -*\ *) BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;; -*) ;; -esac - -AC_SUBST(BUILD_DIR) - -AC_SUBST(CFLAGS) -AC_SUBST(LOCAL_CFLAGS) -AC_SUBST(LOCAL_LDFLAGS) -AC_SUBST(LOCAL_DEFS) - -AC_SUBST(AR) -AC_SUBST(ARFLAGS) - -AC_SUBST(host_cpu) -AC_SUBST(host_os) +dnl This program is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +dnl GNU General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program. If not, see . -AC_SUBST(LIBVERSION) +dnl Process this file with autoconf to produce a configure script. -AC_SUBST(TERMCAP_LIB) -AC_SUBST(TERMCAP_PKG_CONFIG_LIB) +AC_INIT([readline], [UNUSED-VERSION]) +AC_CONFIG_SRCDIR([readline/readline.c]) +AC_CONFIG_AUX_DIR(..) +AM_INIT_AUTOMAKE +AM_MAINTAINER_MODE -AC_OUTPUT([Makefile doc/Makefile examples/Makefile shlib/Makefile readline.pc], -[ -# Makefile uses this timestamp file to record whether config.h is up to date. -echo > stamp-h -]) +AC_CONFIG_SUBDIRS([readline]) +AC_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/readline/cross-build/cygwin.cache b/readline/cross-build/cygwin.cache deleted file mode 100644 index b0bb49a837..0000000000 --- a/readline/cross-build/cygwin.cache +++ /dev/null @@ -1,46 +0,0 @@ -# This file is a shell script that caches the results of configure -# tests for CYGWIN32 so they don't need to be done when cross-compiling. - -# AC_FUNC_GETPGRP should also define GETPGRP_VOID -ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'} -# AC_FUNC_SETVBUF_REVERSED should not define anything else -ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'} -# on CYGWIN32, system calls do not restart -ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'} -bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'} - -# these may be necessary, but they are currently commented out -#ac_cv_c_bigendian=${ac_cv_c_bigendian='no'} -ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'} -ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} -ac_cv_sizeof_long=${ac_cv_sizeof_long='4'} - -bash_cv_dup2_broken=${bash_cv_dup2_broken='no'} -bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'} -bash_cv_type_rlimit=${bash_cv_type_rlimit='long'} -bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'} -bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'} -bash_cv_sys_siglist=${bash_cv_sys_siglist='no'} -bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'} -bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'} -bash_cv_printf_declared=${bash_cv_printf_declared='yes'} -bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'} -bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'} -bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'} -bash_cv_job_control_missing=${bash_cv_job_control_missing='present'} -bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='missing'} -bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='present'} -bash_cv_mail_dir=${bash_cv_mail_dir='unknown'} -bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'} -bash_cv_have_mbstate_t=${bash_cv_have_mbstate_t='yes'} - -bash_cv_type_int32_t=${bash_cv_type_int32_t='int'} -bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'} -ac_cv_header_termcap_h=${ac_cv_header_termcap_h='yes'} -ac_cv_header_termios_h=${ac_cv_header_termios_h='yes'} -bash_cv_termcap_lib=${bash_cv_termcap_lib='-ltermcap'} - -bash_cv_tiocgwinsz_in_ioctl=${bash_cv_tiocgwinsz_in_ioctl='yes'} -ac_cv_lib_termcap_tgetent=${ac_cv_lib_termcap_tgetent='yes'} - -# end of cross-build/cygwin32.cache diff --git a/readline/display.c b/readline/display.c deleted file mode 100644 index 89193b572b..0000000000 --- a/readline/display.c +++ /dev/null @@ -1,3249 +0,0 @@ -/* display.c -- readline redisplay facility. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#include "posixstat.h" - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -#ifdef __MSDOS__ -# include -#endif - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -/* Termcap library stuff. */ -#include "tcap.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -#if !defined (strchr) && !defined (__STDC__) -extern char *strchr (), *strrchr (); -#endif /* !strchr && !__STDC__ */ - -static void update_line PARAMS((char *, char *, int, int, int, int)); -static void space_to_eol PARAMS((int)); -static void delete_chars PARAMS((int)); -static void insert_some_chars PARAMS((char *, int, int)); -static void open_some_spaces PARAMS((int)); -static void cr PARAMS((void)); -static void redraw_prompt PARAMS((char *)); - -/* Values for FLAGS */ -#define PMT_MULTILINE 0x01 - -static char *expand_prompt PARAMS((char *, int, int *, int *, int *, int *)); - -/* State of visible and invisible lines. */ -struct line_state - { - char *line; - int *lbreaks; - int lbsize; -#if defined (HANDLE_MULTIBYTE) - int wbsize; - int *wrapped_line; -#endif - }; - -/* The line display buffers. One is the line currently displayed on - the screen. The other is the line about to be displayed. */ -static struct line_state line_state_array[2]; -static struct line_state *line_state_visible = &line_state_array[0]; -static struct line_state *line_state_invisible = &line_state_array[1]; -static int line_structures_initialized = 0; - -/* Backwards-compatible names. */ -#define inv_lbreaks (line_state_invisible->lbreaks) -#define inv_lbsize (line_state_invisible->lbsize) -#define vis_lbreaks (line_state_visible->lbreaks) -#define vis_lbsize (line_state_visible->lbsize) - -#define visible_line (line_state_visible->line) -#define invisible_line (line_state_invisible->line) - -#if defined (HANDLE_MULTIBYTE) -static int _rl_col_width PARAMS((const char *, int, int, int)); -#else -# define _rl_col_width(l, s, e, f) (((e) <= (s)) ? 0 : (e) - (s)) -#endif - -/* Heuristic used to decide whether it is faster to move from CUR to NEW - by backing up or outputting a carriage return and moving forward. CUR - and NEW are either both buffer positions or absolute screen positions. */ -#define CR_FASTER(new, cur) (((new) + 1) < ((cur) - (new))) - -/* _rl_last_c_pos is an absolute cursor position in multibyte locales and a - buffer index in others. This macro is used when deciding whether the - current cursor position is in the middle of a prompt string containing - invisible characters. XXX - might need to take `modmark' into account. */ -/* XXX - only valid when tested against _rl_last_c_pos; buffer indices need - to use prompt_last_invisible directly. */ -#define PROMPT_ENDING_INDEX \ - ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) ? prompt_physical_chars : prompt_last_invisible+1) - -/* **************************************************************** */ -/* */ -/* Display stuff */ -/* */ -/* **************************************************************** */ - -/* This is the stuff that is hard for me. I never seem to write good - display routines in C. Let's see how I do this time. */ - -/* (PWP) Well... Good for a simple line updater, but totally ignores - the problems of input lines longer than the screen width. - - update_line and the code that calls it makes a multiple line, - automatically wrapping line update. Careful attention needs - to be paid to the vertical position variables. */ - -/* Keep two buffers; one which reflects the current contents of the - screen, and the other to draw what we think the new contents should - be. Then compare the buffers, and make whatever changes to the - screen itself that we should. Finally, make the buffer that we - just drew into be the one which reflects the current contents of the - screen, and place the cursor where it belongs. - - Commands that want to can fix the display themselves, and then let - this function know that the display has been fixed by setting the - RL_DISPLAY_FIXED variable. This is good for efficiency. */ - -/* Application-specific redisplay function. */ -rl_voidfunc_t *rl_redisplay_function = rl_redisplay; - -/* Global variables declared here. */ -/* What YOU turn on when you have handled all redisplay yourself. */ -int rl_display_fixed = 0; - -/* The stuff that gets printed out before the actual text of the line. - This is usually pointing to rl_prompt. */ -char *rl_display_prompt = (char *)NULL; - -/* Variables used to include the editing mode in the prompt. */ -char *_rl_emacs_mode_str; -int _rl_emacs_modestr_len; - -char *_rl_vi_ins_mode_str; -int _rl_vi_ins_modestr_len; - -char *_rl_vi_cmd_mode_str; -int _rl_vi_cmd_modestr_len; - -/* Pseudo-global variables declared here. */ - -/* Hints for other parts of readline to give to the display engine. */ -int _rl_suppress_redisplay = 0; -int _rl_want_redisplay = 0; - -/* The visible cursor position. If you print some text, adjust this. */ -/* NOTE: _rl_last_c_pos is used as a buffer index when not in a locale - supporting multibyte characters, and an absolute cursor position when - in such a locale. This is an artifact of the donated multibyte support. - Care must be taken when modifying its value. */ -int _rl_last_c_pos = 0; -int _rl_last_v_pos = 0; - -/* Number of physical lines consumed by the current line buffer currently - on screen minus 1. */ -int _rl_vis_botlin = 0; - -/* This is a hint update_line gives to rl_redisplay that it has adjusted the - value of _rl_last_c_pos *and* taken the presence of any invisible chars in - the prompt into account. rl_redisplay notes this and does not do the - adjustment itself. */ -static int cpos_adjusted; - -/* The index into the line buffer corresponding to the cursor position */ -static int cpos_buffer_position; - -/* A flag to note when we're displaying the first line of the prompt */ -static int displaying_prompt_first_line; -/* The number of multibyte characters in the prompt, if any */ -static int prompt_multibyte_chars; - -static int _rl_inv_botlin = 0; - -/* Variables used only in this file. */ -/* The last left edge of text that was displayed. This is used when - doing horizontal scrolling. It shifts in thirds of a screenwidth. */ -static int last_lmargin; - -/* A buffer for `modeline' messages. */ -static char *msg_buf = 0; -static int msg_bufsiz = 0; - -/* Non-zero forces the redisplay even if we thought it was unnecessary. */ -static int forced_display; - -/* Default and initial buffer size. Can grow. */ -static int line_size = 1024; - -/* Variables to keep track of the expanded prompt string, which may - include invisible characters. */ - -static char *local_prompt, *local_prompt_prefix; -static int local_prompt_len; -static int prompt_prefix_length; -/* Number of chars in the buffer that contribute to visible chars on the screen. - This might be different from the number of physical chars in the presence - of multibyte characters */ -static int prompt_visible_length; - -/* The number of invisible characters in the line currently being - displayed on the screen. */ -static int visible_wrap_offset; - -/* The number of invisible characters in the prompt string. Static so it - can be shared between rl_redisplay and update_line */ -static int wrap_offset; - -/* The index of the last invisible character in the prompt string. */ -static int prompt_last_invisible; - -/* The length (buffer offset) of the first line of the last (possibly - multi-line) buffer displayed on the screen. */ -static int visible_first_line_len; - -/* Number of invisible characters on the first physical line of the prompt. - Only valid when the number of physical characters in the prompt exceeds - (or is equal to) _rl_screenwidth. */ -static int prompt_invis_chars_first_line; - -static int prompt_last_screen_line; - -static int prompt_physical_chars; - -/* An array of indexes into the prompt string where we will break physical - screen lines. It's easier to compute in expand_prompt and use later in - rl_redisplay instead of having rl_redisplay try to guess about invisible - characters in the prompt or use heuristics about where they are. */ -static int *local_prompt_newlines; - -/* set to a non-zero value by rl_redisplay if we are marking modified history - lines and the current line is so marked. */ -static int modmark; - -static int line_totbytes; - -/* Variables to save and restore prompt and display information. */ - -/* These are getting numerous enough that it's time to create a struct. */ - -static char *saved_local_prompt; -static char *saved_local_prefix; -static int *saved_local_prompt_newlines; - -static int saved_last_invisible; -static int saved_visible_length; -static int saved_prefix_length; -static int saved_local_length; -static int saved_invis_chars_first_line; -static int saved_physical_chars; - -/* Return a string indicating the editing mode, for use in the prompt. */ - -static char * -prompt_modestr (int *lenp) -{ - if (rl_editing_mode == emacs_mode) - { - if (lenp) - *lenp = _rl_emacs_mode_str ? _rl_emacs_modestr_len : RL_EMACS_MODESTR_DEFLEN; - return _rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT; - } - else if (_rl_keymap == vi_insertion_keymap) - { - if (lenp) - *lenp = _rl_vi_ins_mode_str ? _rl_vi_ins_modestr_len : RL_VI_INS_MODESTR_DEFLEN; - return _rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT; /* vi insert mode */ - } - else - { - if (lenp) - *lenp = _rl_vi_cmd_mode_str ? _rl_vi_cmd_modestr_len : RL_VI_CMD_MODESTR_DEFLEN; - return _rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT; /* vi command mode */ - } -} - -/* Expand the prompt string S and return the number of visible - characters in *LP, if LP is not null. This is currently more-or-less - a placeholder for expansion. LIP, if non-null is a place to store the - index of the last invisible character in the returned string. NIFLP, - if non-zero, is a place to store the number of invisible characters in - the first prompt line. The previous are used as byte counts -- indexes - into a character buffer. *VLP gets the number of physical characters in - the expanded prompt (visible length) */ - -/* Current implementation: - \001 (^A) start non-visible characters - \002 (^B) end non-visible characters - all characters except \001 and \002 (following a \001) are copied to - the returned string; all characters except those between \001 and - \002 are assumed to be `visible'. */ - -/* Possible values for FLAGS: - PMT_MULTILINE caller indicates that this is part of a multiline prompt -*/ - -/* This approximates the number of lines the prompt will take when displayed */ -#define APPROX_DIV(n, d) (((n) < (d)) ? 1 : ((n) / (d)) + 1) - -static char * -expand_prompt (char *pmt, int flags, int *lp, int *lip, int *niflp, int *vlp) -{ - char *r, *ret, *p, *igstart, *nprompt, *ms; - int l, rl, last, ignoring, ninvis, invfl, invflset, ind, pind, physchars; - int mlen, newlines, newlines_guess, bound; - int mb_cur_max; - - /* We only expand the mode string for the last line of a multiline prompt - (a prompt with embedded newlines). */ - ms = (((pmt == rl_prompt) ^ (flags & PMT_MULTILINE)) && _rl_show_mode_in_prompt) ? prompt_modestr (&mlen) : 0; - if (ms) - { - l = strlen (pmt); - nprompt = (char *)xmalloc (l + mlen + 1); - memcpy (nprompt, ms, mlen); - strcpy (nprompt + mlen, pmt); - } - else - nprompt = pmt; - - mb_cur_max = MB_CUR_MAX; - - if (_rl_screenwidth == 0) - _rl_get_screen_size (0, 0); /* avoid division by zero */ - - /* Short-circuit if we can. We can do this if we are treating the prompt as - a sequence of bytes and there are no invisible characters in the prompt - to deal with. Since we populate local_prompt_newlines, we have to run - through the rest of the function if this prompt looks like it's going to - be longer than one screen line. */ - if ((mb_cur_max <= 1 || rl_byte_oriented) && strchr (nprompt, RL_PROMPT_START_IGNORE) == 0) - { - l = strlen (nprompt); - if (l < (_rl_screenwidth > 0 ? _rl_screenwidth : 80)) - { - r = (nprompt == pmt) ? savestring (pmt) : nprompt; - if (lp) - *lp = l; - if (lip) - *lip = 0; - if (niflp) - *niflp = 0; - if (vlp) - *vlp = l; - - local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * 2); - local_prompt_newlines[0] = 0; - local_prompt_newlines[1] = -1; - - return r; - } - } - - l = strlen (nprompt); /* XXX */ - r = ret = (char *)xmalloc (l + 1); - - /* Guess at how many screen lines the prompt will take to size the array that - keeps track of where the line wraps happen */ - newlines_guess = (_rl_screenwidth > 0) ? APPROX_DIV(l, _rl_screenwidth) : APPROX_DIV(l, 80); - local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * (newlines_guess + 1)); - local_prompt_newlines[newlines = 0] = 0; - for (rl = 1; rl <= newlines_guess; rl++) - local_prompt_newlines[rl] = -1; - - rl = physchars = 0; /* mode string now part of nprompt */ - invfl = 0; /* invisible chars in first line of prompt */ - invflset = 0; /* we only want to set invfl once */ - igstart = 0; /* we're not ignoring any characters yet */ - - for (ignoring = last = ninvis = 0, p = nprompt; p && *p; p++) - { - /* This code strips the invisible character string markers - RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE */ - if (ignoring == 0 && *p == RL_PROMPT_START_IGNORE) /* XXX - check ignoring? */ - { - ignoring = 1; - igstart = p; - continue; - } - else if (ignoring && *p == RL_PROMPT_END_IGNORE) - { - ignoring = 0; - if (p != (igstart + 1)) - last = r - ret - 1; - continue; - } - else - { -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - pind = p - nprompt; - ind = _rl_find_next_mbchar (nprompt, pind, 1, MB_FIND_NONZERO); - l = ind - pind; - while (l--) - *r++ = *p++; - if (!ignoring) - { - /* rl ends up being assigned to prompt_visible_length, - which is the number of characters in the buffer that - contribute to characters on the screen, which might - not be the same as the number of physical characters - on the screen in the presence of multibyte characters */ - rl += ind - pind; - physchars += _rl_col_width (nprompt, pind, ind, 0); - } - else - ninvis += ind - pind; - p--; /* compensate for later increment */ - } - else -#endif - { - *r++ = *p; - if (!ignoring) - { - rl++; /* visible length byte counter */ - physchars++; - } - else - ninvis++; /* invisible chars byte counter */ - } - - if (invflset == 0 && physchars >= _rl_screenwidth) - { - invfl = ninvis; - invflset = 1; - } - - if (physchars >= (bound = (newlines + 1) * _rl_screenwidth) && local_prompt_newlines[newlines+1] == -1) - { - int new; - if (physchars > bound) /* should rarely happen */ - { -#if defined (HANDLE_MULTIBYTE) - *r = '\0'; /* need null-termination for strlen */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - new = _rl_find_prev_mbchar (ret, r - ret, MB_FIND_ANY); - else -#endif - new = r - ret - (physchars - bound); /* XXX */ - } - else - new = r - ret; - local_prompt_newlines[++newlines] = new; - } - } - } - - if (rl < _rl_screenwidth) - invfl = ninvis; - - *r = '\0'; - if (lp) - *lp = rl; - if (lip) - *lip = last; - if (niflp) - *niflp = invfl; - if (vlp) - *vlp = physchars; - - if (nprompt != pmt) - free (nprompt); - - return ret; -} - -/* Just strip out RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE from - PMT and return the rest of PMT. */ -char * -_rl_strip_prompt (char *pmt) -{ - char *ret; - - ret = expand_prompt (pmt, 0, (int *)NULL, (int *)NULL, (int *)NULL, (int *)NULL); - return ret; -} - -void -_rl_reset_prompt (void) -{ - rl_visible_prompt_length = rl_expand_prompt (rl_prompt); -} - -/* - * Expand the prompt string into the various display components, if - * necessary. - * - * local_prompt = expanded last line of string in rl_display_prompt - * (portion after the final newline) - * local_prompt_prefix = portion before last newline of rl_display_prompt, - * expanded via expand_prompt - * prompt_visible_length = number of visible characters in local_prompt - * prompt_prefix_length = number of visible characters in local_prompt_prefix - * - * It also tries to keep track of the number of invisible characters in the - * prompt string, and where they are. - * - * This function is called once per call to readline(). It may also be - * called arbitrarily to expand the primary prompt. - * - * The return value is the number of visible characters on the last line - * of the (possibly multi-line) prompt. In this case, multi-line means - * there are embedded newlines in the prompt string itself, not that the - * number of physical characters exceeds the screen width and the prompt - * wraps. - */ -int -rl_expand_prompt (char *prompt) -{ - char *p, *t; - int c; - - /* Clear out any saved values. */ - FREE (local_prompt); - FREE (local_prompt_prefix); - - local_prompt = local_prompt_prefix = (char *)0; - local_prompt_len = 0; - prompt_last_invisible = prompt_invis_chars_first_line = 0; - prompt_visible_length = prompt_physical_chars = 0; - - if (prompt == 0 || *prompt == 0) - return (0); - - p = strrchr (prompt, '\n'); - if (p == 0) - { - /* The prompt is only one logical line, though it might wrap. */ - local_prompt = expand_prompt (prompt, 0, &prompt_visible_length, - &prompt_last_invisible, - &prompt_invis_chars_first_line, - &prompt_physical_chars); - local_prompt_prefix = (char *)0; - local_prompt_len = local_prompt ? strlen (local_prompt) : 0; - return (prompt_visible_length); - } - else - { - /* The prompt spans multiple lines. */ - t = ++p; - local_prompt = expand_prompt (p, PMT_MULTILINE, - &prompt_visible_length, - &prompt_last_invisible, - &prompt_invis_chars_first_line, - &prompt_physical_chars); - c = *t; *t = '\0'; - /* The portion of the prompt string up to and including the - final newline is now null-terminated. */ - local_prompt_prefix = expand_prompt (prompt, PMT_MULTILINE, - &prompt_prefix_length, - (int *)NULL, - (int *)NULL, - (int *)NULL); - *t = c; - local_prompt_len = local_prompt ? strlen (local_prompt) : 0; - return (prompt_prefix_length); - } -} - -/* Initialize the VISIBLE_LINE and INVISIBLE_LINE arrays, and their associated - arrays of line break markers. MINSIZE is the minimum size of VISIBLE_LINE - and INVISIBLE_LINE; if it is greater than LINE_SIZE, LINE_SIZE is - increased. If the lines have already been allocated, this ensures that - they can hold at least MINSIZE characters. */ -static void -init_line_structures (int minsize) -{ - register int n; - int original_minsize = minsize; - - if (minsize <= _rl_screenwidth) /* XXX - for gdb */ - minsize = _rl_screenwidth + 1; - - if (invisible_line == 0) /* initialize it */ - { - if (line_size < minsize) - line_size = minsize; - visible_line = (char *)xmalloc (line_size); - invisible_line = (char *)xmalloc (line_size); - } - else if (line_size < minsize) /* ensure it can hold MINSIZE chars */ - { - line_size *= 2; - if (line_size < minsize) - line_size = minsize; - visible_line = (char *)xrealloc (visible_line, line_size); - invisible_line = (char *)xrealloc (invisible_line, line_size); - } - - for (n = original_minsize; n < line_size; n++) - { - visible_line[n] = 0; - invisible_line[n] = 1; - } - - if (vis_lbreaks == 0) - { - /* should be enough. */ - inv_lbsize = vis_lbsize = 256; - -#if defined (HANDLE_MULTIBYTE) - line_state_visible->wbsize = vis_lbsize; - line_state_visible->wrapped_line = (int *)xmalloc (line_state_visible->wbsize * sizeof (int)); - - line_state_invisible->wbsize = inv_lbsize; - line_state_invisible->wrapped_line = (int *)xmalloc (line_state_invisible->wbsize * sizeof (int)); -#endif - - inv_lbreaks = (int *)xmalloc (inv_lbsize * sizeof (int)); - vis_lbreaks = (int *)xmalloc (vis_lbsize * sizeof (int)); - inv_lbreaks[0] = vis_lbreaks[0] = 0; - } - - line_structures_initialized = 1; -} - -/* Basic redisplay algorithm. See comments inline. */ -void -rl_redisplay (void) -{ - register int in, out, c, linenum, cursor_linenum; - register char *line; - int inv_botlin, lb_botlin, lb_linenum, o_cpos; - int newlines, lpos, temp, n0, num, prompt_lines_estimate; - char *prompt_this_line; - int mb_cur_max = MB_CUR_MAX; -#if defined (HANDLE_MULTIBYTE) - wchar_t wc; - size_t wc_bytes; - int wc_width; - mbstate_t ps; - int _rl_wrapped_multicolumn = 0; -#endif - - if (_rl_echoing_p == 0) - return; - - /* Block keyboard interrupts because this function manipulates global - data structures. */ - _rl_block_sigint (); - RL_SETSTATE (RL_STATE_REDISPLAYING); - - if (!rl_display_prompt) - rl_display_prompt = ""; - - if (line_structures_initialized == 0) - { - init_line_structures (0); - rl_on_new_line (); - } - else if (line_size <= _rl_screenwidth) - init_line_structures (_rl_screenwidth + 1); - - /* Draw the line into the buffer. */ - cpos_buffer_position = -1; - - prompt_multibyte_chars = prompt_visible_length - prompt_physical_chars; - - line = invisible_line; - out = inv_botlin = 0; - - /* Mark the line as modified or not. We only do this for history - lines. */ - modmark = 0; - if (_rl_mark_modified_lines && current_history () && rl_undo_list) - { - line[out++] = '*'; - line[out] = '\0'; - modmark = 1; - } - - /* If someone thought that the redisplay was handled, but the currently - visible line has a different modification state than the one about - to become visible, then correct the caller's misconception. */ - if (visible_line[0] != invisible_line[0]) - rl_display_fixed = 0; - - /* If the prompt to be displayed is the `primary' readline prompt (the - one passed to readline()), use the values we have already expanded. - If not, use what's already in rl_display_prompt. WRAP_OFFSET is the - number of non-visible characters in the prompt string. */ - /* This is where we output the characters in the prompt before the last - newline, if any. If there aren't any embedded newlines, we don't - write anything. Copy the last line of the prompt string into the line in - any case */ - if (rl_display_prompt == rl_prompt || local_prompt) - { - if (local_prompt_prefix && forced_display) - _rl_output_some_chars (local_prompt_prefix, strlen (local_prompt_prefix)); - - if (local_prompt_len > 0) - { - temp = local_prompt_len + out + 2; - if (temp >= line_size) - { - line_size = (temp + 1024) - (temp % 1024); - visible_line = (char *)xrealloc (visible_line, line_size); - line = invisible_line = (char *)xrealloc (invisible_line, line_size); - } - strncpy (line + out, local_prompt, local_prompt_len); - out += local_prompt_len; - } - line[out] = '\0'; - wrap_offset = local_prompt_len - prompt_visible_length; - } - else - { - int pmtlen; - prompt_this_line = strrchr (rl_display_prompt, '\n'); - if (!prompt_this_line) - prompt_this_line = rl_display_prompt; - else - { - prompt_this_line++; - pmtlen = prompt_this_line - rl_display_prompt; /* temp var */ - if (forced_display) - { - _rl_output_some_chars (rl_display_prompt, pmtlen); - /* Make sure we are at column zero even after a newline, - regardless of the state of terminal output processing. */ - if (pmtlen < 2 || prompt_this_line[-2] != '\r') - cr (); - } - } - - prompt_physical_chars = pmtlen = strlen (prompt_this_line); - temp = pmtlen + out + 2; - if (temp >= line_size) - { - line_size = (temp + 1024) - (temp % 1024); - visible_line = (char *)xrealloc (visible_line, line_size); - line = invisible_line = (char *)xrealloc (invisible_line, line_size); - } - strncpy (line + out, prompt_this_line, pmtlen); - out += pmtlen; - line[out] = '\0'; - wrap_offset = prompt_invis_chars_first_line = 0; - } - -#if defined (HANDLE_MULTIBYTE) -#define CHECK_INV_LBREAKS() \ - do { \ - if (newlines >= (inv_lbsize - 2)) \ - { \ - inv_lbsize *= 2; \ - inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ - } \ - if (newlines >= (line_state_invisible->wbsize - 2)) \ - { \ - line_state_invisible->wbsize *= 2; \ - line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \ - } \ - } while (0) -#else -#define CHECK_INV_LBREAKS() \ - do { \ - if (newlines >= (inv_lbsize - 2)) \ - { \ - inv_lbsize *= 2; \ - inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ - } \ - } while (0) -#endif /* !HANDLE_MULTIBYTE */ - -#if defined (HANDLE_MULTIBYTE) -#define CHECK_LPOS() \ - do { \ - lpos++; \ - if (lpos >= _rl_screenwidth) \ - { \ - if (newlines >= (inv_lbsize - 2)) \ - { \ - inv_lbsize *= 2; \ - inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ - } \ - inv_lbreaks[++newlines] = out; \ - if (newlines >= (line_state_invisible->wbsize - 2)) \ - { \ - line_state_invisible->wbsize *= 2; \ - line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \ - } \ - line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; \ - lpos = 0; \ - } \ - } while (0) -#else -#define CHECK_LPOS() \ - do { \ - lpos++; \ - if (lpos >= _rl_screenwidth) \ - { \ - if (newlines >= (inv_lbsize - 2)) \ - { \ - inv_lbsize *= 2; \ - inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ - } \ - inv_lbreaks[++newlines] = out; \ - lpos = 0; \ - } \ - } while (0) -#endif - - /* inv_lbreaks[i] is where line i starts in the buffer. */ - inv_lbreaks[newlines = 0] = 0; - /* lpos is a physical cursor position, so it needs to be adjusted by the - number of invisible characters in the prompt, per line. We compute - the line breaks in the prompt string in expand_prompt, taking invisible - characters into account, and if lpos exceeds the screen width, we copy - the data in the loop below. */ - lpos = prompt_physical_chars + modmark; - -#if defined (HANDLE_MULTIBYTE) - memset (line_state_invisible->wrapped_line, 0, line_state_invisible->wbsize * sizeof (int)); - num = 0; -#endif - - /* prompt_invis_chars_first_line is the number of invisible characters in - the first physical line of the prompt. - wrap_offset - prompt_invis_chars_first_line is usually the number of - invis chars on the second (or, more generally, last) line. */ - - /* This is zero-based, used to set the newlines */ - prompt_lines_estimate = lpos / _rl_screenwidth; - - /* what if lpos is already >= _rl_screenwidth before we start drawing the - contents of the command line? */ - if (lpos >= _rl_screenwidth) - { - temp = 0; - - /* first copy the linebreaks array we computed in expand_prompt */ - while (local_prompt_newlines[newlines+1] != -1) - { - temp = local_prompt_newlines[newlines+1]; - inv_lbreaks[++newlines] = temp; - } - - /* Now set lpos from the last newline */ - if (mb_cur_max > 1 && rl_byte_oriented == 0 && prompt_multibyte_chars > 0) - lpos = _rl_col_width (local_prompt, temp, local_prompt_len, 1) - (wrap_offset - prompt_invis_chars_first_line); - else - lpos -= (_rl_screenwidth * newlines); - } - - prompt_last_screen_line = newlines; - - /* Draw the rest of the line (after the prompt) into invisible_line, keeping - track of where the cursor is (cpos_buffer_position), the number of the - line containing the cursor (lb_linenum), the last line number (lb_botlin - and inv_botlin). - It maintains an array of line breaks for display (inv_lbreaks). - This handles expanding tabs for display and displaying meta characters. */ - lb_linenum = 0; -#if defined (HANDLE_MULTIBYTE) - in = 0; - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - memset (&ps, 0, sizeof (mbstate_t)); - if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[0])) - { - wc = (wchar_t)rl_line_buffer[0]; - wc_bytes = 1; - } - else - wc_bytes = mbrtowc (&wc, rl_line_buffer, rl_end, &ps); - } - else - wc_bytes = 1; - while (in < rl_end) -#else - for (in = 0; in < rl_end; in++) -#endif - { - c = (unsigned char)rl_line_buffer[in]; - -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - if (MB_INVALIDCH (wc_bytes)) - { - /* Byte sequence is invalid or shortened. Assume that the - first byte represents a character. */ - wc_bytes = 1; - /* Assume that a character occupies a single column. */ - wc_width = 1; - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (wc_bytes)) - break; /* Found '\0' */ - else - { - temp = WCWIDTH (wc); - wc_width = (temp >= 0) ? temp : 1; - } - } -#endif - - if (out + 8 >= line_size) /* XXX - 8 for \t */ - { - line_size *= 2; - visible_line = (char *)xrealloc (visible_line, line_size); - invisible_line = (char *)xrealloc (invisible_line, line_size); - line = invisible_line; - } - - if (in == rl_point) - { - cpos_buffer_position = out; - lb_linenum = newlines; - } - -#if defined (HANDLE_MULTIBYTE) - if (META_CHAR (c) && _rl_output_meta_chars == 0) /* XXX - clean up */ -#else - if (META_CHAR (c)) -#endif - { - if (_rl_output_meta_chars == 0) - { - sprintf (line + out, "\\%o", c); - - if (lpos + 4 >= _rl_screenwidth) - { - temp = _rl_screenwidth - lpos; - CHECK_INV_LBREAKS (); - inv_lbreaks[++newlines] = out + temp; -#if defined (HANDLE_MULTIBYTE) - line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; -#endif - lpos = 4 - temp; - } - else - lpos += 4; - - out += 4; - } - else - { - line[out++] = c; - CHECK_LPOS(); - } - } -#if defined (DISPLAY_TABS) - else if (c == '\t') - { - register int newout; - -#if 0 - newout = (out | (int)7) + 1; -#else - newout = out + 8 - lpos % 8; -#endif - temp = newout - out; - if (lpos + temp >= _rl_screenwidth) - { - register int temp2; - temp2 = _rl_screenwidth - lpos; - CHECK_INV_LBREAKS (); - inv_lbreaks[++newlines] = out + temp2; -#if defined (HANDLE_MULTIBYTE) - line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; -#endif - lpos = temp - temp2; - while (out < newout) - line[out++] = ' '; - } - else - { - while (out < newout) - line[out++] = ' '; - lpos += temp; - } - } -#endif - else if (c == '\n' && _rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up) - { - line[out++] = '\0'; /* XXX - sentinel */ - CHECK_INV_LBREAKS (); - inv_lbreaks[++newlines] = out; -#if defined (HANDLE_MULTIBYTE) - line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; -#endif - lpos = 0; - } - else if (CTRL_CHAR (c) || c == RUBOUT) - { - line[out++] = '^'; - CHECK_LPOS(); - line[out++] = CTRL_CHAR (c) ? UNCTRL (c) : '?'; - CHECK_LPOS(); - } - else - { -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - register int i; - - _rl_wrapped_multicolumn = 0; - - if (_rl_screenwidth < lpos + wc_width) - for (i = lpos; i < _rl_screenwidth; i++) - { - /* The space will be removed in update_line() */ - line[out++] = ' '; - _rl_wrapped_multicolumn++; - CHECK_LPOS(); - } - if (in == rl_point) - { - cpos_buffer_position = out; - lb_linenum = newlines; - } - for (i = in; i < in+wc_bytes; i++) - line[out++] = rl_line_buffer[i]; - for (i = 0; i < wc_width; i++) - CHECK_LPOS(); - } - else - { - line[out++] = c; - CHECK_LPOS(); - } -#else - line[out++] = c; - CHECK_LPOS(); -#endif - } - -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - in += wc_bytes; - if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[in])) - { - wc = (wchar_t)rl_line_buffer[in]; - wc_bytes = 1; - memset (&ps, 0, sizeof (mbstate_t)); /* re-init state */ - } - else - wc_bytes = mbrtowc (&wc, rl_line_buffer + in, rl_end - in, &ps); - } - else - in++; -#endif - } - line[out] = '\0'; - line_totbytes = out; - if (cpos_buffer_position < 0) - { - cpos_buffer_position = out; - lb_linenum = newlines; - } - - inv_botlin = lb_botlin = _rl_inv_botlin = newlines; - CHECK_INV_LBREAKS (); - inv_lbreaks[newlines+1] = out; -#if defined (HANDLE_MULTIBYTE) - /* This should be 0 anyway */ - line_state_invisible->wrapped_line[newlines+1] = _rl_wrapped_multicolumn; -#endif - cursor_linenum = lb_linenum; - - /* CPOS_BUFFER_POSITION == position in buffer where cursor should be placed. - CURSOR_LINENUM == line number where the cursor should be placed. */ - - /* PWP: now is when things get a bit hairy. The visible and invisible - line buffers are really multiple lines, which would wrap every - (screenwidth - 1) characters. Go through each in turn, finding - the changed region and updating it. The line order is top to bottom. */ - - /* If we can move the cursor up and down, then use multiple lines, - otherwise, let long lines display in a single terminal line, and - horizontally scroll it. */ - displaying_prompt_first_line = 1; - if (_rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up) - { - int nleft, pos, changed_screen_line, tx; - - if (!rl_display_fixed || forced_display) - { - forced_display = 0; - - /* If we have more than a screenful of material to display, then - only display a screenful. We should display the last screen, - not the first. */ - if (out >= _rl_screenchars) - { -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - out = _rl_find_prev_mbchar (line, _rl_screenchars, MB_FIND_ANY); - else -#endif - out = _rl_screenchars - 1; - } - - /* The first line is at character position 0 in the buffer. The - second and subsequent lines start at inv_lbreaks[N], offset by - OFFSET (which has already been calculated above). */ - -#define INVIS_FIRST() (prompt_physical_chars > _rl_screenwidth ? prompt_invis_chars_first_line : wrap_offset) -#define WRAP_OFFSET(line, offset) ((line == 0) \ - ? (offset ? INVIS_FIRST() : 0) \ - : ((line == prompt_last_screen_line) ? wrap_offset-prompt_invis_chars_first_line : 0)) -#define W_OFFSET(line, offset) ((line) == 0 ? offset : 0) -#define VIS_LLEN(l) ((l) > _rl_vis_botlin ? 0 : (vis_lbreaks[l+1] - vis_lbreaks[l])) -#define INV_LLEN(l) (inv_lbreaks[l+1] - inv_lbreaks[l]) -#define VIS_CHARS(line) (visible_line + vis_lbreaks[line]) -#define VIS_LINE(line) ((line) > _rl_vis_botlin) ? "" : VIS_CHARS(line) -#define INV_LINE(line) (invisible_line + inv_lbreaks[line]) - -#define OLD_CPOS_IN_PROMPT() (cpos_adjusted == 0 && \ - _rl_last_c_pos != o_cpos && \ - _rl_last_c_pos > wrap_offset && \ - o_cpos < prompt_last_invisible) - - /* For each line in the buffer, do the updating display. */ - for (linenum = 0; linenum <= inv_botlin; linenum++) - { - /* This can lead us astray if we execute a program that changes - the locale from a non-multibyte to a multibyte one. */ - o_cpos = _rl_last_c_pos; - cpos_adjusted = 0; - update_line (VIS_LINE(linenum), INV_LINE(linenum), linenum, - VIS_LLEN(linenum), INV_LLEN(linenum), inv_botlin); - - /* update_line potentially changes _rl_last_c_pos, but doesn't - take invisible characters into account, since _rl_last_c_pos - is an absolute cursor position in a multibyte locale. We - choose to (mostly) compensate for that here, rather than - change update_line itself. There are several cases in which - update_line adjusts _rl_last_c_pos itself (so it can pass - _rl_move_cursor_relative accurate values); it communicates - this back by setting cpos_adjusted. If we assume that - _rl_last_c_pos is correct (an absolute cursor position) each - time update_line is called, then we can assume in our - calculations that o_cpos does not need to be adjusted by - wrap_offset. */ - if (linenum == 0 && (mb_cur_max > 1 && rl_byte_oriented == 0) && OLD_CPOS_IN_PROMPT()) - _rl_last_c_pos -= prompt_invis_chars_first_line; /* XXX - was wrap_offset */ - else if (cpos_adjusted == 0 && - linenum == prompt_last_screen_line && - prompt_physical_chars > _rl_screenwidth && - (mb_cur_max > 1 && rl_byte_oriented == 0) && - _rl_last_c_pos != o_cpos && - _rl_last_c_pos > (prompt_last_invisible - _rl_screenwidth - prompt_invis_chars_first_line)) /* XXX - rethink this last one */ - /* This assumes that all the invisible characters are split - between the first and last lines of the prompt, if the - prompt consumes more than two lines. It's usually right */ - /* XXX - not sure this is ever executed */ - _rl_last_c_pos -= (wrap_offset-prompt_invis_chars_first_line); - - /* If this is the line with the prompt, we might need to - compensate for invisible characters in the new line. Do - this only if there is not more than one new line (which - implies that we completely overwrite the old visible line) - and the new line is shorter than the old. Make sure we are - at the end of the new line before clearing. */ - if (linenum == 0 && - inv_botlin == 0 && _rl_last_c_pos == out && - (wrap_offset > visible_wrap_offset) && - (_rl_last_c_pos < visible_first_line_len)) - { - if (mb_cur_max > 1 && rl_byte_oriented == 0) - nleft = _rl_screenwidth - _rl_last_c_pos; - else - nleft = _rl_screenwidth + wrap_offset - _rl_last_c_pos; - if (nleft) - _rl_clear_to_eol (nleft); - } -#if 0 - /* This segment is intended to handle the case where the prompt - has invisible characters on the second line and the new line - to be displayed needs to clear the rest of the old characters - out (e.g., when printing the i-search prompt). In general, - the case of the new line being shorter than the old. - Incomplete */ - else if (linenum == prompt_last_screen_line && - prompt_physical_chars > _rl_screenwidth && - wrap_offset != prompt_invis_chars_first_line && - _rl_last_c_pos == out && -#endif - - - /* Since the new first line is now visible, save its length. */ - if (linenum == 0) - visible_first_line_len = (inv_botlin > 0) ? inv_lbreaks[1] : out - wrap_offset; - } - - /* We may have deleted some lines. If so, clear the left over - blank ones at the bottom out. */ - if (_rl_vis_botlin > inv_botlin) - { - char *tt; - for (; linenum <= _rl_vis_botlin; linenum++) - { - tt = VIS_CHARS (linenum); - _rl_move_vert (linenum); - _rl_move_cursor_relative (0, tt); - _rl_clear_to_eol - ((linenum == _rl_vis_botlin) ? strlen (tt) : _rl_screenwidth); - } - } - _rl_vis_botlin = inv_botlin; - - /* CHANGED_SCREEN_LINE is set to 1 if we have moved to a - different screen line during this redisplay. */ - changed_screen_line = _rl_last_v_pos != cursor_linenum; - if (changed_screen_line) - { - _rl_move_vert (cursor_linenum); - /* If we moved up to the line with the prompt using _rl_term_up, - the physical cursor position on the screen stays the same, - but the buffer position needs to be adjusted to account - for invisible characters. */ - if ((mb_cur_max == 1 || rl_byte_oriented) && cursor_linenum == 0 && wrap_offset) - _rl_last_c_pos += wrap_offset; - } - - /* Now we move the cursor to where it needs to be. First, make - sure we are on the correct line (cursor_linenum). */ - - /* We have to reprint the prompt if it contains invisible - characters, since it's not generally OK to just reprint - the characters from the current cursor position. But we - only need to reprint it if the cursor is before the last - invisible character in the prompt string. */ - nleft = prompt_visible_length + wrap_offset; - if (cursor_linenum == 0 && wrap_offset > 0 && _rl_last_c_pos > 0 && -#if 0 - _rl_last_c_pos <= PROMPT_ENDING_INDEX && local_prompt) -#else - _rl_last_c_pos < PROMPT_ENDING_INDEX && local_prompt) -#endif - { -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - if (_rl_term_cr) - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - if (modmark) - _rl_output_some_chars ("*", 1); - - _rl_output_some_chars (local_prompt, nleft); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - _rl_last_c_pos = _rl_col_width (local_prompt, 0, nleft, 1) - wrap_offset + modmark; - else - _rl_last_c_pos = nleft + modmark; - } - - /* Where on that line? And where does that line start - in the buffer? */ - pos = inv_lbreaks[cursor_linenum]; - /* nleft == number of characters in the line buffer between the - start of the line and the desired cursor position. */ - nleft = cpos_buffer_position - pos; - - /* NLEFT is now a number of characters in a buffer. When in a - multibyte locale, however, _rl_last_c_pos is an absolute cursor - position that doesn't take invisible characters in the prompt - into account. We use a fudge factor to compensate. */ - - /* Since _rl_backspace() doesn't know about invisible characters in - the prompt, and there's no good way to tell it, we compensate for - those characters here and call _rl_backspace() directly if - necessary */ - if (wrap_offset && cursor_linenum == 0 && nleft < _rl_last_c_pos) - { - /* TX == new physical cursor position in multibyte locale. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - tx = _rl_col_width (&visible_line[pos], 0, nleft, 1) - visible_wrap_offset; - else - tx = nleft; - if (tx >= 0 && _rl_last_c_pos > tx) - { - _rl_backspace (_rl_last_c_pos - tx); /* XXX */ - _rl_last_c_pos = tx; - } - } - - /* We need to note that in a multibyte locale we are dealing with - _rl_last_c_pos as an absolute cursor position, but moving to a - point specified by a buffer position (NLEFT) that doesn't take - invisible characters into account. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - _rl_move_cursor_relative (nleft, &invisible_line[pos]); - else if (nleft != _rl_last_c_pos) - _rl_move_cursor_relative (nleft, &invisible_line[pos]); - } - } - else /* Do horizontal scrolling. Much simpler */ - { -#define M_OFFSET(margin, offset) ((margin) == 0 ? offset : 0) - int lmargin, ndisp, nleft, phys_c_pos, t; - - /* Always at top line. */ - _rl_last_v_pos = 0; - - /* Compute where in the buffer the displayed line should start. This - will be LMARGIN. */ - - /* The number of characters that will be displayed before the cursor. */ - ndisp = cpos_buffer_position - wrap_offset; - nleft = prompt_visible_length + wrap_offset; - /* Where the new cursor position will be on the screen. This can be - longer than SCREENWIDTH; if it is, lmargin will be adjusted. */ - phys_c_pos = cpos_buffer_position - (last_lmargin ? last_lmargin : wrap_offset); - t = _rl_screenwidth / 3; - - /* If the number of characters had already exceeded the screenwidth, - last_lmargin will be > 0. */ - - /* If the number of characters to be displayed is more than the screen - width, compute the starting offset so that the cursor is about - two-thirds of the way across the screen. */ - if (phys_c_pos > _rl_screenwidth - 2) - { - lmargin = cpos_buffer_position - (2 * t); - if (lmargin < 0) - lmargin = 0; - /* If the left margin would be in the middle of a prompt with - invisible characters, don't display the prompt at all. */ - if (wrap_offset && lmargin > 0 && lmargin < nleft) - lmargin = nleft; - } - else if (ndisp < _rl_screenwidth - 2) /* XXX - was -1 */ - lmargin = 0; - else if (phys_c_pos < 1) - { - /* If we are moving back towards the beginning of the line and - the last margin is no longer correct, compute a new one. */ - lmargin = ((cpos_buffer_position - 1) / t) * t; /* XXX */ - if (wrap_offset && lmargin > 0 && lmargin < nleft) - lmargin = nleft; - } - else - lmargin = last_lmargin; - - displaying_prompt_first_line = lmargin < nleft; - - /* If the first character on the screen isn't the first character - in the display line, indicate this with a special character. */ - if (lmargin > 0) - line[lmargin] = '<'; - - /* If SCREENWIDTH characters starting at LMARGIN do not encompass - the whole line, indicate that with a special character at the - right edge of the screen. If LMARGIN is 0, we need to take the - wrap offset into account. */ - t = lmargin + M_OFFSET (lmargin, wrap_offset) + _rl_screenwidth; - if (t > 0 && t < out) - line[t - 1] = '>'; - - if (rl_display_fixed == 0 || forced_display || lmargin != last_lmargin) - { - forced_display = 0; - o_cpos = _rl_last_c_pos; - cpos_adjusted = 0; - update_line (&visible_line[last_lmargin], - &invisible_line[lmargin], - 0, - _rl_screenwidth + visible_wrap_offset, - _rl_screenwidth + (lmargin ? 0 : wrap_offset), - 0); - - if ((mb_cur_max > 1 && rl_byte_oriented == 0) && - displaying_prompt_first_line && OLD_CPOS_IN_PROMPT()) - _rl_last_c_pos -= prompt_invis_chars_first_line; /* XXX - was wrap_offset */ - - /* If the visible new line is shorter than the old, but the number - of invisible characters is greater, and we are at the end of - the new line, we need to clear to eol. */ - t = _rl_last_c_pos - M_OFFSET (lmargin, wrap_offset); - if ((M_OFFSET (lmargin, wrap_offset) > visible_wrap_offset) && - (_rl_last_c_pos == out) && displaying_prompt_first_line && - t < visible_first_line_len) - { - nleft = _rl_screenwidth - t; - _rl_clear_to_eol (nleft); - } - visible_first_line_len = out - lmargin - M_OFFSET (lmargin, wrap_offset); - if (visible_first_line_len > _rl_screenwidth) - visible_first_line_len = _rl_screenwidth; - - _rl_move_cursor_relative (cpos_buffer_position - lmargin, &invisible_line[lmargin]); - last_lmargin = lmargin; - } - } - fflush (rl_outstream); - - /* Swap visible and non-visible lines. */ - { - struct line_state *vtemp = line_state_visible; - - line_state_visible = line_state_invisible; - line_state_invisible = vtemp; - - rl_display_fixed = 0; - /* If we are displaying on a single line, and last_lmargin is > 0, we - are not displaying any invisible characters, so set visible_wrap_offset - to 0. */ - if (_rl_horizontal_scroll_mode && last_lmargin) - visible_wrap_offset = 0; - else - visible_wrap_offset = wrap_offset; - } - - RL_UNSETSTATE (RL_STATE_REDISPLAYING); - _rl_release_sigint (); -} - -/* PWP: update_line() is based on finding the middle difference of each - line on the screen; vis: - - /old first difference - /beginning of line | /old last same /old EOL - v v v v -old: eddie> Oh, my little gruntle-buggy is to me, as lurgid as -new: eddie> Oh, my little buggy says to me, as lurgid as - ^ ^ ^ ^ - \beginning of line | \new last same \new end of line - \new first difference - - All are character pointers for the sake of speed. Special cases for - no differences, as well as for end of line additions must be handled. - - Could be made even smarter, but this works well enough */ -static void -update_line (char *old, char *new, int current_line, int omax, int nmax, int inv_botlin) -{ - register char *ofd, *ols, *oe, *nfd, *nls, *ne; - int temp, lendiff, wsatend, od, nd, twidth, o_cpos; - int current_invis_chars; - int col_lendiff, col_temp; - int bytes_to_insert; - int mb_cur_max = MB_CUR_MAX; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps_new, ps_old; - int new_offset, old_offset; -#endif - - /* If we're at the right edge of a terminal that supports xn, we're - ready to wrap around, so do so. This fixes problems with knowing - the exact cursor position and cut-and-paste with certain terminal - emulators. In this calculation, TEMP is the physical screen - position of the cursor. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - temp = _rl_last_c_pos; - else - temp = _rl_last_c_pos - WRAP_OFFSET (_rl_last_v_pos, visible_wrap_offset); - if (temp == _rl_screenwidth && _rl_term_autowrap && !_rl_horizontal_scroll_mode - && _rl_last_v_pos == current_line - 1) - { - /* We're going to wrap around by writing the first character of NEW to - the screen and dealing with changes to what's visible by modifying - OLD to match it. Complicated by the presence of multi-width - characters at the end of the line or beginning of the new one. */ - /* old is always somewhere in visible_line; new is always somewhere in - invisible_line. These should always be null-terminated. */ -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - wchar_t wc; - mbstate_t ps; - int oldwidth, newwidth; - int oldbytes, newbytes; - size_t ret; - - /* This fixes only double-column characters, but if the wrapped - character consumes more than three columns, spaces will be - inserted in the string buffer. */ - /* XXX remember that we are working on the invisible line right now; - we don't swap visible and invisible until just before rl_redisplay - returns */ - /* This will remove the extra placeholder space we added with - _rl_wrapped_multicolumn */ - if (current_line < line_state_invisible->wbsize && line_state_invisible->wrapped_line[current_line] > 0) - _rl_clear_to_eol (line_state_invisible->wrapped_line[current_line]); - - /* 1. how many screen positions does first char in old consume? */ - memset (&ps, 0, sizeof (mbstate_t)); - ret = mbrtowc (&wc, old, mb_cur_max, &ps); - oldbytes = ret; - if (MB_INVALIDCH (ret)) - { - oldwidth = 1; - oldbytes = 1; - } - else if (MB_NULLWCH (ret)) - oldwidth = 0; - else - oldwidth = WCWIDTH (wc); - if (oldwidth < 0) - oldwidth = 1; - - /* 2. how many screen positions does the first char in new consume? */ - memset (&ps, 0, sizeof (mbstate_t)); - ret = mbrtowc (&wc, new, mb_cur_max, &ps); - newbytes = ret; - if (MB_INVALIDCH (ret)) - { - newwidth = 1; - newbytes = 1; - } - else if (MB_NULLWCH (ret)) - newwidth = 0; - else - newwidth = WCWIDTH (wc); - if (newwidth < 0) - newwidth = 1; - - /* 3. if the new width is less than the old width, we need to keep - going in new until we have consumed at least that many screen - positions, and figure out how many bytes that will take */ - while (newbytes < nmax && newwidth < oldwidth) - { - int t; - - ret = mbrtowc (&wc, new+newbytes, mb_cur_max, &ps); - if (MB_INVALIDCH (ret)) - { - newwidth += 1; - newbytes += 1; - } - else if (MB_NULLWCH (ret)) - break; - else - { - t = WCWIDTH (wc); - newwidth += (t >= 0) ? t : 1; - newbytes += ret; - } - } - /* 4. If the new width is more than the old width, keep going in old - until we have consumed exactly that many screen positions, and - figure out how many bytes that will take. This is an optimization */ - while (oldbytes < omax && oldwidth < newwidth) - { - int t; - - ret = mbrtowc (&wc, old+oldbytes, mb_cur_max, &ps); - if (MB_INVALIDCH (ret)) - { - oldwidth += 1; - oldbytes += 1; - } - else if (MB_NULLWCH (ret)) - break; - else - { - t = WCWIDTH (wc); - oldwidth += (t >= 0) ? t : 1; - oldbytes += ret; - } - } - /* 5. write the first newbytes of new, which takes newwidth. This is - where the screen wrapping takes place, and we are now writing - characters onto the new line. We need to fix up old so it - accurately reflects what is on the screen after the - _rl_output_some_chars below. */ - if (newwidth > 0) - { - int count, i, j; - char *optr; - - _rl_output_some_chars (new, newbytes); - _rl_last_c_pos = newwidth; - _rl_last_v_pos++; - - /* 5a. If the number of screen positions doesn't match, punt - and do a dumb update. */ - if (newwidth != oldwidth) - { - ne = new + nmax; - nd = newbytes; - nfd = new + nd; - goto dumb_update; - } - if (oldbytes != 0 && newbytes != 0) - { - /* We have written as many bytes from new as we need to - consume the first character of old. Fix up `old' so it - reflects the new screen contents. We use +1 in the - memmove call to copy the trailing NUL. */ - memmove (old+newbytes, old+oldbytes, strlen (old+oldbytes) + 1); - memcpy (old, new, newbytes); - j = newbytes - oldbytes; - - omax += j; - /* Fix up indices if we copy data from one line to another */ - for (i = current_line+1; i <= inv_botlin+1; i++) - vis_lbreaks[i] += j; - } - } - else - { - putc (' ', rl_outstream); - _rl_last_c_pos = 1; - _rl_last_v_pos++; - if (old[0] && new[0]) - old[0] = new[0]; - } - } - else -#endif - { - if (new[0]) - putc (new[0], rl_outstream); - else - putc (' ', rl_outstream); - _rl_last_c_pos = 1; - _rl_last_v_pos++; - if (old[0] && new[0]) - old[0] = new[0]; - } - } - - /* Find first difference. */ -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - /* See if the old line is a subset of the new line, so that the - only change is adding characters. */ - temp = (omax < nmax) ? omax : nmax; - if (memcmp (old, new, temp) == 0) /* adding at the end */ - { - new_offset = old_offset = temp; - ofd = old + temp; - nfd = new + temp; - } - else - { - memset (&ps_new, 0, sizeof(mbstate_t)); - memset (&ps_old, 0, sizeof(mbstate_t)); - - /* Are the old and new lines the same? */ - if (omax == nmax && STREQN (new, old, omax)) - { - old_offset = omax; - new_offset = nmax; - ofd = old + omax; - nfd = new + nmax; - } - else - { - /* Go through the line from the beginning and find the first - difference. */ - new_offset = old_offset = 0; - for (ofd = old, nfd = new; - (ofd - old < omax) && *ofd && - _rl_compare_chars(old, old_offset, &ps_old, new, new_offset, &ps_new); ) - { - old_offset = _rl_find_next_mbchar (old, old_offset, 1, MB_FIND_ANY); - new_offset = _rl_find_next_mbchar (new, new_offset, 1, MB_FIND_ANY); - - ofd = old + old_offset; - nfd = new + new_offset; - } - } - } - } - else -#endif - for (ofd = old, nfd = new; - (ofd - old < omax) && *ofd && (*ofd == *nfd); - ofd++, nfd++) - ; - - /* Move to the end of the screen line. ND and OD are used to keep track - of the distance between ne and new and oe and old, respectively, to - move a subtraction out of each loop. */ - for (od = ofd - old, oe = ofd; od < omax && *oe; oe++, od++); - for (nd = nfd - new, ne = nfd; nd < nmax && *ne; ne++, nd++); - - /* If no difference, continue to next line. */ - if (ofd == oe && nfd == ne) - return; - -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0 && _rl_utf8locale) - { - wchar_t wc; - mbstate_t ps = { 0 }; - int t; - - /* If the first character in the difference is a zero-width character, - assume it's a combining character and back one up so the two base - characters no longer compare equivalently. */ - t = mbrtowc (&wc, ofd, mb_cur_max, &ps); - if (t > 0 && UNICODE_COMBINING_CHAR (wc) && WCWIDTH (wc) == 0) - { - old_offset = _rl_find_prev_mbchar (old, ofd - old, MB_FIND_ANY); - new_offset = _rl_find_prev_mbchar (new, nfd - new, MB_FIND_ANY); - ofd = old + old_offset; /* equal by definition */ - nfd = new + new_offset; - } - } -#endif - - wsatend = 1; /* flag for trailing whitespace */ - -#if defined (HANDLE_MULTIBYTE) - /* Find the last character that is the same between the two lines. This - bounds the region that needs to change. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - ols = old + _rl_find_prev_mbchar (old, oe - old, MB_FIND_ANY); - nls = new + _rl_find_prev_mbchar (new, ne - new, MB_FIND_ANY); - - while ((ols > ofd) && (nls > nfd)) - { - memset (&ps_old, 0, sizeof (mbstate_t)); - memset (&ps_new, 0, sizeof (mbstate_t)); - -#if 0 - /* On advice from jir@yamato.ibm.com */ - _rl_adjust_point (old, ols - old, &ps_old); - _rl_adjust_point (new, nls - new, &ps_new); -#endif - - if (_rl_compare_chars (old, ols - old, &ps_old, new, nls - new, &ps_new) == 0) - break; - - if (*ols == ' ') - wsatend = 0; - - ols = old + _rl_find_prev_mbchar (old, ols - old, MB_FIND_ANY); - nls = new + _rl_find_prev_mbchar (new, nls - new, MB_FIND_ANY); - } - } - else - { -#endif /* HANDLE_MULTIBYTE */ - ols = oe - 1; /* find last same */ - nls = ne - 1; - while ((ols > ofd) && (nls > nfd) && (*ols == *nls)) - { - if (*ols != ' ') - wsatend = 0; - ols--; - nls--; - } -#if defined (HANDLE_MULTIBYTE) - } -#endif - - if (wsatend) - { - ols = oe; - nls = ne; - } -#if defined (HANDLE_MULTIBYTE) - /* This may not work for stateful encoding, but who cares? To handle - stateful encoding properly, we have to scan each string from the - beginning and compare. */ - else if (_rl_compare_chars (ols, 0, NULL, nls, 0, NULL) == 0) -#else - else if (*ols != *nls) -#endif - { - if (*ols) /* don't step past the NUL */ - { - if (mb_cur_max > 1 && rl_byte_oriented == 0) - ols = old + _rl_find_next_mbchar (old, ols - old, 1, MB_FIND_ANY); - else - ols++; - } - if (*nls) - { - if (mb_cur_max > 1 && rl_byte_oriented == 0) - nls = new + _rl_find_next_mbchar (new, nls - new, 1, MB_FIND_ANY); - else - nls++; - } - } - - /* count of invisible characters in the current invisible line. */ - current_invis_chars = W_OFFSET (current_line, wrap_offset); - if (_rl_last_v_pos != current_line) - { - _rl_move_vert (current_line); - /* We have moved up to a new screen line. This line may or may not have - invisible characters on it, but we do our best to recalculate - visible_wrap_offset based on what we know. */ - if (current_line == 0) - visible_wrap_offset = prompt_invis_chars_first_line; /* XXX */ - if ((mb_cur_max == 1 || rl_byte_oriented) && current_line == 0 && visible_wrap_offset) - _rl_last_c_pos += visible_wrap_offset; - } - - /* If this is the first line and there are invisible characters in the - prompt string, and the prompt string has not changed, and the current - cursor position is before the last invisible character in the prompt, - and the index of the character to move to is past the end of the prompt - string, then redraw the entire prompt string. We can only do this - reliably if the terminal supports a `cr' capability. - - This can also happen if the prompt string has changed, and the first - difference in the line is in the middle of the prompt string, after a - sequence of invisible characters (worst case) and before the end of - the prompt. In this case, we have to redraw the entire prompt string - so that the entire sequence of invisible characters is drawn. We need - to handle the worst case, when the difference is after (or in the middle - of) a sequence of invisible characters that changes the text color and - before the sequence that restores the text color to normal. Then we have - to make sure that the lines still differ -- if they don't, we can - return immediately. - - This is not an efficiency hack -- there is a problem with redrawing - portions of the prompt string if they contain terminal escape - sequences (like drawing the `unbold' sequence without a corresponding - `bold') that manifests itself on certain terminals. */ - - lendiff = local_prompt_len; - if (lendiff > nmax) - lendiff = nmax; - od = ofd - old; /* index of first difference in visible line */ - nd = nfd - new; /* nd, od are buffer indexes */ - if (current_line == 0 && !_rl_horizontal_scroll_mode && - _rl_term_cr && lendiff > prompt_visible_length && _rl_last_c_pos > 0 && - (((od > 0 || nd > 0) && (od <= prompt_last_invisible || nd <= prompt_last_invisible)) || - ((od >= lendiff) && _rl_last_c_pos < PROMPT_ENDING_INDEX))) - { -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - if (modmark) - _rl_output_some_chars ("*", 1); - _rl_output_some_chars (local_prompt, lendiff); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - /* We take wrap_offset into account here so we can pass correct - information to _rl_move_cursor_relative. */ - _rl_last_c_pos = _rl_col_width (local_prompt, 0, lendiff, 1) - wrap_offset + modmark; - cpos_adjusted = 1; - } - else - _rl_last_c_pos = lendiff + modmark; - - /* Now if we have printed the prompt string because the first difference - was within the prompt, see if we need to recompute where the lines - differ. Check whether where we are now is past the last place where - the old and new lines are the same and short-circuit now if we are. */ - if ((od <= prompt_last_invisible || nd <= prompt_last_invisible) && - omax == nmax && - lendiff > (ols-old) && lendiff > (nls-new)) - return; - - /* XXX - we need to fix up our calculations if we are now past the - old ofd/nfd and the prompt length (or line length) has changed. - We punt on the problem and do a dumb update. We'd like to be able - to just output the prompt from the beginning of the line up to the - first difference, but you don't know the number of invisible - characters in that case. - This needs a lot of work to be efficient. */ - if ((od <= prompt_last_invisible || nd <= prompt_last_invisible)) - { - nfd = new + lendiff; /* number of characters we output above */ - nd = lendiff; - - /* Do a dumb update and return */ -dumb_update: - temp = ne - nfd; - if (temp > 0) - { - _rl_output_some_chars (nfd, temp); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - _rl_last_c_pos += _rl_col_width (new, nd, ne - new, 1); - /* Need to adjust here based on wrap_offset. Guess that if - this is the line containing the last line of the prompt - we need to adjust by - wrap_offset-prompt_invis_chars_first_line - on the assumption that this is the number of invisible - characters in the last line of the prompt. */ - if (wrap_offset > prompt_invis_chars_first_line && - current_line == prompt_last_screen_line && - prompt_physical_chars > _rl_screenwidth && - _rl_horizontal_scroll_mode == 0) - { - _rl_last_c_pos -= wrap_offset - prompt_invis_chars_first_line; - cpos_adjusted = 1; - } - } - else - _rl_last_c_pos += temp; - } - if (nmax < omax) - goto clear_rest_of_line; /* XXX */ - else - return; - } - } - - o_cpos = _rl_last_c_pos; - - /* When this function returns, _rl_last_c_pos is correct, and an absolute - cursor position in multibyte mode, but a buffer index when not in a - multibyte locale. */ - _rl_move_cursor_relative (od, old); - -#if defined (HANDLE_MULTIBYTE) - /* We need to indicate that the cursor position is correct in the presence of - invisible characters in the prompt string. Let's see if setting this when - we make sure we're at the end of the drawn prompt string works. */ - if (current_line == 0 && mb_cur_max > 1 && rl_byte_oriented == 0 && - (_rl_last_c_pos > 0 || o_cpos > 0) && - _rl_last_c_pos == prompt_physical_chars) - cpos_adjusted = 1; -#endif - - /* if (len (new) > len (old)) - lendiff == difference in buffer (bytes) - col_lendiff == difference on screen (columns) - When not using multibyte characters, these are equal */ - lendiff = (nls - nfd) - (ols - ofd); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - col_lendiff = _rl_col_width (new, nfd - new, nls - new, 1) - _rl_col_width (old, ofd - old, ols - old, 1); - else - col_lendiff = lendiff; - - /* If we are changing the number of invisible characters in a line, and - the spot of first difference is before the end of the invisible chars, - lendiff needs to be adjusted. */ - if (current_line == 0 && /* !_rl_horizontal_scroll_mode && */ - current_invis_chars != visible_wrap_offset) - { - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - lendiff += visible_wrap_offset - current_invis_chars; - col_lendiff += visible_wrap_offset - current_invis_chars; - } - else - { - lendiff += visible_wrap_offset - current_invis_chars; - col_lendiff = lendiff; - } - } - - /* We use temp as a count of the number of bytes from the first difference - to the end of the new line. col_temp is the corresponding number of - screen columns. A `dumb' update moves to the spot of first difference - and writes TEMP bytes. */ - /* Insert (diff (len (old), len (new)) ch. */ - temp = ne - nfd; - if (mb_cur_max > 1 && rl_byte_oriented == 0) - col_temp = _rl_col_width (new, nfd - new, ne - new, 1); - else - col_temp = temp; - - /* how many bytes from the new line buffer to write to the display */ - bytes_to_insert = nls - nfd; - - /* col_lendiff > 0 if we are adding characters to the line */ - if (col_lendiff > 0) /* XXX - was lendiff */ - { - /* Non-zero if we're increasing the number of lines. */ - int gl = current_line >= _rl_vis_botlin && inv_botlin > _rl_vis_botlin; - - /* If col_lendiff is > 0, implying that the new string takes up more - screen real estate than the old, but lendiff is < 0, meaning that it - takes fewer bytes, we need to just output the characters starting - from the first difference. These will overwrite what is on the - display, so there's no reason to do a smart update. This can really - only happen in a multibyte environment. */ - if (lendiff < 0) - { - _rl_output_some_chars (nfd, temp); - _rl_last_c_pos += col_temp; /* XXX - was _rl_col_width (nfd, 0, temp, 1); */ - /* If nfd begins before any invisible characters in the prompt, - adjust _rl_last_c_pos to account for wrap_offset and set - cpos_adjusted to let the caller know. */ - if (current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) - { - _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ - cpos_adjusted = 1; - } - return; - } - /* Sometimes it is cheaper to print the characters rather than - use the terminal's capabilities. If we're growing the number - of lines, make sure we actually cause the new line to wrap - around on auto-wrapping terminals. */ - else if (_rl_terminal_can_insert && ((2 * col_temp) >= col_lendiff || _rl_term_IC) && (!_rl_term_autowrap || !gl)) - { - /* If lendiff > prompt_visible_length and _rl_last_c_pos == 0 and - _rl_horizontal_scroll_mode == 1, inserting the characters with - _rl_term_IC or _rl_term_ic will screw up the screen because of the - invisible characters. We need to just draw them. */ - /* The same thing happens if we're trying to draw before the last - invisible character in the prompt string or we're increasing the - number of invisible characters in the line and we're not drawing - the entire prompt string. */ - if (*ols && ((_rl_horizontal_scroll_mode && - _rl_last_c_pos == 0 && - lendiff > prompt_visible_length && - current_invis_chars > 0) == 0) && - (((mb_cur_max > 1 && rl_byte_oriented == 0) && - current_line == 0 && wrap_offset && - ((nfd - new) <= prompt_last_invisible) && - (col_lendiff < prompt_visible_length)) == 0) && - (visible_wrap_offset >= current_invis_chars)) - { - open_some_spaces (col_lendiff); - _rl_output_some_chars (nfd, bytes_to_insert); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - _rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1); - else - _rl_last_c_pos += bytes_to_insert; - } - else if ((mb_cur_max == 1 || rl_byte_oriented != 0) && *ols == 0 && lendiff > 0) - { - /* At the end of a line the characters do not have to - be "inserted". They can just be placed on the screen. */ - _rl_output_some_chars (nfd, temp); - _rl_last_c_pos += col_temp; - return; - } - else /* just write from first difference to end of new line */ - { - _rl_output_some_chars (nfd, temp); - _rl_last_c_pos += col_temp; - /* If nfd begins before the last invisible character in the - prompt, adjust _rl_last_c_pos to account for wrap_offset - and set cpos_adjusted to let the caller know. */ - if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) - { - _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ - cpos_adjusted = 1; - } - return; - } - - if (bytes_to_insert > lendiff) - { - /* If nfd begins before the last invisible character in the - prompt, adjust _rl_last_c_pos to account for wrap_offset - and set cpos_adjusted to let the caller know. */ - if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) - { - _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ - cpos_adjusted = 1; - } - } - } - else - { - /* cannot insert chars, write to EOL */ - _rl_output_some_chars (nfd, temp); - _rl_last_c_pos += col_temp; - /* If we're in a multibyte locale and were before the last invisible - char in the current line (which implies we just output some invisible - characters) we need to adjust _rl_last_c_pos, since it represents - a physical character position. */ - /* The current_line*rl_screenwidth+prompt_invis_chars_first_line is a - crude attempt to compute how far into the new line buffer we are. - It doesn't work well in the face of multibyte characters and needs - to be rethought. XXX */ - if ((mb_cur_max > 1 && rl_byte_oriented == 0) && - current_line == prompt_last_screen_line && wrap_offset && - displaying_prompt_first_line && - wrap_offset != prompt_invis_chars_first_line && - ((nfd-new) < (prompt_last_invisible-(current_line*_rl_screenwidth+prompt_invis_chars_first_line)))) - { - _rl_last_c_pos -= wrap_offset - prompt_invis_chars_first_line; - cpos_adjusted = 1; - } - } - } - else /* Delete characters from line. */ - { - /* If possible and inexpensive to use terminal deletion, then do so. */ - if (_rl_term_dc && (2 * col_temp) >= -col_lendiff) - { - /* If all we're doing is erasing the invisible characters in the - prompt string, don't bother. It screws up the assumptions - about what's on the screen. */ - if (_rl_horizontal_scroll_mode && _rl_last_c_pos == 0 && - displaying_prompt_first_line && - -lendiff == visible_wrap_offset) - col_lendiff = 0; - - /* If we have moved lmargin and we're shrinking the line, we've - already moved the cursor to the first character of the new line, - so deleting -col_lendiff characters will mess up the cursor - position calculation */ - if (_rl_horizontal_scroll_mode && displaying_prompt_first_line == 0 && - col_lendiff && _rl_last_c_pos < -col_lendiff) - col_lendiff = 0; - - if (col_lendiff) - delete_chars (-col_lendiff); /* delete (diff) characters */ - - /* Copy (new) chars to screen from first diff to last match, - overwriting what is there. */ - if (bytes_to_insert > 0) - { - /* If nfd begins at the prompt, or before the invisible - characters in the prompt, we need to adjust _rl_last_c_pos - in a multibyte locale to account for the wrap offset and - set cpos_adjusted accordingly. */ - _rl_output_some_chars (nfd, bytes_to_insert); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - _rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1); - if (current_line == 0 && wrap_offset && - displaying_prompt_first_line && - _rl_last_c_pos >= wrap_offset && /* XXX was > */ - ((nfd - new) <= prompt_last_invisible)) - { - _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ - cpos_adjusted = 1; - } - -#if 1 -#ifdef HANDLE_MULTIBYTE - /* If we write a non-space into the last screen column, - remove the note that we added a space to compensate for - a multibyte double-width character that didn't fit, since - it's only valid for what was previously there. */ - /* XXX - watch this */ - if (_rl_last_c_pos == _rl_screenwidth && - line_state_invisible->wrapped_line[current_line+1] && - nfd[bytes_to_insert-1] != ' ') - line_state_invisible->wrapped_line[current_line+1] = 0; -#endif -#endif - } - else - _rl_last_c_pos += bytes_to_insert; - - /* XXX - we only want to do this if we are at the end of the line - so we move there with _rl_move_cursor_relative */ - if (_rl_horizontal_scroll_mode && ((oe-old) > (ne-new))) - { - _rl_move_cursor_relative (ne-new, new); - goto clear_rest_of_line; - } - } - } - /* Otherwise, print over the existing material. */ - else - { - if (temp > 0) - { - /* If nfd begins at the prompt, or before the invisible - characters in the prompt, we need to adjust _rl_last_c_pos - in a multibyte locale to account for the wrap offset and - set cpos_adjusted accordingly. */ - _rl_output_some_chars (nfd, temp); - _rl_last_c_pos += col_temp; /* XXX */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - if (current_line == 0 && wrap_offset && - displaying_prompt_first_line && - _rl_last_c_pos > wrap_offset && - ((nfd - new) <= prompt_last_invisible)) - { - _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ - cpos_adjusted = 1; - } - } - } -clear_rest_of_line: - lendiff = (oe - old) - (ne - new); - if (mb_cur_max > 1 && rl_byte_oriented == 0) - col_lendiff = _rl_col_width (old, 0, oe - old, 1) - _rl_col_width (new, 0, ne - new, 1); - else - col_lendiff = lendiff; - - /* If we've already printed over the entire width of the screen, - including the old material, then col_lendiff doesn't matter and - space_to_eol will insert too many spaces. XXX - maybe we should - adjust col_lendiff based on the difference between _rl_last_c_pos - and _rl_screenwidth */ - if (col_lendiff && ((mb_cur_max == 1 || rl_byte_oriented) || (_rl_last_c_pos < _rl_screenwidth))) - { - if (_rl_term_autowrap && current_line < inv_botlin) - space_to_eol (col_lendiff); - else - _rl_clear_to_eol (col_lendiff); - } - } - } -} - -/* Tell the update routines that we have moved onto a new (empty) line. */ -int -rl_on_new_line (void) -{ - if (visible_line) - visible_line[0] = '\0'; - - _rl_last_c_pos = _rl_last_v_pos = 0; - _rl_vis_botlin = last_lmargin = 0; - if (vis_lbreaks) - vis_lbreaks[0] = vis_lbreaks[1] = 0; - visible_wrap_offset = 0; - return 0; -} - -/* Clear all screen lines occupied by the current readline line buffer - (visible line) */ -int -rl_clear_visible_line (void) -{ - int curr_line; - - /* Make sure we move to column 0 so we clear the entire line */ -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - _rl_last_c_pos = 0; - - /* Move to the last screen line of the current visible line */ - _rl_move_vert (_rl_vis_botlin); - - /* And erase screen lines going up to line 0 (first visible line) */ - for (curr_line = _rl_last_v_pos; curr_line >= 0; curr_line--) - { - _rl_move_vert (curr_line); - _rl_clear_to_eol (0); - } - - return 0; -} - -/* Tell the update routines that we have moved onto a new line with the - prompt already displayed. Code originally from the version of readline - distributed with CLISP. rl_expand_prompt must have already been called - (explicitly or implicitly). This still doesn't work exactly right; it - should use expand_prompt() */ -int -rl_on_new_line_with_prompt (void) -{ - int prompt_size, i, l, real_screenwidth, newlines; - char *prompt_last_line, *lprompt; - - /* Initialize visible_line and invisible_line to ensure that they can hold - the already-displayed prompt. */ - prompt_size = strlen (rl_prompt) + 1; - init_line_structures (prompt_size); - - /* Make sure the line structures hold the already-displayed prompt for - redisplay. */ - lprompt = local_prompt ? local_prompt : rl_prompt; - strcpy (visible_line, lprompt); - strcpy (invisible_line, lprompt); - - /* If the prompt contains newlines, take the last tail. */ - prompt_last_line = strrchr (rl_prompt, '\n'); - if (!prompt_last_line) - prompt_last_line = rl_prompt; - - l = strlen (prompt_last_line); - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - _rl_last_c_pos = _rl_col_width (prompt_last_line, 0, l, 1); /* XXX */ - else - _rl_last_c_pos = l; - - /* Dissect prompt_last_line into screen lines. Note that here we have - to use the real screenwidth. Readline's notion of screenwidth might be - one less, see terminal.c. */ - real_screenwidth = _rl_screenwidth + (_rl_term_autowrap ? 0 : 1); - _rl_last_v_pos = l / real_screenwidth; - /* If the prompt length is a multiple of real_screenwidth, we don't know - whether the cursor is at the end of the last line, or already at the - beginning of the next line. Output a newline just to be safe. */ - if (l > 0 && (l % real_screenwidth) == 0) - _rl_output_some_chars ("\n", 1); - last_lmargin = 0; - - newlines = 0; i = 0; - while (i <= l) - { - _rl_vis_botlin = newlines; - vis_lbreaks[newlines++] = i; - i += real_screenwidth; - } - vis_lbreaks[newlines] = l; - visible_wrap_offset = 0; - - rl_display_prompt = rl_prompt; /* XXX - make sure it's set */ - - return 0; -} - -/* Actually update the display, period. */ -int -rl_forced_update_display (void) -{ - register char *temp; - - if (visible_line) - { - temp = visible_line; - while (*temp) - *temp++ = '\0'; - } - rl_on_new_line (); - forced_display++; - (*rl_redisplay_function) (); - return 0; -} - -/* Redraw only the last line of a multi-line prompt. */ -void -rl_redraw_prompt_last_line (void) -{ - char *t; - - t = strrchr (rl_display_prompt, '\n'); - if (t) - redraw_prompt (++t); - else - rl_forced_update_display (); -} - -/* Move the cursor from _rl_last_c_pos to NEW, which are buffer indices. - (Well, when we don't have multibyte characters, _rl_last_c_pos is a - buffer index.) - DATA is the contents of the screen line of interest; i.e., where - the movement is being done. - DATA is always the visible line or the invisible line */ -void -_rl_move_cursor_relative (int new, const char *data) -{ - register int i; - int woff; /* number of invisible chars on current line */ - int cpos, dpos; /* current and desired cursor positions */ - int adjust; - int in_invisline; - int mb_cur_max = MB_CUR_MAX; - - woff = WRAP_OFFSET (_rl_last_v_pos, wrap_offset); - cpos = _rl_last_c_pos; - - if (cpos == 0 && cpos == new) - return; - -#if defined (HANDLE_MULTIBYTE) - /* If we have multibyte characters, NEW is indexed by the buffer point in - a multibyte string, but _rl_last_c_pos is the display position. In - this case, NEW's display position is not obvious and must be - calculated. We need to account for invisible characters in this line, - as long as we are past them and they are counted by _rl_col_width. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - adjust = 1; - /* Try to short-circuit common cases and eliminate a bunch of multibyte - character function calls. */ - /* 1. prompt string */ - if (new == local_prompt_len && memcmp (data, local_prompt, new) == 0) - { - dpos = prompt_physical_chars; - cpos_adjusted = 1; - adjust = 0; - } - /* 2. prompt_string + line contents */ - else if (new > local_prompt_len && local_prompt && memcmp (data, local_prompt, local_prompt_len) == 0) - { - dpos = prompt_physical_chars + _rl_col_width (data, local_prompt_len, new, 1); - cpos_adjusted = 1; - adjust = 0; - } - else - dpos = _rl_col_width (data, 0, new, 1); - - if (displaying_prompt_first_line == 0) - adjust = 0; - - /* yet another special case: printing the last line of a prompt with - multibyte characters and invisible characters whose printable length - exceeds the screen width with the last invisible character - (prompt_last_invisible) in the last line. IN_INVISLINE is the - offset of DATA in invisible_line */ - in_invisline = 0; - if (data > invisible_line && data < invisible_line+inv_lbreaks[_rl_inv_botlin+1]) - in_invisline = data - invisible_line; - - /* Use NEW when comparing against the last invisible character in the - prompt string, since they're both buffer indices and DPOS is a - desired display position. */ - /* NEW is relative to the current displayed line, while - PROMPT_LAST_INVISIBLE is relative to the entire (wrapped) line. - Need a way to reconcile these two variables by turning NEW into a - buffer position relative to the start of the line */ - if (adjust && ((new > prompt_last_invisible) || /* XXX - don't use woff here */ - (new+in_invisline > prompt_last_invisible) || /* invisible line */ - (prompt_physical_chars >= _rl_screenwidth && /* visible line */ - _rl_last_v_pos == prompt_last_screen_line && - wrap_offset >= woff && dpos >= woff && - new > (prompt_last_invisible-(vis_lbreaks[_rl_last_v_pos])-wrap_offset)))) - /* XXX last comparison might need to be >= */ - { - dpos -= woff; - /* Since this will be assigned to _rl_last_c_pos at the end (more - precisely, _rl_last_c_pos == dpos when this function returns), - let the caller know. */ - cpos_adjusted = 1; - } - } - else -#endif - dpos = new; - - /* If we don't have to do anything, then return. */ - if (cpos == dpos) - return; - - /* It may be faster to output a CR, and then move forwards instead - of moving backwards. */ - /* i == current physical cursor position. */ -#if defined (HANDLE_MULTIBYTE) - if (mb_cur_max > 1 && rl_byte_oriented == 0) - i = _rl_last_c_pos; - else -#endif - i = _rl_last_c_pos - woff; - if (dpos == 0 || CR_FASTER (dpos, _rl_last_c_pos) || - (_rl_term_autowrap && i == _rl_screenwidth)) - { -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif /* !__MSDOS__ */ - cpos = _rl_last_c_pos = 0; - } - - if (cpos < dpos) - { - /* Move the cursor forward. We do it by printing the command - to move the cursor forward if there is one, else print that - portion of the output buffer again. Which is cheaper? */ - - /* The above comment is left here for posterity. It is faster - to print one character (non-control) than to print a control - sequence telling the terminal to move forward one character. - That kind of control is for people who don't know what the - data is underneath the cursor. */ - - /* However, we need a handle on where the current display position is - in the buffer for the immediately preceding comment to be true. - In multibyte locales, we don't currently have that info available. - Without it, we don't know where the data we have to display begins - in the buffer and we have to go back to the beginning of the screen - line. In this case, we can use the terminal sequence to move forward - if it's available. */ - if (mb_cur_max > 1 && rl_byte_oriented == 0) - { - if (_rl_term_forward_char) - { - for (i = cpos; i < dpos; i++) - tputs (_rl_term_forward_char, 1, _rl_output_character_function); - } - else - { - tputs (_rl_term_cr, 1, _rl_output_character_function); - for (i = 0; i < new; i++) - putc (data[i], rl_outstream); - } - } - else - for (i = cpos; i < new; i++) - putc (data[i], rl_outstream); - } - -#if defined (HANDLE_MULTIBYTE) - /* NEW points to the buffer point, but _rl_last_c_pos is the display point. - The byte length of the string is probably bigger than the column width - of the string, which means that if NEW == _rl_last_c_pos, then NEW's - display point is less than _rl_last_c_pos. */ -#endif - else if (cpos > dpos) - _rl_backspace (cpos - dpos); - - _rl_last_c_pos = dpos; -} - -/* PWP: move the cursor up or down. */ -void -_rl_move_vert (int to) -{ - register int delta, i; - - if (_rl_last_v_pos == to || to > _rl_screenheight) - return; - - if ((delta = to - _rl_last_v_pos) > 0) - { - for (i = 0; i < delta; i++) - putc ('\n', rl_outstream); -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - _rl_last_c_pos = 0; - } - else - { /* delta < 0 */ -#ifdef __DJGPP__ - int row, col; - - fflush (rl_outstream); - ScreenGetCursor (&row, &col); - ScreenSetCursor (row + delta, col); - i = -delta; -#else - if (_rl_term_up && *_rl_term_up) - for (i = 0; i < -delta; i++) - tputs (_rl_term_up, 1, _rl_output_character_function); -#endif /* !__DJGPP__ */ - } - - _rl_last_v_pos = to; /* Now TO is here */ -} - -/* Physically print C on rl_outstream. This is for functions which know - how to optimize the display. Return the number of characters output. */ -int -rl_show_char (int c) -{ - int n = 1; - if (META_CHAR (c) && (_rl_output_meta_chars == 0)) - { - fprintf (rl_outstream, "M-"); - n += 2; - c = UNMETA (c); - } - -#if defined (DISPLAY_TABS) - if ((CTRL_CHAR (c) && c != '\t') || c == RUBOUT) -#else - if (CTRL_CHAR (c) || c == RUBOUT) -#endif /* !DISPLAY_TABS */ - { - fprintf (rl_outstream, "C-"); - n += 2; - c = CTRL_CHAR (c) ? UNCTRL (c) : '?'; - } - - putc (c, rl_outstream); - fflush (rl_outstream); - return n; -} - -int -rl_character_len (int c, int pos) -{ - unsigned char uc; - - uc = (unsigned char)c; - - if (META_CHAR (uc)) - return ((_rl_output_meta_chars == 0) ? 4 : 1); - - if (uc == '\t') - { -#if defined (DISPLAY_TABS) - return (((pos | 7) + 1) - pos); -#else - return (2); -#endif /* !DISPLAY_TABS */ - } - - if (CTRL_CHAR (c) || c == RUBOUT) - return (2); - - return ((ISPRINT (uc)) ? 1 : 2); -} -/* How to print things in the "echo-area". The prompt is treated as a - mini-modeline. */ -static int msg_saved_prompt = 0; - -#if defined (USE_VARARGS) -int -#if defined (PREFER_STDARG) -rl_message (const char *format, ...) -#else -rl_message (va_alist) - va_dcl -#endif -{ - va_list args; -#if defined (PREFER_VARARGS) - char *format; -#endif -#if defined (HAVE_VSNPRINTF) - int bneed; -#endif - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - - if (msg_buf == 0) - msg_buf = xmalloc (msg_bufsiz = 128); - -#if defined (HAVE_VSNPRINTF) - bneed = vsnprintf (msg_buf, msg_bufsiz, format, args); - if (bneed >= msg_bufsiz - 1) - { - msg_bufsiz = bneed + 1; - msg_buf = xrealloc (msg_buf, msg_bufsiz); - va_end (args); - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - vsnprintf (msg_buf, msg_bufsiz - 1, format, args); - } -#else - vsprintf (msg_buf, format, args); - msg_buf[msg_bufsiz - 1] = '\0'; /* overflow? */ -#endif - va_end (args); - - if (saved_local_prompt == 0) - { - rl_save_prompt (); - msg_saved_prompt = 1; - } - else if (local_prompt != saved_local_prompt) - { - FREE (local_prompt); - FREE (local_prompt_prefix); - local_prompt = (char *)NULL; - } - rl_display_prompt = msg_buf; - local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length, - &prompt_last_invisible, - &prompt_invis_chars_first_line, - &prompt_physical_chars); - local_prompt_prefix = (char *)NULL; - local_prompt_len = local_prompt ? strlen (local_prompt) : 0; - (*rl_redisplay_function) (); - - return 0; -} -#else /* !USE_VARARGS */ -int -rl_message (format, arg1, arg2) - char *format; -{ - if (msg_buf == 0) - msg_buf = xmalloc (msg_bufsiz = 128); - - sprintf (msg_buf, format, arg1, arg2); - msg_buf[msg_bufsiz - 1] = '\0'; /* overflow? */ - - rl_display_prompt = msg_buf; - if (saved_local_prompt == 0) - { - rl_save_prompt (); - msg_saved_prompt = 1; - } - else if (local_prompt != saved_local_prompt) - { - FREE (local_prompt); - FREE (local_prompt_prefix); - local_prompt = (char *)NULL; - } - local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length, - &prompt_last_invisible, - &prompt_invis_chars_first_line, - &prompt_physical_chars); - local_prompt_prefix = (char *)NULL; - local_prompt_len = local_prompt ? strlen (local_prompt) : 0; - (*rl_redisplay_function) (); - - return 0; -} -#endif /* !USE_VARARGS */ - -/* How to clear things from the "echo-area". */ -int -rl_clear_message (void) -{ - rl_display_prompt = rl_prompt; - if (msg_saved_prompt) - { - rl_restore_prompt (); - msg_saved_prompt = 0; - } - (*rl_redisplay_function) (); - return 0; -} - -int -rl_reset_line_state (void) -{ - rl_on_new_line (); - - rl_display_prompt = rl_prompt ? rl_prompt : ""; - forced_display = 1; - return 0; -} - -/* Save all of the variables associated with the prompt and its display. Most - of the complexity is dealing with the invisible characters in the prompt - string and where they are. There are enough of these that I should consider - a struct. */ -void -rl_save_prompt (void) -{ - saved_local_prompt = local_prompt; - saved_local_prefix = local_prompt_prefix; - saved_prefix_length = prompt_prefix_length; - saved_local_length = local_prompt_len; - saved_last_invisible = prompt_last_invisible; - saved_visible_length = prompt_visible_length; - saved_invis_chars_first_line = prompt_invis_chars_first_line; - saved_physical_chars = prompt_physical_chars; - saved_local_prompt_newlines = local_prompt_newlines; - - local_prompt = local_prompt_prefix = (char *)0; - local_prompt_len = 0; - local_prompt_newlines = (int *)0; - - prompt_last_invisible = prompt_visible_length = prompt_prefix_length = 0; - prompt_invis_chars_first_line = prompt_physical_chars = 0; -} - -void -rl_restore_prompt (void) -{ - FREE (local_prompt); - FREE (local_prompt_prefix); - FREE (local_prompt_newlines); - - local_prompt = saved_local_prompt; - local_prompt_prefix = saved_local_prefix; - local_prompt_len = saved_local_length; - local_prompt_newlines = saved_local_prompt_newlines; - - prompt_prefix_length = saved_prefix_length; - prompt_last_invisible = saved_last_invisible; - prompt_visible_length = saved_visible_length; - prompt_invis_chars_first_line = saved_invis_chars_first_line; - prompt_physical_chars = saved_physical_chars; - - /* can test saved_local_prompt to see if prompt info has been saved. */ - saved_local_prompt = saved_local_prefix = (char *)0; - saved_local_length = 0; - saved_last_invisible = saved_visible_length = saved_prefix_length = 0; - saved_invis_chars_first_line = saved_physical_chars = 0; - saved_local_prompt_newlines = 0; -} - -char * -_rl_make_prompt_for_search (int pchar) -{ - int len; - char *pmt, *p; - - rl_save_prompt (); - - /* We've saved the prompt, and can do anything with the various prompt - strings we need before they're restored. We want the unexpanded - portion of the prompt string after any final newline. */ - p = rl_prompt ? strrchr (rl_prompt, '\n') : 0; - if (p == 0) - { - len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0; - pmt = (char *)xmalloc (len + 2); - if (len) - strcpy (pmt, rl_prompt); - pmt[len] = pchar; - pmt[len+1] = '\0'; - } - else - { - p++; - len = strlen (p); - pmt = (char *)xmalloc (len + 2); - if (len) - strcpy (pmt, p); - pmt[len] = pchar; - pmt[len+1] = '\0'; - } - - /* will be overwritten by expand_prompt, called from rl_message */ - prompt_physical_chars = saved_physical_chars + 1; - return pmt; -} - -/* Quick redisplay hack when erasing characters at the end of the line. */ -void -_rl_erase_at_end_of_line (int l) -{ - register int i; - - _rl_backspace (l); - for (i = 0; i < l; i++) - putc (' ', rl_outstream); - _rl_backspace (l); - for (i = 0; i < l; i++) - visible_line[--_rl_last_c_pos] = '\0'; - rl_display_fixed++; -} - -/* Clear to the end of the line. COUNT is the minimum - number of character spaces to clear, but we use a terminal escape - sequence if available. */ -void -_rl_clear_to_eol (int count) -{ -#ifndef __MSDOS__ - if (_rl_term_clreol) - tputs (_rl_term_clreol, 1, _rl_output_character_function); - else -#endif - if (count) - space_to_eol (count); -} - -/* Clear to the end of the line using spaces. COUNT is the minimum - number of character spaces to clear, */ -static void -space_to_eol (int count) -{ - register int i; - - for (i = 0; i < count; i++) - putc (' ', rl_outstream); - - _rl_last_c_pos += count; -} - -void -_rl_clear_screen (void) -{ -#if defined (__DJGPP__) - ScreenClear (); - ScreenSetCursor (0, 0); -#else - if (_rl_term_clrpag) - tputs (_rl_term_clrpag, 1, _rl_output_character_function); - else - rl_crlf (); -#endif /* __DJGPP__ */ -} - -/* Insert COUNT characters from STRING to the output stream at column COL. */ -static void -insert_some_chars (char *string, int count, int col) -{ - open_some_spaces (col); - _rl_output_some_chars (string, count); -} - -/* Insert COL spaces, keeping the cursor at the same position. We follow the - ncurses documentation and use either im/ei with explicit spaces, or IC/ic - by itself. We assume there will either be ei or we don't need to use it. */ -static void -open_some_spaces (int col) -{ -#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION)) - char *buffer; - register int i; - - /* If IC is defined, then we do not have to "enter" insert mode. */ - if (_rl_term_IC) - { - buffer = tgoto (_rl_term_IC, 0, col); - tputs (buffer, 1, _rl_output_character_function); - } - else if (_rl_term_im && *_rl_term_im) - { - tputs (_rl_term_im, 1, _rl_output_character_function); - /* just output the desired number of spaces */ - for (i = col; i--; ) - _rl_output_character_function (' '); - /* If there is a string to turn off insert mode, use it now. */ - if (_rl_term_ei && *_rl_term_ei) - tputs (_rl_term_ei, 1, _rl_output_character_function); - /* and move back the right number of spaces */ - _rl_backspace (col); - } - else if (_rl_term_ic && *_rl_term_ic) - { - /* If there is a special command for inserting characters, then - use that first to open up the space. */ - for (i = col; i--; ) - tputs (_rl_term_ic, 1, _rl_output_character_function); - } -#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/ -} - -/* Delete COUNT characters from the display line. */ -static void -delete_chars (int count) -{ - if (count > _rl_screenwidth) /* XXX */ - return; - -#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION)) - if (_rl_term_DC && *_rl_term_DC) - { - char *buffer; - buffer = tgoto (_rl_term_DC, count, count); - tputs (buffer, count, _rl_output_character_function); - } - else - { - if (_rl_term_dc && *_rl_term_dc) - while (count--) - tputs (_rl_term_dc, 1, _rl_output_character_function); - } -#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/ -} - -void -_rl_update_final (void) -{ - int full_lines, woff, botline_length; - - full_lines = 0; - /* If the cursor is the only thing on an otherwise-blank last line, - compensate so we don't print an extra CRLF. */ - if (_rl_vis_botlin && _rl_last_c_pos == 0 && - visible_line[vis_lbreaks[_rl_vis_botlin]] == 0) - { - _rl_vis_botlin--; - full_lines = 1; - } - _rl_move_vert (_rl_vis_botlin); - woff = W_OFFSET(_rl_vis_botlin, wrap_offset); - botline_length = VIS_LLEN(_rl_vis_botlin) - woff; - /* If we've wrapped lines, remove the final xterm line-wrap flag. */ - if (full_lines && _rl_term_autowrap && botline_length == _rl_screenwidth) - { - char *last_line; - - /* LAST_LINE includes invisible characters, so if you want to get the - last character of the first line, you have to take WOFF into account. - This needs to be done for both calls to _rl_move_cursor_relative, - which takes a buffer position as the first argument, and any direct - subscripts of LAST_LINE. */ - last_line = &visible_line[vis_lbreaks[_rl_vis_botlin]]; /* = VIS_CHARS(_rl_vis_botlin); */ - cpos_buffer_position = -1; /* don't know where we are in buffer */ - _rl_move_cursor_relative (_rl_screenwidth - 1 + woff, last_line); /* XXX */ - _rl_clear_to_eol (0); - putc (last_line[_rl_screenwidth - 1 + woff], rl_outstream); - } - _rl_vis_botlin = 0; - if (botline_length > 0 || _rl_last_c_pos > 0) - rl_crlf (); - fflush (rl_outstream); - rl_display_fixed++; -} - -/* Move to the start of the current line. */ -static void -cr (void) -{ - if (_rl_term_cr) - { -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - _rl_last_c_pos = 0; - } -} - -/* Redraw the last line of a multi-line prompt that may possibly contain - terminal escape sequences. Called with the cursor at column 0 of the - line to draw the prompt on. */ -static void -redraw_prompt (char *t) -{ - char *oldp; - - oldp = rl_display_prompt; - rl_save_prompt (); - - rl_display_prompt = t; - local_prompt = expand_prompt (t, PMT_MULTILINE, - &prompt_visible_length, - &prompt_last_invisible, - &prompt_invis_chars_first_line, - &prompt_physical_chars); - local_prompt_prefix = (char *)NULL; - local_prompt_len = local_prompt ? strlen (local_prompt) : 0; - - rl_forced_update_display (); - - rl_display_prompt = oldp; - rl_restore_prompt(); -} - -/* Redisplay the current line after a SIGWINCH is received. */ -void -_rl_redisplay_after_sigwinch (void) -{ - char *t; - - /* Clear the last line (assuming that the screen size change will result in - either more or fewer characters on that line only) and put the cursor at - column 0. Make sure the right thing happens if we have wrapped to a new - screen line. */ - if (_rl_term_cr) - { - _rl_move_vert (_rl_vis_botlin); - -#if defined (__MSDOS__) - putc ('\r', rl_outstream); -#else - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif - _rl_last_c_pos = 0; -#if defined (__MSDOS__) - space_to_eol (_rl_screenwidth); - putc ('\r', rl_outstream); -#else - if (_rl_term_clreol) - tputs (_rl_term_clreol, 1, _rl_output_character_function); - else - { - space_to_eol (_rl_screenwidth); - tputs (_rl_term_cr, 1, _rl_output_character_function); - } -#endif - if (_rl_last_v_pos > 0) - _rl_move_vert (0); - } - else - rl_crlf (); - - /* Redraw only the last line of a multi-line prompt. */ - t = strrchr (rl_display_prompt, '\n'); - if (t) - redraw_prompt (++t); - else - rl_forced_update_display (); -} - -void -_rl_clean_up_for_exit (void) -{ - if (_rl_echoing_p) - { - if (_rl_vis_botlin > 0) /* minor optimization plus bug fix */ - _rl_move_vert (_rl_vis_botlin); - _rl_vis_botlin = 0; - fflush (rl_outstream); - rl_restart_output (1, 0); - } -} - -void -_rl_erase_entire_line (void) -{ - cr (); - _rl_clear_to_eol (0); - cr (); - fflush (rl_outstream); -} - -void -_rl_ttyflush (void) -{ - fflush (rl_outstream); -} - -/* return the `current display line' of the cursor -- the number of lines to - move up to get to the first screen line of the current readline line. */ -int -_rl_current_display_line (void) -{ - int ret, nleft; - - /* Find out whether or not there might be invisible characters in the - editing buffer. */ - if (rl_display_prompt == rl_prompt) - nleft = _rl_last_c_pos - _rl_screenwidth - rl_visible_prompt_length; - else - nleft = _rl_last_c_pos - _rl_screenwidth; - - if (nleft > 0) - ret = 1 + nleft / _rl_screenwidth; - else - ret = 0; - - return ret; -} - -#if defined (HANDLE_MULTIBYTE) -/* Calculate the number of screen columns occupied by STR from START to END. - In the case of multibyte characters with stateful encoding, we have to - scan from the beginning of the string to take the state into account. */ -static int -_rl_col_width (const char *str, int start, int end, int flags) -{ - wchar_t wc; - mbstate_t ps; - int tmp, point, width, max; - - if (end <= start) - return 0; - if (MB_CUR_MAX == 1 || rl_byte_oriented) - /* this can happen in some cases where it's inconvenient to check */ - return (end - start); - - memset (&ps, 0, sizeof (mbstate_t)); - - point = 0; - max = end; - - /* Try to short-circuit common cases. The adjustment to remove wrap_offset - is done by the caller. */ - /* 1. prompt string */ - if (flags && start == 0 && end == local_prompt_len && memcmp (str, local_prompt, local_prompt_len) == 0) - return (prompt_physical_chars + wrap_offset); - /* 2. prompt string + line contents */ - else if (flags && start == 0 && local_prompt_len > 0 && end > local_prompt_len && local_prompt && memcmp (str, local_prompt, local_prompt_len) == 0) - { - tmp = prompt_physical_chars + wrap_offset; - /* XXX - try to call ourselves recursively with non-prompt portion */ - tmp += _rl_col_width (str, local_prompt_len, end, flags); - return (tmp); - } - - while (point < start) - { - if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point])) - { - memset (&ps, 0, sizeof (mbstate_t)); - tmp = 1; - } - else - tmp = mbrlen (str + point, max, &ps); - if (MB_INVALIDCH ((size_t)tmp)) - { - /* In this case, the bytes are invalid or too short to compose a - multibyte character, so we assume that the first byte represents - a single character. */ - point++; - max--; - - /* Clear the state of the byte sequence, because in this case the - effect of mbstate is undefined. */ - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (tmp)) - break; /* Found '\0' */ - else - { - point += tmp; - max -= tmp; - } - } - - /* If START is not a byte that starts a character, then POINT will be - greater than START. In this case, assume that (POINT - START) gives - a byte count that is the number of columns of difference. */ - width = point - start; - - while (point < end) - { - if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point])) - { - tmp = 1; - wc = (wchar_t) str[point]; - } - else - tmp = mbrtowc (&wc, str + point, max, &ps); - if (MB_INVALIDCH ((size_t)tmp)) - { - /* In this case, the bytes are invalid or too short to compose a - multibyte character, so we assume that the first byte represents - a single character. */ - point++; - max--; - - /* and assume that the byte occupies a single column. */ - width++; - - /* Clear the state of the byte sequence, because in this case the - effect of mbstate is undefined. */ - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (tmp)) - break; /* Found '\0' */ - else - { - point += tmp; - max -= tmp; - tmp = WCWIDTH(wc); - width += (tmp >= 0) ? tmp : 1; - } - } - - width += point - end; - - return width; -} -#endif /* HANDLE_MULTIBYTE */ diff --git a/readline/doc/ChangeLog.gdb b/readline/doc/ChangeLog.gdb deleted file mode 100644 index 5830e1ba01..0000000000 --- a/readline/doc/ChangeLog.gdb +++ /dev/null @@ -1,94 +0,0 @@ -2011-05-11 Jan Kratochvil - - * hsuser.texi (Using History Interactively): Disable !BashFeatures - @defcodeindex. Make the `Programming with GNU History' reference - external. - * inc-hist.texinfo: Remove. - -2011-05-11 Jan Kratochvil - - Imported readline 6.2, and upstream patch 001. - -2006-04-24 Daniel Jacobowitz - - Imported readline 5.1, and upstream patches 001-004. - -2003-09-14 Andrew Cagney - - * history.0: Delete generated file. - -2002-02-24 Elena Zannoni - - * ChangeLog.gdb: Renamed from ChangeLog. - -2002-01-20 Eli Zaretskii - - * rluser.texinfo (Sample Init File): Prevent overfull hboxes. - From Brian Youmans <3diff@gnu.org>. - -2000-07-09 Elena Zannoni - - * Removed generated files rluserman.{dvi, info, html, ps}. - -2000-07-07 Elena Zannoni - - * Import of readline 4.1. - - Regenerated inc-hist.texinfo as copy of hsuser.texinfo, for - inclusion in the gdb manual. - - New file: rluserman.texinfo - -Tue Apr 18 15:43:52 2000 Andrew Cagney - - * readline.0: Delete. Generated by Makefile, deleted by distclean - rule. - -Tue Mar 28 16:06:22 2000 Andrew Cagney - - * inc-hist.texinfo, rluser.texinfo: Revert change Fri Mar 24 - 18:04:32 2000 Andrew Cagney . - Unconditionally provide @chapter and @node. - -Fri Mar 24 18:04:32 2000 Andrew Cagney - - * inc-hist.texinfo: When GDBN omit the chapter/node. - * rluser.texinfo (Command Line Editing): Ditto. - -1999-08-10 Elena Zannoni - - * hsuser.texinfo (Bash History Builtins): Comment out btindex - commands. - - * inc-hist.texinfo: New file. Same as hsuser.texinfo, but w/o - cross reference to GNU History Manual. - -Tue Dec 22 10:07:58 1998 Elena Zannoni - - * hsuser.texinfo (Bash History Builtins): comment out btindex - commands. - - * Import of Readline 2.2.1. - - New files: readline.0, readline.3, texi2dvi, texi2html. - -1998-12-17 Felix Lee - - * inc-hist.texi: @node line "Using History" was wrong. - -Thu Jul 9 17:03:26 1998 Edith Epstein - - * inc-hist.texi: one line change. - -Wed Sep 20 12:57:29 1995 Ian Lance Taylor - - * Makefile.in (maintainer-clean): New synonym for realclean. - -Tue Feb 2 11:40:04 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) - - * Makefile.in: configurable (and useable) Makefile template - * Makefile: removed, replaced with configurable Makefile.in - * texindex.c texinfo.tex: remove, replacing w/refs to tools - elsewhere in distribution tree - * configure.in: pro forma configure stub - * ChangeLog: new file diff --git a/readline/doc/Makefile.in b/readline/doc/Makefile.in deleted file mode 100644 index a38bc9eb4a..0000000000 --- a/readline/doc/Makefile.in +++ /dev/null @@ -1,271 +0,0 @@ -# This makefile for Readline library documentation is in -*- text -*- mode. -# Emacs likes it that way. - -# Copyright (C) 1996-2009 Free Software Foundation, Inc. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -PACKAGE_TARNAME = @PACKAGE_TARNAME@ - -topdir = @top_srcdir@ -srcdir = @srcdir@ -VPATH = @srcdir@ - -prefix = @prefix@ - -datarootdir = @datarootdir@ - -docdir = @docdir@ -infodir = @infodir@ - -mandir = @mandir@ -manpfx = man - -man1ext = .1 -man1dir = $(mandir)/$(manpfx)1 -man3ext = .3 -man3dir = $(mandir)/$(manpfx)3 - -# set this to a value to have the HTML documentation installed -htmldir = - -# Support an alternate destination root directory for package building -DESTDIR = - -SHELL = @MAKE_SHELL@ -RM = rm -f - -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ - -BUILD_DIR = @BUILD_DIR@ -TEXINPUTDIR = $(srcdir) - -MAKEINFO = LANGUAGE= makeinfo -TEXI2DVI = $(srcdir)/texi2dvi -TEXI2HTML = $(srcdir)/texi2html -QUIETPS = #set this to -q to shut up dvips -PAPERSIZE = letter -PSDPI = 600 -DVIPS = dvips -D ${PSDPI} $(QUIETPS) -t ${PAPERSIZE} -o $@ # tricky -# experimental; uses external texi2dvi for now; this needs pdftex to be present -TEXI2PDF = texi2dvi --pdf - -# These tools might not be available; they're not required -DVIPDF = dvipdfm -o $@ -p ${PAPERSIZE} -PSPDF = gs -sPAPERSIZE=${PAPERSIZE} -sDEVICE=pdfwrite -dNOPAUSE -dBATCH -sOutputFile=$@ - -RLSRC = $(srcdir)/rlman.texi $(srcdir)/rluser.texi \ - $(srcdir)/rltech.texi $(srcdir)/version.texi \ - $(srcdir)/rluserman.texi $(srcdir)/fdl.texi -HISTSRC = $(srcdir)/history.texi $(srcdir)/hsuser.texi \ - $(srcdir)/hstech.texi $(srcdir)/version.texi $(srcdir)/fdl.texi - -# This should be a program that converts troff to an ascii-readable format -NROFF = groff -Tascii - -# This should be a program that converts troff to postscript -GROFF = groff - -DVIOBJ = readline.dvi history.dvi rluserman.dvi -INFOOBJ = readline.info history.info rluserman.info -PSOBJ = readline.ps history.ps rluserman.ps readline_3.ps history_3.ps -HTMLOBJ = readline.html history.html rluserman.html -TEXTOBJ = readline.0 history.0 -PDFOBJ = readline.pdf history.pdf rluserman.pdf - -INTERMEDIATE_OBJ = rlman.dvi - -DIST_DOCS = $(DVIOBJ) $(PSOBJ) $(HTMLOBJ) $(INFOOBJ) $(TEXTOBJ) $(PDFOBJ) - -.SUFFIXES: .0 .3 .ps .txt .dvi .html .pdf - -.3.0: - $(RM) $@ - -${NROFF} -man $< > $@ - -.ps.pdf: - $(RM) $@ - -${PSPDF} $< - -.dvi.pdf: - $(RM) $@ - -${DVIPDF} $< - -#.texi.pdf: -# $(RM) $@ -# -${TEXI2PDF} $< - -all: info dvi html ps text pdf -nodvi: info html text - -xdist: $(DIST_DOCS) - -info: $(INFOOBJ) -dvi: $(DVIOBJ) -ps: $(PSOBJ) -html: $(HTMLOBJ) -text: $(TEXTOBJ) -pdf: $(PDFOBJ) - -readline.dvi: $(RLSRC) - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rlman.texi - mv rlman.dvi readline.dvi - -readline.info: $(RLSRC) - $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rlman.texi - -rluserman.dvi: $(RLSRC) - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rluserman.texi - -rluserman.info: $(RLSRC) - $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rluserman.texi - -history.dvi: ${HISTSRC} - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/history.texi - -history.info: ${HISTSRC} - $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/history.texi - -readline.ps: readline.dvi - $(RM) $@ - $(DVIPS) readline.dvi - -rluserman.ps: rluserman.dvi - $(RM) $@ - $(DVIPS) rluserman.dvi - -history.ps: history.dvi - $(RM) $@ - $(DVIPS) history.dvi - -# -# This leaves readline.html and rlman.html -- rlman.html is for www.gnu.org -# -readline.html: ${RLSRC} - $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rlman.texi - sed -e 's:rlman.html:readline.html:g' rlman.html > readline.html - $(RM) rlman.html - -rluserman.html: ${RLSRC} - $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rluserman.texi - -history.html: ${HISTSRC} - $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/history.texi - -readline.0: readline.3 - -readline_3.ps: $(srcdir)/readline.3 - ${RM} $@ - ${GROFF} -man < $(srcdir)/readline.3 > $@ - -history.0: history.3 - -history_3.ps: $(srcdir)/history.3 - ${RM} $@ - ${GROFF} -man < $(srcdir)/history.3 > $@ - -readline.pdf: $(RLSRC) - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/rlman.texi - mv rlman.pdf $@ - -history.pdf: $(HISTSRC) - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/history.texi - -rluserman.pdf: $(RLSRC) - TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/rluserman.texi - -clean: - $(RM) *.aux *.bak *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps \ - *.pgs *.bt *.bts *.rw *.rws *.fns *.kys *.tps *.vrs *.o \ - core *.core - -mostlyclean: clean - -distclean: clean maybe-clean - $(RM) $(INTERMEDIATE_OBJ) - $(RM) Makefile - -maybe-clean: - -if test "X$(topdir)" != "X.." && test "X$(topdir)" != "X$(BUILD_DIR)"; then \ - $(RM) $(DIST_DOCS); \ - fi - -maintainer-clean: clean - $(RM) $(DIST_DOCS) - $(RM) $(INTERMEDIATE_OBJ) - $(RM) $(PDFOBJ) - $(RM) Makefile - -installdirs: $(topdir)/support/mkdirs - -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(infodir) $(DESTDIR)$(man3dir) - -if test -n "${htmldir}" ; then \ - $(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(htmldir) ; \ - fi - -install: installdirs - if test -f readline.info; then \ - ${INSTALL_DATA} readline.info $(DESTDIR)$(infodir)/readline.info; \ - else \ - ${INSTALL_DATA} $(srcdir)/readline.info $(DESTDIR)$(infodir)/readline.info; \ - fi - if test -f rluserman.info; then \ - ${INSTALL_DATA} rluserman.info $(DESTDIR)$(infodir)/rluserman.info; \ - else \ - ${INSTALL_DATA} $(srcdir)/rluserman.info $(DESTDIR)$(infodir)/rluserman.info; \ - fi - if test -f history.info; then \ - ${INSTALL_DATA} history.info $(DESTDIR)$(infodir)/history.info; \ - else \ - ${INSTALL_DATA} $(srcdir)/history.info $(DESTDIR)$(infodir)/history.info; \ - fi - -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ - install-info --dir-file=$(DESTDIR)$(infodir)/dir \ - $(DESTDIR)$(infodir)/readline.info ; \ - install-info --dir-file=$(DESTDIR)$(infodir)/dir \ - $(DESTDIR)$(infodir)/history.info ; \ - install-info --dir-file=$(DESTDIR)$(infodir)/dir \ - $(DESTDIR)$(infodir)/rluserman.info ; \ - else true; fi - -${INSTALL_DATA} $(srcdir)/readline.3 $(DESTDIR)$(man3dir)/readline$(man3ext) - -${INSTALL_DATA} $(srcdir)/history.3 $(DESTDIR)$(man3dir)/history$(man3ext) - -if test -n "${htmldir}" ; then \ - if test -f readline.html; then \ - ${INSTALL_DATA} readline.html $(DESTDIR)$(htmldir)/readline.html; \ - else \ - ${INSTALL_DATA} $(srcdir)/readline.html $(DESTDIR)$(htmldir)/readline.html; \ - fi ; \ - if test -f history.html; then \ - ${INSTALL_DATA} history.html $(DESTDIR)$(htmldir)/history.html; \ - else \ - ${INSTALL_DATA} $(srcdir)/history.html $(DESTDIR)$(htmldir)/history.html; \ - fi ; \ - if test -f rluserman.html; then \ - ${INSTALL_DATA} rluserman.html $(DESTDIR)$(htmldir)/rluserman.html; \ - else \ - ${INSTALL_DATA} $(srcdir)/rluserman.html $(DESTDIR)$(htmldir)/rluserman.html; \ - fi ; \ - fi - -uninstall: - $(RM) $(DESTDIR)$(infodir)/readline.info - $(RM) $(DESTDIR)$(infodir)/rluserman.info - $(RM) $(DESTDIR)$(infodir)/history.info - $(RM) $(DESTDIR)$(man3dir)/readline$(man3ext) - $(RM) $(DESTDIR)$(man3dir)/history$(man3ext) - -if test -n "${htmldir}" ; then \ - $(RM) $(DESTDIR)$(htmldir)/readline.html ; \ - $(RM) $(DESTDIR)$(htmldir)/rluserman.html ; \ - $(RM) $(DESTDIR)$(htmldir)/history.html ; \ - fi diff --git a/readline/doc/fdl.texi b/readline/doc/fdl.texi deleted file mode 100644 index 8805f1a47d..0000000000 --- a/readline/doc/fdl.texi +++ /dev/null @@ -1,506 +0,0 @@ -@c The GNU Free Documentation License. -@center Version 1.3, 3 November 2008 - -@c This file is intended to be included within another document, -@c hence no sectioning command or @node. - -@display -Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. -@uref{http://fsf.org/} - -Everyone is permitted to copy and distribute verbatim copies -of this license document, but changing it is not allowed. -@end display - -@enumerate 0 -@item -PREAMBLE - -The purpose of this License is to make a manual, textbook, or other -functional and useful document @dfn{free} in the sense of freedom: to -assure everyone the effective freedom to copy and redistribute it, -with or without modifying it, either commercially or noncommercially. -Secondarily, this License preserves for the author and publisher a way -to get credit for their work, while not being considered responsible -for modifications made by others. - -This License is a kind of ``copyleft'', which means that derivative -works of the document must themselves be free in the same sense. It -complements the GNU General Public License, which is a copyleft -license designed for free software. - -We have designed this License in order to use it for manuals for free -software, because free software needs free documentation: a free -program should come with manuals providing the same freedoms that the -software does. But this License is not limited to software manuals; -it can be used for any textual work, regardless of subject matter or -whether it is published as a printed book. We recommend this License -principally for works whose purpose is instruction or reference. - -@item -APPLICABILITY AND DEFINITIONS - -This License applies to any manual or other work, in any medium, that -contains a notice placed by the copyright holder saying it can be -distributed under the terms of this License. Such a notice grants a -world-wide, royalty-free license, unlimited in duration, to use that -work under the conditions stated herein. The ``Document'', below, -refers to any such manual or work. Any member of the public is a -licensee, and is addressed as ``you''. You accept the license if you -copy, modify or distribute the work in a way requiring permission -under copyright law. - -A ``Modified Version'' of the Document means any work containing the -Document or a portion of it, either copied verbatim, or with -modifications and/or translated into another language. - -A ``Secondary Section'' is a named appendix or a front-matter section -of the Document that deals exclusively with the relationship of the -publishers or authors of the Document to the Document's overall -subject (or to related matters) and contains nothing that could fall -directly within that overall subject. (Thus, if the Document is in -part a textbook of mathematics, a Secondary Section may not explain -any mathematics.) The relationship could be a matter of historical -connection with the subject or with related matters, or of legal, -commercial, philosophical, ethical or political position regarding -them. - -The ``Invariant Sections'' are certain Secondary Sections whose titles -are designated, as being those of Invariant Sections, in the notice -that says that the Document is released under this License. If a -section does not fit the above definition of Secondary then it is not -allowed to be designated as Invariant. The Document may contain zero -Invariant Sections. If the Document does not identify any Invariant -Sections then there are none. - -The ``Cover Texts'' are certain short passages of text that are listed, -as Front-Cover Texts or Back-Cover Texts, in the notice that says that -the Document is released under this License. A Front-Cover Text may -be at most 5 words, and a Back-Cover Text may be at most 25 words. - -A ``Transparent'' copy of the Document means a machine-readable copy, -represented in a format whose specification is available to the -general public, that is suitable for revising the document -straightforwardly with generic text editors or (for images composed of -pixels) generic paint programs or (for drawings) some widely available -drawing editor, and that is suitable for input to text formatters or -for automatic translation to a variety of formats suitable for input -to text formatters. A copy made in an otherwise Transparent file -format whose markup, or absence of markup, has been arranged to thwart -or discourage subsequent modification by readers is not Transparent. -An image format is not Transparent if used for any substantial amount -of text. A copy that is not ``Transparent'' is called ``Opaque''. - -Examples of suitable formats for Transparent copies include plain -@sc{ascii} without markup, Texinfo input format, La@TeX{} input -format, @acronym{SGML} or @acronym{XML} using a publicly available -@acronym{DTD}, and standard-conforming simple @acronym{HTML}, -PostScript or @acronym{PDF} designed for human modification. Examples -of transparent image formats include @acronym{PNG}, @acronym{XCF} and -@acronym{JPG}. Opaque formats include proprietary formats that can be -read and edited only by proprietary word processors, @acronym{SGML} or -@acronym{XML} for which the @acronym{DTD} and/or processing tools are -not generally available, and the machine-generated @acronym{HTML}, -PostScript or @acronym{PDF} produced by some word processors for -output purposes only. - -The ``Title Page'' means, for a printed book, the title page itself, -plus such following pages as are needed to hold, legibly, the material -this License requires to appear in the title page. For works in -formats which do not have any title page as such, ``Title Page'' means -the text near the most prominent appearance of the work's title, -preceding the beginning of the body of the text. - -The ``publisher'' means any person or entity that distributes copies -of the Document to the public. - -A section ``Entitled XYZ'' means a named subunit of the Document whose -title either is precisely XYZ or contains XYZ in parentheses following -text that translates XYZ in another language. (Here XYZ stands for a -specific section name mentioned below, such as ``Acknowledgements'', -``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title'' -of such a section when you modify the Document means that it remains a -section ``Entitled XYZ'' according to this definition. - -The Document may include Warranty Disclaimers next to the notice which -states that this License applies to the Document. These Warranty -Disclaimers are considered to be included by reference in this -License, but only as regards disclaiming warranties: any other -implication that these Warranty Disclaimers may have is void and has -no effect on the meaning of this License. - -@item -VERBATIM COPYING - -You may copy and distribute the Document in any medium, either -commercially or noncommercially, provided that this License, the -copyright notices, and the license notice saying this License applies -to the Document are reproduced in all copies, and that you add no other -conditions whatsoever to those of this License. You may not use -technical measures to obstruct or control the reading or further -copying of the copies you make or distribute. However, you may accept -compensation in exchange for copies. If you distribute a large enough -number of copies you must also follow the conditions in section 3. - -You may also lend copies, under the same conditions stated above, and -you may publicly display copies. - -@item -COPYING IN QUANTITY - -If you publish printed copies (or copies in media that commonly have -printed covers) of the Document, numbering more than 100, and the -Document's license notice requires Cover Texts, you must enclose the -copies in covers that carry, clearly and legibly, all these Cover -Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on -the back cover. Both covers must also clearly and legibly identify -you as the publisher of these copies. The front cover must present -the full title with all words of the title equally prominent and -visible. You may add other material on the covers in addition. -Copying with changes limited to the covers, as long as they preserve -the title of the Document and satisfy these conditions, can be treated -as verbatim copying in other respects. - -If the required texts for either cover are too voluminous to fit -legibly, you should put the first ones listed (as many as fit -reasonably) on the actual cover, and continue the rest onto adjacent -pages. - -If you publish or distribute Opaque copies of the Document numbering -more than 100, you must either include a machine-readable Transparent -copy along with each Opaque copy, or state in or with each Opaque copy -a computer-network location from which the general network-using -public has access to download using public-standard network protocols -a complete Transparent copy of the Document, free of added material. -If you use the latter option, you must take reasonably prudent steps, -when you begin distribution of Opaque copies in quantity, to ensure -that this Transparent copy will remain thus accessible at the stated -location until at least one year after the last time you distribute an -Opaque copy (directly or through your agents or retailers) of that -edition to the public. - -It is requested, but not required, that you contact the authors of the -Document well before redistributing any large number of copies, to give -them a chance to provide you with an updated version of the Document. - -@item -MODIFICATIONS - -You may copy and distribute a Modified Version of the Document under -the conditions of sections 2 and 3 above, provided that you release -the Modified Version under precisely this License, with the Modified -Version filling the role of the Document, thus licensing distribution -and modification of the Modified Version to whoever possesses a copy -of it. In addition, you must do these things in the Modified Version: - -@enumerate A -@item -Use in the Title Page (and on the covers, if any) a title distinct -from that of the Document, and from those of previous versions -(which should, if there were any, be listed in the History section -of the Document). You may use the same title as a previous version -if the original publisher of that version gives permission. - -@item -List on the Title Page, as authors, one or more persons or entities -responsible for authorship of the modifications in the Modified -Version, together with at least five of the principal authors of the -Document (all of its principal authors, if it has fewer than five), -unless they release you from this requirement. - -@item -State on the Title page the name of the publisher of the -Modified Version, as the publisher. - -@item -Preserve all the copyright notices of the Document. - -@item -Add an appropriate copyright notice for your modifications -adjacent to the other copyright notices. - -@item -Include, immediately after the copyright notices, a license notice -giving the public permission to use the Modified Version under the -terms of this License, in the form shown in the Addendum below. - -@item -Preserve in that license notice the full lists of Invariant Sections -and required Cover Texts given in the Document's license notice. - -@item -Include an unaltered copy of this License. - -@item -Preserve the section Entitled ``History'', Preserve its Title, and add -to it an item stating at least the title, year, new authors, and -publisher of the Modified Version as given on the Title Page. If -there is no section Entitled ``History'' in the Document, create one -stating the title, year, authors, and publisher of the Document as -given on its Title Page, then add an item describing the Modified -Version as stated in the previous sentence. - -@item -Preserve the network location, if any, given in the Document for -public access to a Transparent copy of the Document, and likewise -the network locations given in the Document for previous versions -it was based on. These may be placed in the ``History'' section. -You may omit a network location for a work that was published at -least four years before the Document itself, or if the original -publisher of the version it refers to gives permission. - -@item -For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve -the Title of the section, and preserve in the section all the -substance and tone of each of the contributor acknowledgements and/or -dedications given therein. - -@item -Preserve all the Invariant Sections of the Document, -unaltered in their text and in their titles. Section numbers -or the equivalent are not considered part of the section titles. - -@item -Delete any section Entitled ``Endorsements''. Such a section -may not be included in the Modified Version. - -@item -Do not retitle any existing section to be Entitled ``Endorsements'' or -to conflict in title with any Invariant Section. - -@item -Preserve any Warranty Disclaimers. -@end enumerate - -If the Modified Version includes new front-matter sections or -appendices that qualify as Secondary Sections and contain no material -copied from the Document, you may at your option designate some or all -of these sections as invariant. To do this, add their titles to the -list of Invariant Sections in the Modified Version's license notice. -These titles must be distinct from any other section titles. - -You may add a section Entitled ``Endorsements'', provided it contains -nothing but endorsements of your Modified Version by various -parties---for example, statements of peer review or that the text has -been approved by an organization as the authoritative definition of a -standard. - -You may add a passage of up to five words as a Front-Cover Text, and a -passage of up to 25 words as a Back-Cover Text, to the end of the list -of Cover Texts in the Modified Version. Only one passage of -Front-Cover Text and one of Back-Cover Text may be added by (or -through arrangements made by) any one entity. If the Document already -includes a cover text for the same cover, previously added by you or -by arrangement made by the same entity you are acting on behalf of, -you may not add another; but you may replace the old one, on explicit -permission from the previous publisher that added the old one. - -The author(s) and publisher(s) of the Document do not by this License -give permission to use their names for publicity for or to assert or -imply endorsement of any Modified Version. - -@item -COMBINING DOCUMENTS - -You may combine the Document with other documents released under this -License, under the terms defined in section 4 above for modified -versions, provided that you include in the combination all of the -Invariant Sections of all of the original documents, unmodified, and -list them all as Invariant Sections of your combined work in its -license notice, and that you preserve all their Warranty Disclaimers. - -The combined work need only contain one copy of this License, and -multiple identical Invariant Sections may be replaced with a single -copy. If there are multiple Invariant Sections with the same name but -different contents, make the title of each such section unique by -adding at the end of it, in parentheses, the name of the original -author or publisher of that section if known, or else a unique number. -Make the same adjustment to the section titles in the list of -Invariant Sections in the license notice of the combined work. - -In the combination, you must combine any sections Entitled ``History'' -in the various original documents, forming one section Entitled -``History''; likewise combine any sections Entitled ``Acknowledgements'', -and any sections Entitled ``Dedications''. You must delete all -sections Entitled ``Endorsements.'' - -@item -COLLECTIONS OF DOCUMENTS - -You may make a collection consisting of the Document and other documents -released under this License, and replace the individual copies of this -License in the various documents with a single copy that is included in -the collection, provided that you follow the rules of this License for -verbatim copying of each of the documents in all other respects. - -You may extract a single document from such a collection, and distribute -it individually under this License, provided you insert a copy of this -License into the extracted document, and follow this License in all -other respects regarding verbatim copying of that document. - -@item -AGGREGATION WITH INDEPENDENT WORKS - -A compilation of the Document or its derivatives with other separate -and independent documents or works, in or on a volume of a storage or -distribution medium, is called an ``aggregate'' if the copyright -resulting from the compilation is not used to limit the legal rights -of the compilation's users beyond what the individual works permit. -When the Document is included in an aggregate, this License does not -apply to the other works in the aggregate which are not themselves -derivative works of the Document. - -If the Cover Text requirement of section 3 is applicable to these -copies of the Document, then if the Document is less than one half of -the entire aggregate, the Document's Cover Texts may be placed on -covers that bracket the Document within the aggregate, or the -electronic equivalent of covers if the Document is in electronic form. -Otherwise they must appear on printed covers that bracket the whole -aggregate. - -@item -TRANSLATION - -Translation is considered a kind of modification, so you may -distribute translations of the Document under the terms of section 4. -Replacing Invariant Sections with translations requires special -permission from their copyright holders, but you may include -translations of some or all Invariant Sections in addition to the -original versions of these Invariant Sections. You may include a -translation of this License, and all the license notices in the -Document, and any Warranty Disclaimers, provided that you also include -the original English version of this License and the original versions -of those notices and disclaimers. In case of a disagreement between -the translation and the original version of this License or a notice -or disclaimer, the original version will prevail. - -If a section in the Document is Entitled ``Acknowledgements'', -``Dedications'', or ``History'', the requirement (section 4) to Preserve -its Title (section 1) will typically require changing the actual -title. - -@item -TERMINATION - -You may not copy, modify, sublicense, or distribute the Document -except as expressly provided under this License. Any attempt -otherwise to copy, modify, sublicense, or distribute it is void, and -will automatically terminate your rights under this License. - -However, if you cease all violation of this License, then your license -from a particular copyright holder is reinstated (a) provisionally, -unless and until the copyright holder explicitly and finally -terminates your license, and (b) permanently, if the copyright holder -fails to notify you of the violation by some reasonable means prior to -60 days after the cessation. - -Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - -Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, receipt of a copy of some or all of the same material does -not give you any rights to use it. - -@item -FUTURE REVISIONS OF THIS LICENSE - -The Free Software Foundation may publish new, revised versions -of the GNU Free Documentation License from time to time. Such new -versions will be similar in spirit to the present version, but may -differ in detail to address new problems or concerns. See -@uref{http://www.gnu.org/copyleft/}. - -Each version of the License is given a distinguishing version number. -If the Document specifies that a particular numbered version of this -License ``or any later version'' applies to it, you have the option of -following the terms and conditions either of that specified version or -of any later version that has been published (not as a draft) by the -Free Software Foundation. If the Document does not specify a version -number of this License, you may choose any version ever published (not -as a draft) by the Free Software Foundation. If the Document -specifies that a proxy can decide which future versions of this -License can be used, that proxy's public statement of acceptance of a -version permanently authorizes you to choose that version for the -Document. - -@item -RELICENSING - -``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any -World Wide Web server that publishes copyrightable works and also -provides prominent facilities for anybody to edit those works. A -public wiki that anybody can edit is an example of such a server. A -``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the -site means any set of copyrightable works thus published on the MMC -site. - -``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0 -license published by Creative Commons Corporation, a not-for-profit -corporation with a principal place of business in San Francisco, -California, as well as future copyleft versions of that license -published by that same organization. - -``Incorporate'' means to publish or republish a Document, in whole or -in part, as part of another Document. - -An MMC is ``eligible for relicensing'' if it is licensed under this -License, and if all works that were first published under this License -somewhere other than this MMC, and subsequently incorporated in whole -or in part into the MMC, (1) had no cover texts or invariant sections, -and (2) were thus incorporated prior to November 1, 2008. - -The operator of an MMC Site may republish an MMC contained in the site -under CC-BY-SA on the same site at any time before August 1, 2009, -provided the MMC is eligible for relicensing. - -@end enumerate - -@page -@heading ADDENDUM: How to use this License for your documents - -To use this License in a document you have written, include a copy of -the License in the document and put the following copyright and -license notices just after the title page: - -@smallexample -@group - Copyright (C) @var{year} @var{your name}. - Permission is granted to copy, distribute and/or modify this document - under the terms of the GNU Free Documentation License, Version 1.3 - or any later version published by the Free Software Foundation; - with no Invariant Sections, no Front-Cover Texts, and no Back-Cover - Texts. A copy of the license is included in the section entitled ``GNU - Free Documentation License''. -@end group -@end smallexample - -If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, -replace the ``with@dots{}Texts.'' line with this: - -@smallexample -@group - with the Invariant Sections being @var{list their titles}, with - the Front-Cover Texts being @var{list}, and with the Back-Cover Texts - being @var{list}. -@end group -@end smallexample - -If you have Invariant Sections without Cover Texts, or some other -combination of the three, merge those two alternatives to suit the -situation. - -If your document contains nontrivial examples of program code, we -recommend releasing these examples in parallel under your choice of -free software license, such as the GNU General Public License, -to permit their use in free software. - -@c Local Variables: -@c ispell-local-pdict: "ispell-dict" -@c End: - diff --git a/readline/doc/history.3 b/readline/doc/history.3 deleted file mode 100644 index 8de64f63cb..0000000000 --- a/readline/doc/history.3 +++ /dev/null @@ -1,680 +0,0 @@ -.\" -.\" MAN PAGE COMMENTS to -.\" -.\" Chet Ramey -.\" Information Network Services -.\" Case Western Reserve University -.\" chet.ramey@case.edu -.\" -.\" Last Change: Sun Oct 8 11:43:43 EDT 2017 -.\" -.TH HISTORY 3 "2017 October 8" "GNU History 6.3" -.\" -.\" File Name macro. This used to be `.PN', for Path Name, -.\" but Sun doesn't seem to like that very much. -.\" -.de FN -\fI\|\\$1\|\fP -.. -.ds lp \fR\|(\fP -.ds rp \fR\|)\fP -.\" FnN return-value fun-name N arguments -.de Fn1 -\fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3\fP\\*(rp -.br -.. -.de Fn2 -.if t \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3,\|\\$4\fP\\*(rp -.if n \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3, \\$4\fP\\*(rp -.br -.. -.de Fn3 -.if t \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3,\|\\$4,\|\\$5\fP\|\\*(rp -.if n \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3, \\$4, \\$5\fP\\*(rp -.br -.. -.de Vb -\fI\\$1\fP \fB\\$2\fP -.br -.. -.SH NAME -history \- GNU History Library -.SH COPYRIGHT -.if t The GNU History Library is Copyright \(co 1989-2017 by the Free Software Foundation, Inc. -.if n The GNU History Library is Copyright (C) 1989-2017 by the Free Software Foundation, Inc. -.SH DESCRIPTION -Many programs read input from the user a line at a time. The GNU -History library is able to keep track of those lines, associate arbitrary -data with each line, and utilize information from previous lines in -composing new ones. -.PP -.SH "HISTORY EXPANSION" -.PP -The history library supports a history expansion feature that -is identical to the history expansion in -.BR bash. -This section describes what syntax features are available. -.PP -History expansions introduce words from the history list into -the input stream, making it easy to repeat commands, insert the -arguments to a previous command into the current input line, or -fix errors in previous commands quickly. -.PP -History expansion is usually performed immediately after a complete line -is read. -It takes place in two parts. -The first is to determine which line from the history list -to use during substitution. -The second is to select portions of that line for inclusion into -the current one. -The line selected from the history is the \fIevent\fP, -and the portions of that line that are acted upon are \fIwords\fP. -Various \fImodifiers\fP are available to manipulate the selected words. -The line is broken into words in the same fashion as \fBbash\fP -does when reading input, -so that several words that would otherwise be separated -are considered one word when surrounded by quotes (see the -description of \fBhistory_tokenize()\fP below). -History expansions are introduced by the appearance of the -history expansion character, which is \^\fB!\fP\^ by default. -Only backslash (\^\fB\e\fP\^) and single quotes can quote -the history expansion character. -.SS Event Designators -.PP -An event designator is a reference to a command line entry in the -history list. -Unless the reference is absolute, events are relative to the current -position in the history list. -.PP -.PD 0 -.TP -.B ! -Start a history substitution, except when followed by a -.BR blank , -newline, = or (. -.TP -.B !\fIn\fR -Refer to command line -.IR n . -.TP -.B !\-\fIn\fR -Refer to the current command minus -.IR n . -.TP -.B !! -Refer to the previous command. This is a synonym for `!\-1'. -.TP -.B !\fIstring\fR -Refer to the most recent command -preceding the current position in the history list -starting with -.IR string . -.TP -.B !?\fIstring\fR\fB[?]\fR -Refer to the most recent command -preceding the current position in the history list -containing -.IR string . -The trailing \fB?\fP may be omitted if -.I string -is followed immediately by a newline. -.TP -.B \d\s+2^\s-2\u\fIstring1\fP\d\s+2^\s-2\u\fIstring2\fP\d\s+2^\s-2\u -Quick substitution. Repeat the last command, replacing -.I string1 -with -.IR string2 . -Equivalent to -``!!:s/\fIstring1\fP/\fIstring2\fP/'' -(see \fBModifiers\fP below). -.TP -.B !# -The entire command line typed so far. -.PD -.SS Word Designators -.PP -Word designators are used to select desired words from the event. -A -.B : -separates the event specification from the word designator. -It may be omitted if the word designator begins with a -.BR ^ , -.BR $ , -.BR * , -.BR \- , -or -.BR % . -Words are numbered from the beginning of the line, -with the first word being denoted by 0 (zero). -Words are inserted into the current line separated by single spaces. -.PP -.PD 0 -.TP -.B 0 (zero) -The zeroth word. For the shell, this is the command -word. -.TP -.I n -The \fIn\fRth word. -.TP -.B ^ -The first argument. That is, word 1. -.TP -.B $ -The last word. This is usually the last argument, but will expand to the -zeroth word if there is only one word in the line. -.TP -.B % -The word matched by the most recent `?\fIstring\fR?' search. -.TP -.I x\fB\-\fPy -A range of words; `\-\fIy\fR' abbreviates `0\-\fIy\fR'. -.TP -.B * -All of the words but the zeroth. This is a synonym -for `\fI1\-$\fP'. It is not an error to use -.B * -if there is just one -word in the event; the empty string is returned in that case. -.TP -.B x* -Abbreviates \fIx\-$\fP. -.TP -.B x\- -Abbreviates \fIx\-$\fP like \fBx*\fP, but omits the last word. -.PD -.PP -If a word designator is supplied without an event specification, the -previous command is used as the event. -.SS Modifiers -.PP -After the optional word designator, there may appear a sequence of -one or more of the following modifiers, each preceded by a `:'. -.PP -.PD 0 -.PP -.TP -.B h -Remove a trailing file name component, leaving only the head. -.TP -.B t -Remove all leading file name components, leaving the tail. -.TP -.B r -Remove a trailing suffix of the form \fI.xxx\fP, leaving the -basename. -.TP -.B e -Remove all but the trailing suffix. -.TP -.B p -Print the new command but do not execute it. -.TP -.B q -Quote the substituted words, escaping further substitutions. -.TP -.B x -Quote the substituted words as with -.BR q , -but break into words at -.B blanks -and newlines. -.TP -.B s/\fIold\fP/\fInew\fP/ -Substitute -.I new -for the first occurrence of -.I old -in the event line. Any delimiter can be used in place of /. The -final delimiter is optional if it is the last character of the -event line. The delimiter may be quoted in -.I old -and -.I new -with a single backslash. If & appears in -.IR new , -it is replaced by -.IR old . -A single backslash will quote the &. If -.I old -is null, it is set to the last -.I old -substituted, or, if no previous history substitutions took place, -the last -.I string -in a -.B !?\fIstring\fR\fB[?]\fR -search. -.TP -.B & -Repeat the previous substitution. -.TP -.B g -Cause changes to be applied over the entire event line. This is -used in conjunction with `\fB:s\fP' (e.g., `\fB:gs/\fIold\fP/\fInew\fP/\fR') -or `\fB:&\fP'. If used with -`\fB:s\fP', any delimiter can be used -in place of /, and the final delimiter is optional -if it is the last character of the event line. -An \fBa\fP may be used as a synonym for \fBg\fP. -.TP -.B G -Apply the following `\fBs\fP' modifier once to each word in the event line. -.PD -.SH "PROGRAMMING WITH HISTORY FUNCTIONS" -This section describes how to use the History library in other programs. -.SS Introduction to History -.PP -The programmer using the History library has available functions -for remembering lines on a history list, associating arbitrary data -with a line, removing lines from the list, searching through the list -for a line containing an arbitrary text string, and referencing any line -in the list directly. In addition, a history \fIexpansion\fP function -is available which provides for a consistent user interface across -different programs. -.PP -The user using programs written with the History library has the -benefit of a consistent user interface with a set of well-known -commands for manipulating the text of previous lines and using that text -in new commands. The basic history manipulation commands are -identical to -the history substitution provided by \fBbash\fP. -.PP -If the programmer desires, he can use the Readline library, which -includes some history manipulation by default, and has the added -advantage of command line editing. -.PP -Before declaring any functions using any functionality the History -library provides in other code, an application writer should include -the file -.FN -in any file that uses the -History library's features. It supplies extern declarations for all -of the library's public functions and variables, and declares all of -the public data structures. - -.SS History Storage -.PP -The history list is an array of history entries. A history entry is -declared as follows: -.PP -.Vb "typedef void *" histdata_t; -.PP -.nf -typedef struct _hist_entry { - char *line; - char *timestamp; - histdata_t data; -} HIST_ENTRY; -.fi -.PP -The history list itself might therefore be declared as -.PP -.Vb "HIST_ENTRY **" the_history_list; -.PP -The state of the History library is encapsulated into a single structure: -.PP -.nf -/* - * A structure used to pass around the current state of the history. - */ -typedef struct _hist_state { - HIST_ENTRY **entries; /* Pointer to the entries themselves. */ - int offset; /* The location pointer within this array. */ - int length; /* Number of elements within this array. */ - int size; /* Number of slots allocated to this array. */ - int flags; -} HISTORY_STATE; -.fi -.PP -If the flags member includes \fBHS_STIFLED\fP, the history has been -stifled. -.SH "History Functions" -.PP -This section describes the calling sequence for the various functions -exported by the GNU History library. -.SS Initializing History and State Management -This section describes functions used to initialize and manage -the state of the History library when you want to use the history -functions in your program. - -.Fn1 void using_history void -Begin a session in which the history functions might be used. This -initializes the interactive variables. - -.Fn1 "HISTORY_STATE *" history_get_history_state void -Return a structure describing the current state of the input history. - -.Fn1 void history_set_history_state "HISTORY_STATE *state" -Set the state of the history list according to \fIstate\fP. - -.SS History List Management - -These functions manage individual entries on the history list, or set -parameters managing the list itself. - -.Fn1 void add_history "const char *string" -Place \fIstring\fP at the end of the history list. The associated data -field (if any) is set to \fBNULL\fP. -If the maximum number of history entries has been set using -\fBstifle_history()\fP, and the new number of history entries would exceed -that maximum, the oldest history entry is removed. - -.Fn1 void add_history_time "const char *string" -Change the time stamp associated with the most recent history entry to -\fIstring\fP. - -.Fn1 "HIST_ENTRY *" remove_history "int which" -Remove history entry at offset \fIwhich\fP from the history. The -removed element is returned so you can free the line, data, -and containing structure. - -.Fn1 "histdata_t" free_history_entry "HIST_ENTRY *histent" -Free the history entry \fIhistent\fP and any history library private -data associated with it. Returns the application-specific data -so the caller can dispose of it. - -.Fn3 "HIST_ENTRY *" replace_history_entry "int which" "const char *line" "histdata_t data" -Make the history entry at offset \fIwhich\fP have \fIline\fP and \fIdata\fP. -This returns the old entry so the caller can dispose of any -application-specific data. In the case -of an invalid \fIwhich\fP, a \fBNULL\fP pointer is returned. - -.Fn1 void clear_history "void" -Clear the history list by deleting all the entries. - -.Fn1 void stifle_history "int max" -Stifle the history list, remembering only the last \fImax\fP entries. -The history list will contain only \fImax\fP entries at a time. - -.Fn1 int unstifle_history "void" -Stop stifling the history. This returns the previously-set -maximum number of history entries (as set by \fBstifle_history()\fP). -history was stifled. The value is positive if the history was -stifled, negative if it wasn't. - -.Fn1 int history_is_stifled "void" -Returns non-zero if the history is stifled, zero if it is not. - -.SS Information About the History List - -These functions return information about the entire history list or -individual list entries. - -.Fn1 "HIST_ENTRY **" history_list "void" -Return a \fBNULL\fP terminated array of \fIHIST_ENTRY *\fP which is the -current input history. Element 0 of this list is the beginning of time. -If there is no history, return \fBNULL\fP. - -.Fn1 int where_history "void" -Returns the offset of the current history element. - -.Fn1 "HIST_ENTRY *" current_history "void" -Return the history entry at the current position, as determined by -\fBwhere_history()\fP. If there is no entry there, return a \fBNULL\fP -pointer. - -.Fn1 "HIST_ENTRY *" history_get "int offset" -Return the history entry at position \fIoffset\fP. -The range of valid values of \fIoffset\fP starts at \fBhistory_base\fP -and ends at \fBhistory_length\fP \- 1. -If there is no entry there, or if \fIoffset\fP is outside the valid -range, return a \fBNULL\fP pointer. - -.Fn1 "time_t" history_get_time "HIST_ENTRY *" -Return the time stamp associated with the history entry passed as the argument. - -.Fn1 int history_total_bytes "void" -Return the number of bytes that the primary history entries are using. -This function returns the sum of the lengths of all the lines in the -history. - -.SS Moving Around the History List - -These functions allow the current index into the history list to be -set or changed. - -.Fn1 int history_set_pos "int pos" -Set the current history offset to \fIpos\fP, an absolute index -into the list. -Returns 1 on success, 0 if \fIpos\fP is less than zero or greater -than the number of history entries. - -.Fn1 "HIST_ENTRY *" previous_history "void" -Back up the current history offset to the previous history entry, and -return a pointer to that entry. If there is no previous entry, return -a \fBNULL\fP pointer. - -.Fn1 "HIST_ENTRY *" next_history "void" -If the current history offset refers to a valid history entry, -increment the current history offset. -If the possibly-incremented history offset refers to a valid history -entry, return a pointer to that entry; -otherwise, return a \fBNULL\fP pointer. - -.SS Searching the History List - -These functions allow searching of the history list for entries containing -a specific string. Searching may be performed both forward and backward -from the current history position. The search may be \fIanchored\fP, -meaning that the string must match at the beginning of the history entry. - -.Fn2 int history_search "const char *string" "int direction" -Search the history for \fIstring\fP, starting at the current history offset. -If \fIdirection\fP is less than 0, then the search is through -previous entries, otherwise through subsequent entries. -If \fIstring\fP is found, then -the current history index is set to that history entry, and the value -returned is the offset in the line of the entry where -\fIstring\fP was found. Otherwise, nothing is changed, and a -1 is -returned. - -.Fn2 int history_search_prefix "const char *string" "int direction" -Search the history for \fIstring\fP, starting at the current history -offset. The search is anchored: matching lines must begin with -\fIstring\fP. If \fIdirection\fP is less than 0, then the search is -through previous entries, otherwise through subsequent entries. -If \fIstring\fP is found, then the -current history index is set to that entry, and the return value is 0. -Otherwise, nothing is changed, and a -1 is returned. - -.Fn3 int history_search_pos "const char *string" "int direction" "int pos" -Search for \fIstring\fP in the history list, starting at \fIpos\fP, an -absolute index into the list. If \fIdirection\fP is negative, the search -proceeds backward from \fIpos\fP, otherwise forward. Returns the absolute -index of the history element where \fIstring\fP was found, or -1 otherwise. - -.SS Managing the History File -The History library can read the history from and write it to a file. -This section documents the functions for managing a history file. - -.Fn1 int read_history "const char *filename" -Add the contents of \fIfilename\fP to the history list, a line at a time. -If \fIfilename\fP is \fBNULL\fP, then read from \fI~/.history\fP. -Returns 0 if successful, or \fBerrno\fP if not. - -.Fn3 int read_history_range "const char *filename" "int from" "int to" -Read a range of lines from \fIfilename\fP, adding them to the history list. -Start reading at line \fIfrom\fP and end at \fIto\fP. -If \fIfrom\fP is zero, start at the beginning. If \fIto\fP is less than -\fIfrom\fP, then read until the end of the file. If \fIfilename\fP is -\fBNULL\fP, then read from \fI~/.history\fP. Returns 0 if successful, -or \fBerrno\fP if not. - -.Fn1 int write_history "const char *filename" -Write the current history to \fIfilename\fP, overwriting \fIfilename\fP -if necessary. -If \fIfilename\fP is \fBNULL\fP, then write the history list to \fI~/.history\fP. -Returns 0 on success, or \fBerrno\fP on a read or write error. - - -.Fn2 int append_history "int nelements" "const char *filename" -Append the last \fInelements\fP of the history list to \fIfilename\fP. -If \fIfilename\fP is \fBNULL\fP, then append to \fI~/.history\fP. -Returns 0 on success, or \fBerrno\fP on a read or write error. - -.Fn2 int history_truncate_file "const char *filename" "int nlines" -Truncate the history file \fIfilename\fP, leaving only the last -\fInlines\fP lines. -If \fIfilename\fP is \fBNULL\fP, then \fI~/.history\fP is truncated. -Returns 0 on success, or \fBerrno\fP on failure. - -.SS History Expansion - -These functions implement history expansion. - -.Fn2 int history_expand "char *string" "char **output" -Expand \fIstring\fP, placing the result into \fIoutput\fP, a pointer -to a string. Returns: -.RS -.PD 0 -.TP -0 -If no expansions took place (or, if the only change in -the text was the removal of escape characters preceding the history expansion -character); -.TP -1 -if expansions did take place; -.TP --1 -if there was an error in expansion; -.TP -2 -if the returned line should be displayed, but not executed, -as with the \fB:p\fP modifier. -.PD -.RE -If an error ocurred in expansion, then \fIoutput\fP contains a descriptive -error message. - -.Fn3 "char *" get_history_event "const char *string" "int *cindex" "int qchar" -Returns the text of the history event beginning at \fIstring\fP + -\fI*cindex\fP. \fI*cindex\fP is modified to point to after the event -specifier. At function entry, \fIcindex\fP points to the index into -\fIstring\fP where the history event specification begins. \fIqchar\fP -is a character that is allowed to end the event specification in addition -to the ``normal'' terminating characters. - -.Fn1 "char **" history_tokenize "const char *string" -Return an array of tokens parsed out of \fIstring\fP, much as the -shell might. -The tokens are split on the characters in the -\fBhistory_word_delimiters\fP variable, -and shell quoting conventions are obeyed. - -.Fn3 "char *" history_arg_extract "int first" "int last" "const char *string" -Extract a string segment consisting of the \fIfirst\fP through \fIlast\fP -arguments present in \fIstring\fP. Arguments are split using -\fBhistory_tokenize()\fP. - -.SS History Variables - -This section describes the externally-visible variables exported by -the GNU History Library. - -.Vb int history_base -The logical offset of the first entry in the history list. - -.Vb int history_length -The number of entries currently stored in the history list. - -.Vb int history_max_entries -The maximum number of history entries. This must be changed using -\fBstifle_history()\fP. - -.Vb int history_wite_timestamps -If non-zero, timestamps are written to the history file, so they can be -preserved between sessions. The default value is 0, meaning that -timestamps are not saved. -The current timestamp format uses the value of \fIhistory_comment_char\fP -to delimit timestamp entries in the history file. If that variable does -not have a value (the default), timestamps will not be written. - -.Vb char history_expansion_char -The character that introduces a history event. The default is \fB!\fP. -Setting this to 0 inhibits history expansion. - -.Vb char history_subst_char -The character that invokes word substitution if found at the start of -a line. The default is \fB^\fP. - -.Vb char history_comment_char -During tokenization, if this character is seen as the first character -of a word, then it and all subsequent characters up to a newline are -ignored, suppressing history expansion for the remainder of the line. -This is disabled by default. - -.Vb "char *" history_word_delimiters -The characters that separate tokens for \fBhistory_tokenize()\fP. -The default value is \fB"\ \et\en()<>;&|"\fP. - -.Vb "char *" history_no_expand_chars -The list of characters which inhibit history expansion if found immediately -following \fBhistory_expansion_char\fP. The default is space, tab, newline, -\fB\er\fP, and \fB=\fP. - -.Vb "char *" history_search_delimiter_chars -The list of additional characters which can delimit a history search -string, in addition to space, tab, \fI:\fP and \fI?\fP in the case of -a substring search. The default is empty. - -.Vb int history_quotes_inhibit_expansion -If non-zero, double-quoted words are not scanned for the history expansion -character or the history comment character. The default value is 0. - -.Vb "rl_linebuf_func_t *" history_inhibit_expansion_function -This should be set to the address of a function that takes two arguments: -a \fBchar *\fP (\fIstring\fP) -and an \fBint\fP index into that string (\fIi\fP). -It should return a non-zero value if the history expansion starting at -\fIstring[i]\fP should not be performed; zero if the expansion should -be done. -It is intended for use by applications like \fBbash\fP that use the history -expansion character for additional purposes. -By default, this variable is set to \fBNULL\fP. -.SH FILES -.PD 0 -.TP -.FN ~/.history -Default filename for reading and writing saved history -.PD -.SH "SEE ALSO" -.PD 0 -.TP -\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey -.TP -\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey -.TP -\fIbash\fP(1) -.TP -\fIreadline\fP(3) -.PD -.SH AUTHORS -Brian Fox, Free Software Foundation -.br -bfox@gnu.org -.PP -Chet Ramey, Case Western Reserve University -.br -chet.ramey@case.edu -.SH BUG REPORTS -If you find a bug in the -.B history -library, you should report it. But first, you should -make sure that it really is a bug, and that it appears in the latest -version of the -.B history -library that you have. -.PP -Once you have determined that a bug actually exists, mail a -bug report to \fIbug\-readline\fP@\fIgnu.org\fP. -If you have a fix, you are welcome to mail that -as well! Suggestions and `philosophical' bug reports may be mailed -to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet -newsgroup -.BR gnu.bash.bug . -.PP -Comments and bug reports concerning -this manual page should be directed to -.IR chet.ramey@case.edu . diff --git a/readline/doc/history.texi b/readline/doc/history.texi deleted file mode 100644 index 98e2233277..0000000000 --- a/readline/doc/history.texi +++ /dev/null @@ -1,85 +0,0 @@ -\input texinfo @c -*-texinfo-*- -@c %**start of header (This is for running Texinfo on a region.) -@setfilename history.info -@settitle GNU History Library -@include version.texi - -@c %**end of header (This is for running Texinfo on a region.) - -@copying -This document describes the GNU History library -(version @value{VERSION}, @value{UPDATED}), -a programming tool that provides a consistent user interface for -recalling lines of previously typed input. - -Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. - -@quotation -Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.3 or -any later version published by the Free Software Foundation; with no -Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. -A copy of the license is included in the section entitled -``GNU Free Documentation License''. - -@end quotation -@end copying - -@dircategory Libraries -@direntry -* History: (history). The GNU history library API. -@end direntry - -@titlepage -@title GNU History Library -@subtitle Edition @value{EDITION}, for @code{History Library} Version @value{VERSION}. -@subtitle @value{UPDATED-MONTH} -@author Chet Ramey, Case Western Reserve University -@author Brian Fox, Free Software Foundation - -@page - -@vskip 0pt plus 1filll -@insertcopying - -@end titlepage - -@contents - -@ifnottex -@node Top -@top GNU History Library - -This document describes the GNU History library, a programming tool that -provides a consistent user interface for recalling lines of previously -typed input. - -@menu -* Using History Interactively:: GNU History User's Manual. -* Programming with GNU History:: GNU History Programmer's Manual. -* GNU Free Documentation License:: License for copying this manual. -* Concept Index:: Index of concepts described in this manual. -* Function and Variable Index:: Index of externally visible functions - and variables. -@end menu -@end ifnottex - -@syncodeindex fn vr - -@include hsuser.texi -@include hstech.texi - -@node GNU Free Documentation License -@appendix GNU Free Documentation License - -@include fdl.texi - -@node Concept Index -@appendix Concept Index -@printindex cp - -@node Function and Variable Index -@appendix Function and Variable Index -@printindex vr - -@bye diff --git a/readline/doc/hstech.texi b/readline/doc/hstech.texi deleted file mode 100644 index dbc21c14d9..0000000000 --- a/readline/doc/hstech.texi +++ /dev/null @@ -1,602 +0,0 @@ -@ignore -This file documents the user interface to the GNU History library. - -Copyright (C) 1988-2016 Free Software Foundation, Inc. -Authored by Brian Fox and Chet Ramey. - -Permission is granted to make and distribute verbatim copies of this manual -provided the copyright notice and this permission notice are preserved on -all copies. - -Permission is granted to process this file through Tex and print the -results, provided the printed document carries copying permission notice -identical to this one except for the removal of this paragraph (this -paragraph not being relevant to the printed manual). - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -GNU Copyright statement is available to the distributee, and provided that -the entire resulting derived work is distributed under the terms of a -permission notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions. -@end ignore - -@node Programming with GNU History -@chapter Programming with GNU History - -This chapter describes how to interface programs that you write -with the @sc{gnu} History Library. -It should be considered a technical guide. -For information on the interactive use of @sc{gnu} History, @pxref{Using -History Interactively}. - -@menu -* Introduction to History:: What is the GNU History library for? -* History Storage:: How information is stored. -* History Functions:: Functions that you can use. -* History Variables:: Variables that control behaviour. -* History Programming Example:: Example of using the GNU History Library. -@end menu - -@node Introduction to History -@section Introduction to History - -Many programs read input from the user a line at a time. The @sc{gnu} -History library is able to keep track of those lines, associate arbitrary -data with each line, and utilize information from previous lines in -composing new ones. - -The programmer using the History library has available functions -for remembering lines on a history list, associating arbitrary data -with a line, removing lines from the list, searching through the list -for a line containing an arbitrary text string, and referencing any line -in the list directly. In addition, a history @dfn{expansion} function -is available which provides for a consistent user interface across -different programs. - -The user using programs written with the History library has the -benefit of a consistent user interface with a set of well-known -commands for manipulating the text of previous lines and using that text -in new commands. The basic history manipulation commands are similar to -the history substitution provided by @code{csh}. - -If the programmer desires, he can use the Readline library, which -includes some history manipulation by default, and has the added -advantage of command line editing. - -Before declaring any functions using any functionality the History -library provides in other code, an application writer should include -the file @code{} in any file that uses the -History library's features. It supplies extern declarations for all -of the library's public functions and variables, and declares all of -the public data structures. - -@node History Storage -@section History Storage - -The history list is an array of history entries. A history entry is -declared as follows: - -@example -typedef void *histdata_t; - -typedef struct _hist_entry @{ - char *line; - char *timestamp; - histdata_t data; -@} HIST_ENTRY; -@end example - -The history list itself might therefore be declared as - -@example -HIST_ENTRY **the_history_list; -@end example - -The state of the History library is encapsulated into a single structure: - -@example -/* - * A structure used to pass around the current state of the history. - */ -typedef struct _hist_state @{ - HIST_ENTRY **entries; /* Pointer to the entries themselves. */ - int offset; /* The location pointer within this array. */ - int length; /* Number of elements within this array. */ - int size; /* Number of slots allocated to this array. */ - int flags; -@} HISTORY_STATE; -@end example - -If the flags member includes @code{HS_STIFLED}, the history has been -stifled. - -@node History Functions -@section History Functions - -This section describes the calling sequence for the various functions -exported by the @sc{gnu} History library. - -@menu -* Initializing History and State Management:: Functions to call when you - want to use history in a - program. -* History List Management:: Functions used to manage the list - of history entries. -* Information About the History List:: Functions returning information about - the history list. -* Moving Around the History List:: Functions used to change the position - in the history list. -* Searching the History List:: Functions to search the history list - for entries containing a string. -* Managing the History File:: Functions that read and write a file - containing the history list. -* History Expansion:: Functions to perform csh-like history - expansion. -@end menu - -@node Initializing History and State Management -@subsection Initializing History and State Management - -This section describes functions used to initialize and manage -the state of the History library when you want to use the history -functions in your program. - -@deftypefun void using_history (void) -Begin a session in which the history functions might be used. This -initializes the interactive variables. -@end deftypefun - -@deftypefun {HISTORY_STATE *} history_get_history_state (void) -Return a structure describing the current state of the input history. -@end deftypefun - -@deftypefun void history_set_history_state (HISTORY_STATE *state) -Set the state of the history list according to @var{state}. -@end deftypefun - -@node History List Management -@subsection History List Management - -These functions manage individual entries on the history list, or set -parameters managing the list itself. - -@deftypefun void add_history (const char *string) -Place @var{string} at the end of the history list. The associated data -field (if any) is set to @code{NULL}. -If the maximum number of history entries has been set using -@code{stifle_history()}, and the new number of history entries would exceed -that maximum, the oldest history entry is removed. -@end deftypefun - -@deftypefun void add_history_time (const char *string) -Change the time stamp associated with the most recent history entry to -@var{string}. -@end deftypefun - -@deftypefun {HIST_ENTRY *} remove_history (int which) -Remove history entry at offset @var{which} from the history. The -removed element is returned so you can free the line, data, -and containing structure. -@end deftypefun - -@deftypefun {histdata_t} free_history_entry (HIST_ENTRY *histent) -Free the history entry @var{histent} and any history library private -data associated with it. Returns the application-specific data -so the caller can dispose of it. -@end deftypefun - -@deftypefun {HIST_ENTRY *} replace_history_entry (int which, const char *line, histdata_t data) -Make the history entry at offset @var{which} have @var{line} and @var{data}. -This returns the old entry so the caller can dispose of any -application-specific data. In the case -of an invalid @var{which}, a @code{NULL} pointer is returned. -@end deftypefun - -@deftypefun void clear_history (void) -Clear the history list by deleting all the entries. -@end deftypefun - -@deftypefun void stifle_history (int max) -Stifle the history list, remembering only the last @var{max} entries. -The history list will contain only @var{max} entries at a time. -@end deftypefun - -@deftypefun int unstifle_history (void) -Stop stifling the history. This returns the previously-set -maximum number of history entries (as set by @code{stifle_history()}). -The value is positive if the history was -stifled, negative if it wasn't. -@end deftypefun - -@deftypefun int history_is_stifled (void) -Returns non-zero if the history is stifled, zero if it is not. -@end deftypefun - -@node Information About the History List -@subsection Information About the History List - -These functions return information about the entire history list or -individual list entries. - -@deftypefun {HIST_ENTRY **} history_list (void) -Return a @code{NULL} terminated array of @code{HIST_ENTRY *} which is the -current input history. Element 0 of this list is the beginning of time. -If there is no history, return @code{NULL}. -@end deftypefun - -@deftypefun int where_history (void) -Returns the offset of the current history element. -@end deftypefun - -@deftypefun {HIST_ENTRY *} current_history (void) -Return the history entry at the current position, as determined by -@code{where_history()}. If there is no entry there, return a @code{NULL} -pointer. -@end deftypefun - -@deftypefun {HIST_ENTRY *} history_get (int offset) -Return the history entry at position @var{offset}. -The range of valid -values of @var{offset} starts at @code{history_base} and ends at -@var{history_length} - 1 (@pxref{History Variables}). -If there is no entry there, or if @var{offset} is outside the valid -range, return a @code{NULL} pointer. -@end deftypefun - -@deftypefun time_t history_get_time (HIST_ENTRY *entry) -Return the time stamp associated with the history entry @var{entry}. -If the timestamp is missing or invalid, return 0. -@end deftypefun - -@deftypefun int history_total_bytes (void) -Return the number of bytes that the primary history entries are using. -This function returns the sum of the lengths of all the lines in the -history. -@end deftypefun - -@node Moving Around the History List -@subsection Moving Around the History List - -These functions allow the current index into the history list to be -set or changed. - -@deftypefun int history_set_pos (int pos) -Set the current history offset to @var{pos}, an absolute index -into the list. -Returns 1 on success, 0 if @var{pos} is less than zero or greater -than the number of history entries. -@end deftypefun - -@deftypefun {HIST_ENTRY *} previous_history (void) -Back up the current history offset to the previous history entry, and -return a pointer to that entry. If there is no previous entry, return -a @code{NULL} pointer. -@end deftypefun - -@deftypefun {HIST_ENTRY *} next_history (void) -If the current history offset refers to a valid history entry, -increment the current history offset. -If the possibly-incremented history offset refers to a valid history -entry, return a pointer to that entry; -otherwise, return a @code{BNULL} pointer. -@end deftypefun - -@node Searching the History List -@subsection Searching the History List -@cindex History Searching - -These functions allow searching of the history list for entries containing -a specific string. Searching may be performed both forward and backward -from the current history position. The search may be @dfn{anchored}, -meaning that the string must match at the beginning of the history entry. -@cindex anchored search - -@deftypefun int history_search (const char *string, int direction) -Search the history for @var{string}, starting at the current history offset. -If @var{direction} is less than 0, then the search is through -previous entries, otherwise through subsequent entries. -If @var{string} is found, then -the current history index is set to that history entry, and the value -returned is the offset in the line of the entry where -@var{string} was found. Otherwise, nothing is changed, and a -1 is -returned. -@end deftypefun - -@deftypefun int history_search_prefix (const char *string, int direction) -Search the history for @var{string}, starting at the current history -offset. The search is anchored: matching lines must begin with -@var{string}. If @var{direction} is less than 0, then the search is -through previous entries, otherwise through subsequent entries. -If @var{string} is found, then the -current history index is set to that entry, and the return value is 0. -Otherwise, nothing is changed, and a -1 is returned. -@end deftypefun - -@deftypefun int history_search_pos (const char *string, int direction, int pos) -Search for @var{string} in the history list, starting at @var{pos}, an -absolute index into the list. If @var{direction} is negative, the search -proceeds backward from @var{pos}, otherwise forward. Returns the absolute -index of the history element where @var{string} was found, or -1 otherwise. -@end deftypefun - -@node Managing the History File -@subsection Managing the History File - -The History library can read the history from and write it to a file. -This section documents the functions for managing a history file. - -@deftypefun int read_history (const char *filename) -Add the contents of @var{filename} to the history list, a line at a time. -If @var{filename} is @code{NULL}, then read from @file{~/.history}. -Returns 0 if successful, or @code{errno} if not. -@end deftypefun - -@deftypefun int read_history_range (const char *filename, int from, int to) -Read a range of lines from @var{filename}, adding them to the history list. -Start reading at line @var{from} and end at @var{to}. -If @var{from} is zero, start at the beginning. If @var{to} is less than -@var{from}, then read until the end of the file. If @var{filename} is -@code{NULL}, then read from @file{~/.history}. Returns 0 if successful, -or @code{errno} if not. -@end deftypefun - -@deftypefun int write_history (const char *filename) -Write the current history to @var{filename}, overwriting @var{filename} -if necessary. -If @var{filename} is @code{NULL}, then write the history list to -@file{~/.history}. -Returns 0 on success, or @code{errno} on a read or write error. -@end deftypefun - -@deftypefun int append_history (int nelements, const char *filename) -Append the last @var{nelements} of the history list to @var{filename}. -If @var{filename} is @code{NULL}, then append to @file{~/.history}. -Returns 0 on success, or @code{errno} on a read or write error. -@end deftypefun - -@deftypefun int history_truncate_file (const char *filename, int nlines) -Truncate the history file @var{filename}, leaving only the last -@var{nlines} lines. -If @var{filename} is @code{NULL}, then @file{~/.history} is truncated. -Returns 0 on success, or @code{errno} on failure. -@end deftypefun - -@node History Expansion -@subsection History Expansion - -These functions implement history expansion. - -@deftypefun int history_expand (char *string, char **output) -Expand @var{string}, placing the result into @var{output}, a pointer -to a string (@pxref{History Interaction}). Returns: -@table @code -@item 0 -If no expansions took place (or, if the only change in -the text was the removal of escape characters preceding the history expansion -character); -@item 1 -if expansions did take place; -@item -1 -if there was an error in expansion; -@item 2 -if the returned line should be displayed, but not executed, -as with the @code{:p} modifier (@pxref{Modifiers}). -@end table - -If an error occurred in expansion, then @var{output} contains a descriptive -error message. -@end deftypefun - -@deftypefun {char *} get_history_event (const char *string, int *cindex, int qchar) -Returns the text of the history event beginning at @var{string} + -@var{*cindex}. @var{*cindex} is modified to point to after the event -specifier. At function entry, @var{cindex} points to the index into -@var{string} where the history event specification begins. @var{qchar} -is a character that is allowed to end the event specification in addition -to the ``normal'' terminating characters. -@end deftypefun - -@deftypefun {char **} history_tokenize (const char *string) -Return an array of tokens parsed out of @var{string}, much as the -shell might. The tokens are split on the characters in the -@var{history_word_delimiters} variable, -and shell quoting conventions are obeyed as described below. -@end deftypefun - -@deftypefun {char *} history_arg_extract (int first, int last, const char *string) -Extract a string segment consisting of the @var{first} through @var{last} -arguments present in @var{string}. Arguments are split using -@code{history_tokenize}. -@end deftypefun - -@node History Variables -@section History Variables - -This section describes the externally-visible variables exported by -the @sc{gnu} History Library. - -@deftypevar int history_base -The logical offset of the first entry in the history list. -@end deftypevar - -@deftypevar int history_length -The number of entries currently stored in the history list. -@end deftypevar - -@deftypevar int history_max_entries -The maximum number of history entries. This must be changed using -@code{stifle_history()}. -@end deftypevar - -@deftypevar int history_write_timestamps -If non-zero, timestamps are written to the history file, so they can be -preserved between sessions. The default value is 0, meaning that -timestamps are not saved. - -The current timestamp format uses the value of @var{history_comment_char} -to delimit timestamp entries in the history file. If that variable does -not have a value (the default), timestamps will not be written. -@end deftypevar - -@deftypevar char history_expansion_char -The character that introduces a history event. The default is @samp{!}. -Setting this to 0 inhibits history expansion. -@end deftypevar - -@deftypevar char history_subst_char -The character that invokes word substitution if found at the start of -a line. The default is @samp{^}. -@end deftypevar - -@deftypevar char history_comment_char -During tokenization, if this character is seen as the first character -of a word, then it and all subsequent characters up to a newline are -ignored, suppressing history expansion for the remainder of the line. -This is disabled by default. -@end deftypevar - -@deftypevar {char *} history_word_delimiters -The characters that separate tokens for @code{history_tokenize()}. -The default value is @code{" \t\n()<>;&|"}. -@end deftypevar - -@deftypevar {char *} history_search_delimiter_chars -The list of additional characters which can delimit a history search -string, in addition to space, TAB, @samp{:} and @samp{?} in the case of -a substring search. The default is empty. -@end deftypevar - -@deftypevar {char *} history_no_expand_chars -The list of characters which inhibit history expansion if found immediately -following @var{history_expansion_char}. The default is space, tab, newline, -carriage return, and @samp{=}. -@end deftypevar - -@deftypevar int history_quotes_inhibit_expansion -If non-zero, the history expansion code implements shell-like quoting: -single-quoted words are not scanned for the history expansion -character or the history comment character, and double-quoted words may -have history expansion performed, since single quotes are not special -within double quotes. -The default value is 0. -@end deftypevar - -@deftypevar int history_quoting_state -An application may set this variable to indicate that the current line -being expanded is subject to existing quoting. If set to @samp{'}, the -history expansion function will assume that the line is single-quoted and -inhibit expansion until it reads an unquoted closing single quote; if set -to @samp{"}, history expansion will assume the line is double quoted until -it reads an unquoted closing double quote. If set to zero, the default, -the history expansion function will assume the line is not quoted and -treat quote characters within the line as described above. -This is only effective if @var{history_quotes_inhibit_expansion} is set. -@end deftypevar - -@deftypevar {rl_linebuf_func_t *} history_inhibit_expansion_function -This should be set to the address of a function that takes two arguments: -a @code{char *} (@var{string}) -and an @code{int} index into that string (@var{i}). -It should return a non-zero value if the history expansion starting at -@var{string[i]} should not be performed; zero if the expansion should -be done. -It is intended for use by applications like Bash that use the history -expansion character for additional purposes. -By default, this variable is set to @code{NULL}. -@end deftypevar - -@node History Programming Example -@section History Programming Example - -The following program demonstrates simple use of the @sc{gnu} History Library. - -@smallexample -#include -#include - -main (argc, argv) - int argc; - char **argv; -@{ - char line[1024], *t; - int len, done = 0; - - line[0] = 0; - - using_history (); - while (!done) - @{ - printf ("history$ "); - fflush (stdout); - t = fgets (line, sizeof (line) - 1, stdin); - if (t && *t) - @{ - len = strlen (t); - if (t[len - 1] == '\n') - t[len - 1] = '\0'; - @} - - if (!t) - strcpy (line, "quit"); - - if (line[0]) - @{ - char *expansion; - int result; - - result = history_expand (line, &expansion); - if (result) - fprintf (stderr, "%s\n", expansion); - - if (result < 0 || result == 2) - @{ - free (expansion); - continue; - @} - - add_history (expansion); - strncpy (line, expansion, sizeof (line) - 1); - free (expansion); - @} - - if (strcmp (line, "quit") == 0) - done = 1; - else if (strcmp (line, "save") == 0) - write_history ("history_file"); - else if (strcmp (line, "read") == 0) - read_history ("history_file"); - else if (strcmp (line, "list") == 0) - @{ - register HIST_ENTRY **the_list; - register int i; - - the_list = history_list (); - if (the_list) - for (i = 0; the_list[i]; i++) - printf ("%d: %s\n", i + history_base, the_list[i]->line); - @} - else if (strncmp (line, "delete", 6) == 0) - @{ - int which; - if ((sscanf (line + 6, "%d", &which)) == 1) - @{ - HIST_ENTRY *entry = remove_history (which); - if (!entry) - fprintf (stderr, "No such entry %d\n", which); - else - @{ - free (entry->line); - free (entry); - @} - @} - else - @{ - fprintf (stderr, "non-numeric arg given to `delete'\n"); - @} - @} - @} -@} -@end smallexample diff --git a/readline/doc/hsuser.texi b/readline/doc/hsuser.texi deleted file mode 100644 index e92c794b39..0000000000 --- a/readline/doc/hsuser.texi +++ /dev/null @@ -1,506 +0,0 @@ -@ignore -This file documents the user interface to the GNU History library. - -Copyright (C) 1988--2018 Free Software Foundation, Inc. -Authored by Brian Fox and Chet Ramey. - -Permission is granted to make and distribute verbatim copies of this manual -provided the copyright notice and this permission notice are preserved on -all copies. - -Permission is granted to process this file through Tex and print the -results, provided the printed document carries copying permission notice -identical to this one except for the removal of this paragraph (this -paragraph not being relevant to the printed manual). - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -GNU Copyright statement is available to the distributee, and provided that -the entire resulting derived work is distributed under the terms of a -permission notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions. -@end ignore - -@node Using History Interactively -@chapter Using History Interactively - -@c GDB bundling modification: -@c @ifclear BashFeatures -@c @defcodeindex bt -@c @end ifclear - -@ifset BashFeatures -This chapter describes how to use the @sc{gnu} History Library -interactively, from a user's standpoint. -It should be considered a user's guide. -For information on using the @sc{gnu} History Library in other programs, -see the @sc{gnu} Readline Library Manual. -@end ifset -@ifclear BashFeatures -This chapter describes how to use the @sc{gnu} History Library interactively, -from a user's standpoint. It should be considered a user's guide. For -information on using the @sc{gnu} History Library in your own programs, -@c GDB bundling modification: -@pxref{Programming with GNU History, , , history, GNU History Library}. -@end ifclear - -@ifset BashFeatures -@menu -* Bash History Facilities:: How Bash lets you manipulate your command - history. -* Bash History Builtins:: The Bash builtin commands that manipulate - the command history. -* History Interaction:: What it feels like using History as a user. -@end menu -@end ifset -@ifclear BashFeatures -@menu -* History Interaction:: What it feels like using History as a user. -@end menu -@end ifclear - -@ifset BashFeatures -@node Bash History Facilities -@section Bash History Facilities -@cindex command history -@cindex history list - -When the @option{-o history} option to the @code{set} builtin -is enabled (@pxref{The Set Builtin}), -the shell provides access to the @dfn{command history}, -the list of commands previously typed. -The value of the @env{HISTSIZE} shell variable is used as the -number of commands to save in a history list. -The text of the last @env{$HISTSIZE} -commands (default 500) is saved. -The shell stores each command in the history list prior to -parameter and variable expansion -but after history expansion is performed, subject to the -values of the shell variables -@env{HISTIGNORE} and @env{HISTCONTROL}. - -When the shell starts up, the history is initialized from the -file named by the @env{HISTFILE} variable (default @file{~/.bash_history}). -The file named by the value of @env{HISTFILE} is truncated, if -necessary, to contain no more than the number of lines specified by -the value of the @env{HISTFILESIZE} variable. -When a shell with history enabled exits, the last -@env{$HISTSIZE} lines are copied from the history list to the file -named by @env{$HISTFILE}. -If the @code{histappend} shell option is set (@pxref{Bash Builtins}), -the lines are appended to the history file, -otherwise the history file is overwritten. -If @env{HISTFILE} -is unset, or if the history file is unwritable, the history is not saved. -After saving the history, the history file is truncated -to contain no more than @env{$HISTFILESIZE} lines. -If @env{HISTFILESIZE} is unset, or set to null, a non-numeric value, or -a numeric value less than zero, the history file is not truncated. - -If the @env{HISTTIMEFORMAT} is set, the time stamp information -associated with each history entry is written to the history file, -marked with the history comment character. -When the history file is read, lines beginning with the history -comment character followed immediately by a digit are interpreted -as timestamps for the following history entry. - -The builtin command @code{fc} may be used to list or edit and re-execute -a portion of the history list. -The @code{history} builtin may be used to display or modify the history -list and manipulate the history file. -When using command-line editing, search commands -are available in each editing mode that provide access to the -history list (@pxref{Commands For History}). - -The shell allows control over which commands are saved on the history -list. The @env{HISTCONTROL} and @env{HISTIGNORE} -variables may be set to cause the shell to save only a subset of the -commands entered. -The @code{cmdhist} -shell option, if enabled, causes the shell to attempt to save each -line of a multi-line command in the same history entry, adding -semicolons where necessary to preserve syntactic correctness. -The @code{lithist} -shell option causes the shell to save the command with embedded newlines -instead of semicolons. -The @code{shopt} builtin is used to set these options. -@xref{The Shopt Builtin}, for a description of @code{shopt}. - -@node Bash History Builtins -@section Bash History Builtins -@cindex history builtins - -Bash provides two builtin commands which manipulate the -history list and history file. - -@table @code - -@item fc -@btindex fc -@example -@code{fc [-e @var{ename}] [-lnr] [@var{first}] [@var{last}]} -@code{fc -s [@var{pat}=@var{rep}] [@var{command}]} -@end example - -The first form selects a range of commands from @var{first} to -@var{last} from the history list and displays or edits and re-executes -them. -Both @var{first} and -@var{last} may be specified as a string (to locate the most recent -command beginning with that string) or as a number (an index into the -history list, where a negative number is used as an offset from the -current command number). If @var{last} is not specified, it is set to -@var{first}. If @var{first} is not specified, it is set to the previous -command for editing and @minus{}16 for listing. If the @option{-l} flag is -given, the commands are listed on standard output. The @option{-n} flag -suppresses the command numbers when listing. The @option{-r} flag -reverses the order of the listing. Otherwise, the editor given by -@var{ename} is invoked on a file containing those commands. If -@var{ename} is not given, the value of the following variable expansion -is used: @code{$@{FCEDIT:-$@{EDITOR:-vi@}@}}. This says to use the -value of the @env{FCEDIT} variable if set, or the value of the -@env{EDITOR} variable if that is set, or @code{vi} if neither is set. -When editing is complete, the edited commands are echoed and executed. - -In the second form, @var{command} is re-executed after each instance -of @var{pat} in the selected command is replaced by @var{rep}. -@var{command} is intepreted the same as @var{first} above. - -A useful alias to use with the @code{fc} command is @code{r='fc -s'}, so -that typing @samp{r cc} runs the last command beginning with @code{cc} -and typing @samp{r} re-executes the last command (@pxref{Aliases}). - -@item history -@btindex history -@example -history [@var{n}] -history -c -history -d @var{offset} -history -d @var{start}-@var{end} -history [-anrw] [@var{filename}] -history -ps @var{arg} -@end example - -With no options, display the history list with line numbers. -Lines prefixed with a @samp{*} have been modified. -An argument of @var{n} lists only the last @var{n} lines. -If the shell variable @env{HISTTIMEFORMAT} is set and not null, -it is used as a format string for @var{strftime} to display -the time stamp associated with each displayed history entry. -No intervening blank is printed between the formatted time stamp -and the history line. - -Options, if supplied, have the following meanings: - -@table @code -@item -c -Clear the history list. This may be combined -with the other options to replace the history list completely. - -@item -d @var{offset} -Delete the history entry at position @var{offset}. -If @var{offset} is positive, it should be specified as it appears when -the history is displayed. -If @var{offset} is negative, it is interpreted as relative to one greater -than the last history position, so negative indices count back from the -end of the history, and an index of @samp{-1} refers to the current -@code{history -d} command. - -@item -d @var{start}-@var{end} -Delete the history entries between positions @var{start} and @var{end}, -inclusive. Positive and negative values for @var{start} and @var{end} -are interpreted as described above. - -@item -a -Append the new history lines to the history file. -These are history lines entered since the beginning of the current -Bash session, but not already appended to the history file. - -@item -n -Append the history lines not already read from the history file -to the current history list. These are lines appended to the history -file since the beginning of the current Bash session. - -@item -r -Read the history file and append its contents to -the history list. - -@item -w -Write out the current history list to the history file. - -@item -p -Perform history substitution on the @var{arg}s and display the result -on the standard output, without storing the results in the history list. - -@item -s -The @var{arg}s are added to the end of -the history list as a single entry. - -@end table - -When any of the @option{-w}, @option{-r}, @option{-a}, or @option{-n} options is -used, if @var{filename} -is given, then it is used as the history file. If not, then -the value of the @env{HISTFILE} variable is used. - -@end table -@end ifset - -@node History Interaction -@section History Expansion -@cindex history expansion - -The History library provides a history expansion feature that is similar -to the history expansion provided by @code{csh}. This section -describes the syntax used to manipulate the history information. - -History expansions introduce words from the history list into -the input stream, making it easy to repeat commands, insert the -arguments to a previous command into the current input line, or -fix errors in previous commands quickly. - -@ifset BashFeatures -History expansion is performed immediately after a complete line -is read, before the shell breaks it into words, and is performed -on each line individually. Bash attempts to inform the history -expansion functions about quoting still in effect from previous lines. -@end ifset - -History expansion takes place in two parts. The first is to determine -which line from the history list should be used during substitution. -The second is to select portions of that line for inclusion into the -current one. The line selected from the history is called the -@dfn{event}, and the portions of that line that are acted upon are -called @dfn{words}. Various @dfn{modifiers} are available to manipulate -the selected words. The line is broken into words in the same fashion -that Bash does, so that several words -surrounded by quotes are considered one word. -History expansions are introduced by the appearance of the -history expansion character, which is @samp{!} by default. - -History expansion implements shell-like quoting conventions: -a backslash can be used to remove the special handling for the next character; -single quotes enclose verbatim sequences of characters, and can be used to -inhibit history expansion; -and characters enclosed within double quotes may be subject to history -expansion, since backslash can escape the history expansion character, -but single quotes may not, since they are not treated specially within -double quotes. - -@ifset BashFeatures -When using the shell, only @samp{\} and @samp{'} may be used to escape the -history expansion character, but the history expansion character is -also treated as quoted if it immediately precedes the closing double quote -in a double-quoted string. -@end ifset - -@ifset BashFeatures -Several shell options settable with the @code{shopt} -builtin (@pxref{The Shopt Builtin}) may be used to tailor -the behavior of history expansion. If the -@code{histverify} shell option is enabled, and Readline -is being used, history substitutions are not immediately passed to -the shell parser. -Instead, the expanded line is reloaded into the Readline -editing buffer for further modification. -If Readline is being used, and the @code{histreedit} -shell option is enabled, a failed history expansion will be -reloaded into the Readline editing buffer for correction. -The @option{-p} option to the @code{history} builtin command -may be used to see what a history expansion will do before using it. -The @option{-s} option to the @code{history} builtin may be used to -add commands to the end of the history list without actually executing -them, so that they are available for subsequent recall. -This is most useful in conjunction with Readline. - -The shell allows control of the various characters used by the -history expansion mechanism with the @code{histchars} variable, -as explained above (@pxref{Bash Variables}). The shell uses -the history comment character to mark history timestamps when -writing the history file. -@end ifset - -@menu -* Event Designators:: How to specify which history line to use. -* Word Designators:: Specifying which words are of interest. -* Modifiers:: Modifying the results of substitution. -@end menu - -@node Event Designators -@subsection Event Designators -@cindex event designators - -An event designator is a reference to a command line entry in the -history list. -Unless the reference is absolute, events are relative to the current -position in the history list. -@cindex history events - -@table @asis - -@item @code{!} -@ifset BashFeatures -Start a history substitution, except when followed by a space, tab, -the end of the line, @samp{=} or @samp{(} (when the -@code{extglob} shell option is enabled using the @code{shopt} builtin). -@end ifset -@ifclear BashFeatures -Start a history substitution, except when followed by a space, tab, -the end of the line, or @samp{=}. -@end ifclear - -@item @code{!@var{n}} -Refer to command line @var{n}. - -@item @code{!-@var{n}} -Refer to the command @var{n} lines back. - -@item @code{!!} -Refer to the previous command. This is a synonym for @samp{!-1}. - -@item @code{!@var{string}} -Refer to the most recent command -preceding the current position in the history list -starting with @var{string}. - -@item @code{!?@var{string}[?]} -Refer to the most recent command -preceding the current position in the history list -containing @var{string}. -The trailing -@samp{?} may be omitted if the @var{string} is followed immediately by -a newline. - -@item @code{^@var{string1}^@var{string2}^} -Quick Substitution. Repeat the last command, replacing @var{string1} -with @var{string2}. Equivalent to -@code{!!:s/@var{string1}/@var{string2}/}. - -@item @code{!#} -The entire command line typed so far. - -@end table - -@node Word Designators -@subsection Word Designators - -Word designators are used to select desired words from the event. -A @samp{:} separates the event specification from the word designator. It -may be omitted if the word designator begins with a @samp{^}, @samp{$}, -@samp{*}, @samp{-}, or @samp{%}. Words are numbered from the beginning -of the line, with the first word being denoted by 0 (zero). Words are -inserted into the current line separated by single spaces. - -@need 0.75 -For example, - -@table @code -@item !! -designates the preceding command. When you type this, the preceding -command is repeated in toto. - -@item !!:$ -designates the last argument of the preceding command. This may be -shortened to @code{!$}. - -@item !fi:2 -designates the second argument of the most recent command starting with -the letters @code{fi}. -@end table - -@need 0.75 -Here are the word designators: - -@table @code - -@item 0 (zero) -The @code{0}th word. For many applications, this is the command word. - -@item @var{n} -The @var{n}th word. - -@item ^ -The first argument; that is, word 1. - -@item $ -The last argument. - -@item % -The word matched by the most recent @samp{?@var{string}?} search. - -@item @var{x}-@var{y} -A range of words; @samp{-@var{y}} abbreviates @samp{0-@var{y}}. - -@item * -All of the words, except the @code{0}th. This is a synonym for @samp{1-$}. -It is not an error to use @samp{*} if there is just one word in the event; -the empty string is returned in that case. - -@item @var{x}* -Abbreviates @samp{@var{x}-$} - -@item @var{x}- -Abbreviates @samp{@var{x}-$} like @samp{@var{x}*}, but omits the last word. - -@end table - -If a word designator is supplied without an event specification, the -previous command is used as the event. - -@node Modifiers -@subsection Modifiers - -After the optional word designator, you can add a sequence of one or more -of the following modifiers, each preceded by a @samp{:}. - -@table @code - -@item h -Remove a trailing pathname component, leaving only the head. - -@item t -Remove all leading pathname components, leaving the tail. - -@item r -Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving -the basename. - -@item e -Remove all but the trailing suffix. - -@item p -Print the new command but do not execute it. - -@ifset BashFeatures -@item q -Quote the substituted words, escaping further substitutions. - -@item x -Quote the substituted words as with @samp{q}, -but break into words at spaces, tabs, and newlines. -@end ifset - -@item s/@var{old}/@var{new}/ -Substitute @var{new} for the first occurrence of @var{old} in the -event line. Any delimiter may be used in place of @samp{/}. -The delimiter may be quoted in @var{old} and @var{new} -with a single backslash. If @samp{&} appears in @var{new}, -it is replaced by @var{old}. A single backslash will quote -the @samp{&}. The final delimiter is optional if it is the last -character on the input line. - -@item & -Repeat the previous substitution. - -@item g -@itemx a -Cause changes to be applied over the entire event line. Used in -conjunction with @samp{s}, as in @code{gs/@var{old}/@var{new}/}, -or with @samp{&}. - -@item G -Apply the following @samp{s} modifier once to each word in the event. - -@end table diff --git a/readline/doc/readline.3 b/readline/doc/readline.3 deleted file mode 100644 index be89c2dff8..0000000000 --- a/readline/doc/readline.3 +++ /dev/null @@ -1,1539 +0,0 @@ -.\" -.\" MAN PAGE COMMENTS to -.\" -.\" Chet Ramey -.\" Information Network Services -.\" Case Western Reserve University -.\" chet.ramey@case.edu -.\" -.\" Last Change: Thu Dec 28 14:49:51 EST 2017 -.\" -.TH READLINE 3 "2017 December 28" "GNU Readline 7.0" -.\" -.\" File Name macro. This used to be `.PN', for Path Name, -.\" but Sun doesn't seem to like that very much. -.\" -.de FN -\fI\|\\$1\|\fP -.. -.SH NAME -readline \- get a line from a user with editing -.SH SYNOPSIS -.LP -.nf -.ft B -#include -#include -#include -.ft -.fi -.LP -.nf -\fIchar *\fP -.br -\fBreadline\fP (\fIconst char *prompt\fP); -.fi -.SH COPYRIGHT -.if n Readline is Copyright (C) 1989\-2014 Free Software Foundation, Inc. -.if t Readline is Copyright \(co 1989\-2014 Free Software Foundation, Inc. -.SH DESCRIPTION -.LP -.B readline -will read a line from the terminal -and return it, using -.B prompt -as a prompt. If -.B prompt -is \fBNULL\fP or the empty string, no prompt is issued. -The line returned is allocated with -.IR malloc (3); -the caller must free it when finished. The line returned -has the final newline removed, so only the text of the line -remains. -.LP -.B readline -offers editing capabilities while the user is entering the -line. -By default, the line editing commands -are similar to those of emacs. -A vi\-style line editing interface is also available. -.LP -This manual page describes only the most basic use of \fBreadline\fP. -Much more functionality is available; see -\fIThe GNU Readline Library\fP and \fIThe GNU History Library\fP -for additional information. -.SH RETURN VALUE -.LP -.B readline -returns the text of the line read. A blank line -returns the empty string. If -.B EOF -is encountered while reading a line, and the line is empty, -.B NULL -is returned. If an -.B EOF -is read with a non\-empty line, it is -treated as a newline. -.SH NOTATION -.LP -An Emacs-style notation is used to denote -keystrokes. Control keys are denoted by C\-\fIkey\fR, e.g., C\-n -means Control\-N. Similarly, -.I meta -keys are denoted by M\-\fIkey\fR, so M\-x means Meta\-X. (On keyboards -without a -.I meta -key, M\-\fIx\fP means ESC \fIx\fP, i.e., press the Escape key -then the -.I x -key. This makes ESC the \fImeta prefix\fP. -The combination M\-C\-\fIx\fP means ESC\-Control\-\fIx\fP, -or press the Escape key -then hold the Control key while pressing the -.I x -key.) -.PP -Readline commands may be given numeric -.IR arguments , -which normally act as a repeat count. Sometimes, however, it is the -sign of the argument that is significant. Passing a negative argument -to a command that acts in the forward direction (e.g., \fBkill\-line\fP) -causes that command to act in a backward direction. -Commands whose behavior with arguments deviates from this are noted -below. -.PP -When a command is described as \fIkilling\fP text, the text -deleted is saved for possible future retrieval -(\fIyanking\fP). The killed text is saved in a -\fIkill ring\fP. Consecutive kills cause the text to be -accumulated into one unit, which can be yanked all at once. -Commands which do not kill text separate the chunks of text -on the kill ring. -.SH INITIALIZATION FILE -.LP -Readline is customized by putting commands in an initialization -file (the \fIinputrc\fP file). -The name of this file is taken from the value of the -.B INPUTRC -environment variable. If that variable is unset, the default is -.IR ~/.inputrc . -If that file does not exist or cannot be read, the ultimate default is -.IR /etc/inputrc . -When a program which uses the readline library starts up, the -init file is read, and the key bindings and variables are set. -There are only a few basic constructs allowed in the -readline init file. Blank lines are ignored. -Lines beginning with a \fB#\fP are comments. -Lines beginning with a \fB$\fP indicate conditional constructs. -Other lines denote key bindings and variable settings. -Each program using this library may add its own commands -and bindings. -.PP -For example, placing -.RS -.PP -M\-Control\-u: universal\-argument -.RE -or -.RS -C\-Meta\-u: universal\-argument -.RE -.sp -into the -.I inputrc -would make M\-C\-u execute the readline command -.IR universal\-argument . -.PP -The following symbolic character names are recognized while -processing key bindings: -.IR DEL , -.IR ESC , -.IR ESCAPE , -.IR LFD , -.IR NEWLINE , -.IR RET , -.IR RETURN , -.IR RUBOUT , -.IR SPACE , -.IR SPC , -and -.IR TAB . -.PP -In addition to command names, readline allows keys to be bound -to a string that is inserted when the key is pressed (a \fImacro\fP). -.PP -.SS Key Bindings -.PP -The syntax for controlling key bindings in the -.I inputrc -file is simple. All that is required is the name of the -command or the text of a macro and a key sequence to which -it should be bound. The name may be specified in one of two ways: -as a symbolic key name, possibly with \fIMeta\-\fP or \fIControl\-\fP -prefixes, or as a key sequence. -The name and key sequence are separated by a colon. There can be no -whitespace between the name and the colon. -.PP -When using the form \fBkeyname\fP:\^\fIfunction-name\fP or \fImacro\fP, -.I keyname -is the name of a key spelled out in English. For example: -.sp -.RS -Control\-u: universal\-argument -.br -Meta\-Rubout: backward\-kill\-word -.br -Control\-o: "> output" -.RE -.LP -In the above example, -.I C\-u -is bound to the function -.BR universal\-argument , -.I M-DEL -is bound to the function -.BR backward\-kill\-word , -and -.I C\-o -is bound to run the macro -expressed on the right hand side (that is, to insert the text -.if t \f(CW> output\fP -.if n ``> output'' -into the line). -.PP -In the second form, \fB"keyseq"\fP:\^\fIfunction\-name\fP or \fImacro\fP, -.B keyseq -differs from -.B keyname -above in that strings denoting -an entire key sequence may be specified by placing the sequence -within double quotes. Some GNU Emacs style key escapes can be -used, as in the following example, but the symbolic character names -are not recognized. -.sp -.RS -"\eC\-u": universal\-argument -.br -"\eC\-x\eC\-r": re\-read\-init\-file -.br -"\ee[11~": "Function Key 1" -.RE -.PP -In this example, -.I C-u -is again bound to the function -.BR universal\-argument . -.I "C-x C-r" -is bound to the function -.BR re\-read\-init\-file , -and -.I "ESC [ 1 1 ~" -is bound to insert the text -.if t \f(CWFunction Key 1\fP. -.if n ``Function Key 1''. -.PP -The full set of GNU Emacs style escape sequences available when specifying -key sequences is -.RS -.PD 0 -.TP -.B \eC\- -control prefix -.TP -.B \eM\- -meta prefix -.TP -.B \ee -an escape character -.TP -.B \e\e -backslash -.TP -.B \e" -literal ", a double quote -.TP -.B \e' -literal ', a single quote -.RE -.PD -.PP -In addition to the GNU Emacs style escape sequences, a second -set of backslash escapes is available: -.RS -.PD 0 -.TP -.B \ea -alert (bell) -.TP -.B \eb -backspace -.TP -.B \ed -delete -.TP -.B \ef -form feed -.TP -.B \en -newline -.TP -.B \er -carriage return -.TP -.B \et -horizontal tab -.TP -.B \ev -vertical tab -.TP -.B \e\fInnn\fP -the eight-bit character whose value is the octal value \fInnn\fP -(one to three digits) -.TP -.B \ex\fIHH\fP -the eight-bit character whose value is the hexadecimal value \fIHH\fP -(one or two hex digits) -.RE -.PD -.PP -When entering the text of a macro, single or double quotes should -be used to indicate a macro definition. Unquoted text -is assumed to be a function name. -In the macro body, the backslash escapes described above are expanded. -Backslash will quote any other character in the macro text, -including " and '. -.PP -.B Bash -allows the current readline key bindings to be displayed or modified -with the -.B bind -builtin command. The editing mode may be switched during interactive -use by using the -.B \-o -option to the -.B set -builtin command. Other programs using this library provide -similar mechanisms. The -.I inputrc -file may be edited and re-read if a program does not provide -any other means to incorporate new bindings. -.SS Variables -.PP -Readline has variables that can be used to further customize its -behavior. A variable may be set in the -.I inputrc -file with a statement of the form -.RS -.PP -\fBset\fP \fIvariable\-name\fP \fIvalue\fP -.RE -.PP -Except where noted, readline variables can take the values -.B On -or -.B Off -(without regard to case). -Unrecognized variable names are ignored. -When a variable value is read, empty or null values, "on" (case-insensitive), -and "1" are equivalent to \fBOn\fP. All other values are equivalent to -\fBOff\fP. -The variables and their default values are: -.PP -.PD 0 -.TP -.B bell\-style (audible) -Controls what happens when readline wants to ring the terminal bell. -If set to \fBnone\fP, readline never rings the bell. If set to -\fBvisible\fP, readline uses a visible bell if one is available. -If set to \fBaudible\fP, readline attempts to ring the terminal's bell. -.TP -.B bind\-tty\-special\-chars (On) -If set to \fBOn\fP (the default), readline attempts to bind the control -characters treated specially by the kernel's terminal driver to their -readline equivalents. -.TP -.B blink\-matching\-paren (Off) -If set to \fBOn\fP, readline attempts to briefly move the cursor to an -opening parenthesis when a closing parenthesis is inserted. -.TP -.B colored\-completion\-prefix (Off) -If set to \fBOn\fP, when listing completions, readline displays the -common prefix of the set of possible completions using a different color. -The color definitions are taken from the value of the \fBLS_COLORS\fP -environment variable. -.TP -.B colored\-stats (Off) -If set to \fBOn\fP, readline displays possible completions using different -colors to indicate their file type. -The color definitions are taken from the value of the \fBLS_COLORS\fP -environment variable. -.TP -.B comment\-begin (``#'') -The string that is inserted in \fBvi\fP mode when the -.B insert\-comment -command is executed. -This command is bound to -.B M\-# -in emacs mode and to -.B # -in vi command mode. -.TP -.B completion\-display\-width (\-1) -The number of screen columns used to display possible matches -when performing completion. -The value is ignored if it is less than 0 or greater than the terminal -screen width. -A value of 0 will cause matches to be displayed one per line. -The default value is \-1. -.TP -.B completion\-ignore\-case (Off) -If set to \fBOn\fP, readline performs filename matching and completion -in a case\-insensitive fashion. -.TP -.B completion\-map\-case (Off) -If set to \fBOn\fP, and \fBcompletion\-ignore\-case\fP is enabled, readline -treats hyphens (\fI\-\fP) and underscores (\fI_\fP) as equivalent when -performing case\-insensitive filename matching and completion. -.TP -.B completion\-prefix\-display\-length (0) -The length in characters of the common prefix of a list of possible -completions that is displayed without modification. When set to a -value greater than zero, common prefixes longer than this value are -replaced with an ellipsis when displaying possible completions. -.TP -.B completion\-query\-items (100) -This determines when the user is queried about viewing -the number of possible completions -generated by the \fBpossible\-completions\fP command. -It may be set to any integer value greater than or equal to -zero. If the number of possible completions is greater than -or equal to the value of this variable, the user is asked whether -or not he wishes to view them; otherwise they are simply listed -on the terminal. A negative value causes readline to never ask. -.TP -.B convert\-meta (On) -If set to \fBOn\fP, readline will convert characters with the -eighth bit set to an ASCII key sequence -by stripping the eighth bit and prefixing it with an -escape character (in effect, using escape as the \fImeta prefix\fP). -The default is \fIOn\fP, but readline will set it to \fIOff\fP if the -locale contains eight-bit characters. -.TP -.B disable\-completion (Off) -If set to \fBOn\fP, readline will inhibit word completion. Completion -characters will be inserted into the line as if they had been -mapped to \fBself-insert\fP. -.TP -.B echo\-control\-characters (On) -When set to \fBOn\fP, on operating systems that indicate they support it, -readline echoes a character corresponding to a signal generated from the -keyboard. -.TP -.B editing\-mode (emacs) -Controls whether readline begins with a set of key bindings similar -to \fIEmacs\fP or \fIvi\fP. -.B editing\-mode -can be set to either -.B emacs -or -.BR vi . -.TP -.B emacs\-mode\-string (@) -If the \fIshow\-mode\-in\-prompt\fP variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when emacs editing mode is active. The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the \e1 and \e2 escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -.TP -.B enable\-bracketed\-paste (Off) -When set to \fBOn\fP, readline will configure the terminal in a way -that will enable it to insert each paste into the editing buffer as a -single string of characters, instead of treating each character as if -it had been read from the keyboard. This can prevent pasted characters -from being interpreted as editing commands. -.TP -.B enable\-keypad (Off) -When set to \fBOn\fP, readline will try to enable the application -keypad when it is called. Some systems need this to enable the -arrow keys. -.TP -.B enable\-meta\-key (On) -When set to \fBOn\fP, readline will try to enable any meta modifier -key the terminal claims to support when it is called. On many terminals, -the meta key is used to send eight-bit characters. -.TP -.B expand\-tilde (Off) -If set to \fBOn\fP, tilde expansion is performed when readline -attempts word completion. -.TP -.B history\-preserve\-point (Off) -If set to \fBOn\fP, the history code attempts to place point at the -same location on each history line retrieved with \fBprevious-history\fP -or \fBnext-history\fP. -.TP -.B history\-size (unset) -Set the maximum number of history entries saved in the history list. -If set to zero, any existing history entries are deleted and no new entries -are saved. -If set to a value less than zero, the number of history entries is not -limited. -By default, the number of history entries is not limited. -If an attempt is made to set \fIhistory\-size\fP to a non-numeric value, -the maximum number of history entries will be set to 500. -.TP -.B horizontal\-scroll\-mode (Off) -When set to \fBOn\fP, makes readline use a single line for display, -scrolling the input horizontally on a single screen line when it -becomes longer than the screen width rather than wrapping to a new line. -.TP -.B input\-meta (Off) -If set to \fBOn\fP, readline will enable eight-bit input (that is, -it will not clear the eighth bit in the characters it reads), -regardless of what the terminal claims it can support. The name -.B meta\-flag -is a synonym for this variable. -The default is \fIOff\fP, but readline will set it to \fIOn\fP if the -locale contains eight-bit characters. -.TP -.B isearch\-terminators (``C\-[ C\-J'') -The string of characters that should terminate an incremental -search without subsequently executing the character as a command. -If this variable has not been given a value, the characters -\fIESC\fP and \fIC\-J\fP will terminate an incremental search. -.TP -.B keymap (emacs) -Set the current readline keymap. The set of legal keymap names is -\fIemacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, -vi-command\fP, and -.IR vi-insert . -\fIvi\fP is equivalent to \fIvi-command\fP; \fIemacs\fP is -equivalent to \fIemacs-standard\fP. The default value is -.IR emacs . -The value of -.B editing\-mode -also affects the default keymap. -.TP -.B keyseq\-timeout (500) -Specifies the duration \fIreadline\fP will wait for a character when reading an -ambiguous key sequence (one that can form a complete key sequence using -the input read so far, or can take additional input to complete a longer -key sequence). -If no input is received within the timeout, \fIreadline\fP will use the shorter -but complete key sequence. -The value is specified in milliseconds, so a value of 1000 means that -\fIreadline\fP will wait one second for additional input. -If this variable is set to a value less than or equal to zero, or to a -non-numeric value, \fIreadline\fP will wait until another key is pressed to -decide which key sequence to complete. -.TP -.B mark\-directories (On) -If set to \fBOn\fP, completed directory names have a slash -appended. -.TP -.B mark\-modified\-lines (Off) -If set to \fBOn\fP, history lines that have been modified are displayed -with a preceding asterisk (\fB*\fP). -.TP -.B mark\-symlinked\-directories (Off) -If set to \fBOn\fP, completed names which are symbolic links to directories -have a slash appended (subject to the value of -\fBmark\-directories\fP). -.TP -.B match\-hidden\-files (On) -This variable, when set to \fBOn\fP, causes readline to match files whose -names begin with a `.' (hidden files) when performing filename -completion. -If set to \fBOff\fP, the leading `.' must be -supplied by the user in the filename to be completed. -.TP -.B menu\-complete\-display\-prefix (Off) -If set to \fBOn\fP, menu completion displays the common prefix of the -list of possible completions (which may be empty) before cycling through -the list. -.TP -.B output\-meta (Off) -If set to \fBOn\fP, readline will display characters with the -eighth bit set directly rather than as a meta-prefixed escape -sequence. -The default is \fIOff\fP, but readline will set it to \fIOn\fP if the -locale contains eight-bit characters. -.TP -.B page\-completions (On) -If set to \fBOn\fP, readline uses an internal \fImore\fP-like pager -to display a screenful of possible completions at a time. -.TP -.B print\-completions\-horizontally (Off) -If set to \fBOn\fP, readline will display completions with matches -sorted horizontally in alphabetical order, rather than down the screen. -.TP -.B revert\-all\-at\-newline (Off) -If set to \fBOn\fP, readline will undo all changes to history lines -before returning when \fBaccept\-line\fP is executed. By default, -history lines may be modified and retain individual undo lists across -calls to \fBreadline\fP. -.TP -.B show\-all\-if\-ambiguous (Off) -This alters the default behavior of the completion functions. If -set to -.BR On , -words which have more than one possible completion cause the -matches to be listed immediately instead of ringing the bell. -.TP -.B show\-all\-if\-unmodified (Off) -This alters the default behavior of the completion functions in -a fashion similar to \fBshow\-all\-if\-ambiguous\fP. -If set to -.BR On , -words which have more than one possible completion without any -possible partial completion (the possible completions don't share -a common prefix) cause the matches to be listed immediately instead -of ringing the bell. -.TP -.B show\-mode\-in\-prompt (Off) -If set to \fBOn\fP, add a string to the beginning of the prompt -indicating the editing mode: emacs, vi command, or vi insertion. -The mode strings are user-settable (e.g., \fIemacs\-mode\-string\fP). -.TP -.B skip\-completed\-text (Off) -If set to \fBOn\fP, this alters the default completion behavior when -inserting a single match into the line. It's only active when -performing completion in the middle of a word. If enabled, readline -does not insert characters from the completion that match characters -after point in the word being completed, so portions of the word -following the cursor are not duplicated. -.TP -.B vi\-cmd\-mode\-string ((cmd)) -If the \fIshow\-mode\-in\-prompt\fP variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when vi editing mode is active and in command mode. -The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the \e1 and \e2 escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -.TP -.B vi\-ins\-mode\-string ((ins)) -If the \fIshow\-mode\-in\-prompt\fP variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when vi editing mode is active and in insertion mode. -The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the \e1 and \e2 escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -.TP -.B visible\-stats (Off) -If set to \fBOn\fP, a character denoting a file's type as reported -by \fIstat\fP(2) is appended to the filename when listing possible -completions. -.PD -.SS Conditional Constructs -.PP -Readline implements a facility similar in spirit to the conditional -compilation features of the C preprocessor which allows key -bindings and variable settings to be performed as the result -of tests. There are four parser directives used. -.IP \fB$if\fP -The -.B $if -construct allows bindings to be made based on the -editing mode, the terminal being used, or the application using -readline. The text of the test, after any comparison operator, -extends to the end of the line; -unless otherwise noted, no characters are required to isolate it. -.RS -.IP \fBmode\fP -The \fBmode=\fP form of the \fB$if\fP directive is used to test -whether readline is in emacs or vi mode. -This may be used in conjunction -with the \fBset keymap\fP command, for instance, to set bindings in -the \fIemacs-standard\fP and \fIemacs-ctlx\fP keymaps only if -readline is starting out in emacs mode. -.IP \fBterm\fP -The \fBterm=\fP form may be used to include terminal-specific -key bindings, perhaps to bind the key sequences output by the -terminal's function keys. The word on the right side of the -.B = -is tested against the full name of the terminal and the portion -of the terminal name before the first \fB\-\fP. This allows -.I sun -to match both -.I sun -and -.IR sun\-cmd , -for instance. -.IP \fBversion\fP -The \fBversion\fP test may be used to perform comparisons against -specific readline versions. -The \fBversion\fP expands to the current readline version. -The set of comparison operators includes -.BR = , -(and -.BR == ), -.BR != , -.BR <= , -.BR >= , -.BR < , -and -.BR > . -The version number supplied on the right side of the operator consists -of a major version number, an optional decimal point, and an optional -minor version (e.g., \fB7.1\fP). If the minor version is omitted, it -is assumed to be \fB0\fP. -The operator may be separated from the string \fBversion\fP -and from the version number argument by whitespace. -.IP \fBapplication\fP -The \fBapplication\fP construct is used to include -application-specific settings. Each program using the readline -library sets the \fIapplication name\fP, and an initialization -file can test for a particular value. -This could be used to bind key sequences to functions useful for -a specific program. For instance, the following command adds a -key sequence that quotes the current or previous word in \fBbash\fP: -.sp 1 -.RS -.nf -\fB$if\fP Bash -# Quote the current or previous word -"\eC-xq": "\eeb\e"\eef\e"" -\fB$endif\fP -.fi -.RE -.IP \fIvariable\fP -The \fIvariable\fP construct provides simple equality tests for readline -variables and values. -The permitted comparison operators are \fI=\fP, \fI==\fP, and \fI!=\fP. -The variable name must be separated from the comparison operator by -whitespace; the operator may be separated from the value on the right hand -side by whitespace. -Both string and boolean variables may be tested. Boolean variables must be -tested against the values \fIon\fP and \fIoff\fP. -.RE -.IP \fB$endif\fP -This command, as seen in the previous example, terminates an -\fB$if\fP command. -.IP \fB$else\fP -Commands in this branch of the \fB$if\fP directive are executed if -the test fails. -.IP \fB$include\fP -This directive takes a single filename as an argument and reads commands -and bindings from that file. For example, the following directive -would read \fI/etc/inputrc\fP: -.sp 1 -.RS -.nf -\fB$include\fP \^ \fI/etc/inputrc\fP -.fi -.RE -.SH SEARCHING -.PP -Readline provides commands for searching through the command history -for lines containing a specified string. -There are two search modes: -.I incremental -and -.IR non-incremental . -.PP -Incremental searches begin before the user has finished typing the -search string. -As each character of the search string is typed, readline displays -the next entry from the history matching the string typed so far. -An incremental search requires only as many characters as needed to -find the desired history entry. -To search backward in the history for a particular string, type -\fBC\-r\fP. Typing \fBC\-s\fP searches forward through the history. -The characters present in the value of the \fBisearch-terminators\fP -variable are used to terminate an incremental search. -If that variable has not been assigned a value the \fIEscape\fP and -\fBC\-J\fP characters will terminate an incremental search. -\fBC\-G\fP will abort an incremental search and restore the original -line. -When the search is terminated, the history entry containing the -search string becomes the current line. -.PP -To find other matching entries in the history list, type \fBC\-s\fP or -\fBC\-r\fP as appropriate. -This will search backward or forward in the history for the next -line matching the search string typed so far. -Any other key sequence bound to a readline command will terminate -the search and execute that command. -For instance, a newline will terminate the search and accept -the line, thereby executing the command from the history list. -A movement command will terminate the search, make the last line found -the current line, and begin editing. -.PP -Non-incremental searches read the entire search string before starting -to search for matching history lines. The search string may be -typed by the user or be part of the contents of the current line. -.SH EDITING COMMANDS -.PP -The following is a list of the names of the commands and the default -key sequences to which they are bound. -Command names without an accompanying key sequence are unbound by default. -.PP -In the following descriptions, \fIpoint\fP refers to the current cursor -position, and \fImark\fP refers to a cursor position saved by the -\fBset\-mark\fP command. -The text between the point and mark is referred to as the \fIregion\fP. -.SS Commands for Moving -.PP -.PD 0 -.TP -.B beginning\-of\-line (C\-a) -Move to the start of the current line. -.TP -.B end\-of\-line (C\-e) -Move to the end of the line. -.TP -.B forward\-char (C\-f) -Move forward a character. -.TP -.B backward\-char (C\-b) -Move back a character. -.TP -.B forward\-word (M\-f) -Move forward to the end of the next word. Words are composed of -alphanumeric characters (letters and digits). -.TP -.B backward\-word (M\-b) -Move back to the start of the current or previous word. Words are -composed of alphanumeric characters (letters and digits). -.TP -.B previous\-screen\-line -Attempt to move point to the same physical screen column on the previous -physical screen line. This will not have the desired effect if the current -Readline line does not take up more than one physical line or if point is not -greater than the length of the prompt plus the screen width. -.TP -.B next\-screen\-line -Attempt to move point to the same physical screen column on the next -physical screen line. This will not have the desired effect if the current -Readline line does not take up more than one physical line or if the length -of the current Readline line is not greater than the length of the prompt -plus the screen width. -.TP -.B clear\-screen (C\-l) -Clear the screen leaving the current line at the top of the screen. -With an argument, refresh the current line without clearing the -screen. -.TP -.B redraw\-current\-line -Refresh the current line. -.PD -.SS Commands for Manipulating the History -.PP -.PD 0 -.TP -.B accept\-line (Newline, Return) -Accept the line regardless of where the cursor is. -If this line is -non-empty, it may be added to the history list for future recall with -\fBadd_history()\fP. -If the line is a modified history line, the history line is restored to its original state. -.TP -.B previous\-history (C\-p) -Fetch the previous command from the history list, moving back in -the list. -.TP -.B next\-history (C\-n) -Fetch the next command from the history list, moving forward in the -list. -.TP -.B beginning\-of\-history (M\-<) -Move to the first line in the history. -.TP -.B end\-of\-history (M\->) -Move to the end of the input history, i.e., the line currently being -entered. -.TP -.B reverse\-search\-history (C\-r) -Search backward starting at the current line and moving `up' through -the history as necessary. This is an incremental search. -.TP -.B forward\-search\-history (C\-s) -Search forward starting at the current line and moving `down' through -the history as necessary. This is an incremental search. -.TP -.B non\-incremental\-reverse\-search\-history (M\-p) -Search backward through the history starting at the current line -using a non-incremental search for a string supplied by the user. -.TP -.B non\-incremental\-forward\-search\-history (M\-n) -Search forward through the history using a non-incremental search -for a string supplied by the user. -.TP -.B history\-search\-backward -Search backward through the history for the string of characters -between the start of the current line and the current cursor -position (the \fIpoint\fP). -The search string must match at the beginning of a history line. -This is a non-incremental search. -.TP -.B history\-search\-forward -Search forward through the history for the string of characters -between the start of the current line and the point. -The search string must match at the beginning of a history line. -This is a non-incremental search. -.TP -.B history\-substring\-search\-backward -Search backward through the history for the string of characters -between the start of the current line and the current cursor -position (the \fIpoint\fP). -The search string may match anywhere in a history line. -This is a non-incremental search. -.TP -.B history\-substring\-search\-forward -Search forward through the history for the string of characters -between the start of the current line and the point. -The search string may match anywhere in a history line. -This is a non-incremental search. -.TP -.B yank\-nth\-arg (M\-C\-y) -Insert the first argument to the previous command (usually -the second word on the previous line) at point. -With an argument -.IR n , -insert the \fIn\fPth word from the previous command (the words -in the previous command begin with word 0). A negative argument -inserts the \fIn\fPth word from the end of the previous command. -Once the argument \fIn\fP is computed, the argument is extracted -as if the "!\fIn\fP" history expansion had been specified. -.TP -.B -yank\-last\-arg (M\-.\^, M\-_\^) -Insert the last argument to the previous command (the last word of -the previous history entry). -With a numeric argument, behave exactly like \fByank\-nth\-arg\fP. -Successive calls to \fByank\-last\-arg\fP move back through the history -list, inserting the last word (or the word specified by the argument to -the first call) of each line in turn. -Any numeric argument supplied to these successive calls determines -the direction to move through the history. A negative argument switches -the direction through the history (back or forward). -The history expansion facilities are used to extract the last argument, -as if the "!$" history expansion had been specified. -.PD -.SS Commands for Changing Text -.PP -.PD 0 -.TP -.B \fIend\-of\-file\fP (usually C\-d) -The character indicating end-of-file as set, for example, by -.if t \f(CWstty\fP. -.if n ``stty''. -If this character is read when there are no characters -on the line, and point is at the beginning of the line, Readline -interprets it as the end of input and returns -.SM -.BR EOF . -.TP -.B delete\-char (C\-d) -Delete the character at point. -If this function is bound to the -same character as the tty \fBEOF\fP character, as \fBC\-d\fP -commonly is, see above for the effects. -.TP -.B backward\-delete\-char (Rubout) -Delete the character behind the cursor. When given a numeric argument, -save the deleted text on the kill ring. -.TP -.B forward\-backward\-delete\-char -Delete the character under the cursor, unless the cursor is at the -end of the line, in which case the character behind the cursor is -deleted. -.TP -.B quoted\-insert (C\-q, C\-v) -Add the next character that you type to the line verbatim. This is -how to insert characters like \fBC\-q\fP, for example. -.TP -.B tab\-insert (M-TAB) -Insert a tab character. -.TP -.B self\-insert (a,\ b,\ A,\ 1,\ !,\ ...) -Insert the character typed. -.TP -.B transpose\-chars (C\-t) -Drag the character before point forward over the character at point, -moving point forward as well. -If point is at the end of the line, then this transposes -the two characters before point. -Negative arguments have no effect. -.TP -.B transpose\-words (M\-t) -Drag the word before point past the word after point, -moving point over that word as well. -If point is at the end of the line, this transposes -the last two words on the line. -.TP -.B upcase\-word (M\-u) -Uppercase the current (or following) word. With a negative argument, -uppercase the previous word, but do not move point. -.TP -.B downcase\-word (M\-l) -Lowercase the current (or following) word. With a negative argument, -lowercase the previous word, but do not move point. -.TP -.B capitalize\-word (M\-c) -Capitalize the current (or following) word. With a negative argument, -capitalize the previous word, but do not move point. -.TP -.B overwrite\-mode -Toggle overwrite mode. With an explicit positive numeric argument, -switches to overwrite mode. With an explicit non-positive numeric -argument, switches to insert mode. This command affects only -\fBemacs\fP mode; \fBvi\fP mode does overwrite differently. -Each call to \fIreadline()\fP starts in insert mode. -In overwrite mode, characters bound to \fBself\-insert\fP replace -the text at point rather than pushing the text to the right. -Characters bound to \fBbackward\-delete\-char\fP replace the character -before point with a space. By default, this command is unbound. -.PD -.SS Killing and Yanking -.PP -.PD 0 -.TP -.B kill\-line (C\-k) -Kill the text from point to the end of the line. -.TP -.B backward\-kill\-line (C\-x Rubout) -Kill backward to the beginning of the line. -.TP -.B unix\-line\-discard (C\-u) -Kill backward from point to the beginning of the line. -The killed text is saved on the kill-ring. -.\" There is no real difference between this and backward-kill-line -.TP -.B kill\-whole\-line -Kill all characters on the current line, no matter where point is. -.TP -.B kill\-word (M\-d) -Kill from point the end of the current word, or if between -words, to the end of the next word. Word boundaries are the same as -those used by \fBforward\-word\fP. -.TP -.B backward\-kill\-word (M\-Rubout) -Kill the word behind point. -Word boundaries are the same as those used by \fBbackward\-word\fP. -.TP -.B unix\-word\-rubout (C\-w) -Kill the word behind point, using white space as a word boundary. -The killed text is saved on the kill-ring. -.TP -.B unix\-filename\-rubout -Kill the word behind point, using white space and the slash character -as the word boundaries. -The killed text is saved on the kill-ring. -.TP -.B delete\-horizontal\-space (M\-\e) -Delete all spaces and tabs around point. -.TP -.B kill\-region -Kill the text between the point and \fImark\fP (saved cursor position). -This text is referred to as the \fIregion\fP. -.TP -.B copy\-region\-as\-kill -Copy the text in the region to the kill buffer. -.TP -.B copy\-backward\-word -Copy the word before point to the kill buffer. -The word boundaries are the same as \fBbackward\-word\fP. -.TP -.B copy\-forward\-word -Copy the word following point to the kill buffer. -The word boundaries are the same as \fBforward\-word\fP. -.TP -.B yank (C\-y) -Yank the top of the kill ring into the buffer at point. -.TP -.B yank\-pop (M\-y) -Rotate the kill ring, and yank the new top. Only works following -.B yank -or -.BR yank\-pop . -.PD -.SS Numeric Arguments -.PP -.PD 0 -.TP -.B digit\-argument (M\-0, M\-1, ..., M\-\-) -Add this digit to the argument already accumulating, or start a new -argument. M\-\- starts a negative argument. -.TP -.B universal\-argument -This is another way to specify an argument. -If this command is followed by one or more digits, optionally with a -leading minus sign, those digits define the argument. -If the command is followed by digits, executing -.B universal\-argument -again ends the numeric argument, but is otherwise ignored. -As a special case, if this command is immediately followed by a -character that is neither a digit or minus sign, the argument count -for the next command is multiplied by four. -The argument count is initially one, so executing this function the -first time makes the argument count four, a second time makes the -argument count sixteen, and so on. -.PD -.SS Completing -.PP -.PD 0 -.TP -.B complete (TAB) -Attempt to perform completion on the text before point. -The actual completion performed is application-specific. -.BR Bash , -for instance, attempts completion treating the text as a variable -(if the text begins with \fB$\fP), username (if the text begins with -\fB~\fP), hostname (if the text begins with \fB@\fP), or -command (including aliases and functions) in turn. If none -of these produces a match, filename completion is attempted. -.BR Gdb , -on the other hand, -allows completion of program functions and variables, and -only attempts filename completion under certain circumstances. -.TP -.B possible\-completions (M\-?) -List the possible completions of the text before point. -When displaying completions, readline sets the number of columns used -for display to the value of \fBcompletion-display-width\fP, the value of -the environment variable -.SM -.BR COLUMNS , -or the screen width, in that order. -.TP -.B insert\-completions (M\-*) -Insert all completions of the text before point -that would have been generated by -\fBpossible\-completions\fP. -.TP -.B menu\-complete -Similar to \fBcomplete\fP, but replaces the word to be completed -with a single match from the list of possible completions. -Repeated execution of \fBmenu\-complete\fP steps through the list -of possible completions, inserting each match in turn. -At the end of the list of completions, the bell is rung -(subject to the setting of \fBbell\-style\fP) -and the original text is restored. -An argument of \fIn\fP moves \fIn\fP positions forward in the list -of matches; a negative argument may be used to move backward -through the list. -This command is intended to be bound to \fBTAB\fP, but is unbound -by default. -.TP -.B menu\-complete\-backward -Identical to \fBmenu\-complete\fP, but moves backward through the list -of possible completions, as if \fBmenu\-complete\fP had been given a -negative argument. This command is unbound by default. -.TP -.B delete\-char\-or\-list -Deletes the character under the cursor if not at the beginning or -end of the line (like \fBdelete-char\fP). -If at the end of the line, behaves identically to -\fBpossible-completions\fP. -.PD -.SS Keyboard Macros -.PP -.PD 0 -.TP -.B start\-kbd\-macro (C\-x (\^) -Begin saving the characters typed into the current keyboard macro. -.TP -.B end\-kbd\-macro (C\-x )\^) -Stop saving the characters typed into the current keyboard macro -and store the definition. -.TP -.B call\-last\-kbd\-macro (C\-x e) -Re-execute the last keyboard macro defined, by making the characters -in the macro appear as if typed at the keyboard. -.TP -.B print\-last\-kbd\-macro () -Print the last keyboard macro defined in a format suitable for the -\fIinputrc\fP file. -.PD -.SS Miscellaneous -.PP -.PD 0 -.TP -.B re\-read\-init\-file (C\-x C\-r) -Read in the contents of the \fIinputrc\fP file, and incorporate -any bindings or variable assignments found there. -.TP -.B abort (C\-g) -Abort the current editing command and -ring the terminal's bell (subject to the setting of -.BR bell\-style ). -.TP -.B do\-lowercase\-version (M\-A, M\-B, M\-\fIx\fP, ...) -If the metafied character \fIx\fP is uppercase, run the command -that is bound to the corresponding metafied lowercase character. -The behavior is undefined if \fIx\fP is already lowercase. -.TP -.B prefix\-meta (ESC) -Metafy the next character typed. -.SM -.B ESC -.B f -is equivalent to -.BR Meta\-f . -.TP -.B undo (C\-_, C\-x C\-u) -Incremental undo, separately remembered for each line. -.TP -.B revert\-line (M\-r) -Undo all changes made to this line. This is like executing the -.B undo -command enough times to return the line to its initial state. -.TP -.B tilde\-expand (M\-&) -Perform tilde expansion on the current word. -.TP -.B set\-mark (C\-@, M\-) -Set the mark to the point. If a -numeric argument is supplied, the mark is set to that position. -.TP -.B exchange\-point\-and\-mark (C\-x C\-x) -Swap the point with the mark. The current cursor position is set to -the saved position, and the old cursor position is saved as the mark. -.TP -.B character\-search (C\-]) -A character is read and point is moved to the next occurrence of that -character. A negative count searches for previous occurrences. -.TP -.B character\-search\-backward (M\-C\-]) -A character is read and point is moved to the previous occurrence of that -character. A negative count searches for subsequent occurrences. -.TP -.B skip\-csi\-sequence -Read enough characters to consume a multi-key sequence such as those -defined for keys like Home and End. Such sequences begin with a -Control Sequence Indicator (CSI), usually ESC\-[. If this sequence is -bound to "\e[", keys producing such sequences will have no effect -unless explicitly bound to a readline command, instead of inserting -stray characters into the editing buffer. This is unbound by default, -but usually bound to ESC\-[. -.TP -.B insert\-comment (M\-#) -Without a numeric argument, the value of the readline -.B comment\-begin -variable is inserted at the beginning of the current line. -If a numeric argument is supplied, this command acts as a toggle: if -the characters at the beginning of the line do not match the value -of \fBcomment\-begin\fP, the value is inserted, otherwise -the characters in \fBcomment-begin\fP are deleted from the beginning of -the line. -In either case, the line is accepted as if a newline had been typed. -The default value of -.B comment\-begin -makes the current line a shell comment. -If a numeric argument causes the comment character to be removed, the line -will be executed by the shell. -.TP -.B dump\-functions -Print all of the functions and their key bindings to the -readline output stream. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an \fIinputrc\fP file. -.TP -.B dump\-variables -Print all of the settable variables and their values to the -readline output stream. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an \fIinputrc\fP file. -.TP -.B dump\-macros -Print all of the readline key sequences bound to macros and the -strings they output. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an \fIinputrc\fP file. -.TP -.B emacs\-editing\-mode (C\-e) -When in -.B vi -command mode, this causes a switch to -.B emacs -editing mode. -.TP -.B vi\-editing\-mode (M\-C\-j) -When in -.B emacs -editing mode, this causes a switch to -.B vi -editing mode. -.PD -.SH DEFAULT KEY BINDINGS -.LP -The following is a list of the default emacs and vi bindings. -Characters with the eighth bit set are written as M\-, and -are referred to as -.I metafied -characters. -The printable ASCII characters not mentioned in the list of emacs -standard bindings are bound to the -.B self\-insert -function, which just inserts the given character into the input line. -In vi insertion mode, all characters not specifically mentioned are -bound to -.BR self\-insert . -Characters assigned to signal generation by -.IR stty (1) -or the terminal driver, such as C-Z or C-C, -retain that function. -Upper and lower case metafied characters are bound to the same function in -the emacs mode meta keymap. -The remaining characters are unbound, which causes readline -to ring the bell (subject to the setting of the -.B bell\-style -variable). -.SS Emacs Mode -.RS +.6i -.nf -.ta 2.5i -.sp -Emacs Standard bindings -.sp -"C-@" set-mark -"C-A" beginning-of-line -"C-B" backward-char -"C-D" delete-char -"C-E" end-of-line -"C-F" forward-char -"C-G" abort -"C-H" backward-delete-char -"C-I" complete -"C-J" accept-line -"C-K" kill-line -"C-L" clear-screen -"C-M" accept-line -"C-N" next-history -"C-P" previous-history -"C-Q" quoted-insert -"C-R" reverse-search-history -"C-S" forward-search-history -"C-T" transpose-chars -"C-U" unix-line-discard -"C-V" quoted-insert -"C-W" unix-word-rubout -"C-Y" yank -"C-]" character-search -"C-_" undo -"\^ " to "/" self-insert -"0" to "9" self-insert -":" to "~" self-insert -"C-?" backward-delete-char -.PP -Emacs Meta bindings -.sp -"M-C-G" abort -"M-C-H" backward-kill-word -"M-C-I" tab-insert -"M-C-J" vi-editing-mode -"M-C-M" vi-editing-mode -"M-C-R" revert-line -"M-C-Y" yank-nth-arg -"M-C-[" complete -"M-C-]" character-search-backward -"M-space" set-mark -"M-#" insert-comment -"M-&" tilde-expand -"M-*" insert-completions -"M--" digit-argument -"M-." yank-last-arg -"M-0" digit-argument -"M-1" digit-argument -"M-2" digit-argument -"M-3" digit-argument -"M-4" digit-argument -"M-5" digit-argument -"M-6" digit-argument -"M-7" digit-argument -"M-8" digit-argument -"M-9" digit-argument -"M-<" beginning-of-history -"M-=" possible-completions -"M->" end-of-history -"M-?" possible-completions -"M-B" backward-word -"M-C" capitalize-word -"M-D" kill-word -"M-F" forward-word -"M-L" downcase-word -"M-N" non-incremental-forward-search-history -"M-P" non-incremental-reverse-search-history -"M-R" revert-line -"M-T" transpose-words -"M-U" upcase-word -"M-Y" yank-pop -"M-\e" delete-horizontal-space -"M-~" tilde-expand -"M-C-?" backward-kill-word -"M-_" yank-last-arg -.PP -Emacs Control-X bindings -.sp -"C-XC-G" abort -"C-XC-R" re-read-init-file -"C-XC-U" undo -"C-XC-X" exchange-point-and-mark -"C-X(" start-kbd-macro -"C-X)" end-kbd-macro -"C-XE" call-last-kbd-macro -"C-XC-?" backward-kill-line -.sp -.RE -.SS VI Mode bindings -.RS +.6i -.nf -.ta 2.5i -.sp -.PP -VI Insert Mode functions -.sp -"C-D" vi-eof-maybe -"C-H" backward-delete-char -"C-I" complete -"C-J" accept-line -"C-M" accept-line -"C-R" reverse-search-history -"C-S" forward-search-history -"C-T" transpose-chars -"C-U" unix-line-discard -"C-V" quoted-insert -"C-W" unix-word-rubout -"C-Y" yank -"C-[" vi-movement-mode -"C-_" undo -"\^ " to "~" self-insert -"C-?" backward-delete-char -.PP -VI Command Mode functions -.sp -"C-D" vi-eof-maybe -"C-E" emacs-editing-mode -"C-G" abort -"C-H" backward-char -"C-J" accept-line -"C-K" kill-line -"C-L" clear-screen -"C-M" accept-line -"C-N" next-history -"C-P" previous-history -"C-Q" quoted-insert -"C-R" reverse-search-history -"C-S" forward-search-history -"C-T" transpose-chars -"C-U" unix-line-discard -"C-V" quoted-insert -"C-W" unix-word-rubout -"C-Y" yank -"C-_" vi-undo -"\^ " forward-char -"#" insert-comment -"$" end-of-line -"%" vi-match -"&" vi-tilde-expand -"*" vi-complete -"+" next-history -"," vi-char-search -"-" previous-history -"." vi-redo -"/" vi-search -"0" beginning-of-line -"1" to "9" vi-arg-digit -";" vi-char-search -"=" vi-complete -"?" vi-search -"A" vi-append-eol -"B" vi-prev-word -"C" vi-change-to -"D" vi-delete-to -"E" vi-end-word -"F" vi-char-search -"G" vi-fetch-history -"I" vi-insert-beg -"N" vi-search-again -"P" vi-put -"R" vi-replace -"S" vi-subst -"T" vi-char-search -"U" revert-line -"W" vi-next-word -"X" backward-delete-char -"Y" vi-yank-to -"\e" vi-complete -"^" vi-first-print -"_" vi-yank-arg -"`" vi-goto-mark -"a" vi-append-mode -"b" vi-prev-word -"c" vi-change-to -"d" vi-delete-to -"e" vi-end-word -"f" vi-char-search -"h" backward-char -"i" vi-insertion-mode -"j" next-history -"k" prev-history -"l" forward-char -"m" vi-set-mark -"n" vi-search-again -"p" vi-put -"r" vi-change-char -"s" vi-subst -"t" vi-char-search -"u" vi-undo -"w" vi-next-word -"x" vi-delete -"y" vi-yank-to -"|" vi-column -"~" vi-change-case -.RE -.SH "SEE ALSO" -.PD 0 -.TP -\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey -.TP -\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey -.TP -\fIbash\fP(1) -.PD -.SH FILES -.PD 0 -.TP -.FN ~/.inputrc -Individual \fBreadline\fP initialization file -.PD -.SH AUTHORS -Brian Fox, Free Software Foundation -.br -bfox@gnu.org -.PP -Chet Ramey, Case Western Reserve University -.br -chet.ramey@case.edu -.SH BUG REPORTS -If you find a bug in -.B readline, -you should report it. But first, you should -make sure that it really is a bug, and that it appears in the latest -version of the -.B readline -library that you have. -.PP -Once you have determined that a bug actually exists, mail a -bug report to \fIbug\-readline\fP@\fIgnu.org\fP. -If you have a fix, you are welcome to mail that -as well! Suggestions and `philosophical' bug reports may be mailed -to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet -newsgroup -.BR gnu.bash.bug . -.PP -Comments and bug reports concerning -this manual page should be directed to -.IR chet.ramey@case.edu . -.SH BUGS -.PP -It's too big and too slow. diff --git a/readline/doc/rlman.texi b/readline/doc/rlman.texi deleted file mode 100644 index 737f971ddd..0000000000 --- a/readline/doc/rlman.texi +++ /dev/null @@ -1,84 +0,0 @@ -\input texinfo @c -*-texinfo-*- -@comment %**start of header (This is for running Texinfo on a region.) -@setfilename readline.info -@settitle GNU Readline Library -@include version.texi - -@comment %**end of header (This is for running Texinfo on a region.) -@synindex vr fn - -@copying -This manual describes the GNU Readline Library -(version @value{VERSION}, @value{UPDATED}), a library which aids in the -consistency of user interface across discrete programs which provide -a command line interface. - -Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. - -@quotation -Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.3 or -any later version published by the Free Software Foundation; with no -Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. -A copy of the license is included in the section entitled -``GNU Free Documentation License''. - -@end quotation -@end copying - -@dircategory Libraries -@direntry -* Readline: (readline). The GNU readline library API. -@end direntry - -@titlepage -@title GNU Readline Library -@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}. -@subtitle @value{UPDATED-MONTH} -@author Chet Ramey, Case Western Reserve University -@author Brian Fox, Free Software Foundation - -@page -@vskip 0pt plus 1filll -@insertcopying - -@end titlepage - -@contents - -@ifnottex -@node Top -@top GNU Readline Library - -This document describes the GNU Readline Library, a utility which aids -in the consistency of user interface across discrete programs which -provide a command line interface. -The Readline home page is @url{http://www.gnu.org/software/readline/}. - -@menu -* Command Line Editing:: GNU Readline User's Manual. -* Programming with GNU Readline:: GNU Readline Programmer's Manual. -* GNU Free Documentation License:: License for copying this manual. -* Concept Index:: Index of concepts described in this manual. -* Function and Variable Index:: Index of externally visible functions - and variables. -@end menu -@end ifnottex - -@include rluser.texi -@include rltech.texi - -@node GNU Free Documentation License -@appendix GNU Free Documentation License - -@include fdl.texi - -@node Concept Index -@unnumbered Concept Index -@printindex cp - -@node Function and Variable Index -@unnumbered Function and Variable Index -@printindex fn - -@bye diff --git a/readline/doc/rltech.texi b/readline/doc/rltech.texi deleted file mode 100644 index 28a02d9960..0000000000 --- a/readline/doc/rltech.texi +++ /dev/null @@ -1,2731 +0,0 @@ -@comment %**start of header (This is for running Texinfo on a region.) -@setfilename rltech.info -@comment %**end of header (This is for running Texinfo on a region.) - -@ifinfo -This document describes the GNU Readline Library, a utility for aiding -in the consistency of user interface across discrete programs that need -to provide a command line interface. - -Copyright (C) 1988--2016 Free Software Foundation, Inc. - -Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -pare preserved on all copies. - -@ignore -Permission is granted to process this file through TeX and print the -results, provided the printed document carries copying permission -notice identical to this one except for the removal of this paragraph -(this paragraph not being relevant to the printed manual). -@end ignore - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation approved -by the Foundation. -@end ifinfo - -@node Programming with GNU Readline -@chapter Programming with GNU Readline - -This chapter describes the interface between the @sc{gnu} Readline Library and -other programs. If you are a programmer, and you wish to include the -features found in @sc{gnu} Readline -such as completion, line editing, and interactive history manipulation -in your own programs, this section is for you. - -@menu -* Basic Behavior:: Using the default behavior of Readline. -* Custom Functions:: Adding your own functions to Readline. -* Readline Variables:: Variables accessible to custom - functions. -* Readline Convenience Functions:: Functions which Readline supplies to - aid in writing your own custom - functions. -* Readline Signal Handling:: How Readline behaves when it receives signals. -* Custom Completers:: Supplanting or supplementing Readline's - completion functions. -@end menu - -@node Basic Behavior -@section Basic Behavior - -Many programs provide a command line interface, such as @code{mail}, -@code{ftp}, and @code{sh}. For such programs, the default behaviour of -Readline is sufficient. This section describes how to use Readline in -the simplest way possible, perhaps to replace calls in your code to -@code{gets()} or @code{fgets()}. - -@findex readline -@cindex readline, function - -The function @code{readline()} prints a prompt @var{prompt} -and then reads and returns a single line of text from the user. -If @var{prompt} is @code{NULL} or the empty string, no prompt is displayed. -The line @code{readline} returns is allocated with @code{malloc()}; -the caller should @code{free()} the line when it has finished with it. -The declaration for @code{readline} in ANSI C is - -@example -@code{char *readline (const char *@var{prompt});} -@end example - -@noindent -So, one might say -@example -@code{char *line = readline ("Enter a line: ");} -@end example -@noindent -in order to read a line of text from the user. -The line returned has the final newline removed, so only the -text remains. - -If @code{readline} encounters an @code{EOF} while reading the line, and the -line is empty at that point, then @code{(char *)NULL} is returned. -Otherwise, the line is ended just as if a newline had been typed. - -Readline performs some expansion on the @var{prompt} before it is -displayed on the screen. See the description of @code{rl_expand_prompt} -(@pxref{Redisplay}) for additional details, especially if @var{prompt} -will contain characters that do not consume physical screen space when -displayed. - -If you want the user to be able to get at the line later, (with -@key{C-p} for example), you must call @code{add_history()} to save the -line away in a @dfn{history} list of such lines. - -@example -@code{add_history (line)}; -@end example - -@noindent -For full details on the GNU History Library, see the associated manual. - -It is preferable to avoid saving empty lines on the history list, since -users rarely have a burning need to reuse a blank line. Here is -a function which usefully replaces the standard @code{gets()} library -function, and has the advantage of no static buffer to overflow: - -@example -/* A static variable for holding the line. */ -static char *line_read = (char *)NULL; - -/* Read a string, and return a pointer to it. - Returns NULL on EOF. */ -char * -rl_gets () -@{ - /* If the buffer has already been allocated, - return the memory to the free pool. */ - if (line_read) - @{ - free (line_read); - line_read = (char *)NULL; - @} - - /* Get a line from the user. */ - line_read = readline (""); - - /* If the line has any text in it, - save it on the history. */ - if (line_read && *line_read) - add_history (line_read); - - return (line_read); -@} -@end example - -This function gives the user the default behaviour of @key{TAB} -completion: completion on file names. If you do not want Readline to -complete on filenames, you can change the binding of the @key{TAB} key -with @code{rl_bind_key()}. - -@example -@code{int rl_bind_key (int @var{key}, rl_command_func_t *@var{function});} -@end example - -@code{rl_bind_key()} takes two arguments: @var{key} is the character that -you want to bind, and @var{function} is the address of the function to -call when @var{key} is pressed. Binding @key{TAB} to @code{rl_insert()} -makes @key{TAB} insert itself. -@code{rl_bind_key()} returns non-zero if @var{key} is not a valid -ASCII character code (between 0 and 255). - -Thus, to disable the default @key{TAB} behavior, the following suffices: -@example -@code{rl_bind_key ('\t', rl_insert);} -@end example - -This code should be executed once at the start of your program; you -might write a function called @code{initialize_readline()} which -performs this and other desired initializations, such as installing -custom completers (@pxref{Custom Completers}). - -@node Custom Functions -@section Custom Functions - -Readline provides many functions for manipulating the text of -the line, but it isn't possible to anticipate the needs of all -programs. This section describes the various functions and variables -defined within the Readline library which allow a user program to add -customized functionality to Readline. - -Before declaring any functions that customize Readline's behavior, or -using any functionality Readline provides in other code, an -application writer should include the file @code{} -in any file that uses Readline's features. Since some of the definitions -in @code{readline.h} use the @code{stdio} library, the file -@code{} should be included before @code{readline.h}. - -@code{readline.h} defines a C preprocessor variable that should -be treated as an integer, @code{RL_READLINE_VERSION}, which may -be used to conditionally compile application code depending on -the installed Readline version. The value is a hexadecimal -encoding of the major and minor version numbers of the library, -of the form 0x@var{MMmm}. @var{MM} is the two-digit major -version number; @var{mm} is the two-digit minor version number. -For Readline 4.2, for example, the value of -@code{RL_READLINE_VERSION} would be @code{0x0402}. - -@menu -* Readline Typedefs:: C declarations to make code readable. -* Function Writing:: Variables and calling conventions. -@end menu - -@node Readline Typedefs -@subsection Readline Typedefs - -For readability, we declare a number of new object types, all pointers -to functions. - -The reason for declaring these new types is to make it easier to write -code describing pointers to C functions with appropriately prototyped -arguments and return values. - -For instance, say we want to declare a variable @var{func} as a pointer -to a function which takes two @code{int} arguments and returns an -@code{int} (this is the type of all of the Readline bindable functions). -Instead of the classic C declaration - -@code{int (*func)();} - -@noindent -or the ANSI-C style declaration - -@code{int (*func)(int, int);} - -@noindent -we may write - -@code{rl_command_func_t *func;} - -The full list of function pointer types available is - -@table @code -@item typedef int rl_command_func_t (int, int); - -@item typedef char *rl_compentry_func_t (const char *, int); - -@item typedef char **rl_completion_func_t (const char *, int, int); - -@item typedef char *rl_quote_func_t (char *, int, char *); - -@item typedef char *rl_dequote_func_t (char *, int); - -@item typedef int rl_compignore_func_t (char **); - -@item typedef void rl_compdisp_func_t (char **, int, int); - -@item typedef int rl_hook_func_t (void); - -@item typedef int rl_getc_func_t (FILE *); - -@item typedef int rl_linebuf_func_t (char *, int); - -@item typedef int rl_intfunc_t (int); -@item #define rl_ivoidfunc_t rl_hook_func_t -@item typedef int rl_icpfunc_t (char *); -@item typedef int rl_icppfunc_t (char **); - -@item typedef void rl_voidfunc_t (void); -@item typedef void rl_vintfunc_t (int); -@item typedef void rl_vcpfunc_t (char *); -@item typedef void rl_vcppfunc_t (char **); - -@end table - -@node Function Writing -@subsection Writing a New Function - -In order to write new functions for Readline, you need to know the -calling conventions for keyboard-invoked functions, and the names of the -variables that describe the current state of the line read so far. - -The calling sequence for a command @code{foo} looks like - -@example -@code{int foo (int count, int key)} -@end example - -@noindent -where @var{count} is the numeric argument (or 1 if defaulted) and -@var{key} is the key that invoked this function. - -It is completely up to the function as to what should be done with the -numeric argument. Some functions use it as a repeat count, some -as a flag, and others to choose alternate behavior (refreshing the current -line as opposed to refreshing the screen, for example). Some choose to -ignore it. In general, if a -function uses the numeric argument as a repeat count, it should be able -to do something useful with both negative and positive arguments. -At the very least, it should be aware that it can be passed a -negative argument. - -A command function should return 0 if its action completes successfully, -and a value greater than zero if some error occurs. -This is the convention obeyed by all of the builtin Readline bindable -command functions. - -@node Readline Variables -@section Readline Variables - -These variables are available to function writers. - -@deftypevar {char *} rl_line_buffer -This is the line gathered so far. You are welcome to modify the -contents of the line, but see @ref{Allowing Undoing}. The -function @code{rl_extend_line_buffer} is available to increase -the memory allocated to @code{rl_line_buffer}. -@end deftypevar - -@deftypevar int rl_point -The offset of the current cursor position in @code{rl_line_buffer} -(the @emph{point}). -@end deftypevar - -@deftypevar int rl_end -The number of characters present in @code{rl_line_buffer}. When -@code{rl_point} is at the end of the line, @code{rl_point} and -@code{rl_end} are equal. -@end deftypevar - -@deftypevar int rl_mark -The @var{mark} (saved position) in the current line. If set, the mark -and point define a @emph{region}. -@end deftypevar - -@deftypevar int rl_done -Setting this to a non-zero value causes Readline to return the current -line immediately. -@end deftypevar - -@deftypevar int rl_num_chars_to_read -Setting this to a positive value before calling @code{readline()} causes -Readline to return after accepting that many characters, rather -than reading up to a character bound to @code{accept-line}. -@end deftypevar - -@deftypevar int rl_pending_input -Setting this to a value makes it the next keystroke read. This is a -way to stuff a single character into the input stream. -@end deftypevar - -@deftypevar int rl_dispatching -Set to a non-zero value if a function is being called from a key binding; -zero otherwise. Application functions can test this to discover whether -they were called directly or by Readline's dispatching mechanism. -@end deftypevar - -@deftypevar int rl_erase_empty_line -Setting this to a non-zero value causes Readline to completely erase -the current line, including any prompt, any time a newline is typed as -the only character on an otherwise-empty line. The cursor is moved to -the beginning of the newly-blank line. -@end deftypevar - -@deftypevar {char *} rl_prompt -The prompt Readline uses. This is set from the argument to -@code{readline()}, and should not be assigned to directly. -The @code{rl_set_prompt()} function (@pxref{Redisplay}) may -be used to modify the prompt string after calling @code{readline()}. -@end deftypevar - -@deftypevar {char *} rl_display_prompt -The string displayed as the prompt. This is usually identical to -@var{rl_prompt}, but may be changed temporarily by functions that -use the prompt string as a message area, such as incremental search. -@end deftypevar - -@deftypevar int rl_already_prompted -If an application wishes to display the prompt itself, rather than have -Readline do it the first time @code{readline()} is called, it should set -this variable to a non-zero value after displaying the prompt. -The prompt must also be passed as the argument to @code{readline()} so -the redisplay functions can update the display properly. -The calling application is responsible for managing the value; Readline -never sets it. -@end deftypevar - -@deftypevar {const char *} rl_library_version -The version number of this revision of the library. -@end deftypevar - -@deftypevar int rl_readline_version -An integer encoding the current version of the library. The encoding is -of the form 0x@var{MMmm}, where @var{MM} is the two-digit major version -number, and @var{mm} is the two-digit minor version number. -For example, for Readline-4.2, @code{rl_readline_version} would have the -value 0x0402. -@end deftypevar - -@deftypevar {int} rl_gnu_readline_p -Always set to 1, denoting that this is @sc{gnu} readline rather than some -emulation. -@end deftypevar - -@deftypevar {const char *} rl_terminal_name -The terminal type, used for initialization. If not set by the application, -Readline sets this to the value of the @env{TERM} environment variable -the first time it is called. -@end deftypevar - -@deftypevar {const char *} rl_readline_name -This variable is set to a unique name by each application using Readline. -The value allows conditional parsing of the inputrc file -(@pxref{Conditional Init Constructs}). -@end deftypevar - -@deftypevar {FILE *} rl_instream -The stdio stream from which Readline reads input. -If @code{NULL}, Readline defaults to @var{stdin}. -@end deftypevar - -@deftypevar {FILE *} rl_outstream -The stdio stream to which Readline performs output. -If @code{NULL}, Readline defaults to @var{stdout}. -@end deftypevar - -@deftypevar int rl_prefer_env_winsize -If non-zero, Readline gives values found in the @env{LINES} and -@env{COLUMNS} environment variables greater precedence than values fetched -from the kernel when computing the screen dimensions. -@end deftypevar - -@deftypevar {rl_command_func_t *} rl_last_func -The address of the last command function Readline executed. May be used to -test whether or not a function is being executed twice in succession, for -example. -@end deftypevar - -@deftypevar {rl_hook_func_t *} rl_startup_hook -If non-zero, this is the address of a function to call just -before @code{readline} prints the first prompt. -@end deftypevar - -@deftypevar {rl_hook_func_t *} rl_pre_input_hook -If non-zero, this is the address of a function to call after -the first prompt has been printed and just before @code{readline} -starts reading input characters. -@end deftypevar - -@deftypevar {rl_hook_func_t *} rl_event_hook -If non-zero, this is the address of a function to call periodically -when Readline is waiting for terminal input. -By default, this will be called at most ten times a second if there -is no keyboard input. -@end deftypevar - -@deftypevar {rl_getc_func_t *} rl_getc_function -If non-zero, Readline will call indirectly through this pointer -to get a character from the input stream. By default, it is set to -@code{rl_getc}, the default Readline character input function -(@pxref{Character Input}). -In general, an application that sets @var{rl_getc_function} should consider -setting @var{rl_input_available_hook} as well. -@end deftypevar - -@deftypevar {rl_hook_func_t *} rl_signal_event_hook -If non-zero, this is the address of a function to call if a read system -call is interrupted when Readline is reading terminal input. -@end deftypevar - -@deftypevar {rl_hook_func_t *} rl_input_available_hook -If non-zero, Readline will use this function's return value when it needs -to determine whether or not there is available input on the current input -source. -The default hook checks @code{rl_instream}; if an application is using a -different input source, it should set the hook appropriately. -Readline queries for available input when implementing intra-key-sequence -timeouts during input and incremental searches. -This may use an application-specific timeout before returning a value; -Readline uses the value passed to @code{rl_set_keyboard_input_timeout()} -or the value of the user-settable @var{keyseq-timeout} variable. -This is designed for use by applications using Readline's callback interface -(@pxref{Alternate Interface}), which may not use the traditional -@code{read(2)} and file descriptor interface, or other applications using -a different input mechanism. -If an application uses an input mechanism or hook that can potentially exceed -the value of @var{keyseq-timeout}, it should increase the timeout or set -this hook appropriately even when not using the callback interface. -In general, an application that sets @var{rl_getc_function} should consider -setting @var{rl_input_available_hook} as well. -@end deftypevar - -@deftypevar {rl_voidfunc_t *} rl_redisplay_function -If non-zero, Readline will call indirectly through this pointer -to update the display with the current contents of the editing buffer. -By default, it is set to @code{rl_redisplay}, the default Readline -redisplay function (@pxref{Redisplay}). -@end deftypevar - -@deftypevar {rl_vintfunc_t *} rl_prep_term_function -If non-zero, Readline will call indirectly through this pointer -to initialize the terminal. The function takes a single argument, an -@code{int} flag that says whether or not to use eight-bit characters. -By default, this is set to @code{rl_prep_terminal} -(@pxref{Terminal Management}). -@end deftypevar - -@deftypevar {rl_voidfunc_t *} rl_deprep_term_function -If non-zero, Readline will call indirectly through this pointer -to reset the terminal. This function should undo the effects of -@code{rl_prep_term_function}. -By default, this is set to @code{rl_deprep_terminal} -(@pxref{Terminal Management}). -@end deftypevar - -@deftypevar {Keymap} rl_executing_keymap -This variable is set to the keymap (@pxref{Keymaps}) in which the -currently executing readline function was found. -@end deftypevar - -@deftypevar {Keymap} rl_binding_keymap -This variable is set to the keymap (@pxref{Keymaps}) in which the -last key binding occurred. -@end deftypevar - -@deftypevar {char *} rl_executing_macro -This variable is set to the text of any currently-executing macro. -@end deftypevar - -@deftypevar int rl_executing_key -The key that caused the dispatch to the currently-executing Readline function. -@end deftypevar - -@deftypevar {char *} rl_executing_keyseq -The full key sequence that caused the dispatch to the currently-executing -Readline function. -@end deftypevar - -@deftypevar int rl_key_sequence_length -The number of characters in @var{rl_executing_keyseq}. -@end deftypevar - -@deftypevar {int} rl_readline_state -A variable with bit values that encapsulate the current Readline state. -A bit is set with the @code{RL_SETSTATE} macro, and unset with the -@code{RL_UNSETSTATE} macro. Use the @code{RL_ISSTATE} macro to test -whether a particular state bit is set. Current state bits include: - -@table @code -@item RL_STATE_NONE -Readline has not yet been called, nor has it begun to initialize. -@item RL_STATE_INITIALIZING -Readline is initializing its internal data structures. -@item RL_STATE_INITIALIZED -Readline has completed its initialization. -@item RL_STATE_TERMPREPPED -Readline has modified the terminal modes to do its own input and redisplay. -@item RL_STATE_READCMD -Readline is reading a command from the keyboard. -@item RL_STATE_METANEXT -Readline is reading more input after reading the meta-prefix character. -@item RL_STATE_DISPATCHING -Readline is dispatching to a command. -@item RL_STATE_MOREINPUT -Readline is reading more input while executing an editing command. -@item RL_STATE_ISEARCH -Readline is performing an incremental history search. -@item RL_STATE_NSEARCH -Readline is performing a non-incremental history search. -@item RL_STATE_SEARCH -Readline is searching backward or forward through the history for a string. -@item RL_STATE_NUMERICARG -Readline is reading a numeric argument. -@item RL_STATE_MACROINPUT -Readline is currently getting its input from a previously-defined keyboard -macro. -@item RL_STATE_MACRODEF -Readline is currently reading characters defining a keyboard macro. -@item RL_STATE_OVERWRITE -Readline is in overwrite mode. -@item RL_STATE_COMPLETING -Readline is performing word completion. -@item RL_STATE_SIGHANDLER -Readline is currently executing the readline signal handler. -@item RL_STATE_UNDOING -Readline is performing an undo. -@item RL_STATE_INPUTPENDING -Readline has input pending due to a call to @code{rl_execute_next()}. -@item RL_STATE_TTYCSAVED -Readline has saved the values of the terminal's special characters. -@item RL_STATE_CALLBACK -Readline is currently using the alternate (callback) interface -(@pxref{Alternate Interface}). -@item RL_STATE_VIMOTION -Readline is reading the argument to a vi-mode "motion" command. -@item RL_STATE_MULTIKEY -Readline is reading a multiple-keystroke command. -@item RL_STATE_VICMDONCE -Readline has entered vi command (movement) mode at least one time during -the current call to @code{readline()}. -@item RL_STATE_DONE -Readline has read a key sequence bound to @code{accept-line} -and is about to return the line to the caller. -@end table - -@end deftypevar - -@deftypevar {int} rl_explicit_arg -Set to a non-zero value if an explicit numeric argument was specified by -the user. Only valid in a bindable command function. -@end deftypevar - -@deftypevar {int} rl_numeric_arg -Set to the value of any numeric argument explicitly specified by the user -before executing the current Readline function. Only valid in a bindable -command function. -@end deftypevar - -@deftypevar {int} rl_editing_mode -Set to a value denoting Readline's current editing mode. A value of -@var{1} means Readline is currently in emacs mode; @var{0} -means that vi mode is active. -@end deftypevar - - -@node Readline Convenience Functions -@section Readline Convenience Functions - -@menu -* Function Naming:: How to give a function you write a name. -* Keymaps:: Making keymaps. -* Binding Keys:: Changing Keymaps. -* Associating Function Names and Bindings:: Translate function names to - key sequences. -* Allowing Undoing:: How to make your functions undoable. -* Redisplay:: Functions to control line display. -* Modifying Text:: Functions to modify @code{rl_line_buffer}. -* Character Input:: Functions to read keyboard input. -* Terminal Management:: Functions to manage terminal settings. -* Utility Functions:: Generally useful functions and hooks. -* Miscellaneous Functions:: Functions that don't fall into any category. -* Alternate Interface:: Using Readline in a `callback' fashion. -* A Readline Example:: An example Readline function. -* Alternate Interface Example:: An example program using the alternate interface. -@end menu - -@node Function Naming -@subsection Naming a Function - -The user can dynamically change the bindings of keys while using -Readline. This is done by representing the function with a descriptive -name. The user is able to type the descriptive name when referring to -the function. Thus, in an init file, one might find - -@example -Meta-Rubout: backward-kill-word -@end example - -This binds the keystroke @key{Meta-Rubout} to the function -@emph{descriptively} named @code{backward-kill-word}. You, as the -programmer, should bind the functions you write to descriptive names as -well. Readline provides a function for doing that: - -@deftypefun int rl_add_defun (const char *name, rl_command_func_t *function, int key) -Add @var{name} to the list of named functions. Make @var{function} be -the function that gets called. If @var{key} is not -1, then bind it to -@var{function} using @code{rl_bind_key()}. -@end deftypefun - -Using this function alone is sufficient for most applications. -It is the recommended way to add a few functions to the default -functions that Readline has built in. -If you need to do something other than adding a function to Readline, -you may need to use the underlying functions described below. - -@node Keymaps -@subsection Selecting a Keymap - -Key bindings take place on a @dfn{keymap}. The keymap is the -association between the keys that the user types and the functions that -get run. You can make your own keymaps, copy existing keymaps, and tell -Readline which keymap to use. - -@deftypefun Keymap rl_make_bare_keymap (void) -Returns a new, empty keymap. The space for the keymap is allocated with -@code{malloc()}; the caller should free it by calling -@code{rl_free_keymap()} when done. -@end deftypefun - -@deftypefun Keymap rl_copy_keymap (Keymap map) -Return a new keymap which is a copy of @var{map}. -@end deftypefun - -@deftypefun Keymap rl_make_keymap (void) -Return a new keymap with the printing characters bound to rl_insert, -the lowercase Meta characters bound to run their equivalents, and -the Meta digits bound to produce numeric arguments. -@end deftypefun - -@deftypefun void rl_discard_keymap (Keymap keymap) -Free the storage associated with the data in @var{keymap}. -The caller should free @var{keymap}. -@end deftypefun - -@deftypefun void rl_free_keymap (Keymap keymap) -Free all storage associated with @var{keymap}. This calls -@code{rl_discard_keymap} to free subordindate keymaps and macros. -@end deftypefun - -@deftypefun int rl_empty_keymap (Keymap keymap) -Return non-zero if there are no keys bound to functions in @var{keymap}; -zero if there are any keys bound. -@end deftypefun - -Readline has several internal keymaps. These functions allow you to -change which keymap is active. - -@deftypefun Keymap rl_get_keymap (void) -Returns the currently active keymap. -@end deftypefun - -@deftypefun void rl_set_keymap (Keymap keymap) -Makes @var{keymap} the currently active keymap. -@end deftypefun - -@deftypefun Keymap rl_get_keymap_by_name (const char *name) -Return the keymap matching @var{name}. @var{name} is one which would -be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). -@end deftypefun - -@deftypefun {char *} rl_get_keymap_name (Keymap keymap) -Return the name matching @var{keymap}. @var{name} is one which would -be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). -@end deftypefun - -@deftypefun int rl_set_keymap_name (const char *name, Keymap keymap) -Set the name of @var{keymap}. This name will then be "registered" and -available for use in a @code{set keymap} inputrc directive -@pxref{Readline Init File}). -The @var{name} may not be one of Readline's builtin keymap names; -you may not add a different name for one of Readline's builtin keymaps. -You may replace the name associated with a given keymap by calling this -function more than once with the same @var{keymap} argument. -You may associate a registered @var{name} with a new keymap by calling this -function more than once with the same @var{name} argument. -There is no way to remove a named keymap once the name has been -registered. -Readline will make a copy of @var{name}. -The return value is greater than zero unless @var{name} is one of -Readline's builtin keymap names or @var{keymap} is one of Readline's -builtin keymaps. -@end deftypefun - -@node Binding Keys -@subsection Binding Keys - -Key sequences are associate with functions through the keymap. -Readline has several internal keymaps: @code{emacs_standard_keymap}, -@code{emacs_meta_keymap}, @code{emacs_ctlx_keymap}, -@code{vi_movement_keymap}, and @code{vi_insertion_keymap}. -@code{emacs_standard_keymap} is the default, and the examples in -this manual assume that. - -Since @code{readline()} installs a set of default key bindings the first -time it is called, there is always the danger that a custom binding -installed before the first call to @code{readline()} will be overridden. -An alternate mechanism is to install custom key bindings in an -initialization function assigned to the @code{rl_startup_hook} variable -(@pxref{Readline Variables}). - -These functions manage key bindings. - -@deftypefun int rl_bind_key (int key, rl_command_func_t *function) -Binds @var{key} to @var{function} in the currently active keymap. -Returns non-zero in the case of an invalid @var{key}. -@end deftypefun - -@deftypefun int rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map) -Bind @var{key} to @var{function} in @var{map}. -Returns non-zero in the case of an invalid @var{key}. -@end deftypefun - -@deftypefun int rl_bind_key_if_unbound (int key, rl_command_func_t *function) -Binds @var{key} to @var{function} if it is not already bound in the -currently active keymap. -Returns non-zero in the case of an invalid @var{key} or if @var{key} is -already bound. -@end deftypefun - -@deftypefun int rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *function, Keymap map) -Binds @var{key} to @var{function} if it is not already bound in @var{map}. -Returns non-zero in the case of an invalid @var{key} or if @var{key} is -already bound. -@end deftypefun - -@deftypefun int rl_unbind_key (int key) -Bind @var{key} to the null function in the currently active keymap. -Returns non-zero in case of error. -@end deftypefun - -@deftypefun int rl_unbind_key_in_map (int key, Keymap map) -Bind @var{key} to the null function in @var{map}. -Returns non-zero in case of error. -@end deftypefun - -@deftypefun int rl_unbind_function_in_map (rl_command_func_t *function, Keymap map) -Unbind all keys that execute @var{function} in @var{map}. -@end deftypefun - -@deftypefun int rl_unbind_command_in_map (const char *command, Keymap map) -Unbind all keys that are bound to @var{command} in @var{map}. -@end deftypefun - -@deftypefun int rl_bind_keyseq (const char *keyseq, rl_command_func_t *function) -Bind the key sequence represented by the string @var{keyseq} to the function -@var{function}, beginning in the current keymap. -This makes new keymaps as necessary. -The return value is non-zero if @var{keyseq} is invalid. -@end deftypefun - -@deftypefun int rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) -Bind the key sequence represented by the string @var{keyseq} to the function -@var{function}. This makes new keymaps as necessary. -Initial bindings are performed in @var{map}. -The return value is non-zero if @var{keyseq} is invalid. -@end deftypefun - -@deftypefun int rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map) -Equivalent to @code{rl_bind_keyseq_in_map}. -@end deftypefun - -@deftypefun int rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *function) -Binds @var{keyseq} to @var{function} if it is not already bound in the -currently active keymap. -Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is -already bound. -@end deftypefun - -@deftypefun int rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) -Binds @var{keyseq} to @var{function} if it is not already bound in @var{map}. -Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is -already bound. -@end deftypefun - -@deftypefun int rl_generic_bind (int type, const char *keyseq, char *data, Keymap map) -Bind the key sequence represented by the string @var{keyseq} to the arbitrary -pointer @var{data}. @var{type} says what kind of data is pointed to by -@var{data}; this can be a function (@code{ISFUNC}), a macro -(@code{ISMACR}), or a keymap (@code{ISKMAP}). This makes new keymaps as -necessary. The initial keymap in which to do bindings is @var{map}. -@end deftypefun - -@deftypefun int rl_parse_and_bind (char *line) -Parse @var{line} as if it had been read from the @code{inputrc} file and -perform any key bindings and variable assignments found -(@pxref{Readline Init File}). -@end deftypefun - -@deftypefun int rl_read_init_file (const char *filename) -Read keybindings and variable assignments from @var{filename} -(@pxref{Readline Init File}). -@end deftypefun - -@node Associating Function Names and Bindings -@subsection Associating Function Names and Bindings - -These functions allow you to find out what keys invoke named functions -and the functions invoked by a particular key sequence. You may also -associate a new function name with an arbitrary function. - -@deftypefun {rl_command_func_t *} rl_named_function (const char *name) -Return the function with name @var{name}. -@end deftypefun - -@deftypefun {rl_command_func_t *} rl_function_of_keyseq (const char *keyseq, Keymap map, int *type) -Return the function invoked by @var{keyseq} in keymap @var{map}. -If @var{map} is @code{NULL}, the current keymap is used. If @var{type} is -not @code{NULL}, the type of the object is returned in the @code{int} variable -it points to (one of @code{ISFUNC}, @code{ISKMAP}, or @code{ISMACR}). -It takes a "translated" key sequence and should not be used if the key sequence -can include NUL. -@end deftypefun - -@deftypefun {rl_command_func_t *} rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) -Return the function invoked by @var{keyseq} of length @var{len} -in keymap @var{map}. Equivalent to @code{rl_function_of_keyseq} with the -addition of the @var{len} parameter. -It takes a "translated" key sequence and should be used if the key sequence -can include NUL. -@end deftypefun - -@deftypefun {char **} rl_invoking_keyseqs (rl_command_func_t *function) -Return an array of strings representing the key sequences used to -invoke @var{function} in the current keymap. -@end deftypefun - -@deftypefun {char **} rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map) -Return an array of strings representing the key sequences used to -invoke @var{function} in the keymap @var{map}. -@end deftypefun - -@deftypefun void rl_function_dumper (int readable) -Print the readline function names and the key sequences currently -bound to them to @code{rl_outstream}. If @var{readable} is non-zero, -the list is formatted in such a way that it can be made part of an -@code{inputrc} file and re-read. -@end deftypefun - -@deftypefun void rl_list_funmap_names (void) -Print the names of all bindable Readline functions to @code{rl_outstream}. -@end deftypefun - -@deftypefun {const char **} rl_funmap_names (void) -Return a NULL terminated array of known function names. The array is -sorted. The array itself is allocated, but not the strings inside. You -should free the array, but not the pointers, using @code{free} or -@code{rl_free} when you are done. -@end deftypefun - -@deftypefun int rl_add_funmap_entry (const char *name, rl_command_func_t *function) -Add @var{name} to the list of bindable Readline command names, and make -@var{function} the function to be called when @var{name} is invoked. -@end deftypefun - -@node Allowing Undoing -@subsection Allowing Undoing - -Supporting the undo command is a painless thing, and makes your -functions much more useful. It is certainly easy to try -something if you know you can undo it. - -If your function simply inserts text once, or deletes text once, and -uses @code{rl_insert_text()} or @code{rl_delete_text()} to do it, then -undoing is already done for you automatically. - -If you do multiple insertions or multiple deletions, or any combination -of these operations, you should group them together into one operation. -This is done with @code{rl_begin_undo_group()} and -@code{rl_end_undo_group()}. - -The types of events that can be undone are: - -@smallexample -enum undo_code @{ UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END @}; -@end smallexample - -Notice that @code{UNDO_DELETE} means to insert some text, and -@code{UNDO_INSERT} means to delete some text. That is, the undo code -tells what to undo, not how to undo it. @code{UNDO_BEGIN} and -@code{UNDO_END} are tags added by @code{rl_begin_undo_group()} and -@code{rl_end_undo_group()}. - -@deftypefun int rl_begin_undo_group (void) -Begins saving undo information in a group construct. The undo -information usually comes from calls to @code{rl_insert_text()} and -@code{rl_delete_text()}, but could be the result of calls to -@code{rl_add_undo()}. -@end deftypefun - -@deftypefun int rl_end_undo_group (void) -Closes the current undo group started with @code{rl_begin_undo_group -()}. There should be one call to @code{rl_end_undo_group()} -for each call to @code{rl_begin_undo_group()}. -@end deftypefun - -@deftypefun void rl_add_undo (enum undo_code what, int start, int end, char *text) -Remember how to undo an event (according to @var{what}). The affected -text runs from @var{start} to @var{end}, and encompasses @var{text}. -@end deftypefun - -@deftypefun void rl_free_undo_list (void) -Free the existing undo list. -@end deftypefun - -@deftypefun int rl_do_undo (void) -Undo the first thing on the undo list. Returns @code{0} if there was -nothing to undo, non-zero if something was undone. -@end deftypefun - -Finally, if you neither insert nor delete text, but directly modify the -existing text (e.g., change its case), call @code{rl_modifying()} -once, just before you modify the text. You must supply the indices of -the text range that you are going to modify. - -@deftypefun int rl_modifying (int start, int end) -Tell Readline to save the text between @var{start} and @var{end} as a -single undo unit. It is assumed that you will subsequently modify -that text. -@end deftypefun - -@node Redisplay -@subsection Redisplay - -@deftypefun void rl_redisplay (void) -Change what's displayed on the screen to reflect the current contents -of @code{rl_line_buffer}. -@end deftypefun - -@deftypefun int rl_forced_update_display (void) -Force the line to be updated and redisplayed, whether or not -Readline thinks the screen display is correct. -@end deftypefun - -@deftypefun int rl_on_new_line (void) -Tell the update functions that we have moved onto a new (empty) line, -usually after outputting a newline. -@end deftypefun - -@deftypefun int rl_on_new_line_with_prompt (void) -Tell the update functions that we have moved onto a new line, with -@var{rl_prompt} already displayed. -This could be used by applications that want to output the prompt string -themselves, but still need Readline to know the prompt string length for -redisplay. -It should be used after setting @var{rl_already_prompted}. -@end deftypefun - -@deftypefun int rl_clear_visible_line (void) -Clear the screen lines corresponding to the current line's contents. -@end deftypefun - -@deftypefun int rl_reset_line_state (void) -Reset the display state to a clean state and redisplay the current line -starting on a new line. -@end deftypefun - -@deftypefun int rl_crlf (void) -Move the cursor to the start of the next screen line. -@end deftypefun - -@deftypefun int rl_show_char (int c) -Display character @var{c} on @code{rl_outstream}. -If Readline has not been set to display meta characters directly, this -will convert meta characters to a meta-prefixed key sequence. -This is intended for use by applications which wish to do their own -redisplay. -@end deftypefun - -@deftypefun int rl_message (const char *, @dots{}) -The arguments are a format string as would be supplied to @code{printf}, -possibly containing conversion specifications such as @samp{%d}, and -any additional arguments necessary to satisfy the conversion specifications. -The resulting string is displayed in the @dfn{echo area}. The echo area -is also used to display numeric arguments and search strings. -You should call @code{rl_save_prompt} to save the prompt information -before calling this function. -@end deftypefun - -@deftypefun int rl_clear_message (void) -Clear the message in the echo area. If the prompt was saved with a call to -@code{rl_save_prompt} before the last call to @code{rl_message}, -call @code{rl_restore_prompt} before calling this function. -@end deftypefun - -@deftypefun void rl_save_prompt (void) -Save the local Readline prompt display state in preparation for -displaying a new message in the message area with @code{rl_message()}. -@end deftypefun - -@deftypefun void rl_restore_prompt (void) -Restore the local Readline prompt display state saved by the most -recent call to @code{rl_save_prompt}. -if @code{rl_save_prompt} was called to save the prompt before a call -to @code{rl_message}, this function should be called before the -corresponding call to @code{rl_clear_message}. -@end deftypefun - -@deftypefun int rl_expand_prompt (char *prompt) -Expand any special character sequences in @var{prompt} and set up the -local Readline prompt redisplay variables. -This function is called by @code{readline()}. It may also be called to -expand the primary prompt if the @code{rl_on_new_line_with_prompt()} -function or @code{rl_already_prompted} variable is used. -It returns the number of visible characters on the last line of the -(possibly multi-line) prompt. -Applications may indicate that the prompt contains characters that take -up no physical screen space when displayed by bracketing a sequence of -such characters with the special markers @code{RL_PROMPT_START_IGNORE} -and @code{RL_PROMPT_END_IGNORE} (declared in @file{readline.h}). This may -be used to embed terminal-specific escape sequences in prompts. -@end deftypefun - -@deftypefun int rl_set_prompt (const char *prompt) -Make Readline use @var{prompt} for subsequent redisplay. This calls -@code{rl_expand_prompt()} to expand the prompt and sets @code{rl_prompt} -to the result. -@end deftypefun - -@node Modifying Text -@subsection Modifying Text - -@deftypefun int rl_insert_text (const char *text) -Insert @var{text} into the line at the current cursor position. -Returns the number of characters inserted. -@end deftypefun - -@deftypefun int rl_delete_text (int start, int end) -Delete the text between @var{start} and @var{end} in the current line. -Returns the number of characters deleted. -@end deftypefun - -@deftypefun {char *} rl_copy_text (int start, int end) -Return a copy of the text between @var{start} and @var{end} in -the current line. -@end deftypefun - -@deftypefun int rl_kill_text (int start, int end) -Copy the text between @var{start} and @var{end} in the current line -to the kill ring, appending or prepending to the last kill if the -last command was a kill command. The text is deleted. -If @var{start} is less than @var{end}, -the text is appended, otherwise prepended. If the last command was -not a kill, a new kill ring slot is used. -@end deftypefun - -@deftypefun int rl_push_macro_input (char *macro) -Cause @var{macro} to be inserted into the line, as if it had been invoked -by a key bound to a macro. Not especially useful; use -@code{rl_insert_text()} instead. -@end deftypefun - -@node Character Input -@subsection Character Input - -@deftypefun int rl_read_key (void) -Return the next character available from Readline's current input stream. -This handles input inserted into -the input stream via @var{rl_pending_input} (@pxref{Readline Variables}) -and @code{rl_stuff_char()}, macros, and characters read from the keyboard. -While waiting for input, this function will call any function assigned to -the @code{rl_event_hook} variable. -@end deftypefun - -@deftypefun int rl_getc (FILE *stream) -Return the next character available from @var{stream}, which is assumed to -be the keyboard. -@end deftypefun - -@deftypefun int rl_stuff_char (int c) -Insert @var{c} into the Readline input stream. It will be "read" -before Readline attempts to read characters from the terminal with -@code{rl_read_key()}. Up to 512 characters may be pushed back. -@code{rl_stuff_char} returns 1 if the character was successfully inserted; -0 otherwise. -@end deftypefun - -@deftypefun int rl_execute_next (int c) -Make @var{c} be the next command to be executed when @code{rl_read_key()} -is called. This sets @var{rl_pending_input}. -@end deftypefun - -@deftypefun int rl_clear_pending_input (void) -Unset @var{rl_pending_input}, effectively negating the effect of any -previous call to @code{rl_execute_next()}. This works only if the -pending input has not already been read with @code{rl_read_key()}. -@end deftypefun - -@deftypefun int rl_set_keyboard_input_timeout (int u) -While waiting for keyboard input in @code{rl_read_key()}, Readline will -wait for @var{u} microseconds for input before calling any function -assigned to @code{rl_event_hook}. @var{u} must be greater than or equal -to zero (a zero-length timeout is equivalent to a poll). -The default waiting period is one-tenth of a second. -Returns the old timeout value. -@end deftypefun - -@node Terminal Management -@subsection Terminal Management - -@deftypefun void rl_prep_terminal (int meta_flag) -Modify the terminal settings for Readline's use, so @code{readline()} -can read a single character at a time from the keyboard. -The @var{meta_flag} argument should be non-zero if Readline should -read eight-bit input. -@end deftypefun - -@deftypefun void rl_deprep_terminal (void) -Undo the effects of @code{rl_prep_terminal()}, leaving the terminal in -the state in which it was before the most recent call to -@code{rl_prep_terminal()}. -@end deftypefun - -@deftypefun void rl_tty_set_default_bindings (Keymap kmap) -Read the operating system's terminal editing characters (as would be -displayed by @code{stty}) to their Readline equivalents. -The bindings are performed in @var{kmap}. -@end deftypefun - -@deftypefun void rl_tty_unset_default_bindings (Keymap kmap) -Reset the bindings manipulated by @code{rl_tty_set_default_bindings} so -that the terminal editing characters are bound to @code{rl_insert}. -The bindings are performed in @var{kmap}. -@end deftypefun - -@deftypefun int rl_tty_set_echoing (int value) -Set Readline's idea of whether or not it is echoing output to its output -stream (@var{rl_outstream}). If @var{value} is 0, Readline does not display -output to @var{rl_outstream}; any other value enables output. The initial -value is set when Readline initializes the terminal settings. -This function returns the previous value. -@end deftypefun - -@deftypefun int rl_reset_terminal (const char *terminal_name) -Reinitialize Readline's idea of the terminal settings using -@var{terminal_name} as the terminal type (e.g., @code{vt100}). -If @var{terminal_name} is @code{NULL}, the value of the @code{TERM} -environment variable is used. -@end deftypefun - -@node Utility Functions -@subsection Utility Functions - -@deftypefun int rl_save_state (struct readline_state *sp) -Save a snapshot of Readline's internal state to @var{sp}. -The contents of the @var{readline_state} structure are documented -in @file{readline.h}. -The caller is responsible for allocating the structure. -@end deftypefun - -@deftypefun int rl_restore_state (struct readline_state *sp) -Restore Readline's internal state to that stored in @var{sp}, which must -have been saved by a call to @code{rl_save_state}. -The contents of the @var{readline_state} structure are documented -in @file{readline.h}. -The caller is responsible for freeing the structure. -@end deftypefun - -@deftypefun void rl_free (void *mem) -Deallocate the memory pointed to by @var{mem}. @var{mem} must have been -allocated by @code{malloc}. -@end deftypefun - -@deftypefun void rl_replace_line (const char *text, int clear_undo) -Replace the contents of @code{rl_line_buffer} with @var{text}. -The point and mark are preserved, if possible. -If @var{clear_undo} is non-zero, the undo list associated with the -current line is cleared. -@end deftypefun - -@deftypefun void rl_extend_line_buffer (int len) -Ensure that @code{rl_line_buffer} has enough space to hold @var{len} -characters, possibly reallocating it if necessary. -@end deftypefun - -@deftypefun int rl_initialize (void) -Initialize or re-initialize Readline's internal state. -It's not strictly necessary to call this; @code{readline()} calls it before -reading any input. -@end deftypefun - -@deftypefun int rl_ding (void) -Ring the terminal bell, obeying the setting of @code{bell-style}. -@end deftypefun - -@deftypefun int rl_alphabetic (int c) -Return 1 if @var{c} is an alphabetic character. -@end deftypefun - -@deftypefun void rl_display_match_list (char **matches, int len, int max) -A convenience function for displaying a list of strings in -columnar format on Readline's output stream. @code{matches} is the list -of strings, in argv format, such as a list of completion matches. -@code{len} is the number of strings in @code{matches}, and @code{max} -is the length of the longest string in @code{matches}. This function uses -the setting of @code{print-completions-horizontally} to select how the -matches are displayed (@pxref{Readline Init File Syntax}). -When displaying completions, this function sets the number of columns used -for display to the value of @code{completion-display-width}, the value of -the environment variable @env{COLUMNS}, or the screen width, in that order. -@end deftypefun - -The following are implemented as macros, defined in @code{chardefs.h}. -Applications should refrain from using them. - -@deftypefun int _rl_uppercase_p (int c) -Return 1 if @var{c} is an uppercase alphabetic character. -@end deftypefun - -@deftypefun int _rl_lowercase_p (int c) -Return 1 if @var{c} is a lowercase alphabetic character. -@end deftypefun - -@deftypefun int _rl_digit_p (int c) -Return 1 if @var{c} is a numeric character. -@end deftypefun - -@deftypefun int _rl_to_upper (int c) -If @var{c} is a lowercase alphabetic character, return the corresponding -uppercase character. -@end deftypefun - -@deftypefun int _rl_to_lower (int c) -If @var{c} is an uppercase alphabetic character, return the corresponding -lowercase character. -@end deftypefun - -@deftypefun int _rl_digit_value (int c) -If @var{c} is a number, return the value it represents. -@end deftypefun - -@node Miscellaneous Functions -@subsection Miscellaneous Functions - -@deftypefun int rl_macro_bind (const char *keyseq, const char *macro, Keymap map) -Bind the key sequence @var{keyseq} to invoke the macro @var{macro}. -The binding is performed in @var{map}. When @var{keyseq} is invoked, the -@var{macro} will be inserted into the line. This function is deprecated; -use @code{rl_generic_bind()} instead. -@end deftypefun - -@deftypefun void rl_macro_dumper (int readable) -Print the key sequences bound to macros and their values, using -the current keymap, to @code{rl_outstream}. -If @var{readable} is non-zero, the list is formatted in such a way -that it can be made part of an @code{inputrc} file and re-read. -@end deftypefun - -@deftypefun int rl_variable_bind (const char *variable, const char *value) -Make the Readline variable @var{variable} have @var{value}. -This behaves as if the readline command -@samp{set @var{variable} @var{value}} had been executed in an @code{inputrc} -file (@pxref{Readline Init File Syntax}). -@end deftypefun - -@deftypefun {char *} rl_variable_value (const char *variable) -Return a string representing the value of the Readline variable @var{variable}. -For boolean variables, this string is either @samp{on} or @samp{off}. -@end deftypefun - -@deftypefun void rl_variable_dumper (int readable) -Print the readline variable names and their current values -to @code{rl_outstream}. -If @var{readable} is non-zero, the list is formatted in such a way -that it can be made part of an @code{inputrc} file and re-read. -@end deftypefun - -@deftypefun int rl_set_paren_blink_timeout (int u) -Set the time interval (in microseconds) that Readline waits when showing -a balancing character when @code{blink-matching-paren} has been enabled. -@end deftypefun - -@deftypefun {char *} rl_get_termcap (const char *cap) -Retrieve the string value of the termcap capability @var{cap}. -Readline fetches the termcap entry for the current terminal name and -uses those capabilities to move around the screen line and perform other -terminal-specific operations, like erasing a line. Readline does not -use all of a terminal's capabilities, and this function will return -values for only those capabilities Readline uses. -@end deftypefun - -@deftypefun {void} rl_clear_history (void) -Clear the history list by deleting all of the entries, in the same manner -as the History library's @code{clear_history()} function. -This differs from @code{clear_history} because it frees private data -Readline saves in the history list. -@end deftypefun - -@node Alternate Interface -@subsection Alternate Interface - -An alternate interface is available to plain @code{readline()}. Some -applications need to interleave keyboard I/O with file, device, or -window system I/O, typically by using a main loop to @code{select()} -on various file descriptors. To accommodate this need, readline can -also be invoked as a `callback' function from an event loop. There -are functions available to make this easy. - -@deftypefun void rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *lhandler) -Set up the terminal for readline I/O and display the initial -expanded value of @var{prompt}. Save the value of @var{lhandler} to -use as a handler function to call when a complete line of input has been -entered. -The handler function receives the text of the line as an argument. -As with @code{readline()}, the handler function should @code{free} the -line when it it finished with it. -@end deftypefun - -@deftypefun void rl_callback_read_char (void) -Whenever an application determines that keyboard input is available, it -should call @code{rl_callback_read_char()}, which will read the next -character from the current input source. -If that character completes the line, @code{rl_callback_read_char} will -invoke the @var{lhandler} function installed by -@code{rl_callback_handler_install} to process the line. -Before calling the @var{lhandler} function, the terminal settings are -reset to the values they had before calling -@code{rl_callback_handler_install}. -If the @var{lhandler} function returns, -and the line handler remains installed, -the terminal settings are modified for Readline's use again. -@code{EOF} is indicated by calling @var{lhandler} with a -@code{NULL} line. -@end deftypefun - -@deftypefun void rl_callback_sigcleanup (void) -Clean up any internal state the callback interface uses to maintain state -between calls to rl_callback_read_char (e.g., the state of any active -incremental searches). This is intended to be used by applications that -wish to perform their own signal handling; Readline's internal signal handler -calls this when appropriate. -@end deftypefun - -@deftypefun void rl_callback_handler_remove (void) -Restore the terminal to its initial state and remove the line handler. -You may call this function from within a callback as well as independently. -If the @var{lhandler} installed by @code{rl_callback_handler_install} -does not exit the program, either this function or the function referred -to by the value of @code{rl_deprep_term_function} should be called before -the program exits to reset the terminal settings. -@end deftypefun - -@node A Readline Example -@subsection A Readline Example - -Here is a function which changes lowercase characters to their uppercase -equivalents, and uppercase characters to lowercase. If -this function was bound to @samp{M-c}, then typing @samp{M-c} would -change the case of the character under point. Typing @samp{M-1 0 M-c} -would change the case of the following 10 characters, leaving the cursor on -the last character changed. - -@example -/* Invert the case of the COUNT following characters. */ -int -invert_case_line (count, key) - int count, key; -@{ - register int start, end, i; - - start = rl_point; - - if (rl_point >= rl_end) - return (0); - - if (count < 0) - @{ - direction = -1; - count = -count; - @} - else - direction = 1; - - /* Find the end of the range to modify. */ - end = start + (count * direction); - - /* Force it to be within range. */ - if (end > rl_end) - end = rl_end; - else if (end < 0) - end = 0; - - if (start == end) - return (0); - - if (start > end) - @{ - int temp = start; - start = end; - end = temp; - @} - - /* Tell readline that we are modifying the line, - so it will save the undo information. */ - rl_modifying (start, end); - - for (i = start; i != end; i++) - @{ - if (_rl_uppercase_p (rl_line_buffer[i])) - rl_line_buffer[i] = _rl_to_lower (rl_line_buffer[i]); - else if (_rl_lowercase_p (rl_line_buffer[i])) - rl_line_buffer[i] = _rl_to_upper (rl_line_buffer[i]); - @} - /* Move point to on top of the last character changed. */ - rl_point = (direction == 1) ? end - 1 : start; - return (0); -@} -@end example - -@node Alternate Interface Example -@subsection Alternate Interface Example - -Here is a complete program that illustrates Readline's alternate interface. -It reads lines from the terminal and displays them, providing the -standard history and TAB completion functions. -It understands the EOF character or "exit" to exit the program. - -@example -/* Standard include files. stdio.h is required. */ -#include -#include -#include -#include - -/* Used for select(2) */ -#include -#include - -#include - -#include - -/* Standard readline include files. */ -#include -#include - -static void cb_linehandler (char *); -static void sighandler (int); - -int running; -int sigwinch_received; -const char *prompt = "rltest$ "; - -/* Handle SIGWINCH and window size changes when readline is not active and - reading a character. */ -static void -sighandler (int sig) -@{ - sigwinch_received = 1; -@} - -/* Callback function called for each line when accept-line executed, EOF - seen, or EOF character read. This sets a flag and returns; it could - also call exit(3). */ -static void -cb_linehandler (char *line) -@{ - /* Can use ^D (stty eof) or `exit' to exit. */ - if (line == NULL || strcmp (line, "exit") == 0) - @{ - if (line == 0) - printf ("\n"); - printf ("exit\n"); - /* This function needs to be called to reset the terminal settings, - and calling it from the line handler keeps one extra prompt from - being displayed. */ - rl_callback_handler_remove (); - - running = 0; - @} - else - @{ - if (*line) - add_history (line); - printf ("input line: %s\n", line); - free (line); - @} -@} - -int -main (int c, char **v) -@{ - fd_set fds; - int r; - - /* Set the default locale values according to environment variables. */ - setlocale (LC_ALL, ""); - - /* Handle window size changes when readline is not active and reading - characters. */ - signal (SIGWINCH, sighandler); - - /* Install the line handler. */ - rl_callback_handler_install (prompt, cb_linehandler); - - /* Enter a simple event loop. This waits until something is available - to read on readline's input stream (defaults to standard input) and - calls the builtin character read callback to read it. It does not - have to modify the user's terminal settings. */ - running = 1; - while (running) - @{ - FD_ZERO (&fds); - FD_SET (fileno (rl_instream), &fds); - - r = select (FD_SETSIZE, &fds, NULL, NULL, NULL); - if (r < 0 && errno != EINTR) - @{ - perror ("rltest: select"); - rl_callback_handler_remove (); - break; - @} - if (sigwinch_received) - @{ - rl_resize_terminal (); - sigwinch_received = 0; - @} - if (r < 0) - continue; - - if (FD_ISSET (fileno (rl_instream), &fds)) - rl_callback_read_char (); - @} - - printf ("rltest: Event loop has exited\n"); - return 0; -@} -@end example - -@node Readline Signal Handling -@section Readline Signal Handling - -Signals are asynchronous events sent to a process by the Unix kernel, -sometimes on behalf of another process. They are intended to indicate -exceptional events, like a user pressing the interrupt key on his terminal, -or a network connection being broken. There is a class of signals that can -be sent to the process currently reading input from the keyboard. Since -Readline changes the terminal attributes when it is called, it needs to -perform special processing when such a signal is received in order to -restore the terminal to a sane state, or provide application writers with -functions to do so manually. - -Readline contains an internal signal handler that is installed for a -number of signals (@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, -@code{SIGHUP}, -@code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}). -When one of these signals is received, the signal handler -will reset the terminal attributes to those that were in effect before -@code{readline()} was called, reset the signal handling to what it was -before @code{readline()} was called, and resend the signal to the calling -application. -If and when the calling application's signal handler returns, Readline -will reinitialize the terminal and continue to accept input. -When a @code{SIGINT} is received, the Readline signal handler performs -some additional work, which will cause any partially-entered line to be -aborted (see the description of @code{rl_free_line_state()} below). - -There is an additional Readline signal handler, for @code{SIGWINCH}, which -the kernel sends to a process whenever the terminal's size changes (for -example, if a user resizes an @code{xterm}). The Readline @code{SIGWINCH} -handler updates Readline's internal screen size information, and then calls -any @code{SIGWINCH} signal handler the calling application has installed. -Readline calls the application's @code{SIGWINCH} signal handler without -resetting the terminal to its original state. If the application's signal -handler does more than update its idea of the terminal size and return (for -example, a @code{longjmp} back to a main processing loop), it @emph{must} -call @code{rl_cleanup_after_signal()} (described below), to restore the -terminal state. - -When an application is using the callback interface -(@pxref{Alternate Interface}), Readline installs signal handlers only for -the duration of the call to @code{rl_callback_read_char}. Applications -using the callback interface should be prepared to clean up Readline's -state if they wish to handle the signal before the line handler completes -and restores the terminal state. - -If an application using the callback interface wishes to have Readline -install its signal handlers at the time the application calls -@code{rl_callback_handler_install} and remove them only when a complete -line of input has been read, it should set the -@code{rl_persistent_signal_handlers} variable to a non-zero value. -This allows an application to defer all of the handling of the signals -Readline catches to Readline. -Applications should use this variable with care; it can result in Readline -catching signals and not acting on them (or allowing the application to react -to them) until the application calls @code{rl_callback_read_char}. This -can result in an application becoming less responsive to keyboard signals -like SIGINT. -If an application does not want or need to perform any signal handling, or -does not need to do any processing between calls to @code{rl_callback_read_char}, -setting this variable may be desirable. - -Readline provides two variables that allow application writers to -control whether or not it will catch certain signals and act on them -when they are received. It is important that applications change the -values of these variables only when calling @code{readline()}, not in -a signal handler, so Readline's internal signal state is not corrupted. - -@deftypevar int rl_catch_signals -If this variable is non-zero, Readline will install signal handlers for -@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, -@code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}. - -The default value of @code{rl_catch_signals} is 1. -@end deftypevar - -@deftypevar int rl_catch_sigwinch -If this variable is set to a non-zero value, -Readline will install a signal handler for @code{SIGWINCH}. - -The default value of @code{rl_catch_sigwinch} is 1. -@end deftypevar - -@deftypevar int rl_persistent_signal_handlers -If an application using the callback interface wishes Readline's signal -handlers to be installed and active during the set of calls to -@code{rl_callback_read_char} that constitutes an entire single line, -it should set this variable to a non-zero value. - -The default value of @code{rl_persistent_signal_handlers} is 0. -@end deftypevar - -@deftypevar int rl_change_environment -If this variable is set to a non-zero value, -and Readline is handling @code{SIGWINCH}, Readline will modify the -@var{LINES} and @var{COLUMNS} environment variables upon receipt of a -@code{SIGWINCH} - -The default value of @code{rl_change_environment} is 1. -@end deftypevar - -If an application does not wish to have Readline catch any signals, or -to handle signals other than those Readline catches (@code{SIGHUP}, -for example), -Readline provides convenience functions to do the necessary terminal -and internal state cleanup upon receipt of a signal. - -@deftypefun int rl_pending_signal (void) -Return the signal number of the most recent signal Readline received but -has not yet handled, or 0 if there is no pending signal. -@end deftypefun - -@deftypefun void rl_cleanup_after_signal (void) -This function will reset the state of the terminal to what it was before -@code{readline()} was called, and remove the Readline signal handlers for -all signals, depending on the values of @code{rl_catch_signals} and -@code{rl_catch_sigwinch}. -@end deftypefun - -@deftypefun void rl_free_line_state (void) -This will free any partial state associated with the current input line -(undo information, any partial history entry, any partially-entered -keyboard macro, and any partially-entered numeric argument). This -should be called before @code{rl_cleanup_after_signal()}. The -Readline signal handler for @code{SIGINT} calls this to abort the -current input line. -@end deftypefun - -@deftypefun void rl_reset_after_signal (void) -This will reinitialize the terminal and reinstall any Readline signal -handlers, depending on the values of @code{rl_catch_signals} and -@code{rl_catch_sigwinch}. -@end deftypefun - -If an application wants to force Readline to handle any signals that -have arrived while it has been executing, @code{rl_check_signals()} -will call Readline's internal signal handler if there are any pending -signals. This is primarily intended for those applications that use -a custom @code{rl_getc_function} (@pxref{Readline Variables}) and wish -to handle signals received while waiting for input. - -@deftypefun void rl_check_signals (void) -If there are any pending signals, call Readline's internal signal handling -functions to process them. @code{rl_pending_signal()} can be used independently -to determine whether or not there are any pending signals. -@end deftypefun - -If an application does not wish Readline to catch @code{SIGWINCH}, it may -call @code{rl_resize_terminal()} or @code{rl_set_screen_size()} to force -Readline to update its idea of the terminal size when a @code{SIGWINCH} -is received. - -@deftypefun void rl_echo_signal_char (int sig) -If an application wishes to install its own signal handlers, but still -have readline display characters that generate signals, calling this -function with @var{sig} set to @code{SIGINT}, @code{SIGQUIT}, or -@code{SIGTSTP} will display the character generating that signal. -@end deftypefun - -@deftypefun void rl_resize_terminal (void) -Update Readline's internal screen size by reading values from the kernel. -@end deftypefun - -@deftypefun void rl_set_screen_size (int rows, int cols) -Set Readline's idea of the terminal size to @var{rows} rows and -@var{cols} columns. If either @var{rows} or @var{columns} is less than -or equal to 0, Readline's idea of that terminal dimension is unchanged. -@end deftypefun - -If an application does not want to install a @code{SIGWINCH} handler, but -is still interested in the screen dimensions, Readline's idea of the screen -size may be queried. - -@deftypefun void rl_get_screen_size (int *rows, int *cols) -Return Readline's idea of the terminal's size in the -variables pointed to by the arguments. -@end deftypefun - -@deftypefun void rl_reset_screen_size (void) -Cause Readline to reobtain the screen size and recalculate its dimensions. -@end deftypefun - -The following functions install and remove Readline's signal handlers. - -@deftypefun int rl_set_signals (void) -Install Readline's signal handler for @code{SIGINT}, @code{SIGQUIT}, -@code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, -@code{SIGTTOU}, and @code{SIGWINCH}, depending on the values of -@code{rl_catch_signals} and @code{rl_catch_sigwinch}. -@end deftypefun - -@deftypefun int rl_clear_signals (void) -Remove all of the Readline signal handlers installed by -@code{rl_set_signals()}. -@end deftypefun - -@node Custom Completers -@section Custom Completers -@cindex application-specific completion functions - -Typically, a program that reads commands from the user has a way of -disambiguating commands and data. If your program is one of these, then -it can provide completion for commands, data, or both. -The following sections describe how your program and Readline -cooperate to provide this service. - -@menu -* How Completing Works:: The logic used to do completion. -* Completion Functions:: Functions provided by Readline. -* Completion Variables:: Variables which control completion. -* A Short Completion Example:: An example of writing completer subroutines. -@end menu - -@node How Completing Works -@subsection How Completing Works - -In order to complete some text, the full list of possible completions -must be available. That is, it is not possible to accurately -expand a partial word without knowing all of the possible words -which make sense in that context. The Readline library provides -the user interface to completion, and two of the most common -completion functions: filename and username. For completing other types -of text, you must write your own completion function. This section -describes exactly what such functions must do, and provides an example. - -There are three major functions used to perform completion: - -@enumerate -@item -The user-interface function @code{rl_complete()}. This function is -called with the same arguments as other bindable Readline functions: -@var{count} and @var{invoking_key}. -It isolates the word to be completed and calls -@code{rl_completion_matches()} to generate a list of possible completions. -It then either lists the possible completions, inserts the possible -completions, or actually performs the -completion, depending on which behavior is desired. - -@item -The internal function @code{rl_completion_matches()} uses an -application-supplied @dfn{generator} function to generate the list of -possible matches, and then returns the array of these matches. -The caller should place the address of its generator function in -@code{rl_completion_entry_function}. - -@item -The generator function is called repeatedly from -@code{rl_completion_matches()}, returning a string each time. The -arguments to the generator function are @var{text} and @var{state}. -@var{text} is the partial word to be completed. @var{state} is zero the -first time the function is called, allowing the generator to perform -any necessary initialization, and a positive non-zero integer for -each subsequent call. The generator function returns -@code{(char *)NULL} to inform @code{rl_completion_matches()} that there are -no more possibilities left. Usually the generator function computes the -list of possible completions when @var{state} is zero, and returns them -one at a time on subsequent calls. Each string the generator function -returns as a match must be allocated with @code{malloc()}; Readline -frees the strings when it has finished with them. -Such a generator function is referred to as an -@dfn{application-specific completion function}. - -@end enumerate - -@deftypefun int rl_complete (int ignore, int invoking_key) -Complete the word at or before point. You have supplied the function -that does the initial simple matching selection algorithm (see -@code{rl_completion_matches()}). The default is to do filename completion. -@end deftypefun - -@deftypevar {rl_compentry_func_t *} rl_completion_entry_function -This is a pointer to the generator function for -@code{rl_completion_matches()}. -If the value of @code{rl_completion_entry_function} is -@code{NULL} then the default filename generator -function, @code{rl_filename_completion_function()}, is used. -An @dfn{application-specific completion function} is a function whose -address is assigned to @code{rl_completion_entry_function} and whose -return values are used to generate possible completions. -@end deftypevar - -@node Completion Functions -@subsection Completion Functions - -Here is the complete list of callable completion functions present in -Readline. - -@deftypefun int rl_complete_internal (int what_to_do) -Complete the word at or before point. @var{what_to_do} says what to do -with the completion. A value of @samp{?} means list the possible -completions. @samp{TAB} means do standard completion. @samp{*} means -insert all of the possible completions. @samp{!} means to display -all of the possible completions, if there is more than one, as well as -performing partial completion. @samp{@@} is similar to @samp{!}, but -possible completions are not listed if the possible completions share -a common prefix. -@end deftypefun - -@deftypefun int rl_complete (int ignore, int invoking_key) -Complete the word at or before point. You have supplied the function -that does the initial simple matching selection algorithm (see -@code{rl_completion_matches()} and @code{rl_completion_entry_function}). -The default is to do filename -completion. This calls @code{rl_complete_internal()} with an -argument depending on @var{invoking_key}. -@end deftypefun - -@deftypefun int rl_possible_completions (int count, int invoking_key) -List the possible completions. See description of @code{rl_complete -()}. This calls @code{rl_complete_internal()} with an argument of -@samp{?}. -@end deftypefun - -@deftypefun int rl_insert_completions (int count, int invoking_key) -Insert the list of possible completions into the line, deleting the -partially-completed word. See description of @code{rl_complete()}. -This calls @code{rl_complete_internal()} with an argument of @samp{*}. -@end deftypefun - -@deftypefun int rl_completion_mode (rl_command_func_t *cfunc) -Returns the appropriate value to pass to @code{rl_complete_internal()} -depending on whether @var{cfunc} was called twice in succession and -the values of the @code{show-all-if-ambiguous} and -@code{show-all-if-unmodified} variables. -Application-specific completion functions may use this function to present -the same interface as @code{rl_complete()}. -@end deftypefun - -@deftypefun {char **} rl_completion_matches (const char *text, rl_compentry_func_t *entry_func) -Returns an array of strings which is a list of completions for -@var{text}. If there are no completions, returns @code{NULL}. -The first entry in the returned array is the substitution for @var{text}. -The remaining entries are the possible completions. The array is -terminated with a @code{NULL} pointer. - -@var{entry_func} is a function of two args, and returns a -@code{char *}. The first argument is @var{text}. The second is a -state argument; it is zero on the first call, and non-zero on subsequent -calls. @var{entry_func} returns a @code{NULL} pointer to the caller -when there are no more matches. -@end deftypefun - -@deftypefun {char *} rl_filename_completion_function (const char *text, int state) -A generator function for filename completion in the general case. -@var{text} is a partial filename. -The Bash source is a useful reference for writing application-specific -completion functions (the Bash completion functions call this and other -Readline functions). -@end deftypefun - -@deftypefun {char *} rl_username_completion_function (const char *text, int state) -A completion generator for usernames. @var{text} contains a partial -username preceded by a random character (usually @samp{~}). As with all -completion generators, @var{state} is zero on the first call and non-zero -for subsequent calls. -@end deftypefun - -@node Completion Variables -@subsection Completion Variables - -@deftypevar {rl_compentry_func_t *} rl_completion_entry_function -A pointer to the generator function for @code{rl_completion_matches()}. -@code{NULL} means to use @code{rl_filename_completion_function()}, -the default filename completer. -@end deftypevar - -@deftypevar {rl_completion_func_t *} rl_attempted_completion_function -A pointer to an alternative function to create matches. -The function is called with @var{text}, @var{start}, and @var{end}. -@var{start} and @var{end} are indices in @code{rl_line_buffer} defining -the boundaries of @var{text}, which is a character string. -If this function exists and returns @code{NULL}, or if this variable is -set to @code{NULL}, then @code{rl_complete()} will call the value of -@code{rl_completion_entry_function} to generate matches, otherwise the -array of strings returned will be used. -If this function sets the @code{rl_attempted_completion_over} -variable to a non-zero value, Readline will not perform its default -completion even if this function returns no matches. -@end deftypevar - -@deftypevar {rl_quote_func_t *} rl_filename_quoting_function -A pointer to a function that will quote a filename in an -application-specific fashion. This is called if filename completion is being -attempted and one of the characters in @code{rl_filename_quote_characters} -appears in a completed filename. The function is called with -@var{text}, @var{match_type}, and @var{quote_pointer}. The @var{text} -is the filename to be quoted. The @var{match_type} is either -@code{SINGLE_MATCH}, if there is only one completion match, or -@code{MULT_MATCH}. Some functions use this to decide whether or not to -insert a closing quote character. The @var{quote_pointer} is a pointer -to any opening quote character the user typed. Some functions choose -to reset this character. -@end deftypevar - -@deftypevar {rl_dequote_func_t *} rl_filename_dequoting_function -A pointer to a function that will remove application-specific quoting -characters from a filename before completion is attempted, so those -characters do not interfere with matching the text against names in -the filesystem. It is called with @var{text}, the text of the word -to be dequoted, and @var{quote_char}, which is the quoting character -that delimits the filename (usually @samp{'} or @samp{"}). If -@var{quote_char} is zero, the filename was not in an embedded string. -@end deftypevar - -@deftypevar {rl_linebuf_func_t *} rl_char_is_quoted_p -A pointer to a function to call that determines whether or not a specific -character in the line buffer is quoted, according to whatever quoting -mechanism the program calling Readline uses. The function is called with -two arguments: @var{text}, the text of the line, and @var{index}, the -index of the character in the line. It is used to decide whether a -character found in @code{rl_completer_word_break_characters} should be -used to break words for the completer. -@end deftypevar - -@deftypevar {rl_compignore_func_t *} rl_ignore_some_completions_function -This function, if defined, is called by the completer when real filename -completion is done, after all the matching names have been generated. -It is passed a @code{NULL} terminated array of matches. -The first element (@code{matches[0]}) is the -maximal substring common to all matches. This function can -re-arrange the list of matches as required, but each element deleted -from the array must be freed. -@end deftypevar - -@deftypevar {rl_icppfunc_t *} rl_directory_completion_hook -This function, if defined, is allowed to modify the directory portion -of filenames Readline completes. -It could be used to expand symbolic links or shell variables in pathnames. -It is called with the address of a string (the current directory name) as an -argument, and may modify that string. -If the string is replaced with a new string, the old value should be freed. -Any modified directory name should have a trailing slash. -The modified value will be used as part of the completion, replacing -the directory portion of the pathname the user typed. -At the least, even if no other expansion is performed, this function should -remove any quote characters from the directory name, because its result will -be passed directly to @code{opendir()}. - -The directory completion hook returns an integer that should be non-zero if -the function modifies its directory argument. -The function should not modify the directory argument if it returns 0. -@end deftypevar - -@deftypevar {rl_icppfunc_t *} rl_directory_rewrite_hook; -If non-zero, this is the address of a function to call when completing -a directory name. This function takes the address of the directory name -to be modified as an argument. Unlike @code{rl_directory_completion_hook}, -it only modifies the directory name used in @code{opendir}, not what is -displayed when the possible completions are printed or inserted. It is -called before rl_directory_completion_hook. -At the least, even if no other expansion is performed, this function should -remove any quote characters from the directory name, because its result will -be passed directly to @code{opendir()}. - -The directory rewrite hook returns an integer that should be non-zero if -the function modfies its directory argument. -The function should not modify the directory argument if it returns 0. -@end deftypevar - -@deftypevar {rl_icppfunc_t *} rl_filename_stat_hook -If non-zero, this is the address of a function for the completer to -call before deciding which character to append to a completed name. -This function modifies its filename name argument, and the modified value -is passed to @code{stat()} to determine the file's type and characteristics. -This function does not need to remove quote characters from the filename. - -The stat hook returns an integer that should be non-zero if -the function modfies its directory argument. -The function should not modify the directory argument if it returns 0. -@end deftypevar - -@deftypevar {rl_dequote_func_t *} rl_filename_rewrite_hook -If non-zero, this is the address of a function called when reading -directory entries from the filesystem for completion and comparing -them to the partial word to be completed. The function should -perform any necessary application or system-specific conversion on -the filename, such as converting between character sets or converting -from a filesystem format to a character input format. -The function takes two arguments: @var{fname}, the filename to be converted, -and @var{fnlen}, its length in bytes. -It must either return its first argument (if no conversion takes place) -or the converted filename in newly-allocated memory. The converted -form is used to compare against the word to be completed, and, if it -matches, is added to the list of matches. Readline will free the -allocated string. -@end deftypevar - -@deftypevar {rl_compdisp_func_t *} rl_completion_display_matches_hook -If non-zero, then this is the address of a function to call when -completing a word would normally display the list of possible matches. -This function is called in lieu of Readline displaying the list. -It takes three arguments: -(@code{char **}@var{matches}, @code{int} @var{num_matches}, @code{int} @var{max_length}) -where @var{matches} is the array of matching strings, -@var{num_matches} is the number of strings in that array, and -@var{max_length} is the length of the longest string in that array. -Readline provides a convenience function, @code{rl_display_match_list}, -that takes care of doing the display to Readline's output stream. -You may call that function from this hook. -@end deftypevar - -@deftypevar {const char *} rl_basic_word_break_characters -The basic list of characters that signal a break between words for the -completer routine. The default value of this variable is the characters -which break words for completion in Bash: -@code{" \t\n\"\\'`@@$><=;|&@{("}. -@end deftypevar - -@deftypevar {const char *} rl_basic_quote_characters -A list of quote characters which can cause a word break. -@end deftypevar - -@deftypevar {const char *} rl_completer_word_break_characters -The list of characters that signal a break between words for -@code{rl_complete_internal()}. The default list is the value of -@code{rl_basic_word_break_characters}. -@end deftypevar - -@deftypevar {rl_cpvfunc_t *} rl_completion_word_break_hook -If non-zero, this is the address of a function to call when Readline is -deciding where to separate words for word completion. It should return -a character string like @code{rl_completer_word_break_characters} to be -used to perform the current completion. The function may choose to set -@code{rl_completer_word_break_characters} itself. If the function -returns @code{NULL}, @code{rl_completer_word_break_characters} is used. -@end deftypevar - -@deftypevar {const char *} rl_completer_quote_characters -A list of characters which can be used to quote a substring of the line. -Completion occurs on the entire substring, and within the substring -@code{rl_completer_word_break_characters} are treated as any other character, -unless they also appear within this list. -@end deftypevar - -@deftypevar {const char *} rl_filename_quote_characters -A list of characters that cause a filename to be quoted by the completer -when they appear in a completed filename. The default is the null string. -@end deftypevar - -@deftypevar {const char *} rl_special_prefixes -The list of characters that are word break characters, but should be -left in @var{text} when it is passed to the completion function. -Programs can use this to help determine what kind of completing to do. -For instance, Bash sets this variable to "$@@" so that it can complete -shell variables and hostnames. -@end deftypevar - -@deftypevar int rl_completion_query_items -Up to this many items will be displayed in response to a -possible-completions call. After that, readline asks the user if she is sure -she wants to see them all. The default value is 100. A negative value -indicates that Readline should never ask the user. -@end deftypevar - -@deftypevar {int} rl_completion_append_character -When a single completion alternative matches at the end of the command -line, this character is appended to the inserted completion text. The -default is a space character (@samp{ }). Setting this to the null -character (@samp{\0}) prevents anything being appended automatically. -This can be changed in application-specific completion functions to -provide the ``most sensible word separator character'' according to -an application-specific command line syntax specification. -It is set to the default before any application-specific completion function -is called, and may only be changed within such a function. -@end deftypevar - -@deftypevar int rl_completion_suppress_append -If non-zero, @var{rl_completion_append_character} is not appended to -matches at the end of the command line, as described above. -It is set to 0 before any application-specific completion function -is called, and may only be changed within such a function. -@end deftypevar - -@deftypevar int rl_completion_quote_character -When Readline is completing quoted text, as delimited by one of the -characters in @var{rl_completer_quote_characters}, it sets this variable -to the quoting character found. -This is set before any application-specific completion function is called. -@end deftypevar - -@deftypevar int rl_completion_suppress_quote -If non-zero, Readline does not append a matching quote character when -performing completion on a quoted string. -It is set to 0 before any application-specific completion function -is called, and may only be changed within such a function. -@end deftypevar - -@deftypevar int rl_completion_found_quote -When Readline is completing quoted text, it sets this variable -to a non-zero value if the word being completed contains or is delimited -by any quoting characters, including backslashes. -This is set before any application-specific completion function is called. -@end deftypevar - -@deftypevar int rl_completion_mark_symlink_dirs -If non-zero, a slash will be appended to completed filenames that are -symbolic links to directory names, subject to the value of the -user-settable @var{mark-directories} variable. -This variable exists so that application-specific completion functions -can override the user's global preference (set via the -@var{mark-symlinked-directories} Readline variable) if appropriate. -This variable is set to the user's preference before any -application-specific completion function is called, so unless that -function modifies the value, the user's preferences are honored. -@end deftypevar - -@deftypevar int rl_ignore_completion_duplicates -If non-zero, then duplicates in the matches are removed. -The default is 1. -@end deftypevar - -@deftypevar int rl_filename_completion_desired -Non-zero means that the results of the matches are to be treated as -filenames. This is @emph{always} zero when completion is attempted, -and can only be changed -within an application-specific completion function. If it is set to a -non-zero value by such a function, directory names have a slash appended -and Readline attempts to quote completed filenames if they contain any -characters in @code{rl_filename_quote_characters} and -@code{rl_filename_quoting_desired} is set to a non-zero value. -@end deftypevar - -@deftypevar int rl_filename_quoting_desired -Non-zero means that the results of the matches are to be quoted using -double quotes (or an application-specific quoting mechanism) if the -completed filename contains any characters in -@code{rl_filename_quote_chars}. This is @emph{always} non-zero -when completion is attempted, and can only be changed within an -application-specific completion function. -The quoting is effected via a call to the function pointed to -by @code{rl_filename_quoting_function}. -@end deftypevar - -@deftypevar int rl_attempted_completion_over -If an application-specific completion function assigned to -@code{rl_attempted_completion_function} sets this variable to a non-zero -value, Readline will not perform its default filename completion even -if the application's completion function returns no matches. -It should be set only by an application's completion function. -@end deftypevar - -@deftypevar int rl_sort_completion_matches -If an application sets this variable to 0, Readline will not sort the -list of completions (which implies that it cannot remove any duplicate -completions). The default value is 1, which means that Readline will -sort the completions and, depending on the value of -@code{rl_ignore_completion_duplicates}, will attempt to remove duplicate -matches. -@end deftypevar - -@deftypevar int rl_completion_type -Set to a character describing the type of completion Readline is currently -attempting; see the description of @code{rl_complete_internal()} -(@pxref{Completion Functions}) for the list of characters. -This is set to the appropriate value before any application-specific -completion function is called, allowing such functions to present -the same interface as @code{rl_complete()}. -@end deftypevar - -@deftypevar int rl_completion_invoking_key -Set to the final character in the key sequence that invoked one of the -completion functions that call @code{rl_complete_internal()}. This is -set to the appropriate value before any application-specific completion -function is called. -@end deftypevar - -@deftypevar int rl_inhibit_completion -If this variable is non-zero, completion is inhibited. The completion -character will be inserted as any other bound to @code{self-insert}. -@end deftypevar - -@node A Short Completion Example -@subsection A Short Completion Example - -Here is a small application demonstrating the use of the GNU Readline -library. It is called @code{fileman}, and the source code resides in -@file{examples/fileman.c}. This sample application provides -completion of command names, line editing features, and access to the -history list. - -@page -@smallexample -/* fileman.c -- A tiny application which demonstrates how to use the - GNU Readline library. This application interactively allows users - to manipulate files and their modes. */ - -#ifdef HAVE_CONFIG_H -# include -#endif - -#include -#ifdef HAVE_SYS_FILE_H -# include -#endif -#include - -#ifdef HAVE_UNISTD_H -# include -#endif - -#include -#include -#include - -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -#ifdef HAVE_STDLIB_H -# include -#endif - -#include - -#include -#include - -extern char *xmalloc PARAMS((size_t)); - -/* The names of functions that actually do the manipulation. */ -int com_list PARAMS((char *)); -int com_view PARAMS((char *)); -int com_rename PARAMS((char *)); -int com_stat PARAMS((char *)); -int com_pwd PARAMS((char *)); -int com_delete PARAMS((char *)); -int com_help PARAMS((char *)); -int com_cd PARAMS((char *)); -int com_quit PARAMS((char *)); - -/* A structure which contains information on the commands this program - can understand. */ - -typedef struct @{ - char *name; /* User printable name of the function. */ - rl_icpfunc_t *func; /* Function to call to do the job. */ - char *doc; /* Documentation for this function. */ -@} COMMAND; - -COMMAND commands[] = @{ - @{ "cd", com_cd, "Change to directory DIR" @}, - @{ "delete", com_delete, "Delete FILE" @}, - @{ "help", com_help, "Display this text" @}, - @{ "?", com_help, "Synonym for `help'" @}, - @{ "list", com_list, "List files in DIR" @}, - @{ "ls", com_list, "Synonym for `list'" @}, - @{ "pwd", com_pwd, "Print the current working directory" @}, - @{ "quit", com_quit, "Quit using Fileman" @}, - @{ "rename", com_rename, "Rename FILE to NEWNAME" @}, - @{ "stat", com_stat, "Print out statistics on FILE" @}, - @{ "view", com_view, "View the contents of FILE" @}, - @{ (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL @} -@}; - -/* Forward declarations. */ -char *stripwhite (); -COMMAND *find_command (); - -/* The name of this program, as taken from argv[0]. */ -char *progname; - -/* When non-zero, this global means the user is done using this program. */ -int done; - -char * -dupstr (s) - char *s; -@{ - char *r; - - r = xmalloc (strlen (s) + 1); - strcpy (r, s); - return (r); -@} - -main (argc, argv) - int argc; - char **argv; -@{ - char *line, *s; - - progname = argv[0]; - - initialize_readline (); /* Bind our completer. */ - - /* Loop reading and executing lines until the user quits. */ - for ( ; done == 0; ) - @{ - line = readline ("FileMan: "); - - if (!line) - break; - - /* Remove leading and trailing whitespace from the line. - Then, if there is anything left, add it to the history list - and execute it. */ - s = stripwhite (line); - - if (*s) - @{ - add_history (s); - execute_line (s); - @} - - free (line); - @} - exit (0); -@} - -/* Execute a command line. */ -int -execute_line (line) - char *line; -@{ - register int i; - COMMAND *command; - char *word; - - /* Isolate the command word. */ - i = 0; - while (line[i] && whitespace (line[i])) - i++; - word = line + i; - - while (line[i] && !whitespace (line[i])) - i++; - - if (line[i]) - line[i++] = '\0'; - - command = find_command (word); - - if (!command) - @{ - fprintf (stderr, "%s: No such command for FileMan.\n", word); - return (-1); - @} - - /* Get argument to command, if any. */ - while (whitespace (line[i])) - i++; - - word = line + i; - - /* Call the function. */ - return ((*(command->func)) (word)); -@} - -/* Look up NAME as the name of a command, and return a pointer to that - command. Return a NULL pointer if NAME isn't a command name. */ -COMMAND * -find_command (name) - char *name; -@{ - register int i; - - for (i = 0; commands[i].name; i++) - if (strcmp (name, commands[i].name) == 0) - return (&commands[i]); - - return ((COMMAND *)NULL); -@} - -/* Strip whitespace from the start and end of STRING. Return a pointer - into STRING. */ -char * -stripwhite (string) - char *string; -@{ - register char *s, *t; - - for (s = string; whitespace (*s); s++) - ; - - if (*s == 0) - return (s); - - t = s + strlen (s) - 1; - while (t > s && whitespace (*t)) - t--; - *++t = '\0'; - - return s; -@} - -/* **************************************************************** */ -/* */ -/* Interface to Readline Completion */ -/* */ -/* **************************************************************** */ - -char *command_generator PARAMS((const char *, int)); -char **fileman_completion PARAMS((const char *, int, int)); - -/* Tell the GNU Readline library how to complete. We want to try to complete - on command names if this is the first word in the line, or on filenames - if not. */ -initialize_readline () -@{ - /* Allow conditional parsing of the ~/.inputrc file. */ - rl_readline_name = "FileMan"; - - /* Tell the completer that we want a crack first. */ - rl_attempted_completion_function = fileman_completion; -@} - -/* Attempt to complete on the contents of TEXT. START and END bound the - region of rl_line_buffer that contains the word to complete. TEXT is - the word to complete. We can use the entire contents of rl_line_buffer - in case we want to do some simple parsing. Return the array of matches, - or NULL if there aren't any. */ -char ** -fileman_completion (text, start, end) - const char *text; - int start, end; -@{ - char **matches; - - matches = (char **)NULL; - - /* If this word is at the start of the line, then it is a command - to complete. Otherwise it is the name of a file in the current - directory. */ - if (start == 0) - matches = rl_completion_matches (text, command_generator); - - return (matches); -@} - -/* Generator function for command completion. STATE lets us know whether - to start from scratch; without any state (i.e. STATE == 0), then we - start at the top of the list. */ -char * -command_generator (text, state) - const char *text; - int state; -@{ - static int list_index, len; - char *name; - - /* If this is a new word to complete, initialize now. This includes - saving the length of TEXT for efficiency, and initializing the index - variable to 0. */ - if (!state) - @{ - list_index = 0; - len = strlen (text); - @} - - /* Return the next name which partially matches from the command list. */ - while (name = commands[list_index].name) - @{ - list_index++; - - if (strncmp (name, text, len) == 0) - return (dupstr(name)); - @} - - /* If no names matched, then return NULL. */ - return ((char *)NULL); -@} - -/* **************************************************************** */ -/* */ -/* FileMan Commands */ -/* */ -/* **************************************************************** */ - -/* String to pass to system (). This is for the LIST, VIEW and RENAME - commands. */ -static char syscom[1024]; - -/* List the file(s) named in arg. */ -com_list (arg) - char *arg; -@{ - if (!arg) - arg = ""; - - sprintf (syscom, "ls -FClg %s", arg); - return (system (syscom)); -@} - -com_view (arg) - char *arg; -@{ - if (!valid_argument ("view", arg)) - return 1; - -#if defined (__MSDOS__) - /* more.com doesn't grok slashes in pathnames */ - sprintf (syscom, "less %s", arg); -#else - sprintf (syscom, "more %s", arg); -#endif - return (system (syscom)); -@} - -com_rename (arg) - char *arg; -@{ - too_dangerous ("rename"); - return (1); -@} - -com_stat (arg) - char *arg; -@{ - struct stat finfo; - - if (!valid_argument ("stat", arg)) - return (1); - - if (stat (arg, &finfo) == -1) - @{ - perror (arg); - return (1); - @} - - printf ("Statistics for `%s':\n", arg); - - printf ("%s has %d link%s, and is %d byte%s in length.\n", - arg, - finfo.st_nlink, - (finfo.st_nlink == 1) ? "" : "s", - finfo.st_size, - (finfo.st_size == 1) ? "" : "s"); - printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); - printf (" Last access at: %s", ctime (&finfo.st_atime)); - printf (" Last modified at: %s", ctime (&finfo.st_mtime)); - return (0); -@} - -com_delete (arg) - char *arg; -@{ - too_dangerous ("delete"); - return (1); -@} - -/* Print out help for ARG, or for all of the commands if ARG is - not present. */ -com_help (arg) - char *arg; -@{ - register int i; - int printed = 0; - - for (i = 0; commands[i].name; i++) - @{ - if (!*arg || (strcmp (arg, commands[i].name) == 0)) - @{ - printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); - printed++; - @} - @} - - if (!printed) - @{ - printf ("No commands match `%s'. Possibilties are:\n", arg); - - for (i = 0; commands[i].name; i++) - @{ - /* Print in six columns. */ - if (printed == 6) - @{ - printed = 0; - printf ("\n"); - @} - - printf ("%s\t", commands[i].name); - printed++; - @} - - if (printed) - printf ("\n"); - @} - return (0); -@} - -/* Change to the directory ARG. */ -com_cd (arg) - char *arg; -@{ - if (chdir (arg) == -1) - @{ - perror (arg); - return 1; - @} - - com_pwd (""); - return (0); -@} - -/* Print out the current working directory. */ -com_pwd (ignore) - char *ignore; -@{ - char dir[1024], *s; - - s = getcwd (dir, sizeof(dir) - 1); - if (s == 0) - @{ - printf ("Error getting pwd: %s\n", dir); - return 1; - @} - - printf ("Current directory is %s\n", dir); - return 0; -@} - -/* The user wishes to quit using this program. Just set DONE non-zero. */ -com_quit (arg) - char *arg; -@{ - done = 1; - return (0); -@} - -/* Function which tells you that you can't do this. */ -too_dangerous (caller) - char *caller; -@{ - fprintf (stderr, - "%s: Too dangerous for me to distribute. Write it yourself.\n", - caller); -@} - -/* Return non-zero if ARG is a valid argument for CALLER, else print - an error message and return zero. */ -int -valid_argument (caller, arg) - char *caller, *arg; -@{ - if (!arg || !*arg) - @{ - fprintf (stderr, "%s: Argument required.\n", caller); - return (0); - @} - - return (1); -@} -@end smallexample diff --git a/readline/doc/rluser.texi b/readline/doc/rluser.texi deleted file mode 100644 index a59bd14463..0000000000 --- a/readline/doc/rluser.texi +++ /dev/null @@ -1,2389 +0,0 @@ -@comment %**start of header (This is for running Texinfo on a region.) -@setfilename rluser.info -@comment %**end of header (This is for running Texinfo on a region.) - -@ignore -This file documents the end user interface to the GNU command line -editing features. It is to be an appendix to manuals for programs which -use these features. There is a document entitled "readline.texinfo" -which contains both end-user and programmer documentation for the -GNU Readline Library. - -Copyright (C) 1988--2016 Free Software Foundation, Inc. - -Authored by Brian Fox and Chet Ramey. - -Permission is granted to process this file through Tex and print the -results, provided the printed document carries copying permission notice -identical to this one except for the removal of this paragraph (this -paragraph not being relevant to the printed manual). - -Permission is granted to make and distribute verbatim copies of this manual -provided the copyright notice and this permission notice are preserved on -all copies. - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -GNU Copyright statement is available to the distributee, and provided that -the entire resulting derived work is distributed under the terms of a -permission notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions. -@end ignore - -@comment If you are including this manual as an appendix, then set the -@comment variable readline-appendix. - -@ifclear BashFeatures -@defcodeindex bt -@end ifclear - -@node Command Line Editing -@chapter Command Line Editing - -This chapter describes the basic features of the @sc{gnu} -command line editing interface. -@ifset BashFeatures -Command line editing is provided by the Readline library, which is -used by several different programs, including Bash. -Command line editing is enabled by default when using an interactive shell, -unless the @option{--noediting} option is supplied at shell invocation. -Line editing is also used when using the @option{-e} option to the -@code{read} builtin command (@pxref{Bash Builtins}). -By default, the line editing commands are similar to those of Emacs. -A vi-style line editing interface is also available. -Line editing can be enabled at any time using the @option{-o emacs} or -@option{-o vi} options to the @code{set} builtin command -(@pxref{The Set Builtin}), or disabled using the @option{+o emacs} or -@option{+o vi} options to @code{set}. -@end ifset - -@menu -* Introduction and Notation:: Notation used in this text. -* Readline Interaction:: The minimum set of commands for editing a line. -* Readline Init File:: Customizing Readline from a user's view. -* Bindable Readline Commands:: A description of most of the Readline commands - available for binding -* Readline vi Mode:: A short description of how to make Readline - behave like the vi editor. -@ifset BashFeatures -* Programmable Completion:: How to specify the possible completions for - a specific command. -* Programmable Completion Builtins:: Builtin commands to specify how to - complete arguments for a particular command. -* A Programmable Completion Example:: An example shell function for - generating possible completions. -@end ifset -@end menu - -@node Introduction and Notation -@section Introduction to Line Editing - -The following paragraphs describe the notation used to represent -keystrokes. - -The text @kbd{C-k} is read as `Control-K' and describes the character -produced when the @key{k} key is pressed while the Control key -is depressed. - -The text @kbd{M-k} is read as `Meta-K' and describes the character -produced when the Meta key (if you have one) is depressed, and the @key{k} -key is pressed. -The Meta key is labeled @key{ALT} on many keyboards. -On keyboards with two keys labeled @key{ALT} (usually to either side of -the space bar), the @key{ALT} on the left side is generally set to -work as a Meta key. -The @key{ALT} key on the right may also be configured to work as a -Meta key or may be configured as some other modifier, such as a -Compose key for typing accented characters. - -If you do not have a Meta or @key{ALT} key, or another key working as -a Meta key, the identical keystroke can be generated by typing @key{ESC} -@emph{first}, and then typing @key{k}. -Either process is known as @dfn{metafying} the @key{k} key. - -The text @kbd{M-C-k} is read as `Meta-Control-k' and describes the -character produced by @dfn{metafying} @kbd{C-k}. - -In addition, several keys have their own names. Specifically, -@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all -stand for themselves when seen in this text, or in an init file -(@pxref{Readline Init File}). -If your keyboard lacks a @key{LFD} key, typing @key{C-j} will -produce the desired character. -The @key{RET} key may be labeled @key{Return} or @key{Enter} on -some keyboards. - -@node Readline Interaction -@section Readline Interaction -@cindex interaction, readline - -Often during an interactive session you type in a long line of text, -only to notice that the first word on the line is misspelled. The -Readline library gives you a set of commands for manipulating the text -as you type it in, allowing you to just fix your typo, and not forcing -you to retype the majority of the line. Using these editing commands, -you move the cursor to the place that needs correction, and delete or -insert the text of the corrections. Then, when you are satisfied with -the line, you simply press @key{RET}. You do not have to be at the -end of the line to press @key{RET}; the entire line is accepted -regardless of the location of the cursor within the line. - -@menu -* Readline Bare Essentials:: The least you need to know about Readline. -* Readline Movement Commands:: Moving about the input line. -* Readline Killing Commands:: How to delete text, and how to get it back! -* Readline Arguments:: Giving numeric arguments to commands. -* Searching:: Searching through previous lines. -@end menu - -@node Readline Bare Essentials -@subsection Readline Bare Essentials -@cindex notation, readline -@cindex command editing -@cindex editing command lines - -In order to enter characters into the line, simply type them. The typed -character appears where the cursor was, and then the cursor moves one -space to the right. If you mistype a character, you can use your -erase character to back up and delete the mistyped character. - -Sometimes you may mistype a character, and -not notice the error until you have typed several other characters. In -that case, you can type @kbd{C-b} to move the cursor to the left, and then -correct your mistake. Afterwards, you can move the cursor to the right -with @kbd{C-f}. - -When you add text in the middle of a line, you will notice that characters -to the right of the cursor are `pushed over' to make room for the text -that you have inserted. Likewise, when you delete text behind the cursor, -characters to the right of the cursor are `pulled back' to fill in the -blank space created by the removal of the text. A list of the bare -essentials for editing the text of an input line follows. - -@table @asis -@item @kbd{C-b} -Move back one character. -@item @kbd{C-f} -Move forward one character. -@item @key{DEL} or @key{Backspace} -Delete the character to the left of the cursor. -@item @kbd{C-d} -Delete the character underneath the cursor. -@item @w{Printing characters} -Insert the character into the line at the cursor. -@item @kbd{C-_} or @kbd{C-x C-u} -Undo the last editing command. You can undo all the way back to an -empty line. -@end table - -@noindent -(Depending on your configuration, the @key{Backspace} key be set to -delete the character to the left of the cursor and the @key{DEL} key set -to delete the character underneath the cursor, like @kbd{C-d}, rather -than the character to the left of the cursor.) - -@node Readline Movement Commands -@subsection Readline Movement Commands - - -The above table describes the most basic keystrokes that you need -in order to do editing of the input line. For your convenience, many -other commands have been added in addition to @kbd{C-b}, @kbd{C-f}, -@kbd{C-d}, and @key{DEL}. Here are some commands for moving more rapidly -about the line. - -@table @kbd -@item C-a -Move to the start of the line. -@item C-e -Move to the end of the line. -@item M-f -Move forward a word, where a word is composed of letters and digits. -@item M-b -Move backward a word. -@item C-l -Clear the screen, reprinting the current line at the top. -@end table - -Notice how @kbd{C-f} moves forward a character, while @kbd{M-f} moves -forward a word. It is a loose convention that control keystrokes -operate on characters while meta keystrokes operate on words. - -@node Readline Killing Commands -@subsection Readline Killing Commands - -@cindex killing text -@cindex yanking text - -@dfn{Killing} text means to delete the text from the line, but to save -it away for later use, usually by @dfn{yanking} (re-inserting) -it back into the line. -(`Cut' and `paste' are more recent jargon for `kill' and `yank'.) - -If the description for a command says that it `kills' text, then you can -be sure that you can get the text back in a different (or the same) -place later. - -When you use a kill command, the text is saved in a @dfn{kill-ring}. -Any number of consecutive kills save all of the killed text together, so -that when you yank it back, you get it all. The kill -ring is not line specific; the text that you killed on a previously -typed line is available to be yanked back later, when you are typing -another line. -@cindex kill ring - -Here is the list of commands for killing text. - -@table @kbd -@item C-k -Kill the text from the current cursor position to the end of the line. - -@item M-d -Kill from the cursor to the end of the current word, or, if between -words, to the end of the next word. -Word boundaries are the same as those used by @kbd{M-f}. - -@item M-@key{DEL} -Kill from the cursor the start of the current word, or, if between -words, to the start of the previous word. -Word boundaries are the same as those used by @kbd{M-b}. - -@item C-w -Kill from the cursor to the previous whitespace. This is different than -@kbd{M-@key{DEL}} because the word boundaries differ. - -@end table - -Here is how to @dfn{yank} the text back into the line. Yanking -means to copy the most-recently-killed text from the kill buffer. - -@table @kbd -@item C-y -Yank the most recently killed text back into the buffer at the cursor. - -@item M-y -Rotate the kill-ring, and yank the new top. You can only do this if -the prior command is @kbd{C-y} or @kbd{M-y}. -@end table - -@node Readline Arguments -@subsection Readline Arguments - -You can pass numeric arguments to Readline commands. Sometimes the -argument acts as a repeat count, other times it is the @i{sign} of the -argument that is significant. If you pass a negative argument to a -command which normally acts in a forward direction, that command will -act in a backward direction. For example, to kill text back to the -start of the line, you might type @samp{M-- C-k}. - -The general way to pass numeric arguments to a command is to type meta -digits before the command. If the first `digit' typed is a minus -sign (@samp{-}), then the sign of the argument will be negative. Once -you have typed one meta digit to get the argument started, you can type -the remainder of the digits, and then the command. For example, to give -the @kbd{C-d} command an argument of 10, you could type @samp{M-1 0 C-d}, -which will delete the next ten characters on the input line. - -@node Searching -@subsection Searching for Commands in the History - -Readline provides commands for searching through the command history -@ifset BashFeatures -(@pxref{Bash History Facilities}) -@end ifset -for lines containing a specified string. -There are two search modes: @dfn{incremental} and @dfn{non-incremental}. - -Incremental searches begin before the user has finished typing the -search string. -As each character of the search string is typed, Readline displays -the next entry from the history matching the string typed so far. -An incremental search requires only as many characters as needed to -find the desired history entry. -To search backward in the history for a particular string, type -@kbd{C-r}. Typing @kbd{C-s} searches forward through the history. -The characters present in the value of the @code{isearch-terminators} variable -are used to terminate an incremental search. -If that variable has not been assigned a value, the @key{ESC} and -@kbd{C-J} characters will terminate an incremental search. -@kbd{C-g} will abort an incremental search and restore the original line. -When the search is terminated, the history entry containing the -search string becomes the current line. - -To find other matching entries in the history list, type @kbd{C-r} or -@kbd{C-s} as appropriate. -This will search backward or forward in the history for the next -entry matching the search string typed so far. -Any other key sequence bound to a Readline command will terminate -the search and execute that command. -For instance, a @key{RET} will terminate the search and accept -the line, thereby executing the command from the history list. -A movement command will terminate the search, make the last line found -the current line, and begin editing. - -Readline remembers the last incremental search string. If two -@kbd{C-r}s are typed without any intervening characters defining a new -search string, any remembered search string is used. - -Non-incremental searches read the entire search string before starting -to search for matching history lines. The search string may be -typed by the user or be part of the contents of the current line. - -@node Readline Init File -@section Readline Init File -@cindex initialization file, readline - -Although the Readline library comes with a set of Emacs-like -keybindings installed by default, it is possible to use a different set -of keybindings. -Any user can customize programs that use Readline by putting -commands in an @dfn{inputrc} file, conventionally in his home directory. -The name of this -@ifset BashFeatures -file is taken from the value of the shell variable @env{INPUTRC}. If -@end ifset -@ifclear BashFeatures -file is taken from the value of the environment variable @env{INPUTRC}. If -@end ifclear -that variable is unset, the default is @file{~/.inputrc}. If that -file does not exist or cannot be read, the ultimate default is -@file{/etc/inputrc}. - -When a program which uses the Readline library starts up, the -init file is read, and the key bindings are set. - -In addition, the @code{C-x C-r} command re-reads this init file, thus -incorporating any changes that you might have made to it. - -@menu -* Readline Init File Syntax:: Syntax for the commands in the inputrc file. - -* Conditional Init Constructs:: Conditional key bindings in the inputrc file. - -* Sample Init File:: An example inputrc file. -@end menu - -@node Readline Init File Syntax -@subsection Readline Init File Syntax - -There are only a few basic constructs allowed in the -Readline init file. Blank lines are ignored. -Lines beginning with a @samp{#} are comments. -Lines beginning with a @samp{$} indicate conditional -constructs (@pxref{Conditional Init Constructs}). Other lines -denote variable settings and key bindings. - -@table @asis -@item Variable Settings -You can modify the run-time behavior of Readline by -altering the values of variables in Readline -using the @code{set} command within the init file. -The syntax is simple: - -@example -set @var{variable} @var{value} -@end example - -@noindent -Here, for example, is how to -change from the default Emacs-like key binding to use -@code{vi} line editing commands: - -@example -set editing-mode vi -@end example - -Variable names and values, where appropriate, are recognized without regard -to case. Unrecognized variable names are ignored. - -Boolean variables (those that can be set to on or off) are set to on if -the value is null or empty, @var{on} (case-insensitive), or 1. Any other -value results in the variable being set to off. - -@ifset BashFeatures -The @w{@code{bind -V}} command lists the current Readline variable names -and values. @xref{Bash Builtins}. -@end ifset - -A great deal of run-time behavior is changeable with the following -variables. - -@cindex variables, readline -@table @code - -@item bell-style -@vindex bell-style -Controls what happens when Readline wants to ring the terminal bell. -If set to @samp{none}, Readline never rings the bell. If set to -@samp{visible}, Readline uses a visible bell if one is available. -If set to @samp{audible} (the default), Readline attempts to ring -the terminal's bell. - -@item bind-tty-special-chars -@vindex bind-tty-special-chars -If set to @samp{on} (the default), Readline attempts to bind the control -characters treated specially by the kernel's terminal driver to their -Readline equivalents. - -@item blink-matching-paren -@vindex blink-matching-paren -If set to @samp{on}, Readline attempts to briefly move the cursor to an -opening parenthesis when a closing parenthesis is inserted. The default -is @samp{off}. - -@item colored-completion-prefix -@vindex colored-completion-prefix -If set to @samp{on}, when listing completions, Readline displays the -common prefix of the set of possible completions using a different color. -The color definitions are taken from the value of the @env{LS_COLORS} -environment variable. -The default is @samp{off}. - -@item colored-stats -@vindex colored-stats -If set to @samp{on}, Readline displays possible completions using different -colors to indicate their file type. -The color definitions are taken from the value of the @env{LS_COLORS} -environment variable. -The default is @samp{off}. - -@item comment-begin -@vindex comment-begin -The string to insert at the beginning of the line when the -@code{insert-comment} command is executed. The default value -is @code{"#"}. - -@item completion-display-width -@vindex completion-display-width -The number of screen columns used to display possible matches -when performing completion. -The value is ignored if it is less than 0 or greater than the terminal -screen width. -A value of 0 will cause matches to be displayed one per line. -The default value is -1. - -@item completion-ignore-case -@vindex completion-ignore-case -If set to @samp{on}, Readline performs filename matching and completion -in a case-insensitive fashion. -The default value is @samp{off}. - -@item completion-map-case -@vindex completion-map-case -If set to @samp{on}, and @var{completion-ignore-case} is enabled, Readline -treats hyphens (@samp{-}) and underscores (@samp{_}) as equivalent when -performing case-insensitive filename matching and completion. -The default value is @samp{off}. - -@item completion-prefix-display-length -@vindex completion-prefix-display-length -The length in characters of the common prefix of a list of possible -completions that is displayed without modification. When set to a -value greater than zero, common prefixes longer than this value are -replaced with an ellipsis when displaying possible completions. - -@item completion-query-items -@vindex completion-query-items -The number of possible completions that determines when the user is -asked whether the list of possibilities should be displayed. -If the number of possible completions is greater than this value, -Readline will ask the user whether or not he wishes to view -them; otherwise, they are simply listed. -This variable must be set to an integer value greater than or equal to 0. -A negative value means Readline should never ask. -The default limit is @code{100}. - -@item convert-meta -@vindex convert-meta -If set to @samp{on}, Readline will convert characters with the -eighth bit set to an @sc{ascii} key sequence by stripping the eighth -bit and prefixing an @key{ESC} character, converting them to a -meta-prefixed key sequence. The default value is @samp{on}, but -will be set to @samp{off} if the locale is one that contains -eight-bit characters. - -@item disable-completion -@vindex disable-completion -If set to @samp{On}, Readline will inhibit word completion. -Completion characters will be inserted into the line as if they had -been mapped to @code{self-insert}. The default is @samp{off}. - -@item echo-control-characters -@vindex echo-control-characters -When set to @samp{on}, on operating systems that indicate they support it, -readline echoes a character corresponding to a signal generated from the -keyboard. The default is @samp{on}. - -@item editing-mode -@vindex editing-mode -The @code{editing-mode} variable controls which default set of -key bindings is used. By default, Readline starts up in Emacs editing -mode, where the keystrokes are most similar to Emacs. This variable can be -set to either @samp{emacs} or @samp{vi}. - -@item emacs-mode-string -@vindex emacs-mode-string -If the @var{show-mode-in-prompt} variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when emacs editing mode is active. The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -The default is @samp{@@}. - -@item enable-bracketed-paste -@vindex enable-bracketed-paste -When set to @samp{On}, Readline will configure the terminal in a way -that will enable it to insert each paste into the editing buffer as a -single string of characters, instead of treating each character as if -it had been read from the keyboard. This can prevent pasted characters -from being interpreted as editing commands. The default is @samp{off}. - -@item enable-keypad -@vindex enable-keypad -When set to @samp{on}, Readline will try to enable the application -keypad when it is called. Some systems need this to enable the -arrow keys. The default is @samp{off}. - -@item enable-meta-key -When set to @samp{on}, Readline will try to enable any meta modifier -key the terminal claims to support when it is called. On many terminals, -the meta key is used to send eight-bit characters. -The default is @samp{on}. - -@item expand-tilde -@vindex expand-tilde -If set to @samp{on}, tilde expansion is performed when Readline -attempts word completion. The default is @samp{off}. - -@item history-preserve-point -@vindex history-preserve-point -If set to @samp{on}, the history code attempts to place the point (the -current cursor position) at the -same location on each history line retrieved with @code{previous-history} -or @code{next-history}. The default is @samp{off}. - -@item history-size -@vindex history-size -Set the maximum number of history entries saved in the history list. -If set to zero, any existing history entries are deleted and no new entries -are saved. -If set to a value less than zero, the number of history entries is not -limited. -By default, the number of history entries is not limited. -If an attempt is made to set @var{history-size} to a non-numeric value, -the maximum number of history entries will be set to 500. - -@item horizontal-scroll-mode -@vindex horizontal-scroll-mode -This variable can be set to either @samp{on} or @samp{off}. Setting it -to @samp{on} means that the text of the lines being edited will scroll -horizontally on a single screen line when they are longer than the width -of the screen, instead of wrapping onto a new screen line. By default, -this variable is set to @samp{off}. - -@item input-meta -@vindex input-meta -@vindex meta-flag -If set to @samp{on}, Readline will enable eight-bit input (it -will not clear the eighth bit in the characters it reads), -regardless of what the terminal claims it can support. The -default value is @samp{off}, but Readline will set it to @samp{on} if the -locale contains eight-bit characters. -The name @code{meta-flag} is a synonym for this variable. - -@item isearch-terminators -@vindex isearch-terminators -The string of characters that should terminate an incremental search without -subsequently executing the character as a command (@pxref{Searching}). -If this variable has not been given a value, the characters @key{ESC} and -@kbd{C-J} will terminate an incremental search. - -@item keymap -@vindex keymap -Sets Readline's idea of the current keymap for key binding commands. -Built-in @code{keymap} names are -@code{emacs}, -@code{emacs-standard}, -@code{emacs-meta}, -@code{emacs-ctlx}, -@code{vi}, -@code{vi-move}, -@code{vi-command}, and -@code{vi-insert}. -@code{vi} is equivalent to @code{vi-command} (@code{vi-move} is also a -synonym); @code{emacs} is equivalent to @code{emacs-standard}. -Applications may add additional names. -The default value is @code{emacs}. -The value of the @code{editing-mode} variable also affects the -default keymap. - -@item keyseq-timeout -Specifies the duration Readline will wait for a character when reading an -ambiguous key sequence (one that can form a complete key sequence using -the input read so far, or can take additional input to complete a longer -key sequence). -If no input is received within the timeout, Readline will use the shorter -but complete key sequence. -Readline uses this value to determine whether or not input is -available on the current input source (@code{rl_instream} by default). -The value is specified in milliseconds, so a value of 1000 means that -Readline will wait one second for additional input. -If this variable is set to a value less than or equal to zero, or to a -non-numeric value, Readline will wait until another key is pressed to -decide which key sequence to complete. -The default value is @code{500}. - -@item mark-directories -If set to @samp{on}, completed directory names have a slash -appended. The default is @samp{on}. - -@item mark-modified-lines -@vindex mark-modified-lines -This variable, when set to @samp{on}, causes Readline to display an -asterisk (@samp{*}) at the start of history lines which have been modified. -This variable is @samp{off} by default. - -@item mark-symlinked-directories -@vindex mark-symlinked-directories -If set to @samp{on}, completed names which are symbolic links -to directories have a slash appended (subject to the value of -@code{mark-directories}). -The default is @samp{off}. - -@item match-hidden-files -@vindex match-hidden-files -This variable, when set to @samp{on}, causes Readline to match files whose -names begin with a @samp{.} (hidden files) when performing filename -completion. -If set to @samp{off}, the leading @samp{.} must be -supplied by the user in the filename to be completed. -This variable is @samp{on} by default. - -@item menu-complete-display-prefix -@vindex menu-complete-display-prefix -If set to @samp{on}, menu completion displays the common prefix of the -list of possible completions (which may be empty) before cycling through -the list. The default is @samp{off}. - -@item output-meta -@vindex output-meta -If set to @samp{on}, Readline will display characters with the -eighth bit set directly rather than as a meta-prefixed escape -sequence. -The default is @samp{off}, but Readline will set it to @samp{on} if the -locale contains eight-bit characters. - -@item page-completions -@vindex page-completions -If set to @samp{on}, Readline uses an internal @code{more}-like pager -to display a screenful of possible completions at a time. -This variable is @samp{on} by default. - -@item print-completions-horizontally -If set to @samp{on}, Readline will display completions with matches -sorted horizontally in alphabetical order, rather than down the screen. -The default is @samp{off}. - -@item revert-all-at-newline -@vindex revert-all-at-newline -If set to @samp{on}, Readline will undo all changes to history lines -before returning when @code{accept-line} is executed. By default, -history lines may be modified and retain individual undo lists across -calls to @code{readline}. The default is @samp{off}. - -@item show-all-if-ambiguous -@vindex show-all-if-ambiguous -This alters the default behavior of the completion functions. If -set to @samp{on}, -words which have more than one possible completion cause the -matches to be listed immediately instead of ringing the bell. -The default value is @samp{off}. - -@item show-all-if-unmodified -@vindex show-all-if-unmodified -This alters the default behavior of the completion functions in -a fashion similar to @var{show-all-if-ambiguous}. -If set to @samp{on}, -words which have more than one possible completion without any -possible partial completion (the possible completions don't share -a common prefix) cause the matches to be listed immediately instead -of ringing the bell. -The default value is @samp{off}. - -@item show-mode-in-prompt -@vindex show-mode-in-prompt -If set to @samp{on}, add a string to the beginning of the prompt -indicating the editing mode: emacs, vi command, or vi insertion. -The mode strings are user-settable (e.g., @var{emacs-mode-string}). -The default value is @samp{off}. - -@item skip-completed-text -@vindex skip-completed-text -If set to @samp{on}, this alters the default completion behavior when -inserting a single match into the line. It's only active when -performing completion in the middle of a word. If enabled, readline -does not insert characters from the completion that match characters -after point in the word being completed, so portions of the word -following the cursor are not duplicated. -For instance, if this is enabled, attempting completion when the cursor -is after the @samp{e} in @samp{Makefile} will result in @samp{Makefile} -rather than @samp{Makefilefile}, assuming there is a single possible -completion. -The default value is @samp{off}. - -@item vi-cmd-mode-string -@vindex vi-cmd-mode-string -If the @var{show-mode-in-prompt} variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when vi editing mode is active and in command mode. -The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -The default is @samp{(cmd)}. - -@item vi-ins-mode-string -@vindex vi-ins-mode-string -If the @var{show-mode-in-prompt} variable is enabled, -this string is displayed immediately before the last line of the primary -prompt when vi editing mode is active and in insertion mode. -The value is expanded like a -key binding, so the standard set of meta- and control prefixes and -backslash escape sequences is available. -Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of -non-printing characters, which can be used to embed a terminal control -sequence into the mode string. -The default is @samp{(ins)}. - -@item visible-stats -@vindex visible-stats -If set to @samp{on}, a character denoting a file's type -is appended to the filename when listing possible -completions. The default is @samp{off}. - -@end table - -@item Key Bindings -The syntax for controlling key bindings in the init file is -simple. First you need to find the name of the command that you -want to change. The following sections contain tables of the command -name, the default keybinding, if any, and a short description of what -the command does. - -Once you know the name of the command, simply place on a line -in the init file the name of the key -you wish to bind the command to, a colon, and then the name of the -command. -There can be no space between the key name and the colon -- that will be -interpreted as part of the key name. -The name of the key can be expressed in different ways, depending on -what you find most comfortable. - -In addition to command names, readline allows keys to be bound -to a string that is inserted when the key is pressed (a @var{macro}). - -@ifset BashFeatures -The @w{@code{bind -p}} command displays Readline function names and -bindings in a format that can put directly into an initialization file. -@xref{Bash Builtins}. -@end ifset - -@table @asis -@item @w{@var{keyname}: @var{function-name} or @var{macro}} -@var{keyname} is the name of a key spelled out in English. For example: -@example -Control-u: universal-argument -Meta-Rubout: backward-kill-word -Control-o: "> output" -@end example - -In the example above, @kbd{C-u} is bound to the function -@code{universal-argument}, -@kbd{M-DEL} is bound to the function @code{backward-kill-word}, and -@kbd{C-o} is bound to run the macro -expressed on the right hand side (that is, to insert the text -@samp{> output} into the line). - -A number of symbolic character names are recognized while -processing this key binding syntax: -@var{DEL}, -@var{ESC}, -@var{ESCAPE}, -@var{LFD}, -@var{NEWLINE}, -@var{RET}, -@var{RETURN}, -@var{RUBOUT}, -@var{SPACE}, -@var{SPC}, -and -@var{TAB}. - -@item @w{"@var{keyseq}": @var{function-name} or @var{macro}} -@var{keyseq} differs from @var{keyname} above in that strings -denoting an entire key sequence can be specified, by placing -the key sequence in double quotes. Some @sc{gnu} Emacs style key -escapes can be used, as in the following example, but the -special character names are not recognized. - -@example -"\C-u": universal-argument -"\C-x\C-r": re-read-init-file -"\e[11~": "Function Key 1" -@end example - -In the above example, @kbd{C-u} is again bound to the function -@code{universal-argument} (just as it was in the first example), -@samp{@kbd{C-x} @kbd{C-r}} is bound to the function @code{re-read-init-file}, -and @samp{@key{ESC} @key{[} @key{1} @key{1} @key{~}} is bound to insert -the text @samp{Function Key 1}. - -@end table - -The following @sc{gnu} Emacs style escape sequences are available when -specifying key sequences: - -@table @code -@item @kbd{\C-} -control prefix -@item @kbd{\M-} -meta prefix -@item @kbd{\e} -an escape character -@item @kbd{\\} -backslash -@item @kbd{\"} -@key{"}, a double quotation mark -@item @kbd{\'} -@key{'}, a single quote or apostrophe -@end table - -In addition to the @sc{gnu} Emacs style escape sequences, a second -set of backslash escapes is available: - -@table @code -@item \a -alert (bell) -@item \b -backspace -@item \d -delete -@item \f -form feed -@item \n -newline -@item \r -carriage return -@item \t -horizontal tab -@item \v -vertical tab -@item \@var{nnn} -the eight-bit character whose value is the octal value @var{nnn} -(one to three digits) -@item \x@var{HH} -the eight-bit character whose value is the hexadecimal value @var{HH} -(one or two hex digits) -@end table - -When entering the text of a macro, single or double quotes must -be used to indicate a macro definition. -Unquoted text is assumed to be a function name. -In the macro body, the backslash escapes described above are expanded. -Backslash will quote any other character in the macro text, -including @samp{"} and @samp{'}. -For example, the following binding will make @samp{@kbd{C-x} \} -insert a single @samp{\} into the line: -@example -"\C-x\\": "\\" -@end example - -@end table - -@node Conditional Init Constructs -@subsection Conditional Init Constructs - -Readline implements a facility similar in spirit to the conditional -compilation features of the C preprocessor which allows key -bindings and variable settings to be performed as the result -of tests. There are four parser directives used. - -@table @code -@item $if -The @code{$if} construct allows bindings to be made based on the -editing mode, the terminal being used, or the application using -Readline. The text of the test, after any comparison operator, -extends to the end of the line; -unless otherwise noted, no characters are required to isolate it. - -@table @code -@item mode -The @code{mode=} form of the @code{$if} directive is used to test -whether Readline is in @code{emacs} or @code{vi} mode. -This may be used in conjunction -with the @samp{set keymap} command, for instance, to set bindings in -the @code{emacs-standard} and @code{emacs-ctlx} keymaps only if -Readline is starting out in @code{emacs} mode. - -@item term -The @code{term=} form may be used to include terminal-specific -key bindings, perhaps to bind the key sequences output by the -terminal's function keys. The word on the right side of the -@samp{=} is tested against both the full name of the terminal and -the portion of the terminal name before the first @samp{-}. This -allows @code{sun} to match both @code{sun} and @code{sun-cmd}, -for instance. - -@item version -The @code{version} test may be used to perform comparisons against -specific Readline versions. -The @code{version} expands to the current Readline version. -The set of comparison operators includes -@samp{=} (and @samp{==}), @samp{!=}, @samp{<=}, @samp{>=}, @samp{<}, -and @samp{>}. -The version number supplied on the right side of the operator consists -of a major version number, an optional decimal point, and an optional -minor version (e.g., @samp{7.1}). If the minor version is omitted, it -is assumed to be @samp{0}. -The operator may be separated from the string @code{version} and -from the version number argument by whitespace. -The following example sets a variable if the Readline version being used -is 7.0 or newer: -@example -$if version >= 7.0 -set show-mode-in-prompt on -$endif -@end example - -@item application -The @var{application} construct is used to include -application-specific settings. Each program using the Readline -library sets the @var{application name}, and you can test for -a particular value. -This could be used to bind key sequences to functions useful for -a specific program. For instance, the following command adds a -key sequence that quotes the current or previous word in Bash: -@example -$if Bash -# Quote the current or previous word -"\C-xq": "\eb\"\ef\"" -$endif -@end example - -@item variable -The @var{variable} construct provides simple equality tests for Readline -variables and values. -The permitted comparison operators are @samp{=}, @samp{==}, and @samp{!=}. -The variable name must be separated from the comparison operator by -whitespace; the operator may be separated from the value on the right hand -side by whitespace. -Both string and boolean variables may be tested. Boolean variables must be -tested against the values @var{on} and @var{off}. -The following example is equivalent to the @code{mode=emacs} test described -above: -@example -$if editing-mode == emacs -set show-mode-in-prompt on -$endif -@end example -@end table - -@item $endif -This command, as seen in the previous example, terminates an -@code{$if} command. - -@item $else -Commands in this branch of the @code{$if} directive are executed if -the test fails. - -@item $include -This directive takes a single filename as an argument and reads commands -and bindings from that file. -For example, the following directive reads from @file{/etc/inputrc}: -@example -$include /etc/inputrc -@end example -@end table - -@node Sample Init File -@subsection Sample Init File - -Here is an example of an @var{inputrc} file. This illustrates key -binding, variable assignment, and conditional syntax. - -@example -@page -# This file controls the behaviour of line input editing for -# programs that use the GNU Readline library. Existing -# programs include FTP, Bash, and GDB. -# -# You can re-read the inputrc file with C-x C-r. -# Lines beginning with '#' are comments. -# -# First, include any system-wide bindings and variable -# assignments from /etc/Inputrc -$include /etc/Inputrc - -# -# Set various bindings for emacs mode. - -set editing-mode emacs - -$if mode=emacs - -Meta-Control-h: backward-kill-word Text after the function name is ignored - -# -# Arrow keys in keypad mode -# -#"\M-OD": backward-char -#"\M-OC": forward-char -#"\M-OA": previous-history -#"\M-OB": next-history -# -# Arrow keys in ANSI mode -# -"\M-[D": backward-char -"\M-[C": forward-char -"\M-[A": previous-history -"\M-[B": next-history -# -# Arrow keys in 8 bit keypad mode -# -#"\M-\C-OD": backward-char -#"\M-\C-OC": forward-char -#"\M-\C-OA": previous-history -#"\M-\C-OB": next-history -# -# Arrow keys in 8 bit ANSI mode -# -#"\M-\C-[D": backward-char -#"\M-\C-[C": forward-char -#"\M-\C-[A": previous-history -#"\M-\C-[B": next-history - -C-q: quoted-insert - -$endif - -# An old-style binding. This happens to be the default. -TAB: complete - -# Macros that are convenient for shell interaction -$if Bash -# edit the path -"\C-xp": "PATH=$@{PATH@}\e\C-e\C-a\ef\C-f" -# prepare to type a quoted word -- -# insert open and close double quotes -# and move to just after the open quote -"\C-x\"": "\"\"\C-b" -# insert a backslash (testing backslash escapes -# in sequences and macros) -"\C-x\\": "\\" -# Quote the current or previous word -"\C-xq": "\eb\"\ef\"" -# Add a binding to refresh the line, which is unbound -"\C-xr": redraw-current-line -# Edit variable on current line. -"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y=" -$endif - -# use a visible bell if one is available -set bell-style visible - -# don't strip characters to 7 bits when reading -set input-meta on - -# allow iso-latin1 characters to be inserted rather -# than converted to prefix-meta sequences -set convert-meta off - -# display characters with the eighth bit set directly -# rather than as meta-prefixed characters -set output-meta on - -# if there are more than 150 possible completions for -# a word, ask the user if he wants to see all of them -set completion-query-items 150 - -# For FTP -$if Ftp -"\C-xg": "get \M-?" -"\C-xt": "put \M-?" -"\M-.": yank-last-arg -$endif -@end example - -@node Bindable Readline Commands -@section Bindable Readline Commands - -@menu -* Commands For Moving:: Moving about the line. -* Commands For History:: Getting at previous lines. -* Commands For Text:: Commands for changing text. -* Commands For Killing:: Commands for killing and yanking. -* Numeric Arguments:: Specifying numeric arguments, repeat counts. -* Commands For Completion:: Getting Readline to do the typing for you. -* Keyboard Macros:: Saving and re-executing typed characters -* Miscellaneous Commands:: Other miscellaneous commands. -@end menu - -This section describes Readline commands that may be bound to key -sequences. -@ifset BashFeatures -You can list your key bindings by executing -@w{@code{bind -P}} or, for a more terse format, suitable for an -@var{inputrc} file, @w{@code{bind -p}}. (@xref{Bash Builtins}.) -@end ifset -Command names without an accompanying key sequence are unbound by default. - -In the following descriptions, @dfn{point} refers to the current cursor -position, and @dfn{mark} refers to a cursor position saved by the -@code{set-mark} command. -The text between the point and mark is referred to as the @dfn{region}. - -@node Commands For Moving -@subsection Commands For Moving -@ftable @code -@item beginning-of-line (C-a) -Move to the start of the current line. - -@item end-of-line (C-e) -Move to the end of the line. - -@item forward-char (C-f) -Move forward a character. - -@item backward-char (C-b) -Move back a character. - -@item forward-word (M-f) -Move forward to the end of the next word. -Words are composed of letters and digits. - -@item backward-word (M-b) -Move back to the start of the current or previous word. -Words are composed of letters and digits. - -@ifset BashFeatures -@item shell-forward-word () -Move forward to the end of the next word. -Words are delimited by non-quoted shell metacharacters. - -@item shell-backward-word () -Move back to the start of the current or previous word. -Words are delimited by non-quoted shell metacharacters. -@end ifset - -@item previous-screen-line () -Attempt to move point to the same physical screen column on the previous -physical screen line. This will not have the desired effect if the current -Readline line does not take up more than one physical line or if point is not -greater than the length of the prompt plus the screen width. - -@item next-screen-line () -Attempt to move point to the same physical screen column on the next -physical screen line. This will not have the desired effect if the current -Readline line does not take up more than one physical line or if the length -of the current Readline line is not greater than the length of the prompt -plus the screen width. - -@item clear-screen (C-l) -Clear the screen and redraw the current line, -leaving the current line at the top of the screen. - -@item redraw-current-line () -Refresh the current line. By default, this is unbound. - -@end ftable - -@node Commands For History -@subsection Commands For Manipulating The History - -@ftable @code -@item accept-line (Newline or Return) -@ifset BashFeatures -Accept the line regardless of where the cursor is. -If this line is -non-empty, add it to the history list according to the setting of -the @env{HISTCONTROL} and @env{HISTIGNORE} variables. -If this line is a modified history line, then restore the history line -to its original state. -@end ifset -@ifclear BashFeatures -Accept the line regardless of where the cursor is. -If this line is -non-empty, it may be added to the history list for future recall with -@code{add_history()}. -If this line is a modified history line, the history line is restored -to its original state. -@end ifclear - -@item previous-history (C-p) -Move `back' through the history list, fetching the previous command. - -@item next-history (C-n) -Move `forward' through the history list, fetching the next command. - -@item beginning-of-history (M-<) -Move to the first line in the history. - -@item end-of-history (M->) -Move to the end of the input history, i.e., the line currently -being entered. - -@item reverse-search-history (C-r) -Search backward starting at the current line and moving `up' through -the history as necessary. This is an incremental search. - -@item forward-search-history (C-s) -Search forward starting at the current line and moving `down' through -the history as necessary. This is an incremental search. - -@item non-incremental-reverse-search-history (M-p) -Search backward starting at the current line and moving `up' -through the history as necessary using a non-incremental search -for a string supplied by the user. -The search string may match anywhere in a history line. - -@item non-incremental-forward-search-history (M-n) -Search forward starting at the current line and moving `down' -through the history as necessary using a non-incremental search -for a string supplied by the user. -The search string may match anywhere in a history line. - -@item history-search-forward () -Search forward through the history for the string of characters -between the start of the current line and the point. -The search string must match at the beginning of a history line. -This is a non-incremental search. -By default, this command is unbound. - -@item history-search-backward () -Search backward through the history for the string of characters -between the start of the current line and the point. -The search string must match at the beginning of a history line. -This is a non-incremental search. -By default, this command is unbound. - -@item history-substring-search-forward () -Search forward through the history for the string of characters -between the start of the current line and the point. -The search string may match anywhere in a history line. -This is a non-incremental search. -By default, this command is unbound. - -@item history-substring-search-backward () -Search backward through the history for the string of characters -between the start of the current line and the point. -The search string may match anywhere in a history line. -This is a non-incremental search. -By default, this command is unbound. - -@item yank-nth-arg (M-C-y) -Insert the first argument to the previous command (usually -the second word on the previous line) at point. -With an argument @var{n}, -insert the @var{n}th word from the previous command (the words -in the previous command begin with word 0). A negative argument -inserts the @var{n}th word from the end of the previous command. -Once the argument @var{n} is computed, the argument is extracted -as if the @samp{!@var{n}} history expansion had been specified. - -@item yank-last-arg (M-. or M-_) -Insert last argument to the previous command (the last word of the -previous history entry). -With a numeric argument, behave exactly like @code{yank-nth-arg}. -Successive calls to @code{yank-last-arg} move back through the history -list, inserting the last word (or the word specified by the argument to -the first call) of each line in turn. -Any numeric argument supplied to these successive calls determines -the direction to move through the history. A negative argument switches -the direction through the history (back or forward). -The history expansion facilities are used to extract the last argument, -as if the @samp{!$} history expansion had been specified. - -@end ftable - -@node Commands For Text -@subsection Commands For Changing Text - -@ftable @code - -@item @i{end-of-file} (usually C-d) -The character indicating end-of-file as set, for example, by -@code{stty}. If this character is read when there are no characters -on the line, and point is at the beginning of the line, Readline -interprets it as the end of input and returns @sc{eof}. - -@item delete-char (C-d) -Delete the character at point. If this function is bound to the -same character as the tty @sc{eof} character, as @kbd{C-d} -commonly is, see above for the effects. - -@item backward-delete-char (Rubout) -Delete the character behind the cursor. A numeric argument means -to kill the characters instead of deleting them. - -@item forward-backward-delete-char () -Delete the character under the cursor, unless the cursor is at the -end of the line, in which case the character behind the cursor is -deleted. By default, this is not bound to a key. - -@item quoted-insert (C-q or C-v) -Add the next character typed to the line verbatim. This is -how to insert key sequences like @kbd{C-q}, for example. - -@ifclear BashFeatures -@item tab-insert (M-@key{TAB}) -Insert a tab character. -@end ifclear - -@item self-insert (a, b, A, 1, !, @dots{}) -Insert yourself. - -@item bracketed-paste-begin () -This function is intended to be bound to the "bracketed paste" escape -sequence sent by some terminals, and such a binding is assigned by default. -It allows Readline to insert the pasted text as a single unit without treating -each character as if it had been read from the keyboard. The characters -are inserted as if each one was bound to @code{self-insert} instead of -executing any editing commands. - -@item transpose-chars (C-t) -Drag the character before the cursor forward over -the character at the cursor, moving the -cursor forward as well. If the insertion point -is at the end of the line, then this -transposes the last two characters of the line. -Negative arguments have no effect. - -@item transpose-words (M-t) -Drag the word before point past the word after point, -moving point past that word as well. -If the insertion point is at the end of the line, this transposes -the last two words on the line. - -@item upcase-word (M-u) -Uppercase the current (or following) word. With a negative argument, -uppercase the previous word, but do not move the cursor. - -@item downcase-word (M-l) -Lowercase the current (or following) word. With a negative argument, -lowercase the previous word, but do not move the cursor. - -@item capitalize-word (M-c) -Capitalize the current (or following) word. With a negative argument, -capitalize the previous word, but do not move the cursor. - -@item overwrite-mode () -Toggle overwrite mode. With an explicit positive numeric argument, -switches to overwrite mode. With an explicit non-positive numeric -argument, switches to insert mode. This command affects only -@code{emacs} mode; @code{vi} mode does overwrite differently. -Each call to @code{readline()} starts in insert mode. - -In overwrite mode, characters bound to @code{self-insert} replace -the text at point rather than pushing the text to the right. -Characters bound to @code{backward-delete-char} replace the character -before point with a space. - -By default, this command is unbound. - -@end ftable - -@node Commands For Killing -@subsection Killing And Yanking - -@ftable @code - -@item kill-line (C-k) -Kill the text from point to the end of the line. - -@item backward-kill-line (C-x Rubout) -Kill backward from the cursor to the beginning of the current line. - -@item unix-line-discard (C-u) -Kill backward from the cursor to the beginning of the current line. - -@item kill-whole-line () -Kill all characters on the current line, no matter where point is. -By default, this is unbound. - -@item kill-word (M-d) -Kill from point to the end of the current word, or if between -words, to the end of the next word. -Word boundaries are the same as @code{forward-word}. - -@item backward-kill-word (M-@key{DEL}) -Kill the word behind point. -Word boundaries are the same as @code{backward-word}. - -@ifset BashFeatures -@item shell-kill-word () -Kill from point to the end of the current word, or if between -words, to the end of the next word. -Word boundaries are the same as @code{shell-forward-word}. - -@item shell-backward-kill-word () -Kill the word behind point. -Word boundaries are the same as @code{shell-backward-word}. -@end ifset - -@item unix-word-rubout (C-w) -Kill the word behind point, using white space as a word boundary. -The killed text is saved on the kill-ring. - -@item unix-filename-rubout () -Kill the word behind point, using white space and the slash character -as the word boundaries. -The killed text is saved on the kill-ring. - -@item delete-horizontal-space () -Delete all spaces and tabs around point. By default, this is unbound. - -@item kill-region () -Kill the text in the current region. -By default, this command is unbound. - -@item copy-region-as-kill () -Copy the text in the region to the kill buffer, so it can be yanked -right away. By default, this command is unbound. - -@item copy-backward-word () -Copy the word before point to the kill buffer. -The word boundaries are the same as @code{backward-word}. -By default, this command is unbound. - -@item copy-forward-word () -Copy the word following point to the kill buffer. -The word boundaries are the same as @code{forward-word}. -By default, this command is unbound. - -@item yank (C-y) -Yank the top of the kill ring into the buffer at point. - -@item yank-pop (M-y) -Rotate the kill-ring, and yank the new top. You can only do this if -the prior command is @code{yank} or @code{yank-pop}. -@end ftable - -@node Numeric Arguments -@subsection Specifying Numeric Arguments -@ftable @code - -@item digit-argument (@kbd{M-0}, @kbd{M-1}, @dots{} @kbd{M--}) -Add this digit to the argument already accumulating, or start a new -argument. @kbd{M--} starts a negative argument. - -@item universal-argument () -This is another way to specify an argument. -If this command is followed by one or more digits, optionally with a -leading minus sign, those digits define the argument. -If the command is followed by digits, executing @code{universal-argument} -again ends the numeric argument, but is otherwise ignored. -As a special case, if this command is immediately followed by a -character that is neither a digit nor minus sign, the argument count -for the next command is multiplied by four. -The argument count is initially one, so executing this function the -first time makes the argument count four, a second time makes the -argument count sixteen, and so on. -By default, this is not bound to a key. -@end ftable - -@node Commands For Completion -@subsection Letting Readline Type For You - -@ftable @code -@item complete (@key{TAB}) -Attempt to perform completion on the text before point. -The actual completion performed is application-specific. -@ifset BashFeatures -Bash attempts completion treating the text as a variable (if the -text begins with @samp{$}), username (if the text begins with -@samp{~}), hostname (if the text begins with @samp{@@}), or -command (including aliases and functions) in turn. If none -of these produces a match, filename completion is attempted. -@end ifset -@ifclear BashFeatures -The default is filename completion. -@end ifclear - -@item possible-completions (M-?) -List the possible completions of the text before point. -When displaying completions, Readline sets the number of columns used -for display to the value of @code{completion-display-width}, the value of -the environment variable @env{COLUMNS}, or the screen width, in that order. - -@item insert-completions (M-*) -Insert all completions of the text before point that would have -been generated by @code{possible-completions}. - -@item menu-complete () -Similar to @code{complete}, but replaces the word to be completed -with a single match from the list of possible completions. -Repeated execution of @code{menu-complete} steps through the list -of possible completions, inserting each match in turn. -At the end of the list of completions, the bell is rung -(subject to the setting of @code{bell-style}) -and the original text is restored. -An argument of @var{n} moves @var{n} positions forward in the list -of matches; a negative argument may be used to move backward -through the list. -This command is intended to be bound to @key{TAB}, but is unbound -by default. - -@item menu-complete-backward () -Identical to @code{menu-complete}, but moves backward through the list -of possible completions, as if @code{menu-complete} had been given a -negative argument. - -@item delete-char-or-list () -Deletes the character under the cursor if not at the beginning or -end of the line (like @code{delete-char}). -If at the end of the line, behaves identically to -@code{possible-completions}. -This command is unbound by default. - -@ifset BashFeatures -@item complete-filename (M-/) -Attempt filename completion on the text before point. - -@item possible-filename-completions (C-x /) -List the possible completions of the text before point, -treating it as a filename. - -@item complete-username (M-~) -Attempt completion on the text before point, treating -it as a username. - -@item possible-username-completions (C-x ~) -List the possible completions of the text before point, -treating it as a username. - -@item complete-variable (M-$) -Attempt completion on the text before point, treating -it as a shell variable. - -@item possible-variable-completions (C-x $) -List the possible completions of the text before point, -treating it as a shell variable. - -@item complete-hostname (M-@@) -Attempt completion on the text before point, treating -it as a hostname. - -@item possible-hostname-completions (C-x @@) -List the possible completions of the text before point, -treating it as a hostname. - -@item complete-command (M-!) -Attempt completion on the text before point, treating -it as a command name. Command completion attempts to -match the text against aliases, reserved words, shell -functions, shell builtins, and finally executable filenames, -in that order. - -@item possible-command-completions (C-x !) -List the possible completions of the text before point, -treating it as a command name. - -@item dynamic-complete-history (M-@key{TAB}) -Attempt completion on the text before point, comparing -the text against lines from the history list for possible -completion matches. - -@item dabbrev-expand () -Attempt menu completion on the text before point, comparing -the text against lines from the history list for possible -completion matches. - -@item complete-into-braces (M-@{) -Perform filename completion and insert the list of possible completions -enclosed within braces so the list is available to the shell -(@pxref{Brace Expansion}). - -@end ifset -@end ftable - -@node Keyboard Macros -@subsection Keyboard Macros -@ftable @code - -@item start-kbd-macro (C-x () -Begin saving the characters typed into the current keyboard macro. - -@item end-kbd-macro (C-x )) -Stop saving the characters typed into the current keyboard macro -and save the definition. - -@item call-last-kbd-macro (C-x e) -Re-execute the last keyboard macro defined, by making the characters -in the macro appear as if typed at the keyboard. - -@item print-last-kbd-macro () -Print the last keboard macro defined in a format suitable for the -@var{inputrc} file. - -@end ftable - -@node Miscellaneous Commands -@subsection Some Miscellaneous Commands -@ftable @code - -@item re-read-init-file (C-x C-r) -Read in the contents of the @var{inputrc} file, and incorporate -any bindings or variable assignments found there. - -@item abort (C-g) -Abort the current editing command and -ring the terminal's bell (subject to the setting of -@code{bell-style}). - -@item do-lowercase-version (M-A, M-B, M-@var{x}, @dots{}) -If the metafied character @var{x} is upper case, run the command -that is bound to the corresponding metafied lower case character. -The behavior is undefined if @var{x} is already lower case. - -@item prefix-meta (@key{ESC}) -Metafy the next character typed. This is for keyboards -without a meta key. Typing @samp{@key{ESC} f} is equivalent to typing -@kbd{M-f}. - -@item undo (C-_ or C-x C-u) -Incremental undo, separately remembered for each line. - -@item revert-line (M-r) -Undo all changes made to this line. This is like executing the @code{undo} -command enough times to get back to the beginning. - -@ifset BashFeatures -@item tilde-expand (M-&) -@end ifset -@ifclear BashFeatures -@item tilde-expand (M-~) -@end ifclear -Perform tilde expansion on the current word. - -@item set-mark (C-@@) -Set the mark to the point. If a -numeric argument is supplied, the mark is set to that position. - -@item exchange-point-and-mark (C-x C-x) -Swap the point with the mark. The current cursor position is set to -the saved position, and the old cursor position is saved as the mark. - -@item character-search (C-]) -A character is read and point is moved to the next occurrence of that -character. A negative count searches for previous occurrences. - -@item character-search-backward (M-C-]) -A character is read and point is moved to the previous occurrence -of that character. A negative count searches for subsequent -occurrences. - -@item skip-csi-sequence () -Read enough characters to consume a multi-key sequence such as those -defined for keys like Home and End. Such sequences begin with a -Control Sequence Indicator (CSI), usually ESC-[. If this sequence is -bound to "\e[", keys producing such sequences will have no effect -unless explicitly bound to a readline command, instead of inserting -stray characters into the editing buffer. This is unbound by default, -but usually bound to ESC-[. - -@item insert-comment (M-#) -Without a numeric argument, the value of the @code{comment-begin} -variable is inserted at the beginning of the current line. -If a numeric argument is supplied, this command acts as a toggle: if -the characters at the beginning of the line do not match the value -of @code{comment-begin}, the value is inserted, otherwise -the characters in @code{comment-begin} are deleted from the beginning of -the line. -In either case, the line is accepted as if a newline had been typed. -@ifset BashFeatures -The default value of @code{comment-begin} causes this command -to make the current line a shell comment. -If a numeric argument causes the comment character to be removed, the line -will be executed by the shell. -@end ifset - -@item dump-functions () -Print all of the functions and their key bindings to the -Readline output stream. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an @var{inputrc} file. This command is unbound by default. - -@item dump-variables () -Print all of the settable variables and their values to the -Readline output stream. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an @var{inputrc} file. This command is unbound by default. - -@item dump-macros () -Print all of the Readline key sequences bound to macros and the -strings they output. If a numeric argument is supplied, -the output is formatted in such a way that it can be made part -of an @var{inputrc} file. This command is unbound by default. - -@ifset BashFeatures -@item glob-complete-word (M-g) -The word before point is treated as a pattern for pathname expansion, -with an asterisk implicitly appended. This pattern is used to -generate a list of matching file names for possible completions. - -@item glob-expand-word (C-x *) -The word before point is treated as a pattern for pathname expansion, -and the list of matching file names is inserted, replacing the word. -If a numeric argument is supplied, a @samp{*} is appended before -pathname expansion. - -@item glob-list-expansions (C-x g) -The list of expansions that would have been generated by -@code{glob-expand-word} is displayed, and the line is redrawn. -If a numeric argument is supplied, a @samp{*} is appended before -pathname expansion. - -@item display-shell-version (C-x C-v) -Display version information about the current instance of Bash. - -@item shell-expand-line (M-C-e) -Expand the line as the shell does. -This performs alias and history expansion as well as all of the shell -word expansions (@pxref{Shell Expansions}). - -@item history-expand-line (M-^) -Perform history expansion on the current line. - -@item magic-space () -Perform history expansion on the current line and insert a space -(@pxref{History Interaction}). - -@item alias-expand-line () -Perform alias expansion on the current line (@pxref{Aliases}). - -@item history-and-alias-expand-line () -Perform history and alias expansion on the current line. - -@item insert-last-argument (M-. or M-_) -A synonym for @code{yank-last-arg}. - -@item operate-and-get-next (C-o) -Accept the current line for execution and fetch the next line -relative to the current line from the history for editing. -A numeric argument, if supplied, specifies the history entry to use instead -of the current line. - -@item edit-and-execute-command (C-x C-e) -Invoke an editor on the current command line, and execute the result as shell -commands. -Bash attempts to invoke -@code{$VISUAL}, @code{$EDITOR}, and @code{emacs} -as the editor, in that order. - -@end ifset - -@ifclear BashFeatures -@item emacs-editing-mode (C-e) -When in @code{vi} command mode, this causes a switch to @code{emacs} -editing mode. - -@item vi-editing-mode (M-C-j) -When in @code{emacs} editing mode, this causes a switch to @code{vi} -editing mode. - -@end ifclear - -@end ftable - -@node Readline vi Mode -@section Readline vi Mode - -While the Readline library does not have a full set of @code{vi} -editing functions, it does contain enough to allow simple editing -of the line. The Readline @code{vi} mode behaves as specified in -the @sc{posix} standard. - -@ifset BashFeatures -In order to switch interactively between @code{emacs} and @code{vi} -editing modes, use the @samp{set -o emacs} and @samp{set -o vi} -commands (@pxref{The Set Builtin}). -@end ifset -@ifclear BashFeatures -In order to switch interactively between @code{emacs} and @code{vi} -editing modes, use the command @kbd{M-C-j} (bound to emacs-editing-mode -when in @code{vi} mode and to vi-editing-mode in @code{emacs} mode). -@end ifclear -The Readline default is @code{emacs} mode. - -When you enter a line in @code{vi} mode, you are already placed in -`insertion' mode, as if you had typed an @samp{i}. Pressing @key{ESC} -switches you into `command' mode, where you can edit the text of the -line with the standard @code{vi} movement keys, move to previous -history lines with @samp{k} and subsequent lines with @samp{j}, and -so forth. - -@ifset BashFeatures -@node Programmable Completion -@section Programmable Completion -@cindex programmable completion - -When word completion is attempted for an argument to a command for -which a completion specification (a @var{compspec}) has been defined -using the @code{complete} builtin (@pxref{Programmable Completion Builtins}), -the programmable completion facilities are invoked. - -First, the command name is identified. -If a compspec has been defined for that command, the -compspec is used to generate the list of possible completions for the word. -If the command word is the empty string (completion attempted at the -beginning of an empty line), any compspec defined with -the @option{-E} option to @code{complete} is used. -If the command word is a full pathname, a compspec for the full -pathname is searched for first. -If no compspec is found for the full pathname, an attempt is made to -find a compspec for the portion following the final slash. -If those searches do not result in a compspec, any compspec defined with -the @option{-D} option to @code{complete} is used as the default. -If there is no default compspec, Bash attempts alias expansion -on the command word as a final resort, and attempts to find a compspec -for the command word from any successful expansion - -Once a compspec has been found, it is used to generate the list of -matching words. -If a compspec is not found, the default Bash completion -described above (@pxref{Commands For Completion}) is performed. - -First, the actions specified by the compspec are used. -Only matches which are prefixed by the word being completed are -returned. -When the @option{-f} or @option{-d} option is used for filename or -directory name completion, the shell variable @env{FIGNORE} is -used to filter the matches. -@xref{Bash Variables}, for a description of @env{FIGNORE}. - -Any completions specified by a filename expansion pattern to the -@option{-G} option are generated next. -The words generated by the pattern need not match the word being completed. -The @env{GLOBIGNORE} shell variable is not used to filter the matches, -but the @env{FIGNORE} shell variable is used. - -Next, the string specified as the argument to the @option{-W} option -is considered. -The string is first split using the characters in the @env{IFS} -special variable as delimiters. -Shell quoting is honored within the string, in order to provide a -mechanism for the words to contain shell metacharacters or characters -in the value of @env{IFS}. -Each word is then expanded using -brace expansion, tilde expansion, parameter and variable expansion, -command substitution, and arithmetic expansion, -as described above (@pxref{Shell Expansions}). -The results are split using the rules described above -(@pxref{Word Splitting}). -The results of the expansion are prefix-matched against the word being -completed, and the matching words become the possible completions. - -After these matches have been generated, any shell function or command -specified with the @option{-F} and @option{-C} options is invoked. -When the command or function is invoked, the @env{COMP_LINE}, -@env{COMP_POINT}, @env{COMP_KEY}, and @env{COMP_TYPE} variables are -assigned values as described above (@pxref{Bash Variables}). -If a shell function is being invoked, the @env{COMP_WORDS} and -@env{COMP_CWORD} variables are also set. -When the function or command is invoked, the first argument ($1) is the -name of the command whose arguments are being completed, the -second argument ($2) is the word being completed, and the third argument -($3) is the word preceding the word being completed on the current command -line. -No filtering of the generated completions against the word being completed -is performed; the function or command has complete freedom in generating -the matches. - -Any function specified with @option{-F} is invoked first. -The function may use any of the shell facilities, including the -@code{compgen} and @code{compopt} builtins described below -(@pxref{Programmable Completion Builtins}), to generate the matches. -It must put the possible completions in the @env{COMPREPLY} array -variable, one per array element. - -Next, any command specified with the @option{-C} option is invoked -in an environment equivalent to command substitution. -It should print a list of completions, one per line, to -the standard output. -Backslash may be used to escape a newline, if necessary. - -After all of the possible completions are generated, any filter -specified with the @option{-X} option is applied to the list. -The filter is a pattern as used for pathname expansion; a @samp{&} -in the pattern is replaced with the text of the word being completed. -A literal @samp{&} may be escaped with a backslash; the backslash -is removed before attempting a match. -Any completion that matches the pattern will be removed from the list. -A leading @samp{!} negates the pattern; in this case any completion -not matching the pattern will be removed. -If the @code{nocasematch} shell option -(see the description of @code{shopt} in @ref{The Shopt Builtin}) -is enabled, the match is performed without regard to the case -of alphabetic characters. - -Finally, any prefix and suffix specified with the @option{-P} and @option{-S} -options are added to each member of the completion list, and the result is -returned to the Readline completion code as the list of possible -completions. - -If the previously-applied actions do not generate any matches, and the -@option{-o dirnames} option was supplied to @code{complete} when the -compspec was defined, directory name completion is attempted. - -If the @option{-o plusdirs} option was supplied to @code{complete} when -the compspec was defined, directory name completion is attempted and any -matches are added to the results of the other actions. - -By default, if a compspec is found, whatever it generates is returned to -the completion code as the full set of possible completions. -The default Bash completions are not attempted, and the Readline default -of filename completion is disabled. -If the @option{-o bashdefault} option was supplied to @code{complete} when -the compspec was defined, the default Bash completions are attempted -if the compspec generates no matches. -If the @option{-o default} option was supplied to @code{complete} when the -compspec was defined, Readline's default completion will be performed -if the compspec (and, if attempted, the default Bash completions) -generate no matches. - -When a compspec indicates that directory name completion is desired, -the programmable completion functions force Readline to append a slash -to completed names which are symbolic links to directories, subject to -the value of the @var{mark-directories} Readline variable, regardless -of the setting of the @var{mark-symlinked-directories} Readline variable. - -There is some support for dynamically modifying completions. This is -most useful when used in combination with a default completion specified -with @option{-D}. It's possible for shell functions executed as completion -handlers to indicate that completion should be retried by returning an -exit status of 124. If a shell function returns 124, and changes -the compspec associated with the command on which completion is being -attempted (supplied as the first argument when the function is executed), -programmable completion restarts from the beginning, with an -attempt to find a new compspec for that command. This allows a set of -completions to be built dynamically as completion is attempted, rather than -being loaded all at once. - -For instance, assuming that there is a library of compspecs, each kept in a -file corresponding to the name of the command, the following default -completion function would load completions dynamically: - -@example -_completion_loader() -@{ - . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124 -@} -complete -D -F _completion_loader -o bashdefault -o default -@end example - -@node Programmable Completion Builtins -@section Programmable Completion Builtins -@cindex completion builtins - -Three builtin commands are available to manipulate the programmable completion -facilities: one to specify how the arguments to a particular command are to -be completed, and two to modify the completion as it is happening. - -@table @code -@item compgen -@btindex compgen -@example -@code{compgen [@var{option}] [@var{word}]} -@end example - -Generate possible completion matches for @var{word} according to -the @var{option}s, which may be any option accepted by the -@code{complete} -builtin with the exception of @option{-p} and @option{-r}, and write -the matches to the standard output. -When using the @option{-F} or @option{-C} options, the various shell variables -set by the programmable completion facilities, while available, will not -have useful values. - -The matches will be generated in the same way as if the programmable -completion code had generated them directly from a completion specification -with the same flags. -If @var{word} is specified, only those completions matching @var{word} -will be displayed. - -The return value is true unless an invalid option is supplied, or no -matches were generated. - -@item complete -@btindex complete -@example -@code{complete [-abcdefgjksuv] [-o @var{comp-option}] [-DEI] [-A @var{action}] [-G @var{globpat}] -[-W @var{wordlist}] [-F @var{function}] [-C @var{command}] [-X @var{filterpat}] -[-P @var{prefix}] [-S @var{suffix}] @var{name} [@var{name} @dots{}]} -@code{complete -pr [-DEI] [@var{name} @dots{}]} -@end example - -Specify how arguments to each @var{name} should be completed. -If the @option{-p} option is supplied, or if no options are supplied, existing -completion specifications are printed in a way that allows them to be -reused as input. -The @option{-r} option removes a completion specification for -each @var{name}, or, if no @var{name}s are supplied, all -completion specifications. -The @option{-D} option indicates that other supplied options and actions should -apply to the ``default'' command completion; that is, completion attempted -on a command for which no completion has previously been defined. -The @option{-E} option indicates that other supplied options and actions should -apply to ``empty'' command completion; that is, completion attempted on a -blank line. -The @option{-I} option indicates that other supplied options and actions should -apply to completion on the inital non-assignment word on the line, or after a -command delimiter such as @samp{;} or @samp{|}, which is usually command -name completion. -If multiple options are supplied, the @option{-D} option takes precedence -over @option{-E}, and both take precedence over @option{-I}. -If any of @option{-D}, @option{-E}, or @option{-I} are supplied, any other -@var{name} arguments are ignored; these completions only apply to the case -specified by the option. - -The process of applying these completion specifications when word completion -is attempted is described above (@pxref{Programmable Completion}). - -Other options, if specified, have the following meanings. -The arguments to the @option{-G}, @option{-W}, and @option{-X} options -(and, if necessary, the @option{-P} and @option{-S} options) -should be quoted to protect them from expansion before the -@code{complete} builtin is invoked. - - -@table @code -@item -o @var{comp-option} -The @var{comp-option} controls several aspects of the compspec's behavior -beyond the simple generation of completions. -@var{comp-option} may be one of: - -@table @code - -@item bashdefault -Perform the rest of the default Bash completions if the compspec -generates no matches. - -@item default -Use Readline's default filename completion if the compspec generates -no matches. - -@item dirnames -Perform directory name completion if the compspec generates no matches. - -@item filenames -Tell Readline that the compspec generates filenames, so it can perform any -filename-specific processing (like adding a slash to directory names, -quoting special characters, or suppressing trailing spaces). -This option is intended to be used with shell functions specified -with @option{-F}. - -@item noquote -Tell Readline not to quote the completed words if they are filenames -(quoting filenames is the default). - -@item nosort -Tell Readline not to sort the list of possible completions alphabetically. - -@item nospace -Tell Readline not to append a space (the default) to words completed at -the end of the line. - -@item plusdirs -After any matches defined by the compspec are generated, -directory name completion is attempted and any -matches are added to the results of the other actions. - -@end table - -@item -A @var{action} -The @var{action} may be one of the following to generate a list of possible -completions: - -@table @code -@item alias -Alias names. May also be specified as @option{-a}. - -@item arrayvar -Array variable names. - -@item binding -Readline key binding names (@pxref{Bindable Readline Commands}). - -@item builtin -Names of shell builtin commands. May also be specified as @option{-b}. - -@item command -Command names. May also be specified as @option{-c}. - -@item directory -Directory names. May also be specified as @option{-d}. - -@item disabled -Names of disabled shell builtins. - -@item enabled -Names of enabled shell builtins. - -@item export -Names of exported shell variables. May also be specified as @option{-e}. - -@item file -File names. May also be specified as @option{-f}. - -@item function -Names of shell functions. - -@item group -Group names. May also be specified as @option{-g}. - -@item helptopic -Help topics as accepted by the @code{help} builtin (@pxref{Bash Builtins}). - -@item hostname -Hostnames, as taken from the file specified by the -@env{HOSTFILE} shell variable (@pxref{Bash Variables}). - -@item job -Job names, if job control is active. May also be specified as @option{-j}. - -@item keyword -Shell reserved words. May also be specified as @option{-k}. - -@item running -Names of running jobs, if job control is active. - -@item service -Service names. May also be specified as @option{-s}. - -@item setopt -Valid arguments for the @option{-o} option to the @code{set} builtin -(@pxref{The Set Builtin}). - -@item shopt -Shell option names as accepted by the @code{shopt} builtin -(@pxref{Bash Builtins}). - -@item signal -Signal names. - -@item stopped -Names of stopped jobs, if job control is active. - -@item user -User names. May also be specified as @option{-u}. - -@item variable -Names of all shell variables. May also be specified as @option{-v}. -@end table - -@item -C @var{command} -@var{command} is executed in a subshell environment, and its output is -used as the possible completions. - -@item -F @var{function} -The shell function @var{function} is executed in the current shell -environment. -When it is executed, $1 is the name of the command whose arguments are -being completed, $2 is the word being completed, and $3 is the word -preceding the word being completed, as described above -(@pxref{Programmable Completion}). -When it finishes, the possible completions are retrieved from the value -of the @env{COMPREPLY} array variable. - -@item -G @var{globpat} -The filename expansion pattern @var{globpat} is expanded to generate -the possible completions. - -@item -P @var{prefix} -@var{prefix} is added at the beginning of each possible completion -after all other options have been applied. - -@item -S @var{suffix} -@var{suffix} is appended to each possible completion -after all other options have been applied. - -@item -W @var{wordlist} -The @var{wordlist} is split using the characters in the -@env{IFS} special variable as delimiters, and each resultant word -is expanded. -The possible completions are the members of the resultant list which -match the word being completed. - -@item -X @var{filterpat} -@var{filterpat} is a pattern as used for filename expansion. -It is applied to the list of possible completions generated by the -preceding options and arguments, and each completion matching -@var{filterpat} is removed from the list. -A leading @samp{!} in @var{filterpat} negates the pattern; in this -case, any completion not matching @var{filterpat} is removed. -@end table - -The return value is true unless an invalid option is supplied, an option -other than @option{-p} or @option{-r} is supplied without a @var{name} -argument, an attempt is made to remove a completion specification for -a @var{name} for which no specification exists, or -an error occurs adding a completion specification. - -@item compopt -@btindex compopt -@example -@code{compopt} [-o @var{option}] [-DEI] [+o @var{option}] [@var{name}] -@end example -Modify completion options for each @var{name} according to the -@var{option}s, or for the currently-executing completion if no @var{name}s -are supplied. -If no @var{option}s are given, display the completion options for each -@var{name} or the current completion. -The possible values of @var{option} are those valid for the @code{complete} -builtin described above. -The @option{-D} option indicates that other supplied options should -apply to the ``default'' command completion; that is, completion attempted -on a command for which no completion has previously been defined. -The @option{-E} option indicates that other supplied options should -apply to ``empty'' command completion; that is, completion attempted on a -blank line. -The @option{-I} option indicates that other supplied options should -apply to completion on the inital non-assignment word on the line, or after a -command delimiter such as @samp{;} or @samp{|}, which is usually command -name completion. - -If multiple options are supplied, the @option{-D} option takes precedence -over @option{-E}, and both take precedence over @option{-I} - -The return value is true unless an invalid option is supplied, an attempt -is made to modify the options for a @var{name} for which no completion -specification exists, or an output error occurs. - -@end table - -@node A Programmable Completion Example -@section A Programmable Completion Example - -The most common way to obtain additional completion functionality beyond -the default actions @code{complete} and @code{compgen} provide is to use -a shell function and bind it to a particular command using @code{complete -F}. - -The following function provides completions for the @code{cd} builtin. -It is a reasonably good example of what shell functions must do when -used for completion. This function uses the word passed as @code{$2} -to determine the directory name to complete. You can also use the -@code{COMP_WORDS} array variable; the current word is indexed by the -@code{COMP_CWORD} variable. - -The function relies on the @code{complete} and @code{compgen} builtins -to do much of the work, adding only the things that the Bash @code{cd} -does beyond accepting basic directory names: -tilde expansion (@pxref{Tilde Expansion}), -searching directories in @var{$CDPATH}, which is described above -(@pxref{Bourne Shell Builtins}), -and basic support for the @code{cdable_vars} shell option -(@pxref{The Shopt Builtin}). -@code{_comp_cd} modifies the value of @var{IFS} so that it contains only -a newline to accommodate file names containing spaces and tabs -- -@code{compgen} prints the possible completions it generates one per line. - -Possible completions go into the @var{COMPREPLY} array variable, one -completion per array element. The programmable completion system retrieves -the completions from there when the function returns. - -@example -# A completion function for the cd builtin -# based on the cd completion function from the bash_completion package -_comp_cd() -@{ - local IFS=$' \t\n' # normalize IFS - local cur _skipdot _cdpath - local i j k - - # Tilde expansion, which also expands tilde to full pathname - case "$2" in - \~*) eval cur="$2" ;; - *) cur=$2 ;; - esac - - # no cdpath or absolute pathname -- straight directory completion - if [[ -z "$@{CDPATH:-@}" ]] || [[ "$cur" == @@(./*|../*|/*) ]]; then - # compgen prints paths one per line; could also use while loop - IFS=$'\n' - COMPREPLY=( $(compgen -d -- "$cur") ) - IFS=$' \t\n' - # CDPATH+directories in the current directory if not in CDPATH - else - IFS=$'\n' - _skipdot=false - # preprocess CDPATH to convert null directory names to . - _cdpath=$@{CDPATH/#:/.:@} - _cdpath=$@{_cdpath//::/:.:@} - _cdpath=$@{_cdpath/%:/:.@} - for i in $@{_cdpath//:/$'\n'@}; do - if [[ $i -ef . ]]; then _skipdot=true; fi - k="$@{#COMPREPLY[@@]@}" - for j in $( compgen -d -- "$i/$cur" ); do - COMPREPLY[k++]=$@{j#$i/@} # cut off directory - done - done - $_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") ) - IFS=$' \t\n' - fi - - # variable names if appropriate shell option set and no completions - if shopt -q cdable_vars && [[ $@{#COMPREPLY[@@]@} -eq 0 ]]; then - COMPREPLY=( $(compgen -v -- "$cur") ) - fi - - return 0 -@} -@end example - -We install the completion function using the @option{-F} option to -@code{complete}: - -@example -# Tell readline to quote appropriate and append slashes to directories; -# use the bash default completion for other arguments -complete -o filenames -o nospace -o bashdefault -F _comp_cd cd -@end example - -@noindent -Since we'd like Bash and Readline to take care of some -of the other details for us, we use several other options to tell Bash -and Readline what to do. The @option{-o filenames} option tells Readline -that the possible completions should be treated as filenames, and quoted -appropriately. That option will also cause Readline to append a slash to -filenames it can determine are directories (which is why we might want to -extend @code{_comp_cd} to append a slash if we're using directories found -via @var{CDPATH}: Readline can't tell those completions are directories). -The @option{-o nospace} option tells Readline to not append a space -character to the directory name, in case we want to append to it. -The @option{-o bashdefault} option brings in the rest of the "Bash default" -completions -- possible completion that Bash adds to the default Readline -set. These include things like command name completion, variable completion -for words beginning with @samp{@{}, completions containing pathname -expansion patterns (@pxref{Filename Expansion}), and so on. - -Once installed using @code{complete}, @code{_comp_cd} will be called every -time we attempt word completion for a @code{cd} command. - -Many more examples -- an extensive collection of completions for most of -the common GNU, Unix, and Linux commands -- are available as part of the -bash_completion project. This is installed by default on many GNU/Linux -distributions. Originally written by Ian Macdonald, the project now lives -at @url{http://bash-completion.alioth.debian.org/}. There are ports for -other systems such as Solaris and Mac OS X. - -An older version of the bash_completion package is distributed with bash -in the @file{examples/complete} subdirectory. - -@end ifset diff --git a/readline/doc/rluserman.texi b/readline/doc/rluserman.texi deleted file mode 100644 index b5754389eb..0000000000 --- a/readline/doc/rluserman.texi +++ /dev/null @@ -1,70 +0,0 @@ -\input texinfo @c -*-texinfo-*- -@comment %**start of header (This is for running Texinfo on a region.) -@setfilename rluserman.info -@settitle GNU Readline Library -@include version.texi - -@comment %**end of header (This is for running Texinfo on a region.) - -@copying -This manual describes the end user interface of the GNU Readline Library -(version @value{VERSION}, @value{UPDATED}), a library which aids in the -consistency of user interface across discrete programs which provide -a command line interface. - -Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. - -@quotation -Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.3 or -any later version published by the Free Software Foundation; with no -Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. -A copy of the license is included in the section entitled -``GNU Free Documentation License''. - -@end quotation -@end copying - -@dircategory Libraries -@direntry -* RLuserman: (rluserman). The GNU readline library User's Manual. -@end direntry - -@titlepage -@title GNU Readline Library User Interface -@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}. -@subtitle @value{UPDATED-MONTH} -@author Chet Ramey, Case Western Reserve University -@author Brian Fox, Free Software Foundation - -@page -@vskip 0pt plus 1filll -@insertcopying - -@end titlepage - -@contents - -@ifnottex -@node Top -@top GNU Readline Library - -This document describes the end user interface of the GNU Readline Library, -a utility which aids in the consistency of user interface across discrete -programs which provide a command line interface. -The Readline home page is @url{http://www.gnu.org/software/readline/}. - -@menu -* Command Line Editing:: GNU Readline User's Manual. -* GNU Free Documentation License:: License for copying this manual. -@end menu -@end ifnottex - -@include rluser.texi - -@node GNU Free Documentation License -@appendix GNU Free Documentation License - -@include fdl.texi - -@bye diff --git a/readline/doc/texi2dvi b/readline/doc/texi2dvi deleted file mode 100755 index 173e8ab4bb..0000000000 --- a/readline/doc/texi2dvi +++ /dev/null @@ -1,1944 +0,0 @@ -#! /bin/sh -# texi2dvi --- produce DVI (or PDF) files from Texinfo (or (La)TeX) sources. -# $Id: texi2dvi 5704 2014-07-07 17:45:16Z karl $ -# -# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 -# Free Software Foundation, Inc. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, -# or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -# Originally written by Noah Friedman. -# -# Please send bug reports, etc. to bug-texinfo@gnu.org. -# If possible, please send a copy of the output of the script called with -# the `--debug' option when making a bug report. - -test -f /bin/ksh && test -z "$RUNNING_KSH" \ - && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \ - && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; } -unset RUNNING_KSH - -# No failure shall remain unpunished. -set -e - -# In case the default sed doesn't suffice. -: ${SED=sed} - -# This string is expanded automatically when this file is checked out. -rcs_revision='$Revision: 5704 $' -rcs_version=`set - $rcs_revision; echo $2` -program=`echo $0 | $SED -e 's!.*/!!'` - -build_mode=${TEXI2DVI_BUILD_MODE:-local} -build_dir=${TEXI2DVI_BUILD_DIRECTORY:-.} - -# Initialize variables for option overriding and otherwise. -# Don't use `unset' since old bourne shells don't have this command. -# Instead, assign them an empty value. -action=compile -batch=false # interact normally -catcode_special=maybe -debug=false -escape="\\" -expand=false # true for expansion via makeinfo -includes= -line_error=true # pass --file-line-error to TeX -max_iters=7 # when to quit -oname= # --output -out_lang=dvi -quiet=false # let the tools' message be displayed -set_language= -src_specials= -shell_escape= -latex2html=hevea # or set to tex4ht -textra= # Extra TeX commands to insert in the input file. -txiprereq=19990129 # minimum texinfo.tex version with macro expansion -verb=false # true for verbose mode -translate_file= # name of charset translation file - -orig_pwd=`pwd` - -# We have to initialize IFS to space tab newline since we save and -# restore IFS and apparently POSIX allows stupid/broken behavior with -# empty-but-set IFS. -# http://lists.gnu.org/archive/html/automake-patches/2006-05/msg00008.html -# We need space, tab and new line, in precisely that order. And don't leave -# trailing blanks. -space=' ' -tab=' ' -newline=' -' -IFS="$space$tab$newline" - -# In case someone pedantic insists on using grep -E. -: ${EGREP=egrep} - -# Systems which define $COMSPEC or $ComSpec use semicolons to separate -# directories in TEXINPUTS -- except for Cygwin et al., where COMSPEC -# might be inherited, but : is used. -if test -n "$COMSPEC$ComSpec" \ - && uname | $EGREP -iv 'cygwin|mingw|djgpp' >/dev/null; then - path_sep=";" -else - path_sep=":" -fi - -# Pacify verbose cds. -CDPATH=${ZSH_VERSION+.}$path_sep - -# If $TEX is set to a directory, don't use it. -test -n "$TEX" && test -d "$TEX" && unset TEX - -# -## --------------------- ## -## Auxiliary functions. ## -## --------------------- ## - -# In case `local' is not supported by the shell, provide a function -# that simulates it by simply performing the assignments. This means -# that we must not expect `local' to work, i.e., we must not (i) rely -# on it during recursion, and (ii) have two local declarations of the -# same variable. (ii) is easy to check statically, and our test suite -# does make sure there is never twice a static local declaration of a -# variable. (i) cannot be checked easily, so just be careful. -# -# Note that since we might use a function simulating `local', we can -# no longer rely on the fact that no IFS-splitting is performed. So, -# while -# -# foo=$bar -# -# is fine (no IFS-splitting), never write -# -# local foo=$bar -# -# but rather -# -# local foo="$bar" -( - foo=bar - test_local () { - local foo=foo - } - test_local >/dev/null 2>&1 - test $foo = bar -) || eval ' -local () { - case $1 in - *=*) eval "$1";; - esac -} -' - - -# cd_orig -# ------- -# Return to the original directory. -cd_orig () -{ - # In case $orig_pwd is on a different drive (for DOS). - cd / - - # Return to the original directory so that - # - the next file is processed in correct conditions - # - the temporary file can be removed - cd "$orig_pwd" || exit 1 -} - -# func_dirname FILE -# ----------------- -# Return the directory part of FILE. -func_dirname () -{ - dirname "$1" 2>/dev/null \ - || { echo "$1" | $SED 's!/[^/]*$!!;s!^$!.!'; } -} - - -# noexit FILE -# ----------- -# Return FILE with one extension remove. foo.bar.baz -> foo.bar. -noext () -{ - echo "$1" | $SED -e 's/\.[^/.][^/.]*$//' -} - - -# absolute NAME -> ABS-NAME -# ------------------------- -# Return an absolute path to NAME. -absolute () -{ - case $1 in - [\\/]* | ?:[\\/]*) - # Absolute paths don't need to be expanded. - echo "$1" - ;; - *) local slashes - slashes=`echo "$1" | $SED -n 's,.*[^/]\(/*\)$,\1,p'` - local rel - rel=$orig_pwd/`func_dirname "$1"` - if test -d "$rel"; then - (cd "$rel" 2>/dev/null \ - && local n - n=`pwd`/`basename "$1"`"$slashes" - echo "$n") - else - error 1 "not a directory: $rel" - fi - ;; - esac -} - - -# ensure_dir DIR1 DIR2... -# ----------------------- -# Make sure the directories exist. -ensure_dir () -{ - for dir - do - # Beware that in parallel builds we may have several concurrent - # attempts to create the directory. So fail only if "mkdir" - # failed *and* the directory still does not exist. - test -d "$dir" \ - || mkdir "$dir" \ - || test -d "$dir" \ - || error 1 "cannot create directory: $dir" - done -} - - -# error EXIT_STATUS LINE1 LINE2... -# -------------------------------- -# Report an error and exit with failure if EXIT_STATUS is non-null. -error () -{ - local s="$1" - shift - report "$@" - if test "$s" != 0; then - exit $s - fi -} - - -# findprog PROG -# ------------- -# Return true if PROG is somewhere in PATH, else false. -findprog () -{ - local saveIFS="$IFS" - IFS=$path_sep # break path components at the path separator - for dir in $PATH; do - IFS=$saveIFS - # The basic test for an executable is `test -f $f && test -x $f'. - # (`test -x' is not enough, because it can also be true for directories.) - # We have to try this both for $1 and $1.exe. - # - # Note: On Cygwin and DJGPP, `test -x' also looks for .exe. On Cygwin, - # also `test -f' has this enhancement, but not on DJGPP. (Both are - # design decisions, so there is little chance to make them consistent.) - # Thusly, it seems to be difficult to make use of these enhancements. - # - if { test -f "$dir/$1" && test -x "$dir/$1"; } \ - || { test -f "$dir/$1.exe" && test -x "$dir/$1.exe"; }; then - return 0 - fi - done - return 1 -} - -# report LINE1 LINE2... -# --------------------- -# Report some information on stderr. -report () -{ - for i in "$@" - do - echo >&2 "$0: $i" - done -} - - -# run COMMAND-LINE -# ---------------- -# Run the COMMAND-LINE verbosely, and catching errors as failures. -run () -{ - verbose "Running $@" - "$@" 2>&5 1>&2 \ - || error 1 "$1 failed" -} - - -# usage -# ----- -# Display usage and exit successfully. -usage () -{ - # We used to simply have `echo "$usage"', but coping with the - # changing behavior of `echo' is much harder than simply using a - # here-doc. - # - # echo '\noto' echo '\\noto' echo -e '\\noto' - # bash 3.1 \noto \\noto \noto - # bash 3.2 %oto \noto -e \noto - # - # where % denotes the eol character. - cat < -General help using GNU software: -EOF - exit 0 -} - - -# verbose WORD1 WORD2 -# ------------------- -# Report some verbose information. -verbose () -{ - if $verb; then - echo >&2 "$0: $@" - fi -} - - -# version -# ------- -# Display version info and exit successfully. -version () -{ - cat < -This is free software: you are free to change and redistribute it. -There is NO WARRANTY, to the extent permitted by law. -EOF - exit 0 -} - - -## ---------------- ## -## Handling lists. ## -## ---------------- ## - - -# list_append LIST-NAME ELEM -# -------------------------- -# Set LIST-NAME to its former contents, with ELEM appended. -list_append () -{ - local la_l="$1" - shift - eval set X \$$la_l "$@" - shift - eval $la_l=\""$@"\" -} - - -# list_concat_dirs LIST-NAME DIR-LIST -# ----------------------------------- -# Append to LIST-NAME all the components (included empty) from -# the $path_sep separated list DIR-LIST. Make the paths absolute. -list_concat_dirs () -{ - local lcd_list="$1" - # Empty path components are meaningful to tex. We rewrite them as - # `EMPTY' so they don't get lost when we split on $path_sep. - # Hopefully no one will have an actual directory named EMPTY. - local replace_EMPTY="-e 's/^$path_sep/EMPTY$path_sep/g' \ - -e 's/$path_sep\$/${path_sep}EMPTY/g' \ - -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'" - save_IFS=$IFS - IFS=$path_sep - set x `echo "$2" | eval $SED $replace_EMPTY`; shift - IFS=$save_IFS - local dir - for dir - do - case $dir in - EMPTY) - list_append $lcd_list "" - ;; - *) - if test -d $dir; then - dir=`absolute "$dir"` - list_append $lcd_list "$dir" - fi - ;; - esac - done -} - - -# list_prefix LIST-NAME SEP -> STRING -# ----------------------------------- -# Return a string that is composed of the LIST-NAME with each item -# preceded by SEP. -list_prefix () -{ - local lp_p="$2" - eval set X \$$1 - shift - local lp_res - for i - do - lp_res="$lp_res \"$lp_p\" \"$i\"" - done - echo "$lp_res" -} - -# list_infix LIST-NAME SEP -> STRING -# ---------------------------------- -# Same as list_prefix, but a separator. -list_infix () -{ - eval set X \$$1 - shift - local la_IFS="$IFS" - IFS=$path_sep - echo "$*" - IFS=$la_IFS -} - -# list_dir_to_abs LIST-NAME -# ------------------------- -# Convert the list to using only absolute dir names. -# Currently unused, but should replace absolute_filenames some day. -list_dir_to_abs () -{ - local ld_l="$1" - eval set X \$$ld_l - shift - local ld_res - for dir - do - dir=`absolute "$dir"` - test -d "$dir" || continue - ld_res="$ld_res \"$dir\"" - done - set X $ld_res; shift - eval $ld_l=\"$@\" -} - - -## ------------------------------ ## -## Language auxiliary functions. ## -## ------------------------------ ## - - -# out_lang_set LANG -# ----------------- -out_lang_set () -{ - case $1 in - dvi|dvipdf|html|info|pdf|ps|text) out_lang=$1;; - *) error 1 "invalid output format: $1";; - esac -} - - -# out_lang_tex -# ------------ -# Return the tex output language (DVI or PDF) for $OUT_LANG. -out_lang_tex () -{ - case $out_lang in - dvi | ps | dvipdf ) echo dvi;; - pdf ) echo $out_lang;; - html | info | text ) echo $out_lang;; - *) error 1 "invalid out_lang: $1";; - esac -} - - -# out_lang_ext -# ------------ -# Return the extension for $OUT_LANG. -out_lang_ext () -{ - case $out_lang in - dvipdf ) echo pdf;; - dvi | html | info | pdf | ps | text ) echo $out_lang;; - *) error 1 "invalid out_lang: $1";; - esac -} - - -## ------------------------- ## -## TeX auxiliary functions. ## -## ------------------------- ## - -# Save TEXINPUTS so we can construct a new TEXINPUTS path for each file. -# Likewise for bibtex and makeindex. -tex_envvars="BIBINPUTS BSTINPUTS DVIPSHEADERS INDEXSTYLE MFINPUTS MPINPUTS \ -TEXINPUTS TFMFONTS" -for var in $tex_envvars; do - eval ${var}_orig=\$$var - export $var -done - - -# absolute_filenames TEX-PATH -> TEX-PATH -# --------------------------------------- -# Convert relative paths to absolute paths, so we can run in another -# directory (e.g., in tidy build mode, or during the macro-support -# detection). Prepend ".". -absolute_filenames () -{ - # Empty path components are meaningful to tex. We rewrite them as - # `EMPTY' so they don't get lost when we split on $path_sep. - # Hopefully no one will have an actual directory named EMPTY. - local replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \ - -e 's/$path_sep\$/${path_sep}EMPTY/g' \ - -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'" - local res - res=`echo "$1" | eval $SED $replace_empty` - save_IFS=$IFS - IFS=$path_sep - set x $res; shift - res=. - for dir - do - case $dir in - EMPTY) - res=$res$path_sep - ;; - *) - if test -d "$dir"; then - res=$res$path_sep`absolute "$dir"` - else - # Even if $dir is not a directory, preserve it in the path. - # It might contain metacharacters that TeX will expand in - # turn, e.g., /some/path/{a,b,c}. This will not get the - # implicit absolutification of the path, but we can't help that. - res=$res$path_sep$dir - fi - ;; - esac - done - echo "$res" -} - - -# output_base_name FILE -# --------------------- -# The name of FILE, possibly renamed to satisfy --output. -# FILE is local, there is no directory part. -output_base_name () -{ - case $oname in - '') echo "$1";; - *) local out_noext - out_noext=`noext "$oname"` - local file_ext - file_ext=`echo "$1" | $SED 's/^.*\.//'` - echo "$out_noext.$file_ext" - ;; - esac -} - - -# destdir -# ------- -# Return the name of the directory where the output is expected. -destdir () -{ - case $oname in - '') echo "$orig_pwd";; - *) dirname "$oname";; - esac -} - - -# move_to_dest FILE... -# -------------------- -# Move FILE to the place where the user expects it. Truly move it, that -# is, it must not remain in its build location unless that is also the -# output location. (Otherwise it might appear as an extra file in make -# distcheck.) -# -# FILE can be the principal output (in which case -o directly applies), or -# an auxiliary file with the same base name. -move_to_dest () -{ -# echo "move_to_dest $*, tidy=$tidy, oname=$oname" - - # If we built in place and have no output name, there is nothing to - # do, so just return. - case $tidy:$oname in - false:) return;; - esac - - local destfile - local destdir - local destbase - local sourcedir - local sourcebase - - for file - do - test -f "$file" \ - || error 1 "no such file or directory: $file" - case $tidy:$oname in - true:) destdir=$orig_pwd - destfile=$destdir/$file;; - true:*) destfile=`output_base_name "$file"` - destdir=`dirname "$destfile"`;; - false:*) destfile=$oname - destdir=`dirname "$destfile"`;; - esac - - # We want to compare the source location and the output location, - # and if they are different, do the move. But if they are the - # same, we must preserve the source. Since we can't assume - # stat(1) or test -ef is available, resort to comparing the - # directory names, canonicalized with pwd. We can't use cmp -s - # since the output file might not actually change from run to run; - # e.g., TeX DVI output is timestamped to only the nearest minute. - destdir=`cd "$destdir" && pwd` - destbase=`basename "$destfile"` - - sourcedir=`dirname "$file"` - sourcedir=`cd "$sourcedir" && pwd` - sourcebase=`basename "$file"` - - if test "$sourcedir/$sourcebase" != "$destdir/$destbase"; then - verbose "Moving $file to $destfile" - rm -f "$destfile" - mv "$file" "$destfile" - fi - done -} - - -## --------------------- ## -## Managing xref files. ## -## --------------------- ## - -# aux_file_p FILE -# --------------- -# Return with success if FILE is an aux file. -aux_file_p () -{ - test -f "$1" || return 1 - case $1 in - *.aux) return 0;; - *) return 1;; - esac -} - -# bibaux_file_p FILE -# ------------------ -# Return with success if FILE is an aux file containing citation -# requests. -bibaux_file_p () -{ - test -s "$1" || return 1 - if (grep '^\\bibstyle[{]' "$1" \ - && grep '^\\bibdata[{]' "$1" \ - ## The following line is suspicious: fails when there - ## are citations in sub aux files. We need to be - ## smarter in this case. - ## && grep '^\\citation[{]' "$f" - ) >&6 2>&1; - then - return 0 - fi - return 1 -} - -# index_file_p FILE -# ----------------- -# Return with success if FILE is an index file. -index_file_p () -{ - test -f "$1" || return 1 - case $in_lang:$latex2html:`out_lang_tex`:`$SED '1q' "$1"` in - # When working with TeX4HT, *.idx are created by LaTeX. They must - # be processed to produce *.4ix, *.4dx files. The *.4dx file is - # passed to makeindex to produce the *.ind file. This sequence is - # handled by run_index, so we are only interested in the *.idx - # files, which have each "\indexentry" preceded by a - # "\beforeentry". - latex:tex4ht:html:"\\beforeentry {"*) return 0;; - - # When index.sty is used, there is a space before the brace. - latex:*:*:"\\indexentry{"*|latex:*:*:"\\indexentry {"*) return 0;; - - texinfo:*:*:"\\entry{"*) return 0;; - - *) return 1;; - esac -} - -# xref_file_p FILE -# ---------------- -# Return with success if FILE is an xref file (indexes, tables and lists). -xref_file_p () -{ - test -f "$1" || return 1 - # If the file is not suitable to be an index or xref file, don't - # process it. It's suitable if the first character is a - # backslash or right quote or at, as long as the first line isn't - # \input texinfo. - case `$SED '1q' "$1"` in - "\\input texinfo"*) return 1;; - [\\''@]*) return 0;; - *) return 1;; - esac -} - - -# generated_files_get FILENAME-NOEXT [PREDICATE-FILTER] -# ----------------------------------------------------- -# Return the list of files generated by the TeX compilation of FILENAME-NOEXT. -generated_files_get () -{ - local filter=true - if test -n "$2"; then - filter=$2 - fi - - # Gather the files created by TeX. - ( - if test -f "$1.log"; then - $SED -n -e "s,^\\\\openout.* = \`\\(.*\\)'\\.,\\1,p" "$1.log" - fi - echo "$1.log" - ) | - # Depending on these files, infer outputs from other tools. - while read file; do - echo $file - case $in_lang in - texinfo) - # texindex: texinfo.cp -> texinfo.cps - if index_file_p $file; then - echo ${file}s - fi - ;; - latex) - if aux_file_p $file; then - # bibtex: *.aux -> *.bbl and *.blg. - echo $file | $SED 's/^\(.*\)\.aux$/\1.bbl/' - echo $file | $SED 's/^\(.*\)\.aux$/\1.blg/' - # -recorder: .fls - echo $file | $SED 's/^\(.*\)\.aux$/\1.fls/' - fi - ;; - esac - done | - # Filter existing files matching the criterion. - # - # With an input file name containing a space, this produces a - # "command not found" message (and filtering is ineffective). - # The situation with a newline is presumably even worse. - while read file; do - if $filter "$file"; then - echo $file - fi - done | - sort | - # Some files are opened several times, e.g., listings.sty's *.vrb. - uniq -} - - -# xref_files_save -# --------------- -# Save the xref files. -xref_files_save () -{ - # Save copies of auxiliary files for later comparison. - xref_files_orig=`generated_files_get "$in_noext" xref_file_p` - if test -n "$xref_files_orig"; then - verbose "Backing up xref files: $xref_files_orig" - # The following line improves `cp $xref_files_orig "$work_bak"' - # by preserving the directory parts. Think of - # cp chap1/main.aux chap2/main.aux $work_bak. - # - # Users may have, e.g., --keep-old-files. Don't let this interfere. - # (Don't use unset for the sake of ancient shells.) - TAR_OPTIONS=; export TAR_OPTIONS - tar cf - $xref_files_orig | (cd "$work_bak" && tar xf -) - fi -} - - -# xref_files_changed -# ------------------ -# Whether the xref files were changed since the previous run. -xref_files_changed () -{ - # LaTeX (and the package changebar) report in the LOG file if it - # should be rerun. This is needed for files included from - # subdirs, since texi2dvi does not try to compare xref files in - # subdirs. Performing xref files test is still good since LaTeX - # does not report changes in xref files. - if grep "Rerun to get" "$in_noext.log" >&6 2>&1; then - return 0 - fi - # biblatex report of whether rerunning is needed. - if grep "biblatex.*(re)run" "$in_noext.log" >&6 2>&1; then - return 0 - fi - - # If old and new lists don't have the same file list, - # then something has definitely changed. - xref_files_new=`generated_files_get "$in_noext" xref_file_p` - verbose "Original xref files = $xref_files_orig" - verbose "New xref files = $xref_files_new" - if test "x$xref_files_orig" != "x$xref_files_new"; then - return 0 - fi - - # Compare each file until we find a difference. - for this_file in $xref_files_new; do - verbose "Comparing xref file `echo $this_file | $SED 's|\./||g'` ..." - # cmp -s returns nonzero exit status if files differ. - if cmp -s "$this_file" "$work_bak/$this_file"; then :; else - verbose "xref file `echo $this_file | $SED 's|\./||g'` differed ..." - if $debug; then - diff -u "$work_bak/$this_file" "$this_file" - fi - return 0 - fi - done - - # No change. - return 1 -} - - - -## ----------------------- ## -## Running the TeX suite. ## -## ----------------------- ## - - - -# run_tex () -# ---------- -# Run TeX as "$tex $in_input", taking care of errors and logs. -run_tex () -{ - case $in_lang:$latex2html:`out_lang_tex` in - latex:*:dvi|latex:tex4ht:html) - tex=${LATEX:-latex};; - latex:*:pdf) - tex=${PDFLATEX:-pdflatex};; - texinfo:*:dvi) - # MetaPost also uses the TEX environment variable. If the user - # has set TEX=latex for that reason, don't bomb out. - case $TEX in - *latex) tex=tex;; # don't bother trying to find etex - *) tex=$TEX - esac;; - texinfo:*:pdf) tex=$PDFTEX;; - - *) error 1 "$out_lang not supported for $in_lang";; - esac - - # do the special catcode trick for ~ in filenames only for Texinfo, - # not LaTeX. - if test x"$in_lang" = xtexinfo && test $catcode_special = maybe; then - catcode_special=true - else - catcode_special=false - fi - - # Beware of aux files in subdirectories that require the - # subdirectory to exist. - case $in_lang:$tidy in - latex:true) - $SED -n 's|^[ ]*\\include{\(.*\)/.*}.*|\1|p' "$in_input" | - sort -u | - while read d - do - ensure_dir "$work_build/$d" - done - ;; - esac - - # Note that this will be used via an eval: quote properly. - local cmd="$tex" - - # If possible, make TeX report error locations in GNU format. - if $line_error; then - if test "${tex_help:+set}" != set; then - # Go to a temporary directory to try --help, since old versions that - # don't accept --help will generate a texput.log. - tex_help_dir=$t2ddir/tex_help - ensure_dir "$tex_help_dir" - tex_help=`cd "$tex_help_dir" >&6 && $tex --help &1 || true` - fi - # The mk program and perhaps others want to parse TeX's - # original error messages. - case $tex_help in - *file-line-error*) cmd="$cmd --file-line-error";; - esac - fi - - # Tell TeX about TCX file, if specified. - test -n "$translate_file" && cmd="$cmd --translate-file=$translate_file" - - # Tell TeX to make source specials (for backtracking from output to - # source, given a sufficiently smart editor), if specified. - test -n "$src_specials" && cmd="$cmd $src_specials" - - # Tell TeX to allow running external executables - test -n "$shell_escape" && cmd="$cmd $shell_escape" - - # Tell TeX to be batch if requested. - if $batch; then - # \batchmode does not show terminal output at all, so we don't - # want that. And even in batch mode, TeX insists on having input - # from the user. Close its stdin to make it impossible. - cmd="$cmd &5; then - case $out_lang in - dvi | pdf ) move_to_dest "$in_noext.$out_lang";; - esac - else - error 1 "$tex exited with bad status, quitting." - fi -} - -# run_bibtex () -# ------------- -# Run bibtex on (or biber) current file. -# - If its input (AUX) exists. -# - If some citations are missing (LOG contains `Citation'). -# or the LOG complains of a missing .bbl -# -# Don't try to be too smart: -# 1. Running bibtex only if the bbl file exists and is older than -# the LaTeX file is wrong, since the document might include files -# that have changed. -# -# 3. Because there can be several AUX (if there are \include's), -# but a single LOG, looking for missing citations in LOG is -# easier, though we take the risk of matching false messages. -run_bibtex () -{ - case $in_lang in - latex) bibtex=${BIBTEX:-bibtex};; - texinfo) return;; - esac - - # "Citation undefined" is for LaTeX, "Undefined citation" for btxmac.tex. - # The no .aux && \bibdata test is also for btxmac, in case it was the - # first run of a bibtex-using document. Otherwise, it's possible that - # bibtex would never be run. - if test -r "$in_noext.aux" \ - && test -r "$in_noext.log" \ - && ( (grep 'Warning:.*Citation.*undefined' "$in_noext.log" \ - || grep '.*Undefined citation' "$in_noext.log" \ - || grep 'No file .*\.bbl\.' "$in_noext.log") \ - || (grep 'No \.aux file' "$in_noext.log" \ - && grep '^\\bibdata' "$in_noext.aux") ) \ - >&6 2>&1; \ - then - bibtex_aux=`generated_files_get "$in_noext" bibaux_file_p` - for f in $bibtex_aux; do - run $bibtex "$f" - done - fi - - # biber(+biblatex) check. - if test -r "$in_noext.bcf" \ - && grep '' "$in_noext.bcf" >/dev/null; then - run ${BIBER:-biber} "$in_noext" - fi -} - -# run_index () -# ------------ -# Run texindex (or makeindex or texindy) on current index files. If -# they already exist, and after running TeX a first time the index -# files don't change, then there's no reason to run TeX again. But we -# won't know that if the index files are out of date or nonexistent. -run_index () -{ - local index_files - index_files=`generated_files_get $in_noext index_file_p` - test -n "$index_files" \ - || return 0 - - : ${MAKEINDEX:=makeindex} - : ${TEXINDEX:=texindex} - : ${TEXINDY:=texindy} - - local index_file - local index_noext - case $in_lang:$latex2html:`out_lang_tex` in - latex:tex4ht:html) - for index_file in $index_files - do - index_noext=`noext "$index_file"` - run tex \ - '\def\filename{{'"$index_noext"'}{idx}{4dx}{ind}} - \input idxmake.4ht' - run $MAKEINDEX -o $index_noext.ind $index_noext.4dx - done - ;; - - latex:*) - if $TEXINDY --version >&6 2>&1; then - run $TEXINDY $index_files - else - run $MAKEINDEX $index_files - fi - ;; - - texinfo:*) - run $TEXINDEX $index_files - ;; - esac -} - - -# run_tex4ht () -# ------------- -# Run the last two phases of TeX4HT: tex4ht extracts the HTML from the -# instrumented DVI file, and t4ht converts the figures and installs -# the files when given -d. -# -# Because knowing exactly which files are created is complex (in -# addition the names are not simple to compute), which makes it -# difficult to install the output files in a second step, it is much -# simpler to install directly the output files. -run_tex4ht () -{ - case $in_lang:$latex2html:`out_lang_tex` in - latex:tex4ht:html) - : ${TEX4HT:=tex4ht} ${T4HT:=t4ht} - run "$TEX4HT" "-f/$in_noext" - # Do not remove the / after the destdir. - run "$T4HT" "-d`destdir`/" "-f/$in_noext" - ;; - esac -} - - -# run_thumbpdf () -# --------------- -run_thumbpdf () -{ - if test `out_lang_tex` = pdf \ - && test -r "$in_noext.log" \ - && grep 'thumbpdf\.sty' "$in_noext.log" >&6 2>&1; \ - then - thumbpdf=${THUMBPDF_CMD:-thumbpdf} - thumbcmd="$thumbpdf $in_dir/$in_noext" - verbose "Running $thumbcmd ..." - if $thumbcmd >&5; then - run_tex - else - report "$thumbpdf exited with bad status." \ - "Ignoring its output." - fi - fi -} - - -# run_dvipdf FILE.dvi -# ------------------- -# Convert FILE.dvi to FILE.pdf. -run_dvipdf () -{ - # Find which dvi->pdf program is available. - if test -z "$dvipdf"; then - for i in "$DVIPDF" dvipdfmx dvipdfm dvipdf dvi2pdf dvitopdf; do - if findprog $i; then - dvipdf=$i - fi - done - fi - # These tools have varying interfaces, some 'input output', others - # 'input -o output'. They all seem to accept 'input' only, - # outputting using the expected file name. - run $dvipdf "$1" - if test ! -f `echo "$1" | $SED -e 's/\.dvi$/.pdf/'`; then - error 1 "cannot find output file" - fi -} - -# run_tex_suite () -# ---------------- -# Run the TeX tools until a fix point is reached. -run_tex_suite () -{ - # Move to the working directory. - if $tidy; then - verbose "cd $work_build" - cd "$work_build" || exit 1 - fi - - # Count the number of cycles. - local cycle=0 - - while :; do - # check for probably LaTeX loop (e.g. varioref) - if test $cycle -eq "$max_iters"; then - error 0 "Maximum of $max_iters cycles exceeded" - break - fi - - # report progress - cycle=`expr $cycle + 1` - verbose "Cycle $cycle for $command_line_filename" - - xref_files_save - - # We run bibtex first, because it's more likely for the indexes - # to change after bibtex is run than the reverse, though either - # would be rare. - run_bibtex - run_index - run_core_conversion - - xref_files_changed || break - done - - # If we were using thumbpdf and producing PDF, then run thumbpdf - # and TeX one last time. - run_thumbpdf - - # If we are using tex4ht, call it. - run_tex4ht - - # Install the result if we didn't already (i.e., if the output is - # dvipdf or ps). - case $latex2html:$out_lang in - *:dvipdf) - run_dvipdf "$in_noext.`out_lang_tex`" - move_to_dest "$in_noext.`out_lang_ext`" - ;; - *:ps) - : ${DVIPS:=dvips} - run $DVIPS -o "$in_noext.`out_lang_ext`" "$in_noext.`out_lang_tex`" - move_to_dest "$in_noext.`out_lang_ext`" - ;; - esac - - cd_orig -} - -## -------------------------------- ## -## TeX processing auxiliary tools. ## -## -------------------------------- ## - - -# A sed script that preprocesses Texinfo sources in order to keep the -# iftex sections only. We want to remove non-TeX sections, and comment -# (with `@c _texi2dvi') TeX sections so that makeinfo does not try to -# parse them. Nevertheless, while commenting TeX sections, don't -# comment @macro/@end macro so that makeinfo does propagate them. -# Unfortunately makeinfo --iftex --no-ifinfo doesn't work well enough -# (yet), makeinfo can't parse the TeX commands, so work around with sed. -# -# We assume that `@c _texi2dvi' starting a line is not present in the -# document. -# -comment_iftex=\ -'/^@tex/,/^@end tex/{ - s/^/@c _texi2dvi/ -} -/^@iftex/,/^@end iftex/{ - s/^/@c _texi2dvi/ - /^@c _texi2dvi@macro/,/^@c _texi2dvi@end macro/{ - s/^@c _texi2dvi// - } -} -/^@ifnottex/,/^@end ifnottex/{ - s/^/@c (_texi2dvi)/ -} -/^@ifinfo/,/^@end ifinfo/{ - /^@node/p - /^@menu/,/^@end menu/p - t - s/^/@c (_texi2dvi)/ -} -s/^@ifnotinfo/@c _texi2dvi@ifnotinfo/ -s/^@end ifnotinfo/@c _texi2dvi@end ifnotinfo/' - -# Uncommenting is simpler: remove any leading `@c texi2dvi'; repeated -# copies can sneak in via macro invocations. -uncomment_iftex='s/^@c _texi2dvi\(@c _texi2dvi\)*//' - - -# run_makeinfo () -# --------------- -# Expand macro commands in the original source file using Makeinfo. -# Always use `end' footnote style, since the `separate' style -# generates different output (arguably this is a bug in -E). Discard -# main info output, the user asked to run TeX, not makeinfo. -run_makeinfo () -{ - test $in_lang = texinfo \ - || return 0 - - # Unless required by the user, makeinfo expansion is wanted only - # if texinfo.tex is too old. - if $expand; then - makeinfo=${MAKEINFO:-makeinfo} - else - # Check if texinfo.tex performs macro expansion by looking for - # its version. The version is a date of the form YEAR-MO-DA. - # We don't need to use [0-9] to match the digits since anyway - # the comparison with $txiprereq, a number, will fail with non-digits. - # Run in a temporary directory to avoid leaving files. - version_test_dir=$t2ddir/version_test - ensure_dir "$version_test_dir" - if ( - cd "$version_test_dir" - echo '\input texinfo.tex @bye' >txiversion.tex - # Be sure that if tex wants to fail, it is not interactive: - # close stdin. - $TEX txiversion.tex txiversion.out 2>txiversion.err - ); then :; else - report "texinfo.tex appears to be broken. -This may be due to the environment variable TEX set to something -other than (plain) tex, a corrupt texinfo.tex file, or -to tex itself simply not working." - cat "$version_test_dir/txiversion.out" - cat "$version_test_dir/txiversion.err" >&2 - error 1 "quitting." - fi - eval `$SED -n 's/^.*\[\(.*\)version \(....\)-\(..\)-\(..\).*$/txiformat=\1 txiversion="\2\3\4"/p' "$version_test_dir/txiversion.out"` - verbose "texinfo.tex preloaded as \`$txiformat', version is \`$txiversion' ..." - if test "$txiprereq" -le "$txiversion" >&6 2>&1; then - makeinfo= - else - makeinfo=${MAKEINFO:-makeinfo} - fi - # If TeX is preloaded, offer the user this convenience: - if test "$txiformat" = Texinfo; then - escape=@ - fi - fi - - if test -n "$makeinfo"; then - # in_src: the file with macros expanded. - # Use the same basename to generate the same aux file names. - work_src=$workdir/src - ensure_dir "$work_src" - in_src=$work_src/$in_base - local miincludes - miincludes=`list_prefix includes -I` - verbose "Macro-expanding $command_line_filename to $in_src ..." - # eval $makeinfo because it might be defined as something complex - # (running missing) and then we end up with things like '"-I"', - # and "-I" (including the quotes) is not an option name. This - # happens with gettext 0.14.5, at least. - $SED "$comment_iftex" "$command_line_filename" \ - | eval $makeinfo --footnote-style=end -I "$in_dir" $miincludes \ - -o /dev/null --macro-expand=- \ - | $SED "$uncomment_iftex" >"$in_src" - # Continue only if everything succeeded. - if test $? -ne 0 \ - || test ! -r "$in_src"; then - verbose "Expansion failed, ignored..."; - else - in_input=$in_src - fi - fi -} - -# insert_commands () -# ------------------ -# Used most commonly for @finalout, @smallbook, etc. -insert_commands () -{ - if test -n "$textra"; then - # _xtr. The file with the user's extra commands. - work_xtr=$workdir/xtr - in_xtr=$work_xtr/$in_base - ensure_dir "$work_xtr" - verbose "Inserting extra commands: $textra" - local textra_cmd - case $in_lang in - latex) textra_cmd=1i;; - texinfo) textra_cmd='/^@setfilename/a';; - *) error 1 "internal error, unknown language: $in_lang";; - esac - $SED "$textra_cmd\\ -$textra" "$in_input" >"$in_xtr" - in_input=$in_xtr - fi - - case $in_lang:$latex2html:`out_lang_tex` in - latex:tex4ht:html) - # _tex4ht. The file with the added \usepackage{tex4ht}. - work_tex4ht=$workdir/tex4ht - in_tex4ht=$work_tex4ht/$in_base - ensure_dir "$work_tex4ht" - verbose "Inserting \\usepackage{tex4ht}" - perl -pe 's<\\documentclass(?:\[.*\])?{.*}> - <$&\\usepackage[xhtml]{tex4ht}>' \ - "$in_input" >"$in_tex4ht" - in_input=$in_tex4ht - ;; - esac -} - -# compute_language FILENAME -# ------------------------- -# Return the short string describing the language in which FILENAME -# is written: `texinfo' or `latex'. -compute_language () -{ - # If the user explicitly specified the language, use that. - # Otherwise, if the first line is \input texinfo, assume it's texinfo. - # Otherwise, guess from the file extension. - if test -n "$set_language"; then - echo $set_language - elif $SED 1q "$1" | grep 'input texinfo' >&6; then - echo texinfo - else - # Get the type of the file (latex or texinfo) from the given language - # we just guessed, or from the file extension if not set yet. - case $1 in - *.ltx | *.tex | *.drv | *.dtx) echo latex;; - *) echo texinfo;; - esac - fi -} - - -# run_hevea (MODE) -# ---------------- -# Convert to HTML/INFO/TEXT. -# -# Don't pass `-noiso' to hevea: it's useless in HTML since anyway the -# charset is set to latin1, and troublesome in other modes since -# accented characters loose their accents. -# -# Don't pass `-o DEST' to hevea because in that case it leaves all its -# auxiliary files there too... Too bad, because it means we will need -# to handle images some day. -run_hevea () -{ - local hevea="${HEVEA:-hevea}" - local run_hevea="$hevea" - - case $1 in - html) ;; - text|info) run_hevea="$run_hevea -$1";; - *) error 1 "run_hevea: invalid argument: $1";; - esac - - # Compiling to the tmp directory enables to preserve a previous - # successful compilation. - run_hevea="$run_hevea -fix -O -o '$out_base'" - run_hevea="$run_hevea `list_prefix includes -I` -I '$orig_pwd' " - run_hevea="$run_hevea '$in_input'" - - if $debug; then - run_hevea="$run_hevea -v -v" - fi - - verbose "running $run_hevea" - if eval "$run_hevea" >&5; then - # hevea leaves trailing white spaces, this is annoying. - case $1 in text|info) - perl -pi -e 's/[ \t]+$//g' "$out_base"*;; - esac - case $1 in - html|text) move_to_dest "$out_base";; - info) # There can be foo.info-1, foo.info-2 etc. - move_to_dest "$out_base"*;; - esac - else - error 1 "$hevea exited with bad status, quitting." - fi -} - - -# run_core_conversion () -# ---------------------- -# Run the TeX (or HeVeA). -run_core_conversion () -{ - case $in_lang:$latex2html:`out_lang_tex` in - *:dvi|*:pdf|latex:tex4ht:html) - run_tex;; - latex:*:html|latex:*:text|latex:*:info) - run_hevea $out_lang;; - *) - error 1 "invalid input/output combination: $in_lang/$out_lang";; - esac -} - - -# compile () -# ---------- -# Run the full compilation chain, from pre-processing to installation -# of the output at its expected location. -compile () -{ - # Source file might include additional sources. - # We want `.:$orig_pwd' before anything else. (We'll add `.:' later - # after all other directories have been turned into absolute paths.) - # `.' goes first to ensure that any old .aux, .cps, - # etc. files in ${directory} don't get used in preference to fresher - # files in `.'. Include orig_pwd in case we are in clean build mode, where - # we have cd'd to a temp directory. - common="$orig_pwd$path_sep$in_dir$path_sep" - # - # If we have any includes, put those at the end. - # Keep a final path_sep to get the default (system) TeX directories included. - txincludes=`list_infix includes $path_sep` - test -n "$txincludes" && common="$common$txincludes$path_sep" - # - for var in $tex_envvars; do - eval val="\$common\$${var}_orig" - # Convert relative paths to absolute paths, so we can run in another - # directory (e.g., in clean build mode, or during the macro-support - # detection). ".:" is added here. - val=`absolute_filenames "$val"` - eval $var="\"$val\"" - export $var - eval verbose \"$var=\'\$${var}\'\" - done - - # --expand - run_makeinfo - - # --command, --texinfo - insert_commands - - # Run until a fix point is reached. - run_tex_suite -} - - -# remove FILES -# ------------ -remove () -{ - verbose "Removing" "$@" - rm -rf "$@" -} - - -# mostly_clean -# ------------ -# Remove auxiliary files and directories. Changes the current directory. -mostly_clean () -{ - cd_orig - set X "$t2ddir" - shift - $tidy || { - local log="$work_build/$in_noext.log" - set X ${1+"$@"} "$log" `generated_files_get "$work_build/$in_noext"` - shift - } - remove ${1+"$@"} -} - - -# cleanup () -# ---------- -# Remove what should be removed according to options. -# Called at the end of each compilation cycle, and at the end of -# the script. Changes the current directory. -cleanup () -{ - case $build_mode in - local) cd_orig; remove "$t2ddir";; - clean) mostly_clean;; - tidy) ;; - esac -} - - - -## ---------------------- ## -## Command line parsing. ## -## ---------------------- ## - -# Push a token among the arguments that will be used to notice when we -# ended options/arguments parsing. -# Use "set dummy ...; shift" rather than 'set - ..." because on -# Solaris set - turns off set -x (but keeps set -e). -# Use ${1+"$@"} rather than "$@" because Digital Unix and Ultrix 4.3 -# still expand "$@" to a single argument (the empty string) rather -# than nothing at all. -arg_sep="$$--$$" -set dummy ${1+"$@"} "$arg_sep"; shift - -# -# Parse command line arguments. -while test x"$1" != x"$arg_sep"; do - - # Handle --option=value by splitting apart and putting back on argv. - case "$1" in - --*=*) - opt=`echo "$1" | $SED -e 's/=.*//'` - val=`echo "$1" | $SED -e 's/[^=]*=//'` - shift - set dummy "$opt" "$val" ${1+"$@"}; shift - ;; - esac - - case "$1" in - -@ ) escape=@;; - -~ ) catcode_special=false;; - # Silently and without documentation accept -b and --b[atch] as synonyms. - -b | --batch) batch=true;; - --build) shift; build_mode=$1;; - --build-dir) shift; build_dir=$1; build_mode=tidy;; - -c | --clean) build_mode=clean;; - -D | --debug) debug=true;; - -e | -E | --expand) expand=true;; - -h | --help) usage;; - -I) shift; list_concat_dirs includes "$1";; - -l | --lang | --language) shift; set_language=$1;; - --mostly-clean) action=mostly-clean;; - --no-line-error) line_error=false;; - --max-iterations) shift; max_iters=$1;; - -o | --out | --output) - shift - # Make it absolute, just in case we also have --clean, or whatever. - oname=`absolute "$1"`;; - - # Output formats. - -O|--output-format) shift; out_lang_set "$1";; - --dvi|--dvipdf|--html|--info|--pdf|--ps|--text) - out_lang_set `echo "x$1" | $SED 's/^x--//'`;; - - -p) out_lang_set pdf;; - -q | -s | --quiet | --silent) quiet=true; batch=true;; - --src-specials) src_specials=--src-specials;; - --shell-escape) shell_escape=--shell-escape;; - --tex4ht) latex2html=tex4ht;; - -t | --texinfo | --command ) shift; textra="$textra\\ -"`echo "$1" | $SED 's/\\\\/\\\\\\\\/g'`;; - --translate-file ) shift; translate_file="$1";; - --tidy) build_mode=tidy;; - -v | --vers*) version;; - -V | --verb*) verb=true;; - --) # What remains are not options. - shift - while test x"$1" != x"$arg_sep"; do - set dummy ${1+"$@"} "$1"; shift - shift - done - break;; - -*) - error 1 "Unknown or ambiguous option \`$1'." \ - "Try \`--help' for more information." - ;; - *) set dummy ${1+"$@"} "$1"; shift;; - esac - shift -done -# Pop the token -shift - -# $tidy: compile in a t2d directory. -# $clean: remove all the aux files. -case $build_mode in - local) clean=false; tidy=false;; - tidy) clean=false; tidy=true;; - clean) clean=true; tidy=true;; - *) error 1 "invalid build mode: $build_mode";; -esac - -# Interpret remaining command line args as filenames. -case $# in - 0) - error 2 "Missing file arguments." "Try \`--help' for more information." - ;; - 1) ;; - *) - if test -n "$oname"; then - error 2 "Can't use option \`--output' with more than one argument." - fi - ;; -esac - - -# We can't do much without tex. -# -if findprog ${TEX:-tex}; then :; else cat </dev/null -else - exec 5>&1 -fi - - -# Enable tracing, and auxiliary tools output. -# -# This fd should be used where you'd typically use /dev/null to throw -# output away. But sometimes it is convenient to see that output (e.g., -# from a grep) to aid debugging. Especially debugging at distance, via -# the user. -# -if $debug; then - exec 6>&1 - set -vx -else - exec 6>/dev/null -fi - -# - -# input_file_name_decode -# ---------------------- -# Decode COMMAND_LINE_FILENAME, and compute: -# - COMMAND_LINE_FILENAME clean of TeX commands -# - IN_DIR -# The directory to the input file, possibly absolute if needed. -# - IN_DIR_ABS -# The absolute directory of the input file. -# - IN_BASE -# The input file base name (no directory part). -# - IN_NOEXT -# The input file name without extensions (nor directory part). -# - IN_INPUT -# Defaults to COMMAND_LINE_FILENAME, but might change if the -# input is preprocessed. With directory, possibly absolute. -input_file_name_decode () -{ - # See if we are run from within AUC-Tex, in which case we are - # passed `\input{FOO.tex}' or even `\nonstopmode\input{FOO.tex}'. - case $command_line_filename in - *\\nonstopmode*) - batch=true;; - esac - case $command_line_filename in - *\\input{*}*) - # Let AUC-TeX error parser deal with line numbers. - line_error=false - command_line_filename=`\ - expr X"$command_line_filename" : X'.*input{\([^}]*\)}'` - ;; - esac - - # If the COMMAND_LINE_FILENAME is not absolute (e.g., --debug.tex), - # prepend `./' in order to avoid that the tools take it as an option. - echo "$command_line_filename" | LC_ALL=C $EGREP '^(/|[A-Za-z]:/)' >&6 \ - || command_line_filename="./$command_line_filename" - - # See if the file exists. If it doesn't we're in trouble since, even - # though the user may be able to reenter a valid filename at the tex - # prompt (assuming they're attending the terminal), this script won't - # be able to find the right xref files and so forth. - test -r "$command_line_filename" \ - || error 1 "cannot read $command_line_filename, skipping." - - # Get the name of the current directory. - in_dir=`func_dirname "$command_line_filename"` - in_dir_abs=`absolute "$in_dir"` - # In a clean build, we `cd', so get an absolute file name. - if $tidy; then - in_dir=$in_dir_abs - fi - - # Strip directory part but leave extension. - in_base=`basename "$command_line_filename"` - # Strip extension. - in_noext=`noext "$in_base"` - - # The normalized file name to compile. Must always point to the - # file to actually compile (in case of recoding, macro-expansion etc.). - in_input=$in_dir/$in_base - - - # Compute the output file name. - if test x"$oname" != x; then - out_name=$oname - else - out_name=$in_noext.`out_lang_ext` - fi - out_dir=`func_dirname "$out_name"` - out_dir_abs=`absolute "$out_dir"` - out_base=`basename "$out_name"` - out_noext=`noext "$out_base"` -} - - -## -------------- ## -## TeXify files. ## -## -------------- ## - -for command_line_filename -do - verbose "Processing $command_line_filename ..." - - input_file_name_decode - - # `texinfo' or `latex'? - in_lang=`compute_language "$command_line_filename"` - - # An auxiliary directory used for all the auxiliary tasks involved - # in compiling this document. - case $build_dir in - '' | . ) t2ddir=$out_noext.t2d ;; - *) # Avoid collisions between multiple occurrences of the same - # file, so depend on the output path. Remove leading `./', - # at least to avoid creating a file starting with `.!', i.e., - # an invisible file. The sed expression is fragile if the cwd - # has active characters. Transform / into ! so that we don't - # need `mkdir -p'. It might be something to reconsider. - t2ddir=$build_dir/`echo "$out_dir_abs/$out_noext.t2d" | - $SED "s,^$orig_pwd/,,;s,^\./,,;s,/,!,g"` - esac - # Remove it at exit if clean mode. - trap "cleanup" 0 1 2 15 - - ensure_dir "$build_dir" "$t2ddir" - - # We will change directory, better work with an absolute path... - t2ddir=`absolute "$t2ddir"` - # Sometimes there are incompatibilities between auxiliary files for - # DVI and PDF. The contents can also change whether we work on PDF - # and/or DVI. So keep separate spaces for each. - workdir=$t2ddir/`out_lang_tex` - ensure_dir "$workdir" - - # _build. In a tidy build, where the auxiliary files are output. - if $tidy; then - work_build=$workdir/build - else - work_build=. - fi - - # _bak. Copies of the previous auxiliary files (another round is - # run if they differ from the new ones). - work_bak=$workdir/bak - - # Make those directories. - ensure_dir "$work_build" "$work_bak" - - case $action in - compile) - # Compile the document. - compile - cleanup - ;; - - mostly-clean) - mostly_clean - ;; - esac -done - -verbose "done." -exit 0 # exit successfully, not however we ended the loop. diff --git a/readline/doc/texi2html b/readline/doc/texi2html deleted file mode 100755 index 13b55884c3..0000000000 --- a/readline/doc/texi2html +++ /dev/null @@ -1,5428 +0,0 @@ -#! /usr/bin/perl -'di '; -'ig 00 '; -#+############################################################################## -# -# texi2html: Program to transform Texinfo documents to HTML -# -# Copyright (C) 1999, 2000 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# -#-############################################################################## - -# This requires perl version 5 or higher -require 5.0; - -#++############################################################################## -# -# NOTE FOR DEBUGGING THIS SCRIPT: -# You can run 'perl texi2html.pl' directly, provided you have -# the environment variable T2H_HOME set to the directory containing -# the texi2html.init file -# -#--############################################################################## - -# CVS version: -# $Id: texi2html.pl,v 1.55 2000/07/27 14:39:41 obachman Exp $ - -# Homepage: -$T2H_HOMEPAGE = < (original author) - Karl Berry - Olaf Bachmann - and many others. -Maintained by: Olaf Bachmann -Send bugs and suggestions to -EOT - -# Version: set in configure.in -$THISVERSION = '1.64'; -$THISPROG = "texi2html $THISVERSION"; # program name and version - -# The man page for this program is included at the end of this file and can be -# viewed using the command 'nroff -man texi2html'. - -# Identity: - -$T2H_TODAY = &pretty_date; # like "20 September 1993" -# the eval prevents this from breaking on system which do not have -# a proper getpwuid implemented -eval { ($T2H_USER = (getpwuid ($<))[6]) =~ s/,.*//;}; # Who am i - -#+++############################################################################ -# # -# Initialization # -# Pasted content of File $(srcdir)/texi2html.init: Default initializations # -# # -#---############################################################################ - -# leave this within comments, and keep the require statement -# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init -# exists. - -# -# -*-perl-*- -###################################################################### -# File: texi2html.init -# -# Sets default values for command-line arguments and for various customizable -# procedures -# -# A copy of this file is pasted into the beginning of texi2html by -# 'make texi2html' -# -# Copy this file and make changes to it, if you like. -# Afterwards, either, load it with command-line option -init_file -# -# $Id: texi2html.init,v 1.34 2000/07/27 14:09:02 obachman Exp $ - -###################################################################### -# stuff which can also be set by command-line options -# -# -# Note: values set here, overwrite values set by the command-line -# options before -init_file and might still be overwritten by -# command-line arguments following the -init_file option -# - -# T2H_OPTIONS is a hash whose keys are the (long) names of valid -# command-line options and whose values are a hash with the following keys: -# type ==> one of !|=i|:i|=s|:s (see GetOpt::Long for more info) -# linkage ==> ref to scalar, array, or subroutine (see GetOpt::Long for more info) -# verbose ==> short description of option (displayed by -h) -# noHelp ==> if 1 -> for "not so important options": only print description on -h 1 -# 2 -> for obsolete options: only print description on -h 2 - -$T2H_DEBUG = 0; -$T2H_OPTIONS -> {debug} = -{ - type => '=i', - linkage => \$main::T2H_DEBUG, - verbose => 'output HTML with debuging information', -}; - -$T2H_DOCTYPE = ''; -$T2H_OPTIONS -> {doctype} = -{ - type => '=s', - linkage => \$main::T2H_DOCTYPE, - verbose => 'document type which is output in header of HTML files', - noHelp => 1 -}; - -$T2H_CHECK = 0; -$T2H_OPTIONS -> {check} = -{ - type => '!', - linkage => \$main::T2H_CHECK, - verbose => 'if set, only check files and output all things that may be Texinfo commands', - noHelp => 1 -}; - -# -expand -# if set to "tex" (or, "info") expand @iftex and @tex (or, @ifinfo) sections -# else, neither expand @iftex, @tex, nor @ifinfo sections -$T2H_EXPAND = "info"; -$T2H_OPTIONS -> {expand} = -{ - type => '=s', - linkage => \$T2H_EXPAND, - verbose => 'Expand info|tex|none section of texinfo source', -}; - -# - glossary -#if set, uses section named `Footnotes' for glossary -$T2H_USE_GLOSSARY = 0; -T2H_OPTIONS -> {glossary} = -{ - type => '!', - linkage => \$T2H_USE_GLOSSARY, - verbose => "if set, uses section named `Footnotes' for glossary", - noHelp => 1, -}; - - -# -invisible -# $T2H_INVISIBLE_MARK is the text used to create invisible destination -# anchors for index links (you can for instance use the invisible.xbm -# file shipped with this program). This is a workaround for a known -# bug of many WWW browsers, including netscape. -# For me, it works fine without it -- on the contrary: if there, it -# inserts space between headers and start of text (obachman 3/99) -$T2H_INVISIBLE_MARK = ''; -# $T2H_INVISIBLE_MARK = ' '; -$T2H_OPTIONS -> {invisible} = -{ - type => '=s', - linkage => \$T2H_INVISIBLE_MARK, - verbose => 'use text in invisble anchot', - noHelp => 1, -}; - -# -iso -# if set, ISO8879 characters are used for special symbols (like copyright, etc) -$T2H_USE_ISO = 0; -$T2H_OPTIONS -> {iso} = -{ - type => 'iso', - linkage => \$T2H_USE_ISO, - verbose => 'if set, ISO8879 characters are used for special symbols (like copyright, etc)', - noHelp => 1, -}; - -# -I -# list directories where @include files are searched for (besides the -# directory of the doc file) additional '-I' args add to this list -@T2H_INCLUDE_DIRS = ("."); -$T2H_OPTIONS -> {I} = -{ - type => '=s', - linkage => \@T2H_INCLUDE_DIRS, - verbose => 'append $s to the @include search path', -}; - -# -top_file -# uses file of this name for top-level file -# extension is manipulated appropriately, if necessary. -# If empty, .html is used -# Typically, you would set this to "index.html". -$T2H_TOP_FILE = ''; -$T2H_OPTIONS -> {top_file} = -{ - type => '=s', - linkage => \$T2H_TOP_FILE, - verbose => 'use $s as top file, instead of .html', -}; - - -# -toc_file -# uses file of this name for table of contents file -# extension is manipulated appropriately, if necessary. -# If empty, _toc.html is used -$T2H_TOC_FILE = ''; -$T2H_OPTIONS -> {toc_file} = -{ - type => '=s', - linkage => \$T2H_TOC_FILE, - verbose => 'use $s as ToC file, instead of _toc.html', -}; - -# -frames -# if set, output two additional files which use HTML 4.0 "frames". -$T2H_FRAMES = 0; -$T2H_OPTIONS -> {frames} = -{ - type => '!', - linkage => \$T2H_FRAMES, - verbose => 'output files which use HTML 4.0 frames (experimental)', - noHelp => 1, -}; - - -# -menu | -nomenu -# if set, show the Texinfo menus -$T2H_SHOW_MENU = 1; -$T2H_OPTIONS -> {menu} = -{ - type => '!', - linkage => \$T2H_SHOW_MENU, - verbose => 'ouput Texinfo menus', -}; - -# -number | -nonumber -# if set, number sections and show section names and numbers in references -# and menus -$T2H_NUMBER_SECTIONS = 1; -$T2H_OPTIONS -> {number} = -{ - type => '!', - linkage => \$T2H_NUMBER_SECTIONS, - verbose => 'use numbered sections' -}; - -# if set, and T2H_NUMBER_SECTIONS is set, then use node names in menu -# entries, instead of section names -$T2H_NODE_NAME_IN_MENU = 0; - -# if set and menu entry equals menu descr, then do not print menu descr. -# Likewise, if node name equals entry name, do not print entry name. -$T2H_AVOID_MENU_REDUNDANCY = 1; - -# -split section|chapter|none -# if set to 'section' (resp. 'chapter') create one html file per (sub)section -# (resp. chapter) and separate pages for Top, ToC, Overview, Index, -# Glossary, About. -# otherwise, create monolithic html file which contains whole document -#$T2H_SPLIT = 'section'; -$T2H_SPLIT = ''; -$T2H_OPTIONS -> {split} = -{ - type => '=s', - linkage => \$T2H_SPLIT, - verbose => 'split document on section|chapter else no splitting', -}; - -# -section_navigation|-no-section_navigation -# if set, then navigation panels are printed at the beginning of each section -# and, possibly at the end (depending on whether or not there were more than -# $T2H_WORDS_IN_PAGE words on page -# This is most useful if you do not want to have section navigation -# on -split chapter -$T2H_SECTION_NAVIGATION = 1; -$T2H_OPTIONS -> {sec_nav} = -{ - type => '!', - linkage => \$T2H_SECTION_NAVIGATION, - verbose => 'output navigation panels for each section', -}; - -# -subdir -# if set put result files in this directory -# if not set result files are put into current directory -#$T2H_SUBDIR = 'html'; -$T2H_SUBDIR = ''; -$T2H_OPTIONS -> {subdir} = -{ - type => '=s', - linkage => \$T2H_SUBDIR, - verbose => 'put HTML files in directory $s, instead of $cwd', -}; - -# -short_extn -# If this is set all HTML file will have extension ".htm" instead of -# ".html". This is helpful when shipping the document to PC systems. -$T2H_SHORTEXTN = 0; -$T2H_OPTIONS -> {short_ext} = -{ - type => '!', - linkage => \$T2H_SHORTEXTN, - verbose => 'use "htm" extension for output HTML files', -}; - - -# -prefix -# Set the output file prefix, prepended to all .html, .gif and .pl files. -# By default, this is the basename of the document -$T2H_PREFIX = ''; -$T2H_OPTIONS -> {prefix} = -{ - type => '=s', - linkage => \$T2H_PREFIX, - verbose => 'use as prefix for output files, instead of ', -}; - -# -o filename -# If set, generate monolithic document output html into $filename -$T2H_OUT = ''; -$T2H_OPTIONS -> {out_file} = -{ - type => '=s', - linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';}, - verbose => 'if set, all HTML output goes into file $s', -}; - -# -short_ref -#if set cross-references are given without section numbers -$T2H_SHORT_REF = ''; -$T2H_OPTIONS -> {short_ref} = -{ - type => '!', - linkage => \$T2H_SHORT_REF, - verbose => 'if set, references are without section numbers', -}; - -# -idx_sum -# if value is set, then for each @prinindex $what -# $docu_name_$what.idx is created which contains lines of the form -# $key\t$ref sorted alphabetically (case matters) -$T2H_IDX_SUMMARY = 0; -$T2H_OPTIONS -> {idx_sum} = -{ - type => '!', - linkage => \$T2H_IDX_SUMMARY, - verbose => 'if set, also output index summary', - noHelp => 1, -}; - -# -verbose -# if set, chatter about what we are doing -$T2H_VERBOSE = ''; -$T2H_OPTIONS -> {Verbose} = -{ - type => '!', - linkage => \$T2H_VERBOSE, - verbose => 'print progress info to stdout', -}; - -# -lang -# For page titles use $T2H_WORDS->{$T2H_LANG}->{...} as title. -# To add a new language, supply list of titles (see $T2H_WORDS below). -# and use ISO 639 language codes (see e.g. perl module Locale-Codes-1.02 -# for definitions) -# Default's to 'en' if not set or no @documentlanguage is specified -$T2H_LANG = ''; -$T2H_OPTIONS -> {lang} = -{ - type => '=s', - linkage => sub {SetDocumentLanguage($_[1])}, - verbose => 'use $s as document language (ISO 639 encoding)', -}; - -# -l2h -# if set, uses latex2html for generation of math content -$T2H_L2H = ''; -$T2H_OPTIONS -> {l2h} = -{ - type => '!', - linkage => \$T2H_L2H, - verbose => 'if set, uses latex2html for @math and @tex', -}; - -###################### -# The following options are only relevant if $T2H_L2H is set -# -# -l2h_l2h -# name/location of latex2html progam -$T2H_L2H_L2H = "latex2html"; -$T2H_OPTIONS -> {l2h_l2h} = -{ - type => '=s', - linkage => \$T2H_L2H_L2H, - verbose => 'program to use for latex2html translation', - noHelp => 1, -}; - -# -l2h_skip -# if set, skips actual call to latex2html tries to reuse previously generated -# content, instead -$T2H_L2H_SKIP = ''; -$T2H_OPTIONS -> {l2h_skip} = -{ - type => '!', - linkage => \$T2H_L2H_SKIP, - verbose => 'if set, tries to reuse previously latex2html output', - noHelp => 1, -}; - -# -l2h_tmp -# if set, l2h uses this directory for temporarary files. The path -# leading to this directory may not contain a dot (i.e., a "."), -# otherwise, l2h will fail -$T2H_L2H_TMP = ''; -$T2H_OPTIONS -> {l2h_tmp} = -{ - type => '=s', - linkage => \$T2H_L2H_TMP, - verbose => 'if set, uses $s as temporary latex2html directory', - noHelp => 1, -}; - -# if set, cleans intermediate files (they all have the prefix $doc_l2h_) -# of l2h -$T2H_L2H_CLEAN = 1; -$T2H_OPTIONS -> {l2h_clean} = -{ - type => '!', - linkage => \$T2H_L2H_CLEAN, - verbose => 'if set, do not keep intermediate latex2html files for later reuse', - noHelp => 1, -}; - -$T2H_OPTIONS -> {D} = -{ - type => '=s', - linkage => sub {$main::value{@_[1]} = 1;}, - verbose => 'equivalent to Texinfo "@set $s 1"', - noHelp => 1, -}; - -$T2H_OPTIONS -> {init_file} = -{ - type => '=s', - linkage => \&LoadInitFile, - verbose => 'load init file $s' -}; - - -############################################################################## -# -# The following can only be set in the init file -# -############################################################################## - -# if set, center @image by default -# otherwise, do not center by default -$T2H_CENTER_IMAGE = 1; - -# used as identation for block enclosing command @example, etc -# If not empty, must be enclosed in -$T2H_EXAMPLE_INDENT_CELL = ' '; -# same as above, only for @small -$T2H_SMALL_EXAMPLE_INDENT_CELL = ' '; -# font size for @small -$T2H_SMALL_FONT_SIZE = '-1'; - -# if non-empty, and no @..heading appeared in Top node, then -# use this as header for top node/section, otherwise use value of -# @settitle or @shorttitle (in that order) -$T2H_TOP_HEADING = ''; - -# if set, use this chapter for 'Index' button, else -# use first chapter whose name matches 'index' (case insensitive) -$T2H_INDEX_CHAPTER = ''; - -# if set and $T2H_SPLIT is set, then split index pages at the next letter -# after they have more than that many entries -$T2H_SPLIT_INDEX = 100; - -# if set (e.g., to index.html) replace hrefs to this file -# (i.e., to index.html) by ./ -$T2H_HREF_DIR_INSTEAD_FILE = ''; - -######################################################################## -# Language dependencies: -# To add a new language extend T2H_WORDS hash and create $T2H_<...>_WORDS hash -# To redefine one word, simply do: -# $T2H_WORDS->{}->{} = 'whatever' in your personal init file. -# -$T2H_WORDS_EN = -{ - # titles of pages - 'ToC_Title' => 'Table of Contents', - 'Overview_Title' => 'Short Table of Contents', - 'Index_Title' => 'Index', - 'About_Title' => 'About this document', - 'Footnotes_Title' => 'Footnotes', - 'See' => 'See', - 'see' => 'see', - 'section' => 'section', -# If necessary, we could extend this as follows: -# # text for buttons -# 'Top_Button' => 'Top', -# 'ToC_Button' => 'Contents', -# 'Overview_Button' => 'Overview', -# 'Index_button' => 'Index', -# 'Back_Button' => 'Back', -# 'FastBack_Button' => 'FastBack', -# 'Prev_Button' => 'Prev', -# 'Up_Button' => 'Up', -# 'Next_Button' => 'Next', -# 'Forward_Button' =>'Forward', -# 'FastWorward_Button' => 'FastForward', -# 'First_Button' => 'First', -# 'Last_Button' => 'Last', -# 'About_Button' => 'About' -}; - -$T2H_WORD_DE = -{ - 'ToC_Title' => 'Inhaltsverzeichniss', - 'Overview_Title' => 'Kurzes Inhaltsverzeichniss', - 'Index_Title' => 'Index', - 'About_Title' => 'Über dieses Dokument', - 'Footnotes_Title' => 'Fußnoten', - 'See' => 'Siehe', - 'see' => 'siehe', - 'section' => 'Abschnitt', -}; - -$T2H_WORD_NL = -{ - 'ToC_Title' => 'Inhoudsopgave', - 'Overview_Title' => 'Korte inhoudsopgave', - 'Index_Title' => 'Index', #Not sure ;-) - 'About_Title' => 'No translation available!', #No translation available! - 'Footnotes_Title' => 'No translation available!', #No translation available! - 'See' => 'Zie', - 'see' => 'zie', - 'section' => 'sectie', -}; - -$T2H_WORD_ES = -{ - 'ToC_Title' => 'índice General', - 'Overview_Title' => 'Resumen del Contenido', - 'Index_Title' => 'Index', #Not sure ;-) - 'About_Title' => 'No translation available!', #No translation available! - 'Footnotes_Title' => 'Fußnoten', - 'See' => 'Véase', - 'see' => 'véase', - 'section' => 'sección', -}; - -$T2H_WORD_NO = -{ - 'ToC_Title' => 'Innholdsfortegnelse', - 'Overview_Title' => 'Kort innholdsfortegnelse', - 'Index_Title' => 'Indeks', #Not sure ;-) - 'About_Title' => 'No translation available!', #No translation available! - 'Footnotes_Title' => 'No translation available!', - 'See' => 'Se', - 'see' => 'se', - 'section' => 'avsnitt', -}; - -$T2H_WORD_PT = -{ - 'ToC_Title' => 'Sumário', - 'Overview_Title' => 'Breve Sumário', - 'Index_Title' => 'Índice', #Not sure ;-) - 'About_Title' => 'No translation available!', #No translation available! - 'Footnotes_Title' => 'No translation available!', - 'See' => 'Veja', - 'see' => 'veja', - 'section' => 'Seção', -}; - -$T2H_WORDS = -{ - 'en' => $T2H_WORDS_EN, - 'de' => $T2H_WORDS_DE, - 'nl' => $T2H_WORDS_NL, - 'es' => $T2H_WORDS_ES, - 'no' => $T2H_WORDS_NO, - 'pt' => $T2H_WORDS_PT -}; - -@MONTH_NAMES_EN = -( - 'January', 'February', 'March', 'April', 'May', - 'June', 'July', 'August', 'September', 'October', - 'November', 'December' -); - -@MONTH_NAMES_DE = -( - 'Januar', 'Februar', 'März', 'April', 'Mai', - 'Juni', 'Juli', 'August', 'September', 'Oktober', - 'November', 'Dezember' -); - -@MONTH_NAMES_NL = -( - 'Januari', 'Februari', 'Maart', 'April', 'Mei', - 'Juni', 'Juli', 'Augustus', 'September', 'Oktober', - 'November', 'December' -); - -@MONTH_NAMES_ES = -( - 'enero', 'febrero', 'marzo', 'abril', 'mayo', - 'junio', 'julio', 'agosto', 'septiembre', 'octubre', - 'noviembre', 'diciembre' -); - -@MONTH_NAMES_NO = -( - - 'januar', 'februar', 'mars', 'april', 'mai', - 'juni', 'juli', 'august', 'september', 'oktober', - 'november', 'desember' -); - -@MONTH_NAMES_PT = -( - 'Janeiro', 'Fevereiro', 'Março', 'Abril', 'Maio', - 'Junho', 'Julho', 'Agosto', 'Setembro', 'Outubro', - 'Novembro', 'Dezembro' -); - - -$MONTH_NAMES = -{ - 'en' => \@MONTH_NAMES_EN, - 'de' => \@MONTH_NAMES_DE, - 'es' => \@MONTH_NAMES_ES, - 'nl' => \@MONTH_NAMES_NL, - 'no' => \@MONTH_NAMES_NO, - 'pt' => \@MONTH_NAMES_PT -}; -######################################################################## -# Control of Page layout: -# You can make changes of the Page layout at two levels: -# 1.) For small changes, it is often enough to change the value of -# some global string/hash/array variables -# 2.) For larger changes, reimplement one of the T2H_DEFAULT_* routines, -# give them another name, and assign them to the respective -# $T2H_ variable. - -# As a general interface, the hashes T2H_HREF, T2H_NAME, T2H_NODE hold -# href, html-name, node-name of -# This -- current section (resp. html page) -# Top -- top page ($T2H_TOP_FILE) -# Contents -- Table of contents -# Overview -- Short table of contents -# Index -- Index page -# About -- page which explain "navigation buttons" -# First -- first node -# Last -- last node -# -# Whether or not the following hash values are set, depends on the context -# (all values are w.r.t. 'This' section) -# Next -- next node of texinfo -# Prev -- previous node of texinfo -# Up -- up node of texinfo -# Forward -- next node in reading order -# Back -- previous node in reading order -# FastForward -- if leave node, up and next, else next node -# FastBackward-- if leave node, up and prev, else prev node -# -# Furthermore, the following global variabels are set: -# $T2H_THISDOC{title} -- title as set by @setttile -# $T2H_THISDOC{fulltitle} -- full title as set by @title... -# $T2H_THISDOC{subtitle} -- subtitle as set by @subtitle -# $T2H_THISDOC{author} -- author as set by @author -# -# and pointer to arrays of lines which need to be printed by t2h_print_lines -# $T2H_OVERVIEW -- lines of short table of contents -# $T2H_TOC -- lines of table of contents -# $T2H_TOP -- lines of Top texinfo node -# $T2H_THIS_SECTION -- lines of 'This' section - -# -# There are the following subs which control the layout: -# -$T2H_print_section = \&T2H_DEFAULT_print_section; -$T2H_print_Top_header = \&T2H_DEFAULT_print_Top_header; -$T2H_print_Top_footer = \&T2H_DEFAULT_print_Top_footer; -$T2H_print_Top = \&T2H_DEFAULT_print_Top; -$T2H_print_Toc = \&T2H_DEFAULT_print_Toc; -$T2H_print_Overview = \&T2H_DEFAULT_print_Overview; -$T2H_print_Footnotes = \&T2H_DEFAULT_print_Footnotes; -$T2H_print_About = \&T2H_DEFAULT_print_About; -$T2H_print_misc_header = \&T2H_DEFAULT_print_misc_header; -$T2H_print_misc_footer = \&T2H_DEFAULT_print_misc_footer; -$T2H_print_misc = \&T2H_DEFAULT_print_misc; -$T2H_print_chapter_header = \&T2H_DEFAULT_print_chapter_header; -$T2H_print_chapter_footer = \&T2H_DEFAULT_print_chapter_footer; -$T2H_print_page_head = \&T2H_DEFAULT_print_page_head; -$T2H_print_page_foot = \&T2H_DEFAULT_print_page_foot; -$T2H_print_head_navigation = \&T2H_DEFAULT_print_head_navigation; -$T2H_print_foot_navigation = \&T2H_DEFAULT_print_foot_navigation; -$T2H_button_icon_img = \&T2H_DEFAULT_button_icon_img; -$T2H_print_navigation = \&T2H_DEFAULT_print_navigation; -$T2H_about_body = \&T2H_DEFAULT_about_body; -$T2H_print_frame = \&T2H_DEFAULT_print_frame; -$T2H_print_toc_frame = \&T2H_DEFAULT_print_toc_frame; - -######################################################################## -# Layout for html for every sections -# -sub T2H_DEFAULT_print_section -{ - my $fh = shift; - local $T2H_BUTTONS = \@T2H_SECTION_BUTTONS; - &$T2H_print_head_navigation($fh) if $T2H_SECTION_NAVIGATION; - my $nw = t2h_print_lines($fh); - if ($T2H_SPLIT eq 'section' && $T2H_SECTION_NAVIGATION) - { - &$T2H_print_foot_navigation($fh, $nw); - } - else - { - print $fh '
' . "\n"; - } -} - -################################################################### -# Layout of top-page I recommend that you use @ifnothtml, @ifhtml, -# @html within the Top texinfo node to specify content of top-level -# page. -# -# If you enclose everything in @ifnothtml, then title, subtitle, -# author and overview is printed -# T2H_HREF of Next, Prev, Up, Forward, Back are not defined -# if $T2H_SPLIT then Top page is in its own html file -sub T2H_DEFAULT_print_Top_header -{ - &$T2H_print_page_head(@_) if $T2H_SPLIT; - t2h_print_label(@_); # this needs to be called, otherwise no label set - &$T2H_print_head_navigation(@_); -} -sub T2H_DEFAULT_print_Top_footer -{ - &$T2H_print_foot_navigation(@_); - &$T2H_print_page_foot(@_) if $T2H_SPLIT; -} -sub T2H_DEFAULT_print_Top -{ - my $fh = shift; - - # for redefining navigation buttons use: - # local $T2H_BUTTONS = [...]; - # as it is, 'Top', 'Contents', 'Index', 'About' are printed - local $T2H_BUTTONS = \@T2H_MISC_BUTTONS; - &$T2H_print_Top_header($fh); - if ($T2H_THIS_SECTION) - { - # if top-level node has content, then print it with extra header - print $fh "

$T2H_NAME{Top}

" - unless ($T2H_HAS_TOP_HEADING); - t2h_print_lines($fh, $T2H_THIS_SECTION) - } - else - { - # top-level node is fully enclosed in @ifnothtml - # print fulltitle, subtitle, author, Overview - print $fh - "
\n

" . - join("

\n

", split(/\n/, $T2H_THISDOC{fulltitle})) . - "

\n"; - print $fh "

$T2H_THISDOC{subtitle}

\n" if $T2H_THISDOC{subtitle}; - print $fh "$T2H_THISDOC{author}\n" if $T2H_THISDOC{author}; - print $fh < -
-

-

Overview:

-
-EOT - t2h_print_lines($fh, $T2H_OVERVIEW); - print $fh "
\n"; - } - &$T2H_print_Top_footer($fh); -} - -################################################################### -# Layout of Toc, Overview, and Footnotes pages -# By default, we use "normal" layout -# T2H_HREF of Next, Prev, Up, Forward, Back, etc are not defined -# use: local $T2H_BUTTONS = [...] to redefine navigation buttons -sub T2H_DEFAULT_print_Toc -{ - return &$T2H_print_misc(@_); -} -sub T2H_DEFAULT_print_Overview -{ - return &$T2H_print_misc(@_); -} -sub T2H_DEFAULT_print_Footnotes -{ - return &$T2H_print_misc(@_); -} -sub T2H_DEFAULT_print_About -{ - return &$T2H_print_misc(@_); -} - -sub T2H_DEFAULT_print_misc_header -{ - &$T2H_print_page_head(@_) if $T2H_SPLIT; - # this needs to be called, otherwise, no labels are set - t2h_print_label(@_); - &$T2H_print_head_navigation(@_); -} -sub T2H_DEFAULT_print_misc_footer -{ - &$T2H_print_foot_navigation(@_); - &$T2H_print_page_foot(@_) if $T2H_SPLIT; -} -sub T2H_DEFAULT_print_misc -{ - my $fh = shift; - local $T2H_BUTTONS = \@T2H_MISC_BUTTONS; - &$T2H_print_misc_header($fh); - print $fh "

$T2H_NAME{This}

\n"; - t2h_print_lines($fh); - &$T2H_print_misc_footer($fh); -} - -################################################################### -# chapter_header and chapter_footer are only called if -# T2H_SPLIT eq 'chapter' -# chapter_header: after print_page_header, before print_section -# chapter_footer: after print_section of last section, before print_page_footer -# -# If you want to get rid of navigation stuff after each section, -# redefine print_section such that it does not call print_navigation, -# and put print_navigation into print_chapter_header -@T2H_CHAPTER_BUTTONS = - ( - 'FastBack', 'FastForward', ' ', - ' ', ' ', ' ', ' ', - 'Top', 'Contents', 'Index', 'About', - ); - -sub T2H_DEFAULT_print_chapter_header -{ - # nothing to do there, by default - if (! $T2H_SECTION_NAVIGATION) - { - my $fh = shift; - local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS; - &$T2H_print_navigation($fh); - print $fh "\n
\n"; - } -} - -sub T2H_DEFAULT_print_chapter_footer -{ - local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS; - &$T2H_print_navigation(@_); -} -################################################################### -$T2H_TODAY = &pretty_date; # like "20 September 1993" - -sub pretty_date { - local($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst); - - ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time); - $year += ($year < 70) ? 2000 : 1900; - # obachman: Let's do it as the Americans do - return($MONTH_NAMES->{$T2H_LANG}[$mon] . ", " . $mday . " " . $year); -} - - -################################################################### -# Layout of standard header and footer -# - -# Set the default body text, inserted between -###$T2H_BODYTEXT = 'LANG="EN" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"'; -$T2H_BODYTEXT = 'LANG="' . $T2H_LANG . '" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"'; -# text inserted after -$T2H_AFTER_BODY_OPEN = ''; -#text inserted before -$T2H_PRE_BODY_CLOSE = ''; -# this is used in footer -$T2H_ADDRESS = "by $T2H_USER " if $T2H_USER; -$T2H_ADDRESS .= "on $T2H_TODAY"; -# this is added inside after and some META NAME stuff -# can be used for <style> <script>, <meta> tags -$T2H_EXTRA_HEAD = ''; - -sub T2H_DEFAULT_print_page_head -{ - my $fh = shift; - my $longtitle = "$T2H_THISDOC{title}: $T2H_NAME{This}"; - print $fh <<EOT; -<HTML> -$T2H_DOCTYPE -<!-- Created on $T2H_TODAY by $THISPROG --> -<!-- -$T2H_AUTHORS ---> -<HEAD> -<TITLE>$longtitle - - - - - - -$T2H_EXTRA_HEAD - - - -$T2H_AFTER_BODY_OPEN -EOT -} - -sub T2H_DEFAULT_print_page_foot -{ - my $fh = shift; - print $fh < - -This document was generated -$T2H_ADDRESS -using texi2html -$T2H_PRE_BODY_CLOSE - - -EOT -} - -################################################################### -# Layout of navigation panel - -# if this is set, then a vertical navigation panel is used -$T2H_VERTICAL_HEAD_NAVIGATION = 0; -sub T2H_DEFAULT_print_head_navigation -{ - my $fh = shift; - if ($T2H_VERTICAL_HEAD_NAVIGATION) - { - print $fh < - - -EOT - } - &$T2H_print_navigation($fh, $T2H_VERTICAL_HEAD_NAVIGATION); - if ($T2H_VERTICAL_HEAD_NAVIGATION) - { - print $fh < - -EOT - } - elsif ($T2H_SPLIT eq 'section') - { - print $fh "
\n"; - } -} - -# Specifies the minimum page length required before a navigation panel -# is placed at the bottom of a page (the default is that of latex2html) -# T2H_THIS_WORDS_IN_PAGE holds number of words of current page -$T2H_WORDS_IN_PAGE = 300; -sub T2H_DEFAULT_print_foot_navigation -{ - my $fh = shift; - my $nwords = shift; - if ($T2H_VERTICAL_HEAD_NAVIGATION) - { - print $fh < - - -EOT - } - print $fh "
\n"; - &$T2H_print_navigation($fh) if ($nwords >= $T2H_WORDS_IN_PAGE) -} - -###################################################################### -# navigation panel -# -# specify in this array which "buttons" should appear in which order -# in the navigation panel for sections; use ' ' for empty buttons (space) -@T2H_SECTION_BUTTONS = - ( - 'Back', 'Forward', ' ', 'FastBack', 'Up', 'FastForward', - ' ', ' ', ' ', ' ', - 'Top', 'Contents', 'Index', 'About', - ); - -# buttons for misc stuff -@T2H_MISC_BUTTONS = ('Top', 'Contents', 'Index', 'About'); - -# insert here name of icon images for buttons -# Icons are used, if $T2H_ICONS and resp. value are set -%T2H_ACTIVE_ICONS = - ( - 'Top', '', - 'Contents', '', - 'Overview', '', - 'Index', '', - 'Back', '', - 'FastBack', '', - 'Prev', '', - 'Up', '', - 'Next', '', - 'Forward', '', - 'FastForward', '', - 'About' , '', - 'First', '', - 'Last', '', - ' ', '' - ); - -# insert here name of icon images for these, if button is inactive -%T2H_PASSIVE_ICONS = - ( - 'Top', '', - 'Contents', '', - 'Overview', '', - 'Index', '', - 'Back', '', - 'FastBack', '', - 'Prev', '', - 'Up', '', - 'Next', '', - 'Forward', '', - 'FastForward', '', - 'About', '', - 'First', '', - 'Last', '', - ); - -# how to create IMG tag -sub T2H_DEFAULT_button_icon_img -{ - my $button = shift; - my $icon = shift; - my $name = shift; - return qq{$button: $name}; -} - -# Names of text as alternative for icons -%T2H_NAVIGATION_TEXT = - ( - 'Top', 'Top', - 'Contents', 'Contents', - 'Overview', 'Overview', - 'Index', 'Index', - ' ', '   ', - 'Back', ' < ', - 'FastBack', ' << ', - 'Prev', 'Prev', - 'Up', ' Up ', - 'Next', 'Next', - 'Forward', ' > ', - 'FastForward', ' >> ', - 'About', ' ? ', - 'First', ' |< ', - 'Last', ' >| ' - ); - -sub T2H_DEFAULT_print_navigation -{ - my $fh = shift; - my $vertical = shift; - my $spacing = 1; - print $fh "\n"; - - print $fh "" unless $vertical; - for $button (@$T2H_BUTTONS) - { - print $fh qq{\n} if $vertical; - print $fh qq{\n"; - print $fh "\n" if $vertical; - } - print $fh "" unless $vertical; - print $fh "
}; - - if (ref($button) eq 'CODE') - { - &$button($fh, $vertical); - } - elsif ($button eq ' ') - { # handle space button - print $fh - $T2H_ICONS && $T2H_ACTIVE_ICONS{' '} ? - &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{' '}) : - $T2H_NAVIGATION_TEXT{' '}; - next; - } - elsif ($T2H_HREF{$button}) - { # button is active - print $fh - $T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ? # use icon ? - t2h_anchor('', $T2H_HREF{$button}, # yes - &$T2H_button_icon_img($button, - $T2H_ACTIVE_ICONS{$button}, - $T2H_NAME{$button})) - : # use text - "[" . - t2h_anchor('', $T2H_HREF{$button}, $T2H_NAVIGATION_TEXT{$button}) . - "]"; - } - else - { # button is passive - print $fh - $T2H_ICONS && $T2H_PASSIVE_ICONS{$button} ? - &$T2H_button_icon_img($button, - $T2H_PASSIVE_ICONS{$button}, - $T2H_NAME{$button}) : - - "[" . $T2H_NAVIGATION_TEXT{$button} . "]"; - } - print $fh "
\n"; -} - -###################################################################### -# Frames: this is from "Richard Y. Kim" -# Should be improved to be more conforming to other _print* functions - -sub T2H_DEFAULT_print_frame -{ - my $fh = shift; - print $fh < -$T2H_THISDOC{title} - - - - - -EOT -} - -sub T2H_DEFAULT_print_toc_frame -{ - my $fh = shift; - &$T2H_print_page_head($fh); - print $fh <Content -EOT - print $fh map {s/HREF=/target=\"main\" HREF=/; $_;} @stoc_lines; - print $fh "\n"; -} - -###################################################################### -# About page -# - -# T2H_PRE_ABOUT might be a function -$T2H_PRE_ABOUT = <texi2html -

-EOT -$T2H_AFTER_ABOUT = ''; - -sub T2H_DEFAULT_about_body -{ - my $about; - if (ref($T2H_PRE_ABOUT) eq 'CODE') - { - $about = &$T2H_PRE_ABOUT(); - } - else - { - $about = $T2H_PRE_ABOUT; - } - $about .= <

- - - - - - - -EOT - - for $button (@T2H_SECTION_BUTTONS) - { - next if $button eq ' ' || ref($button) eq 'CODE'; - $about .= < - - - - -EOT - } - - $about .= < -

-where the Example assumes that the current position -is at Subsubsection One-Two-Three of a document of -the following structure: -
    -
  • 1. Section One
    • -
      -
    • 1.1 Subsection One-One
      • -
        -
      • ...
        • -
      -
    • 1.2 Subsection One-Two
      • -
        -
      • 1.2.1 Subsubsection One-Two-One -
      • 1.2.2 Subsubsection One-Two-Two -
      • 1.2.3 Subsubsection One-Two-Three     -<== Current Position -
      • 1.2.4 Subsubsection One-Two-Four -
      -
    • 1.3 Subsection One-Three
      • -
        -
      • ...
        • -
      -
    • 1.4 Subsection One-Four
      • -
    -
-$T2H_AFTER_ABOUT -EOT - return $about; -} - - -%T2H_BUTTONS_GOTO = - ( - 'Top', 'cover (top) of document', - 'Contents', 'table of contents', - 'Overview', 'short table of contents', - 'Index', 'concept index', - 'Back', 'previous section in reading order', - 'FastBack', 'previous or up-and-previous section ', - 'Prev', 'previous section same level', - 'Up', 'up section', - 'Next', 'next section same level', - 'Forward', 'next section in reading order', - 'FastForward', 'next or up-and-next section', - 'About' , 'this page', - 'First', 'first section in reading order', - 'Last', 'last section in reading order', - ); - -%T2H_BUTTONS_EXAMPLE = -( - 'Top', '   ', - 'Contents', '   ', - 'Overview', '   ', - 'Index', '   ', - 'Back', '1.2.2', - 'FastBack', '1.1', - 'Prev', '1.2.2', - 'Up', '1.2', - 'Next', '1.2.4', - 'Forward', '1.2.4', - 'FastForward', '1.3', - 'About', '   ', - 'First', '1.', - 'Last', '1.2.4', -); - - -###################################################################### -# from here on, its l2h init stuff -# - -## initialization for latex2html as for Singular manual generation -## obachman 3/99 - -# -# Options controlling Titles, File-Names, Tracing and Sectioning -# -$TITLE = ''; - -$SHORTEXTN = 0; - -$LONG_TITLES = 0; - -$DESTDIR = ''; # should be overwritten by cmd-line argument - -$NO_SUBDIR = 0;# should be overwritten by cmd-line argument - -$PREFIX = ''; # should be overwritten by cmd-line argument - -$AUTO_PREFIX = 0; # this is needed, so that prefix settings are used - -$AUTO_LINK = 0; - -$SPLIT = 0; - -$MAX_LINK_DEPTH = 0; - -$TMP = ''; # should be overwritten by cmd-line argument - -$DEBUG = 0; - -$VERBOSE = 1; - -# -# Options controlling Extensions and Special Features -# -$HTML_VERSION = "3.2"; - -$TEXDEFS = 1; # we absolutely need that - -$EXTERNAL_FILE = ''; - -$SCALABLE_FONTS = 1; - -$NO_SIMPLE_MATH = 1; - -$LOCAL_ICONS = 1; - -$SHORT_INDEX = 0; - -$NO_FOOTNODE = 1; - -$ADDRESS = ''; - -$INFO = ''; - -# -# Switches controlling Image Generation -# -$ASCII_MODE = 0; - -$NOLATEX = 0; - -$EXTERNAL_IMAGES = 0; - -$PS_IMAGES = 0; - -$NO_IMAGES = 0; - -$IMAGES_ONLY = 0; - -$REUSE = 2; - -$ANTI_ALIAS = 1; - -$ANTI_ALIAS_TEXT = 1; - -# -#Switches controlling Navigation Panels -# -$NO_NAVIGATION = 1; -$ADDRESS = ''; -$INFO = 0; # 0 = do not make a "About this document..." section - -# -#Switches for Linking to other documents -# -# actuall -- we don't care - -$MAX_SPLIT_DEPTH = 0; # Stop making separate files at this depth - -$MAX_LINK_DEPTH = 0; # Stop showing child nodes at this depth - -$NOLATEX = 0; # 1 = do not pass unknown environments to Latex - -$EXTERNAL_IMAGES = 0; # 1 = leave the images outside the document - -$ASCII_MODE = 0; # 1 = do not use any icons or internal images - -# 1 = use links to external postscript images rather than inlined bitmap -# images. -$PS_IMAGES = 0; -$SHOW_SECTION_NUMBERS = 0; - -### Other global variables ############################################### -$CHILDLINE = ""; - -# This is the line width measured in pixels and it is used to right justify -# equations and equation arrays; -$LINE_WIDTH = 500; - -# Used in conjunction with AUTO_NAVIGATION -$WORDS_IN_PAGE = 300; - -# Affects ONLY the way accents are processed -$default_language = 'english'; - -# The value of this variable determines how many words to use in each -# title that is added to the navigation panel (see below) -# -$WORDS_IN_NAVIGATION_PANEL_TITLES = 0; - -# This number will determine the size of the equations, special characters, -# and anything which will be converted into an inlined image -# *except* "image generating environments" such as "figure", "table" -# or "minipage". -# Effective values are those greater than 0. -# Sensible values are between 0.1 - 4. -$MATH_SCALE_FACTOR = 1.5; - -# This number will determine the size of -# image generating environments such as "figure", "table" or "minipage". -# Effective values are those greater than 0. -# Sensible values are between 0.1 - 4. -$FIGURE_SCALE_FACTOR = 1.6; - - -# If both of the following two variables are set then the "Up" button -# of the navigation panel in the first node/page of a converted document -# will point to $EXTERNAL_UP_LINK. $EXTERNAL_UP_TITLE should be set -# to some text which describes this external link. -$EXTERNAL_UP_LINK = ""; -$EXTERNAL_UP_TITLE = ""; - -# If this is set then the resulting HTML will look marginally better if viewed -# with Netscape. -$NETSCAPE_HTML = 1; - -# Valid paper sizes are "letter", "legal", "a4","a3","a2" and "a0" -# Paper sizes has no effect other than in the time it takes to create inlined -# images and in whether large images can be created at all ie -# - larger paper sizes *MAY* help with large image problems -# - smaller paper sizes are quicker to handle -$PAPERSIZE = "a4"; - -# Replace "english" with another language in order to tell LaTeX2HTML that you -# want some generated section titles (eg "Table of Contents" or "References") -# to appear in a different language. Currently only "english" and "french" -# is supported but it is very easy to add your own. See the example in the -# file "latex2html.config" -$TITLES_LANGUAGE = "english"; - -1; # This must be the last non-comment line - -# End File texi2html.init -###################################################################### - - -require "$ENV{T2H_HOME}/texi2html.init" - if ($0 =~ /\.pl$/ && - -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init"); - -#+++############################################################################ -# # -# Initialization # -# Pasted content of File $(srcdir)/MySimple.pm: Command-line processing # -# # -#---############################################################################ - -# leave this within comments, and keep the require statement -# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init -# exists. - -# -package Getopt::MySimple; - -# Name: -# Getopt::MySimple. -# -# Documentation: -# POD-style (incomplete) documentation is in file MySimple.pod -# -# Tabs: -# 4 spaces || die. -# -# Author: -# Ron Savage rpsavage@ozemail.com.au. -# 1.00 19-Aug-97 Initial version. -# 1.10 13-Oct-97 Add arrays of switches (eg '=s@'). -# 1.20 3-Dec-97 Add 'Help' on a per-switch basis. -# 1.30 11-Dec-97 Change 'Help' to 'verbose'. Make all hash keys lowercase. -# 1.40 10-Nov-98 Change width of help report. Restructure tests. -# 1-Jul-00 Modifications for Texi2html - -# -------------------------------------------------------------------------- -# Locally modified by obachman (Display type instead of env, order by cmp) -# $Id: MySimple.pm,v 1.1 2000/07/03 08:44:13 obachman Exp $ - -# use strict; -# no strict 'refs'; - -use vars qw(@EXPORT @EXPORT_OK @ISA); -use vars qw($fieldWidth $opt $VERSION); - -use Exporter(); -use Getopt::Long; - -@ISA = qw(Exporter); -@EXPORT = qw(); -@EXPORT_OK = qw($opt); # An alias for $self -> {'opt'}. - -# -------------------------------------------------------------------------- - -$fieldWidth = 20; -$VERSION = '1.41'; - -# -------------------------------------------------------------------------- - -sub byOrder -{ - my($self) = @_; - - return uc($a) cmp (uc($b)); -} - -# -------------------------------------------------------------------------- - -sub dumpOptions -{ - my($self) = @_; - - print 'Option', ' ' x ($fieldWidth - length('Option') ), "Value\n"; - - for (sort byOrder keys(%{$self -> {'opt'} }) ) - { - print "-$_", ' ' x ($fieldWidth - (1 + length) ), "${$self->{'opt'} }{$_}\n"; - } - - print "\n"; - -} # End of dumpOptions. - -# -------------------------------------------------------------------------- -# Return: -# 0 -> Error. -# 1 -> Ok. - -sub getOptions -{ - push(@_, 0) if ($#_ == 2); # Default for $ignoreCase is 0. - push(@_, 1) if ($#_ == 3); # Default for $helpThenExit is 1. - - my($self, $default, $helpText, $versionText, - $helpThenExit, $versionThenExit, $ignoreCase) = @_; - - $helpThenExit = 1 unless (defined($helpThenExit)); - $versionThenExit = 1 unless (defined($versionThenExit)); - $ignoreCase = 0 unless (defined($ignoreCase)); - - $self -> {'default'} = $default; - $self -> {'helpText'} = $helpText; - $self -> {'versionText'} = $versionText; - $Getopt::Long::ignorecase = $ignoreCase; - - unless (defined($self -> {'default'}{'help'})) - { - $self -> {'default'}{'help'} = - { - type => ':i', - default => '', - linkage => sub {$self->helpOptions($_[1]); exit (0) if $helpThenExit;}, - verbose => "print help and exit" - }; - } - - unless (defined($self -> {'default'}{'version'})) - { - $self -> {'default'}{'version'} = - { - type => '', - default => '', - linkage => sub {print $self->{'versionText'}; exit (0) if versionTheExit;}, - verbose => "print version and exit" - }; - } - - for (keys(%{$self -> {'default'} }) ) - { - my $type = ${$self -> {'default'} }{$_}{'type'}; - push(@{$self -> {'type'} }, "$_$type"); - $self->{'opt'}->{$_} = ${$self -> {'default'} }{$_}{'linkage'} - if ${$self -> {'default'} }{$_}{'linkage'}; - } - - my($result) = &GetOptions($self -> {'opt'}, @{$self -> {'type'} }); - - return $result unless $result; - - for (keys(%{$self -> {'default'} }) ) - { - if (! defined(${$self -> {'opt'} }{$_})) #{ - { - ${$self -> {'opt'} }{$_} = ${$self -> {'default'} }{$_}{'default'}; - } - } - - $result; -} # End of getOptions. - -# -------------------------------------------------------------------------- - -sub helpOptions -{ - my($self) = shift; - my($noHelp) = shift; - $noHelp = 0 unless $noHelp; - my($optwidth, $typewidth, $defaultwidth, $maxlinewidth, $valind, $valwidth) - = (10, 5, 9, 78, 4, 11); - - print "$self->{'helpText'}" if ($self -> {'helpText'}); - - print ' Option', ' ' x ($optwidth - length('Option') -1 ), - 'Type', ' ' x ($typewidth - length('Type') + 1), - 'Default', ' ' x ($defaultwidth - length('Default') ), - "Description\n"; - - for (sort byOrder keys(%{$self -> {'default'} }) ) - { - my($line, $help, $option, $val); - $option = $_; - next if ${$self->{'default'} }{$_}{'noHelp'} && ${$self->{'default'} }{$_}{'noHelp'} > $noHelp; - $line = " -$_ " . ' ' x ($optwidth - (2 + length) ) . - "${$self->{'default'} }{$_}{'type'} ". - ' ' x ($typewidth - (1+length(${$self -> {'default'} }{$_}{'type'}) )); - - $val = ${$self->{'default'} }{$_}{'linkage'}; - if ($val) - { - if (ref($val) eq 'SCALAR') - { - $val = $$val; - } - else - { - $val = ''; - } - } - else - { - $val = ${$self->{'default'} }{$_}{'default'}; - } - $line .= "$val "; - $line .= ' ' x ($optwidth + $typewidth + $defaultwidth + 1 - length($line)); - - if (defined(${$self -> {'default'} }{$_}{'verbose'}) && - ${$self -> {'default'} }{$_}{'verbose'} ne '') - { - $help = "${$self->{'default'} }{$_}{'verbose'}"; - } - else - { - $help = ' '; - } - if ((length("$line") + length($help)) < $maxlinewidth) - { - print $line , $help, "\n"; - } - else - { - print $line, "\n", ' ' x $valind, $help, "\n"; - } - for $val (sort byOrder keys(%{${$self->{'default'}}{$option}{'values'}})) - { - print ' ' x ($valind + 2); - print $val, ' ', ' ' x ($valwidth - length($val) - 2); - print ${$self->{'default'}}{$option}{'values'}{$val}, "\n"; - } - } - - print <| ! no argument: variable is set to 1 on -foo (or, to 0 on -nofoo) - =s | :s mandatory (or, optional) string argument - =i | :i mandatory (or, optional) integer argument -EOT -} # End of helpOptions. - -#------------------------------------------------------------------- - -sub new -{ - my($class) = @_; - my($self) = {}; - $self -> {'default'} = {}; - $self -> {'helpText'} = ''; - $self -> {'opt'} = {}; - $opt = $self -> {'opt'}; # An alias for $self -> {'opt'}. - $self -> {'type'} = (); - - return bless $self, $class; - -} # End of new. - -# -------------------------------------------------------------------------- - -1; - -# End MySimple.pm - -require "$ENV{T2H_HOME}/MySimple.pm" - if ($0 =~ /\.pl$/ && - -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init"); - -package main; - -#+++############################################################################ -# # -# Constants # -# # -#---############################################################################ - -$DEBUG_TOC = 1; -$DEBUG_INDEX = 2; -$DEBUG_BIB = 4; -$DEBUG_GLOSS = 8; -$DEBUG_DEF = 16; -$DEBUG_HTML = 32; -$DEBUG_USER = 64; -$DEBUG_L2H = 128; - - -$BIBRE = '\[[\w\/-]+\]'; # RE for a bibliography reference -$FILERE = '[\/\w.+-]+'; # RE for a file name -$VARRE = '[^\s\{\}]+'; # RE for a variable name -$NODERE = '[^,:]+'; # RE for a node name -$NODESRE = '[^:]+'; # RE for a list of node names - -$ERROR = "***"; # prefix for errors -$WARN = "**"; # prefix for warnings - - # program home page -$PROTECTTAG = "_ThisIsProtected_"; # tag to recognize protected sections - -$CHAPTEREND = "\n"; # to know where a chpater ends -$SECTIONEND = "\n"; # to know where section ends -$TOPEND = "\n"; # to know where top ends - - - -# -# pre-defined indices -# -$index_properties = -{ - 'c' => { name => 'cp'}, - 'f' => { name => 'fn', code => 1}, - 'v' => { name => 'vr', code => 1}, - 'k' => { name => 'ky', code => 1}, - 'p' => { name => 'pg', code => 1}, - 't' => { name => 'tp', code => 1} -}; - - -%predefined_index = ( - 'cp', 'c', - 'fn', 'f', - 'vr', 'v', - 'ky', 'k', - 'pg', 'p', - 'tp', 't', - ); - -# -# valid indices -# -%valid_index = ( - 'c', 1, - 'f', 1, - 'v', 1, - 'k', 1, - 'p', 1, - 't', 1, - ); - -# -# texinfo section names to level -# -%sec2level = ( - 'top', 0, - 'chapter', 1, - 'unnumbered', 1, - 'majorheading', 1, - 'chapheading', 1, - 'appendix', 1, - 'section', 2, - 'unnumberedsec', 2, - 'heading', 2, - 'appendixsec', 2, - 'appendixsection', 2, - 'subsection', 3, - 'unnumberedsubsec', 3, - 'subheading', 3, - 'appendixsubsec', 3, - 'subsubsection', 4, - 'unnumberedsubsubsec', 4, - 'subsubheading', 4, - 'appendixsubsubsec', 4, - ); - -# -# accent map, TeX command to ISO name -# -%accent_map = ( - '"', 'uml', - '~', 'tilde', - '^', 'circ', - '`', 'grave', - '\'', 'acute', - ); - -# -# texinfo "simple things" (@foo) to HTML ones -# -%simple_map = ( - # cf. makeinfo.c - "*", "
", # HTML+ - " ", " ", - "\t", " ", - "-", "­", # soft hyphen - "\n", "\n", - "|", "", - 'tab', '<\/TD>
Button Name Go to From 1.2.3 go to
-EOT - $about .= - ($T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ? - &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{$button}) : - " [" . $T2H_NAVIGATION_TEXT{$button} . "] "); - $about .= < - -$button - -$T2H_BUTTONS_GOTO{$button} - -$T2H_BUTTONS_EXAMPLE{$button} -
', - # spacing commands - ":", "", - "!", "!", - "?", "?", - ".", ".", - "-", "", - ); - -# -# texinfo "things" (@foo{}) to HTML ones -# -%things_map = ( - 'TeX', 'TeX', - 'br', '

', # paragraph break - 'bullet', '*', - 'copyright', '(C)', - 'dots', '...<\/small>', - 'enddots', '....<\/small>', - 'equiv', '==', - 'error', 'error-->', - 'expansion', '==>', - 'minus', '-', - 'point', '-!-', - 'print', '-|', - 'result', '=>', - 'today', $T2H_TODAY, - 'aa', 'å', - 'AA', 'Å', - 'ae', 'æ', - 'oe', 'œ', - 'AE', 'Æ', - 'OE', 'Œ', - 'o', 'ø', - 'O', 'Ø', - 'ss', 'ß', - 'l', '\/l', - 'L', '\/L', - 'exclamdown', '¡', - 'questiondown', '¿', - 'pounds', '£' - ); - -# -# texinfo styles (@foo{bar}) to HTML ones -# -%style_map = ( - 'acronym', '&do_acronym', - 'asis', '', - 'b', 'B', - 'cite', 'CITE', - 'code', 'CODE', - 'command', 'CODE', - 'ctrl', '&do_ctrl', # special case - 'dfn', 'EM', # DFN tag is illegal in the standard - 'dmn', '', # useless - 'email', '&do_email', # insert a clickable email address - 'emph', 'EM', - 'env', 'CODE', - 'file', '"TT', # will put quotes, cf. &apply_style - 'i', 'I', - 'kbd', 'KBD', - 'key', 'KBD', - 'math', '&do_math', - 'option', '"SAMP', # will put quotes, cf. &apply_style - 'r', '', # unsupported - 'samp', '"SAMP', # will put quotes, cf. &apply_style - 'sc', '&do_sc', # special case - 'strong', 'STRONG', - 't', 'TT', - 'titlefont', '', # useless - 'uref', '&do_uref', # insert a clickable URL - 'url', '&do_url', # insert a clickable URL - 'var', 'VAR', - 'w', '', # unsupported - 'H', '&do_accent', - 'dotaccent', '&do_accent', - 'ringaccent','&do_accent', - 'tieaccent', '&do_accent', - 'u','&do_accent', - 'ubaraccent','&do_accent', - 'udotaccent','&do_accent', - 'v', '&do_accent', - ',', '&do_accent', - 'dotless', '&do_accent' - ); - -# -# texinfo format (@foo/@end foo) to HTML ones -# -%format_map = ( - 'quotation', 'BLOCKQUOTE', - # lists - 'itemize', 'UL', - 'enumerate', 'OL', - # poorly supported - 'flushleft', 'PRE', - 'flushright', 'PRE', - ); - -# -# an eval of these $complex_format_map->{what}->[0] yields beginning -# an eval of these $complex_format_map->{what}->[1] yieleds end -$complex_format_map = -{ - example => - [ - q{"$T2H_EXAMPLE_INDENT_CELL
"},
-  q{'
'} - ], - smallexample => - [ - q{"$T2H_SMALL_EXAMPLE_INDENT_CELL
"},
-  q{'
'} - ], - display => - [ - q{"$T2H_EXAMPLE_INDENT_CELL
'},
-  q{'
'} - ], - smalldisplay => - [ - q{"$T2H_SMALL_EXAMPLE_INDENT_CELL
'},
-  q{'
'} - ] -}; - -$complex_format_map->{lisp} = $complex_format_map->{example}; -$complex_format_map->{smalllisp} = $complex_format_map->{smallexample}; -$complex_format_map->{format} = $complex_format_map->{display}; -$complex_format_map->{smallformat} = $complex_format_map->{smalldisplay}; - -# -# texinfo definition shortcuts to real ones -# -%def_map = ( - # basic commands - 'deffn', 0, - 'defvr', 0, - 'deftypefn', 0, - 'deftypevr', 0, - 'defcv', 0, - 'defop', 0, - 'deftp', 0, - # basic x commands - 'deffnx', 0, - 'defvrx', 0, - 'deftypefnx', 0, - 'deftypevrx', 0, - 'defcvx', 0, - 'defopx', 0, - 'deftpx', 0, - # shortcuts - 'defun', 'deffn Function', - 'defmac', 'deffn Macro', - 'defspec', 'deffn {Special Form}', - 'defvar', 'defvr Variable', - 'defopt', 'defvr {User Option}', - 'deftypefun', 'deftypefn Function', - 'deftypevar', 'deftypevr Variable', - 'defivar', 'defcv {Instance Variable}', - 'deftypeivar', 'defcv {Instance Variable}', # NEW: FIXME - 'defmethod', 'defop Method', - 'deftypemethod', 'defop Method', # NEW:FIXME - # x shortcuts - 'defunx', 'deffnx Function', - 'defmacx', 'deffnx Macro', - 'defspecx', 'deffnx {Special Form}', - 'defvarx', 'defvrx Variable', - 'defoptx', 'defvrx {User Option}', - 'deftypefunx', 'deftypefnx Function', - 'deftypevarx', 'deftypevrx Variable', - 'defivarx', 'defcvx {Instance Variable}', - 'defmethodx', 'defopx Method', - ); - -# -# things to skip -# -%to_skip = ( - # comments - 'c', 1, - 'comment', 1, - 'ifnotinfo', 1, - 'ifnottex', 1, - 'ifhtml', 1, - 'end ifhtml', 1, - 'end ifnotinfo', 1, - 'end ifnottex', 1, - # useless - 'detailmenu', 1, - 'direntry', 1, - 'contents', 1, - 'shortcontents', 1, - 'summarycontents', 1, - 'footnotestyle', 1, - 'end ifclear', 1, - 'end ifset', 1, - 'titlepage', 1, - 'end titlepage', 1, - # unsupported commands (formatting) - 'afourpaper', 1, - 'cropmarks', 1, - 'finalout', 1, - 'headings', 1, - 'sp', 1, - 'need', 1, - 'page', 1, - 'setchapternewpage', 1, - 'everyheading', 1, - 'everyfooting', 1, - 'evenheading', 1, - 'evenfooting', 1, - 'oddheading', 1, - 'oddfooting', 1, - 'smallbook', 1, - 'vskip', 1, - 'filbreak', 1, - 'paragraphindent', 1, - # unsupported formats - 'cartouche', 1, - 'end cartouche', 1, - 'group', 1, - 'end group', 1, - ); - -#+++############################################################################ -# # -# Argument parsing, initialisation # -# # -#---############################################################################ - -# -# flush stdout and stderr after every write -# -select(STDERR); -$| = 1; -select(STDOUT); -$| = 1; - - -%value = (); # hold texinfo variables, see also -D -$use_bibliography = 1; -$use_acc = 1; - -# -# called on -init-file -sub LoadInitFile -{ - my $init_file = shift; - # second argument is value of options - $init_file = shift; - if (-f $init_file) - { - print "# reading initialization file from $init_file\n" - if ($T2H_VERBOSE); - require($init_file); - } - else - { - print "$ERROR Error: can't read init file $int_file\n"; - $init_file = ''; - } -} - -# -# called on -lang -sub SetDocumentLanguage -{ - my $lang = shift; - if (! exists($T2H_WORDS->{$lang})) - { - warn "$ERROR: Language specs for '$lang' do not exists. Reverting to '" . - ($T2H_LANG ? T2H_LANG : "en") . "'\n"; - } - else - { - print "# using '$lang' as document language\n" if ($T2H_VERBOSE); - $T2H_LANG = $lang; - } -} - -## -## obsolete cmd line options -## -$T2H_OBSOLETE_OPTIONS -> {'no-section_navigation'} = -{ - type => '!', - linkage => sub {$main::T2H_SECTION_NAVIGATION = 0;}, - verbose => 'obsolete, use -nosec_nav', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {use_acc} = -{ - type => '!', - linkage => \$use_acc, - verbose => 'obsolete', - noHelp => 2 -}; -$T2H_OBSOLETE_OPTIONS -> {expandinfo} = -{ - type => '!', - linkage => sub {$main::T2H_EXPAND = 'info';}, - verbose => 'obsolete, use "-expand info" instead', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {expandtex} = -{ - type => '!', - linkage => sub {$main::T2H_EXPAND = 'tex';}, - verbose => 'obsolete, use "-expand tex" instead', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {monolithic} = -{ - type => '!', - linkage => sub {$main::T2H_SPLIT = '';}, - verbose => 'obsolete, use "-split no" instead', - noHelp => 2 -}; -$T2H_OBSOLETE_OPTIONS -> {split_node} = -{ - type => '!', - linkage => sub{$main::T2H_SPLIT = 'section';}, - verbose => 'obsolete, use "-split section" instead', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {split_chapter} = -{ - type => '!', - linkage => sub{$main::T2H_SPLIT = 'chapter';}, - verbose => 'obsolete, use "-split chapter" instead', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {no_verbose} = -{ - type => '!', - linkage => sub {$main::T2H_VERBOSE = 0;}, - verbose => 'obsolete, use -noverbose instead', - noHelp => 2, -}; -$T2H_OBSOLETE_OPTIONS -> {output_file} = -{ - type => '=s', - linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';}, - verbose => 'obsolete, use -out_file instead', - noHelp => 2 -}; - -$T2H_OBSOLETE_OPTIONS -> {section_navigation} = -{ - type => '!', - linkage => \$T2H_SECTION_NAVIGATION, - verbose => 'obsolete, use -sec_nav instead', - noHelp => 2, -}; - -$T2H_OBSOLETE_OPTIONS -> {verbose} = -{ - type => '!', - linkage => \$T2H_VERBOSE, - verbose => 'obsolete, use -Verbose instead', - noHelp => 2 -}; - -# read initialzation from $sysconfdir/texi2htmlrc or $HOME/.texi2htmlrc -my $home = $ENV{HOME}; -defined($home) or $home = ''; -foreach $i ('/usr/local/etc/texi2htmlrc', "$home/.texi2htmlrc") { - if (-f $i) { - print "# reading initialization file from $i\n" - if ($T2H_VERBOSE); - require($i); - } -} - - -#+++############################################################################ -# # -# parse command-line options -# # -#---############################################################################ -$T2H_USAGE_TEXT = <getOptions($T2H_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n")) -{ - print $Configure_failed if $Configure_failed; - die $T2H_FAILURE_TEXT; -} - -if (@ARGV > 1) -{ - eval {Getopt::Long::Configure("no_pass_through");}; - if (! $options->getOptions($T2H_OBSOLETE_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n")) - { - print $Configure_failed if $Configure_failed; - die $T2H_FAILURE_TEXT; - } -} - -if ($T2H_CHECK) { - die "Need file to check\n$T2H_FAILURE_TEXT" unless @ARGV > 0; - ✓ - exit; -} - -#+++############################################################################ -# # -# evaluation of cmd line options -# # -#---############################################################################ - -if ($T2H_EXPAND eq 'info') -{ - $to_skip{'ifinfo'} = 1; - $to_skip{'end ifinfo'} = 1; -} -elsif ($T2H_EXPAND eq 'tex') -{ - $to_skip{'iftex'} = 1; - $to_skip{'end iftex'} = 1; - -} - -$T2H_INVISIBLE_MARK = '' if $T2H_INVISIBLE_MARK eq 'xbm'; - -# -# file name buisness -# -die "Need exactly one file to translate\n$T2H_FAILURE_TEXT" unless @ARGV == 1; -$docu = shift(@ARGV); -if ($docu =~ /.*\//) { - chop($docu_dir = $&); - $docu_name = $'; -} else { - $docu_dir = '.'; - $docu_name = $docu; -} -unshift(@T2H_INCLUDE_DIRS, $docu_dir); -$docu_name =~ s/\.te?x(i|info)?$//; # basename of the document -$docu_name = $T2H_PREFIX if ($T2H_PREFIX); - -# subdir -if ($T2H_SUBDIR && ! $T2H_OUT) -{ - $T2H_SUBDIR =~ s|/*$||; - unless (-d "$T2H_SUBDIR" && -w "$T2H_SUBDIR") - { - if ( mkdir($T2H_SUBDIR, oct(755))) - { - print "# created directory $T2H_SUBDIR\n" if ($T2H_VERBOSE); - } - else - { - warn "$ERROR can't create directory $T2H_SUBDIR. Put results into current directory\n"; - $T2H_SUBDIR = ''; - } - } -} - -if ($T2H_SUBDIR && ! $T2H_OUT) -{ - $docu_rdir = "$T2H_SUBDIR/"; - print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE); -} -else -{ - if ($T2H_OUT && $T2H_OUT =~ m|(.*)/|) - { - $docu_rdir = "$1/"; - print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE); - } - else - { - print "# putting result files into current directory \n" if ($T2H_VERBOSE); - $docu_rdir = ''; - } -} - -# extension -if ($T2H_SHORTEXTN) -{ - $docu_ext = "htm"; -} -else -{ - $docu_ext = "html"; -} -if ($T2H_TOP_FILE =~ /\..*$/) -{ - $T2H_TOP_FILE = $`.".$docu_ext"; -} - -# result files -if (! $T2H_OUT && ($T2H_SPLIT =~ /section/i || $T2H_SPLIT =~ /node/i)) -{ - $T2H_SPLIT = 'section'; -} -elsif (! $T2H_OUT && $T2H_SPLIT =~ /chapter/i) -{ - $T2H_SPLIT = 'chapter' -} -else -{ - undef $T2H_SPLIT; -} - -$docu_doc = "$docu_name.$docu_ext"; # document's contents -$docu_doc_file = "$docu_rdir$docu_doc"; -if ($T2H_SPLIT) -{ - $docu_toc = $T2H_TOC_FILE || "${docu_name}_toc.$docu_ext"; # document's table of contents - $docu_stoc = "${docu_name}_ovr.$docu_ext"; # document's short toc - $docu_foot = "${docu_name}_fot.$docu_ext"; # document's footnotes - $docu_about = "${docu_name}_abt.$docu_ext"; # about this document - $docu_top = $T2H_TOP_FILE || $docu_doc; -} -else -{ - if ($T2H_OUT) - { - $docu_doc = $T2H_OUT; - $docu_doc =~ s|.*/||; - } - $docu_toc = $docu_foot = $docu_stoc = $docu_about = $docu_top = $docu_doc; -} - -$docu_toc_file = "$docu_rdir$docu_toc"; -$docu_stoc_file = "$docu_rdir$docu_stoc"; -$docu_foot_file = "$docu_rdir$docu_foot"; -$docu_about_file = "$docu_rdir$docu_about"; -$docu_top_file = "$docu_rdir$docu_top"; - -$docu_frame_file = "$docu_rdir${docu_name}_frame.$docu_ext"; -$docu_toc_frame_file = "$docu_rdir${docu_name}_toc_frame.$docu_ext"; - -# -# variables -# -$value{'html'} = 1; # predefine html (the output format) -$value{'texi2html'} = $THISVERSION; # predefine texi2html (the translator) -# _foo: internal to track @foo -foreach ('_author', '_title', '_subtitle', - '_settitle', '_setfilename', '_shorttitle') { - $value{$_} = ''; # prevent -w warnings -} -%node2sec = (); # node to section name -%sec2node = (); # section to node name -%sec2number = (); # section to number -%number2sec = (); # number to section -%idx2node = (); # index keys to node -%node2href = (); # node to HREF -%node2next = (); # node to next -%node2prev = (); # node to prev -%node2up = (); # node to up -%bib2href = (); # bibliography reference to HREF -%gloss2href = (); # glossary term to HREF -@sections = (); # list of sections -%tag2pro = (); # protected sections - -# -# initial indexes -# -$bib_num = 0; -$foot_num = 0; -$gloss_num = 0; -$idx_num = 0; -$sec_num = 0; -$doc_num = 0; -$html_num = 0; - -# -# can I use ISO8879 characters? (HTML+) -# -if ($T2H_USE_ISO) { - $things_map{'bullet'} = "•"; - $things_map{'copyright'} = "©"; - $things_map{'dots'} = "…"; - $things_map{'equiv'} = "≡"; - $things_map{'expansion'} = "→"; - $things_map{'point'} = "∗"; - $things_map{'result'} = "⇒"; -} - -# -# read texi2html extensions (if any) -# -$extensions = 'texi2html.ext'; # extensions in working directory -if (-f $extensions) { - print "# reading extensions from $extensions\n" if $T2H_VERBOSE; - require($extensions); -} -($progdir = $0) =~ s/[^\/]+$//; -if ($progdir && ($progdir ne './')) { - $extensions = "${progdir}texi2html.ext"; # extensions in texi2html directory - if (-f $extensions) { - print "# reading extensions from $extensions\n" if $T2H_VERBOSE; - require($extensions); - } -} - - -print "# reading from $docu\n" if $T2H_VERBOSE; - -######################################################################### -# -# latex2html stuff -# -# latex2html conversions consist of three stages: -# 1) ToLatex: Put "latex" code into a latex file -# 2) ToHtml: Use latex2html to generate corresponding html code and images -# 3) FromHtml: Extract generated code and images from latex2html run -# - -########################## -# default settings -# - -# defaults for files and names - -sub l2h_Init -{ - local($root) = @_; - - return 0 unless ($root); - - $l2h_name = "${root}_l2h"; - - $l2h_latex_file = "$docu_rdir${l2h_name}.tex"; - $l2h_cache_file = "${docu_rdir}l2h_cache.pm"; - $T2H_L2H_L2H = "latex2html" unless ($T2H_L2H_L2H); - - # destination dir -- generated images are put there, should be the same - # as dir of enclosing html document -- - $l2h_html_file = "$docu_rdir${l2h_name}.html"; - $l2h_prefix = "${l2h_name}_"; - return 1; -} - - -########################## -# -# First stage: Generation of Latex file -# Initialize with: l2h_InitToLatex -# Add content with: l2h_ToLatex($text) --> HTML placeholder comment -# Finish with: l2h_FinishToLatex -# - -$l2h_latex_preample = <$l2h_latex_file")) - { - warn "$ERROR Error l2h: Can't open latex file '$latex_file' for writing\n"; - return 0; - } - print "# l2h: use ${l2h_latex_file} as latex file\n" if ($T2H_VERBOSE); - print L2H_LATEX $l2h_latex_preample; - } - # open database for caching - l2h_InitCache(); - $l2h_latex_count = 0; - $l2h_to_latex_count = 0; - $l2h_cached_count = 0; - return 1; -} - -# print text (1st arg) into latex file (if not already there), return -# HTML commentary which can be later on replaced by the latex2html -# generated text -sub l2h_ToLatex -{ - my($text) = @_; - my($count); - - $l2h_to_latex_count++; - $text =~ s/(\s*)$//; - - # try whether we can cache it - my $cached_text = l2h_FromCache($text); - if ($cached_text) - { - $l2h_cached_count++; - return $cached_text; - } - - # try whether we have text already on things to do - unless ($count = $l2h_to_latex{$text}) - { - $count = $l2h_latex_count; - $l2h_latex_count++; - $l2h_to_latex{$text} = $count; - $l2h_to_latex[$count] = $text; - unless ($T2H_L2H_SKIP) - { - print L2H_LATEX "\\begin{rawhtml}\n"; - print L2H_LATEX "\n"; - print L2H_LATEX "\\end{rawhtml}\n"; - - print L2H_LATEX "$text\n"; - - print L2H_LATEX "\\begin{rawhtml}\n"; - print L2H_LATEX "\n"; - print L2H_LATEX "\\end{rawhtml}\n"; - } - } - return ""; -} - -# print closing into latex file and close it -sub l2h_FinishToLatex -{ - local ($reused); - - $reused = $l2h_to_latex_count - $l2h_latex_count - $l2h_cached_count; - unless ($T2H_L2H_SKIP) - { - print L2H_LATEX $l2h_latex_closing; - close(L2H_LATEX); - } - print "# l2h: finished to latex ($l2h_cached_count cached, $reused reused, $l2h_latex_count contents)\n" if ($T2H_VERBOSE); - unless ($l2h_latex_count) - { - l2h_Finish(); - return 0; - } - return 1; -} - -################################### -# Second stage: Use latex2html to generate corresponding html code and images -# -# l2h_ToHtml([$l2h_latex_file, [$l2h_html_dir]]): -# Call latex2html on $l2h_latex_file -# Put images (prefixed with $l2h_name."_") and html file(s) in $l2h_html_dir -# Return 1, on success -# 0, otherwise -# -sub l2h_ToHtml -{ - local($call, $ext, $root, $dotbug); - - if ($T2H_L2H_SKIP) - { - print "# l2h: skipping latex2html run\n" if ($T2H_VERBOSE); - return 1; - } - - # Check for dot in directory where dvips will work - if ($T2H_L2H_TMP) - { - if ($T2H_L2H_TMP =~ /\./) - { - warn "$ERROR Warning l2h: l2h_tmp dir contains a dot. Use /tmp, instead\n"; - $dotbug = 1; - } - } - else - { - if (&getcwd =~ /\./) - { - warn "$ERROR Warning l2h: current dir contains a dot. Use /tmp as l2h_tmp dir \n"; - $dotbug = 1; - } - } - # fix it, if necessary and hope that it works - $T2H_L2H_TMP = "/tmp" if ($dotbug); - - $call = $T2H_L2H_L2H; - # use init file, if specified - $call = $call . " -init_file " . $init_file if ($init_file && -f $init_file); - # set output dir - $call .= ($docu_rdir ? " -dir $docu_rdir" : " -no_subdir"); - # use l2h_tmp, if specified - $call = $call . " -tmp $T2H_L2H_TMP" if ($T2H_L2H_TMP); - # options we want to be sure of - $call = $call ." -address 0 -info 0 -split 0 -no_navigation -no_auto_link"; - $call = $call ." -prefix ${l2h_prefix} $l2h_latex_file"; - - print "# l2h: executing '$call'\n" if ($T2H_VERBOSE); - if (system($call)) - { - warn "l2h ***Error: '${call}' did not succeed\n"; - return 0; - } - else - { - print "# l2h: latex2html finished successfully\n" if ($T2H_VERBOSE); - return 1; - } -} - -# this is directly pasted over from latex2html -sub getcwd { - local($_) = `pwd`; - - die "'pwd' failed (out of memory?)\n" - unless length; - chop; - $_; -} - - -########################## -# Third stage: Extract generated contents from latex2html run -# Initialize with: l2h_InitFromHtml -# open $l2h_html_file for reading -# reads in contents into array indexed by numbers -# return 1, on success -- 0, otherwise -# Extract Html code with: l2h_FromHtml($text) -# replaces in $text all previosuly inserted comments by generated html code -# returns (possibly changed) $text -# Finish with: l2h_FinishFromHtml -# closes $l2h_html_dir/$l2h_name.".$docu_ext" - -sub l2h_InitFromHtml -{ - local($h_line, $h_content, $count, %l2h_img); - - if (! open(L2H_HTML, "<${l2h_html_file}")) - { - print "$ERROR Error l2h: Can't open ${l2h_html_file} for reading\n"; - return 0; - } - print "# l2h: use ${l2h_html_file} as html file\n" if ($T2H_VERBOSE); - - $l2h_html_count = 0; - - while ($h_line = ) - { - if ($h_line =~ /^/) - { - $count = $1; - $h_content = ""; - while ($h_line = ) - { - if ($h_line =~ /^/) - { - chomp $h_content; - chomp $h_content; - $l2h_html_count++; - $h_content = l2h_ToCache($count, $h_content); - $l2h_from_html[$count] = $h_content; - $h_content = ''; - last; - } - $h_content = $h_content.$h_line; - } - if ($hcontent) - { - print "$ERROR Warning l2h: l2h_end $l2h_name $count not found\n" - if ($T2H_VERBOSE); - close(L2H_HTML); - return 0; - } - } - } - print "# l2h: Got $l2h_html_count of $l2h_latex_count html contents\n" - if ($T2H_VERBOSE); - - close(L2H_HTML); - return 1; -} - -sub l2h_FromHtml -{ - local($text) = @_; - local($done, $to_do, $count); - - $to_do = $text; - - while ($to_do =~ /([^\000]*)([^\000]*)/) - { - $to_do = $1; - $count = $2; - $done = $3.$done; - - $done = "".$done - if ($T2H_DEBUG & $DEBUG_L2H); - - $done = &l2h_ExtractFromHtml($count) . $done; - - $done = "".$done - if ($T2H_DEBUG & $DEBUG_L2H); - } - return $to_do.$done; -} - - -sub l2h_ExtractFromHtml -{ - local($count) = @_; - - return $l2h_from_html[$count] if ($l2h_from_html[$count]); - - if ($count >= 0 && $count < $l2h_latex_count) - { - # now we are in trouble - local($l_l2h, $_); - - $l2h_extract_error++; - print "$ERROR l2h: can't extract content $count from html\n" - if ($T2H_VERBOSE); - # try simple (ordinary) substition (without l2h) - $l_l2h = $T2H_L2H; - $T2H_L2H = 0; - $_ = $l2h_to_latex{$count}; - $_ = &substitute_style($_); - &unprotect_texi; - $_ = "" . $_ - if ($T2H_DEBUG & $DEBUG_L2H); - $T2H_L2H = $l_l2h; - return $_; - } - else - { - # now we have been incorrectly called - $l2h_range_error++; - print "$ERROR l2h: Request of $count content which is out of valide range [0,$l2h_latex_count)\n"; - return "" - if ($T2H_DEBUG & $DEBUG_L2H); - return ""; - } -} - -sub l2h_FinishFromHtml -{ - if ($T2H_VERBOSE) - { - if ($l2h_extract_error + $l2h_range_error) - { - print "# l2h: finished from html ($l2h_extract_error extract and $l2h_range_error errors)\n"; - } - else - { - print "# l2h: finished from html (no errors)\n"; - } - } -} - -sub l2h_Finish -{ - l2h_StoreCache(); - if ($T2H_L2H_CLEAN) - { - print "# l2h: removing temporary files generated by l2h extension\n" - if $T2H_VERBOSE; - while (<"$docu_rdir$l2h_name"*>) - { - unlink $_; - } - } - print "# l2h: Finished\n" if $T2H_VERBOSE; - return 1; -} - -############################## -# stuff for l2h caching -# - -# I tried doing this with a dbm data base, but it did not store all -# keys/values. Hence, I did as latex2html does it -sub l2h_InitCache -{ - if (-r "$l2h_cache_file") - { - my $rdo = do "$l2h_cache_file"; - warn("$ERROR l2h Error: could not load $docu_rdir$l2h_cache_file: $@\n") - unless ($rdo); - } -} - -sub l2h_StoreCache -{ - return unless $l2h_latex_count; - - my ($key, $value); - open(FH, ">$l2h_cache_file") || return warn"$ERROR l2h Error: could not open $docu_rdir$l2h_cache_file for writing: $!\n"; - - - while (($key, $value) = each %l2h_cache) - { - # escape stuff - $key =~ s|/|\\/|g; - $key =~ s|\\\\/|\\/|g; - # weird, a \ at the end of the key results in an error - # maybe this also broke the dbm database stuff - $key =~ s|\\$|\\\\|; - $value =~ s/\|/\\\|/g; - $value =~ s/\\\\\|/\\\|/g; - $value =~ s|\\\\|\\\\\\\\|g; - print FH "\n\$l2h_cache_key = q/$key/;\n"; - print FH "\$l2h_cache{\$l2h_cache_key} = q|$value|;\n"; - } - print FH "1;"; - close(FH); -} - -# return cached html, if it exists for text, and if all pictures -# are there, as well -sub l2h_FromCache -{ - my $text = shift; - my $cached = $l2h_cache{$text}; - if ($cached) - { - while ($cached =~ m/SRC="(.*?)"/g) - { - unless (-e "$docu_rdir$1") - { - return undef; - } - } - return $cached; - } - return undef; -} - -# insert generated html into cache, move away images, -# return transformed html -$maximage = 1; -sub l2h_ToCache -{ - my $count = shift; - my $content = shift; - my @images = ($content =~ /SRC="(.*?)"/g); - my ($src, $dest); - - for $src (@images) - { - $dest = $l2h_img{$src}; - unless ($dest) - { - my $ext; - if ($src =~ /.*\.(.*)$/ && $1 ne $docu_ext) - { - $ext = $1; - } - else - { - warn "$ERROR: L2h image $src has invalid extension\n"; - next; - } - while (-e "$docu_rdir${docu_name}_$maximage.$ext") { $maximage++;} - $dest = "${docu_name}_$maximage.$ext"; - system("cp -f $docu_rdir$src $docu_rdir$dest"); - $l2h_img{$src} = $dest; - unlink "$docu_rdir$src" unless ($DEBUG & DEBUG_L2H); - } - $content =~ s/$src/$dest/g; - } - $l2h_cache{$l2h_to_latex[$count]} = $content; - return $content; -} - - -#+++############################################################################ -# # -# Pass 1: read source, handle command, variable, simple substitution # -# # -#---############################################################################ - -@lines = (); # whole document -@toc_lines = (); # table of contents -@stoc_lines = (); # table of contents -$curlevel = 0; # current level in TOC -$node = ''; # current node name -$node_next = ''; # current node next name -$node_prev = ''; # current node prev name -$node_up = ''; # current node up name -$in_table = 0; # am I inside a table -$table_type = ''; # type of table ('', 'f', 'v', 'multi') -@tables = (); # nested table support -$in_bibliography = 0; # am I inside a bibliography -$in_glossary = 0; # am I inside a glossary -$in_top = 0; # am I inside the top node -$has_top = 0; # did I see a top node? -$has_top_command = 0; # did I see @top for automatic pointers? -$in_pre = 0; # am I inside a preformatted section -$in_list = 0; # am I inside a list -$in_html = 0; # am I inside an HTML section -$first_line = 1; # is it the first line -$dont_html = 0; # don't protect HTML on this line -$deferred_ref = ''; # deferred reference for indexes -@html_stack = (); # HTML elements stack -$html_element = ''; # current HTML element -&html_reset; -%macros = (); # macros - -# init l2h -$T2H_L2H = &l2h_Init($docu_name) if ($T2H_L2H); -$T2H_L2H = &l2h_InitToLatex if ($T2H_L2H); - -# build code for simple substitutions -# the maps used (%simple_map and %things_map) MUST be aware of this -# watch out for regexps, / and escaped characters! -$subst_code = ''; -foreach (keys(%simple_map)) { - ($re = $_) =~ s/(\W)/\\$1/g; # protect regexp chars - $subst_code .= "s/\\\@$re/$simple_map{$_}/g;\n"; -} -foreach (keys(%things_map)) { - $subst_code .= "s/\\\@$_\\{\\}/$things_map{$_}/g;\n"; -} -if ($use_acc) { - # accentuated characters - foreach (keys(%accent_map)) { - if ($_ eq "`") { - $subst_code .= "s/$;3"; - } elsif ($_ eq "'") { - $subst_code .= "s/$;4"; - } else { - $subst_code .= "s/\\\@\\$_"; - } - $subst_code .= "([a-z])/&\${1}$accent_map{$_};/gi;\n"; - } -} -eval("sub simple_substitutions { $subst_code }"); - -&init_input; -INPUT_LINE: while ($_ = &next_line) { - # - # remove \input on the first lines only - # - if ($first_line) { - next if /^\\input/; - $first_line = 0; - } - # non-@ substitutions cf. texinfmt.el - # - # parse texinfo tags - # - $tag = ''; - $end_tag = ''; - if (/^\s*\@end\s+(\w+)\b/) { - $end_tag = $1; - } elsif (/^\s*\@(\w+)\b/) { - $tag = $1; - } - # - # handle @html / @end html - # - if ($in_html) { - if ($end_tag eq 'html') { - $in_html = 0; - } else { - $tag2pro{$in_html} .= $_; - } - next; - } elsif ($tag eq 'html') { - $in_html = $PROTECTTAG . ++$html_num; - push(@lines, $in_html); - next; - } - - # - # try to remove inlined comments - # syntax from tex-mode.el comment-start-skip - # - s/((^|[^\@])(\@\@)*)\@c(omment | |\{|$).*/$1/; - -# Sometimes I use @c right at the end of a line ( to suppress the line feed ) -# s/((^|[^\@])(\@\@)*)\@c(omment)?$/$1/; -# s/((^|[^\@])(\@\@)*)\@c(omment)? .*/$1/; -# s/(.*)\@c{.*?}(.*)/$1$2/; -# s/(.*)\@comment{.*?}(.*)/$1$2/; -# s/^(.*)\@c /$1/; -# s/^(.*)\@comment /$1/; - - ############################################################# - # value substitution before macro expansion, so that - # it works in macro arguments - s/\@value{($VARRE)}/$value{$1}/eg; - - ############################################################# - # macro substitution - while (/\@(\w+)/g) - { - if (exists($macros->{$1})) - { - my $before = $`; - my $name = $1; - my $after = $'; - my @args; - my $args; - if ($after =~ /^\s*{(.*?[^\\])}(.*)/) - { - $args = $1; - $after = $2; - } - elsif (@{$macros->{$name}->{Args}} == 1) - { - $args = $after; - $args =~ s/^\s*//; - $args =~ s/\s*$//; - $after = ''; - } - $args =~ s|\\\\|\\|g; - $args =~ s|\\{|{|g; - $args =~ s|\\}|}|g; - if (@{$macros->{$name}->{Args}} > 1) - { - $args =~ s/(^|[^\\]),/$1$;/g ; - $args =~ s|\\,|,|g; - @args = split(/$;\s*/, $args) if (@{$macros->{$name}->{Args}} > 1); - } - else - { - $args =~ s|\\,|,|g; - @args = ($args); - } - my $macrobody = $macros->{$name}->{Body}; - for ($i=0; $i<=$#args; $i++) - { - $macrobody =~ s|\\$macros->{$name}->{Args}->[$i]\\|$args[$i]|g; - } - $macrobody =~ s|\\\\|\\|g; - $_ = $before . $macrobody . $after; - unshift @input_spool, map {$_ = $_."\n"} split(/\n/, $_); - next INPUT_LINE; - } - } # - - - # - # try to skip the line - # - if ($end_tag) { - $in_titlepage = 0 if $end_tag eq 'titlepage'; - next if $to_skip{"end $end_tag"}; - } elsif ($tag) { - $in_titlepage = 1 if $tag eq 'titlepage'; - next if $to_skip{$tag}; - last if $tag eq 'bye'; - } - if ($in_top) { - # parsing the top node - if ($tag eq 'node' || - ($sec2level{$tag} && $tag !~ /unnumbered/ && $tag !~ /heading/)) - { - # no more in top - $in_top = 0; - push(@lines, $TOPEND); - } - } - unless ($in_pre) { - s/``/\"/g; - s/''/\"/g; - s/([\w ])---([\w ])/$1--$2/g; - } - # - # analyze the tag - # - if ($tag) { - # skip lines - &skip_until($tag), next if $tag eq 'ignore'; - &skip_until($tag), next if $tag eq 'ifnothtml'; - if ($tag eq 'ifinfo') - { - &skip_until($tag), next unless $T2H_EXPAND eq 'info'; - } - if ($tag eq 'iftex') - { - &skip_until($tag), next unless $T2H_EXPAND eq 'tex'; - } - if ($tag eq 'tex') - { - # add to latex2html file - if ($T2H_EXPAND eq 'tex' && $T2H_L2H && ! $in_pre) - { - # add space to the end -- tex(i2dvi) does this, as well - push(@lines, &l2h_ToLatex(&string_until($tag) . " ")); - } - else - { - &skip_until($tag); - } - next; - } - if ($tag eq 'titlepage') - { - next; - } - # handle special tables - if ($tag =~ /^(|f|v|multi)table$/) { - $table_type = $1; - $tag = 'table'; - } - # special cases - if ($tag eq 'top' || ($tag eq 'node' && /^\@node\s+top\s*,/i)) { - $in_top = 1; - $has_top = 1; - $has_top_command = 1 if $tag eq 'top'; - @lines = (); # ignore all lines before top (title page garbage) - next; - } elsif ($tag eq 'node') { - if ($in_top) - { - $in_top = 0; - push(@lines, $TOPEND); - } - warn "$ERROR Bad node line: $_" unless $_ =~ /^\@node\s$NODESRE$/o; - # request of "Richard Y. Kim" - s/^\@node\s+//; - $_ = &protect_html($_); # if node contains '&' for instance - ($node, $node_next, $node_prev, $node_up) = split(/,/); - &normalise_node($node); - &normalise_node($node_next); - &normalise_node($node_prev); - &normalise_node($node_up); - $node =~ /\"/ ? - push @lines, &html_debug("\n", __LINE__) : - push @lines, &html_debug("\n", __LINE__); - next; - } elsif ($tag eq 'include') { - if (/^\@include\s+($FILERE)\s*$/o) { - $file = LocateIncludeFile($1); - if ($file && -e $file) { - &open($file); - print "# including $file\n" if $T2H_VERBOSE; - } else { - warn "$ERROR Can't find $1, skipping"; - } - } else { - warn "$ERROR Bad include line: $_"; - } - next; - } elsif ($tag eq 'ifclear') { - if (/^\@ifclear\s+($VARRE)\s*$/o) { - next unless defined($value{$1}); - &skip_until($tag); - } else { - warn "$ERROR Bad ifclear line: $_"; - } - next; - } elsif ($tag eq 'ifset') { - if (/^\@ifset\s+($VARRE)\s*$/o) { - next if defined($value{$1}); - &skip_until($tag); - } else { - warn "$ERROR Bad ifset line: $_"; - } - next; - } elsif ($tag eq 'menu') { - unless ($T2H_SHOW_MENU) { - &skip_until($tag); - next; - } - &html_push_if($tag); - push(@lines, &html_debug('', __LINE__)); - } elsif ($format_map{$tag}) { - $in_pre = 1 if $format_map{$tag} eq 'PRE'; - &html_push_if($format_map{$tag}); - push(@lines, &html_debug('', __LINE__)); - $in_list++ if $format_map{$tag} eq 'UL' || $format_map{$tag} eq 'OL' ; -# push(@lines, &debug("

\n", __LINE__)) -# if $tag =~ /example/i; - # sunshine@sunshineco.com: 
bla
looks better than - # 
\nbla
(at least on NeXTstep browser - push(@lines, &debug("<$format_map{$tag}>" . - ($in_pre ? '' : "\n"), __LINE__)); - next; - } - elsif (exists $complex_format_map->{$tag}) - { - my $start = eval $complex_format_map->{$tag}->[0]; - if ($@) - { - print "$ERROR: eval of complex_format_map->{$tag}->[0] $complex_format_map->{$tag}->[0]: $@"; - $start = '
'
-	  }
-	  $in_pre = 1 if $start =~ /
\n", __LINE__));
-		    &html_push_if('TABLE');
-		} else {
-		    push(@lines, &debug("
\n", __LINE__));
-		    &html_push_if('DL');
-		}
-		push(@lines, &html_debug('', __LINE__));
-	    } else {
-		warn "$ERROR Bad table line: $_";
-	    }
-	    next;
-	} 
-	elsif ($tag eq 'synindex' || $tag eq 'syncodeindex') 
-	{
-	  if (/^\@$tag\s+(\w+)\s+(\w+)\s*$/) 
-	  {
-	    my $from = $1;
-	    my $to = $2;
-	    my $prefix_from = IndexName2Prefix($from);
-	    my $prefix_to = IndexName2Prefix($to);
-
-	    warn("$ERROR unknown from index name $from ind syn*index line: $_"), next
-	      unless $prefix_from;
-	    warn("$ERROR unknown to index name $to ind syn*index line: $_"), next
-	      unless $prefix_to;
-
-	    if ($tag eq 'syncodeindex')
-	    {
-	      $index_properties->{$prefix_to}->{'from_code'}->{$prefix_from} = 1;
-	    }
-	    else
-	    {
-	       $index_properties->{$prefix_to}->{'from'}->{$prefix_from} = 1;
-	    }
-	  } 
-	  else 
-	  {
-	    warn "$ERROR Bad syn*index line: $_";
-	  }
-	  next;
-	} 
-	elsif ($tag eq 'defindex' || $tag eq 'defcodeindex') 
-	{
-	  if (/^\@$tag\s+(\w+)\s*$/) 
-	  {
-	    my $name = $1;
-	    $index_properties->{$name}->{name} = $name;
-	    $index_properties->{$name}->{code} = 1 if $tag eq 'defcodeindex';
-	  } 
-	  else 
-	  {
-	    warn "$ERROR Bad defindex line: $_";
-	  }
-	  next;
-	}
-	elsif (/^\@printindex/)
-	{
-	  push (@lines, "$_");
-	  next;
-	}
-	elsif ($tag eq 'sp') {
-	    push(@lines, &debug("
\n", __LINE__));
-	    next;
-	} elsif ($tag eq 'center') {
-	    push(@lines, &debug("
\n", __LINE__));
-	    s/\@center//;
-	} elsif ($tag eq 'setref') {
-	    &protect_html; # if setref contains '&' for instance
-	    if (/^\@$tag\s*{($NODERE)}\s*$/) {
-		$setref = $1;
-		$setref =~ s/\s+/ /g; # normalize
-		$setref =~ s/ $//;
-		$node2sec{$setref} = $name;
-		$sec2node{$name} = $setref;
-		$node2href{$setref} = "$docu_doc#$docid";
-	    } else {
-		warn "$ERROR Bad setref line: $_";
-	    }
-	    next;
-	} elsif ($tag eq 'lowersections') {
-	    local ($sec, $level);
-	    while (($sec, $level) = each %sec2level) {
-		$sec2level{$sec} = $level + 1;
-	    }
-	    next;
-	} elsif ($tag eq 'raisesections') {
-	    local ($sec, $level);
-	    while (($sec, $level) = each %sec2level) {
-		$sec2level{$sec} = $level - 1;
-	    }
-	    next;
-	}
-	elsif ($tag eq 'macro' || $tag eq 'rmacro')
-	{
-	  if (/^\@$tag\s*(\w+)\s*(.*)/)
-	  {
-	    my $name = $1;
-	    my @args;
-	    @args = split(/\s*,\s*/ , $1)
-	      if ($2 =~ /^\s*{(.*)}\s*/);
-	    
-	    $macros->{$name}->{Args} = \@args;
-	    $macros->{$name}->{Body} = '';
-	    while (($_ = &next_line) && $_ !~ /\@end $tag/)
-	    {
-	      $macros->{$name}->{Body} .= $_;
-	    }
-	    die "ERROR: No closing '\@end $tag' found for macro definition of '$name'\n"
-	      unless (/\@end $tag/);
-	    chomp $macros->{$name}->{Body};
-	  }
-	  else
-	  {
-	    warn "$ERROR: Bad macro defintion $_"
-	  }
-	  next;
-	}
-	elsif ($tag eq 'unmacro')
-	{
-	  delete $macros->{$1} if (/^\@unmacro\s*(\w+)/);
-	  next;
-	}
-	elsif ($tag eq 'documentlanguage')
-	{
-	  SetDocumentLanguage($1) if (!$T2H_LANG && /documentlanguage\s*(\w+)/);
-	}
-	elsif (defined($def_map{$tag})) {
-	    if ($def_map{$tag}) {
-		s/^\@$tag\s+//;
-		$tag = $def_map{$tag};
-		$_ = "\@$tag $_";
-		$tag =~ s/\s.*//;
-	    }
-	} elsif (defined($user_sub{$tag})) {
-	    s/^\@$tag\s+//;
-	    $sub = $user_sub{$tag};
-	    print "# user $tag = $sub, arg: $_" if $T2H_DEBUG & $DEBUG_USER;
-	    if (defined(&$sub)) {
-		chop($_);
-		&$sub($_);
-	    } else {
-		warn "$ERROR Bad user sub for $tag: $sub\n";
-	    }
-	    next;
-	  } 
-	if (defined($def_map{$tag})) {
-	    s/^\@$tag\s+//;
-	    if ($tag =~ /x$/) {
-		# extra definition line
-		$tag = $`;
-		$is_extra = 1;
-	    } else {
-		$is_extra = 0;
-	    }
-	    while (/\{([^\{\}]*)\}/) {
-		# this is a {} construct
-		($before, $contents, $after) = ($`, $1, $');
-		# protect spaces
-		$contents =~ s/\s+/$;9/g;
-		# restore $_ protecting {}
-		$_ = "$before$;7$contents$;8$after";
-	    }
-	    @args = split(/\s+/, &protect_html($_));
-	    foreach (@args) {
-		s/$;9/ /g;	# unprotect spaces
-		s/$;7/\{/g;	# ... {
-		s/$;8/\}/g;	# ... }
-	    }
-	    $type = shift(@args);
-	    $type =~ s/^\{(.*)\}$/$1/;
-	    print "# def ($tag): {$type} ", join(', ', @args), "\n"
-		if $T2H_DEBUG & $DEBUG_DEF;
-	    $type .= ':'; # it's nicer like this
-	    my $name = shift(@args);
-	    $name =~ s/^\{(.*)\}$/$1/;
-	    if ($is_extra) {
-		$_ = &debug("
", __LINE__);
-	    } else {
-		$_ = &debug("
\n
", __LINE__);
-	    }
-	    if ($tag eq 'deffn' || $tag eq 'defvr' || $tag eq 'deftp') {
-		$_ .= "$type $name";
-		$_ .= " @args" if @args;
-	    } elsif ($tag eq 'deftypefn' || $tag eq 'deftypevr'
-		     || $tag eq 'defcv' || $tag eq 'defop') {
-		$ftype = $name;
-		$name = shift(@args);
-		$name =~ s/^\{(.*)\}$/$1/;
-		$_ .= "$type $ftype $name";
-		$_ .= " @args" if @args;
-	    } else {
-		warn "$ERROR Unknown definition type: $tag\n";
-		$_ .= "$type $name";
-		$_ .= " @args" if @args;
-	    }
- 	    $_ .= &debug("\n
", __LINE__);
-	    $name = &unprotect_html($name);
-	    if ($tag eq 'deffn' || $tag eq 'deftypefn') {
-	      EnterIndexEntry('f', $name, $docu_doc, $section, \@lines);
-#		unshift(@input_spool, "\@findex $name\n");
-	    } elsif ($tag eq 'defop') {
-	      EnterIndexEntry('f', "$name on $ftype", $docu_doc, $section, \@lines);
-#		unshift(@input_spool, "\@findex $name on $ftype\n");
-	    } elsif ($tag eq 'defvr' || $tag eq 'deftypevr' || $tag eq 'defcv') {
-	      EnterIndexEntry('v', $name, $docu_doc, $section, \@lines);
-#		unshift(@input_spool, "\@vindex $name\n");
-	    } else {
-	      EnterIndexEntry('t', $name, $docu_doc, $section, \@lines);
-#		unshift(@input_spool, "\@tindex $name\n");
-	    }
-	    $dont_html = 1;
-	}
-    } elsif ($end_tag) {
-	if ($format_map{$end_tag}) {
-	    $in_pre = 0 if $format_map{$end_tag} eq 'PRE';
-	    $in_list-- if $format_map{$end_tag} eq 'UL' || $format_map{$end_tag} eq 'OL' ;
-	    &html_pop_if('P');
-	    &html_pop_if('LI');
-	    &html_pop_if();
-	    push(@lines, &debug("\n", __LINE__));
-	    push(@lines, &html_debug('', __LINE__));
-	}
-	elsif (exists $complex_format_map->{$end_tag})
-	{
-	  my $end = eval $complex_format_map->{$end_tag}->[1];
-	  if ($@)
-	  {
-	    print "$ERROR: eval of complex_format_map->{$end_tag}->[1] $complex_format_map->{$end_tag}->[0]: $@";
-	    $end = '
'
-	  }
-	  $in_pre = 0 if $end =~ m|
|; - push(@lines, html_debug($end, __LINE__)); - } elsif ($end_tag =~ /^(|f|v|multi)table$/) { - unless (@tables) { - warn "$ERROR \@end $end_tag without \@*table\n"; - next; - } - &html_pop_if('P'); - ($table_type, $in_table) = split($;, shift(@tables)); - unless ($1 eq $table_type) { - warn "$ERROR \@end $end_tag without matching \@$end_tag\n"; - next; - } - if ($table_type eq "multi") { - push(@lines, "
\n"); - &html_pop_if('TR'); - } else { - push(@lines, "\n"); - &html_pop_if('DD'); - } - &html_pop_if(); - if (@tables) { - ($table_type, $in_table) = split($;, $tables[0]); - } else { - $in_table = 0; - } - } elsif (defined($def_map{$end_tag})) { - push(@lines, &debug("\n", __LINE__)); - } elsif ($end_tag eq 'menu') { - &html_pop_if(); - push(@lines, $_); # must keep it for pass 2 - } - next; - } - ############################################################# - # anchor insertion - while (/\@anchor\s*\{(.*?)\}/) - { - $_ = $`.$'; - my $anchor = $1; - $anchor = &normalise_node($anchor); - push @lines, &html_debug("\n"); - $node2href{$anchor} = "$docu_doc#$anchor"; - next INPUT_LINE if $_ =~ /^\s*$/; - } - - ############################################################# - # index entry generation, after value substitutions - if (/^\@(\w+?)index\s+/) - { - EnterIndexEntry($1, $', $docu_doc, $section, \@lines); - next; - } - # - # protect texi and HTML things - &protect_texi; - $_ = &protect_html($_) unless $dont_html; - $dont_html = 0; - # substitution (unsupported things) - s/^\@exdent\s+//g; - s/\@noindent\s+//g; - s/\@refill\s+//g; - # other substitutions - &simple_substitutions; - s/\@footnote\{/\@footnote$docu_doc\{/g; # mark footnotes, cf. pass 4 - # - # analyze the tag again - # - if ($tag) { - if (defined($sec2level{$tag}) && $sec2level{$tag} > 0) { - if (/^\@$tag\s+(.+)$/) { - $name = $1; - $name = &normalise_node($name); - $level = $sec2level{$tag}; - # check for index - $first_index_chapter = $node - if ($level == 1 && !$first_index_chapter && - $name =~ /index/i); - if ($in_top && /heading/){ - $T2H_HAS_TOP_HEADING = 1; - $_ = &debug("$name\n", __LINE__); - &html_push_if('body'); - print "# top heading, section $name, level $level\n" - if $T2H_DEBUG & $DEBUG_TOC; - } - else - { - unless (/^\@\w*heading/) - { - unless (/^\@unnumbered/) - { - my $number = &update_sec_num($tag, $level); - $name = $number. ' ' . $name if $T2H_NUMBER_SECTIONS; - $sec2number{$name} = $number; - $number2sec{$number} = $name; - } - if (defined($toplevel)) - { - push @lines, ($level==$toplevel ? $CHAPTEREND : $SECTIONEND); - } - else - { - # first time we see a "section" - unless ($level == 1) - { - warn "$WARN The first section found is not of level 1: $_"; - } - $toplevel = $level; - } - push(@sections, $name); - next_doc() if ($T2H_SPLIT eq 'section' || - $T2H_SPLIT && $level == $toplevel); - } - $sec_num++; - $docid = "SEC$sec_num"; - $tocid = (/^\@\w*heading/ ? undef : "TOC$sec_num"); - # check biblio and glossary - $in_bibliography = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*bibliography$/i); - $in_glossary = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*glossary$/i); - # check node - if ($node) - { - warn "$ERROR Duplicate node found: $node\n" - if ($node2sec{$node}); - } - else - { - $name .= ' ' while ($node2sec{$name}); - $node = $name; - } - $name .= ' ' while ($sec2node{$name}); - $section = $name; - $node2sec{$node} = $name; - $sec2node{$name} = $node; - $node2href{$node} = "$docu_doc#$docid"; - $node2next{$node} = $node_next; - $node2prev{$node} = $node_prev; - $node2up{$node} = $node_up; - print "# node $node, section $name, level $level\n" - if $T2H_DEBUG & $DEBUG_TOC; - - $node = ''; - $node_next = ''; - $node_prev = ''; - $node_next = ''; - if ($tocid) - { - # update TOC - while ($level > $curlevel) { - $curlevel++; - push(@toc_lines, "
    \n"); - } - while ($level < $curlevel) { - $curlevel--; - push(@toc_lines, "
\n"); - } - $_ = &t2h_anchor($tocid, "$docu_doc#$docid", $name, 1); - $_ = &substitute_style($_); - push(@stoc_lines, "$_
\n") if ($level == 1); - if ($T2H_NUMBER_SECTIONS) - { - push(@toc_lines, $_ . "
\n") - } - else - { - push(@toc_lines, "
  • " . $_ ."
    • "); - } - } - else - { - push(@lines, &html_debug("\n", - __LINE__)); - } - # update DOC - push(@lines, &html_debug('', __LINE__)); - &html_reset; - $_ = " $name \n\n"; - $_ = &debug($_, __LINE__); - push(@lines, &html_debug('', __LINE__)); - } - # update DOC - foreach $line (split(/\n+/, $_)) { - push(@lines, "$line\n"); - } - next; - } else { - warn "$ERROR Bad section line: $_"; - } - } else { - # track variables - $value{$1} = Unprotect_texi($2), next if /^\@set\s+($VARRE)\s+(.*)$/o; - delete $value{$1}, next if /^\@clear\s+($VARRE)\s*$/o; - # store things - $value{'_shorttitle'} = Unprotect_texi($1), next if /^\@shorttitle\s+(.*)$/; - $value{'_setfilename'} = Unprotect_texi($1), next if /^\@setfilename\s+(.*)$/; - $value{'_settitle'} = Unprotect_texi($1), next if /^\@settitle\s+(.*)$/; - $value{'_author'} .= Unprotect_texi($1)."\n", next if /^\@author\s+(.*)$/; - $value{'_subtitle'} .= Unprotect_texi($1)."\n", next if /^\@subtitle\s+(.*)$/; - $value{'_title'} .= Unprotect_texi($1)."\n", next if /^\@title\s+(.*)$/; - - # list item - if (/^\s*\@itemx?\s+/) { - $what = $'; - $what =~ s/\s+$//; - if ($in_bibliography && $use_bibliography) { - if ($what =~ /^$BIBRE$/o) { - $id = 'BIB' . ++$bib_num; - $bib2href{$what} = "$docu_doc#$id"; - print "# found bibliography for '$what' id $id\n" - if $T2H_DEBUG & $DEBUG_BIB; - $what = &t2h_anchor($id, '', $what); - } - } elsif ($in_glossary && $T2H_USE_GLOSSARY) { - $id = 'GLOSS' . ++$gloss_num; - $entry = $what; - $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; - $gloss2href{$entry} = "$docu_doc#$id"; - print "# found glossary for '$entry' id $id\n" - if $T2H_DEBUG & $DEBUG_GLOSS; - $what = &t2h_anchor($id, '', $what); - } - elsif ($in_table && ($table_type eq 'f' || $table_type eq 'v')) - { - EnterIndexEntry($table_type, $what, $docu_doc, $section, \@lines); - } - &html_pop_if('P'); - if ($html_element eq 'DL' || $html_element eq 'DD') { - if ($things_map{$in_table} && !$what) { - # special case to allow @table @bullet for instance - push(@lines, &debug("
    $things_map{$in_table}\n", __LINE__)); - } else { - push(@lines, &debug("
    \@$in_table\{$what\}\n", __LINE__)); - } - push(@lines, "
    "); - &html_push('DD') unless $html_element eq 'DD'; - if ($table_type) { # add also an index - unshift(@input_spool, "\@${table_type}index $what\n"); - } - } elsif ($html_element eq 'TABLE') { - push(@lines, &debug("$what\n", __LINE__)); - &html_push('TR'); - } elsif ($html_element eq 'TR') { - push(@lines, &debug("\n", __LINE__)); - push(@lines, &debug("$what\n", __LINE__)); - } else { - push(@lines, &debug("
  • $what\n", __LINE__)); - &html_push('LI') unless $html_element eq 'LI'; - } - push(@lines, &html_debug('', __LINE__)); - if ($deferred_ref) { - push(@lines, &debug("$deferred_ref\n", __LINE__)); - $deferred_ref = ''; - } - next; - } elsif (/^\@tab\s+(.*)$/) { - push(@lines, "$1\n"); - next; - } - } - } - # paragraph separator - if ($_ eq "\n" && ! $in_pre) { - next if $#lines >= 0 && $lines[$#lines] eq "\n"; - if ($html_element eq 'P') { - push (@lines, &debug("

    \n", __LINE__)); - } -# else -# { -# push(@lines, "

    \n"); -# $_ = &debug("

    \n", __LINE__); -# } - elsif ($html_element eq 'body' || $html_element eq 'BLOCKQUOTE' || $html_element eq 'DD' || $html_element eq 'LI') - { - &html_push('P'); - push(@lines, &debug("

    \n", __LINE__)); - } - } - # otherwise - push(@lines, $_) unless $in_titlepage; - push(@lines, &debug("

    • \n", __LINE__)) if ($tag eq 'center'); -} - -# finish TOC -$level = 0; -while ($level < $curlevel) { - $curlevel--; - push(@toc_lines, "\n"); -} - -print "# end of pass 1\n" if $T2H_VERBOSE; - -SetDocumentLanguage('en') unless ($T2H_LANG); -#+++############################################################################ -# # -# Stuff related to Index generation # -# # -#---############################################################################ - -sub EnterIndexEntry -{ - my $prefix = shift; - my $key = shift; - my $docu_doc = shift; - my $section = shift; - my $lines = shift; - local $_; - - warn "$ERROR Undefined index command: $_", next - unless (exists ($index_properties->{$prefix})); - $key =~ s/\s+$//; - $_ = $key; - &protect_texi; - $key = $_; - $_ = &protect_html($_); - my $html_key = substitute_style($_); - my $id; - $key = remove_style($key); - $key = remove_things($key); - $_ = $key; - &unprotect_texi; - $key = $_; - while (exists $index->{$prefix}->{$key}) {$key .= ' '}; - if ($lines->[$#lines] =~ /^$/) - { - $id = $1; - } - else - { - $id = 'IDX' . ++$idx_num; - push(@$lines, &t2h_anchor($id, '', $T2H_INVISIBLE_MARK, !$in_pre)); - } - $index->{$prefix}->{$key}->{html_key} = $html_key; - $index->{$prefix}->{$key}->{section} = $section; - $index->{$prefix}->{$key}->{href} = "$docu_doc#$id"; - print "# found ${prefix}index for '$key' with id $id\n" - if $T2H_DEBUG & $DEBUG_INDEX; -} - -sub IndexName2Prefix -{ - my $name = shift; - my $prefix; - - for $prefix (keys %$index_properties) - { - return $prefix if ($index_properties->{$prefix}->{name} eq $name); - } - return undef; -} - -sub GetIndexEntries -{ - my $normal = shift; - my $code = shift; - my ($entries, $prefix, $key) = ({}); - - for $prefix (keys %$normal) - { - for $key (keys %{$index->{$prefix}}) - { - $entries->{$key} = {%{$index->{$prefix}->{$key}}}; - } - } - - if (defined($code)) - { - for $prefix (keys %$code) - { - unless (exists $normal->{$keys}) - { - for $key (keys %{$index->{$prefix}}) - { - $entries->{$key} = {%{$index->{$prefix}->{$key}}}; - $entries->{$key}->{html_key} = "$entries->{$key}->{html_key}"; - } - } - } - } - return $entries; -} - -sub byAlpha -{ - if ($a =~ /^[A-Za-z]/) - { - if ($b =~ /^[A-Za-z]/) - { - return lc($a) cmp lc($b); - } - else - { - return 1; - } - } - elsif ($b =~ /^[A-Za-z]/) - { - return -1; - } - else - { - return lc($a) cmp lc($b); - } -} - -sub GetIndexPages -{ - my $entries = shift; - my (@Letters, $key); - my ($EntriesByLetter, $Pages, $page) = ({}, [], {}); - my @keys = sort byAlpha keys %$entries; - - for $key (@keys) - { - push @{$EntriesByLetter->{uc(substr($key,0, 1))}} , $entries->{$key}; - } - @Letters = sort byAlpha keys %$EntriesByLetter; - - $T2H_SPLIT_INDEX = 0 unless ($T2H_SPLIT); - - unless ($T2H_SPLIT_INDEX) - { - $page->{First} = $Letters[0]; - $page->{Last} = $Letters[$#Letters]; - $page->{Letters} = \@Letters; - $page->{EntriesByLetter} = $EntriesByLetter; - push @$Pages, $page; - return $Pages; - } - - if ($T2H_SPLIT_INDEX =~ /^\d+$/) - { - my $i = 0; - my ($prev_letter, $letter); - $page->{First} = $Letters[0]; - for $letter (@Letters) - { - if ($i > $T2H_SPLIT_INDEX) - { - $page->{Last} = $prev_letter; - push @$Pages, {%$page}; - $page->{Letters} = []; - $page->{EntriesByLetter} = {}; - $page->{First} = $letter; - $i=0; - } - push @{$page->{Letters}}, $letter; - $page->{EntriesByLetter}->{$letter} = [@{$EntriesByLetter->{$letter}}]; - $i += scalar(@{$EntriesByLetter->{$letter}}); - $prev_letter = $letter; - } - $page->{Last} = $Letters[$#Letters]; - push @$Pages, {%$page}; - } - return $Pages; -} - -sub GetIndexSummary -{ - my $first_page = shift; - my $Pages = shift; - my $name = shift; - my ($page, $letter, $summary, $i, $l1, $l2, $l); - - $i = 0; - $summary = '
    Jump to:   '; - - for $page ($first_page, @$Pages) - { - for $letter (@{$page->{Letters}}) - { - $l = t2h_anchor('', "$page->{href}#${name}_$letter", "$letter", - 0, 'style="text-decoration:none"') . "\n   \n"; - - if ($letter =~ /^[A-Za-z]/) - { - $l2 .= $l; - } - else - { - $l1 .= $l; - } - } - } - $summary .= $l1 . "
    \n" if ($l1); - $summary .= $l2 . '

    '; - return $summary; -} - -sub PrintIndexPage -{ - my $lines = shift; - my $summary = shift; - my $page = shift; - my $name = shift; - - push @$lines, $summary; - - push @$lines , <

    - - - -EOT - - for $letter (@{$page->{Letters}}) - { - push @$lines, "\n"; - for $entry (@{$page->{EntriesByLetter}->{$letter}}) - { - push @$lines, - "\n"; - } - push @$lines, "\n"; - } - push @$lines, "
    Index Entry Section
    $letter
    " . - t2h_anchor('', $entry->{href}, $entry->{html_key}) . - "" . - t2h_anchor('', sec_href($entry->{section}), clean_name($entry->{section})) . - "

    "; - push @$lines, $summary; -} - -sub PrintIndex -{ - my $lines = shift; - my $name = shift; - my $section = shift; - $section = 'Top' unless $section; - my $prefix = IndexName2Prefix($name); - - warn ("$ERROR printindex: bad index name: $name"), return - unless $prefix; - - if ($index_properties->{$prefix}->{code}) - { - $index_properties->{$prefix}->{from_code}->{$prefix} = 1; - } - else - { - $index_properties->{$prefix}->{from}->{$prefix}= 1; - } - - my $Entries = GetIndexEntries($index_properties->{$prefix}->{from}, - $index_properties->{$prefix}->{from_code}); - return unless %$Entries; - - if ($T2H_IDX_SUMMARY) - { - my $key; - open(FHIDX, ">$docu_rdir$docu_name" . "_$name.idx") - || die "Can't open > $docu_rdir$docu_name" . "_$name.idx for writing: $!\n"; - print "# writing $name index summary in $docu_rdir$docu_name" . "_$name.idx...\n" if $T2H_VERBOSE; - - for $key (sort keys %$Entries) - { - print FHIDX "$key\t$Entries->{$key}->{href}\n"; - } - } - - my $Pages = GetIndexPages($Entries); - my $page; - my $first_page = shift @$Pages; - my $sec_name = $section; - # remove section number - $sec_name =~ s/.*? // if $sec_name =~ /^([A-Z]|\d+)\./; - - ($first_page->{href} = sec_href($section)) =~ s/\#.*$//; - # Update tree structure of document - if (@$Pages) - { - my $sec; - my @after; - - while (@sections && $sections[$#sections] ne $section) - { - unshift @after, pop @sections; - } - - for $page (@$Pages) - { - my $node = ($page->{First} ne $page->{Last} ? - "$sec_name: $page->{First} -- $page->{Last}" : - "$sec_name: $page->{First}"); - push @sections, $node; - $node2sec{$node} = $node; - $sec2node{$node} = $node; - $node2up{$node} = $section; - $page->{href} = next_doc(); - $page->{name} = $node; - $node2href{$node} = $page->{href}; - if ($prev_node) - { - $node2next{$prev_node} = $node; - $node2prev{$node} = $prev_node; - } - $prev_node = $node; - } - push @sections, @after; - } - - my $summary = GetIndexSummary($first_page, $Pages, $name); - PrintIndexPage($lines, $summary, $first_page, $name); - for $page (@$Pages) - { - push @$lines, ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND); - push @$lines, "

    $page->{name}

    \n"; - PrintIndexPage($lines, $summary, $page, $name); - } -} - - -#+++############################################################################ -# # -# Pass 2/3: handle style, menu, index, cross-reference # -# # -#---############################################################################ - -@lines2 = (); # whole document (2nd pass) -@lines3 = (); # whole document (3rd pass) -$in_menu = 0; # am I inside a menu - -while (@lines) { - $_ = shift(@lines); - # - # special case (protected sections) - # - if (/^$PROTECTTAG/o) { - push(@lines2, $_); - next; - } - # - # menu - # - if (/^\@menu\b/) - { - $in_menu = 1; - $in_menu_listing = 1; - push(@lines2, &debug("
    \n", __LINE__)); - next; - } - if (/^\@end\s+menu\b/) - { - if ($in_menu_listing) - { - push(@lines2, &debug("
    \n", __LINE__)); - } - else - { - push(@lines2, &debug("\n", __LINE__)); - } - $in_menu = 0; - $in_menu_listing = 0; - next; - } - if ($in_menu) - { - my ($node, $name, $descr); - if (/^\*\s+($NODERE)::/o) - { - $node = $1; - $descr = $'; - } - elsif (/^\*\s+(.+):\s+([^\t,\.\n]+)[\t,\.\n]/) - { - $name = $1; - $node = $2; - $descr = $'; - } - elsif (/^\*/) - { - warn "$ERROR Bad menu line: $_"; - } - else - { - if ($in_menu_listing) - { - $in_menu_listing = 0; - push(@lines2, &debug("\n", __LINE__)); - } - # should be like verbatim -- preseve spaces, etc - s/ /\ /g; - $_ .= "
    \n"; - push(@lines2, $_); - } - if ($node) - { - if (! $in_menu_listing) - { - $in_menu_listing = 1; - push(@lines2, &debug("\n", __LINE__)); - } - # look for continuation - while ($lines[0] =~ /^\s+\w+/) - { - $descr .= shift(@lines); - } - &menu_entry($node, $name, $descr); - } - next; - } - # - # printindex - # - PrintIndex(\@lines2, $2, $1), next - if (/^\@printindex\s+(\w+)/); - # - # simple style substitutions - # - $_ = &substitute_style($_); - # - # xref - # - while (/\@(x|px|info|)ref{([^{}]+)(}?)/) { - # note: Texinfo may accept other characters - ($type, $nodes, $full) = ($1, $2, $3); - ($before, $after) = ($`, $'); - if (! $full && $after) { - warn "$ERROR Bad xref (no ending } on line): $_"; - $_ = "$before$;0${type}ref\{$nodes$after"; - next; # while xref - } - if ($type eq 'x') { - $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} "; - } elsif ($type eq 'px') { - $type = "$T2H_WORDS->{$T2H_LANG}->{'see'} "; - } elsif ($type eq 'info') { - $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} Info"; - } else { - $type = ''; - } - unless ($full) { - $next = shift(@lines); - $next = &substitute_style($next); - chop($nodes); # remove final newline - if ($next =~ /\}/) { # split on 2 lines - $nodes .= " $`"; - $after = $'; - } else { - $nodes .= " $next"; - $next = shift(@lines); - $next = &substitute_style($next); - chop($nodes); - if ($next =~ /\}/) { # split on 3 lines - $nodes .= " $`"; - $after = $'; - } else { - warn "$ERROR Bad xref (no ending }): $_"; - $_ = "$before$;0xref\{$nodes$after"; - unshift(@lines, $next); - next; # while xref - } - } - } - $nodes =~ s/\s+/ /g; # remove useless spaces - @args = split(/\s*,\s*/, $nodes); - $node = $args[0]; # the node is always the first arg - $node = &normalise_node($node); - $sec = $args[2] || $args[1] || $node2sec{$node}; - $href = $node2href{$node}; - if (@args == 5) { # reference to another manual - $sec = $args[2] || $node; - $man = $args[4] || $args[3]; - $_ = "${before}${type}$T2H_WORDS->{$T2H_LANG}->{'section'} `$sec' in \@cite{$man}$after"; - } elsif ($type =~ /Info/) { # inforef - warn "$ERROR Wrong number of arguments: $_" unless @args == 3; - ($nn, $_, $in) = @args; - $_ = "${before}${type} file `$in', node `$nn'$after"; - } elsif ($sec && $href && ! $T2H_SHORT_REF) { - $_ = "${before}${type}"; - $_ .= "$T2H_WORDS->{$T2H_LANG}->{'section'} " if ${type}; - $_ .= &t2h_anchor('', $href, $sec) . $after; - } - elsif ($href) - { - $_ = "${before}${type} " . - &t2h_anchor('', $href, $args[2] || $args[1] || $node) . - $after; - } - else { - warn "$ERROR Undefined node ($node): $_"; - $_ = "$before$;0xref{$nodes}$after"; - } - } - - # replace images - s[\@image\s*{(.+?)}] - { - my @args = split (/\s*,\s*/, $1); - my $base = $args[0]; - my $image = - LocateIncludeFile("$base.png") || - LocateIncludeFile("$base.jpg") || - LocateIncludeFile("$base.gif"); - warn "$ERROR no image file for $base: $_" unless ($image && -e $image); - "\"$base\""; - ($T2H_CENTER_IMAGE ? - "
    \"$base\"
    " : - "\"$base\""); - }eg; - - # - # try to guess bibliography references or glossary terms - # - unless (/^/) { - $done .= $pre . &t2h_anchor('', $href, $what); - } else { - $done .= "$pre$what"; - } - $_ = $post; - } - $_ = $done . $_; - } - if ($T2H_USE_GLOSSARY) { - $done = ''; - while (/\b\w+\b/) { - ($pre, $what, $post) = ($`, $&, $'); - $entry = $what; - $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; - $href = $gloss2href{$entry}; - if (defined($href) && $post !~ /^[^<]*<\/A>/) { - $done .= $pre . &t2h_anchor('', $href, $what); - } else { - $done .= "$pre$what"; - } - $_ = $post; - } - $_ = $done . $_; - } - } - # otherwise - push(@lines2, $_); -} -print "# end of pass 2\n" if $T2H_VERBOSE; - -# -# split style substitutions -# -while (@lines2) { - $_ = shift(@lines2); - # - # special case (protected sections) - # - if (/^$PROTECTTAG/o) { - push(@lines3, $_); - next; - } - # - # split style substitutions - # - $old = ''; - while ($old ne $_) { - $old = $_; - if (/\@(\w+)\{/) { - ($before, $style, $after) = ($`, $1, $'); - if (defined($style_map{$style})) { - $_ = $after; - $text = ''; - $after = ''; - $failed = 1; - while (@lines2) { - if (/\}/) { - $text .= $`; - $after = $'; - $failed = 0; - last; - } else { - $text .= $_; - $_ = shift(@lines2); - } - } - if ($failed) { - die "* Bad syntax (\@$style) after: $before\n"; - } else { - $text = &apply_style($style, $text); - $_ = "$before$text$after"; - } - } - } - } - # otherwise - push(@lines3, $_); -} -print "# end of pass 3\n" if $T2H_VERBOSE; - -#+++############################################################################ -# # -# Pass 4: foot notes, final cleanup # -# # -#---############################################################################ - -@foot_lines = (); # footnotes -@doc_lines = (); # final document -$end_of_para = 0; # true if last line is

    - -while (@lines3) { - $_ = shift(@lines3); - # - # special case (protected sections) - # - if (/^$PROTECTTAG/o) { - push(@doc_lines, $_); - $end_of_para = 0; - next; - } - # - # footnotes - # - while (/\@footnote([^\{\s]+)\{/) { - ($before, $d, $after) = ($`, $1, $'); - $_ = $after; - $text = ''; - $after = ''; - $failed = 1; - while (@lines3) { - if (/\}/) { - $text .= $`; - $after = $'; - $failed = 0; - last; - } else { - $text .= $_; - $_ = shift(@lines3); - } - } - if ($failed) { - die "* Bad syntax (\@footnote) after: $before\n"; - } else { - $foot_num++; - $docid = "DOCF$foot_num"; - $footid = "FOOT$foot_num"; - $foot = "($foot_num)"; - push(@foot_lines, "

    " . &t2h_anchor($footid, "$d#$docid", $foot) . "

    \n"); - $text = "

    $text" unless $text =~ /^\s*

    /; - push(@foot_lines, "$text\n"); - $_ = $before . &t2h_anchor($docid, "$docu_foot#$footid", $foot) . $after; - } - } - # - # remove unnecessary

    - # - if (/^\s*

    \s*$/) { - next if $end_of_para++; - } else { - $end_of_para = 0; - } - # otherwise - push(@doc_lines, $_); -} - -print "# end of pass 4\n" if $T2H_VERBOSE; - -#+++############################################################################ -# # -# Pass 5: print things # -# # -#---############################################################################ - -$T2H_L2H = &l2h_FinishToLatex if ($T2H_L2H); -$T2H_L2H = &l2h_ToHtml if ($T2H_L2H); -$T2H_L2H = &l2h_InitFromHtml if ($T2H_L2H); - -# fix node2up, node2prev, node2next, if desired -if ($has_top_command) -{ - for $section (keys %sec2number) - { - $node = $sec2node{$section}; - $node2up{$node} = Sec2UpNode($section) unless $node2up{$node}; - $node2prev{$node} = Sec2PrevNode($section) unless $node2prev{$node}; - $node2next{$node} = Sec2NextNode($section) unless $node2next{$node}; - } -} - -# prepare %T2H_THISDOC -$T2H_THISDOC{fulltitle} = $value{'_title'} || $value{'_settitle'} || "Untitled Document"; -$T2H_THISDOC{title} = $value{'_settitle'} || $T2H_THISDOC{fulltitle}; -$T2H_THISDOC{author} = $value{'_author'}; -$T2H_THISDOC{subtitle} = $value{'_subtitle'}; -$T2H_THISDOC{shorttitle} = $value{'_shorttitle'}; -for $key (keys %T2H_THISDOC) -{ - $_ = &substitute_style($T2H_THISDOC{$key}); - &unprotect_texi; - s/\s*$//; - $T2H_THISDOC{$key} = $_; -} - -# if no sections, then simply print document as is -unless (@sections) -{ - print "# Writing content into $docu_top_file \n" if $T2H_VERBOSE; - open(FILE, "> $docu_top_file") - || die "$ERROR: Can't open $docu_top_file for writing: $!\n"; - - &$T2H_print_page_head(\*FILE); - $T2H_THIS_SECTION = \@doc_lines; - t2h_print_lines(\*FILE); - &$T2H_print_foot_navigation(\*FILE); - &$T2H_print_page_foot(\*FILE); - close(FILE); - goto Finish; -} - -# initialize $T2H_HREF, $T2H_NAME -%T2H_HREF = - ( - 'First' , sec_href($sections[0]), - 'Last', sec_href($sections[$#sections]), - 'About', $docu_about. '#SEC_About', - ); - -# prepare TOC, OVERVIEW, TOP -$T2H_TOC = \@toc_lines; -$T2H_OVERVIEW = \@stoc_lines; -if ($has_top) -{ - while (1) - { - $_ = shift @doc_lines; - last if /$TOPEND/; - push @$T2H_TOP, $_; - } - $T2H_HREF{'Top'} = $docu_top . '#SEC_Top'; -} -else -{ - $T2H_HREF{'Top'} = $T2H_HREF{First}; -} - -$node2href{Top} = $T2H_HREF{Top}; -$T2H_HREF{Contents} = $docu_toc.'#SEC_Contents' if @toc_lines; -$T2H_HREF{Overview} = $docu_stoc.'#SEC_OVERVIEW' if @stoc_lines; - -# settle on index -if ($T2H_INDEX_CHAPTER) -{ - $T2H_HREF{Index} = $node2href{normalise_node($T2H_INDEX_CHAPTER)}; - warn "$ERROR T2H_INDEX_CHAPTER '$T2H_INDEX_CHAPTER' not found\n" - unless $T2H_HREF{Index}; -} -if (! $T2H_HREF{Index} && $first_index_chapter) -{ - $T2H_INDEX_CHAPTER = $first_index_chapter; - $T2H_HREF{Index} = $node2href{$T2H_INDEX_CHAPTER}; -} - -print "# Using '" . clean_name($T2H_INDEX_CHAPTER) . "' as index page\n" - if ($T2H_VERBOSE && $T2H_HREF{Index}); - -%T2H_NAME = - ( - 'First', clean_name($sec2node{$sections[0]}), - 'Last', clean_name($sec2node{$sections[$#sections]}), - 'About', $T2H_WORDS->{$T2H_LANG}->{'About_Title'}, - 'Contents', $T2H_WORDS->{$T2H_LANG}->{'ToC_Title'}, - 'Overview', $T2H_WORDS->{$T2H_LANG}->{'Overview_Title'}, - 'Index' , clean_name($T2H_INDEX_CHAPTER), - 'Top', clean_name($T2H_TOP_HEADING || $T2H_THISDOC{'title'} || $T2H_THISDOC{'shorttitle'}), - ); - -############################################################################# -# print frame and frame toc file -# -if ( $T2H_FRAMES ) -{ - open(FILE, "> $docu_frame_file") - || die "$ERROR: Can't open $docu_frame_file for writing: $!\n"; - print "# Creating frame in $docu_frame_file ...\n" if $T2H_VERBOSE; - &$T2H_print_frame(\*FILE); - close(FILE); - - open(FILE, "> $docu_toc_frame_file") - || die "$ERROR: Can't open $docu_toc_frame_file for writing: $!\n"; - print "# Creating toc frame in $docu_frame_file ...\n" if $T2H_VERBOSE; - &$T2H_print_toc_frame(\*FILE); - close(FILE); -} - - -############################################################################# -# print Top -# -open(FILE, "> $docu_top_file") - || die "$ERROR: Can't open $docu_top_file for writing: $!\n"; -&$T2H_print_page_head(\*FILE) unless ($T2H_SPLIT); - -if ($has_top) -{ - print "# Creating Top in $docu_top_file ...\n" if $T2H_VERBOSE; - $T2H_THIS_SECTION = $T2H_TOP; - $T2H_HREF{This} = $T2H_HREF{Top}; - $T2H_NAME{This} = $T2H_NAME{Top}; - &$T2H_print_Top(\*FILE); -} - -close(FILE) if $T2H_SPLIT; - -############################################################################# -# Print sections -# -$T2H_NODE{Forward} = $sec2node{$sections[0]}; -$T2H_NAME{Forward} = &clean_name($sec2node{$sections[0]}); -$T2H_HREF{Forward} = sec_href($sections[0]); -$T2H_NODE{This} = 'Top'; -$T2H_NAME{This} = $T2H_NAME{Top}; -$T2H_HREF{This} = $T2H_HREF{Top}; -if ($T2H_SPLIT) -{ - print "# writing " . scalar(@sections) . - " sections in $docu_rdir$docu_name"."_[1..$doc_num]" - if $T2H_VERBOSE; - $previous = ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND); - undef $FH; - $doc_num = 0; -} -else -{ - print "# writing " . scalar(@sections) . " sections in $docu_top_file ..." - if $T2H_VERBOSE; - $FH = \*FILE; - $previous = ''; -} - -$counter = 0; -# loop through sections -while ($section = shift(@sections)) -{ - if ($T2H_SPLIT && ($T2H_SPLIT eq 'section' || $previous eq $CHAPTEREND)) - { - if ($FH) - { - #close previous page - &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter'; - &$T2H_print_page_foot($FH); - close($FH); - undef $FH; - } - } - $T2H_NAME{Back} = $T2H_NAME{This}; - $T2H_HREF{Back} = $T2H_HREF{This}; - $T2H_NODE{Back} = $T2H_NODE{This}; - $T2H_NAME{This} = $T2H_NAME{Forward}; - $T2H_HREF{This} = $T2H_HREF{Forward}; - $T2H_NODE{This} = $T2H_NODE{Forward}; - if ($sections[0]) - { - $T2H_NODE{Forward} = $sec2node{$sections[0]}; - $T2H_NAME{Forward} = &clean_name($T2H_NODE{Forward}); - $T2H_HREF{Forward} = sec_href($sections[0]); - } - else - { - undef $T2H_HREF{Forward}, $T2H_NODE{Forward}, $T2H_NAME{Forward}; - } - - $node = $node2up{$T2H_NODE{This}}; - $T2H_HREF{Up} = $node2href{$node}; - if ($T2H_HREF{Up} eq $T2H_HREF{This} || ! $T2H_HREF{Up}) - { - $T2H_NAME{Up} = $T2H_NAME{Top}; - $T2H_HREF{Up} = $T2H_HREF{Top}; - $T2H_NODE{Up} = 'Up'; - } - else - { - $T2H_NAME{Up} = &clean_name($node); - $T2H_NODE{Up} = $node; - } - - $node = $T2H_NODE{This}; - $node = $node2prev{$node}; - $T2H_NAME{Prev} = &clean_name($node); - $T2H_HREF{Prev} = $node2href{$node}; - $T2H_NODE{Prev} = $node; - - $node = $T2H_NODE{This}; - if ($node2up{$node} && $node2up{$node} ne 'Top'&& - ($node2prev{$node} eq $T2H_NODE{Back} || ! $node2prev{$node})) - { - $node = $node2up{$node}; - while ($node && $node ne $node2up{$node} && ! $node2prev{$node}) - { - $node = $node2up{$node}; - } - $node = $node2prev{$node} - unless $node2up{$node} eq 'Top' || ! $node2up{$node}; - } - else - { - $node = $node2prev{$node}; - } - $T2H_NAME{FastBack} = &clean_name($node); - $T2H_HREF{FastBack} = $node2href{$node}; - $T2H_NODE{FastBack} = $node; - - $node = $T2H_NODE{This}; - $node = $node2next{$node}; - $T2H_NAME{Next} = &clean_name($node); - $T2H_HREF{Next} = $node2href{$node}; - $T2H_NODE{Next} = $node; - - $node = $T2H_NODE{This}; - if ($node2up{$node} && $node2up{$node} ne 'Top'&& - ($node2next{$node} eq $T2H_NODE{Forward} || ! $node2next{$node})) - { - $node = $node2up{$node}; - while ($node && $node ne $node2up{$node} && ! $node2next{$node}) - { - $node = $node2up{$node}; - } - } - $node = $node2next{$node}; - $T2H_NAME{FastForward} = &clean_name($node); - $T2H_HREF{FastForward} = $node2href{$node}; - $T2H_NODE{FastForward} = $node; - - if (! defined($FH)) - { - my $file = $T2H_HREF{This}; - $file =~ s/\#.*$//; - open(FILE, "> $docu_rdir$file") || - die "$ERROR: Can't open $docu_rdir$file for writing: $!\n"; - $FH = \*FILE; - &$T2H_print_page_head($FH); - t2h_print_label($FH); - &$T2H_print_chapter_header($FH) if $T2H_SPLIT eq 'chapter'; - } - else - { - t2h_print_label($FH); - } - - $T2H_THIS_SECTION = []; - while (@doc_lines) { - $_ = shift(@doc_lines); - last if ($_ eq $SECTIONEND || $_ eq $CHAPTEREND); - push(@$T2H_THIS_SECTION, $_); - } - $previous = $_; - &$T2H_print_section($FH); - - if ($T2H_VERBOSE) - { - $counter++; - print "." if $counter =~ /00$/; - } -} -if ($T2H_SPLIT) -{ - &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter'; - &$T2H_print_page_foot($FH); - close($FH); -} -print "\n" if $T2H_VERBOSE; - -############################################################################# -# Print ToC, Overview, Footnotes -# -undef $T2H_HREF{Prev}; -undef $T2H_HREF{Next}; -undef $T2H_HREF{Back}; -undef $T2H_HREF{Forward}; -undef $T2H_HREF{Up}; - -if (@foot_lines) -{ - print "# writing Footnotes in $docu_foot_file...\n" if $T2H_VERBOSE; - open (FILE, "> $docu_foot_file") || die "$ERROR: Can't open $docu_foot_file for writing: $!\n" - if $T2H_SPLIT; - $T2H_HREF{This} = $docu_foot; - $T2H_NAME{This} = $T2H_WORDS->{$T2H_LANG}->{'Footnotes_Title'}; - $T2H_THIS_SECTION = \@foot_lines; - &$T2H_print_Footnotes(\*FILE); - close(FILE) if $T2H_SPLIT; -} - -if (@toc_lines) -{ - print "# writing Toc in $docu_toc_file...\n" if $T2H_VERBOSE; - open (FILE, "> $docu_toc_file") || die "$ERROR: Can't open $docu_toc_file for writing: $!\n" - if $T2H_SPLIT; - $T2H_HREF{This} = $T2H_HREF{Contents}; - $T2H_NAME{This} = $T2H_NAME{Contents}; - $T2H_THIS_SECTION = \@toc_lines; - &$T2H_print_Toc(\*FILE); - close(FILE) if $T2H_SPLIT; -} - -if (@stoc_lines) -{ - print "# writing Overview in $docu_stoc_file...\n" if $T2H_VERBOSE; - open (FILE, "> $docu_stoc_file") || die "$ERROR: Can't open $docu_stoc_file for writing: $!\n" - if $T2H_SPLIT; - - $T2H_HREF{This} = $T2H_HREF{Overview}; - $T2H_NAME{This} = $T2H_NAME{Overview}; - $T2H_THIS_SECTION = \@stoc_lines; - unshift @$T2H_THIS_SECTION, "

    \n"; - push @$T2H_THIS_SECTION, "\n
    \n"; - &$T2H_print_Overview(\*FILE); - close(FILE) if $T2H_SPLIT; -} - -if ($about_body = &$T2H_about_body()) -{ - print "# writing About in $docu_about_file...\n" if $T2H_VERBOSE; - open (FILE, "> $docu_about_file") || die "$ERROR: Can't open $docu_about_file for writing: $!\n" - if $T2H_SPLIT; - - $T2H_HREF{This} = $T2H_HREF{About}; - $T2H_NAME{This} = $T2H_NAME{About}; - $T2H_THIS_SECTION = [$about_body]; - &$T2H_print_About(\*FILE); - close(FILE) if $T2H_SPLIT; -} - -unless ($T2H_SPLIT) -{ - &$T2H_print_page_foot(\*FILE); - close (FILE); -} - -Finish: -&l2h_FinishFromHtml if ($T2H_L2H); -&l2h_Finish if($T2H_L2H); -print "# that's all folks\n" if $T2H_VERBOSE; - -exit(0); - -#+++############################################################################ -# # -# Low level functions # -# # -#---############################################################################ - -sub LocateIncludeFile -{ - my $file = shift; - my $dir; - - return $file if (-e $file && -r $file); - foreach $dir (@T2H_INCLUDE_DIRS) - { - return "$dir/$file" if (-e "$dir/$file" && -r "$dir/$file"); - } - return undef; -} - -sub clean_name -{ - local ($_); - $_ = &remove_style($_[0]); - &unprotect_texi; - return $_; -} - -sub update_sec_num { - local($name, $level) = @_; - my $ret; - - $level--; # here we start at 0 - if ($name =~ /^appendix/ || defined(@appendix_sec_num)) { - # appendix style - if (defined(@appendix_sec_num)) { - &incr_sec_num($level, @appendix_sec_num); - } else { - @appendix_sec_num = ('A', 0, 0, 0); - } - $ret = join('.', @appendix_sec_num[0..$level]); - } else { - # normal style - if (defined(@normal_sec_num)) - { - &incr_sec_num($level, @normal_sec_num); - } - else - { - @normal_sec_num = (1, 0, 0, 0); - } - $ret = join('.', @normal_sec_num[0..$level]); - } - - $ret .= "." if $level == 0; - return $ret; -} - -sub incr_sec_num { - local($level, $l); - $level = shift(@_); - $_[$level]++; - foreach $l ($level+1 .. 3) { - $_[$l] = 0; - } -} - -sub Sec2UpNode -{ - my $sec = shift; - my $num = $sec2number{$sec}; - - return '' unless $num; - return 'Top' unless $num =~ /\.\d+/; - $num =~ s/\.[^\.]*$//; - $num = $num . '.' unless $num =~ /\./; - return $sec2node{$number2sec{$num}}; -} - -sub Sec2PrevNode -{ - my $sec = shift; - my $num = $sec2number{$sec}; - my ($i, $post); - - if ($num =~ /(\w+)(\.$|$)/) - { - $num = $`; - $i = $1; - $post = $2; - if ($i eq 'A') - { - $i = $normal_sec_num[0]; - } - elsif ($i ne '1') - { - # unfortunately, -- operator is not magical - $i = chr(ord($i) + 1); - } - else - { - return ''; - } - return $sec2node{$number2sec{$num . $i . $post}} - } - return ''; -} - -sub Sec2NextNode -{ - my $sec = shift; - my $num = $sec2number{$sec}; - my $i; - - if ($num =~ /(\w+)(\.$|$)/) - { - $num = $`; - $i = $1; - $post = $2; - if ($post eq '.' && $i eq $normal_sec_num[0]) - { - $i = 'A'; - } - else - { - $i++; - } - return $sec2node{$number2sec{$num . $i . $post}} - } - return ''; -} - -sub check { - local($_, %seen, %context, $before, $match, $after); - - while (<>) { - if (/\@(\*|\.|\:|\@|\{|\})/) { - $seen{$&}++; - $context{$&} .= "> $_" if $T2H_VERBOSE; - $_ = "$`XX$'"; - redo; - } - if (/\@(\w+)/) { - ($before, $match, $after) = ($`, $&, $'); - if ($before =~ /\b[\w-]+$/ && $after =~ /^[\w-.]*\b/) { # e-mail address - $seen{'e-mail address'}++; - $context{'e-mail address'} .= "> $_" if $T2H_VERBOSE; - } else { - $seen{$match}++; - $context{$match} .= "> $_" if $T2H_VERBOSE; - } - $match =~ s/^\@/X/; - $_ = "$before$match$after"; - redo; - } - } - - foreach (sort(keys(%seen))) { - if ($T2H_VERBOSE) { - print "$_\n"; - print $context{$_}; - } else { - print "$_ ($seen{$_})\n"; - } - } -} - -sub open { - local($name) = @_; - - ++$fh_name; - if (open($fh_name, $name)) { - unshift(@fhs, $fh_name); - } else { - warn "$ERROR Can't read file $name: $!\n"; - } -} - -sub init_input { - @fhs = (); # hold the file handles to read - @input_spool = (); # spooled lines to read - $fh_name = 'FH000'; - &open($docu); -} - -sub next_line { - local($fh, $line); - - if (@input_spool) { - $line = shift(@input_spool); - return($line); - } - while (@fhs) { - $fh = $fhs[0]; - $line = <$fh>; - return($line) if $line; - close($fh); - shift(@fhs); - } - return(undef); -} - -# used in pass 1, use &next_line -sub skip_until { - local($tag) = @_; - local($_); - - while ($_ = &next_line) { - return if /^\@end\s+$tag\s*$/; - } - die "* Failed to find '$tag' after: " . $lines[$#lines]; -} - -# used in pass 1 for l2h use &next_line -sub string_until { - local($tag) = @_; - local($_, $string); - - while ($_ = &next_line) { - return $string if /^\@end\s+$tag\s*$/; -# $_ =~ s/hbox/mbox/g; - $string = $string.$_; - } - die "* Failed to find '$tag' after: " . $lines[$#lines]; -} - -# -# HTML stacking to have a better HTML output -# - -sub html_reset { - @html_stack = ('html'); - $html_element = 'body'; -} - -sub html_push { - local($what) = @_; - push(@html_stack, $html_element); - $html_element = $what; -} - -sub html_push_if { - local($what) = @_; - push(@html_stack, $html_element) - if ($html_element && $html_element ne 'P'); - $html_element = $what; -} - -sub html_pop { - $html_element = pop(@html_stack); -} - -sub html_pop_if { - local($elt); - - if (@_) { - foreach $elt (@_) { - if ($elt eq $html_element) { - $html_element = pop(@html_stack) if @html_stack; - last; - } - } - } else { - $html_element = pop(@html_stack) if @html_stack; - } -} - -sub html_debug { - local($what, $line) = @_; - if ($T2H_DEBUG & $DEBUG_HTML) - { - $what = "\n" unless $what; - return("$what") - } - return($what); -} - -# to debug the output... -sub debug { - local($what, $line) = @_; - return("$what") - if $T2H_DEBUG & $DEBUG_HTML; - return($what); -} - -sub SimpleTexi2Html -{ - local $_ = $_[0]; - &protect_texi; - &protect_html; - $_ = substitute_style($_); - $_[0] = $_; -} - -sub normalise_node { - local $_ = $_[0]; - s/\s+/ /g; - s/ $//; - s/^ //; - &protect_texi; - &protect_html; - $_ = substitute_style($_); - $_[0] = $_; -} - -sub menu_entry -{ - my ($node, $name, $descr) = @_; - my ($href, $entry); - - &normalise_node($node); - $href = $node2href{$node}; - if ($href) - { - $descr =~ s/^\s+//; - $descr =~ s/\s*$//; - $descr = SimpleTexi2Html($descr); - if ($T2H_NUMBER_SECTIONS && !$T2H_NODE_NAME_IN_MENU && $node2sec{$node}) - { - $entry = $node2sec{$node}; - $name = ''; - } - else - { - &normalise_node($name); - $entry = ($name && ($name ne $node || ! $T2H_AVOID_MENU_REDUNDANCY) - ? "$name : $node" : $node); - } - - if ($T2H_AVOID_MENU_REDUNDANCY && $descr) - { - my $clean_entry = $entry; - $clean_entry =~ s/^.*? // if ($clean_entry =~ /^([A-Z]|\d+)\.[\d\.]* /); - $clean_entry =~ s/[^\w]//g; - my $clean_descr = $descr; - $clean_descr =~ s/[^\w]//g; - $descr = '' if ($clean_entry eq $clean_descr) - } - push(@lines2,&debug('    \n", __LINE__)); - } - elsif ($node =~ /^\(.*\)\w+/) - { - push(@lines2,&debug('\n", __LINE__)) - } - else - { - warn "$ERROR Undefined node of menu_entry ($node): $_"; - } -} - -sub do_ctrl { "^$_[0]" } - -sub do_email { - local($addr, $text) = split(/,\s*/, $_[0]); - - $text = $addr unless $text; - &t2h_anchor('', "mailto:$addr", $text); -} - -sub do_sc -{ - # l2h does this much better - return &l2h_ToLatex("{\\sc ".&unprotect_html($_[0])."}") if ($T2H_L2H); - return "\U$_[0]\E"; -} - -sub do_math -{ - return &l2h_ToLatex("\$".&unprotect_html($_[0])."\$") if ($T2H_L2H); - return "".$text.""; -} - -sub do_uref { - local($url, $text, $only_text) = split(/,\s*/, $_[0]); - - $text = $only_text if $only_text; - $text = $url unless $text; - &t2h_anchor('', $url, $text); -} - -sub do_url { &t2h_anchor('', $_[0], $_[0]) } - -sub do_acronym -{ - return '' . $_[0] . ''; -} - -sub do_accent -{ - return "&$_[0]acute;" if $_[1] eq 'H'; - return "$_[0]." if $_[1] eq 'dotaccent'; - return "$_[0]*" if $_[1] eq 'ringaccent'; - return "$_[0]".'[' if $_[1] eq 'tieaccent'; - return "$_[0]".'(' if $_[1] eq 'u'; - return "$_[0]_" if $_[1] eq 'ubaraccent'; - return ".$_[0]" if $_[1] eq 'udotaccent'; - return "$_[0]<" if $_[1] eq 'v'; - return "&$_[0]cedil;" if $_[1] eq ','; - return "$_[0]" if $_[1] eq 'dotless'; - return undef; -} - -sub apply_style { - local($texi_style, $text) = @_; - local($style); - - $style = $style_map{$texi_style}; - if (defined($style)) { # known style - if ($style =~ /^\"/) { # add quotes - $style = $'; - $text = "\`$text\'"; - } - if ($style =~ /^\&/) { # custom - $style = $'; - $text = &$style($text, $texi_style); - } elsif ($style) { # good style - $text = "<$style>$text"; - } else { # no style - } - } else { # unknown style - $text = undef; - } - return($text); -} - -# remove Texinfo styles -sub remove_style { - local($_) = @_; - 1 while(s/\@\w+{([^\{\}]+)}/$1/g); - return($_); -} - -sub remove_things -{ - local ($_) = @_; - s|\@(\w+)\{\}|$1|g; - return $_; -} - -sub substitute_style { - local($_) = @_; - local($changed, $done, $style, $text); - - &simple_substitutions; - $changed = 1; - while ($changed) { - $changed = 0; - $done = ''; - while (/\@(\w+){([^\{\}]+)}/ || /\@(,){([^\{\}]+)}/) { - $text = &apply_style($1, $2); - if ($text) { - $_ = "$`$text$'"; - $changed = 1; - } else { - $done .= "$`\@$1"; - $_ = "{$2}$'"; - } - } - $_ = $done . $_; - } - return($_); -} - -sub t2h_anchor { - local($name, $href, $text, $newline, $extra_attribs) = @_; - local($result); - - $result = " - $what =~ s/\&/\&\#38;/g; - $what =~ s/\/\&\#62;/g; - # restore anything in quotes - # this fixes my problem where I had: - # < IMG SRC="leftarrow.gif" ALT="<--" > but what if I wanted < in my ALT text ?? - # maybe byte stuffing or some other technique should be used. - $what =~ s/\"([^\&]+)\&\#60;(.*)\"/"$1<$2"/g; - $what =~ s/\"([^\&]+)\&\#62;(.*)\"/"$1>$2"/g; - $what =~ s/\"([^\&]+)\&\#38;(.*)\"/"$1&$2"/g; - # but recognize some HTML things - $what =~ s/\&\#60;\/A\&\#62;/<\/A>/g; # - $what =~ s/\&\#60;A ([^\&]+)\&\#62;//g; # - $what =~ s/\&\#60;IMG ([^\&]+)\&\#62;//g; # - return($what); -} - -sub unprotect_texi { - s/$;0/\@/go; - s/$;1/\{/go; - s/$;2/\}/go; - s/$;3/\`/go; - s/$;4/\'/go; -} - -sub Unprotect_texi -{ - local $_ = shift; - &unprotect_texi; - return($_); -} - -sub unprotect_html { - local($what) = @_; - $what =~ s/\&\#38;/\&/g; - $what =~ s/\&\#60;/\/g; - return($what); -} - -sub t2h_print_label -{ - my $fh = shift; - my $href = shift || $T2H_HREF{This}; - $href =~ s/.*#(.*)$/$1/; - print $fh qq{\n}; -} - -############################################################################## - - # These next few lines are legal in both Perl and nroff. - -.00 ; # finish .ig - -'di \" finish diversion--previous line must be blank -.nr nl 0-1 \" fake up transition to first page again -.nr % 0 \" start at page 1 -'; __END__ ############# From here on it's a standard manual page ############ -.so /usr/local/man/man1/texi2html.1 diff --git a/readline/doc/version.texi b/readline/doc/version.texi deleted file mode 100644 index 576c35c839..0000000000 --- a/readline/doc/version.texi +++ /dev/null @@ -1,10 +0,0 @@ -@ignore -Copyright (C) 1988-2018 Free Software Foundation, Inc. -@end ignore - -@set EDITION 8.0 -@set VERSION 8.0 -@set UPDATED 30 November 2018 -@set UPDATED-MONTH November 2018 - -@set LASTCHANGE Fri Nov 30 22:50:53 EST 2018 diff --git a/readline/emacs_keymap.c b/readline/emacs_keymap.c deleted file mode 100644 index b5e53f494a..0000000000 --- a/readline/emacs_keymap.c +++ /dev/null @@ -1,872 +0,0 @@ -/* emacs_keymap.c -- the keymap for emacs_mode in readline (). */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (BUFSIZ) -#include -#endif /* !BUFSIZ */ - -#include "readline.h" - -/* An array of function pointers, one for each possible key. - If the type byte is ISKMAP, then the pointer is the address of - a keymap. */ - -KEYMAP_ENTRY_ARRAY emacs_standard_keymap = { - - /* Control keys. */ - { ISFUNC, rl_set_mark }, /* Control-@ */ - { ISFUNC, rl_beg_of_line }, /* Control-a */ - { ISFUNC, rl_backward_char }, /* Control-b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ - { ISFUNC, rl_delete }, /* Control-d */ - { ISFUNC, rl_end_of_line }, /* Control-e */ - { ISFUNC, rl_forward_char }, /* Control-f */ - { ISFUNC, rl_abort }, /* Control-g */ - { ISFUNC, rl_rubout }, /* Control-h */ - { ISFUNC, rl_complete }, /* Control-i */ - { ISFUNC, rl_newline }, /* Control-j */ - { ISFUNC, rl_kill_line }, /* Control-k */ - { ISFUNC, rl_clear_screen }, /* Control-l */ - { ISFUNC, rl_newline }, /* Control-m */ - { ISFUNC, rl_get_next_history }, /* Control-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ - { ISFUNC, rl_get_previous_history }, /* Control-p */ - { ISFUNC, rl_quoted_insert }, /* Control-q */ - { ISFUNC, rl_reverse_search_history }, /* Control-r */ - { ISFUNC, rl_forward_search_history }, /* Control-s */ - { ISFUNC, rl_transpose_chars }, /* Control-t */ - { ISFUNC, rl_unix_line_discard }, /* Control-u */ - { ISFUNC, rl_quoted_insert }, /* Control-v */ - { ISFUNC, rl_unix_word_rubout }, /* Control-w */ - { ISKMAP, (rl_command_func_t *)emacs_ctlx_keymap }, /* Control-x */ - { ISFUNC, rl_yank }, /* Control-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ - { ISKMAP, (rl_command_func_t *)emacs_meta_keymap }, /* Control-[ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ - { ISFUNC, rl_char_search }, /* Control-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ - { ISFUNC, rl_undo_command }, /* Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, rl_insert }, /* SPACE */ - { ISFUNC, rl_insert }, /* ! */ - { ISFUNC, rl_insert }, /* " */ - { ISFUNC, rl_insert }, /* # */ - { ISFUNC, rl_insert }, /* $ */ - { ISFUNC, rl_insert }, /* % */ - { ISFUNC, rl_insert }, /* & */ - { ISFUNC, rl_insert }, /* ' */ - { ISFUNC, rl_insert }, /* ( */ - { ISFUNC, rl_insert }, /* ) */ - { ISFUNC, rl_insert }, /* * */ - { ISFUNC, rl_insert }, /* + */ - { ISFUNC, rl_insert }, /* , */ - { ISFUNC, rl_insert }, /* - */ - { ISFUNC, rl_insert }, /* . */ - { ISFUNC, rl_insert }, /* / */ - - /* Regular digits. */ - { ISFUNC, rl_insert }, /* 0 */ - { ISFUNC, rl_insert }, /* 1 */ - { ISFUNC, rl_insert }, /* 2 */ - { ISFUNC, rl_insert }, /* 3 */ - { ISFUNC, rl_insert }, /* 4 */ - { ISFUNC, rl_insert }, /* 5 */ - { ISFUNC, rl_insert }, /* 6 */ - { ISFUNC, rl_insert }, /* 7 */ - { ISFUNC, rl_insert }, /* 8 */ - { ISFUNC, rl_insert }, /* 9 */ - - /* A little more punctuation. */ - { ISFUNC, rl_insert }, /* : */ - { ISFUNC, rl_insert }, /* ; */ - { ISFUNC, rl_insert }, /* < */ - { ISFUNC, rl_insert }, /* = */ - { ISFUNC, rl_insert }, /* > */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* @ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_insert }, /* A */ - { ISFUNC, rl_insert }, /* B */ - { ISFUNC, rl_insert }, /* C */ - { ISFUNC, rl_insert }, /* D */ - { ISFUNC, rl_insert }, /* E */ - { ISFUNC, rl_insert }, /* F */ - { ISFUNC, rl_insert }, /* G */ - { ISFUNC, rl_insert }, /* H */ - { ISFUNC, rl_insert }, /* I */ - { ISFUNC, rl_insert }, /* J */ - { ISFUNC, rl_insert }, /* K */ - { ISFUNC, rl_insert }, /* L */ - { ISFUNC, rl_insert }, /* M */ - { ISFUNC, rl_insert }, /* N */ - { ISFUNC, rl_insert }, /* O */ - { ISFUNC, rl_insert }, /* P */ - { ISFUNC, rl_insert }, /* Q */ - { ISFUNC, rl_insert }, /* R */ - { ISFUNC, rl_insert }, /* S */ - { ISFUNC, rl_insert }, /* T */ - { ISFUNC, rl_insert }, /* U */ - { ISFUNC, rl_insert }, /* V */ - { ISFUNC, rl_insert }, /* W */ - { ISFUNC, rl_insert }, /* X */ - { ISFUNC, rl_insert }, /* Y */ - { ISFUNC, rl_insert }, /* Z */ - - /* Some more punctuation. */ - { ISFUNC, rl_insert }, /* [ */ - { ISFUNC, rl_insert }, /* \ */ - { ISFUNC, rl_insert }, /* ] */ - { ISFUNC, rl_insert }, /* ^ */ - { ISFUNC, rl_insert }, /* _ */ - { ISFUNC, rl_insert }, /* ` */ - - /* Lowercase alphabet. */ - { ISFUNC, rl_insert }, /* a */ - { ISFUNC, rl_insert }, /* b */ - { ISFUNC, rl_insert }, /* c */ - { ISFUNC, rl_insert }, /* d */ - { ISFUNC, rl_insert }, /* e */ - { ISFUNC, rl_insert }, /* f */ - { ISFUNC, rl_insert }, /* g */ - { ISFUNC, rl_insert }, /* h */ - { ISFUNC, rl_insert }, /* i */ - { ISFUNC, rl_insert }, /* j */ - { ISFUNC, rl_insert }, /* k */ - { ISFUNC, rl_insert }, /* l */ - { ISFUNC, rl_insert }, /* m */ - { ISFUNC, rl_insert }, /* n */ - { ISFUNC, rl_insert }, /* o */ - { ISFUNC, rl_insert }, /* p */ - { ISFUNC, rl_insert }, /* q */ - { ISFUNC, rl_insert }, /* r */ - { ISFUNC, rl_insert }, /* s */ - { ISFUNC, rl_insert }, /* t */ - { ISFUNC, rl_insert }, /* u */ - { ISFUNC, rl_insert }, /* v */ - { ISFUNC, rl_insert }, /* w */ - { ISFUNC, rl_insert }, /* x */ - { ISFUNC, rl_insert }, /* y */ - { ISFUNC, rl_insert }, /* z */ - - /* Final punctuation. */ - { ISFUNC, rl_insert }, /* { */ - { ISFUNC, rl_insert }, /* | */ - { ISFUNC, rl_insert }, /* } */ - { ISFUNC, rl_insert }, /* ~ */ - { ISFUNC, rl_rubout }, /* RUBOUT */ - -#if KEYMAP_SIZE > 128 - /* Pure 8-bit characters (128 - 159). - These might be used in some - character sets. */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - - /* ISO Latin-1 characters (160 - 255) */ - { ISFUNC, rl_insert }, /* No-break space */ - { ISFUNC, rl_insert }, /* Inverted exclamation mark */ - { ISFUNC, rl_insert }, /* Cent sign */ - { ISFUNC, rl_insert }, /* Pound sign */ - { ISFUNC, rl_insert }, /* Currency sign */ - { ISFUNC, rl_insert }, /* Yen sign */ - { ISFUNC, rl_insert }, /* Broken bar */ - { ISFUNC, rl_insert }, /* Section sign */ - { ISFUNC, rl_insert }, /* Diaeresis */ - { ISFUNC, rl_insert }, /* Copyright sign */ - { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ - { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ - { ISFUNC, rl_insert }, /* Not sign */ - { ISFUNC, rl_insert }, /* Soft hyphen */ - { ISFUNC, rl_insert }, /* Registered sign */ - { ISFUNC, rl_insert }, /* Macron */ - { ISFUNC, rl_insert }, /* Degree sign */ - { ISFUNC, rl_insert }, /* Plus-minus sign */ - { ISFUNC, rl_insert }, /* Superscript two */ - { ISFUNC, rl_insert }, /* Superscript three */ - { ISFUNC, rl_insert }, /* Acute accent */ - { ISFUNC, rl_insert }, /* Micro sign */ - { ISFUNC, rl_insert }, /* Pilcrow sign */ - { ISFUNC, rl_insert }, /* Middle dot */ - { ISFUNC, rl_insert }, /* Cedilla */ - { ISFUNC, rl_insert }, /* Superscript one */ - { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ - { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ - { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ - { ISFUNC, rl_insert }, /* Vulgar fraction one half */ - { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ - { ISFUNC, rl_insert }, /* Inverted questionk mark */ - { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ - { ISFUNC, rl_insert }, /* Latin capital letter ae */ - { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ - { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ - { ISFUNC, rl_insert }, /* Multiplication sign */ - { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ - { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ - { ISFUNC, rl_insert }, /* Latin small letter a with grave */ - { ISFUNC, rl_insert }, /* Latin small letter a with acute */ - { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ - { ISFUNC, rl_insert }, /* Latin small letter ae */ - { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ - { ISFUNC, rl_insert }, /* Latin small letter e with grave */ - { ISFUNC, rl_insert }, /* Latin small letter e with acute */ - { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter i with grave */ - { ISFUNC, rl_insert }, /* Latin small letter i with acute */ - { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter o with grave */ - { ISFUNC, rl_insert }, /* Latin small letter o with acute */ - { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ - { ISFUNC, rl_insert }, /* Division sign */ - { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ - { ISFUNC, rl_insert }, /* Latin small letter u with grave */ - { ISFUNC, rl_insert }, /* Latin small letter u with acute */ - { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter y with acute */ - { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ - { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ -#endif /* KEYMAP_SIZE > 128 */ -}; - -KEYMAP_ENTRY_ARRAY emacs_meta_keymap = { - - /* Meta keys. Just like above, but the high bit is set. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-@ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-c */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-d */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-f */ - { ISFUNC, rl_abort }, /* Meta-Control-g */ - { ISFUNC, rl_backward_kill_word }, /* Meta-Control-h */ - { ISFUNC, rl_tab_insert }, /* Meta-Control-i */ - { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-j */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-k */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-l */ - { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-m */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-o */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-q */ - { ISFUNC, rl_revert_line }, /* Meta-Control-r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-s */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-t */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-x */ - { ISFUNC, rl_yank_nth_arg }, /* Meta-Control-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-z */ - - { ISFUNC, rl_complete }, /* Meta-Control-[ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-\ */ - { ISFUNC, rl_backward_char_search }, /* Meta-Control-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-^ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, rl_set_mark }, /* Meta-SPACE */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-! */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-" */ - { ISFUNC, rl_insert_comment }, /* Meta-# */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-$ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-% */ - { ISFUNC, rl_tilde_expand }, /* Meta-& */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-' */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-( */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-) */ - { ISFUNC, rl_insert_completions }, /* Meta-* */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-+ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-, */ - { ISFUNC, rl_digit_argument }, /* Meta-- */ - { ISFUNC, rl_yank_last_arg}, /* Meta-. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-/ */ - - /* Regular digits. */ - { ISFUNC, rl_digit_argument }, /* Meta-0 */ - { ISFUNC, rl_digit_argument }, /* Meta-1 */ - { ISFUNC, rl_digit_argument }, /* Meta-2 */ - { ISFUNC, rl_digit_argument }, /* Meta-3 */ - { ISFUNC, rl_digit_argument }, /* Meta-4 */ - { ISFUNC, rl_digit_argument }, /* Meta-5 */ - { ISFUNC, rl_digit_argument }, /* Meta-6 */ - { ISFUNC, rl_digit_argument }, /* Meta-7 */ - { ISFUNC, rl_digit_argument }, /* Meta-8 */ - { ISFUNC, rl_digit_argument }, /* Meta-9 */ - - /* A little more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-: */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-; */ - { ISFUNC, rl_beginning_of_history }, /* Meta-< */ - { ISFUNC, rl_possible_completions }, /* Meta-= */ - { ISFUNC, rl_end_of_history }, /* Meta-> */ - { ISFUNC, rl_possible_completions }, /* Meta-? */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-@ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-A */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-B */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-C */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-D */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-E */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-F */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-G */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-H */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-I */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-J */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-K */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-L */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-M */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-N */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-O */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-P */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-Q */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-R */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-S */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-T */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-U */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-V */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-W */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-X */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-Y */ - { ISFUNC, rl_do_lowercase_version }, /* Meta-Z */ - - /* Some more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-[ */ /* was rl_arrow_keys */ - { ISFUNC, rl_delete_horizontal_space }, /* Meta-\ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-^ */ - { ISFUNC, rl_yank_last_arg }, /* Meta-_ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-` */ - - /* Lowercase alphabet. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-a */ - { ISFUNC, rl_backward_word }, /* Meta-b */ - { ISFUNC, rl_capitalize_word }, /* Meta-c */ - { ISFUNC, rl_kill_word }, /* Meta-d */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-e */ - { ISFUNC, rl_forward_word }, /* Meta-f */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-g */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-h */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-i */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-j */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-k */ - { ISFUNC, rl_downcase_word }, /* Meta-l */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-m */ - { ISFUNC, rl_noninc_forward_search }, /* Meta-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-o */ /* was rl_arrow_keys */ - { ISFUNC, rl_noninc_reverse_search }, /* Meta-p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-q */ - { ISFUNC, rl_revert_line }, /* Meta-r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-s */ - { ISFUNC, rl_transpose_words }, /* Meta-t */ - { ISFUNC, rl_upcase_word }, /* Meta-u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-x */ - { ISFUNC, rl_yank_pop }, /* Meta-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-z */ - - /* Final punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-{ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-| */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-} */ - { ISFUNC, rl_tilde_expand }, /* Meta-~ */ - { ISFUNC, rl_backward_kill_word }, /* Meta-rubout */ - -#if KEYMAP_SIZE > 128 - /* Undefined keys. */ - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 } -#endif /* KEYMAP_SIZE > 128 */ -}; - -KEYMAP_ENTRY_ARRAY emacs_ctlx_keymap = { - - /* Control keys. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-d */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ - { ISFUNC, rl_abort }, /* Control-g */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-h */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-i */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-j */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-k */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-l */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-m */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-q */ - { ISFUNC, rl_re_read_init_file }, /* Control-r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-s */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-t */ - { ISFUNC, rl_undo_command }, /* Control-u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-w */ - { ISFUNC, rl_exchange_point_and_mark }, /* Control-x */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-[ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* SPACE */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* # */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* $ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* % */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* & */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ - { ISFUNC, rl_start_kbd_macro }, /* ( */ - { ISFUNC, rl_end_kbd_macro }, /* ) */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* * */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* + */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* , */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* - */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* . */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* / */ - - /* Regular digits. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 0 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 1 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 2 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 3 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 4 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 5 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 6 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 7 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 8 */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* 9 */ - - /* A little more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ; */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* = */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ? */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_do_lowercase_version }, /* A */ - { ISFUNC, rl_do_lowercase_version }, /* B */ - { ISFUNC, rl_do_lowercase_version }, /* C */ - { ISFUNC, rl_do_lowercase_version }, /* D */ - { ISFUNC, rl_do_lowercase_version }, /* E */ - { ISFUNC, rl_do_lowercase_version }, /* F */ - { ISFUNC, rl_do_lowercase_version }, /* G */ - { ISFUNC, rl_do_lowercase_version }, /* H */ - { ISFUNC, rl_do_lowercase_version }, /* I */ - { ISFUNC, rl_do_lowercase_version }, /* J */ - { ISFUNC, rl_do_lowercase_version }, /* K */ - { ISFUNC, rl_do_lowercase_version }, /* L */ - { ISFUNC, rl_do_lowercase_version }, /* M */ - { ISFUNC, rl_do_lowercase_version }, /* N */ - { ISFUNC, rl_do_lowercase_version }, /* O */ - { ISFUNC, rl_do_lowercase_version }, /* P */ - { ISFUNC, rl_do_lowercase_version }, /* Q */ - { ISFUNC, rl_do_lowercase_version }, /* R */ - { ISFUNC, rl_do_lowercase_version }, /* S */ - { ISFUNC, rl_do_lowercase_version }, /* T */ - { ISFUNC, rl_do_lowercase_version }, /* U */ - { ISFUNC, rl_do_lowercase_version }, /* V */ - { ISFUNC, rl_do_lowercase_version }, /* W */ - { ISFUNC, rl_do_lowercase_version }, /* X */ - { ISFUNC, rl_do_lowercase_version }, /* Y */ - { ISFUNC, rl_do_lowercase_version }, /* Z */ - - /* Some more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* [ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* \ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ^ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* _ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ` */ - - /* Lowercase alphabet. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* c */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* d */ - { ISFUNC, rl_call_last_kbd_macro }, /* e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* f */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* h */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* i */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* j */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* k */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* l */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* m */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* o */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* s */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* t */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* x */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ - - /* Final punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* | */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ~ */ - { ISFUNC, rl_backward_kill_line }, /* RUBOUT */ - -#if KEYMAP_SIZE > 128 - /* Undefined keys. */ - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 } -#endif /* KEYMAP_SIZE > 128 */ -}; diff --git a/readline/examples/ChangeLog.gdb b/readline/examples/ChangeLog.gdb deleted file mode 100644 index 3be43f9cdb..0000000000 --- a/readline/examples/ChangeLog.gdb +++ /dev/null @@ -1,18 +0,0 @@ -2011-05-11 Jan Kratochvil - - Imported readline 6.2, and upstream patch 001. - -2006-04-24 Daniel Jacobowitz - - Imported readline 5.1, and upstream patches 001-004. - -2002-02-24 Elena Zannoni - - * ChangeLog.gdb: Rename from ChangeLog.Cygnus. - -2000-07-09 Elena Zannoni - - * Import of readline 4.1. - - New files: excallback.c, rlfe.c. - diff --git a/readline/examples/Inputrc b/readline/examples/Inputrc deleted file mode 100644 index a358bc476d..0000000000 --- a/readline/examples/Inputrc +++ /dev/null @@ -1,81 +0,0 @@ -# My ~/.inputrc file is in -*- text -*- for easy editing with Emacs. -# -# Notice the various bindings which are conditionalized depending -# on which program is running, or what terminal is active. -# - -# Copyright (C) 1989-2009 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -# In all programs, all terminals, make sure this is bound. -"\C-x\C-r": re-read-init-file - -# Hp terminals (and some others) have ugly default behaviour for C-h. -"\C-h": backward-delete-char -"\e\C-h": backward-kill-word -"\C-xd": dump-functions - -# In xterm windows, make the arrow keys do the right thing. -$if TERM=xterm -"\e[A": previous-history -"\e[B": next-history -"\e[C": forward-char -"\e[D": backward-char - -# alternate arrow key prefix -"\eOA": previous-history -"\eOB": next-history -"\eOC": forward-char -"\eOD": backward-char - -# Under Xterm in Bash, we bind local Function keys to do something useful. -$if Bash -"\e[11~": "Function Key 1" -"\e[12~": "Function Key 2" -"\e[13~": "Function Key 3" -"\e[14~": "Function Key 4" -"\e[15~": "Function Key 5" - -# I know the following escape sequence numbers are 1 greater than -# the function key. Don't ask me why, I didn't design the xterm terminal. -"\e[17~": "Function Key 6" -"\e[18~": "Function Key 7" -"\e[19~": "Function Key 8" -"\e[20~": "Function Key 9" -"\e[21~": "Function Key 10" -$endif -$endif - -# For Bash, all terminals, add some Bash specific hacks. -$if Bash -"\C-xv": show-bash-version -"\C-x\C-e": shell-expand-line - -# Here is one for editing my path. -"\C-xp": "$PATH\C-x\C-e\C-e\"\C-aPATH=\":\C-b" - -# Make C-x r read my mail in emacs. -# "\C-xr": "emacs -f rmail\C-j" -$endif - -# For FTP, different hacks: -$if Ftp -"\C-xg": "get \M-?" -"\C-xt": "put \M-?" -"\M-.": yank-last-arg -$endif - -" ": self-insert diff --git a/readline/examples/Makefile.in b/readline/examples/Makefile.in deleted file mode 100644 index 4a7c39e0a4..0000000000 --- a/readline/examples/Makefile.in +++ /dev/null @@ -1,188 +0,0 @@ -# -# This is the Makefile for the readline examples subdirectory. -# -# Copyright (C) 1994,2008,2009 Free Software Foundation, Inc. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -RL_LIBRARY_VERSION = @LIBVERSION@ - -SHELL = @MAKE_SHELL@ -RM = rm -f - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -datarootdir = @datarootdir@ - -bindir = @bindir@ -srcdir = @srcdir@ -datadir = @datadir@ -VPATH = @srcdir@ -top_srcdir = @top_srcdir@ -#BUILD_DIR = . -BUILD_DIR = @BUILD_DIR@ -installdir = $(datadir)/readline - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ - -# Support an alternate destination root directory for package building -DESTDIR = - -DEFS = @DEFS@ -CC = @CC@ -CFLAGS = @CFLAGS@ -LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DREADLINE_LIBRARY -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' -CPPFLAGS = @CPPFLAGS@ - -INCLUDES = -I$(srcdir) -I$(top_srcdir) -I.. - -CCFLAGS = $(ASAN_CFLAGS) $(DEFS) $(LOCAL_CFLAGS) $(INCLUDES) $(CPPFLAGS) \ - $(CFLAGS) -LDFLAGS = -g -L.. @LDFLAGS@ $(ASAN_LDFLAGS) - -ASAN_XCFLAGS = -fsanitize=address -fno-omit-frame-pointer -ASAN_XLDFLAGS = -fsanitize=address - -READLINE_LIB = ../libreadline.a -HISTORY_LIB = ../libhistory.a - -TERMCAP_LIB = @TERMCAP_LIB@ - -.c.o: - ${RM} $@ - $(CC) $(CCFLAGS) -c $< - -SOURCES = excallback.c fileman.c histexamp.c manexamp.c rl-fgets.c rl.c \ - rlbasic.c rlcat.c rlevent.c rlptytest.c rltest.c rlversion.c \ - rltest2.c rl-callbacktest.c hist_erasedups.c hist_purgecmd.c \ - rlkeymaps.c - -EXECUTABLES = fileman$(EXEEXT) rltest$(EXEEXT) rl$(EXEEXT) rlcat$(EXEEXT) \ - rlevent$(EXEEXT) rlversion$(EXEEXT) histexamp$(EXEEXT) \ - rl-callbacktest$(EXEEXT) rlbasic$(EXEEXT) \ - hist_erasedups$(EXEEXT) hist_purgecmd$(EXEEXT) \ - rlkeymaps$(EXEEXT) - -OBJECTS = fileman.o rltest.o rl.o rlevent.o rlcat.o rlversion.o histexamp.o \ - rltest2.o rl-callbacktest.o rlbasic.o hist_erasedups.o hist_purgecmd.o \ - rlkeymaps.o - -OTHEREXE = rlptytest$(EXEEXT) -OTHEROBJ = rlptytest.o - -all: $(EXECUTABLES) -everything: all - -asan: - ${MAKE} ${MFLAGS} ASAN_CFLAGS='${ASAN_XCFLAGS}' ASAN_LDFLAGS='${ASAN_XLDFLAGS}' all - -check: rlversion$(EXEEXT) - @echo Readline version: `rlversion$(EXEEXT)` - -installdirs: - -$(SHELL) $(top_srcdir)/support/mkdirs $(DESTDIR)$(installdir) - -install: installdirs - @for f in $(SOURCES); do \ - $(RM) $(DESTDIR)$(installdir)/$$f ; \ - $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(installdir) ; \ - done - -uninstall: - @for f in $(SOURCES); do \ - $(RM) $(DESTDIR)$(installdir)/$$f ; \ - done - -rmdir $(DESTDIR)$(installdir) - -rl$(EXEEXT): rl.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rl.o $(READLINE_LIB) $(TERMCAP_LIB) - -rlbasic$(EXEEXT): rlbasic.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlbasic.o $(READLINE_LIB) $(TERMCAP_LIB) - -rlcat$(EXEEXT): rlcat.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlcat.o $(READLINE_LIB) $(TERMCAP_LIB) - -rlevent$(EXEEXT): rlevent.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlevent.o $(READLINE_LIB) $(TERMCAP_LIB) - -rlkeymaps$(EXEEXT): rlkeymaps.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlkeymaps.o $(READLINE_LIB) $(TERMCAP_LIB) - -fileman$(EXEEXT): fileman.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ fileman.o $(READLINE_LIB) $(TERMCAP_LIB) - -rltest$(EXEEXT): rltest.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rltest.o $(READLINE_LIB) $(TERMCAP_LIB) - -rltest2$(EXEEXT): rltest2.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rltest2.o $(READLINE_LIB) $(TERMCAP_LIB) - -rl-callbacktest$(EXEEXT): rl-callbacktest.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rl-callbacktest.o $(READLINE_LIB) $(TERMCAP_LIB) - -rlptytest$(EXEEXT): rlptytest.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlptytest.o $(READLINE_LIB) $(TERMCAP_LIB) $(LIBUTIL) - -rlversion$(EXEEXT): rlversion.o $(READLINE_LIB) - $(CC) $(LDFLAGS) -o $@ rlversion.o $(READLINE_LIB) $(TERMCAP_LIB) - -histexamp$(EXEEXT): histexamp.o $(HISTORY_LIB) - $(CC) $(LDFLAGS) -o $@ histexamp.o -lhistory $(TERMCAP_LIB) - -hist_erasedups$(EXEEXT): hist_erasedups.o $(HISTORY_LIB) - $(CC) $(LDFLAGS) -o $@ hist_erasedups.o -lhistory $(TERMCAP_LIB) - -hist_purgecmd$(EXEEXT): hist_purgecmd.o $(HISTORY_LIB) - $(CC) $(LDFLAGS) -o $@ hist_purgecmd.o -lhistory $(TERMCAP_LIB) - -clean mostlyclean: - $(RM) $(OBJECTS) $(OTHEROBJ) - $(RM) $(EXECUTABLES) $(OTHEREXE) *.exe - -distclean maintainer-clean: clean - $(RM) Makefile - -fileman.o: fileman.c -rltest.o: rltest.c -rltest2.o: rltest2.c -rl.o: rl.c -rlversion.o: rlversion.c -histexamp.o: histexamp.c -hist_erasedups.o: hist_erasedups.c -hist_purgecmd.o: hist_purgecmd.c -rlbasic.o: rlbasic.c -rlkeymaps.o: rlkeymaps.c -rlcat.o: rlcat.c -rlptytest.o: rlptytest.c -rl-callbacktest.o: rl-callbacktest.c - -fileman.o: $(top_srcdir)/readline.h -rltest.o: $(top_srcdir)/readline.h -rltest2.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h -rl.o: $(top_srcdir)/readline.h -rlversion.o: $(top_srcdir)/readline.h -histexamp.o: $(top_srcdir)/history.h -hist_erasedups.o: $(top_srcdir)/history.h -hist_purgecmd.o: $(top_srcdir)/history.h -rlbasic.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h -rlcat.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h -rlptytest.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h -rl-callbacktest.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h diff --git a/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP b/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP deleted file mode 100644 index 5e895513c3..0000000000 --- a/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP +++ /dev/null @@ -1,40 +0,0 @@ -AC_DEFUN([BASH_CHECK_LIB_TERMCAP], -[ -if test "X$bash_cv_termcap_lib" = "X"; then -_bash_needmsg=yes -else -AC_MSG_CHECKING(which library has the termcap functions) -_bash_needmsg= -fi -AC_CACHE_VAL(bash_cv_termcap_lib, -[AC_CHECK_FUNC(tgetent, bash_cv_termcap_lib=libc, - [AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap, - [AC_CHECK_LIB(tinfo, tgetent, bash_cv_termcap_lib=libtinfo, - [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses, - [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses, - bash_cv_termcap_lib=gnutermcap)])])])])]) -if test "X$_bash_needmsg" = "Xyes"; then -AC_MSG_CHECKING(which library has the termcap functions) -fi -AC_MSG_RESULT(using $bash_cv_termcap_lib) -if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then -LDFLAGS="$LDFLAGS -L./lib/termcap" -TERMCAP_LIB="./lib/termcap/libtermcap.a" -TERMCAP_DEP="./lib/termcap/libtermcap.a" -elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then -TERMCAP_LIB=-ltermcap -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libtinfo; then -TERMCAP_LIB=-ltinfo -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libncurses; then -TERMCAP_LIB=-lncurses -TERMCAP_DEP= -elif test $bash_cv_termcap_lib = libc; then -TERMCAP_LIB= -TERMCAP_DEP= -else -TERMCAP_LIB=-lcurses -TERMCAP_DEP= -fi -]) diff --git a/readline/examples/autoconf/RL_LIB_READLINE_VERSION b/readline/examples/autoconf/RL_LIB_READLINE_VERSION deleted file mode 100644 index 883942c4b3..0000000000 --- a/readline/examples/autoconf/RL_LIB_READLINE_VERSION +++ /dev/null @@ -1,118 +0,0 @@ -dnl need: prefix exec_prefix libdir includedir CC TERMCAP_LIB -dnl require: -dnl AC_PROG_CC -dnl BASH_CHECK_LIB_TERMCAP - -AC_DEFUN([RL_LIB_READLINE_VERSION], -[ -AC_REQUIRE([BASH_CHECK_LIB_TERMCAP]) - -AC_MSG_CHECKING([version of installed readline library]) - -# What a pain in the ass this is. - -# save cpp and ld options -_save_CFLAGS="$CFLAGS" -_save_LDFLAGS="$LDFLAGS" -_save_LIBS="$LIBS" - -# Don't set ac_cv_rl_prefix if the caller has already assigned a value. This -# allows the caller to do something like $_rl_prefix=$withval if the user -# specifies --with-installed-readline=PREFIX as an argument to configure - -if test -z "$ac_cv_rl_prefix"; then -test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix} -fi - -eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include -eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib - -LIBS="$LIBS -lreadline ${TERMCAP_LIB}" -CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}" -LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}" - -AC_CACHE_VAL(ac_cv_rl_version, -[AC_TRY_RUN([ -#include -#include - -extern int rl_gnu_readline_p; - -main() -{ - FILE *fp; - fp = fopen("conftest.rlv", "w"); - if (fp == 0) - exit(1); - if (rl_gnu_readline_p != 1) - fprintf(fp, "0.0\n"); - else - fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0"); - fclose(fp); - exit(0); -} -], -ac_cv_rl_version=`cat conftest.rlv`, -ac_cv_rl_version='0.0', -ac_cv_rl_version='4.2')]) - -CFLAGS="$_save_CFLAGS" -LDFLAGS="$_save_LDFLAGS" -LIBS="$_save_LIBS" - -RL_MAJOR=0 -RL_MINOR=0 - -# ( -case "$ac_cv_rl_version" in -2*|3*|4*|5*|6*|7*|8*|9*) - RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'` - RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[[a-zA-Z]]*$::'` - ;; -esac - -# ((( -case $RL_MAJOR in -[[0-9][0-9]]) _RL_MAJOR=$RL_MAJOR ;; -[[0-9]]) _RL_MAJOR=0$RL_MAJOR ;; -*) _RL_MAJOR=00 ;; -esac - -# ((( -case $RL_MINOR in -[[0-9][0-9]]) _RL_MINOR=$RL_MINOR ;; -[[0-9]]) _RL_MINOR=0$RL_MINOR ;; -*) _RL_MINOR=00 ;; -esac - -RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}" - -# Readline versions greater than 4.2 have these defines in readline.h - -if test $ac_cv_rl_version = '0.0' ; then - AC_MSG_WARN([Could not test version of installed readline library.]) -elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then - # set these for use by the caller - RL_PREFIX=$ac_cv_rl_prefix - RL_LIBDIR=$ac_cv_rl_libdir - RL_INCLUDEDIR=$ac_cv_rl_includedir - AC_MSG_RESULT($ac_cv_rl_version) -else - -AC_DEFINE_UNQUOTED(RL_READLINE_VERSION, $RL_VERSION, [encoded version of the installed readline library]) -AC_DEFINE_UNQUOTED(RL_VERSION_MAJOR, $RL_MAJOR, [major version of installed readline library]) -AC_DEFINE_UNQUOTED(RL_VERSION_MINOR, $RL_MINOR, [minor version of installed readline library]) - -AC_SUBST(RL_VERSION) -AC_SUBST(RL_MAJOR) -AC_SUBST(RL_MINOR) - -# set these for use by the caller -RL_PREFIX=$ac_cv_rl_prefix -RL_LIBDIR=$ac_cv_rl_libdir -RL_INCLUDEDIR=$ac_cv_rl_includedir - -AC_MSG_RESULT($ac_cv_rl_version) - -fi -]) diff --git a/readline/examples/autoconf/wi_LIB_READLINE b/readline/examples/autoconf/wi_LIB_READLINE deleted file mode 100644 index c7383220b9..0000000000 --- a/readline/examples/autoconf/wi_LIB_READLINE +++ /dev/null @@ -1,76 +0,0 @@ -dnl Borut Razem -dnl -dnl This macro checks for the presence of the readline library. -dnl It works also in cross-compilation environment. -dnl -dnl To get it into the aclocal.m4 dnl file, do this: -dnl aclocal -I . --verbose -dnl -dnl The --verbose will show all of the files that are searched -dnl for .m4 macros. - -AC_DEFUN([wi_LIB_READLINE], [ - dnl check for the readline.h header file - - AC_CHECK_HEADER(readline/readline.h) - - if test "$ac_cv_header_readline_readline_h" = yes; then - dnl check the readline version - - cat > conftest.$ac_ext < -#include -wi_LIB_READLINE_VERSION RL_VERSION_MAJOR RL_VERSION_MINOR -EOF - - wi_READLINE_VERSION=$($CPP $CPPFLAGS conftest.$ac_ext | sed -n -e "s/^wi_LIB_READLINE_VERSION *\([[0-9\]][[0-9\]]*\) *\([[0-9\]][[0-9\]]*\)$/\1.\2/p") - rm -rf conftest* - - if test -n "$wi_READLINE_VERSION"; then - wi_MAJOR=$(expr $wi_READLINE_VERSION : '\([[0-9]][[0-9]]*\)\.') - wi_MINOR=$(expr $wi_READLINE_VERSION : '[[0-9]][[0-9]]*\.\([[0-9]][[0-9]]*$\)') - if test $wi_MINOR -lt 10; then - wi_MINOR=$(expr $wi_MINOR \* 10) - fi - wi_READLINE_VERSION=$(expr $wi_MAJOR \* 100 + $wi_MINOR) - else - wi_READLINE_VERSION=-1 - fi - - dnl check for the readline library - - ac_save_LIBS="$LIBS" - # Note: $LIBCURSES is permitted to be empty. - - for LIBREADLINE in "-lreadline.dll" "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses" - do - AC_MSG_CHECKING([for GNU Readline library $LIBREADLINE]) - - LIBS="$ac_save_LIBS $LIBREADLINE" - - AC_TRY_LINK([ - /* includes */ - #include - #include - ],[ - /* function-body */ - int dummy = rl_completion_append_character; /* rl_completion_append_character appeared in version 2.1 */ - readline(NULL); - ],[ - wi_cv_lib_readline=yes - AC_MSG_RESULT(yes) - ],[ - wi_cv_lib_readline=no - AC_MSG_RESULT(no) - ]) - - if test "$wi_cv_lib_readline" = yes; then - AC_SUBST(LIBREADLINE) - AC_DEFINE_UNQUOTED(HAVE_LIBREADLINE, $wi_READLINE_VERSION, [Readline]) - break - fi - done - - LIBS="$ac_save_LIBS" - fi -]) diff --git a/readline/examples/excallback.c b/readline/examples/excallback.c deleted file mode 100644 index 4206acfca4..0000000000 --- a/readline/examples/excallback.c +++ /dev/null @@ -1,196 +0,0 @@ -/* -From: Jeff Solomon -Date: Fri, 9 Apr 1999 10:13:27 -0700 (PDT) -To: chet@po.cwru.edu -Subject: new readline example -Message-ID: <14094.12094.527305.199695@mrclean.Stanford.EDU> - -Chet, - -I've been using readline 4.0. Specifically, I've been using the perl -version Term::ReadLine::Gnu. It works great. - -Anyway, I've been playing around the alternate interface and I wanted -to contribute a little C program, callback.c, to you that you could -use as an example of the alternate interface in the /examples -directory of the readline distribution. - -My example shows how, using the alternate interface, you can -interactively change the prompt (which is very nice imo). Also, I -point out that you must roll your own terminal setting when using the -alternate interface because readline depreps (using your parlance) the -terminal while in the user callback. I try to demostrate what I mean -with an example. I've included the program below. - -To compile, I just put the program in the examples directory and made -the appropriate changes to the EXECUTABLES and OBJECTS line and added -an additional target 'callback'. - -I compiled on my Sun Solaris2.6 box using Sun's cc. - -Let me know what you think. - -Jeff -*/ -/* -Copyright (C) 1999 Jeff Solomon -*/ - -#if defined (HAVE_CONFIG_H) -#include -#endif - -#include - -#ifdef HAVE_UNISTD_H -#include -#endif -#include - -#include -#include /* xxx - should make this more general */ - -#ifdef READLINE_LIBRARY -# include "readline.h" -#else -# include -#endif - -#ifndef STDIN_FILENO -# define STDIN_FILENO 0 -#endif - -/* This little examples demonstrates the alternate interface to using readline. - * In the alternate interface, the user maintains control over program flow and - * only calls readline when STDIN is readable. Using the alternate interface, - * you can do anything else while still using readline (like talking to a - * network or another program) without blocking. - * - * Specifically, this program highlights two importants features of the - * alternate interface. The first is the ability to interactively change the - * prompt, which can't be done using the regular interface since rl_prompt is - * read-only. - * - * The second feature really highlights a subtle point when using the alternate - * interface. That is, readline will not alter the terminal when inside your - * callback handler. So let's so, your callback executes a user command that - * takes a non-trivial amount of time to complete (seconds). While your - * executing the command, the user continues to type keystrokes and expects them - * to be re-echoed on the new prompt when it returns. Unfortunately, the default - * terminal configuration doesn't do this. After the prompt returns, the user - * must hit one additional keystroke and then will see all of his previous - * keystrokes. To illustrate this, compile and run this program. Type "sleep" at - * the prompt and then type "bar" before the prompt returns (you have 3 - * seconds). Notice how "bar" is re-echoed on the prompt after the prompt - * returns? This is what you expect to happen. Now comment out the 4 lines below - * the line that says COMMENT LINE BELOW. Recompile and rerun the program and do - * the same thing. When the prompt returns, you should not see "bar". Now type - * "f", see how "barf" magically appears? This behavior is un-expected and not - * desired. - */ - -void process_line(char *line); -int change_prompt(void); -char *get_prompt(void); - -int prompt = 1; -char prompt_buf[40], line_buf[256]; -tcflag_t old_lflag; -cc_t old_vtime; -struct termios term; - -int -main() -{ - fd_set fds; - - /* Adjust the terminal slightly before the handler is installed. Disable - * canonical mode processing and set the input character time flag to be - * non-blocking. - */ - if( tcgetattr(STDIN_FILENO, &term) < 0 ) { - perror("tcgetattr"); - exit(1); - } - old_lflag = term.c_lflag; - old_vtime = term.c_cc[VTIME]; - term.c_lflag &= ~ICANON; - term.c_cc[VTIME] = 1; - /* COMMENT LINE BELOW - see above */ - if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) { - perror("tcsetattr"); - exit(1); - } - - rl_add_defun("change-prompt", change_prompt, CTRL('t')); - rl_callback_handler_install(get_prompt(), process_line); - - while(1) { - FD_ZERO(&fds); - FD_SET(fileno(stdin), &fds); - - if( select(FD_SETSIZE, &fds, NULL, NULL, NULL) < 0) { - perror("select"); - exit(1); - } - - if( FD_ISSET(fileno(stdin), &fds) ) { - rl_callback_read_char(); - } - } -} - -void -process_line(char *line) -{ - if( line == NULL ) { - fprintf(stderr, "\n", line); - - /* reset the old terminal setting before exiting */ - term.c_lflag = old_lflag; - term.c_cc[VTIME] = old_vtime; - if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) { - perror("tcsetattr"); - exit(1); - } - exit(0); - } - - if( strcmp(line, "sleep") == 0 ) { - sleep(3); - } else { - fprintf(stderr, "|%s|\n", line); - } - - free (line); -} - -int -change_prompt(void) -{ - /* toggle the prompt variable */ - prompt = !prompt; - - /* save away the current contents of the line */ - strcpy(line_buf, rl_line_buffer); - - /* install a new handler which will change the prompt and erase the current line */ - rl_callback_handler_install(get_prompt(), process_line); - - /* insert the old text on the new line */ - rl_insert_text(line_buf); - - /* redraw the current line - this is an undocumented function. It invokes the - * redraw-current-line command. - */ - rl_refresh_line(0, 0); -} - -char * -get_prompt(void) -{ - /* The prompts can even be different lengths! */ - sprintf(prompt_buf, "%s", - prompt ? "Hit ctrl-t to toggle prompt> " : "Pretty cool huh?> "); - return prompt_buf; -} diff --git a/readline/examples/fileman.c b/readline/examples/fileman.c deleted file mode 100644 index c821df033a..0000000000 --- a/readline/examples/fileman.c +++ /dev/null @@ -1,506 +0,0 @@ -/* fileman.c - file manager example for readline library. */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -/* fileman.c -- A tiny application which demonstrates how to use the - GNU Readline library. This application interactively allows users - to manipulate files and their modes. */ - -#ifdef HAVE_CONFIG_H -# include -#endif - -#include -#ifdef HAVE_SYS_FILE_H -# include -#endif -#include - -#ifdef HAVE_UNISTD_H -# include -#endif - -#include -#include -#include - -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -#ifdef HAVE_STDLIB_H -# include -#endif - -#include - -#ifdef READLINE_LIBRARY -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -extern char *xmalloc PARAMS((size_t)); - -void initialize_readline PARAMS((void)); -void too_dangerous PARAMS((char *)); - -int execute_line PARAMS((char *)); -int valid_argument PARAMS((char *, char *)); - -/* The names of functions that actually do the manipulation. */ -int com_list PARAMS((char *)); -int com_view PARAMS((char *)); -int com_rename PARAMS((char *)); -int com_stat PARAMS((char *)); -int com_pwd PARAMS((char *)); -int com_delete PARAMS((char *)); -int com_help PARAMS((char *)); -int com_cd PARAMS((char *)); -int com_quit PARAMS((char *)); - -/* A structure which contains information on the commands this program - can understand. */ - -typedef struct { - char *name; /* User printable name of the function. */ - rl_icpfunc_t *func; /* Function to call to do the job. */ - char *doc; /* Documentation for this function. */ -} COMMAND; - -COMMAND commands[] = { - { "cd", com_cd, "Change to directory DIR" }, - { "delete", com_delete, "Delete FILE" }, - { "help", com_help, "Display this text" }, - { "?", com_help, "Synonym for `help'" }, - { "list", com_list, "List files in DIR" }, - { "ls", com_list, "Synonym for `list'" }, - { "pwd", com_pwd, "Print the current working directory" }, - { "quit", com_quit, "Quit using Fileman" }, - { "rename", com_rename, "Rename FILE to NEWNAME" }, - { "stat", com_stat, "Print out statistics on FILE" }, - { "view", com_view, "View the contents of FILE" }, - { (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL } -}; - -/* Forward declarations. */ -char *stripwhite (); -COMMAND *find_command (); - -/* The name of this program, as taken from argv[0]. */ -char *progname; - -/* When non-zero, this global means the user is done using this program. */ -int done; - -char * -dupstr (s) - char *s; -{ - char *r; - - r = xmalloc (strlen (s) + 1); - strcpy (r, s); - return (r); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *line, *s; - - progname = argv[0]; - - initialize_readline (); /* Bind our completer. */ - - /* Loop reading and executing lines until the user quits. */ - for ( ; done == 0; ) - { - line = readline ("FileMan: "); - - if (!line) - break; - - /* Remove leading and trailing whitespace from the line. - Then, if there is anything left, add it to the history list - and execute it. */ - s = stripwhite (line); - - if (*s) - { - add_history (s); - execute_line (s); - } - - free (line); - } - exit (0); -} - -/* Execute a command line. */ -int -execute_line (line) - char *line; -{ - register int i; - COMMAND *command; - char *word; - - /* Isolate the command word. */ - i = 0; - while (line[i] && whitespace (line[i])) - i++; - word = line + i; - - while (line[i] && !whitespace (line[i])) - i++; - - if (line[i]) - line[i++] = '\0'; - - command = find_command (word); - - if (!command) - { - fprintf (stderr, "%s: No such command for FileMan.\n", word); - return (-1); - } - - /* Get argument to command, if any. */ - while (whitespace (line[i])) - i++; - - word = line + i; - - /* Call the function. */ - return ((*(command->func)) (word)); -} - -/* Look up NAME as the name of a command, and return a pointer to that - command. Return a NULL pointer if NAME isn't a command name. */ -COMMAND * -find_command (name) - char *name; -{ - register int i; - - for (i = 0; commands[i].name; i++) - if (strcmp (name, commands[i].name) == 0) - return (&commands[i]); - - return ((COMMAND *)NULL); -} - -/* Strip whitespace from the start and end of STRING. Return a pointer - into STRING. */ -char * -stripwhite (string) - char *string; -{ - register char *s, *t; - - for (s = string; whitespace (*s); s++) - ; - - if (*s == 0) - return (s); - - t = s + strlen (s) - 1; - while (t > s && whitespace (*t)) - t--; - *++t = '\0'; - - return s; -} - -/* **************************************************************** */ -/* */ -/* Interface to Readline Completion */ -/* */ -/* **************************************************************** */ - -char *command_generator PARAMS((const char *, int)); -char **fileman_completion PARAMS((const char *, int, int)); - -/* Tell the GNU Readline library how to complete. We want to try to complete - on command names if this is the first word in the line, or on filenames - if not. */ -void -initialize_readline () -{ - /* Allow conditional parsing of the ~/.inputrc file. */ - rl_readline_name = "FileMan"; - - /* Tell the completer that we want a crack first. */ - rl_attempted_completion_function = fileman_completion; -} - -/* Attempt to complete on the contents of TEXT. START and END bound the - region of rl_line_buffer that contains the word to complete. TEXT is - the word to complete. We can use the entire contents of rl_line_buffer - in case we want to do some simple parsing. Return the array of matches, - or NULL if there aren't any. */ -char ** -fileman_completion (text, start, end) - const char *text; - int start, end; -{ - char **matches; - - matches = (char **)NULL; - - /* If this word is at the start of the line, then it is a command - to complete. Otherwise it is the name of a file in the current - directory. */ - if (start == 0) - matches = rl_completion_matches (text, command_generator); - - return (matches); -} - -/* Generator function for command completion. STATE lets us know whether - to start from scratch; without any state (i.e. STATE == 0), then we - start at the top of the list. */ -char * -command_generator (text, state) - const char *text; - int state; -{ - static int list_index, len; - char *name; - - /* If this is a new word to complete, initialize now. This includes - saving the length of TEXT for efficiency, and initializing the index - variable to 0. */ - if (!state) - { - list_index = 0; - len = strlen (text); - } - - /* Return the next name which partially matches from the command list. */ - while (name = commands[list_index].name) - { - list_index++; - - if (strncmp (name, text, len) == 0) - return (dupstr(name)); - } - - /* If no names matched, then return NULL. */ - return ((char *)NULL); -} - -/* **************************************************************** */ -/* */ -/* FileMan Commands */ -/* */ -/* **************************************************************** */ - -/* String to pass to system (). This is for the LIST, VIEW and RENAME - commands. */ -static char syscom[1024]; - -/* List the file(s) named in arg. */ -int -com_list (arg) - char *arg; -{ - if (!arg) - arg = ""; - - sprintf (syscom, "ls -FClg %s", arg); - return (system (syscom)); -} - -int -com_view (arg) - char *arg; -{ - if (!valid_argument ("view", arg)) - return 1; - -#if defined (__MSDOS__) - /* more.com doesn't grok slashes in pathnames */ - sprintf (syscom, "less %s", arg); -#else - sprintf (syscom, "more %s", arg); -#endif - return (system (syscom)); -} - -int -com_rename (arg) - char *arg; -{ - too_dangerous ("rename"); - return (1); -} - -int -com_stat (arg) - char *arg; -{ - struct stat finfo; - - if (!valid_argument ("stat", arg)) - return (1); - - if (stat (arg, &finfo) == -1) - { - perror (arg); - return (1); - } - - printf ("Statistics for `%s':\n", arg); - - printf ("%s has %d link%s, and is %d byte%s in length.\n", - arg, - finfo.st_nlink, - (finfo.st_nlink == 1) ? "" : "s", - finfo.st_size, - (finfo.st_size == 1) ? "" : "s"); - printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); - printf (" Last access at: %s", ctime (&finfo.st_atime)); - printf (" Last modified at: %s", ctime (&finfo.st_mtime)); - return (0); -} - -int -com_delete (arg) - char *arg; -{ - too_dangerous ("delete"); - return (1); -} - -/* Print out help for ARG, or for all of the commands if ARG is - not present. */ -int -com_help (arg) - char *arg; -{ - register int i; - int printed = 0; - - for (i = 0; commands[i].name; i++) - { - if (!*arg || (strcmp (arg, commands[i].name) == 0)) - { - printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); - printed++; - } - } - - if (!printed) - { - printf ("No commands match `%s'. Possibilties are:\n", arg); - - for (i = 0; commands[i].name; i++) - { - /* Print in six columns. */ - if (printed == 6) - { - printed = 0; - printf ("\n"); - } - - printf ("%s\t", commands[i].name); - printed++; - } - - if (printed) - printf ("\n"); - } - return (0); -} - -/* Change to the directory ARG. */ -int -com_cd (arg) - char *arg; -{ - if (chdir (arg) == -1) - { - perror (arg); - return 1; - } - - com_pwd (""); - return (0); -} - -/* Print out the current working directory. */ -int -com_pwd (ignore) - char *ignore; -{ - char dir[1024], *s; - - s = getcwd (dir, sizeof(dir) - 1); - if (s == 0) - { - printf ("Error getting pwd: %s\n", dir); - return 1; - } - - printf ("Current directory is %s\n", dir); - return 0; -} - -/* The user wishes to quit using this program. Just set DONE non-zero. */ -int -com_quit (arg) - char *arg; -{ - done = 1; - return (0); -} - -/* Function which tells you that you can't do this. */ -void -too_dangerous (caller) - char *caller; -{ - fprintf (stderr, - "%s: Too dangerous for me to distribute. Write it yourself.\n", - caller); -} - -/* Return non-zero if ARG is a valid argument for CALLER, else print - an error message and return zero. */ -int -valid_argument (caller, arg) - char *caller, *arg; -{ - if (!arg || !*arg) - { - fprintf (stderr, "%s: Argument required.\n", caller); - return (0); - } - - return (1); -} diff --git a/readline/examples/hist_erasedups.c b/readline/examples/hist_erasedups.c deleted file mode 100644 index f820eba6aa..0000000000 --- a/readline/examples/hist_erasedups.c +++ /dev/null @@ -1,121 +0,0 @@ -/* hist_erasedups -- remove all duplicate entries from history file */ - -/* Copyright (C) 2011 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ -#ifndef READLINE_LIBRARY -#define READLINE_LIBRARY 1 -#endif - -#include -#include -#include - -#ifdef READLINE_LIBRARY -# include "history.h" -#else -# include -#endif - -#include - -#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0) -#define STREQN(a, b, n) ((n == 0) ? (1) \ - : ((a)[0] == (b)[0] && strncmp(a, b, n) == 0)) - -int hist_erasedups (void); - -static void -usage() -{ - fprintf (stderr, "hist_erasedups: usage: hist_erasedups [-t] [filename]\n"); - exit (2); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *fn; - int r; - - while ((r = getopt (argc, argv, "t")) != -1) - { - switch (r) - { - case 't': - history_write_timestamps = 1; - break; - default: - usage (); - } - } - argv += optind; - argc -= optind; - - fn = argc ? argv[0] : getenv ("HISTFILE"); - if (fn == 0) - { - fprintf (stderr, "hist_erasedups: no history file\n"); - usage (); - } - - if ((r = read_history (fn)) != 0) - { - fprintf (stderr, "hist_erasedups: read_history: %s: %s\n", fn, strerror (r)); - exit (1); - } - - hist_erasedups (); - - if ((r = write_history (fn)) != 0) - { - fprintf (stderr, "hist_erasedups: write_history: %s: %s\n", fn, strerror (r)); - exit (1); - } - - exit (0); -} - -int -hist_erasedups () -{ - int r, n; - HIST_ENTRY *h, *temp; - - using_history (); - while (h = previous_history ()) - { - r = where_history (); - for (n = 0; n < r; n++) - { - temp = history_get (n+history_base); - if (STREQ (h->line, temp->line)) - { - remove_history (n); - r--; /* have to get one fewer now */ - n--; /* compensate for above increment */ - history_offset--; /* moving backwards in history list */ - } - } - } - using_history (); - - return r; -} diff --git a/readline/examples/hist_purgecmd.c b/readline/examples/hist_purgecmd.c deleted file mode 100644 index 7992d810dd..0000000000 --- a/readline/examples/hist_purgecmd.c +++ /dev/null @@ -1,151 +0,0 @@ -/* hist_purgecmd -- remove all instances of command or pattern from history - file */ - -/* Copyright (C) 2011 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ -#ifndef READLINE_LIBRARY -#define READLINE_LIBRARY 1 -#endif - -#include -#include -#include - -#include - -#ifdef READLINE_LIBRARY -# include "history.h" -#else -# include -#endif - -#include - -#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0) -#define STREQN(a, b, n) ((n == 0) ? (1) \ - : ((a)[0] == (b)[0] && strncmp(a, b, n) == 0)) - -#define PURGE_REGEXP 0x01 - -int hist_purgecmd (char *, int); - -static void -usage() -{ - fprintf (stderr, "hist_purgecmd: usage: hist_purgecmd [-r] [-t] [-f filename] command-spec\n"); - exit (2); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *fn; - int r, flags; - - flags = 0; - fn = 0; - while ((r = getopt (argc, argv, "f:rt")) != -1) - { - switch (r) - { - case 'f': - fn = optarg; - break; - case 'r': - flags |= PURGE_REGEXP; - break; - case 't': - history_write_timestamps = 1; - break; - default: - usage (); - } - } - argv += optind; - argc -= optind; - - if (fn == 0) - fn = getenv ("HISTFILE"); - if (fn == 0) - { - fprintf (stderr, "hist_purgecmd: no history file\n"); - usage (); - } - - if ((r = read_history (fn)) != 0) - { - fprintf (stderr, "hist_purgecmd: read_history: %s: %s\n", fn, strerror (r)); - exit (1); - } - - for (r = 0; r < argc; r++) - hist_purgecmd (argv[r], flags); - - if ((r = write_history (fn)) != 0) - { - fprintf (stderr, "hist_purgecmd: write_history: %s: %s\n", fn, strerror (r)); - exit (1); - } - - exit (0); -} - -int -hist_purgecmd (cmd, flags) - char *cmd; - int flags; -{ - int r, n, rflags; - HIST_ENTRY *temp; - regex_t regex = { 0 }; - - if (flags & PURGE_REGEXP) - { - rflags = REG_EXTENDED|REG_NOSUB; - if (regcomp (®ex, cmd, rflags)) - { - fprintf (stderr, "hist_purgecmd: %s: invalid regular expression\n", cmd); - return -1; - } - } - - r = 0; - using_history (); - r = where_history (); - for (n = 0; n < r; n++) - { - temp = history_get (n+history_base); - if (((flags & PURGE_REGEXP) && (regexec (®ex, temp->line, 0, 0, 0) == 0)) || - ((flags & PURGE_REGEXP) == 0 && STREQ (temp->line, cmd))) - { - remove_history (n); - r--; /* have to get one fewer now */ - n--; /* compensate for above increment */ - history_offset--; /* moving backwards in history list */ - } - } - using_history (); - - if (flags & PURGE_REGEXP) - regfree (®ex); - - return r; -} diff --git a/readline/examples/histexamp.c b/readline/examples/histexamp.c deleted file mode 100644 index 309d769b38..0000000000 --- a/readline/examples/histexamp.c +++ /dev/null @@ -1,128 +0,0 @@ -/* histexamp.c - history library example program. */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#include - -#ifdef READLINE_LIBRARY -# include "history.h" -#else -# include -#endif - -#include -#include -#include - -int -main (argc, argv) - int argc; - char **argv; -{ - char line[1024], *t; - int len, done; - - line[0] = 0; - done = 0; - - using_history (); - while (!done) - { - printf ("history$ "); - fflush (stdout); - t = fgets (line, sizeof (line) - 1, stdin); - if (t && *t) - { - len = strlen (t); - if (t[len - 1] == '\n') - t[len - 1] = '\0'; - } - - if (!t) - strcpy (line, "quit"); - - if (line[0]) - { - char *expansion; - int result; - - using_history (); - - result = history_expand (line, &expansion); - if (result) - fprintf (stderr, "%s\n", expansion); - - if (result < 0 || result == 2) - { - free (expansion); - continue; - } - - add_history (expansion); - strncpy (line, expansion, sizeof (line) - 1); - free (expansion); - } - - if (strcmp (line, "quit") == 0) - done = 1; - else if (strcmp (line, "save") == 0) - write_history ("history_file"); - else if (strcmp (line, "read") == 0) - read_history ("history_file"); - else if (strcmp (line, "list") == 0) - { - register HIST_ENTRY **the_list; - register int i; - time_t tt; - char timestr[128]; - - the_list = history_list (); - if (the_list) - for (i = 0; the_list[i]; i++) - { - tt = history_get_time (the_list[i]); - if (tt) - strftime (timestr, sizeof (timestr), "%a %R", localtime(&tt)); - else - strcpy (timestr, "??"); - printf ("%d: %s: %s\n", i + history_base, timestr, the_list[i]->line); - } - } - else if (strncmp (line, "delete", 6) == 0) - { - int which; - if ((sscanf (line + 6, "%d", &which)) == 1) - { - HIST_ENTRY *entry = remove_history (which); - if (!entry) - fprintf (stderr, "No such entry %d\n", which); - else - { - free (entry->line); - free (entry); - } - } - else - { - fprintf (stderr, "non-numeric arg given to `delete'\n"); - } - } - } -} diff --git a/readline/examples/manexamp.c b/readline/examples/manexamp.c deleted file mode 100644 index 351c6285ed..0000000000 --- a/readline/examples/manexamp.c +++ /dev/null @@ -1,111 +0,0 @@ -/* manexamp.c -- The examples which appear in the documentation are here. */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#include -#include - -/* **************************************************************** */ -/* */ -/* How to Emulate gets () */ -/* */ -/* **************************************************************** */ - -/* A static variable for holding the line. */ -static char *line_read = (char *)NULL; - -/* Read a string, and return a pointer to it. Returns NULL on EOF. */ -char * -rl_gets () -{ - /* If the buffer has already been allocated, return the memory - to the free pool. */ - if (line_read) - { - free (line_read); - line_read = (char *)NULL; - } - - /* Get a line from the user. */ - line_read = readline (""); - - /* If the line has any text in it, save it on the history. */ - if (line_read && *line_read) - add_history (line_read); - - return (line_read); -} - -/* **************************************************************** */ -/* */ -/* Writing a Function to be Called by Readline. */ -/* */ -/* **************************************************************** */ - -/* Invert the case of the COUNT following characters. */ -invert_case_line (count, key) - int count, key; -{ - register int start, end; - - start = rl_point; - - if (count < 0) - { - direction = -1; - count = -count; - } - else - direction = 1; - - /* Find the end of the range to modify. */ - end = start + (count * direction); - - /* Force it to be within range. */ - if (end > rl_end) - end = rl_end; - else if (end < 0) - end = -1; - - if (start > end) - { - int temp = start; - start = end; - end = temp; - } - - if (start == end) - return; - - /* Tell readline that we are modifying the line, so save the undo - information. */ - rl_modifying (start, end); - - for (; start != end; start += direction) - { - if (_rl_uppercase_p (rl_line_buffer[start])) - rl_line_buffer[start] = _rl_to_lower (rl_line_buffer[start]); - else if (_rl_lowercase_p (rl_line_buffer[start])) - rl_line_buffer[start] = _rl_to_upper (rl_line_buffer[start]); - } - - /* Move point to on top of the last character changed. */ - rl_point = end - direction; -} diff --git a/readline/examples/readlinebuf.h b/readline/examples/readlinebuf.h deleted file mode 100644 index c8f3a7b41e..0000000000 --- a/readline/examples/readlinebuf.h +++ /dev/null @@ -1,139 +0,0 @@ -/******************************************************************************* - * $Revision: 1.2 $ - * $Date: 2001/09/11 06:19:36 $ - * $Author: vyzo $ - * - * Contents: A streambuf which uses the GNU readline library for line I/O - * (c) 2001 by Dimitris Vyzovitis [vyzo@media.mit.edu] - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - ******************************************************************************/ - -#ifndef _READLINEBUF_H_ -#define _READLINEBUF_H_ - -#include -#include -#include -#include -#include - -#include -#include - -#if (defined __GNUC__) && (__GNUC__ < 3) -#include -#else -#include -using std::streamsize; -using std::streambuf; -#endif - -class readlinebuf : public streambuf { -public: -#if (defined __GNUC__) && (__GNUC__ < 3) - typedef char char_type; - typedef int int_type; - typedef streampos pos_type; - typedef streamoff off_type; -#endif - static const int_type eof = EOF; // this is -1 - static const int_type not_eof = 0; - -private: - const char* prompt_; - bool history_; - char* line_; - int low_; - int high_; - -protected: - - virtual int_type showmanyc() const { return high_ - low_; } - - virtual streamsize xsgetn( char_type* buf, streamsize n ) { - int rd = n > (high_ - low_)? (high_ - low_) : n; - memcpy( buf, line_, rd ); - low_ += rd; - - if ( rd < n ) { - low_ = high_ = 0; - free( line_ ); // free( NULL ) is a noop - line_ = readline( prompt_ ); - if ( line_ ) { - high_ = strlen( line_ ); - if ( history_ && high_ ) add_history( line_ ); - rd += xsgetn( buf + rd, n - rd ); - } - } - - return rd; - } - - virtual int_type underflow() { - if ( high_ == low_ ) { - low_ = high_ = 0; - free( line_ ); // free( NULL ) is a noop - line_ = readline( prompt_ ); - if ( line_ ) { - high_ = strlen( line_ ); - if ( history_ && high_ ) add_history( line_ ); - } - } - - if ( low_ < high_ ) return line_[low_]; - else return eof; - } - - virtual int_type uflow() { - int_type c = underflow(); - if ( c != eof ) ++low_; - return c; - } - - virtual int_type pbackfail( int_type c = eof ) { - if ( low_ > 0 ) --low_; - else if ( c != eof ) { - if ( high_ > 0 ) { - char* nl = (char*)realloc( line_, high_ + 1 ); - if ( nl ) { - line_ = (char*)memcpy( nl + 1, line_, high_ ); - high_ += 1; - line_[0] = char( c ); - } else return eof; - } else { - assert( !line_ ); - line_ = (char*)malloc( sizeof( char ) ); - *line_ = char( c ); - high_ = 1; - } - } else return eof; - - return not_eof; - } - -public: - readlinebuf( const char* prompt = NULL, bool history = true ) - : prompt_( prompt ), history_( history ), - line_( NULL ), low_( 0 ), high_( 0 ) { - setbuf( 0, 0 ); - } - - -}; - -#endif diff --git a/readline/examples/rl-callbacktest.c b/readline/examples/rl-callbacktest.c deleted file mode 100644 index 3525ffd999..0000000000 --- a/readline/examples/rl-callbacktest.c +++ /dev/null @@ -1,115 +0,0 @@ -/* Standard include files. stdio.h is required. */ -#include -#include -#include -#include - -/* Used for select(2) */ -#include -#include - -#include - -#include -#include - -/* Standard readline include files. */ -#if defined (READLINE_LIBRARY) -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -extern int errno; - -static void cb_linehandler (char *); -static void signandler (int); - -int running, sigwinch_received; -const char *prompt = "rltest$ "; - -/* Handle SIGWINCH and window size changes when readline is not active and - reading a character. */ -static void -sighandler (int sig) -{ - sigwinch_received = 1; -} - -/* Callback function called for each line when accept-line executed, EOF - seen, or EOF character read. This sets a flag and returns; it could - also call exit(3). */ -static void -cb_linehandler (char *line) -{ - /* Can use ^D (stty eof) or `exit' to exit. */ - if (line == NULL || strcmp (line, "exit") == 0) - { - if (line == 0) - printf ("\n"); - printf ("exit\n"); - /* This function needs to be called to reset the terminal settings, - and calling it from the line handler keeps one extra prompt from - being displayed. */ - rl_callback_handler_remove (); - - running = 0; - } - else - { - if (*line) - add_history (line); - printf ("input line: %s\n", line); - free (line); - } -} - -int -main (int c, char **v) -{ - fd_set fds; - int r; - - - setlocale (LC_ALL, ""); - - /* Handle SIGWINCH */ - signal (SIGWINCH, sighandler); - - /* Install the line handler. */ - rl_callback_handler_install (prompt, cb_linehandler); - - /* Enter a simple event loop. This waits until something is available - to read on readline's input stream (defaults to standard input) and - calls the builtin character read callback to read it. It does not - have to modify the user's terminal settings. */ - running = 1; - while (running) - { - FD_ZERO (&fds); - FD_SET (fileno (rl_instream), &fds); - - r = select (FD_SETSIZE, &fds, NULL, NULL, NULL); - if (r < 0 && errno != EINTR) - { - perror ("rltest: select"); - rl_callback_handler_remove (); - break; - } - if (sigwinch_received) - { - rl_resize_terminal (); - sigwinch_received = 0; - } - if (r < 0) - continue; - - if (FD_ISSET (fileno (rl_instream), &fds)) - rl_callback_read_char (); - } - - printf ("rltest: Event loop has exited\n"); - return 0; -} diff --git a/readline/examples/rl-fgets.c b/readline/examples/rl-fgets.c deleted file mode 100644 index 5512b94ab2..0000000000 --- a/readline/examples/rl-fgets.c +++ /dev/null @@ -1,374 +0,0 @@ -/* -Date: Tue, 16 Mar 2004 19:38:40 -0800 -From: Harold Levy -Subject: fgets(stdin) --> readline() redirector -To: chet@po.cwru.edu - -Hi Chet, - -Here is something you may find useful enough to include in the readline -distribution. It is a shared library that redirects calls to fgets(stdin) -to readline() via LD_PRELOAD, and it supports a custom prompt and list of -command names. Many people have asked me for this file, so I thought I'd -pass it your way in hope of just including it with readline to begin with. - -Best Regards, - --Harold -*/ - -/****************************************************************************** -******************************************************************************* - - FILE NAME: fgets.c TARGET: libfgets.so - AUTHOR: Harold Levy VERSION: 1.0 - hlevy@synopsys.com - - ABSTRACT: Customize fgets() behavior via LD_PRELOAD in the following ways: - - -- If fgets(stdin) is called, redirect to GNU readline() to obtain - command-line editing, file-name completion, history, etc. - - -- A list of commands for command-name completion can be configured by - setting the environment-variable FGETS_COMMAND_FILE to a file containing - the list of commands to be used. - - -- Command-line editing with readline() works best when the prompt string - is known; you can set this with the FGETS_PROMPT environment variable. - - -- There special strings that libfgets will interpret as internal commands: - - _fgets_reset_ reset the command list - - _fgets_dump_ dump status - - _fgets_debug_ toggle debug messages - - HOW TO BUILD: Here are examples of how to build libfgets.so on various - platforms; you will have to add -I and -L flags to configure access to - the readline header and library files. - - (32-bit builds with gcc) - AIX: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lreadline -ltermcap - HP-UX: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldld -lreadline - Linux: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lreadline - SunOS: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lgen -lreadline - - (64-bit builds without gcc) - SunOS: SUNWspro/bin/cc -D_LARGEFILE64_SOURCE=1 -xtarget=ultra -xarch=v9 \ - -KPIC fgets.c -Bdynamic -lc -ldl -lgen -ltermcap -lreadline - - HOW TO USE: Different operating systems have different levels of support - for the LD_PRELOAD concept. The generic method for 32-bit platforms is to - put libtermcap.so, libfgets.so, and libreadline.so (with absolute paths) - in the LD_PRELOAD environment variable, and to put their parent directories - in the LD_LIBRARY_PATH environment variable. Unfortunately there is no - generic method for 64-bit platforms; e.g. for 64-bit SunOS, you would have - to build both 32-bit and 64-bit libfgets and libreadline libraries, and - use the LD_FLAGS_32 and LD_FLAGS_64 environment variables with preload and - library_path configurations (a mix of 32-bit and 64-bit calls are made under - 64-bit SunOS). - - EXAMPLE WRAPPER: Here is an example shell script wrapper around the - program "foo" that uses fgets() for command-line input: - - #!/bin/csh - #### replace this with the libtermcap.so directory: - set dir1 = "/usr/lib" - #### replace this with the libfgets.so directory: - set dir2 = "/usr/fgets" - #### replace this with the libreadline.so directory: - set dir3 = "/usr/local/lib" - set lib1 = "${dir1}/libtermcap.so" - set lib2 = "${dir2}/libfgets.so" - set lib3 = "${dir3}/libreadline.so" - if ( "${?LD_PRELOAD}" ) then - setenv LD_PRELOAD "${lib1}:${lib2}:${lib3}:${LD_PRELOAD}" - else - setenv LD_PRELOAD "${lib1}:${lib2}:${lib3}" - endif - if ( "${?LD_LIBRARY_PATH}" ) then - setenv LD_LIBRARY_PATH "${dir1}:${dir2}:${dir3}:${LD_LIBRARY_PATH}" - else - setenv LD_LIBRARY_PATH "${dir1}:${dir2}:${dir3}" - endif - setenv FGETS_COMMAND_FILE "${dir2}/foo.commands" - setenv FGETS_PROMPT "foo> " - exec "foo" $* - - Copyright (C)©2003-2004 Harold Levy. - - This code links to the GNU readline library, and as such is bound by the - terms of the GNU General Public License as published by the Free Software - Foundation, either version 2 or (at your option) any later version. - - The GNU General Public License is often shipped with GNU software, and is - generally kept in a file called COPYING or LICENSE. If you do not have a - copy of the license, write to the Free Software Foundation, 59 Temple Place, - Suite 330, Boston, MA 02111 USA. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS - FOR A PARTICULAR PURPOSE. See the GNU General Public License for more - details. - -******************************************************************************* -******************************************************************************/ - - - -#include -#include -#include -#include -#include - -#include -#include - - - -/* for dynamically connecting to the native fgets() */ -#if defined(RTLD_NEXT) -#define REAL_LIBC RTLD_NEXT -#else -#define REAL_LIBC ((void *) -1L) -#endif -typedef char * ( * fgets_t ) ( char * s, int n, FILE * stream ) ; - - - -/* private data */ -/* -- writeable data is stored in the shared library's data segment - -- every process that uses the shared library gets a private memory copy of - its entire data segment - -- static data in the shared library is not copied to the application - -- only read-only (i.e. 'const') data is stored in the shared library's - text segment -*/ -static char ** my_fgets_names = NULL ; -static int my_fgets_number_of_names = 0 ; -static int my_fgets_debug_flag = 0 ; - - - -/* invoked with _fgets_reset_ */ -static void -my_fgets_reset ( - void -) { - if ( my_fgets_names && (my_fgets_number_of_names > 0) ) { - int i ; - if ( my_fgets_debug_flag ) { - printf ( "libfgets: removing command list\n" ) ; - } - for ( i = 0 ; i < my_fgets_number_of_names ; i ++ ) { - if ( my_fgets_names[i] ) free ( my_fgets_names[i] ) ; - } - free ( my_fgets_names ) ; - } - my_fgets_names = NULL ; - my_fgets_number_of_names = 0 ; -} - - - -/* invoked with _fgets_dump_ */ -static void -my_fgets_dump ( - void -) { - char * s ; - printf ( "\n" ) ; - s = getenv ( "FGETS_PROMPT" ) ; - printf ( "FGETS_PROMPT = %s\n", s ? s : "" ) ; - s = getenv ( "FGETS_COMMAND_FILE" ) ; - printf ( "FGETS_COMMAND_FILE = %s\n", s ? s : "" ) ; - printf ( "debug flag = %d\n", my_fgets_debug_flag ) ; - printf ( "#commands = %d\n", my_fgets_number_of_names ) ; - if ( my_fgets_debug_flag ) { - if ( my_fgets_names && (my_fgets_number_of_names > 0) ) { - int i ; - for ( i = 0 ; i < my_fgets_number_of_names ; i ++ ) { - printf ( "%s\n", my_fgets_names[i] ) ; - } - } - } - printf ( "\n" ) ; -} - - - -/* invoked with _fgets_debug_ */ -static void -my_fgets_debug_toggle ( - void -) { - my_fgets_debug_flag = my_fgets_debug_flag ? 0 : 1 ; - if ( my_fgets_debug_flag ) { - printf ( "libfgets: debug flag = %d\n", my_fgets_debug_flag ) ; - } -} - - - -/* read the command list if needed, return the i-th name */ -static char * -my_fgets_lookup ( - int index -) { - if ( (! my_fgets_names) || (! my_fgets_number_of_names) ) { - char * fname ; - FILE * fp ; - fgets_t _fgets ; - int i ; - char buf1[256], buf2[256] ; - fname = getenv ( "FGETS_COMMAND_FILE" ) ; - if ( ! fname ) { - if ( my_fgets_debug_flag ) { - printf ( "libfgets: empty or unset FGETS_COMMAND_FILE\n" ) ; - } - return NULL ; - } - fp = fopen ( fname, "r" ) ; - if ( ! fp ) { - if ( my_fgets_debug_flag ) { - printf ( "libfgets: cannot open '%s' for reading\n", fname ) ; - } - return NULL ; - } - _fgets = (fgets_t) dlsym ( REAL_LIBC, "fgets" ) ; - if ( ! _fgets ) { - fprintf ( stderr, - "libfgets: failed to dynamically link to native fgets()\n" - ) ; - return NULL ; - } - for ( i = 0 ; _fgets(buf1,255,fp) ; i ++ ) ; - if ( ! i ) { fclose(fp) ; return NULL ; } - my_fgets_names = (char**) calloc ( i, sizeof(char*) ) ; - rewind ( fp ) ; - i = 0 ; - while ( _fgets(buf1,255,fp) ) { - buf1[255] = 0 ; - if ( 1 == sscanf(buf1,"%s",buf2) ) { - my_fgets_names[i] = strdup(buf2) ; - i ++ ; - } - } - fclose ( fp ) ; - my_fgets_number_of_names = i ; - if ( my_fgets_debug_flag ) { - printf ( "libfgets: successfully read %d commands\n", i ) ; - } - } - if ( index < my_fgets_number_of_names ) { - return my_fgets_names[index] ; - } else { - return NULL ; - } -} - - - -/* generate a list of partial name matches for readline() */ -static char * -my_fgets_generator ( - const char * text, - int state -) -{ - static int list_index, len ; - char * name ; - if ( ! state ) { - list_index = 0 ; - len = strlen ( text ) ; - } - while ( ( name = my_fgets_lookup(list_index) ) ) { - list_index ++ ; - if ( ! strncmp ( name, text, len ) ) { - return ( strdup ( name ) ) ; - } - } - return ( NULL ) ; -} - - - -/* partial name completion callback for readline() */ -static char ** -my_fgets_completion ( - const char * text, - int start, - int end -) -{ - char ** matches ; - matches = NULL ; - if ( ! start ) { - matches = rl_completion_matches ( text, my_fgets_generator ) ; - } - return ( matches ) ; -} - - - -/* fgets() intercept */ -char * -fgets ( - char * s, - int n, - FILE * stream -) -{ - if ( ! s ) return NULL ; - if ( stream == stdin ) { - char * prompt ; - char * my_fgets_line ; - rl_already_prompted = 1 ; - rl_attempted_completion_function = my_fgets_completion ; - rl_catch_signals = 1 ; - rl_catch_sigwinch = 1 ; - rl_set_signals () ; - prompt = getenv ( "FGETS_PROMPT" ) ; - for ( - my_fgets_line = 0 ; ! my_fgets_line ; my_fgets_line=readline(prompt) - ) ; - if ( ! strncmp(my_fgets_line, "_fgets_reset_", 13) ) { - my_fgets_reset () ; - free ( my_fgets_line ) ; - strcpy ( s, "\n" ) ; - return ( s ) ; - } - if ( ! strncmp(my_fgets_line, "_fgets_dump_", 12) ) { - my_fgets_dump () ; - free ( my_fgets_line ) ; - strcpy ( s, "\n" ) ; - return ( s ) ; - } - if ( ! strncmp(my_fgets_line, "_fgets_debug_", 13) ) { - my_fgets_debug_toggle () ; - free ( my_fgets_line ) ; - strcpy ( s, "\n" ) ; - return ( s ) ; - } - (void) strncpy ( s, my_fgets_line, n-1 ) ; - (void) strcat ( s, "\n" ) ; - if ( *my_fgets_line ) add_history ( my_fgets_line ) ; - free ( my_fgets_line ) ; - return ( s ) ; - } else { - static fgets_t _fgets ; - _fgets = (fgets_t) dlsym ( REAL_LIBC, "fgets" ) ; - if ( ! _fgets ) { - fprintf ( stderr, - "libfgets: failed to dynamically link to native fgets()\n" - ) ; - strcpy ( s, "\n" ) ; - return ( s ) ; - } - return ( - _fgets ( s, n, stream ) - ) ; - } -} diff --git a/readline/examples/rl.c b/readline/examples/rl.c deleted file mode 100644 index a5cf276cb9..0000000000 --- a/readline/examples/rl.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * rl - command-line interface to read a line from the standard input - * (or another fd) using readline. - * - * usage: rl [-p prompt] [-u unit] [-d default] [-n nchars] - */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include - -#ifdef HAVE_STDLIB_H -# include -#else -extern void exit(); -#endif - -#if defined (READLINE_LIBRARY) -# include "posixstat.h" -# include "readline.h" -# include "history.h" -#else -# include -# include -# include -#endif - -extern int optind; -extern char *optarg; - -#if !defined (strchr) && !defined (__STDC__) -extern char *strrchr(); -#endif - -static char *progname; -static char *deftext; - -static int -set_deftext () -{ - if (deftext) - { - rl_insert_text (deftext); - deftext = (char *)NULL; - rl_startup_hook = (rl_hook_func_t *)NULL; - } - return 0; -} - -static void -usage() -{ - fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default] [-n nchars]\n", - progname, progname); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *temp, *prompt; - struct stat sb; - int opt, fd, nch; - FILE *ifp; - - progname = strrchr(argv[0], '/'); - if (progname == 0) - progname = argv[0]; - else - progname++; - - /* defaults */ - prompt = "readline$ "; - fd = nch = 0; - deftext = (char *)0; - - while ((opt = getopt(argc, argv, "p:u:d:n:")) != EOF) - { - switch (opt) - { - case 'p': - prompt = optarg; - break; - case 'u': - fd = atoi(optarg); - if (fd < 0) - { - fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg); - exit (2); - } - break; - case 'd': - deftext = optarg; - break; - case 'n': - nch = atoi(optarg); - if (nch < 0) - { - fprintf (stderr, "%s: bad value for -n: `%s'\n", progname, optarg); - exit (2); - } - break; - default: - usage (); - exit (2); - } - } - - if (fd != 0) - { - if (fstat (fd, &sb) < 0) - { - fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd); - exit (1); - } - ifp = fdopen (fd, "r"); - rl_instream = ifp; - } - - if (deftext && *deftext) - rl_startup_hook = set_deftext; - - if (nch > 0) - rl_num_chars_to_read = nch; - - temp = readline (prompt); - - /* Test for EOF. */ - if (temp == 0) - exit (1); - - printf ("%s\n", temp); - exit (0); -} diff --git a/readline/examples/rlbasic.c b/readline/examples/rlbasic.c deleted file mode 100644 index 6a9601f52a..0000000000 --- a/readline/examples/rlbasic.c +++ /dev/null @@ -1,29 +0,0 @@ -#include -#include -#include -#include - -#if defined (READLINE_LIBRARY) -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -int -main (int c, char **v) -{ - char *input; - - for (;;) { - input = readline ((char *)NULL); - if (input == 0) - break; - printf ("%s\n", input); - if (strcmp (input, "exit") == 0) - break; - free (input); - } - exit (0); -} diff --git a/readline/examples/rlcat.c b/readline/examples/rlcat.c deleted file mode 100644 index b4942413f8..0000000000 --- a/readline/examples/rlcat.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * rlcat - cat(1) using readline - * - * usage: rlcat - */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#ifdef HAVE_UNISTD_H -# include -#endif - -#include -#include "posixstat.h" - -#include -#include -#include -#include - -#ifdef HAVE_STDLIB_H -# include -#else -extern void exit(); -#endif - -#ifndef errno -extern int errno; -#endif - -#if defined (READLINE_LIBRARY) -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -extern int optind; -extern char *optarg; - -static int stdcat(); - -static char *progname; -static int vflag; - -static void -usage() -{ - fprintf (stderr, "%s: usage: %s [-vEVN] [filename]\n", progname, progname); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *temp; - int opt, Vflag, Nflag; - - progname = strrchr(argv[0], '/'); - if (progname == 0) - progname = argv[0]; - else - progname++; - - vflag = Vflag = Nflag = 0; - while ((opt = getopt(argc, argv, "vEVN")) != EOF) - { - switch (opt) - { - case 'v': - vflag = 1; - break; - case 'V': - Vflag = 1; - break; - case 'E': - Vflag = 0; - break; - case 'N': - Nflag = 1; - break; - default: - usage (); - exit (2); - } - } - - argc -= optind; - argv += optind; - - if (isatty(0) == 0 || argc || Nflag) - return stdcat(argc, argv); - - rl_variable_bind ("editing-mode", Vflag ? "vi" : "emacs"); - while (temp = readline ("")) - { - if (*temp) - add_history (temp); - printf ("%s\n", temp); - } - - return (ferror (stdout)); -} - -static int -fcopy(fp) - FILE *fp; -{ - int c; - char *x; - - while ((c = getc(fp)) != EOF) - { - if (vflag && isascii ((unsigned char)c) && isprint((unsigned char)c) == 0) - { - x = rl_untranslate_keyseq (c); - if (fputs (x, stdout) == EOF) - return 1; - } - else if (putchar (c) == EOF) - return 1; - } - return (ferror (stdout)); -} - -int -stdcat (argc, argv) - int argc; - char **argv; -{ - int i, fd, r; - char *s; - FILE *fp; - - if (argc == 0) - return (fcopy(stdin)); - - for (i = 0, r = 1; i < argc; i++) - { - if (*argv[i] == '-' && argv[i][1] == 0) - fp = stdin; - else - { - fp = fopen (argv[i], "r"); - if (fp == 0) - { - fprintf (stderr, "%s: %s: cannot open: %s\n", progname, argv[i], strerror(errno)); - continue; - } - } - r = fcopy (fp); - if (fp != stdin) - fclose(fp); - } - return r; -} diff --git a/readline/examples/rlevent.c b/readline/examples/rlevent.c deleted file mode 100644 index 8143cb02aa..0000000000 --- a/readline/examples/rlevent.c +++ /dev/null @@ -1,173 +0,0 @@ -/* - * rl - command-line interface to read a line from the standard input - * (or another fd) using readline. - * - * usage: rl [-p prompt] [-u unit] [-d default] [-n nchars] - */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#ifdef HAVE_UNISTD_H -# include -#else -extern int getopt(); -extern int sleep(); -#endif - -#include -#include - -#ifdef HAVE_STDLIB_H -# include -#else -extern void exit(); -#endif - -#if defined (READLINE_LIBRARY) -# include "posixstat.h" -# include "readline.h" -# include "history.h" -#else -# include -# include -# include -#endif - -extern int optind; -extern char *optarg; - -#if !defined (strchr) && !defined (__STDC__) -extern char *strrchr(); -#endif - -static char *progname; -static char *deftext; - -static int -event_hook () -{ - fprintf (stderr, "ding!\n"); - sleep (1); - return 0; -} - -static int -set_deftext () -{ - if (deftext) - { - rl_insert_text (deftext); - deftext = (char *)NULL; - rl_startup_hook = (rl_hook_func_t *)NULL; - } - return 0; -} - -static void -usage() -{ - fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default] [-n nchars]\n", - progname, progname); -} - -int -main (argc, argv) - int argc; - char **argv; -{ - char *temp, *prompt; - struct stat sb; - int opt, fd, nch; - FILE *ifp; - - progname = strrchr(argv[0], '/'); - if (progname == 0) - progname = argv[0]; - else - progname++; - - /* defaults */ - prompt = "readline$ "; - fd = nch = 0; - deftext = (char *)0; - - while ((opt = getopt(argc, argv, "p:u:d:n:")) != EOF) - { - switch (opt) - { - case 'p': - prompt = optarg; - break; - case 'u': - fd = atoi(optarg); - if (fd < 0) - { - fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg); - exit (2); - } - break; - case 'd': - deftext = optarg; - break; - case 'n': - nch = atoi(optarg); - if (nch < 0) - { - fprintf (stderr, "%s: bad value for -n: `%s'\n", progname, optarg); - exit (2); - } - break; - default: - usage (); - exit (2); - } - } - - if (fd != 0) - { - if (fstat (fd, &sb) < 0) - { - fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd); - exit (1); - } - ifp = fdopen (fd, "r"); - rl_instream = ifp; - } - - if (deftext && *deftext) - rl_startup_hook = set_deftext; - - if (nch > 0) - rl_num_chars_to_read = nch; - - rl_event_hook = event_hook; - temp = readline (prompt); - - /* Test for EOF. */ - if (temp == 0) - exit (1); - - printf ("%s\n", temp); - exit (0); -} diff --git a/readline/examples/rlfe/ChangeLog b/readline/examples/rlfe/ChangeLog deleted file mode 100644 index ba41b2b720..0000000000 --- a/readline/examples/rlfe/ChangeLog +++ /dev/null @@ -1,37 +0,0 @@ -2004-11-04 Per Bothner - - * pty.c: Import from screen-4.0.2. - * configure.in, Makefile.in, config.h.in: Set up autoconf handling, - copying a bunk of stuff over from screen. - * rlfe.c: Use OpenPTY from pty.c instead of get_master_pty. - -2004-11-03 Per Bothner - - * rlfe.c: Get input emphasis (boldening) more robust. - - * rlfe.c: Various cleanups on comments and names. - -2003-11-07 Wolfgang Taeuber - - * Specify a history file and the size of the history file with command - * line options; use EDITOR/VISUAL to set vi/emacs preference. - -1999-09-03 Chet Ramey - - * fep.c: Memmove is not universally available. This patch assumes - that an autoconf test has been performed, and that memcpy is - available without checking. - - * fep.c: VDISCARD is not universally available, even when termios is. - - * fep.c: If a system doesn't have TIOCSCTTY, the first `open' - performed after setsid allocates a controlling terminal. The - original code would leave the child process running on the slave pty - without a controlling tty if TIOCSCTTY was not available. - - * fep.c: Most versions of SVR4, including solaris, don't allow - terminal ioctl calls on the master side of the pty. - -1999-08-28 Per Bothner - - * fep.c: Initial release. diff --git a/readline/examples/rlfe/ChangeLog.gdb b/readline/examples/rlfe/ChangeLog.gdb deleted file mode 100644 index d75b99eaf3..0000000000 --- a/readline/examples/rlfe/ChangeLog.gdb +++ /dev/null @@ -1,14 +0,0 @@ -2011-05-11 Jan Kratochvil - - Imported readline 6.2, and upstream patch 001. - -2009-08-22 Ralf Wildenhues - - * configure: Regenerate. - - * configure.in: m4_include toplevel config/override.m4. - * configure: Regenerate. - -2009-07-30 Ralf Wildenhues - - * configure.in: Correctly quote AC_PROGRAM_SOURCE definition. diff --git a/readline/examples/rlfe/Makefile.in b/readline/examples/rlfe/Makefile.in deleted file mode 100644 index 7d6fd53a20..0000000000 --- a/readline/examples/rlfe/Makefile.in +++ /dev/null @@ -1,184 +0,0 @@ -# -# Makefile template for rlfe -# -# See machine dependant config.h for more configuration options. -# - -srcdir = @srcdir@ -VPATH = @srcdir@ - -DESTDIR = - -# Where to install screen. - -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -# don't forget to change mandir and infodir in doc/Makefile. -bindir = $(exec_prefix)/bin - -VERSION = @VERSION@ -SCREEN = screen-$(VERSION) - -CC = @CC@ -CFLAGS = @CFLAGS@ -CPPFLAGS = @CPPFLAGS@ -#LDFLAGS = -L$(READLINE_DIR) -LDFLAGS = @LDFLAGS@ -LIBS = -lreadline -lhistory @LIBS@ - -CPP=@CPP@ -CPP_DEPEND=$(CC) -MM - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -AWK = @AWK@ - -OPTIONS= -#OPTIONS= -DDEBUG - -SHELL=/bin/sh - -CFILES= rlfe.c pty.c -HFILES= extern.h os.h screen.h -EXTRA_DIST=configure.in configure Makefile.in config.h.in ChangeLog README -OFILES= rlfe.o pty.o - -all: rlfe - -rlfe: $(OFILES) - $(CC) $(LDFLAGS) -o $@ $(OFILES) $(LIBS) - -rlfe-$(VERSION).tar.gz: - tar czf $@ $(CFILES) $(HFILES) $(EXTRA_DIST) - -.c.o: - $(CC) -c -I. -I$(srcdir) $(CPPFLAGS) $(M_CFLAGS) $(DEFS) $(OPTIONS) $(CFLAGS) $< - -install_bin: .version screen - -if [ -f $(DESTDIR)$(bindir)/$(SCREEN) ] && [ ! -f $(DESTDIR)$(bindir)/$(SCREEN).old ]; \ - then mv $(DESTDIR)$(bindir)/$(SCREEN) $(DESTDIR)$(bindir)/$(SCREEN).old; fi - $(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN) - -chown root $(DESTDIR)$(bindir)/$(SCREEN) && chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN) -# This doesn't work if $(bindir)/screen is a symlink - -if [ -f $(DESTDIR)$(bindir)/screen ] && [ ! -f $(DESTDIR)$(bindir)/screen.old ]; then mv $(DESTDIR)$(bindir)/screen $(DESTDIR)$(bindir)/screen.old; fi - rm -f $(DESTDIR)$(bindir)/screen - (cd $(DESTDIR)$(bindir) && ln -sf $(SCREEN) screen) - cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS) - -uninstall: .version - rm -f $(DESTDIR)$(bindir)/$(SCREEN) - rm -f $(DESTDIR)$(bindir)/screen - -mv $(DESTDIR)$(bindir)/screen.old $(DESTDIR)$(bindir)/screen - rm -f $(DESTDIR)$(ETCSCREENRC) - cd doc; $(MAKE) uninstall - -shadow: - mkdir shadow; - cd shadow; ln -s ../*.[ch] ../*.in ../*.sh ../configure ../doc ../terminfo ../etc . - rm -f shadow/term.h shadow/tty.c shadow/comm.h shadow/osdef.h - echo "install all Makefiles and config:" > shadow/Makefile - echo " rm -f config.cache" >> shadow/Makefile - echo " sh ./configure" >> shadow/Makefile - -term.h: term.c term.sh - AWK=$(AWK) srcdir=$(srcdir) sh $(srcdir)/term.sh - -kmapdef.c: term.h - -tty.c: tty.sh - sh $(srcdir)/tty.sh tty.c - -mostlyclean: - rm -f $(OFILES) rlfe *.o - -clean celan: mostlyclean - rm -f tty.c term.h comm.h osdef.h kmapdef.c core - -# Delete all files from the current directory that are created by -# configuring or building the program. -# building of term.h/comm.h requires awk. Keep it in the distribution -# we keep config.h, as this file knows where 'make dist' finds the ETCSCREENRC. -#distclean: mostlyclean -# rm -f $(SCREEN).tar $(SCREEN).tar.gz -# rm -f config.status Makefile -# rm -f osdef.h doc/Makefile - -maintainer-clean: - @echo "This command is not even intended for maintainers to use;" - @echo "it deletes files that may require special tools to rebuild." - - -# Delete everything from the current directory that can be -# reconstructed with this Makefile. -realclean: .version mostlyclean - rm -f $(SCREEN).tar $(SCREEN).tar.gz - rm -f config.status Makefile doc/Makefile - rm -f tty.c term.h comm.h osdef.h kmapdef.c - rm -f config.h - echo "install all Makefiles and config:" > Makefile - echo " sh ./configure" >> Makefile - -tags TAGS: $(CFILES) - -ctags *.sh $(CFILES) *.h - -ctags -e *.sh $(CFILES) *.h - -dist: .version $(SCREEN).tar.gz - - -# Perform self-tests (if any). -check: - -config: - rm -f config.cache - sh ./configure - - -############################################################################### - -.version: - @rev=`sed < $(srcdir)/patchlevel.h -n -e '/#define REV/s/#define REV *//p'`; \ - vers=`sed < $(srcdir)/patchlevel.h -n -e '/#define VERS/s/#define VERS *//p'`; \ - pat=`sed < $(srcdir)/patchlevel.h -n -e '/#define PATCHLEVEL/s/#define PATCHLEVEL *//p'`; \ - if [ "$${rev}.$${vers}.$${pat}" != "$(VERSION)" ]; then \ - echo "This distribution is screen-$${rev}.$${vers}.$${pat}, but"; \ - echo "the Makefile is from $(VERSION). Please update!"; exit 1; fi - -############################################################################### - -mdepend: $(CFILES) term.h - @rm -f DEPEND ; \ - for i in ${CFILES} ; do \ - echo "$$i" ; \ - echo `echo "$$i" | sed -e 's/.c$$/.o/'`": $$i" `\ - cc -E $$i |\ - grep '^# .*"\./.*\.h"' |\ - (sort -t'"' -u -k 2,2 2>/dev/null || sort -t'"' -u +1 -2) |\ - sed -e 's/.*"\.\/\(.*\)".*/\1/'\ - ` >> DEPEND ; \ - done - -depend: depend.in - ./config.status || ./configure - -depend.in: $(CFILES) term.h - cp Makefile.in Makefile.in~ - sed -e '/\#\#\# Dependencies/q' < Makefile.in > tmp_make - for i in $(CFILES); do echo $$i; $(CPP_DEPEND) $$i >> tmp_make; done - mv tmp_make Makefile.in - -Makefile makefile: config.status $(srcdir)/Makefile.in - CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status - -config.status: $(srcdir)/configure - $(SHELL) ./config.status --recheck - -$(srcdir)/configure: $(srcdir)/configure.in - cd $(srcdir) && autoconf - -############################################################################### - -### Dependencies: -pty.o: pty.c config.h diff --git a/readline/examples/rlfe/README b/readline/examples/rlfe/README deleted file mode 100644 index 9e1f689dc9..0000000000 --- a/readline/examples/rlfe/README +++ /dev/null @@ -1,78 +0,0 @@ -rlfe (ReadLine Front-End) is a "universal wrapper" around readline. -You specify an interactive program to run (typically a shell), and -readline is used to edit input lines. - -There are other such front-ends; what distinguishes this one is that -it monitors the state of the inferior pty, and if the inferior program -switches its terminal to raw mode, then rlfe passes your characters -through directly. This basically means you can run your entire -session (including bash and terminal-mode emacs) under rlfe. - -FEATURES - -* Can use all readline commands (and history) in commands that -read input lines in "canonical mode" - even 'cat'! - -* Automatically switches between "readline-editing mode" and "raw mode" -depending on the terminal mode. If the inferior program invokes -readline itself, it will do its own line editing. (The inferior -readline will not know about rlfe, and it will have its own history.) -You can even run programs like 'emavs -nw' and 'vi' under rlfe. -The goal is you could leave rlfe always on without even knowing -about it. (We're not quite there, but it works tolerably well.) - -* The input line (after any prompt) is changed to bold-face. - -INSTALL - -The usual: ./configure && make && make install - -Note so far rlfe has only been tested on GNU Linux (Fedora Core 2) -and Mac OS X (10.3). - -This assumes readline header files and libraries are in the default -places. If not, you can create a link named readline pointing to the -readline sources. To link with libreadline.a and libhistory.a -you can copy or link them, or add LDFLAGS='-/path/to/readline' to -the make command-line. - -USAGE - -Just run it. That by default runs bash. You can run some other -command by giving it as command-line arguments. - -There are a few tweaks: -h allows you to name the history file, -and -s allows you to specify its size. It default to "emacs" mode, -but if the the environment variable EDITOR is set to "vi" that -mode is chosen. - -ISSUES - -* The mode switching depends on the terminal mode set by the inferior -program. Thus ssh/telnet/screen-type programs will typically be in -raw mode, so rlfe won't be much use, even if remote programs run in -canonical mode. The work-around is to run rlfe on the remote end. - -* Echo supression and prompt recognition are somewhat fragile. -(A protocol so that the o/s tty code can reliably communicate its -state to rlfe could solve this problem, and the previous one.) - -* See the intro to rlfe.c for more notes. - -* Assumes a VT100-compatible terminal, though that could be generalized -if anybody cares. - -* Requires ncurses. - -* It would be useful to integrate rlfe's logic in a terminal emulator. -That would make it easier to reposition the edit position with a mouse, -integrate cut-and-paste with the system clipboard, and more robustly -handle escape sequence and multi-byte characters more robustly. - -AUTHOR - -Per Bothner - -LICENSE - -GPL. diff --git a/readline/examples/rlfe/config.h.in b/readline/examples/rlfe/config.h.in deleted file mode 100644 index a843fecc4a..0000000000 --- a/readline/examples/rlfe/config.h.in +++ /dev/null @@ -1,383 +0,0 @@ -/* Copyright 2004 Per Bothner - * Based on config.h from screen-4.0.2. - * Copyright (c) 1993-2000 - * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) - * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) - * Copyright (c) 1987 Oliver Laumann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program (see the file COPYING); if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - * - **************************************************************** - * $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU - */ - - - - - -/********************************************************************** - * - * User Configuration Section - */ - - -/* - * define PTYMODE if you do not like the default of 0622, which allows - * public write to your pty. - * define PTYGROUP to some numerical group-id if you do not want the - * tty to be in "your" group. - * Note, screen is unable to change mode or group of the pty if it - * is not installed with sufficient privilege. (e.g. set-uid-root) - * define PTYROFS if the /dev/pty devices are mounted on a read-only - * filesystem so screen should not even attempt to set mode or group - * even if running as root (e.g. on TiVo). - */ -#undef PTYMODE -#undef PTYGROUP -#undef PTYROFS - -/* - * If screen is NOT installed set-uid root, screen can provide tty - * security by exclusively locking the ptys. While this keeps other - * users from opening your ptys, it also keeps your own subprocesses - * from being able to open /dev/tty. Define LOCKPTY to add this - * exclusive locking. - */ -#undef LOCKPTY - - -/********************************************************************** - * - * End of User Configuration Section - * - * Rest of this file is modified by 'configure' - * Change at your own risk! - * - */ - -/* - * Some defines to identify special unix variants - */ -#ifndef SVR4 -#undef SVR4 -#endif - -#ifndef _POSIX_SOURCE -#undef _POSIX_SOURCE -#endif - -/* - * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX). - */ -#undef POSIX - -/* - * Define TERMIO if you have struct termio instead of struct sgttyb. - * This is usually the case for SVID systems, where BSD uses sgttyb. - * POSIX systems should define this anyway, even though they use - * struct termios. - */ -#undef TERMIO - -/* - * Define CYTERMIO if you have cyrillic termio modes. - */ -#undef CYTERMIO - -/* - * Define TERMINFO if your machine emulates the termcap routines - * with the terminfo database. - * Thus the .screenrc file is parsed for - * the command 'terminfo' and not 'termcap'. - */ -#undef TERMINFO - -/* - * If your library does not define ospeed, define this. - */ -#undef NEED_OSPEED - -/* - * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX) - */ -#ifndef SYSV -#undef SYSV -#endif - -/* - * Define SIGVOID if your signal handlers return void. On older - * systems, signal returns int, but on newer ones, it returns void. - */ -#undef SIGVOID - -/* - * Define USESIGSET if you have sigset for BSD 4.1 reliable signals. - */ -#undef USESIGSET - -/* - * Define SYSVSIGS if signal handlers must be reinstalled after - * they have been called. - */ -#undef SYSVSIGS - -/* - * Define BSDWAIT if your system defines a 'union wait' in - * - * Only allow BSDWAIT i.e. wait3 on nonposix systems, since - * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl - * - */ -#ifndef POSIX -#undef BSDWAIT -#endif - -/* - * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com - */ -#ifdef BSDWAIT -#undef USE_WAIT2 -#endif - -/* - * Define if you have the utempter utmp helper program - */ -#undef HAVE_UTEMPTER - -/* - * If ttyslot() breaks getlogin() by returning indexes to utmp entries - * of type DEAD_PROCESS, then our getlogin() replacement should be - * selected by defining BUGGYGETLOGIN. - */ -#undef BUGGYGETLOGIN - -/* - * If your system has the calls setreuid() and setregid(), - * define HAVE_SETREUID. Otherwise screen will use a forked process to - * safely create output files without retaining any special privileges. - */ -#undef HAVE_SETREUID - -/* - * If your system supports BSD4.4's seteuid() and setegid(), define - * HAVE_SETEUID. - */ -#undef HAVE_SETEUID - -/* - * If you want the "time" command to display the current load average - * define LOADAV. Maybe you must install screen with the needed - * privileges to read /dev/kmem. - * Note that NLIST_ stuff is only checked, when getloadavg() is not available. - */ -#undef LOADAV - -#undef LOADAV_NUM -#undef LOADAV_TYPE -#undef LOADAV_SCALE -#undef LOADAV_GETLOADAVG -#undef LOADAV_UNIX -#undef LOADAV_AVENRUN -#undef LOADAV_USE_NLIST64 - -#undef NLIST_DECLARED -#undef NLIST_STRUCT -#undef NLIST_NAME_UNION - -/* - * If your system has the new format /etc/ttys (like 4.3 BSD) and the - * getttyent(3) library functions, define GETTTYENT. - */ -#undef GETTTYENT - -/* - * Define USEBCOPY if the bcopy/memcpy from your system's C library - * supports the overlapping of source and destination blocks. When - * undefined, screen uses its own (probably slower) version of bcopy(). - * - * SYSV machines may have a working memcpy() -- Oh, this is - * quite unlikely. Tell me if you see one. - * "But then, memmove() should work, if at all available" he thought... - * Boing, never say "works everywhere" unless you checked SCO UNIX. - * Their memove fails the test in the configure script. Sigh. (Juergen) - */ -#undef USEBCOPY -#undef USEMEMCPY -#undef USEMEMMOVE - -/* - * If your system has vsprintf() and requires the use of the macros in - * "varargs.h" to use functions with variable arguments, - * define USEVARARGS. - */ -#undef USEVARARGS - -/* - * If your system has strerror() define this. - */ -#undef HAVE_STRERROR - -/* - * If the select return value doesn't treat a descriptor that is - * usable for reading and writing as two hits, define SELECT_BROKEN. - */ -#undef SELECT_BROKEN - -/* - * Define this if your system supports named pipes. - */ -#undef NAMEDPIPE - -/* - * Define this if your system exits select() immediatly if a pipe is - * opened read-only and no writer has opened it. - */ -#undef BROKEN_PIPE - -/* - * Define this if the unix-domain socket implementation doesn't - * create a socket in the filesystem. - */ -#undef SOCK_NOT_IN_FS - -/* - * If your system has setenv() and unsetenv() define USESETENV - */ -#undef USESETENV - -/* - * If your system does not come with a setenv()/putenv()/getenv() - * functions, you may bring in our own code by defining NEEDPUTENV. - */ -#undef NEEDPUTENV - -/* - * If the passwords are stored in a shadow file and you want the - * builtin lock to work properly, define SHADOWPW. - */ -#undef SHADOWPW - -/* - * If you are on a SYS V machine that restricts filename length to 14 - * characters, you may need to enforce that by setting NAME_MAX to 14 - */ -#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */ -#undef NAME_MAX - -/* - * define HAVE_RENAME if your system has a rename() function - */ -#undef HAVE_RENAME - -/* - * define HAVE__EXIT if your system has the _exit() call. - */ -#undef HAVE__EXIT - -/* - * define HAVE_LSTAT if your system has symlinks and the lstat() call. - */ -#undef HAVE_LSTAT - -/* - * define HAVE_UTIMES if your system has the utimes() call. - */ -#undef HAVE_UTIMES - -/* - * define HAVE_FCHOWN if your system has the fchown() call. - */ -#undef HAVE_FCHOWN - -/* - * define HAVE_FCHMOD if your system has the fchmod() call. - */ -#undef HAVE_FCHMOD - -/* - * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib). - */ -#undef HAVE_VSNPRINTF - -/* - * define HAVE_GETCWD if your system has the getcwd() call. - */ -#undef HAVE_GETCWD - -/* - * define HAVE_SETLOCALE if your system has the setlocale() call. - */ -#undef HAVE_SETLOCALE - -/* - * define HAVE_STRFTIME if your system has the strftime() call. - */ -#undef HAVE_STRFTIME - -/* - * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call - * and defines CODESET. - */ -#undef HAVE_NL_LANGINFO - -/* - * Newer versions of Solaris include fdwalk, which can greatly improve - * the startup time of screen; otherwise screen spends a lot of time - * closing file descriptors. - */ -#undef HAVE_FDWALK - -/* - * define HAVE_DEV_PTC if you have a /dev/ptc character special - * device. - */ -#undef HAVE_DEV_PTC - -/* - * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special - * device and support the ptsname(), grantpt(), unlockpt() functions. - */ -#undef HAVE_SVR4_PTYS - -/* - * define HAVE_GETPT if you have the getpt() function. - */ -#undef HAVE_GETPT - -/* - * define HAVE_OPENPTY if your system has the openpty() call. - */ -#undef HAVE_OPENPTY - -/* - * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen - * to unusual environments. E.g. For SunOs the defaults are "qpr" and - * "0123456789abcdef". For SunOs 4.1.2 - * #define PTYRANGE0 "pqrstuvwxyzPQRST" - * is recommended by Dan Jacobson. - */ -#undef PTYRANGE0 -#undef PTYRANGE1 - -#define USEVARARGS - -#undef HAVE_SYS_STROPTS_H - -#undef HAVE_SYS_WAIT_H - -#undef HAVE_SGTTY_H - -#undef HAVE_SYS_SELECT_H diff --git a/readline/examples/rlfe/configure b/readline/examples/rlfe/configure deleted file mode 100755 index b6d9b5be46..0000000000 --- a/readline/examples/rlfe/configure +++ /dev/null @@ -1,5645 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69. -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME= -PACKAGE_TARNAME= -PACKAGE_VERSION= -PACKAGE_STRING= -PACKAGE_BUGREPORT= -PACKAGE_URL= - -ac_unique_file="rlfe.c" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='LTLIBOBJS -LIBOBJS -XTERMPATH -WRITEPATH -AWK -EGREP -GREP -CPP -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -VERSION -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -with_pty_mode -with_pty_group -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures this package to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF -_ACEOF -fi - -if test -n "$ac_init_help"; then - - cat <<\_ACEOF - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pty-mode=mode default mode for ptys - --with-pty-group=group default group for ptys - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to the package provider. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -configure -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by $as_me, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - -ac_config_headers="$ac_config_headers config.h" - -VERSION=0.4 - - - -old_CFLAGS="$CFLAGS" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -if test $ac_cv_c_compiler_gnu = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 -$as_echo_n "checking whether $CC needs -traditional... " >&6; } -if ${ac_cv_prog_gcc_traditional+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_pattern="Autoconf.*'x'" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TIOCGETP -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -else - ac_cv_prog_gcc_traditional=no -fi -rm -f conftest* - - - if test $ac_cv_prog_gcc_traditional = no; then - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -Autoconf TCGETA -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "$ac_pattern" >/dev/null 2>&1; then : - ac_cv_prog_gcc_traditional=yes -fi -rm -f conftest* - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 -$as_echo "$ac_cv_prog_gcc_traditional" >&6; } - if test $ac_cv_prog_gcc_traditional = yes; then - CC="$CC -traditional" - fi -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 -$as_echo_n "checking for library containing strerror... " >&6; } -if ${ac_cv_search_strerror+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char strerror (); -int -main () -{ -return strerror (); - ; - return 0; -} -_ACEOF -for ac_lib in '' cposix; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_strerror=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_strerror+:} false; then : - break -fi -done -if ${ac_cv_search_strerror+:} false; then : - -else - ac_cv_search_strerror=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 -$as_echo "$ac_cv_search_strerror" >&6; } -ac_res=$ac_cv_search_strerror -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - - -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -main(){exit(0);} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - -if test $CC != cc ; then -echo "Your $CC failed - restarting with CC=cc" 1>&6 - -echo "" 1>&6 - -CC=cc -export CC -exec $0 $configure_args -fi - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -main(){exit(0);} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - exec 5>&2 -eval $ac_link -echo "CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;" 1>&6 - -echo "$ac_compile" 1>&6 - -as_fn_error $? "Can't run the compiler - sorry" "$LINENO" 5 -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -main() -{ - int __something_strange_(); - __something_strange_(0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - as_fn_error $? "Your compiler does not set the exit status - sorry" "$LINENO" 5 -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - - -if test -f etc/toolcheck; then -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for buggy tools..." >&5 -$as_echo "$as_me: checking for buggy tools..." >&6;} -sh etc/toolcheck 1>&6 -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System V..." >&5 -$as_echo "$as_me: checking for System V..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -int -main () -{ -int x = SIGCHLD | FNDELAY; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - $as_echo "#define SYSV 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris 2.x..." >&5 -$as_echo "$as_me: checking for Solaris 2.x..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#if defined(SVR4) && defined(sun) - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then : - LIBS="$LIBS -lsocket -lnsl -lkstat" -fi -rm -f conftest* - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select..." >&5 -$as_echo "$as_me: checking select..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -select(0, 0, 0, 0, 0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - LIBS="$LIBS -lnet -lnsl" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select with $LIBS..." >&5 -$as_echo "$as_me: checking select with $LIBS..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -select(0, 0, 0, 0, 0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - as_fn_error $? "!!! no select - no screen" "$LINENO" 5 -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select return value..." >&5 -$as_echo "$as_me: checking select return value..." >&6;} -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -#include - -char *nam = "/tmp/conftest$$"; - -#ifdef NAMEDPIPE - -#ifndef O_NONBLOCK -#define O_NONBLOCK O_NDELAY -#endif -#ifndef S_IFIFO -#define S_IFIFO 0010000 -#endif - - -main() -{ -#ifdef FD_SET - fd_set f; -#else - int f; -#endif - -#ifdef __FreeBSD__ -/* From Andrew A. Chernov (ache@astral.msk.su): - * opening RDWR fifo fails in BSD 4.4, but select return values are - * right. - */ - exit(0); -#endif - (void)alarm(5); -#ifdef POSIX - if (mkfifo(nam, 0777)) -#else - if (mknod(nam, S_IFIFO|0777, 0)) -#endif - exit(1); - close(0); - if (open(nam, O_RDWR | O_NONBLOCK)) - exit(1); - if (write(0, "TEST", 4) == -1) - exit(1); - -#else - -#include -#include -#include - -main() -{ - int s1, s2, l; - struct sockaddr_un a; -#ifdef FD_SET - fd_set f; -#else - int f; -#endif - - (void)alarm(5); - if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) - exit(1); - a.sun_family = AF_UNIX; - strcpy(a.sun_path, nam); - (void) unlink(nam); - if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1) - exit(1); - if (listen(s1, 2)) - exit(1); - if (fork() == 0) - { - if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) - kill(getppid(), 3); - (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2); - if (write(s2, "HELLO", 5) == -1) - kill(getppid(), 3); - exit(0); - } - l = sizeof(a); - close(0); - if (accept(s1, (struct sockaddr *)&a, &l)) - exit(1); -#endif - - -#ifdef FD_SET - FD_SET(0, &f); -#else - f = 1; -#endif - if (select(1, &f, 0, 0, 0) == -1) - exit(1); - if (select(1, &f, &f, 0, 0) != 2) - exit(1); - exit(0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo "- select is ok" 1>&6 - -else - echo "- select can't count" 1>&6 - $as_echo "#define SELECT_BROKEN 1" >>confdefs.h - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent..." >&5 -$as_echo "$as_me: checking for tgetent..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -tgetent((char *)0, (char *)0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - olibs="$LIBS" -LIBS="-lcurses $olibs" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libcurses..." >&5 -$as_echo "$as_me: checking libcurses..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifdef __hpux -__sorry_hpux_libcurses_is_totally_broken_in_10_10(); -#else -tgetent((char *)0, (char *)0); -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - LIBS="-ltermcap $olibs" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermcap..." >&5 -$as_echo "$as_me: checking libtermcap..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -tgetent((char *)0, (char *)0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - LIBS="-ltermlib $olibs" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermlib..." >&5 -$as_echo "$as_me: checking libtermlib..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -tgetent((char *)0, (char *)0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - LIBS="-lncurses $olibs" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libncurses..." >&5 -$as_echo "$as_me: checking libncurses..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -tgetent((char *)0, (char *)0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - as_fn_error $? "!!! no tgetent - no screen" "$LINENO" 5 -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -extern char *tgoto(); -main() -{ - exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1); -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo "- you use the termcap database" 1>&6 - -else - echo "- you use the terminfo database" 1>&6 - $as_echo "#define TERMINFO 1" >>confdefs.h - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking ospeed..." >&5 -$as_echo "$as_me: checking ospeed..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -extern short ospeed; -int -main () -{ -ospeed=5; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -else - $as_echo "#define NEED_OSPEED 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /dev/ptc..." >&5 -$as_echo "$as_me: checking for /dev/ptc..." >&6;} -if test -r /dev/ptc; then -$as_echo "#define HAVE_DEV_PTC 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SVR4 ptys..." >&5 -$as_echo "$as_me: checking for SVR4 ptys..." >&6;} -sysvr4ptys= -if test -c /dev/ptmx ; then -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -ptsname(0);grantpt(0);unlockpt(0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - $as_echo "#define HAVE_SVR4_PTYS 1" >>confdefs.h - -sysvr4ptys=1 -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi - -for ac_func in getpt -do : - ac_fn_c_check_func "$LINENO" "getpt" "ac_cv_func_getpt" -if test "x$ac_cv_func_getpt" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_GETPT 1 -_ACEOF - -fi -done - - -if test -z "$sysvr4ptys"; then -for ac_func in openpty -do : - ac_fn_c_check_func "$LINENO" "openpty" "ac_cv_func_openpty" -if test "x$ac_cv_func_openpty" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_OPENPTY 1 -_ACEOF - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for openpty in -lutil" >&5 -$as_echo_n "checking for openpty in -lutil... " >&6; } -if ${ac_cv_lib_util_openpty+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lutil $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char openpty (); -int -main () -{ -return openpty (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_util_openpty=yes -else - ac_cv_lib_util_openpty=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_openpty" >&5 -$as_echo "$ac_cv_lib_util_openpty" >&6; } -if test "x$ac_cv_lib_util_openpty" = xyes; then : - $as_echo "#define HAVE_OPENPTY 1" >>confdefs.h - LIBS="$LIBS -lutil" -fi - -fi -done - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ptyranges..." >&5 -$as_echo "$as_me: checking for ptyranges..." >&6;} -if test -d /dev/ptym ; then -pdir='/dev/ptym' -else -pdir='/dev' -fi -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef M_UNIX - yes; -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then : - ptys=`echo /dev/ptyp??` -else - ptys=`echo $pdir/pty??` -fi -rm -f conftest* - -if test "$ptys" != "$pdir/pty??" ; then -p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'` -p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'` -cat >>confdefs.h <<_ACEOF -#define PTYRANGE0 "$p0" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PTYRANGE1 "$p1" -_ACEOF - -fi - - -# Check whether --with-pty-mode was given. -if test "${with_pty_mode+set}" = set; then : - withval=$with_pty_mode; ptymode="${withval}" -fi - - -# Check whether --with-pty-group was given. -if test "${with_pty_group+set}" = set; then : - withval=$with_pty_group; ptygrp="${withval}" -fi - -test -n "$ptymode" || ptymode=0620 -if test -n "$ptygrp" ; then -cat >>confdefs.h <<_ACEOF -#define PTYMODE $ptymode -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PTYGROUP $ptygrp -_ACEOF - -else - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking default tty permissions/group..." >&5 -$as_echo "$as_me: checking default tty permissions/group..." >&6;} -rm -f conftest_grp -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include -#include -main() -{ - struct stat sb; - char *x,*ttyname(); - int om, m; - FILE *fp; - - if (!(x = ttyname(0))) exit(1); - if (stat(x, &sb)) exit(1); - om = sb.st_mode; - if (om & 002) exit(0); - m = system("mesg y"); - if (m == -1 || m == 127) exit(1); - if (stat(x, &sb)) exit(1); - m = sb.st_mode; - if (chmod(x, om)) exit(1); - if (m & 002) exit(0); - if (sb.st_gid == getgid()) exit(1); - if (!(fp=fopen("conftest_grp", "w"))) - exit(1); - fprintf(fp, "%d\n", sb.st_gid); - fclose(fp); - exit(0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - - if test -f conftest_grp; then - ptygrp=`cat conftest_grp` - echo "- pty mode: $ptymode, group: $ptygrp" 1>&6 - - cat >>confdefs.h <<_ACEOF -#define PTYMODE $ptymode -_ACEOF - - cat >>confdefs.h <<_ACEOF -#define PTYGROUP $ptygrp -_ACEOF - - else - echo "- ptys are world accessable" 1>&6 - - fi - -else - - WRITEPATH='' - XTERMPATH='' - # Extract the first word of "write", so it can be a program name with args. -set dummy write; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_WRITEPATH+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $WRITEPATH in - [\\/]* | ?:[\\/]*) - ac_cv_path_WRITEPATH="$WRITEPATH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_WRITEPATH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -WRITEPATH=$ac_cv_path_WRITEPATH -if test -n "$WRITEPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WRITEPATH" >&5 -$as_echo "$WRITEPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - # Extract the first word of "xterm", so it can be a program name with args. -set dummy xterm; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_path_XTERMPATH+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $XTERMPATH in - [\\/]* | ?:[\\/]*) - ac_cv_path_XTERMPATH="$XTERMPATH" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_path_XTERMPATH="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -XTERMPATH=$ac_cv_path_XTERMPATH -if test -n "$XTERMPATH"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XTERMPATH" >&5 -$as_echo "$XTERMPATH" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - found= - if test -n "$WRITEPATH$XTERMPATH"; then - findfollow= - lsfollow= - found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null` - if test -n "$found"; then - findfollow=-follow - lsfollow=L - fi - if test -n "$XTERMPATH"; then - ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'` - if test tty != "$ptygrpn"; then - XTERMPATH= - fi - fi - fi - if test -n "$WRITEPATH$XTERMPATH"; then - found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print` - if test -n "$found"; then - ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'` - echo "- pty mode: $ptymode, group: $ptygrp" 1>&6 - - cat >>confdefs.h <<_ACEOF -#define PTYMODE $ptymode -_ACEOF - - cat >>confdefs.h <<_ACEOF -#define PTYGROUP $ptygrp -_ACEOF - - else - echo "- ptys are world accessable" 1>&6 - - fi - else - echo "- can't determine - assume ptys are world accessable" 1>&6 - - fi - - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -rm -f conftest_grp -fi - -if test -n "$posix" ; then - -echo "assuming posix signal definition" 1>&6 - -$as_echo "#define SIGVOID 1" >>confdefs.h - - -else - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers..." >&5 -$as_echo "$as_me: checking return type of signal handlers..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#ifdef signal -#undef signal -#endif -extern void (*signal ()) (); -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - $as_echo "#define SIGVOID 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sigset..." >&5 -$as_echo "$as_me: checking sigset..." >&6;} -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -int -main () -{ - -#ifdef SIGVOID -sigset(0, (void (*)())0); -#else -sigset(0, (int (*)())0); -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - $as_echo "#define USESIGSET 1" >>confdefs.h - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking signal implementation..." >&5 -$as_echo "$as_me: checking signal implementation..." >&6;} -if test "$cross_compiling" = yes; then : - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run test program while cross compiling -See \`config.log' for more details" "$LINENO" 5; } -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include -#include - -#ifndef SIGCLD -#define SIGCLD SIGCHLD -#endif -#ifdef USESIGSET -#define signal sigset -#endif - -int got; - -#ifdef SIGVOID -void -#endif -hand() -{ - got++; -} - -main() -{ - /* on hpux we use sigvec to get bsd signals */ -#ifdef __hpux - (void)signal(SIGCLD, hand); - kill(getpid(), SIGCLD); - kill(getpid(), SIGCLD); - if (got < 2) - exit(1); -#endif - exit(0); -} - -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - $as_echo "#define SYSVSIGS 1" >>confdefs.h - -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in sys/stropts.h sys/wait.h sgtty.h sys/select.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -for ac_header in term.h -do : - ac_fn_c_check_header_mongrel "$LINENO" "term.h" "ac_cv_header_term_h" "$ac_includes_default" -if test "x$ac_cv_header_term_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_TERM_H 1 -_ACEOF - -fi - -done - - -ac_config_files="$ac_config_files Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by $as_me, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Report bugs to the package provider." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -config.status -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi - ;; - - - esac - -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/readline/examples/rlfe/configure.in b/readline/examples/rlfe/configure.in deleted file mode 100644 index 5c0678ab4d..0000000000 --- a/readline/examples/rlfe/configure.in +++ /dev/null @@ -1,444 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. - -m4_include([../../../config/override.m4]) - -AC_INIT(rlfe.c) -AC_CONFIG_HEADER(config.h) -VERSION=0.4 -AC_SUBST(VERSION) - -dnl -dnl Define some useful macros -dnl -AC_DEFUN([AC_PROGRAM_SOURCE], -[AC_REQUIRE([AC_PROG_CPP])AC_PROVIDE([$0])cat > conftest.c <&5 | sed -e '1,/_CUT_HERE_/d' -e 's/ //g' > conftest.out" -. ./conftest.out -rm -f conftest* -])dnl -dnl -define(AC_NOTE, -[echo "$1" 1>&AC_FD_MSG -])dnl - -old_CFLAGS="$CFLAGS" -AC_PROG_CC -AC_PROG_CPP -AC_PROG_GCC_TRADITIONAL -AC_ISC_POSIX - -AC_TRY_RUN(main(){exit(0);},,[ -if test $CC != cc ; then -AC_NOTE(Your $CC failed - restarting with CC=cc) -AC_NOTE() -CC=cc -export CC -exec $0 $configure_args -fi -]) - -AC_TRY_RUN(main(){exit(0);},, -exec 5>&2 -eval $ac_link -AC_NOTE(CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;) -AC_NOTE($ac_compile) -AC_MSG_ERROR(Can't run the compiler - sorry)) - -AC_TRY_RUN([ -main() -{ - int __something_strange_(); - __something_strange_(0); -} -],AC_MSG_ERROR(Your compiler does not set the exit status - sorry)) - -AC_PROG_AWK - -if test -f etc/toolcheck; then -AC_CHECKING(for buggy tools) -sh etc/toolcheck 1>&AC_FD_MSG -fi - -dnl -dnl **** special unix variants **** -dnl - -AC_CHECKING(for System V) -AC_TRY_COMPILE( -[#include -#include -#include ], [int x = SIGCHLD | FNDELAY;], , AC_DEFINE(SYSV)) - -AC_CHECKING(for Solaris 2.x) -AC_EGREP_CPP(yes, -[#if defined(SVR4) && defined(sun) - yes -#endif -], LIBS="$LIBS -lsocket -lnsl -lkstat") - -dnl -dnl **** select() **** -dnl - -AC_CHECKING(select) -AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],, -LIBS="$LIBS -lnet -lnsl" -AC_CHECKING(select with $LIBS) -AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],, -AC_MSG_ERROR(!!! no select - no screen)) -) -dnl -dnl **** check the select implementation **** -dnl - -AC_CHECKING(select return value) -AC_TRY_RUN([ -#include -#include -#include - -char *nam = "/tmp/conftest$$"; - -#ifdef NAMEDPIPE - -#ifndef O_NONBLOCK -#define O_NONBLOCK O_NDELAY -#endif -#ifndef S_IFIFO -#define S_IFIFO 0010000 -#endif - - -main() -{ -#ifdef FD_SET - fd_set f; -#else - int f; -#endif - -#ifdef __FreeBSD__ -/* From Andrew A. Chernov (ache@astral.msk.su): - * opening RDWR fifo fails in BSD 4.4, but select return values are - * right. - */ - exit(0); -#endif - (void)alarm(5); -#ifdef POSIX - if (mkfifo(nam, 0777)) -#else - if (mknod(nam, S_IFIFO|0777, 0)) -#endif - exit(1); - close(0); - if (open(nam, O_RDWR | O_NONBLOCK)) - exit(1); - if (write(0, "TEST", 4) == -1) - exit(1); - -#else - -#include -#include -#include - -main() -{ - int s1, s2, l; - struct sockaddr_un a; -#ifdef FD_SET - fd_set f; -#else - int f; -#endif - - (void)alarm(5); - if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) - exit(1); - a.sun_family = AF_UNIX; - strcpy(a.sun_path, nam); - (void) unlink(nam); - if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1) - exit(1); - if (listen(s1, 2)) - exit(1); - if (fork() == 0) - { - if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) - kill(getppid(), 3); - (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2); - if (write(s2, "HELLO", 5) == -1) - kill(getppid(), 3); - exit(0); - } - l = sizeof(a); - close(0); - if (accept(s1, (struct sockaddr *)&a, &l)) - exit(1); -#endif - - -#ifdef FD_SET - FD_SET(0, &f); -#else - f = 1; -#endif - if (select(1, &f, 0, 0, 0) == -1) - exit(1); - if (select(1, &f, &f, 0, 0) != 2) - exit(1); - exit(0); -} -],AC_NOTE(- select is ok), -AC_NOTE(- select can't count) AC_DEFINE(SELECT_BROKEN)) - -dnl -dnl **** termcap or terminfo **** -dnl -AC_CHECKING(for tgetent) -AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, -olibs="$LIBS" -LIBS="-lcurses $olibs" -AC_CHECKING(libcurses) -AC_TRY_LINK(,[ -#ifdef __hpux -__sorry_hpux_libcurses_is_totally_broken_in_10_10(); -#else -tgetent((char *)0, (char *)0); -#endif -],, -LIBS="-ltermcap $olibs" -AC_CHECKING(libtermcap) -AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, -LIBS="-ltermlib $olibs" -AC_CHECKING(libtermlib) -AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, -LIBS="-lncurses $olibs" -AC_CHECKING(libncurses) -AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, -AC_MSG_ERROR(!!! no tgetent - no screen)))))) - -AC_TRY_RUN([ -extern char *tgoto(); -main() -{ - exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1); -}], AC_NOTE(- you use the termcap database), -AC_NOTE(- you use the terminfo database) AC_DEFINE(TERMINFO)) -AC_CHECKING(ospeed) -AC_TRY_LINK(extern short ospeed;,ospeed=5;,,AC_DEFINE(NEED_OSPEED)) - -dnl -dnl **** PTY specific things **** -dnl -AC_CHECKING(for /dev/ptc) -if test -r /dev/ptc; then -AC_DEFINE(HAVE_DEV_PTC) -fi - -AC_CHECKING(for SVR4 ptys) -sysvr4ptys= -if test -c /dev/ptmx ; then -AC_TRY_LINK([],[ptsname(0);grantpt(0);unlockpt(0);],[AC_DEFINE(HAVE_SVR4_PTYS) -sysvr4ptys=1]) -fi - -AC_CHECK_FUNCS(getpt) - -dnl check for openpty() -if test -z "$sysvr4ptys"; then -AC_CHECK_FUNCS(openpty,, -[AC_CHECK_LIB(util,openpty, [AC_DEFINE(HAVE_OPENPTY)] [LIBS="$LIBS -lutil"])]) -fi - -AC_CHECKING(for ptyranges) -if test -d /dev/ptym ; then -pdir='/dev/ptym' -else -pdir='/dev' -fi -dnl SCO uses ptyp%d -AC_EGREP_CPP(yes, -[#ifdef M_UNIX - yes; -#endif -], ptys=`echo /dev/ptyp??`, ptys=`echo $pdir/pty??`) -dnl if test -c /dev/ptyp19; then -dnl ptys=`echo /dev/ptyp??` -dnl else -dnl ptys=`echo $pdir/pty??` -dnl fi -if test "$ptys" != "$pdir/pty??" ; then -p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'` -p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'` -AC_DEFINE_UNQUOTED(PTYRANGE0,"$p0") -AC_DEFINE_UNQUOTED(PTYRANGE1,"$p1") -fi - -dnl **** pty mode/group handling **** -dnl -dnl support provided by Luke Mewburn , 931222 -AC_ARG_WITH(pty-mode, [ --with-pty-mode=mode default mode for ptys], [ ptymode="${withval}" ]) -AC_ARG_WITH(pty-group, [ --with-pty-group=group default group for ptys], [ ptygrp="${withval}" ]) -test -n "$ptymode" || ptymode=0620 -if test -n "$ptygrp" ; then -AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) -AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) -else - -AC_CHECKING(default tty permissions/group) -rm -f conftest_grp -AC_TRY_RUN([ -#include -#include -#include -main() -{ - struct stat sb; - char *x,*ttyname(); - int om, m; - FILE *fp; - - if (!(x = ttyname(0))) exit(1); - if (stat(x, &sb)) exit(1); - om = sb.st_mode; - if (om & 002) exit(0); - m = system("mesg y"); - if (m == -1 || m == 127) exit(1); - if (stat(x, &sb)) exit(1); - m = sb.st_mode; - if (chmod(x, om)) exit(1); - if (m & 002) exit(0); - if (sb.st_gid == getgid()) exit(1); - if (!(fp=fopen("conftest_grp", "w"))) - exit(1); - fprintf(fp, "%d\n", sb.st_gid); - fclose(fp); - exit(0); -} -],[ - if test -f conftest_grp; then - ptygrp=`cat conftest_grp` - AC_NOTE([- pty mode: $ptymode, group: $ptygrp]) - AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) - AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) - else - AC_NOTE(- ptys are world accessable) - fi -],[ - WRITEPATH='' - XTERMPATH='' - AC_PATH_PROG(WRITEPATH, write) - AC_PATH_PROG(XTERMPATH, xterm) - found= - if test -n "$WRITEPATH$XTERMPATH"; then - findfollow= - lsfollow= - found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null` - if test -n "$found"; then - findfollow=-follow - lsfollow=L - fi - if test -n "$XTERMPATH"; then - ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'` - if test tty != "$ptygrpn"; then - XTERMPATH= - fi - fi - fi - if test -n "$WRITEPATH$XTERMPATH"; then - found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print` - if test -n "$found"; then - ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'` - AC_NOTE([- pty mode: $ptymode, group: $ptygrp]) - AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) - AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) - else - AC_NOTE(- ptys are world accessable) - fi - else - AC_NOTE(- can't determine - assume ptys are world accessable) - fi - ] -) -rm -f conftest_grp -fi - -dnl -dnl **** signal handling **** -dnl -if test -n "$posix" ; then - -dnl POSIX has reliable signals with void return type. -AC_NOTE(assuming posix signal definition) -AC_DEFINE(SIGVOID) - -else - -AC_CHECKING(return type of signal handlers) -AC_TRY_COMPILE( -[#include -#include -#ifdef signal -#undef signal -#endif -extern void (*signal ()) ();], [int i;], AC_DEFINE(SIGVOID)) -AC_CHECKING(sigset) -AC_TRY_LINK([ -#include -#include -],[ -#ifdef SIGVOID -sigset(0, (void (*)())0); -#else -sigset(0, (int (*)())0); -#endif -], AC_DEFINE(USESIGSET)) -AC_CHECKING(signal implementation) -AC_TRY_RUN([ -#include -#include - -#ifndef SIGCLD -#define SIGCLD SIGCHLD -#endif -#ifdef USESIGSET -#define signal sigset -#endif - -int got; - -#ifdef SIGVOID -void -#endif -hand() -{ - got++; -} - -main() -{ - /* on hpux we use sigvec to get bsd signals */ -#ifdef __hpux - (void)signal(SIGCLD, hand); - kill(getpid(), SIGCLD); - kill(getpid(), SIGCLD); - if (got < 2) - exit(1); -#endif - exit(0); -} -],,AC_DEFINE(SYSVSIGS)) - -fi - -AC_CHECK_HEADERS(sys/stropts.h sys/wait.h sgtty.h sys/select.h) -AC_CHECK_HEADERS(term.h) - -AC_OUTPUT(Makefile) diff --git a/readline/examples/rlfe/extern.h b/readline/examples/rlfe/extern.h deleted file mode 100644 index 2fe50250cc..0000000000 --- a/readline/examples/rlfe/extern.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright (c) 1993-2002 - * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) - * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) - * Copyright (c) 1987 Oliver Laumann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program (see the file COPYING); if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - * - **************************************************************** - * $Id: extern.h,v 1.18 1994/05/31 12:31:57 mlschroe Exp $ FAU - */ - -#if !defined(__GNUC__) || __GNUC__ < 2 -#undef __attribute__ -#define __attribute__(x) -#endif - -#if !defined (__P) -# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) -# define __P(protos) protos -# else -# define __P(protos) () -# endif -#endif - -/* pty.c */ -extern int OpenPTY __P((char **)); -extern void InitPTY __P((int)); diff --git a/readline/examples/rlfe/os.h b/readline/examples/rlfe/os.h deleted file mode 100644 index df06c75809..0000000000 --- a/readline/examples/rlfe/os.h +++ /dev/null @@ -1,531 +0,0 @@ -/* Copyright (c) 1993-2002 - * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) - * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) - * Copyright (c) 1987 Oliver Laumann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program (see the file COPYING); if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - * - **************************************************************** - * $Id: os.h,v 1.10 1994/05/31 12:32:22 mlschroe Exp $ FAU - */ - -#include -#include - -#include - -/* In strict ANSI mode, HP-UX machines define __hpux but not hpux */ -#if defined(__hpux) && !defined(hpux) -# define hpux -#endif - -#if defined(__bsdi__) || defined(__386BSD__) || defined(_CX_UX) || defined(hpux) || defined(_IBMR2) || defined(linux) -# include -#endif /* __bsdi__ || __386BSD__ || _CX_UX || hpux || _IBMR2 || linux */ - -#ifdef ISC -# ifdef ENAMETOOLONG -# undef ENAMETOOLONG -# endif -# ifdef ENOTEMPTY -# undef ENOTEMPTY -# endif -# include -# include -#endif - -#ifdef sun -# define getpgrp __getpgrp -# define exit __exit -#endif -#ifdef POSIX -# include -# if defined(__STDC__) -# include -# endif /* __STDC__ */ -#endif /* POSIX */ -#ifdef sun -# undef getpgrp -# undef exit -#endif /* sun */ - -#ifndef linux /* all done in */ -extern int errno; -#endif /* linux */ -#ifndef HAVE_STRERROR -/* No macros, please */ -#undef strerror -#endif - -#if !defined(SYSV) && !defined(linux) -# ifdef NEWSOS -# define strlen ___strlen___ -# include -# undef strlen -# else /* NEWSOS */ -# include -# endif /* NEWSOS */ -#else /* SYSV */ -# if defined(SVR4) || defined(NEWSOS) -# define strlen ___strlen___ -# include -# undef strlen -# if !defined(NEWSOS) && !defined(__hpux) - extern size_t strlen(const char *); -# endif -# else /* SVR4 */ -# include -# endif /* SVR4 */ -#endif /* SYSV */ - -#ifdef USEVARARGS -# if defined(__STDC__) -# include -# define VA_LIST(var) va_list var; -# define VA_DOTS ... -# define VA_DECL -# define VA_START(ap, fmt) va_start(ap, fmt) -# define VA_ARGS(ap) ap -# define VA_END(ap) va_end(ap) -# else -# include -# define VA_LIST(var) va_list var; -# define VA_DOTS va_alist -# define VA_DECL va_dcl -# define VA_START(ap, fmt) va_start(ap) -# define VA_ARGS(ap) ap -# define VA_END(ap) va_end(ap) -# endif -#else -# define VA_LIST(var) -# define VA_DOTS p1, p2, p3, p4, p5, p6 -# define VA_DECL unsigned long VA_DOTS; -# define VA_START(ap, fmt) -# define VA_ARGS(ap) VA_DOTS -# define VA_END(ap) -# undef vsnprintf -# define vsnprintf xsnprintf -#endif - -#if !defined(sun) && !defined(B43) && !defined(ISC) && !defined(pyr) && !defined(_CX_UX) -# include -#endif -#include - -#ifdef M_UNIX /* SCO */ -# include -# include -# define ftruncate(fd, s) chsize(fd, s) -#endif - -#ifdef SYSV -# define index strchr -# define rindex strrchr -# define bzero(poi,len) memset(poi,0,len) -# define bcmp memcmp -# define killpg(pgrp,sig) kill( -(pgrp), sig) -#endif - -#ifndef HAVE_GETCWD -# define getcwd(b,l) getwd(b) -#endif - -#ifndef USEBCOPY -# ifdef USEMEMMOVE -# define bcopy(s,d,len) memmove(d,s,len) -# else -# ifdef USEMEMCPY -# define bcopy(s,d,len) memcpy(d,s,len) -# else -# define NEED_OWN_BCOPY -# define bcopy xbcopy -# endif -# endif -#endif - -#ifdef hpux -# define setreuid(ruid, euid) setresuid(ruid, euid, -1) -# define setregid(rgid, egid) setresgid(rgid, egid, -1) -#endif - -#if defined(HAVE_SETEUID) || defined(HAVE_SETREUID) -# define USE_SETEUID -#endif - -#if !defined(HAVE__EXIT) && !defined(_exit) -#define _exit(x) exit(x) -#endif - -#ifndef HAVE_UTIMES -# define utimes utime -#endif - -#ifdef BUILTIN_TELNET -# include -# include -#endif - -#if defined(USE_LOCALE) && (!defined(HAVE_SETLOCALE) || !defined(HAVE_STRFTIME)) -# undef USE_LOCALE -#endif - -/***************************************************************** - * terminal handling - */ - -#if defined (POSIX) || defined (__FreeBSD__) -# include -# ifdef hpux -# include -# endif /* hpux */ -# ifdef NCCS -# define MAXCC NCCS -# else -# define MAXCC 256 -# endif -#else /* POSIX */ -# ifdef TERMIO -# include -# ifdef NCC -# define MAXCC NCC -# else -# define MAXCC 256 -# endif -# ifdef CYTERMIO -# include -# endif -# else /* TERMIO */ -# if defined (HAVE_SGTTY_H) -# include -# endif -# endif /* TERMIO */ -#endif /* POSIX */ - -#ifndef VDISABLE -# ifdef _POSIX_VDISABLE -# define VDISABLE _POSIX_VDISABLE -# else -# define VDISABLE 0377 -# endif /* _POSIX_VDISABLE */ -#endif /* !VDISABLE */ - - -/* on sgi, regardless of the stream head's read mode (RNORM/RMSGN/RMSGD) - * TIOCPKT mode causes data loss if our buffer is too small (IOSIZE) - * to hold the whole packet at first read(). - * (Marc Boucher) - * - * matthew green: - * TIOCPKT is broken on dgux 5.4.1 generic AViiON mc88100 - * - * Joe Traister: On AIX4, programs like irc won't work if screen - * uses TIOCPKT (select fails to return on pty read). - */ -#if defined(sgi) || defined(DGUX) || defined(_IBMR2) -# undef TIOCPKT -#endif - -/* linux ncurses is broken, we have to use our own tputs */ -#if defined(linux) && defined(TERMINFO) -# define tputs xtputs -#endif - -/* Alexandre Oliva: SVR4 style ptys don't work with osf */ -#ifdef __osf__ -# undef HAVE_SVR4_PTYS -#endif - -/***************************************************************** - * utmp handling - */ - -#ifdef GETUTENT - typedef char *slot_t; -#else - typedef int slot_t; -#endif - -#if defined(UTMPOK) || defined(BUGGYGETLOGIN) -# if defined(SVR4) && !defined(DGUX) && !defined(__hpux) && !defined(linux) -# include -# define UTMPFILE UTMPX_FILE -# define utmp utmpx -# define getutent getutxent -# define getutid getutxid -# define getutline getutxline -# define pututline pututxline -# define setutent setutxent -# define endutent endutxent -# define ut_time ut_xtime -# else /* SVR4 */ -# include -# endif /* SVR4 */ -# ifdef apollo - /* - * We don't have GETUTENT, so we dig into utmp ourselves. - * But we save the permanent filedescriptor and - * open utmp just when we need to. - * This code supports an unsorted utmp. jw. - */ -# define UTNOKEEP -# endif /* apollo */ - -# ifndef UTMPFILE -# ifdef UTMP_FILE -# define UTMPFILE UTMP_FILE -# else -# ifdef _PATH_UTMP -# define UTMPFILE _PATH_UTMP -# else -# define UTMPFILE "/etc/utmp" -# endif /* _PATH_UTMP */ -# endif -# endif - -#endif /* UTMPOK || BUGGYGETLOGIN */ - -#if !defined(UTMPOK) && defined(USRLIMIT) -# undef USRLIMIT -#endif - -#ifdef LOGOUTOK -# ifndef LOGINDEFAULT -# define LOGINDEFAULT 0 -# endif -#else -# ifdef LOGINDEFAULT -# undef LOGINDEFAULT -# endif -# define LOGINDEFAULT 1 -#endif - - -/***************************************************************** - * file stuff - */ - -#ifndef F_OK -#define F_OK 0 -#endif -#ifndef X_OK -#define X_OK 1 -#endif -#ifndef W_OK -#define W_OK 2 -#endif -#ifndef R_OK -#define R_OK 4 -#endif - -#ifndef S_IFIFO -#define S_IFIFO 0010000 -#endif -#ifndef S_IREAD -#define S_IREAD 0000400 -#endif -#ifndef S_IWRITE -#define S_IWRITE 0000200 -#endif -#ifndef S_IEXEC -#define S_IEXEC 0000100 -#endif - -#if defined(S_IFIFO) && defined(S_IFMT) && !defined(S_ISFIFO) -#define S_ISFIFO(mode) (((mode) & S_IFMT) == S_IFIFO) -#endif -#if defined(S_IFSOCK) && defined(S_IFMT) && !defined(S_ISSOCK) -#define S_ISSOCK(mode) (((mode) & S_IFMT) == S_IFSOCK) -#endif -#if defined(S_IFCHR) && defined(S_IFMT) && !defined(S_ISCHR) -#define S_ISCHR(mode) (((mode) & S_IFMT) == S_IFCHR) -#endif -#if defined(S_IFDIR) && defined(S_IFMT) && !defined(S_ISDIR) -#define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR) -#endif -#if defined(S_IFLNK) && defined(S_IFMT) && !defined(S_ISLNK) -#define S_ISLNK(mode) (((mode) & S_IFMT) == S_IFLNK) -#endif - -/* - * SunOS 4.1.3: `man 2V open' has only one line that mentions O_NOBLOCK: - * - * O_NONBLOCK Same as O_NDELAY above. - * - * on the very same SunOS 4.1.3, I traced the open system call and found - * that an open("/dev/ttyy08", O_RDWR|O_NONBLOCK|O_NOCTTY) was blocked, - * whereas open("/dev/ttyy08", O_RDWR|O_NDELAY |O_NOCTTY) went through. - * - * For this simple reason I now favour O_NDELAY. jw. 4.5.95 - */ -#if defined(sun) && !defined(SVR4) -# undef O_NONBLOCK -#endif - -#if !defined(O_NONBLOCK) && defined(O_NDELAY) -# define O_NONBLOCK O_NDELAY -#endif - -#if !defined(FNBLOCK) && defined(FNONBLOCK) -# define FNBLOCK FNONBLOCK -#endif -#if !defined(FNBLOCK) && defined(FNDELAY) -# define FNBLOCK FNDELAY -#endif -#if !defined(FNBLOCK) && defined(O_NONBLOCK) -# define FNBLOCK O_NONBLOCK -#endif - -#ifndef POSIX -#undef mkfifo -#define mkfifo(n,m) mknod(n,S_IFIFO|(m),0) -#endif - -#if !defined(HAVE_LSTAT) && !defined(lstat) -# define lstat stat -#endif - -/***************************************************************** - * signal handling - */ - -#ifdef SIGVOID -# define SIGRETURN -# define sigret_t void -#else -# define SIGRETURN return 0; -# define sigret_t int -#endif - -/* Geeeee, reverse it? */ -#if defined(SVR4) || (defined(SYSV) && defined(ISC)) || defined(_AIX) || defined(linux) || defined(ultrix) || defined(__386BSD__) || defined(__bsdi__) || defined(POSIX) || defined(NeXT) -# define SIGHASARG -#endif - -#ifdef SIGHASARG -# define SIGPROTOARG (int) -# define SIGDEFARG (sigsig) int sigsig; -# define SIGARG 0 -#else -# define SIGPROTOARG (void) -# define SIGDEFARG () -# define SIGARG -#endif - -#ifndef SIGCHLD -#define SIGCHLD SIGCLD -#endif - -#if defined(POSIX) || defined(hpux) -# define signal xsignal -#else -# ifdef USESIGSET -# define signal sigset -# endif /* USESIGSET */ -#endif - -/* used in screen.c and attacher.c */ -#ifndef NSIG /* kbeal needs these w/o SYSV */ -# define NSIG 32 -#endif /* !NSIG */ - - -/***************************************************************** - * Wait stuff - */ - -#if (!defined(sysV68) && !defined(M_XENIX)) || defined(NeXT) || defined(M_UNIX) -# include -#endif - -#ifndef WTERMSIG -# ifndef BSDWAIT /* if wait is NOT a union: */ -# define WTERMSIG(status) (status & 0177) -# else -# define WTERMSIG(status) status.w_T.w_Termsig -# endif -#endif - -#ifndef WSTOPSIG -# ifndef BSDWAIT /* if wait is NOT a union: */ -# define WSTOPSIG(status) ((status >> 8) & 0377) -# else -# define WSTOPSIG(status) status.w_S.w_Stopsig -# endif -#endif - -/* NET-2 uses WCOREDUMP */ -#if defined(WCOREDUMP) && !defined(WIFCORESIG) -# define WIFCORESIG(status) WCOREDUMP(status) -#endif - -#ifndef WIFCORESIG -# ifndef BSDWAIT /* if wait is NOT a union: */ -# define WIFCORESIG(status) (status & 0200) -# else -# define WIFCORESIG(status) status.w_T.w_Coredump -# endif -#endif - -#ifndef WEXITSTATUS -# ifndef BSDWAIT /* if wait is NOT a union: */ -# define WEXITSTATUS(status) ((status >> 8) & 0377) -# else -# define WEXITSTATUS(status) status.w_T.w_Retcode -# endif -#endif - - -/***************************************************************** - * select stuff - */ - -#if defined(M_XENIX) || defined(M_UNIX) || defined(_SEQUENT_) || defined (__INTERIX) -#include /* for timeval + FD... */ -#endif - -/* - * SunOS 3.5 - Tom Schmidt - Micron Semiconductor, Inc - 27-Jul-93 - * tschmidt@vax.micron.com - */ -#ifndef FD_SET -# ifndef SUNOS3 -typedef struct fd_set { int fds_bits[1]; } fd_set; -# endif -# define FD_ZERO(fd) ((fd)->fds_bits[0] = 0) -# define FD_SET(b, fd) ((fd)->fds_bits[0] |= 1 << (b)) -# define FD_ISSET(b, fd) ((fd)->fds_bits[0] & 1 << (b)) -# define FD_SETSIZE 32 -#endif - - -/***************************************************************** - * user defineable stuff - */ - -#ifndef TERMCAP_BUFSIZE -# define TERMCAP_BUFSIZE 2048 -#endif - -#ifndef MAXPATHLEN -# define MAXPATHLEN 1024 -#endif - -/* - * you may try to vary this value. Use low values if your (VMS) system - * tends to choke when pasting. Use high values if you want to test - * how many characters your pty's can buffer. - */ -#define IOSIZE 4096 diff --git a/readline/examples/rlfe/pty.c b/readline/examples/rlfe/pty.c deleted file mode 100644 index 556272040c..0000000000 --- a/readline/examples/rlfe/pty.c +++ /dev/null @@ -1,388 +0,0 @@ -/* Copyright (c) 1993-2002 - * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) - * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) - * Copyright (c) 1987 Oliver Laumann - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program (see the file COPYING); if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - * - **************************************************************** - */ -#include "config.h" - -#include -#include -#include -#include - -#include - -#include "screen.h" - -#ifndef sun -# include -#endif - -/* for solaris 2.1, Unixware (SVR4.2) and possibly others */ -#if defined (HAVE_SVR4_PTYS) && defined (HAVE_SYS_STROPTS_H) -# include -#endif - -#if defined(sun) && defined(LOCKPTY) && !defined(TIOCEXCL) -# include -#endif - -#ifdef ISC -# include -# include -# include -#endif - -#ifdef sgi -# include -#endif /* sgi */ - -#include "extern.h" - -/* - * if no PTYRANGE[01] is in the config file, we pick a default - */ -#ifndef PTYRANGE0 -# define PTYRANGE0 "qpr" -#endif -#ifndef PTYRANGE1 -# define PTYRANGE1 "0123456789abcdef" -#endif - -/* SVR4 pseudo ttys don't seem to work with SCO-5 */ -#ifdef M_UNIX -# undef HAVE_SVR4_PTYS -#endif - -extern int eff_uid; - -/* used for opening a new pty-pair: */ -static char PtyName[32], TtyName[32]; - -#if !(defined(sequent) || defined(_SEQUENT_) || defined(HAVE_SVR4_PTYS)) -# ifdef hpux -static char PtyProto[] = "/dev/ptym/ptyXY"; -static char TtyProto[] = "/dev/pty/ttyXY"; -# else -# ifdef M_UNIX -static char PtyProto[] = "/dev/ptypXY"; -static char TtyProto[] = "/dev/ttypXY"; -# else -static char PtyProto[] = "/dev/ptyXY"; -static char TtyProto[] = "/dev/ttyXY"; -# endif -# endif /* hpux */ -#endif - -static void initmaster __P((int)); - -#if defined(sun) -/* sun's utmp_update program opens the salve side, thus corrupting - */ -int pty_preopen = 1; -#else -int pty_preopen = 0; -#endif - -/* - * Open all ptys with O_NOCTTY, just to be on the safe side - * (RISCos mips breaks otherwise) - */ -#ifndef O_NOCTTY -# define O_NOCTTY 0 -#endif - -/***************************************************************/ - -static void -initmaster(f) -int f; -{ -#ifdef POSIX - tcflush(f, TCIOFLUSH); -#else -# ifdef TIOCFLUSH - (void) ioctl(f, TIOCFLUSH, (char *) 0); -# endif -#endif -#ifdef LOCKPTY - (void) ioctl(f, TIOCEXCL, (char *) 0); -#endif -} - -void -InitPTY(f) -int f; -{ - if (f < 0) - return; -#if defined(I_PUSH) && defined(HAVE_SVR4_PTYS) && !defined(sgi) && !defined(linux) && !defined(__osf__) && !defined(M_UNIX) - if (ioctl(f, I_PUSH, "ptem")) - Panic(errno, "InitPTY: cannot I_PUSH ptem"); - if (ioctl(f, I_PUSH, "ldterm")) - Panic(errno, "InitPTY: cannot I_PUSH ldterm"); -# ifdef sun - if (ioctl(f, I_PUSH, "ttcompat")) - Panic(errno, "InitPTY: cannot I_PUSH ttcompat"); -# endif -#endif -} - -/***************************************************************/ - -#if defined(OSX) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - register int f; - if ((f = open_controlling_pty(TtyName)) < 0) - return -1; - initmaster(f); - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#if (defined(sequent) || defined(_SEQUENT_)) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - char *m, *s; - register int f; - - if ((f = getpseudotty(&s, &m)) < 0) - return -1; -#ifdef _SEQUENT_ - fvhangup(s); -#endif - strncpy(PtyName, m, sizeof(PtyName)); - strncpy(TtyName, s, sizeof(TtyName)); - initmaster(f); - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#if defined(__sgi) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - int f; - char *name, *_getpty(); - sigret_t (*sigcld)__P(SIGPROTOARG); - - /* - * SIGCHLD set to SIG_DFL for _getpty() because it may fork() and - * exec() /usr/adm/mkpts - */ - sigcld = signal(SIGCHLD, SIG_DFL); - name = _getpty(&f, O_RDWR | O_NONBLOCK, 0600, 0); - signal(SIGCHLD, sigcld); - - if (name == 0) - return -1; - initmaster(f); - *ttyn = name; - return f; -} -#endif - -/***************************************************************/ - -#if defined(MIPS) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - register int f; - struct stat buf; - - strcpy(PtyName, "/dev/ptc"); - if ((f = open(PtyName, O_RDWR | O_NOCTTY | O_NONBLOCK)) < 0) - return -1; - if (fstat(f, &buf) < 0) - { - close(f); - return -1; - } - sprintf(TtyName, "/dev/ttyq%d", minor(buf.st_rdev)); - initmaster(f); - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#if defined(HAVE_SVR4_PTYS) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - register int f; - char *m, *ptsname(); - int unlockpt __P((int)), grantpt __P((int)); -#if defined(HAVE_GETPT) && defined(linux) - int getpt __P((void)); -#endif - sigret_t (*sigcld)__P(SIGPROTOARG); - - strcpy(PtyName, "/dev/ptmx"); -#if defined(HAVE_GETPT) && defined(linux) - if ((f = getpt()) == -1) -#else - if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1) -#endif - return -1; - - /* - * SIGCHLD set to SIG_DFL for grantpt() because it fork()s and - * exec()s pt_chmod - */ - sigcld = signal(SIGCHLD, SIG_DFL); - if ((m = ptsname(f)) == NULL || grantpt(f) || unlockpt(f)) - { - signal(SIGCHLD, sigcld); - close(f); - return -1; - } - signal(SIGCHLD, sigcld); - strncpy(TtyName, m, sizeof(TtyName)); - initmaster(f); - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#if defined(_AIX) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE) -#define PTY_DONE - -int -OpenPTY(ttyn) -char **ttyn; -{ - register int f; - - /* a dumb looking loop replaced by mycrofts code: */ - strcpy (PtyName, "/dev/ptc"); - if ((f = open (PtyName, O_RDWR | O_NOCTTY)) < 0) - return -1; - strncpy(TtyName, ttyname(f), sizeof(TtyName)); - if (eff_uid && access(TtyName, R_OK | W_OK)) - { - close(f); - return -1; - } - initmaster(f); -# ifdef _IBMR2 - pty_preopen = 1; -# endif - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#if defined(HAVE_OPENPTY) && !defined(PTY_DONE) -#define PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - int f, s; - if (openpty(&f, &s, TtyName, NULL, NULL) != 0) - return -1; - close(s); - initmaster(f); - pty_preopen = 1; - *ttyn = TtyName; - return f; -} -#endif - -/***************************************************************/ - -#ifndef PTY_DONE -int -OpenPTY(ttyn) -char **ttyn; -{ - register char *p, *q, *l, *d; - register int f; - - debug("OpenPTY: Using BSD style ptys.\n"); - strcpy(PtyName, PtyProto); - strcpy(TtyName, TtyProto); - for (p = PtyName; *p != 'X'; p++) - ; - for (q = TtyName; *q != 'X'; q++) - ; - for (l = PTYRANGE0; (*p = *l) != '\0'; l++) - { - for (d = PTYRANGE1; (p[1] = *d) != '\0'; d++) - { - debug1("OpenPTY tries '%s'\n", PtyName); - if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1) - continue; - q[0] = *l; - q[1] = *d; - if (eff_uid && access(TtyName, R_OK | W_OK)) - { - close(f); - continue; - } -#if defined(sun) && defined(TIOCGPGRP) && !defined(SUNOS3) - /* Hack to ensure that the slave side of the pty is - * unused. May not work in anything other than SunOS4.1 - */ - { - int pgrp; - - /* tcgetpgrp does not work (uses TIOCGETPGRP)! */ - if (ioctl(f, TIOCGPGRP, (char *)&pgrp) != -1 || errno != EIO) - { - close(f); - continue; - } - } -#endif - initmaster(f); - *ttyn = TtyName; - return f; - } - } - return -1; -} -#endif diff --git a/readline/examples/rlfe/rlfe.c b/readline/examples/rlfe/rlfe.c deleted file mode 100644 index f40b2ddaf0..0000000000 --- a/readline/examples/rlfe/rlfe.c +++ /dev/null @@ -1,792 +0,0 @@ -/* A front-end using readline to "cook" input lines. - * - * Copyright (C) 2004, 1999 Per Bothner - * - * This front-end program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as published - * by the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * Some code from Johnson & Troan: "Linux Application Development" - * (Addison-Wesley, 1998) was used directly or for inspiration. - * - * 2003-11-07 Wolfgang Taeuber - * Specify a history file and the size of the history file with command - * line options; use EDITOR/VISUAL to set vi/emacs preference. - */ - -/* PROBLEMS/TODO: - * - * Only tested under GNU/Linux and Mac OS 10.x; needs to be ported. - * - * Switching between line-editing-mode vs raw-char-mode depending on - * what tcgetattr returns is inherently not robust, plus it doesn't - * work when ssh/telnetting in. A better solution is possible if the - * tty system can send in-line escape sequences indicating the current - * mode, echo'd input, etc. That would also allow a user preference - * to set different colors for prompt, input, stdout, and stderr. - * - * When running mc -c under the Linux console, mc does not recognize - * mouse clicks, which mc does when not running under rlfe. - * - * Pasting selected text containing tabs is like hitting the tab character, - * which invokes readline completion. We don't want this. I don't know - * if this is fixable without integrating rlfe into a terminal emulator. - * - * Echo suppression is a kludge, but can only be avoided with better kernel - * support: We need a tty mode to disable "real" echoing, while still - * letting the inferior think its tty driver to doing echoing. - * Stevens's book claims SCR$ and BSD4.3+ have TIOCREMOTE. - * - * The latest readline may have some hooks we can use to avoid having - * to back up the prompt. (See HAVE_ALREADY_PROMPTED.) - * - * Desirable readline feature: When in cooked no-echo mode (e.g. password), - * echo characters are they are types with '*', but remove them when done. - * - * Asynchronous output while we're editing an input line should be - * inserted in the output view *before* the input line, so that the - * lines being edited (with the prompt) float at the end of the input. - * - * A "page mode" option to emulate more/less behavior: At each page of - * output, pause for a user command. This required parsing the output - * to keep track of line lengths. It also requires remembering the - * output, if we want an option to scroll back, which suggests that - * this should be integrated with a terminal emulator like xterm. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "config.h" -#include "extern.h" - -#if defined (HAVE_SYS_WAIT_H) -# include -#endif - -#ifdef READLINE_LIBRARY -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -#ifndef COMMAND -#define COMMAND "/bin/bash" -#endif -#ifndef COMMAND_ARGS -#define COMMAND_ARGS COMMAND -#endif - -#ifndef ALT_COMMAND -#define ALT_COMMAND "/bin/sh" -#endif -#ifndef ALT_COMMAND_ARGS -#define ALT_COMMAND_ARGS ALT_COMMAND -#endif - -#ifndef HAVE_MEMMOVE -# if __GNUC__ > 1 -# define memmove(d, s, n) __builtin_memcpy(d, s, n) -# else -# define memmove(d, s, n) memcpy(d, s, n) -# endif -#else -# define memmove(d, s, n) memcpy(d, s, n) -#endif - -#define APPLICATION_NAME "rlfe" - -static int in_from_inferior_fd; -static int out_to_inferior_fd; -static void set_edit_mode (); -static void usage_exit (); -static char *hist_file = 0; -static int hist_size = 0; - -/* Unfortunately, we cannot safely display echo from the inferior process. - The reason is that the echo bit in the pty is "owned" by the inferior, - and if we try to turn it off, we could confuse the inferior. - Thus, when echoing, we get echo twice: First readline echoes while - we're actually editing. Then we send the line to the inferior, and the - terminal driver send back an extra echo. - The work-around is to remember the input lines, and when we see that - line come back, we supress the output. - A better solution (supposedly available on SVR4) would be a smarter - terminal driver, with more flags ... */ -#define ECHO_SUPPRESS_MAX 1024 -char echo_suppress_buffer[ECHO_SUPPRESS_MAX]; -int echo_suppress_start = 0; -int echo_suppress_limit = 0; - -/*#define DEBUG*/ - -#ifdef DEBUG -FILE *logfile = NULL; -#define DPRINT0(FMT) (fprintf(logfile, FMT), fflush(logfile)) -#define DPRINT1(FMT, V1) (fprintf(logfile, FMT, V1), fflush(logfile)) -#define DPRINT2(FMT, V1, V2) (fprintf(logfile, FMT, V1, V2), fflush(logfile)) -#else -#define DPRINT0(FMT) ((void) 0) /* Do nothing */ -#define DPRINT1(FMT, V1) ((void) 0) /* Do nothing */ -#define DPRINT2(FMT, V1, V2) ((void) 0) /* Do nothing */ -#endif - -struct termios orig_term; - -/* Pid of child process. */ -static pid_t child = -1; - -static void -sig_child (int signo) -{ - int status; - wait (&status); - if (hist_file != 0) - { - write_history (hist_file); - if (hist_size) - history_truncate_file (hist_file, hist_size); - } - DPRINT0 ("(Child process died.)\n"); - tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); - exit (0); -} - -volatile int propagate_sigwinch = 0; - -/* sigwinch_handler - * propagate window size changes from input file descriptor to - * master side of pty. - */ -void sigwinch_handler(int signal) { - propagate_sigwinch = 1; -} - - -/* get_slave_pty() returns an integer file descriptor. - * If it returns < 0, an error has occurred. - * Otherwise, it has returned the slave file descriptor. - */ - -int get_slave_pty(char *name) { - struct group *gptr; - gid_t gid; - int slave = -1; - - /* chown/chmod the corresponding pty, if possible. - * This will only work if the process has root permissions. - * Alternatively, write and exec a small setuid program that - * does just this. - */ - if ((gptr = getgrnam("tty")) != 0) { - gid = gptr->gr_gid; - } else { - /* if the tty group does not exist, don't change the - * group on the slave pty, only the owner - */ - gid = -1; - } - - /* Note that we do not check for errors here. If this is code - * where these actions are critical, check for errors! - */ - chown(name, getuid(), gid); - /* This code only makes the slave read/writeable for the user. - * If this is for an interactive shell that will want to - * receive "write" and "wall" messages, OR S_IWGRP into the - * second argument below. - */ - chmod(name, S_IRUSR|S_IWUSR); - - /* open the corresponding slave pty */ - slave = open(name, O_RDWR); - return (slave); -} - -/* Certain special characters, such as ctrl/C, we want to pass directly - to the inferior, rather than letting readline handle them. */ - -static char special_chars[20]; -static int special_chars_count; - -static void -add_special_char(int ch) -{ - if (ch != 0) - special_chars[special_chars_count++] = ch; -} - -static int eof_char; - -static int -is_special_char(int ch) -{ - int i; -#if 0 - if (ch == eof_char && rl_point == rl_end) - return 1; -#endif - for (i = special_chars_count; --i >= 0; ) - if (special_chars[i] == ch) - return 1; - return 0; -} - -static char buf[1024]; -/* buf[0 .. buf_count-1] is the what has been emitted on the current line. - It is used as the readline prompt. */ -static int buf_count = 0; - -int do_emphasize_input = 1; -int current_emphasize_input; - -char *start_input_mode = "\033[1m"; -char *end_input_mode = "\033[0m"; - -int num_keys = 0; - -static void maybe_emphasize_input (int on) -{ - if (on == current_emphasize_input - || (on && ! do_emphasize_input)) - return; - fprintf (rl_outstream, on ? start_input_mode : end_input_mode); - fflush (rl_outstream); - current_emphasize_input = on; -} - -static void -null_prep_terminal (int meta) -{ -} - -static void -null_deprep_terminal () -{ - maybe_emphasize_input (0); -} - -static int -pre_input_change_mode (void) -{ - return 0; -} - -char pending_special_char; - -static void -line_handler (char *line) -{ - if (line == NULL) - { - char buf[1]; - DPRINT0("saw eof!\n"); - buf[0] = '\004'; /* ctrl/d */ - write (out_to_inferior_fd, buf, 1); - } - else - { - static char enter[] = "\r"; - /* Send line to inferior: */ - int length = strlen (line); - if (length > ECHO_SUPPRESS_MAX-2) - { - echo_suppress_start = 0; - echo_suppress_limit = 0; - } - else - { - if (echo_suppress_limit + length > ECHO_SUPPRESS_MAX - 2) - { - if (echo_suppress_limit - echo_suppress_start + length - <= ECHO_SUPPRESS_MAX - 2) - { - memmove (echo_suppress_buffer, - echo_suppress_buffer + echo_suppress_start, - echo_suppress_limit - echo_suppress_start); - echo_suppress_limit -= echo_suppress_start; - echo_suppress_start = 0; - } - else - { - echo_suppress_limit = 0; - } - echo_suppress_start = 0; - } - memcpy (echo_suppress_buffer + echo_suppress_limit, - line, length); - echo_suppress_limit += length; - echo_suppress_buffer[echo_suppress_limit++] = '\r'; - echo_suppress_buffer[echo_suppress_limit++] = '\n'; - } - write (out_to_inferior_fd, line, length); - if (pending_special_char == 0) - { - write (out_to_inferior_fd, enter, sizeof(enter)-1); - if (*line) - add_history (line); - } - free (line); - } - rl_callback_handler_remove (); - buf_count = 0; - num_keys = 0; - if (pending_special_char != 0) - { - write (out_to_inferior_fd, &pending_special_char, 1); - pending_special_char = 0; - } -} - -/* Value of rl_getc_function. - Use this because readline should read from stdin, not rl_instream, - points to the pty (so readline has monitor its terminal modes). */ - -int -my_rl_getc (FILE *dummy) -{ - int ch = rl_getc (stdin); - if (is_special_char (ch)) - { - pending_special_char = ch; - return '\r'; - } - return ch; -} - -int -main(int argc, char** argv) -{ - char *path; - int i; - int master; - char *name; - int in_from_tty_fd; - struct sigaction act; - struct winsize ws; - struct termios t; - int maxfd; - fd_set in_set; - static char empty_string[1] = ""; - char *prompt = empty_string; - int ioctl_err = 0; - int arg_base = 1; - -#ifdef DEBUG - logfile = fopen("/tmp/rlfe.log", "w"); -#endif - - while (arg_base= argc ) - usage_exit(); - switch(argv[arg_base][1]) - { - case 'h': - arg_base++; - hist_file = argv[arg_base]; - break; - case 's': - arg_base++; - hist_size = atoi(argv[arg_base]); - if (hist_size<0) - usage_exit(); - break; - default: - usage_exit(); - } - arg_base++; - } - if (hist_file) - read_history (hist_file); - - set_edit_mode (); - - rl_readline_name = APPLICATION_NAME; - - if ((master = OpenPTY (&name)) < 0) - { - perror("ptypair: could not open master pty"); - exit(1); - } - - DPRINT1("pty name: '%s'\n", name); - - /* set up SIGWINCH handler */ - act.sa_handler = sigwinch_handler; - sigemptyset(&(act.sa_mask)); - act.sa_flags = 0; - if (sigaction(SIGWINCH, &act, NULL) < 0) - { - perror("ptypair: could not handle SIGWINCH "); - exit(1); - } - - if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) < 0) - { - perror("ptypair: could not get window size"); - exit(1); - } - - if ((child = fork()) < 0) - { - perror("cannot fork"); - exit(1); - } - - if (child == 0) - { - int slave; /* file descriptor for slave pty */ - - /* We are in the child process */ - close(master); - -#ifdef TIOCSCTTY - if ((slave = get_slave_pty(name)) < 0) - { - perror("ptypair: could not open slave pty"); - exit(1); - } -#endif - - /* We need to make this process a session group leader, because - * it is on a new PTY, and things like job control simply will - * not work correctly unless there is a session group leader - * and process group leader (which a session group leader - * automatically is). This also disassociates us from our old - * controlling tty. - */ - if (setsid() < 0) - { - perror("could not set session leader"); - } - - /* Tie us to our new controlling tty. */ -#ifdef TIOCSCTTY - if (ioctl(slave, TIOCSCTTY, NULL)) - { - perror("could not set new controlling tty"); - } -#else - if ((slave = get_slave_pty(name)) < 0) - { - perror("ptypair: could not open slave pty"); - exit(1); - } -#endif - - /* make slave pty be standard in, out, and error */ - dup2(slave, STDIN_FILENO); - dup2(slave, STDOUT_FILENO); - dup2(slave, STDERR_FILENO); - - /* at this point the slave pty should be standard input */ - if (slave > 2) - { - close(slave); - } - - /* Try to restore window size; failure isn't critical */ - if (ioctl(STDOUT_FILENO, TIOCSWINSZ, &ws) < 0) - { - perror("could not restore window size"); - } - - /* now start the shell */ - { - static char* command_args[] = { COMMAND_ARGS, NULL }; - static char* alt_command_args[] = { ALT_COMMAND_ARGS, NULL }; - if (argc <= 1) - { - execvp (COMMAND, command_args); - execvp (ALT_COMMAND, alt_command_args); - } - else - execvp (argv[arg_base], &argv[arg_base]); - } - - /* should never be reached */ - exit(1); - } - - /* parent */ - signal (SIGCHLD, sig_child); - - /* Note that we only set termios settings for standard input; - * the master side of a pty is NOT a tty. - */ - tcgetattr(STDIN_FILENO, &orig_term); - - t = orig_term; - eof_char = t.c_cc[VEOF]; - /* add_special_char(t.c_cc[VEOF]);*/ - add_special_char(t.c_cc[VINTR]); - add_special_char(t.c_cc[VQUIT]); - add_special_char(t.c_cc[VSUSP]); -#if defined (VDISCARD) - add_special_char(t.c_cc[VDISCARD]); -#endif - - t.c_lflag &= ~(ICANON | ISIG | ECHO | ECHOCTL | ECHOE | \ - ECHOK | ECHONL -#if defined (ECHOKE) - | ECHOKE -#endif -#if defined (ECHOPRT) - | ECHOPRT -#endif - ); - t.c_iflag &= ~ICRNL; - t.c_iflag |= IGNBRK; - t.c_cc[VMIN] = 1; - t.c_cc[VTIME] = 0; - tcsetattr(STDIN_FILENO, TCSANOW, &t); - in_from_inferior_fd = master; - out_to_inferior_fd = master; - rl_instream = fdopen (master, "r"); - rl_getc_function = my_rl_getc; - - rl_prep_term_function = null_prep_terminal; - rl_deprep_term_function = null_deprep_terminal; - rl_pre_input_hook = pre_input_change_mode; - rl_callback_handler_install (prompt, line_handler); - - in_from_tty_fd = STDIN_FILENO; - FD_ZERO (&in_set); - maxfd = in_from_inferior_fd > in_from_tty_fd ? in_from_inferior_fd - : in_from_tty_fd; - for (;;) - { - int num; - FD_SET (in_from_inferior_fd, &in_set); - FD_SET (in_from_tty_fd, &in_set); - - num = select(maxfd+1, &in_set, NULL, NULL, NULL); - - if (propagate_sigwinch) - { - struct winsize ws; - if (ioctl (STDIN_FILENO, TIOCGWINSZ, &ws) >= 0) - { - ioctl (master, TIOCSWINSZ, &ws); - } - propagate_sigwinch = 0; - continue; - } - - if (num <= 0) - { - perror ("select"); - exit (-1); - } - if (FD_ISSET (in_from_tty_fd, &in_set)) - { - extern int _rl_echoing_p; - struct termios term_master; - int do_canon = 1; - int do_icrnl = 1; - int ioctl_ret; - - DPRINT1("[tty avail num_keys:%d]\n", num_keys); - - /* If we can't get tty modes for the master side of the pty, we - can't handle non-canonical-mode programs. Always assume the - master is in canonical echo mode if we can't tell. */ - ioctl_ret = tcgetattr(master, &term_master); - - if (ioctl_ret >= 0) - { - do_canon = (term_master.c_lflag & ICANON) != 0; - do_icrnl = (term_master.c_lflag & ICRNL) != 0; - _rl_echoing_p = (term_master.c_lflag & ECHO) != 0; - DPRINT1 ("echo,canon,crnl:%03d\n", - 100 * _rl_echoing_p - + 10 * do_canon - + 1 * do_icrnl); - } - else - { - if (ioctl_err == 0) - DPRINT1("tcgetattr on master fd failed: errno = %d\n", errno); - ioctl_err = 1; - } - - if (do_canon == 0 && num_keys == 0) - { - char ch[10]; - int count = read (STDIN_FILENO, ch, sizeof(ch)); - DPRINT1("[read %d chars from stdin: ", count); - DPRINT2(" \"%.*s\"]\n", count, ch); - if (do_icrnl) - { - int i = count; - while (--i >= 0) - { - if (ch[i] == '\r') - ch[i] = '\n'; - } - } - maybe_emphasize_input (1); - write (out_to_inferior_fd, ch, count); - } - else - { - if (num_keys == 0) - { - int i; - /* Re-install callback handler for new prompt. */ - if (prompt != empty_string) - free (prompt); - if (prompt == NULL) - { - DPRINT0("New empty prompt\n"); - prompt = empty_string; - } - else - { - if (do_emphasize_input && buf_count > 0) - { - prompt = malloc (buf_count + strlen (end_input_mode) - + strlen (start_input_mode) + 5); - sprintf (prompt, "\001%s\002%.*s\001%s\002", - end_input_mode, - buf_count, buf, - start_input_mode); - } - else - { - prompt = malloc (buf_count + 1); - memcpy (prompt, buf, buf_count); - prompt[buf_count] = '\0'; - } - DPRINT1("New prompt '%s'\n", prompt); -#if 0 /* ifdef HAVE_RL_ALREADY_PROMPTED */ - /* Doesn't quite work when do_emphasize_input is 1. */ - rl_already_prompted = buf_count > 0; -#else - if (buf_count > 0) - write (1, "\r", 1); -#endif - } - - rl_callback_handler_install (prompt, line_handler); - } - num_keys++; - maybe_emphasize_input (1); - rl_callback_read_char (); - } - } - else /* output from inferior. */ - { - int i; - int count; - int old_count; - if (buf_count > (sizeof(buf) >> 2)) - buf_count = 0; - count = read (in_from_inferior_fd, buf+buf_count, - sizeof(buf) - buf_count); - DPRINT2("read %d from inferior, buf_count=%d", count, buf_count); - DPRINT2(": \"%.*s\"", count, buf+buf_count); - maybe_emphasize_input (0); - if (count <= 0) - { - DPRINT0 ("(Connection closed by foreign host.)\n"); - tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); - exit (0); - } - old_count = buf_count; - - /* Look for any pending echo that we need to suppress. */ - while (echo_suppress_start < echo_suppress_limit - && count > 0 - && buf[buf_count] == echo_suppress_buffer[echo_suppress_start]) - { - count--; - buf_count++; - echo_suppress_start++; - } - DPRINT1("suppressed %d characters of echo.\n", buf_count-old_count); - - /* Write to the terminal anything that was not suppressed. */ - if (count > 0) - write (1, buf + buf_count, count); - - /* Finally, look for a prompt candidate. - * When we get around to going input (from the keyboard), - * we will consider the prompt to be anything since the last - * line terminator. So we need to save that text in the - * initial part of buf. However, anything before the - * most recent end-of-line is not interesting. */ - buf_count += count; -#if 1 - for (i = buf_count; --i >= old_count; ) -#else - for (i = buf_count - 1; i-- >= buf_count - count; ) -#endif - { - if (buf[i] == '\n' || buf[i] == '\r') - { - i++; - memmove (buf, buf+i, buf_count - i); - buf_count -= i; - break; - } - } - DPRINT2("-> i: %d, buf_count: %d\n", i, buf_count); - } - } -} - -static void set_edit_mode () -{ - int vi = 0; - char *shellopts; - - shellopts = getenv ("SHELLOPTS"); - while (shellopts != 0) - { - if (strncmp ("vi", shellopts, 2) == 0) - { - vi = 1; - break; - } - shellopts = strchr (shellopts + 1, ':'); - } - - if (!vi) - { - if (getenv ("EDITOR") != 0) - vi |= strcmp (getenv ("EDITOR"), "vi") == 0; - } - - if (vi) - rl_variable_bind ("editing-mode", "vi"); - else - rl_variable_bind ("editing-mode", "emacs"); -} - - -static void usage_exit () -{ - fprintf (stderr, "Usage: rlfe [-h histfile] [-s size] cmd [arg1] [arg2] ...\n\n"); - exit (1); -} diff --git a/readline/examples/rlfe/screen.h b/readline/examples/rlfe/screen.h deleted file mode 100644 index 5b040c3dac..0000000000 --- a/readline/examples/rlfe/screen.h +++ /dev/null @@ -1,2 +0,0 @@ -/* Dummy header to avoid modifying pty.c */ -#include "os.h" diff --git a/readline/examples/rlkeymaps.c b/readline/examples/rlkeymaps.c deleted file mode 100644 index fef77b35ab..0000000000 --- a/readline/examples/rlkeymaps.c +++ /dev/null @@ -1,61 +0,0 @@ -#include -#include -#include -#include - -#if defined (READLINE_LIBRARY) -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -int -main (int c, char **v) -{ - Keymap nmap, emacsmap, newemacs; - int r, errs; - - errs = 0; - nmap = rl_make_keymap (); - - r = rl_set_keymap_name ("emacs", nmap); - if (r >= 0) - { - fprintf (stderr, "rlkeymaps: error: able to rename `emacs' keymap\n"); - errs++; - } - - emacsmap = rl_get_keymap_by_name ("emacs"); - r = rl_set_keymap_name ("newemacs", emacsmap); - if (r >= 0) - { - fprintf (stderr, "rlkeymaps: error: able to set new name for emacs keymap\n"); - errs++; - } - - r = rl_set_keymap_name ("newemacs", nmap); - if (r < 0) - { - fprintf (stderr, "rlkeymaps: error: newemacs: could not set keymap name\n"); - errs++; - } - - newemacs = rl_copy_keymap (emacsmap); - r = rl_set_keymap_name ("newemacs", newemacs); - if (r < 0) - { - fprintf (stderr, "rlkeymaps: error: newemacs: could not set `newemacs' keymap to new map\n"); - errs++; - } - - r = rl_set_keymap_name ("emacscopy", newemacs); - if (r < 0) - { - fprintf (stderr, "rlkeymaps: error: emacscopy: could not rename created keymap\n"); - errs++; - } - - exit (errs); -} diff --git a/readline/examples/rlptytest.c b/readline/examples/rlptytest.c deleted file mode 100644 index 9c42f8a279..0000000000 --- a/readline/examples/rlptytest.c +++ /dev/null @@ -1,345 +0,0 @@ -/* - * - * Another test harness for the readline callback interface. - * - * Author: Bob Rossi - */ - -#if defined (HAVE_CONFIG_H) -#include -#endif - -#include -#include -#include -#include - -#include -#include - -#include - -#if 1 /* LINUX */ -#include -#else -#include -#endif - -#ifdef READLINE_LIBRARY -# include "readline.h" -#else -# include -#endif - -/** - * Master/Slave PTY used to keep readline off of stdin/stdout. - */ -static int masterfd = -1; -static int slavefd; - -void -sigint (s) - int s; -{ - tty_reset (STDIN_FILENO); - close (masterfd); - close (slavefd); - printf ("\n"); - exit (0); -} - -void -sigwinch (s) - int s; -{ - rl_resize_terminal (); -} - -static int -user_input() -{ - int size; - const int MAX = 1024; - char *buf = (char *)malloc(MAX+1); - - size = read (STDIN_FILENO, buf, MAX); - if (size == -1) - return -1; - - size = write (masterfd, buf, size); - if (size == -1) - return -1; - - return 0; -} - -static int -readline_input() -{ - const int MAX = 1024; - char *buf = (char *)malloc(MAX+1); - int size; - - size = read (masterfd, buf, MAX); - if (size == -1) - { - free( buf ); - buf = NULL; - return -1; - } - - buf[size] = 0; - - /* Display output from readline */ - if ( size > 0 ) - fprintf(stderr, "%s", buf); - - free( buf ); - buf = NULL; - return 0; -} - -static void -rlctx_send_user_command(char *line) -{ - /* This happens when rl_callback_read_char gets EOF */ - if ( line == NULL ) - return; - - if (strcmp (line, "exit") == 0) { - tty_reset (STDIN_FILENO); - close (masterfd); - close (slavefd); - printf ("\n"); - exit (0); - } - - /* Don't add the enter command */ - if ( line && *line != '\0' ) - add_history(line); -} - -static void -custom_deprep_term_function () -{ -} - -static int -init_readline (int inputfd, int outputfd) -{ - FILE *inputFILE, *outputFILE; - - inputFILE = fdopen (inputfd, "r"); - if (!inputFILE) - return -1; - - outputFILE = fdopen (outputfd, "w"); - if (!outputFILE) - return -1; - - rl_instream = inputFILE; - rl_outstream = outputFILE; - - /* Tell readline what the prompt is if it needs to put it back */ - rl_callback_handler_install("(rltest): ", rlctx_send_user_command); - - /* Set the terminal type to dumb so the output of readline can be - * understood by tgdb */ - if ( rl_reset_terminal("dumb") == -1 ) - return -1; - - /* For some reason, readline can not deprep the terminal. - * However, it doesn't matter because no other application is working on - * the terminal besides readline */ - rl_deprep_term_function = custom_deprep_term_function; - - using_history(); - read_history(".history"); - - return 0; -} - -static int -main_loop(void) -{ - fd_set rset; - int max; - - max = (masterfd > STDIN_FILENO) ? masterfd : STDIN_FILENO; - max = (max > slavefd) ? max : slavefd; - - for (;;) - { - /* Reset the fd_set, and watch for input from GDB or stdin */ - FD_ZERO(&rset); - - FD_SET(STDIN_FILENO, &rset); - FD_SET(slavefd, &rset); - FD_SET(masterfd, &rset); - - /* Wait for input */ - if (select(max + 1, &rset, NULL, NULL, NULL) == -1) - { - if (errno == EINTR) - continue; - else - return -1; - } - - /* Input received through the pty: Handle it - * Wrote to masterfd, slave fd has that input, alert readline to read it. - */ - if (FD_ISSET(slavefd, &rset)) - rl_callback_read_char(); - - /* Input received through the pty. - * Readline read from slavefd, and it wrote to the masterfd. - */ - if (FD_ISSET(masterfd, &rset)) - if ( readline_input() == -1 ) - return -1; - - /* Input received: Handle it, write to masterfd (input to readline) */ - if (FD_ISSET(STDIN_FILENO, &rset)) - if ( user_input() == -1 ) - return -1; - } - - return 0; -} - -/* The terminal attributes before calling tty_cbreak */ -static struct termios save_termios; -static struct winsize size; -static enum { RESET, TCBREAK } ttystate = RESET; - -/* tty_cbreak: Sets terminal to cbreak mode. Also known as noncanonical mode. - * 1. Signal handling is still turned on, so the user can still type those. - * 2. echo is off - * 3. Read in one char at a time. - * - * fd - The file descriptor of the terminal - * - * Returns: 0 on sucess, -1 on error - */ -int tty_cbreak(int fd){ - struct termios buf; - int ttysavefd = -1; - - if(tcgetattr(fd, &save_termios) < 0) - return -1; - - buf = save_termios; - buf.c_lflag &= ~(ECHO | ICANON); - buf.c_iflag &= ~(ICRNL | INLCR); - buf.c_cc[VMIN] = 1; - buf.c_cc[VTIME] = 0; - -#if defined (VLNEXT) && defined (_POSIX_VDISABLE) - buf.c_cc[VLNEXT] = _POSIX_VDISABLE; -#endif - -#if defined (VDSUSP) && defined (_POSIX_VDISABLE) - buf.c_cc[VDSUSP] = _POSIX_VDISABLE; -#endif - - /* enable flow control; only stty start char can restart output */ -#if 0 - buf.c_iflag |= (IXON|IXOFF); -#ifdef IXANY - buf.c_iflag &= ~IXANY; -#endif -#endif - - /* disable flow control; let ^S and ^Q through to pty */ - buf.c_iflag &= ~(IXON|IXOFF); -#ifdef IXANY - buf.c_iflag &= ~IXANY; -#endif - - if(tcsetattr(fd, TCSAFLUSH, &buf) < 0) - return -1; - - ttystate = TCBREAK; - ttysavefd = fd; - - /* set size */ - if(ioctl(fd, TIOCGWINSZ, (char *)&size) < 0) - return -1; - -#ifdef DEBUG - err_msg("%d rows and %d cols\n", size.ws_row, size.ws_col); -#endif - - return (0); -} - -int -tty_off_xon_xoff (int fd) -{ - struct termios buf; - int ttysavefd = -1; - - if(tcgetattr(fd, &buf) < 0) - return -1; - - buf.c_iflag &= ~(IXON|IXOFF); - - if(tcsetattr(fd, TCSAFLUSH, &buf) < 0) - return -1; - - return 0; -} - -/* tty_reset: Sets the terminal attributes back to their previous state. - * PRE: tty_cbreak must have already been called. - * - * fd - The file descrioptor of the terminal to reset. - * - * Returns: 0 on success, -1 on error - */ -int tty_reset(int fd) -{ - if(ttystate != TCBREAK) - return (0); - - if(tcsetattr(fd, TCSAFLUSH, &save_termios) < 0) - return (-1); - - ttystate = RESET; - - return 0; -} - -int -main() -{ - int val; - val = openpty (&masterfd, &slavefd, NULL, NULL, NULL); - if (val == -1) - return -1; - - val = tty_off_xon_xoff (masterfd); - if (val == -1) - return -1; - - signal (SIGWINCH, sigwinch); - signal (SIGINT, sigint); - - val = init_readline (slavefd, slavefd); - if (val == -1) - return -1; - - val = tty_cbreak (STDIN_FILENO); - if (val == -1) - return -1; - - val = main_loop (); - - tty_reset (STDIN_FILENO); - - if (val == -1) - return -1; - - return 0; -} diff --git a/readline/examples/rltest.c b/readline/examples/rltest.c deleted file mode 100644 index 65abe87cc0..0000000000 --- a/readline/examples/rltest.c +++ /dev/null @@ -1,93 +0,0 @@ -/* **************************************************************** */ -/* */ -/* Testing Readline */ -/* */ -/* **************************************************************** */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -#include -#endif - -#include -#include - -#ifdef HAVE_STDLIB_H -# include -#else -extern void exit(); -#endif - -#ifdef READLINE_LIBRARY -# include "readline.h" -# include "history.h" -#else -# include -# include -#endif - -extern HIST_ENTRY **history_list (); - -int -main () -{ - char *temp, *prompt; - int done; - - temp = (char *)NULL; - prompt = "readline$ "; - done = 0; - - while (!done) - { - temp = readline (prompt); - - /* Test for EOF. */ - if (!temp) - exit (1); - - /* If there is anything on the line, print it and remember it. */ - if (*temp) - { - fprintf (stderr, "%s\r\n", temp); - add_history (temp); - } - - /* Check for `command' that we handle. */ - if (strcmp (temp, "quit") == 0) - done = 1; - - if (strcmp (temp, "list") == 0) - { - HIST_ENTRY **list; - register int i; - - list = history_list (); - if (list) - { - for (i = 0; list[i]; i++) - fprintf (stderr, "%d: %s\r\n", i, list[i]->line); - } - } - free (temp); - } - exit (0); -} diff --git a/readline/examples/rlversion.c b/readline/examples/rlversion.c deleted file mode 100644 index f36567becf..0000000000 --- a/readline/examples/rlversion.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * rlversion -- print out readline's version number - */ - -/* Copyright (C) 1987-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library for - reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include "posixstat.h" - -#ifdef HAVE_STDLIB_H -# include -#else -extern void exit(); -#endif - -#ifdef READLINE_LIBRARY -# include "readline.h" -#else -# include -#endif - -int -main() -{ - printf ("%s\n", rl_library_version ? rl_library_version : "unknown"); - exit (0); -} diff --git a/readline/funmap.c b/readline/funmap.c deleted file mode 100644 index aaf144de99..0000000000 --- a/readline/funmap.c +++ /dev/null @@ -1,269 +0,0 @@ -/* funmap.c -- attach names to functions. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#if !defined (BUFSIZ) -#include -#endif /* BUFSIZ */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include "rlconf.h" -#include "readline.h" - -#include "xmalloc.h" - -#ifdef __STDC__ -typedef int QSFUNC (const void *, const void *); -#else -typedef int QSFUNC (); -#endif - -extern int _rl_qsort_string_compare PARAMS((char **, char **)); - -FUNMAP **funmap; -static int funmap_size; -static int funmap_entry; - -/* After initializing the function map, this is the index of the first - program specific function. */ -int funmap_program_specific_entry_start; - -static const FUNMAP default_funmap[] = { - { "abort", rl_abort }, - { "accept-line", rl_newline }, - { "arrow-key-prefix", rl_arrow_keys }, - { "backward-byte", rl_backward_byte }, - { "backward-char", rl_backward_char }, - { "backward-delete-char", rl_rubout }, - { "backward-kill-line", rl_backward_kill_line }, - { "backward-kill-word", rl_backward_kill_word }, - { "backward-word", rl_backward_word }, - { "beginning-of-history", rl_beginning_of_history }, - { "beginning-of-line", rl_beg_of_line }, - { "bracketed-paste-begin", rl_bracketed_paste_begin }, - { "call-last-kbd-macro", rl_call_last_kbd_macro }, - { "capitalize-word", rl_capitalize_word }, - { "character-search", rl_char_search }, - { "character-search-backward", rl_backward_char_search }, - { "clear-screen", rl_clear_screen }, - { "complete", rl_complete }, - { "copy-backward-word", rl_copy_backward_word }, - { "copy-forward-word", rl_copy_forward_word }, - { "copy-region-as-kill", rl_copy_region_to_kill }, - { "delete-char", rl_delete }, - { "delete-char-or-list", rl_delete_or_show_completions }, - { "delete-horizontal-space", rl_delete_horizontal_space }, - { "digit-argument", rl_digit_argument }, - { "do-lowercase-version", rl_do_lowercase_version }, - { "downcase-word", rl_downcase_word }, - { "dump-functions", rl_dump_functions }, - { "dump-macros", rl_dump_macros }, - { "dump-variables", rl_dump_variables }, - { "emacs-editing-mode", rl_emacs_editing_mode }, - { "end-kbd-macro", rl_end_kbd_macro }, - { "end-of-history", rl_end_of_history }, - { "end-of-line", rl_end_of_line }, - { "exchange-point-and-mark", rl_exchange_point_and_mark }, - { "forward-backward-delete-char", rl_rubout_or_delete }, - { "forward-byte", rl_forward_byte }, - { "forward-char", rl_forward_char }, - { "forward-search-history", rl_forward_search_history }, - { "forward-word", rl_forward_word }, - { "history-search-backward", rl_history_search_backward }, - { "history-search-forward", rl_history_search_forward }, - { "history-substring-search-backward", rl_history_substr_search_backward }, - { "history-substring-search-forward", rl_history_substr_search_forward }, - { "insert-comment", rl_insert_comment }, - { "insert-completions", rl_insert_completions }, - { "kill-whole-line", rl_kill_full_line }, - { "kill-line", rl_kill_line }, - { "kill-region", rl_kill_region }, - { "kill-word", rl_kill_word }, - { "menu-complete", rl_menu_complete }, - { "menu-complete-backward", rl_backward_menu_complete }, - { "next-history", rl_get_next_history }, - { "next-screen-line", rl_next_screen_line }, - { "non-incremental-forward-search-history", rl_noninc_forward_search }, - { "non-incremental-reverse-search-history", rl_noninc_reverse_search }, - { "non-incremental-forward-search-history-again", rl_noninc_forward_search_again }, - { "non-incremental-reverse-search-history-again", rl_noninc_reverse_search_again }, - { "old-menu-complete", rl_old_menu_complete }, - { "overwrite-mode", rl_overwrite_mode }, -#if defined (_WIN32) - { "paste-from-clipboard", rl_paste_from_clipboard }, -#endif - { "possible-completions", rl_possible_completions }, - { "previous-history", rl_get_previous_history }, - { "previous-screen-line", rl_previous_screen_line }, - { "print-last-kbd-macro", rl_print_last_kbd_macro }, - { "quoted-insert", rl_quoted_insert }, - { "re-read-init-file", rl_re_read_init_file }, - { "redraw-current-line", rl_refresh_line}, - { "reverse-search-history", rl_reverse_search_history }, - { "revert-line", rl_revert_line }, - { "self-insert", rl_insert }, - { "set-mark", rl_set_mark }, - { "skip-csi-sequence", rl_skip_csi_sequence }, - { "start-kbd-macro", rl_start_kbd_macro }, - { "tab-insert", rl_tab_insert }, - { "tilde-expand", rl_tilde_expand }, - { "transpose-chars", rl_transpose_chars }, - { "transpose-words", rl_transpose_words }, - { "tty-status", rl_tty_status }, - { "undo", rl_undo_command }, - { "universal-argument", rl_universal_argument }, - { "unix-filename-rubout", rl_unix_filename_rubout }, - { "unix-line-discard", rl_unix_line_discard }, - { "unix-word-rubout", rl_unix_word_rubout }, - { "upcase-word", rl_upcase_word }, - { "yank", rl_yank }, - { "yank-last-arg", rl_yank_last_arg }, - { "yank-nth-arg", rl_yank_nth_arg }, - { "yank-pop", rl_yank_pop }, - -#if defined (VI_MODE) - { "vi-append-eol", rl_vi_append_eol }, - { "vi-append-mode", rl_vi_append_mode }, - { "vi-arg-digit", rl_vi_arg_digit }, - { "vi-back-to-indent", rl_vi_back_to_indent }, - { "vi-backward-bigword", rl_vi_bWord }, - { "vi-backward-word", rl_vi_bword }, - { "vi-bWord", rl_vi_bWord }, - { "vi-bword", rl_vi_bword }, - { "vi-change-case", rl_vi_change_case }, - { "vi-change-char", rl_vi_change_char }, - { "vi-change-to", rl_vi_change_to }, - { "vi-char-search", rl_vi_char_search }, - { "vi-column", rl_vi_column }, - { "vi-complete", rl_vi_complete }, - { "vi-delete", rl_vi_delete }, - { "vi-delete-to", rl_vi_delete_to }, - { "vi-eWord", rl_vi_eWord }, - { "vi-editing-mode", rl_vi_editing_mode }, - { "vi-end-bigword", rl_vi_eWord }, - { "vi-end-word", rl_vi_end_word }, - { "vi-eof-maybe", rl_vi_eof_maybe }, - { "vi-eword", rl_vi_eword }, - { "vi-fWord", rl_vi_fWord }, - { "vi-fetch-history", rl_vi_fetch_history }, - { "vi-first-print", rl_vi_first_print }, - { "vi-forward-bigword", rl_vi_fWord }, - { "vi-forward-word", rl_vi_fword }, - { "vi-fword", rl_vi_fword }, - { "vi-goto-mark", rl_vi_goto_mark }, - { "vi-insert-beg", rl_vi_insert_beg }, - { "vi-insertion-mode", rl_vi_insert_mode }, - { "vi-match", rl_vi_match }, - { "vi-movement-mode", rl_vi_movement_mode }, - { "vi-next-word", rl_vi_next_word }, - { "vi-overstrike", rl_vi_overstrike }, - { "vi-overstrike-delete", rl_vi_overstrike_delete }, - { "vi-prev-word", rl_vi_prev_word }, - { "vi-put", rl_vi_put }, - { "vi-redo", rl_vi_redo }, - { "vi-replace", rl_vi_replace }, - { "vi-rubout", rl_vi_rubout }, - { "vi-search", rl_vi_search }, - { "vi-search-again", rl_vi_search_again }, - { "vi-set-mark", rl_vi_set_mark }, - { "vi-subst", rl_vi_subst }, - { "vi-tilde-expand", rl_vi_tilde_expand }, - { "vi-unix-word-rubout", rl_vi_unix_word_rubout }, - { "vi-yank-arg", rl_vi_yank_arg }, - { "vi-yank-pop", rl_vi_yank_pop }, - { "vi-yank-to", rl_vi_yank_to }, -#endif /* VI_MODE */ - - {(char *)NULL, (rl_command_func_t *)NULL } -}; - -int -rl_add_funmap_entry (const char *name, rl_command_func_t *function) -{ - if (funmap_entry + 2 >= funmap_size) - { - funmap_size += 64; - funmap = (FUNMAP **)xrealloc (funmap, funmap_size * sizeof (FUNMAP *)); - } - - funmap[funmap_entry] = (FUNMAP *)xmalloc (sizeof (FUNMAP)); - funmap[funmap_entry]->name = name; - funmap[funmap_entry]->function = function; - - funmap[++funmap_entry] = (FUNMAP *)NULL; - return funmap_entry; -} - -static int funmap_initialized; - -/* Make the funmap contain all of the default entries. */ -void -rl_initialize_funmap (void) -{ - register int i; - - if (funmap_initialized) - return; - - for (i = 0; default_funmap[i].name; i++) - rl_add_funmap_entry (default_funmap[i].name, default_funmap[i].function); - - funmap_initialized = 1; - funmap_program_specific_entry_start = i; -} - -/* Produce a NULL terminated array of known function names. The array - is sorted. The array itself is allocated, but not the strings inside. - You should free () the array when you done, but not the pointers. */ -const char ** -rl_funmap_names (void) -{ - const char **result; - int result_size, result_index; - - /* Make sure that the function map has been initialized. */ - rl_initialize_funmap (); - - for (result_index = result_size = 0, result = (const char **)NULL; funmap[result_index]; result_index++) - { - if (result_index + 2 > result_size) - { - result_size += 20; - result = (const char **)xrealloc (result, result_size * sizeof (char *)); - } - - result[result_index] = funmap[result_index]->name; - result[result_index + 1] = (char *)NULL; - } - - qsort (result, result_index, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); - return (result); -} diff --git a/readline/histexpand.c b/readline/histexpand.c deleted file mode 100644 index adcf5dcb4e..0000000000 --- a/readline/histexpand.c +++ /dev/null @@ -1,1685 +0,0 @@ -/* histexpand.c -- history expansion. */ - -/* Copyright (C) 1989-2018 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_UNISTD_H) -# ifndef _MINIX -# include -# endif -# include -#endif - -#include "rlmbutil.h" - -#include "history.h" -#include "histlib.h" -#include "chardefs.h" - -#include "rlshell.h" -#include "xmalloc.h" - -#define HISTORY_WORD_DELIMITERS " \t\n;&()|<>" -#define HISTORY_QUOTE_CHARACTERS "\"'`" -#define HISTORY_EVENT_DELIMITERS "^$*%-" - -#define slashify_in_quotes "\\`\"$" - -#define fielddelim(c) (whitespace(c) || (c) == '\n') - -typedef int _hist_search_func_t PARAMS((const char *, int)); - -static char error_pointer; - -static char *subst_lhs; -static char *subst_rhs; -static int subst_lhs_len; -static int subst_rhs_len; - -/* Characters that delimit history event specifications and separate event - specifications from word designators. Static for now */ -static char *history_event_delimiter_chars = HISTORY_EVENT_DELIMITERS; - -static char *get_history_word_specifier PARAMS((char *, char *, int *)); -static int history_tokenize_word PARAMS((const char *, int)); -static char **history_tokenize_internal PARAMS((const char *, int, int *)); -static char *history_substring PARAMS((const char *, int, int)); -static void freewords PARAMS((char **, int)); -static char *history_find_word PARAMS((char *, int)); - -static char *quote_breaks PARAMS((char *)); - -/* Variables exported by this file. */ -/* The character that represents the start of a history expansion - request. This is usually `!'. */ -char history_expansion_char = '!'; - -/* The character that invokes word substitution if found at the start of - a line. This is usually `^'. */ -char history_subst_char = '^'; - -/* During tokenization, if this character is seen as the first character - of a word, then it, and all subsequent characters upto a newline are - ignored. For a Bourne shell, this should be '#'. Bash special cases - the interactive comment character to not be a comment delimiter. */ -char history_comment_char = '\0'; - -/* The list of characters which inhibit the expansion of text if found - immediately following history_expansion_char. */ -char *history_no_expand_chars = " \t\n\r="; - -/* If set to a non-zero value, single quotes inhibit history expansion. - The default is 0. */ -int history_quotes_inhibit_expansion = 0; - -/* Used to split words by history_tokenize_internal. */ -char *history_word_delimiters = HISTORY_WORD_DELIMITERS; - -/* If set, this points to a function that is called to verify that a - particular history expansion should be performed. */ -rl_linebuf_func_t *history_inhibit_expansion_function; - -int history_quoting_state = 0; - -/* **************************************************************** */ -/* */ -/* History Expansion */ -/* */ -/* **************************************************************** */ - -/* Hairy history expansion on text, not tokens. This is of general - use, and thus belongs in this library. */ - -/* The last string searched for by a !?string? search. */ -static char *search_string; -/* The last string matched by a !?string? search. */ -static char *search_match; - -/* Return the event specified at TEXT + OFFSET modifying OFFSET to - point to after the event specifier. Just a pointer to the history - line is returned; NULL is returned in the event of a bad specifier. - You pass STRING with *INDEX equal to the history_expansion_char that - begins this specification. - DELIMITING_QUOTE is a character that is allowed to end the string - specification for what to search for in addition to the normal - characters `:', ` ', `\t', `\n', and sometimes `?'. - So you might call this function like: - line = get_history_event ("!echo:p", &index, 0); */ -char * -get_history_event (const char *string, int *caller_index, int delimiting_quote) -{ - register int i; - register char c; - HIST_ENTRY *entry; - int which, sign, local_index, substring_okay; - _hist_search_func_t *search_func; - char *temp; - - /* The event can be specified in a number of ways. - - !! the previous command - !n command line N - !-n current command-line minus N - !str the most recent command starting with STR - !?str[?] - the most recent command containing STR - - All values N are determined via HISTORY_BASE. */ - - i = *caller_index; - - if (string[i] != history_expansion_char) - return ((char *)NULL); - - /* Move on to the specification. */ - i++; - - sign = 1; - substring_okay = 0; - -#define RETURN_ENTRY(e, w) \ - return ((e = history_get (w)) ? e->line : (char *)NULL) - - /* Handle !! case. */ - if (string[i] == history_expansion_char) - { - i++; - which = history_base + (history_length - 1); - *caller_index = i; - RETURN_ENTRY (entry, which); - } - - /* Hack case of numeric line specification. */ - if (string[i] == '-') - { - sign = -1; - i++; - } - - if (_rl_digit_p (string[i])) - { - /* Get the extent of the digits and compute the value. */ - for (which = 0; _rl_digit_p (string[i]); i++) - which = (which * 10) + _rl_digit_value (string[i]); - - *caller_index = i; - - if (sign < 0) - which = (history_length + history_base) - which; - - RETURN_ENTRY (entry, which); - } - - /* This must be something to search for. If the spec begins with - a '?', then the string may be anywhere on the line. Otherwise, - the string must be found at the start of a line. */ - if (string[i] == '?') - { - substring_okay++; - i++; - } - - /* Only a closing `?' or a newline delimit a substring search string. */ - for (local_index = i; c = string[i]; i++) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - int v; - mbstate_t ps; - - memset (&ps, 0, sizeof (mbstate_t)); - /* These produce warnings because we're passing a const string to a - function that takes a non-const string. */ - _rl_adjust_point ((char *)string, i, &ps); - if ((v = _rl_get_char_len ((char *)string + i, &ps)) > 1) - { - i += v - 1; - continue; - } - } - -#endif /* HANDLE_MULTIBYTE */ - if ((!substring_okay && (whitespace (c) || c == ':' || - (history_event_delimiter_chars && member (c, history_event_delimiter_chars)) || - (history_search_delimiter_chars && member (c, history_search_delimiter_chars)) || - string[i] == delimiting_quote)) || - string[i] == '\n' || - (substring_okay && string[i] == '?')) - break; - } - - which = i - local_index; - temp = (char *)xmalloc (1 + which); - if (which) - strncpy (temp, string + local_index, which); - temp[which] = '\0'; - - if (substring_okay && string[i] == '?') - i++; - - *caller_index = i; - -#define FAIL_SEARCH() \ - do { \ - history_offset = history_length; xfree (temp) ; return (char *)NULL; \ - } while (0) - - /* If there is no search string, try to use the previous search string, - if one exists. If not, fail immediately. */ - if (*temp == '\0' && substring_okay) - { - if (search_string) - { - xfree (temp); - temp = savestring (search_string); - } - else - FAIL_SEARCH (); - } - - search_func = substring_okay ? history_search : history_search_prefix; - while (1) - { - local_index = (*search_func) (temp, -1); - - if (local_index < 0) - FAIL_SEARCH (); - - if (local_index == 0 || substring_okay) - { - entry = current_history (); - if (entry == 0) - FAIL_SEARCH (); - history_offset = history_length; - - /* If this was a substring search, then remember the - string that we matched for word substitution. */ - if (substring_okay) - { - FREE (search_string); - search_string = temp; - - FREE (search_match); - search_match = history_find_word (entry->line, local_index); - } - else - xfree (temp); - - return (entry->line); - } - - if (history_offset) - history_offset--; - else - FAIL_SEARCH (); - } -#undef FAIL_SEARCH -#undef RETURN_ENTRY -} - -/* Function for extracting single-quoted strings. Used for inhibiting - history expansion within single quotes. */ - -/* Extract the contents of STRING as if it is enclosed in single quotes. - SINDEX, when passed in, is the offset of the character immediately - following the opening single quote; on exit, SINDEX is left pointing - to the closing single quote. FLAGS currently used to allow backslash - to escape a single quote (e.g., for bash $'...'). */ -static void -hist_string_extract_single_quoted (char *string, int *sindex, int flags) -{ - register int i; - - for (i = *sindex; string[i] && string[i] != '\''; i++) - { - if ((flags & 1) && string[i] == '\\' && string[i+1]) - i++; - } - - *sindex = i; -} - -static char * -quote_breaks (char *s) -{ - register char *p, *r; - char *ret; - int len = 3; - - for (p = s; p && *p; p++, len++) - { - if (*p == '\'') - len += 3; - else if (whitespace (*p) || *p == '\n') - len += 2; - } - - r = ret = (char *)xmalloc (len); - *r++ = '\''; - for (p = s; p && *p; ) - { - if (*p == '\'') - { - *r++ = '\''; - *r++ = '\\'; - *r++ = '\''; - *r++ = '\''; - p++; - } - else if (whitespace (*p) || *p == '\n') - { - *r++ = '\''; - *r++ = *p++; - *r++ = '\''; - } - else - *r++ = *p++; - } - *r++ = '\''; - *r = '\0'; - return ret; -} - -static char * -hist_error(char *s, int start, int current, int errtype) -{ - char *temp; - const char *emsg; - int ll, elen; - - ll = current - start; - - switch (errtype) - { - case EVENT_NOT_FOUND: - emsg = "event not found"; - elen = 15; - break; - case BAD_WORD_SPEC: - emsg = "bad word specifier"; - elen = 18; - break; - case SUBST_FAILED: - emsg = "substitution failed"; - elen = 19; - break; - case BAD_MODIFIER: - emsg = "unrecognized history modifier"; - elen = 29; - break; - case NO_PREV_SUBST: - emsg = "no previous substitution"; - elen = 24; - break; - default: - emsg = "unknown expansion error"; - elen = 23; - break; - } - - temp = (char *)xmalloc (ll + elen + 3); - strncpy (temp, s + start, ll); - temp[ll] = ':'; - temp[ll + 1] = ' '; - strcpy (temp + ll + 2, emsg); - return (temp); -} - -/* Get a history substitution string from STR starting at *IPTR - and return it. The length is returned in LENPTR. - - A backslash can quote the delimiter. If the string is the - empty string, the previous pattern is used. If there is - no previous pattern for the lhs, the last history search - string is used. - - If IS_RHS is 1, we ignore empty strings and set the pattern - to "" anyway. subst_lhs is not changed if the lhs is empty; - subst_rhs is allowed to be set to the empty string. */ - -static char * -get_subst_pattern (char *str, int *iptr, int delimiter, int is_rhs, int *lenptr) -{ - register int si, i, j, k; - char *s; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps; -#endif - - s = (char *)NULL; - i = *iptr; - -#if defined (HANDLE_MULTIBYTE) - memset (&ps, 0, sizeof (mbstate_t)); - _rl_adjust_point (str, i, &ps); -#endif - - for (si = i; str[si] && str[si] != delimiter; si++) -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - int v; - if ((v = _rl_get_char_len (str + si, &ps)) > 1) - si += v - 1; - else if (str[si] == '\\' && str[si + 1] == delimiter) - si++; - } - else -#endif /* HANDLE_MULTIBYTE */ - if (str[si] == '\\' && str[si + 1] == delimiter) - si++; - - if (si > i || is_rhs) - { - s = (char *)xmalloc (si - i + 1); - for (j = 0, k = i; k < si; j++, k++) - { - /* Remove a backslash quoting the search string delimiter. */ - if (str[k] == '\\' && str[k + 1] == delimiter) - k++; - s[j] = str[k]; - } - s[j] = '\0'; - if (lenptr) - *lenptr = j; - } - - i = si; - if (str[i]) - i++; - *iptr = i; - - return s; -} - -static void -postproc_subst_rhs (void) -{ - char *new; - int i, j, new_size; - - new = (char *)xmalloc (new_size = subst_rhs_len + subst_lhs_len); - for (i = j = 0; i < subst_rhs_len; i++) - { - if (subst_rhs[i] == '&') - { - if (j + subst_lhs_len >= new_size) - new = (char *)xrealloc (new, (new_size = new_size * 2 + subst_lhs_len)); - strcpy (new + j, subst_lhs); - j += subst_lhs_len; - } - else - { - /* a single backslash protects the `&' from lhs interpolation */ - if (subst_rhs[i] == '\\' && subst_rhs[i + 1] == '&') - i++; - if (j >= new_size) - new = (char *)xrealloc (new, new_size *= 2); - new[j++] = subst_rhs[i]; - } - } - new[j] = '\0'; - xfree (subst_rhs); - subst_rhs = new; - subst_rhs_len = j; -} - -/* Expand the bulk of a history specifier starting at STRING[START]. - Returns 0 if everything is OK, -1 if an error occurred, and 1 - if the `p' modifier was supplied and the caller should just print - the returned string. Returns the new index into string in - *END_INDEX_PTR, and the expanded specifier in *RET_STRING. */ -/* need current line for !# */ -static int -history_expand_internal (char *string, int start, int qc, int *end_index_ptr, char **ret_string, char *current_line) -{ - int i, n, starting_index; - int substitute_globally, subst_bywords, want_quotes, print_only; - char *event, *temp, *result, *tstr, *t, c, *word_spec; - int result_len; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps; - - memset (&ps, 0, sizeof (mbstate_t)); -#endif - - result = (char *)xmalloc (result_len = 128); - - i = start; - - /* If it is followed by something that starts a word specifier, - then !! is implied as the event specifier. */ - - if (member (string[i + 1], ":$*%^")) - { - char fake_s[3]; - int fake_i = 0; - i++; - fake_s[0] = fake_s[1] = history_expansion_char; - fake_s[2] = '\0'; - event = get_history_event (fake_s, &fake_i, 0); - } - else if (string[i + 1] == '#') - { - i += 2; - event = current_line; - } - else - event = get_history_event (string, &i, qc); - - if (event == 0) - { - *ret_string = hist_error (string, start, i, EVENT_NOT_FOUND); - xfree (result); - return (-1); - } - - /* If a word specifier is found, then do what that requires. */ - starting_index = i; - word_spec = get_history_word_specifier (string, event, &i); - - /* There is no such thing as a `malformed word specifier'. However, - it is possible for a specifier that has no match. In that case, - we complain. */ - if (word_spec == (char *)&error_pointer) - { - *ret_string = hist_error (string, starting_index, i, BAD_WORD_SPEC); - xfree (result); - return (-1); - } - - /* If no word specifier, than the thing of interest was the event. */ - temp = word_spec ? savestring (word_spec) : savestring (event); - FREE (word_spec); - - /* Perhaps there are other modifiers involved. Do what they say. */ - want_quotes = substitute_globally = subst_bywords = print_only = 0; - starting_index = i; - - while (string[i] == ':') - { - c = string[i + 1]; - - if (c == 'g' || c == 'a') - { - substitute_globally = 1; - i++; - c = string[i + 1]; - } - else if (c == 'G') - { - subst_bywords = 1; - i++; - c = string[i + 1]; - } - - switch (c) - { - default: - *ret_string = hist_error (string, i+1, i+2, BAD_MODIFIER); - xfree (result); - xfree (temp); - return -1; - - case 'q': - want_quotes = 'q'; - break; - - case 'x': - want_quotes = 'x'; - break; - - /* :p means make this the last executed line. So we - return an error state after adding this line to the - history. */ - case 'p': - print_only++; - break; - - /* :t discards all but the last part of the pathname. */ - case 't': - tstr = strrchr (temp, '/'); - if (tstr) - { - tstr++; - t = savestring (tstr); - xfree (temp); - temp = t; - } - break; - - /* :h discards the last part of a pathname. */ - case 'h': - tstr = strrchr (temp, '/'); - if (tstr) - *tstr = '\0'; - break; - - /* :r discards the suffix. */ - case 'r': - tstr = strrchr (temp, '.'); - if (tstr) - *tstr = '\0'; - break; - - /* :e discards everything but the suffix. */ - case 'e': - tstr = strrchr (temp, '.'); - if (tstr) - { - t = savestring (tstr); - xfree (temp); - temp = t; - } - break; - - /* :s/this/that substitutes `that' for the first - occurrence of `this'. :gs/this/that substitutes `that' - for each occurrence of `this'. :& repeats the last - substitution. :g& repeats the last substitution - globally. */ - - case '&': - case 's': - { - char *new_event; - int delimiter, failed, si, l_temp, ws, we; - - if (c == 's') - { - if (i + 2 < (int)strlen (string)) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - _rl_adjust_point (string, i + 2, &ps); - if (_rl_get_char_len (string + i + 2, &ps) > 1) - delimiter = 0; - else - delimiter = string[i + 2]; - } - else -#endif /* HANDLE_MULTIBYTE */ - delimiter = string[i + 2]; - } - else - break; /* no search delimiter */ - - i += 3; - - t = get_subst_pattern (string, &i, delimiter, 0, &subst_lhs_len); - /* An empty substitution lhs with no previous substitution - uses the last search string as the lhs. */ - if (t) - { - FREE (subst_lhs); - subst_lhs = t; - } - else if (!subst_lhs) - { - if (search_string && *search_string) - { - subst_lhs = savestring (search_string); - subst_lhs_len = strlen (subst_lhs); - } - else - { - subst_lhs = (char *) NULL; - subst_lhs_len = 0; - } - } - - FREE (subst_rhs); - subst_rhs = get_subst_pattern (string, &i, delimiter, 1, &subst_rhs_len); - - /* If `&' appears in the rhs, it's supposed to be replaced - with the lhs. */ - if (member ('&', subst_rhs)) - postproc_subst_rhs (); - } - else - i += 2; - - /* If there is no lhs, the substitution can't succeed. */ - if (subst_lhs_len == 0) - { - *ret_string = hist_error (string, starting_index, i, NO_PREV_SUBST); - xfree (result); - xfree (temp); - return -1; - } - - l_temp = strlen (temp); - /* Ignore impossible cases. */ - if (subst_lhs_len > l_temp) - { - *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); - xfree (result); - xfree (temp); - return (-1); - } - - /* Find the first occurrence of THIS in TEMP. */ - /* Substitute SUBST_RHS for SUBST_LHS in TEMP. There are three - cases to consider: - - 1. substitute_globally == subst_bywords == 0 - 2. substitute_globally == 1 && subst_bywords == 0 - 3. substitute_globally == 0 && subst_bywords == 1 - - In the first case, we substitute for the first occurrence only. - In the second case, we substitute for every occurrence. - In the third case, we tokenize into words and substitute the - first occurrence of each word. */ - - si = we = 0; - for (failed = 1; (si + subst_lhs_len) <= l_temp; si++) - { - /* First skip whitespace and find word boundaries if - we're past the end of the word boundary we found - the last time. */ - if (subst_bywords && si > we) - { - for (; temp[si] && fielddelim (temp[si]); si++) - ; - ws = si; - we = history_tokenize_word (temp, si); - } - - if (STREQN (temp+si, subst_lhs, subst_lhs_len)) - { - int len = subst_rhs_len - subst_lhs_len + l_temp; - new_event = (char *)xmalloc (1 + len); - strncpy (new_event, temp, si); - strncpy (new_event + si, subst_rhs, subst_rhs_len); - strncpy (new_event + si + subst_rhs_len, - temp + si + subst_lhs_len, - l_temp - (si + subst_lhs_len)); - new_event[len] = '\0'; - xfree (temp); - temp = new_event; - - failed = 0; - - if (substitute_globally) - { - /* Reported to fix a bug that causes it to skip every - other match when matching a single character. Was - si += subst_rhs_len previously. */ - si += subst_rhs_len - 1; - l_temp = strlen (temp); - substitute_globally++; - continue; - } - else if (subst_bywords) - { - si = we; - l_temp = strlen (temp); - continue; - } - else - break; - } - } - - if (substitute_globally > 1) - { - substitute_globally = 0; - continue; /* don't want to increment i */ - } - - if (failed == 0) - continue; /* don't want to increment i */ - - *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); - xfree (result); - xfree (temp); - return (-1); - } - } - i += 2; - } - /* Done with modifiers. */ - /* Believe it or not, we have to back the pointer up by one. */ - --i; - - if (want_quotes) - { - char *x; - - if (want_quotes == 'q') - x = sh_single_quote (temp); - else if (want_quotes == 'x') - x = quote_breaks (temp); - else - x = savestring (temp); - - xfree (temp); - temp = x; - } - - n = strlen (temp); - if (n >= result_len) - result = (char *)xrealloc (result, n + 2); - strcpy (result, temp); - xfree (temp); - - *end_index_ptr = i; - *ret_string = result; - return (print_only); -} - -/* Expand the string STRING, placing the result into OUTPUT, a pointer - to a string. Returns: - - -1) If there was an error in expansion. - 0) If no expansions took place (or, if the only change in - the text was the de-slashifying of the history expansion - character) - 1) If expansions did take place - 2) If the `p' modifier was given and the caller should print the result - - If an error occurred in expansion, then OUTPUT contains a descriptive - error message. */ - -#define ADD_STRING(s) \ - do \ - { \ - int sl = strlen (s); \ - j += sl; \ - if (j >= result_len) \ - { \ - while (j >= result_len) \ - result_len += 128; \ - result = (char *)xrealloc (result, result_len); \ - } \ - strcpy (result + j - sl, s); \ - } \ - while (0) - -#define ADD_CHAR(c) \ - do \ - { \ - if (j >= result_len - 1) \ - result = (char *)xrealloc (result, result_len += 64); \ - result[j++] = c; \ - result[j] = '\0'; \ - } \ - while (0) - -int -history_expand (char *hstring, char **output) -{ - register int j; - int i, r, l, passc, cc, modified, eindex, only_printing, dquote, squote, flag; - char *string; - - /* The output string, and its length. */ - int result_len; - char *result; - -#if defined (HANDLE_MULTIBYTE) - char mb[MB_LEN_MAX]; - mbstate_t ps; -#endif - - /* Used when adding the string. */ - char *temp; - - if (output == 0) - return 0; - - /* Setting the history expansion character to 0 inhibits all - history expansion. */ - if (history_expansion_char == 0) - { - *output = savestring (hstring); - return (0); - } - - /* Prepare the buffer for printing error messages. */ - result = (char *)xmalloc (result_len = 256); - result[0] = '\0'; - - only_printing = modified = 0; - l = strlen (hstring); - - /* Grovel the string. Only backslash and single quotes can quote the - history escape character. We also handle arg specifiers. */ - - /* Before we grovel forever, see if the history_expansion_char appears - anywhere within the text. */ - - /* The quick substitution character is a history expansion all right. That - is to say, "^this^that^" is equivalent to "!!:s^this^that^", and in fact, - that is the substitution that we do. */ - if (hstring[0] == history_subst_char) - { - string = (char *)xmalloc (l + 5); - - string[0] = string[1] = history_expansion_char; - string[2] = ':'; - string[3] = 's'; - strcpy (string + 4, hstring); - l += 4; - } - else - { -#if defined (HANDLE_MULTIBYTE) - memset (&ps, 0, sizeof (mbstate_t)); -#endif - - string = hstring; - /* If not quick substitution, still maybe have to do expansion. */ - - /* `!' followed by one of the characters in history_no_expand_chars - is NOT an expansion. */ - dquote = history_quoting_state == '"'; - squote = history_quoting_state == '\''; - - /* If the calling application tells us we are already reading a - single-quoted string, consume the rest of the string right now - and then go on. */ - i = 0; - if (squote && history_quotes_inhibit_expansion) - { - hist_string_extract_single_quoted (string, &i, 0); - squote = 0; - if (string[i]) - i++; - } - - for ( ; string[i]; i++) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - int v; - v = _rl_get_char_len (string + i, &ps); - if (v > 1) - { - i += v - 1; - continue; - } - } -#endif /* HANDLE_MULTIBYTE */ - - cc = string[i + 1]; - /* The history_comment_char, if set, appearing at the beginning - of a word signifies that the rest of the line should not have - history expansion performed on it. - Skip the rest of the line and break out of the loop. */ - if (history_comment_char && string[i] == history_comment_char && - dquote == 0 && - (i == 0 || member (string[i - 1], history_word_delimiters))) - { - while (string[i]) - i++; - break; - } - else if (string[i] == history_expansion_char) - { - if (cc == 0 || member (cc, history_no_expand_chars)) - continue; - /* DQUOTE won't be set unless history_quotes_inhibit_expansion - is set. The idea here is to treat double-quoted strings the - same as the word outside double quotes; in effect making the - double quote part of history_no_expand_chars when DQUOTE is - set. */ - else if (dquote && cc == '"') - continue; - /* If the calling application has set - history_inhibit_expansion_function to a function that checks - for special cases that should not be history expanded, - call the function and skip the expansion if it returns a - non-zero value. */ - else if (history_inhibit_expansion_function && - (*history_inhibit_expansion_function) (string, i)) - continue; - else - break; - } - /* Shell-like quoting: allow backslashes to quote double quotes - inside a double-quoted string. */ - else if (dquote && string[i] == '\\' && cc == '"') - i++; - /* More shell-like quoting: if we're paying attention to single - quotes and letting them quote the history expansion character, - then we need to pay attention to double quotes, because single - quotes are not special inside double-quoted strings. */ - else if (history_quotes_inhibit_expansion && string[i] == '"') - { - dquote = 1 - dquote; - } - else if (dquote == 0 && history_quotes_inhibit_expansion && string[i] == '\'') - { - /* If this is bash, single quotes inhibit history expansion. */ - flag = (i > 0 && string[i - 1] == '$'); - i++; - hist_string_extract_single_quoted (string, &i, flag); - } - else if (history_quotes_inhibit_expansion && string[i] == '\\') - { - /* If this is bash, allow backslashes to quote single - quotes and the history expansion character. */ - if (cc == '\'' || cc == history_expansion_char) - i++; - } - - } - - if (string[i] != history_expansion_char) - { - xfree (result); - *output = savestring (string); - return (0); - } - } - - /* Extract and perform the substitution. */ - dquote = history_quoting_state == '"'; - squote = history_quoting_state == '\''; - - /* If the calling application tells us we are already reading a - single-quoted string, consume the rest of the string right now - and then go on. */ - i = j = 0; - if (squote && history_quotes_inhibit_expansion) - { - int c; - - hist_string_extract_single_quoted (string, &i, 0); - squote = 0; - for (c = 0; c < i; c++) - ADD_CHAR (string[c]); - if (string[i]) - { - ADD_CHAR (string[i]); - i++; - } - } - - for (passc = 0; i < l; i++) - { - int qc, tchar = string[i]; - - if (passc) - { - passc = 0; - ADD_CHAR (tchar); - continue; - } - -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - int k, c; - - c = tchar; - memset (mb, 0, sizeof (mb)); - for (k = 0; k < MB_LEN_MAX; k++) - { - mb[k] = (char)c; - memset (&ps, 0, sizeof (mbstate_t)); - if (_rl_get_char_len (mb, &ps) == -2) - c = string[++i]; - else - break; - } - if (strlen (mb) > 1) - { - ADD_STRING (mb); - continue; - } - } -#endif /* HANDLE_MULTIBYTE */ - - if (tchar == history_expansion_char) - tchar = -3; - else if (tchar == history_comment_char) - tchar = -2; - - switch (tchar) - { - default: - ADD_CHAR (string[i]); - break; - - case '\\': - passc++; - ADD_CHAR (tchar); - break; - - case '"': - dquote = 1 - dquote; - ADD_CHAR (tchar); - break; - - case '\'': - { - /* If history_quotes_inhibit_expansion is set, single quotes - inhibit history expansion, otherwise they are treated like - double quotes. */ - if (squote) - { - squote = 0; - ADD_CHAR (tchar); - } - else if (dquote == 0 && history_quotes_inhibit_expansion) - { - int quote, slen; - - flag = (i > 0 && string[i - 1] == '$'); - quote = i++; - hist_string_extract_single_quoted (string, &i, flag); - - slen = i - quote + 2; - temp = (char *)xmalloc (slen); - strncpy (temp, string + quote, slen); - temp[slen - 1] = '\0'; - ADD_STRING (temp); - xfree (temp); - } - else if (dquote == 0 && squote == 0 && history_quotes_inhibit_expansion == 0) - { - squote = 1; - ADD_CHAR (string[i]); - } - else - ADD_CHAR (string[i]); - break; - } - - case -2: /* history_comment_char */ - if ((dquote == 0 || history_quotes_inhibit_expansion == 0) && - (i == 0 || member (string[i - 1], history_word_delimiters))) - { - temp = (char *)xmalloc (l - i + 1); - strcpy (temp, string + i); - ADD_STRING (temp); - xfree (temp); - i = l; - } - else - ADD_CHAR (string[i]); - break; - - case -3: /* history_expansion_char */ - cc = string[i + 1]; - - /* If the history_expansion_char is followed by one of the - characters in history_no_expand_chars, then it is not a - candidate for expansion of any kind. */ - if (cc == 0 || member (cc, history_no_expand_chars) || - (dquote && cc == '"') || - (history_inhibit_expansion_function && (*history_inhibit_expansion_function) (string, i))) - { - ADD_CHAR (string[i]); - break; - } - -#if defined (NO_BANG_HASH_MODIFIERS) - /* There is something that is listed as a `word specifier' in csh - documentation which means `the expanded text to this point'. - That is not a word specifier, it is an event specifier. If we - don't want to allow modifiers with `!#', just stick the current - output line in again. */ - if (cc == '#') - { - if (result) - { - temp = (char *)xmalloc (1 + strlen (result)); - strcpy (temp, result); - ADD_STRING (temp); - xfree (temp); - } - i++; - break; - } -#endif - qc = squote ? '\'' : (dquote ? '"' : 0); - r = history_expand_internal (string, i, qc, &eindex, &temp, result); - if (r < 0) - { - *output = temp; - xfree (result); - if (string != hstring) - xfree (string); - return -1; - } - else - { - if (temp) - { - modified++; - if (*temp) - ADD_STRING (temp); - xfree (temp); - } - only_printing += r == 1; - i = eindex; - } - break; - } - } - - *output = result; - if (string != hstring) - xfree (string); - - if (only_printing) - { -#if 0 - add_history (result); -#endif - return (2); - } - - return (modified != 0); -} - -/* Return a consed string which is the word specified in SPEC, and found - in FROM. NULL is returned if there is no spec. The address of - ERROR_POINTER is returned if the word specified cannot be found. - CALLER_INDEX is the offset in SPEC to start looking; it is updated - to point to just after the last character parsed. */ -static char * -get_history_word_specifier (char *spec, char *from, int *caller_index) -{ - register int i = *caller_index; - int first, last; - int expecting_word_spec = 0; - char *result; - - /* The range of words to return doesn't exist yet. */ - first = last = 0; - result = (char *)NULL; - - /* If we found a colon, then this *must* be a word specification. If - it isn't, then it is an error. */ - if (spec[i] == ':') - { - i++; - expecting_word_spec++; - } - - /* Handle special cases first. */ - - /* `%' is the word last searched for. */ - if (spec[i] == '%') - { - *caller_index = i + 1; - return (search_match ? savestring (search_match) : savestring ("")); - } - - /* `*' matches all of the arguments, but not the command. */ - if (spec[i] == '*') - { - *caller_index = i + 1; - result = history_arg_extract (1, '$', from); - return (result ? result : savestring ("")); - } - - /* `$' is last arg. */ - if (spec[i] == '$') - { - *caller_index = i + 1; - return (history_arg_extract ('$', '$', from)); - } - - /* Try to get FIRST and LAST figured out. */ - - if (spec[i] == '-') - first = 0; - else if (spec[i] == '^') - { - first = 1; - i++; - } - else if (_rl_digit_p (spec[i]) && expecting_word_spec) - { - for (first = 0; _rl_digit_p (spec[i]); i++) - first = (first * 10) + _rl_digit_value (spec[i]); - } - else - return ((char *)NULL); /* no valid `first' for word specifier */ - - if (spec[i] == '^' || spec[i] == '*') - { - last = (spec[i] == '^') ? 1 : '$'; /* x* abbreviates x-$ */ - i++; - } - else if (spec[i] != '-') - last = first; - else - { - i++; - - if (_rl_digit_p (spec[i])) - { - for (last = 0; _rl_digit_p (spec[i]); i++) - last = (last * 10) + _rl_digit_value (spec[i]); - } - else if (spec[i] == '$') - { - i++; - last = '$'; - } -#if 0 - else if (!spec[i] || spec[i] == ':') - /* check against `:' because there could be a modifier separator */ -#else - else - /* csh seems to allow anything to terminate the word spec here, - leaving it as an abbreviation. */ -#endif - last = -1; /* x- abbreviates x-$ omitting word `$' */ - } - - *caller_index = i; - - if (last >= first || last == '$' || last < 0) - result = history_arg_extract (first, last, from); - - return (result ? result : (char *)&error_pointer); -} - -/* Extract the args specified, starting at FIRST, and ending at LAST. - The args are taken from STRING. If either FIRST or LAST is < 0, - then make that arg count from the right (subtract from the number of - tokens, so that FIRST = -1 means the next to last token on the line). - If LAST is `$' the last arg from STRING is used. */ -char * -history_arg_extract (int first, int last, const char *string) -{ - register int i, len; - char *result; - int size, offset; - char **list; - - /* XXX - think about making history_tokenize return a struct array, - each struct in array being a string and a length to avoid the - calls to strlen below. */ - if ((list = history_tokenize (string)) == NULL) - return ((char *)NULL); - - for (len = 0; list[len]; len++) - ; - - if (last < 0) - last = len + last - 1; - - if (first < 0) - first = len + first - 1; - - if (last == '$') - last = len - 1; - - if (first == '$') - first = len - 1; - - last++; - - if (first >= len || last > len || first < 0 || last < 0 || first > last) - result = ((char *)NULL); - else - { - for (size = 0, i = first; i < last; i++) - size += strlen (list[i]) + 1; - result = (char *)xmalloc (size + 1); - result[0] = '\0'; - - for (i = first, offset = 0; i < last; i++) - { - strcpy (result + offset, list[i]); - offset += strlen (list[i]); - if (i + 1 < last) - { - result[offset++] = ' '; - result[offset] = 0; - } - } - } - - for (i = 0; i < len; i++) - xfree (list[i]); - xfree (list); - - return (result); -} - -static int -history_tokenize_word (const char *string, int ind) -{ - register int i, j; - int delimiter, nestdelim, delimopen; - - i = ind; - delimiter = nestdelim = 0; - - if (member (string[i], "()\n")) /* XXX - included \n, but why? been here forever */ - { - i++; - return i; - } - - if (ISDIGIT (string[i])) - { - j = i; - while (string[j] && ISDIGIT (string[j])) - j++; - if (string[j] == 0) - return (j); - if (string[j] == '<' || string[j] == '>') - i = j; /* digit sequence is a file descriptor */ - else - { - i = j; - goto get_word; /* digit sequence is part of a word */ - } - } - - if (member (string[i], "<>;&|")) - { - int peek = string[i + 1]; - - if (peek == string[i]) - { - if (peek == '<' && string[i + 2] == '-') - i++; - else if (peek == '<' && string[i + 2] == '<') - i++; - i += 2; - return i; - } - else if (peek == '&' && (string[i] == '>' || string[i] == '<')) - { - j = i + 2; - while (string[j] && ISDIGIT (string[j])) /* file descriptor */ - j++; - if (string[j] =='-') /* <&[digits]-, >&[digits]- */ - j++; - return j; - } - else if ((peek == '>' && string[i] == '&') || (peek == '|' && string[i] == '>')) - { - i += 2; - return i; - } - /* XXX - process substitution -- separated out for later -- bash-4.2 */ - else if (peek == '(' && (string[i] == '>' || string[i] == '<')) /*)*/ - { - i += 2; - delimopen = '('; - delimiter = ')'; - nestdelim = 1; - goto get_word; - } - - i++; - return i; - } - -get_word: - /* Get word from string + i; */ - - if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS)) - delimiter = string[i++]; - - for (; string[i]; i++) - { - if (string[i] == '\\' && string[i + 1] == '\n') - { - i++; - continue; - } - - if (string[i] == '\\' && delimiter != '\'' && - (delimiter != '"' || member (string[i], slashify_in_quotes))) - { - i++; - continue; - } - - /* delimiter must be set and set to something other than a quote if - nestdelim is set, so these tests are safe. */ - if (nestdelim && string[i] == delimopen) - { - nestdelim++; - continue; - } - if (nestdelim && string[i] == delimiter) - { - nestdelim--; - if (nestdelim == 0) - delimiter = 0; - continue; - } - - if (delimiter && string[i] == delimiter) - { - delimiter = 0; - continue; - } - - /* Command and process substitution; shell extended globbing patterns */ - if (nestdelim == 0 && delimiter == 0 && member (string[i], "<>$!@?+*") && string[i+1] == '(') /*)*/ - { - i += 2; - delimopen = '('; - delimiter = ')'; - nestdelim = 1; - continue; - } - - if (delimiter == 0 && (member (string[i], history_word_delimiters))) - break; - - if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS)) - delimiter = string[i]; - } - - return i; -} - -static char * -history_substring (const char *string, int start, int end) -{ - register int len; - register char *result; - - len = end - start; - result = (char *)xmalloc (len + 1); - strncpy (result, string + start, len); - result[len] = '\0'; - return result; -} - -/* Parse STRING into tokens and return an array of strings. If WIND is - not -1 and INDP is not null, we also want the word surrounding index - WIND. The position in the returned array of strings is returned in - *INDP. */ -static char ** -history_tokenize_internal (const char *string, int wind, int *indp) -{ - char **result; - register int i, start, result_index, size; - - /* If we're searching for a string that's not part of a word (e.g., " "), - make sure we set *INDP to a reasonable value. */ - if (indp && wind != -1) - *indp = -1; - - /* Get a token, and stuff it into RESULT. The tokens are split - exactly where the shell would split them. */ - for (i = result_index = size = 0, result = (char **)NULL; string[i]; ) - { - /* Skip leading whitespace. */ - for (; string[i] && fielddelim (string[i]); i++) - ; - if (string[i] == 0 || string[i] == history_comment_char) - return (result); - - start = i; - - i = history_tokenize_word (string, start); - - /* If we have a non-whitespace delimiter character (which would not be - skipped by the loop above), use it and any adjacent delimiters to - make a separate field. Any adjacent white space will be skipped the - next time through the loop. */ - if (i == start && history_word_delimiters) - { - i++; - while (string[i] && member (string[i], history_word_delimiters)) - i++; - } - - /* If we are looking for the word in which the character at a - particular index falls, remember it. */ - if (indp && wind != -1 && wind >= start && wind < i) - *indp = result_index; - - if (result_index + 2 >= size) - result = (char **)xrealloc (result, ((size += 10) * sizeof (char *))); - - result[result_index++] = history_substring (string, start, i); - result[result_index] = (char *)NULL; - } - - return (result); -} - -/* Return an array of tokens, much as the shell might. The tokens are - parsed out of STRING. */ -char ** -history_tokenize (const char *string) -{ - return (history_tokenize_internal (string, -1, (int *)NULL)); -} - -/* Free members of WORDS from START to an empty string */ -static void -freewords (char **words, int start) -{ - register int i; - - for (i = start; words[i]; i++) - xfree (words[i]); -} - -/* Find and return the word which contains the character at index IND - in the history line LINE. Used to save the word matched by the - last history !?string? search. */ -static char * -history_find_word (char *line, int ind) -{ - char **words, *s; - int i, wind; - - words = history_tokenize_internal (line, ind, &wind); - if (wind == -1 || words == 0) - { - if (words) - freewords (words, 0); - FREE (words); - return ((char *)NULL); - } - s = words[wind]; - for (i = 0; i < wind; i++) - xfree (words[i]); - freewords (words, wind + 1); - xfree (words); - return s; -} diff --git a/readline/histfile.c b/readline/histfile.c deleted file mode 100644 index dc64bde1c5..0000000000 --- a/readline/histfile.c +++ /dev/null @@ -1,791 +0,0 @@ -/* histfile.c - functions to manipulate the history file. */ - -/* Copyright (C) 1989-2018 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -/* The goal is to make the implementation transparent, so that you - don't have to know what data types are used, just what functions - you can call. I think I have done that. */ - -#define READLINE_LIBRARY - -#if defined (__TANDEM) -# include -#endif - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_LIMITS_H) -# include -#endif - -#include -#if ! defined (_MINIX) && defined (HAVE_SYS_FILE_H) -# include -#endif -#include "posixstat.h" -#include - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif - -#include - -#if defined (__EMX__) -# undef HAVE_MMAP -#endif - -#ifdef HISTORY_USE_MMAP -# include - -# ifdef MAP_FILE -# define MAP_RFLAGS (MAP_FILE|MAP_PRIVATE) -# define MAP_WFLAGS (MAP_FILE|MAP_SHARED) -# else -# define MAP_RFLAGS MAP_PRIVATE -# define MAP_WFLAGS MAP_SHARED -# endif - -# ifndef MAP_FAILED -# define MAP_FAILED ((void *)-1) -# endif - -#endif /* HISTORY_USE_MMAP */ - -/* If we're compiling for __EMX__ (OS/2) or __CYGWIN__ (cygwin32 environment - on win 95/98/nt), we want to open files with O_BINARY mode so that there - is no \n -> \r\n conversion performed. On other systems, we don't want to - mess around with O_BINARY at all, so we ensure that it's defined to 0. */ -#if defined (__EMX__) || defined (__CYGWIN__) -# ifndef O_BINARY -# define O_BINARY 0 -# endif -#else /* !__EMX__ && !__CYGWIN__ */ -# undef O_BINARY -# define O_BINARY 0 -#endif /* !__EMX__ && !__CYGWIN__ */ - -#include -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -#include "history.h" -#include "histlib.h" - -#include "rlshell.h" -#include "xmalloc.h" - -#if !defined (PATH_MAX) -# define PATH_MAX 1024 /* default */ -#endif - -extern void _hs_append_history_line PARAMS((int, const char *)); - -/* history file version; currently unused */ -int history_file_version = 1; - -/* If non-zero, we write timestamps to the history file in history_do_write() */ -int history_write_timestamps = 0; - -/* If non-zero, we assume that a history file that starts with a timestamp - uses timestamp-delimited entries and can include multi-line history - entries. Used by read_history_range */ -int history_multiline_entries = 0; - -/* Immediately after a call to read_history() or read_history_range(), this - will return the number of lines just read from the history file in that - call. */ -int history_lines_read_from_file = 0; - -/* Immediately after a call to write_history() or history_do_write(), this - will return the number of lines just written to the history file in that - call. This also works with history_truncate_file. */ -int history_lines_written_to_file = 0; - -/* Does S look like the beginning of a history timestamp entry? Placeholder - for more extensive tests. */ -#define HIST_TIMESTAMP_START(s) (*(s) == history_comment_char && isdigit ((unsigned char)(s)[1]) ) - -static char *history_backupfile PARAMS((const char *)); -static char *history_tempfile PARAMS((const char *)); -static int histfile_backup PARAMS((const char *, const char *)); -static int histfile_restore PARAMS((const char *, const char *)); - -/* Return the string that should be used in the place of this - filename. This only matters when you don't specify the - filename to read_history (), or write_history (). */ -static char * -history_filename (const char *filename) -{ - char *return_val; - const char *home; - int home_len; - - return_val = filename ? savestring (filename) : (char *)NULL; - - if (return_val) - return (return_val); - - home = sh_get_env_value ("HOME"); -#if defined (_WIN32) - if (home == 0) - home = sh_get_env_value ("APPDATA"); -#endif - - if (home == 0) - return (NULL); - else - home_len = strlen (home); - - return_val = (char *)xmalloc (2 + home_len + 8); /* strlen(".history") == 8 */ - strcpy (return_val, home); - return_val[home_len] = '/'; -#if defined (__MSDOS__) - strcpy (return_val + home_len + 1, "_history"); -#else - strcpy (return_val + home_len + 1, ".history"); -#endif - - return (return_val); -} - -static char * -history_backupfile (const char *filename) -{ - const char *fn; - char *ret, linkbuf[PATH_MAX+1]; - size_t len; - ssize_t n; - struct stat fs; - - fn = filename; -#if defined (HAVE_READLINK) - /* Follow symlink to avoid backing up symlink itself; call will fail if - not a symlink */ - if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) - { - linkbuf[n] = '\0'; - fn = linkbuf; - } -#endif - - len = strlen (fn); - ret = xmalloc (len + 2); - strcpy (ret, fn); - ret[len] = '-'; - ret[len+1] = '\0'; - return ret; -} - -static char * -history_tempfile (const char *filename) -{ - const char *fn; - char *ret, linkbuf[PATH_MAX+1]; - size_t len; - ssize_t n; - struct stat fs; - int pid; - - fn = filename; -#if defined (HAVE_READLINK) - /* Follow symlink so tempfile created in the same directory as any symlinked - history file; call will fail if not a symlink */ - if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) - { - linkbuf[n] = '\0'; - fn = linkbuf; - } -#endif - - len = strlen (fn); - ret = xmalloc (len + 11); - strcpy (ret, fn); - - pid = (int)getpid (); - - /* filename-PID.tmp */ - ret[len] = '-'; - ret[len+1] = (pid / 10000 % 10) + '0'; - ret[len+2] = (pid / 1000 % 10) + '0'; - ret[len+3] = (pid / 100 % 10) + '0'; - ret[len+4] = (pid / 10 % 10) + '0'; - ret[len+5] = (pid % 10) + '0'; - strcpy (ret + len + 6, ".tmp"); - - return ret; -} - -/* Add the contents of FILENAME to the history list, a line at a time. - If FILENAME is NULL, then read from ~/.history. Returns 0 if - successful, or errno if not. */ -int -read_history (const char *filename) -{ - return (read_history_range (filename, 0, -1)); -} - -/* Read a range of lines from FILENAME, adding them to the history list. - Start reading at the FROM'th line and end at the TO'th. If FROM - is zero, start at the beginning. If TO is less than FROM, read - until the end of the file. If FILENAME is NULL, then read from - ~/.history. Returns 0 if successful, or errno if not. */ -int -read_history_range (const char *filename, int from, int to) -{ - register char *line_start, *line_end, *p; - char *input, *buffer, *bufend, *last_ts; - int file, current_line, chars_read, has_timestamps, reset_comment_char; - struct stat finfo; - size_t file_size; -#if defined (EFBIG) - int overflow_errno = EFBIG; -#elif defined (EOVERFLOW) - int overflow_errno = EOVERFLOW; -#else - int overflow_errno = EIO; -#endif - - history_lines_read_from_file = 0; - - buffer = last_ts = (char *)NULL; - input = history_filename (filename); - file = input ? open (input, O_RDONLY|O_BINARY, 0666) : -1; - - if ((file < 0) || (fstat (file, &finfo) == -1)) - goto error_and_exit; - - if (S_ISREG (finfo.st_mode) == 0) - { -#ifdef EFTYPE - errno = EFTYPE; -#else - errno = EINVAL; -#endif - goto error_and_exit; - } - - file_size = (size_t)finfo.st_size; - - /* check for overflow on very large files */ - if (file_size != finfo.st_size || file_size + 1 < file_size) - { - errno = overflow_errno; - goto error_and_exit; - } - - if (file_size == 0) - { - free (input); - return 0; /* don't waste time if we don't have to */ - } - -#ifdef HISTORY_USE_MMAP - /* We map read/write and private so we can change newlines to NULs without - affecting the underlying object. */ - buffer = (char *)mmap (0, file_size, PROT_READ|PROT_WRITE, MAP_RFLAGS, file, 0); - if ((void *)buffer == MAP_FAILED) - { - errno = overflow_errno; - goto error_and_exit; - } - chars_read = file_size; -#else - buffer = (char *)malloc (file_size + 1); - if (buffer == 0) - { - errno = overflow_errno; - goto error_and_exit; - } - - chars_read = read (file, buffer, file_size); -#endif - if (chars_read < 0) - { - error_and_exit: - if (errno != 0) - chars_read = errno; - else - chars_read = EIO; - if (file >= 0) - close (file); - - FREE (input); -#ifndef HISTORY_USE_MMAP - FREE (buffer); -#endif - - return (chars_read); - } - - close (file); - - /* Set TO to larger than end of file if negative. */ - if (to < 0) - to = chars_read; - - /* Start at beginning of file, work to end. */ - bufend = buffer + chars_read; - *bufend = '\0'; /* null-terminate buffer for timestamp checks */ - current_line = 0; - - /* Heuristic: the history comment character rarely changes, so assume we - have timestamps if the buffer starts with `#[:digit:]' and temporarily - set history_comment_char so timestamp parsing works right */ - reset_comment_char = 0; - if (history_comment_char == '\0' && buffer[0] == '#' && isdigit ((unsigned char)buffer[1])) - { - history_comment_char = '#'; - reset_comment_char = 1; - } - - has_timestamps = HIST_TIMESTAMP_START (buffer); - history_multiline_entries += has_timestamps && history_write_timestamps; - - /* Skip lines until we are at FROM. */ - for (line_start = line_end = buffer; line_end < bufend && current_line < from; line_end++) - if (*line_end == '\n') - { - p = line_end + 1; - /* If we see something we think is a timestamp, continue with this - line. We should check more extensively here... */ - if (HIST_TIMESTAMP_START(p) == 0) - current_line++; - line_start = p; - } - - /* If there are lines left to gobble, then gobble them now. */ - for (line_end = line_start; line_end < bufend; line_end++) - if (*line_end == '\n') - { - /* Change to allow Windows-like \r\n end of line delimiter. */ - if (line_end > line_start && line_end[-1] == '\r') - line_end[-1] = '\0'; - else - *line_end = '\0'; - - if (*line_start) - { - if (HIST_TIMESTAMP_START(line_start) == 0) - { - if (last_ts == NULL && history_length > 0 && history_multiline_entries) - _hs_append_history_line (history_length - 1, line_start); - else - add_history (line_start); - if (last_ts) - { - add_history_time (last_ts); - last_ts = NULL; - } - } - else - { - last_ts = line_start; - current_line--; - } - } - - current_line++; - - if (current_line >= to) - break; - - line_start = line_end + 1; - } - - history_lines_read_from_file = current_line; - if (reset_comment_char) - history_comment_char = '\0'; - - FREE (input); -#ifndef HISTORY_USE_MMAP - FREE (buffer); -#else - munmap (buffer, file_size); -#endif - - return (0); -} - -/* Save FILENAME to BACK, handling case where FILENAME is a symlink - (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */ -static int -histfile_backup (const char *filename, const char *back) -{ -#if defined (HAVE_READLINK) - char linkbuf[PATH_MAX+1]; - ssize_t n; - - /* Follow to target of symlink to avoid renaming symlink itself */ - if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) - { - linkbuf[n] = '\0'; - return (rename (linkbuf, back)); - } -#endif - return (rename (filename, back)); -} - -/* Restore ORIG from BACKUP handling case where ORIG is a symlink - (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */ -static int -histfile_restore (const char *backup, const char *orig) -{ -#if defined (HAVE_READLINK) - char linkbuf[PATH_MAX+1]; - ssize_t n; - - /* Follow to target of symlink to avoid renaming symlink itself */ - if ((n = readlink (orig, linkbuf, sizeof (linkbuf) - 1)) > 0) - { - linkbuf[n] = '\0'; - return (rename (backup, linkbuf)); - } -#endif - return (rename (backup, orig)); -} - -/* Truncate the history file FNAME, leaving only LINES trailing lines. - If FNAME is NULL, then use ~/.history. Writes a new file and renames - it to the original name. Returns 0 on success, errno on failure. */ -int -history_truncate_file (const char *fname, int lines) -{ - char *buffer, *filename, *tempname, *bp, *bp1; /* bp1 == bp+1 */ - int file, chars_read, rv, orig_lines, exists, r; - struct stat finfo; - size_t file_size; - - history_lines_written_to_file = 0; - - buffer = (char *)NULL; - filename = history_filename (fname); - tempname = 0; - file = filename ? open (filename, O_RDONLY|O_BINARY, 0666) : -1; - rv = exists = 0; - - /* Don't try to truncate non-regular files. */ - if (file == -1 || fstat (file, &finfo) == -1) - { - rv = errno; - if (file != -1) - close (file); - goto truncate_exit; - } - exists = 1; - - if (S_ISREG (finfo.st_mode) == 0) - { - close (file); -#ifdef EFTYPE - rv = EFTYPE; -#else - rv = EINVAL; -#endif - goto truncate_exit; - } - - file_size = (size_t)finfo.st_size; - - /* check for overflow on very large files */ - if (file_size != finfo.st_size || file_size + 1 < file_size) - { - close (file); -#if defined (EFBIG) - rv = errno = EFBIG; -#elif defined (EOVERFLOW) - rv = errno = EOVERFLOW; -#else - rv = errno = EINVAL; -#endif - goto truncate_exit; - } - - buffer = (char *)malloc (file_size + 1); - if (buffer == 0) - { - rv = errno; - close (file); - goto truncate_exit; - } - - chars_read = read (file, buffer, file_size); - close (file); - - if (chars_read <= 0) - { - rv = (chars_read < 0) ? errno : 0; - goto truncate_exit; - } - - orig_lines = lines; - /* Count backwards from the end of buffer until we have passed - LINES lines. bp1 is set funny initially. But since bp[1] can't - be a comment character (since it's off the end) and *bp can't be - both a newline and the history comment character, it should be OK. */ - for (bp1 = bp = buffer + chars_read - 1; lines && bp > buffer; bp--) - { - if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0) - lines--; - bp1 = bp; - } - - /* If this is the first line, then the file contains exactly the - number of lines we want to truncate to, so we don't need to do - anything. It's the first line if we don't find a newline between - the current value of i and 0. Otherwise, write from the start of - this line until the end of the buffer. */ - for ( ; bp > buffer; bp--) - { - if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0) - { - bp++; - break; - } - bp1 = bp; - } - - /* Write only if there are more lines in the file than we want to - truncate to. */ - if (bp <= buffer) - { - rv = 0; - /* No-op if LINES == 0 at this point */ - history_lines_written_to_file = orig_lines - lines; - goto truncate_exit; - } - - tempname = history_tempfile (filename); - - if ((file = open (tempname, O_WRONLY|O_CREAT|O_TRUNC|O_BINARY, 0600)) != -1) - { - if (write (file, bp, chars_read - (bp - buffer)) < 0) - rv = errno; - - if (close (file) < 0 && rv == 0) - rv = errno; - } - else - rv = errno; - - truncate_exit: - FREE (buffer); - - history_lines_written_to_file = orig_lines - lines; - - if (rv == 0 && filename && tempname) - rv = histfile_restore (tempname, filename); - - if (rv != 0) - { - if (tempname) - unlink (tempname); - history_lines_written_to_file = 0; - } - -#if defined (HAVE_CHOWN) - /* Make sure the new filename is owned by the same user as the old. If one - user is running this, it's a no-op. If the shell is running after sudo - with a shared history file, we don't want to leave the history file - owned by root. */ - if (rv == 0 && exists) - r = chown (filename, finfo.st_uid, finfo.st_gid); -#endif - - xfree (filename); - FREE (tempname); - - return rv; -} - -/* Workhorse function for writing history. Writes the last NELEMENT entries - from the history list to FILENAME. OVERWRITE is non-zero if you - wish to replace FILENAME with the entries. */ -static int -history_do_write (const char *filename, int nelements, int overwrite) -{ - register int i; - char *output, *tempname, *histname; - int file, mode, rv, exists; - struct stat finfo; -#ifdef HISTORY_USE_MMAP - size_t cursize; - - history_lines_written_to_file = 0; - - mode = overwrite ? O_RDWR|O_CREAT|O_TRUNC|O_BINARY : O_RDWR|O_APPEND|O_BINARY; -#else - mode = overwrite ? O_WRONLY|O_CREAT|O_TRUNC|O_BINARY : O_WRONLY|O_APPEND|O_BINARY; -#endif - histname = history_filename (filename); - exists = histname ? (stat (histname, &finfo) == 0) : 0; - - tempname = (overwrite && exists && S_ISREG (finfo.st_mode)) ? history_tempfile (histname) : 0; - output = tempname ? tempname : histname; - - file = output ? open (output, mode, 0600) : -1; - rv = 0; - - if (file == -1) - { - rv = errno; - FREE (histname); - FREE (tempname); - return (rv); - } - -#ifdef HISTORY_USE_MMAP - cursize = overwrite ? 0 : lseek (file, 0, SEEK_END); -#endif - - if (nelements > history_length) - nelements = history_length; - - /* Build a buffer of all the lines to write, and write them in one syscall. - Suggested by Peter Ho (peter@robosts.oxford.ac.uk). */ - { - HIST_ENTRY **the_history; /* local */ - register int j; - int buffer_size; - char *buffer; - - the_history = history_list (); - /* Calculate the total number of bytes to write. */ - for (buffer_size = 0, i = history_length - nelements; i < history_length; i++) -#if 0 - buffer_size += 2 + HISTENT_BYTES (the_history[i]); -#else - { - if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0]) - buffer_size += strlen (the_history[i]->timestamp) + 1; - buffer_size += strlen (the_history[i]->line) + 1; - } -#endif - - /* Allocate the buffer, and fill it. */ -#ifdef HISTORY_USE_MMAP - if (ftruncate (file, buffer_size+cursize) == -1) - goto mmap_error; - buffer = (char *)mmap (0, buffer_size, PROT_READ|PROT_WRITE, MAP_WFLAGS, file, cursize); - if ((void *)buffer == MAP_FAILED) - { -mmap_error: - rv = errno; - close (file); - if (tempname) - unlink (tempname); - FREE (histname); - FREE (tempname); - return rv; - } -#else - buffer = (char *)malloc (buffer_size); - if (buffer == 0) - { - rv = errno; - close (file); - if (tempname) - unlink (tempname); - FREE (histname); - FREE (tempname); - return rv; - } -#endif - - for (j = 0, i = history_length - nelements; i < history_length; i++) - { - if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0]) - { - strcpy (buffer + j, the_history[i]->timestamp); - j += strlen (the_history[i]->timestamp); - buffer[j++] = '\n'; - } - strcpy (buffer + j, the_history[i]->line); - j += strlen (the_history[i]->line); - buffer[j++] = '\n'; - } - -#ifdef HISTORY_USE_MMAP - if (msync (buffer, buffer_size, MS_ASYNC) != 0 || munmap (buffer, buffer_size) != 0) - rv = errno; -#else - if (write (file, buffer, buffer_size) < 0) - rv = errno; - xfree (buffer); -#endif - } - - history_lines_written_to_file = nelements; - - if (close (file) < 0 && rv == 0) - rv = errno; - - if (rv == 0 && histname && tempname) - rv = histfile_restore (tempname, histname); - - if (rv != 0) - { - if (tempname) - unlink (tempname); - history_lines_written_to_file = 0; - } - -#if defined (HAVE_CHOWN) - /* Make sure the new filename is owned by the same user as the old. If one - user is running this, it's a no-op. If the shell is running after sudo - with a shared history file, we don't want to leave the history file - owned by root. */ - if (rv == 0 && exists) - mode = chown (histname, finfo.st_uid, finfo.st_gid); -#endif - - FREE (histname); - FREE (tempname); - - return (rv); -} - -/* Append NELEMENT entries to FILENAME. The entries appended are from - the end of the list minus NELEMENTs up to the end of the list. */ -int -append_history (int nelements, const char *filename) -{ - return (history_do_write (filename, nelements, HISTORY_APPEND)); -} - -/* Overwrite FILENAME with the current history. If FILENAME is NULL, - then write the history list to ~/.history. Values returned - are as in read_history ().*/ -int -write_history (const char *filename) -{ - return (history_do_write (filename, history_length, HISTORY_OVERWRITE)); -} diff --git a/readline/histlib.h b/readline/histlib.h deleted file mode 100644 index 9627b24500..0000000000 --- a/readline/histlib.h +++ /dev/null @@ -1,85 +0,0 @@ -/* histlib.h -- internal definitions for the history library. */ - -/* Copyright (C) 1989-2009 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -#if !defined (_HISTLIB_H_) -#define _HISTLIB_H_ - -#if defined (HAVE_STRING_H) -# include -#else -# include -#endif /* !HAVE_STRING_H */ - -#if !defined (STREQ) -#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) -#define STREQN(a, b, n) (((n) == 0) ? (1) \ - : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) -#endif - -#ifndef savestring -#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x)) -#endif - -#ifndef whitespace -#define whitespace(c) (((c) == ' ') || ((c) == '\t')) -#endif - -#ifndef _rl_digit_p -#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') -#endif - -#ifndef _rl_digit_value -#define _rl_digit_value(c) ((c) - '0') -#endif - -#ifndef member -# if !defined (strchr) && !defined (__STDC__) -extern char *strchr (); -# endif /* !strchr && !__STDC__ */ -#define member(c, s) ((c) ? ((char *)strchr ((s), (c)) != (char *)NULL) : 0) -#endif - -#ifndef FREE -# define FREE(x) if (x) free (x) -#endif - -/* Possible history errors passed to hist_error. */ -#define EVENT_NOT_FOUND 0 -#define BAD_WORD_SPEC 1 -#define SUBST_FAILED 2 -#define BAD_MODIFIER 3 -#define NO_PREV_SUBST 4 - -/* Possible definitions for history starting point specification. */ -#define NON_ANCHORED_SEARCH 0 -#define ANCHORED_SEARCH 0x01 -#define PATTERN_SEARCH 0x02 - -/* Possible definitions for what style of writing the history file we want. */ -#define HISTORY_APPEND 0 -#define HISTORY_OVERWRITE 1 - -/* internal extern function declarations used by other parts of the library */ - -/* histsearch.c */ -extern int _hs_history_patsearch PARAMS((const char *, int, int)); - -#endif /* !_HISTLIB_H_ */ diff --git a/readline/history.c b/readline/history.c deleted file mode 100644 index 67158b14bc..0000000000 --- a/readline/history.c +++ /dev/null @@ -1,607 +0,0 @@ -/* history.c -- standalone history library */ - -/* Copyright (C) 1989-2017 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -/* The goal is to make the implementation transparent, so that you - don't have to know what data types are used, just what functions - you can call. I think I have done that. */ -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_UNISTD_H) -# ifdef _MINIX -# include -# endif -# include -#endif - -#include - -#include "history.h" -#include "histlib.h" - -#include "xmalloc.h" - -#if !defined (errno) -extern int errno; -#endif - -/* How big to make the_history when we first allocate it. */ -#define DEFAULT_HISTORY_INITIAL_SIZE 502 - -#define MAX_HISTORY_INITIAL_SIZE 8192 - -/* The number of slots to increase the_history by. */ -#define DEFAULT_HISTORY_GROW_SIZE 50 - -static char *hist_inittime PARAMS((void)); - -/* **************************************************************** */ -/* */ -/* History Functions */ -/* */ -/* **************************************************************** */ - -/* An array of HIST_ENTRY. This is where we store the history. */ -static HIST_ENTRY **the_history = (HIST_ENTRY **)NULL; - -/* Non-zero means that we have enforced a limit on the amount of - history that we save. */ -static int history_stifled; - -/* The current number of slots allocated to the input_history. */ -static int history_size; - -/* If HISTORY_STIFLED is non-zero, then this is the maximum number of - entries to remember. */ -int history_max_entries; -int max_input_history; /* backwards compatibility */ - -/* The current location of the interactive history pointer. Just makes - life easier for outside callers. */ -int history_offset; - -/* The number of strings currently stored in the history list. */ -int history_length; - -/* The logical `base' of the history array. It defaults to 1. */ -int history_base = 1; - -/* Return the current HISTORY_STATE of the history. */ -HISTORY_STATE * -history_get_history_state (void) -{ - HISTORY_STATE *state; - - state = (HISTORY_STATE *)xmalloc (sizeof (HISTORY_STATE)); - state->entries = the_history; - state->offset = history_offset; - state->length = history_length; - state->size = history_size; - state->flags = 0; - if (history_stifled) - state->flags |= HS_STIFLED; - - return (state); -} - -/* Set the state of the current history array to STATE. */ -void -history_set_history_state (HISTORY_STATE *state) -{ - the_history = state->entries; - history_offset = state->offset; - history_length = state->length; - history_size = state->size; - if (state->flags & HS_STIFLED) - history_stifled = 1; -} - -/* Begin a session in which the history functions might be used. This - initializes interactive variables. */ -void -using_history (void) -{ - history_offset = history_length; -} - -/* Return the number of bytes that the primary history entries are using. - This just adds up the lengths of the_history->lines and the associated - timestamps. */ -int -history_total_bytes (void) -{ - register int i, result; - - for (i = result = 0; the_history && the_history[i]; i++) - result += HISTENT_BYTES (the_history[i]); - - return (result); -} - -/* Returns the magic number which says what history element we are - looking at now. In this implementation, it returns history_offset. */ -int -where_history (void) -{ - return (history_offset); -} - -/* Make the current history item be the one at POS, an absolute index. - Returns zero if POS is out of range, else non-zero. */ -int -history_set_pos (int pos) -{ - if (pos > history_length || pos < 0 || !the_history) - return (0); - history_offset = pos; - return (1); -} - -/* Return the current history array. The caller has to be careful, since this - is the actual array of data, and could be bashed or made corrupt easily. - The array is terminated with a NULL pointer. */ -HIST_ENTRY ** -history_list (void) -{ - return (the_history); -} - -/* Return the history entry at the current position, as determined by - history_offset. If there is no entry there, return a NULL pointer. */ -HIST_ENTRY * -current_history (void) -{ - return ((history_offset == history_length) || the_history == 0) - ? (HIST_ENTRY *)NULL - : the_history[history_offset]; -} - -/* Back up history_offset to the previous history entry, and return - a pointer to that entry. If there is no previous entry then return - a NULL pointer. */ -HIST_ENTRY * -previous_history (void) -{ - return history_offset ? the_history[--history_offset] : (HIST_ENTRY *)NULL; -} - -/* Move history_offset forward to the next history entry, and return - a pointer to that entry. If there is no next entry then return a - NULL pointer. */ -HIST_ENTRY * -next_history (void) -{ - return (history_offset == history_length) ? (HIST_ENTRY *)NULL : the_history[++history_offset]; -} - -/* Return the history entry which is logically at OFFSET in the history array. - OFFSET is relative to history_base. */ -HIST_ENTRY * -history_get (int offset) -{ - int local_index; - - local_index = offset - history_base; - return (local_index >= history_length || local_index < 0 || the_history == 0) - ? (HIST_ENTRY *)NULL - : the_history[local_index]; -} - -HIST_ENTRY * -alloc_history_entry (char *string, char *ts) -{ - HIST_ENTRY *temp; - - temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); - - temp->line = string ? savestring (string) : string; - temp->data = (char *)NULL; - temp->timestamp = ts; - - return temp; -} - -time_t -history_get_time (HIST_ENTRY *hist) -{ - char *ts; - time_t t; - - if (hist == 0 || hist->timestamp == 0) - return 0; - ts = hist->timestamp; - if (ts[0] != history_comment_char) - return 0; - errno = 0; - t = (time_t) strtol (ts + 1, (char **)NULL, 10); /* XXX - should use strtol() here */ - if (errno == ERANGE) - return (time_t)0; - return t; -} - -static char * -hist_inittime (void) -{ - time_t t; - char ts[64], *ret; - - t = (time_t) time ((time_t *)0); -#if defined (HAVE_VSNPRINTF) /* assume snprintf if vsnprintf exists */ - snprintf (ts, sizeof (ts) - 1, "X%lu", (unsigned long) t); -#else - sprintf (ts, "X%lu", (unsigned long) t); -#endif - ret = savestring (ts); - ret[0] = history_comment_char; - - return ret; -} - -/* Place STRING at the end of the history list. The data field - is set to NULL. */ -void -add_history (const char *string) -{ - HIST_ENTRY *temp; - int new_length; - - if (history_stifled && (history_length == history_max_entries)) - { - register int i; - - /* If the history is stifled, and history_length is zero, - and it equals history_max_entries, we don't save items. */ - if (history_length == 0) - return; - - /* If there is something in the slot, then remove it. */ - if (the_history[0]) - (void) free_history_entry (the_history[0]); - - /* Copy the rest of the entries, moving down one slot. Copy includes - trailing NULL. */ - memmove (the_history, the_history + 1, history_length * sizeof (HIST_ENTRY *)); - - new_length = history_length; - history_base++; - } - else - { - if (history_size == 0) - { - if (history_stifled && history_max_entries > 0) - history_size = (history_max_entries > MAX_HISTORY_INITIAL_SIZE) - ? MAX_HISTORY_INITIAL_SIZE - : history_max_entries + 2; - else - history_size = DEFAULT_HISTORY_INITIAL_SIZE; - the_history = (HIST_ENTRY **)xmalloc (history_size * sizeof (HIST_ENTRY *)); - new_length = 1; - } - else - { - if (history_length == (history_size - 1)) - { - history_size += DEFAULT_HISTORY_GROW_SIZE; - the_history = (HIST_ENTRY **) - xrealloc (the_history, history_size * sizeof (HIST_ENTRY *)); - } - new_length = history_length + 1; - } - } - - temp = alloc_history_entry ((char *)string, hist_inittime ()); - - the_history[new_length] = (HIST_ENTRY *)NULL; - the_history[new_length - 1] = temp; - history_length = new_length; -} - -/* Change the time stamp of the most recent history entry to STRING. */ -void -add_history_time (const char *string) -{ - HIST_ENTRY *hs; - - if (string == 0 || history_length < 1) - return; - hs = the_history[history_length - 1]; - FREE (hs->timestamp); - hs->timestamp = savestring (string); -} - -/* Free HIST and return the data so the calling application can free it - if necessary and desired. */ -histdata_t -free_history_entry (HIST_ENTRY *hist) -{ - histdata_t x; - - if (hist == 0) - return ((histdata_t) 0); - FREE (hist->line); - FREE (hist->timestamp); - x = hist->data; - xfree (hist); - return (x); -} - -HIST_ENTRY * -copy_history_entry (HIST_ENTRY *hist) -{ - HIST_ENTRY *ret; - char *ts; - - if (hist == 0) - return hist; - - ret = alloc_history_entry (hist->line, (char *)NULL); - - ts = hist->timestamp ? savestring (hist->timestamp) : hist->timestamp; - ret->timestamp = ts; - - ret->data = hist->data; - - return ret; -} - -/* Make the history entry at WHICH have LINE and DATA. This returns - the old entry so you can dispose of the data. In the case of an - invalid WHICH, a NULL pointer is returned. */ -HIST_ENTRY * -replace_history_entry (int which, const char *line, histdata_t data) -{ - HIST_ENTRY *temp, *old_value; - - if (which < 0 || which >= history_length) - return ((HIST_ENTRY *)NULL); - - temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); - old_value = the_history[which]; - - temp->line = savestring (line); - temp->data = data; - temp->timestamp = savestring (old_value->timestamp); - the_history[which] = temp; - - return (old_value); -} - -/* Append LINE to the history line at offset WHICH, adding a newline to the - end of the current line first. This can be used to construct multi-line - history entries while reading lines from the history file. */ -void -_hs_append_history_line (int which, const char *line) -{ - HIST_ENTRY *hent; - size_t newlen, curlen, minlen; - char *newline; - - hent = the_history[which]; - curlen = strlen (hent->line); - minlen = curlen + strlen (line) + 2; /* min space needed */ - if (curlen > 256) /* XXX - for now */ - { - newlen = 512; /* now realloc in powers of 2 */ - /* we recalcluate every time; the operations are cheap */ - while (newlen < minlen) - newlen <<= 1; - } - else - newlen = minlen; - /* Assume that realloc returns the same pointer and doesn't try a new - alloc/copy if the new size is the same as the one last passed. */ - newline = realloc (hent->line, newlen); - if (newline) - { - hent->line = newline; - hent->line[curlen++] = '\n'; - strcpy (hent->line + curlen, line); - } -} - -/* Replace the DATA in the specified history entries, replacing OLD with - NEW. WHICH says which one(s) to replace: WHICH == -1 means to replace - all of the history entries where entry->data == OLD; WHICH == -2 means - to replace the `newest' history entry where entry->data == OLD; and - WHICH >= 0 means to replace that particular history entry's data, as - long as it matches OLD. */ -void -_hs_replace_history_data (int which, histdata_t *old, histdata_t *new) -{ - HIST_ENTRY *entry; - register int i, last; - - if (which < -2 || which >= history_length || history_length == 0 || the_history == 0) - return; - - if (which >= 0) - { - entry = the_history[which]; - if (entry && entry->data == old) - entry->data = new; - return; - } - - last = -1; - for (i = 0; i < history_length; i++) - { - entry = the_history[i]; - if (entry == 0) - continue; - if (entry->data == old) - { - last = i; - if (which == -1) - entry->data = new; - } - } - if (which == -2 && last >= 0) - { - entry = the_history[last]; - entry->data = new; /* XXX - we don't check entry->old */ - } -} - -/* Remove history element WHICH from the history. The removed - element is returned to you so you can free the line, data, - and containing structure. */ -HIST_ENTRY * -remove_history (int which) -{ - HIST_ENTRY *return_value; - register int i; -#if 1 - int nentries; - HIST_ENTRY **start, **end; -#endif - - if (which < 0 || which >= history_length || history_length == 0 || the_history == 0) - return ((HIST_ENTRY *)NULL); - - return_value = the_history[which]; - -#if 1 - /* Copy the rest of the entries, moving down one slot. Copy includes - trailing NULL. */ - nentries = history_length - which; - start = the_history + which; - end = start + 1; - memmove (start, end, nentries * sizeof (HIST_ENTRY *)); -#else - for (i = which; i < history_length; i++) - the_history[i] = the_history[i + 1]; -#endif - - history_length--; - - return (return_value); -} - -HIST_ENTRY ** -remove_history_range (int first, int last) -{ - HIST_ENTRY **return_value; - register int i; - int nentries; - HIST_ENTRY **start, **end; - - if (the_history == 0 || history_length == 0) - return ((HIST_ENTRY **)NULL); - if (first < 0 || first >= history_length || last < 0 || last >= history_length) - return ((HIST_ENTRY **)NULL); - if (first > last) - return (HIST_ENTRY **)NULL; - - nentries = last - first + 1; - return_value = (HIST_ENTRY **)malloc ((nentries + 1) * sizeof (HIST_ENTRY *)); - if (return_value == 0) - return return_value; - - /* Return all the deleted entries in a list */ - for (i = first ; i <= last; i++) - return_value[i - first] = the_history[i]; - return_value[i - first] = (HIST_ENTRY *)NULL; - - /* Copy the rest of the entries, moving down NENTRIES slots. Copy includes - trailing NULL. */ - start = the_history + first; - end = the_history + last + 1; - memmove (start, end, (history_length - last) * sizeof (HIST_ENTRY *)); - - history_length -= nentries; - - return (return_value); -} - -/* Stifle the history list, remembering only MAX number of lines. */ -void -stifle_history (int max) -{ - register int i, j; - - if (max < 0) - max = 0; - - if (history_length > max) - { - /* This loses because we cannot free the data. */ - for (i = 0, j = history_length - max; i < j; i++) - free_history_entry (the_history[i]); - - history_base = i; - for (j = 0, i = history_length - max; j < max; i++, j++) - the_history[j] = the_history[i]; - the_history[j] = (HIST_ENTRY *)NULL; - history_length = j; - } - - history_stifled = 1; - max_input_history = history_max_entries = max; -} - -/* Stop stifling the history. This returns the previous maximum - number of history entries. The value is positive if the history - was stifled, negative if it wasn't. */ -int -unstifle_history (void) -{ - if (history_stifled) - { - history_stifled = 0; - return (history_max_entries); - } - else - return (-history_max_entries); -} - -int -history_is_stifled (void) -{ - return (history_stifled); -} - -void -clear_history (void) -{ - register int i; - - /* This loses because we cannot free the data. */ - for (i = 0; i < history_length; i++) - { - free_history_entry (the_history[i]); - the_history[i] = (HIST_ENTRY *)NULL; - } - - history_offset = history_length = 0; - history_base = 1; /* reset history base to default */ -} diff --git a/readline/history.h b/readline/history.h deleted file mode 100644 index cc3de29a64..0000000000 --- a/readline/history.h +++ /dev/null @@ -1,286 +0,0 @@ -/* history.h -- the names of functions that you can call in history. */ - -/* Copyright (C) 1989-2015 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -#ifndef _HISTORY_H_ -#define _HISTORY_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#include /* XXX - for history timestamp code */ - -#if defined READLINE_LIBRARY -# include "rlstdc.h" -# include "rltypedefs.h" -#else -# include -# include -#endif - -#ifdef __STDC__ -typedef void *histdata_t; -#else -typedef char *histdata_t; -#endif - -/* The structure used to store a history entry. */ -typedef struct _hist_entry { - char *line; - char *timestamp; /* char * rather than time_t for read/write */ - histdata_t data; -} HIST_ENTRY; - -/* Size of the history-library-managed space in history entry HS. */ -#define HISTENT_BYTES(hs) (strlen ((hs)->line) + strlen ((hs)->timestamp)) - -/* A structure used to pass the current state of the history stuff around. */ -typedef struct _hist_state { - HIST_ENTRY **entries; /* Pointer to the entries themselves. */ - int offset; /* The location pointer within this array. */ - int length; /* Number of elements within this array. */ - int size; /* Number of slots allocated to this array. */ - int flags; -} HISTORY_STATE; - -/* Flag values for the `flags' member of HISTORY_STATE. */ -#define HS_STIFLED 0x01 - -/* Initialization and state management. */ - -/* Begin a session in which the history functions might be used. This - just initializes the interactive variables. */ -extern void using_history PARAMS((void)); - -/* Return the current HISTORY_STATE of the history. */ -extern HISTORY_STATE *history_get_history_state PARAMS((void)); - -/* Set the state of the current history array to STATE. */ -extern void history_set_history_state PARAMS((HISTORY_STATE *)); - -/* Manage the history list. */ - -/* Place STRING at the end of the history list. - The associated data field (if any) is set to NULL. */ -extern void add_history PARAMS((const char *)); - -/* Change the timestamp associated with the most recent history entry to - STRING. */ -extern void add_history_time PARAMS((const char *)); - -/* Remove an entry from the history list. WHICH is the magic number that - tells us which element to delete. The elements are numbered from 0. */ -extern HIST_ENTRY *remove_history PARAMS((int)); - -/* Remove a set of entries from the history list: FIRST to LAST, inclusive */ -extern HIST_ENTRY **remove_history_range PARAMS((int, int)); - -/* Allocate a history entry consisting of STRING and TIMESTAMP and return - a pointer to it. */ -extern HIST_ENTRY *alloc_history_entry PARAMS((char *, char *)); - -/* Copy the history entry H, but not the (opaque) data pointer */ -extern HIST_ENTRY *copy_history_entry PARAMS((HIST_ENTRY *)); - -/* Free the history entry H and return any application-specific data - associated with it. */ -extern histdata_t free_history_entry PARAMS((HIST_ENTRY *)); - -/* Make the history entry at WHICH have LINE and DATA. This returns - the old entry so you can dispose of the data. In the case of an - invalid WHICH, a NULL pointer is returned. */ -extern HIST_ENTRY *replace_history_entry PARAMS((int, const char *, histdata_t)); - -/* Clear the history list and start over. */ -extern void clear_history PARAMS((void)); - -/* Stifle the history list, remembering only MAX number of entries. */ -extern void stifle_history PARAMS((int)); - -/* Stop stifling the history. This returns the previous amount the - history was stifled by. The value is positive if the history was - stifled, negative if it wasn't. */ -extern int unstifle_history PARAMS((void)); - -/* Return 1 if the history is stifled, 0 if it is not. */ -extern int history_is_stifled PARAMS((void)); - -/* Information about the history list. */ - -/* Return a NULL terminated array of HIST_ENTRY which is the current input - history. Element 0 of this list is the beginning of time. If there - is no history, return NULL. */ -extern HIST_ENTRY **history_list PARAMS((void)); - -/* Returns the number which says what history element we are now - looking at. */ -extern int where_history PARAMS((void)); - -/* Return the history entry at the current position, as determined by - history_offset. If there is no entry there, return a NULL pointer. */ -extern HIST_ENTRY *current_history PARAMS((void)); - -/* Return the history entry which is logically at OFFSET in the history - array. OFFSET is relative to history_base. */ -extern HIST_ENTRY *history_get PARAMS((int)); - -/* Return the timestamp associated with the HIST_ENTRY * passed as an - argument */ -extern time_t history_get_time PARAMS((HIST_ENTRY *)); - -/* Return the number of bytes that the primary history entries are using. - This just adds up the lengths of the_history->lines. */ -extern int history_total_bytes PARAMS((void)); - -/* Moving around the history list. */ - -/* Set the position in the history list to POS. */ -extern int history_set_pos PARAMS((int)); - -/* Back up history_offset to the previous history entry, and return - a pointer to that entry. If there is no previous entry, return - a NULL pointer. */ -extern HIST_ENTRY *previous_history PARAMS((void)); - -/* Move history_offset forward to the next item in the input_history, - and return the a pointer to that entry. If there is no next entry, - return a NULL pointer. */ -extern HIST_ENTRY *next_history PARAMS((void)); - -/* Searching the history list. */ - -/* Search the history for STRING, starting at history_offset. - If DIRECTION < 0, then the search is through previous entries, - else through subsequent. If the string is found, then - current_history () is the history entry, and the value of this function - is the offset in the line of that history entry that the string was - found in. Otherwise, nothing is changed, and a -1 is returned. */ -extern int history_search PARAMS((const char *, int)); - -/* Search the history for STRING, starting at history_offset. - The search is anchored: matching lines must begin with string. - DIRECTION is as in history_search(). */ -extern int history_search_prefix PARAMS((const char *, int)); - -/* Search for STRING in the history list, starting at POS, an - absolute index into the list. DIR, if negative, says to search - backwards from POS, else forwards. - Returns the absolute index of the history element where STRING - was found, or -1 otherwise. */ -extern int history_search_pos PARAMS((const char *, int, int)); - -/* Managing the history file. */ - -/* Add the contents of FILENAME to the history list, a line at a time. - If FILENAME is NULL, then read from ~/.history. Returns 0 if - successful, or errno if not. */ -extern int read_history PARAMS((const char *)); - -/* Read a range of lines from FILENAME, adding them to the history list. - Start reading at the FROM'th line and end at the TO'th. If FROM - is zero, start at the beginning. If TO is less than FROM, read - until the end of the file. If FILENAME is NULL, then read from - ~/.history. Returns 0 if successful, or errno if not. */ -extern int read_history_range PARAMS((const char *, int, int)); - -/* Write the current history to FILENAME. If FILENAME is NULL, - then write the history list to ~/.history. Values returned - are as in read_history (). */ -extern int write_history PARAMS((const char *)); - -/* Append NELEMENT entries to FILENAME. The entries appended are from - the end of the list minus NELEMENTs up to the end of the list. */ -extern int append_history PARAMS((int, const char *)); - -/* Truncate the history file, leaving only the last NLINES lines. */ -extern int history_truncate_file PARAMS((const char *, int)); - -/* History expansion. */ - -/* Expand the string STRING, placing the result into OUTPUT, a pointer - to a string. Returns: - - 0) If no expansions took place (or, if the only change in - the text was the de-slashifying of the history expansion - character) - 1) If expansions did take place - -1) If there was an error in expansion. - 2) If the returned line should just be printed. - - If an error occurred in expansion, then OUTPUT contains a descriptive - error message. */ -extern int history_expand PARAMS((char *, char **)); - -/* Extract a string segment consisting of the FIRST through LAST - arguments present in STRING. Arguments are broken up as in - the shell. */ -extern char *history_arg_extract PARAMS((int, int, const char *)); - -/* Return the text of the history event beginning at the current - offset into STRING. Pass STRING with *INDEX equal to the - history_expansion_char that begins this specification. - DELIMITING_QUOTE is a character that is allowed to end the string - specification for what to search for in addition to the normal - characters `:', ` ', `\t', `\n', and sometimes `?'. */ -extern char *get_history_event PARAMS((const char *, int *, int)); - -/* Return an array of tokens, much as the shell might. The tokens are - parsed out of STRING. */ -extern char **history_tokenize PARAMS((const char *)); - -/* Exported history variables. */ -extern int history_base; -extern int history_length; -extern int history_max_entries; -extern int history_offset; - -extern int history_lines_read_from_file; -extern int history_lines_written_to_file; - -extern char history_expansion_char; -extern char history_subst_char; -extern char *history_word_delimiters; -extern char history_comment_char; -extern char *history_no_expand_chars; -extern char *history_search_delimiter_chars; - -extern int history_quotes_inhibit_expansion; -extern int history_quoting_state; - -extern int history_write_timestamps; - -/* These two are undocumented; the second is reserved for future use */ -extern int history_multiline_entries; -extern int history_file_version; - -/* Backwards compatibility */ -extern int max_input_history; - -/* If set, this function is called to decide whether or not a particular - history expansion should be treated as a special case for the calling - application and not expanded. */ -extern rl_linebuf_func_t *history_inhibit_expansion_function; - -#ifdef __cplusplus -} -#endif - -#endif /* !_HISTORY_H_ */ diff --git a/readline/histsearch.c b/readline/histsearch.c deleted file mode 100644 index 7a426c9678..0000000000 --- a/readline/histsearch.c +++ /dev/null @@ -1,287 +0,0 @@ -/* histsearch.c -- searching the history list. */ - -/* Copyright (C) 1989, 1992-2009,2017 Free Software Foundation, Inc. - - This file contains the GNU History Library (History), a set of - routines for managing the text of previously typed lines. - - History is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - History is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with History. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_UNISTD_H) -# ifdef _MINIX -# include -# endif -# include -#endif - -#if defined (HAVE_FNMATCH) -# include -#endif - -#include "history.h" -#include "histlib.h" -#include "xmalloc.h" - -/* The list of alternate characters that can delimit a history search - string. */ -char *history_search_delimiter_chars = (char *)NULL; - -static int history_search_internal PARAMS((const char *, int, int)); - -/* Search the history for STRING, starting at history_offset. - If DIRECTION < 0, then the search is through previous entries, else - through subsequent. If ANCHORED is non-zero, the string must - appear at the beginning of a history line, otherwise, the string - may appear anywhere in the line. If the string is found, then - current_history () is the history entry, and the value of this - function is the offset in the line of that history entry that the - string was found in. Otherwise, nothing is changed, and a -1 is - returned. */ - -static int -history_search_internal (const char *string, int direction, int flags) -{ - register int i, reverse; - register char *line; - register int line_index; - int string_len, anchored, patsearch; - HIST_ENTRY **the_history; /* local */ - - i = history_offset; - reverse = (direction < 0); - anchored = (flags & ANCHORED_SEARCH); -#if defined (HAVE_FNMATCH) - patsearch = (flags & PATTERN_SEARCH); -#else - patsearch = 0; -#endif - - /* Take care of trivial cases first. */ - if (string == 0 || *string == '\0') - return (-1); - - if (!history_length || ((i >= history_length) && !reverse)) - return (-1); - - if (reverse && (i >= history_length)) - i = history_length - 1; - -#define NEXT_LINE() do { if (reverse) i--; else i++; } while (0) - - the_history = history_list (); - string_len = strlen (string); - while (1) - { - /* Search each line in the history list for STRING. */ - - /* At limit for direction? */ - if ((reverse && i < 0) || (!reverse && i == history_length)) - return (-1); - - line = the_history[i]->line; - line_index = strlen (line); - - /* If STRING is longer than line, no match. */ - if (patsearch == 0 && (string_len > line_index)) - { - NEXT_LINE (); - continue; - } - - /* Handle anchored searches first. */ - if (anchored == ANCHORED_SEARCH) - { -#if defined (HAVE_FNMATCH) - if (patsearch) - { - if (fnmatch (string, line, 0) == 0) - { - history_offset = i; - return (0); - } - } - else -#endif - if (STREQN (string, line, string_len)) - { - history_offset = i; - return (0); - } - - NEXT_LINE (); - continue; - } - - /* Do substring search. */ - if (reverse) - { - line_index -= (patsearch == 0) ? string_len : 1; - - while (line_index >= 0) - { -#if defined (HAVE_FNMATCH) - if (patsearch) - { - if (fnmatch (string, line + line_index, 0) == 0) - { - history_offset = i; - return (line_index); - } - } - else -#endif - if (STREQN (string, line + line_index, string_len)) - { - history_offset = i; - return (line_index); - } - line_index--; - } - } - else - { - register int limit; - - limit = line_index - string_len + 1; - line_index = 0; - - while (line_index < limit) - { -#if defined (HAVE_FNMATCH) - if (patsearch) - { - if (fnmatch (string, line + line_index, 0) == 0) - { - history_offset = i; - return (line_index); - } - } - else -#endif - if (STREQN (string, line + line_index, string_len)) - { - history_offset = i; - return (line_index); - } - line_index++; - } - } - NEXT_LINE (); - } -} - -int -_hs_history_patsearch (const char *string, int direction, int flags) -{ - char *pat; - size_t len, start; - int ret, unescaped_backslash; - -#if defined (HAVE_FNMATCH) - /* Assume that the string passed does not have a leading `^' and any - anchored search request is captured in FLAGS */ - len = strlen (string); - ret = len - 1; - /* fnmatch is required to reject a pattern that ends with an unescaped - backslash */ - if (unescaped_backslash = (string[ret] == '\\')) - { - while (ret > 0 && string[--ret] == '\\') - unescaped_backslash = 1 - unescaped_backslash; - } - if (unescaped_backslash) - return -1; - pat = (char *)xmalloc (len + 3); - /* If the search string is not anchored, we'll be calling fnmatch (assuming - we have it). Prefix a `*' to the front of the search string so we search - anywhere in the line. */ - if ((flags & ANCHORED_SEARCH) == 0 && string[0] != '*') - { - pat[0] = '*'; - start = 1; - len++; - } - else - { - start = 0; - } - - /* Attempt to reduce the number of searches by tacking a `*' onto the end - of a pattern that doesn't have one. Assume a pattern that ends in a - backslash contains an even number of trailing backslashes; we check - above */ - strcpy (pat + start, string); - if (pat[len - 1] != '*') - { - pat[len] = '*'; /* XXX */ - pat[len+1] = '\0'; - } -#else - pat = string; -#endif - - ret = history_search_internal (pat, direction, flags|PATTERN_SEARCH); - - if (pat != string) - free (pat); - return ret; -} - -/* Do a non-anchored search for STRING through the history in DIRECTION. */ -int -history_search (const char *string, int direction) -{ - return (history_search_internal (string, direction, NON_ANCHORED_SEARCH)); -} - -/* Do an anchored search for string through the history in DIRECTION. */ -int -history_search_prefix (const char *string, int direction) -{ - return (history_search_internal (string, direction, ANCHORED_SEARCH)); -} - -/* Search for STRING in the history list. DIR is < 0 for searching - backwards. POS is an absolute index into the history list at - which point to begin searching. */ -int -history_search_pos (const char *string, int dir, int pos) -{ - int ret, old; - - old = where_history (); - history_set_pos (pos); - if (history_search (string, dir) == -1) - { - history_set_pos (old); - return (-1); - } - ret = where_history (); - history_set_pos (old); - return ret; -} diff --git a/readline/input.c b/readline/input.c deleted file mode 100644 index 95ace842ba..0000000000 --- a/readline/input.c +++ /dev/null @@ -1,694 +0,0 @@ -/* input.c -- character input functions for readline. */ - -/* Copyright (C) 1994-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (__TANDEM) -# include -#endif - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#if defined (HAVE_SYS_FILE_H) -# include -#endif /* HAVE_SYS_FILE_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -#include "posixselect.h" - -#if defined (FIONREAD_IN_SYS_IOCTL) -# include -#endif - -#include -#include - -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -/* Some standard library routines. */ -#include "readline.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -/* What kind of non-blocking I/O do we have? */ -#if !defined (O_NDELAY) && defined (O_NONBLOCK) -# define O_NDELAY O_NONBLOCK /* Posix style */ -#endif - -#if defined (HAVE_PSELECT) -extern sigset_t _rl_orig_sigset; -#endif - -/* Non-null means it is a pointer to a function to run while waiting for - character input. */ -rl_hook_func_t *rl_event_hook = (rl_hook_func_t *)NULL; - -/* A function to call if a read(2) is interrupted by a signal. */ -rl_hook_func_t *rl_signal_event_hook = (rl_hook_func_t *)NULL; - -/* A function to replace _rl_input_available for applications using the - callback interface. */ -rl_hook_func_t *rl_input_available_hook = (rl_hook_func_t *)NULL; - -rl_getc_func_t *rl_getc_function = rl_getc; - -static int _keyboard_input_timeout = 100000; /* 0.1 seconds; it's in usec */ - -static int ibuffer_space PARAMS((void)); -static int rl_get_char PARAMS((int *)); -static int rl_gather_tyi PARAMS((void)); - -#if defined (_WIN32) && !defined (__CYGWIN__) - -/* 'isatty' in the Windows runtime returns non-zero for every - character device, including the null device. Repair that. */ -#include -#include -#define WIN32_LEAN_AND_MEAN 1 -#include - -int w32_isatty (int fd) -{ - if (_isatty(fd)) - { - HANDLE h; - DWORD ignored; - - if ((h = (HANDLE) _get_osfhandle (fd)) == INVALID_HANDLE_VALUE) - { - errno = EBADF; - return 0; - } - if (GetConsoleMode (h, &ignored) != 0) - return 1; - } - errno = ENOTTY; - return 0; -} - -#define isatty(x) w32_isatty(x) -#endif - -/* **************************************************************** */ -/* */ -/* Character Input Buffering */ -/* */ -/* **************************************************************** */ - -static int pop_index, push_index; -static unsigned char ibuffer[512]; -static int ibuffer_len = sizeof (ibuffer) - 1; - -#define any_typein (push_index != pop_index) - -int -_rl_any_typein (void) -{ - return any_typein; -} - -int -_rl_pushed_input_available (void) -{ - return (push_index != pop_index); -} - -/* Return the amount of space available in the buffer for stuffing - characters. */ -static int -ibuffer_space (void) -{ - if (pop_index > push_index) - return (pop_index - push_index - 1); - else - return (ibuffer_len - (push_index - pop_index)); -} - -/* Get a key from the buffer of characters to be read. - Return the key in KEY. - Result is non-zero if there was a key, or 0 if there wasn't. */ -static int -rl_get_char (int *key) -{ - if (push_index == pop_index) - return (0); - - *key = ibuffer[pop_index++]; -#if 0 - if (pop_index >= ibuffer_len) -#else - if (pop_index > ibuffer_len) -#endif - pop_index = 0; - - return (1); -} - -/* Stuff KEY into the *front* of the input buffer. - Returns non-zero if successful, zero if there is - no space left in the buffer. */ -int -_rl_unget_char (int key) -{ - if (ibuffer_space ()) - { - pop_index--; - if (pop_index < 0) - pop_index = ibuffer_len; - ibuffer[pop_index] = key; - return (1); - } - return (0); -} - -/* If a character is available to be read, then read it and stuff it into - IBUFFER. Otherwise, just return. Returns number of characters read - (0 if none available) and -1 on error (EIO). */ -static int -rl_gather_tyi (void) -{ - int tty; - register int tem, result; - int chars_avail, k; - char input; -#if defined(HAVE_SELECT) - fd_set readfds, exceptfds; - struct timeval timeout; -#endif - - chars_avail = 0; - input = 0; - tty = fileno (rl_instream); - -#if defined (HAVE_SELECT) - FD_ZERO (&readfds); - FD_ZERO (&exceptfds); - FD_SET (tty, &readfds); - FD_SET (tty, &exceptfds); - USEC_TO_TIMEVAL (_keyboard_input_timeout, timeout); - result = select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout); - if (result <= 0) - return 0; /* Nothing to read. */ -#endif - - result = -1; - errno = 0; -#if defined (FIONREAD) - result = ioctl (tty, FIONREAD, &chars_avail); - if (result == -1 && errno == EIO) - return -1; - if (result == -1) - chars_avail = 0; -#endif - -#if defined (O_NDELAY) - if (result == -1) - { - tem = fcntl (tty, F_GETFL, 0); - - fcntl (tty, F_SETFL, (tem | O_NDELAY)); - chars_avail = read (tty, &input, 1); - - fcntl (tty, F_SETFL, tem); - if (chars_avail == -1 && errno == EAGAIN) - return 0; - if (chars_avail == -1 && errno == EIO) - return -1; - if (chars_avail == 0) /* EOF */ - { - rl_stuff_char (EOF); - return (0); - } - } -#endif /* O_NDELAY */ - -#if defined (__MINGW32__) - /* Use getch/_kbhit to check for available console input, in the same way - that we read it normally. */ - chars_avail = isatty (tty) ? _kbhit () : 0; - result = 0; -#endif - - /* If there's nothing available, don't waste time trying to read - something. */ - if (chars_avail <= 0) - return 0; - - tem = ibuffer_space (); - - if (chars_avail > tem) - chars_avail = tem; - - /* One cannot read all of the available input. I can only read a single - character at a time, or else programs which require input can be - thwarted. If the buffer is larger than one character, I lose. - Damn! */ - if (tem < ibuffer_len) - chars_avail = 0; - - if (result != -1) - { - while (chars_avail--) - { - RL_CHECK_SIGNALS (); - k = (*rl_getc_function) (rl_instream); - if (rl_stuff_char (k) == 0) - break; /* some problem; no more room */ - if (k == NEWLINE || k == RETURN) - break; - } - } - else - { - if (chars_avail) - rl_stuff_char (input); - } - - return 1; -} - -int -rl_set_keyboard_input_timeout (int u) -{ - int o; - - o = _keyboard_input_timeout; - if (u >= 0) - _keyboard_input_timeout = u; - return (o); -} - -/* Is there input available to be read on the readline input file - descriptor? Only works if the system has select(2) or FIONREAD. - Uses the value of _keyboard_input_timeout as the timeout; if another - readline function wants to specify a timeout and not leave it up to - the user, it should use _rl_input_queued(timeout_value_in_microseconds) - instead. */ -int -_rl_input_available (void) -{ -#if defined(HAVE_SELECT) - fd_set readfds, exceptfds; - struct timeval timeout; -#endif -#if !defined (HAVE_SELECT) && defined(FIONREAD) - int chars_avail; -#endif - int tty; - - if (rl_input_available_hook) - return (*rl_input_available_hook) (); - - tty = fileno (rl_instream); - -#if defined (HAVE_SELECT) - FD_ZERO (&readfds); - FD_ZERO (&exceptfds); - FD_SET (tty, &readfds); - FD_SET (tty, &exceptfds); - timeout.tv_sec = 0; - timeout.tv_usec = _keyboard_input_timeout; - return (select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout) > 0); -#else - -#if defined (FIONREAD) - if (ioctl (tty, FIONREAD, &chars_avail) == 0) - return (chars_avail); -#endif - -#endif - -#if defined (__MINGW32__) - if (isatty (tty)) - return (_kbhit ()); -#endif - - return 0; -} - -int -_rl_input_queued (int t) -{ - int old_timeout, r; - - old_timeout = rl_set_keyboard_input_timeout (t); - r = _rl_input_available (); - rl_set_keyboard_input_timeout (old_timeout); - return r; -} - -void -_rl_insert_typein (int c) -{ - int key, t, i; - char *string; - - i = key = 0; - string = (char *)xmalloc (ibuffer_len + 1); - string[i++] = (char) c; - - while ((t = rl_get_char (&key)) && - _rl_keymap[key].type == ISFUNC && - _rl_keymap[key].function == rl_insert) - string[i++] = key; - - if (t) - _rl_unget_char (key); - - string[i] = '\0'; - rl_insert_text (string); - xfree (string); -} - -/* Add KEY to the buffer of characters to be read. Returns 1 if the - character was stuffed correctly; 0 otherwise. */ -int -rl_stuff_char (int key) -{ - if (ibuffer_space () == 0) - return 0; - - if (key == EOF) - { - key = NEWLINE; - rl_pending_input = EOF; - RL_SETSTATE (RL_STATE_INPUTPENDING); - } - ibuffer[push_index++] = key; -#if 0 - if (push_index >= ibuffer_len) -#else - if (push_index > ibuffer_len) -#endif - push_index = 0; - - return 1; -} - -/* Make C be the next command to be executed. */ -int -rl_execute_next (int c) -{ - rl_pending_input = c; - RL_SETSTATE (RL_STATE_INPUTPENDING); - return 0; -} - -/* Clear any pending input pushed with rl_execute_next() */ -int -rl_clear_pending_input (void) -{ - rl_pending_input = 0; - RL_UNSETSTATE (RL_STATE_INPUTPENDING); - return 0; -} - -/* **************************************************************** */ -/* */ -/* Character Input */ -/* */ -/* **************************************************************** */ - -/* Read a key, including pending input. */ -int -rl_read_key (void) -{ - int c, r; - - if (rl_pending_input) - { - c = rl_pending_input; /* XXX - cast to unsigned char if > 0? */ - rl_clear_pending_input (); - } - else - { - /* If input is coming from a macro, then use that. */ - if (c = _rl_next_macro_key ()) - return ((unsigned char)c); - - /* If the user has an event function, then call it periodically. */ - if (rl_event_hook) - { - while (rl_event_hook) - { - if (rl_get_char (&c) != 0) - break; - - if ((r = rl_gather_tyi ()) < 0) /* XXX - EIO */ - { - rl_done = 1; - return (errno == EIO ? (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF) : '\n'); - } - else if (r > 0) /* read something */ - continue; - - RL_CHECK_SIGNALS (); - if (rl_done) /* XXX - experimental */ - return ('\n'); - (*rl_event_hook) (); - } - } - else - { - if (rl_get_char (&c) == 0) - c = (*rl_getc_function) (rl_instream); -/* fprintf(stderr, "rl_read_key: calling RL_CHECK_SIGNALS: _rl_caught_signal = %d", _rl_caught_signal); */ - RL_CHECK_SIGNALS (); - } - } - - return (c); -} - -int -rl_getc (FILE *stream) -{ - int result; - unsigned char c; -#if defined (HAVE_PSELECT) - sigset_t empty_set; - fd_set readfds; -#endif - - while (1) - { - RL_CHECK_SIGNALS (); - - /* We know at this point that _rl_caught_signal == 0 */ - -#if defined (__MINGW32__) - if (isatty (fileno (stream))) - return (_getch ()); /* "There is no error return." */ -#endif - result = 0; -#if defined (HAVE_PSELECT) - FD_ZERO (&readfds); - FD_SET (fileno (stream), &readfds); -# if defined (HANDLE_SIGNALS) - result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &_rl_orig_sigset); -# else - sigemptyset (&empty_set); - sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &empty_set); - result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &empty_set); -# endif /* HANDLE_SIGNALS */ -#endif - if (result >= 0) - result = read (fileno (stream), &c, sizeof (unsigned char)); - - if (result == sizeof (unsigned char)) - return (c); - - /* If zero characters are returned, then the file that we are - reading from is empty! Return EOF in that case. */ - if (result == 0) - return (EOF); - -#if defined (__BEOS__) - if (errno == EINTR) - continue; -#endif - -#if defined (EWOULDBLOCK) -# define X_EWOULDBLOCK EWOULDBLOCK -#else -# define X_EWOULDBLOCK -99 -#endif - -#if defined (EAGAIN) -# define X_EAGAIN EAGAIN -#else -# define X_EAGAIN -99 -#endif - - if (errno == X_EWOULDBLOCK || errno == X_EAGAIN) - { - if (sh_unset_nodelay_mode (fileno (stream)) < 0) - return (EOF); - continue; - } - -#undef X_EWOULDBLOCK -#undef X_EAGAIN - -/* fprintf(stderr, "rl_getc: result = %d errno = %d\n", result, errno); */ - -handle_error: - /* If the error that we received was EINTR, then try again, - this is simply an interrupted system call to read (). We allow - the read to be interrupted if we caught SIGHUP, SIGTERM, or any - of the other signals readline treats specially. If the - application sets an event hook, call it for other signals. - Otherwise (not EINTR), some error occurred, also signifying EOF. */ - if (errno != EINTR) - return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF); - /* fatal signals of interest */ -#if defined (SIGHUP) - else if (_rl_caught_signal == SIGHUP || _rl_caught_signal == SIGTERM) -#else - else if (_rl_caught_signal == SIGTERM) -#endif - return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF); - /* keyboard-generated signals of interest */ -#if defined (SIGQUIT) - else if (_rl_caught_signal == SIGINT || _rl_caught_signal == SIGQUIT) -#else - else if (_rl_caught_signal == SIGINT) -#endif - RL_CHECK_SIGNALS (); - /* non-keyboard-generated signals of interest */ -#if defined (SIGWINCH) - else if (_rl_caught_signal == SIGWINCH) - RL_CHECK_SIGNALS (); -#endif /* SIGWINCH */ -#if defined (SIGALRM) - else if (_rl_caught_signal == SIGALRM -# if defined (SIGVTALRM) - || _rl_caught_signal == SIGVTALRM -# endif - ) - RL_CHECK_SIGNALS (); -#endif /* SIGALRM */ - - if (rl_signal_event_hook) - (*rl_signal_event_hook) (); - } -} - -#if defined (HANDLE_MULTIBYTE) -/* read multibyte char */ -int -_rl_read_mbchar (char *mbchar, int size) -{ - int mb_len, c; - size_t mbchar_bytes_length; - wchar_t wc; - mbstate_t ps, ps_back; - - memset(&ps, 0, sizeof (mbstate_t)); - memset(&ps_back, 0, sizeof (mbstate_t)); - - mb_len = 0; - while (mb_len < size) - { - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (c < 0) - break; - - mbchar[mb_len++] = c; - - mbchar_bytes_length = mbrtowc (&wc, mbchar, mb_len, &ps); - if (mbchar_bytes_length == (size_t)(-1)) - break; /* invalid byte sequence for the current locale */ - else if (mbchar_bytes_length == (size_t)(-2)) - { - /* shorted bytes */ - ps = ps_back; - continue; - } - else if (mbchar_bytes_length == 0) - { - mbchar[0] = '\0'; /* null wide character */ - mb_len = 1; - break; - } - else if (mbchar_bytes_length > (size_t)(0)) - break; - } - - return mb_len; -} - -/* Read a multibyte-character string whose first character is FIRST into - the buffer MB of length MLEN. Returns the last character read, which - may be FIRST. Used by the search functions, among others. Very similar - to _rl_read_mbchar. */ -int -_rl_read_mbstring (int first, char *mb, int mlen) -{ - int i, c, n; - mbstate_t ps; - - c = first; - memset (mb, 0, mlen); - for (i = 0; c >= 0 && i < mlen; i++) - { - mb[i] = (char)c; - memset (&ps, 0, sizeof (mbstate_t)); - n = _rl_get_char_len (mb, &ps); - if (n == -2) - { - /* Read more for multibyte character */ - RL_SETSTATE (RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE (RL_STATE_MOREINPUT); - } - else - break; - } - return c; -} -#endif /* HANDLE_MULTIBYTE */ diff --git a/readline/isearch.c b/readline/isearch.c deleted file mode 100644 index d6c5904177..0000000000 --- a/readline/isearch.c +++ /dev/null @@ -1,829 +0,0 @@ -/* isearch.c - incremental searching */ - -/* **************************************************************** */ -/* */ -/* I-Search and Searching */ -/* */ -/* **************************************************************** */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif - -#include "rldefs.h" -#include "rlmbutil.h" - -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -/* Variables exported to other files in the readline library. */ -char *_rl_isearch_terminators = (char *)NULL; - -_rl_search_cxt *_rl_iscxt = 0; - -/* Variables imported from other files in the readline library. */ -extern HIST_ENTRY *_rl_saved_line_for_history; - -static int rl_search_history PARAMS((int, int)); - -static _rl_search_cxt *_rl_isearch_init PARAMS((int)); -static void _rl_isearch_fini PARAMS((_rl_search_cxt *)); - -/* Last line found by the current incremental search, so we don't `find' - identical lines many times in a row. Now part of isearch context. */ -/* static char *prev_line_found; */ - -/* Last search string and its length. */ -static char *last_isearch_string; -static int last_isearch_string_len; - -static char * const default_isearch_terminators = "\033\012"; - -_rl_search_cxt * -_rl_scxt_alloc (int type, int flags) -{ - _rl_search_cxt *cxt; - - cxt = (_rl_search_cxt *)xmalloc (sizeof (_rl_search_cxt)); - - cxt->type = type; - cxt->sflags = flags; - - cxt->search_string = 0; - cxt->search_string_size = cxt->search_string_index = 0; - - cxt->lines = 0; - cxt->allocated_line = 0; - cxt->hlen = cxt->hindex = 0; - - cxt->save_point = rl_point; - cxt->save_mark = rl_mark; - cxt->save_line = where_history (); - cxt->last_found_line = cxt->save_line; - cxt->prev_line_found = 0; - - cxt->save_undo_list = 0; - - cxt->keymap = _rl_keymap; - cxt->okeymap = _rl_keymap; - - cxt->history_pos = 0; - cxt->direction = 0; - - cxt->prevc = cxt->lastc = 0; - - cxt->sline = 0; - cxt->sline_len = cxt->sline_index = 0; - - cxt->search_terminators = 0; - - return cxt; -} - -void -_rl_scxt_dispose (_rl_search_cxt *cxt, int flags) -{ - FREE (cxt->search_string); - FREE (cxt->allocated_line); - FREE (cxt->lines); - - xfree (cxt); -} - -/* Search backwards through the history looking for a string which is typed - interactively. Start with the current line. */ -int -rl_reverse_search_history (int sign, int key) -{ - return (rl_search_history (-sign, key)); -} - -/* Search forwards through the history looking for a string which is typed - interactively. Start with the current line. */ -int -rl_forward_search_history (int sign, int key) -{ - return (rl_search_history (sign, key)); -} - -/* Display the current state of the search in the echo-area. - SEARCH_STRING contains the string that is being searched for, - DIRECTION is zero for forward, or non-zero for reverse, - WHERE is the history list number of the current line. If it is - -1, then this line is the starting one. */ -static void -rl_display_search (char *search_string, int flags, int where) -{ - char *message; - int msglen, searchlen; - - searchlen = (search_string && *search_string) ? strlen (search_string) : 0; - - message = (char *)xmalloc (searchlen + 64); - msglen = 0; - -#if defined (NOTDEF) - if (where != -1) - { - sprintf (message, "[%d]", where + history_base); - msglen = strlen (message); - } -#endif /* NOTDEF */ - - message[msglen++] = '('; - - if (flags & SF_FAILED) - { - strcpy (message + msglen, "failed "); - msglen += 7; - } - - if (flags & SF_REVERSE) - { - strcpy (message + msglen, "reverse-"); - msglen += 8; - } - - strcpy (message + msglen, "i-search)`"); - msglen += 10; - - if (search_string) - { - strcpy (message + msglen, search_string); - msglen += searchlen; - } - - strcpy (message + msglen, "': "); - - rl_message ("%s", message); - xfree (message); - (*rl_redisplay_function) (); -} - -static _rl_search_cxt * -_rl_isearch_init (int direction) -{ - _rl_search_cxt *cxt; - register int i; - HIST_ENTRY **hlist; - - cxt = _rl_scxt_alloc (RL_SEARCH_ISEARCH, 0); - if (direction < 0) - cxt->sflags |= SF_REVERSE; - - cxt->search_terminators = _rl_isearch_terminators ? _rl_isearch_terminators - : default_isearch_terminators; - - /* Create an array of pointers to the lines that we want to search. */ - hlist = history_list (); - rl_maybe_replace_line (); - i = 0; - if (hlist) - for (i = 0; hlist[i]; i++); - - /* Allocate space for this many lines, +1 for the current input line, - and remember those lines. */ - cxt->lines = (char **)xmalloc ((1 + (cxt->hlen = i)) * sizeof (char *)); - for (i = 0; i < cxt->hlen; i++) - cxt->lines[i] = hlist[i]->line; - - if (_rl_saved_line_for_history) - cxt->lines[i] = _rl_saved_line_for_history->line; - else - { - /* Keep track of this so we can free it. */ - cxt->allocated_line = (char *)xmalloc (1 + strlen (rl_line_buffer)); - strcpy (cxt->allocated_line, &rl_line_buffer[0]); - cxt->lines[i] = cxt->allocated_line; - } - - cxt->hlen++; - - /* The line where we start the search. */ - cxt->history_pos = cxt->save_line; - - rl_save_prompt (); - - /* Initialize search parameters. */ - cxt->search_string = (char *)xmalloc (cxt->search_string_size = 128); - cxt->search_string[cxt->search_string_index = 0] = '\0'; - - /* Normalize DIRECTION into 1 or -1. */ - cxt->direction = (direction >= 0) ? 1 : -1; - - cxt->sline = rl_line_buffer; - cxt->sline_len = strlen (cxt->sline); - cxt->sline_index = rl_point; - - _rl_iscxt = cxt; /* save globally */ - - return cxt; -} - -static void -_rl_isearch_fini (_rl_search_cxt *cxt) -{ - /* First put back the original state. */ - rl_replace_line (cxt->lines[cxt->save_line], 0); - - rl_restore_prompt (); - - /* Save the search string for possible later use. */ - FREE (last_isearch_string); - last_isearch_string = cxt->search_string; - last_isearch_string_len = cxt->search_string_index; - cxt->search_string = 0; - - if (cxt->last_found_line < cxt->save_line) - rl_get_previous_history (cxt->save_line - cxt->last_found_line, 0); - else - rl_get_next_history (cxt->last_found_line - cxt->save_line, 0); - - /* If the string was not found, put point at the end of the last matching - line. If last_found_line == orig_line, we didn't find any matching - history lines at all, so put point back in its original position. */ - if (cxt->sline_index < 0) - { - if (cxt->last_found_line == cxt->save_line) - cxt->sline_index = cxt->save_point; - else - cxt->sline_index = strlen (rl_line_buffer); - rl_mark = cxt->save_mark; - } - - rl_point = cxt->sline_index; - /* Don't worry about where to put the mark here; rl_get_previous_history - and rl_get_next_history take care of it. */ - _rl_fix_point (0); - - rl_clear_message (); -} - -int -_rl_search_getchar (_rl_search_cxt *cxt) -{ - int c; - - /* Read a key and decide how to proceed. */ - RL_SETSTATE(RL_STATE_MOREINPUT); - c = cxt->lastc = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - -#if defined (HANDLE_MULTIBYTE) - /* This ends up with C (and LASTC) being set to the last byte of the - multibyte character. In most cases c == lastc == mb[0] */ - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - c = cxt->lastc = _rl_read_mbstring (cxt->lastc, cxt->mb, MB_LEN_MAX); -#endif - - RL_CHECK_SIGNALS (); - return c; -} - -#define ENDSRCH_CHAR(c) \ - ((CTRL_CHAR (c) || META_CHAR (c) || (c) == RUBOUT) && ((c) != CTRL ('G'))) - -/* Process just-read character C according to isearch context CXT. Return - -1 if the caller should just free the context and return, 0 if we should - break out of the loop, and 1 if we should continue to read characters. */ -int -_rl_isearch_dispatch (_rl_search_cxt *cxt, int c) -{ - int n, wstart, wlen, limit, cval, incr; - char *paste; - size_t pastelen; - int j; - rl_command_func_t *f; - - f = (rl_command_func_t *)NULL; - - if (c < 0) - { - cxt->sflags |= SF_FAILED; - cxt->history_pos = cxt->last_found_line; - return -1; - } - - /* If we are moving into a new keymap, modify cxt->keymap and go on. - This can be a problem if c == ESC and we want to terminate the - incremental search, so we check */ - if (c >= 0 && cxt->keymap[c].type == ISKMAP && strchr (cxt->search_terminators, cxt->lastc) == 0) - { - /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued - takes microseconds, so multiply by 1000. If we don't get any - additional input and this keymap shadows another function, process - that key as if it was all we read. */ - if (_rl_keyseq_timeout > 0 && - RL_ISSTATE (RL_STATE_CALLBACK) == 0 && - RL_ISSTATE (RL_STATE_INPUTPENDING) == 0 && - _rl_pushed_input_available () == 0 && - ((Keymap)(cxt->keymap[c].function))[ANYOTHERKEY].function && - _rl_input_queued (_rl_keyseq_timeout*1000) == 0) - goto add_character; - - cxt->okeymap = cxt->keymap; - cxt->keymap = FUNCTION_TO_KEYMAP (cxt->keymap, c); - cxt->sflags |= SF_CHGKMAP; - /* XXX - we should probably save this sequence, so we can do - something useful if this doesn't end up mapping to a command we - interpret here. Right now we just save the most recent character - that caused the index into a new keymap. */ - cxt->prevc = c; -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - if (cxt->mb[1] == 0) - { - cxt->pmb[0] = c; /* XXX should be == cxt->mb[0] */ - cxt->pmb[1] = '\0'; - } - else - memcpy (cxt->pmb, cxt->mb, sizeof (cxt->pmb)); - } -#endif - return 1; - } - -add_character: - - /* Translate the keys we do something with to opcodes. */ - if (c >= 0 && cxt->keymap[c].type == ISFUNC) - { - f = cxt->keymap[c].function; - - if (f == rl_reverse_search_history) - cxt->lastc = (cxt->sflags & SF_REVERSE) ? -1 : -2; - else if (f == rl_forward_search_history) - cxt->lastc = (cxt->sflags & SF_REVERSE) ? -2 : -1; - else if (f == rl_rubout) - cxt->lastc = -3; - else if (c == CTRL ('G') || f == rl_abort) - cxt->lastc = -4; - else if (c == CTRL ('W') || f == rl_unix_word_rubout) /* XXX */ - cxt->lastc = -5; - else if (c == CTRL ('Y') || f == rl_yank) /* XXX */ - cxt->lastc = -6; - else if (f == rl_bracketed_paste_begin) - cxt->lastc = -7; - } - - /* If we changed the keymap earlier while translating a key sequence into - a command, restore it now that we've succeeded. */ - if (cxt->sflags & SF_CHGKMAP) - { - cxt->keymap = cxt->okeymap; - cxt->sflags &= ~SF_CHGKMAP; - /* If we indexed into a new keymap, but didn't map to a command that - affects the search (lastc > 0), and the character that mapped to a - new keymap would have ended the search (ENDSRCH_CHAR(cxt->prevc)), - handle that now as if the previous char would have ended the search - and we would have read the current character. */ - /* XXX - should we check cxt->mb? */ - if (cxt->lastc > 0 && ENDSRCH_CHAR (cxt->prevc)) - { - rl_stuff_char (cxt->lastc); - rl_execute_next (cxt->prevc); - /* XXX - do we insert everything in cxt->pmb? */ - return (0); - } - /* Otherwise, if the current character is mapped to self-insert or - nothing (i.e., not an editing command), and the previous character - was a keymap index, then we need to insert both the previous - character and the current character into the search string. */ - else if (cxt->lastc > 0 && cxt->prevc > 0 && - cxt->keymap[cxt->prevc].type == ISKMAP && - (f == 0 || f == rl_insert)) - { - /* Make lastc be the next character read */ - /* XXX - do we insert everything in cxt->mb? */ - rl_execute_next (cxt->lastc); - /* Dispatch on the previous character (insert into search string) */ - cxt->lastc = cxt->prevc; -#if defined (HANDLE_MULTIBYTE) - /* Have to overwrite cxt->mb here because dispatch uses it below */ - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - if (cxt->pmb[1] == 0) - { - cxt->mb[0] = cxt->lastc; /* == cxt->prevc */ - cxt->mb[1] = '\0'; - } - else - memcpy (cxt->mb, cxt->pmb, sizeof (cxt->mb)); - } -#endif - cxt->prevc = 0; - } - else if (cxt->lastc > 0 && cxt->prevc > 0 && f && f != rl_insert) - { - rl_stuff_char (cxt->lastc); - rl_execute_next (cxt->prevc); - /* XXX - do we insert everything in cxt->pmb? */ - return (0); - } - } - - /* The characters in isearch_terminators (set from the user-settable - variable isearch-terminators) are used to terminate the search but - not subsequently execute the character as a command. The default - value is "\033\012" (ESC and C-J). */ - if (cxt->lastc > 0 && strchr (cxt->search_terminators, cxt->lastc)) - { - /* ESC still terminates the search, but if there is pending - input or if input arrives within 0.1 seconds (on systems - with select(2)) it is used as a prefix character - with rl_execute_next. WATCH OUT FOR THIS! This is intended - to allow the arrow keys to be used like ^F and ^B are used - to terminate the search and execute the movement command. - XXX - since _rl_input_available depends on the application- - settable keyboard timeout value, this could alternatively - use _rl_input_queued(100000) */ - if (cxt->lastc == ESC && (_rl_pushed_input_available () || _rl_input_available ())) - rl_execute_next (ESC); - return (0); - } - -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - if (cxt->lastc >= 0 && (cxt->mb[0] && cxt->mb[1] == '\0') && ENDSRCH_CHAR (cxt->lastc)) - { - /* This sets rl_pending_input to LASTC; it will be picked up the next - time rl_read_key is called. */ - rl_execute_next (cxt->lastc); - return (0); - } - } - else -#endif - if (cxt->lastc >= 0 && ENDSRCH_CHAR (cxt->lastc)) - { - /* This sets rl_pending_input to LASTC; it will be picked up the next - time rl_read_key is called. */ - rl_execute_next (cxt->lastc); - return (0); - } - - /* Now dispatch on the character. `Opcodes' affect the search string or - state. Other characters are added to the string. */ - switch (cxt->lastc) - { - /* search again */ - case -1: - if (cxt->search_string_index == 0) - { - if (last_isearch_string) - { - cxt->search_string_size = 64 + last_isearch_string_len; - cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); - strcpy (cxt->search_string, last_isearch_string); - cxt->search_string_index = last_isearch_string_len; - rl_display_search (cxt->search_string, cxt->sflags, -1); - break; - } - return (1); - } - else if ((cxt->sflags & SF_REVERSE) && cxt->sline_index >= 0) - cxt->sline_index--; - else if (cxt->sline_index != cxt->sline_len) - cxt->sline_index++; - else - rl_ding (); - break; - - /* switch directions */ - case -2: - cxt->direction = -cxt->direction; - if (cxt->direction < 0) - cxt->sflags |= SF_REVERSE; - else - cxt->sflags &= ~SF_REVERSE; - break; - - /* delete character from search string. */ - case -3: /* C-H, DEL */ - /* This is tricky. To do this right, we need to keep a - stack of search positions for the current search, with - sentinels marking the beginning and end. But this will - do until we have a real isearch-undo. */ - if (cxt->search_string_index == 0) - rl_ding (); - else if (MB_CUR_MAX == 1 || rl_byte_oriented) - cxt->search_string[--cxt->search_string_index] = '\0'; - else - { - wstart = _rl_find_prev_mbchar (cxt->search_string, cxt->search_string_index, MB_FIND_NONZERO); - if (wstart >= 0) - cxt->search_string[cxt->search_string_index = wstart] = '\0'; - else - cxt->search_string[cxt->search_string_index = 0] = '\0'; - } - - if (cxt->search_string_index == 0) - rl_ding (); - - break; - - case -4: /* C-G, abort */ - rl_replace_line (cxt->lines[cxt->save_line], 0); - rl_point = cxt->save_point; - rl_mark = cxt->save_mark; - rl_restore_prompt(); - rl_clear_message (); - - return -1; - - case -5: /* C-W */ - /* skip over portion of line we already matched and yank word */ - wstart = rl_point + cxt->search_string_index; - if (wstart >= rl_end) - { - rl_ding (); - break; - } - - /* if not in a word, move to one. */ - cval = _rl_char_value (rl_line_buffer, wstart); - if (_rl_walphabetic (cval) == 0) - { - rl_ding (); - break; - } - n = MB_NEXTCHAR (rl_line_buffer, wstart, 1, MB_FIND_NONZERO);; - while (n < rl_end) - { - cval = _rl_char_value (rl_line_buffer, n); - if (_rl_walphabetic (cval) == 0) - break; - n = MB_NEXTCHAR (rl_line_buffer, n, 1, MB_FIND_NONZERO);; - } - wlen = n - wstart + 1; - if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size) - { - cxt->search_string_size += wlen + 1; - cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); - } - for (; wstart < n; wstart++) - cxt->search_string[cxt->search_string_index++] = rl_line_buffer[wstart]; - cxt->search_string[cxt->search_string_index] = '\0'; - break; - - case -6: /* C-Y */ - /* skip over portion of line we already matched and yank rest */ - wstart = rl_point + cxt->search_string_index; - if (wstart >= rl_end) - { - rl_ding (); - break; - } - n = rl_end - wstart + 1; - if (cxt->search_string_index + n + 1 >= cxt->search_string_size) - { - cxt->search_string_size += n + 1; - cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); - } - for (n = wstart; n < rl_end; n++) - cxt->search_string[cxt->search_string_index++] = rl_line_buffer[n]; - cxt->search_string[cxt->search_string_index] = '\0'; - break; - - case -7: /* bracketed paste */ - paste = _rl_bracketed_text (&pastelen); - if (paste == 0 || *paste == 0) - { - free (paste); - break; - } - if (cxt->search_string_index + pastelen + 1 >= cxt->search_string_size) - { - cxt->search_string_size += pastelen + 2; - cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); - } - strcpy (cxt->search_string + cxt->search_string_index, paste); - cxt->search_string_index += pastelen; - free (paste); - break; - - /* Add character to search string and continue search. */ - default: -#if defined (HANDLE_MULTIBYTE) - wlen = (cxt->mb[0] == 0 || cxt->mb[1] == 0) ? 1 : RL_STRLEN (cxt->mb); -#else - wlen = 1; -#endif - if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size) - { - cxt->search_string_size += 128; /* 128 much greater than MB_CUR_MAX */ - cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); - } -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - int j; - - if (cxt->mb[0] == 0 || cxt->mb[1] == 0) - cxt->search_string[cxt->search_string_index++] = cxt->mb[0]; - else - for (j = 0; j < wlen; ) - cxt->search_string[cxt->search_string_index++] = cxt->mb[j++]; - } - else -#endif - cxt->search_string[cxt->search_string_index++] = cxt->lastc; /* XXX - was c instead of lastc */ - cxt->search_string[cxt->search_string_index] = '\0'; - break; - } - - for (cxt->sflags &= ~(SF_FOUND|SF_FAILED);; ) - { - if (cxt->search_string_index == 0) - { - cxt->sflags |= SF_FAILED; - break; - } - - limit = cxt->sline_len - cxt->search_string_index + 1; - - /* Search the current line. */ - while ((cxt->sflags & SF_REVERSE) ? (cxt->sline_index >= 0) : (cxt->sline_index < limit)) - { - if (STREQN (cxt->search_string, cxt->sline + cxt->sline_index, cxt->search_string_index)) - { - cxt->sflags |= SF_FOUND; - break; - } - else - cxt->sline_index += cxt->direction; - - if (cxt->sline_index < 0) - { - cxt->sline_index = 0; - break; - } - } - if (cxt->sflags & SF_FOUND) - break; - - /* Move to the next line, but skip new copies of the line - we just found and lines shorter than the string we're - searching for. */ - do - { - /* Move to the next line. */ - cxt->history_pos += cxt->direction; - - /* At limit for direction? */ - if ((cxt->sflags & SF_REVERSE) ? (cxt->history_pos < 0) : (cxt->history_pos == cxt->hlen)) - { - cxt->sflags |= SF_FAILED; - break; - } - - /* We will need these later. */ - cxt->sline = cxt->lines[cxt->history_pos]; - cxt->sline_len = strlen (cxt->sline); - } - while ((cxt->prev_line_found && STREQ (cxt->prev_line_found, cxt->lines[cxt->history_pos])) || - (cxt->search_string_index > cxt->sline_len)); - - if (cxt->sflags & SF_FAILED) - { - /* XXX - reset sline_index if < 0 */ - if (cxt->sline_index < 0) - cxt->sline_index = 0; - break; - } - - /* Now set up the line for searching... */ - cxt->sline_index = (cxt->sflags & SF_REVERSE) ? cxt->sline_len - cxt->search_string_index : 0; - } - - if (cxt->sflags & SF_FAILED) - { - /* We cannot find the search string. Ding the bell. */ - rl_ding (); - cxt->history_pos = cxt->last_found_line; - rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos); - return 1; - } - - /* We have found the search string. Just display it. But don't - actually move there in the history list until the user accepts - the location. */ - if (cxt->sflags & SF_FOUND) - { - cxt->prev_line_found = cxt->lines[cxt->history_pos]; - rl_replace_line (cxt->lines[cxt->history_pos], 0); - rl_point = cxt->sline_index; - cxt->last_found_line = cxt->history_pos; - rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos); - } - - return 1; -} - -int -_rl_isearch_cleanup (_rl_search_cxt *cxt, int r) -{ - if (r >= 0) - _rl_isearch_fini (cxt); - _rl_scxt_dispose (cxt, 0); - _rl_iscxt = 0; - - RL_UNSETSTATE(RL_STATE_ISEARCH); - - return (r != 0); -} - -/* Search through the history looking for an interactively typed string. - This is analogous to i-search. We start the search in the current line. - DIRECTION is which direction to search; >= 0 means forward, < 0 means - backwards. */ -static int -rl_search_history (int direction, int invoking_key) -{ - _rl_search_cxt *cxt; /* local for now, but saved globally */ - int c, r; - - RL_SETSTATE(RL_STATE_ISEARCH); - cxt = _rl_isearch_init (direction); - - rl_display_search (cxt->search_string, cxt->sflags, -1); - - /* If we are using the callback interface, all we do is set up here and - return. The key is that we leave RL_STATE_ISEARCH set. */ - if (RL_ISSTATE (RL_STATE_CALLBACK)) - return (0); - - r = -1; - for (;;) - { - c = _rl_search_getchar (cxt); - /* We might want to handle EOF here (c == 0) */ - r = _rl_isearch_dispatch (cxt, cxt->lastc); - if (r <= 0) - break; - } - - /* The searching is over. The user may have found the string that she - was looking for, or else she may have exited a failing search. If - LINE_INDEX is -1, then that shows that the string searched for was - not found. We use this to determine where to place rl_point. */ - return (_rl_isearch_cleanup (cxt, r)); -} - -#if defined (READLINE_CALLBACKS) -/* Called from the callback functions when we are ready to read a key. The - callback functions know to call this because RL_ISSTATE(RL_STATE_ISEARCH). - If _rl_isearch_dispatch finishes searching, this function is responsible - for turning off RL_STATE_ISEARCH, which it does using _rl_isearch_cleanup. */ -int -_rl_isearch_callback (_rl_search_cxt *cxt) -{ - int c, r; - - c = _rl_search_getchar (cxt); - /* We might want to handle EOF here */ - r = _rl_isearch_dispatch (cxt, cxt->lastc); - - return (r <= 0) ? _rl_isearch_cleanup (cxt, r) : 0; -} -#endif diff --git a/readline/keymaps.c b/readline/keymaps.c deleted file mode 100644 index 4ade30bcd0..0000000000 --- a/readline/keymaps.c +++ /dev/null @@ -1,174 +0,0 @@ -/* keymaps.c -- Functions and keymaps for the GNU Readline library. */ - -/* Copyright (C) 1988,1989-2009,2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include /* for FILE * definition for readline.h */ - -#include "readline.h" -#include "rlconf.h" - -#include "emacs_keymap.c" - -#if defined (VI_MODE) -#include "vi_keymap.c" -#endif - -#include "xmalloc.h" - -/* **************************************************************** */ -/* */ -/* Functions for manipulating Keymaps. */ -/* */ -/* **************************************************************** */ - - -/* Return a new, empty keymap. - Free it with free() when you are done. */ -Keymap -rl_make_bare_keymap (void) -{ - register int i; - Keymap keymap; - - keymap = (Keymap)xmalloc (KEYMAP_SIZE * sizeof (KEYMAP_ENTRY)); - for (i = 0; i < KEYMAP_SIZE; i++) - { - keymap[i].type = ISFUNC; - keymap[i].function = (rl_command_func_t *)NULL; - } - -#if 0 - for (i = 'A'; i < ('Z' + 1); i++) - { - keymap[i].type = ISFUNC; - keymap[i].function = rl_do_lowercase_version; - } -#endif - - return (keymap); -} - -/* A convenience function that returns 1 if there are no keys bound to - functions in KEYMAP */ -int -rl_empty_keymap (Keymap keymap) -{ - int i; - - for (i = 0; i < ANYOTHERKEY; i++) - { - if (keymap[i].type != ISFUNC || keymap[i].function) - return 0; - } - return 1; -} - -/* Return a new keymap which is a copy of MAP. Just copies pointers, does - not copy text of macros or descend into child keymaps. */ -Keymap -rl_copy_keymap (Keymap map) -{ - register int i; - Keymap temp; - - temp = rl_make_bare_keymap (); - for (i = 0; i < KEYMAP_SIZE; i++) - { - temp[i].type = map[i].type; - temp[i].function = map[i].function; - } - return (temp); -} - -/* Return a new keymap with the printing characters bound to rl_insert, - the uppercase Meta characters bound to run their lowercase equivalents, - and the Meta digits bound to produce numeric arguments. */ -Keymap -rl_make_keymap (void) -{ - register int i; - Keymap newmap; - - newmap = rl_make_bare_keymap (); - - /* All ASCII printing characters are self-inserting. */ - for (i = ' '; i < 127; i++) - newmap[i].function = rl_insert; - - newmap[TAB].function = rl_insert; - newmap[RUBOUT].function = rl_rubout; /* RUBOUT == 127 */ - newmap[CTRL('H')].function = rl_rubout; - -#if KEYMAP_SIZE > 128 - /* Printing characters in ISO Latin-1 and some 8-bit character sets. */ - for (i = 128; i < 256; i++) - newmap[i].function = rl_insert; -#endif /* KEYMAP_SIZE > 128 */ - - return (newmap); -} - -/* Free the storage associated with MAP. */ -void -rl_discard_keymap (Keymap map) -{ - int i; - - if (map == 0) - return; - - for (i = 0; i < KEYMAP_SIZE; i++) - { - switch (map[i].type) - { - case ISFUNC: - break; - - case ISKMAP: - rl_discard_keymap ((Keymap)map[i].function); - xfree ((char *)map[i].function); - break; - - case ISMACR: - xfree ((char *)map[i].function); - break; - } - } -} - -/* Convenience function that discards, then frees, MAP. */ -void -rl_free_keymap (Keymap map) -{ - rl_discard_keymap (map); - xfree ((char *)map); -} diff --git a/readline/keymaps.h b/readline/keymaps.h deleted file mode 100644 index 1fa853d8c1..0000000000 --- a/readline/keymaps.h +++ /dev/null @@ -1,100 +0,0 @@ -/* keymaps.h -- Manipulation of readline keymaps. */ - -/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#ifndef _KEYMAPS_H_ -#define _KEYMAPS_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined (READLINE_LIBRARY) -# include "rlstdc.h" -# include "chardefs.h" -# include "rltypedefs.h" -#else -# include -# include -# include -#endif - -/* A keymap contains one entry for each key in the ASCII set. - Each entry consists of a type and a pointer. - FUNCTION is the address of a function to run, or the - address of a keymap to indirect through. - TYPE says which kind of thing FUNCTION is. */ -typedef struct _keymap_entry { - char type; - rl_command_func_t *function; -} KEYMAP_ENTRY; - -/* This must be large enough to hold bindings for all of the characters - in a desired character set (e.g, 128 for ASCII, 256 for ISO Latin-x, - and so on) plus one for subsequence matching. */ -#define KEYMAP_SIZE 257 -#define ANYOTHERKEY KEYMAP_SIZE-1 - -typedef KEYMAP_ENTRY KEYMAP_ENTRY_ARRAY[KEYMAP_SIZE]; -typedef KEYMAP_ENTRY *Keymap; - -/* The values that TYPE can have in a keymap entry. */ -#define ISFUNC 0 -#define ISKMAP 1 -#define ISMACR 2 - -extern KEYMAP_ENTRY_ARRAY emacs_standard_keymap, emacs_meta_keymap, emacs_ctlx_keymap; -extern KEYMAP_ENTRY_ARRAY vi_insertion_keymap, vi_movement_keymap; - -/* Return a new, empty keymap. - Free it with free() when you are done. */ -extern Keymap rl_make_bare_keymap PARAMS((void)); - -/* Return a new keymap which is a copy of MAP. */ -extern Keymap rl_copy_keymap PARAMS((Keymap)); - -/* Return a new keymap with the printing characters bound to rl_insert, - the lowercase Meta characters bound to run their equivalents, and - the Meta digits bound to produce numeric arguments. */ -extern Keymap rl_make_keymap PARAMS((void)); - -/* Free the storage associated with a keymap. */ -extern void rl_discard_keymap PARAMS((Keymap)); - -/* These functions actually appear in bind.c */ - -/* Return the keymap corresponding to a given name. Names look like - `emacs' or `emacs-meta' or `vi-insert'. */ -extern Keymap rl_get_keymap_by_name PARAMS((const char *)); - -/* Return the current keymap. */ -extern Keymap rl_get_keymap PARAMS((void)); - -/* Set the current keymap to MAP. */ -extern void rl_set_keymap PARAMS((Keymap)); - -/* Set the name of MAP to NAME */ -extern int rl_set_keymap_name PARAMS((const char *, Keymap)); - -#ifdef __cplusplus -} -#endif - -#endif /* _KEYMAPS_H_ */ diff --git a/readline/kill.c b/readline/kill.c deleted file mode 100644 index cf8ca93243..0000000000 --- a/readline/kill.c +++ /dev/null @@ -1,766 +0,0 @@ -/* kill.c -- kill ring management. */ - -/* Copyright (C) 1994-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include /* for _POSIX_VERSION */ -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -/* **************************************************************** */ -/* */ -/* Killing Mechanism */ -/* */ -/* **************************************************************** */ - -/* What we assume for a max number of kills. */ -#define DEFAULT_MAX_KILLS 10 - -/* The real variable to look at to find out when to flush kills. */ -static int rl_max_kills = DEFAULT_MAX_KILLS; - -/* Where to store killed text. */ -static char **rl_kill_ring = (char **)NULL; - -/* Where we are in the kill ring. */ -static int rl_kill_index; - -/* How many slots we have in the kill ring. */ -static int rl_kill_ring_length; - -static int _rl_copy_to_kill_ring PARAMS((char *, int)); -static int region_kill_internal PARAMS((int)); -static int _rl_copy_word_as_kill PARAMS((int, int)); -static int rl_yank_nth_arg_internal PARAMS((int, int, int)); - -/* How to say that you only want to save a certain amount - of kill material. */ -int -rl_set_retained_kills (int num) -{ - return 0; -} - -/* Add TEXT to the kill ring, allocating a new kill ring slot as necessary. - This uses TEXT directly, so the caller must not free it. If APPEND is - non-zero, and the last command was a kill, the text is appended to the - current kill ring slot, otherwise prepended. */ -static int -_rl_copy_to_kill_ring (char *text, int append) -{ - char *old, *new; - int slot; - - /* First, find the slot to work with. */ - if (_rl_last_command_was_kill == 0 || rl_kill_ring == 0) - { - /* Get a new slot. */ - if (rl_kill_ring == 0) - { - /* If we don't have any defined, then make one. */ - rl_kill_ring = (char **) - xmalloc (((rl_kill_ring_length = 1) + 1) * sizeof (char *)); - rl_kill_ring[slot = 0] = (char *)NULL; - } - else - { - /* We have to add a new slot on the end, unless we have - exceeded the max limit for remembering kills. */ - slot = rl_kill_ring_length; - if (slot == rl_max_kills) - { - register int i; - xfree (rl_kill_ring[0]); - for (i = 0; i < slot; i++) - rl_kill_ring[i] = rl_kill_ring[i + 1]; - } - else - { - slot = rl_kill_ring_length += 1; - rl_kill_ring = (char **)xrealloc (rl_kill_ring, (slot + 1) * sizeof (char *)); - } - rl_kill_ring[--slot] = (char *)NULL; - } - } - else - slot = rl_kill_ring_length - 1; - - /* If the last command was a kill, prepend or append. */ - if (_rl_last_command_was_kill && rl_kill_ring[slot] && rl_editing_mode != vi_mode) - { - old = rl_kill_ring[slot]; - new = (char *)xmalloc (1 + strlen (old) + strlen (text)); - - if (append) - { - strcpy (new, old); - strcat (new, text); - } - else - { - strcpy (new, text); - strcat (new, old); - } - xfree (old); - xfree (text); - rl_kill_ring[slot] = new; - } - else - rl_kill_ring[slot] = text; - - rl_kill_index = slot; - return 0; -} - -/* The way to kill something. This appends or prepends to the last - kill, if the last command was a kill command. if FROM is less - than TO, then the text is appended, otherwise prepended. If the - last command was not a kill command, then a new slot is made for - this kill. */ -int -rl_kill_text (int from, int to) -{ - char *text; - - /* Is there anything to kill? */ - if (from == to) - { - _rl_last_command_was_kill++; - return 0; - } - - text = rl_copy_text (from, to); - - /* Delete the copied text from the line. */ - rl_delete_text (from, to); - - _rl_copy_to_kill_ring (text, from < to); - - _rl_last_command_was_kill++; - return 0; -} - -/* Now REMEMBER! In order to do prepending or appending correctly, kill - commands always make rl_point's original position be the FROM argument, - and rl_point's extent be the TO argument. */ - -/* **************************************************************** */ -/* */ -/* Killing Commands */ -/* */ -/* **************************************************************** */ - -/* Delete the word at point, saving the text in the kill ring. */ -int -rl_kill_word (int count, int key) -{ - int orig_point; - - if (count < 0) - return (rl_backward_kill_word (-count, key)); - else - { - orig_point = rl_point; - rl_forward_word (count, key); - - if (rl_point != orig_point) - rl_kill_text (orig_point, rl_point); - - rl_point = orig_point; - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - return 0; -} - -/* Rubout the word before point, placing it on the kill ring. */ -int -rl_backward_kill_word (int count, int key) -{ - int orig_point; - - if (count < 0) - return (rl_kill_word (-count, key)); - else - { - orig_point = rl_point; - rl_backward_word (count, key); - - if (rl_point != orig_point) - rl_kill_text (orig_point, rl_point); - - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - return 0; -} - -/* Kill from here to the end of the line. If DIRECTION is negative, kill - back to the line start instead. */ -int -rl_kill_line (int direction, int key) -{ - int orig_point; - - if (direction < 0) - return (rl_backward_kill_line (1, key)); - else - { - orig_point = rl_point; - rl_end_of_line (1, key); - if (orig_point != rl_point) - rl_kill_text (orig_point, rl_point); - rl_point = orig_point; - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - return 0; -} - -/* Kill backwards to the start of the line. If DIRECTION is negative, kill - forwards to the line end instead. */ -int -rl_backward_kill_line (int direction, int key) -{ - int orig_point; - - if (direction < 0) - return (rl_kill_line (1, key)); - else - { - if (rl_point == 0) - rl_ding (); - else - { - orig_point = rl_point; - rl_beg_of_line (1, key); - if (rl_point != orig_point) - rl_kill_text (orig_point, rl_point); - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - } - return 0; -} - -/* Kill the whole line, no matter where point is. */ -int -rl_kill_full_line (int count, int key) -{ - rl_begin_undo_group (); - rl_point = 0; - rl_kill_text (rl_point, rl_end); - rl_mark = 0; - rl_end_undo_group (); - return 0; -} - -/* The next two functions mimic unix line editing behaviour, except they - save the deleted text on the kill ring. This is safer than not saving - it, and since we have a ring, nobody should get screwed. */ - -/* This does what C-w does in Unix. We can't prevent people from - using behaviour that they expect. */ -int -rl_unix_word_rubout (int count, int key) -{ - int orig_point; - - if (rl_point == 0) - rl_ding (); - else - { - orig_point = rl_point; - if (count <= 0) - count = 1; - - while (count--) - { - while (rl_point && whitespace (rl_line_buffer[rl_point - 1])) - rl_point--; - - while (rl_point && (whitespace (rl_line_buffer[rl_point - 1]) == 0)) - rl_point--; /* XXX - multibyte? */ - } - - rl_kill_text (orig_point, rl_point); - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - - return 0; -} - -/* This deletes one filename component in a Unix pathname. That is, it - deletes backward to directory separator (`/') or whitespace. */ -int -rl_unix_filename_rubout (int count, int key) -{ - int orig_point, c; - - if (rl_point == 0) - rl_ding (); - else - { - orig_point = rl_point; - if (count <= 0) - count = 1; - - while (count--) - { - c = rl_line_buffer[rl_point - 1]; - while (rl_point && (whitespace (c) || c == '/')) - { - rl_point--; - c = rl_line_buffer[rl_point - 1]; - } - - while (rl_point && (whitespace (c) == 0) && c != '/') - { - rl_point--; /* XXX - multibyte? */ - c = rl_line_buffer[rl_point - 1]; - } - } - - rl_kill_text (orig_point, rl_point); - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - - return 0; -} - -/* Here is C-u doing what Unix does. You don't *have* to use these - key-bindings. We have a choice of killing the entire line, or - killing from where we are to the start of the line. We choose the - latter, because if you are a Unix weenie, then you haven't backspaced - into the line at all, and if you aren't, then you know what you are - doing. */ -int -rl_unix_line_discard (int count, int key) -{ - if (rl_point == 0) - rl_ding (); - else - { - rl_kill_text (rl_point, 0); - rl_point = 0; - if (rl_editing_mode == emacs_mode) - rl_mark = rl_point; - } - return 0; -} - -/* Copy the text in the `region' to the kill ring. If DELETE is non-zero, - delete the text from the line as well. */ -static int -region_kill_internal (int delete) -{ - char *text; - - if (rl_mark != rl_point) - { - text = rl_copy_text (rl_point, rl_mark); - if (delete) - rl_delete_text (rl_point, rl_mark); - _rl_copy_to_kill_ring (text, rl_point < rl_mark); - } - - _rl_last_command_was_kill++; - return 0; -} - -/* Copy the text in the region to the kill ring. */ -int -rl_copy_region_to_kill (int count, int key) -{ - return (region_kill_internal (0)); -} - -/* Kill the text between the point and mark. */ -int -rl_kill_region (int count, int key) -{ - int r, npoint; - - npoint = (rl_point < rl_mark) ? rl_point : rl_mark; - r = region_kill_internal (1); - _rl_fix_point (1); - rl_point = npoint; - return r; -} - -/* Copy COUNT words to the kill ring. DIR says which direction we look - to find the words. */ -static int -_rl_copy_word_as_kill (int count, int dir) -{ - int om, op, r; - - om = rl_mark; - op = rl_point; - - if (dir > 0) - rl_forward_word (count, 0); - else - rl_backward_word (count, 0); - - rl_mark = rl_point; - - if (dir > 0) - rl_backward_word (count, 0); - else - rl_forward_word (count, 0); - - r = region_kill_internal (0); - - rl_mark = om; - rl_point = op; - - return r; -} - -int -rl_copy_forward_word (int count, int key) -{ - if (count < 0) - return (rl_copy_backward_word (-count, key)); - - return (_rl_copy_word_as_kill (count, 1)); -} - -int -rl_copy_backward_word (int count, int key) -{ - if (count < 0) - return (rl_copy_forward_word (-count, key)); - - return (_rl_copy_word_as_kill (count, -1)); -} - -/* Yank back the last killed text. This ignores arguments. */ -int -rl_yank (int count, int key) -{ - if (rl_kill_ring == 0) - { - _rl_abort_internal (); - return 1; - } - - _rl_set_mark_at_pos (rl_point); - rl_insert_text (rl_kill_ring[rl_kill_index]); - return 0; -} - -/* If the last command was yank, or yank_pop, and the text just - before point is identical to the current kill item, then - delete that text from the line, rotate the index down, and - yank back some other text. */ -int -rl_yank_pop (int count, int key) -{ - int l, n; - - if (((rl_last_func != rl_yank_pop) && (rl_last_func != rl_yank)) || - !rl_kill_ring) - { - _rl_abort_internal (); - return 1; - } - - l = strlen (rl_kill_ring[rl_kill_index]); - n = rl_point - l; - if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l)) - { - rl_delete_text (n, rl_point); - rl_point = n; - rl_kill_index--; - if (rl_kill_index < 0) - rl_kill_index = rl_kill_ring_length - 1; - rl_yank (1, 0); - return 0; - } - else - { - _rl_abort_internal (); - return 1; - } -} - -#if defined (VI_MODE) -int -rl_vi_yank_pop (int count, int key) -{ - int l, n; - - if (((rl_last_func != rl_vi_yank_pop) && (rl_last_func != rl_vi_put)) || - !rl_kill_ring) - { - _rl_abort_internal (); - return 1; - } - - l = strlen (rl_kill_ring[rl_kill_index]); - n = rl_point - l; - if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l)) - { - rl_delete_text (n, rl_point); - rl_point = n; - rl_kill_index--; - if (rl_kill_index < 0) - rl_kill_index = rl_kill_ring_length - 1; - rl_vi_put (1, 'p'); - return 0; - } - else - { - _rl_abort_internal (); - return 1; - } -} -#endif /* VI_MODE */ - -/* Yank the COUNTh argument from the previous history line, skipping - HISTORY_SKIP lines before looking for the `previous line'. */ -static int -rl_yank_nth_arg_internal (int count, int key, int history_skip) -{ - register HIST_ENTRY *entry; - char *arg; - int i, pos; - - pos = where_history (); - - if (history_skip) - { - for (i = 0; i < history_skip; i++) - entry = previous_history (); - } - - entry = previous_history (); - - history_set_pos (pos); - - if (entry == 0) - { - rl_ding (); - return 1; - } - - arg = history_arg_extract (count, count, entry->line); - if (!arg || !*arg) - { - rl_ding (); - FREE (arg); - return 1; - } - - rl_begin_undo_group (); - - _rl_set_mark_at_pos (rl_point); - -#if defined (VI_MODE) - /* Vi mode always inserts a space before yanking the argument, and it - inserts it right *after* rl_point. */ - if (rl_editing_mode == vi_mode) - { - rl_vi_append_mode (1, key); - rl_insert_text (" "); - } -#endif /* VI_MODE */ - - rl_insert_text (arg); - xfree (arg); - - rl_end_undo_group (); - return 0; -} - -/* Yank the COUNTth argument from the previous history line. */ -int -rl_yank_nth_arg (int count, int key) -{ - return (rl_yank_nth_arg_internal (count, key, 0)); -} - -/* Yank the last argument from the previous history line. This `knows' - how rl_yank_nth_arg treats a count of `$'. With an argument, this - behaves the same as rl_yank_nth_arg. */ -int -rl_yank_last_arg (int count, int key) -{ - static int history_skip = 0; - static int explicit_arg_p = 0; - static int count_passed = 1; - static int direction = 1; - static int undo_needed = 0; - int retval; - - if (rl_last_func != rl_yank_last_arg) - { - history_skip = 0; - explicit_arg_p = rl_explicit_arg; - count_passed = count; - direction = 1; - } - else - { - if (undo_needed) - rl_do_undo (); - if (count < 0) /* XXX - was < 1 */ - direction = -direction; - history_skip += direction; - if (history_skip < 0) - history_skip = 0; - } - - if (explicit_arg_p) - retval = rl_yank_nth_arg_internal (count_passed, key, history_skip); - else - retval = rl_yank_nth_arg_internal ('$', key, history_skip); - - undo_needed = retval == 0; - return retval; -} - -/* Having read the special escape sequence denoting the beginning of a - `bracketed paste' sequence, read the rest of the pasted input until the - closing sequence and insert the pasted text as a single unit without - interpretation. */ -char * -_rl_bracketed_text (size_t *lenp) -{ - int c; - size_t len, cap; - char *buf; - - len = 0; - buf = xmalloc (cap = 64); - buf[0] = '\0'; - - RL_SETSTATE (RL_STATE_MOREINPUT); - while ((c = rl_read_key ()) >= 0) - { - if (RL_ISSTATE (RL_STATE_MACRODEF)) - _rl_add_macro_char (c); - - if (c == '\r') /* XXX */ - c = '\n'; - - if (len == cap) - buf = xrealloc (buf, cap *= 2); - - buf[len++] = c; - if (len >= BRACK_PASTE_SLEN && c == BRACK_PASTE_LAST && - STREQN (buf + len - BRACK_PASTE_SLEN, BRACK_PASTE_SUFF, BRACK_PASTE_SLEN)) - { - len -= BRACK_PASTE_SLEN; - break; - } - } - RL_UNSETSTATE (RL_STATE_MOREINPUT); - - if (c >= 0) - { - if (len == cap) - buf = xrealloc (buf, cap + 1); - buf[len] = '\0'; - } - - if (lenp) - *lenp = len; - return (buf); -} - -int -rl_bracketed_paste_begin (int count, int key) -{ - int retval, c; - size_t len, cap; - char *buf; - - buf = _rl_bracketed_text (&len); - retval = rl_insert_text (buf) == len ? 0 : 1; - - xfree (buf); - return (retval); -} - -/* A special paste command for Windows users. */ -#if defined (_WIN32) -#include - -int -rl_paste_from_clipboard (int count, int key) -{ - char *data, *ptr; - int len; - - if (OpenClipboard (NULL) == 0) - return (0); - - data = (char *)GetClipboardData (CF_TEXT); - if (data) - { - ptr = strchr (data, '\r'); - if (ptr) - { - len = ptr - data; - ptr = (char *)xmalloc (len + 1); - ptr[len] = '\0'; - strncpy (ptr, data, len); - } - else - ptr = data; - _rl_set_mark_at_pos (rl_point); - rl_insert_text (ptr); - if (ptr != data) - xfree (ptr); - CloseClipboard (); - } - return (0); -} -#endif /* _WIN32 */ diff --git a/readline/macro.c b/readline/macro.c deleted file mode 100644 index 92cc55c36d..0000000000 --- a/readline/macro.c +++ /dev/null @@ -1,332 +0,0 @@ -/* macro.c -- keyboard macros for readline. */ - -/* Copyright (C) 1994-2009,2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include /* for _POSIX_VERSION */ -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -#define MAX_MACRO_LEVEL 16 - -/* **************************************************************** */ -/* */ -/* Hacking Keyboard Macros */ -/* */ -/* **************************************************************** */ - -/* The currently executing macro string. If this is non-zero, - then it is a malloc ()'ed string where input is coming from. */ -char *rl_executing_macro = (char *)NULL; - -/* The offset in the above string to the next character to be read. */ -static int executing_macro_index; - -/* The current macro string being built. Characters get stuffed - in here by add_macro_char (). */ -static char *current_macro = (char *)NULL; - -/* The size of the buffer allocated to current_macro. */ -static int current_macro_size; - -/* The index at which characters are being added to current_macro. */ -static int current_macro_index; - -/* A structure used to save nested macro strings. - It is a linked list of string/index for each saved macro. */ -struct saved_macro { - struct saved_macro *next; - char *string; - int sindex; -}; - -/* The list of saved macros. */ -static struct saved_macro *macro_list = (struct saved_macro *)NULL; - -static int macro_level = 0; - -/* Set up to read subsequent input from STRING. - STRING is free ()'ed when we are done with it. */ -void -_rl_with_macro_input (char *string) -{ - if (macro_level > MAX_MACRO_LEVEL) - { - _rl_errmsg ("maximum macro execution nesting level exceeded"); - _rl_abort_internal (); - return; - } - -#if 0 - if (rl_executing_macro) /* XXX - later */ -#endif - _rl_push_executing_macro (); - rl_executing_macro = string; - executing_macro_index = 0; - RL_SETSTATE(RL_STATE_MACROINPUT); -} - -/* Return the next character available from a macro, or 0 if - there are no macro characters. */ -int -_rl_next_macro_key (void) -{ - int c; - - if (rl_executing_macro == 0) - return (0); - - if (rl_executing_macro[executing_macro_index] == 0) - { - _rl_pop_executing_macro (); - return (_rl_next_macro_key ()); - } - -#if defined (READLINE_CALLBACKS) - c = rl_executing_macro[executing_macro_index++]; - if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_READCMD|RL_STATE_MOREINPUT) && rl_executing_macro[executing_macro_index] == 0) - _rl_pop_executing_macro (); - return c; -#else - /* XXX - consider doing the same as the callback code, just not testing - whether we're running in callback mode */ - return (rl_executing_macro[executing_macro_index++]); -#endif -} - -int -_rl_peek_macro_key (void) -{ - if (rl_executing_macro == 0) - return (0); - if (rl_executing_macro[executing_macro_index] == 0 && (macro_list == 0 || macro_list->string == 0)) - return (0); - if (rl_executing_macro[executing_macro_index] == 0 && macro_list && macro_list->string) - return (macro_list->string[0]); - return (rl_executing_macro[executing_macro_index]); -} - -int -_rl_prev_macro_key (void) -{ - if (rl_executing_macro == 0) - return (0); - - if (executing_macro_index == 0) - return (0); - - executing_macro_index--; - return (rl_executing_macro[executing_macro_index]); -} - -/* Save the currently executing macro on a stack of saved macros. */ -void -_rl_push_executing_macro (void) -{ - struct saved_macro *saver; - - saver = (struct saved_macro *)xmalloc (sizeof (struct saved_macro)); - saver->next = macro_list; - saver->sindex = executing_macro_index; - saver->string = rl_executing_macro; - - macro_list = saver; - - macro_level++; -} - -/* Discard the current macro, replacing it with the one - on the top of the stack of saved macros. */ -void -_rl_pop_executing_macro (void) -{ - struct saved_macro *macro; - - FREE (rl_executing_macro); - rl_executing_macro = (char *)NULL; - executing_macro_index = 0; - - if (macro_list) - { - macro = macro_list; - rl_executing_macro = macro_list->string; - executing_macro_index = macro_list->sindex; - macro_list = macro_list->next; - xfree (macro); - } - - macro_level--; - - if (rl_executing_macro == 0) - RL_UNSETSTATE(RL_STATE_MACROINPUT); -} - -/* Add a character to the macro being built. */ -void -_rl_add_macro_char (int c) -{ - if (current_macro_index + 1 >= current_macro_size) - { - if (current_macro == 0) - current_macro = (char *)xmalloc (current_macro_size = 25); - else - current_macro = (char *)xrealloc (current_macro, current_macro_size += 25); - } - - current_macro[current_macro_index++] = c; - current_macro[current_macro_index] = '\0'; -} - -void -_rl_kill_kbd_macro (void) -{ - if (current_macro) - { - xfree (current_macro); - current_macro = (char *) NULL; - } - current_macro_size = current_macro_index = 0; - - FREE (rl_executing_macro); - rl_executing_macro = (char *) NULL; - executing_macro_index = 0; - - RL_UNSETSTATE(RL_STATE_MACRODEF); -} - -/* Begin defining a keyboard macro. - Keystrokes are recorded as they are executed. - End the definition with rl_end_kbd_macro (). - If a numeric argument was explicitly typed, then append this - definition to the end of the existing macro, and start by - re-executing the existing macro. */ -int -rl_start_kbd_macro (int ignore1, int ignore2) -{ - if (RL_ISSTATE (RL_STATE_MACRODEF)) - { - _rl_abort_internal (); - return 1; - } - - if (rl_explicit_arg) - { - if (current_macro) - _rl_with_macro_input (savestring (current_macro)); - } - else - current_macro_index = 0; - - RL_SETSTATE(RL_STATE_MACRODEF); - return 0; -} - -/* Stop defining a keyboard macro. - A numeric argument says to execute the macro right now, - that many times, counting the definition as the first time. */ -int -rl_end_kbd_macro (int count, int ignore) -{ - if (RL_ISSTATE (RL_STATE_MACRODEF) == 0) - { - _rl_abort_internal (); - return 1; - } - - current_macro_index -= rl_key_sequence_length; - current_macro[current_macro_index] = '\0'; - - RL_UNSETSTATE(RL_STATE_MACRODEF); - - return (rl_call_last_kbd_macro (--count, 0)); -} - -/* Execute the most recently defined keyboard macro. - COUNT says how many times to execute it. */ -int -rl_call_last_kbd_macro (int count, int ignore) -{ - if (current_macro == 0) - _rl_abort_internal (); - - if (RL_ISSTATE (RL_STATE_MACRODEF)) - { - rl_ding (); /* no recursive macros */ - current_macro[--current_macro_index] = '\0'; /* erase this char */ - return 0; - } - - while (count--) - _rl_with_macro_input (savestring (current_macro)); - return 0; -} - -int -rl_print_last_kbd_macro (int count, int ignore) -{ - char *m; - - if (current_macro == 0) - { - rl_ding (); - return 0; - } - m = _rl_untranslate_macro_value (current_macro, 1); - rl_crlf (); - printf ("%s", m); - fflush (stdout); - rl_crlf (); - FREE (m); - rl_forced_update_display (); - rl_display_fixed = 1; - - return 0; -} - -void -rl_push_macro_input (char *macro) -{ - _rl_with_macro_input (macro); -} diff --git a/readline/mbutil.c b/readline/mbutil.c deleted file mode 100644 index 17716357fe..0000000000 --- a/readline/mbutil.c +++ /dev/null @@ -1,440 +0,0 @@ -/* mbutil.c -- readline multibyte character utility functions */ - -/* Copyright (C) 2001-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include "posixjmp.h" - -#if defined (HAVE_UNISTD_H) -# include /* for _POSIX_VERSION */ -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -#if defined (TIOCSTAT_IN_SYS_IOCTL) -# include -#endif /* TIOCSTAT_IN_SYS_IOCTL */ - -/* Some standard library routines. */ -#include "readline.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -/* Declared here so it can be shared between the readline and history - libraries. */ -#if defined (HANDLE_MULTIBYTE) -int rl_byte_oriented = 0; -#else -int rl_byte_oriented = 1; -#endif - -/* Ditto */ -int _rl_utf8locale = 0; - -/* **************************************************************** */ -/* */ -/* Multibyte Character Utility Functions */ -/* */ -/* **************************************************************** */ - -#if defined(HANDLE_MULTIBYTE) - -/* **************************************************************** */ -/* */ -/* UTF-8 specific Character Utility Functions */ -/* */ -/* **************************************************************** */ - -/* Return the length in bytes of the possibly-multibyte character beginning - at S. Encoding is UTF-8. */ -static int -_rl_utf8_mblen (const char *s, size_t n) -{ - unsigned char c, c1; - - if (s == 0) - return (0); /* no shift states */ - if (n <= 0) - return (-1); - - c = (unsigned char)*s; - if (c < 0x80) - return (c != 0); - if (c >= 0xc2) - { - c1 = (unsigned char)s[1]; - if (c < 0xe0) - { - if (n >= 2 && (s[1] ^ 0x80) < 0x40) - return 2; - } - else if (c < 0xf0) - { - if (n >= 3 - && (s[1] ^ 0x80) < 0x40 && (s[2] ^ 0x80) < 0x40 - && (c >= 0xe1 || c1 >= 0xa0) - && (c != 0xed || c1 < 0xa0)) - return 3; - } - else if (c < 0xf8) - { - if (n >= 4 - && (s[1] ^ 0x80) < 0x40 && (s[2] ^ 0x80) < 0x40 - && (s[3] ^ 0x80) < 0x40 - && (c >= 0xf1 || c1 >= 0x90) - && (c < 0xf4 || (c == 0xf4 && c1 < 0x90))) - return 4; - } - } - /* invalid or incomplete multibyte character */ - return -1; -} - -static int -_rl_find_next_mbchar_internal (char *string, int seed, int count, int find_non_zero) -{ - size_t tmp, len; - mbstate_t ps; - int point; - wchar_t wc; - - tmp = 0; - - memset(&ps, 0, sizeof (mbstate_t)); - if (seed < 0) - seed = 0; - if (count <= 0) - return seed; - - point = seed + _rl_adjust_point (string, seed, &ps); - /* if _rl_adjust_point returns -1, the character or string is invalid. - treat as a byte. */ - if (point == seed - 1) /* invalid */ - return seed + 1; - - /* if this is true, means that seed was not pointing to a byte indicating - the beginning of a multibyte character. Correct the point and consume - one char. */ - if (seed < point) - count--; - - while (count > 0) - { - len = strlen (string + point); - if (len == 0) - break; - if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point])) - { - tmp = 1; - wc = (wchar_t) string[point]; - memset(&ps, 0, sizeof(mbstate_t)); - } - else - tmp = mbrtowc (&wc, string+point, len, &ps); - if (MB_INVALIDCH ((size_t)tmp)) - { - /* invalid bytes. assume a byte represents a character */ - point++; - count--; - /* reset states. */ - memset(&ps, 0, sizeof(mbstate_t)); - } - else if (MB_NULLWCH (tmp)) - break; /* found wide '\0' */ - else - { - /* valid bytes */ - point += tmp; - if (find_non_zero) - { - if (WCWIDTH (wc) == 0) - continue; - else - count--; - } - else - count--; - } - } - - if (find_non_zero) - { - tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps); - while (MB_NULLWCH (tmp) == 0 && MB_INVALIDCH (tmp) == 0 && WCWIDTH (wc) == 0) - { - point += tmp; - tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps); - } - } - - return point; -} - -/*static*/ int -_rl_find_prev_mbchar_internal (char *string, int seed, int find_non_zero) -{ - mbstate_t ps; - int prev, non_zero_prev, point, length; - size_t tmp; - wchar_t wc; - - memset(&ps, 0, sizeof(mbstate_t)); - length = strlen(string); - - if (seed < 0) - return 0; - else if (length < seed) - return length; - - prev = non_zero_prev = point = 0; - while (point < seed) - { - if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point])) - { - tmp = 1; - wc = (wchar_t) string[point]; - memset(&ps, 0, sizeof(mbstate_t)); - } - else - tmp = mbrtowc (&wc, string + point, length - point, &ps); - if (MB_INVALIDCH ((size_t)tmp)) - { - /* in this case, bytes are invalid or too short to compose - multibyte char, so assume that the first byte represents - a single character anyway. */ - tmp = 1; - /* clear the state of the byte sequence, because - in this case effect of mbstate is undefined */ - memset(&ps, 0, sizeof (mbstate_t)); - - /* Since we're assuming that this byte represents a single - non-zero-width character, don't forget about it. */ - prev = point; - } - else if (MB_NULLWCH (tmp)) - break; /* Found '\0' char. Can this happen? */ - else - { - if (find_non_zero) - { - if (WCWIDTH (wc) != 0) - prev = point; - } - else - prev = point; - } - - point += tmp; - } - - return prev; -} - -/* return the number of bytes parsed from the multibyte sequence starting - at src, if a non-L'\0' wide character was recognized. It returns 0, - if a L'\0' wide character was recognized. It returns (size_t)(-1), - if an invalid multibyte sequence was encountered. It returns (size_t)(-2) - if it couldn't parse a complete multibyte character. */ -int -_rl_get_char_len (char *src, mbstate_t *ps) -{ - size_t tmp, l; - int mb_cur_max; - - /* Look at no more than MB_CUR_MAX characters */ - l = (size_t)strlen (src); - if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src)) - tmp = (*src != 0) ? 1 : 0; - else - { - mb_cur_max = MB_CUR_MAX; - tmp = mbrlen((const char *)src, (l < mb_cur_max) ? l : mb_cur_max, ps); - } - if (tmp == (size_t)(-2)) - { - /* too short to compose multibyte char */ - if (ps) - memset (ps, 0, sizeof(mbstate_t)); - return -2; - } - else if (tmp == (size_t)(-1)) - { - /* invalid to compose multibyte char */ - /* initialize the conversion state */ - if (ps) - memset (ps, 0, sizeof(mbstate_t)); - return -1; - } - else if (tmp == (size_t)0) - return 0; - else - return (int)tmp; -} - -/* compare the specified two characters. If the characters matched, - return 1. Otherwise return 0. */ -int -_rl_compare_chars (char *buf1, int pos1, mbstate_t *ps1, char *buf2, int pos2, mbstate_t *ps2) -{ - int i, w1, w2; - - if ((w1 = _rl_get_char_len (&buf1[pos1], ps1)) <= 0 || - (w2 = _rl_get_char_len (&buf2[pos2], ps2)) <= 0 || - (w1 != w2) || - (buf1[pos1] != buf2[pos2])) - return 0; - - for (i = 1; i < w1; i++) - if (buf1[pos1+i] != buf2[pos2+i]) - return 0; - - return 1; -} - -/* adjust pointed byte and find mbstate of the point of string. - adjusted point will be point <= adjusted_point, and returns - differences of the byte(adjusted_point - point). - if point is invalid (point < 0 || more than string length), - it returns -1 */ -int -_rl_adjust_point (char *string, int point, mbstate_t *ps) -{ - size_t tmp; - int length, pos; - - tmp = 0; - pos = 0; - length = strlen(string); - if (point < 0) - return -1; - if (length < point) - return -1; - - while (pos < point) - { - if (_rl_utf8locale && UTF8_SINGLEBYTE(string[pos])) - tmp = 1; - else - tmp = mbrlen (string + pos, length - pos, ps); - if (MB_INVALIDCH ((size_t)tmp)) - { - /* in this case, bytes are invalid or too short to compose - multibyte char, so assume that the first byte represents - a single character anyway. */ - pos++; - /* clear the state of the byte sequence, because - in this case effect of mbstate is undefined */ - if (ps) - memset (ps, 0, sizeof (mbstate_t)); - } - else if (MB_NULLWCH (tmp)) - pos++; - else - pos += tmp; - } - - return (pos - point); -} - -int -_rl_is_mbchar_matched (char *string, int seed, int end, char *mbchar, int length) -{ - int i; - - if ((end - seed) < length) - return 0; - - for (i = 0; i < length; i++) - if (string[seed + i] != mbchar[i]) - return 0; - return 1; -} - -wchar_t -_rl_char_value (char *buf, int ind) -{ - size_t tmp; - wchar_t wc; - mbstate_t ps; - int l; - - if (MB_LEN_MAX == 1 || rl_byte_oriented) - return ((wchar_t) buf[ind]); - if (_rl_utf8locale && UTF8_SINGLEBYTE(buf[ind])) - return ((wchar_t) buf[ind]); - l = strlen (buf); - if (ind >= l - 1) - return ((wchar_t) buf[ind]); - if (l < ind) /* Sanity check */ - l = strlen (buf+ind); - memset (&ps, 0, sizeof (mbstate_t)); - tmp = mbrtowc (&wc, buf + ind, l - ind, &ps); - if (MB_INVALIDCH (tmp) || MB_NULLWCH (tmp)) - return ((wchar_t) buf[ind]); - return wc; -} -#endif /* HANDLE_MULTIBYTE */ - -/* Find next `count' characters started byte point of the specified seed. - If flags is MB_FIND_NONZERO, we look for non-zero-width multibyte - characters. */ -#undef _rl_find_next_mbchar -int -_rl_find_next_mbchar (char *string, int seed, int count, int flags) -{ -#if defined (HANDLE_MULTIBYTE) - return _rl_find_next_mbchar_internal (string, seed, count, flags); -#else - return (seed + count); -#endif -} - -/* Find previous character started byte point of the specified seed. - Returned point will be point <= seed. If flags is MB_FIND_NONZERO, - we look for non-zero-width multibyte characters. */ -#undef _rl_find_prev_mbchar -int -_rl_find_prev_mbchar (char *string, int seed, int flags) -{ -#if defined (HANDLE_MULTIBYTE) - return _rl_find_prev_mbchar_internal (string, seed, flags); -#else - return ((seed == 0) ? seed : seed - 1); -#endif -} diff --git a/readline/misc.c b/readline/misc.c deleted file mode 100644 index 64b1457d29..0000000000 --- a/readline/misc.c +++ /dev/null @@ -1,681 +0,0 @@ -/* misc.c -- miscellaneous bindable readline functions. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_LOCALE_H) -# include -#endif - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -static int rl_digit_loop PARAMS((void)); -static void _rl_history_set_point PARAMS((void)); - -/* Forward declarations used in this file */ -void _rl_free_history_entry PARAMS((HIST_ENTRY *)); - -/* If non-zero, rl_get_previous_history and rl_get_next_history attempt - to preserve the value of rl_point from line to line. */ -int _rl_history_preserve_point = 0; - -_rl_arg_cxt _rl_argcxt; - -/* Saved target point for when _rl_history_preserve_point is set. Special - value of -1 means that point is at the end of the line. */ -int _rl_history_saved_point = -1; - -/* **************************************************************** */ -/* */ -/* Numeric Arguments */ -/* */ -/* **************************************************************** */ - -int -_rl_arg_overflow (void) -{ - if (rl_numeric_arg > 1000000) - { - _rl_argcxt = 0; - rl_explicit_arg = rl_numeric_arg = 0; - rl_ding (); - rl_restore_prompt (); - rl_clear_message (); - RL_UNSETSTATE(RL_STATE_NUMERICARG); - return 1; - } - return 0; -} - -void -_rl_arg_init (void) -{ - rl_save_prompt (); - _rl_argcxt = 0; - RL_SETSTATE(RL_STATE_NUMERICARG); -} - -int -_rl_arg_getchar (void) -{ - int c; - - rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - return c; -} - -/* Process C as part of the current numeric argument. Return -1 if the - argument should be aborted, 0 if we should not read any more chars, and - 1 if we should continue to read chars. */ -int -_rl_arg_dispatch (_rl_arg_cxt cxt, int c) -{ - int key, r; - - key = c; - - /* If we see a key bound to `universal-argument' after seeing digits, - it ends the argument but is otherwise ignored. */ - if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument) - { - if ((cxt & NUM_SAWDIGITS) == 0) - { - rl_numeric_arg *= 4; - return 1; - } - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_argcxt |= NUM_READONE; - return 0; /* XXX */ - } - else - { - RL_SETSTATE(RL_STATE_MOREINPUT); - key = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - rl_restore_prompt (); - rl_clear_message (); - RL_UNSETSTATE(RL_STATE_NUMERICARG); - if (key < 0) - return -1; - return (_rl_dispatch (key, _rl_keymap)); - } - } - - c = UNMETA (c); - - if (_rl_digit_p (c)) - { - r = _rl_digit_value (c); - rl_numeric_arg = rl_explicit_arg ? (rl_numeric_arg * 10) + r : r; - rl_explicit_arg = 1; - _rl_argcxt |= NUM_SAWDIGITS; - } - else if (c == '-' && rl_explicit_arg == 0) - { - rl_numeric_arg = 1; - _rl_argcxt |= NUM_SAWMINUS; - rl_arg_sign = -1; - } - else - { - /* Make M-- command equivalent to M--1 command. */ - if ((_rl_argcxt & NUM_SAWMINUS) && rl_numeric_arg == 1 && rl_explicit_arg == 0) - rl_explicit_arg = 1; - rl_restore_prompt (); - rl_clear_message (); - RL_UNSETSTATE(RL_STATE_NUMERICARG); - - r = _rl_dispatch (key, _rl_keymap); - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - /* At worst, this will cause an extra redisplay. Otherwise, - we have to wait until the next character comes in. */ - if (rl_done == 0) - (*rl_redisplay_function) (); - r = 0; - } - return r; - } - - return 1; -} - -/* Handle C-u style numeric args, as well as M--, and M-digits. */ -static int -rl_digit_loop (void) -{ - int c, r; - - while (1) - { - if (_rl_arg_overflow ()) - return 1; - - c = _rl_arg_getchar (); - - if (c < 0) - { - _rl_abort_internal (); - return -1; - } - - r = _rl_arg_dispatch (_rl_argcxt, c); - if (r <= 0 || (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)) - break; - } - - return r; -} - -/* Create a default argument. */ -void -_rl_reset_argument (void) -{ - rl_numeric_arg = rl_arg_sign = 1; - rl_explicit_arg = 0; - _rl_argcxt = 0; -} - -/* Start a numeric argument with initial value KEY */ -int -rl_digit_argument (int ignore, int key) -{ - _rl_arg_init (); - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_arg_dispatch (_rl_argcxt, key); - rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); - return 0; - } - else - { - rl_execute_next (key); - return (rl_digit_loop ()); - } -} - -/* C-u, universal argument. Multiply the current argument by 4. - Read a key. If the key has nothing to do with arguments, then - dispatch on it. If the key is the abort character then abort. */ -int -rl_universal_argument (int count, int key) -{ - _rl_arg_init (); - rl_numeric_arg *= 4; - - return (RL_ISSTATE (RL_STATE_CALLBACK) ? 0 : rl_digit_loop ()); -} - -int -_rl_arg_callback (_rl_arg_cxt cxt) -{ - int c, r; - - c = _rl_arg_getchar (); - if (c < 0) - return (1); /* EOF */ - - if (_rl_argcxt & NUM_READONE) - { - _rl_argcxt &= ~NUM_READONE; - rl_restore_prompt (); - rl_clear_message (); - RL_UNSETSTATE(RL_STATE_NUMERICARG); - rl_execute_next (c); - return 0; - } - - r = _rl_arg_dispatch (cxt, c); - if (r > 0) - rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); - return (r != 1); -} - -/* What to do when you abort reading an argument. */ -int -rl_discard_argument (void) -{ - rl_ding (); - rl_clear_message (); - _rl_reset_argument (); - - return 0; -} - -/* **************************************************************** */ -/* */ -/* History Utilities */ -/* */ -/* **************************************************************** */ - -/* We already have a history library, and that is what we use to control - the history features of readline. This is our local interface to - the history mechanism. */ - -/* While we are editing the history, this is the saved - version of the original line. */ -HIST_ENTRY *_rl_saved_line_for_history = (HIST_ENTRY *)NULL; - -/* Set the history pointer back to the last entry in the history. */ -void -_rl_start_using_history (void) -{ - using_history (); - if (_rl_saved_line_for_history) - _rl_free_history_entry (_rl_saved_line_for_history); - - _rl_saved_line_for_history = (HIST_ENTRY *)NULL; -} - -/* Free the contents (and containing structure) of a HIST_ENTRY. */ -void -_rl_free_history_entry (HIST_ENTRY *entry) -{ - if (entry == 0) - return; - - FREE (entry->line); - FREE (entry->timestamp); - - xfree (entry); -} - -/* Perhaps put back the current line if it has changed. */ -int -rl_maybe_replace_line (void) -{ - HIST_ENTRY *temp; - - temp = current_history (); - /* If the current line has changed, save the changes. */ - if (temp && ((UNDO_LIST *)(temp->data) != rl_undo_list)) - { - temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list); - xfree (temp->line); - FREE (temp->timestamp); - xfree (temp); - } - return 0; -} - -/* Restore the _rl_saved_line_for_history if there is one. */ -int -rl_maybe_unsave_line (void) -{ - if (_rl_saved_line_for_history) - { - /* Can't call with `1' because rl_undo_list might point to an undo - list from a history entry, as in rl_replace_from_history() below. */ - rl_replace_line (_rl_saved_line_for_history->line, 0); - rl_undo_list = (UNDO_LIST *)_rl_saved_line_for_history->data; - _rl_free_history_entry (_rl_saved_line_for_history); - _rl_saved_line_for_history = (HIST_ENTRY *)NULL; - rl_point = rl_end; /* rl_replace_line sets rl_end */ - } - else - rl_ding (); - return 0; -} - -/* Save the current line in _rl_saved_line_for_history. */ -int -rl_maybe_save_line (void) -{ - if (_rl_saved_line_for_history == 0) - { - _rl_saved_line_for_history = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); - _rl_saved_line_for_history->line = savestring (rl_line_buffer); - _rl_saved_line_for_history->timestamp = (char *)NULL; - _rl_saved_line_for_history->data = (char *)rl_undo_list; - } - - return 0; -} - -int -_rl_free_saved_history_line (void) -{ - if (_rl_saved_line_for_history) - { - _rl_free_history_entry (_rl_saved_line_for_history); - _rl_saved_line_for_history = (HIST_ENTRY *)NULL; - } - return 0; -} - -static void -_rl_history_set_point (void) -{ - rl_point = (_rl_history_preserve_point && _rl_history_saved_point != -1) - ? _rl_history_saved_point - : rl_end; - if (rl_point > rl_end) - rl_point = rl_end; - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode && _rl_keymap != vi_insertion_keymap) - rl_point = 0; -#endif /* VI_MODE */ - - if (rl_editing_mode == emacs_mode) - rl_mark = (rl_point == rl_end ? 0 : rl_end); -} - -void -rl_replace_from_history (HIST_ENTRY *entry, int flags) -{ - /* Can't call with `1' because rl_undo_list might point to an undo list - from a history entry, just like we're setting up here. */ - rl_replace_line (entry->line, 0); - rl_undo_list = (UNDO_LIST *)entry->data; - rl_point = rl_end; - rl_mark = 0; - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - { - rl_point = 0; - rl_mark = rl_end; - } -#endif -} - -/* Process and free undo lists attached to each history entry prior to the - current entry, inclusive, reverting each line to its saved state. This - is destructive, and state about the current line is lost. This is not - intended to be called while actively editing, and the current line is - not assumed to have been added to the history list. */ -void -_rl_revert_all_lines (void) -{ - int hpos; - HIST_ENTRY *entry; - UNDO_LIST *ul, *saved_undo_list; - char *lbuf; - - lbuf = savestring (rl_line_buffer); - saved_undo_list = rl_undo_list; - hpos = where_history (); - - entry = (hpos == history_length) ? previous_history () : current_history (); - while (entry) - { - if (ul = (UNDO_LIST *)entry->data) - { - if (ul == saved_undo_list) - saved_undo_list = 0; - /* Set up rl_line_buffer and other variables from history entry */ - rl_replace_from_history (entry, 0); /* entry->line is now current */ - entry->data = 0; /* entry->data is now current undo list */ - /* Undo all changes to this history entry */ - while (rl_undo_list) - rl_do_undo (); - /* And copy the reverted line back to the history entry, preserving - the timestamp. */ - FREE (entry->line); - entry->line = savestring (rl_line_buffer); - } - entry = previous_history (); - } - - /* Restore history state */ - rl_undo_list = saved_undo_list; /* may have been set to null */ - history_set_pos (hpos); - - /* reset the line buffer */ - rl_replace_line (lbuf, 0); - _rl_set_the_line (); - - /* and clean up */ - xfree (lbuf); -} - -/* Free the history list, including private readline data and take care - of pointer aliases to history data. Resets rl_undo_list if it points - to an UNDO_LIST * saved as some history entry's data member. This - should not be called while editing is active. */ -void -rl_clear_history (void) -{ - HIST_ENTRY **hlist, *hent; - register int i; - UNDO_LIST *ul, *saved_undo_list; - - saved_undo_list = rl_undo_list; - hlist = history_list (); /* direct pointer, not copy */ - - for (i = 0; i < history_length; i++) - { - hent = hlist[i]; - if (ul = (UNDO_LIST *)hent->data) - { - if (ul == saved_undo_list) - saved_undo_list = 0; - _rl_free_undo_list (ul); - hent->data = 0; - } - _rl_free_history_entry (hent); - } - - history_offset = history_length = 0; - rl_undo_list = saved_undo_list; /* should be NULL */ -} - -/* **************************************************************** */ -/* */ -/* History Commands */ -/* */ -/* **************************************************************** */ - -/* Meta-< goes to the start of the history. */ -int -rl_beginning_of_history (int count, int key) -{ - return (rl_get_previous_history (1 + where_history (), key)); -} - -/* Meta-> goes to the end of the history. (The current line). */ -int -rl_end_of_history (int count, int key) -{ - rl_maybe_replace_line (); - using_history (); - rl_maybe_unsave_line (); - return 0; -} - -/* Move down to the next history line. */ -int -rl_get_next_history (int count, int key) -{ - HIST_ENTRY *temp; - - if (count < 0) - return (rl_get_previous_history (-count, key)); - - if (count == 0) - return 0; - - rl_maybe_replace_line (); - - /* either not saved by rl_newline or at end of line, so set appropriately. */ - if (_rl_history_saved_point == -1 && (rl_point || rl_end)) - _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; - - temp = (HIST_ENTRY *)NULL; - while (count) - { - temp = next_history (); - if (!temp) - break; - --count; - } - - if (temp == 0) - rl_maybe_unsave_line (); - else - { - rl_replace_from_history (temp, 0); - _rl_history_set_point (); - } - return 0; -} - -/* Get the previous item out of our interactive history, making it the current - line. If there is no previous history, just ding. */ -int -rl_get_previous_history (int count, int key) -{ - HIST_ENTRY *old_temp, *temp; - - if (count < 0) - return (rl_get_next_history (-count, key)); - - if (count == 0 || history_list () == 0) - return 0; - - /* either not saved by rl_newline or at end of line, so set appropriately. */ - if (_rl_history_saved_point == -1 && (rl_point || rl_end)) - _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; - - /* If we don't have a line saved, then save this one. */ - rl_maybe_save_line (); - - /* If the current line has changed, save the changes. */ - rl_maybe_replace_line (); - - temp = old_temp = (HIST_ENTRY *)NULL; - while (count) - { - temp = previous_history (); - if (temp == 0) - break; - - old_temp = temp; - --count; - } - - /* If there was a large argument, and we moved back to the start of the - history, that is not an error. So use the last value found. */ - if (!temp && old_temp) - temp = old_temp; - - if (temp == 0) - { - rl_maybe_unsave_line (); - rl_ding (); - } - else - { - rl_replace_from_history (temp, 0); - _rl_history_set_point (); - } - - return 0; -} - -/* **************************************************************** */ -/* */ -/* Editing Modes */ -/* */ -/* **************************************************************** */ -/* How to toggle back and forth between editing modes. */ -int -rl_vi_editing_mode (int count, int key) -{ -#if defined (VI_MODE) - _rl_set_insert_mode (RL_IM_INSERT, 1); /* vi mode ignores insert mode */ - rl_editing_mode = vi_mode; - rl_vi_insert_mode (1, key); -#endif /* VI_MODE */ - - return 0; -} - -int -rl_emacs_editing_mode (int count, int key) -{ - rl_editing_mode = emacs_mode; - _rl_set_insert_mode (RL_IM_INSERT, 1); /* emacs mode default is insert mode */ - _rl_keymap = emacs_standard_keymap; - - if (_rl_show_mode_in_prompt) - _rl_reset_prompt (); - - return 0; -} - -/* Function for the rest of the library to use to set insert/overwrite mode. */ -void -_rl_set_insert_mode (int im, int force) -{ -#ifdef CURSOR_MODE - _rl_set_cursor (im, force); -#endif - - rl_insert_mode = im; -} - -/* Toggle overwrite mode. A positive explicit argument selects overwrite - mode. A negative or zero explicit argument selects insert mode. */ -int -rl_overwrite_mode (int count, int key) -{ - if (rl_explicit_arg == 0) - _rl_set_insert_mode (rl_insert_mode ^ 1, 0); - else if (count > 0) - _rl_set_insert_mode (RL_IM_OVERWRITE, 0); - else - _rl_set_insert_mode (RL_IM_INSERT, 0); - - return 0; -} diff --git a/readline/nls.c b/readline/nls.c deleted file mode 100644 index d2f67e0d3e..0000000000 --- a/readline/nls.c +++ /dev/null @@ -1,290 +0,0 @@ -/* nls.c -- skeletal internationalization code. */ - -/* Copyright (C) 1996-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_LOCALE_H) -# include -#endif - -#if defined (HAVE_LANGINFO_CODESET) -# include -#endif - -#include - -#include "rldefs.h" -#include "readline.h" -#include "rlshell.h" -#include "rlprivate.h" - -static int utf8locale PARAMS((char *)); - -#if !defined (HAVE_SETLOCALE) -/* A list of legal values for the LANG or LC_CTYPE environment variables. - If a locale name in this list is the value for the LC_ALL, LC_CTYPE, - or LANG environment variable (using the first of those with a value), - readline eight-bit mode is enabled. */ -static char *legal_lang_values[] = -{ - "iso88591", - "iso88592", - "iso88593", - "iso88594", - "iso88595", - "iso88596", - "iso88597", - "iso88598", - "iso88599", - "iso885910", - "koi8r", - "utf8", - 0 -}; - -static char *normalize_codeset PARAMS((char *)); -#endif /* !HAVE_SETLOCALE */ - -static char *find_codeset PARAMS((char *, size_t *)); - -static char *_rl_get_locale_var PARAMS((const char *)); - -static char * -_rl_get_locale_var (const char *v) -{ - char *lspec; - - lspec = sh_get_env_value ("LC_ALL"); - if (lspec == 0 || *lspec == 0) - lspec = sh_get_env_value (v); - if (lspec == 0 || *lspec == 0) - lspec = sh_get_env_value ("LANG"); - - return lspec; -} - -static int -utf8locale (char *lspec) -{ - char *cp; - size_t len; - -#if HAVE_LANGINFO_CODESET - cp = nl_langinfo (CODESET); - return (STREQ (cp, "UTF-8") || STREQ (cp, "utf8")); -#else - cp = find_codeset (lspec, &len); - - if (cp == 0 || len < 4 || len > 5) - return 0; - return ((len == 5) ? strncmp (cp, "UTF-8", len) == 0 : strncmp (cp, "utf8", 4) == 0); -#endif -} - -/* Query the right environment variables and call setlocale() to initialize - the C library locale settings. */ -char * -_rl_init_locale (void) -{ - char *ret, *lspec; - - /* Set the LC_CTYPE locale category from environment variables. */ - lspec = _rl_get_locale_var ("LC_CTYPE"); - /* Since _rl_get_locale_var queries the right environment variables, - we query the current locale settings with setlocale(), and, if - that doesn't return anything, we set lspec to the empty string to - force the subsequent call to setlocale() to define the `native' - environment. */ - if (lspec == 0 || *lspec == 0) - lspec = setlocale (LC_CTYPE, (char *)NULL); - if (lspec == 0) - lspec = ""; - ret = setlocale (LC_CTYPE, lspec); /* ok, since it does not change locale */ - - _rl_utf8locale = (ret && *ret) ? utf8locale (ret) : 0; - - return ret; -} - -/* Check for LC_ALL, LC_CTYPE, and LANG and use the first with a value - to decide the defaults for 8-bit character input and output. Returns - 1 if we set eight-bit mode. */ -int -_rl_init_eightbit (void) -{ -/* If we have setlocale(3), just check the current LC_CTYPE category - value, and go into eight-bit mode if it's not C or POSIX. */ -#if defined (HAVE_SETLOCALE) - char *lspec, *t; - - t = _rl_init_locale (); /* returns static pointer */ - - if (t && *t && (t[0] != 'C' || t[1]) && (STREQ (t, "POSIX") == 0)) - { - _rl_meta_flag = 1; - _rl_convert_meta_chars_to_ascii = 0; - _rl_output_meta_chars = 1; - return (1); - } - else - return (0); - -#else /* !HAVE_SETLOCALE */ - char *lspec, *t; - int i; - - /* We don't have setlocale. Finesse it. Check the environment for the - appropriate variables and set eight-bit mode if they have the right - values. */ - lspec = _rl_get_locale_var ("LC_CTYPE"); - - if (lspec == 0 || (t = normalize_codeset (lspec)) == 0) - return (0); - for (i = 0; t && legal_lang_values[i]; i++) - if (STREQ (t, legal_lang_values[i])) - { - _rl_meta_flag = 1; - _rl_convert_meta_chars_to_ascii = 0; - _rl_output_meta_chars = 1; - break; - } - - _rl_utf8locale = *t ? STREQ (t, "utf8") : 0; - - xfree (t); - return (legal_lang_values[i] ? 1 : 0); -#endif /* !HAVE_SETLOCALE */ -} - -#if !defined (HAVE_SETLOCALE) -static char * -normalize_codeset (char *codeset) -{ - size_t namelen, i; - int len, all_digits; - char *wp, *retval; - - codeset = find_codeset (codeset, &namelen); - - if (codeset == 0) - return (codeset); - - all_digits = 1; - for (len = 0, i = 0; i < namelen; i++) - { - if (ISALNUM ((unsigned char)codeset[i])) - { - len++; - all_digits &= _rl_digit_p (codeset[i]); - } - } - - retval = (char *)malloc ((all_digits ? 3 : 0) + len + 1); - if (retval == 0) - return ((char *)0); - - wp = retval; - /* Add `iso' to beginning of an all-digit codeset */ - if (all_digits) - { - *wp++ = 'i'; - *wp++ = 's'; - *wp++ = 'o'; - } - - for (i = 0; i < namelen; i++) - if (ISALPHA ((unsigned char)codeset[i])) - *wp++ = _rl_to_lower (codeset[i]); - else if (_rl_digit_p (codeset[i])) - *wp++ = codeset[i]; - *wp = '\0'; - - return retval; -} -#endif /* !HAVE_SETLOCALE */ - -/* Isolate codeset portion of locale specification. */ -static char * -find_codeset (char *name, size_t *lenp) -{ - char *cp, *language, *result; - - cp = language = name; - result = (char *)0; - - while (*cp && *cp != '_' && *cp != '@' && *cp != '+' && *cp != ',') - cp++; - - /* This does not make sense: language has to be specified. As - an exception we allow the variable to contain only the codeset - name. Perhaps there are funny codeset names. */ - if (language == cp) - { - *lenp = strlen (language); - result = language; - } - else - { - /* Next is the territory. */ - if (*cp == '_') - do - ++cp; - while (*cp && *cp != '.' && *cp != '@' && *cp != '+' && *cp != ',' && *cp != '_'); - - /* Now, finally, is the codeset. */ - result = cp; - if (*cp == '.') - do - ++cp; - while (*cp && *cp != '@'); - - if (cp - result > 2) - { - result++; - *lenp = cp - result; - } - else - { - *lenp = strlen (language); - result = language; - } - } - - return result; -} diff --git a/readline/parens.c b/readline/parens.c deleted file mode 100644 index af47977362..0000000000 --- a/readline/parens.c +++ /dev/null @@ -1,180 +0,0 @@ -/* parens.c -- implementation of matching parentheses feature. */ - -/* Copyright (C) 1987, 1989, 1992-2015, 2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (__TANDEM) -# include -#endif - -#include "rlconf.h" - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif - -#include "posixselect.h" - -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -#if !defined (strchr) && !defined (__STDC__) -extern char *strchr (), *strrchr (); -#endif /* !strchr && !__STDC__ */ - -#include "readline.h" -#include "rlprivate.h" - -static int find_matching_open PARAMS((char *, int, int)); - -/* Non-zero means try to blink the matching open parenthesis when the - close parenthesis is inserted. */ -int rl_blink_matching_paren = 0; - -static int _paren_blink_usec = 500000; - -/* Change emacs_standard_keymap to have bindings for paren matching when - ON_OR_OFF is 1, change them back to self_insert when ON_OR_OFF == 0. */ -void -_rl_enable_paren_matching (int on_or_off) -{ - if (on_or_off) - { - /* ([{ */ - rl_bind_key_in_map (')', rl_insert_close, emacs_standard_keymap); - rl_bind_key_in_map (']', rl_insert_close, emacs_standard_keymap); - rl_bind_key_in_map ('}', rl_insert_close, emacs_standard_keymap); - -#if defined (VI_MODE) - /* ([{ */ - rl_bind_key_in_map (')', rl_insert_close, vi_insertion_keymap); - rl_bind_key_in_map (']', rl_insert_close, vi_insertion_keymap); - rl_bind_key_in_map ('}', rl_insert_close, vi_insertion_keymap); -#endif - } - else - { - /* ([{ */ - rl_bind_key_in_map (')', rl_insert, emacs_standard_keymap); - rl_bind_key_in_map (']', rl_insert, emacs_standard_keymap); - rl_bind_key_in_map ('}', rl_insert, emacs_standard_keymap); - -#if defined (VI_MODE) - /* ([{ */ - rl_bind_key_in_map (')', rl_insert, vi_insertion_keymap); - rl_bind_key_in_map (']', rl_insert, vi_insertion_keymap); - rl_bind_key_in_map ('}', rl_insert, vi_insertion_keymap); -#endif - } -} - -int -rl_set_paren_blink_timeout (int u) -{ - int o; - - o = _paren_blink_usec; - if (u > 0) - _paren_blink_usec = u; - return (o); -} - -int -rl_insert_close (int count, int invoking_key) -{ - if (rl_explicit_arg || !rl_blink_matching_paren) - _rl_insert_char (count, invoking_key); - else - { -#if defined (HAVE_SELECT) - int orig_point, match_point, ready; - struct timeval timer; - fd_set readfds; - - _rl_insert_char (1, invoking_key); - (*rl_redisplay_function) (); - match_point = - find_matching_open (rl_line_buffer, rl_point - 2, invoking_key); - - /* Emacs might message or ring the bell here, but I don't. */ - if (match_point < 0) - return 1; - - FD_ZERO (&readfds); - FD_SET (fileno (rl_instream), &readfds); - USEC_TO_TIMEVAL (_paren_blink_usec, timer); - - orig_point = rl_point; - rl_point = match_point; - (*rl_redisplay_function) (); - ready = select (1, &readfds, (fd_set *)NULL, (fd_set *)NULL, &timer); - rl_point = orig_point; -#else /* !HAVE_SELECT */ - _rl_insert_char (count, invoking_key); -#endif /* !HAVE_SELECT */ - } - return 0; -} - -static int -find_matching_open (char *string, int from, int closer) -{ - register int i; - int opener, level, delimiter; - - switch (closer) - { - case ']': opener = '['; break; - case '}': opener = '{'; break; - case ')': opener = '('; break; - default: - return (-1); - } - - level = 1; /* The closer passed in counts as 1. */ - delimiter = 0; /* Delimited state unknown. */ - - for (i = from; i > -1; i--) - { - if (delimiter && (string[i] == delimiter)) - delimiter = 0; - else if (rl_basic_quote_characters && strchr (rl_basic_quote_characters, string[i])) - delimiter = string[i]; - else if (!delimiter && (string[i] == closer)) - level++; - else if (!delimiter && (string[i] == opener)) - level--; - - if (!level) - break; - } - return (i); -} diff --git a/readline/parse-colors.c b/readline/parse-colors.c deleted file mode 100644 index 05ec9bc36a..0000000000 --- a/readline/parse-colors.c +++ /dev/null @@ -1,440 +0,0 @@ -/* `dir', `vdir' and `ls' directory listing programs for GNU. - - Modified by Chet Ramey for Readline. - - Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2017 - Free Software Foundation, Inc. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* Written by Richard Stallman and David MacKenzie. */ - -/* Color support by Peter Anvin and Dennis - Flaherty based on original patches by - Greg Lee . */ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -// strdup() / strcpy() -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -// abort() -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include "rldefs.h" // STREQ, savestring -#include "readline.h" -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -#include "colors.h" -#include "parse-colors.h" - -#if defined (COLOR_SUPPORT) - -static bool get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count); - -struct bin_str _rl_color_indicator[] = - { - { LEN_STR_PAIR ("\033[") }, // lc: Left of color sequence - { LEN_STR_PAIR ("m") }, // rc: Right of color sequence - { 0, NULL }, // ec: End color (replaces lc+no+rc) - { LEN_STR_PAIR ("0") }, // rs: Reset to ordinary colors - { 0, NULL }, // no: Normal - { 0, NULL }, // fi: File: default - { LEN_STR_PAIR ("01;34") }, // di: Directory: bright blue - { LEN_STR_PAIR ("01;36") }, // ln: Symlink: bright cyan - { LEN_STR_PAIR ("33") }, // pi: Pipe: yellow/brown - { LEN_STR_PAIR ("01;35") }, // so: Socket: bright magenta - { LEN_STR_PAIR ("01;33") }, // bd: Block device: bright yellow - { LEN_STR_PAIR ("01;33") }, // cd: Char device: bright yellow - { 0, NULL }, // mi: Missing file: undefined - { 0, NULL }, // or: Orphaned symlink: undefined - { LEN_STR_PAIR ("01;32") }, // ex: Executable: bright green - { LEN_STR_PAIR ("01;35") }, // do: Door: bright magenta - { LEN_STR_PAIR ("37;41") }, // su: setuid: white on red - { LEN_STR_PAIR ("30;43") }, // sg: setgid: black on yellow - { LEN_STR_PAIR ("37;44") }, // st: sticky: black on blue - { LEN_STR_PAIR ("34;42") }, // ow: other-writable: blue on green - { LEN_STR_PAIR ("30;42") }, // tw: ow w/ sticky: black on green - { LEN_STR_PAIR ("30;41") }, // ca: black on red - { 0, NULL }, // mh: disabled by default - { LEN_STR_PAIR ("\033[K") }, // cl: clear to end of line - }; - -/* Parse a string as part of the LS_COLORS variable; this may involve - decoding all kinds of escape characters. If equals_end is set an - unescaped equal sign ends the string, otherwise only a : or \0 - does. Set *OUTPUT_COUNT to the number of bytes output. Return - true if successful. - - The resulting string is *not* null-terminated, but may contain - embedded nulls. - - Note that both dest and src are char **; on return they point to - the first free byte after the array and the character that ended - the input string, respectively. */ - -static bool -get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count) { - char num; /* For numerical codes */ - size_t count; /* Something to count with */ - enum { - ST_GND, ST_BACKSLASH, ST_OCTAL, ST_HEX, ST_CARET, ST_END, ST_ERROR - } state; - const char *p; - char *q; - - p = *src; /* We don't want to double-indirect */ - q = *dest; /* the whole darn time. */ - - count = 0; /* No characters counted in yet. */ - num = 0; - - state = ST_GND; /* Start in ground state. */ - while (state < ST_END) - { - switch (state) - { - case ST_GND: /* Ground state (no escapes) */ - switch (*p) - { - case ':': - case '\0': - state = ST_END; /* End of string */ - break; - case '\\': - state = ST_BACKSLASH; /* Backslash scape sequence */ - ++p; - break; - case '^': - state = ST_CARET; /* Caret escape */ - ++p; - break; - case '=': - if (equals_end) - { - state = ST_END; /* End */ - break; - } - /* else fall through */ - default: - *(q++) = *(p++); - ++count; - break; - } - break; - - case ST_BACKSLASH: /* Backslash escaped character */ - switch (*p) - { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - state = ST_OCTAL; /* Octal sequence */ - num = *p - '0'; - break; - case 'x': - case 'X': - state = ST_HEX; /* Hex sequence */ - num = 0; - break; - case 'a': /* Bell */ - num = '\a'; - break; - case 'b': /* Backspace */ - num = '\b'; - break; - case 'e': /* Escape */ - num = 27; - break; - case 'f': /* Form feed */ - num = '\f'; - break; - case 'n': /* Newline */ - num = '\n'; - break; - case 'r': /* Carriage return */ - num = '\r'; - break; - case 't': /* Tab */ - num = '\t'; - break; - case 'v': /* Vtab */ - num = '\v'; - break; - case '?': /* Delete */ - num = 127; - break; - case '_': /* Space */ - num = ' '; - break; - case '\0': /* End of string */ - state = ST_ERROR; /* Error! */ - break; - default: /* Escaped character like \ ^ : = */ - num = *p; - break; - } - if (state == ST_BACKSLASH) - { - *(q++) = num; - ++count; - state = ST_GND; - } - ++p; - break; - - case ST_OCTAL: /* Octal sequence */ - if (*p < '0' || *p > '7') - { - *(q++) = num; - ++count; - state = ST_GND; - } - else - num = (num << 3) + (*(p++) - '0'); - break; - - case ST_HEX: /* Hex sequence */ - switch (*p) - { - case '0': - case '1': - case '2': - case '3': - case '4': - case '5': - case '6': - case '7': - case '8': - case '9': - num = (num << 4) + (*(p++) - '0'); - break; - case 'a': - case 'b': - case 'c': - case 'd': - case 'e': - case 'f': - num = (num << 4) + (*(p++) - 'a') + 10; - break; - case 'A': - case 'B': - case 'C': - case 'D': - case 'E': - case 'F': - num = (num << 4) + (*(p++) - 'A') + 10; - break; - default: - *(q++) = num; - ++count; - state = ST_GND; - break; - } - break; - - case ST_CARET: /* Caret escape */ - state = ST_GND; /* Should be the next state... */ - if (*p >= '@' && *p <= '~') - { - *(q++) = *(p++) & 037; - ++count; - } - else if (*p == '?') - { - *(q++) = 127; - ++count; - } - else - state = ST_ERROR; - break; - - default: - /* should we ? */ - /* abort (); no, we should not */ - state = ST_ERROR; - break; - } - } - - *dest = q; - *src = p; - *output_count = count; - - return state != ST_ERROR; -} -#endif /* COLOR_SUPPORT */ - -void _rl_parse_colors(void) -{ -#if defined (COLOR_SUPPORT) - const char *p; /* Pointer to character being parsed */ - char *buf; /* color_buf buffer pointer */ - int state; /* State of parser */ - int ind_no; /* Indicator number */ - char label[3]; /* Indicator label */ - COLOR_EXT_TYPE *ext; /* Extension we are working on */ - - p = sh_get_env_value ("LS_COLORS"); - if (p == 0 || *p == '\0') - { - _rl_color_ext_list = NULL; - return; - } - - ext = NULL; - strcpy (label, "??"); - - /* This is an overly conservative estimate, but any possible - LS_COLORS string will *not* generate a color_buf longer than - itself, so it is a safe way of allocating a buffer in - advance. */ - buf = color_buf = savestring (p); - - state = 1; - while (state > 0) - { - switch (state) - { - case 1: /* First label character */ - switch (*p) - { - case ':': - ++p; - break; - - case '*': - /* Allocate new extension block and add to head of - linked list (this way a later definition will - override an earlier one, which can be useful for - having terminal-specific defs override global). */ - - ext = (COLOR_EXT_TYPE *)xmalloc (sizeof *ext); - ext->next = _rl_color_ext_list; - _rl_color_ext_list = ext; - - ++p; - ext->ext.string = buf; - - state = (get_funky_string (&buf, &p, true, &ext->ext.len) - ? 4 : -1); - break; - - case '\0': - state = 0; /* Done! */ - break; - - default: /* Assume it is file type label */ - label[0] = *(p++); - state = 2; - break; - } - break; - - case 2: /* Second label character */ - if (*p) - { - label[1] = *(p++); - state = 3; - } - else - state = -1; /* Error */ - break; - - case 3: /* Equal sign after indicator label */ - state = -1; /* Assume failure... */ - if (*(p++) == '=')/* It *should* be... */ - { - for (ind_no = 0; indicator_name[ind_no] != NULL; ++ind_no) - { - if (STREQ (label, indicator_name[ind_no])) - { - _rl_color_indicator[ind_no].string = buf; - state = (get_funky_string (&buf, &p, false, - &_rl_color_indicator[ind_no].len) - ? 1 : -1); - break; - } - } - if (state == -1) - { - _rl_errmsg ("LS_COLORS: unrecognized prefix: %s", label); - /* recover from an unrecognized prefix */ - while (p && *p && *p != ':') - p++; - if (p && *p == ':') - state = 1; - else if (p && *p == 0) - state = 0; - } - } - break; - - case 4: /* Equal sign after *.ext */ - if (*(p++) == '=') - { - ext->seq.string = buf; - state = (get_funky_string (&buf, &p, false, &ext->seq.len) - ? 1 : -1); - } - else - state = -1; - /* XXX - recover here as with an unrecognized prefix? */ - if (state == -1 && ext->ext.string) - _rl_errmsg ("LS_COLORS: syntax error: %s", ext->ext.string); - break; - } - } - - if (state < 0) - { - COLOR_EXT_TYPE *e; - COLOR_EXT_TYPE *e2; - - _rl_errmsg ("unparsable value for LS_COLORS environment variable"); - free (color_buf); - for (e = _rl_color_ext_list; e != NULL; /* empty */) - { - e2 = e; - e = e->next; - free (e2); - } - _rl_color_ext_list = NULL; - _rl_colored_stats = 0; /* can't have colored stats without colors */ - } -#else /* !COLOR_SUPPORT */ - ; -#endif /* !COLOR_SUPPORT */ -} diff --git a/readline/parse-colors.h b/readline/parse-colors.h deleted file mode 100644 index aef86f784d..0000000000 --- a/readline/parse-colors.h +++ /dev/null @@ -1,46 +0,0 @@ -/* `dir', `vdir' and `ls' directory listing programs for GNU. - - Modified by Chet Ramey for Readline. - - Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012 Free Software Foundation, - Inc. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . */ - -/* Written by Richard Stallman and David MacKenzie. */ - -/* Color support by Peter Anvin and Dennis - Flaherty based on original patches by - Greg Lee . */ - -#ifndef _PARSE_COLORS_H_ -#define _PARSE_COLORS_H_ - -#include "readline.h" - -#define LEN_STR_PAIR(s) sizeof (s) - 1, s - -void _rl_parse_colors (void); - -static const char *const indicator_name[]= - { - "lc", "rc", "ec", "rs", "no", "fi", "di", "ln", "pi", "so", - "bd", "cd", "mi", "or", "ex", "do", "su", "sg", "st", - "ow", "tw", "ca", "mh", "cl", NULL - }; - -/* Buffer for color sequences */ -static char *color_buf; - -#endif /* !_PARSE_COLORS_H_ */ diff --git a/readline/patchlevel b/readline/patchlevel deleted file mode 100644 index d8c9df7e6b..0000000000 --- a/readline/patchlevel +++ /dev/null @@ -1,3 +0,0 @@ -# Do not edit -- exists only for use by patch - -0 diff --git a/readline/posixdir.h b/readline/posixdir.h deleted file mode 100644 index 0921c5d752..0000000000 --- a/readline/posixdir.h +++ /dev/null @@ -1,71 +0,0 @@ -/* posixdir.h -- Posix directory reading includes and defines. */ - -/* Copyright (C) 1987,1991,2012 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Bash is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Bash. If not, see . -*/ - -/* This file should be included instead of or . */ - -#if !defined (_POSIXDIR_H_) -#define _POSIXDIR_H_ - -#if defined (HAVE_DIRENT_H) -# include -# if defined (HAVE_STRUCT_DIRENT_D_NAMLEN) -# define D_NAMLEN(d) ((d)->d_namlen) -# else -# define D_NAMLEN(d) (strlen ((d)->d_name)) -# endif /* !HAVE_STRUCT_DIRENT_D_NAMLEN */ -#else -# if defined (HAVE_SYS_NDIR_H) -# include -# endif -# if defined (HAVE_SYS_DIR_H) -# include -# endif -# if defined (HAVE_NDIR_H) -# include -# endif -# if !defined (dirent) -# define dirent direct -# endif /* !dirent */ -# define D_NAMLEN(d) ((d)->d_namlen) -#endif /* !HAVE_DIRENT_H */ - -/* The bash code fairly consistenly uses d_fileno; make sure it's available */ -#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (HAVE_STRUCT_DIRENT_D_FILENO) -# define d_fileno d_ino -#endif - -/* Posix does not require that the d_ino field be present, and some - systems do not provide it. */ -#if !defined (HAVE_STRUCT_DIRENT_D_INO) || defined (BROKEN_DIRENT_D_INO) -# define REAL_DIR_ENTRY(dp) 1 -#else -# define REAL_DIR_ENTRY(dp) (dp->d_ino != 0) -#endif /* _POSIX_SOURCE */ - -#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (BROKEN_DIRENT_D_INO) -# define D_INO_AVAILABLE -#endif - -/* Signal the rest of the code that it can safely use dirent.d_fileno */ -#if defined (D_INO_AVAILABLE) || defined (HAVE_STRUCT_DIRENT_D_FILENO) -# define D_FILENO_AVAILABLE 1 -#endif - -#endif /* !_POSIXDIR_H_ */ diff --git a/readline/posixjmp.h b/readline/posixjmp.h deleted file mode 100644 index 9c7e99ed42..0000000000 --- a/readline/posixjmp.h +++ /dev/null @@ -1,46 +0,0 @@ -/* posixjmp.h -- wrapper for setjmp.h with changes for POSIX systems. */ - -/* Copyright (C) 1987,1991-2015 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Bash is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Bash. If not, see . -*/ - -#ifndef _POSIXJMP_H_ -#define _POSIXJMP_H_ - -#include - -/* This *must* be included *after* config.h */ - -#if defined (HAVE_POSIX_SIGSETJMP) -# define procenv_t sigjmp_buf - -# define setjmp_nosigs(x) sigsetjmp((x), 0) -# define setjmp_sigs(x) sigsetjmp((x), 1) - -# define _rl_longjmp(x, n) siglongjmp((x), (n)) -# define sh_longjmp(x, n) siglongjmp((x), (n)) -#else -# define procenv_t jmp_buf - -# define setjmp_nosigs setjmp -# define setjmp_sigs setjmp - -# define _rl_longjmp(x, n) longjmp((x), (n)) -# define sh_longjmp(x, n) longjmp((x), (n)) -#endif - -#endif /* _POSIXJMP_H_ */ diff --git a/readline/posixselect.h b/readline/posixselect.h deleted file mode 100644 index da6a1ace0c..0000000000 --- a/readline/posixselect.h +++ /dev/null @@ -1,47 +0,0 @@ -/* posixselect.h -- wrapper for select(2) includes and definitions */ - -/* Copyright (C) 2009 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Bash is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Bash. If not, see . -*/ - -#ifndef _POSIXSELECT_H_ -#define _POSIXSELECT_H_ - -#if defined (FD_SET) && !defined (HAVE_SELECT) -# define HAVE_SELECT 1 -#endif - -#if defined (HAVE_SELECT) -# if !defined (HAVE_SYS_SELECT_H) || !defined (M_UNIX) -# include -# endif -#endif /* HAVE_SELECT */ -#if defined (HAVE_SYS_SELECT_H) -# include -#endif - -#ifndef USEC_PER_SEC -# define USEC_PER_SEC 1000000 -#endif - -#define USEC_TO_TIMEVAL(us, tv) \ -do { \ - (tv).tv_sec = (us) / USEC_PER_SEC; \ - (tv).tv_usec = (us) % USEC_PER_SEC; \ -} while (0) - -#endif /* _POSIXSELECT_H_ */ diff --git a/readline/posixstat.h b/readline/posixstat.h deleted file mode 100644 index 3eb7f2906f..0000000000 --- a/readline/posixstat.h +++ /dev/null @@ -1,142 +0,0 @@ -/* posixstat.h -- Posix stat(2) definitions for systems that - don't have them. */ - -/* Copyright (C) 1987,1991 Free Software Foundation, Inc. - - This file is part of GNU Bash, the Bourne Again SHell. - - Bash is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Bash is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Bash. If not, see . -*/ - -/* This file should be included instead of . - It relies on the local sys/stat.h to work though. */ -#if !defined (_POSIXSTAT_H_) -#define _POSIXSTAT_H_ - -#include - -#if defined (STAT_MACROS_BROKEN) -# undef S_ISBLK -# undef S_ISCHR -# undef S_ISDIR -# undef S_ISFIFO -# undef S_ISREG -# undef S_ISLNK -#endif /* STAT_MACROS_BROKEN */ - -/* These are guaranteed to work only on isc386 */ -#if !defined (S_IFDIR) && !defined (S_ISDIR) -# define S_IFDIR 0040000 -#endif /* !S_IFDIR && !S_ISDIR */ -#if !defined (S_IFMT) -# define S_IFMT 0170000 -#endif /* !S_IFMT */ - -/* Posix 1003.1 5.6.1.1 file types */ - -/* Some Posix-wannabe systems define _S_IF* macros instead of S_IF*, but - do not provide the S_IS* macros that Posix requires. */ - -#if defined (_S_IFMT) && !defined (S_IFMT) -#define S_IFMT _S_IFMT -#endif -#if defined (_S_IFIFO) && !defined (S_IFIFO) -#define S_IFIFO _S_IFIFO -#endif -#if defined (_S_IFCHR) && !defined (S_IFCHR) -#define S_IFCHR _S_IFCHR -#endif -#if defined (_S_IFDIR) && !defined (S_IFDIR) -#define S_IFDIR _S_IFDIR -#endif -#if defined (_S_IFBLK) && !defined (S_IFBLK) -#define S_IFBLK _S_IFBLK -#endif -#if defined (_S_IFREG) && !defined (S_IFREG) -#define S_IFREG _S_IFREG -#endif -#if defined (_S_IFLNK) && !defined (S_IFLNK) -#define S_IFLNK _S_IFLNK -#endif -#if defined (_S_IFSOCK) && !defined (S_IFSOCK) -#define S_IFSOCK _S_IFSOCK -#endif - -/* Test for each symbol individually and define the ones necessary (some - systems claiming Posix compatibility define some but not all). */ - -#if defined (S_IFBLK) && !defined (S_ISBLK) -#define S_ISBLK(m) (((m)&S_IFMT) == S_IFBLK) /* block device */ -#endif - -#if defined (S_IFCHR) && !defined (S_ISCHR) -#define S_ISCHR(m) (((m)&S_IFMT) == S_IFCHR) /* character device */ -#endif - -#if defined (S_IFDIR) && !defined (S_ISDIR) -#define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) /* directory */ -#endif - -#if defined (S_IFREG) && !defined (S_ISREG) -#define S_ISREG(m) (((m)&S_IFMT) == S_IFREG) /* file */ -#endif - -#if defined (S_IFIFO) && !defined (S_ISFIFO) -#define S_ISFIFO(m) (((m)&S_IFMT) == S_IFIFO) /* fifo - named pipe */ -#endif - -#if defined (S_IFLNK) && !defined (S_ISLNK) -#define S_ISLNK(m) (((m)&S_IFMT) == S_IFLNK) /* symbolic link */ -#endif - -#if defined (S_IFSOCK) && !defined (S_ISSOCK) -#define S_ISSOCK(m) (((m)&S_IFMT) == S_IFSOCK) /* socket */ -#endif - -/* - * POSIX 1003.1 5.6.1.2 File Modes - */ - -#if !defined (S_IRWXU) -# if !defined (S_IREAD) -# define S_IREAD 00400 -# define S_IWRITE 00200 -# define S_IEXEC 00100 -# endif /* S_IREAD */ - -# if !defined (S_IRUSR) -# define S_IRUSR S_IREAD /* read, owner */ -# define S_IWUSR S_IWRITE /* write, owner */ -# define S_IXUSR S_IEXEC /* execute, owner */ - -# define S_IRGRP (S_IREAD >> 3) /* read, group */ -# define S_IWGRP (S_IWRITE >> 3) /* write, group */ -# define S_IXGRP (S_IEXEC >> 3) /* execute, group */ - -# define S_IROTH (S_IREAD >> 6) /* read, other */ -# define S_IWOTH (S_IWRITE >> 6) /* write, other */ -# define S_IXOTH (S_IEXEC >> 6) /* execute, other */ -# endif /* !S_IRUSR */ - -# define S_IRWXU (S_IRUSR | S_IWUSR | S_IXUSR) -# define S_IRWXG (S_IRGRP | S_IWGRP | S_IXGRP) -# define S_IRWXO (S_IROTH | S_IWOTH | S_IXOTH) -#endif /* !S_IRWXU */ - -/* These are non-standard, but are used in builtins.c$symbolic_umask() */ -#define S_IRUGO (S_IRUSR | S_IRGRP | S_IROTH) -#define S_IWUGO (S_IWUSR | S_IWGRP | S_IWOTH) -#define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) - -#endif /* _POSIXSTAT_H_ */ diff --git a/readline/readline.c b/readline/readline.c deleted file mode 100644 index 678f989c51..0000000000 --- a/readline/readline.c +++ /dev/null @@ -1,1450 +0,0 @@ -/* readline.c -- a general facility for reading lines of input - with emacs style editing and completion. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include "posixstat.h" -#include -#if defined (HAVE_SYS_FILE_H) -# include -#endif /* HAVE_SYS_FILE_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_LOCALE_H) -# include -#endif - -#include -#include "posixjmp.h" -#include - -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -#if defined (__EMX__) -# define INCL_DOSPROCESS -# include -#endif /* __EMX__ */ - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -#ifndef RL_LIBRARY_VERSION -# define RL_LIBRARY_VERSION "5.1" -#endif - -#ifndef RL_READLINE_VERSION -# define RL_READLINE_VERSION 0x0501 -#endif - -extern void _rl_free_history_entry PARAMS((HIST_ENTRY *)); - -#if defined (COLOR_SUPPORT) -extern void _rl_parse_colors PARAMS((void)); /* XXX */ -#endif - - -/* Forward declarations used in this file. */ -static char *readline_internal PARAMS((void)); -static void readline_initialize_everything PARAMS((void)); - -static void bind_arrow_keys_internal PARAMS((Keymap)); -static void bind_arrow_keys PARAMS((void)); - -static void bind_bracketed_paste_prefix PARAMS((void)); - -static void readline_default_bindings PARAMS((void)); -static void reset_default_bindings PARAMS((void)); - -static int _rl_subseq_result PARAMS((int, Keymap, int, int)); -static int _rl_subseq_getchar PARAMS((int)); - -/* **************************************************************** */ -/* */ -/* Line editing input utility */ -/* */ -/* **************************************************************** */ - -const char *rl_library_version = RL_LIBRARY_VERSION; - -int rl_readline_version = RL_READLINE_VERSION; - -/* True if this is `real' readline as opposed to some stub substitute. */ -int rl_gnu_readline_p = 1; - -/* A pointer to the keymap that is currently in use. - By default, it is the standard emacs keymap. */ -Keymap _rl_keymap = emacs_standard_keymap; - -/* The current style of editing. */ -int rl_editing_mode = emacs_mode; - -/* The current insert mode: input (the default) or overwrite */ -int rl_insert_mode = RL_IM_DEFAULT; - -/* Non-zero if we called this function from _rl_dispatch(). It's present - so functions can find out whether they were called from a key binding - or directly from an application. */ -int rl_dispatching; - -/* Non-zero if the previous command was a kill command. */ -int _rl_last_command_was_kill = 0; - -/* The current value of the numeric argument specified by the user. */ -int rl_numeric_arg = 1; - -/* Non-zero if an argument was typed. */ -int rl_explicit_arg = 0; - -/* Temporary value used while generating the argument. */ -int rl_arg_sign = 1; - -/* Non-zero means we have been called at least once before. */ -static int rl_initialized; - -#if 0 -/* If non-zero, this program is running in an EMACS buffer. */ -static int running_in_emacs; -#endif - -/* Flags word encapsulating the current readline state. */ -unsigned long rl_readline_state = RL_STATE_NONE; - -/* The current offset in the current input line. */ -int rl_point; - -/* Mark in the current input line. */ -int rl_mark; - -/* Length of the current input line. */ -int rl_end; - -/* Make this non-zero to return the current input_line. */ -int rl_done; - -/* The last function executed by readline. */ -rl_command_func_t *rl_last_func = (rl_command_func_t *)NULL; - -/* Top level environment for readline_internal (). */ -procenv_t _rl_top_level; - -/* The streams we interact with. */ -FILE *_rl_in_stream, *_rl_out_stream; - -/* The names of the streams that we do input and output to. */ -FILE *rl_instream = (FILE *)NULL; -FILE *rl_outstream = (FILE *)NULL; - -/* Non-zero means echo characters as they are read. Defaults to no echo; - set to 1 if there is a controlling terminal, we can get its attributes, - and the attributes include `echo'. Look at rltty.c:prepare_terminal_settings - for the code that sets it. */ -int _rl_echoing_p = 0; - -/* Current prompt. */ -char *rl_prompt = (char *)NULL; -int rl_visible_prompt_length = 0; - -/* Set to non-zero by calling application if it has already printed rl_prompt - and does not want readline to do it the first time. */ -int rl_already_prompted = 0; - -/* The number of characters read in order to type this complete command. */ -int rl_key_sequence_length = 0; - -/* If non-zero, then this is the address of a function to call just - before readline_internal_setup () prints the first prompt. */ -rl_hook_func_t *rl_startup_hook = (rl_hook_func_t *)NULL; - -/* If non-zero, this is the address of a function to call just before - readline_internal_setup () returns and readline_internal starts - reading input characters. */ -rl_hook_func_t *rl_pre_input_hook = (rl_hook_func_t *)NULL; - -/* What we use internally. You should always refer to RL_LINE_BUFFER. */ -static char *the_line; - -/* The character that can generate an EOF. Really read from - the terminal driver... just defaulted here. */ -int _rl_eof_char = CTRL ('D'); - -/* Non-zero makes this the next keystroke to read. */ -int rl_pending_input = 0; - -/* If non-zero when readline_internal returns, it means we found EOF */ -int _rl_eof_found = 0; - -/* Pointer to a useful terminal name. */ -const char *rl_terminal_name = (const char *)NULL; - -/* Non-zero means to always use horizontal scrolling in line display. */ -int _rl_horizontal_scroll_mode = 0; - -/* Non-zero means to display an asterisk at the starts of history lines - which have been modified. */ -int _rl_mark_modified_lines = 0; - -/* The style of `bell' notification preferred. This can be set to NO_BELL, - AUDIBLE_BELL, or VISIBLE_BELL. */ -int _rl_bell_preference = AUDIBLE_BELL; - -/* String inserted into the line by rl_insert_comment (). */ -char *_rl_comment_begin; - -/* Keymap holding the function currently being executed. */ -Keymap rl_executing_keymap; - -/* Keymap we're currently using to dispatch. */ -Keymap _rl_dispatching_keymap; - -/* Non-zero means to erase entire line, including prompt, on empty input lines. */ -int rl_erase_empty_line = 0; - -/* Non-zero means to read only this many characters rather than up to a - character bound to accept-line. */ -int rl_num_chars_to_read = 0; - -/* Line buffer and maintenance. */ -char *rl_line_buffer = (char *)NULL; -int rl_line_buffer_len = 0; - -/* Key sequence `contexts' */ -_rl_keyseq_cxt *_rl_kscxt = 0; - -int rl_executing_key; -char *rl_executing_keyseq = 0; -int _rl_executing_keyseq_size = 0; - -/* Timeout (specified in milliseconds) when reading characters making up an - ambiguous multiple-key sequence */ -int _rl_keyseq_timeout = 500; - -#define RESIZE_KEYSEQ_BUFFER() \ - do \ - { \ - if (rl_key_sequence_length + 2 >= _rl_executing_keyseq_size) \ - { \ - _rl_executing_keyseq_size += 16; \ - rl_executing_keyseq = xrealloc (rl_executing_keyseq, _rl_executing_keyseq_size); \ - } \ - } \ - while (0); - -/* Forward declarations used by the display, termcap, and history code. */ - -/* **************************************************************** */ -/* */ -/* `Forward' declarations */ -/* */ -/* **************************************************************** */ - -/* Non-zero means do not parse any lines other than comments and - parser directives. */ -unsigned char _rl_parsing_conditionalized_out = 0; - -/* Non-zero means to convert characters with the meta bit set to - escape-prefixed characters so we can indirect through - emacs_meta_keymap or vi_escape_keymap. */ -int _rl_convert_meta_chars_to_ascii = 1; - -/* Non-zero means to output characters with the meta bit set directly - rather than as a meta-prefixed escape sequence. */ -int _rl_output_meta_chars = 0; - -/* Non-zero means to look at the termios special characters and bind - them to equivalent readline functions at startup. */ -int _rl_bind_stty_chars = 1; - -/* Non-zero means to go through the history list at every newline (or - whenever rl_done is set and readline returns) and revert each line to - its initial state. */ -int _rl_revert_all_at_newline = 0; - -/* Non-zero means to honor the termios ECHOCTL bit and echo control - characters corresponding to keyboard-generated signals. */ -int _rl_echo_control_chars = 1; - -/* Non-zero means to prefix the displayed prompt with a character indicating - the editing mode: @ for emacs, : for vi-command, + for vi-insert. */ -int _rl_show_mode_in_prompt = 0; - -/* Non-zero means to attempt to put the terminal in `bracketed paste mode', - where it will prefix pasted text with an escape sequence and send - another to mark the end of the paste. */ -int _rl_enable_bracketed_paste = 0; - -/* **************************************************************** */ -/* */ -/* Top Level Functions */ -/* */ -/* **************************************************************** */ - -/* Non-zero means treat 0200 bit in terminal input as Meta bit. */ -int _rl_meta_flag = 0; /* Forward declaration */ - -/* Set up the prompt and expand it. Called from readline() and - rl_callback_handler_install (). */ -int -rl_set_prompt (const char *prompt) -{ - FREE (rl_prompt); - rl_prompt = prompt ? savestring (prompt) : (char *)NULL; - rl_display_prompt = rl_prompt ? rl_prompt : ""; - - rl_visible_prompt_length = rl_expand_prompt (rl_prompt); - return 0; -} - -/* Read a line of input. Prompt with PROMPT. An empty PROMPT means - none. A return value of NULL means that EOF was encountered. */ -char * -readline (const char *prompt) -{ - char *value; -#if 0 - int in_callback; -#endif - - /* If we are at EOF return a NULL string. */ - if (rl_pending_input == EOF) - { - rl_clear_pending_input (); - return ((char *)NULL); - } - -#if 0 - /* If readline() is called after installing a callback handler, temporarily - turn off the callback state to avoid ensuing messiness. Patch supplied - by the gdb folks. XXX -- disabled. This can be fooled and readline - left in a strange state by a poorly-timed longjmp. */ - if (in_callback = RL_ISSTATE (RL_STATE_CALLBACK)) - RL_UNSETSTATE (RL_STATE_CALLBACK); -#endif - - rl_set_prompt (prompt); - - rl_initialize (); - if (rl_prep_term_function) - (*rl_prep_term_function) (_rl_meta_flag); - -#if defined (HANDLE_SIGNALS) - rl_set_signals (); -#endif - - value = readline_internal (); - if (rl_deprep_term_function) - (*rl_deprep_term_function) (); - -#if defined (HANDLE_SIGNALS) - rl_clear_signals (); -#endif - -#if 0 - if (in_callback) - RL_SETSTATE (RL_STATE_CALLBACK); -#endif - -#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT) - if (value) - _rl_audit_tty (value); -#endif - - return (value); -} - -#if defined (READLINE_CALLBACKS) -# define STATIC_CALLBACK -#else -# define STATIC_CALLBACK static -#endif - -STATIC_CALLBACK void -readline_internal_setup (void) -{ - char *nprompt; - - _rl_in_stream = rl_instream; - _rl_out_stream = rl_outstream; - - /* Enable the meta key only for the duration of readline(), if this - terminal has one and the terminal has been initialized */ - if (_rl_enable_meta & RL_ISSTATE (RL_STATE_TERMPREPPED)) - _rl_enable_meta_key (); - - if (rl_startup_hook) - (*rl_startup_hook) (); - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - rl_vi_insertion_mode (1, 'i'); /* don't want to reset last */ - else -#endif /* VI_MODE */ - if (_rl_show_mode_in_prompt) - _rl_reset_prompt (); - - /* If we're not echoing, we still want to at least print a prompt, because - rl_redisplay will not do it for us. If the calling application has a - custom redisplay function, though, let that function handle it. */ - if (_rl_echoing_p == 0 && rl_redisplay_function == rl_redisplay) - { - if (rl_prompt && rl_already_prompted == 0) - { - nprompt = _rl_strip_prompt (rl_prompt); - fprintf (_rl_out_stream, "%s", nprompt); - fflush (_rl_out_stream); - xfree (nprompt); - } - } - else - { - if (rl_prompt && rl_already_prompted) - rl_on_new_line_with_prompt (); - else - rl_on_new_line (); - (*rl_redisplay_function) (); - } - - if (rl_pre_input_hook) - (*rl_pre_input_hook) (); - - RL_CHECK_SIGNALS (); -} - -STATIC_CALLBACK char * -readline_internal_teardown (int eof) -{ - char *temp; - HIST_ENTRY *entry; - - RL_CHECK_SIGNALS (); - - /* Restore the original of this history line, iff the line that we - are editing was originally in the history, AND the line has changed. */ - entry = current_history (); - - if (entry && rl_undo_list) - { - temp = savestring (the_line); - rl_revert_line (1, 0); - entry = replace_history_entry (where_history (), the_line, (histdata_t)NULL); - _rl_free_history_entry (entry); - - strcpy (the_line, temp); - xfree (temp); - } - - if (_rl_revert_all_at_newline) - _rl_revert_all_lines (); - - /* At any rate, it is highly likely that this line has an undo list. Get - rid of it now. */ - if (rl_undo_list) - rl_free_undo_list (); - - /* Disable the meta key, if this terminal has one and we were told to use it. - The check whether or not we sent the enable string is in - _rl_disable_meta_key(); the flag is set in _rl_enable_meta_key */ - _rl_disable_meta_key (); - - /* Restore normal cursor, if available. */ - _rl_set_insert_mode (RL_IM_INSERT, 0); - - return (eof ? (char *)NULL : savestring (the_line)); -} - -void -_rl_internal_char_cleanup (void) -{ -#if defined (VI_MODE) - /* In vi mode, when you exit insert mode, the cursor moves back - over the previous character. We explicitly check for that here. */ - if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap) - rl_vi_check (); -#endif /* VI_MODE */ - - if (rl_num_chars_to_read && rl_end >= rl_num_chars_to_read) - { - (*rl_redisplay_function) (); - _rl_want_redisplay = 0; - rl_newline (1, '\n'); - } - - if (rl_done == 0) - { - (*rl_redisplay_function) (); - _rl_want_redisplay = 0; - } - - /* If the application writer has told us to erase the entire line if - the only character typed was something bound to rl_newline, do so. */ - if (rl_erase_empty_line && rl_done && rl_last_func == rl_newline && - rl_point == 0 && rl_end == 0) - _rl_erase_entire_line (); -} - -STATIC_CALLBACK int -#if defined (READLINE_CALLBACKS) -readline_internal_char (void) -#else -readline_internal_charloop (void) -#endif -{ - static int lastc, eof_found; - int c, code, lk, r; - - lastc = EOF; - -#if !defined (READLINE_CALLBACKS) - eof_found = 0; - while (rl_done == 0) - { -#endif - lk = _rl_last_command_was_kill; - -#if defined (HAVE_POSIX_SIGSETJMP) - code = sigsetjmp (_rl_top_level, 0); -#else - code = setjmp (_rl_top_level); -#endif - - if (code) - { - (*rl_redisplay_function) (); - _rl_want_redisplay = 0; - /* If we get here, we're not being called from something dispatched - from _rl_callback_read_char(), which sets up its own value of - _rl_top_level (saving and restoring the old, of course), so - we can just return here. */ - if (RL_ISSTATE (RL_STATE_CALLBACK)) - return (0); - } - - if (rl_pending_input == 0) - { - /* Then initialize the argument and number of keys read. */ - _rl_reset_argument (); - rl_executing_keyseq[rl_key_sequence_length = 0] = '\0'; - } - - RL_SETSTATE(RL_STATE_READCMD); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_READCMD); - - /* look at input.c:rl_getc() for the circumstances under which this will - be returned; punt immediately on read error without converting it to - a newline; assume that rl_read_key has already called the signal - handler. */ - if (c == READERR) - { -#if defined (READLINE_CALLBACKS) - RL_SETSTATE(RL_STATE_DONE); - return (rl_done = 1); -#else - eof_found = 1; - break; -#endif - } - - /* EOF typed to a non-blank line is ^D the first time, EOF the second - time in a row. This won't return any partial line read from the tty. - If we want to change this, to force any existing line to be returned - when read(2) reads EOF, for example, this is the place to change. */ - if (c == EOF && rl_end) - { - if (RL_SIG_RECEIVED ()) - { - RL_CHECK_SIGNALS (); - if (rl_signal_event_hook) - (*rl_signal_event_hook) (); /* XXX */ - } - - /* XXX - reading two consecutive EOFs returns EOF */ - if (RL_ISSTATE (RL_STATE_TERMPREPPED)) - { - if (lastc == _rl_eof_char || lastc == EOF) - rl_end = 0; - else - c = _rl_eof_char; - } - else - c = NEWLINE; - } - - /* The character _rl_eof_char typed to blank line, and not as the - previous character is interpreted as EOF. This doesn't work when - READLINE_CALLBACKS is defined, so hitting a series of ^Ds will - erase all the chars on the line and then return EOF. */ - if (((c == _rl_eof_char && lastc != c) || c == EOF) && rl_end == 0) - { -#if defined (READLINE_CALLBACKS) - RL_SETSTATE(RL_STATE_DONE); - return (rl_done = 1); -#else - eof_found = 1; - break; -#endif - } - - lastc = c; - r = _rl_dispatch ((unsigned char)c, _rl_keymap); - RL_CHECK_SIGNALS (); - - /* If there was no change in _rl_last_command_was_kill, then no kill - has taken place. Note that if input is pending we are reading - a prefix command, so nothing has changed yet. */ - if (rl_pending_input == 0 && lk == _rl_last_command_was_kill) - _rl_last_command_was_kill = 0; - - _rl_internal_char_cleanup (); - -#if defined (READLINE_CALLBACKS) - return 0; -#else - } - - return (eof_found); -#endif -} - -#if defined (READLINE_CALLBACKS) -static int -readline_internal_charloop (void) -{ - int eof = 1; - - while (rl_done == 0) - eof = readline_internal_char (); - return (eof); -} -#endif /* READLINE_CALLBACKS */ - -/* Read a line of input from the global rl_instream, doing output on - the global rl_outstream. - If rl_prompt is non-null, then that is our prompt. */ -static char * -readline_internal (void) -{ - readline_internal_setup (); - _rl_eof_found = readline_internal_charloop (); - return (readline_internal_teardown (_rl_eof_found)); -} - -void -_rl_init_line_state (void) -{ - rl_point = rl_end = rl_mark = 0; - the_line = rl_line_buffer; - the_line[0] = 0; -} - -void -_rl_set_the_line (void) -{ - the_line = rl_line_buffer; -} - -#if defined (READLINE_CALLBACKS) -_rl_keyseq_cxt * -_rl_keyseq_cxt_alloc (void) -{ - _rl_keyseq_cxt *cxt; - - cxt = (_rl_keyseq_cxt *)xmalloc (sizeof (_rl_keyseq_cxt)); - - cxt->flags = cxt->subseq_arg = cxt->subseq_retval = 0; - - cxt->okey = 0; - cxt->ocxt = _rl_kscxt; - cxt->childval = 42; /* sentinel value */ - - return cxt; -} - -void -_rl_keyseq_cxt_dispose (_rl_keyseq_cxt *cxt) -{ - xfree (cxt); -} - -void -_rl_keyseq_chain_dispose (void) -{ - _rl_keyseq_cxt *cxt; - - while (_rl_kscxt) - { - cxt = _rl_kscxt; - _rl_kscxt = _rl_kscxt->ocxt; - _rl_keyseq_cxt_dispose (cxt); - } -} -#endif - -static int -_rl_subseq_getchar (int key) -{ - int k; - - if (key == ESC) - RL_SETSTATE(RL_STATE_METANEXT); - RL_SETSTATE(RL_STATE_MOREINPUT); - k = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - if (key == ESC) - RL_UNSETSTATE(RL_STATE_METANEXT); - - return k; -} - -#if defined (READLINE_CALLBACKS) -int -_rl_dispatch_callback (_rl_keyseq_cxt *cxt) -{ - int nkey, r; - - /* For now */ - /* The first time this context is used, we want to read input and dispatch - on it. When traversing the chain of contexts back `up', we want to use - the value from the next context down. We're simulating recursion using - a chain of contexts. */ - if ((cxt->flags & KSEQ_DISPATCHED) == 0) - { - nkey = _rl_subseq_getchar (cxt->okey); - if (nkey < 0) - { - _rl_abort_internal (); - return -1; - } - r = _rl_dispatch_subseq (nkey, cxt->dmap, cxt->subseq_arg); - cxt->flags |= KSEQ_DISPATCHED; - } - else - r = cxt->childval; - - /* For now */ - if (r != -3) /* don't do this if we indicate there will be other matches */ - r = _rl_subseq_result (r, cxt->oldmap, cxt->okey, (cxt->flags & KSEQ_SUBSEQ)); - - RL_CHECK_SIGNALS (); - /* We only treat values < 0 specially to simulate recursion. */ - if (r >= 0 || (r == -1 && (cxt->flags & KSEQ_SUBSEQ) == 0)) /* success! or failure! */ - { - _rl_keyseq_chain_dispose (); - RL_UNSETSTATE (RL_STATE_MULTIKEY); - return r; - } - - if (r != -3) /* magic value that says we added to the chain */ - _rl_kscxt = cxt->ocxt; - if (_rl_kscxt) - _rl_kscxt->childval = r; - if (r != -3) - _rl_keyseq_cxt_dispose (cxt); - - return r; -} -#endif /* READLINE_CALLBACKS */ - -/* Do the command associated with KEY in MAP. - If the associated command is really a keymap, then read - another key, and dispatch into that map. */ -int -_rl_dispatch (register int key, Keymap map) -{ - _rl_dispatching_keymap = map; - return _rl_dispatch_subseq (key, map, 0); -} - -int -_rl_dispatch_subseq (register int key, Keymap map, int got_subseq) -{ - int r, newkey; - char *macro; - rl_command_func_t *func; -#if defined (READLINE_CALLBACKS) - _rl_keyseq_cxt *cxt; -#endif - - if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) - { - if (map[ESC].type == ISKMAP) - { - if (RL_ISSTATE (RL_STATE_MACRODEF)) - _rl_add_macro_char (ESC); - RESIZE_KEYSEQ_BUFFER (); - rl_executing_keyseq[rl_key_sequence_length++] = ESC; - map = FUNCTION_TO_KEYMAP (map, ESC); - key = UNMETA (key); - return (_rl_dispatch (key, map)); - } - else - rl_ding (); - return 0; - } - - if (RL_ISSTATE (RL_STATE_MACRODEF)) - _rl_add_macro_char (key); - - r = 0; - switch (map[key].type) - { - case ISFUNC: - func = map[key].function; - if (func) - { - /* Special case rl_do_lowercase_version (). */ - if (func == rl_do_lowercase_version) - /* Should we do anything special if key == ANYOTHERKEY? */ - return (_rl_dispatch (_rl_to_lower ((unsigned char)key), map)); - - rl_executing_keymap = map; - rl_executing_key = key; - - RESIZE_KEYSEQ_BUFFER(); - rl_executing_keyseq[rl_key_sequence_length++] = key; - rl_executing_keyseq[rl_key_sequence_length] = '\0'; - - rl_dispatching = 1; - RL_SETSTATE(RL_STATE_DISPATCHING); - r = (*func) (rl_numeric_arg * rl_arg_sign, key); - RL_UNSETSTATE(RL_STATE_DISPATCHING); - rl_dispatching = 0; - - /* If we have input pending, then the last command was a prefix - command. Don't change the state of rl_last_func. Otherwise, - remember the last command executed in this variable. */ - if (rl_pending_input == 0 && map[key].function != rl_digit_argument) - rl_last_func = map[key].function; - - RL_CHECK_SIGNALS (); - } - else if (map[ANYOTHERKEY].function) - { - /* OK, there's no function bound in this map, but there is a - shadow function that was overridden when the current keymap - was created. Return -2 to note that. */ - if (RL_ISSTATE (RL_STATE_MACROINPUT)) - _rl_prev_macro_key (); - else - _rl_unget_char (key); - return -2; - } - else if (got_subseq) - { - /* Return -1 to note that we're in a subsequence, but we don't - have a matching key, nor was one overridden. This means - we need to back up the recursion chain and find the last - subsequence that is bound to a function. */ - if (RL_ISSTATE (RL_STATE_MACROINPUT)) - _rl_prev_macro_key (); - else - _rl_unget_char (key); - return -1; - } - else - { -#if defined (READLINE_CALLBACKS) - RL_UNSETSTATE (RL_STATE_MULTIKEY); - _rl_keyseq_chain_dispose (); -#endif - _rl_abort_internal (); - return -1; - } - break; - - case ISKMAP: - if (map[key].function != 0) - { -#if defined (VI_MODE) - /* The only way this test will be true is if a subsequence has been - bound starting with ESC, generally the arrow keys. What we do is - check whether there's input in the queue, which there generally - will be if an arrow key has been pressed, and, if there's not, - just dispatch to (what we assume is) rl_vi_movement_mode right - away. This is essentially an input test with a zero timeout (by - default) or a timeout determined by the value of `keyseq-timeout' */ - /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued - takes microseconds, so multiply by 1000 */ - if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap && - (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && - _rl_pushed_input_available () == 0 && - _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0) - return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key))); - /* This is a very specific test. It can possibly be generalized in - the future, but for now it handles a specific case of ESC being - the last character in a keyboard macro. */ - if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap && - (RL_ISSTATE (RL_STATE_INPUTPENDING) == 0) && - (RL_ISSTATE (RL_STATE_MACROINPUT) && _rl_peek_macro_key () == 0) && - _rl_pushed_input_available () == 0 && - _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0) - return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key))); -#endif - - RESIZE_KEYSEQ_BUFFER (); - rl_executing_keyseq[rl_key_sequence_length++] = key; - _rl_dispatching_keymap = FUNCTION_TO_KEYMAP (map, key); - - /* Allocate new context here. Use linked contexts (linked through - cxt->ocxt) to simulate recursion */ -#if defined (READLINE_CALLBACKS) -# if defined (VI_MODE) - /* If we're redoing a vi mode command and we know there is a shadowed - function corresponding to this key, just call it -- all the redoable - vi mode commands already have all the input they need, and rl_vi_redo - assumes that one call to rl_dispatch is sufficient to complete the - command. */ - if (_rl_vi_redoing && RL_ISSTATE (RL_STATE_CALLBACK) && - map[ANYOTHERKEY].function != 0) - return (_rl_subseq_result (-2, map, key, got_subseq)); -# endif - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - /* Return 0 only the first time, to indicate success to - _rl_callback_read_char. The rest of the time, we're called - from _rl_dispatch_callback, so we return -3 to indicate - special handling is necessary. */ - r = RL_ISSTATE (RL_STATE_MULTIKEY) ? -3 : 0; - cxt = _rl_keyseq_cxt_alloc (); - - if (got_subseq) - cxt->flags |= KSEQ_SUBSEQ; - cxt->okey = key; - cxt->oldmap = map; - cxt->dmap = _rl_dispatching_keymap; - cxt->subseq_arg = got_subseq || cxt->dmap[ANYOTHERKEY].function; - - RL_SETSTATE (RL_STATE_MULTIKEY); - _rl_kscxt = cxt; - - return r; /* don't indicate immediate success */ - } -#endif - - /* Tentative inter-character timeout for potential multi-key - sequences? If no input within timeout, abort sequence and - act as if we got non-matching input. */ - /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued - takes microseconds, so multiply by 1000 */ - if (_rl_keyseq_timeout > 0 && - (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && - _rl_pushed_input_available () == 0 && - _rl_dispatching_keymap[ANYOTHERKEY].function && - _rl_input_queued (_rl_keyseq_timeout*1000) == 0) - return (_rl_subseq_result (-2, map, key, got_subseq)); - - newkey = _rl_subseq_getchar (key); - if (newkey < 0) - { - _rl_abort_internal (); - return -1; - } - - r = _rl_dispatch_subseq (newkey, _rl_dispatching_keymap, got_subseq || map[ANYOTHERKEY].function); - return _rl_subseq_result (r, map, key, got_subseq); - } - else - { - _rl_abort_internal (); /* XXX */ - return -1; - } - break; - - case ISMACR: - if (map[key].function != 0) - { - rl_executing_keyseq[rl_key_sequence_length] = '\0'; - macro = savestring ((char *)map[key].function); - _rl_with_macro_input (macro); - return 0; - } - break; - } - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap && - key != ANYOTHERKEY && - _rl_dispatching_keymap == vi_movement_keymap && - _rl_vi_textmod_command (key)) - _rl_vi_set_last (key, rl_numeric_arg, rl_arg_sign); -#endif - - return (r); -} - -static int -_rl_subseq_result (int r, Keymap map, int key, int got_subseq) -{ - Keymap m; - int type, nt; - rl_command_func_t *func, *nf; - - if (r == -2) - /* We didn't match anything, and the keymap we're indexed into - shadowed a function previously bound to that prefix. Call - the function. The recursive call to _rl_dispatch_subseq has - already taken care of pushing any necessary input back onto - the input queue with _rl_unget_char. */ - { - m = _rl_dispatching_keymap; - type = m[ANYOTHERKEY].type; - func = m[ANYOTHERKEY].function; - if (type == ISFUNC && func == rl_do_lowercase_version) - r = _rl_dispatch (_rl_to_lower ((unsigned char)key), map); - else if (type == ISFUNC) - { - /* If we shadowed a function, whatever it is, we somehow need a - keymap with map[key].func == shadowed-function. - Let's use this one. Then we can dispatch using the original - key, since there are commands (e.g., in vi mode) for which it - matters. */ - nt = m[key].type; - nf = m[key].function; - - m[key].type = type; - m[key].function = func; - /* Don't change _rl_dispatching_keymap, set it here */ - _rl_dispatching_keymap = map; /* previous map */ - r = _rl_dispatch_subseq (key, m, 0); - m[key].type = nt; - m[key].function = nf; - } - else - /* We probably shadowed a keymap, so keep going. */ - r = _rl_dispatch (ANYOTHERKEY, m); - } - else if (r < 0 && map[ANYOTHERKEY].function) - { - /* We didn't match (r is probably -1), so return something to - tell the caller that it should try ANYOTHERKEY for an - overridden function. */ - if (RL_ISSTATE (RL_STATE_MACROINPUT)) - _rl_prev_macro_key (); - else - _rl_unget_char (key); - _rl_dispatching_keymap = map; - return -2; - } - else if (r < 0 && got_subseq) /* XXX */ - { - /* OK, back up the chain. */ - if (RL_ISSTATE (RL_STATE_MACROINPUT)) - _rl_prev_macro_key (); - else - _rl_unget_char (key); - _rl_dispatching_keymap = map; - return -1; - } - - return r; -} - -/* **************************************************************** */ -/* */ -/* Initializations */ -/* */ -/* **************************************************************** */ - -/* Initialize readline (and terminal if not already). */ -int -rl_initialize (void) -{ - /* If we have never been called before, initialize the - terminal and data structures. */ - if (rl_initialized == 0) - { - RL_SETSTATE(RL_STATE_INITIALIZING); - readline_initialize_everything (); - RL_UNSETSTATE(RL_STATE_INITIALIZING); - rl_initialized++; - RL_SETSTATE(RL_STATE_INITIALIZED); - } - else - (void)_rl_init_locale (); /* check current locale */ - - /* Initialize the current line information. */ - _rl_init_line_state (); - - /* We aren't done yet. We haven't even gotten started yet! */ - rl_done = 0; - RL_UNSETSTATE(RL_STATE_DONE); - - /* Tell the history routines what is going on. */ - _rl_start_using_history (); - - /* Make the display buffer match the state of the line. */ - rl_reset_line_state (); - - /* No such function typed yet. */ - rl_last_func = (rl_command_func_t *)NULL; - - /* Parsing of key-bindings begins in an enabled state. */ - _rl_parsing_conditionalized_out = 0; - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - _rl_vi_initialize_line (); -#endif - - /* Each line starts in insert mode (the default). */ - _rl_set_insert_mode (RL_IM_DEFAULT, 1); - - return 0; -} - -#if 0 -#if defined (__EMX__) -static void -_emx_build_environ (void) -{ - TIB *tibp; - PIB *pibp; - char *t, **tp; - int c; - - DosGetInfoBlocks (&tibp, &pibp); - t = pibp->pib_pchenv; - for (c = 1; *t; c++) - t += strlen (t) + 1; - tp = environ = (char **)xmalloc ((c + 1) * sizeof (char *)); - t = pibp->pib_pchenv; - while (*t) - { - *tp++ = t; - t += strlen (t) + 1; - } - *tp = 0; -} -#endif /* __EMX__ */ -#endif - -/* Initialize the entire state of the world. */ -static void -readline_initialize_everything (void) -{ -#if 0 -#if defined (__EMX__) - if (environ == 0) - _emx_build_environ (); -#endif -#endif - -#if 0 - /* Find out if we are running in Emacs -- UNUSED. */ - running_in_emacs = sh_get_env_value ("EMACS") != (char *)0; -#endif - - /* Set up input and output if they are not already set up. */ - if (!rl_instream) - rl_instream = stdin; - - if (!rl_outstream) - rl_outstream = stdout; - - /* Bind _rl_in_stream and _rl_out_stream immediately. These values - may change, but they may also be used before readline_internal () - is called. */ - _rl_in_stream = rl_instream; - _rl_out_stream = rl_outstream; - - /* Allocate data structures. */ - if (rl_line_buffer == 0) - rl_line_buffer = (char *)xmalloc (rl_line_buffer_len = DEFAULT_BUFFER_SIZE); - - /* Initialize the terminal interface. */ - if (rl_terminal_name == 0) - rl_terminal_name = sh_get_env_value ("TERM"); - _rl_init_terminal_io (rl_terminal_name); - - /* Bind tty characters to readline functions. */ - readline_default_bindings (); - - /* Initialize the function names. */ - rl_initialize_funmap (); - - /* Decide whether we should automatically go into eight-bit mode. */ - _rl_init_eightbit (); - - /* Read in the init file. */ - rl_read_init_file ((char *)NULL); - - /* XXX */ - if (_rl_horizontal_scroll_mode && _rl_term_autowrap) - { - _rl_screenwidth--; - _rl_screenchars -= _rl_screenheight; - } - - /* Override the effect of any `set keymap' assignments in the - inputrc file. */ - rl_set_keymap_from_edit_mode (); - - /* Try to bind a common arrow key prefix, if not already bound. */ - bind_arrow_keys (); - - /* Bind the bracketed paste prefix assuming that the user will enable - it on terminals that support it. */ - bind_bracketed_paste_prefix (); - - /* If the completion parser's default word break characters haven't - been set yet, then do so now. */ - if (rl_completer_word_break_characters == (char *)NULL) - rl_completer_word_break_characters = (char *)rl_basic_word_break_characters; - -#if defined (COLOR_SUPPORT) - if (_rl_colored_stats || _rl_colored_completion_prefix) - _rl_parse_colors (); -#endif - - rl_executing_keyseq = malloc (_rl_executing_keyseq_size = 16); - if (rl_executing_keyseq) - rl_executing_keyseq[0] = '\0'; -} - -/* If this system allows us to look at the values of the regular - input editing characters, then bind them to their readline - equivalents, iff the characters are not bound to keymaps. */ -static void -readline_default_bindings (void) -{ - if (_rl_bind_stty_chars) - rl_tty_set_default_bindings (_rl_keymap); -} - -/* Reset the default bindings for the terminal special characters we're - interested in back to rl_insert and read the new ones. */ -static void -reset_default_bindings (void) -{ - if (_rl_bind_stty_chars) - { - rl_tty_unset_default_bindings (_rl_keymap); - rl_tty_set_default_bindings (_rl_keymap); - } -} - -/* Bind some common arrow key sequences in MAP. */ -static void -bind_arrow_keys_internal (Keymap map) -{ - Keymap xkeymap; - - xkeymap = _rl_keymap; - _rl_keymap = map; - -#if defined (__MSDOS__) - rl_bind_keyseq_if_unbound ("\033[0A", rl_get_previous_history); - rl_bind_keyseq_if_unbound ("\033[0B", rl_backward_char); - rl_bind_keyseq_if_unbound ("\033[0C", rl_forward_char); - rl_bind_keyseq_if_unbound ("\033[0D", rl_get_next_history); -#endif - - rl_bind_keyseq_if_unbound ("\033[A", rl_get_previous_history); - rl_bind_keyseq_if_unbound ("\033[B", rl_get_next_history); - rl_bind_keyseq_if_unbound ("\033[C", rl_forward_char); - rl_bind_keyseq_if_unbound ("\033[D", rl_backward_char); - rl_bind_keyseq_if_unbound ("\033[H", rl_beg_of_line); - rl_bind_keyseq_if_unbound ("\033[F", rl_end_of_line); - - rl_bind_keyseq_if_unbound ("\033OA", rl_get_previous_history); - rl_bind_keyseq_if_unbound ("\033OB", rl_get_next_history); - rl_bind_keyseq_if_unbound ("\033OC", rl_forward_char); - rl_bind_keyseq_if_unbound ("\033OD", rl_backward_char); - rl_bind_keyseq_if_unbound ("\033OH", rl_beg_of_line); - rl_bind_keyseq_if_unbound ("\033OF", rl_end_of_line); - - /* Key bindings for control-arrow keys */ - rl_bind_keyseq_if_unbound ("\033[1;5C", rl_forward_word); - rl_bind_keyseq_if_unbound ("\033[1;5D", rl_backward_word); - rl_bind_keyseq_if_unbound ("\033[3;5~", rl_kill_word); - - /* Key bindings for alt-arrow keys */ - rl_bind_keyseq_if_unbound ("\033[1;3C", rl_forward_word); - rl_bind_keyseq_if_unbound ("\033[1;3D", rl_backward_word); - -#if defined (__MINGW32__) - rl_bind_keyseq_if_unbound ("\340H", rl_get_previous_history); - rl_bind_keyseq_if_unbound ("\340P", rl_get_next_history); - rl_bind_keyseq_if_unbound ("\340M", rl_forward_char); - rl_bind_keyseq_if_unbound ("\340K", rl_backward_char); - rl_bind_keyseq_if_unbound ("\340G", rl_beg_of_line); - rl_bind_keyseq_if_unbound ("\340O", rl_end_of_line); - rl_bind_keyseq_if_unbound ("\340S", rl_delete); - rl_bind_keyseq_if_unbound ("\340R", rl_overwrite_mode); - - /* These may or may not work because of the embedded NUL. */ - rl_bind_keyseq_if_unbound ("\\000H", rl_get_previous_history); - rl_bind_keyseq_if_unbound ("\\000P", rl_get_next_history); - rl_bind_keyseq_if_unbound ("\\000M", rl_forward_char); - rl_bind_keyseq_if_unbound ("\\000K", rl_backward_char); - rl_bind_keyseq_if_unbound ("\\000G", rl_beg_of_line); - rl_bind_keyseq_if_unbound ("\\000O", rl_end_of_line); - rl_bind_keyseq_if_unbound ("\\000S", rl_delete); - rl_bind_keyseq_if_unbound ("\\000R", rl_overwrite_mode); -#endif - - _rl_keymap = xkeymap; -} - -/* Try and bind the common arrow key prefixes after giving termcap and - the inputrc file a chance to bind them and create `real' keymaps - for the arrow key prefix. */ -static void -bind_arrow_keys (void) -{ - bind_arrow_keys_internal (emacs_standard_keymap); - -#if defined (VI_MODE) - bind_arrow_keys_internal (vi_movement_keymap); - /* Unbind vi_movement_keymap[ESC] to allow users to repeatedly hit ESC - in vi command mode while still allowing the arrow keys to work. */ - if (vi_movement_keymap[ESC].type == ISKMAP) - rl_bind_keyseq_in_map ("\033", (rl_command_func_t *)NULL, vi_movement_keymap); - bind_arrow_keys_internal (vi_insertion_keymap); -#endif -} - -static void -bind_bracketed_paste_prefix (void) -{ - Keymap xkeymap; - - xkeymap = _rl_keymap; - - _rl_keymap = emacs_standard_keymap; - rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin); - - _rl_keymap = vi_insertion_keymap; - rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin); - - _rl_keymap = xkeymap; -} - -/* **************************************************************** */ -/* */ -/* Saving and Restoring Readline's state */ -/* */ -/* **************************************************************** */ - -int -rl_save_state (struct readline_state *sp) -{ - if (sp == 0) - return -1; - - sp->point = rl_point; - sp->end = rl_end; - sp->mark = rl_mark; - sp->buffer = rl_line_buffer; - sp->buflen = rl_line_buffer_len; - sp->ul = rl_undo_list; - sp->prompt = rl_prompt; - - sp->rlstate = rl_readline_state; - sp->done = rl_done; - sp->kmap = _rl_keymap; - - sp->lastfunc = rl_last_func; - sp->insmode = rl_insert_mode; - sp->edmode = rl_editing_mode; - sp->kseq = rl_executing_keyseq; - sp->kseqlen = rl_key_sequence_length; - sp->inf = rl_instream; - sp->outf = rl_outstream; - sp->pendingin = rl_pending_input; - sp->macro = rl_executing_macro; - - sp->catchsigs = rl_catch_signals; - sp->catchsigwinch = rl_catch_sigwinch; - - sp->entryfunc = rl_completion_entry_function; - sp->menuentryfunc = rl_menu_completion_entry_function; - sp->ignorefunc = rl_ignore_some_completions_function; - sp->attemptfunc = rl_attempted_completion_function; - sp->wordbreakchars = rl_completer_word_break_characters; - - return (0); -} - -int -rl_restore_state (struct readline_state *sp) -{ - if (sp == 0) - return -1; - - rl_point = sp->point; - rl_end = sp->end; - rl_mark = sp->mark; - the_line = rl_line_buffer = sp->buffer; - rl_line_buffer_len = sp->buflen; - rl_undo_list = sp->ul; - rl_prompt = sp->prompt; - - rl_readline_state = sp->rlstate; - rl_done = sp->done; - _rl_keymap = sp->kmap; - - rl_last_func = sp->lastfunc; - rl_insert_mode = sp->insmode; - rl_editing_mode = sp->edmode; - rl_executing_keyseq = sp->kseq; - rl_key_sequence_length = sp->kseqlen; - rl_instream = sp->inf; - rl_outstream = sp->outf; - rl_pending_input = sp->pendingin; - rl_executing_macro = sp->macro; - - rl_catch_signals = sp->catchsigs; - rl_catch_sigwinch = sp->catchsigwinch; - - rl_completion_entry_function = sp->entryfunc; - rl_menu_completion_entry_function = sp->menuentryfunc; - rl_ignore_some_completions_function = sp->ignorefunc; - rl_attempted_completion_function = sp->attemptfunc; - rl_completer_word_break_characters = sp->wordbreakchars; - - return (0); -} diff --git a/readline/readline.h b/readline/readline.h deleted file mode 100644 index da782716af..0000000000 --- a/readline/readline.h +++ /dev/null @@ -1,959 +0,0 @@ -/* Readline.h -- the names of functions callable from within readline. */ - -/* Copyright (C) 1987-2016 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_READLINE_H_) -#define _READLINE_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -#if defined (READLINE_LIBRARY) -# include "rlstdc.h" -# include "rltypedefs.h" -# include "keymaps.h" -# include "tilde.h" -#else -# include -# include -# include -# include -#endif - -/* Hex-encoded Readline version number. */ -#define RL_READLINE_VERSION 0x0800 /* Readline 8.0 */ -#define RL_VERSION_MAJOR 8 -#define RL_VERSION_MINOR 0 - -/* Readline data structures. */ - -/* Maintaining the state of undo. We remember individual deletes and inserts - on a chain of things to do. */ - -/* The actions that undo knows how to undo. Notice that UNDO_DELETE means - to insert some text, and UNDO_INSERT means to delete some text. I.e., - the code tells undo what to undo, not how to undo it. */ -enum undo_code { UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END }; - -/* What an element of THE_UNDO_LIST looks like. */ -typedef struct undo_list { - struct undo_list *next; - int start, end; /* Where the change took place. */ - char *text; /* The text to insert, if undoing a delete. */ - enum undo_code what; /* Delete, Insert, Begin, End. */ -} UNDO_LIST; - -/* The current undo list for RL_LINE_BUFFER. */ -extern UNDO_LIST *rl_undo_list; - -/* The data structure for mapping textual names to code addresses. */ -typedef struct _funmap { - const char *name; - rl_command_func_t *function; -} FUNMAP; - -extern FUNMAP **funmap; - -/* **************************************************************** */ -/* */ -/* Functions available to bind to key sequences */ -/* */ -/* **************************************************************** */ - -/* Bindable commands for numeric arguments. */ -extern int rl_digit_argument PARAMS((int, int)); -extern int rl_universal_argument PARAMS((int, int)); - -/* Bindable commands for moving the cursor. */ -extern int rl_forward_byte PARAMS((int, int)); -extern int rl_forward_char PARAMS((int, int)); -extern int rl_forward PARAMS((int, int)); -extern int rl_backward_byte PARAMS((int, int)); -extern int rl_backward_char PARAMS((int, int)); -extern int rl_backward PARAMS((int, int)); -extern int rl_beg_of_line PARAMS((int, int)); -extern int rl_end_of_line PARAMS((int, int)); -extern int rl_forward_word PARAMS((int, int)); -extern int rl_backward_word PARAMS((int, int)); -extern int rl_refresh_line PARAMS((int, int)); -extern int rl_clear_screen PARAMS((int, int)); -extern int rl_skip_csi_sequence PARAMS((int, int)); -extern int rl_arrow_keys PARAMS((int, int)); - -extern int rl_previous_screen_line PARAMS((int, int)); -extern int rl_next_screen_line PARAMS((int, int)); - -/* Bindable commands for inserting and deleting text. */ -extern int rl_insert PARAMS((int, int)); -extern int rl_quoted_insert PARAMS((int, int)); -extern int rl_tab_insert PARAMS((int, int)); -extern int rl_newline PARAMS((int, int)); -extern int rl_do_lowercase_version PARAMS((int, int)); -extern int rl_rubout PARAMS((int, int)); -extern int rl_delete PARAMS((int, int)); -extern int rl_rubout_or_delete PARAMS((int, int)); -extern int rl_delete_horizontal_space PARAMS((int, int)); -extern int rl_delete_or_show_completions PARAMS((int, int)); -extern int rl_insert_comment PARAMS((int, int)); - -/* Bindable commands for changing case. */ -extern int rl_upcase_word PARAMS((int, int)); -extern int rl_downcase_word PARAMS((int, int)); -extern int rl_capitalize_word PARAMS((int, int)); - -/* Bindable commands for transposing characters and words. */ -extern int rl_transpose_words PARAMS((int, int)); -extern int rl_transpose_chars PARAMS((int, int)); - -/* Bindable commands for searching within a line. */ -extern int rl_char_search PARAMS((int, int)); -extern int rl_backward_char_search PARAMS((int, int)); - -/* Bindable commands for readline's interface to the command history. */ -extern int rl_beginning_of_history PARAMS((int, int)); -extern int rl_end_of_history PARAMS((int, int)); -extern int rl_get_next_history PARAMS((int, int)); -extern int rl_get_previous_history PARAMS((int, int)); - -/* Bindable commands for managing the mark and region. */ -extern int rl_set_mark PARAMS((int, int)); -extern int rl_exchange_point_and_mark PARAMS((int, int)); - -/* Bindable commands to set the editing mode (emacs or vi). */ -extern int rl_vi_editing_mode PARAMS((int, int)); -extern int rl_emacs_editing_mode PARAMS((int, int)); - -/* Bindable commands to change the insert mode (insert or overwrite) */ -extern int rl_overwrite_mode PARAMS((int, int)); - -/* Bindable commands for managing key bindings. */ -extern int rl_re_read_init_file PARAMS((int, int)); -extern int rl_dump_functions PARAMS((int, int)); -extern int rl_dump_macros PARAMS((int, int)); -extern int rl_dump_variables PARAMS((int, int)); - -/* Bindable commands for word completion. */ -extern int rl_complete PARAMS((int, int)); -extern int rl_possible_completions PARAMS((int, int)); -extern int rl_insert_completions PARAMS((int, int)); -extern int rl_old_menu_complete PARAMS((int, int)); -extern int rl_menu_complete PARAMS((int, int)); -extern int rl_backward_menu_complete PARAMS((int, int)); - -/* Bindable commands for killing and yanking text, and managing the kill ring. */ -extern int rl_kill_word PARAMS((int, int)); -extern int rl_backward_kill_word PARAMS((int, int)); -extern int rl_kill_line PARAMS((int, int)); -extern int rl_backward_kill_line PARAMS((int, int)); -extern int rl_kill_full_line PARAMS((int, int)); -extern int rl_unix_word_rubout PARAMS((int, int)); -extern int rl_unix_filename_rubout PARAMS((int, int)); -extern int rl_unix_line_discard PARAMS((int, int)); -extern int rl_copy_region_to_kill PARAMS((int, int)); -extern int rl_kill_region PARAMS((int, int)); -extern int rl_copy_forward_word PARAMS((int, int)); -extern int rl_copy_backward_word PARAMS((int, int)); -extern int rl_yank PARAMS((int, int)); -extern int rl_yank_pop PARAMS((int, int)); -extern int rl_yank_nth_arg PARAMS((int, int)); -extern int rl_yank_last_arg PARAMS((int, int)); -extern int rl_bracketed_paste_begin PARAMS((int, int)); -/* Not available unless _WIN32 is defined. */ -#if defined (_WIN32) -extern int rl_paste_from_clipboard PARAMS((int, int)); -#endif - -/* Bindable commands for incremental searching. */ -extern int rl_reverse_search_history PARAMS((int, int)); -extern int rl_forward_search_history PARAMS((int, int)); - -/* Bindable keyboard macro commands. */ -extern int rl_start_kbd_macro PARAMS((int, int)); -extern int rl_end_kbd_macro PARAMS((int, int)); -extern int rl_call_last_kbd_macro PARAMS((int, int)); -extern int rl_print_last_kbd_macro PARAMS((int, int)); - -/* Bindable undo commands. */ -extern int rl_revert_line PARAMS((int, int)); -extern int rl_undo_command PARAMS((int, int)); - -/* Bindable tilde expansion commands. */ -extern int rl_tilde_expand PARAMS((int, int)); - -/* Bindable terminal control commands. */ -extern int rl_restart_output PARAMS((int, int)); -extern int rl_stop_output PARAMS((int, int)); - -/* Miscellaneous bindable commands. */ -extern int rl_abort PARAMS((int, int)); -extern int rl_tty_status PARAMS((int, int)); - -/* Bindable commands for incremental and non-incremental history searching. */ -extern int rl_history_search_forward PARAMS((int, int)); -extern int rl_history_search_backward PARAMS((int, int)); -extern int rl_history_substr_search_forward PARAMS((int, int)); -extern int rl_history_substr_search_backward PARAMS((int, int)); -extern int rl_noninc_forward_search PARAMS((int, int)); -extern int rl_noninc_reverse_search PARAMS((int, int)); -extern int rl_noninc_forward_search_again PARAMS((int, int)); -extern int rl_noninc_reverse_search_again PARAMS((int, int)); - -/* Bindable command used when inserting a matching close character. */ -extern int rl_insert_close PARAMS((int, int)); - -/* Not available unless READLINE_CALLBACKS is defined. */ -extern void rl_callback_handler_install PARAMS((const char *, rl_vcpfunc_t *)); -extern void rl_callback_read_char PARAMS((void)); -extern void rl_callback_handler_remove PARAMS((void)); -extern void rl_callback_sigcleanup PARAMS((void)); - -/* Things for vi mode. Not available unless readline is compiled -DVI_MODE. */ -/* VI-mode bindable commands. */ -extern int rl_vi_redo PARAMS((int, int)); -extern int rl_vi_undo PARAMS((int, int)); -extern int rl_vi_yank_arg PARAMS((int, int)); -extern int rl_vi_fetch_history PARAMS((int, int)); -extern int rl_vi_search_again PARAMS((int, int)); -extern int rl_vi_search PARAMS((int, int)); -extern int rl_vi_complete PARAMS((int, int)); -extern int rl_vi_tilde_expand PARAMS((int, int)); -extern int rl_vi_prev_word PARAMS((int, int)); -extern int rl_vi_next_word PARAMS((int, int)); -extern int rl_vi_end_word PARAMS((int, int)); -extern int rl_vi_insert_beg PARAMS((int, int)); -extern int rl_vi_append_mode PARAMS((int, int)); -extern int rl_vi_append_eol PARAMS((int, int)); -extern int rl_vi_eof_maybe PARAMS((int, int)); -extern int rl_vi_insertion_mode PARAMS((int, int)); -extern int rl_vi_insert_mode PARAMS((int, int)); -extern int rl_vi_movement_mode PARAMS((int, int)); -extern int rl_vi_arg_digit PARAMS((int, int)); -extern int rl_vi_change_case PARAMS((int, int)); -extern int rl_vi_put PARAMS((int, int)); -extern int rl_vi_column PARAMS((int, int)); -extern int rl_vi_delete_to PARAMS((int, int)); -extern int rl_vi_change_to PARAMS((int, int)); -extern int rl_vi_yank_to PARAMS((int, int)); -extern int rl_vi_yank_pop PARAMS((int, int)); -extern int rl_vi_rubout PARAMS((int, int)); -extern int rl_vi_delete PARAMS((int, int)); -extern int rl_vi_back_to_indent PARAMS((int, int)); -extern int rl_vi_unix_word_rubout PARAMS((int, int)); -extern int rl_vi_first_print PARAMS((int, int)); -extern int rl_vi_char_search PARAMS((int, int)); -extern int rl_vi_match PARAMS((int, int)); -extern int rl_vi_change_char PARAMS((int, int)); -extern int rl_vi_subst PARAMS((int, int)); -extern int rl_vi_overstrike PARAMS((int, int)); -extern int rl_vi_overstrike_delete PARAMS((int, int)); -extern int rl_vi_replace PARAMS((int, int)); -extern int rl_vi_set_mark PARAMS((int, int)); -extern int rl_vi_goto_mark PARAMS((int, int)); - -/* VI-mode utility functions. */ -extern int rl_vi_check PARAMS((void)); -extern int rl_vi_domove PARAMS((int, int *)); -extern int rl_vi_bracktype PARAMS((int)); - -extern void rl_vi_start_inserting PARAMS((int, int, int)); - -/* VI-mode pseudo-bindable commands, used as utility functions. */ -extern int rl_vi_fWord PARAMS((int, int)); -extern int rl_vi_bWord PARAMS((int, int)); -extern int rl_vi_eWord PARAMS((int, int)); -extern int rl_vi_fword PARAMS((int, int)); -extern int rl_vi_bword PARAMS((int, int)); -extern int rl_vi_eword PARAMS((int, int)); - -/* **************************************************************** */ -/* */ -/* Well Published Functions */ -/* */ -/* **************************************************************** */ - -/* Readline functions. */ -/* Read a line of input. Prompt with PROMPT. A NULL PROMPT means none. */ -extern char *readline PARAMS((const char *)); - -extern int rl_set_prompt PARAMS((const char *)); -extern int rl_expand_prompt PARAMS((char *)); - -extern int rl_initialize PARAMS((void)); - -/* Undocumented; unused by readline */ -extern int rl_discard_argument PARAMS((void)); - -/* Utility functions to bind keys to readline commands. */ -extern int rl_add_defun PARAMS((const char *, rl_command_func_t *, int)); -extern int rl_bind_key PARAMS((int, rl_command_func_t *)); -extern int rl_bind_key_in_map PARAMS((int, rl_command_func_t *, Keymap)); -extern int rl_unbind_key PARAMS((int)); -extern int rl_unbind_key_in_map PARAMS((int, Keymap)); -extern int rl_bind_key_if_unbound PARAMS((int, rl_command_func_t *)); -extern int rl_bind_key_if_unbound_in_map PARAMS((int, rl_command_func_t *, Keymap)); -extern int rl_unbind_function_in_map PARAMS((rl_command_func_t *, Keymap)); -extern int rl_unbind_command_in_map PARAMS((const char *, Keymap)); -extern int rl_bind_keyseq PARAMS((const char *, rl_command_func_t *)); -extern int rl_bind_keyseq_in_map PARAMS((const char *, rl_command_func_t *, Keymap)); -extern int rl_bind_keyseq_if_unbound PARAMS((const char *, rl_command_func_t *)); -extern int rl_bind_keyseq_if_unbound_in_map PARAMS((const char *, rl_command_func_t *, Keymap)); -extern int rl_generic_bind PARAMS((int, const char *, char *, Keymap)); - -extern char *rl_variable_value PARAMS((const char *)); -extern int rl_variable_bind PARAMS((const char *, const char *)); - -/* Backwards compatibility, use rl_bind_keyseq_in_map instead. */ -extern int rl_set_key PARAMS((const char *, rl_command_func_t *, Keymap)); - -/* Backwards compatibility, use rl_generic_bind instead. */ -extern int rl_macro_bind PARAMS((const char *, const char *, Keymap)); - -/* Undocumented in the texinfo manual; not really useful to programs. */ -extern int rl_translate_keyseq PARAMS((const char *, char *, int *)); -extern char *rl_untranslate_keyseq PARAMS((int)); - -extern rl_command_func_t *rl_named_function PARAMS((const char *)); -extern rl_command_func_t *rl_function_of_keyseq PARAMS((const char *, Keymap, int *)); -extern rl_command_func_t *rl_function_of_keyseq_len PARAMS((const char *, size_t, Keymap, int *)); - -extern void rl_list_funmap_names PARAMS((void)); -extern char **rl_invoking_keyseqs_in_map PARAMS((rl_command_func_t *, Keymap)); -extern char **rl_invoking_keyseqs PARAMS((rl_command_func_t *)); - -extern void rl_function_dumper PARAMS((int)); -extern void rl_macro_dumper PARAMS((int)); -extern void rl_variable_dumper PARAMS((int)); - -extern int rl_read_init_file PARAMS((const char *)); -extern int rl_parse_and_bind PARAMS((char *)); - -/* Functions for manipulating keymaps. */ -extern Keymap rl_make_bare_keymap PARAMS((void)); -extern int rl_empty_keymap PARAMS((Keymap)); -extern Keymap rl_copy_keymap PARAMS((Keymap)); -extern Keymap rl_make_keymap PARAMS((void)); -extern void rl_discard_keymap PARAMS((Keymap)); -extern void rl_free_keymap PARAMS((Keymap)); - -extern Keymap rl_get_keymap_by_name PARAMS((const char *)); -extern char *rl_get_keymap_name PARAMS((Keymap)); -extern void rl_set_keymap PARAMS((Keymap)); -extern Keymap rl_get_keymap PARAMS((void)); - -extern int rl_set_keymap_name PARAMS((const char *, Keymap)); - -/* Undocumented; used internally only. */ -extern void rl_set_keymap_from_edit_mode PARAMS((void)); -extern char *rl_get_keymap_name_from_edit_mode PARAMS((void)); - -/* Functions for manipulating the funmap, which maps command names to functions. */ -extern int rl_add_funmap_entry PARAMS((const char *, rl_command_func_t *)); -extern const char **rl_funmap_names PARAMS((void)); -/* Undocumented, only used internally -- there is only one funmap, and this - function may be called only once. */ -extern void rl_initialize_funmap PARAMS((void)); - -/* Utility functions for managing keyboard macros. */ -extern void rl_push_macro_input PARAMS((char *)); - -/* Functions for undoing, from undo.c */ -extern void rl_add_undo PARAMS((enum undo_code, int, int, char *)); -extern void rl_free_undo_list PARAMS((void)); -extern int rl_do_undo PARAMS((void)); -extern int rl_begin_undo_group PARAMS((void)); -extern int rl_end_undo_group PARAMS((void)); -extern int rl_modifying PARAMS((int, int)); - -/* Functions for redisplay. */ -extern void rl_redisplay PARAMS((void)); -extern int rl_on_new_line PARAMS((void)); -extern int rl_on_new_line_with_prompt PARAMS((void)); -extern int rl_forced_update_display PARAMS((void)); -extern int rl_clear_visible_line PARAMS((void)); -extern int rl_clear_message PARAMS((void)); -extern int rl_reset_line_state PARAMS((void)); -extern int rl_crlf PARAMS((void)); - -#if defined (USE_VARARGS) && defined (PREFER_STDARG) -extern int rl_message (const char *, ...) __attribute__((__format__ (printf, 1, 2))); -#else -extern int rl_message (); -#endif - -extern int rl_show_char PARAMS((int)); - -/* Undocumented in texinfo manual. */ -extern int rl_character_len PARAMS((int, int)); -extern void rl_redraw_prompt_last_line PARAMS((void)); - -/* Save and restore internal prompt redisplay information. */ -extern void rl_save_prompt PARAMS((void)); -extern void rl_restore_prompt PARAMS((void)); - -/* Modifying text. */ -extern void rl_replace_line PARAMS((const char *, int)); -extern int rl_insert_text PARAMS((const char *)); -extern int rl_delete_text PARAMS((int, int)); -extern int rl_kill_text PARAMS((int, int)); -extern char *rl_copy_text PARAMS((int, int)); - -/* Terminal and tty mode management. */ -extern void rl_prep_terminal PARAMS((int)); -extern void rl_deprep_terminal PARAMS((void)); -extern void rl_tty_set_default_bindings PARAMS((Keymap)); -extern void rl_tty_unset_default_bindings PARAMS((Keymap)); - -extern int rl_tty_set_echoing PARAMS((int)); -extern int rl_reset_terminal PARAMS((const char *)); -extern void rl_resize_terminal PARAMS((void)); -extern void rl_set_screen_size PARAMS((int, int)); -extern void rl_get_screen_size PARAMS((int *, int *)); -extern void rl_reset_screen_size PARAMS((void)); - -extern char *rl_get_termcap PARAMS((const char *)); - -/* Functions for character input. */ -extern int rl_stuff_char PARAMS((int)); -extern int rl_execute_next PARAMS((int)); -extern int rl_clear_pending_input PARAMS((void)); -extern int rl_read_key PARAMS((void)); -extern int rl_getc PARAMS((FILE *)); -extern int rl_set_keyboard_input_timeout PARAMS((int)); - -/* `Public' utility functions . */ -extern void rl_extend_line_buffer PARAMS((int)); -extern int rl_ding PARAMS((void)); -extern int rl_alphabetic PARAMS((int)); -extern void rl_free PARAMS((void *)); - -/* Readline signal handling, from signals.c */ -extern int rl_set_signals PARAMS((void)); -extern int rl_clear_signals PARAMS((void)); -extern void rl_cleanup_after_signal PARAMS((void)); -extern void rl_reset_after_signal PARAMS((void)); -extern void rl_free_line_state PARAMS((void)); - -extern int rl_pending_signal PARAMS((void)); -extern void rl_check_signals PARAMS((void)); - -extern void rl_echo_signal_char PARAMS((int)); - -extern int rl_set_paren_blink_timeout PARAMS((int)); - -/* History management functions. */ - -extern void rl_clear_history PARAMS((void)); - -/* Undocumented. */ -extern int rl_maybe_save_line PARAMS((void)); -extern int rl_maybe_unsave_line PARAMS((void)); -extern int rl_maybe_replace_line PARAMS((void)); - -/* Completion functions. */ -extern int rl_complete_internal PARAMS((int)); -extern void rl_display_match_list PARAMS((char **, int, int)); - -extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *)); -extern char *rl_username_completion_function PARAMS((const char *, int)); -extern char *rl_filename_completion_function PARAMS((const char *, int)); - -extern int rl_completion_mode PARAMS((rl_command_func_t *)); - -#if 0 -/* Backwards compatibility (compat.c). These will go away sometime. */ -extern void free_undo_list PARAMS((void)); -extern int maybe_save_line PARAMS((void)); -extern int maybe_unsave_line PARAMS((void)); -extern int maybe_replace_line PARAMS((void)); - -extern int ding PARAMS((void)); -extern int alphabetic PARAMS((int)); -extern int crlf PARAMS((void)); - -extern char **completion_matches PARAMS((char *, rl_compentry_func_t *)); -extern char *username_completion_function PARAMS((const char *, int)); -extern char *filename_completion_function PARAMS((const char *, int)); -#endif - -/* **************************************************************** */ -/* */ -/* Well Published Variables */ -/* */ -/* **************************************************************** */ - -/* The version of this incarnation of the readline library. */ -extern const char *rl_library_version; /* e.g., "4.2" */ -extern int rl_readline_version; /* e.g., 0x0402 */ - -/* True if this is real GNU readline. */ -extern int rl_gnu_readline_p; - -/* Flags word encapsulating the current readline state. */ -extern unsigned long rl_readline_state; - -/* Says which editing mode readline is currently using. 1 means emacs mode; - 0 means vi mode. */ -extern int rl_editing_mode; - -/* Insert or overwrite mode for emacs mode. 1 means insert mode; 0 means - overwrite mode. Reset to insert mode on each input line. */ -extern int rl_insert_mode; - -/* The name of the calling program. You should initialize this to - whatever was in argv[0]. It is used when parsing conditionals. */ -extern const char *rl_readline_name; - -/* The prompt readline uses. This is set from the argument to - readline (), and should not be assigned to directly. */ -extern char *rl_prompt; - -/* The prompt string that is actually displayed by rl_redisplay. Public so - applications can more easily supply their own redisplay functions. */ -extern char *rl_display_prompt; - -/* The line buffer that is in use. */ -extern char *rl_line_buffer; - -/* The location of point, and end. */ -extern int rl_point; -extern int rl_end; - -/* The mark, or saved cursor position. */ -extern int rl_mark; - -/* Flag to indicate that readline has finished with the current input - line and should return it. */ -extern int rl_done; - -/* If set to a character value, that will be the next keystroke read. */ -extern int rl_pending_input; - -/* Non-zero if we called this function from _rl_dispatch(). It's present - so functions can find out whether they were called from a key binding - or directly from an application. */ -extern int rl_dispatching; - -/* Non-zero if the user typed a numeric argument before executing the - current function. */ -extern int rl_explicit_arg; - -/* The current value of the numeric argument specified by the user. */ -extern int rl_numeric_arg; - -/* The address of the last command function Readline executed. */ -extern rl_command_func_t *rl_last_func; - -/* The name of the terminal to use. */ -extern const char *rl_terminal_name; - -/* The input and output streams. */ -extern FILE *rl_instream; -extern FILE *rl_outstream; - -/* If non-zero, Readline gives values of LINES and COLUMNS from the environment - greater precedence than values fetched from the kernel when computing the - screen dimensions. */ -extern int rl_prefer_env_winsize; - -/* If non-zero, then this is the address of a function to call just - before readline_internal () prints the first prompt. */ -extern rl_hook_func_t *rl_startup_hook; - -/* If non-zero, this is the address of a function to call just before - readline_internal_setup () returns and readline_internal starts - reading input characters. */ -extern rl_hook_func_t *rl_pre_input_hook; - -/* The address of a function to call periodically while Readline is - awaiting character input, or NULL, for no event handling. */ -extern rl_hook_func_t *rl_event_hook; - -/* The address of a function to call if a read is interrupted by a signal. */ -extern rl_hook_func_t *rl_signal_event_hook; - -/* The address of a function to call if Readline needs to know whether or not - there is data available from the current input source. */ -extern rl_hook_func_t *rl_input_available_hook; - -/* The address of the function to call to fetch a character from the current - Readline input stream */ -extern rl_getc_func_t *rl_getc_function; - -extern rl_voidfunc_t *rl_redisplay_function; - -extern rl_vintfunc_t *rl_prep_term_function; -extern rl_voidfunc_t *rl_deprep_term_function; - -/* Dispatch variables. */ -extern Keymap rl_executing_keymap; -extern Keymap rl_binding_keymap; - -extern int rl_executing_key; -extern char *rl_executing_keyseq; -extern int rl_key_sequence_length; - -/* Display variables. */ -/* If non-zero, readline will erase the entire line, including any prompt, - if the only thing typed on an otherwise-blank line is something bound to - rl_newline. */ -extern int rl_erase_empty_line; - -/* If non-zero, the application has already printed the prompt (rl_prompt) - before calling readline, so readline should not output it the first time - redisplay is done. */ -extern int rl_already_prompted; - -/* A non-zero value means to read only this many characters rather than - up to a character bound to accept-line. */ -extern int rl_num_chars_to_read; - -/* The text of a currently-executing keyboard macro. */ -extern char *rl_executing_macro; - -/* Variables to control readline signal handling. */ -/* If non-zero, readline will install its own signal handlers for - SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */ -extern int rl_catch_signals; - -/* If non-zero, readline will install a signal handler for SIGWINCH - that also attempts to call any calling application's SIGWINCH signal - handler. Note that the terminal is not cleaned up before the - application's signal handler is called; use rl_cleanup_after_signal() - to do that. */ -extern int rl_catch_sigwinch; - -/* If non-zero, the readline SIGWINCH handler will modify LINES and - COLUMNS in the environment. */ -extern int rl_change_environment; - -/* Completion variables. */ -/* Pointer to the generator function for completion_matches (). - NULL means to use rl_filename_completion_function (), the default - filename completer. */ -extern rl_compentry_func_t *rl_completion_entry_function; - -/* Optional generator for menu completion. Default is - rl_completion_entry_function (rl_filename_completion_function). */ -extern rl_compentry_func_t *rl_menu_completion_entry_function; - -/* If rl_ignore_some_completions_function is non-NULL it is the address - of a function to call after all of the possible matches have been - generated, but before the actual completion is done to the input line. - The function is called with one argument; a NULL terminated array - of (char *). If your function removes any of the elements, they - must be free()'ed. */ -extern rl_compignore_func_t *rl_ignore_some_completions_function; - -/* Pointer to alternative function to create matches. - Function is called with TEXT, START, and END. - START and END are indices in RL_LINE_BUFFER saying what the boundaries - of TEXT are. - If this function exists and returns NULL then call the value of - rl_completion_entry_function to try to match, otherwise use the - array of strings returned. */ -extern rl_completion_func_t *rl_attempted_completion_function; - -/* The basic list of characters that signal a break between words for the - completer routine. The initial contents of this variable is what - breaks words in the shell, i.e. "n\"\\'`@$>". */ -extern const char *rl_basic_word_break_characters; - -/* The list of characters that signal a break between words for - rl_complete_internal. The default list is the contents of - rl_basic_word_break_characters. */ -extern /*const*/ char *rl_completer_word_break_characters; - -/* Hook function to allow an application to set the completion word - break characters before readline breaks up the line. Allows - position-dependent word break characters. */ -extern rl_cpvfunc_t *rl_completion_word_break_hook; - -/* List of characters which can be used to quote a substring of the line. - Completion occurs on the entire substring, and within the substring - rl_completer_word_break_characters are treated as any other character, - unless they also appear within this list. */ -extern const char *rl_completer_quote_characters; - -/* List of quote characters which cause a word break. */ -extern const char *rl_basic_quote_characters; - -/* List of characters that need to be quoted in filenames by the completer. */ -extern const char *rl_filename_quote_characters; - -/* List of characters that are word break characters, but should be left - in TEXT when it is passed to the completion function. The shell uses - this to help determine what kind of completing to do. */ -extern const char *rl_special_prefixes; - -/* If non-zero, then this is the address of a function to call when - completing on a directory name. The function is called with - the address of a string (the current directory name) as an arg. It - changes what is displayed when the possible completions are printed - or inserted. The directory completion hook should perform - any necessary dequoting. This function should return 1 if it modifies - the directory name pointer passed as an argument. If the directory - completion hook returns 0, it should not modify the directory name - pointer passed as an argument. */ -extern rl_icppfunc_t *rl_directory_completion_hook; - -/* If non-zero, this is the address of a function to call when completing - a directory name. This function takes the address of the directory name - to be modified as an argument. Unlike rl_directory_completion_hook, it - only modifies the directory name used in opendir(2), not what is displayed - when the possible completions are printed or inserted. If set, it takes - precedence over rl_directory_completion_hook. The directory rewrite - hook should perform any necessary dequoting. This function has the same - return value properties as the directory_completion_hook. - - I'm not happy with how this works yet, so it's undocumented. I'm trying - it in bash to see how well it goes. */ -extern rl_icppfunc_t *rl_directory_rewrite_hook; - -/* If non-zero, this is the address of a function for the completer to call - before deciding which character to append to a completed name. It should - modify the directory name passed as an argument if appropriate, and return - non-zero if it modifies the name. This should not worry about dequoting - the filename; that has already happened by the time it gets here. */ -extern rl_icppfunc_t *rl_filename_stat_hook; - -/* If non-zero, this is the address of a function to call when reading - directory entries from the filesystem for completion and comparing - them to the partial word to be completed. The function should - either return its first argument (if no conversion takes place) or - newly-allocated memory. This can, for instance, convert filenames - between character sets for comparison against what's typed at the - keyboard. The returned value is what is added to the list of - matches. The second argument is the length of the filename to be - converted. */ -extern rl_dequote_func_t *rl_filename_rewrite_hook; - -/* Backwards compatibility with previous versions of readline. */ -#define rl_symbolic_link_hook rl_directory_completion_hook - -/* If non-zero, then this is the address of a function to call when - completing a word would normally display the list of possible matches. - This function is called instead of actually doing the display. - It takes three arguments: (char **matches, int num_matches, int max_length) - where MATCHES is the array of strings that matched, NUM_MATCHES is the - number of strings in that array, and MAX_LENGTH is the length of the - longest string in that array. */ -extern rl_compdisp_func_t *rl_completion_display_matches_hook; - -/* Non-zero means that the results of the matches are to be treated - as filenames. This is ALWAYS zero on entry, and can only be changed - within a completion entry finder function. */ -extern int rl_filename_completion_desired; - -/* Non-zero means that the results of the matches are to be quoted using - double quotes (or an application-specific quoting mechanism) if the - filename contains any characters in rl_word_break_chars. This is - ALWAYS non-zero on entry, and can only be changed within a completion - entry finder function. */ -extern int rl_filename_quoting_desired; - -/* Set to a function to quote a filename in an application-specific fashion. - Called with the text to quote, the type of match found (single or multiple) - and a pointer to the quoting character to be used, which the function can - reset if desired. */ -extern rl_quote_func_t *rl_filename_quoting_function; - -/* Function to call to remove quoting characters from a filename. Called - before completion is attempted, so the embedded quotes do not interfere - with matching names in the file system. */ -extern rl_dequote_func_t *rl_filename_dequoting_function; - -/* Function to call to decide whether or not a word break character is - quoted. If a character is quoted, it does not break words for the - completer. */ -extern rl_linebuf_func_t *rl_char_is_quoted_p; - -/* Non-zero means to suppress normal filename completion after the - user-specified completion function has been called. */ -extern int rl_attempted_completion_over; - -/* Set to a character describing the type of completion being attempted by - rl_complete_internal; available for use by application completion - functions. */ -extern int rl_completion_type; - -/* Set to the last key used to invoke one of the completion functions */ -extern int rl_completion_invoking_key; - -/* Up to this many items will be displayed in response to a - possible-completions call. After that, we ask the user if she - is sure she wants to see them all. The default value is 100. */ -extern int rl_completion_query_items; - -/* Character appended to completed words when at the end of the line. The - default is a space. Nothing is added if this is '\0'. */ -extern int rl_completion_append_character; - -/* If set to non-zero by an application completion function, - rl_completion_append_character will not be appended. */ -extern int rl_completion_suppress_append; - -/* Set to any quote character readline thinks it finds before any application - completion function is called. */ -extern int rl_completion_quote_character; - -/* Set to a non-zero value if readline found quoting anywhere in the word to - be completed; set before any application completion function is called. */ -extern int rl_completion_found_quote; - -/* If non-zero, the completion functions don't append any closing quote. - This is set to 0 by rl_complete_internal and may be changed by an - application-specific completion function. */ -extern int rl_completion_suppress_quote; - -/* If non-zero, readline will sort the completion matches. On by default. */ -extern int rl_sort_completion_matches; - -/* If non-zero, a slash will be appended to completed filenames that are - symbolic links to directory names, subject to the value of the - mark-directories variable (which is user-settable). This exists so - that application completion functions can override the user's preference - (set via the mark-symlinked-directories variable) if appropriate. - It's set to the value of _rl_complete_mark_symlink_dirs in - rl_complete_internal before any application-specific completion - function is called, so without that function doing anything, the user's - preferences are honored. */ -extern int rl_completion_mark_symlink_dirs; - -/* If non-zero, then disallow duplicates in the matches. */ -extern int rl_ignore_completion_duplicates; - -/* If this is non-zero, completion is (temporarily) inhibited, and the - completion character will be inserted as any other. */ -extern int rl_inhibit_completion; - -/* Applications can set this to non-zero to have readline's signal handlers - installed during the entire duration of reading a complete line, as in - readline-6.2. This should be used with care, because it can result in - readline receiving signals and not handling them until it's called again - via rl_callback_read_char, thereby stealing them from the application. - By default, signal handlers are only active while readline is active. */ -extern int rl_persistent_signal_handlers; - -/* Input error; can be returned by (*rl_getc_function) if readline is reading - a top-level command (RL_ISSTATE (RL_STATE_READCMD)). */ -#define READERR (-2) - -/* Definitions available for use by readline clients. */ -#define RL_PROMPT_START_IGNORE '\001' -#define RL_PROMPT_END_IGNORE '\002' - -/* Possible values for do_replace argument to rl_filename_quoting_function, - called by rl_complete_internal. */ -#define NO_MATCH 0 -#define SINGLE_MATCH 1 -#define MULT_MATCH 2 - -/* Possible state values for rl_readline_state */ -#define RL_STATE_NONE 0x000000 /* no state; before first call */ - -#define RL_STATE_INITIALIZING 0x0000001 /* initializing */ -#define RL_STATE_INITIALIZED 0x0000002 /* initialization done */ -#define RL_STATE_TERMPREPPED 0x0000004 /* terminal is prepped */ -#define RL_STATE_READCMD 0x0000008 /* reading a command key */ -#define RL_STATE_METANEXT 0x0000010 /* reading input after ESC */ -#define RL_STATE_DISPATCHING 0x0000020 /* dispatching to a command */ -#define RL_STATE_MOREINPUT 0x0000040 /* reading more input in a command function */ -#define RL_STATE_ISEARCH 0x0000080 /* doing incremental search */ -#define RL_STATE_NSEARCH 0x0000100 /* doing non-inc search */ -#define RL_STATE_SEARCH 0x0000200 /* doing a history search */ -#define RL_STATE_NUMERICARG 0x0000400 /* reading numeric argument */ -#define RL_STATE_MACROINPUT 0x0000800 /* getting input from a macro */ -#define RL_STATE_MACRODEF 0x0001000 /* defining keyboard macro */ -#define RL_STATE_OVERWRITE 0x0002000 /* overwrite mode */ -#define RL_STATE_COMPLETING 0x0004000 /* doing completion */ -#define RL_STATE_SIGHANDLER 0x0008000 /* in readline sighandler */ -#define RL_STATE_UNDOING 0x0010000 /* doing an undo */ -#define RL_STATE_INPUTPENDING 0x0020000 /* rl_execute_next called */ -#define RL_STATE_TTYCSAVED 0x0040000 /* tty special chars saved */ -#define RL_STATE_CALLBACK 0x0080000 /* using the callback interface */ -#define RL_STATE_VIMOTION 0x0100000 /* reading vi motion arg */ -#define RL_STATE_MULTIKEY 0x0200000 /* reading multiple-key command */ -#define RL_STATE_VICMDONCE 0x0400000 /* entered vi command mode at least once */ -#define RL_STATE_CHARSEARCH 0x0800000 /* vi mode char search */ -#define RL_STATE_REDISPLAYING 0x1000000 /* updating terminal display */ - -#define RL_STATE_DONE 0x2000000 /* done; accepted line */ - -#define RL_SETSTATE(x) (rl_readline_state |= (x)) -#define RL_UNSETSTATE(x) (rl_readline_state &= ~(x)) -#define RL_ISSTATE(x) (rl_readline_state & (x)) - -struct readline_state { - /* line state */ - int point; - int end; - int mark; - int buflen; - char *buffer; - UNDO_LIST *ul; - char *prompt; - - /* global state */ - int rlstate; - int done; - Keymap kmap; - - /* input state */ - rl_command_func_t *lastfunc; - int insmode; - int edmode; - char *kseq; - int kseqlen; - - int pendingin; - FILE *inf; - FILE *outf; - char *macro; - - /* signal state */ - int catchsigs; - int catchsigwinch; - - /* search state */ - - /* completion state */ - rl_compentry_func_t *entryfunc; - rl_compentry_func_t *menuentryfunc; - rl_compignore_func_t *ignorefunc; - rl_completion_func_t *attemptfunc; - char *wordbreakchars; - - /* options state */ - - /* hook state */ - - /* reserved for future expansion, so the struct size doesn't change */ - char reserved[64]; -}; - -extern int rl_save_state PARAMS((struct readline_state *)); -extern int rl_restore_state PARAMS((struct readline_state *)); - -#ifdef __cplusplus -} -#endif - -#endif /* _READLINE_H_ */ diff --git a/readline/readline.pc.in b/readline/readline.pc.in deleted file mode 100644 index a7f2cf3877..0000000000 --- a/readline/readline.pc.in +++ /dev/null @@ -1,12 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -includedir=@includedir@ - -Name: Readline -Description: Gnu Readline library for command line editing -URL: http://tiswww.cwru.edu/php/chet/readline/rltop.html -Version: @LIBVERSION@ -Requires.private: @TERMCAP_PKG_CONFIG_LIB@ -Libs: -L${libdir} -lreadline -Cflags: -I${includedir}/readline diff --git a/readline/readline/.gitignore b/readline/readline/.gitignore new file mode 100644 index 0000000000..be107bbad4 --- /dev/null +++ b/readline/readline/.gitignore @@ -0,0 +1,37 @@ +Makefile + +*.o +*.a +*.so +*.sl +*.dll + +config.cache +config.h +config.log +config.status + +doc/Makefile +examples/Makefile +shlib/Makefile + +examples/fileman +examples/hist_erasedups +examples/hist_purgecmd +examples/histexamp +examples/rl +examples/rl-callbacktest +examples/rlbasic +examples/rlcat +examples/rlevent +examples/rltest +examples/rlversion + +libhistory.so.* +libreadline.so.* + +*.dylib + +readline.pc + +stamp-h diff --git a/readline/readline/CHANGELOG b/readline/readline/CHANGELOG new file mode 100644 index 0000000000..18265ab105 --- /dev/null +++ b/readline/readline/CHANGELOG @@ -0,0 +1,1353 @@ +[Readline-specific changelog. Descriptions of changes to the source are + found in the bash changelog.] + + 6/9 + --- +Makefile.in + - quote value of ${INSTALL_DATA} when passing it to makes in + subdirectories + + 7/1 + --- +Makefile.in + - don't pass INSTALL_DATA to a make in the `doc' subdirectory; let + autoconf set the value itself in the Makefile + - removed a stray `-' before $(RANLIB) in the `install' recipe + +doc/Makefile.in + - add a VPATH assignment so the documentation is not remade if it's + already up-to-date in the distribution + +configure.in + - call AC_SUBST(LOCAL_LDFLAGS), since Makefile.in contains + @LOCAL_LDFLAGS@ + + 7/9 + --- + +config.h.in + - add define lines for STRUCT_WINSIZE_IN_SYS_IOCTL and + STRUCT_WINSIZE_IN_TERMIOS + +configure.in + - call BASH_STRUCT_WINSIZE to look for the definition of + `struct winsize' + + 7/17 + ---- +configure.in + - call AC_MINIX + +config.h.in + - add define line for AC_MINIX + + 7/18 + ---- +Makefile.in + - add `install-shared' and `uninstall-shared' targets + + 8/4 + --- +Makefile.in + - install and uninstall libhistory.a in the `install' and + `uninstall' targets + + 9/4 + --- +configure.in + - bumped LIBVERSION up to 2.1.1, indicating that this is patch + level 1 to release 2.1 + + + 9/16 + ---- +Makefile.in + - `make distclean' now descends into the `examples' subdir + +doc/Makefile.in + - the `distclean' and `maintainer-clean' targets should remove + Makefile + +examples/Makefile.in + - added the various clean targets + + 4/2 + --- +configure.in + - bumped LIBVERSION up to 2.2 + + 4/18 + ---- +[readline-2.2 released] + + 4/20 + ---- +Makefile.in + - make `libhistory.a' a dependency of `install' + - fixed a typo in the recipe for `install' that copied libreadline.a + to libhistory.old right after installing it + + 4/27 + ---- +doc/Makefile.in + - install {readline,history}.info out of the source directory if + they are not found in the current (build) directory -- only an + issue if the libraries are built in a different directory than + the source directory + + 5/1 + --- +support/shobj-conf + - script from the bash distribution to do shared object and library + configuration + +shlib/Makefile.in + - new directory and makefile to handle building shared versions of + libreadline and libhistory, controlled by support/shobj-conf + + 5/7 + --- +doc/Makefile.in + - set SHELL to /bin/sh, rather than relying on make to be correct + + 5/14 + ---- +savestring.c + - new file, moved from shell.c, for backwards compatibility + +Makefile.in, shlib/Makefile.in + - make sure savestring.c is compiled and added to libreadline and + libhistory + +[THERE ARE NO MORE #ifdef SHELL LINES IN THE C SOURCE FILES.] + + 5/15 + ---- +README + - updated description of shared library creation for the new scheme + +[THERE ARE NO MORE #ifdef SHELL LINES IN ANY OF THE SOURCE FILES.] + +Makefile.in + - bumped SHLIB_MAJOR up to 4 since we've augmented the library + API + - rlconf.h is now one of the installed headers, so applications can + find out whether things like vi-mode are available in the installed + libreadline + + 5/20 + ---- +configure.in + - changed RL_LIBRARY_VERSION to 4.0 to match the version of the + installed shared libraries + + 6/5 + --- +rlstdc.h + - new file + +Makefile.in + - rlstdc.h is now one of the installed headers + + 8/3 + --- +shlib/Makefile.in + - made the suffix rule that creates xx.so from xx.c write the + compiler output to `a.o', which is then mv'd to xx.so, because + some compilers (Sun WSpro 4.2, for example) don't allow any + suffixes other than `.o' for `cc -c' (not even `a.out') + + 9/15 + ---- + +Makefile.in + - AR and ARFLAGS are now substituted by configure, used in recipes + that build the libraries + +configure.in + - use AC_CHECK_PROG to check for ar + - set ARFLAGS if it has not already been set in the environment + + 10/5 + ---- +Makefile.in + - removed savestring.o from object file list + + 10/28 + ----- +shlib/Makefile.in + - don't use a fixed filename in the .c.so suffix rule to avoid + problems with parallel makes + + 12/21 + ----- +support/shlib-install + - new script to install shared readline and history libraries + +shlib/Makefile.in + - changed to call shlib-install for install and uninstall targets + +[readline-4.0-beta1 frozen] + + 12/22 + ----- +configure.in + - call AC_SUBST for SHOBJ_XLDFLAGS and SHLIB_LIBS + +shlib/Makefile.in + - SHOBJ_XLDFLAGS and SHLIB_LIBS are now substituted by configure + - add $(SHLIB_LIBS) at end of command line that builds the shared + libraries (currently needed only by AIX 4.2) + + 12/31 + ----- +MANIFEST, MANIFEST.doc + - the TOC html files are no longer generated and no longer part of + the distribution + + 2/18/1999 + --------- +configure.in + - set MAKE_SHELL to /bin/sh and substitute into the Makefiles + +Makefile.in,{doc,examples,shlib}/Makefile.in + - set SHELL from @MAKE_SHELL@ + +[readline-4.0 released] + + 3/11 + ---- +doc/Makefile.in + - removed references to HTMLTOC, since separate HTML table-of-contents + files are no longer created + +examples/Makefile.in + - remove `*.exe' in clean target for MS-DOS + +Makefile.in + - make `readline' target depend on ./libreadline.a + - configure now substitutes TERMCAP_LIB into Makefile.in + - use ${TERMCAP_LIB} instead of -ltermcap in recipe for `readline' + - clean target now removes readline and readline.exe in case they + get built + +configure.in + - use `pwd.exe' to set BUILD_DIR on MS-DOS DJGPP + + 3/15 + ---- +support/shlib-install + - Irix 5.x and Irix 6.x should install shared libraries like Solaris 2 + - changes for installing on hp-ux 1[01].x + + 3/23 + ---- +configure.in + - make sure that the $CC argument to shobj-conf is quoted + + 4/8 + --- + +xmalloc.h, rlprivate.h, rlshell.h + - new files + +Makefile.in,shlib/Makefile.in + - add dependencies on xmalloc.h, rlshell.h + - add xmalloc.h, rlprivate.h, rlshell.h to list of header files + +MANIFEST + - add xmalloc.h, rlprivate.h, rlshell.h + + 4/9 + --- +Makefile.in,shlib/Makefile.in + - add dependencies on rlprivate.h + + 4/13 + ---- +doc/Makefile.in + - add variable, PSDVI, which is the desired resolution of the + generated postscript files. Set to 300 because I don't have + any 600-dpi printers + - set LANGUAGE= before calling makeinfo, so messages are in English + - add rluserman.{info,dvi,ps,html} to appropriate variables + - add rules to create rluserman.{info,dvi,ps,html} + - install and uninstall rluserman.info, but don't update the directory + file in $(infodir) yet + +MANIFEST + - add doc/rluserman.{texinfo,info,dvi,ps,html} + + 4/30 + ---- +configure.in + - updated library version to 4.1 + + 5/3 + --- +configure.in + - SHLIB_MAJOR and SHLIB_MINOR shared library version numbers are + constructed from $LIBRARY_VERSION and substituted into Makefiles + + 5/5 + --- +support/shlib-install + - OSF/1 installs shared libraries like Solaris + +Makefile.in + - broke the header file install and uninstall into two new targets: + install-headers and uninstall-headers + - install and uninstall depend on install-headers and uninstall-headers + respectively + - changed install-shared and uninstall-shared targets to depend on + install-headers and uninstall-headers, respectively, so users may + choose to install only the shared libraries. I'm not sure about + the uninstall one yet -- maybe it should check whether or not + the static libraries are installed and not remove the header files + if they are + + 9/3 + --- +configure.in, config.h.in + - added test for memmove (for later use) + - changed version to 4.1-beta1 + + 9/13 + ---- +examples/rlfe.c + - Per Bothner's `rlfe' readline front-end program + +examples/Makefile.in + - added rules to build rlfe + + 9/21 + ---- +support/shlib-install + - changes to handle FreeBSD-3.x elf or a.out shared libraries, which + have different semantics and need different naming conventions + + 1/24/2000 + --------- +doc/Makefile.in + - remove *.bt and *.bts on `make clean' + + 2/4 + --- + + +configure.in + - changed LIBVERSION to 4.1-beta5 + + 3/17/2000 + --------- +[readline-4.1 released] + + 3/23 + ---- +Makefile.in + - remove the `-t' argument to ranlib in the install recipe; some + ranlibs don't have it and attempt to create a file named `-t' + + 3/27 + ---- +support/shlib-install + - install shared libraries unwritable by anyone on HP-UX + - changed symlinks to relative pathnames on all platforms + +shlib/Makefile.in + - added missing `includedir' assignment, substituted by configure + +Makefile.in + - added missing @SET_MAKE@ so configure can set $MAKE appropriately + +configure.in + - add call to AC_PROG_MAKE_SET + + 8/30 + ---- +shlib/Makefile.in + - change the soname bound into the shared libraries, so it includes + only the major version number. If it includes the minor version, + programs depending on it must be rebuilt (which may or may not be + a bad thing) + + 9/6 + --- +examples/rlfe.c + - add -l option to log input and output (-a option appends to logfile) + - add -n option to set readline application name + - add -v, -h options for version and help information + - change a few things because getopt() is now used to parse arguments + + 9/12 + ---- +support/shlib-install + - fix up the libname on HPUX 11 + + 10/18 + ----- +configure.in + - changed library version to 4.2-alpha + + 10/30 + ----- +configure.in + - add -fsigned-char to LOCAL_CFLAGS for Linux running on the IBM + S/390 + +Makefile.in + - added new file, rltypedefs.h, installed by default with `make install' + + 11/2 + ---- +compat.c + - new file, with backwards-compatibility function definitions + +Makefile.in,shlib/Makefile.in + - make sure that compat.o/compat.so are built and linked apppropriately + +support/shobj-conf + - picked up bash version, which means that shared libs built on + linux and BSD/OS 4.x will have an soname that does not include + the minor version number + + 11/13 + ----- +examples/rlfe.c + - rlfe can perform filename completion for relative pathnames in the + inferior process's context if the OS supports /proc/PID/cwd (linux + does it OK, Solaris is slightly warped, none of the BSDs have it) + + 11/17/2000 + ---------- +[readline-4.2-alpha released] + + 11/27 + ----- +Makefile.in,shlib/Makefile.in + - added dependencies for rltypedefs.h + +shlib/Makefile.in + - changed dependencies on histlib.h to $(topdir)/histlib.h + + 1/22 + ---- +configure.in + - changed release version to 4.2-beta + + 2/2 + --- +examples/Makefile.in + - build histexamp as part of the examples + + 2/5 + --- +doc/Makefile.in + - don't remove the dvi, postscript, html, info, and text `objects' + on a `make distclean', only on a `make maintainer-clean' + + 3/6 + --- +doc/history.{0,3}, doc/history_3.ps + - new manual page for history library + +doc/Makefile.in + - rules to install and uninstall history.3 in ${man3dir} + - rules to build history.0 and history_3.ps + + 4/2 + --- +configure.in + - changed LIBVERSION to `4.2' + + 4/5 + --- +[readline-4.2 frozen] + + 4/9 + --- +[readline-4.2 released] + + 5/2 + --- +Makefile.in,{doc,examples,shlib}/Makefile.in + - added support for DESTDIR installation root prefix, to support + building packages + +doc/Makefile.in + - add an info `dir' file entry for rluserman.info on `make install' + - change man1ext to `.1' and man3ext to `.3' + - install man pages with a $(man3ext) extension in the target directory + - add support for installing html documentation if `htmldir' has a + value + +Makefile.in + - on `make install', install from the `shlib' directory, too + - on `make uninstall', uninstall in the `doc' and `shlib' + subdirectories, too + +support/shlib-install + - add `freebsdelf*', `freebsdaout*', Hurd, `sysv4*', `sysv5*', `dgux*' + targets for symlink creation + + 5/7 + --- +configure.in, config.h.in + - check for , define HAVE_LIMITS_H if found + + 5/8 + --- +aclocal.m4 + - pick up change to BASH_CHECK_LIB_TERMCAP that adds check for + libtinfo (termcap-specific portion of ncurses-5.2) + + 5/9 + --- +configure.in + - call AC_C_CONST to find out whether or not the compiler supports + `const' + +config.h.in + - placeholder for `const' define, if any + + 5/10 + ---- +configure.in + - fix AC_CHECK_PROG(ar, ...) test to specify right value for the + case where ar is not found; should produce a better error message + + 5/14 + ---- +configure.in,config.h.in + - check for vsnprintf, define HAVE_VSNPRINTF if found + + 5/21 + ---- +configure.in, config.h.in + - add checks for size_t, ssize_t + + 5/30 + ---- +configure.in + - update autoconf to version 2.50, use in AC_PREREQ + - changed AC_INIT to new flavor + - added AC_CONFIG_SRCDIR + - AC_CONFIG_HEADER -> AC_CONFIG_HEADERS + - call AC_C_PROTOTYPES + - AC_RETSIGTYPE -> AC_TYPE_SIGNAL + + 8/22 + ---- +configure.in + - updated the version number to 4.2a + +Makefile.in,shlib/Makefile.in + - make sure tilde.o is built -DREADLINE_LIBRARY when being built as + part of the standalone library, so it picks up the right include + files + + 8/23 + ---- +support/shlib-install + - support for Darwin/MacOS X shared library installation + + 9/24 + ---- +examples/readlinebuf.h + - a new file, a C++ streambuf interface that uses readline for I/O. + Donated by Dimitris Vyzovitis + + 10/9 + ---- +configure.in + - replaced call to BASH_HAVE_TIOCGWINSZ with AC_HEADER_TIOCGWINSZ + +[readline-4.2a-beta1 frozen] + + 10/15 + ----- +configure.in, config.h.in + - check for , define HAVE_MEMORY_H if found + - check for , define HAVE_STRINGS_H if found + + 10/18 + ----- +configure.in, config.h.in + - check for isascii, define HAVE_ISASCII if found + +configure.in + - changed the macro names from bash as appropriate: + BASH_SIGNAL_CHECK -> BASH_SYS_SIGNAL_VINTAGE + BASH_REINSTALL_SIGHANDLERS -> BASH_SYS_REINSTALL_SIGHANDLERS + BASH_MISC_SPEED_T -> BASH_CHECK_SPEED_T + + 10/22 + ----- +configure.in + - check for isxdigit with AC_CHECK_FUNCS + +config.h.in + - new define for HAVE_ISXDIGIT + + 10/29 + ----- +configure.in, config.h.in + - check for strpbrk with AC_CHECK_FUNCS, define HAVE_STRPBRK if found + + 11/1 + ---- +Makefile.in + - make sure DESTDIR is passed to install and uninstall makes in + subdirectories + - when saving old copies of installed libraries, make sure we use + DESTDIR for the old installation tree + +[readline-4.2a-rc1 frozen] + + 11/2 + ---- +Makefile.in, shlib/Makefile.in + - don't put -I$(includedir) into CFLAGS + + 11/15 + ----- +[readline-4.2a released] + + 11/20 + ----- +examples/rlcat.c + - new file + +examples/Makefile.in + - changes for rlcat + + 11/28 + ----- +configure.in + - default TERMCAP_LIB to -lcurses if $prefer_curses == yes (as when + --with-curses is supplied) + +examples/Makefile.in + - substitute @LDFLAGS@ in LDFLAGS assignment + + 11/29 + ----- +config.h.in + - add necessary defines for multibyte include files and functions + - add code to define HANDLE_MULTIBYTE if prerequisites are met + +configure.in + - call BASH_CHECK_MULTIBYTE + + 12/14 + ----- +config.h.in + - add #undef PROTOTYPES, filled in by AC_C_PROTOTYPES + + 12/17 + ----- +config.h.in + - moved HANDLE_MULTIBYTE code to rlmbutil.h + +rlmbutil.h, mbutil.c + - new files + +Makefile.in, shlib/Makefile.in + - added rules for mbutil.c + + 12/20 + ----- +configure.in + - added --enable-shared, --enable-static options to configure to + say which libraries are built by default (both default to yes) + - if SHLIB_STATUS == 'unsupported', turn off default shared library + building + - substitute new STATIC_TARGET, SHARED_TARGET, STATIC_INSTALL_TARGET, + and SHARED_INSTALL_TARGET + +Makefile.in + - `all' target now depends on (substituted) @STATIC_TARGET@ and + @SHARED_TARGET@ + - `install' target now depends on (substituted) @STATIC_INSTALL_TARGET@ + and @SHARED_INSTALL_TARGET@ + +INSTALL, README + - updated with new info about --enable-shared and --enable-static + + 1/10/2002 + --------- +configure.in + - bumped the library version number to 4.3 + + 1/24 + ---- +Makefile.in,shlib/Makefile.in + - changes for new file, text.c, with character and text handling + functions from readline.c + + 2/20 + ---- +{configure.config.h}.in + - call AC_C_CHAR_UNSIGNED, define __CHAR_UNSIGNED__ if chars are + unsigned by default + + 5/20 + ---- +doc/Makefile.in + - new maybe-clean target that removes the generated documentation if + the build directory differs from the source directory + - distclean target now depends on maybe-clean + + 7/17 + ---- +[readline-4.3 released] + + 7/18 + ---- +shlib/Makefile.in + - fix bad dependency: text.so: terminal.c, make it depend on text.c + + 8/7 + --- +support/shlib-install + - break `linux' out into its own stanza: it seems that linux + distributions are all moving to the following scheme: + + libreadline.so.4.3 installed version + libreadline.so.4 -> libreadline.so.4.3 symlink + libreadline.so -> libreadline.so.4 symlink + + 10/29 + ----- +support/shlib-install + - change INSTALL_LINK[12] to use `&&' instead of `;' so it only + tries the link if the cd succeeds; put ${echo} in there, too + - use $LN instead of `ln -s' so it works on machines without symlinks + - change special linux stanza to use cd before ln also + - change to use $INSTALL_LINK1 and $INSTALL_LINK2 appropriately + instead of explicit commands in various stanzas + + 2/1 + --- +config.h.in + - add HAVE_MBRTOWC and HAVE_MBRLEN + - add NO_MULTIBYTE_SUPPORT for new configure argument + - add STDC_HEADERS + +configure.in + - new argument --enable-multibyte (enabled by default), allows + multibyte support to be turned off even on systems that support it + - add check for ansi stdc headers with call to AC_HEADER_STDC + + 2/3 + --- +configure.in + - add call to BASH_FUNC_CTYPE_NONASCII + +config.h.in + - add CTYPE_NON_ASCII + + 2/20 + ---- + +doc/manvers.texinfo + - renamed to version.texi to match other GNU software + - UPDATE-MONTH variable is now `UPDATED-MONTH' + +doc/{hist,rlman,rluserman}.texinfo + - include version.texi + +doc/{rltech,rluser,hstech,hsuser}.texi + - changed the suffix from `texinfo' to `texi' + +doc/Makefile.in + - made appropriate changes for {{rl,hs}tech,{rl,hs}user}.texi + +doc/{rlman,rluserman}.texinfo + - changed the suffix from `texinfo' to `texi' + +doc/hist.texinfo + - renamed to history.texi to be more consistent + + 6/11 + ---- +shlib/Makefile.in + - have configure substitute value of `@LDFLAGS@' into the assignment + to SHLIB_XLDFLAGS + + 6/16 + ---- +configure.in + - readline and history libraries are now at version 5.0 + + 8/18 + ---- +support/shlib-install + - support for FreeBSD-gnu (from Robert Millan) + + 12/4 + ---- +Makefile.in + - add variables for localedir and the PACKAGE_* variables, auto-set + by configure + + 12/9 + ---- +Makefile.in + - use mkinstalldirs instead of mkdirs + + 4/22 + ---- +Makefile.in + - separate doc install/uninstall out into two new targets: + install-doc and uninstall-doc + - make install-doc and uninstall-doc prerequisites of appropriate + install and uninstall targets + +examples/rl-fgets.c + - new example from Harold Levy that wraps fgets replacement functions + that call readline in a shared library that can be interposed with + LD_PRELOAD + + 7/27 + ---- +[readline-5.0 released] + + 11/15 + ----- +examples/rlfe/{ChangeLog,Makefile.in,README,config.h.in,configure,configure.in,extern.h,os.h,pty.c,rlfe.c,screen.h} + - new version of rlfe, rlfe-0.4, from Per Bothner; now a standalone + application + + 11/16 + ----- +shlib/Makefile.in + - substitute TERMCAP_LIB in from configure + +configure.in + - if SHLIB_LIBS doesn't include a termcap library (curses, ncurses, + termcap, termlib), append the value of $TERMCAP_LIB to it + + 11/30 + ----- +configure.in + - take out change from 11/16; it doesn't work for some systems (e.g., + SunOS 4.x and Solaris 2.6) + - add support for --enable-purify configure argument + - pass TERMCAP_LIB in environment when calling shobj-conf + +examples/Makefile.in + - add support for building examples with purify + + 1/23/2005 + --------- +configure.in + - set BUILD_DIR to contain backslashes to escape any spaces in the + directory name -- this is what make will accept in targets and + prerequisites, so it's better than trying to use double quotes + + 2/25 + ---- +configure.in + - change check for sys/ptem.h to include sys/stream.h if present, to + avoid the `present but cannot be compiled' messages on Solaris and + SVR4.2 (does anyone still use SVR4.2?) + + 5/7 + --- +configure.in + - add cross-compiling support from the bash configure.in, which cygwin + and mingw have apparently adopted + - add check for pwd.h, fcntl.h + - add checks for fcntl, kill system calls + - add checks for getpw{ent,nam,uid} C library functions + - pass a compile-time option through to Makefiles if cross-compiling + +config.h.in + - add HAVE_PWD_H for , HAVE_FCNTL_H for + - add HAVE_FCNTL, HAVE_KILL for respective system calls + - add HAVE_GETPW{ENT,NAM,UID} for passwd functions + +Makefile.in,shlib/Makefile.in + - @CROSS_COMPILE@ is substituted into DEFS (equal to -DCROSS_COMPILING + if bash is being cross-compiled) + + 8/2 + --- +examples/Makefile.in + - use $(READLINE_LIB) instead of -lreadline to get around MacOS X 10.4's + preference for (incompatible) shared libraries over static libraries + in the load path + + 8/11 + ---- +support/shobj-conf + - new variable: SHLIB_LIBPREF, prefix for shared library name (defaults + to `lib' + - new variable: SHLIB_DLLVERSION, used on Cygwin to set the library + version number + - new variable: SHLIB_DOT, separator character between library name and + suffix and version information (defaults to `.') + - new stanza for cygwin to generate windows-compatible dll + +support/shlib-install + - add new option `-b bindir' for systems like cygwin/windows that + require it + - new stanza for cygwin that installs a dll into $bindir and an implied + link library into $libdir + +configure.in + - substitute new variables from shobj-conf + +shlib/Makefile.in + - substitute bindir, SHLIB_DOT, SHLIB_LIBPREF, SHLIB_DLLVERSION from + configure + - pass `-b $(bindir)' to shlib-install for install and uninstall targets + - library names now use $SHLIB_LIBPREF and $SHLIB_DOT + +INSTALL,README + - document new SHLIB_DOT, SHLIB_LIBPREF, and SHLIB_DLLVERSION variables + + 10/4 + ---- +[readline-5.1-beta1 frozen] + + 12/1 + ---- +configure.in + - changed release status to `release' + +[readline-5.1 frozen] + + 12/9 + ---- +[readline-5.1 released] + + 12/14 + ----- +examples/rlfe/Makefile.in + - add @LIBS@ to LIBS assignment to pick up extra libraries from + configure + + 1/3/2006 + -------- +support/shlib-install + - Install shared libraries with execute bit set on Linux + + 6/9 + --- +[readline-5.2-alpha frozen] + + 6/26 + ---- +configure.in + - set CROSS_COMPILE to the empty string by default, so we don't inherit + a random value from the environment + + 7/8 + --- +[readline-5.2-alpha released] + + +[readline-5.2-beta released] + + 9/12 + ---- +config.h.in + - add defines for wcscoll, iswctype, iswupper, iswlower, towupper, + towlower functions + - replace define for wctomb with one for wcrtomb + - add defines for wchar_t, wint_t, wctype_t types + + 10/11 + ----- +[readline-5.2 released] + + 11/9 + ---- +examples/rlfe/{configure.in,Makefile.in,config.h.in,rlfe.c,pty.c} + - portability fixes from Mike Frysinger + + 11/21 + ----- +Makefile.in + - add `install-examples' and `uninstall-examples' targets + +examples/Makefile.in + - add correct variables to build examples on Windows + - add appropriate rules to install and uninstall example sources in + $(datadir)/readline + + 11/27 + ----- +config.h.in + - move #undef of HAVE_STRCOLL out of config.h.in, since autoconf tries + to substitute it based on configure tests + + 4/27/2007 + --------- +examples/autoconf + - new directory with example autoconf macros to detect readline and + return information about the installed version + + 6/13 + ---- +support/shlib-install + - changes to support AIX 5.x shared library installation + + 3/20/2008 + --------- +support/shlib-install + - add support for NetBSD and Interix shared library installation + + 4/22 + ---- +support/wcwidth.c + - updated implementation from 2007-05 + + 7/18 + ---- +support/shlib-install + - support for mingw32, contributed by Carlo Bramix + + 8/4 + --- +configure.in + - changed to readline-6.0 + + 8/18 + ---- +support/config.{guess,sub} + - updated to newer versions from autoconf-2.62 distribution + + 3/5/2009 + -------- +support/shlib-install + - take a new -V host_vendor argument + - add ${host_vendor} to string tested in case statement for symlink + creation section + - add support for FreeBSD/gentoo, which uses Linux library naming + scheme + - change FreeBSD symlink rules, since FreeBSD 7+ has only ELF shared + libraries. DragonflyBSD rules are the same. Fix from Timothy + Redaelli + +shlib/Makefile.in + - add definition of host_vendor, substituted by configure + - add -V host_vendor argument to all invocations of shlib-install. + Fix from Timothy Redaelli + + 3/10 + ---- +configure.in + - add call to AC_SYS_LARGEFILE for readdir and largefile support on + Linux + +config.h.in + - add _FILE_OFFSET_BITS define + + 4/19 + ---- +Makefile.in + - add targets for making and installing documentation required by GNU + coding standards. Fix from Joseph Myers + +posixselect.h + - pick up from bash. Inspired by Mike Frysinger + + 10/28 + ----- +support/shlib-install + - decrease the default version of FreeBSD that installs shared libraries + to 4.x. Advice from Peter Jeremy + + 12/18 + ----- +[readline-6.1-rc1 released] + + 12/23 + ----- +doc/Makefile.in + - make sure $(topdir) is not ".." before removing all of the formatted + documentation in `make distclean'. $(topdir) is set to `..' if + readline is being built in the source directory. Fixes problem + noticed by THOUMIN Damien + + 12/29 + ----- +[readline-6.1 frozen] + + 2/5/2010 + -------- +examples/Makefile.in + - make sure to install example C files using $(srcdir)/$$f in case + we're building outside the source directory. Bug report and fix + from Peter Breitenlohner + + 7/25 + ---- +xfree.c + - new file with xfree() implementation, moved from xmalloc.c + + 12/28 + ----- +{examples,shlib}/Makefile.in + - Cygwin-based changes from Eric Blake + + 3/26/2011 + --------- +Makefile.in + - don't ignore failures when building, installing, or cleaning in + the shlib subdirectory. Sample patch from Mike Frysinger + + +shlib/Makefile.in + - split the install and uninstall targets into install-supported and + install-unsupported targets that depend on the value of + SHLIB_STATUS + + 4/2 + --- +{,shlib}/Makefile.in + - add dependency for callback.o/callback.so on xmalloc.h. From + Jan Kratochvil + +{,doc,examples,shlib}/Makefile.in + - fix typo: htm target should be html. From Jan Kratochvil + + - remove `.' from VPATH. From Jan Kratochvil + + +examples/rlfe/configure.in + - quote AC_PROGRAM_SOURCE. From Jan Kratochvil + + + 5/17 + ---- +config.h.in + - WCWIDTH_BROKEN: new define, picked up from bash, defined on systems + where wcwidth returns 1 for Unicode combining characters + + 11/28 + ----- +support/shlib-install + - make sure solaris2 systems make the installed shared library + executable. ldd warns about it otherwise. Bug and fix from + Tim Mooney + +examples/hist_erasedups.c + - new example program, shows how to erase duplicates from the history + list + +examples/hist_purgecmd.c + - new example program, shows how to remove all entries matching a + string or pattern from the history list + + 1/12/2012 + --------- +colors.[ch],parse-colors.[ch]} + - new files, part of color infrastructure support + +Makefile.in,shlib/Makefile.in + - arrange to have colors.o and parse-colors.o added to library + (static and shared versions) + +{configure,config.h}.in + - check for stdbool.h, define HAVE_STDBOOL_H if found + +rldefs.h + - COLOR_SUPPORT: if defined, compile in colors.c and parse-colors.c + for color support + + 1/18 + ---- + +{configure,config.h}.in + - new check: check for AUDIT_USER_TTY defined in , + define HAVE_DECL_AUDIT_USER_TTY if both are found + + 8/7 + --- +configure.in + - AC_CANONICAL_BUILD: call to set the build_xxx variables + - use $build_os instead of $host_os to decide when DJGPP should run + `pwd.exe' to figure out the build directory. Report and fix from + Yao Qi + + 8/29 + ---- +configure.ac + - new name for configure.in + +MANIFEST,Makefile.in + - configure.in -> configure.ac + + 1/5/2013 + -------- +configure.ac + - move version number up to 6.3 + + 1/31 + ---- +configure.ac + - use AC_CHECK_TOOL instead of AC_CHECK_PROG to check for ar, since it + will find $host-prefixed versions of utilities. Report and fix from + Mike Frysinger + + 3/4 + --- +Makefile.in + - PACKAGE_TARNAME, docdir: new variables substituted by autoconf + - OTHER_DOCS,OTHER_INSTALLED_DOCS: new variables with auxiliary + documentation files to be installed into $(docdir) + - install: add new rule to install $(OTHER_DOCS) + - uninstall: add new rule to uninstall $(docdir)/$(OTHER_INSTALLED_DOCS) + + 4/29 + ---- +Makefile.in + - installdirs: make sure to create $(DESTDIR)$(docdir). Report from + + + 1/27/2014 + --------- +Makefile.in + - install-examples: should not depend on `shared', since the examples + themselves are not built using shared libraries. Report from + + +support/shobj-conf + - [from bash] darwin: changed the install_name embedded into the + shared library to contain only the major version number, not the + minor one. The idea is that the minor versions should all be API/ABI + compatible, and it is better to link automatically with the latest + one. Idea from Max Horn + + 2/26/2014 + --------- +[readline-6.3 released] + + 3/14 + ---- +shlib/Makefile.in + - fix typo in dependency list for vi_mode.so: it should not depend on + just $(topdir). Report and fix from Natanael Copa + + + 4/15 + ---- +{.,shlib,examples}/Makefile.in + - make sure $(INCLUDES) appears before $(CPPFLAGS) in the various + CFLAGS assignments so readline looks in its own source and build + directories (INCLUDES) before some directories specified by the + user or builder (CPPFLAGS). Report and fix from Max Horn + + + 6/2 + --- +config.h.in + - use correct symbols: HAVE_STRUCT_DIRENT_D_INO, HAVE_STRUCT_DIRENT_D_FILENO + HAVE_STRUCT_DIRENT_D_NAMLEN. They don't really matter, but they are + what posixdir.h looks for. Report from Ross Burton + + 6/11 + ---- +readline.pc.in + - new file, config file for pkgconfig. Patch to add from Jirka Klimes + + +{MANIFEST,configure.ac,Makefile.in} + - readline.pc: changes to create file for pkgconfig + + 10/13 + ----- +doc/Makefile.in + - readline.pdf, history.pdf, rluserman.pdf: use texi2dvi --pdf to generate + these. Suggestion from Siep Kroonenberg + + 11/29 + ----- +config.h.in + - HAVE_PSELECT: define if pselect(2) available + +configure.ac + - check for pselect(2), define HAVE_PSELECT if found + + 12/29 + ----- +configure.ac + - bump version number up to 6.4 + + 1/6/2015 + -------- +configure.ac,config.h.in + - look for ncurses/termcap.h, define HAVE_NCURSES_TERMCAP_H + + 4/20 + ---- +configure.ac + - add template definitions set by AC_USE_SYSTEM_EXTENSIONS from a report + from Andreas Schwab + + 4/24 + ---- +configure.ac,config.h.in + - add check for sys/ioctl.h to AC_CHECK_HEADERS, define HAVE_SYS_IOCTL_H + if found + + 5/29 + ---- +configure.ac + - bump library version to 7.0 because of addition of rl_callback_sigcleanup + + 8/26 + ---- +configure.ac,Makefile.in,examples/Makefile.in + - remove references to purify + + 11/21 + ----- +configure.ac,config.h.in + - fnmatch: check for libc function, define HAVE_FNMATCH if found. Now + used by vi-mode history search functions + + 7/12 + ---- +Makefile.in,examples/Makefile.in + - add support for building with address sanitizer, using new target + `asan' + + 4/23/2018 + --------- +configure.ac + - TERMCAP_PKG_CONFIG_LIB: new variable, defined from TERMCAP_LIB, + defaults to termcap + +readline.pc.in + - change Requires.private to use TERMCAP_PKG_CONFIG_LIB instead of + hardcoded `tinfo'. Report and fix from Thomas Petazzoni + + + 5/4 + --- +Makefile.in + - new targets to install and uninstall the `readline.pc' pkgconfig + file + - install-{static,shared}: add install-pc to the list of prereqs + - uninstall{,-shared}: add uninstall-pc to list of prereqs. Change + from Thomas Petazzoni + +configure.ac,Makefile.in + - add new configure option to optionally disable installing the + source code examples. From Thomas Petazzoni + + 5/23 + ---- +Makefile.in + - install-pc: make sure we install readline.pc into an existing + pkgconfig directory. Report from ilove zfs + + 5/24 + ---- +Makefile.in + - installdirs: create $(pkgconfigdir) if it doesn't exist diff --git a/readline/readline/CHANGES b/readline/readline/CHANGES new file mode 100644 index 0000000000..09eab6ee03 --- /dev/null +++ b/readline/readline/CHANGES @@ -0,0 +1,1704 @@ +This document details the changes between this version, readline-8.0, and the +previous version, readline-7.0. + +1. Changes to Readline + +a. Added a guard to prevent nested macros from causing an infinite expansion + loop. + +b. Instead of allocating enough history list entries to hold the maximum list + size, cap the number allocated initially. + +c. Added a strategy to avoid allocating huge amounts of memory if a block of + history entries without timestamps occurs after a block with timestamps. + +d. Added support for keyboard timeouts when an ESC character is the last + character in a macro. + +e. There are several performance improvements when in a UTF-8 locale. + +f. Readline does a better job of preserving the original set of blocked + signals when using pselect() to wait for input. + +g. Fixed a bug that caused multibyte characters in macros to be mishandled. + +h. Fixed several bugs in the code that calculates line breaks when expanding + prompts that span several lines, contain multibyte characters, and contain + invisible character seqeuences. + +i. Fixed several bugs in cursor positioning when displaying lines with prompts + containing invisible characters and multibyte characters. + +j. When performing case-insensitive completion, Readline no longer sorts the + list of matches unless directed to do so. + +k. Fixed a problem with key sequences ending with a backslash. + +l. Fixed out-of-bounds and free memory read errors found via fuzzing. + +m. Fixed several cases where the mark was set to an invalid value. + +n. Fixed a problem with the case-changing operators in the case where the + lower and upper case versions of a character do not have the same number + of bytes. + +o. Handle incremental and non-incremental search character reads returning EOF. + +p. Handle the case where a failing readline command at the end of a multi-key + sequence could be misinterpreted. + +q. The history library now prints a meaningful error message if the history + file isn't a regular file. + +r. Fixed a problem with vi-mode redo (`.') on a command when trying to replace + a multibyte character. + +s. The key binding code now attempts to remove a keymap if a key unbinding + leaves it empty. + +t. Fixed a line-wrapping issue that caused problems for some terminal + emulators. + +u. If there is a key bound to the tty's VDISCARD special character, readline + disables VDISCARD while it is active. + +v. Fixed a problem with exiting bracketed paste mode on terminals that assume + the bracketed paste mode character sequence contains visible characters. + +w. Fixed a bug that could cause a key binding command to refer to an + uninitialized variable. + +x. Added more UTF-8-specific versions of multibyte functions, and optimized + existing functions if the current locale uses UTF-8 encoding. + +y. Fixed a problem with bracketed-paste inserting more than one character and + interacting with other readline functions. + +z. Fixed a bug that caused the history library to attempt to append a history + line to a non-existent history entry. + +aa. If using bracketed paste mode, output a newline after the \r that is the + last character of the mode disable string to avoid overwriting output. + +bb. Fixes to the vi-mode `b', `B', `w', `W', `e', and `E' commands to better + handle multibyte characters. + +cc. Fixed a redisplay problem that caused an extra newline to be generated on + accept-line when the line length is exactly the screenwidth. + +dd. Fixed a bug with adding multibyte characters to an incremental search + string. + +ee. Fixed a bug with redoing text insertions in vi mode. + +ff. Fixed a bug with pasting text into an incremental search string if bracketed + paste mode is enabled. ESC cannot be one of the incremental search + terminator characters for this to work. + +gg. Fixed a bug with anchored search patterns when performing searches in vi + mode. + +2. New Features in Readline + +a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as + Posix specifies (uses fnmatch(3) if available). + +b. There are new `next-screen-line' and `previous-screen-line' bindable + commands, which move the cursor to the same column in the next, or previous, + physical line, respectively. + +c. There are default key bindings for control-arrow-key key combinations. + +d. A negative argument (-N) to `quoted-insert' means to insert the next N + characters using quoted-insert. + +e. New public function: rl_check_signals(), which allows applications to + respond to signals that readline catches while waiting for input using + a custom read function. + +f. There is new support for conditionally testing the readline version in an + inputrc file, with a full set of arithmetic comparison operators available. + +g. There is a simple variable comparison facility available for use within an + inputrc file. Allowable operators are equality and inequality; string + variables may be compared to a value; boolean variables must be compared to + either `on' or `off'; variable names are separated from the operator by + whitespace. + +h. The history expansion library now understands command and process + substitution and extended globbing and allows them to appear anywhere in a + word. + +i. The history library has a new variable that allows applications to set the + initial quoting state, so quoting state can be inherited from a previous + line. + +j. Readline now allows application-defined keymap names; there is a new public + function, rl_set_keymap_name(), to do that. + +k. The "Insert" keypad key, if available, now puts readline into overwrite + mode. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-7.0, and the +previous version, readline-6.3. + +1. Changes to Readline + +a. A bug that caused vi-mode `.' to be unable to redo `c', `d', and `y' + commands with modifiers was fixed. + +b. Fixed a bug that caused callback mode to dump core when reading a + multiple-key sequence (e.g., arrow keys). + +c. Fixed a bug that caused the redisplay code to erase some of the line when + using horizontal scrolling with incremental search. + +d. Readline's input handler now performs signal processing if read(2) is + interrupted by SIGALRM or SIGVTALRM. + +e. Fixed a problem with revert-all-at-newline freeing freed memory. + +f. Clarified the documentation for the history_quotes_inhibit_expansion + variable to note that it inhibits scanning for the history comment + character and that it only affects double-quoted strings. + +g. Fixed an off-by-one error in the prompt printed when performing searches. + +h. Use pselect(2), if available, to wait for input before calling read(2), so + a SIGWINCH can interrupt it, since it doesn't interrupt read(2). + +i. Some memory leaks caused by signals interrupting filename completion have + been fixed. + +j. Reading EOF twice on a non-empty line causes EOF to be returned, rather + than the partial line. This can cause partial lines to be executed on + SIGHUP, for example. + +k. Fixed a bug concerning deleting multibyte characters from the search + string while performing an incremental search. + +l. Fixed a bug with tilde expanding directory names in filename completion. + +m. Fixed a bug that did not allow binding sequences beginning with a `\'. + +n. Fixed a redisplay bug involving incorrect line wrapping when the prompt + contains a multibyte character in the last screen column. + +o. Fixed a bug that caused history expansion to disregard characters that are + documented to delimit a history event specifier without requiring `:'. + +p. Fixed a bug that could cause reading past the end of a string when reading + the value when binding the set of isearch terminators. + +q. Fixed a bug that caused readline commands that depend on knowing which + key invoked them to misbehave when dispatching key sequences that are + prefixes of other key bindings. + +r. Paren matching now works in vi insert mode. + +s. Colored completion prefixes are now displayed using a different color, less + likely to collide with files. + +t. Fixed a bug that caused vi-mode character search to misbehave when + running in callback mode. + +u. Fixed a bug that caused output to be delayed when input is coming from a + macro in vi-mode. + +v. Fixed a bug that caused the vi-mode `.' command to misbehave when redoing + a multi-key key sequence via a macro. + +w. Fixed a bug that caused problems with applications that supply their own + input function when performing completion. + +x. When read returns -1/EIO when attempting to read a key, return an error + instead of line termination back to the caller. + +y. Updated tty auditing feature based on patch from Red Hat. + +z. Fixed a bug that could cause the history library to crash on overflows + introduced by malicious editing of timestamps in the history file. + +aa. The history file writing functions only attempt to create and use a backup + history file if the history file exists and is a regular file. + +bb. Fixed an out-of-bounds read in readline's internal tilde expansion interface. + +cc. Fixed several redisplay bugs with prompt strings containing multibyte + and non-visible characters whose physical length is longer than the screen + width. + +dd. Fixed a redisplay bug with prompt strings containing invisible characters + whose physical length exceeds the screen width and using incremental search. + +ee. Readline prints more descriptive error messages when it encounters errors + while reading an inputrc file. + +ff. Fixed a bug in the character insertion code that attempts to optimize + typeahead when it reads a character that is not bound to self-insert and + resets the key sequence state. + +gg. When refreshing the line as the result of a key sequence, Readline attempts + to redraw only the last line of a multiline prompt. + +hh. Fixed an issue that caused completion of git commands to display + incorrectly when using colored-completion-prefix. + +ii. Fixed several redisplay bugs having to do with multibyte characters and + invisible characters in prompt strings. + +jj. Fixed a bug that caused mode strings to be displayed incorrectly if the + prompt was shorter than the mode string. + +2. New Features in Readline + +a. The history truncation code now uses the same error recovery mechansim as + the history writing code, and restores the old version of the history file + on error. The error recovery mechanism handles symlinked history files. + +b. There is a new bindable variable, `enable-bracketed-paste', which enables + support for a terminal's bracketed paste mode. + +c. The editing mode indicators can now be strings and are user-settable + (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string' + variables). Mode strings can contain invisible character sequences. + Setting mode strings to null strings restores the defaults. + +d. Prompt expansion adds the mode string to the last line of a multi-line + prompt (one with embedded newlines). + +e. There is a new bindable variable, `colored-completion-prefix', which, if + set, causes the common prefix of a set of possible completions to be + displayed in color. + +f. There is a new bindable command `vi-yank-pop', a vi-mode version of emacs- + mode yank-pop. + +g. The redisplay code underwent several efficiency improvements for multibyte + locales. + +h. The insert-char function attempts to batch-insert all pending typeahead + that maps to self-insert, as long as it is coming from the terminal. + +i. rl_callback_sigcleanup: a new application function that can clean up and + unset any state set by readline's callback mode. Intended to be used + after a signal. + +j. If an incremental search string has its last character removed with DEL, the + resulting empty search string no longer matches the previous line. + +k. If readline reads a history file that begins with `#' (or the value of + the history comment character) and has enabled history timestamps, the history + entries are assumed to be delimited by timestamps. This allows multi-line + history entries. + +l. Readline now throws an error if it parses a key binding without a terminating + `:' or whitespace. + +m. The default binding for ^W in vi mode now uses word boundaries specified + by Posix (vi-unix-word-rubout is bindable command name). + +n. rl_clear_visible_line: new application-callable function; clears all + screen lines occupied by the current visible readline line. + +o. rl_tty_set_echoing: application-callable function that controls whether + or not readline thinks it is echoing terminal output. + +p. Handle >| and strings of digits preceding and following redirection + specifications as single tokens when tokenizing the line for history + expansion. + +q. Fixed a bug with displaying completions when the prefix display length + is greater than the length of the completions to be displayed. + +r. The :p history modifier now applies to the entire line, so any expansion + specifying :p causes the line to be printed instead of expanded. + +s. New application-callable function: rl_pending_signal(): returns the signal + number of any signal readline has caught but not yet handled. + +t. New application-settable variable: rl_persistent_signal_handlers: if set + to a non-zero value, readline will enable the readline-6.2 signal handler + behavior in callback mode: handlers are installed when + rl_callback_handler_install is called and removed removed when a complete + line has been read. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-6.3, and the +previous version, readline-6.2. + +1. Changes to Readline + +a. Fixed a bug that did not allow the `dd', `cc', or `yy' vi editing mode + commands to work on the entire line. + +b. Fixed a bug that caused redisplay problems with prompts longer than 128 + characters and history searches. + +c. Fixed a bug that caused readline to try and run code to modify its idea + of the screen size in a signal handler context upon receiving a SIGWINCH. + +d. Fixed a bug that caused the `meta' key to be enabled beyond the duration + of an individual call top readline(). + +e. Added a workaround for a wcwidth bug in Mac OS X that caused readline's + redisplay to mishandle zero-width combining characters. + +f. Fixed a bug that caused readline to `forget' part of a key sequence when + a multiple-key sequence caused it to break out of an incremental search. + +g. Fixed bugs that caused readline to execute code in a signal handler + context if interrupted while reading from the file system during completion. + +h. Fixed a bug that caused readline to `forget' part of a key sequence when + reading an unbound multi-character key sequence. + +i. Fixed a bug that caused Readline's signal handlers to be installed beyond + the bounds of a single call to readline(). + +j. Fixed a bug that caused the `.' command to not redo the most recent `R' + command in vi mode. + +k. Fixed a bug that caused ignoring case in completion matches to result in + readline using the wrong match. + +l. Paren matching now works in vi insert mode. + +m. Fix menu-completion to make show-all-if-ambiguous and menu-complete-display-prefix + work together. + +n. Fixed a bug that didn't allow the `cc', `dd', or `yy' commands to be redone + in vi editing mode. + +o. Fixed a bug that caused the filename comparison code to not compare + multibyte characters correctly when using case-sensitive or case-mapping + comparisons. + +p. Fixed the input reading loop to call the input hook function only when there + is no terminal input available. + +q. Fixed a bug that caused binding a macro to a multi-character key sequence + where the sequence and macro value share a common prefix to not perform + the macro replacement. + +r. Fixed several redisplay errors with multibyte characters and prompts + containing invisible characters when using horizontal scrolling. + +s. Fixed a bug that caused redisplay errors when trying to overwrite + existing characters using multibyte characters. + +t. Fixed a bug in vi mode that caused the arrow keys to set the saved last + vi-mode command to the wrong value. + +u. Fixed a bug that caused double-quoted strings to be scanned incorrectly + when being used as the value of a readline variable assignment. + +v. Fixed a bug with vi mode that prevented `.' from repeating a command + entered on a previous line (command). + +w. Fixed a bug that could cause completion to core dump if it was interrupted + by a signal. + +x. Fixed a bug that could cause readline to crash and seg fault attempting to + expand an empty history entry. + +y. Fixed a bug that caused display problems with multi-line prompts containing + invisible characters on multiple lines. + +z. Fixed a bug that caused effects made by undoing changes to a history line to + be discarded. + +2. New Features in Readline + +a. Readline is now more responsive to SIGHUP and other fatal signals when + reading input from the terminal or performing word completion but no + longer attempts to run any not-allowable functions from a signal handler + context. + +b. There are new bindable commands to search the history for the string of + characters between the beginning of the line and the point + (history-substring-search-forward, history-substring-search-backward) + +c. Readline allows quoted strings as the values of variables when setting + them with `set'. As a side effect, trailing spaces and tabs are ignored + when setting a string variable's value. + +d. The history library creates a backup of the history file when writing it + and restores the backup on a write error. + +e. New application-settable variable: rl_filename_stat_hook: a function called + with a filename before using it in a call to stat(2). Bash uses it to + expand shell variables so things like $HOME/Downloads have a slash + appended. + +f. New bindable function `print-last-kbd-macro', prints the most-recently- + defined keyboard macro in a reusable format. + +g. New user-settable variable `colored-stats', enables use of colored text + to denote file types when displaying possible completions (colored analog + of visible-stats). + +h. New user-settable variable `keyseq-timout', acts as an inter-character + timeout when reading input or incremental search strings. + +i. New application-callable function: rl_clear_history. Clears the history list + and frees all readline-associated private data. + +j. New user-settable variable, show-mode-in-prompt, adds a characters to the + beginning of the prompt indicating the current editing mode. + +k. New application-settable variable: rl_input_available_hook; function to be + called when readline needs to check whether there is data available on its + input source. The default hook checks rl_instream. + +l. Readline calls an application-set event hook (rl_signal_event_hook) after + it gets a signal while reading input (read returns -1/EINTR but readline + does not handle the signal immediately) to allow the application to handle + or otherwise note it. Not currently called for SIGHUP or SIGTERM. + +m. If the user-settable variable `history-size' is set to a value less than + 0, the history list size is unlimited. + +n. When creating shared libraries on Mac OS X, the pathname written into the + library (install_name) no longer includes the minor version number. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-6.2, +and the previous version, readline-6.1. + +1. Changes to Readline + +a. Fixed a bug that caused the unconverted filename to be added to the list of + completions when the application specified filename conversion functions. + +b. Fixed a bug that caused the wrong filename to be passed to opendir when the + application has specified a filename dequoting function. + +c. Fixed a bug when repeating a character search in vi mode in the case where + there was no search to repeat. + +d. When show-all-if-ambiguous is set, the completion routines no longer insert + a common match prefix that is shorter than the text being completed. + +e. The full set of vi editing commands may now be used in callback mode. + +f. Fixed a bug that caused readline to not update its idea of the terminal + dimensions while running in `no-echo' mode. + +h. Fixed a bug that caused readline to dump core if an application called + rl_prep_terminal without setting rl_instream. + +i. Fixed a bug that caused meta-prefixed characters bound to incremental + search forward or backward to not be recognized if they were typed + subsequently. + +j. The incremental search code treats key sequences that map to the same + functions as (default) ^G, ^W, and ^Y as equivalent to those characters. + +k. Fixed a bug in menu-complete that caused it to misbehave with large + negative argument. + +l. Fixed a bug that caused vi-mode yank-last-arg to ring the bell when invoked + at the end of the line. + +m. Fixed a bug that made an explicit argument of 0 to yank-last-arg behave + as if it were a negative argument. + +n. Fixed a bug that caused directory names in words to be completed to not + be dequoted correctly. + +2. New Features in Readline + +a. The history library does not try to write the history filename in the + current directory if $HOME is unset. This closes a potential security + problem if the application does not specify a history filename. + +b. New bindable variable `completion-display-width' to set the number of + columns used when displaying completions. + +c. New bindable variable `completion-case-map' to cause case-insensitive + completion to treat `-' and `_' as identical. + +d. There are new bindable vi-mode command names to avoid readline's case- + insensitive matching not allowing them to be bound separately. + +e. New bindable variable `menu-complete-display-prefix' causes the menu + completion code to display the common prefix of the possible completions + before cycling through the list, instead of after. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-6.1, +and the previous version, readline-6.0. + +1. Changes to Readline + +a. The SIGWINCH signal handler now avoids calling the redisplay code if + one arrives while in the middle of redisplay. + +b. Changes to the timeout code to make sure that timeout values greater + than one second are handled better. + +c. Fixed a bug in the redisplay code that was triggered by a prompt + containing invisible characters exactly the width of the screen. + +d. Fixed a bug in the redisplay code encountered when running in horizontal + scroll mode. + +e. Fixed a bug that prevented menu completion from properly completing + filenames. + +f. Fixed a redisplay bug caused by a multibyte character causing a line to + wrap. + +g. Fixed a bug that caused key sequences of two characters to not be + recognized when a longer sequence identical in the first two characters + was bound. + +h. Fixed a bug that caused history expansion to be attempted on $'...' + single-quoted strings. + +i. Fixed a bug that caused incorrect redisplay when the prompt contained + multibyte characters in an `invisible' sequence bracketed by \[ and + \]. + +j. Fixed a bug that caused history expansion to short-circuit after + encountering a multibyte character. + +k. Fixed a bug that caused applications using the callback interface to not + react to SIGINT (or other signals) until another character arrived. + +2. New Features in Readline + +a. New bindable function: menu-complete-backward. + +b. In the vi insertion keymap, C-n is now bound to menu-complete by default, + and C-p to menu-complete-backward. + +c. When in vi command mode, repeatedly hitting ESC now does nothing, even + when ESC introduces a bound key sequence. This is closer to how + historical vi behaves. + +d. New bindable function: skip-csi-sequence. Can be used as a default to + consume key sequences generated by keys like Home and End without having + to bind all keys. + +e. New application-settable function: rl_filename_rewrite_hook. Can be used + to rewite or modify filenames read from the file system before they are + compared to the word to be completed. + +f. New bindable variable: skip-completed-text, active when completing in the + middle of a word. If enabled, it means that characters in the completion + that match characters in the remainder of the word are "skipped" rather + than inserted into the line. + +g. The pre-readline-6.0 version of menu completion is available as + "old-menu-complete" for users who do not like the readline-6.0 version. + +h. New bindable variable: echo-control-characters. If enabled, and the + tty ECHOCTL bit is set, controls the echoing of characters corresponding + to keyboard-generated signals. + +i. New bindable variable: enable-meta-key. Controls whether or not readline + sends the smm/rmm sequences if the terminal indicates it has a meta key + that enables eight-bit characters. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-6.0, +and the previous version, readline-5.2. + +1. Changes to Readline + +a. Fixed a number of redisplay errors in environments supporting multibyte + characters. + +b. Fixed bugs in vi command mode that caused motion commands to inappropriately + set the mark. + +c. When using the arrow keys in vi insertion mode, readline allows movement + beyond the current end of the line (unlike command mode). + +d. Fixed bugs that caused readline to loop when the terminal has been taken + away and reads return -1/EIO. + +e. Fixed bugs in redisplay occurring when displaying prompts containing + invisible characters. + +f. Fixed a bug that caused the completion append character to not be reset to + the default after an application-specified completion function changed it. + +g. Fixed a problem that caused incorrect positioning of the cursor while in + emacs editing mode when moving forward at the end of a line while using + a locale supporting multibyte characters. + +h. Fixed an off-by-one error that caused readline to drop every 511th + character of buffered input. + +i. Fixed a bug that resulted in SIGTERM not being caught or cleaned up. + +j. Fixed redisplay bugs caused by multiline prompts with invisible characters + or no characters following the final newline. + +k. Fixed redisplay bug caused by prompts consisting solely of invisible + characters. + +l. Fixed a bug in the code that buffers characters received very quickly in + succession which caused characters to be dropped. + +m. Fixed a bug that caused readline to reference uninitialized data structures + if it received a SIGWINCH before completing initialzation. + +n. Fixed a bug that caused the vi-mode `last command' to be set incorrectly + and therefore unrepeatable. + +o. Fixed a bug that caused readline to disable echoing when it was being used + with an output file descriptor that was not a terminal. + +p. Readline now blocks SIGINT while manipulating internal data structures + during redisplay. + +q. Fixed a bug in redisplay that caused readline to segfault when pasting a + very long line (over 130,000 characters). + +r. Fixed bugs in redisplay when using prompts with no visible printing + characters. + +s. Fixed a bug that caused redisplay errors when using prompts with invisible + characters and numeric arguments to a command in a multibyte locale. + +t. Fixed a bug that caused redisplay errors when using prompts with invisible + characters spanning more than two physical screen lines. + +2. New Features in Readline + +a. A new variable, rl_sort_completion_matches; allows applications to inhibit + match list sorting (but beware: some things don't work right if + applications do this). + +b. A new variable, rl_completion_invoking_key; allows applications to discover + the key that invoked rl_complete or rl_menu_complete. + +c. The functions rl_block_sigint and rl_release_sigint are now public and + available to calling applications who want to protect critical sections + (like redisplay). + +d. The functions rl_save_state and rl_restore_state are now public and + available to calling applications; documented rest of readline's state + flag values. + +e. A new user-settable variable, `history-size', allows setting the maximum + number of entries in the history list. + +f. There is a new implementation of menu completion, with several improvements + over the old; the most notable improvement is a better `completions + browsing' mode. + +g. The menu completion code now uses the rl_menu_completion_entry_function + variable, allowing applications to provide their own menu completion + generators. + +h. There is support for replacing a prefix of a pathname with a `...' when + displaying possible completions. This is controllable by setting the + `completion-prefix-display-length' variable. Matches with a common prefix + longer than this value have the common prefix replaced with `...'. + +i. There is a new `revert-all-at-newline' variable. If enabled, readline will + undo all outstanding changes to all history lines when `accept-line' is + executed. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-5.2, +and the previous version, readline-5.1. + +1. Changes to Readline + +a. Fixed a problem that caused segmentation faults when using readline in + callback mode and typing consecutive DEL characters on an empty line. + +b. Fixed several redisplay problems with multibyte characters, all having to + do with the different code paths and variable meanings between single-byte + and multibyte character redisplay. + +c. Fixed a problem with key sequence translation when presented with the + sequence \M-\C-x. + +d. Fixed a problem that prevented the `a' command in vi mode from being + undone and redone properly. + +e. Fixed a problem that prevented empty inserts in vi mode from being undone + properly. + +f. Fixed a problem that caused readline to initialize with an incorrect idea + of whether or not the terminal can autowrap. + +g. Fixed output of key bindings (like bash `bind -p') to honor the setting of + convert-meta and use \e where appropriate. + +h. Changed the default filename completion function to call the filename + dequoting function if the directory completion hook isn't set. This means + that any directory completion hooks need to dequote the directory name, + since application-specific hooks need to know how the word was quoted, + even if no other changes are made. + +i. Fixed a bug with creating the prompt for a non-interactive search string + when there are non-printing characters in the primary prompt. + +j. Fixed a bug that caused prompts with invisible characters to be redrawn + multiple times in a multibyte locale. + +k. Fixed a bug that could cause the key sequence scanning code to return the + wrong function. + +l. Fixed a problem with the callback interface that caused it to fail when + using multi-character keyboard macros. + +m. Fixed a bug that could cause a core dump when an edited history entry was + re-executed under certain conditions. + +n. Fixed a bug that caused readline to reference freed memory when attmpting + to display a portion of the prompt. + +o. Fixed a bug with prompt redisplay in a multi-byte locale to avoid redrawing + the prompt and input line multiple times. + +p. Fixed history expansion to not be confused by here-string redirection. + +q. Readline no longer treats read errors by converting them to newlines, as + it does with EOF. This caused partial lines to be returned from readline(). + +r. Fixed a redisplay bug that occurred in multibyte-capable locales when the + prompt was one character longer than the screen width. + +2. New Features in Readline + +a. Calling applications can now set the keyboard timeout to 0, allowing + poll-like behavior. + +b. The value of SYS_INPUTRC (configurable at compilation time) is now used as + the default last-ditch startup file. + +c. The history file reading functions now allow windows-like \r\n line + terminators. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-5.1, +and the previous version, readline-5.0. + +1. Changes to Readline + +a. Fixed a bug that caused multiliine prompts to be wrapped and displayed + incorrectly. + +b. Fixed a bug that caused ^P/^N in emacs mode to fail to display the current + line correctly. + +c. Fixed a problem in computing the number of invisible characters on the first + line of a prompt whose length exceeds the screen width. + +d. Fixed vi-mode searching so that failure preserves the current line rather + than the last line in the history list. + +e. Fixed the vi-mode `~' command (change-case) to have the correct behavior at + end-of-line when manipulating multibyte characters. + +f. Fixed the vi-mode `r' command (change-char) to have the correct behavior at + end-of-line when manipulating multibyte characters. + +g. Fixed multiple bugs in the redisplay of multibyte characters: displaying + prompts longer than the screen width containing multibyte characters, + +h. Fix the calculation of the number of physical characters in the prompt + string when it contains multibyte characters. + +i. A non-zero value for the `rl_complete_suppress_append' variable now causes + no `/' to be appended to a directory name. + +j. Fixed forward-word and backward-word to work when words contained + multibyte characters. + +k. Fixed a bug in finding the delimiter of a `?' substring when performing + history expansion in a locale that supports multibyte characters. + +l. Fixed a memory leak caused by not freeing the timestamp in a history entry. + +m. Fixed a bug that caused "\M-x" style key bindings to not obey the setting + of the `convert-meta' variable. + +n. Fixed saving and restoring primary prompt when prompting for incremental + and non-incremental searches; search prompts now display multibyte + characters correctly. + +o. Fixed a bug that caused keys originally bound to self-insert but shadowed + by a multi-character key sequence to not be inserted. + +p. Fixed code so rl_prep_term_function and rl_deprep_term_function aren't + dereferenced if NULL (matching the documentation). + +q. Extensive changes to readline to add enough state so that commands + requiring additional characters (searches, multi-key sequences, numeric + arguments, commands requiring an additional specifier character like + vi-mode change-char, etc.) work without synchronously waiting for + additional input. + +r. Lots of changes so readline builds and runs on MinGW. + +s. Readline no longer tries to modify the terminal settings when running in + callback mode. + +t. The Readline display code no longer sets the location of the last invisible + character in the prompt if the \[\] sequence is empty. + +u. The `change-case' command now correctly changes the case of multibyte + characters. + +v. Changes to the shared library construction scripts to deal with Windows + DLL naming conventions for Cygwin. + +w. Fixed the redisplay code to avoid core dumps resulting from a poorly-timed + SIGWINCH. + +x. Fixed the non-incremental search code in vi mode to dispose of any current + undo list when copying a line from the history into the current editing + buffer. + +y. Fixed a bug that caused reversing the incremental search direction to + not work correctly. + +z. Fixed the vi-mode `U' command to only undo up to the first time insert mode + was entered, as Posix specifies. + +aa. Fixed a bug in the vi-mode `r' command that left the cursor in the wrong + place. + +bb. Fixed a redisplay bug caused by moving the cursor vertically to a line + with invisible characters in the prompt in a multibyte locale. + +cc. Fixed a bug that could cause the terminal special chars to be bound in the + wrong keymap in vi mode. + +2. New Features in Readline + +a. The key sequence sent by the keypad `delete' key is now automatically + bound to delete-char. + +b. A negative argument to menu-complete now cycles backward through the + completion list. + +c. A new bindable readline variable: bind-tty-special-chars. If non-zero, + readline will bind the terminal special characters to their readline + equivalents when it's called (on by default). + +d. New bindable command: vi-rubout. Saves deleted text for possible + reinsertion, as with any vi-mode `text modification' command; `X' is bound + to this in vi command mode. + +e. If the rl_completion_query_items is set to a value < 0, readline never + asks the user whether or not to view the possible completions. + +f. The `C-w' binding in incremental search now understands multibyte + characters. + +g. New application-callable auxiliary function, rl_variable_value, returns + a string corresponding to a readline variable's value. + +h. When parsing inputrc files and variable binding commands, the parser + strips trailing whitespace from values assigned to boolean variables + before checking them. + +i. A new external application-controllable variable that allows the LINES + and COLUMNS environment variables to set the window size regardless of + what the kernel returns. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-5.0, +and the previous version, readline-4.3. + +1. Changes to Readline + +a. Fixes to avoid core dumps because of null pointer references in the + multibyte character code. + +b. Fix to avoid infinite recursion caused by certain key combinations. + +c. Fixed a bug that caused the vi-mode `last command' to be set incorrectly. + +d. Readline no longer tries to read ahead more than one line of input, even + when more is available. + +e. Fixed the code that adjusts the point to not mishandle null wide + characters. + +f. Fixed a bug in the history expansion `g' modifier that caused it to skip + every other match. + +g. Fixed a bug that caused the prompt to overwrite previous output when the + output doesn't contain a newline and the locale supports multibyte + characters. This same change fixes the problem of readline redisplay + slowing down dramatically as the line gets longer in multibyte locales. + +h. History traversal with arrow keys in vi insertion mode causes the cursor + to be placed at the end of the new line, like in emacs mode. + +i. The locale initialization code does a better job of using the right + precedence and defaulting when checking the appropriate environment + variables. + +j. Fixed the history word tokenizer to handle <( and >( better when used as + part of bash. + +k. The overwrite mode code received several bug fixes to improve undo. + +l. Many speedups to the multibyte character redisplay code. + +m. The callback character reading interface should not hang waiting to read + keyboard input. + +n. Fixed a bug with redoing vi-mode `s' command. + +o. The code that initializes the terminal tracks changes made to the terminal + special characters with stty(1) (or equivalent), so that these changes + are reflected in the readline bindings. New application-callable function + to make it work: rl_tty_unset_default_bindings(). + +p. Fixed a bug that could cause garbage to be inserted in the buffer when + changing character case in vi mode when using a multibyte locale. + +q. Fixed a bug in the redisplay code that caused problems on systems + supporting multibyte characters when moving between history lines when the + new line has more glyphs but fewer bytes. + +r. Undo and redo now work better after exiting vi insertion mode. + +s. Make sure system calls are restarted after a SIGWINCH is received using + SA_RESTART. + +t. Improvements to the code that displays possible completions when using + multibyte characters. + +u. Fixed a problem when parsing nested if statements in inputrc files. + +v. The completer now takes multibyte characters into account when looking for + quoted substrings on which to perform completion. + +w. The history search functions now perform better bounds checking on the + history list. + +x. Change to history expansion functions to treat `^' as equivalent to word + one, as the documention states. + +y. Some changes to the display code to improve display and redisplay of + multibyte characters. + +z. Changes to speed up the multibyte character redisplay code. + +aa. Fixed a bug in the vi-mode `E' command that caused it to skip over the + last character of a word if invoked while point was on the word's + next-to-last character. + +bb. Fixed a bug that could cause incorrect filename quoting when + case-insensitive completion was enabled and the word being completed + contained backslashes quoting word break characters. + +cc. Fixed a bug in redisplay triggered when the prompt string contains + invisible characters. + +dd. Fixed some display (and other) bugs encountered in multibyte locales + when a non-ascii character was the last character on a line. + +ee. Fixed some display bugs caused by multibyte characters in prompt strings. + +ff. Fixed a problem with history expansion caused by non-whitespace characters + used as history word delimiters. + +gg. Fixed a problem that could cause readline to refer to freed memory when + moving between history lines while doing searches. + +hh. Improvements to the code that expands and displays prompt strings + containing multibyte characters. + +ii. Fixed a problem with vi-mode not correctly remembering the numeric argument + to the last `c'hange command for later use with `.'. + +jj. Fixed a bug in vi-mode that caused multi-digit count arguments to work + incorrectly. + +kk. Fixed a problem in vi-mode that caused the last text modification command + to not be remembered across different command lines. + +ll. Fixed problems with changing characters and changing case at the end of + the line. + +mm. Fixed a problem with readline saving the contents of the current line + before beginning a non-interactive search. + +nn. Fixed a problem with EOF detection when using rl_event_hook. + +oo. Fixed a problem with the vi mode `p' and `P' commands ignoring numeric + arguments. + +2. New Features in Readline + +a. History expansion has a new `a' modifier equivalent to the `g' modifier + for compatibility with the BSD csh. + +b. History expansion has a new `G' modifier equivalent to the BSD csh `g' + modifier, which performs a substitution once per word. + +c. All non-incremental search operations may now undo the operation of + replacing the current line with the history line. + +d. The text inserted by an `a' command in vi mode can be reinserted with + `.'. + +e. New bindable variable, `show-all-if-unmodified'. If set, the readline + completer will list possible completions immediately if there is more + than one completion and partial completion cannot be performed. + +f. There is a new application-callable `free_history_entry()' function. + +g. History list entries now contain timestamp information; the history file + functions know how to read and write timestamp information associated + with each entry. + +h. Four new key binding functions have been added: + + rl_bind_key_if_unbound() + rl_bind_key_if_unbound_in_map() + rl_bind_keyseq_if_unbound() + rl_bind_keyseq_if_unbound_in_map() + +i. New application variable, rl_completion_quote_character, set to any + quote character readline finds before it calls the application completion + function. + +j. New application variable, rl_completion_suppress_quote, settable by an + application completion function. If set to non-zero, readline does not + attempt to append a closing quote to a completed word. + +k. New application variable, rl_completion_found_quote, set to a non-zero + value if readline determines that the word to be completed is quoted. + Set before readline calls any application completion function. + +l. New function hook, rl_completion_word_break_hook, called when readline + needs to break a line into words when completion is attempted. Allows + the word break characters to vary based on position in the line. + +m. New bindable command: unix-filename-rubout. Does the same thing as + unix-word-rubout, but adds `/' to the set of word delimiters. + +n. When listing completions, directories have a `/' appended if the + `mark-directories' option has been enabled. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-4.3, +and the previous version, readline-4.2a. + +1. Changes to Readline + +a. Fixed output of comment-begin character when listing variable values. + +b. Added some default key bindings for common escape sequences produced by + HOME and END keys. + +c. Fixed the mark handling code to be more emacs-compatible. + +d. A bug was fixed in the code that prints possible completions to keep it + from printing empty strings in certain circumstances. + +e. Change the key sequence printing code to print ESC as M\- if ESC is a + meta-prefix character -- it's easier for users to understand than \e. + +f. Fixed unstifle_history() to return values that match the documentation. + +g. Fixed the event loop (rl_event_hook) to handle the case where the input + file descriptor is invalidated. + +h. Fixed the prompt display code to work better when the application has a + custom redisplay function. + +i. Changes to make reading and writing the history file a little faster, and + to cope with huge history files without calling abort(3) from xmalloc. + +j. The vi-mode `S' and `s' commands are now undone correctly. + +k. Fixed a problem which caused the display to be messed up when the last + line of a multi-line prompt (possibly containing invisible characters) + was longer than the screen width. + +2. New Features in Readline + +a. Support for key `subsequences': allows, e.g., ESC and ESC-a to both + be bound to readline functions. Now the arrow keys may be used in vi + insert mode. + +b. When listing completions, and the number of lines displayed is more than + the screen length, readline uses an internal pager to display the results. + This is controlled by the `page-completions' variable (default on). + +c. New code to handle editing and displaying multibyte characters. + +d. The behavior introduced in bash-2.05a of deciding whether or not to + append a slash to a completed name that is a symlink to a directory has + been made optional, controlled by the `mark-symlinked-directories' + variable (default is the 2.05a behavior). + +e. The `insert-comment' command now acts as a toggle if given a numeric + argument: if the first characters on the line don't specify a + comment, insert one; if they do, delete the comment text + +f. New application-settable completion variable: + rl_completion_mark_symlink_dirs, allows an application's completion + function to temporarily override the user's preference for appending + slashes to names which are symlinks to directories. + +g. New function available to application completion functions: + rl_completion_mode, to tell how the completion function was invoked + and decide which argument to supply to rl_complete_internal (to list + completions, etc.). + +h. Readline now has an overwrite mode, toggled by the `overwrite-mode' + bindable command, which could be bound to `Insert'. + +i. New application-settable completion variable: + rl_completion_suppress_append, inhibits appending of + rl_completion_append_character to completed words. + +j. New key bindings when reading an incremental search string: ^W yanks + the currently-matched word out of the current line into the search + string; ^Y yanks the rest of the current line into the search string, + DEL or ^H deletes characters from the search string. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-4.2a, +and the previous version, readline-4.2. + +1. Changes to Readline + +a. More `const' and type casting fixes. + +b. Changed rl_message() to use vsnprintf(3) (if available) to fix buffer + overflow problems. + +c. The completion code no longer appends a `/' or ` ' to a match when + completing a symbolic link that resolves to a directory name, unless + the match does not add anything to the word being completed. This + means that a tab will complete the word up to the full name, but not + add anything, and a subsequent tab will add a slash. + +d. Fixed a trivial typo that made the vi-mode `dT' command not work. + +e. Fixed the tty code so that ^S and ^Q can be inserted with rl_quoted_insert. + +f. Fixed the tty code so that ^V works more than once. + +g. Changed the use of __P((...)) for function prototypes to PARAMS((...)) + because the use of __P in typedefs conflicted g++ and glibc. + +h. The completion code now attempts to do a better job of preserving the + case of the word the user typed if ignoring case in completions. + +i. Readline defaults to not echoing the input and lets the terminal + initialization code enable echoing if there is a controlling terminal. + +j. The key binding code now processes only two hex digits after a `\x' + escape sequence, and the documentation was changed to note that the + octal and hex escape sequences result in an eight-bit value rather + than strict ASCII. + +k. Fixed a few places where negative array subscripts could have occurred. + +l. Fixed the vi-mode code to use a better method to determine the bounds of + the array used to hold the marks, and to avoid out-of-bounds references. + +m. Fixed the defines in chardefs.h to work better when chars are signed. + +n. Fixed configure.in to use the new names for bash autoconf macros. + +o. Readline no longer attempts to define its own versions of some ctype + macros if they are implemented as functions in libc but not as macros in + . + +p. Fixed a problem where rl_backward could possibly set point to before + the beginning of the line. + +q. Fixed Makefile to not put -I/usr/include into CFLAGS, since it can cause + include file problems. + +2. New Features in Readline + +a. Added extern declaration for rl_get_termcap to readline.h, making it a + public function (it was always there, just not in readline.h). + +b. New #defines in readline.h: RL_READLINE_VERSION, currently 0x0402, + RL_VERSION_MAJOR, currently 4, and RL_VERSION_MINOR, currently 2. + +c. New readline variable: rl_readline_version, mirrors RL_READLINE_VERSION. + +d. New bindable boolean readline variable: match-hidden-files. Controls + completion of files beginning with a `.' (on Unix). Enabled by default. + +e. The history expansion code now allows any character to terminate a + `:first-' modifier, like csh. + +f. The incremental search code remembers the last search string and uses + it if ^R^R is typed without a search string. + +h. New bindable variable `history-preserve-point'. If set, the history + code attempts to place the user at the same location on each history + line retrived with previous-history or next-history. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-4.2, +and the previous version, readline-4.1. + +1. Changes to Readline + +a. When setting the terminal attributes on systems using `struct termio', + readline waits for output to drain before changing the attributes. + +b. A fix was made to the history word tokenization code to avoid attempts to + dereference a null pointer. + +c. Readline now defaults rl_terminal_name to $TERM if the calling application + has left it unset, and tries to initialize with the resultant value. + +d. Instead of calling (*rl_getc_function)() directly to get input in certain + places, readline now calls rl_read_key() consistently. + +e. Fixed a bug in the completion code that allowed a backslash to quote a + single quote inside a single-quoted string. + +f. rl_prompt is no longer assigned directly from the argument to readline(), + but uses memory allocated by readline. This allows constant strings to + be passed to readline without problems arising when the prompt processing + code wants to modify the string. + +g. Fixed a bug that caused non-interactive history searches to return the + wrong line when performing multiple searches backward for the same string. + +h. Many variables, function arguments, and function return values are now + declared `const' where appropriate, to improve behavior when linking with + C++ code. + +i. The control character detection code now works better on systems where + `char' is unsigned by default. + +j. The vi-mode numeric argument is now capped at 999999, just like emacs mode. + +k. The Function, CPFunction, CPPFunction, and VFunction typedefs have been + replaced with a set of specific prototyped typedefs, though they are + still in the readline header files for backwards compatibility. + +m. Nearly all of the (undocumented) internal global variables in the library + now have an _rl_ prefix -- there were a number that did not, like + screenheight, screenwidth, alphabetic, etc. + +n. The ding() convenience function has been renamed to rl_ding(), though the + old function is still defined for backwards compatibility. + +o. The completion convenience functions filename_completion_function, + username_completion_function, and completion_matches now have an rl_ + prefix, though the old names are still defined for backwards compatibility. + +p. The functions shared by readline and bash (linkage is satisfied from bash + when compiling with bash, and internally otherwise) now have an sh_ prefix. + +q. Changed the shared library creation procedure on Linux and BSD/OS 4.x so + that the `soname' contains only the major version number rather than the + major and minor numbers. + +r. Fixed a redisplay bug that occurred when the prompt spanned more than one + physical line and contained invisible characters. + +s. Added a missing `includedir' variable to the Makefile. + +t. When installing the shared libraries, make sure symbolic links are relative. + +u. Added configure test so that it can set `${MAKE}' appropriately. + +v. Fixed a bug in rl_forward that could cause the point to be set to before + the beginning of the line in vi mode. + +w. Fixed a bug in the callback read-char interface to make it work when a + readline function pushes some input onto the input stream with + rl_execute_next (like the incremental search functions). + +x. Fixed a file descriptor leak in the history file manipulation code that + was tripped when attempting to truncate a non-regular file (like + /dev/null). + +y. Changes to make all of the exported readline functions declared in + readline.h have an rl_ prefix (rltty_set_default_bindings is now + rl_tty_set_default_bindings, crlf is now rl_crlf, etc.) + +z. The formatted documentation included in the base readline distribution + is no longer removed on a `make distclean'. + +aa. Some changes were made to avoid gcc warnings with -Wall. + +bb. rl_get_keymap_by_name now finds keymaps case-insensitively, so + `set keymap EMACS' works. + +cc. The history file writing and truncation functions now return a useful + status on error. + +dd. Fixed a bug that could cause applications to dereference a NULL pointer + if a NULL second argument was passed to history_expand(). + +ee. If a hook function assigned to rl_event_hook sets rl_done to a non-zero + value, rl_read_key() now immediately returns '\n' (which is assumed to + be bound to accept-line). + +2. New Features in Readline + +a. The blink timeout for paren matching is now settable by applications, + via the rl_set_paren_blink_timeout() function. + +b. _rl_executing_macro has been renamed to rl_executing_macro, which means + it's now part of the public interface. + +c. Readline has a new variable, rl_readline_state, which is a bitmap that + encapsulates the current state of the library; intended for use by + callbacks and hook functions. + +d. rlfe has a new -l option to log input and output (-a appends to logfile), + a new -n option to set the readline application name, and -v and -h + options for version and help information. + +e. rlfe can now perform filename completion for the inferior process if the + OS has a /proc//cwd that can be read with readlink(2) to get the + inferior's current working directory. + +f. A new file, rltypedefs.h, contains the new typedefs for function pointers + and is installed by `make install'. + +g. New application-callable function rl_set_prompt(const char *prompt): + expands its prompt string argument and sets rl_prompt to the result. + +h. New application-callable function rl_set_screen_size(int rows, int cols): + public method for applications to set readline's idea of the screen + dimensions. + +i. The history example program (examples/histexamp.c) is now built as one + of the examples. + +j. The documentation has been updated to cover nearly all of the public + functions and variables declared in readline.h. + +k. New function, rl_get_screen_size (int *rows, int *columns), returns + readline's idea of the screen dimensions. + +l. The timeout in rl_gather_tyi (readline keyboard input polling function) + is now settable via a function (rl_set_keyboard_input_timeout()). + +m. Renamed the max_input_history variable to history_max_entries; the old + variable is maintained for backwards compatibility. + +n. The list of characters that separate words for the history tokenizer is + now settable with a variable: history_word_delimiters. The default + value is as before. + +o. There is a new history.3 manual page documenting the history library. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-4.1, +and the previous version, readline-4.0. + +1. Changes to Readline + +a. Changed the HTML documents so that the table-of-contents is no longer + a separate file. + +b. Changes to the shared object configuration for: Irix 5.x, Irix 6.x, + OSF/1. + +c. The shared library major and minor versions are now constructed + automatically by configure and substituted into the makefiles. + +d. It's now possible to install the shared libraries separately from the + static libraries. + +e. The history library tries to truncate the history file only if it is a + regular file. + +f. A bug that caused _rl_dispatch to address negative array indices on + systems with signed chars was fixed. + +g. rl-yank-nth-arg now leaves the history position the same as when it was + called. + +h. Changes to the completion code to handle MS-DOS drive-letter:pathname + filenames. + +i. Completion is now case-insensitive by default on MS-DOS. + +j. Fixes to the history file manipulation code for MS-DOS. + +k. Readline attempts to bind the arrow keys to appropriate defaults on MS-DOS. + +l. Some fixes were made to the redisplay code for better operation on MS-DOS. + +m. The quoted-insert code will now insert tty special chars like ^C. + +n. A bug was fixed that caused the display code to reference memory before + the start of the prompt string. + +o. More support for __EMX__ (OS/2). + +p. A bug was fixed in readline's signal handling that could cause infinite + recursion in signal handlers. + +q. A bug was fixed that caused the point to be less than zero when rl_forward + was given a very large numeric argument. + +r. The vi-mode code now gets characters via the application-settable value + of rl_getc_function rather than calling rl_getc directly. + +s. The history file code now uses O_BINARY mode when reading and writing + the history file on cygwin32. + +t. Fixed a bug in the redisplay code for lines with more than 256 line + breaks. + +u. A bug was fixed which caused invisible character markers to not be + stripped from the prompt string if the terminal was in no-echo mode. + +v. Readline no longer tries to get the variables it needs for redisplay + from the termcap entry if the calling application has specified its + own redisplay function. Readline treats the terminal as `dumb' in + this case. + +w. Fixes to the SIGWINCH code so that a multiple-line prompt with escape + sequences is redrawn correctly. + +x. Changes to the install and install-shared targets so that the libraries + and header files are installed separately. + +2. New Features in Readline + +a. A new Readline `user manual' is in doc/rluserman.texinfo. + +b. Parentheses matching is now always compiled into readline, and enabled + or disabled when the value of the `blink-matching-paren' variable is + changed. + +c. MS-DOS systems now use ~/_inputrc as the last-ditch inputrc filename. + +d. MS-DOS systems now use ~/_history as the default history file. + +e. history-search-{forward,backward} now leave the point at the end of the + line when the string to search for is empty, like + {reverse,forward}-search-history. + +f. history-search-{forward,backward} now leave the last history line found + in the readline buffer if the second or subsequent search fails. + +g. New function for use by applications: rl_on_new_line_with_prompt, used + when an application displays the prompt itself before calling readline(). + +h. New variable for use by applications: rl_already_prompted. An application + that displays the prompt itself before calling readline() must set this to + a non-zero value. + +i. A new variable, rl_gnu_readline_p, always 1. The intent is that an + application can verify whether or not it is linked with the `real' + readline library or some substitute. + +j. Per Bothner's `rlfe' (pronounced `Ralphie') readline front-end program + is included in the examples subdirectory, though it is not built + by default. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-4.0, +and the previous version, readline-2.2. + +1. Changes to Readline + +a. The version number is now 4.0, to match the major and minor version + numbers on the shared readline and history libraries. Future + releases will maintain the identical numbering. + +b. Fixed a typo in the `make install' recipe that copied libreadline.a + to libhistory.old right after installing it. + +c. The readline and history info files are now installed out of the source + directory if they are not found in the build directory. + +d. The library no longer exports a function named `savestring' -- backwards + compatibility be damned. + +e. There is no longer any #ifdef SHELL code in the source files. + +f. Some changes were made to the key binding code to fix memory leaks and + better support Win32 systems. + +g. Fixed a silly typo in the paren matching code -- it's microseconds, not + milliseconds. + +h. The readline library should be compilable by C++ compilers. + +i. The readline.h public header file now includes function prototypes for + all readline functions, and some changes were made to fix errors in the + source files uncovered by the use of prototypes. + +j. The maximum numeric argument is now clamped at 1000000. + +k. Fixes to rl_yank_last_arg to make it behave better. + +l. Fixed a bug in the display code that caused core dumps if the prompt + string length exceeded 1024 characters. + +m. The menu completion code was fixed to properly insert a single completion + if there is only one match. + +n. A bug was fixed that caused the display code to improperly display tabs + after newlines. + +o. A fix was made to the completion code in which a typo caused the wrong + value to be passed to the function that computed the longest common + prefix of the list of matches. + +p. The completion code now checks the value of rl_filename_completion_desired, + which is set by application-supplied completion functions to indicate + that filename completion is being performed, to decide whether or not to + call an application-supplied `ignore completions' function. + +q. Code was added to the history library to catch history substitutions + using `&' without a previous history substitution or search having been + performed. + + +2. New Features in Readline + +a. There is a new script, support/shobj-conf, to do system-specific shared + object and library configuration. It generates variables for configure + to substitute into makefiles. The README file provides a detailed + explanation of the shared library creation process. + +b. Shared libraries and objects are now built in the `shlib' subdirectory. + There is a shlib/Makefile.in to control the build process. `make shared' + from the top-level directory is still the right way to build shared + versions of the libraries. + +c. rlconf.h is now installed, so applications can find out which features + have been compiled into the installed readline and history libraries. + +d. rlstdc.h is now an installed header file. + +e. Many changes to the signal handling: + o Readline now catches SIGQUIT and cleans up the tty before returning; + o A new variable, rl_catch_signals, is available to application writers + to indicate to readline whether or not it should install its own + signal handlers for SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP, + SIGTTIN, and SIGTTOU; + o A new variable, rl_catch_sigwinch, is available to application + writers to indicate to readline whether or not it should install its + own signal handler for SIGWINCH, which will chain to the calling + applications's SIGWINCH handler, if one is installed; + o There is a new function, rl_free_line_state, for application signal + handlers to call to free up the state associated with the current + line after receiving a signal; + o There is a new function, rl_cleanup_after_signal, to clean up the + display and terminal state after receiving a signal; + o There is a new function, rl_reset_after_signal, to reinitialize the + terminal and display state after an application signal handler + returns and readline continues + +f. There is a new function, rl_resize_terminal, to reset readline's idea of + the screen size after a SIGWINCH. + +g. New public functions: rl_save_prompt and rl_restore_prompt. These were + previously private functions with a `_' prefix. These functions are + used when an application wants to write a message to the `message area' + with rl_message and have the prompt restored correctly when the message + is erased. + +h. New function hook: rl_pre_input_hook, called just before readline starts + reading input, after initialization. + +i. New function hook: rl_display_matches_hook, called when readline would + display the list of completion matches. The new function + rl_display_match_list is what readline uses internally, and is available + for use by application functions called via this hook. + +j. New bindable function, delete-char-or-list, like tcsh. + +k. A new variable, rl_erase_empty_line, which, if set by an application using + readline, will cause readline to erase, prompt and all, lines on which the + only thing typed was a newline. + +l. There is a new script, support/shlib-install, to install and uninstall + the shared readline and history libraries. + +m. A new bindable variable, `isearch-terminators', which is a string + containing the set of characters that should terminate an incremental + search without being executed as a command. + +n. A new bindable function, forward-backward-delete-char. + +------------------------------------------------------------------------------- +This document details the changes between this version, readline-2.2, +and the previous version, readline-2.1. + +1. Changes to Readline + +a. Added a missing `extern' to a declaration in readline.h that kept + readline from compiling cleanly on some systems. + +b. The history file is now opened with mode 0600 when it is written for + better security. + +c. Changes were made to the SIGWINCH handling code so that prompt redisplay + is done better. + +d. ^G now interrupts incremental searches correctly. + +e. A bug that caused a core dump when the set of characters to be quoted + when completing words was empty was fixed. + +f. Fixed a problem in the readline test program rltest.c that caused a core + dump. + +g. The code that handles parser directives in inputrc files now displays + more error messages. + +h. The history expansion code was fixed so that the appearance of the + history comment character at the beginning of a word inhibits history + expansion for that word and the rest of the input line. + +i. The code that prints completion listings now behaves better if one or + more of the filenames contains non-printable characters. + +j. The time delay when showing matching parentheses is now 0.5 seconds. + + +2. New Features in Readline + +a. There is now an option for `iterative' yank-last-arg handline, so a user + can keep entering `M-.', yanking the last argument of successive history + lines. + +b. New variable, `print-completions-horizontally', which causes completion + matches to be displayed across the screen (like `ls -x') rather than up + and down the screen (like `ls'). + +c. New variable, `completion-ignore-case', which causes filename completion + and matching to be performed case-insensitively. + +d. There is a new bindable command, `magic-space', which causes history + expansion to be performed on the current readline buffer and a space to + be inserted into the result. + +e. There is a new bindable command, `menu-complete', which enables tcsh-like + menu completion (successive executions of menu-complete insert a single + completion match, cycling through the list of possible completions). + +f. There is a new bindable command, `paste-from-clipboard', for use on Win32 + systems, to insert the text from the Win32 clipboard into the editing + buffer. + +g. The key sequence translation code now understands printf-style backslash + escape sequences, including \NNN octal escapes. These escape sequences + may be used in key sequence definitions or macro values. + +h. An `$include' inputrc file parser directive has been added. diff --git a/readline/readline/COPYING b/readline/readline/COPYING new file mode 100644 index 0000000000..94a9ed024d --- /dev/null +++ b/readline/readline/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/readline/readline/ChangeLog.gdb b/readline/readline/ChangeLog.gdb new file mode 100644 index 0000000000..0b3d1ab5d9 --- /dev/null +++ b/readline/readline/ChangeLog.gdb @@ -0,0 +1,1550 @@ +2019-10-23 Andrew Burgess + + PR cli/24980 + * display.c (init_line_structures): Initialise line_state using + original minsize value. + +2019-08-13 Christian Biesinger + + * colors.c (_rl_print_color_indicator): Remove unnecessary + S_ISLNK check to fix compilation on MinGW. + +2019-08-12 Tom Tromey + + * Imported readline 8.0. + +2019-08-12 Tom Tromey + + * Makefile.in (xfree.o): Don't depend on readline.h. + * xfree.c (xfree): Remove gdb workaround. + * xmalloc.h (xfree): Remove #define. + +2018-08-12 Tom Tromey + + * emacs_keymap.c: Remove gdb workaround. + +2018-08-12 Tom Tromey + + * complete.c (get_y_or_n): Remove gdb workaround. + +2018-08-12 Tom Tromey + + * Imported readline 7.0 patch 5. + +2019-07-12 Tom de Vries + Chet Ramey + + PR cli/24514 + * readline/display.c (init_line_structures, rl_redisplay): Ensure + line_size is at least _rl_screenwidth + 1. + +2019-01-31 Alan Hayward + + * config.h.in: Add SOURCE/EXTENSION macros. + * histfile.c (history_truncate_file): Check return of write. + * util.c (_rl_tropen): Ensure pid is long. + +2017-05-19 Eli Zaretskii + + * input.c [_WIN32]: Include to avoid compiler warning on + MinGW. + +2016-09-17 Eli Zaretskii + + * util.c: Include rlshell.h. + (_rl_tropen) [_WIN32 && !__CYGWIN__]: Open the trace file in the + user's temporary directory. + + * tcap.h [HAVE_NCURSES_TERMCAP_H]: Include ncurses/termcap.h. + + * input.c (w32_isatty) [_WIN32 && !__CYGWIN__]: New function, to + replace isatty that is not reliable enough on MS-Windows. + (isatty) [_WIN32 && !__CYGWIN__]: Redirect to w32_isatty. + (rl_getc): Call _getch, not getch, which could be an ncurses + function when linked with ncurses, in which case getch will return + EOF for any keystroke, because there's no curses window. + + * tilde.c (tilde_expand_word) [_WIN32]: + * histfile.c (history_filename) [_WIN32]: Windows-specific + environment variable to replace HOME if that is undefined. + + * funmap.c (default_funmap): Compile rl_paste_from_clipboard on + all Windows platforms, not just Cygwin. + + * readline.h (rl_paste_from_clipboard): Include declaration for + all Windows platforms. + + * display.c (insert_some_chars, delete_chars): Don't use the + MinGW-specific code if linked with ncurses. + + * configure.in: + * config.h.in: Support ncurses/termcap.h. The configure script + was updated accordingly. + + * complete.c [_WIN32 && !__CYGWIN__]: Initialize + _rl_completion_case_fold to 1. + (printable_part, rl_filename_completion_function) + [_WIN32 && !__CYGWIN__]: Handle the drive letter. + +2014-12-30 Eli Zaretskii + + * complete.c (stat_char) [_WIN32]: Don't use 'access' and X_OK on + Windows, they don't work. Instead, look at the file-name + extension to determine whether the file is executable. + +2014-09-22 Chen Gang + + Pushed by Joel Brobecker + * search.c (_rl_nsearch_init): Remove useless parameter '0' for + rl_message(). + +2013-09-24 Pierre Muller + + * readline.c (bind_arrow_keys_internal): + Handle VK_HOME, VK_END, VK_DELETE and VK_INSERT for mingw + hosts. + +2013-09-23 Martin Benda + + Checked in by Joel Brobecker + * util.c (_rl_strnicmp): Add missing semicolon. + +2013-05-22 Yao Qi + + * configure.in: Invoke AC_CANONICAL_BUILD. + Change $host_os to $build_os. + * configure: Regenerated. + +2012-10-18 Joel Brobecker + + * terminal.c: Remove duplicate includes of windows.h and + wincon.h. + (_rl_get_screen_size): Remove redundant code for MinGW getting + the console size from the Windows API. + +2012-02-24 Pierre Muller + + * signals.c (_rl_block_sigwinch, _rl_release_sigwinch): Add + conditional SIGWINCH around functions. + +2011-05-11 Sterling Augustine + + * complete.c (rl_completion_matches): Undo inadvertant checkin. + +2011-06-29 Jan Kratochvil + + Avoid free from a signal handler. + * Makefile.in (xfree.o): Add readline.h. + * xfree.c: Include stdio.h and readline.h. + (xfree): Return on RL_STATE_SIGHANDLER. + * xmalloc.h (xfree): New definition. + +2011-05-11 Jan Kratochvil + + Workaround gdb.base/completion.exp regression on readline-6.2. + * complete.c (get_y_or_n): Disable the return on RL_STATE_CALLBACK. + +2011-05-11 Jan Kratochvil + + Imported readline 6.2, and upstream patch 001. + * configure: Regenerate. + +2011-03-04 Michael Snyder + + * bind.c (rl_function_dumper): Free allocated memory. + +2009-08-22 Ralf Wildenhues + + * configure: Regenerate. + + * configure.in: m4_include toplevel config/override.m4. + * configure: Regenerate. + +2009-07-30 Ralf Wildenhues + + * Makefile.in (datarootdir): New variable. + * doc/Makefile.in (datarootdir): New variable. + * shlib/Makefile.in (datarootdir): New variable. + +2009-04-17 Carlos O'Donell + + * Makefile.in: Add html target. Add dummy install-html and + install-pdf targets. + +2008-08-10 Pedro Alves + + Build fixes for DJGPP. + + * signals.c (rl_set_sighandler): Guard access to SIGWINCH. + * wcwidth.c [__GO32__]: Include wctype.h before wchar.h. + +2008-03-24 Jan Kratochvil + + PR gdb/544 + * rltty.c (block_sigint, release_sigint): Rename to... + (_rl_block_sigint, _rl_release_sigint): ...these and make them global. + * rltty.h (_rl_block_sigint, _rl_release_sigint): New prototypes. + * display.c (rl_redisplay): Wrap the function by the calls to + _RL_BLOCK_SIGINT and _RL_RELEASE_SIGINT. + +2007-09-01 Daniel Jacobowitz + + PR gdb/2138 + From readline 5.2: + * configure.in (CROSS_COMPILE): Initialize to empty. + * configure: Regenerated. + +2007-03-27 Brooks Moses + + * Makefile.in: Add dummy "pdf" target. + +2006-11-13 Denis Pilat + + * terminal.c (_rl_get_screen_size): use wr and wc variable to store + window size. + +2006-10-21 Ulrich Weigand + + * callback.c: Include "xmalloc.h". + * Makefile.in: Add dependency. + +2006-04-24 Daniel Jacobowitz + + Imported readline 5.1, and upstream patches 001-004. + +2006-03-21 Denis Pilat + + * histfile.c (read_history_range): Remove '\r' character from + history lines. + +2005-02-10 Denis Pilat + + * readline/terminal.c (_rl_get_screen_size): Get console size from + the Windows API when compiling with MinGW. + +2005-07-25 Mark Mitchell + + * input.c (rl_getc): Use getch to read console input on + Windows. + * readline.c (bind_arrow_keys_internal): Translate + Windows keysequences into ANSI key sequences. + * rldefs.h (NO_TTY_DRIVER): Define on MinGW. + * rltty.c: Conditionalize on NO_TTY_DRIVER throughout. + +2005-07-03 Mark Kettenis + + From Martin Simmons: + * configure.in: Check for getpwnam instead of getpwname. + * configure: Regenerate. + +2005-05-09 Mark Mitchell + + * aclocal.m4: Use AC_TRY_LINK to check for mbstate_t. + * complete.c (pwd.h): Guard with HAVE_PWD_H. + (getpwent): Guard with HAVE_GETPWENT. + (rl_username_completion_function): Guard use of getpwent. + (endpwent): Likewise. + * config.h.in (HAVE_FCNTL): New macro. + (HAVE_GETPWENT): Likewise. + (HAVE_GETPWNAM): Likewise. + (HAVE_GETPWUID): Likewise. + (HAVE_KILL): Likewise. + (HAVE_PWD_H): Likewise. + * configure: Regenerated. + * configure.in: Handle MinGW when cross compiling. Check for + getpwnam, getpwent, getpwuid, kill, and pwd.h. + * display.c (rl_clear_screen): Treat Windows like DOS. + (insert_some_chars): Likewise. + (delete_chars): Likewise. + * shell.c (pwd.h): Guard with HAVE_PWD_H. + (getpwuid): Guard with HAVE_GETPWUID. + (sh_unset_nodelay_mode): Guard use of fnctl with HAVE_FNCTL_H. + * signals.c (rl_signal_handler): Don't use SIGALRM or + SIGQUIT if not defined. Use "raise" if "kill" is not available. + (rl_set_signals): Don't set handlers for SIGQUIT or SIGALRM if + they are not defined. + (rl_clear_signals): Likewise. + * tilde.c (pwd.h): Guard with HAVE_PWD_H. + (getpwuid): Guard declaration with HAVE_GETPWUID. + (getpwnam): Guard declaration with HAVE_GETPWNAM. + (tilde_expand_word): Guard use of getpwnam with HAVE_GETPWNAM. + +2004-02-19 Andrew Cagney + + * config.guess: Update from version 2003-06-12 to 2004-02-16. + * config.sub: Update from version 2003-06-13 to 2004-02-16. + +2004-01-27 Elena Zannoni + + Merge in official patches to readline-4.3 from + ftp://ftp.cwru.edu/pub/bash/readline-4.3-patches: + NOTE: Patch-ID readline-43-004 was already applied (see below). + + * bind.c (rl_generic_bind): Pressing certain key sequences + causes an infinite loop in _rl_dispatch_subseq with the `key' argument + set to 256. This eventually causes bash to exceed the stack size + limit and crash with a segmentation violation. + Patch-ID: readline43-001. + + * readline.c (_rl_dispatch_subseq): Repeating an edit in + vi-mode with `.' does not work. + Patch-ID: readline43-002. + + * mbutil.c (_rl_get_char_len, _rl_compare_chars, + _rl_adjust_point): When in a locale with multibyte characters, the + readline display updater will occasionally cause a + segmentation fault when attempting to compute the length of the first + multibyte character on the line. + Patch-ID: readline43-003. + + * vi_mode.c (_rl_vi_change_mbchar_case): Using the vi editing + mode's case-changing commands in a locale with multibyte characters + will cause garbage characters to be inserted into the editing buffer. + Patch-ID: readline43-005. + +2003-12-28 Eli Zaretskii + + * readline.c (rl_save_state, rl_restore_state): Support systems + that don't define SIGWINCH. + +2003-12-25 Eli Zaretskii + + * terminal.c (_rl_get_screen_size) [__DJGPP__]: Compute the + screen width and height using console I/O. + (_rl_init_terminal_io) [__MSDOS__]: Zero out all the _rl_term_* + variables. Convert to _rl_* naming scheme. + (_rl_set_cursor) [__MSDOS__]: Ifdef away this function. + +2003-12-23 Eli Zaretskii + + * display.c (_rl_move_vert) [__MSDOS__]: Don't use undeclared + variable `l'. Use `delta' instead recomputing its value anew. + Assign -delta to i instead of the other way around. + +2003-12-11 Michael Chastain + + * rlmbutil.h: Require HAVE_MBSTATE_T for HANDLE_MULTIBYTE. + Revert requirement of HAVE_MBRTOWC. Delete macro definitions + that attempted to fake mbstate_t if HAVE_MBSRTOCWS is defined + and HAVE_MBSTATE_T is not defined. + +2003-06-14 H.J. Lu + + * support/config.guess: Update to 2003-06-12 version. + * support/config.sub: Update to 2003-06-13 version. + +2003-05-25 Mark Kettenis + + * aclocal.m4: Don't add wcwidth.o if we don't have wchar.h. + * configure: Regenerate. + +2003-05-13 Andreas Jaeger + + * support/config.guess: Update to 2003-05-09 version. + * support/config.sub: Update to 2003-05-09 version. + +2003-03-03 Joel Brobecker + + * aclocal.m4: Add check for mbrtowc. + * config.h.in: Regenerate. + * configure: Regenerate. + * rlmbutil.h: Disable multi-byte if mbrtowc is not defined. + +2003-03-03 Kris Warkentin + + * aclocal.m4: Cause wcwidth check to substitute + HAVE_WCWIDTH for building. + * Makefile.in: Add wcwidth object to lib if required. + * shlib/Makefile.in: Likewise. + * configure: Regenerate. + +2003-01-09 Michael Chastain + + From Chet Ramey, , the readline maintainer: + ftp://ftp.cwru.edu/pub/bash/readline-4.3-patches/readline43-004 + + * display.c: Fix perverse screen refresh with UTF-8. + When running in a locale with multibyte characters, the + readline display updater will use carriage returns when + drawing the line, overwriting any partial output already on + the screen and not terminated by a newline. + Patch-ID: readline43-004 + +2003-01-08 Chris Demetriou + + * config.guess: Update to 2003-01-03 version. + * config.sub: Update to 2003-01-03 version. + +2002-12-16 Christopher Faylor + + * configure.in: Remove --enable-shared option. It shouldn't be used + for gdb. + * configure: Regenerate. + +2002-12-16 Christopher Faylor + + * config/cygwin.cache: Prime mbstate_t. + +2002-12-06 Elena Zannoni + + Import of readline 4.3. NB: This import includes those gdb + local changes that aren't in the official readline sources. + + * compat.c, mbutil.c, misc.c, rlmbutil.h, rltypedefs.h, + text.c, doc/history.0, doc/history.3, support/wcwidth.c, + examples/readlinebuf.h, examples/rlcat.c: New files. + + * CHANGELOG, CHANGES, INSTALL, MANIFEST, Makefile.in, README, + aclocal.m4, ansi_stdlib.h, bind.c, callback.c, chardefs.h, + complete.c, config.h.in, configure, configure.in, display.c, + emacs_keymap.c, funmap.c, histexpand.c, histfile.c, histlib.h, + history.c, history.h, histsearch.c, input.c, isearch.c, + keymaps.c, keymaps.h, kill.c, macro.c, nls.c, parens.c, + posixdir.h, readline.c, readline.h, rlconf.h, rldefs.h, + rlprivate.h, rlshell.h, rlstdc.h, rltty.c, savestring.c, + search.c, shell.c, signals.c, terminal.c, tilde.c, tilde.h, + undo.c, util.c, vi_keymap.c, vi_mode.c, xmalloc.c, xmalloc.h, + doc/Makefile.in, doc/hist.texinfo, doc/hstech.texinfo, + doc/hsuser.texinfo, doc/manvers.texinfo, doc/readline.3, + doc/rlman.texinfo, doc/rltech.texinfo, doc/rluser.texinfo + doc/rluserman.texinfo, doc/texi2dvi, doc/texi2html, + shlib/Makefile.in, support/install.sh, support/mkdirs, + support/mkdist, support/shlib-install, support/shobj-conf, + examples/Inputrc, examples/Makefile.in, examples/fileman.c, + examples/histexamp.c, examples/manexamp.c, examples/rl.c, + examples/rlfe.c, examples/rltest.c, examples/rlversion.c: + Modified files. + +2002-08-23 Andrew Cagney + + * support/config.guess: Import version 2002-08-23. + * support/config.sub: Import version 2002-08-22. + +2002-07-19 Chris Demetriou + + * support/config.guess: Update from ../config.guess. + * support/config.sub: Update from ../config.sub. + +2002-02-24 Elena Zannoni + + * ChangeLog.gdb: Renamed from ChangeLog.Cygnus. + +2002-02-24 Daniel Jacobowitz + + * support/config.guess: Import from master sources, rev 1.232. + * support/config.sub: Import from master sources, rev 1.246. + +2002-02-01 Ben Elliston + + * config.guess: Import from master sources, rev 1.229. + * config.sub: Import from master sources, rev 1.240. + +2002-01-17 H.J. Lu (hjl@gnu.org) + + * support/config.guess: Import from master sources, rev 1.225. + * support/config.sub: Import from master sources, rev 1.238. + +2001-07-20 Andrew Cagney + + * support/config.guess: Update using ../config.sub. + +2001-07-16 Andrew Cagney + + * support/config.sub: Update using ../config.sub. + +2001-06-15 Elena Zannoni + + * configure.in: Add -fsigned-char to LOCAL_CFLAGS for Linux + running on the IBM S/390. + * configure: Ditto. + +2001-01-07 Michael Sokolov + + * rltty.c (save_tty_chars): Fix compilation-stopping typo. + +2000-07-10 Eli Zaretskii + + * terminal.c (_rl_get_screen_size) [__DJGPP__]: Determine screen + size via DJGPP-specific calls. + (_rl_init_terminal_io) [__MSDOS__]: DJGPP-specific terminal + initialization. + (_rl_backspace) [__MSDOS__]: Don't call tputs. + (ding) [__MSDOS__]: Use DJGPP-specific calls to support visible + bell. + + * display.c (_rl_move_vert) [__MSDOS__]: Support cursor movement + upwards with DJGPP-specific calls. + (_rl_clear_to_eol) [__MSDOS__]: Don't call tputs. + (_rl_clear_screen) [__MSDOS__]: Support clear-screen with + DJGPP-specific calls. + (insert_some_chars) [__MSDOS__]: Don't call tputs. + (delete_chars) [__MSDOS__]: Don't call tputs. + +2000-07-08 Elena Zannoni + + * readline/readline.h: Ifdef out the export of savestring(). + It should not have been in the distribution. + +2000-07-07 Elena Zannoni + + * Import of readline 4.1. + + Locally modified files: Makefile.in, configure.in, configure + (regenerated), config.h.in (regenerated), rltty.c, + shell.c signals.c. + + Locally added files: acconfig.h, config/*, config.h.bot, + cross-build/*, doc/inc-hit.texinfo. + + New files: USAGE, rlprivate.h, rlshell.h, xmalloc.h. + +2000-03-16 Eli Zaretskii + + * support/shobj-conf: Shared libs are unsupported on MSDOS. + + * bind.c (_rl_read_file): Open files in binary mode. Strip CR + characters after reading the file. + (rl_re_read_init_file, rl_read_init_file): Allow for _inputrc on + DOS. + + * complete.c (username_completion_function): Don't bypass getpw* + function calls for DJGPP. + (Filename_completion_function): Handle d:foo/bar file names. + + * display.c (_rl_move_vert) [__GO32__]: fflush the stream, to make + sure cursor position is up to date. + (_rl_clear_screen) [__GO32__]: Clear screen and home the cursor. + (insert_some_characters, delete_characters) [__DJGPP__]: Don't use + memcpy. + + * histfile.c (read_history_range, history_truncate_file) + (history_do_write) [__MSDOS__]: Allow for underscore instead of + the leading dot in file names. + + * input.c: Don't use GO32-specific workarounds if HAVE_SELECT or + HAVE_TERMIOS_H are defined. + + * readline.c: Don't disable signals if __DJGPP__ is defined. + + * rltty.c: Don't disable signals and don't bypass termios code for + DJGPP (if HAVE_TERMIOS_H is defined). + + * signals.c: Don't disable signals for DJGPP. + + * terminal.c (_rl_get_screen_size) [__DJGPP__]: Initialize screen + dimensions. + (ding) [__DJGPP__]: Support visual bell. + +1999-08-13 Elena Zannoni + + From Philippe De Muyter + * shell.c (stdio.h): File included, for definition of NULL. + * readline/rltty.c (get_tty_settings): Conditionalize + call to set_winsize on TIOGWINSZ. + +1999-07-30 Elena Zannoni + + * Imported Readline 4.0. Integrated all the Cygnus + local changes since last import. + + New files: rlstdc.h, savestring.c, shlib directory, + doc/manvers.texinfo, examples/rlversion.c, + support/install-shlib, support/shobj-conf. + + Removed files: MANIFEST.doc, doc/inc-hist.texi. + +1999-07-13 Elena Zannoni + + * acconfig.h: Fix typo: it's GWINSZ_IN_SYS_IOCTL, not + TIOCGWINSZ_IN_SYS_IOCTL. + + * config.h.in: Regenerate with autoheader. + +1999-04-27 Elena Zannoni + + * ChangeLog.Cygnus: new file. It is the old Changelog. + * ChangeLog: removed. It was conflicting with CHANGELOG + on Windows. + +1999-04-22 Jason Molenda (jsm@bugshack.cygnus.com) + + * Makefile.in (install): Make comment about this change more explicit. + +1999-04-22 Jason Molenda (jsm@bugshack.cygnus.com) + + * Makefile.in (install): Don't install the final libreadline.a + or .h files. + +Tue Mar 23 10:56:08 1999 Elena Zannoni + + Patches from Robert Hoehne : + + * display.c: Change some terminal calls to work on DJGPP. + * terminal.c: Likewise. + * Makefile.in: Remove . from the VPATH directive. + +Tue Mar 9 14:58:13 1999 Geoffrey Noer + + * support/config.sub: Recognize cygwin*, not just cygwin32. + +Tue Feb 9 10:38:57 1999 Elena Zannoni + + * configure.in: Do not use the ./support directory. + * configure: Regenerate. + +Wed Jan 6 12:24:19 1999 Christopher Faylor + + * configure.in: Use LOCAL_CFLAGS rather than CFLAGS for + searching libtermcap directory. + * configure: Regenerate. + +Thu Dec 31 12:07:01 1998 Christopher Faylor + + * configure.in: Search devo libtermcap directory for termcap.h + when compiling for cygwin. + * configure: Regenerated. + +1998-12-30 Michael Meissner + + * Makefile.in (install): Only try to copy libreadline.a and + libhistory.a if they exist. + +Tue Dec 29 23:49:20 1998 Christopher Faylor + + * cross-build/cygwin.cache: Add a couple more known settings. + * configure.in: Fix typo. + * configure: Regenerated. + +Tue Dec 29 18:11:28 1998 Elena Zannoni + + * cross-build: new directory. + + * cross-build/cygwin.cache: new file. Used for Cygwin cross builds. + + * configure.in: added tests for cross-build for Cygwin. + +1998-12-24 Jason Molenda (jsm@bugshack.cygnus.com) + + * Makefile.in: Add CYGNUS LOCAL comment. + * acconfig.h: Add missing defines. + * config.h.bot: Add missing content. + * configure, config.h.in: Regenerated. + +Wed Dec 23 16:21:41 1998 Elena Zannoni + + * Makefile.in: comment out the rule to rebuild configure by + running autoconf. + +Tue Dec 22 10:00:30 1998 Elena Zannoni + + * shell.c (savestring): ifdef'd it out. + + * Imported new version of Readline 2.2.1. Removed all the Cygnus + local changes. + + New files: acconfig.h, aclocal.m4, ansi_stdlib.h, callback.c, + config.h.in, configure, histexpand.c, histfile.c, histlib.h, + histsearch.c, input.c, kill.c, macro.c, nls.c, posixdir.h, + posixjmp.h, posixstat.h, rlconf.h, rltty.h, rlwinsize.h, shell.c, + tcap.h, terminal.c, undo.c, util.c, support directory. + + Removed files: sysdep*, config directory. + + +Fri Dec 4 15:25:41 1998 David Taylor + + The following changes were made by Jim Blandy + and David Taylor + as part of a project to merge in changes + made by HP; HP did not create ChangeLog entries. + + * config/mp-enable-tui: New file. + (TUI_CFLAGS): Search devo's include directory, as long as we're + totally ruining modularity. + (INCLUDE_SRCDIR): New var. + (GDB_TUI_SRCDIR): Fix syntax error. + + * configure.in: Check the --enable-tui flag; if it's set, include + a makefile fragment that #defines TUI and adds the needed #include + directories. + (*-*-hpux*): New host; use sysdep-hpux.h. + + * Makefile.in (.c.o): Check the variable set in the makefile + fragment above. + + * display.c (term_goto): declare it. + (insert_some_chars): set it. + (delete_chars): set it. + + * readline.c: add tui include files surrounded by TUI. + (rl_reset): new function, move some of rl_abort functionality to + here. + (rl_abort): call rl_reset. + (rl_getc): tui changes. + (init_terminal_io): tui changes. + + * readline.h (tui_version, fputc_unfiltered, fputs_unfiltered, + tui_tputs): declare if TUI is defined. + + * rltty.c (prepare_terminal_settings): additional comment. + + * signals.c: add tui include files surrounded by TUI. move #if + and #endif to column 1 so HP's compiler will accept them. Remove + declaration of tuiDoAndReturnToTop since it's declared in tui.h. + (rl_handle_sigwinch): call tuiDoAndReturnToTop if TUI defined. + (rl_handle_sigwinch_on_clear): define if TUI defined. + (rl_set_signals): if TUI, avoid infinite recursion. + (rl_clear_signals): install rl_handle_sigwinch_on_clear. + + * sysdep-hpux.h: New file. + +Mon Nov 2 15:26:33 1998 Geoffrey Noer + + * configure.in: Check cygwin* instead of cygwin32*. + +Tue Jul 28 09:43:27 1998 Jeffrey A Law (law@cygnus.com) + + * sysdep-hpux11.h: New file. + * configure.in (*-*-*-hpux11*): Use sysdep-hpux11.h. + +Thu Jul 23 17:48:21 1998 Ian Lance Taylor + + * configure.bat: Remove obsolete file. + * examples/configure.bat: Remove obsolete file. + +Wed May 13 13:41:53 1998 Ian Lance Taylor + + * sysdep-6irix.h: New file. + * configure.in (*-*-irix6*): New host; use sysdep-6irix.h. + + * Makefile.in (isearch.o, search.o): Depend upon sysdep.h. + (Makefile): Depend upon $(srcdir)/configure.in. + +Thu Apr 9 11:59:38 1998 Ian Dall ( + + * configure.in (host==netbsd): Include config/mh-bsd44. + * config/mh-bsd44: New file. + +Wed Dec 3 16:48:20 1997 Michael Snyder (msnyder@cleaver.cygnus.com) + + * rltty.c: fix typos. + +Tue Oct 8 08:59:24 1996 Stu Grossman (grossman@critters.cygnus.com) + + * tilde.c (tilde_word_expand): __MSDOS___ -> __MSDOS__ + +Sat Oct 05 11:24:34 1996 Mark Alexander + + * rldefs.h: On Linux, include to fix compile error + in . + +Wed Sep 4 18:06:51 1996 Stu Grossman (grossman@critters.cygnus.com) + + * rldefs.h: Enable HANDLE_SIGNALS for cygwin32. + +Thu Aug 29 16:59:45 1996 Michael Meissner + + * configure.in (i[345]86-*-*): Recognize i686 for pentium pro. + +Fri Aug 16 17:49:57 1996 Stu Grossman (grossman@critters.cygnus.com) + + * complete.c: Include if not DOS, and if cygwin32 or not + win32. + * configure.in: Add test for *-*-cygwin32* to use config/mh-posix. + * readline.c: Move decl of tgetstr to rldefs.h. + * (_rl_set_screen_size): Remove redundant ifdef MINIMALs. + * rldefs.h: Don't do MINIMAL for cygwin32. Cygwin32 now uses + full-blown readline, except for termcap. + +Sun Aug 11 21:06:26 1996 Stu Grossman (grossman@critters.cygnus.com) + + * rldefs.c: Get rid of define of SIGALRM if _WIN32 or __MSDOS__. + * Don't define ScreenCols/ScreenRows/... if cygwin32. + * sysdep-norm.h: Don't include if cygwin32. + +Sun Aug 11 14:59:09 1996 Fred Fish + + * rldefs.h: If __osf__is defined, include instead of + . + +Fri Aug 9 08:54:26 1996 Stu Grossman (grossman@critters.cygnus.com) + + * bind.c complete.c history.c readline.c: Don't include sys/file.h. + * complete.c display.c parens.c readline.c rldefs.h rltty.c + signals.c tilde.c: Change refs to _MSC_VER and __WIN32__ to _WIN32. + * signals.c (rl_signal_handler): Ifdef out kill if _WIN32. + * sysdep-norm.h: Ifdef out include of dirent.h if _WIN32. + Include malloc.h if _WIN32. + +Thu Jul 18 15:59:35 1996 Michael Meissner + + * rldefs.h (sys/uio.h) Before sys/stream.h is included under AIX, + include sys/uio.h, which prevents an undefined structure used in a + prototype message from being generated. + +Tue Jun 25 23:05:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) + + * Makefile.in (datadir): Set to $(prefix)/share. + (docdir): Removed. + +Sun May 26 15:14:42 1996 Fred Fish + + From: David Mosberger-Tang + + * sysdep-linux.h: New file. + * display.c: Add include of "sysdep.h" to get HAVE_VARARGS_H. + * configure.in: Change pattern i[345]86-*-linux* into *-*-linux* to + support non-x86 based Linux platforms. + +Sun Apr 7 22:06:11 1996 Fred Fish + + From: Miles Bader + * config/mh-gnu: New file. + * configure.in (*-*-gnu*): New host. + +Sun Apr 7 13:21:51 1996 Fred Fish + + From: Robert Lipe + * configure.in: SCO OpenServer 5 (a.k.a 3.2v5*) is more like + SCO 3.2v4 than 3.2v2. + +Wed Jan 3 18:22:10 1996 steve chamberlain + + * readline.c, display.c, complete.c: Add _MSC_VER to list of + things which can't do most things. + +Thu Nov 16 15:39:05 1995 Geoffrey Noer + + * complete.c: Change WIN32 to __WIN32__, added #else return NULL + to end of that define. + +Tue Oct 31 10:38:58 1995 steve chamberlain + + * display.c, parens.c, readline.c, rldefs.h: Change use of + WIN32 to __WIN32__. + +Tue Oct 10 11:07:23 1995 Fred Fish + + * Makefile.in (BISON): Remove macro. + +Tue Oct 10 08:49:00 1995 steve chamberlain + + * complete.c (filename_completion_function): Enable for + win32 when not MSC. + +Sun Oct 8 04:17:19 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * configure.in: Handle powerpc-ibm-aix* like rs6000-ibm-aix*. + +Sat Oct 7 20:36:16 1995 Michael Meissner + + * rltty.c (outchar): Return an int, like tputs expects. + * signals.c (_rl_output_character_function): Ditto. + +Fri Sep 29 15:19:23 1995 steve chamberlain + + Fixes for when the host WIN32, but not MSC. + * complete.c: Sometimes have pwd.h + * parens.c: WIN32 has similar restrictions to __GO32__. + * readline.c (__GO32__): Some of this moved into rldefs.h + * signals.c (__GO32__): Likewise. + * rldefs.h (MSDOS||WIN32) becomes MSDOS||MSC. + (WIN32&&!WIN32): New definitions. + +Wed Sep 20 12:57:17 1995 Ian Lance Taylor + + * Makefile.in (maintainer-clean): New synonym for realclean. + +Wed Mar 1 13:33:43 1995 Michael Meissner + + * rltty.c (outchar): Provide prototype for outchar, to silence + type warnings in passing outchar to tputs on systems like Linux + that have full prototypes. + + * signals.c (_rl_output_character_function): Provide prototype to + silence type warnings. + +Sun Jan 15 14:10:37 1995 Steve Chamberlain + + * rldefs.h: Define MINIMAL for __GO32__ and WIN32. + * complete.c, display.c, readline.c, rltty.c: Test MINIMAL + instead of __GO32__. + +Wed Aug 24 13:04:47 1994 Ian Lance Taylor (ian@sanguine.cygnus.com) + + * configure.in: Change i[34]86 to i[345]86. + +Sat Jul 16 13:26:31 1994 Stan Shebs (shebs@andros.cygnus.com) + + * configure.in (m88*-harris-cxux7*): Recognize. + * sysdep-cxux7.h: New file. + +Fri Jul 8 13:18:33 1994 Steve Chamberlain (sac@jonny.cygnus.com) + + * rttty.c (control_meta_key_on): Remove superfluous testing of + __GO32__. + +Thu Jun 30 15:21:54 1994 Steve Chamberlain (sac@jonny.cygnus.com) + + * rltty.c (control_meta_key_on): Don't compile if __GO32__ is + defined. + (rltty_set_default_bindings): Likewise. + * display.c (insert_some_chars, delete_chars): row_start should be + a short. + * parens.c (rl_insert_close): No FD_SET if using __GO32__. + * readline.c (rl_gather_tyi): Strip off spurious high bits. + +Sun Jun 12 03:51:52 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * history.c: Swap inclusion of rldefs.h and chardefs.h to avoid + CTRL macro redefinition. + +Mon May 9 18:29:42 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com) + + * readline.c (readline_default_bindings): Don't compile if + __GO32__ is defined. + (_rl_set_screen_size): Likewise. + * rltty.c (rltty_set_default_bindings): Likewise. + (control_meta_key): Likewise. + * display.c: If __GO32__ is defined, include . + * parens.c: If __GO32__ is defined, undefine FD_SET. + * signals.c: Include SIGWINCH handling in the set of things which + is not done if HANDLE_SIGNALS is not set. + +Fri May 6 13:38:39 1994 Steve Chamberlain (sac@cygnus.com) + + * config/mh-go32: New fragment. + * configure.in (host==go32): Use go32 fragment. + +Wed May 4 14:36:53 1994 Stu Grossman (grossman@cygnus.com) + + * chardefs.h, rldefs.h: Move decls of string funcs from chardefs.h + to rldefs.h so that they don't pollute apps that include + readline.h. + * history.c: include rldefs.h to get decls of string funcs. + +Wed May 4 12:15:11 1994 Stan Shebs (shebs@andros.cygnus.com) + + * configure.in (rs6000-bull-bosx*): New configuration, RS/6000 + variant. + +Wed Apr 20 10:43:52 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Use mh-posix for sunos4.1*. + +Wed Apr 13 21:28:44 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * rltty.c (set_tty_settings): Don't set readline_echoing_p. + (rl_deprep_terminal) [NEW_TTY_DRIVER]: Set readline_echoing_p. + +Sun Mar 13 09:13:12 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Add TAGS target. + +Wed Mar 9 18:01:31 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * isearch.c, search.c: Include sysdep.h. + +Thu Mar 3 17:40:03 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * configure.in: For ISC, use mh-sysv, not mh-isc. + +Thu Feb 24 04:13:53 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) + + * Merge in changes from bash-1.13.5. Merge changes from glob/tilde.c + into tilde.c and use it. Add system function declarations where + necessary. Check for __GO32__, not _GO32_ consistently. + * Makefile.in: Update dependencies. + * rltty.c: Include to match include file setup + in readline.c for rldefs.h. Otherwise we get inconsistent + TTY_DRIVER definitions in readline.c and rltty.c. + * bind.c, complete.c: Do not include , it is already + included via sysdep.h, which causes problems if has + no multiple inclusion protection. + * readline.c (_rl_set_screen_size): Reestablish test for + TIOCGWINSZ_BROKEN. + * rldefs.h: Define S_ISREG if necessary. + +Fri Feb 18 08:56:35 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Add search.o rule for Sun make. + +Wed Feb 16 16:35:49 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * rltty.c: #if out some code if __GO32__. + +Tue Feb 15 14:07:08 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * readline.c (_rl_output_character_function), display.c: + Return int, not void, to conform with the expected arg of tputs. + * readline.c (init_terminal_io): tgetflag only takes 1 arg. + * readline.c (_rl_savestring): New function. + * chardefs.h: To avoid conflicts and/or warnings, define + savestring as a macro wrapper for _rl_savestring. + * display.c (extern term_xn): It's an int flag, not a string. + * charsdefs.h, rldefs.h: Remove HAVE_STRING_H-related junk. + +Sat Feb 5 08:32:30 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * Makefile.in: Remove obsolete rules for history.info and + readline.info. + +Thu Jan 27 17:04:01 1994 Jim Kingdon (kingdon@deneb.cygnus.com) + + * chardefs.h: Only declare strrchr if it is not #define'd. + +Tue Jan 25 11:30:06 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * rldefs.h: Accept __hpux as well as hpux for HP compiler in ANSI mode. + +Fri Jan 21 17:31:26 1994 Jim Kingdon (kingdon@lisa.cygnus.com) + + * chardefs.h, tilde.c: Just declare strrchr rather than trying to + include a system header. + +Fri Jan 21 14:40:43 1994 Fred Fish (fnf@cygnus.com) + + * Makefile.in (distclean, realclean): Expand local-distclean + inline after doing recursion. You can't recurse after removing + Makefile. Make them depend on local-clean. + * Makefile.in (local-distclean): Remove now superfluous target. + +Mon Jan 17 12:42:07 1994 Ken Raeburn (raeburn@cujo.cygnus.com) + + * readline.c (doing_an_undo): Delete second declaration, since it + confuses the alpha-osf1 native compiler. + +Sun Jan 16 12:33:11 1994 Jim Kingdon (kingdon@lioth.cygnus.com) + + * complete.c, bind.c: Include . + * complete.c: Define X_OK if not defined by a system header. + + * chardefs.h: Don't declare xmalloc. + + * keymaps.h: Include "chardefs.h" not . + + * Makefile.in (clean mostlyclean distclean realclean): Recurse + into subdirectories as well as doing this directory. Add clean-dvi + target. + +Sat Jan 15 19:36:12 1994 Per Bothner (bothner@kalessin.cygnus.com) + + * readline.c, display.c: Patches to allow use of all 80 + columns on most terminals (those with am and xn). + + Merge in changes from bash-1.13. The most obvious one is + that the file readline.c has been split into multiple files. + * bind.c, complete.c, dispay.c, isearch.c, parens.c, rldefs.h, + rltty.c, search.c signals.c, tilde.c, tilde.h, xmalloc.c: New files. + +Sat Dec 11 16:29:17 1993 Steve Chamberlain (sac@thepub.cygnus.com) + + * readline.c (rl_getc): If GO32, trim high bit from getkey, + otherwise fancy PC keys cause grief. + +Fri Nov 5 11:49:47 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add doc to configdirs. + * Makefile.in (info dvi install-info clean-info): Recurse into doc. + +Fri Oct 22 07:55:08 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add * to end of all OS names. + +Tue Oct 5 12:33:51 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * readline.c: Add stuff for HIUX to place where we detect termio + vs. sgtty (ugh, but I don't see a simple better way). + +Wed Sep 29 11:02:58 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * readline.c (parser_if): Free tname when done with it (change + imported from from bash 1.12 readline). + +Tue Sep 7 17:15:37 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in (m88k-*-sysvr4*): Comment out previous change. + +Fri Jul 2 11:05:34 1993 Ian Lance Taylor (ian@cygnus.com) + + * configure.in (*-*-riscos*): New entry; use mh-sysv. + +Wed Jun 23 13:00:12 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * configure.in: Add comment. + +Mon Jun 14 14:28:55 1993 Jim Kingdon (kingdon@eric) + + * configure.in (m88k-*-sysvr4*): Use sysdep-norm.h. + +Sun Jun 13 13:04:09 1993 Jim Kingdon (kingdon@cygnus.com) + + * Makefile.in ({real,dist}clean): Remove sysdep.h. + +Thu Jun 10 11:22:41 1993 Jim Kingdon (kingdon@cygnus.com) + + * Makefile.in: Add mostlyclean, distclean, and realclean targets. + +Fri May 21 17:09:28 1993 Jim Kingdon (kingdon@lioth.cygnus.com) + + * config/mh-isc: New file. + * configure.in: Use it. + +Sat Apr 17 00:40:12 1993 Jim Kingdon (kingdon at calvin) + + * readline.c, history.c: Don't include sys/types.h; sysdep.h does. + + * config/mh-sysv: Define TIOCGWINSZ_BROKEN. + readline.c: Check it. + +Wed Mar 24 02:06:15 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com) + + * Makefile.in: add installcheck & dvi targets + +Fri Mar 12 18:36:53 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: recognize *-*-solaris2* instead of *-*-solaris* (a + number of people want to call SunOS 4.1.2 "solaris1.0" + and get it right) + +Tue Mar 2 21:25:36 1993 Fred Fish (fnf@cygnus.com) + + * sysdep-sysv4.h: New file for SVR4. + * configure.in (*-*-sysv4*): Use sysdep-sysv4.h. + + * configure.in (*-*-ultrix2): Add triplet from Michael Rendell + (michael@mercury.cs.mun.ca) + +Tue Dec 15 12:38:16 1992 Ian Lance Taylor (ian@cygnus.com) + + * configure.in (i[34]86-*-sco3.2v4*): use mh-sco4. + * config/mh-sco4: New file, like mh-sco but without defining + _POSIX_SOURCE. + +Wed Nov 11 21:20:14 1992 John Gilmore (gnu@cygnus.com) + + * configure.in: Reformat to one-case-per-line. + Handle SunOS 3.5, as per Karl Berry, . + +Wed Nov 4 15:32:31 1992 Stu Grossman (grossman at cygnus.com) + + * sysdep-norm.h: Remove some crud, install dire warning. + +Thu Oct 22 01:08:13 1992 Stu Grossman (grossman at cygnus.com) + + * configure.in: Make SCO work again... + +Mon Oct 12 15:04:07 1992 Ian Lance Taylor (ian@cygnus.com) + + * readline.c (init_terminal_io): if tgetent returns 0, the + terminal type is unknown. + +Thu Oct 1 23:44:14 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: use cpu-vendor-os triple instead of nested cases + +Wed Sep 30 12:58:57 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (rl_complete_internal): Cast alloca to (char *) to + avoid warning. + +Fri Sep 25 12:45:05 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (clear_to_eol, rl_generic_bind): Make static. + (rl_digit_loop): Add arg to call to rl_message(). + * vi_mode.c (rl_vi_first_print): Add arg to call to + rl_back_to_indent(). + +Wed Aug 19 14:59:07 1992 Ian Lance Taylor (ian@cygnus.com) + + * Makefile.in: always create installation directories, use full + file name for install target. + +Wed Aug 12 15:50:57 1992 John Gilmore (gnu@cygnus.com) + + * readline.c (last_readline_init_file): Fix typo made by Steve + Chamberlain/DJ Delorie. Proper control file name is ~/.inputrc, + not ~/inputrc. + +Thu Jun 25 16:15:27 1992 Stu Grossman (grossman at cygnus.com) + + * configure.in: Make bsd based systems use sysdep-obsd.h. + +Tue Jun 23 23:22:53 1992 Per Bothner (bothner@cygnus.com) + + * config/mh-posix: New file, for Posix-compliant systems. + * configure.in: Use mh-posix for Linux (free Unix clone). + +Tue Jun 23 21:59:20 1992 Fred Fish (fnf@cygnus.com) + + * sysdep-norm.h (alloca): Protect against previous definition as + a macro with arguments. + +Fri Jun 19 15:48:54 1992 Stu Grossman (grossman at cygnus.com) + + * sysdep-obsd.h: #include to make this more Kosher. + +Fri Jun 19 12:53:28 1992 John Gilmore (gnu at cygnus.com) + + * config/mh-apollo68v, mh-sco, mh-sysv, mh-sysv4}: RANLIB=true. + +Mon Jun 15 13:50:34 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com) + + * configure.in: use mh-sysv4 on solaris2 + +Mon Jun 15 12:28:24 1992 Fred Fish (fnf@cygnus.com) + + * config/mh-ncr3000 (INSTALL): Don't use /usr/ucb/install, + it is broken on ncr 3000's. + * config/mh-ncr3000 (RANLIB): Use RANLIB=true. + +Mon Jun 15 01:35:55 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: Make new SIGNALS_* macros to parameterize the + ugly changes in signal blocking. Use them throughout, + reducing #ifdef HAVE_POSIX_SIGNALS and HAVE_BSD_SIGNALS clutter + significantly. Make all such places use POSIX if available, + to avoid losing with poor `sigsetmask' emulation from libiberty. + +Sun Jun 14 15:19:51 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (insert_some_chars): Return void. + +Thu Jun 11 01:27:45 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: #undef PC, which Solaris2 defines in sys/types.h, + clobbering the termcap global variable PC. + +Tue Jun 9 17:30:23 1992 Fred Fish (fnf@cygnus.com) + + * config/{mh-ncr3000, mh-sysv4}: Change INSTALL to use + /usr/ucb/install. + +Mon Jun 8 23:10:07 1992 Fred Fish (fnf@cygnus.com) + + * readline.h (rl_completer_quote_characters): Add declaration. + * readline.c (rl_completer_quote_characters): Add global var. + * readline.c (strpbrk): Add prototype and function. + * readline.c (rl_complete_internal): Add code to handle + expansion of quoted strings. + +Mon May 11 12:39:30 1992 John Gilmore (gnu at cygnus.com) + + * readline.c: Can't initialize FILE *'s with stdin and stdout, + because they might not be constant. Patch from Tom Quinn, + trq@dinoysos.thphys.ox.ac.uk. + +Tue Apr 28 21:52:34 1992 John Gilmore (gnu at cygnus.com) + + * readline.h: Declare rl_event_hook (which already existed). + Suggested by Christoph Tietz . + +Wed Apr 22 18:08:01 1992 K. Richard Pixley (rich@rtl.cygnus.com) + + * configure.in: remove subdirs declaration. The obsolete semantic + for subdirs has been usurped by per's new meaning. + +Tue Apr 21 11:54:23 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in: rework CFLAGS so that they can be set on the + command line to make. Remove MINUS_G. Default CFLAGS to -g. + +Fri Apr 10 23:02:27 1992 Fred Fish (fnf@cygnus.com) + + * configure.in: Recognize new ncr3000 config. + * config/mh-ncr3000: New NCR 3000 config file. + +Wed Mar 25 10:46:30 1992 John Gilmore (gnu at cygnus.com) + + * history.c (stifle_history): Negative arg treated as zero. + +Tue Mar 24 23:46:20 1992 K. Richard Pixley (rich@cygnus.com) + + * config/mh-sysv: INSTALL_PROG -> INSTALL. + +Mon Feb 10 01:41:35 1992 Brian Fox (bfox at gnuwest.fsf.org) + + * history.c (history_do_write) Build a buffer of all of the lines + to write and write them in one fell swoop (lower overhead than + calling write () for each line). Suggested by Peter Ho. + + * vi_mode.c (rl_vi_subst) Don't forget to end the undo group. + +Sat Mar 7 00:15:36 1992 K. Richard Pixley (rich@rtl.cygnus.com) + + * Makefile.in: remove FIXME's on info and install-info targets. + +Fri Mar 6 22:02:04 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in: added check target. + +Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com) + + * Makefile.in, configure.in: removed traces of namesubdir, + -subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced + copyrights to '92, changed some from Cygnus to FSF. + +Fri Feb 21 14:37:32 1992 Steve Chamberlain (sac at rtl.cygnus.com) + + * readline.c, examples/fileman.c: patches from DJ to support DOS + +Thu Feb 20 23:23:16 1992 Stu Grossman (grossman at cygnus.com) + + * readline.c (rl_read_init_file): Make sure that null filename is + not passed to open() or else we end up opening the directory, and + read a bunch of garbage into keymap[]. + +Mon Feb 17 17:15:09 1992 Fred Fish (fnf at cygnus.com) + + * readline.c (readline_default_bindings): Only make use of VLNEXT + when both VLNEXT and TERMIOS_TTY_DRIVER is defined. On SVR4 + includes , so VLNEXT is always defined. + + * sysdep-norm.h (_POSIX_VERSION): Define this for all SVR4 + systems so that gets used, instead of . + +Fri Dec 20 12:04:31 1991 Fred Fish (fnf at cygnus.com) + + * configure.in: Change svr4 references to sysv4. + +Tue Dec 10 04:07:20 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: infodir belongs in datadir. + +Fri Dec 6 23:23:14 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: remove spaces following hyphens, bsd make can't + cope. added clean-info. added standards.text support. Don't + know how to make info anymore. + + * configure.in: commontargets is no longer a recognized hook, so + remove it. new subdir called doc. + +Thu Dec 5 22:46:10 1991 K. Richard Pixley (rich at rtl.cygnus.com) + + * Makefile.in: idestdir and ddestdir go away. Added copyrights + and shift gpl to v2. Added ChangeLog if it didn't exist. docdir + and mandir now keyed off datadir by default. + +Fri Nov 22 09:02:32 1991 John Gilmore (gnu at cygnus.com) + + * sysdep-obsd.h: Rename from sysdep-newsos.h. + * configure.in: Use sysdep-obsd for Mach as well as NEWs. + + * sysdep-norm.h, sysdep-aix.h: Add , which POSIX + requires to make work. Improve Sun alloca decl. + +Thu Nov 21 18:48:08 1991 John Gilmore (gnu at cygnus.com) + + * Makefile.in: Clean up ../glob/tilde.c -> tilde.o path. + Clean up makefile a bit in general. + +Thu Nov 21 14:40:29 1991 Stu Grossman (grossman at cygnus.com) + + * configure.in, config/mh-svr4: Make SVR4 work. + + * readline.c: Move config stuff to sysdep.h, use typedef dirent + consistently, remove refs to d_namlen (& D_NAMLEN) to improve + portability. Also, update copyright notice. + readline.h: remove config stuff that I added erroneously in the + first place. + + * emacs_keymap.c, funmap.c, history.c, keymaps.c, vi_keymap.c, + vi_mode.c: move config stuff to sysdep.h, update copyright notices. + +Tue Nov 19 15:02:13 1991 Stu Grossman (grossman at cygnus.com) + + * history.c: #include "sysdep.h". + +Tue Nov 19 10:49:17 1991 Fred Fish (fnf at cygnus.com) + + * Makefile.in, config/hm-sysv, config/hm-sco: Change SYSV to + USG to match current usage. + + * readline.c: Add USGr4 to list of defined things to check for + to use style directory access. + + * config/hm-svr4: New file for System V Release 4 (USGr4). + +Mon Nov 18 23:59:52 1991 Stu Grossman (grossman at cygnus.com) + + * readline.c (filename_completion_function): use struct dirent + instead of struct direct. + +Fri Nov 1 07:02:13 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (rl_translate_keyseq) Make C-? translate to RUBOUT + unconditionally. + +Mon Oct 28 11:34:52 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c; Use Posix directory routines and macros. + + * funmap.c; Add entry for call-last-kbd-macro. + + * readline.c (rl_prep_term); Use system EOF character on POSIX + systems also. + +Thu Oct 3 16:19:53 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c; Make a distinction between having a TERMIOS tty + driver, and having POSIX signal handling. You might one without + the other. New defines used HAVE_POSIX_SIGNALS, and + TERMIOS_TTY_DRIVER. + +Tue Jul 30 22:37:26 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_getc () If a call to read () returns without an + error, but with zero characters, the file is empty, so return EOF. + +Thu Jul 11 20:58:38 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: (rl_get_next_history, rl_get_previous_history) + Reallocate the buffer space if the line being moved to is longer + the the current space allocated. Amazing that no one has found + this bug until now. + +Sun Jul 7 02:37:05 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c:(rl_parse_and_bind) Allow leading whitespace. + Make sure TERMIO and TERMIOS systems treat CR and NL + disctinctly. + +Tue Jun 25 04:09:27 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: Rework parsing conditionals to pay attention to the + prior states of the conditional stack. This makes $if statements + work correctly. + +Mon Jun 24 20:45:59 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: support for displaying key binding information + includes the functions rl_list_funmap_names (), + invoking_keyseqs_in_map (), rl_invoking_keyseqs (), + rl_dump_functions (), and rl_function_dumper (). + + funmap.c: support for same includes rl_funmap_names (). + + readline.c, funmap.c: no longer define STATIC_MALLOC. However, + update both version of xrealloc () to handle a null pointer. + +Thu Apr 25 12:03:49 1991 Brian Fox (bfox at gnuwest.fsf.org) + + * vi_mode.c (rl_vi_fword, fWord, etc. All functions use + the macro `isident()'. Fixed movement bug which prevents + continious movement through the text. + +Fri Jul 27 16:47:01 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (parser_if) Allow "$if term=foo" construct. + +Wed May 23 16:10:33 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c (rl_dispatch) Correctly remember the last command + executed. Fixed typo in username_completion_function (). + +Mon Apr 9 19:55:48 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: username_completion_function (); For text passed in + with a leading `~', remember that this could be a filename (after + it is completed). + +Thu Apr 5 13:44:24 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_search_history (): Correctly handle case of an + unfound search string, but a graceful exit (as with ESC). + + * readline.c: rl_restart_output (); The Apollo passes the address + of the file descriptor to TIOCSTART, not the descriptor itself. + +Tue Mar 20 05:38:55 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * readline.c: rl_complete (); second call in a row causes possible + completions to be listed. + + * readline.c: rl_redisplay (), added prompt_this_line variable + which is the first character character following \n in prompt. + +Sun Mar 11 04:32:03 1990 Brian Fox (bfox at gnuwest.fsf.org) + + * Signals are now supposedly handled inside of SYSV compilation. + +Wed Jan 17 19:24:09 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * history.c: history_expand (); fixed overwriting memory error, + added needed argument to call to get_history_event (). + +Thu Jan 11 10:54:04 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * readline.c: added mark_modified_lines to control the + display of an asterisk on modified history lines. Also + added a user variable called mark-modified-lines to the + `set' command. + +Thu Jan 4 10:38:05 1990 Brian Fox (bfox at sbphy.ucsb.edu) + + * readline.c: start_insert (). Only use IC if we don't have an im + capability. + +Fri Sep 8 09:00:45 1989 Brian Fox (bfox at aurel) + + * readline.c: rl_prep_terminal (). Only turn on 8th bit + as meta-bit iff the terminal is not using parity. + +Sun Sep 3 08:57:40 1989 Brian Fox (bfox at aurel) + + * readline.c: start_insert (). Uses multiple + insertion call in cases where that makes sense. + + rl_insert (). Read type-ahead buffer for additional + keys that are bound to rl_insert, and insert them + all at once. Make insertion of single keys given + with an argument much more efficient. + +Tue Aug 8 18:13:57 1989 Brian Fox (bfox at aurel) + + * readline.c: Changed handling of EOF. readline () returns + (char *)EOF or consed string. The EOF character is read from the + tty, or if the tty doesn't have one, defaults to C-d. + + * readline.c: Added support for event driven programs. + rl_event_hook is the address of a function you want called + while Readline is waiting for input. + + * readline.c: Cleanup time. Functions without type declarations + do not use return with a value. + + * history.c: history_expand () has new variable which is the + characters to ignore immediately following history_expansion_char. + +Sun Jul 16 08:14:00 1989 Brian Fox (bfox at aurel) + + * rl_prep_terminal () + BSD version turns off C-s, C-q, C-y, C-v. + + * readline.c -- rl_prep_terminal () + SYSV version hacks readline_echoing_p. + BSD version turns on passing of the 8th bit for the duration + of reading the line. + +Tue Jul 11 06:25:01 1989 Brian Fox (bfox at aurel) + + * readline.c: new variable rl_tilde_expander. + If non-null, this contains the address of a function to call if + the standard meaning for expanding a tilde fails. The function is + called with the text sans tilde (as in "foo"), and returns a + malloc()'ed string which is the expansion, or a NULL pointer if + there is no expansion. + + * readline.h - new file chardefs.h + Separates things that only readline.c needs from the standard + header file publishing interesting things about readline. + + * readline.c: + readline_default_bindings () now looks at terminal chararacters + and binds those as well. + +Wed Jun 28 20:20:51 1989 Brian Fox (bfox at aurel) + + * Made readline and history into independent libraries. + diff --git a/readline/readline/INSTALL b/readline/readline/INSTALL new file mode 100644 index 0000000000..afb4d53e8e --- /dev/null +++ b/readline/readline/INSTALL @@ -0,0 +1,287 @@ +Basic Installation +================== + +These are installation instructions for Readline-8.0. + +The simplest way to compile readline is: + + 1. `cd' to the directory containing the readline source code and type + `./configure' to configure readline for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes some time. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile readline and build the static readline + and history libraries. If supported, the shared readline and history + libraries will be built also. See below for instructions on compiling + the other parts of the distribution. Typing `make everything' will + cause the static and shared libraries (if supported) and the example + programs to be built. + + 3. Type `make install' to install the static readline and history + libraries, the readline include files, the documentation, and, if + supported, the shared readline and history libraries. + + 4. You can remove the created libraries and object files from the + build directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile readline for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the readline developers, and should be used with care. + +The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It +uses those values to create a `Makefile' in the build directory, +and Makefiles in the `doc', `shlib', and `examples' +subdirectories. It also creates a `config.h' file containing +system-dependent definitions. Finally, it creates a shell script +`config.status' that you can run in the future to recreate the +current configuration, a file `config.cache' that saves the +results of its tests to speed up reconfiguring, and a file +`config.log' containing compiler output (useful mainly for +debugging `configure'). + +If you need to do unusual things to compile readline, please try +to figure out how `configure' could check whether to do them, and +mail diffs or instructions to so they can +be considered for the next release. If at some point +`config.cache' contains results you don't want to keep, you may +remove or edit it. + +The file `configure.in' is used to create `configure' by a +program called `autoconf'. You only need `configure.in' if you +want to change it or regenerate `configure' using a newer version +of `autoconf'. The readline `configure.in' requires autoconf +version 2.50 or newer. + +Compilers and Options +===================== + +Some systems require unusual options for compilation or linking that +the `configure' script does not know about. You can give `configure' +initial values for variables by setting them in the environment. Using +a Bourne-compatible shell, you can do that on the command line like +this: + + CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure + +Or on systems that have the `env' program, you can do it like this: + + env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + +Compiling For Multiple Architectures +==================================== + +You can compile readline for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + +If you have to use a `make' that does not supports the `VPATH' +variable, you have to compile readline for one architecture at a +time in the source code directory. After you have installed +readline for one architecture, use `make distclean' before +reconfiguring for another architecture. + +Installation Names +================== + +By default, `make install' will install the readline libraries in +`/usr/local/lib', the include files in +`/usr/local/include/readline', the man pages in `/usr/local/man', +and the info files in `/usr/local/info'. You can specify an +installation prefix other than `/usr/local' by giving `configure' +the option `--prefix=PATH' or by supplying a value for the +DESTDIR variable when running `make install'. + +You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. +If you give `configure' the option `--exec-prefix=PATH', the +readline Makefiles will use PATH as the prefix for installing the +libraries. Documentation and other data files will still use the +regular prefix. + +Specifying the System Type +========================== + +There may be some features `configure' can not figure out +automatically, but need to determine by the type of host readline +will run on. Usually `configure' can figure that out, but if it +prints a message saying it can not guess the host type, give it +the `--host=TYPE' option. TYPE can either be a short name for +the system type, such as `sun4', or a canonical name with three +fields: CPU-COMPANY-SYSTEM (e.g., i386-unknown-freebsd4.2). + +See the file `config.sub' for the possible values of each field. + +Sharing Defaults +================ + +If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: the readline `configure' looks for a site script, but not +all `configure' scripts do. + +Operation Controls +================== + +`configure' recognizes the following options to control how it +operates. + +`--cache-file=FILE' + Use and save the results of the tests in FILE instead of + `./config.cache'. Set FILE to `/dev/null' to disable caching, for + debugging `configure'. + +`--help' + Print a summary of the options to `configure', and exit. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--version' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`configure' also accepts some other, not widely useful, options. + +Optional Features +================= + +The readline `configure' recognizes a single `--with-PACKAGE' option: + +`--with-curses' + This tells readline that it can find the termcap library functions + (tgetent, et al.) in the curses library, rather than a separate + termcap library. Readline uses the termcap functions, but does not + link with the termcap or curses library itself, allowing applications + which link with readline the to choose an appropriate library. + This option tells readline to link the example programs with the + curses library rather than libtermcap. + +`configure' also recognizes two `--enable-FEATURE' options: + +`--enable-shared' + Build the shared libraries by default on supported platforms. The + default is `yes'. + +`--enable-static' + Build the static libraries by default. The default is `yes'. + +Shared Libraries +================ + +There is support for building shared versions of the readline and +history libraries. The configure script creates a Makefile in +the `shlib' subdirectory, and typing `make shared' will cause +shared versions of the readline and history libraries to be built +on supported platforms. + +If `configure' is given the `--enable-shared' option, it will attempt +to build the shared libraries by default on supported platforms. + +Configure calls the script support/shobj-conf to test whether or +not shared library creation is supported and to generate the values +of variables that are substituted into shlib/Makefile. If you +try to build shared libraries on an unsupported platform, `make' +will display a message asking you to update support/shobj-conf for +your platform. + +If you need to update support/shobj-conf, you will need to create +a `stanza' for your operating system and compiler. The script uses +the value of host_os and ${CC} as determined by configure. For +instance, FreeBSD 4.2 with any version of gcc is identified as +`freebsd4.2-gcc*'. + +In the stanza for your operating system-compiler pair, you will need to +define several variables. They are: + +SHOBJ_CC The C compiler used to compile source files into shareable + object files. This is normally set to the value of ${CC} + by configure, and should not need to be changed. + +SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create + position-independent code. If you are using gcc, this + should probably be set to `-fpic'. + +SHOBJ_LD The link editor to be used to create the shared library from + the object files created by $SHOBJ_CC. If you are using + gcc, a value of `gcc' will probably work. + +SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. + If you are using gcc, `-shared' may be all that is necessary. + These should be the flags needed for generic shared object + creation. + +SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library + creation. Many systems use the -R option to the link + editor to embed a path within the library for run-time + library searches. A reasonable value for such systems would + be `-R$(libdir)'. + +SHLIB_LIBS Any additional libraries that shared libraries should be + linked against when they are created. + +SHLIB_LIBPREF The prefix to use when generating the filename of the shared + library. The default is `lib'; Cygwin uses `cyg'. + +SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when + generating the filename of the shared library. Many systems + use `so'; HP-UX uses `sl'. + +SHLIB_LIBVERSION The string to append to the filename to indicate the version + of the shared library. It should begin with $(SHLIB_LIBSUFF), + and possibly include version information that allows the + run-time loader to load the version of the shared library + appropriate for a particular program. Systems using shared + libraries similar to SunOS 4.x use major and minor library + version numbers; for those systems a value of + `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. + Systems based on System V Release 4 don't use minor version + numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. + Other Unix versions use different schemes. + +SHLIB_DLLVERSION The version number for shared libraries that determines API + compatibility between readline versions and the underlying + system. Used only on Cygwin. Defaults to $SHLIB_MAJOR, but + can be overridden at configuration time by defining DLLVERSION + in the environment. + +SHLIB_DOT The character used to separate the name of the shared library + from the suffix and version information. The default is `.'; + systems like Cygwin which don't separate version information + from the library name should set this to the empty string. + +SHLIB_STATUS Set this to `supported' when you have defined the other + necessary variables. Make uses this to determine whether + or not shared library creation should be attempted. If + shared libraries are not supported, this will be set to + `unsupported'. + +You should look at the existing stanzas in support/shobj-conf for ideas. + +Once you have updated support/shobj-conf, re-run configure and type +`make shared' or `make'. The shared libraries will be created in the +shlib subdirectory. + +If shared libraries are created, `make install' will install them. +You may install only the shared libraries by running `make +install-shared' from the top-level build directory. Running `make +install' in the shlib subdirectory will also work. If you don't want +to install any created shared libraries, run `make install-static'. diff --git a/readline/readline/MANIFEST b/readline/readline/MANIFEST new file mode 100644 index 0000000000..ad49d6686b --- /dev/null +++ b/readline/readline/MANIFEST @@ -0,0 +1,165 @@ +# +# Master distribution manifest for the standalone readline distribution +# +doc d +examples d +examples/autoconf d +examples/rlfe d +support d +shlib d +COPYING f +README f +MANIFEST f +INSTALL f +CHANGELOG f +CHANGES f +NEWS f +USAGE f +aclocal.m4 f +config.h.in f +configure f +configure.ac f +Makefile.in f +readline.pc.in f +ansi_stdlib.h f +chardefs.h f +colors.h f +history.h f +histlib.h f +keymaps.h f +parse-colors.h f +posixdir.h f +posixjmp.h f +posixselect.h f +posixstat.h f +readline.h f +rlconf.h f +rldefs.h f +rlmbutil.h f +rlprivate.h f +rlshell.h f +rlstdc.h f +rltty.h f +rltypedefs.h f +rlwinsize.h f +tcap.h f +tilde.h f +xmalloc.h f +bind.c f +callback.c f +colors.c f +compat.c f +complete.c f +display.c f +emacs_keymap.c f +funmap.c f +input.c f +isearch.c f +keymaps.c f +kill.c f +macro.c f +mbutil.c f +misc.c f +nls.c f +parens.c f +parse-colors.c f +readline.c f +rltty.c f +savestring.c f +search.c f +shell.c f +signals.c f +terminal.c f +text.c f +tilde.c f +undo.c f +util.c f +vi_keymap.c f +vi_mode.c f +xfree.c f +xmalloc.c f +history.c f +histexpand.c f +histfile.c f +histsearch.c f +patchlevel f +shlib/Makefile.in f +support/config.guess f +support/config.rpath f +support/config.sub f +support/install.sh f +support/mkdirs f +support/mkdist f +support/mkinstalldirs f +support/shobj-conf f +support/shlib-install f +support/wcwidth.c f +doc/Makefile.in f +doc/texinfo.tex f +doc/version.texi f +doc/fdl.texi f +doc/rlman.texi f +doc/rltech.texi f +doc/rluser.texi f +doc/rluserman.texi f +doc/history.texi f +doc/hstech.texi f +doc/hsuser.texi f +doc/readline.3 f +doc/history.3 f +doc/texi2dvi f +doc/texi2html f +examples/Makefile.in f +examples/excallback.c f +examples/fileman.c f +examples/manexamp.c f +examples/readlinebuf.h f +examples/rl-fgets.c f +examples/rlbasic.c f +examples/rlcat.c f +examples/rlevent.c f +examples/rlkeymaps.c f +examples/rltest.c f +examples/rl-callbacktest.c f +examples/rl.c f +examples/rlptytest.c f +examples/rlversion.c f +examples/histexamp.c f +examples/hist_erasedups.c f +examples/hist_purgecmd.c f +examples/Inputrc f +examples/autoconf/BASH_CHECK_LIB_TERMCAP f +examples/autoconf/RL_LIB_READLINE_VERSION f +examples/autoconf/wi_LIB_READLINE f +examples/rlfe/ChangeLog f +examples/rlfe/Makefile.in f +examples/rlfe/README f +examples/rlfe/config.h.in f +examples/rlfe/configure f +examples/rlfe/configure.in f +examples/rlfe/extern.h f +examples/rlfe/os.h f +examples/rlfe/pty.c f +examples/rlfe/rlfe.c f +examples/rlfe/screen.h f +examples/rlwrap-0.30.tar.gz f +# formatted documentation, from MANIFEST.doc +doc/readline.ps f +doc/history.ps f +doc/rluserman.ps f +doc/readline.dvi f +doc/history.dvi f +doc/rluserman.dvi f +doc/readline.info f +doc/history.info f +doc/rluserman.info f +doc/readline.html f +doc/history.html f +doc/rluserman.html f +doc/readline.0 f +doc/history.0 f +doc/readline_3.ps f +doc/history_3.ps f +doc/history.pdf f +doc/readline.pdf f +doc/rluserman.pdf f diff --git a/readline/readline/Makefile.in b/readline/readline/Makefile.in new file mode 100644 index 0000000000..bcbd18b662 --- /dev/null +++ b/readline/readline/Makefile.in @@ -0,0 +1,616 @@ +## -*- text -*- ## +# Master Makefile for the GNU readline library. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +RL_LIBRARY_VERSION = @LIBVERSION@ +RL_LIBRARY_NAME = readline + +PACKAGE = @PACKAGE_NAME@ +VERSION = @PACKAGE_VERSION@ + +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_VERSION = @PACKAGE_VERSION@ + +PACKAGE_TARNAME = @PACKAGE_TARNAME@ + +srcdir = @srcdir@ +VPATH = @srcdir@ +top_srcdir = @top_srcdir@ +BUILD_DIR = @BUILD_DIR@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +CC = @CC@ +RANLIB = @RANLIB@ +AR = @AR@ +ARFLAGS = @ARFLAGS@ +RM = rm -f +CP = cp +MV = mv + +@SET_MAKE@ +SHELL = @MAKE_SHELL@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +datarootdir = @datarootdir@ + +bindir = @bindir@ +libdir = @libdir@ +mandir = @mandir@ +includedir = @includedir@ +datadir = @datadir@ +localedir = @localedir@ +pkgconfigdir = ${libdir}/pkgconfig + +infodir = @infodir@ + +docdir = @docdir@ + +man3dir = $(mandir)/man3 + +# Support an alternate destination root directory for package building +DESTDIR = + +# Programs to make tags files. +ETAGS = etags +CTAGS = ctags -tw + +CFLAGS = @CFLAGS@ +LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' +CPPFLAGS = @CPPFLAGS@ + +DEFS = @DEFS@ @CROSS_COMPILE@ +LOCAL_DEFS = @LOCAL_DEFS@ + +TERMCAP_LIB = @TERMCAP_LIB@ + +# For libraries which include headers from other libraries. +INCLUDES = -I. -I$(srcdir) + +XCCFLAGS = $(ASAN_CFLAGS) $(DEFS) $(LOCAL_DEFS) $(INCLUDES) $(CPPFLAGS) +CCFLAGS = $(XCCFLAGS) $(LOCAL_CFLAGS) $(CFLAGS) + +# could add -Werror here +GCC_LINT_FLAGS = -ansi -Wall -Wshadow -Wpointer-arith -Wcast-qual \ + -Wwrite-strings -Wstrict-prototypes \ + -Wmissing-prototypes -Wno-implicit -pedantic +GCC_LINT_CFLAGS = $(XCCFLAGS) $(GCC_LINT_FLAGS) @CFLAGS@ @LOCAL_CFLAGS@ + +ASAN_XCFLAGS = -fsanitize=address -fno-omit-frame-pointer +ASAN_XLDFLAGS = -fsanitize=address + +install_examples = @EXAMPLES_INSTALL_TARGET@ + +.c.o: + ${RM} $@ + $(CC) -c $(CCFLAGS) $< + +# The name of the main library target. +LIBRARY_NAME = libreadline.a +STATIC_LIBS = libreadline.a libhistory.a + +# The C code source files for this library. +CSOURCES = $(srcdir)/readline.c $(srcdir)/funmap.c $(srcdir)/keymaps.c \ + $(srcdir)/vi_mode.c $(srcdir)/parens.c $(srcdir)/rltty.c \ + $(srcdir)/complete.c $(srcdir)/bind.c $(srcdir)/isearch.c \ + $(srcdir)/display.c $(srcdir)/signals.c $(srcdir)/emacs_keymap.c \ + $(srcdir)/vi_keymap.c $(srcdir)/util.c $(srcdir)/kill.c \ + $(srcdir)/undo.c $(srcdir)/macro.c $(srcdir)/input.c \ + $(srcdir)/callback.c $(srcdir)/terminal.c $(srcdir)/xmalloc.c $(srcdir)/xfree.c \ + $(srcdir)/history.c $(srcdir)/histsearch.c $(srcdir)/histexpand.c \ + $(srcdir)/histfile.c $(srcdir)/nls.c $(srcdir)/search.c \ + $(srcdir)/shell.c $(srcdir)/savestring.c $(srcdir)/tilde.c \ + $(srcdir)/text.c $(srcdir)/misc.c $(srcdir)/compat.c \ + $(srcdir)/mbutil.c + +# The header files for this library. +HSOURCES = $(srcdir)/readline.h $(srcdir)/rldefs.h $(srcdir)/chardefs.h \ + $(srcdir)/keymaps.h $(srcdir)/history.h $(srcdir)/histlib.h \ + $(srcdir)/posixstat.h $(srcdir)/posixdir.h $(srcdir)/posixjmp.h \ + $(srcdir)/tilde.h $(srcdir)/rlconf.h $(srcdir)/rltty.h \ + $(srcdir)/ansi_stdlib.h $(srcdir)/tcap.h $(srcdir)/rlstdc.h \ + $(srcdir)/xmalloc.h $(srcdir)/rlprivate.h $(srcdir)/rlshell.h \ + $(srcdir)/rltypedefs.h $(srcdir)/rlmbutil.h \ + $(srcdir)/colors.h $(srcdir)/parse-colors.h + +HISTOBJ = history.o histexpand.o histfile.o histsearch.o shell.o mbutil.o +TILDEOBJ = tilde.o +COLORSOBJ = colors.o parse-colors.o +OBJECTS = readline.o vi_mode.o funmap.o keymaps.o parens.o search.o \ + rltty.o complete.o bind.o isearch.o display.o signals.o \ + util.o kill.o undo.o macro.o input.o callback.o terminal.o \ + text.o nls.o misc.o $(HISTOBJ) $(TILDEOBJ) $(COLORSOBJ) \ + xmalloc.o xfree.o compat.o + +# The texinfo files which document this library. +DOCSOURCE = doc/rlman.texinfo doc/rltech.texinfo doc/rluser.texinfo +DOCOBJECT = doc/readline.dvi +DOCSUPPORT = doc/Makefile +DOCUMENTATION = $(DOCSOURCE) $(DOCOBJECT) $(DOCSUPPORT) + +CREATED_MAKEFILES = Makefile doc/Makefile examples/Makefile shlib/Makefile +CREATED_CONFIGURE = config.status config.h config.cache config.log \ + stamp-config stamp-h readline.pc +CREATED_TAGS = TAGS tags + +INSTALLED_HEADERS = readline.h chardefs.h keymaps.h history.h tilde.h \ + rlstdc.h rlconf.h rltypedefs.h + +OTHER_DOCS = $(srcdir)/CHANGES $(srcdir)/INSTALL $(srcdir)/README +OTHER_INSTALLED_DOCS = CHANGES INSTALL README + +########################################################################## +TARGETS = @STATIC_TARGET@ @SHARED_TARGET@ +INSTALL_TARGETS = @STATIC_INSTALL_TARGET@ @SHARED_INSTALL_TARGET@ + +all: $(TARGETS) + +everything: all examples + +asan: + ${MAKE} ${MFLAGS} ASAN_CFLAGS='${ASAN_XCFLAGS}' ASAN_LDFLAGS='${ASAN_XLDFLAGS}' everything + +static: $(STATIC_LIBS) + +libreadline.a: $(OBJECTS) + $(RM) $@ + $(AR) $(ARFLAGS) $@ $(OBJECTS) + -test -n "$(RANLIB)" && $(RANLIB) $@ + +libhistory.a: $(HISTOBJ) xmalloc.o xfree.o + $(RM) $@ + $(AR) $(ARFLAGS) $@ $(HISTOBJ) xmalloc.o xfree.o + -test -n "$(RANLIB)" && $(RANLIB) $@ + +# Since tilde.c is shared between readline and bash, make sure we compile +# it with the right flags when it's built as part of readline +tilde.o: tilde.c + rm -f $@ + $(CC) $(CCFLAGS) -DREADLINE_LIBRARY -c $(srcdir)/tilde.c + +readline: $(OBJECTS) readline.h rldefs.h chardefs.h ./libreadline.a + $(CC) $(CCFLAGS) -DREADLINE_LIBRARY -o $@ $(top_srcdir)/examples/rl.c ./libreadline.a ${TERMCAP_LIB} + +lint: force + $(MAKE) $(MFLAGS) CCFLAGS='$(GCC_LINT_CFLAGS)' static + +Makefile makefile: config.status $(srcdir)/Makefile.in + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +Makefiles makefiles: config.status $(srcdir)/Makefile.in + @for mf in $(CREATED_MAKEFILES); do \ + CONFIG_FILES=$$mf CONFIG_HEADERS= $(SHELL) ./config.status ; \ + done + +config.status: configure + $(SHELL) ./config.status --recheck + +config.h: stamp-h + +stamp-h: config.status $(srcdir)/config.h.in + CONFIG_FILES= CONFIG_HEADERS=config.h ./config.status + echo > $@ + +#$(srcdir)/configure: $(srcdir)/configure.ac ## Comment-me-out in distribution +# cd $(srcdir) && autoconf ## Comment-me-out in distribution + + +shared: force + -test -d shlib || mkdir shlib + ( cd shlib ; ${MAKE} ${MFLAGS} all ) + +documentation: force + -test -d doc || mkdir doc + -( cd doc && $(MAKE) $(MFLAGS) ) + +examples: force + -test -d examples || mkdir examples + -(cd examples && ${MAKE} ${MFLAGS} all ) + +force: + +## GDB LOCAL +## Don't mess with people's installed readline's. +## This tries to install this version of readline over whatever +## version is already installed on the system (which could be a +## newer version). There is no real reason for us to install +## readline along with GDB. GDB links statically against readline, +## so it doesn't depend on us installing it on the system. + +install: + +#install: $(INSTALL_TARGETS) + +install-headers: installdirs ${INSTALLED_HEADERS} + for f in ${INSTALLED_HEADERS}; do \ + $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(includedir)/readline ; \ + done + +uninstall-headers: + -test -n "$(includedir)" && cd $(DESTDIR)$(includedir)/readline && \ + ${RM} ${INSTALLED_HEADERS} + +maybe-uninstall-headers: uninstall-headers + +install-pc: installdirs + -$(INSTALL_DATA) $(BUILD_DIR)/readline.pc $(DESTDIR)$(pkgconfigdir)/readline.pc + +uninstall-pc: + -test -n "$(pkgconfigdir)" && cd $(DESTDIR)$(pkgconfigdir) && \ + ${RM} readline.pc + +maybe-uninstall-pc: uninstall-pc + +install-static: installdirs $(STATIC_LIBS) install-headers install-doc ${install_examples} install-pc + -$(MV) $(DESTDIR)$(libdir)/libreadline.a $(DESTDIR)$(libdir)/libreadline.old + $(INSTALL_DATA) libreadline.a $(DESTDIR)$(libdir)/libreadline.a + -test -n "$(RANLIB)" && $(RANLIB) $(DESTDIR)$(libdir)/libreadline.a + -$(MV) $(DESTDIR)$(libdir)/libhistory.a $(DESTDIR)$(libdir)/libhistory.old + $(INSTALL_DATA) libhistory.a $(DESTDIR)$(libdir)/libhistory.a + -test -n "$(RANLIB)" && $(RANLIB) $(DESTDIR)$(libdir)/libhistory.a + +installdirs: $(srcdir)/support/mkinstalldirs + -$(SHELL) $(srcdir)/support/mkinstalldirs $(DESTDIR)$(includedir) \ + $(DESTDIR)$(includedir)/readline $(DESTDIR)$(libdir) \ + $(DESTDIR)$(infodir) $(DESTDIR)$(man3dir) $(DESTDIR)$(docdir) \ + $(DESTDIR)$(pkgconfigdir) + +uninstall: uninstall-headers uninstall-doc uninstall-examples uninstall-pc + -test -n "$(DESTDIR)$(libdir)" && cd $(DESTDIR)$(libdir) && \ + ${RM} libreadline.a libreadline.old libhistory.a libhistory.old $(SHARED_LIBS) + -( cd shlib; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) + +install-shared: installdirs install-headers shared install-doc install-pc + ( cd shlib ; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} install ) + +uninstall-shared: maybe-uninstall-headers maybe-uninstall-pc + -( cd shlib; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) + +install-examples: installdirs install-headers + -( cd examples ; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} install ) + +uninstall-examples: maybe-uninstall-headers + -( cd examples; ${MAKE} ${MFLAGS} DESTDIR=${DESTDIR} uninstall ) + +install-doc: installdirs + $(INSTALL_DATA) $(OTHER_DOCS) $(DESTDIR)$(docdir) + -( if test -d doc ; then \ + cd doc && \ + ${MAKE} ${MFLAGS} infodir=$(infodir) DESTDIR=${DESTDIR} install; \ + fi ) + +uninstall-doc: + -( cd $(DESTDIR)$(docdir) && ${RM} ${OTHER_INSTALLED_DOCS} ) + -( if test -d doc ; then \ + cd doc && \ + ${MAKE} ${MFLAGS} infodir=$(infodir) DESTDIR=${DESTDIR} uninstall; \ + fi ) + +TAGS: force + -( cd $(srcdir) && $(ETAGS) $(CSOURCES) $(HSOURCES) ) + +tags: force + -( cd $(srcdir) && $(CTAGS) $(CSOURCES) $(HSOURCES) ) + +clean: force + $(RM) $(OBJECTS) $(STATIC_LIBS) + $(RM) readline readline.exe + ( cd shlib && $(MAKE) $(MFLAGS) $@ ) + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + +mostlyclean: clean + ( cd shlib && $(MAKE) $(MFLAGS) $@ ) + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + +distclean maintainer-clean: clean + ( cd shlib && $(MAKE) $(MFLAGS) $@ ) + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + -( cd examples && $(MAKE) $(MFLAGS) $@ ) + $(RM) Makefile + $(RM) $(CREATED_CONFIGURE) + $(RM) $(CREATED_TAGS) + +readline.pc: config.status $(srcdir)/readline.pc.in + $(SHELL) config.status + +info dvi html pdf ps: + -( cd doc && $(MAKE) $(MFLAGS) $@ ) + +install-info: +install-dvi: +install-html: +install-pdf: +install-ps: +check: +installcheck: + +dist: force + @echo Readline distributions are created using $(srcdir)/support/mkdist. + @echo Here is a sample of the necessary commands: + @echo bash $(srcdir)/support/mkdist -m $(srcdir)/MANIFEST -s $(srcdir) -r $(RL_LIBRARY_NAME) $(RL_LIBRARY_VERSION) + @echo tar cf $(RL_LIBRARY_NAME)-${RL_LIBRARY_VERSION}.tar ${RL_LIBRARY_NAME}-$(RL_LIBRARY_VERSION) + @echo gzip $(RL_LIBRARY_NAME)-$(RL_LIBRARY_VERSION).tar + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +# Dependencies +bind.o: ansi_stdlib.h posixstat.h +bind.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +bind.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +bind.o: history.h +callback.o: rlconf.h +callback.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +callback.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +compat.o: ${BUILD_DIR}/config.h +compat.o: rlstdc.h rltypedefs.h +complete.o: ansi_stdlib.h posixdir.h posixstat.h +complete.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +complete.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +display.o: ansi_stdlib.h posixstat.h +display.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +display.o: tcap.h +display.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +display.o: history.h rlstdc.h +funmap.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +funmap.o: rlconf.h ansi_stdlib.h rlstdc.h +funmap.o: ${BUILD_DIR}/config.h +histexpand.o: ansi_stdlib.h +histexpand.o: history.h histlib.h rlstdc.h rltypedefs.h +histexpand.o: ${BUILD_DIR}/config.h +histfile.o: ansi_stdlib.h +histfile.o: history.h histlib.h rlstdc.h rltypedefs.h +histfile.o: ${BUILD_DIR}/config.h +history.o: ansi_stdlib.h +history.o: history.h histlib.h rlstdc.h rltypedefs.h +history.o: ${BUILD_DIR}/config.h +histsearch.o: ansi_stdlib.h +histsearch.o: history.h histlib.h rlstdc.h rltypedefs.h +histsearch.o: ${BUILD_DIR}/config.h +input.o: ansi_stdlib.h +input.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +input.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +isearch.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +isearch.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +isearch.o: ansi_stdlib.h history.h rlstdc.h +keymaps.o: emacs_keymap.c vi_keymap.c +keymaps.o: keymaps.h rltypedefs.h chardefs.h rlconf.h ansi_stdlib.h +keymaps.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +keymaps.o: ${BUILD_DIR}/config.h rlstdc.h +kill.o: ansi_stdlib.h +kill.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +kill.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +kill.o: history.h rlstdc.h +macro.o: ansi_stdlib.h +macro.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +macro.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +macro.o: history.h rlstdc.h +mbutil.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +mbutil.o: readline.h keymaps.h rltypedefs.h chardefs.h rlstdc.h +misc.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +misc.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +misc.o: history.h rlstdc.h ansi_stdlib.h +nls.o: ansi_stdlib.h +nls.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +nls.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +nls.o: history.h rlstdc.h +parens.o: rlconf.h +parens.o: ${BUILD_DIR}/config.h +parens.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +readline.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +readline.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +readline.o: history.h rlstdc.h +readline.o: posixstat.h ansi_stdlib.h posixjmp.h +rltty.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +rltty.o: rltty.h +rltty.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +savestring.o: ${BUILD_DIR}/config.h +search.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +search.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +search.o: ansi_stdlib.h history.h rlstdc.h +shell.o: ${BUILD_DIR}/config.h +shell.o: ansi_stdlib.h +signals.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +signals.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +signals.o: history.h rlstdc.h +terminal.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +terminal.o: tcap.h +terminal.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +terminal.o: history.h rlstdc.h +text.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +text.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +text.o: history.h rlstdc.h ansi_stdlib.h +tilde.o: ansi_stdlib.h +tilde.o: ${BUILD_DIR}/config.h +tilde.o: tilde.h +undo.o: ansi_stdlib.h +undo.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +undo.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +undo.o: history.h rlstdc.h +util.o: posixjmp.h ansi_stdlib.h +util.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +util.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +vi_mode.o: rldefs.h ${BUILD_DIR}/config.h rlconf.h +vi_mode.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h +vi_mode.o: history.h ansi_stdlib.h rlstdc.h +xfree.o: ${BUILD_DIR}/config.h +xfree.o: ansi_stdlib.h +xmalloc.o: ${BUILD_DIR}/config.h +xmalloc.o: ansi_stdlib.h + +colors.o: ${BUILD_DIR}/config.h colors.h +colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h +colors.o: rlconf.h +colors.o: ansi_stdlib.h posixstat.h +parse-colors.o: ${BUILD_DIR}/config.h colors.h parse-colors.h +parse-colors.o: rldefs.h rlconf.h +parse-colors.o: readline.h keymaps.h rltypedefs.h chardefs.h tilde.h rlstdc.h + +bind.o: rlshell.h +histfile.o: rlshell.h +nls.o: rlshell.h +readline.o: rlshell.h +shell.o: rlshell.h +terminal.o: rlshell.h +histexpand.o: rlshell.h + +bind.o: rlprivate.h +callback.o: rlprivate.h +complete.o: rlprivate.h +display.o: rlprivate.h +input.o: rlprivate.h +isearch.o: rlprivate.h +kill.o: rlprivate.h +macro.o: rlprivate.h +mbutil.o: rlprivate.h +misc.o: rlprivate.h +nls.o: rlprivate.h +parens.o: rlprivate.h +readline.o: rlprivate.h +rltty.o: rlprivate.h +search.o: rlprivate.h +signals.o: rlprivate.h +terminal.o: rlprivate.h +text.o: rlprivate.h +undo.o: rlprivate.h +util.o: rlprivate.h +vi_mode.o: rlprivate.h +colors.o: rlprivate.h +parse-colors.o: rlprivate.h + +bind.o: xmalloc.h +callback.o: xmalloc.h +complete.o: xmalloc.h +display.o: xmalloc.h +funmap.o: xmalloc.h +histexpand.o: xmalloc.h +histfile.o: xmalloc.h +history.o: xmalloc.h +input.o: xmalloc.h +isearch.o: xmalloc.h +keymaps.o: xmalloc.h +kill.o: xmalloc.h +macro.o: xmalloc.h +mbutil.o: xmalloc.h +misc.o: xmalloc.h +readline.o: xmalloc.h +savestring.o: xmalloc.h +search.o: xmalloc.h +shell.o: xmalloc.h +terminal.o: xmalloc.h +text.o: xmalloc.h +tilde.o: xmalloc.h +undo.o: xmalloc.h +util.o: xmalloc.h +vi_mode.o: xmalloc.h +xfree.o: xmalloc.h +xmalloc.o: xmalloc.h +colors.o: xmalloc.h +parse-colors.o: xmalloc.h + +complete.o: rlmbutil.h +display.o: rlmbutil.h +histexpand.o: rlmbutil.h +input.o: rlmbutil.h +isearch.o: rlmbutil.h +mbutil.o: rlmbutil.h +misc.o: rlmbutil.h +readline.o: rlmbutil.h +search.o: rlmbutil.h +text.o: rlmbutil.h +vi_mode.o: rlmbutil.h + +bind.o: $(srcdir)/bind.c +callback.o: $(srcdir)/callback.c +compat.o: $(srcdir)/compat.c +complete.o: $(srcdir)/complete.c +display.o: $(srcdir)/display.c +funmap.o: $(srcdir)/funmap.c +input.o: $(srcdir)/input.c +isearch.o: $(srcdir)/isearch.c +keymaps.o: $(srcdir)/keymaps.c $(srcdir)/emacs_keymap.c $(srcdir)/vi_keymap.c +kill.o: $(srcdir)/kill.c +macro.o: $(srcdir)/macro.c +mbutil.o: $(srcdir)/mbutil.c +misc.o: $(srcdir)/misc.c +nls.o: $(srcdir)/nls.c +parens.o: $(srcdir)/parens.c +readline.o: $(srcdir)/readline.c +rltty.o: $(srcdir)/rltty.c +savestring.o: $(srcdir)/savestring.c +search.o: $(srcdir)/search.c +shell.o: $(srcdir)/shell.c +signals.o: $(srcdir)/signals.c +terminal.o: $(srcdir)/terminal.c +text.o: $(srcdir)/text.c +tilde.o: $(srcdir)/tilde.c +undo.o: $(srcdir)/undo.c +util.o: $(srcdir)/util.c +vi_mode.o: $(srcdir)/vi_mode.c +xfree.o: $(srcdir)/xfree.c +xmalloc.o: $(srcdir)/xmalloc.c + +colors.o: $(srcdir)/parse-colors.c +parse-colors.o: $(srcdir)/parse-colors.c + +histexpand.o: $(srcdir)/histexpand.c +histfile.o: $(srcdir)/histfile.c +history.o: $(srcdir)/history.c +histsearch.o: $(srcdir)/histsearch.c + +bind.o: bind.c +callback.o: callback.c +compat.o: compat.c +complete.o: complete.c +display.o: display.c +funmap.o: funmap.c +input.o: input.c +isearch.o: isearch.c +keymaps.o: keymaps.c emacs_keymap.c vi_keymap.c +kill.o: kill.c +macro.o: macro.c +mbutil.o: mbutil.c +misc.o: misc.c +nls.o: nls.c +parens.o: parens.c +readline.o: readline.c +rltty.o: rltty.c +savestring.o: savestring.c +search.o: search.c +shell.o: shell.c +signals.o: signals.c +terminal.o: terminal.c +text.o: text.c +tilde.o: tilde.c +undo.o: undo.c +util.o: util.c +vi_mode.o: vi_mode.c +xfree.o: xfree.c +xmalloc.o: xmalloc.c + +histexpand.o: histexpand.c +histfile.o: histfile.c +history.o: history.c +histsearch.o: histsearch.c diff --git a/readline/readline/NEWS b/readline/readline/NEWS new file mode 100644 index 0000000000..42be21eb02 --- /dev/null +++ b/readline/readline/NEWS @@ -0,0 +1,366 @@ +This is a terse description of the new features added to readline-8.0 since +the release of readline-7.0. + +New Features in Readline + +a. Non-incremental vi-mode search (`N', `n') can search for a shell pattern, as + Posix specifies (uses fnmatch(3) if available). + +b. There are new `next-screen-line' and `previous-screen-line' bindable + commands, which move the cursor to the same column in the next, or previous, + physical line, respectively. + +c. There are default key bindings for control-arrow-key key combinations. + +d. A negative argument (-N) to `quoted-insert' means to insert the next N + characters using quoted-insert. + +e. New public function: rl_check_signals(), which allows applications to + respond to signals that readline catches while waiting for input using + a custom read function. + +f. There is new support for conditionally testing the readline version in an + inputrc file, with a full set of arithmetic comparison operators available. + +g. There is a simple variable comparison facility available for use within an + inputrc file. Allowable operators are equality and inequality; string + variables may be compared to a value; boolean variables must be compared to + either `on' or `off'; variable names are separated from the operator by + whitespace. + +h. The history expansion library now understands command and process + substitution and extended globbing and allows them to appear anywhere in a + word. + +i. The history library has a new variable that allows applications to set the + initial quoting state, so quoting state can be inherited from a previous + line. + +j. Readline now allows application-defined keymap names; there is a new public + function, rl_set_keymap_name(), to do that. + +k. The "Insert" keypad key, if available, now puts readline into overwrite + mode. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-7.0 since +the release of readline-6.3. + +New Features in Readline + +a. The history truncation code now uses the same error recovery mechansim as + the history writing code, and restores the old version of the history file + on error. The error recovery mechanism handles symlinked history files. + +b. There is a new bindable variable, `enable-bracketed-paste', which enables + support for a terminal's bracketed paste mode. + +c. The editing mode indicators can now be strings and are user-settable + (new `emacs-mode-string', `vi-cmd-mode-string' and `vi-ins-mode-string' + variables). Mode strings can contain invisible character sequences. + Setting mode strings to null strings restores the defaults. + +d. Prompt expansion adds the mode string to the last line of a multi-line + prompt (one with embedded newlines). + +e. There is a new bindable variable, `colored-completion-prefix', which, if + set, causes the common prefix of a set of possible completions to be + displayed in color. + +f. There is a new bindable command `vi-yank-pop', a vi-mode version of emacs- + mode yank-pop. + +g. The redisplay code underwent several efficiency improvements for multibyte + locales. + +h. The insert-char function attempts to batch-insert all pending typeahead + that maps to self-insert, as long as it is coming from the terminal. + +i. rl_callback_sigcleanup: a new application function that can clean up and + unset any state set by readline's callback mode. Intended to be used + after a signal. + +j. If an incremental search string has its last character removed with DEL, the + resulting empty search string no longer matches the previous line. + +k. If readline reads a history file that begins with `#' (or the value of + the history comment character) and has enabled history timestamps, the history + entries are assumed to be delimited by timestamps. This allows multi-line + history entries. + +l. Readline now throws an error if it parses a key binding without a terminating + `:' or whitespace. + +m. The default binding for ^W in vi mode now uses word boundaries specified + by Posix (vi-unix-word-rubout is bindable command name). + +n. rl_clear_visible_line: new application-callable function; clears all + screen lines occupied by the current visible readline line. + +o. rl_tty_set_echoing: application-callable function that controls whether + or not readline thinks it is echoing terminal output. + +p. Handle >| and strings of digits preceding and following redirection + specifications as single tokens when tokenizing the line for history + expansion. + +q. Fixed a bug with displaying completions when the prefix display length + is greater than the length of the completions to be displayed. + +r. The :p history modifier now applies to the entire line, so any expansion + specifying :p causes the line to be printed instead of expanded. + +s. New application-callable function: rl_pending_signal(): returns the signal + number of any signal readline has caught but not yet handled. + +t. New application-settable variable: rl_persistent_signal_handlers: if set + to a non-zero value, readline will enable the readline-6.2 signal handler + behavior in callback mode: handlers are installed when + rl_callback_handler_install is called and removed removed when a complete + line has been read. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-6.3 since +the release of readline-6.2. + +New Features in Readline + +a. Readline is now more responsive to SIGHUP and other fatal signals when + reading input from the terminal or performing word completion but no + longer attempts to run any not-allowable functions from a signal handler + context. + +b. There are new bindable commands to search the history for the string of + characters between the beginning of the line and the point + (history-substring-search-forward, history-substring-search-backward) + +c. Readline allows quoted strings as the values of variables when setting + them with `set'. As a side effect, trailing spaces and tabs are ignored + when setting a string variable's value. + +d. The history library creates a backup of the history file when writing it + and restores the backup on a write error. + +e. New application-settable variable: rl_filename_stat_hook: a function called + with a filename before using it in a call to stat(2). Bash uses it to + expand shell variables so things like $HOME/Downloads have a slash + appended. + +f. New bindable function `print-last-kbd-macro', prints the most-recently- + defined keyboard macro in a reusable format. + +g. New user-settable variable `colored-stats', enables use of colored text + to denote file types when displaying possible completions (colored analog + of visible-stats). + +h. New user-settable variable `keyseq-timout', acts as an inter-character + timeout when reading input or incremental search strings. + +i. New application-callable function: rl_clear_history. Clears the history list + and frees all readline-associated private data. + +j. New user-settable variable, show-mode-in-prompt, adds a characters to the + beginning of the prompt indicating the current editing mode. + +k. New application-settable variable: rl_input_available_hook; function to be + called when readline detects there is data available on its input file + descriptor. + +l. Readline calls an application-set event hook (rl_event_hook) after it gets + a signal while reading input (read returns -1/EINTR but readline does not + handle the signal immediately) to allow the application to handle or + otherwise note it. + +m. If the user-settable variable `history-size' is set to a value less than + 0, the history list size is unlimited. + +n. New application-settable variable: rl_signal_event_hook; function that is + called when readline is reading terminal input and read(2) is interrupted + by a signal. Currently not called for SIGHUP or SIGTERM. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-6.1 since +the release of readline-6.0. + +New Features in Readline + +a. New bindable function: menu-complete-backward. + +b. In the vi insertion keymap, C-n is now bound to menu-complete by default, + and C-p to menu-complete-backward. + +c. When in vi command mode, repeatedly hitting ESC now does nothing, even + when ESC introduces a bound key sequence. This is closer to how + historical vi behaves. + +d. New bindable function: skip-csi-sequence. Can be used as a default to + consume key sequences generated by keys like Home and End without having + to bind all keys. + +e. New application-settable function: rl_filename_rewrite_hook. Can be used + to rewite or modify filenames read from the file system before they are + compared to the word to be completed. + +f. New bindable variable: skip-completed-text, active when completing in the + middle of a word. If enabled, it means that characters in the completion + that match characters in the remainder of the word are "skipped" rather + than inserted into the line. + +g. The pre-readline-6.0 version of menu completion is available as + "old-menu-complete" for users who do not like the readline-6.0 version. + +h. New bindable variable: echo-control-characters. If enabled, and the + tty ECHOCTL bit is set, controls the echoing of characters corresponding + to keyboard-generated signals. + +i. New bindable variable: enable-meta-key. Controls whether or not readline + sends the smm/rmm sequences if the terminal indicates it has a meta key + that enables eight-bit characters. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-6.0 since +the release of readline-5.2. + +New Features in Readline + +a. A new variable, rl_sort_completion_matches; allows applications to inhibit + match list sorting (but beware: some things don't work right if + applications do this). + +b. A new variable, rl_completion_invoking_key; allows applications to discover + the key that invoked rl_complete or rl_menu_complete. + +c. The functions rl_block_sigint and rl_release_sigint are now public and + available to calling applications who want to protect critical sections + (like redisplay). + +d. The functions rl_save_state and rl_restore_state are now public and + available to calling applications; documented rest of readline's state + flag values. + +e. A new user-settable variable, `history-size', allows setting the maximum + number of entries in the history list. + +f. There is a new implementation of menu completion, with several improvements + over the old; the most notable improvement is a better `completions + browsing' mode. + +g. The menu completion code now uses the rl_menu_completion_entry_function + variable, allowing applications to provide their own menu completion + generators. + +h. There is support for replacing a prefix of a pathname with a `...' when + displaying possible completions. This is controllable by setting the + `completion-prefix-display-length' variable. Matches with a common prefix + longer than this value have the common prefix replaced with `...'. + +i. There is a new `revert-all-at-newline' variable. If enabled, readline will + undo all outstanding changes to all history lines when `accept-line' is + executed. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-5.2 since +the release of readline-5.1. + +New Features in Readline + +a. Calling applications can now set the keyboard timeout to 0, allowing + poll-like behavior. + +b. The value of SYS_INPUTRC (configurable at compilation time) is now used as + the default last-ditch startup file. + +c. The history file reading functions now allow windows-like \r\n line + terminators. + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-5.1 since +the release of readline-5.0. + +New Features in Readline + +a. The key sequence sent by the keypad `delete' key is now automatically + bound to delete-char. + +b. A negative argument to menu-complete now cycles backward through the + completion list. + +c. A new bindable readline variable: bind-tty-special-chars. If non-zero, + readline will bind the terminal special characters to their readline + equivalents when it's called (on by default). + +d. New bindable command: vi-rubout. Saves deleted text for possible + reinsertion, as with any vi-mode `text modification' command; `X' is bound + to this in vi command mode. + +e. If the rl_completion_query_items is set to a value < 0, readline never + asks the user whether or not to view the possible completions. + +f. New application-callable auxiliary function, rl_variable_value, returns + a string corresponding to a readline variable's value. + +g. When parsing inputrc files and variable binding commands, the parser + strips trailing whitespace from values assigned to boolean variables + before checking them. + +h. A new external application-controllable variable that allows the LINES + and COLUMNS environment variables to set the window size regardless of + what the kernel returns. + + +------------------------------------------------------------------------------- +This is a terse description of the new features added to readline-5.0 since +the release of readline-4.3. + +New Features in Readline + +a. History expansion has a new `a' modifier equivalent to the `g' modifier + for compatibility with the BSD csh. + +b. History expansion has a new `G' modifier equivalent to the BSD csh `g' + modifier, which performs a substitution once per word. + +c. All non-incremental search operations may now undo the operation of + replacing the current line with the history line. + +d. The text inserted by an `a' command in vi mode can be reinserted with + `.'. + +e. New bindable variable, `show-all-if-unmodified'. If set, the readline + completer will list possible completions immediately if there is more + than one completion and partial completion cannot be performed. + +f. There is a new application-callable `free_history_entry()' function. + +g. History list entries now contain timestamp information; the history file + functions know how to read and write timestamp information associated + with each entry. + +h. Four new key binding functions have been added: + + rl_bind_key_if_unbound() + rl_bind_key_if_unbound_in_map() + rl_bind_keyseq_if_unbound() + rl_bind_keyseq_if_unbound_in_map() + +i. New application variable, rl_completion_quote_character, set to any + quote character readline finds before it calls the application completion + function. + +j. New application variable, rl_completion_suppress_quote, settable by an + application completion function. If set to non-zero, readline does not + attempt to append a closing quote to a completed word. + +k. New application variable, rl_completion_found_quote, set to a non-zero + value if readline determines that the word to be completed is quoted. + Set before readline calls any application completion function. + +l. New function hook, rl_completion_word_break_hook, called when readline + needs to break a line into words when completion is attempted. Allows + the word break characters to vary based on position in the line. + +m. New bindable command: unix-filename-rubout. Does the same thing as + unix-word-rubout, but adds `/' to the set of word delimiters. + +n. When listing completions, directories have a `/' appended if the + `mark-directories' option has been enabled. diff --git a/readline/readline/README b/readline/readline/README new file mode 100644 index 0000000000..4fb0804fca --- /dev/null +++ b/readline/readline/README @@ -0,0 +1,196 @@ +Introduction +============ + +This is the Gnu Readline library, version 8.0. + +The Readline library provides a set of functions for use by applications +that allow users to edit command lines as they are typed in. Both +Emacs and vi editing modes are available. The Readline library includes +additional functions to maintain a list of previously-entered command +lines, to recall and perhaps reedit those lines, and perform csh-like +history expansion on previous commands. + +The history facilites are also placed into a separate library, the +History library, as part of the build process. The History library +may be used without Readline in applications which desire its +capabilities. + +The Readline library is free software, distributed under the terms of +the [GNU] General Public License as published by the Free Software +Foundation, version 3 of the License. For more information, see the +file COPYING. + +To build the library, try typing `./configure', then `make'. The +configuration process is automated, so no further intervention should +be necessary. Readline builds with `gcc' by default if it is +available. If you want to use `cc' instead, type + + CC=cc ./configure + +if you are using a Bourne-style shell. If you are not, the following +may work: + + env CC=cc ./configure + +Read the file INSTALL in this directory for more information about how +to customize and control the build process. + +The file rlconf.h contains C preprocessor defines that enable and disable +certain Readline features. + +The special make target `everything' will build the static and shared +libraries (if the target platform supports them) and the examples. + +Examples +======== + +There are several example programs that use Readline features in the +examples directory. The `rl' program is of particular interest. It +is a command-line interface to Readline, suitable for use in shell +scripts in place of `read'. + +Shared Libraries +================ + +There is skeletal support for building shared versions of the +Readline and History libraries. The configure script creates +a Makefile in the `shlib' subdirectory, and typing `make shared' +will cause shared versions of the Readline and History libraries +to be built on supported platforms. + +If `configure' is given the `--enable-shared' option, it will attempt +to build the shared libraries by default on supported platforms. + +Configure calls the script support/shobj-conf to test whether or +not shared library creation is supported and to generate the values +of variables that are substituted into shlib/Makefile. If you +try to build shared libraries on an unsupported platform, `make' +will display a message asking you to update support/shobj-conf for +your platform. + +If you need to update support/shobj-conf, you will need to create +a `stanza' for your operating system and compiler. The script uses +the value of host_os and ${CC} as determined by configure. For +instance, FreeBSD 4.2 with any version of gcc is identified as +`freebsd4.2-gcc*'. + +In the stanza for your operating system-compiler pair, you will need to +define several variables. They are: + +SHOBJ_CC The C compiler used to compile source files into shareable + object files. This is normally set to the value of ${CC} + by configure, and should not need to be changed. + +SHOBJ_CFLAGS Flags to pass to the C compiler ($SHOBJ_CC) to create + position-independent code. If you are using gcc, this + should probably be set to `-fpic'. + +SHOBJ_LD The link editor to be used to create the shared library from + the object files created by $SHOBJ_CC. If you are using + gcc, a value of `gcc' will probably work. + +SHOBJ_LDFLAGS Flags to pass to SHOBJ_LD to enable shared object creation. + If you are using gcc, `-shared' may be all that is necessary. + These should be the flags needed for generic shared object + creation. + +SHLIB_XLDFLAGS Additional flags to pass to SHOBJ_LD for shared library + creation. Many systems use the -R option to the link + editor to embed a path within the library for run-time + library searches. A reasonable value for such systems would + be `-R$(libdir)'. + +SHLIB_LIBS Any additional libraries that shared libraries should be + linked against when they are created. + +SHLIB_LIBPREF The prefix to use when generating the filename of the shared + library. The default is `lib'; Cygwin uses `cyg'. + +SHLIB_LIBSUFF The suffix to add to `libreadline' and `libhistory' when + generating the filename of the shared library. Many systems + use `so'; HP-UX uses `sl'. + +SHLIB_LIBVERSION The string to append to the filename to indicate the version + of the shared library. It should begin with $(SHLIB_LIBSUFF), + and possibly include version information that allows the + run-time loader to load the version of the shared library + appropriate for a particular program. Systems using shared + libraries similar to SunOS 4.x use major and minor library + version numbers; for those systems a value of + `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' is appropriate. + Systems based on System V Release 4 don't use minor version + numbers; use `$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' on those systems. + Other Unix versions use different schemes. + +SHLIB_DLLVERSION The version number for shared libraries that determines API + compatibility between readline versions and the underlying + system. Used only on Cygwin. Defaults to $SHLIB_MAJOR, but + can be overridden at configuration time by defining DLLVERSION + in the environment. + +SHLIB_DOT The character used to separate the name of the shared library + from the suffix and version information. The default is `.'; + systems like Cygwin which don't separate version information + from the library name should set this to the empty string. + +SHLIB_STATUS Set this to `supported' when you have defined the other + necessary variables. Make uses this to determine whether + or not shared library creation should be attempted. + +You should look at the existing stanzas in support/shobj-conf for ideas. + +Once you have updated support/shobj-conf, re-run configure and type +`make shared'. The shared libraries will be created in the shlib +subdirectory. + +If shared libraries are created, `make install' will install them. +You may install only the shared libraries by running `make +install-shared' from the top-level build directory. Running `make +install' in the shlib subdirectory will also work. If you don't want +to install any created shared libraries, run `make install-static'. + +Documentation +============= + +The documentation for the Readline and History libraries appears in +the `doc' subdirectory. There are three texinfo files and a +Unix-style manual page describing the facilities available in the +Readline library. The texinfo files include both user and +programmer's manuals. HTML versions of the manuals appear in the +`doc' subdirectory as well. + +Usage +===== + +Our position on the use of Readline through a shared-library linking +mechanism is that there is no legal difference between shared-library +linking and static linking--either kind of linking combines various +modules into a single larger work. The conditions for using Readline +in a larger work are stated in section 3 of the GNU GPL. + +Reporting Bugs +============== + +Bug reports for Readline should be sent to: + + bug-readline@gnu.org + +When reporting a bug, please include the following information: + + * the version number and release status of Readline (e.g., 4.2-release) + * the machine and OS that it is running on + * a list of the compilation flags or the contents of `config.h', if + appropriate + * a description of the bug + * a recipe for recreating the bug reliably + * a fix for the bug if you have one! + +If you would like to contact the Readline maintainer directly, send mail +to bash-maintainers@gnu.org. + +Since Readline is developed along with bash, the bug-bash@gnu.org mailing +list (mirrored to the Usenet newsgroup gnu.bash.bug) often contains +Readline bug reports and fixes. + +Chet Ramey +chet.ramey@case.edu diff --git a/readline/readline/USAGE b/readline/readline/USAGE new file mode 100644 index 0000000000..edc9f5417d --- /dev/null +++ b/readline/readline/USAGE @@ -0,0 +1,37 @@ +From rms@gnu.org Thu Jul 22 20:37:55 1999 +Flags: 10 +Return-Path: rms@gnu.org +Received: from arthur.INS.CWRU.Edu (root@arthur.INS.CWRU.Edu [129.22.8.215]) by odin.INS.CWRU.Edu with ESMTP (8.8.6+cwru/CWRU-2.4-ins) + id UAA25349; Thu, 22 Jul 1999 20:37:54 -0400 (EDT) (from rms@gnu.org for ) +Received: from nike.ins.cwru.edu (root@nike.INS.CWRU.Edu [129.22.8.219]) by arthur.INS.CWRU.Edu with ESMTP (8.8.8+cwru/CWRU-3.6) + id UAA05311; Thu, 22 Jul 1999 20:37:51 -0400 (EDT) (from rms@gnu.org for ) +Received: from pele.santafe.edu (pele.santafe.edu [192.12.12.119]) by nike.ins.cwru.edu with ESMTP (8.8.7/CWRU-2.5-bsdi) + id UAA13350; Thu, 22 Jul 1999 20:37:50 -0400 (EDT) (from rms@gnu.org for ) +Received: from wijiji.santafe.edu (wijiji [192.12.12.5]) + by pele.santafe.edu (8.9.1/8.9.1) with ESMTP id SAA10831 + for ; Thu, 22 Jul 1999 18:37:47 -0600 (MDT) +Received: (from rms@localhost) + by wijiji.santafe.edu (8.9.1b+Sun/8.9.1) id SAA01089; + Thu, 22 Jul 1999 18:37:46 -0600 (MDT) +Date: Thu, 22 Jul 1999 18:37:46 -0600 (MDT) +Message-Id: <199907230037.SAA01089@wijiji.santafe.edu> +X-Authentication-Warning: wijiji.santafe.edu: rms set sender to rms@gnu.org using -f +From: Richard Stallman +To: chet@nike.ins.cwru.edu +Subject: Use of Readline +Reply-to: rms@gnu.org + +I think Allbery's suggestion is a good one. So please add this text +in a suitable place. Please don't put it in the GPL itself; that +should be the same as the GPL everywhere else. Putting it in the +README and/or the documentation would be a good idea. + + +====================================================================== +Our position on the use of Readline through a shared-library linking +mechanism is that there is no legal difference between shared-library +linking and static linking--either kind of linking combines various +modules into a single larger work. The conditions for using Readline +in a larger work are stated in section 3 of the GNU GPL. + + diff --git a/readline/readline/aclocal.m4 b/readline/readline/aclocal.m4 new file mode 100644 index 0000000000..1413267fc1 --- /dev/null +++ b/readline/readline/aclocal.m4 @@ -0,0 +1,4262 @@ +nl +dnl Bash specific tests +dnl +dnl Some derived from PDKSH 5.1.3 autoconf tests +dnl + +AC_DEFUN(BASH_C_LONG_LONG, +[AC_CACHE_CHECK(for long long, ac_cv_c_long_long, +[if test "$GCC" = yes; then + ac_cv_c_long_long=yes +else +AC_TRY_RUN([ +int +main() +{ +long long foo = 0; +exit(sizeof(long long) < sizeof(long)); +} +], ac_cv_c_long_long=yes, ac_cv_c_long_long=no) +fi]) +if test $ac_cv_c_long_long = yes; then + AC_DEFINE(HAVE_LONG_LONG, 1, [Define if the `long long' type works.]) +fi +]) + +dnl +dnl This is very similar to AC_C_LONG_DOUBLE, with the fix for IRIX +dnl (< changed to <=) added. +dnl +AC_DEFUN(BASH_C_LONG_DOUBLE, +[AC_CACHE_CHECK(for long double, ac_cv_c_long_double, +[if test "$GCC" = yes; then + ac_cv_c_long_double=yes +else +AC_TRY_RUN([ +int +main() +{ + /* The Stardent Vistra knows sizeof(long double), but does not + support it. */ + long double foo = 0.0; + /* On Ultrix 4.3 cc, long double is 4 and double is 8. */ + /* On IRIX 5.3, the compiler converts long double to double with a warning, + but compiles this successfully. */ + exit(sizeof(long double) <= sizeof(double)); +} +], ac_cv_c_long_double=yes, ac_cv_c_long_double=no) +fi]) +if test $ac_cv_c_long_double = yes; then + AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if the `long double' type works.]) +fi +]) + +dnl +dnl Check for . This is separated out so that it can be +dnl AC_REQUIREd. +dnl +dnl BASH_HEADER_INTTYPES +AC_DEFUN(BASH_HEADER_INTTYPES, +[ + AC_CHECK_HEADERS(inttypes.h) +]) + +dnl +dnl check for typedef'd symbols in header files, but allow the caller to +dnl specify the include files to be checked in addition to the default +dnl +dnl BASH_CHECK_TYPE(TYPE, HEADERS, DEFAULT[, VALUE-IF-FOUND]) +AC_DEFUN(BASH_CHECK_TYPE, +[ +AC_REQUIRE([AC_HEADER_STDC])dnl +AC_REQUIRE([BASH_HEADER_INTTYPES]) +AC_MSG_CHECKING(for $1) +AC_CACHE_VAL(bash_cv_type_$1, +[AC_EGREP_CPP($1, [#include +#if STDC_HEADERS +#include +#include +#endif +#if HAVE_INTTYPES_H +#include +#endif +#if HAVE_STDINT_H +#include +#endif +$2 +], bash_cv_type_$1=yes, bash_cv_type_$1=no)]) +AC_MSG_RESULT($bash_cv_type_$1) +ifelse($#, 4, [if test $bash_cv_type_$1 = yes; then + AC_DEFINE($4) + fi]) +if test $bash_cv_type_$1 = no; then + AC_DEFINE_UNQUOTED($1, $3) +fi +]) + +dnl +dnl BASH_CHECK_DECL(FUNC) +dnl +dnl Check for a declaration of FUNC in stdlib.h and inttypes.h like +dnl AC_CHECK_DECL +dnl +AC_DEFUN(BASH_CHECK_DECL, +[ +AC_REQUIRE([AC_HEADER_STDC]) +AC_REQUIRE([BASH_HEADER_INTTYPES]) +AC_CACHE_CHECK([for declaration of $1], bash_cv_decl_$1, +[AC_TRY_LINK( +[ +#if STDC_HEADERS +# include +#endif +#if HAVE_INTTYPES_H +# include +#endif +], +[return !$1;], +bash_cv_decl_$1=yes, bash_cv_decl_$1=no)]) +bash_tr_func=HAVE_DECL_`echo $1 | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` +if test $bash_cv_decl_$1 = yes; then + AC_DEFINE_UNQUOTED($bash_tr_func, 1) +else + AC_DEFINE_UNQUOTED($bash_tr_func, 0) +fi +]) + +AC_DEFUN(BASH_DECL_PRINTF, +[AC_MSG_CHECKING(for declaration of printf in ) +AC_CACHE_VAL(bash_cv_printf_declared, +[AC_TRY_RUN([ +#include +#ifdef __STDC__ +typedef int (*_bashfunc)(const char *, ...); +#else +typedef int (*_bashfunc)(); +#endif +main() +{ +_bashfunc pf; +pf = (_bashfunc) printf; +exit(pf == 0); +} +], bash_cv_printf_declared=yes, bash_cv_printf_declared=no, + [AC_MSG_WARN(cannot check printf declaration if cross compiling -- defaulting to yes) + bash_cv_printf_declared=yes] +)]) +AC_MSG_RESULT($bash_cv_printf_declared) +if test $bash_cv_printf_declared = yes; then +AC_DEFINE(PRINTF_DECLARED) +fi +]) + +AC_DEFUN(BASH_DECL_SBRK, +[AC_MSG_CHECKING(for declaration of sbrk in ) +AC_CACHE_VAL(bash_cv_sbrk_declared, +[AC_EGREP_HEADER(sbrk, unistd.h, + bash_cv_sbrk_declared=yes, bash_cv_sbrk_declared=no)]) +AC_MSG_RESULT($bash_cv_sbrk_declared) +if test $bash_cv_sbrk_declared = yes; then +AC_DEFINE(SBRK_DECLARED) +fi +]) + +dnl +dnl Check for sys_siglist[] or _sys_siglist[] +dnl +AC_DEFUN(BASH_DECL_UNDER_SYS_SIGLIST, +[AC_MSG_CHECKING([for _sys_siglist in signal.h or unistd.h]) +AC_CACHE_VAL(bash_cv_decl_under_sys_siglist, +[AC_TRY_COMPILE([ +#include +#include +#ifdef HAVE_UNISTD_H +#include +#endif], [ char *msg = _sys_siglist[2]; ], + bash_cv_decl_under_sys_siglist=yes, bash_cv_decl_under_sys_siglist=no, + [AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no)])])dnl +AC_MSG_RESULT($bash_cv_decl_under_sys_siglist) +if test $bash_cv_decl_under_sys_siglist = yes; then +AC_DEFINE(UNDER_SYS_SIGLIST_DECLARED) +fi +]) + +AC_DEFUN(BASH_UNDER_SYS_SIGLIST, +[AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST]) +AC_MSG_CHECKING([for _sys_siglist in system C library]) +AC_CACHE_VAL(bash_cv_under_sys_siglist, +[AC_TRY_RUN([ +#include +#include +#ifdef HAVE_UNISTD_H +#include +#endif +#ifndef UNDER_SYS_SIGLIST_DECLARED +extern char *_sys_siglist[]; +#endif +main() +{ +char *msg = (char *)_sys_siglist[2]; +exit(msg == 0); +}], + bash_cv_under_sys_siglist=yes, bash_cv_under_sys_siglist=no, + [AC_MSG_WARN(cannot check for _sys_siglist[] if cross compiling -- defaulting to no) + bash_cv_under_sys_siglist=no])]) +AC_MSG_RESULT($bash_cv_under_sys_siglist) +if test $bash_cv_under_sys_siglist = yes; then +AC_DEFINE(HAVE_UNDER_SYS_SIGLIST) +fi +]) + +AC_DEFUN(BASH_SYS_SIGLIST, +[AC_REQUIRE([AC_DECL_SYS_SIGLIST]) +AC_MSG_CHECKING([for sys_siglist in system C library]) +AC_CACHE_VAL(bash_cv_sys_siglist, +[AC_TRY_RUN([ +#include +#include +#ifdef HAVE_UNISTD_H +#include +#endif +#if !HAVE_DECL_SYS_SIGLIST +extern char *sys_siglist[]; +#endif +main() +{ +char *msg = sys_siglist[2]; +exit(msg == 0); +}], + bash_cv_sys_siglist=yes, bash_cv_sys_siglist=no, + [AC_MSG_WARN(cannot check for sys_siglist if cross compiling -- defaulting to no) + bash_cv_sys_siglist=no])]) +AC_MSG_RESULT($bash_cv_sys_siglist) +if test $bash_cv_sys_siglist = yes; then +AC_DEFINE(HAVE_SYS_SIGLIST) +fi +]) + +dnl Check for the various permutations of sys_siglist and make sure we +dnl compile in siglist.o if they're not defined +AC_DEFUN(BASH_CHECK_SYS_SIGLIST, [ +AC_REQUIRE([BASH_SYS_SIGLIST]) +AC_REQUIRE([BASH_DECL_UNDER_SYS_SIGLIST]) +AC_REQUIRE([BASH_FUNC_STRSIGNAL]) +if test "$bash_cv_sys_siglist" = no && test "$bash_cv_under_sys_siglist" = no && test "$bash_cv_have_strsignal" = no; then + SIGLIST_O=siglist.o +else + SIGLIST_O= +fi +AC_SUBST([SIGLIST_O]) +]) + +dnl Check for sys_errlist[] and sys_nerr, check for declaration +AC_DEFUN(BASH_SYS_ERRLIST, +[AC_MSG_CHECKING([for sys_errlist and sys_nerr]) +AC_CACHE_VAL(bash_cv_sys_errlist, +[AC_TRY_LINK([#include ], +[extern char *sys_errlist[]; + extern int sys_nerr; + char *msg = sys_errlist[sys_nerr - 1];], + bash_cv_sys_errlist=yes, bash_cv_sys_errlist=no)])dnl +AC_MSG_RESULT($bash_cv_sys_errlist) +if test $bash_cv_sys_errlist = yes; then +AC_DEFINE(HAVE_SYS_ERRLIST) +fi +]) + +dnl +dnl Check if dup2() does not clear the close on exec flag +dnl +AC_DEFUN(BASH_FUNC_DUP2_CLOEXEC_CHECK, +[AC_MSG_CHECKING(if dup2 fails to clear the close-on-exec flag) +AC_CACHE_VAL(bash_cv_dup2_broken, +[AC_TRY_RUN([ +#include +#include +main() +{ + int fd1, fd2, fl; + fd1 = open("/dev/null", 2); + if (fcntl(fd1, 2, 1) < 0) + exit(1); + fd2 = dup2(fd1, 1); + if (fd2 < 0) + exit(2); + fl = fcntl(fd2, 1, 0); + /* fl will be 1 if dup2 did not reset the close-on-exec flag. */ + exit(fl != 1); +} +], bash_cv_dup2_broken=yes, bash_cv_dup2_broken=no, + [AC_MSG_WARN(cannot check dup2 if cross compiling -- defaulting to no) + bash_cv_dup2_broken=no]) +]) +AC_MSG_RESULT($bash_cv_dup2_broken) +if test $bash_cv_dup2_broken = yes; then +AC_DEFINE(DUP2_BROKEN) +fi +]) + +AC_DEFUN(BASH_FUNC_STRSIGNAL, +[AC_MSG_CHECKING([for the existence of strsignal]) +AC_CACHE_VAL(bash_cv_have_strsignal, +[AC_TRY_LINK([#include +#include ], +[char *s = (char *)strsignal(2);], + bash_cv_have_strsignal=yes, bash_cv_have_strsignal=no)]) +AC_MSG_RESULT($bash_cv_have_strsignal) +if test $bash_cv_have_strsignal = yes; then +AC_DEFINE(HAVE_STRSIGNAL) +fi +]) + +dnl Check to see if opendir will open non-directories (not a nice thing) +AC_DEFUN(BASH_FUNC_OPENDIR_CHECK, +[AC_REQUIRE([AC_HEADER_DIRENT])dnl +AC_MSG_CHECKING(if opendir() opens non-directories) +AC_CACHE_VAL(bash_cv_opendir_not_robust, +[AC_TRY_RUN([ +#include +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ +main() +{ +DIR *dir; +int fd, err; +err = mkdir("bash-aclocal", 0700); +if (err < 0) { + perror("mkdir"); + exit(1); +} +unlink("bash-aclocal/not_a_directory"); +fd = open("bash-aclocal/not_a_directory", O_WRONLY|O_CREAT|O_EXCL, 0666); +write(fd, "\n", 1); +close(fd); +dir = opendir("bash-aclocal/not_a_directory"); +unlink("bash-aclocal/not_a_directory"); +rmdir("bash-aclocal"); +exit (dir == 0); +}], bash_cv_opendir_not_robust=yes,bash_cv_opendir_not_robust=no, + [AC_MSG_WARN(cannot check opendir if cross compiling -- defaulting to no) + bash_cv_opendir_not_robust=no] +)]) +AC_MSG_RESULT($bash_cv_opendir_not_robust) +if test $bash_cv_opendir_not_robust = yes; then +AC_DEFINE(OPENDIR_NOT_ROBUST) +fi +]) + +dnl +AC_DEFUN(BASH_TYPE_SIGHANDLER, +[AC_MSG_CHECKING([whether signal handlers are of type void]) +AC_CACHE_VAL(bash_cv_void_sighandler, +[AC_TRY_COMPILE([#include +#include +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" +#endif +void (*signal ()) ();], +[int i;], bash_cv_void_sighandler=yes, bash_cv_void_sighandler=no)])dnl +AC_MSG_RESULT($bash_cv_void_sighandler) +if test $bash_cv_void_sighandler = yes; then +AC_DEFINE(VOID_SIGHANDLER) +fi +]) + +dnl +dnl A signed 16-bit integer quantity +dnl +AC_DEFUN(BASH_TYPE_BITS16_T, +[ +if test "$ac_cv_sizeof_short" = 2; then + AC_CHECK_TYPE(bits16_t, short) +elif test "$ac_cv_sizeof_char" = 2; then + AC_CHECK_TYPE(bits16_t, char) +else + AC_CHECK_TYPE(bits16_t, short) +fi +]) + +dnl +dnl An unsigned 16-bit integer quantity +dnl +AC_DEFUN(BASH_TYPE_U_BITS16_T, +[ +if test "$ac_cv_sizeof_short" = 2; then + AC_CHECK_TYPE(u_bits16_t, unsigned short) +elif test "$ac_cv_sizeof_char" = 2; then + AC_CHECK_TYPE(u_bits16_t, unsigned char) +else + AC_CHECK_TYPE(u_bits16_t, unsigned short) +fi +]) + +dnl +dnl A signed 32-bit integer quantity +dnl +AC_DEFUN(BASH_TYPE_BITS32_T, +[ +if test "$ac_cv_sizeof_int" = 4; then + AC_CHECK_TYPE(bits32_t, int) +elif test "$ac_cv_sizeof_long" = 4; then + AC_CHECK_TYPE(bits32_t, long) +else + AC_CHECK_TYPE(bits32_t, int) +fi +]) + +dnl +dnl An unsigned 32-bit integer quantity +dnl +AC_DEFUN(BASH_TYPE_U_BITS32_T, +[ +if test "$ac_cv_sizeof_int" = 4; then + AC_CHECK_TYPE(u_bits32_t, unsigned int) +elif test "$ac_cv_sizeof_long" = 4; then + AC_CHECK_TYPE(u_bits32_t, unsigned long) +else + AC_CHECK_TYPE(u_bits32_t, unsigned int) +fi +]) + +AC_DEFUN(BASH_TYPE_PTRDIFF_T, +[ +if test "$ac_cv_sizeof_int" = "$ac_cv_sizeof_char_p"; then + AC_CHECK_TYPE(ptrdiff_t, int) +elif test "$ac_cv_sizeof_long" = "$ac_cv_sizeof_char_p"; then + AC_CHECK_TYPE(ptrdiff_t, long) +elif test "$ac_cv_type_long_long" = yes && test "$ac_cv_sizeof_long_long" = "$ac_cv_sizeof_char_p"; then + AC_CHECK_TYPE(ptrdiff_t, [long long]) +else + AC_CHECK_TYPE(ptrdiff_t, int) +fi +]) + +dnl +dnl A signed 64-bit quantity +dnl +AC_DEFUN(BASH_TYPE_BITS64_T, +[ +if test "$ac_cv_sizeof_char_p" = 8; then + AC_CHECK_TYPE(bits64_t, char *) +elif test "$ac_cv_sizeof_double" = 8; then + AC_CHECK_TYPE(bits64_t, double) +elif test -n "$ac_cv_type_long_long" && test "$ac_cv_sizeof_long_long" = 8; then + AC_CHECK_TYPE(bits64_t, [long long]) +elif test "$ac_cv_sizeof_long" = 8; then + AC_CHECK_TYPE(bits64_t, long) +else + AC_CHECK_TYPE(bits64_t, double) +fi +]) + +AC_DEFUN(BASH_TYPE_LONG_LONG, +[ +AC_CACHE_CHECK([for long long], bash_cv_type_long_long, +[AC_TRY_LINK([ +long long ll = 1; int i = 63;], +[ +long long llm = (long long) -1; +return ll << i | ll >> i | llm / ll | llm % ll; +], bash_cv_type_long_long='long long', bash_cv_type_long_long='long')]) +if test "$bash_cv_type_long_long" = 'long long'; then + AC_DEFINE(HAVE_LONG_LONG, 1) +fi +]) + +AC_DEFUN(BASH_TYPE_UNSIGNED_LONG_LONG, +[ +AC_CACHE_CHECK([for unsigned long long], bash_cv_type_unsigned_long_long, +[AC_TRY_LINK([ +unsigned long long ull = 1; int i = 63;], +[ +unsigned long long ullmax = (unsigned long long) -1; +return ull << i | ull >> i | ullmax / ull | ullmax % ull; +], bash_cv_type_unsigned_long_long='unsigned long long', + bash_cv_type_unsigned_long_long='unsigned long')]) +if test "$bash_cv_type_unsigned_long_long" = 'unsigned long long'; then + AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1) +fi +]) + +dnl +dnl Type of struct rlimit fields: some systems (OSF/1, NetBSD, RISC/os 5.0) +dnl have a rlim_t, others (4.4BSD based systems) use quad_t, others use +dnl long and still others use int (HP-UX 9.01, SunOS 4.1.3). To simplify +dnl matters, this just checks for rlim_t, quad_t, or long. +dnl +AC_DEFUN(BASH_TYPE_RLIMIT, +[AC_MSG_CHECKING(for size and type of struct rlimit fields) +AC_CACHE_VAL(bash_cv_type_rlimit, +[AC_TRY_COMPILE([#include +#include ], +[rlim_t xxx;], bash_cv_type_rlimit=rlim_t,[ +AC_TRY_RUN([ +#include +#include +#include +main() +{ +#ifdef HAVE_QUAD_T + struct rlimit rl; + if (sizeof(rl.rlim_cur) == sizeof(quad_t)) + exit(0); +#endif + exit(1); +}], bash_cv_type_rlimit=quad_t, bash_cv_type_rlimit=long, + [AC_MSG_WARN(cannot check quad_t if cross compiling -- defaulting to long) + bash_cv_type_rlimit=long])]) +]) +AC_MSG_RESULT($bash_cv_type_rlimit) +if test $bash_cv_type_rlimit = quad_t; then +AC_DEFINE(RLIMTYPE, quad_t) +elif test $bash_cv_type_rlimit = rlim_t; then +AC_DEFINE(RLIMTYPE, rlim_t) +fi +]) + +AC_DEFUN(BASH_TYPE_SIG_ATOMIC_T, +[AC_CACHE_CHECK([for sig_atomic_t in signal.h], ac_cv_have_sig_atomic_t, +[AC_TRY_LINK([ +#include +],[ sig_atomic_t x; ], +ac_cv_have_sig_atomic_t=yes, ac_cv_have_sig_atomic_t=no)]) +if test "$ac_cv_have_sig_atomic_t" = "no" +then + AC_CHECK_TYPE(sig_atomic_t,int) +fi +]) + +AC_DEFUN(BASH_FUNC_LSTAT, +[dnl Cannot use AC_CHECK_FUNCS(lstat) because Linux defines lstat() as an +dnl inline function in . +AC_CACHE_CHECK([for lstat], bash_cv_func_lstat, +[AC_TRY_LINK([ +#include +#include +],[ lstat(".",(struct stat *)0); ], +bash_cv_func_lstat=yes, bash_cv_func_lstat=no)]) +if test $bash_cv_func_lstat = yes; then + AC_DEFINE(HAVE_LSTAT) +fi +]) + +AC_DEFUN(BASH_FUNC_INET_ATON, +[ +AC_CACHE_CHECK([for inet_aton], bash_cv_func_inet_aton, +[AC_TRY_LINK([ +#include +#include +#include +struct in_addr ap;], [ inet_aton("127.0.0.1", &ap); ], +bash_cv_func_inet_aton=yes, bash_cv_func_inet_aton=no)]) +if test $bash_cv_func_inet_aton = yes; then + AC_DEFINE(HAVE_INET_ATON) +else + AC_LIBOBJ(inet_aton) +fi +]) + +AC_DEFUN(BASH_FUNC_GETENV, +[AC_MSG_CHECKING(to see if getenv can be redefined) +AC_CACHE_VAL(bash_cv_getenv_redef, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +# include +#endif +#ifndef __STDC__ +# ifndef const +# define const +# endif +#endif +char * +getenv (name) +#if defined (__linux__) || defined (__bsdi__) || defined (convex) + const char *name; +#else + char const *name; +#endif /* !__linux__ && !__bsdi__ && !convex */ +{ +return "42"; +} +main() +{ +char *s; +/* The next allows this program to run, but does not allow bash to link + when it redefines getenv. I'm not really interested in figuring out + why not. */ +#if defined (NeXT) +exit(1); +#endif +s = getenv("ABCDE"); +exit(s == 0); /* force optimizer to leave getenv in */ +} +], bash_cv_getenv_redef=yes, bash_cv_getenv_redef=no, + [AC_MSG_WARN(cannot check getenv redefinition if cross compiling -- defaulting to yes) + bash_cv_getenv_redef=yes] +)]) +AC_MSG_RESULT($bash_cv_getenv_redef) +if test $bash_cv_getenv_redef = yes; then +AC_DEFINE(CAN_REDEFINE_GETENV) +fi +]) + +# We should check for putenv before calling this +AC_DEFUN(BASH_FUNC_STD_PUTENV, +[ +AC_REQUIRE([AC_HEADER_STDC]) +AC_REQUIRE([AC_C_PROTOTYPES]) +AC_CACHE_CHECK([for standard-conformant putenv declaration], bash_cv_std_putenv, +[AC_TRY_LINK([ +#if STDC_HEADERS +#include +#include +#endif +#ifndef __STDC__ +# ifndef const +# define const +# endif +#endif +#ifdef PROTOTYPES +extern int putenv (char *); +#else +extern int putenv (); +#endif +], +[return (putenv == 0);], +bash_cv_std_putenv=yes, bash_cv_std_putenv=no +)]) +if test $bash_cv_std_putenv = yes; then +AC_DEFINE(HAVE_STD_PUTENV) +fi +]) + +# We should check for unsetenv before calling this +AC_DEFUN(BASH_FUNC_STD_UNSETENV, +[ +AC_REQUIRE([AC_HEADER_STDC]) +AC_REQUIRE([AC_C_PROTOTYPES]) +AC_CACHE_CHECK([for standard-conformant unsetenv declaration], bash_cv_std_unsetenv, +[AC_TRY_LINK([ +#if STDC_HEADERS +#include +#include +#endif +#ifndef __STDC__ +# ifndef const +# define const +# endif +#endif +#ifdef PROTOTYPES +extern int unsetenv (const char *); +#else +extern int unsetenv (); +#endif +], +[return (unsetenv == 0);], +bash_cv_std_unsetenv=yes, bash_cv_std_unsetenv=no +)]) +if test $bash_cv_std_unsetenv = yes; then +AC_DEFINE(HAVE_STD_UNSETENV) +fi +]) + +AC_DEFUN(BASH_FUNC_ULIMIT_MAXFDS, +[AC_MSG_CHECKING(whether ulimit can substitute for getdtablesize) +AC_CACHE_VAL(bash_cv_ulimit_maxfds, +[AC_TRY_RUN([ +main() +{ +long maxfds = ulimit(4, 0L); +exit (maxfds == -1L); +} +], bash_cv_ulimit_maxfds=yes, bash_cv_ulimit_maxfds=no, + [AC_MSG_WARN(cannot check ulimit if cross compiling -- defaulting to no) + bash_cv_ulimit_maxfds=no] +)]) +AC_MSG_RESULT($bash_cv_ulimit_maxfds) +if test $bash_cv_ulimit_maxfds = yes; then +AC_DEFINE(ULIMIT_MAXFDS) +fi +]) + +AC_DEFUN(BASH_FUNC_GETCWD, +[AC_MSG_CHECKING([if getcwd() will dynamically allocate memory with 0 size]) +AC_CACHE_VAL(bash_cv_getcwd_malloc, +[AC_TRY_RUN([ +#include +#ifdef HAVE_UNISTD_H +#include +#endif + +main() +{ + char *xpwd; + xpwd = getcwd(0, 0); + exit (xpwd == 0); +} +], bash_cv_getcwd_malloc=yes, bash_cv_getcwd_malloc=no, + [AC_MSG_WARN(cannot check whether getcwd allocates memory when cross-compiling -- defaulting to no) + bash_cv_getcwd_malloc=no] +)]) +AC_MSG_RESULT($bash_cv_getcwd_malloc) +if test $bash_cv_getcwd_malloc = no; then +AC_DEFINE(GETCWD_BROKEN) +AC_LIBOBJ(getcwd) +fi +]) + +dnl +dnl This needs BASH_CHECK_SOCKLIB, but since that's not called on every +dnl system, we can't use AC_PREREQ +dnl +AC_DEFUN(BASH_FUNC_GETHOSTBYNAME, +[if test "X$bash_cv_have_gethostbyname" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(for gethostbyname in socket library) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_have_gethostbyname, +[AC_TRY_LINK([#include ], +[ struct hostent *hp; + hp = gethostbyname("localhost"); +], bash_cv_have_gethostbyname=yes, bash_cv_have_gethostbyname=no)] +) +if test "X$_bash_needmsg" = Xyes; then + AC_MSG_CHECKING(for gethostbyname in socket library) +fi +AC_MSG_RESULT($bash_cv_have_gethostbyname) +if test "$bash_cv_have_gethostbyname" = yes; then +AC_DEFINE(HAVE_GETHOSTBYNAME) +fi +]) + +AC_DEFUN(BASH_FUNC_FNMATCH_EXTMATCH, +[AC_MSG_CHECKING(if fnmatch does extended pattern matching with FNM_EXTMATCH) +AC_CACHE_VAL(bash_cv_fnm_extmatch, +[AC_TRY_RUN([ +#include + +main() +{ +#ifdef FNM_EXTMATCH + exit (0); +#else + exit (1); +#endif +} +], bash_cv_fnm_extmatch=yes, bash_cv_fnm_extmatch=no, + [AC_MSG_WARN(cannot check FNM_EXTMATCH if cross compiling -- defaulting to no) + bash_cv_fnm_extmatch=no]) +]) +AC_MSG_RESULT($bash_cv_fnm_extmatch) +if test $bash_cv_fnm_extmatch = yes; then +AC_DEFINE(HAVE_LIBC_FNM_EXTMATCH) +fi +]) + +AC_DEFUN(BASH_FUNC_POSIX_SETJMP, +[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) +AC_MSG_CHECKING(for presence of POSIX-style sigsetjmp/siglongjmp) +AC_CACHE_VAL(bash_cv_func_sigsetjmp, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +#include +#endif +#include +#include +#include + +main() +{ +#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) +exit (1); +#else + +int code; +sigset_t set, oset; +sigjmp_buf xx; + +/* get the mask */ +sigemptyset(&set); +sigemptyset(&oset); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); + +/* save it */ +code = sigsetjmp(xx, 1); +if (code) + exit(0); /* could get sigmask and compare to oset here. */ + +/* change it */ +sigaddset(&set, SIGINT); +sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); + +/* and siglongjmp */ +siglongjmp(xx, 10); +exit(1); +#endif +}], bash_cv_func_sigsetjmp=present, bash_cv_func_sigsetjmp=missing, + [AC_MSG_WARN(cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing) + bash_cv_func_sigsetjmp=missing] +)]) +AC_MSG_RESULT($bash_cv_func_sigsetjmp) +if test $bash_cv_func_sigsetjmp = present; then +AC_DEFINE(HAVE_POSIX_SIGSETJMP) +fi +]) + +AC_DEFUN(BASH_FUNC_STRCOLL, +[ +AC_MSG_CHECKING(whether or not strcoll and strcmp differ) +AC_CACHE_VAL(bash_cv_func_strcoll_broken, +[AC_TRY_RUN([ +#include +#if defined (HAVE_LOCALE_H) +#include +#endif + +main(c, v) +int c; +char *v[]; +{ + int r1, r2; + char *deflocale, *defcoll; + +#ifdef HAVE_SETLOCALE + deflocale = setlocale(LC_ALL, ""); + defcoll = setlocale(LC_COLLATE, ""); +#endif + +#ifdef HAVE_STRCOLL + /* These two values are taken from tests/glob-test. */ + r1 = strcoll("abd", "aXd"); +#else + r1 = 0; +#endif + r2 = strcmp("abd", "aXd"); + + /* These two should both be greater than 0. It is permissible for + a system to return different values, as long as the sign is the + same. */ + + /* Exit with 1 (failure) if these two values are both > 0, since + this tests whether strcoll(3) is broken with respect to strcmp(3) + in the default locale. */ + exit (r1 > 0 && r2 > 0); +} +], bash_cv_func_strcoll_broken=yes, bash_cv_func_strcoll_broken=no, + [AC_MSG_WARN(cannot check strcoll if cross compiling -- defaulting to no) + bash_cv_func_strcoll_broken=no] +)]) +AC_MSG_RESULT($bash_cv_func_strcoll_broken) +if test $bash_cv_func_strcoll_broken = yes; then +AC_DEFINE(STRCOLL_BROKEN) +fi +]) + +AC_DEFUN(BASH_FUNC_PRINTF_A_FORMAT, +[AC_MSG_CHECKING([for printf floating point output in hex notation]) +AC_CACHE_VAL(bash_cv_printf_a_format, +[AC_TRY_RUN([ +#include +#include + +int +main() +{ + double y = 0.0; + char abuf[1024]; + + sprintf(abuf, "%A", y); + exit(strchr(abuf, 'P') == (char *)0); +} +], bash_cv_printf_a_format=yes, bash_cv_printf_a_format=no, + [AC_MSG_WARN(cannot check printf if cross compiling -- defaulting to no) + bash_cv_printf_a_format=no] +)]) +AC_MSG_RESULT($bash_cv_printf_a_format) +if test $bash_cv_printf_a_format = yes; then +AC_DEFINE(HAVE_PRINTF_A_FORMAT) +fi +]) + +AC_DEFUN(BASH_STRUCT_TERMIOS_LDISC, +[ +AC_CHECK_MEMBER(struct termios.c_line, AC_DEFINE(TERMIOS_LDISC), ,[ +#include +#include +]) +]) + +AC_DEFUN(BASH_STRUCT_TERMIO_LDISC, +[ +AC_CHECK_MEMBER(struct termio.c_line, AC_DEFINE(TERMIO_LDISC), ,[ +#include +#include +]) +]) + +dnl +dnl Like AC_STRUCT_ST_BLOCKS, but doesn't muck with LIBOBJS +dnl +dnl sets bash_cv_struct_stat_st_blocks +dnl +dnl unused for now; we'll see how AC_CHECK_MEMBERS works +dnl +AC_DEFUN(BASH_STRUCT_ST_BLOCKS, +[ +AC_MSG_CHECKING([for struct stat.st_blocks]) +AC_CACHE_VAL(bash_cv_struct_stat_st_blocks, +[AC_TRY_COMPILE( +[ +#include +#include +], +[ +main() +{ +static struct stat a; +if (a.st_blocks) return 0; +return 0; +} +], bash_cv_struct_stat_st_blocks=yes, bash_cv_struct_stat_st_blocks=no) +]) +AC_MSG_RESULT($bash_cv_struct_stat_st_blocks) +if test "$bash_cv_struct_stat_st_blocks" = "yes"; then +AC_DEFINE(HAVE_STRUCT_STAT_ST_BLOCKS) +fi +]) + +AC_DEFUN([BASH_CHECK_LIB_TERMCAP], +[ +if test "X$bash_cv_termcap_lib" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which library has the termcap functions) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_termcap_lib, +[AC_CHECK_FUNC(tgetent, bash_cv_termcap_lib=libc, + [AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap, + [AC_CHECK_LIB(tinfo, tgetent, bash_cv_termcap_lib=libtinfo, + [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses, + [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses, + [AC_CHECK_LIB(ncursesw, tgetent, bash_cv_termcap_lib=libncursesw, + bash_cv_termcap_lib=gnutermcap)])])])])])]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which library has the termcap functions) +fi +AC_MSG_RESULT(using $bash_cv_termcap_lib) +if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then +LDFLAGS="$LDFLAGS -L./lib/termcap" +TERMCAP_LIB="./lib/termcap/libtermcap.a" +TERMCAP_DEP="./lib/termcap/libtermcap.a" +elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then +TERMCAP_LIB=-ltermcap +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libtinfo; then +TERMCAP_LIB=-ltinfo +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libncurses; then +TERMCAP_LIB=-lncurses +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libc; then +TERMCAP_LIB= +TERMCAP_DEP= +else +TERMCAP_LIB=-lcurses +TERMCAP_DEP= +fi +]) + +dnl +dnl Check for the presence of getpeername in libsocket. +dnl If libsocket is present, check for libnsl and add it to LIBS if +dnl it's there, since most systems with libsocket require linking +dnl with libnsl as well. This should only be called if getpeername +dnl was not found in libc. +dnl +dnl NOTE: IF WE FIND GETPEERNAME, WE ASSUME THAT WE HAVE BIND/CONNECT +dnl AS WELL +dnl +AC_DEFUN(BASH_CHECK_LIB_SOCKET, +[ +if test "X$bash_cv_have_socklib" = "X"; then +_bash_needmsg= +else +AC_MSG_CHECKING(for socket library) +_bash_needmsg=yes +fi +AC_CACHE_VAL(bash_cv_have_socklib, +[AC_CHECK_LIB(socket, getpeername, + bash_cv_have_socklib=yes, bash_cv_have_socklib=no, -lnsl)]) +if test "X$_bash_needmsg" = Xyes; then + AC_MSG_RESULT($bash_cv_have_socklib) + _bash_needmsg= +fi +if test $bash_cv_have_socklib = yes; then + # check for libnsl, add it to LIBS if present + if test "X$bash_cv_have_libnsl" = "X"; then + _bash_needmsg= + else + AC_MSG_CHECKING(for libnsl) + _bash_needmsg=yes + fi + AC_CACHE_VAL(bash_cv_have_libnsl, + [AC_CHECK_LIB(nsl, t_open, + bash_cv_have_libnsl=yes, bash_cv_have_libnsl=no)]) + if test "X$_bash_needmsg" = Xyes; then + AC_MSG_RESULT($bash_cv_have_libnsl) + _bash_needmsg= + fi + if test $bash_cv_have_libnsl = yes; then + LIBS="-lsocket -lnsl $LIBS" + else + LIBS="-lsocket $LIBS" + fi + AC_DEFINE(HAVE_LIBSOCKET) + AC_DEFINE(HAVE_GETPEERNAME) +fi +]) + +AC_DEFUN(BASH_STRUCT_DIRENT_D_INO, +[AC_REQUIRE([AC_HEADER_DIRENT]) +AC_MSG_CHECKING(for struct dirent.d_ino) +AC_CACHE_VAL(bash_cv_dirent_has_dino, +[AC_TRY_COMPILE([ +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ +],[ +struct dirent d; int z; z = d.d_ino; +], bash_cv_dirent_has_dino=yes, bash_cv_dirent_has_dino=no)]) +AC_MSG_RESULT($bash_cv_dirent_has_dino) +if test $bash_cv_dirent_has_dino = yes; then +AC_DEFINE(HAVE_STRUCT_DIRENT_D_INO) +fi +]) + +AC_DEFUN(BASH_STRUCT_DIRENT_D_FILENO, +[AC_REQUIRE([AC_HEADER_DIRENT]) +AC_MSG_CHECKING(for struct dirent.d_fileno) +AC_CACHE_VAL(bash_cv_dirent_has_d_fileno, +[AC_TRY_COMPILE([ +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ +],[ +struct dirent d; int z; z = d.d_fileno; +], bash_cv_dirent_has_d_fileno=yes, bash_cv_dirent_has_d_fileno=no)]) +AC_MSG_RESULT($bash_cv_dirent_has_d_fileno) +if test $bash_cv_dirent_has_d_fileno = yes; then +AC_DEFINE(HAVE_STRUCT_DIRENT_D_FILENO) +fi +]) + +AC_DEFUN(BASH_STRUCT_DIRENT_D_NAMLEN, +[AC_REQUIRE([AC_HEADER_DIRENT]) +AC_MSG_CHECKING(for struct dirent.d_namlen) +AC_CACHE_VAL(bash_cv_dirent_has_d_namlen, +[AC_TRY_COMPILE([ +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ +],[ +struct dirent d; int z; z = d.d_namlen; +], bash_cv_dirent_has_d_namlen=yes, bash_cv_dirent_has_d_namlen=no)]) +AC_MSG_RESULT($bash_cv_dirent_has_d_namlen) +if test $bash_cv_dirent_has_d_namlen = yes; then +AC_DEFINE(HAVE_STRUCT_DIRENT_D_NAMLEN) +fi +]) + +AC_DEFUN(BASH_STRUCT_TIMEVAL, +[AC_MSG_CHECKING(for struct timeval in sys/time.h and time.h) +AC_CACHE_VAL(bash_cv_struct_timeval, +[ +AC_EGREP_HEADER(struct timeval, sys/time.h, + bash_cv_struct_timeval=yes, + AC_EGREP_HEADER(struct timeval, time.h, + bash_cv_struct_timeval=yes, + bash_cv_struct_timeval=no)) +]) +AC_MSG_RESULT($bash_cv_struct_timeval) +if test $bash_cv_struct_timeval = yes; then + AC_DEFINE(HAVE_TIMEVAL) +fi +]) + +AC_DEFUN(BASH_STRUCT_TIMEZONE, +[AC_MSG_CHECKING(for struct timezone in sys/time.h and time.h) +AC_CACHE_VAL(bash_cv_struct_timezone, +[ +AC_EGREP_HEADER(struct timezone, sys/time.h, + bash_cv_struct_timezone=yes, + AC_EGREP_HEADER(struct timezone, time.h, + bash_cv_struct_timezone=yes, + bash_cv_struct_timezone=no)) +]) +AC_MSG_RESULT($bash_cv_struct_timezone) +if test $bash_cv_struct_timezone = yes; then + AC_DEFINE(HAVE_STRUCT_TIMEZONE) +fi +]) + +AC_DEFUN(BASH_STRUCT_WINSIZE, +[AC_MSG_CHECKING(for struct winsize in sys/ioctl.h and termios.h) +AC_CACHE_VAL(bash_cv_struct_winsize_header, +[AC_TRY_COMPILE([#include +#include ], [struct winsize x;], + bash_cv_struct_winsize_header=ioctl_h, + [AC_TRY_COMPILE([#include +#include ], [struct winsize x;], + bash_cv_struct_winsize_header=termios_h, bash_cv_struct_winsize_header=other) +])]) +if test $bash_cv_struct_winsize_header = ioctl_h; then + AC_MSG_RESULT(sys/ioctl.h) + AC_DEFINE(STRUCT_WINSIZE_IN_SYS_IOCTL) +elif test $bash_cv_struct_winsize_header = termios_h; then + AC_MSG_RESULT(termios.h) + AC_DEFINE(STRUCT_WINSIZE_IN_TERMIOS) +else + AC_MSG_RESULT(not found) +fi +]) + +dnl Check type of signal routines (posix, 4.2bsd, 4.1bsd or v7) +AC_DEFUN(BASH_SYS_SIGNAL_VINTAGE, +[AC_REQUIRE([AC_TYPE_SIGNAL]) +AC_MSG_CHECKING(for type of signal functions) +AC_CACHE_VAL(bash_cv_signal_vintage, +[ + AC_TRY_LINK([#include ],[ + sigset_t ss; + struct sigaction sa; + sigemptyset(&ss); sigsuspend(&ss); + sigaction(SIGINT, &sa, (struct sigaction *) 0); + sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); + ], bash_cv_signal_vintage=posix, + [ + AC_TRY_LINK([#include ], [ + int mask = sigmask(SIGINT); + sigsetmask(mask); sigblock(mask); sigpause(mask); + ], bash_cv_signal_vintage=4.2bsd, + [ + AC_TRY_LINK([ + #include + RETSIGTYPE foo() { }], [ + int mask = sigmask(SIGINT); + sigset(SIGINT, foo); sigrelse(SIGINT); + sighold(SIGINT); sigpause(SIGINT); + ], bash_cv_signal_vintage=svr3, bash_cv_signal_vintage=v7 + )] + )] +) +]) +AC_MSG_RESULT($bash_cv_signal_vintage) +if test "$bash_cv_signal_vintage" = posix; then +AC_DEFINE(HAVE_POSIX_SIGNALS) +elif test "$bash_cv_signal_vintage" = "4.2bsd"; then +AC_DEFINE(HAVE_BSD_SIGNALS) +elif test "$bash_cv_signal_vintage" = svr3; then +AC_DEFINE(HAVE_USG_SIGHOLD) +fi +]) + +dnl Check if the pgrp of setpgrp() can't be the pid of a zombie process. +AC_DEFUN(BASH_SYS_PGRP_SYNC, +[AC_REQUIRE([AC_FUNC_GETPGRP]) +AC_MSG_CHECKING(whether pgrps need synchronization) +AC_CACHE_VAL(bash_cv_pgrp_pipe, +[AC_TRY_RUN([ +#ifdef HAVE_UNISTD_H +# include +#endif +main() +{ +# ifdef GETPGRP_VOID +# define getpgID() getpgrp() +# else +# define getpgID() getpgrp(0) +# define setpgid(x,y) setpgrp(x,y) +# endif + int pid1, pid2, fds[2]; + int status; + char ok; + + switch (pid1 = fork()) { + case -1: + exit(1); + case 0: + setpgid(0, getpid()); + exit(0); + } + setpgid(pid1, pid1); + + sleep(2); /* let first child die */ + + if (pipe(fds) < 0) + exit(2); + + switch (pid2 = fork()) { + case -1: + exit(3); + case 0: + setpgid(0, pid1); + ok = getpgID() == pid1; + write(fds[1], &ok, 1); + exit(0); + } + setpgid(pid2, pid1); + + close(fds[1]); + if (read(fds[0], &ok, 1) != 1) + exit(4); + wait(&status); + wait(&status); + exit(ok ? 0 : 5); +} +], bash_cv_pgrp_pipe=no,bash_cv_pgrp_pipe=yes, + [AC_MSG_WARN(cannot check pgrp synchronization if cross compiling -- defaulting to no) + bash_cv_pgrp_pipe=no]) +]) +AC_MSG_RESULT($bash_cv_pgrp_pipe) +if test $bash_cv_pgrp_pipe = yes; then +AC_DEFINE(PGRP_PIPE) +fi +]) + +AC_DEFUN(BASH_SYS_REINSTALL_SIGHANDLERS, +[AC_REQUIRE([AC_TYPE_SIGNAL]) +AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) +AC_MSG_CHECKING([if signal handlers must be reinstalled when invoked]) +AC_CACHE_VAL(bash_cv_must_reinstall_sighandlers, +[AC_TRY_RUN([ +#include +#ifdef HAVE_UNISTD_H +#include +#endif + +typedef RETSIGTYPE sigfunc(); + +volatile int nsigint; + +#ifdef HAVE_POSIX_SIGNALS +sigfunc * +set_signal_handler(sig, handler) + int sig; + sigfunc *handler; +{ + struct sigaction act, oact; + act.sa_handler = handler; + act.sa_flags = 0; + sigemptyset (&act.sa_mask); + sigemptyset (&oact.sa_mask); + sigaction (sig, &act, &oact); + return (oact.sa_handler); +} +#else +#define set_signal_handler(s, h) signal(s, h) +#endif + +RETSIGTYPE +sigint(s) +int s; +{ + nsigint++; +} + +main() +{ + nsigint = 0; + set_signal_handler(SIGINT, sigint); + kill((int)getpid(), SIGINT); + kill((int)getpid(), SIGINT); + exit(nsigint != 2); +} +], bash_cv_must_reinstall_sighandlers=no, bash_cv_must_reinstall_sighandlers=yes, + [AC_MSG_WARN(cannot check signal handling if cross compiling -- defaulting to no) + bash_cv_must_reinstall_sighandlers=no] +)]) +AC_MSG_RESULT($bash_cv_must_reinstall_sighandlers) +if test $bash_cv_must_reinstall_sighandlers = yes; then +AC_DEFINE(MUST_REINSTALL_SIGHANDLERS) +fi +]) + +dnl check that some necessary job control definitions are present +AC_DEFUN(BASH_SYS_JOB_CONTROL_MISSING, +[AC_REQUIRE([BASH_SYS_SIGNAL_VINTAGE]) +AC_MSG_CHECKING(for presence of necessary job control definitions) +AC_CACHE_VAL(bash_cv_job_control_missing, +[AC_TRY_COMPILE([ +#include +#ifdef HAVE_SYS_WAIT_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif +#include + +/* add more tests in here as appropriate */ + +/* signal type */ +#if !defined (HAVE_POSIX_SIGNALS) && !defined (HAVE_BSD_SIGNALS) +#error +#endif + +/* signals and tty control. */ +#if !defined (SIGTSTP) || !defined (SIGSTOP) || !defined (SIGCONT) +#error +#endif + +/* process control */ +#if !defined (WNOHANG) || !defined (WUNTRACED) +#error +#endif + +/* Posix systems have tcgetpgrp and waitpid. */ +#if defined (_POSIX_VERSION) && !defined (HAVE_TCGETPGRP) +#error +#endif + +#if defined (_POSIX_VERSION) && !defined (HAVE_WAITPID) +#error +#endif + +/* Other systems have TIOCSPGRP/TIOCGPRGP and wait3. */ +#if !defined (_POSIX_VERSION) && !defined (HAVE_WAIT3) +#error +#endif + +], , bash_cv_job_control_missing=present, bash_cv_job_control_missing=missing +)]) +AC_MSG_RESULT($bash_cv_job_control_missing) +if test $bash_cv_job_control_missing = missing; then +AC_DEFINE(JOB_CONTROL_MISSING) +fi +]) + +dnl check whether named pipes are present +dnl this requires a previous check for mkfifo, but that is awkward to specify +AC_DEFUN(BASH_SYS_NAMED_PIPES, +[AC_MSG_CHECKING(for presence of named pipes) +AC_CACHE_VAL(bash_cv_sys_named_pipes, +[AC_TRY_RUN([ +#include +#include +#ifdef HAVE_UNISTD_H +#include +#endif + +/* Add more tests in here as appropriate. */ +main() +{ +int fd, err; + +#if defined (HAVE_MKFIFO) +exit (0); +#endif + +#if !defined (S_IFIFO) && (defined (_POSIX_VERSION) && !defined (S_ISFIFO)) +exit (1); +#endif + +#if defined (NeXT) +exit (1); +#endif +err = mkdir("bash-aclocal", 0700); +if (err < 0) { + perror ("mkdir"); + exit(1); +} +fd = mknod ("bash-aclocal/sh-np-autoconf", 0666 | S_IFIFO, 0); +if (fd == -1) { + rmdir ("bash-aclocal"); + exit (1); +} +close(fd); +unlink ("bash-aclocal/sh-np-autoconf"); +rmdir ("bash-aclocal"); +exit(0); +}], bash_cv_sys_named_pipes=present, bash_cv_sys_named_pipes=missing, + [AC_MSG_WARN(cannot check for named pipes if cross-compiling -- defaulting to missing) + bash_cv_sys_named_pipes=missing] +)]) +AC_MSG_RESULT($bash_cv_sys_named_pipes) +if test $bash_cv_sys_named_pipes = missing; then +AC_DEFINE(NAMED_PIPES_MISSING) +fi +]) + +AC_DEFUN(BASH_SYS_DEFAULT_MAIL_DIR, +[AC_MSG_CHECKING(for default mail directory) +AC_CACHE_VAL(bash_cv_mail_dir, +[if test -d /var/mail; then + bash_cv_mail_dir=/var/mail + elif test -d /var/spool/mail; then + bash_cv_mail_dir=/var/spool/mail + elif test -d /usr/mail; then + bash_cv_mail_dir=/usr/mail + elif test -d /usr/spool/mail; then + bash_cv_mail_dir=/usr/spool/mail + else + bash_cv_mail_dir=unknown + fi +]) +AC_MSG_RESULT($bash_cv_mail_dir) +AC_DEFINE_UNQUOTED(DEFAULT_MAIL_DIRECTORY, "$bash_cv_mail_dir") +]) + +AC_DEFUN(BASH_HAVE_TIOCGWINSZ, +[AC_MSG_CHECKING(for TIOCGWINSZ in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_tiocgwinsz_in_ioctl, +[AC_TRY_COMPILE([#include +#include ], [int x = TIOCGWINSZ;], + bash_cv_tiocgwinsz_in_ioctl=yes,bash_cv_tiocgwinsz_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_tiocgwinsz_in_ioctl) +if test $bash_cv_tiocgwinsz_in_ioctl = yes; then +AC_DEFINE(GWINSZ_IN_SYS_IOCTL) +fi +]) + +AC_DEFUN(BASH_HAVE_TIOCSTAT, +[AC_MSG_CHECKING(for TIOCSTAT in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_tiocstat_in_ioctl, +[AC_TRY_COMPILE([#include +#include ], [int x = TIOCSTAT;], + bash_cv_tiocstat_in_ioctl=yes,bash_cv_tiocstat_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_tiocstat_in_ioctl) +if test $bash_cv_tiocstat_in_ioctl = yes; then +AC_DEFINE(TIOCSTAT_IN_SYS_IOCTL) +fi +]) + +AC_DEFUN(BASH_HAVE_FIONREAD, +[AC_MSG_CHECKING(for FIONREAD in sys/ioctl.h) +AC_CACHE_VAL(bash_cv_fionread_in_ioctl, +[AC_TRY_COMPILE([#include +#include ], [int x = FIONREAD;], + bash_cv_fionread_in_ioctl=yes,bash_cv_fionread_in_ioctl=no)]) +AC_MSG_RESULT($bash_cv_fionread_in_ioctl) +if test $bash_cv_fionread_in_ioctl = yes; then +AC_DEFINE(FIONREAD_IN_SYS_IOCTL) +fi +]) + +dnl +dnl See if speed_t is declared in . Some versions of linux +dnl require a definition of speed_t each time is included, +dnl but you can only get speed_t if you include (on some +dnl versions) or (on others). +dnl +AC_DEFUN(BASH_CHECK_SPEED_T, +[AC_MSG_CHECKING(for speed_t in sys/types.h) +AC_CACHE_VAL(bash_cv_speed_t_in_sys_types, +[AC_TRY_COMPILE([#include ], [speed_t x;], + bash_cv_speed_t_in_sys_types=yes,bash_cv_speed_t_in_sys_types=no)]) +AC_MSG_RESULT($bash_cv_speed_t_in_sys_types) +if test $bash_cv_speed_t_in_sys_types = yes; then +AC_DEFINE(SPEED_T_IN_SYS_TYPES) +fi +]) + +AC_DEFUN(BASH_CHECK_GETPW_FUNCS, +[AC_MSG_CHECKING(whether getpw functions are declared in pwd.h) +AC_CACHE_VAL(bash_cv_getpw_declared, +[AC_EGREP_CPP(getpwuid, +[ +#include +#ifdef HAVE_UNISTD_H +# include +#endif +#include +], +bash_cv_getpw_declared=yes,bash_cv_getpw_declared=no)]) +AC_MSG_RESULT($bash_cv_getpw_declared) +if test $bash_cv_getpw_declared = yes; then +AC_DEFINE(HAVE_GETPW_DECLS) +fi +]) + +AC_DEFUN(BASH_CHECK_DEV_FD, +[AC_MSG_CHECKING(whether /dev/fd is available) +AC_CACHE_VAL(bash_cv_dev_fd, +[bash_cv_dev_fd="" +if test -d /dev/fd && (exec test -r /dev/fd/0 < /dev/null) ; then +# check for systems like FreeBSD 5 that only provide /dev/fd/[012] + if (exec test -r /dev/fd/3 3 +#include +], +[ + int f; + f = RLIMIT_DATA; +], bash_cv_kernel_rlimit=no, +[AC_TRY_COMPILE([ +#include +#define _KERNEL +#include +#undef _KERNEL +], +[ + int f; + f = RLIMIT_DATA; +], bash_cv_kernel_rlimit=yes, bash_cv_kernel_rlimit=no)] +)]) +AC_MSG_RESULT($bash_cv_kernel_rlimit) +if test $bash_cv_kernel_rlimit = yes; then +AC_DEFINE(RLIMIT_NEEDS_KERNEL) +fi +]) + +dnl +dnl Check for 64-bit off_t -- used for malloc alignment +dnl +dnl C does not allow duplicate case labels, so the compile will fail if +dnl sizeof(off_t) is > 4. +dnl +AC_DEFUN(BASH_CHECK_OFF_T_64, +[AC_CACHE_CHECK(for 64-bit off_t, bash_cv_off_t_64, +AC_TRY_COMPILE([ +#ifdef HAVE_UNISTD_H +#include +#endif +#include +],[ +switch (0) case 0: case (sizeof (off_t) <= 4):; +], bash_cv_off_t_64=no, bash_cv_off_t_64=yes)) +if test $bash_cv_off_t_64 = yes; then + AC_DEFINE(HAVE_OFF_T_64) +fi]) + +AC_DEFUN(BASH_CHECK_RTSIGS, +[AC_MSG_CHECKING(for unusable real-time signals due to large values) +AC_CACHE_VAL(bash_cv_unusable_rtsigs, +[AC_TRY_RUN([ +#include +#include + +#ifndef NSIG +# define NSIG 64 +#endif + +main () +{ + int n_sigs = 2 * NSIG; +#ifdef SIGRTMIN + int rtmin = SIGRTMIN; +#else + int rtmin = 0; +#endif + + exit(rtmin < n_sigs); +}], bash_cv_unusable_rtsigs=yes, bash_cv_unusable_rtsigs=no, + [AC_MSG_WARN(cannot check real-time signals if cross compiling -- defaulting to yes) + bash_cv_unusable_rtsigs=yes] +)]) +AC_MSG_RESULT($bash_cv_unusable_rtsigs) +if test $bash_cv_unusable_rtsigs = yes; then +AC_DEFINE(UNUSABLE_RT_SIGNALS) +fi +]) + +dnl +dnl check for availability of multibyte characters and functions +dnl +dnl geez, I wish I didn't have to check for all of this stuff separately +dnl +AC_DEFUN(BASH_CHECK_MULTIBYTE, +[ +AC_CHECK_HEADERS(wctype.h) +AC_CHECK_HEADERS(wchar.h) +AC_CHECK_HEADERS(langinfo.h) + +AC_CHECK_HEADERS(mbstr.h) + +AC_CHECK_FUNC(mbrlen, AC_DEFINE(HAVE_MBRLEN)) +AC_CHECK_FUNC(mbscasecmp, AC_DEFINE(HAVE_MBSCMP)) +AC_CHECK_FUNC(mbscmp, AC_DEFINE(HAVE_MBSCMP)) +AC_CHECK_FUNC(mbsnrtowcs, AC_DEFINE(HAVE_MBSNRTOWCS)) +AC_CHECK_FUNC(mbsrtowcs, AC_DEFINE(HAVE_MBSRTOWCS)) + +AC_REPLACE_FUNCS(mbschr) + +AC_CHECK_FUNC(wcrtomb, AC_DEFINE(HAVE_WCRTOMB)) +AC_CHECK_FUNC(wcscoll, AC_DEFINE(HAVE_WCSCOLL)) +AC_CHECK_FUNC(wcsdup, AC_DEFINE(HAVE_WCSDUP)) +AC_CHECK_FUNC(wcwidth, AC_DEFINE(HAVE_WCWIDTH)) +AC_CHECK_FUNC(wctype, AC_DEFINE(HAVE_WCTYPE)) + +AC_REPLACE_FUNCS(wcswidth) + +dnl checks for both mbrtowc and mbstate_t +AC_FUNC_MBRTOWC +if test $ac_cv_func_mbrtowc = yes; then + AC_DEFINE(HAVE_MBSTATE_T) +fi + +AC_CHECK_FUNCS(iswlower iswupper towlower towupper iswctype) + +AC_CACHE_CHECK([for nl_langinfo and CODESET], bash_cv_langinfo_codeset, +[AC_TRY_LINK( +[#include ], +[char* cs = nl_langinfo(CODESET);], +bash_cv_langinfo_codeset=yes, bash_cv_langinfo_codeset=no)]) +if test $bash_cv_langinfo_codeset = yes; then + AC_DEFINE(HAVE_LANGINFO_CODESET) +fi + +dnl check for wchar_t in +AC_CACHE_CHECK([for wchar_t in wchar.h], bash_cv_type_wchar_t, +[AC_TRY_COMPILE( +[#include +], +[ + wchar_t foo; + foo = 0; +], bash_cv_type_wchar_t=yes, bash_cv_type_wchar_t=no)]) +if test $bash_cv_type_wchar_t = yes; then + AC_DEFINE(HAVE_WCHAR_T, 1, [systems should define this type here]) +fi + +dnl check for wctype_t in +AC_CACHE_CHECK([for wctype_t in wctype.h], bash_cv_type_wctype_t, +[AC_TRY_COMPILE( +[#include ], +[ + wctype_t foo; + foo = 0; +], bash_cv_type_wctype_t=yes, bash_cv_type_wctype_t=no)]) +if test $bash_cv_type_wctype_t = yes; then + AC_DEFINE(HAVE_WCTYPE_T, 1, [systems should define this type here]) +fi + +dnl check for wint_t in +AC_CACHE_CHECK([for wint_t in wctype.h], bash_cv_type_wint_t, +[AC_TRY_COMPILE( +[#include ], +[ + wint_t foo; + foo = 0; +], bash_cv_type_wint_t=yes, bash_cv_type_wint_t=no)]) +if test $bash_cv_type_wint_t = yes; then + AC_DEFINE(HAVE_WINT_T, 1, [systems should define this type here]) +fi + +dnl check for broken wcwidth +AC_CACHE_CHECK([for wcwidth broken with unicode combining characters], +bash_cv_wcwidth_broken, +[AC_TRY_RUN([ +#include +#include +#include + +#include +#include + +main(c, v) +int c; +char **v; +{ + int w; + + setlocale(LC_ALL, "en_US.UTF-8"); + w = wcwidth (0x0301); + exit (w == 0); /* exit 0 if wcwidth broken */ +} +], +bash_cv_wcwidth_broken=yes, bash_cv_wcwidth_broken=no, bash_cv_wcwidth_broken=no)]) +if test "$bash_cv_wcwidth_broken" = yes; then + AC_DEFINE(WCWIDTH_BROKEN, 1, [wcwidth is usually not broken]) +fi + +if test "$am_cv_func_iconv" = yes; then + OLDLIBS="$LIBS" + LIBS="$LIBS $LIBINTL $LIBICONV" + AC_CHECK_FUNCS(locale_charset) + LIBS="$OLDLIBS" +fi + +AC_CHECK_SIZEOF(wchar_t, 4) + +]) + +dnl need: prefix exec_prefix libdir includedir CC TERMCAP_LIB +dnl require: +dnl AC_PROG_CC +dnl BASH_CHECK_LIB_TERMCAP + +AC_DEFUN([RL_LIB_READLINE_VERSION], +[ +AC_REQUIRE([BASH_CHECK_LIB_TERMCAP]) + +AC_MSG_CHECKING([version of installed readline library]) + +# What a pain in the ass this is. + +# save cpp and ld options +_save_CFLAGS="$CFLAGS" +_save_LDFLAGS="$LDFLAGS" +_save_LIBS="$LIBS" + +# Don't set ac_cv_rl_prefix if the caller has already assigned a value. This +# allows the caller to do something like $_rl_prefix=$withval if the user +# specifies --with-installed-readline=PREFIX as an argument to configure + +if test -z "$ac_cv_rl_prefix"; then +test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix} +fi + +eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include +eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib + +LIBS="$LIBS -lreadline ${TERMCAP_LIB}" +CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}" +LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}" + +AC_CACHE_VAL(ac_cv_rl_version, +[AC_TRY_RUN([ +#include +#include + +extern int rl_gnu_readline_p; + +main() +{ + FILE *fp; + fp = fopen("conftest.rlv", "w"); + if (fp == 0) + exit(1); + if (rl_gnu_readline_p != 1) + fprintf(fp, "0.0\n"); + else + fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0"); + fclose(fp); + exit(0); +} +], +ac_cv_rl_version=`cat conftest.rlv`, +ac_cv_rl_version='0.0', +ac_cv_rl_version='8.0')]) + +CFLAGS="$_save_CFLAGS" +LDFLAGS="$_save_LDFLAGS" +LIBS="$_save_LIBS" + +RL_MAJOR=0 +RL_MINOR=0 + +# ( +case "$ac_cv_rl_version" in +2*|3*|4*|5*|6*|7*|8*|9*) + RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'` + RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[[a-zA-Z]]*$::'` + ;; +esac + +# ((( +case $RL_MAJOR in +[[0-9][0-9]]) _RL_MAJOR=$RL_MAJOR ;; +[[0-9]]) _RL_MAJOR=0$RL_MAJOR ;; +*) _RL_MAJOR=00 ;; +esac + +# ((( +case $RL_MINOR in +[[0-9][0-9]]) _RL_MINOR=$RL_MINOR ;; +[[0-9]]) _RL_MINOR=0$RL_MINOR ;; +*) _RL_MINOR=00 ;; +esac + +RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}" + +# Readline versions greater than 4.2 have these defines in readline.h + +if test $ac_cv_rl_version = '0.0' ; then + AC_MSG_WARN([Could not test version of installed readline library.]) +elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then + # set these for use by the caller + RL_PREFIX=$ac_cv_rl_prefix + RL_LIBDIR=$ac_cv_rl_libdir + RL_INCLUDEDIR=$ac_cv_rl_includedir + AC_MSG_RESULT($ac_cv_rl_version) +else + +AC_DEFINE_UNQUOTED(RL_READLINE_VERSION, $RL_VERSION, [encoded version of the installed readline library]) +AC_DEFINE_UNQUOTED(RL_VERSION_MAJOR, $RL_MAJOR, [major version of installed readline library]) +AC_DEFINE_UNQUOTED(RL_VERSION_MINOR, $RL_MINOR, [minor version of installed readline library]) + +AC_SUBST(RL_VERSION) +AC_SUBST(RL_MAJOR) +AC_SUBST(RL_MINOR) + +# set these for use by the caller +RL_PREFIX=$ac_cv_rl_prefix +RL_LIBDIR=$ac_cv_rl_libdir +RL_INCLUDEDIR=$ac_cv_rl_includedir + +AC_MSG_RESULT($ac_cv_rl_version) + +fi +]) + +AC_DEFUN(BASH_FUNC_CTYPE_NONASCII, +[ +AC_MSG_CHECKING(whether the ctype macros accept non-ascii characters) +AC_CACHE_VAL(bash_cv_func_ctype_nonascii, +[AC_TRY_RUN([ +#ifdef HAVE_LOCALE_H +#include +#endif +#include +#include + +main(c, v) +int c; +char *v[]; +{ + char *deflocale; + unsigned char x; + int r1, r2; + +#ifdef HAVE_SETLOCALE + /* We take a shot here. If that locale is not known, try the + system default. We try this one because '\342' (226) is + known to be a printable character in that locale. */ + deflocale = setlocale(LC_ALL, "en_US.ISO8859-1"); + if (deflocale == 0) + deflocale = setlocale(LC_ALL, ""); +#endif + + x = '\342'; + r1 = isprint(x); + x -= 128; + r2 = isprint(x); + exit (r1 == 0 || r2 == 0); +} +], bash_cv_func_ctype_nonascii=yes, bash_cv_func_ctype_nonascii=no, + [AC_MSG_WARN(cannot check ctype macros if cross compiling -- defaulting to no) + bash_cv_func_ctype_nonascii=no] +)]) +AC_MSG_RESULT($bash_cv_func_ctype_nonascii) +if test $bash_cv_func_ctype_nonascii = yes; then +AC_DEFINE(CTYPE_NON_ASCII) +fi +]) + +AC_DEFUN(BASH_CHECK_WCONTINUED, +[ +AC_MSG_CHECKING(whether WCONTINUED flag to waitpid is unavailable or available but broken) +AC_CACHE_VAL(bash_cv_wcontinued_broken, +[AC_TRY_RUN([ +#include +#include +#include +#include + +#ifndef errno +extern int errno; +#endif +main() +{ + int x; + + x = waitpid(-1, (int *)0, WNOHANG|WCONTINUED); + if (x == -1 && errno == EINVAL) + exit (1); + else + exit (0); +} +], bash_cv_wcontinued_broken=no,bash_cv_wcontinued_broken=yes, + [AC_MSG_WARN(cannot check WCONTINUED if cross compiling -- defaulting to no) + bash_cv_wcontinued_broken=no] +)]) +AC_MSG_RESULT($bash_cv_wcontinued_broken) +if test $bash_cv_wcontinued_broken = yes; then +AC_DEFINE(WCONTINUED_BROKEN) +fi +]) + +dnl +dnl tests added for bashdb +dnl + + +AC_DEFUN([AM_PATH_LISPDIR], + [AC_ARG_WITH(lispdir, AC_HELP_STRING([--with-lispdir], [override the default lisp directory]), + [ lispdir="$withval" + AC_MSG_CHECKING([where .elc files should go]) + AC_MSG_RESULT([$lispdir])], + [ + # If set to t, that means we are running in a shell under Emacs. + # If you have an Emacs named "t", then use the full path. + test x"$EMACS" = xt && EMACS= + AC_CHECK_PROGS(EMACS, emacs xemacs, no) + if test $EMACS != "no"; then + if test x${lispdir+set} != xset; then + AC_CACHE_CHECK([where .elc files should go], [am_cv_lispdir], [dnl + am_cv_lispdir=`$EMACS -batch -q -eval '(while load-path (princ (concat (car load-path) "\n")) (setq load-path (cdr load-path)))' | sed -n -e 's,/$,,' -e '/.*\/lib\/\(x\?emacs\/site-lisp\)$/{s,,${libdir}/\1,;p;q;}' -e '/.*\/share\/\(x\?emacs\/site-lisp\)$/{s,,${datadir}/\1,;p;q;}'` + if test -z "$am_cv_lispdir"; then + am_cv_lispdir='${datadir}/emacs/site-lisp' + fi + ]) + lispdir="$am_cv_lispdir" + fi + fi + ]) + AC_SUBST(lispdir) +]) + +dnl +dnl tests added for gettext +dnl +# codeset.m4 serial AM1 (gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_LANGINFO_CODESET], +[ + AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, + [AC_TRY_LINK([#include ], + [char* cs = nl_langinfo(CODESET);], + am_cv_langinfo_codeset=yes, + am_cv_langinfo_codeset=no) + ]) + if test $am_cv_langinfo_codeset = yes; then + AC_DEFINE(HAVE_LANGINFO_CODESET, 1, + [Define if you have and nl_langinfo(CODESET).]) + fi +]) +# gettext.m4 serial 20 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Macro to add for using GNU gettext. + +dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). +dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The +dnl default (if it is not specified or empty) is 'no-libtool'. +dnl INTLSYMBOL should be 'external' for packages with no intl directory, +dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. +dnl If INTLSYMBOL is 'use-libtool', then a libtool library +dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, +dnl depending on --{enable,disable}-{shared,static} and on the presence of +dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library +dnl $(top_builddir)/intl/libintl.a will be created. +dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext +dnl implementations (in libc or libintl) without the ngettext() function +dnl will be ignored. If NEEDSYMBOL is specified and is +dnl 'need-formatstring-macros', then GNU gettext implementations that don't +dnl support the ISO C 99 formatstring macros will be ignored. +dnl INTLDIR is used to find the intl libraries. If empty, +dnl the value `$(top_builddir)/intl/' is used. +dnl +dnl The result of the configuration is one of three cases: +dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled +dnl and used. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 2) GNU gettext has been found in the system's C library. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 3) No internationalization, always use English msgid. +dnl Catalog format: none +dnl Catalog extension: none +dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. +dnl The use of .gmo is historical (it was needed to avoid overwriting the +dnl GNU format catalogs when building on a platform with an X/Open gettext), +dnl but we keep it in order not to force irrelevant filename changes on the +dnl maintainers. +dnl +AC_DEFUN([AM_GNU_GETTEXT], +[ + dnl Argument checking. + ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , + [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT +])])])])]) + ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , + [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT +])])])]) + define(gt_included_intl, ifelse([$1], [external], [no], [yes])) + define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) + + AC_REQUIRE([AM_PO_SUBDIRS])dnl + ifelse(gt_included_intl, yes, [ + AC_REQUIRE([AM_INTL_SUBDIR])dnl + ]) + + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Sometimes libintl requires libiconv, so first search for libiconv. + dnl Ideally we would do this search only after the + dnl if test "$USE_NLS" = "yes"; then + dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT + dnl the configure script would need to contain the same shell code + dnl again, outside any 'if'. There are two solutions: + dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. + dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. + dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not + dnl documented, we avoid it. + ifelse(gt_included_intl, yes, , [ + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + ]) + + dnl Set USE_NLS. + AM_NLS + + ifelse(gt_included_intl, yes, [ + BUILD_INCLUDED_LIBINTL=no + USE_INCLUDED_LIBINTL=no + ]) + LIBINTL= + LTLIBINTL= + POSUB= + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + ifelse(gt_included_intl, yes, [ + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH(included-gettext, + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + ]) + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If GNU gettext is available we use this. Else we have + dnl to fall back to GNU NLS library. + + dnl Add a version number to the cache macros. + define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1))) + define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) + define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) + + AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, + [AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings;], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], + gt_cv_func_gnugettext_libc=yes, + gt_cv_func_gnugettext_libc=no)]) + + if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl Sometimes libintl requires libiconv, so first search for libiconv. + ifelse(gt_included_intl, yes, , [ + AM_ICONV_LINK + ]) + dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL + dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) + dnl because that would add "-liconv" to LIBINTL and LTLIBINTL + dnl even if libiconv doesn't exist. + AC_LIB_LINKFLAGS_BODY([intl]) + AC_CACHE_CHECK([for GNU gettext in libintl], + gt_cv_func_gnugettext_libintl, + [gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + dnl Now see whether libintl exists and does not depend on libiconv. + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + gt_cv_func_gnugettext_libintl=yes, + gt_cv_func_gnugettext_libintl=no) + dnl Now see whether libintl exists and depends on libiconv. + if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + [LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + gt_cv_func_gnugettext_libintl=yes + ]) + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS"]) + fi + + dnl If an already present or preinstalled GNU gettext() is found, + dnl use it. But if this macro is used in GNU gettext, and GNU + dnl gettext is already preinstalled in libintl, we update this + dnl libintl. (Cf. the install rule in intl/Makefile.in.) + if test "$gt_cv_func_gnugettext_libc" = "yes" \ + || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + dnl Reset the values set by searching for libintl. + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + ifelse(gt_included_intl, yes, [ + if test "$gt_use_preinstalled_gnugettext" != "yes"; then + dnl GNU gettext is not found in the C library. + dnl Fall back on included GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + BUILD_INCLUDED_LIBINTL=yes + USE_INCLUDED_LIBINTL=yes + LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" + LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions to use GNU gettext tools. + CATOBJEXT=.gmo + fi + ]) + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + AC_DEFINE(ENABLE_NLS, 1, + [Define to 1 if translation of program messages to the user's native language + is requested.]) + else + USE_NLS=no + fi + fi + + AC_MSG_CHECKING([whether to use NLS]) + AC_MSG_RESULT([$USE_NLS]) + if test "$USE_NLS" = "yes"; then + AC_MSG_CHECKING([where the gettext function comes from]) + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + AC_MSG_RESULT([$gt_source]) + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + AC_MSG_CHECKING([how to link with libintl]) + AC_MSG_RESULT([$LIBINTL]) + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) + fi + + dnl For backward compatibility. Some packages may be using this. + AC_DEFINE(HAVE_GETTEXT, 1, + [Define if the GNU gettext() function is already present or preinstalled.]) + AC_DEFINE(HAVE_DCGETTEXT, 1, + [Define if the GNU dcgettext() function is already present or preinstalled.]) + fi + + dnl We need to process the po/ directory. + POSUB=po + fi + + ifelse(gt_included_intl, yes, [ + dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + dnl to 'yes' because some of the testsuite requires it. + if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then + BUILD_INCLUDED_LIBINTL=yes + fi + + dnl Make all variables we use known to autoconf. + AC_SUBST(BUILD_INCLUDED_LIBINTL) + AC_SUBST(USE_INCLUDED_LIBINTL) + AC_SUBST(CATOBJEXT) + + dnl For backward compatibility. Some configure.ins may be using this. + nls_cv_header_intl= + nls_cv_header_libgt= + + dnl For backward compatibility. Some Makefiles may be using this. + DATADIRNAME=share + AC_SUBST(DATADIRNAME) + + dnl For backward compatibility. Some Makefiles may be using this. + INSTOBJEXT=.mo + AC_SUBST(INSTOBJEXT) + + dnl For backward compatibility. Some Makefiles may be using this. + GENCAT=gencat + AC_SUBST(GENCAT) + + dnl For backward compatibility. Some Makefiles may be using this. + if test "$USE_INCLUDED_LIBINTL" = yes; then + INTLOBJS="\$(GETTOBJS)" + fi + AC_SUBST(INTLOBJS) + + dnl Enable libtool support if the surrounding package wishes it. + INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix + AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) + ]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLLIBS="$LIBINTL" + AC_SUBST(INTLLIBS) + + dnl Make all documented variables known to autoconf. + AC_SUBST(LIBINTL) + AC_SUBST(LTLIBINTL) + AC_SUBST(POSUB) +]) + + +dnl Checks for all prerequisites of the intl subdirectory, +dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, +dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. +AC_DEFUN([AM_INTL_SUBDIR], +[ + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_ISC_POSIX])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_C_CONST])dnl + AC_REQUIRE([AC_C_INLINE])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([jm_GLIBC21])dnl + AC_REQUIRE([gt_INTDIV0])dnl + AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl + AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl + AC_REQUIRE([gt_INTTYPES_PRI])dnl + + AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ +stdlib.h string.h unistd.h sys/param.h]) + AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ +geteuid getgid getuid mempcpy munmap putenv setenv setlocale localeconv stpcpy \ +strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ +__fsetlocking]) + + AM_ICONV + AM_LANGINFO_CODESET + if test $ac_cv_header_locale_h = yes; then + AM_LC_MESSAGES + fi + + dnl intl/plural.c is generated from intl/plural.y. It requires bison, + dnl because plural.y uses bison specific features. It requires at least + dnl bison-1.26 because earlier versions generate a plural.c that doesn't + dnl compile. + dnl bison is only needed for the maintainer (who touches plural.y). But in + dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put + dnl the rule in general Makefile. Now, some people carelessly touch the + dnl files or have a broken "make" program, hence the plural.c rule will + dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not + dnl present or too old. + AC_CHECK_PROGS([INTLBISON], [bison]) + if test -z "$INTLBISON"; then + ac_verc_fail=yes + else + dnl Found it, now check the version. + AC_MSG_CHECKING([version of bison]) +changequote(<<,>>)dnl + ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` + case $ac_prog_version in + '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; + 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) +changequote([,])dnl + ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; + *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; + esac + AC_MSG_RESULT([$ac_prog_version]) + fi + if test $ac_verc_fail = yes; then + INTLBISON=: + fi +]) + + +dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) +# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# Test for the GNU C Library, version 2.1 or newer. +# From Bruno Haible. + +AC_DEFUN([jm_GLIBC21], + [ + AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, + ac_cv_gnu_library_2_1, + [AC_EGREP_CPP([Lucky GNU user], + [ +#include +#ifdef __GNU_LIBRARY__ + #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) + Lucky GNU user + #endif +#endif + ], + ac_cv_gnu_library_2_1=yes, + ac_cv_gnu_library_2_1=no) + ] + ) + AC_SUBST(GLIBC21) + GLIBC21="$ac_cv_gnu_library_2_1" + ] +) +# iconv.m4 serial AM4 (gettext-0.11.3) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], +[ + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([iconv]) +]) + +AC_DEFUN([AM_ICONV_LINK], +[ + dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and + dnl those with the standalone portable GNU libiconv installed). + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + + dnl Add $INCICONV to CPPFLAGS before performing the following checks, + dnl because if the user has installed libiconv and not disabled its use + dnl via --without-libiconv-prefix, he wants to use it. The first + dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. + am_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) + + AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_func_iconv=yes) + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_lib_iconv=yes + am_cv_func_iconv=yes) + LIBS="$am_save_LIBS" + fi + ]) + if test "$am_cv_func_iconv" = yes; then + AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) + fi + if test "$am_cv_lib_iconv" = yes; then + AC_MSG_CHECKING([how to link with libiconv]) + AC_MSG_RESULT([$LIBICONV]) + else + dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV + dnl either. + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + AC_SUBST(LIBICONV) + AC_SUBST(LTLIBICONV) +]) + +AC_DEFUN([AM_ICONV], +[ + AM_ICONV_LINK + if test "$am_cv_func_iconv" = yes; then + AC_MSG_CHECKING([for iconv declaration]) + AC_CACHE_VAL(am_cv_proto_iconv, [ + AC_TRY_COMPILE([ +#include +#include +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); +#else +size_t iconv(); +#endif +], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) + am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + AC_MSG_RESULT([$]{ac_t:- + }[$]am_cv_proto_iconv) + AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, + [Define as const if the declaration of iconv() needs const.]) + fi +]) +# intdiv0.m4 serial 1 (gettext-0.11.3) +dnl Copyright (C) 2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([gt_INTDIV0], +[ + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + + AC_CACHE_CHECK([whether integer division by zero raises SIGFPE], + gt_cv_int_divbyzero_sigfpe, + [ + AC_TRY_RUN([ +#include +#include + +static void +#ifdef __cplusplus +sigfpe_handler (int sig) +#else +sigfpe_handler (sig) int sig; +#endif +{ + /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ + exit (sig != SIGFPE); +} + +int x = 1; +int y = 0; +int z; +int nan; + +int main () +{ + signal (SIGFPE, sigfpe_handler); +/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ +#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) + signal (SIGTRAP, sigfpe_handler); +#endif +/* Linux/SPARC yields signal SIGILL. */ +#if defined (__sparc__) && defined (__linux__) + signal (SIGILL, sigfpe_handler); +#endif + + z = x / y; + nan = y / y; + exit (1); +} +], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no, + [ + # Guess based on the CPU. + case "$host_cpu" in + alpha* | i[34567]86 | m68k | s390*) + gt_cv_int_divbyzero_sigfpe="guessing yes";; + *) + gt_cv_int_divbyzero_sigfpe="guessing no";; + esac + ]) + ]) + case "$gt_cv_int_divbyzero_sigfpe" in + *yes) value=1;; + *) value=0;; + esac + AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value, + [Define if integer division by zero raises signal SIGFPE.]) +]) +# inttypes.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H if exists and doesn't clash with +# . + +AC_DEFUN([gt_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h, + [ + AC_TRY_COMPILE( + [#include +#include ], + [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no) + ]) + if test $gt_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1, + [Define if exists and doesn't clash with .]) + fi +]) +# inttypes_h.m4 serial 5 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_inttypes_h=yes, + jm_ac_cv_header_inttypes_h=no)]) + if test $jm_ac_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) +# inttypes-pri.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +# Define PRI_MACROS_BROKEN if exists and defines the PRI* +# macros to non-string values. This is the case on AIX 4.3.3. + +AC_DEFUN([gt_INTTYPES_PRI], +[ + AC_REQUIRE([gt_HEADER_INTTYPES_H]) + if test $gt_cv_header_inttypes_h = yes; then + AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken], + gt_cv_inttypes_pri_broken, + [ + AC_TRY_COMPILE([#include +#ifdef PRId32 +char *p = PRId32; +#endif +], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes) + ]) + fi + if test "$gt_cv_inttypes_pri_broken" = yes; then + AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1, + [Define if exists and defines unusable PRI* macros.]) + fi +]) +# isc-posix.m4 serial 2 (gettext-0.11.2) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. + +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN([AC_ISC_POSIX], + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) +# lcmessage.m4 serial 3 (gettext-0.11.3) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995. + +# Check whether LC_MESSAGES is available in . + +AC_DEFUN([AM_LC_MESSAGES], +[ + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, + [Define if your file defines LC_MESSAGES.]) + fi +]) +# lib-ld.m4 serial 2 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + acl_cv_prog_gnu_ld=yes +else + acl_cv_prog_gnu_ld=no +fi]) +with_gnu_ld=$acl_cv_prog_gnu_ld +]) + +dnl From libtool-1.4. Sets the variable LD. +AC_DEFUN([AC_LIB_PROG_LD], +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(acl_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) +# lib-link.m4 serial 4 (gettext-0.12) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + undefine([Name]) + undefine([NAME]) +]) + +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. If found, it +dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and +dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + LIBS="$LIBS $LIB[]NAME" + AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + undefine([Name]) + undefine([NAME]) +]) + +dnl Determine the platform dependent parameters needed to use rpath: +dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, +dnl hardcode_direct, hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + libext="$acl_cv_libext" + shlibext="$acl_cv_shlibext" + hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + hardcode_direct="$acl_cv_hardcode_direct" + hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE(rpath, + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib$1-prefix], +[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib + --without-lib$1-prefix don't search for lib$1 in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test "X$prefer_shared" = "Xyes" && test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test "X$prefer_shared" = "Xyes" && test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) +# lib-prefix.m4 serial 2 (gettext-0.12) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) +# nls.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_DEFUN([AM_NLS], +[ + AC_MSG_CHECKING([whether NLS is requested]) + dnl Default is enabled NLS + AC_ARG_ENABLE(nls, + [ --disable-nls do not use Native Language Support], + USE_NLS=$enableval, USE_NLS=yes) + AC_MSG_RESULT($USE_NLS) + AC_SUBST(USE_NLS) +]) + +AC_DEFUN([AM_MKINSTALLDIRS], +[ + dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly + dnl find the mkinstalldirs script in another subdir but $(top_srcdir). + dnl Try to locate it. + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + case "$ac_aux_dir" in + /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; + *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; + esac + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi + AC_SUBST(MKINSTALLDIRS) +]) +# po.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Checks for all prerequisites of the po subdirectory. +AC_DEFUN([AM_PO_SUBDIRS], +[ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AM_NLS])dnl + + dnl Perform the following tests also if --disable-nls has been given, + dnl because they are needed for "make dist" to work. + + dnl Search for GNU msgfmt in the PATH. + dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. + dnl The second test excludes FreeBSD msgfmt. + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + dnl Search for GNU xgettext 0.12 or newer in the PATH. + dnl The first test excludes Solaris xgettext and early GNU xgettext versions. + dnl The second test excludes FreeBSD xgettext. + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + + dnl Search for GNU msgmerge 0.11 or newer in the PATH. + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, + [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU msgfmt. + if test "$GMSGFMT" != ":"; then + dnl If it is no GNU msgfmt we define it as : so that the + dnl Makefiles still can work. + if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && + (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` + AC_MSG_RESULT( + [found $GMSGFMT program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + fi + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + AC_MSG_RESULT( + [found xgettext program is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + fi + + AC_OUTPUT_COMMANDS([ + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + GMOFILES= + UPDATEPOFILES= + DUMMYPOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done], + [# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it + # from automake. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + ]) +]) +# progtest.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1996. + +# Search path for a program which passes the given test. + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST], +[ +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + [[\\/]]* | ?:[[\\/]]*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in ifelse([$5], , $PATH, [$5]); do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) +# stdint_h.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_STDINT_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_STDINT_H], +[ + AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_stdint_h=yes, + jm_ac_cv_header_stdint_h=no)]) + if test $jm_ac_cv_header_stdint_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) +# uintmax_t.m4 serial 7 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_PREREQ(2.13) + +# Define uintmax_t to 'unsigned long' or 'unsigned long long' +# if it is not already defined in or . + +AC_DEFUN([jm_AC_TYPE_UINTMAX_T], +[ + AC_REQUIRE([jm_AC_HEADER_INTTYPES_H]) + AC_REQUIRE([jm_AC_HEADER_STDINT_H]) + if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then + AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG]) + test $ac_cv_type_unsigned_long_long = yes \ + && ac_type='unsigned long long' \ + || ac_type='unsigned long' + AC_DEFINE_UNQUOTED(uintmax_t, $ac_type, + [Define to unsigned long or unsigned long long + if and don't define.]) + else + AC_DEFINE(HAVE_UINTMAX_T, 1, + [Define if you have the 'uintmax_t' type in or .]) + fi +]) +# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40) +dnl Copyright (C) 1999-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG], +[ + AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long, + [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;], + [unsigned long long ullmax = (unsigned long long) -1; + return ull << i | ull >> i | ullmax / ull | ullmax % ull;], + ac_cv_type_unsigned_long_long=yes, + ac_cv_type_unsigned_long_long=no)]) + if test $ac_cv_type_unsigned_long_long = yes; then + AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1, + [Define if you have the unsigned long long type.]) + fi +]) + +dnl From gnulib +AC_DEFUN([BASH_FUNC_FPURGE], +[ + AC_CHECK_FUNCS_ONCE([fpurge]) + AC_CHECK_FUNCS_ONCE([__fpurge]) + AC_CHECK_DECLS([fpurge], , , [#include ]) +]) + +AC_DEFUN([BASH_FUNC_SNPRINTF], +[ + AC_CHECK_FUNCS_ONCE([snprintf]) + if test X$ac_cv_func_snprintf = Xyes; then + AC_CACHE_CHECK([for standard-conformant snprintf], [bash_cv_func_snprintf], + [AC_TRY_RUN([ +#include + +main() +{ + int n; + n = snprintf (0, 0, "%s", "0123456"); + exit(n != 7); +} +], bash_cv_func_snprintf=yes, bash_cv_func_snprintf=no, + [AC_MSG_WARN([cannot check standard snprintf if cross-compiling]) + bash_cv_func_snprintf=yes] +)]) + if test $bash_cv_func_snprintf = no; then + ac_cv_func_snprintf=no + fi + fi + if test $ac_cv_func_snprintf = no; then + AC_DEFINE(HAVE_SNPRINTF, 0, + [Define if you have a standard-conformant snprintf function.]) + fi +]) + +AC_DEFUN([BASH_FUNC_VSNPRINTF], +[ + AC_CHECK_FUNCS_ONCE([vsnprintf]) + if test X$ac_cv_func_vsnprintf = Xyes; then + AC_CACHE_CHECK([for standard-conformant vsnprintf], [bash_cv_func_vsnprintf], + [AC_TRY_RUN([ +#if HAVE_STDARG_H +#include +#else +#include +#endif +#include +#include + +static int +#if HAVE_STDARG_H +foo(const char *fmt, ...) +#else +foo(format, va_alist) + const char *format; + va_dcl +#endif +{ + va_list args; + int n; + +#if HAVE_STDARG_H + va_start(args, fmt); +#else + va_start(args); +#endif + n = vsnprintf(0, 0, fmt, args); + va_end (args); + return n; +} + +main() +{ + int n; + n = foo("%s", "0123456"); + exit(n != 7); +} +], bash_cv_func_vsnprintf=yes, bash_cv_func_vsnprintf=no, + [AC_MSG_WARN([cannot check standard vsnprintf if cross-compiling]) + bash_cv_func_vsnprintf=yes] +)]) + if test $bash_cv_func_vsnprintf = no; then + ac_cv_func_vsnprintf=no + fi + fi + if test $ac_cv_func_vsnprintf = no; then + AC_DEFINE(HAVE_VSNPRINTF, 0, + [Define if you have a standard-conformant vsnprintf function.]) + fi +]) + +AC_DEFUN(BASH_STRUCT_WEXITSTATUS_OFFSET, +[AC_MSG_CHECKING(for offset of exit status in return status from wait) +AC_CACHE_VAL(bash_cv_wexitstatus_offset, +[AC_TRY_RUN([ +#include +#include + +#include + +main(c, v) + int c; + char **v; +{ + pid_t pid, p; + int s, i, n; + + s = 0; + pid = fork(); + if (pid == 0) + exit (42); + + /* wait for the process */ + p = wait(&s); + if (p != pid) + exit (255); + + /* crack s */ + for (i = 0; i < (sizeof(s) - 8); i++) + { + n = (s >> i) & 0xff; + if (n == 42) + exit (i); + } + + exit (254); +} +], bash_cv_wexitstatus_offset=0, bash_cv_wexitstatus_offset=$?, + [AC_MSG_WARN(cannot check WEXITSTATUS offset if cross compiling -- defaulting to 0) + bash_cv_wexitstatus_offset=0] +)]) +if test "$bash_cv_wexitstatus_offset" -gt 32 ; then + AC_MSG_WARN(bad exit status from test program -- defaulting to 0) + bash_cv_wexitstatus_offset=0 +fi +AC_MSG_RESULT($bash_cv_wexitstatus_offset) +AC_DEFINE_UNQUOTED([WEXITSTATUS_OFFSET], [$bash_cv_wexitstatus_offset], [Offset of exit status in wait status word]) +]) + +AC_DEFUN([BASH_FUNC_SBRK], +[ + AC_CHECK_FUNCS_ONCE([sbrk]) + if test X$ac_cv_func_sbrk = Xyes; then + AC_CACHE_CHECK([for working sbrk], [bash_cv_func_sbrk], + [AC_TRY_RUN([ +#include +#include + +int +main(int c, char **v) +{ + void *x; + + x = sbrk (4096); + exit ((x == (void *)-1) ? 1 : 0); +} +], bash_cv_func_sbrk=yes, bash_cv_func_snprintf=sbrk, + [AC_MSG_WARN([cannot check working sbrk if cross-compiling]) + bash_cv_func_sbrk=yes] +)]) + if test $bash_cv_func_sbrk = no; then + ac_cv_func_sbrk=no + fi + fi + if test $ac_cv_func_sbrk = no; then + AC_DEFINE(HAVE_SBRK, 0, + [Define if you have a working sbrk function.]) + fi +]) + +AC_DEFUN(BASH_FUNC_FNMATCH_EQUIV_FALLBACK, +[AC_MSG_CHECKING(whether fnmatch can be used to check bracket equivalence classes) +AC_CACHE_VAL(bash_cv_fnmatch_equiv_fallback, +[AC_TRY_RUN([ +#include +#include +#include +#include +#include + +char *pattern = "[[=a=]]"; + +/* char *string = "ä"; */ +unsigned char string[4] = { '\xc3', '\xa4', '\0' }; + +int +main (int c, char **v) +{ + setlocale (LC_ALL, "de_DE.UTF-8"); + if (fnmatch (pattern, (const char *)string, 0) != FNM_NOMATCH) + exit (0); + exit (1); +} + +], bash_cv_fnmatch_equiv_fallback=yes, bash_cv_fnmatch_equiv_fallback=no, + [AC_MSG_WARN(cannot check fnmatch if cross compiling -- defaulting to no) + bash_cv_fnmatch_equiv_fallback=no] +)]) +AC_MSG_RESULT($bash_cv_fnmatch_equiv_fallback) +if test "$bash_cv_fnmatch_equiv_fallback" = "yes" ; then + bash_cv_fnmatch_equiv_value=1 +else + bash_cv_fnmatch_equiv_value=0 +fi +AC_DEFINE_UNQUOTED([FNMATCH_EQUIV_FALLBACK], [$bash_cv_fnmatch_equiv_value], [Whether fnmatch can be used for bracket equivalence classes]) +]) diff --git a/readline/readline/ansi_stdlib.h b/readline/readline/ansi_stdlib.h new file mode 100644 index 0000000000..7dc2ee0cf4 --- /dev/null +++ b/readline/readline/ansi_stdlib.h @@ -0,0 +1,54 @@ +/* ansi_stdlib.h -- An ANSI Standard stdlib.h. */ +/* A minimal stdlib.h containing extern declarations for those functions + that bash uses. */ + +/* Copyright (C) 1993 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Bash is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Bash. If not, see . +*/ + +#if !defined (_STDLIB_H_) +#define _STDLIB_H_ 1 + +/* String conversion functions. */ +extern int atoi (); + +extern double atof (); +extern double strtod (); + +/* Memory allocation functions. */ +/* Generic pointer type. */ +#ifndef PTR_T + +#if defined (__STDC__) +# define PTR_T void * +#else +# define PTR_T char * +#endif + +#endif /* PTR_T */ + +extern PTR_T malloc (); +extern PTR_T realloc (); +extern void free (); + +/* Other miscellaneous functions. */ +extern void abort (); +extern void exit (); +extern char *getenv (); +extern void qsort (); + +#endif /* _STDLIB_H */ diff --git a/readline/readline/bind.c b/readline/readline/bind.c new file mode 100644 index 0000000000..57ae10f731 --- /dev/null +++ b/readline/readline/bind.c @@ -0,0 +1,2920 @@ +/* bind.c -- key binding and startup file support for the readline library. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (__TANDEM) +# include +#endif + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include +#if defined (HAVE_SYS_FILE_H) +# include +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#include "posixstat.h" + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +/* Variables exported by this file. */ +Keymap rl_binding_keymap; + +static int _rl_skip_to_delim PARAMS((char *, int, int)); + +#if defined (USE_VARARGS) && defined (PREFER_STDARG) +static void _rl_init_file_error (const char *, ...) __attribute__((__format__ (printf, 1, 2))); +#else +static void _rl_init_file_error (); +#endif + +static rl_command_func_t *_rl_function_of_keyseq_internal PARAMS((const char *, size_t, Keymap, int *)); + +static char *_rl_read_file PARAMS((char *, size_t *)); +static int _rl_read_init_file PARAMS((const char *, int)); +static int glean_key_from_name PARAMS((char *)); + +static int find_boolean_var PARAMS((const char *)); +static int find_string_var PARAMS((const char *)); + +static const char *boolean_varname PARAMS((int)); +static const char *string_varname PARAMS((int)); + +static char *_rl_get_string_variable_value PARAMS((const char *)); +static int substring_member_of_array PARAMS((const char *, const char * const *)); + +static int _rl_get_keymap_by_name PARAMS((const char *)); +static int _rl_get_keymap_by_map PARAMS((Keymap)); + +static int currently_reading_init_file; + +/* used only in this file */ +static int _rl_prefer_visible_bell = 1; + +#define OP_EQ 1 +#define OP_NE 2 +#define OP_GT 3 +#define OP_GE 4 +#define OP_LT 5 +#define OP_LE 6 + +#define OPSTART(c) ((c) == '=' || (c) == '!' || (c) == '<' || (c) == '>') +#define CMPSTART(c) ((c) == '=' || (c) == '!') + +/* **************************************************************** */ +/* */ +/* Binding keys */ +/* */ +/* **************************************************************** */ + +/* rl_add_defun (char *name, rl_command_func_t *function, int key) + Add NAME to the list of named functions. Make FUNCTION be the function + that gets called. If KEY is not -1, then bind it. */ +int +rl_add_defun (const char *name, rl_command_func_t *function, int key) +{ + if (key != -1) + rl_bind_key (key, function); + rl_add_funmap_entry (name, function); + return 0; +} + +/* Bind KEY to FUNCTION. Returns non-zero if KEY is out of range. */ +int +rl_bind_key (int key, rl_command_func_t *function) +{ + char keyseq[3]; + int l; + + if (key < 0) + return (key); + + if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) + { + if (_rl_keymap[ESC].type == ISKMAP) + { + Keymap escmap; + + escmap = FUNCTION_TO_KEYMAP (_rl_keymap, ESC); + key = UNMETA (key); + escmap[key].type = ISFUNC; + escmap[key].function = function; + return (0); + } + return (key); + } + + /* If it's bound to a function or macro, just overwrite. Otherwise we have + to treat it as a key sequence so rl_generic_bind handles shadow keymaps + for us. If we are binding '\' make sure to escape it so it makes it + through the call to rl_translate_keyseq. */ + if (_rl_keymap[key].type != ISKMAP) + { + _rl_keymap[key].type = ISFUNC; + _rl_keymap[key].function = function; + } + else + { + l = 0; + if (key == '\\') + keyseq[l++] = '\\'; + keyseq[l++] = key; + keyseq[l] = '\0'; + rl_bind_keyseq (keyseq, function); + } + rl_binding_keymap = _rl_keymap; + return (0); +} + +/* Bind KEY to FUNCTION in MAP. Returns non-zero in case of invalid + KEY. */ +int +rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map) +{ + int result; + Keymap oldmap; + + oldmap = _rl_keymap; + _rl_keymap = map; + result = rl_bind_key (key, function); + _rl_keymap = oldmap; + return (result); +} + +/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. Right + now, this is always used to attempt to bind the arrow keys. */ +int +rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *default_func, Keymap kmap) +{ + char *keyseq; + + keyseq = rl_untranslate_keyseq ((unsigned char)key); + return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, kmap)); +} + +int +rl_bind_key_if_unbound (int key, rl_command_func_t *default_func) +{ + char *keyseq; + + keyseq = rl_untranslate_keyseq ((unsigned char)key); + return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap)); +} + +/* Make KEY do nothing in the currently selected keymap. + Returns non-zero in case of error. This is not the same as self-insert; + this makes it a dead key. */ +int +rl_unbind_key (int key) +{ + return (rl_bind_key (key, (rl_command_func_t *)NULL)); +} + +/* Make KEY do nothing in MAP. Returns non-zero in case of error. */ +int +rl_unbind_key_in_map (int key, Keymap map) +{ + return (rl_bind_key_in_map (key, (rl_command_func_t *)NULL, map)); +} + +/* Unbind all keys bound to FUNCTION in MAP. */ +int +rl_unbind_function_in_map (rl_command_func_t *func, Keymap map) +{ + register int i, rval; + + for (i = rval = 0; i < KEYMAP_SIZE; i++) + { + if (map[i].type == ISFUNC && map[i].function == func) + { + map[i].function = (rl_command_func_t *)NULL; + rval = 1; + } + } + return rval; +} + +/* Unbind all keys bound to COMMAND, which is a bindable command name, in MAP */ +int +rl_unbind_command_in_map (const char *command, Keymap map) +{ + rl_command_func_t *func; + + func = rl_named_function (command); + if (func == 0) + return 0; + return (rl_unbind_function_in_map (func, map)); +} + +/* Bind the key sequence represented by the string KEYSEQ to + FUNCTION, starting in the current keymap. This makes new + keymaps as necessary. */ +int +rl_bind_keyseq (const char *keyseq, rl_command_func_t *function) +{ + return (rl_generic_bind (ISFUNC, keyseq, (char *)function, _rl_keymap)); +} + +/* Bind the key sequence represented by the string KEYSEQ to + FUNCTION. This makes new keymaps as necessary. The initial + place to do bindings is in MAP. */ +int +rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) +{ + return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map)); +} + +/* Backwards compatibility; equivalent to rl_bind_keyseq_in_map() */ +int +rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map) +{ + return (rl_generic_bind (ISFUNC, keyseq, (char *)function, map)); +} + +/* Bind key sequence KEYSEQ to DEFAULT_FUNC if KEYSEQ is unbound. Right + now, this is always used to attempt to bind the arrow keys, hence the + check for rl_vi_movement_mode. */ +int +rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *default_func, Keymap kmap) +{ + rl_command_func_t *func; + char *keys; + int keys_len; + + if (keyseq) + { + /* Handle key sequences that require translations and `raw' ones that + don't. This might be a problem with backslashes. */ + keys = (char *)xmalloc (1 + (2 * strlen (keyseq))); + if (rl_translate_keyseq (keyseq, keys, &keys_len)) + { + xfree (keys); + return -1; + } + func = rl_function_of_keyseq_len (keys, keys_len, kmap, (int *)NULL); + xfree (keys); +#if defined (VI_MODE) + if (!func || func == rl_do_lowercase_version || func == rl_vi_movement_mode) +#else + if (!func || func == rl_do_lowercase_version) +#endif + return (rl_bind_keyseq_in_map (keyseq, default_func, kmap)); + else + return 1; + } + return 0; +} + +int +rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *default_func) +{ + return (rl_bind_keyseq_if_unbound_in_map (keyseq, default_func, _rl_keymap)); +} + +/* Bind the key sequence represented by the string KEYSEQ to + the string of characters MACRO. This makes new keymaps as + necessary. The initial place to do bindings is in MAP. */ +int +rl_macro_bind (const char *keyseq, const char *macro, Keymap map) +{ + char *macro_keys; + int macro_keys_len; + + macro_keys = (char *)xmalloc ((2 * strlen (macro)) + 1); + + if (rl_translate_keyseq (macro, macro_keys, ¯o_keys_len)) + { + xfree (macro_keys); + return -1; + } + rl_generic_bind (ISMACR, keyseq, macro_keys, map); + return 0; +} + +/* Bind the key sequence represented by the string KEYSEQ to + the arbitrary pointer DATA. TYPE says what kind of data is + pointed to by DATA, right now this can be a function (ISFUNC), + a macro (ISMACR), or a keymap (ISKMAP). This makes new keymaps + as necessary. The initial place to do bindings is in MAP. */ +int +rl_generic_bind (int type, const char *keyseq, char *data, Keymap map) +{ + char *keys; + int keys_len, prevkey; + register int i; + KEYMAP_ENTRY k; + Keymap prevmap; + + k.function = 0; + + /* If no keys to bind to, exit right away. */ + if (keyseq == 0 || *keyseq == 0) + { + if (type == ISMACR) + xfree (data); + return -1; + } + + keys = (char *)xmalloc (1 + (2 * strlen (keyseq))); + + /* Translate the ASCII representation of KEYSEQ into an array of + characters. Stuff the characters into KEYS, and the length of + KEYS into KEYS_LEN. */ + if (rl_translate_keyseq (keyseq, keys, &keys_len)) + { + xfree (keys); + return -1; + } + + prevmap = map; + prevkey = keys[0]; + + /* Bind keys, making new keymaps as necessary. */ + for (i = 0; i < keys_len; i++) + { + unsigned char uc = keys[i]; + int ic; + + if (i > 0) + prevkey = ic; + + ic = uc; + if (ic < 0 || ic >= KEYMAP_SIZE) + { + xfree (keys); + return -1; + } + + if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii) + { + ic = UNMETA (ic); + if (map[ESC].type == ISKMAP) + { + prevmap = map; + map = FUNCTION_TO_KEYMAP (map, ESC); + } + } + + if ((i + 1) < keys_len) + { + if (map[ic].type != ISKMAP) + { + /* We allow subsequences of keys. If a keymap is being + created that will `shadow' an existing function or macro + key binding, we save that keybinding into the ANYOTHERKEY + index in the new map. The dispatch code will look there + to find the function to execute if the subsequence is not + matched. ANYOTHERKEY was chosen to be greater than + UCHAR_MAX. */ + k = map[ic]; + + map[ic].type = ISKMAP; + map[ic].function = KEYMAP_TO_FUNCTION (rl_make_bare_keymap()); + } + prevmap = map; + map = FUNCTION_TO_KEYMAP (map, ic); + /* The dispatch code will return this function if no matching + key sequence is found in the keymap. This (with a little + help from the dispatch code in readline.c) allows `a' to be + mapped to something, `abc' to be mapped to something else, + and the function bound to `a' to be executed when the user + types `abx', leaving `bx' in the input queue. */ + if (k.function && ((k.type == ISFUNC && k.function != rl_do_lowercase_version) || k.type == ISMACR)) + { + map[ANYOTHERKEY] = k; + k.function = 0; + } + } + else + { + if (map[ic].type == ISMACR) + xfree ((char *)map[ic].function); + else if (map[ic].type == ISKMAP) + { + prevmap = map; + map = FUNCTION_TO_KEYMAP (map, ic); + ic = ANYOTHERKEY; + /* If we're trying to override a keymap with a null function + (e.g., trying to unbind it), we can't use a null pointer + here because that's indistinguishable from having not been + overridden. We use a special bindable function that does + nothing. */ + if (type == ISFUNC && data == 0) + data = (char *)_rl_null_function; + } + + map[ic].function = KEYMAP_TO_FUNCTION (data); + map[ic].type = type; + } + + rl_binding_keymap = map; + + } + + /* If we unbound a key (type == ISFUNC, data == 0), and the prev keymap + points to the keymap where we unbound the key (sanity check), and the + current binding keymap is empty (rl_empty_keymap() returns non-zero), + and the binding keymap has ANYOTHERKEY set with type == ISFUNC + (overridden function), delete the now-empty keymap, take the previously- + overridden function and remove the override. */ + /* Right now, this only works one level back. */ + if (type == ISFUNC && data == 0 && + prevmap[prevkey].type == ISKMAP && + (FUNCTION_TO_KEYMAP(prevmap, prevkey) == rl_binding_keymap) && + rl_binding_keymap[ANYOTHERKEY].type == ISFUNC && + rl_empty_keymap (rl_binding_keymap)) + { + prevmap[prevkey].type = rl_binding_keymap[ANYOTHERKEY].type; + prevmap[prevkey].function = rl_binding_keymap[ANYOTHERKEY].function; + rl_discard_keymap (rl_binding_keymap); + rl_binding_keymap = prevmap; + } + + xfree (keys); + return 0; +} + +/* Translate the ASCII representation of SEQ, stuffing the values into ARRAY, + an array of characters. LEN gets the final length of ARRAY. Return + non-zero if there was an error parsing SEQ. */ +int +rl_translate_keyseq (const char *seq, char *array, int *len) +{ + register int i, c, l, temp; + + for (i = l = 0; c = seq[i]; i++) + { + if (c == '\\') + { + c = seq[++i]; + + if (c == 0) + { + array[l++] = '\\'; /* preserve trailing backslash */ + break; + } + + /* Handle \C- and \M- prefixes. */ + if ((c == 'C' || c == 'M') && seq[i + 1] == '-') + { + /* Handle special case of backwards define. */ + if (strncmp (&seq[i], "C-\\M-", 5) == 0) + { + array[l++] = ESC; /* ESC is meta-prefix */ + i += 5; + array[l++] = CTRL (_rl_to_upper (seq[i])); + } + else if (c == 'M') + { + i++; /* seq[i] == '-' */ + /* XXX - obey convert-meta setting */ + if (_rl_convert_meta_chars_to_ascii && _rl_keymap[ESC].type == ISKMAP) + array[l++] = ESC; /* ESC is meta-prefix */ + else if (seq[i+1] == '\\' && seq[i+2] == 'C' && seq[i+3] == '-') + { + i += 4; + temp = (seq[i] == '?') ? RUBOUT : CTRL (_rl_to_upper (seq[i])); + array[l++] = META (temp); + } + else + { + /* This doesn't yet handle things like \M-\a, which may + or may not have any reasonable meaning. You're + probably better off using straight octal or hex. */ + i++; + array[l++] = META (seq[i]); + } + } + else if (c == 'C') + { + i += 2; + /* Special hack for C-?... */ + array[l++] = (seq[i] == '?') ? RUBOUT : CTRL (_rl_to_upper (seq[i])); + } + if (seq[i] == '\0') + break; + continue; + } + + /* Translate other backslash-escaped characters. These are the + same escape sequences that bash's `echo' and `printf' builtins + handle, with the addition of \d -> RUBOUT. A backslash + preceding a character that is not special is stripped. */ + switch (c) + { + case 'a': + array[l++] = '\007'; + break; + case 'b': + array[l++] = '\b'; + break; + case 'd': + array[l++] = RUBOUT; /* readline-specific */ + break; + case 'e': + array[l++] = ESC; + break; + case 'f': + array[l++] = '\f'; + break; + case 'n': + array[l++] = NEWLINE; + break; + case 'r': + array[l++] = RETURN; + break; + case 't': + array[l++] = TAB; + break; + case 'v': + array[l++] = 0x0B; + break; + case '\\': + array[l++] = '\\'; + break; + case '0': case '1': case '2': case '3': + case '4': case '5': case '6': case '7': + i++; + for (temp = 2, c -= '0'; ISOCTAL ((unsigned char)seq[i]) && temp--; i++) + c = (c * 8) + OCTVALUE (seq[i]); + i--; /* auto-increment in for loop */ + array[l++] = c & largest_char; + break; + case 'x': + i++; + for (temp = 2, c = 0; ISXDIGIT ((unsigned char)seq[i]) && temp--; i++) + c = (c * 16) + HEXVALUE (seq[i]); + if (temp == 2) + c = 'x'; + i--; /* auto-increment in for loop */ + array[l++] = c & largest_char; + break; + default: /* backslashes before non-special chars just add the char */ + array[l++] = c; + break; /* the backslash is stripped */ + } + continue; + } + + array[l++] = c; + } + + *len = l; + array[l] = '\0'; + return (0); +} + +static int +_rl_isescape (int c) +{ + switch (c) + { + case '\007': + case '\b': + case '\f': + case '\n': + case '\r': + case TAB: + case 0x0b: return (1); + default: return (0); + } +} + +static int +_rl_escchar (int c) +{ + switch (c) + { + case '\007': return ('a'); + case '\b': return ('b'); + case '\f': return ('f'); + case '\n': return ('n'); + case '\r': return ('r'); + case TAB: return ('t'); + case 0x0b: return ('v'); + default: return (c); + } +} + +char * +rl_untranslate_keyseq (int seq) +{ + static char kseq[16]; + int i, c; + + i = 0; + c = seq; + if (META_CHAR (c)) + { + kseq[i++] = '\\'; + kseq[i++] = 'M'; + kseq[i++] = '-'; + c = UNMETA (c); + } + else if (c == ESC) + { + kseq[i++] = '\\'; + c = 'e'; + } + else if (CTRL_CHAR (c)) + { + kseq[i++] = '\\'; + kseq[i++] = 'C'; + kseq[i++] = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + else if (c == RUBOUT) + { + kseq[i++] = '\\'; + kseq[i++] = 'C'; + kseq[i++] = '-'; + c = '?'; + } + + if (c == ESC) + { + kseq[i++] = '\\'; + c = 'e'; + } + else if (c == '\\' || c == '"') + { + kseq[i++] = '\\'; + } + + kseq[i++] = (unsigned char) c; + kseq[i] = '\0'; + return kseq; +} + +char * +_rl_untranslate_macro_value (char *seq, int use_escapes) +{ + char *ret, *r, *s; + int c; + + r = ret = (char *)xmalloc (7 * strlen (seq) + 1); + for (s = seq; *s; s++) + { + c = *s; + if (META_CHAR (c)) + { + *r++ = '\\'; + *r++ = 'M'; + *r++ = '-'; + c = UNMETA (c); + } + else if (c == ESC) + { + *r++ = '\\'; + c = 'e'; + } + else if (CTRL_CHAR (c)) + { + *r++ = '\\'; + if (use_escapes && _rl_isescape (c)) + c = _rl_escchar (c); + else + { + *r++ = 'C'; + *r++ = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + } + else if (c == RUBOUT) + { + *r++ = '\\'; + *r++ = 'C'; + *r++ = '-'; + c = '?'; + } + + if (c == ESC) + { + *r++ = '\\'; + c = 'e'; + } + else if (c == '\\' || c == '"') + *r++ = '\\'; + + *r++ = (unsigned char)c; + } + *r = '\0'; + return ret; +} + +/* Return a pointer to the function that STRING represents. + If STRING doesn't have a matching function, then a NULL pointer + is returned. */ +rl_command_func_t * +rl_named_function (const char *string) +{ + register int i; + + rl_initialize_funmap (); + + for (i = 0; funmap[i]; i++) + if (_rl_stricmp (funmap[i]->name, string) == 0) + return (funmap[i]->function); + return ((rl_command_func_t *)NULL); +} + +/* Return the function (or macro) definition which would be invoked via + KEYSEQ if executed in MAP. If MAP is NULL, then the current keymap is + used. TYPE, if non-NULL, is a pointer to an int which will receive the + type of the object pointed to. One of ISFUNC (function), ISKMAP (keymap), + or ISMACR (macro). */ +static rl_command_func_t * +_rl_function_of_keyseq_internal (const char *keyseq, size_t len, Keymap map, int *type) +{ + register int i; + + if (map == 0) + map = _rl_keymap; + + for (i = 0; keyseq && i < len; i++) + { + unsigned char ic = keyseq[i]; + + if (META_CHAR (ic) && _rl_convert_meta_chars_to_ascii) + { + if (map[ESC].type == ISKMAP) + { + map = FUNCTION_TO_KEYMAP (map, ESC); + ic = UNMETA (ic); + } + /* XXX - should we just return NULL here, since this obviously + doesn't match? */ + else + { + if (type) + *type = map[ESC].type; + + return (map[ESC].function); + } + } + + if (map[ic].type == ISKMAP) + { + /* If this is the last key in the key sequence, return the + map. */ + if (keyseq[i + 1] == '\0') + { + if (type) + *type = ISKMAP; + + return (map[ic].function); + } + else + map = FUNCTION_TO_KEYMAP (map, ic); + } + /* If we're not at the end of the key sequence, and the current key + is bound to something other than a keymap, then the entire key + sequence is not bound. */ + else if (map[ic].type != ISKMAP && keyseq[i+1]) + return ((rl_command_func_t *)NULL); + else /* map[ic].type != ISKMAP && keyseq[i+1] == 0 */ + { + if (type) + *type = map[ic].type; + + return (map[ic].function); + } + } + return ((rl_command_func_t *) NULL); +} + +rl_command_func_t * +rl_function_of_keyseq (const char *keyseq, Keymap map, int *type) +{ + return _rl_function_of_keyseq_internal (keyseq, strlen (keyseq), map, type); +} + +rl_command_func_t * +rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) +{ + return _rl_function_of_keyseq_internal (keyseq, len, map, type); +} + +/* The last key bindings file read. */ +static char *last_readline_init_file = (char *)NULL; + +/* The file we're currently reading key bindings from. */ +static const char *current_readline_init_file; +static int current_readline_init_include_level; +static int current_readline_init_lineno; + +/* Read FILENAME into a locally-allocated buffer and return the buffer. + The size of the buffer is returned in *SIZEP. Returns NULL if any + errors were encountered. */ +static char * +_rl_read_file (char *filename, size_t *sizep) +{ + struct stat finfo; + size_t file_size; + char *buffer; + int i, file; + + file = -1; + if (((file = open (filename, O_RDONLY, 0666)) < 0) || (fstat (file, &finfo) < 0)) + { + if (file >= 0) + close (file); + return ((char *)NULL); + } + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { + if (file >= 0) + close (file); +#if defined (EFBIG) + errno = EFBIG; +#endif + return ((char *)NULL); + } + + /* Read the file into BUFFER. */ + buffer = (char *)xmalloc (file_size + 1); + i = read (file, buffer, file_size); + close (file); + + if (i < 0) + { + xfree (buffer); + return ((char *)NULL); + } + + RL_CHECK_SIGNALS (); + + buffer[i] = '\0'; + if (sizep) + *sizep = i; + + return (buffer); +} + +/* Re-read the current keybindings file. */ +int +rl_re_read_init_file (int count, int ignore) +{ + int r; + r = rl_read_init_file ((const char *)NULL); + rl_set_keymap_from_edit_mode (); + return r; +} + +/* Do key bindings from a file. If FILENAME is NULL it defaults + to the first non-null filename from this list: + 1. the filename used for the previous call + 2. the value of the shell variable `INPUTRC' + 3. ~/.inputrc + 4. /etc/inputrc + If the file existed and could be opened and read, 0 is returned, + otherwise errno is returned. */ +int +rl_read_init_file (const char *filename) +{ + /* Default the filename. */ + if (filename == 0) + filename = last_readline_init_file; + if (filename == 0) + filename = sh_get_env_value ("INPUTRC"); + if (filename == 0 || *filename == 0) + { + filename = DEFAULT_INPUTRC; + /* Try to read DEFAULT_INPUTRC; fall back to SYS_INPUTRC on failure */ + if (_rl_read_init_file (filename, 0) == 0) + return 0; + filename = SYS_INPUTRC; + } + +#if defined (__MSDOS__) + if (_rl_read_init_file (filename, 0) == 0) + return 0; + filename = "~/_inputrc"; +#endif + return (_rl_read_init_file (filename, 0)); +} + +static int +_rl_read_init_file (const char *filename, int include_level) +{ + register int i; + char *buffer, *openname, *line, *end; + size_t file_size; + + current_readline_init_file = filename; + current_readline_init_include_level = include_level; + + openname = tilde_expand (filename); + buffer = _rl_read_file (openname, &file_size); + xfree (openname); + + RL_CHECK_SIGNALS (); + if (buffer == 0) + return (errno); + + if (include_level == 0 && filename != last_readline_init_file) + { + FREE (last_readline_init_file); + last_readline_init_file = savestring (filename); + } + + currently_reading_init_file = 1; + + /* Loop over the lines in the file. Lines that start with `#' are + comments; all other lines are commands for readline initialization. */ + current_readline_init_lineno = 1; + line = buffer; + end = buffer + file_size; + while (line < end) + { + /* Find the end of this line. */ + for (i = 0; line + i != end && line[i] != '\n'; i++); + +#if defined (__CYGWIN__) + /* ``Be liberal in what you accept.'' */ + if (line[i] == '\n' && line[i-1] == '\r') + line[i - 1] = '\0'; +#endif + + /* Mark end of line. */ + line[i] = '\0'; + + /* Skip leading whitespace. */ + while (*line && whitespace (*line)) + { + line++; + i--; + } + + /* If the line is not a comment, then parse it. */ + if (*line && *line != '#') + rl_parse_and_bind (line); + + /* Move to the next line. */ + line += i + 1; + current_readline_init_lineno++; + } + + xfree (buffer); + currently_reading_init_file = 0; + return (0); +} + +static void +#if defined (PREFER_STDARG) +_rl_init_file_error (const char *format, ...) +#else +_rl_init_file_error (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + fprintf (stderr, "readline: "); + if (currently_reading_init_file) + fprintf (stderr, "%s: line %d: ", current_readline_init_file, + current_readline_init_lineno); + + vfprintf (stderr, format, args); + fprintf (stderr, "\n"); + fflush (stderr); + + va_end (args); +} + +/* **************************************************************** */ +/* */ +/* Parser Helper Functions */ +/* */ +/* **************************************************************** */ + +static int +parse_comparison_op (s, indp) + const char *s; + int *indp; +{ + int i, peekc, op; + + if (OPSTART (s[*indp]) == 0) + return -1; + i = *indp; + peekc = s[i] ? s[i+1] : 0; + op = -1; + + if (s[i] == '=') + { + op = OP_EQ; + if (peekc == '=') + i++; + i++; + } + else if (s[i] == '!' && peekc == '=') + { + op = OP_NE; + i += 2; + } + else if (s[i] == '<' && peekc == '=') + { + op = OP_LE; + i += 2; + } + else if (s[i] == '>' && peekc == '=') + { + op = OP_GE; + i += 2; + } + else if (s[i] == '<') + { + op = OP_LT; + i += 1; + } + else if (s[i] == '>') + { + op = OP_GT; + i += 1; + } + + *indp = i; + return op; +} + +/* **************************************************************** */ +/* */ +/* Parser Directives */ +/* */ +/* **************************************************************** */ + +typedef int _rl_parser_func_t PARAMS((char *)); + +/* Things that mean `Control'. */ +const char * const _rl_possible_control_prefixes[] = { + "Control-", "C-", "CTRL-", (const char *)NULL +}; + +const char * const _rl_possible_meta_prefixes[] = { + "Meta", "M-", (const char *)NULL +}; + +/* Conditionals. */ + +/* Calling programs set this to have their argv[0]. */ +const char *rl_readline_name = "other"; + +/* Stack of previous values of parsing_conditionalized_out. */ +static unsigned char *if_stack = (unsigned char *)NULL; +static int if_stack_depth; +static int if_stack_size; + +/* Push _rl_parsing_conditionalized_out, and set parser state based + on ARGS. */ +static int +parser_if (char *args) +{ + int i, llen, boolvar, strvar; + + boolvar = strvar = -1; + + /* Push parser state. */ + if (if_stack_depth + 1 >= if_stack_size) + { + if (!if_stack) + if_stack = (unsigned char *)xmalloc (if_stack_size = 20); + else + if_stack = (unsigned char *)xrealloc (if_stack, if_stack_size += 20); + } + if_stack[if_stack_depth++] = _rl_parsing_conditionalized_out; + + /* If parsing is turned off, then nothing can turn it back on except + for finding the matching endif. In that case, return right now. */ + if (_rl_parsing_conditionalized_out) + return 0; + + llen = strlen (args); + + /* Isolate first argument. */ + for (i = 0; args[i] && !whitespace (args[i]); i++); + + if (args[i]) + args[i++] = '\0'; + + /* Handle "$if term=foo" and "$if mode=emacs" constructs. If this + isn't term=foo, or mode=emacs, then check to see if the first + word in ARGS is the same as the value stored in rl_readline_name. */ + if (rl_terminal_name && _rl_strnicmp (args, "term=", 5) == 0) + { + char *tem, *tname; + + /* Terminals like "aaa-60" are equivalent to "aaa". */ + tname = savestring (rl_terminal_name); + tem = strchr (tname, '-'); + if (tem) + *tem = '\0'; + + /* Test the `long' and `short' forms of the terminal name so that + if someone has a `sun-cmd' and does not want to have bindings + that will be executed if the terminal is a `sun', they can put + `$if term=sun-cmd' into their .inputrc. */ + _rl_parsing_conditionalized_out = _rl_stricmp (args + 5, tname) && + _rl_stricmp (args + 5, rl_terminal_name); + xfree (tname); + } +#if defined (VI_MODE) + else if (_rl_strnicmp (args, "mode=", 5) == 0) + { + int mode; + + if (_rl_stricmp (args + 5, "emacs") == 0) + mode = emacs_mode; + else if (_rl_stricmp (args + 5, "vi") == 0) + mode = vi_mode; + else + mode = no_mode; + + _rl_parsing_conditionalized_out = mode != rl_editing_mode; + } +#endif /* VI_MODE */ + else if (_rl_strnicmp (args, "version", 7) == 0) + { + int rlversion, versionarg, op, previ, major, minor; + + _rl_parsing_conditionalized_out = 1; + rlversion = RL_VERSION_MAJOR*10 + RL_VERSION_MINOR; + /* if "version" is separated from the operator by whitespace, or the + operand is separated from the operator by whitespace, restore it. + We're more liberal with allowed whitespace for this variable. */ + if (i > 0 && i <= llen && args[i-1] == '\0') + args[i-1] = ' '; + args[llen] = '\0'; /* just in case */ + for (i = 7; whitespace (args[i]); i++) + ; + if (OPSTART(args[i]) == 0) + { + _rl_init_file_error ("comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line"); + return 0; + } + previ = i; + op = parse_comparison_op (args, &i); + if (op <= 0) + { + _rl_init_file_error ("comparison operator expected, found `%s'", args+previ); + return 0; + } + for ( ; args[i] && whitespace (args[i]); i++) + ; + if (args[i] == 0 || _rl_digit_p (args[i]) == 0) + { + _rl_init_file_error ("numeric argument expected, found `%s'", args+i); + return 0; + } + major = minor = 0; + previ = i; + for ( ; args[i] && _rl_digit_p (args[i]); i++) + major = major*10 + _rl_digit_value (args[i]); + if (args[i] == '.') + { + if (args[i + 1] && _rl_digit_p (args [i + 1]) == 0) + { + _rl_init_file_error ("numeric argument expected, found `%s'", args+previ); + return 0; + } + for (++i; args[i] && _rl_digit_p (args[i]); i++) + minor = minor*10 + _rl_digit_value (args[i]); + } + /* optional - check for trailing garbage on the line, allow whitespace + and a trailing comment */ + previ = i; + for ( ; args[i] && whitespace (args[i]); i++) + ; + if (args[i] && args[i] != '#') + { + _rl_init_file_error ("trailing garbage on line: `%s'", args+previ); + return 0; + } + versionarg = major*10 + minor; + + switch (op) + { + case OP_EQ: + _rl_parsing_conditionalized_out = rlversion == versionarg; + break; + case OP_NE: + _rl_parsing_conditionalized_out = rlversion != versionarg; + break; + case OP_GT: + _rl_parsing_conditionalized_out = rlversion > versionarg; + break; + case OP_GE: + _rl_parsing_conditionalized_out = rlversion >= versionarg; + break; + case OP_LT: + _rl_parsing_conditionalized_out = rlversion < versionarg; + break; + case OP_LE: + _rl_parsing_conditionalized_out = rlversion <= versionarg; + break; + } + } + /* Check to see if the first word in ARGS is the same as the + value stored in rl_readline_name. */ + else if (_rl_stricmp (args, rl_readline_name) == 0) + _rl_parsing_conditionalized_out = 0; + else if ((boolvar = find_boolean_var (args)) >= 0 || (strvar = find_string_var (args)) >= 0) + { + int op, previ; + size_t vlen; + const char *vname; + char *valuearg, *vval, prevc; + + _rl_parsing_conditionalized_out = 1; + vname = (boolvar >= 0) ? boolean_varname (boolvar) : string_varname (strvar); + vlen = strlen (vname); + if (i > 0 && i <= llen && args[i-1] == '\0') + args[i-1] = ' '; + args[llen] = '\0'; /* just in case */ + for (i = vlen; whitespace (args[i]); i++) + ; + if (CMPSTART(args[i]) == 0) + { + _rl_init_file_error ("equality comparison operator expected, found `%s'", args[i] ? args + i : "end-of-line"); + return 0; + } + previ = i; + op = parse_comparison_op (args, &i); + if (op != OP_EQ && op != OP_NE) + { + _rl_init_file_error ("equality comparison operator expected, found `%s'", args+previ); + return 0; + } + for ( ; args[i] && whitespace (args[i]); i++) + ; + if (args[i] == 0) + { + _rl_init_file_error ("argument expected, found `%s'", args+i); + return 0; + } + previ = i; + valuearg = args + i; + for ( ; args[i] && whitespace (args[i]) == 0; i++) + ; + prevc = args[i]; + args[i] = '\0'; /* null-terminate valuearg */ + vval = rl_variable_value (vname); + if (op == OP_EQ) + _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) != 0; + else if (op == OP_NE) + _rl_parsing_conditionalized_out = _rl_stricmp (vval, valuearg) == 0; + args[i] = prevc; + } + else + _rl_parsing_conditionalized_out = 1; + return 0; +} + +/* Invert the current parser state if there is anything on the stack. */ +static int +parser_else (char *args) +{ + register int i; + + if (if_stack_depth == 0) + { + _rl_init_file_error ("$else found without matching $if"); + return 0; + } + +#if 0 + /* Check the previous (n - 1) levels of the stack to make sure that + we haven't previously turned off parsing. */ + for (i = 0; i < if_stack_depth - 1; i++) +#else + /* Check the previous (n) levels of the stack to make sure that + we haven't previously turned off parsing. */ + for (i = 0; i < if_stack_depth; i++) +#endif + if (if_stack[i] == 1) + return 0; + + /* Invert the state of parsing if at top level. */ + _rl_parsing_conditionalized_out = !_rl_parsing_conditionalized_out; + return 0; +} + +/* Terminate a conditional, popping the value of + _rl_parsing_conditionalized_out from the stack. */ +static int +parser_endif (char *args) +{ + if (if_stack_depth) + _rl_parsing_conditionalized_out = if_stack[--if_stack_depth]; + else + _rl_init_file_error ("$endif without matching $if"); + return 0; +} + +static int +parser_include (char *args) +{ + const char *old_init_file; + char *e; + int old_line_number, old_include_level, r; + + if (_rl_parsing_conditionalized_out) + return (0); + + old_init_file = current_readline_init_file; + old_line_number = current_readline_init_lineno; + old_include_level = current_readline_init_include_level; + + e = strchr (args, '\n'); + if (e) + *e = '\0'; + r = _rl_read_init_file ((const char *)args, old_include_level + 1); + + current_readline_init_file = old_init_file; + current_readline_init_lineno = old_line_number; + current_readline_init_include_level = old_include_level; + + return r; +} + +/* Associate textual names with actual functions. */ +static const struct { + const char * const name; + _rl_parser_func_t *function; +} parser_directives [] = { + { "if", parser_if }, + { "endif", parser_endif }, + { "else", parser_else }, + { "include", parser_include }, + { (char *)0x0, (_rl_parser_func_t *)0x0 } +}; + +/* Handle a parser directive. STATEMENT is the line of the directive + without any leading `$'. */ +static int +handle_parser_directive (char *statement) +{ + register int i; + char *directive, *args; + + /* Isolate the actual directive. */ + + /* Skip whitespace. */ + for (i = 0; whitespace (statement[i]); i++); + + directive = &statement[i]; + + for (; statement[i] && !whitespace (statement[i]); i++); + + if (statement[i]) + statement[i++] = '\0'; + + for (; statement[i] && whitespace (statement[i]); i++); + + args = &statement[i]; + + /* Lookup the command, and act on it. */ + for (i = 0; parser_directives[i].name; i++) + if (_rl_stricmp (directive, parser_directives[i].name) == 0) + { + (*parser_directives[i].function) (args); + return (0); + } + + /* display an error message about the unknown parser directive */ + _rl_init_file_error ("%s: unknown parser directive", directive); + return (1); +} + +/* Start at STRING[START] and look for DELIM. Return I where STRING[I] == + DELIM or STRING[I] == 0. DELIM is usually a double quote. */ +static int +_rl_skip_to_delim (char *string, int start, int delim) +{ + int i, c, passc; + + for (i = start,passc = 0; c = string[i]; i++) + { + if (passc) + { + passc = 0; + if (c == 0) + break; + continue; + } + + if (c == '\\') + { + passc = 1; + continue; + } + + if (c == delim) + break; + } + + return i; +} + +/* Read the binding command from STRING and perform it. + A key binding command looks like: Keyname: function-name\0, + a variable binding command looks like: set variable value. + A new-style keybinding looks like "\C-x\C-x": exchange-point-and-mark. */ +int +rl_parse_and_bind (char *string) +{ + char *funname, *kname; + register int c, i; + int key, equivalency, foundmod, foundsep; + + while (string && whitespace (*string)) + string++; + + if (string == 0 || *string == 0 || *string == '#') + return 0; + + /* If this is a parser directive, act on it. */ + if (*string == '$') + { + handle_parser_directive (&string[1]); + return 0; + } + + /* If we aren't supposed to be parsing right now, then we're done. */ + if (_rl_parsing_conditionalized_out) + return 0; + + i = 0; + /* If this keyname is a complex key expression surrounded by quotes, + advance to after the matching close quote. This code allows the + backslash to quote characters in the key expression. */ + if (*string == '"') + { + i = _rl_skip_to_delim (string, 1, '"'); + + /* If we didn't find a closing quote, abort the line. */ + if (string[i] == '\0') + { + _rl_init_file_error ("%s: no closing `\"' in key binding", string); + return 1; + } + else + i++; /* skip past closing double quote */ + } + + /* Advance to the colon (:) or whitespace which separates the two objects. */ + for (; (c = string[i]) && c != ':' && c != ' ' && c != '\t'; i++ ); + + if (i == 0) + { + _rl_init_file_error ("`%s': invalid key binding: missing key sequence", string); + return 1; + } + + equivalency = (c == ':' && string[i + 1] == '='); + + foundsep = c != 0; + + /* Mark the end of the command (or keyname). */ + if (string[i]) + string[i++] = '\0'; + + /* If doing assignment, skip the '=' sign as well. */ + if (equivalency) + string[i++] = '\0'; + + /* If this is a command to set a variable, then do that. */ + if (_rl_stricmp (string, "set") == 0) + { + char *var, *value, *e; + int s; + + var = string + i; + /* Make VAR point to start of variable name. */ + while (*var && whitespace (*var)) var++; + + /* Make VALUE point to start of value string. */ + value = var; + while (*value && whitespace (*value) == 0) value++; + if (*value) + *value++ = '\0'; + while (*value && whitespace (*value)) value++; + + /* Strip trailing whitespace from values of boolean variables. */ + if (find_boolean_var (var) >= 0) + { + /* remove trailing whitespace */ +remove_trailing: + e = value + strlen (value) - 1; + while (e >= value && whitespace (*e)) + e--; + e++; /* skip back to whitespace or EOS */ + + if (*e && e >= value) + *e = '\0'; + } + else if ((i = find_string_var (var)) >= 0) + { + /* Allow quoted strings in variable values */ + if (*value == '"') + { + i = _rl_skip_to_delim (value, 1, *value); + value[i] = '\0'; + value++; /* skip past the quote */ + } + else + goto remove_trailing; + } + + rl_variable_bind (var, value); + return 0; + } + + /* Skip any whitespace between keyname and funname. */ + for (; string[i] && whitespace (string[i]); i++); + funname = &string[i]; + + /* Now isolate funname. + For straight function names just look for whitespace, since + that will signify the end of the string. But this could be a + macro definition. In that case, the string is quoted, so skip + to the matching delimiter. We allow the backslash to quote the + delimiter characters in the macro body. */ + /* This code exists to allow whitespace in macro expansions, which + would otherwise be gobbled up by the next `for' loop.*/ + /* XXX - it may be desirable to allow backslash quoting only if " is + the quoted string delimiter, like the shell. */ + if (*funname == '\'' || *funname == '"') + { + i = _rl_skip_to_delim (string, i+1, *funname); + if (string[i]) + i++; + else + { + _rl_init_file_error ("`%s': missing closing quote for macro", funname); + return 1; + } + } + + /* Advance to the end of the string. */ + for (; string[i] && whitespace (string[i]) == 0; i++); + + /* No extra whitespace at the end of the string. */ + string[i] = '\0'; + + /* Handle equivalency bindings here. Make the left-hand side be exactly + whatever the right-hand evaluates to, including keymaps. */ + if (equivalency) + { + return 0; + } + + if (foundsep == 0) + { + _rl_init_file_error ("%s: no key sequence terminator", string); + return 1; + } + + /* If this is a new-style key-binding, then do the binding with + rl_bind_keyseq (). Otherwise, let the older code deal with it. */ + if (*string == '"') + { + char *seq; + register int j, k, passc; + + seq = (char *)xmalloc (1 + strlen (string)); + for (j = 1, k = passc = 0; string[j]; j++) + { + /* Allow backslash to quote characters, but leave them in place. + This allows a string to end with a backslash quoting another + backslash, or with a backslash quoting a double quote. The + backslashes are left in place for rl_translate_keyseq (). */ + if (passc || (string[j] == '\\')) + { + seq[k++] = string[j]; + passc = !passc; + continue; + } + + if (string[j] == '"') + break; + + seq[k++] = string[j]; + } + seq[k] = '\0'; + + /* Binding macro? */ + if (*funname == '\'' || *funname == '"') + { + j = strlen (funname); + + /* Remove the delimiting quotes from each end of FUNNAME. */ + if (j && funname[j - 1] == *funname) + funname[j - 1] = '\0'; + + rl_macro_bind (seq, &funname[1], _rl_keymap); + } + else + rl_bind_keyseq (seq, rl_named_function (funname)); + + xfree (seq); + return 0; + } + + /* Get the actual character we want to deal with. */ + kname = strrchr (string, '-'); + if (kname == 0) + kname = string; + else + kname++; + + key = glean_key_from_name (kname); + + /* Add in control and meta bits. */ + foundmod = 0; + if (substring_member_of_array (string, _rl_possible_control_prefixes)) + { + key = CTRL (_rl_to_upper (key)); + foundmod = 1; + } + + if (substring_member_of_array (string, _rl_possible_meta_prefixes)) + { + key = META (key); + foundmod = 1; + } + + if (foundmod == 0 && kname != string) + { + _rl_init_file_error ("%s: unknown key modifier", string); + return 1; + } + + /* Temporary. Handle old-style keyname with macro-binding. */ + if (*funname == '\'' || *funname == '"') + { + char useq[2]; + int fl = strlen (funname); + + useq[0] = key; useq[1] = '\0'; + if (fl && funname[fl - 1] == *funname) + funname[fl - 1] = '\0'; + + rl_macro_bind (useq, &funname[1], _rl_keymap); + } +#if defined (PREFIX_META_HACK) + /* Ugly, but working hack to keep prefix-meta around. */ + else if (_rl_stricmp (funname, "prefix-meta") == 0) + { + char seq[2]; + + seq[0] = key; + seq[1] = '\0'; + rl_generic_bind (ISKMAP, seq, (char *)emacs_meta_keymap, _rl_keymap); + } +#endif /* PREFIX_META_HACK */ + else + rl_bind_key (key, rl_named_function (funname)); + + return 0; +} + +/* Simple structure for boolean readline variables (i.e., those that can + have one of two values; either "On" or 1 for truth, or "Off" or 0 for + false. */ + +#define V_SPECIAL 0x1 + +static const struct { + const char * const name; + int *value; + int flags; +} boolean_varlist [] = { + { "bind-tty-special-chars", &_rl_bind_stty_chars, 0 }, + { "blink-matching-paren", &rl_blink_matching_paren, V_SPECIAL }, + { "byte-oriented", &rl_byte_oriented, 0 }, +#if defined (COLOR_SUPPORT) + { "colored-completion-prefix",&_rl_colored_completion_prefix, 0 }, + { "colored-stats", &_rl_colored_stats, 0 }, +#endif + { "completion-ignore-case", &_rl_completion_case_fold, 0 }, + { "completion-map-case", &_rl_completion_case_map, 0 }, + { "convert-meta", &_rl_convert_meta_chars_to_ascii, 0 }, + { "disable-completion", &rl_inhibit_completion, 0 }, + { "echo-control-characters", &_rl_echo_control_chars, 0 }, + { "enable-bracketed-paste", &_rl_enable_bracketed_paste, 0 }, + { "enable-keypad", &_rl_enable_keypad, 0 }, + { "enable-meta-key", &_rl_enable_meta, 0 }, + { "expand-tilde", &rl_complete_with_tilde_expansion, 0 }, + { "history-preserve-point", &_rl_history_preserve_point, 0 }, + { "horizontal-scroll-mode", &_rl_horizontal_scroll_mode, 0 }, + { "input-meta", &_rl_meta_flag, 0 }, + { "mark-directories", &_rl_complete_mark_directories, 0 }, + { "mark-modified-lines", &_rl_mark_modified_lines, 0 }, + { "mark-symlinked-directories", &_rl_complete_mark_symlink_dirs, 0 }, + { "match-hidden-files", &_rl_match_hidden_files, 0 }, + { "menu-complete-display-prefix", &_rl_menu_complete_prefix_first, 0 }, + { "meta-flag", &_rl_meta_flag, 0 }, + { "output-meta", &_rl_output_meta_chars, 0 }, + { "page-completions", &_rl_page_completions, 0 }, + { "prefer-visible-bell", &_rl_prefer_visible_bell, V_SPECIAL }, + { "print-completions-horizontally", &_rl_print_completions_horizontally, 0 }, + { "revert-all-at-newline", &_rl_revert_all_at_newline, 0 }, + { "show-all-if-ambiguous", &_rl_complete_show_all, 0 }, + { "show-all-if-unmodified", &_rl_complete_show_unmodified, 0 }, + { "show-mode-in-prompt", &_rl_show_mode_in_prompt, 0 }, + { "skip-completed-text", &_rl_skip_completed_text, 0 }, +#if defined (VISIBLE_STATS) + { "visible-stats", &rl_visible_stats, 0 }, +#endif /* VISIBLE_STATS */ + { (char *)NULL, (int *)NULL, 0 } +}; + +static int +find_boolean_var (const char *name) +{ + register int i; + + for (i = 0; boolean_varlist[i].name; i++) + if (_rl_stricmp (name, boolean_varlist[i].name) == 0) + return i; + return -1; +} + +static const char * +boolean_varname (int i) +{ + return ((i >= 0) ? boolean_varlist[i].name : (char *)NULL); +} + +/* Hooks for handling special boolean variables, where a + function needs to be called or another variable needs + to be changed when they're changed. */ +static void +hack_special_boolean_var (int i) +{ + const char *name; + + name = boolean_varlist[i].name; + + if (_rl_stricmp (name, "blink-matching-paren") == 0) + _rl_enable_paren_matching (rl_blink_matching_paren); + else if (_rl_stricmp (name, "prefer-visible-bell") == 0) + { + if (_rl_prefer_visible_bell) + _rl_bell_preference = VISIBLE_BELL; + else + _rl_bell_preference = AUDIBLE_BELL; + } + else if (_rl_stricmp (name, "show-mode-in-prompt") == 0) + _rl_reset_prompt (); +} + +typedef int _rl_sv_func_t PARAMS((const char *)); + +/* These *must* correspond to the array indices for the appropriate + string variable. (Though they're not used right now.) */ +#define V_BELLSTYLE 0 +#define V_COMBEGIN 1 +#define V_EDITMODE 2 +#define V_ISRCHTERM 3 +#define V_KEYMAP 4 + +#define V_STRING 1 +#define V_INT 2 + +/* Forward declarations */ +static int sv_bell_style PARAMS((const char *)); +static int sv_combegin PARAMS((const char *)); +static int sv_dispprefix PARAMS((const char *)); +static int sv_compquery PARAMS((const char *)); +static int sv_compwidth PARAMS((const char *)); +static int sv_editmode PARAMS((const char *)); +static int sv_emacs_modestr PARAMS((const char *)); +static int sv_histsize PARAMS((const char *)); +static int sv_isrchterm PARAMS((const char *)); +static int sv_keymap PARAMS((const char *)); +static int sv_seqtimeout PARAMS((const char *)); +static int sv_viins_modestr PARAMS((const char *)); +static int sv_vicmd_modestr PARAMS((const char *)); + +static const struct { + const char * const name; + int flags; + _rl_sv_func_t *set_func; +} string_varlist[] = { + { "bell-style", V_STRING, sv_bell_style }, + { "comment-begin", V_STRING, sv_combegin }, + { "completion-display-width", V_INT, sv_compwidth }, + { "completion-prefix-display-length", V_INT, sv_dispprefix }, + { "completion-query-items", V_INT, sv_compquery }, + { "editing-mode", V_STRING, sv_editmode }, + { "emacs-mode-string", V_STRING, sv_emacs_modestr }, + { "history-size", V_INT, sv_histsize }, + { "isearch-terminators", V_STRING, sv_isrchterm }, + { "keymap", V_STRING, sv_keymap }, + { "keyseq-timeout", V_INT, sv_seqtimeout }, + { "vi-cmd-mode-string", V_STRING, sv_vicmd_modestr }, + { "vi-ins-mode-string", V_STRING, sv_viins_modestr }, + { (char *)NULL, 0, (_rl_sv_func_t *)0 } +}; + +static int +find_string_var (const char *name) +{ + register int i; + + for (i = 0; string_varlist[i].name; i++) + if (_rl_stricmp (name, string_varlist[i].name) == 0) + return i; + return -1; +} + +static const char * +string_varname (int i) +{ + return ((i >= 0) ? string_varlist[i].name : (char *)NULL); +} + +/* A boolean value that can appear in a `set variable' command is true if + the value is null or empty, `on' (case-insensitive), or "1". Any other + values result in 0 (false). */ +static int +bool_to_int (const char *value) +{ + return (value == 0 || *value == '\0' || + (_rl_stricmp (value, "on") == 0) || + (value[0] == '1' && value[1] == '\0')); +} + +char * +rl_variable_value (const char *name) +{ + register int i; + + /* Check for simple variables first. */ + i = find_boolean_var (name); + if (i >= 0) + return (*boolean_varlist[i].value ? "on" : "off"); + + i = find_string_var (name); + if (i >= 0) + return (_rl_get_string_variable_value (string_varlist[i].name)); + + /* Unknown variable names return NULL. */ + return 0; +} + +int +rl_variable_bind (const char *name, const char *value) +{ + register int i; + int v; + + /* Check for simple variables first. */ + i = find_boolean_var (name); + if (i >= 0) + { + *boolean_varlist[i].value = bool_to_int (value); + if (boolean_varlist[i].flags & V_SPECIAL) + hack_special_boolean_var (i); + return 0; + } + + i = find_string_var (name); + + /* For the time being, string names without a handler function are simply + ignored. */ + if (i < 0 || string_varlist[i].set_func == 0) + { + if (i < 0) + _rl_init_file_error ("%s: unknown variable name", name); + return 0; + } + + v = (*string_varlist[i].set_func) (value); + return v; +} + +static int +sv_editmode (const char *value) +{ + if (_rl_strnicmp (value, "vi", 2) == 0) + { +#if defined (VI_MODE) + _rl_keymap = vi_insertion_keymap; + rl_editing_mode = vi_mode; +#endif /* VI_MODE */ + return 0; + } + else if (_rl_strnicmp (value, "emacs", 5) == 0) + { + _rl_keymap = emacs_standard_keymap; + rl_editing_mode = emacs_mode; + return 0; + } + return 1; +} + +static int +sv_combegin (const char *value) +{ + if (value && *value) + { + FREE (_rl_comment_begin); + _rl_comment_begin = savestring (value); + return 0; + } + return 1; +} + +static int +sv_dispprefix (const char *value) +{ + int nval = 0; + + if (value && *value) + { + nval = atoi (value); + if (nval < 0) + nval = 0; + } + _rl_completion_prefix_display_length = nval; + return 0; +} + +static int +sv_compquery (const char *value) +{ + int nval = 100; + + if (value && *value) + { + nval = atoi (value); + if (nval < 0) + nval = 0; + } + rl_completion_query_items = nval; + return 0; +} + +static int +sv_compwidth (const char *value) +{ + int nval = -1; + + if (value && *value) + nval = atoi (value); + + _rl_completion_columns = nval; + return 0; +} + +static int +sv_histsize (const char *value) +{ + int nval; + + nval = 500; + if (value && *value) + { + nval = atoi (value); + if (nval < 0) + { + unstifle_history (); + return 0; + } + } + stifle_history (nval); + return 0; +} + +static int +sv_keymap (const char *value) +{ + Keymap kmap; + + kmap = rl_get_keymap_by_name (value); + if (kmap) + { + rl_set_keymap (kmap); + return 0; + } + return 1; +} + +static int +sv_seqtimeout (const char *value) +{ + int nval; + + nval = 0; + if (value && *value) + { + nval = atoi (value); + if (nval < 0) + nval = 0; + } + _rl_keyseq_timeout = nval; + return 0; +} + +static int +sv_bell_style (const char *value) +{ + if (value == 0 || *value == '\0') + _rl_bell_preference = AUDIBLE_BELL; + else if (_rl_stricmp (value, "none") == 0 || _rl_stricmp (value, "off") == 0) + _rl_bell_preference = NO_BELL; + else if (_rl_stricmp (value, "audible") == 0 || _rl_stricmp (value, "on") == 0) + _rl_bell_preference = AUDIBLE_BELL; + else if (_rl_stricmp (value, "visible") == 0) + _rl_bell_preference = VISIBLE_BELL; + else + return 1; + return 0; +} + +static int +sv_isrchterm (const char *value) +{ + int beg, end, delim; + char *v; + + if (value == 0) + return 1; + + /* Isolate the value and translate it into a character string. */ + v = savestring (value); + FREE (_rl_isearch_terminators); + if (v[0] == '"' || v[0] == '\'') + { + delim = v[0]; + for (beg = end = 1; v[end] && v[end] != delim; end++) + ; + } + else + { + for (beg = end = 0; v[end] && whitespace (v[end]) == 0; end++) + ; + } + + v[end] = '\0'; + + /* The value starts at v + beg. Translate it into a character string. */ + _rl_isearch_terminators = (char *)xmalloc (2 * strlen (v) + 1); + rl_translate_keyseq (v + beg, _rl_isearch_terminators, &end); + _rl_isearch_terminators[end] = '\0'; + + xfree (v); + return 0; +} + +extern char *_rl_emacs_mode_str; + +static int +sv_emacs_modestr (const char *value) +{ + if (value && *value) + { + FREE (_rl_emacs_mode_str); + _rl_emacs_mode_str = (char *)xmalloc (2 * strlen (value) + 1); + rl_translate_keyseq (value, _rl_emacs_mode_str, &_rl_emacs_modestr_len); + _rl_emacs_mode_str[_rl_emacs_modestr_len] = '\0'; + return 0; + } + else if (value) + { + FREE (_rl_emacs_mode_str); + _rl_emacs_mode_str = (char *)xmalloc (1); + _rl_emacs_mode_str[_rl_emacs_modestr_len = 0] = '\0'; + return 0; + } + else if (value == 0) + { + FREE (_rl_emacs_mode_str); + _rl_emacs_mode_str = 0; /* prompt_modestr does the right thing */ + _rl_emacs_modestr_len = 0; + return 0; + } + return 1; +} + +static int +sv_viins_modestr (const char *value) +{ + if (value && *value) + { + FREE (_rl_vi_ins_mode_str); + _rl_vi_ins_mode_str = (char *)xmalloc (2 * strlen (value) + 1); + rl_translate_keyseq (value, _rl_vi_ins_mode_str, &_rl_vi_ins_modestr_len); + _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len] = '\0'; + return 0; + } + else if (value) + { + FREE (_rl_vi_ins_mode_str); + _rl_vi_ins_mode_str = (char *)xmalloc (1); + _rl_vi_ins_mode_str[_rl_vi_ins_modestr_len = 0] = '\0'; + return 0; + } + else if (value == 0) + { + FREE (_rl_vi_ins_mode_str); + _rl_vi_ins_mode_str = 0; /* prompt_modestr does the right thing */ + _rl_vi_ins_modestr_len = 0; + return 0; + } + return 1; +} + +static int +sv_vicmd_modestr (const char *value) +{ + if (value && *value) + { + FREE (_rl_vi_cmd_mode_str); + _rl_vi_cmd_mode_str = (char *)xmalloc (2 * strlen (value) + 1); + rl_translate_keyseq (value, _rl_vi_cmd_mode_str, &_rl_vi_cmd_modestr_len); + _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len] = '\0'; + return 0; + } + else if (value) + { + FREE (_rl_vi_cmd_mode_str); + _rl_vi_cmd_mode_str = (char *)xmalloc (1); + _rl_vi_cmd_mode_str[_rl_vi_cmd_modestr_len = 0] = '\0'; + return 0; + } + else if (value == 0) + { + FREE (_rl_vi_cmd_mode_str); + _rl_vi_cmd_mode_str = 0; /* prompt_modestr does the right thing */ + _rl_vi_cmd_modestr_len = 0; + return 0; + } + return 1; +} + +/* Return the character which matches NAME. + For example, `Space' returns ' '. */ + +typedef struct { + const char * const name; + int value; +} assoc_list; + +static const assoc_list name_key_alist[] = { + { "DEL", 0x7f }, + { "ESC", '\033' }, + { "Escape", '\033' }, + { "LFD", '\n' }, + { "Newline", '\n' }, + { "RET", '\r' }, + { "Return", '\r' }, + { "Rubout", 0x7f }, + { "SPC", ' ' }, + { "Space", ' ' }, + { "Tab", 0x09 }, + { (char *)0x0, 0 } +}; + +static int +glean_key_from_name (char *name) +{ + register int i; + + for (i = 0; name_key_alist[i].name; i++) + if (_rl_stricmp (name, name_key_alist[i].name) == 0) + return (name_key_alist[i].value); + + return (*(unsigned char *)name); /* XXX was return (*name) */ +} + +/* Auxiliary functions to manage keymaps. */ +struct name_and_keymap { + char *name; + Keymap map; +}; + +static struct name_and_keymap builtin_keymap_names[] = { + { "emacs", emacs_standard_keymap }, + { "emacs-standard", emacs_standard_keymap }, + { "emacs-meta", emacs_meta_keymap }, + { "emacs-ctlx", emacs_ctlx_keymap }, +#if defined (VI_MODE) + { "vi", vi_movement_keymap }, + { "vi-move", vi_movement_keymap }, + { "vi-command", vi_movement_keymap }, + { "vi-insert", vi_insertion_keymap }, +#endif /* VI_MODE */ + { (char *)0x0, (Keymap)0x0 } +}; + +/* -1 for NULL entry */ +#define NUM_BUILTIN_KEYMAPS (sizeof (builtin_keymap_names) / sizeof (builtin_keymap_names[0]) - 1) + +static struct name_and_keymap *keymap_names = builtin_keymap_names; + +static int +_rl_get_keymap_by_name (const char *name) +{ + register int i; + + for (i = 0; keymap_names[i].name; i++) + if (_rl_stricmp (name, keymap_names[i].name) == 0) + return (i); + return -1; +} + +Keymap +rl_get_keymap_by_name (const char *name) +{ + int i; + + i = _rl_get_keymap_by_name (name); + return ((i >= 0) ? keymap_names[i].map : (Keymap) NULL); +} + +static int +_rl_get_keymap_by_map (Keymap map) +{ + register int i; + + for (i = 0; keymap_names[i].name; i++) + if (map == keymap_names[i].map) + return (i); + return -1; +} + +char * +rl_get_keymap_name (Keymap map) +{ + int i; + + i = _rl_get_keymap_by_map (map); + return ((i >= 0) ? keymap_names[i].name : (char *)NULL); +} + +int +rl_set_keymap_name (const char *name, Keymap map) +{ + int i, ni, mi; + + /* First check whether or not we're trying to rename a builtin keymap */ + mi = _rl_get_keymap_by_map (map); + if (mi >= 0 && mi < NUM_BUILTIN_KEYMAPS) + return -1; + + /* Then reject attempts to set one of the builtin names to a new map */ + ni = _rl_get_keymap_by_name (name); + if (ni >= 0 && ni < NUM_BUILTIN_KEYMAPS) + return -1; + + /* Renaming a keymap we already added */ + if (mi >= 0) /* XXX - could be >= NUM_BUILTIN_KEYMAPS */ + { + xfree (keymap_names[mi].name); + keymap_names[mi].name = savestring (name); + return mi; + } + + /* Associating new keymap with existing name */ + if (ni >= 0) + { + keymap_names[ni].map = map; + return ni; + } + + for (i = 0; keymap_names[i].name; i++) + ; + + if (keymap_names == builtin_keymap_names) + { + keymap_names = xmalloc ((i + 2) * sizeof (struct name_and_keymap)); + memcpy (keymap_names, builtin_keymap_names, i * sizeof (struct name_and_keymap)); + } + else + keymap_names = xrealloc (keymap_names, (i + 2) * sizeof (struct name_and_keymap)); + + keymap_names[i].name = savestring (name); + keymap_names[i].map = map; + + keymap_names[i+1].name = NULL; + keymap_names[i+1].map = NULL; + + return i; +} + +void +rl_set_keymap (Keymap map) +{ + if (map) + _rl_keymap = map; +} + +Keymap +rl_get_keymap (void) +{ + return (_rl_keymap); +} + +void +rl_set_keymap_from_edit_mode (void) +{ + if (rl_editing_mode == emacs_mode) + _rl_keymap = emacs_standard_keymap; +#if defined (VI_MODE) + else if (rl_editing_mode == vi_mode) + _rl_keymap = vi_insertion_keymap; +#endif /* VI_MODE */ +} + +char * +rl_get_keymap_name_from_edit_mode (void) +{ + if (rl_editing_mode == emacs_mode) + return "emacs"; +#if defined (VI_MODE) + else if (rl_editing_mode == vi_mode) + return "vi"; +#endif /* VI_MODE */ + else + return "none"; +} + +/* **************************************************************** */ +/* */ +/* Key Binding and Function Information */ +/* */ +/* **************************************************************** */ + +/* Each of the following functions produces information about the + state of keybindings and functions known to Readline. The info + is always printed to rl_outstream, and in such a way that it can + be read back in (i.e., passed to rl_parse_and_bind ()). */ + +/* Print the names of functions known to Readline. */ +void +rl_list_funmap_names (void) +{ + register int i; + const char **funmap_names; + + funmap_names = rl_funmap_names (); + + if (!funmap_names) + return; + + for (i = 0; funmap_names[i]; i++) + fprintf (rl_outstream, "%s\n", funmap_names[i]); + + xfree (funmap_names); +} + +static char * +_rl_get_keyname (int key) +{ + char *keyname; + int i, c; + + keyname = (char *)xmalloc (8); + + c = key; + /* Since this is going to be used to write out keysequence-function + pairs for possible inclusion in an inputrc file, we don't want to + do any special meta processing on KEY. */ + +#if 1 + /* XXX - Experimental */ + /* We might want to do this, but the old version of the code did not. */ + + /* If this is an escape character, we don't want to do any more processing. + Just add the special ESC key sequence and return. */ + if (c == ESC) + { + keyname[0] = '\\'; + keyname[1] = 'e'; + keyname[2] = '\0'; + return keyname; + } +#endif + + /* RUBOUT is translated directly into \C-? */ + if (key == RUBOUT) + { + keyname[0] = '\\'; + keyname[1] = 'C'; + keyname[2] = '-'; + keyname[3] = '?'; + keyname[4] = '\0'; + return keyname; + } + + i = 0; + /* Now add special prefixes needed for control characters. This can + potentially change C. */ + if (CTRL_CHAR (c)) + { + keyname[i++] = '\\'; + keyname[i++] = 'C'; + keyname[i++] = '-'; + c = _rl_to_lower (UNCTRL (c)); + } + + /* XXX experimental code. Turn the characters that are not ASCII or + ISO Latin 1 (128 - 159) into octal escape sequences (\200 - \237). + This changes C. */ + if (c >= 128 && c <= 159) + { + keyname[i++] = '\\'; + keyname[i++] = '2'; + c -= 128; + keyname[i++] = (c / 8) + '0'; + c = (c % 8) + '0'; + } + + /* Now, if the character needs to be quoted with a backslash, do that. */ + if (c == '\\' || c == '"') + keyname[i++] = '\\'; + + /* Now add the key, terminate the string, and return it. */ + keyname[i++] = (char) c; + keyname[i] = '\0'; + + return keyname; +} + +/* Return a NULL terminated array of strings which represent the key + sequences that are used to invoke FUNCTION in MAP. */ +char ** +rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map) +{ + register int key; + char **result; + int result_index, result_size; + + result = (char **)NULL; + result_index = result_size = 0; + + for (key = 0; key < KEYMAP_SIZE; key++) + { + switch (map[key].type) + { + case ISMACR: + /* Macros match, if, and only if, the pointers are identical. + Thus, they are treated exactly like functions in here. */ + case ISFUNC: + /* If the function in the keymap is the one we are looking for, + then add the current KEY to the list of invoking keys. */ + if (map[key].function == function) + { + char *keyname; + + keyname = _rl_get_keyname (key); + + if (result_index + 2 > result_size) + { + result_size += 10; + result = (char **)xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index++] = keyname; + result[result_index] = (char *)NULL; + } + break; + + case ISKMAP: + { + char **seqs; + register int i; + + /* Find the list of keyseqs in this map which have FUNCTION as + their target. Add the key sequences found to RESULT. */ + if (map[key].function) + seqs = + rl_invoking_keyseqs_in_map (function, FUNCTION_TO_KEYMAP (map, key)); + else + break; + + if (seqs == 0) + break; + + for (i = 0; seqs[i]; i++) + { + char *keyname = (char *)xmalloc (6 + strlen (seqs[i])); + + if (key == ESC) + { + /* If ESC is the meta prefix and we're converting chars + with the eighth bit set to ESC-prefixed sequences, then + we can use \M-. Otherwise we need to use the sequence + for ESC. */ + if (_rl_convert_meta_chars_to_ascii && map[ESC].type == ISKMAP) + sprintf (keyname, "\\M-"); + else + sprintf (keyname, "\\e"); + } + else if (CTRL_CHAR (key)) + sprintf (keyname, "\\C-%c", _rl_to_lower (UNCTRL (key))); + else if (key == RUBOUT) + sprintf (keyname, "\\C-?"); + else if (key == '\\' || key == '"') + { + keyname[0] = '\\'; + keyname[1] = (char) key; + keyname[2] = '\0'; + } + else + { + keyname[0] = (char) key; + keyname[1] = '\0'; + } + + strcat (keyname, seqs[i]); + xfree (seqs[i]); + + if (result_index + 2 > result_size) + { + result_size += 10; + result = (char **)xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index++] = keyname; + result[result_index] = (char *)NULL; + } + + xfree (seqs); + } + break; + } + } + return (result); +} + +/* Return a NULL terminated array of strings which represent the key + sequences that can be used to invoke FUNCTION using the current keymap. */ +char ** +rl_invoking_keyseqs (rl_command_func_t *function) +{ + return (rl_invoking_keyseqs_in_map (function, _rl_keymap)); +} + +/* Print all of the functions and their bindings to rl_outstream. If + PRINT_READABLY is non-zero, then print the output in such a way + that it can be read back in. */ +void +rl_function_dumper (int print_readably) +{ + register int i; + const char **names; + const char *name; + + names = rl_funmap_names (); + + fprintf (rl_outstream, "\n"); + + for (i = 0; name = names[i]; i++) + { + rl_command_func_t *function; + char **invokers; + + function = rl_named_function (name); + invokers = rl_invoking_keyseqs_in_map (function, _rl_keymap); + + if (print_readably) + { + if (!invokers) + fprintf (rl_outstream, "# %s (not bound)\n", name); + else + { + register int j; + + for (j = 0; invokers[j]; j++) + { + fprintf (rl_outstream, "\"%s\": %s\n", + invokers[j], name); + xfree (invokers[j]); + } + + xfree (invokers); + } + } + else + { + if (!invokers) + fprintf (rl_outstream, "%s is not bound to any keys\n", + name); + else + { + register int j; + + fprintf (rl_outstream, "%s can be found on ", name); + + for (j = 0; invokers[j] && j < 5; j++) + { + fprintf (rl_outstream, "\"%s\"%s", invokers[j], + invokers[j + 1] ? ", " : ".\n"); + } + + if (j == 5 && invokers[j]) + fprintf (rl_outstream, "...\n"); + + for (j = 0; invokers[j]; j++) + xfree (invokers[j]); + + xfree (invokers); + } + } + } + + xfree (names); +} + +/* Print all of the current functions and their bindings to + rl_outstream. If an explicit argument is given, then print + the output in such a way that it can be read back in. */ +int +rl_dump_functions (int count, int key) +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_function_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +static void +_rl_macro_dumper_internal (int print_readably, Keymap map, char *prefix) +{ + register int key; + char *keyname, *out; + int prefix_len; + + for (key = 0; key < KEYMAP_SIZE; key++) + { + switch (map[key].type) + { + case ISMACR: + keyname = _rl_get_keyname (key); + out = _rl_untranslate_macro_value ((char *)map[key].function, 0); + + if (print_readably) + fprintf (rl_outstream, "\"%s%s\": \"%s\"\n", prefix ? prefix : "", + keyname, + out ? out : ""); + else + fprintf (rl_outstream, "%s%s outputs %s\n", prefix ? prefix : "", + keyname, + out ? out : ""); + xfree (keyname); + xfree (out); + break; + case ISFUNC: + break; + case ISKMAP: + prefix_len = prefix ? strlen (prefix) : 0; + if (key == ESC) + { + keyname = (char *)xmalloc (3 + prefix_len); + if (prefix) + strcpy (keyname, prefix); + keyname[prefix_len] = '\\'; + keyname[prefix_len + 1] = 'e'; + keyname[prefix_len + 2] = '\0'; + } + else + { + keyname = _rl_get_keyname (key); + if (prefix) + { + out = (char *)xmalloc (strlen (keyname) + prefix_len + 1); + strcpy (out, prefix); + strcpy (out + prefix_len, keyname); + xfree (keyname); + keyname = out; + } + } + + _rl_macro_dumper_internal (print_readably, FUNCTION_TO_KEYMAP (map, key), keyname); + xfree (keyname); + break; + } + } +} + +void +rl_macro_dumper (int print_readably) +{ + _rl_macro_dumper_internal (print_readably, _rl_keymap, (char *)NULL); +} + +int +rl_dump_macros (int count, int key) +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_macro_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +static char * +_rl_get_string_variable_value (const char *name) +{ + static char numbuf[32]; + char *ret; + + if (_rl_stricmp (name, "bell-style") == 0) + { + switch (_rl_bell_preference) + { + case NO_BELL: + return "none"; + case VISIBLE_BELL: + return "visible"; + case AUDIBLE_BELL: + default: + return "audible"; + } + } + else if (_rl_stricmp (name, "comment-begin") == 0) + return (_rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT); + else if (_rl_stricmp (name, "completion-display-width") == 0) + { + sprintf (numbuf, "%d", _rl_completion_columns); + return (numbuf); + } + else if (_rl_stricmp (name, "completion-prefix-display-length") == 0) + { + sprintf (numbuf, "%d", _rl_completion_prefix_display_length); + return (numbuf); + } + else if (_rl_stricmp (name, "completion-query-items") == 0) + { + sprintf (numbuf, "%d", rl_completion_query_items); + return (numbuf); + } + else if (_rl_stricmp (name, "editing-mode") == 0) + return (rl_get_keymap_name_from_edit_mode ()); + else if (_rl_stricmp (name, "history-size") == 0) + { + sprintf (numbuf, "%d", history_is_stifled() ? history_max_entries : 0); + return (numbuf); + } + else if (_rl_stricmp (name, "isearch-terminators") == 0) + { + if (_rl_isearch_terminators == 0) + return 0; + ret = _rl_untranslate_macro_value (_rl_isearch_terminators, 0); + if (ret) + { + strncpy (numbuf, ret, sizeof (numbuf) - 1); + xfree (ret); + numbuf[sizeof(numbuf) - 1] = '\0'; + } + else + numbuf[0] = '\0'; + return numbuf; + } + else if (_rl_stricmp (name, "keymap") == 0) + { + ret = rl_get_keymap_name (_rl_keymap); + if (ret == 0) + ret = rl_get_keymap_name_from_edit_mode (); + return (ret ? ret : "none"); + } + else if (_rl_stricmp (name, "keyseq-timeout") == 0) + { + sprintf (numbuf, "%d", _rl_keyseq_timeout); + return (numbuf); + } + else if (_rl_stricmp (name, "emacs-mode-string") == 0) + return (_rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT); + else if (_rl_stricmp (name, "vi-cmd-mode-string") == 0) + return (_rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT); + else if (_rl_stricmp (name, "vi-ins-mode-string") == 0) + return (_rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT); + else + return (0); +} + +void +rl_variable_dumper (int print_readably) +{ + int i; + char *v; + + for (i = 0; boolean_varlist[i].name; i++) + { + if (print_readably) + fprintf (rl_outstream, "set %s %s\n", boolean_varlist[i].name, + *boolean_varlist[i].value ? "on" : "off"); + else + fprintf (rl_outstream, "%s is set to `%s'\n", boolean_varlist[i].name, + *boolean_varlist[i].value ? "on" : "off"); + } + + for (i = 0; string_varlist[i].name; i++) + { + v = _rl_get_string_variable_value (string_varlist[i].name); + if (v == 0) /* _rl_isearch_terminators can be NULL */ + continue; + if (print_readably) + fprintf (rl_outstream, "set %s %s\n", string_varlist[i].name, v); + else + fprintf (rl_outstream, "%s is set to `%s'\n", string_varlist[i].name, v); + } +} + +/* Print all of the current variables and their values to + rl_outstream. If an explicit argument is given, then print + the output in such a way that it can be read back in. */ +int +rl_dump_variables (int count, int key) +{ + if (rl_dispatching) + fprintf (rl_outstream, "\r\n"); + rl_variable_dumper (rl_explicit_arg); + rl_on_new_line (); + return (0); +} + +/* Return non-zero if any members of ARRAY are a substring in STRING. */ +static int +substring_member_of_array (const char *string, const char * const *array) +{ + while (*array) + { + if (_rl_strindex (string, *array)) + return (1); + array++; + } + return (0); +} diff --git a/readline/readline/callback.c b/readline/readline/callback.c new file mode 100644 index 0000000000..a466cf9b6e --- /dev/null +++ b/readline/readline/callback.c @@ -0,0 +1,360 @@ +/* callback.c -- functions to use readline as an X `callback' mechanism. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include "rlconf.h" + +#if defined (READLINE_CALLBACKS) + +#include + +#ifdef HAVE_STDLIB_H +# include +#else +# include "ansi_stdlib.h" +#endif + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "readline.h" +#include "rlprivate.h" +#include "xmalloc.h" + +/* Private data for callback registration functions. See comments in + rl_callback_read_char for more details. */ +_rl_callback_func_t *_rl_callback_func = 0; +_rl_callback_generic_arg *_rl_callback_data = 0; + +/* Applications can set this to non-zero to have readline's signal handlers + installed during the entire duration of reading a complete line, as in + readline-6.2. This should be used with care, because it can result in + readline receiving signals and not handling them until it's called again + via rl_callback_read_char, thereby stealing them from the application. + By default, signal handlers are only active while readline is active. */ +int rl_persistent_signal_handlers = 0; + +/* **************************************************************** */ +/* */ +/* Callback Readline Functions */ +/* */ +/* **************************************************************** */ + +/* Allow using readline in situations where a program may have multiple + things to handle at once, and dispatches them via select(). Call + rl_callback_handler_install() with the prompt and a function to call + whenever a complete line of input is ready. The user must then + call rl_callback_read_char() every time some input is available, and + rl_callback_read_char() will call the user's function with the complete + text read in at each end of line. The terminal is kept prepped + all the time, except during calls to the user's function. Signal + handlers are only installed when the application calls back into + readline, so readline doesn't `steal' signals from the application. */ + +rl_vcpfunc_t *rl_linefunc; /* user callback function */ +static int in_handler; /* terminal_prepped and signals set? */ + +/* Make sure the terminal is set up, initialize readline, and prompt. */ +static void +_rl_callback_newline (void) +{ + rl_initialize (); + + if (in_handler == 0) + { + in_handler = 1; + + if (rl_prep_term_function) + (*rl_prep_term_function) (_rl_meta_flag); + +#if defined (HANDLE_SIGNALS) + if (rl_persistent_signal_handlers) + rl_set_signals (); +#endif + } + + readline_internal_setup (); + RL_CHECK_SIGNALS (); +} + +/* Install a readline handler, set up the terminal, and issue the prompt. */ +void +rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *linefunc) +{ + rl_set_prompt (prompt); + RL_SETSTATE (RL_STATE_CALLBACK); + rl_linefunc = linefunc; + _rl_callback_newline (); +} + +#if defined (HANDLE_SIGNALS) +#define CALLBACK_READ_RETURN() \ + do { \ + if (rl_persistent_signal_handlers == 0) \ + rl_clear_signals (); \ + return; \ + } while (0) +#else +#define CALLBACK_READ_RETURN() return +#endif + +/* Read one character, and dispatch to the handler if it ends the line. */ +void +rl_callback_read_char (void) +{ + char *line; + int eof, jcode; + static procenv_t olevel; + + if (rl_linefunc == NULL) + { + _rl_errmsg ("readline_callback_read_char() called with no handler!"); + abort (); + } + + memcpy ((void *)olevel, (void *)_rl_top_level, sizeof (procenv_t)); +#if defined (HAVE_POSIX_SIGSETJMP) + jcode = sigsetjmp (_rl_top_level, 0); +#else + jcode = setjmp (_rl_top_level); +#endif + if (jcode) + { + (*rl_redisplay_function) (); + _rl_want_redisplay = 0; + memcpy ((void *)_rl_top_level, (void *)olevel, sizeof (procenv_t)); + CALLBACK_READ_RETURN (); + } + +#if defined (HANDLE_SIGNALS) + /* Install signal handlers only when readline has control. */ + if (rl_persistent_signal_handlers == 0) + rl_set_signals (); +#endif + + do + { + RL_CHECK_SIGNALS (); + if (RL_ISSTATE (RL_STATE_ISEARCH)) + { + eof = _rl_isearch_callback (_rl_iscxt); + if (eof == 0 && (RL_ISSTATE (RL_STATE_ISEARCH) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING)) + rl_callback_read_char (); + + CALLBACK_READ_RETURN (); + } + else if (RL_ISSTATE (RL_STATE_NSEARCH)) + { + eof = _rl_nsearch_callback (_rl_nscxt); + + CALLBACK_READ_RETURN (); + } +#if defined (VI_MODE) + /* States that can occur while in state VIMOTION have to be checked + before RL_STATE_VIMOTION */ + else if (RL_ISSTATE (RL_STATE_CHARSEARCH)) + { + int k; + + k = _rl_callback_data->i2; + + eof = (*_rl_callback_func) (_rl_callback_data); + /* If the function `deregisters' itself, make sure the data is + cleaned up. */ + if (_rl_callback_func == 0) /* XXX - just sanity check */ + { + if (_rl_callback_data) + { + _rl_callback_data_dispose (_rl_callback_data); + _rl_callback_data = 0; + } + } + + /* Messy case where vi motion command can be char search */ + if (RL_ISSTATE (RL_STATE_VIMOTION)) + { + _rl_vi_domove_motion_cleanup (k, _rl_vimvcxt); + _rl_internal_char_cleanup (); + CALLBACK_READ_RETURN (); + } + + _rl_internal_char_cleanup (); + } + else if (RL_ISSTATE (RL_STATE_VIMOTION)) + { + eof = _rl_vi_domove_callback (_rl_vimvcxt); + /* Should handle everything, including cleanup, numeric arguments, + and turning off RL_STATE_VIMOTION */ + if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) + _rl_internal_char_cleanup (); + + CALLBACK_READ_RETURN (); + } +#endif + else if (RL_ISSTATE (RL_STATE_NUMERICARG)) + { + eof = _rl_arg_callback (_rl_argcxt); + if (eof == 0 && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) && RL_ISSTATE (RL_STATE_INPUTPENDING)) + rl_callback_read_char (); + /* XXX - this should handle _rl_last_command_was_kill better */ + else if (RL_ISSTATE (RL_STATE_NUMERICARG) == 0) + _rl_internal_char_cleanup (); + + CALLBACK_READ_RETURN (); + } + else if (RL_ISSTATE (RL_STATE_MULTIKEY)) + { + eof = _rl_dispatch_callback (_rl_kscxt); /* For now */ + while ((eof == -1 || eof == -2) && RL_ISSTATE (RL_STATE_MULTIKEY) && _rl_kscxt && (_rl_kscxt->flags & KSEQ_DISPATCHED)) + eof = _rl_dispatch_callback (_rl_kscxt); + if (RL_ISSTATE (RL_STATE_MULTIKEY) == 0) + { + _rl_internal_char_cleanup (); + _rl_want_redisplay = 1; + } + } + else if (_rl_callback_func) + { + /* This allows functions that simply need to read an additional + character (like quoted-insert) to register a function to be + called when input is available. _rl_callback_data is a + pointer to a struct that has the argument count originally + passed to the registering function and space for any additional + parameters. */ + eof = (*_rl_callback_func) (_rl_callback_data); + /* If the function `deregisters' itself, make sure the data is + cleaned up. */ + if (_rl_callback_func == 0) + { + if (_rl_callback_data) + { + _rl_callback_data_dispose (_rl_callback_data); + _rl_callback_data = 0; + } + _rl_internal_char_cleanup (); + } + } + else + eof = readline_internal_char (); + + RL_CHECK_SIGNALS (); + if (rl_done == 0 && _rl_want_redisplay) + { + (*rl_redisplay_function) (); + _rl_want_redisplay = 0; + } + + if (rl_done) + { + line = readline_internal_teardown (eof); + + if (rl_deprep_term_function) + (*rl_deprep_term_function) (); +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + in_handler = 0; + (*rl_linefunc) (line); + + /* If the user did not clear out the line, do it for him. */ + if (rl_line_buffer[0]) + _rl_init_line_state (); + + /* Redisplay the prompt if readline_handler_{install,remove} + not called. */ + if (in_handler == 0 && rl_linefunc) + _rl_callback_newline (); + } + } + while (rl_pending_input || _rl_pushed_input_available () || RL_ISSTATE (RL_STATE_MACROINPUT)); + + CALLBACK_READ_RETURN (); +} + +/* Remove the handler, and make sure the terminal is in its normal state. */ +void +rl_callback_handler_remove (void) +{ + rl_linefunc = NULL; + RL_UNSETSTATE (RL_STATE_CALLBACK); + RL_CHECK_SIGNALS (); + if (in_handler) + { + in_handler = 0; + if (rl_deprep_term_function) + (*rl_deprep_term_function) (); +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + } +} + +_rl_callback_generic_arg * +_rl_callback_data_alloc (int count) +{ + _rl_callback_generic_arg *arg; + + arg = (_rl_callback_generic_arg *)xmalloc (sizeof (_rl_callback_generic_arg)); + arg->count = count; + + arg->i1 = arg->i2 = 0; + + return arg; +} + +void +_rl_callback_data_dispose (_rl_callback_generic_arg *arg) +{ + xfree (arg); +} + +/* Make sure that this agrees with cases in rl_callback_read_char */ +void +rl_callback_sigcleanup (void) +{ + if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) + return; + + if (RL_ISSTATE (RL_STATE_ISEARCH)) + _rl_isearch_cleanup (_rl_iscxt, 0); + else if (RL_ISSTATE (RL_STATE_NSEARCH)) + _rl_nsearch_cleanup (_rl_nscxt, 0); + else if (RL_ISSTATE (RL_STATE_VIMOTION)) + RL_UNSETSTATE (RL_STATE_VIMOTION); + else if (RL_ISSTATE (RL_STATE_NUMERICARG)) + { + _rl_argcxt = 0; + RL_UNSETSTATE (RL_STATE_NUMERICARG); + } + else if (RL_ISSTATE (RL_STATE_MULTIKEY)) + RL_UNSETSTATE (RL_STATE_MULTIKEY); + if (RL_ISSTATE (RL_STATE_CHARSEARCH)) + RL_UNSETSTATE (RL_STATE_CHARSEARCH); + + _rl_callback_func = 0; +} +#endif diff --git a/readline/readline/chardefs.h b/readline/readline/chardefs.h new file mode 100644 index 0000000000..3cf1326aab --- /dev/null +++ b/readline/readline/chardefs.h @@ -0,0 +1,164 @@ +/* chardefs.h -- Character definitions for readline. */ + +/* Copyright (C) 1994-2015 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#ifndef _CHARDEFS_H_ +#define _CHARDEFS_H_ + +#include + +#if defined (HAVE_CONFIG_H) +# if defined (HAVE_STRING_H) +# if ! defined (STDC_HEADERS) && defined (HAVE_MEMORY_H) +# include +# endif +# include +# endif /* HAVE_STRING_H */ +# if defined (HAVE_STRINGS_H) +# include +# endif /* HAVE_STRINGS_H */ +#else +# include +#endif /* !HAVE_CONFIG_H */ + +#ifndef whitespace +#define whitespace(c) (((c) == ' ') || ((c) == '\t')) +#endif + +#ifdef CTRL +# undef CTRL +#endif +#ifdef UNCTRL +# undef UNCTRL +#endif + +/* Some character stuff. */ +#define control_character_threshold 0x020 /* Smaller than this is control. */ +#define control_character_mask 0x1f /* 0x20 - 1 */ +#define meta_character_threshold 0x07f /* Larger than this is Meta. */ +#define control_character_bit 0x40 /* 0x000000, must be off. */ +#define meta_character_bit 0x080 /* x0000000, must be on. */ +#define largest_char 255 /* Largest character value. */ + +#define CTRL_CHAR(c) ((c) < control_character_threshold && (((c) & 0x80) == 0)) +#define META_CHAR(c) ((c) > meta_character_threshold && (c) <= largest_char) + +#define CTRL(c) ((c) & control_character_mask) +#define META(c) ((c) | meta_character_bit) + +#define UNMETA(c) ((c) & (~meta_character_bit)) +#define UNCTRL(c) _rl_to_upper(((c)|control_character_bit)) + +#if defined STDC_HEADERS || (!defined (isascii) && !defined (HAVE_ISASCII)) +# define IN_CTYPE_DOMAIN(c) 1 +#else +# define IN_CTYPE_DOMAIN(c) isascii(c) +#endif + +#if !defined (isxdigit) && !defined (HAVE_ISXDIGIT) && !defined (__cplusplus) +# define isxdigit(c) (isdigit((unsigned char)(c)) || ((c) >= 'a' && (c) <= 'f') || ((c) >= 'A' && (c) <= 'F')) +#endif + +#if defined (CTYPE_NON_ASCII) +# define NON_NEGATIVE(c) 1 +#else +# define NON_NEGATIVE(c) ((unsigned char)(c) == (c)) +#endif + +/* Some systems define these; we want our definitions. */ +#undef ISPRINT + +/* Beware: these only work with single-byte ASCII characters. */ + +#define ISALNUM(c) (IN_CTYPE_DOMAIN (c) && isalnum ((unsigned char)c)) +#define ISALPHA(c) (IN_CTYPE_DOMAIN (c) && isalpha ((unsigned char)c)) +#define ISDIGIT(c) (IN_CTYPE_DOMAIN (c) && isdigit ((unsigned char)c)) +#define ISLOWER(c) (IN_CTYPE_DOMAIN (c) && islower ((unsigned char)c)) +#define ISPRINT(c) (IN_CTYPE_DOMAIN (c) && isprint ((unsigned char)c)) +#define ISUPPER(c) (IN_CTYPE_DOMAIN (c) && isupper ((unsigned char)c)) +#define ISXDIGIT(c) (IN_CTYPE_DOMAIN (c) && isxdigit ((unsigned char)c)) + +#define _rl_lowercase_p(c) (NON_NEGATIVE(c) && ISLOWER(c)) +#define _rl_uppercase_p(c) (NON_NEGATIVE(c) && ISUPPER(c)) +#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') + +#define _rl_pure_alphabetic(c) (NON_NEGATIVE(c) && ISALPHA(c)) +#define ALPHABETIC(c) (NON_NEGATIVE(c) && ISALNUM(c)) + +#ifndef _rl_to_upper +# define _rl_to_upper(c) (_rl_lowercase_p(c) ? toupper((unsigned char)c) : (c)) +# define _rl_to_lower(c) (_rl_uppercase_p(c) ? tolower((unsigned char)c) : (c)) +#endif + +#ifndef _rl_digit_value +# define _rl_digit_value(x) ((x) - '0') +#endif + +#ifndef _rl_isident +# define _rl_isident(c) (ISALNUM(c) || (c) == '_') +#endif + +#ifndef ISOCTAL +# define ISOCTAL(c) ((c) >= '0' && (c) <= '7') +#endif +#define OCTVALUE(c) ((c) - '0') + +#define HEXVALUE(c) \ + (((c) >= 'a' && (c) <= 'f') \ + ? (c)-'a'+10 \ + : (c) >= 'A' && (c) <= 'F' ? (c)-'A'+10 : (c)-'0') + +#ifndef NEWLINE +#define NEWLINE '\n' +#endif + +#ifndef RETURN +#define RETURN CTRL('M') +#endif + +#ifndef RUBOUT +#define RUBOUT 0x7f +#endif + +#ifndef TAB +#define TAB '\t' +#endif + +#ifdef ABORT_CHAR +#undef ABORT_CHAR +#endif +#define ABORT_CHAR CTRL('G') + +#ifdef PAGE +#undef PAGE +#endif +#define PAGE CTRL('L') + +#ifdef SPACE +#undef SPACE +#endif +#define SPACE ' ' /* XXX - was 0x20 */ + +#ifdef ESC +#undef ESC +#endif +#define ESC CTRL('[') + +#endif /* _CHARDEFS_H_ */ diff --git a/readline/readline/colors.c b/readline/readline/colors.c new file mode 100644 index 0000000000..81aecfe0c8 --- /dev/null +++ b/readline/readline/colors.c @@ -0,0 +1,294 @@ +/* `dir', `vdir' and `ls' directory listing programs for GNU. + + Modified by Chet Ramey for Readline. + + Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015, 2017 + Free Software Foundation, Inc. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +/* Written by Richard Stallman and David MacKenzie. */ + +/* Color support by Peter Anvin and Dennis + Flaherty based on original patches by + Greg Lee . */ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include "rlconf.h" + +#include + +#include "posixstat.h" // stat related macros (S_ISREG, ...) +#include // S_ISUID + +#ifndef S_ISDIR +# define S_ISDIR(m) (((m) & S_IFMT) == S_IFDIR) +#endif + +// strlen() +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +// abort() +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "readline.h" +#include "rldefs.h" + +#ifdef COLOR_SUPPORT + +#include "xmalloc.h" +#include "colors.h" + +static bool is_colored (enum indicator_no type); +static void restore_default_color (void); + +COLOR_EXT_TYPE *_rl_color_ext_list = 0; + +/* Output a color indicator (which may contain nulls). */ +void +_rl_put_indicator (const struct bin_str *ind) +{ + fwrite (ind->string, ind->len, 1, rl_outstream); +} + +static bool +is_colored (enum indicator_no colored_filetype) +{ + size_t len = _rl_color_indicator[colored_filetype].len; + char const *s = _rl_color_indicator[colored_filetype].string; + return ! (len == 0 + || (len == 1 && strncmp (s, "0", 1) == 0) + || (len == 2 && strncmp (s, "00", 2) == 0)); +} + +static void +restore_default_color (void) +{ + _rl_put_indicator (&_rl_color_indicator[C_LEFT]); + _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); +} + +void +_rl_set_normal_color (void) +{ + if (is_colored (C_NORM)) + { + _rl_put_indicator (&_rl_color_indicator[C_LEFT]); + _rl_put_indicator (&_rl_color_indicator[C_NORM]); + _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); + } +} + +bool +_rl_print_prefix_color (void) +{ + struct bin_str *s; + + /* What do we want to use for the prefix? Let's try cyan first, see colors.h */ + s = &_rl_color_indicator[C_PREFIX]; + if (s->string != NULL) + { + if (is_colored (C_NORM)) + restore_default_color (); + _rl_put_indicator (&_rl_color_indicator[C_LEFT]); + _rl_put_indicator (s); + _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); + return 0; + } + else + return 1; +} + +/* Returns whether any color sequence was printed. */ +bool +_rl_print_color_indicator (const char *f) +{ + enum indicator_no colored_filetype; + COLOR_EXT_TYPE *ext; /* Color extension */ + size_t len; /* Length of name */ + + const char* name; + char *filename; + struct stat astat, linkstat; + mode_t mode; + int linkok; /* 1 == ok, 0 == dangling symlink, -1 == missing */ + int stat_ok; + + name = f; + + /* This should already have undergone tilde expansion */ + filename = 0; + if (rl_filename_stat_hook) + { + filename = savestring (f); + (*rl_filename_stat_hook) (&filename); + name = filename; + } + +#if defined (HAVE_LSTAT) + stat_ok = lstat(name, &astat); +#else + stat_ok = stat(name, &astat); +#endif + if (stat_ok == 0) + { + mode = astat.st_mode; +#if defined (HAVE_LSTAT) + if (S_ISLNK (mode)) + { + linkok = stat (name, &linkstat) == 0; + if (linkok && strncmp (_rl_color_indicator[C_LINK].string, "target", 6) == 0) + mode = linkstat.st_mode; + } + else +#endif + linkok = 1; + } + else + linkok = -1; + + /* Is this a nonexistent file? If so, linkok == -1. */ + + if (linkok == -1 && _rl_color_indicator[C_MISSING].string != NULL) + colored_filetype = C_MISSING; + else if (linkok == 0 && _rl_color_indicator[C_ORPHAN].string != NULL) + colored_filetype = C_ORPHAN; /* dangling symlink */ + else if(stat_ok != 0) + { + static enum indicator_no filetype_indicator[] = FILETYPE_INDICATORS; + colored_filetype = filetype_indicator[normal]; //f->filetype]; + } + else + { + if (S_ISREG (mode)) + { + colored_filetype = C_FILE; + +#if defined (S_ISUID) + if ((mode & S_ISUID) != 0 && is_colored (C_SETUID)) + colored_filetype = C_SETUID; + else +#endif +#if defined (S_ISGID) + if ((mode & S_ISGID) != 0 && is_colored (C_SETGID)) + colored_filetype = C_SETGID; + else +#endif + if (is_colored (C_CAP) && 0) //f->has_capability) + colored_filetype = C_CAP; + else if ((mode & S_IXUGO) != 0 && is_colored (C_EXEC)) + colored_filetype = C_EXEC; + else if ((1 < astat.st_nlink) && is_colored (C_MULTIHARDLINK)) + colored_filetype = C_MULTIHARDLINK; + } + else if (S_ISDIR (mode)) + { + colored_filetype = C_DIR; + +#if defined (S_ISVTX) + if ((mode & S_ISVTX) && (mode & S_IWOTH) + && is_colored (C_STICKY_OTHER_WRITABLE)) + colored_filetype = C_STICKY_OTHER_WRITABLE; + else +#endif + if ((mode & S_IWOTH) != 0 && is_colored (C_OTHER_WRITABLE)) + colored_filetype = C_OTHER_WRITABLE; +#if defined (S_ISVTX) + else if ((mode & S_ISVTX) != 0 && is_colored (C_STICKY)) + colored_filetype = C_STICKY; +#endif + } +#if defined (S_ISLNK) + else if (S_ISLNK (mode)) + colored_filetype = C_LINK; +#endif + else if (S_ISFIFO (mode)) + colored_filetype = C_FIFO; +#if defined (S_ISSOCK) + else if (S_ISSOCK (mode)) + colored_filetype = C_SOCK; +#endif + else if (S_ISBLK (mode)) + colored_filetype = C_BLK; + else if (S_ISCHR (mode)) + colored_filetype = C_CHR; + else + { + /* Classify a file of some other type as C_ORPHAN. */ + colored_filetype = C_ORPHAN; + } + } + + /* Check the file's suffix only if still classified as C_FILE. */ + ext = NULL; + if (colored_filetype == C_FILE) + { + /* Test if NAME has a recognized suffix. */ + len = strlen (name); + name += len; /* Pointer to final \0. */ + for (ext = _rl_color_ext_list; ext != NULL; ext = ext->next) + { + if (ext->ext.len <= len + && strncmp (name - ext->ext.len, ext->ext.string, + ext->ext.len) == 0) + break; + } + } + + free (filename); /* NULL or savestring return value */ + + { + const struct bin_str *const s + = ext ? &(ext->seq) : &_rl_color_indicator[colored_filetype]; + if (s->string != NULL) + { + /* Need to reset so not dealing with attribute combinations */ + if (is_colored (C_NORM)) + restore_default_color (); + _rl_put_indicator (&_rl_color_indicator[C_LEFT]); + _rl_put_indicator (s); + _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); + return 0; + } + else + return 1; + } +} + +void +_rl_prep_non_filename_text (void) +{ + if (_rl_color_indicator[C_END].string != NULL) + _rl_put_indicator (&_rl_color_indicator[C_END]); + else + { + _rl_put_indicator (&_rl_color_indicator[C_LEFT]); + _rl_put_indicator (&_rl_color_indicator[C_RESET]); + _rl_put_indicator (&_rl_color_indicator[C_RIGHT]); + } +} +#endif /* COLOR_SUPPORT */ diff --git a/readline/readline/colors.h b/readline/readline/colors.h new file mode 100644 index 0000000000..6561ad90c1 --- /dev/null +++ b/readline/readline/colors.h @@ -0,0 +1,126 @@ +/* `dir', `vdir' and `ls' directory listing programs for GNU. + + Modified by Chet Ramey for Readline. + + Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2015 + Free Software Foundation, Inc. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +/* Written by Richard Stallman and David MacKenzie. */ + +/* Color support by Peter Anvin and Dennis + Flaherty based on original patches by + Greg Lee . */ + +#ifndef _COLORS_H_ +#define _COLORS_H_ + +#include // size_t + +#if defined(__TANDEM) && defined(HAVE_STDBOOL_H) && (__STDC_VERSION__ < 199901L) +typedef int _Bool; +#endif + +#if defined (HAVE_STDBOOL_H) +# include // bool +#else +typedef int _rl_bool_t; + +#ifdef bool +# undef bool +#endif +#define bool _rl_bool_t + +#ifndef true +# define true 1 +# define false 0 +#endif + +#endif /* !HAVE_STDBOOL_H */ + +/* Null is a valid character in a color indicator (think about Epson + printers, for example) so we have to use a length/buffer string + type. */ +struct bin_str + { + size_t len; + const char *string; + }; + +/* file type indicators (dir, sock, fifo, ...) + Default value is initialized in parse-colors.c. + It is then modified from the values of $LS_COLORS. */ +extern struct bin_str _rl_color_indicator[]; + +/* The LS_COLORS variable is in a termcap-like format. */ +typedef struct _color_ext_type + { + struct bin_str ext; /* The extension we're looking for */ + struct bin_str seq; /* The sequence to output when we do */ + struct _color_ext_type *next; /* Next in list */ + } COLOR_EXT_TYPE; + +/* file extensions indicators (.txt, .log, .jpg, ...) + Values are taken from $LS_COLORS in rl_parse_colors(). */ +extern COLOR_EXT_TYPE *_rl_color_ext_list; + +#define FILETYPE_INDICATORS \ + { \ + C_ORPHAN, C_FIFO, C_CHR, C_DIR, C_BLK, C_FILE, \ + C_LINK, C_SOCK, C_FILE, C_DIR \ + } + +/* Whether we used any colors in the output so far. If so, we will + need to restore the default color later. If not, we will need to + call prep_non_filename_text before using color for the first time. */ + +enum indicator_no + { + C_LEFT, C_RIGHT, C_END, C_RESET, C_NORM, C_FILE, C_DIR, C_LINK, + C_FIFO, C_SOCK, + C_BLK, C_CHR, C_MISSING, C_ORPHAN, C_EXEC, C_DOOR, C_SETUID, C_SETGID, + C_STICKY, C_OTHER_WRITABLE, C_STICKY_OTHER_WRITABLE, C_CAP, C_MULTIHARDLINK, + C_CLR_TO_EOL + }; + + +#if !S_IXUGO +# define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) +#endif + +enum filetype + { + unknown, + fifo, + chardev, + directory, + blockdev, + normal, + symbolic_link, + sock, + whiteout, + arg_directory + }; + +/* Prefix color, currently same as socket */ +#define C_PREFIX C_SOCK + +extern void _rl_put_indicator (const struct bin_str *ind); +extern void _rl_set_normal_color (void); +extern bool _rl_print_prefix_color (void); +extern bool _rl_print_color_indicator (const char *f); +extern void _rl_prep_non_filename_text (void); + +#endif /* !_COLORS_H_ */ diff --git a/readline/readline/compat.c b/readline/readline/compat.c new file mode 100644 index 0000000000..3ade3629ae --- /dev/null +++ b/readline/readline/compat.c @@ -0,0 +1,106 @@ +/* compat.c -- backwards compatibility functions. */ + +/* Copyright (C) 2000-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#include "rlstdc.h" +#include "rltypedefs.h" + +extern void rl_free_undo_list PARAMS((void)); +extern int rl_maybe_save_line PARAMS((void)); +extern int rl_maybe_unsave_line PARAMS((void)); +extern int rl_maybe_replace_line PARAMS((void)); + +extern int rl_crlf PARAMS((void)); +extern int rl_ding PARAMS((void)); +extern int rl_alphabetic PARAMS((int)); + +extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *)); +extern char *rl_username_completion_function PARAMS((const char *, int)); +extern char *rl_filename_completion_function PARAMS((const char *, int)); + +/* Provide backwards-compatible entry points for old function names. */ + +void +free_undo_list (void) +{ + rl_free_undo_list (); +} + +int +maybe_replace_line (void) +{ + return rl_maybe_replace_line (); +} + +int +maybe_save_line (void) +{ + return rl_maybe_save_line (); +} + +int +maybe_unsave_line (void) +{ + return rl_maybe_unsave_line (); +} + +int +ding (void) +{ + return rl_ding (); +} + +int +crlf (void) +{ + return rl_crlf (); +} + +int +alphabetic (int c) +{ + return rl_alphabetic (c); +} + +char ** +completion_matches (const char *s, rl_compentry_func_t *f) +{ + return rl_completion_matches (s, f); +} + +char * +username_completion_function (const char *s, int i) +{ + return rl_username_completion_function (s, i); +} + +char * +filename_completion_function (const char *s, int i) +{ + return rl_filename_completion_function (s, i); +} diff --git a/readline/readline/complete.c b/readline/readline/complete.c new file mode 100644 index 0000000000..adce0d69ac --- /dev/null +++ b/readline/readline/complete.c @@ -0,0 +1,2958 @@ +/* complete.c -- filename completion for readline. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#if defined (HAVE_SYS_FILE_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +#include +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#if defined (HAVE_PWD_H) +#include +#endif + +#include "posixdir.h" +#include "posixstat.h" + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "xmalloc.h" +#include "rlprivate.h" + +#if defined (COLOR_SUPPORT) +# include "colors.h" +#endif + +#ifdef __STDC__ +typedef int QSFUNC (const void *, const void *); +#else +typedef int QSFUNC (); +#endif + +#ifdef HAVE_LSTAT +# define LSTAT lstat +#else +# define LSTAT stat +#endif + +/* Unix version of a hidden file. Could be different on other systems. */ +#define HIDDEN_FILE(fname) ((fname)[0] == '.') + +/* Most systems don't declare getpwent in if _POSIX_SOURCE is + defined. */ +#if defined (HAVE_GETPWENT) && (!defined (HAVE_GETPW_DECLS) || defined (_POSIX_SOURCE)) +extern struct passwd *getpwent PARAMS((void)); +#endif /* HAVE_GETPWENT && (!HAVE_GETPW_DECLS || _POSIX_SOURCE) */ + +/* If non-zero, then this is the address of a function to call when + completing a word would normally display the list of possible matches. + This function is called instead of actually doing the display. + It takes three arguments: (char **matches, int num_matches, int max_length) + where MATCHES is the array of strings that matched, NUM_MATCHES is the + number of strings in that array, and MAX_LENGTH is the length of the + longest string in that array. */ +rl_compdisp_func_t *rl_completion_display_matches_hook = (rl_compdisp_func_t *)NULL; + +#if defined (VISIBLE_STATS) || defined (COLOR_SUPPORT) +# if !defined (X_OK) +# define X_OK 1 +# endif +#endif + +#if defined (VISIBLE_STATS) +static int stat_char PARAMS((char *)); +#endif + +#if defined (COLOR_SUPPORT) +static int colored_stat_start PARAMS((const char *)); +static void colored_stat_end PARAMS((void)); +static int colored_prefix_start PARAMS((void)); +static void colored_prefix_end PARAMS((void)); +#endif + +static int path_isdir PARAMS((const char *)); + +static char *rl_quote_filename PARAMS((char *, int, char *)); + +static void _rl_complete_sigcleanup PARAMS((int, void *)); + +static void set_completion_defaults PARAMS((int)); +static int get_y_or_n PARAMS((int)); +static int _rl_internal_pager PARAMS((int)); +static char *printable_part PARAMS((char *)); +static int fnwidth PARAMS((const char *)); +static int fnprint PARAMS((const char *, int, const char *)); +static int print_filename PARAMS((char *, char *, int)); + +static char **gen_completion_matches PARAMS((char *, int, int, rl_compentry_func_t *, int, int)); + +static char **remove_duplicate_matches PARAMS((char **)); +static void insert_match PARAMS((char *, int, int, char *)); +static int append_to_match PARAMS((char *, int, int, int)); +static void insert_all_matches PARAMS((char **, int, char *)); +static int complete_fncmp PARAMS((const char *, int, const char *, int)); +static void display_matches PARAMS((char **)); +static int compute_lcd_of_matches PARAMS((char **, int, const char *)); +static int postprocess_matches PARAMS((char ***, int)); +static int complete_get_screenwidth PARAMS((void)); + +static char *make_quoted_replacement PARAMS((char *, int, char *)); + +/* **************************************************************** */ +/* */ +/* Completion matching, from readline's point of view. */ +/* */ +/* **************************************************************** */ + +/* Variables known only to the readline library. */ + +/* If non-zero, non-unique completions always show the list of matches. */ +int _rl_complete_show_all = 0; + +/* If non-zero, non-unique completions show the list of matches, unless it + is not possible to do partial completion and modify the line. */ +int _rl_complete_show_unmodified = 0; + +/* If non-zero, completed directory names have a slash appended. */ +int _rl_complete_mark_directories = 1; + +/* If non-zero, the symlinked directory completion behavior introduced in + readline-4.2a is disabled, and symlinks that point to directories have + a slash appended (subject to the value of _rl_complete_mark_directories). + This is user-settable via the mark-symlinked-directories variable. */ +int _rl_complete_mark_symlink_dirs = 0; + +/* If non-zero, completions are printed horizontally in alphabetical order, + like `ls -x'. */ +int _rl_print_completions_horizontally; + +/* Non-zero means that case is not significant in filename completion. */ +#if (defined (__MSDOS__) && !defined (__DJGPP__)) || (defined (_WIN32) && !defined (__CYGWIN__)) +int _rl_completion_case_fold = 1; +#else +int _rl_completion_case_fold = 0; +#endif + +/* Non-zero means that `-' and `_' are equivalent when comparing filenames + for completion. */ +int _rl_completion_case_map = 0; + +/* If zero, don't match hidden files (filenames beginning with a `.' on + Unix) when doing filename completion. */ +int _rl_match_hidden_files = 1; + +/* Length in characters of a common prefix replaced with an ellipsis (`...') + when displaying completion matches. Matches whose printable portion has + more than this number of displaying characters in common will have the common + display prefix replaced with an ellipsis. */ +int _rl_completion_prefix_display_length = 0; + +/* The readline-private number of screen columns to use when displaying + matches. If < 0 or > _rl_screenwidth, it is ignored. */ +int _rl_completion_columns = -1; + +#if defined (COLOR_SUPPORT) +/* Non-zero means to use colors to indicate file type when listing possible + completions. The colors used are taken from $LS_COLORS, if set. */ +int _rl_colored_stats = 0; + +/* Non-zero means to use a color (currently magenta) to indicate the common + prefix of a set of possible word completions. */ +int _rl_colored_completion_prefix = 0; +#endif + +/* If non-zero, when completing in the middle of a word, don't insert + characters from the match that match characters following point in + the word. This means, for instance, completing when the cursor is + after the `e' in `Makefile' won't result in `Makefilefile'. */ +int _rl_skip_completed_text = 0; + +/* If non-zero, menu completion displays the common prefix first in the + cycle of possible completions instead of the last. */ +int _rl_menu_complete_prefix_first = 0; + +/* Global variables available to applications using readline. */ + +#if defined (VISIBLE_STATS) +/* Non-zero means add an additional character to each filename displayed + during listing completion iff rl_filename_completion_desired which helps + to indicate the type of file being listed. */ +int rl_visible_stats = 0; +#endif /* VISIBLE_STATS */ + +/* If non-zero, then this is the address of a function to call when + completing on a directory name. The function is called with + the address of a string (the current directory name) as an arg. */ +rl_icppfunc_t *rl_directory_completion_hook = (rl_icppfunc_t *)NULL; + +rl_icppfunc_t *rl_directory_rewrite_hook = (rl_icppfunc_t *)NULL; + +rl_icppfunc_t *rl_filename_stat_hook = (rl_icppfunc_t *)NULL; + +/* If non-zero, this is the address of a function to call when reading + directory entries from the filesystem for completion and comparing + them to the partial word to be completed. The function should + either return its first argument (if no conversion takes place) or + newly-allocated memory. This can, for instance, convert filenames + between character sets for comparison against what's typed at the + keyboard. The returned value is what is added to the list of + matches. The second argument is the length of the filename to be + converted. */ +rl_dequote_func_t *rl_filename_rewrite_hook = (rl_dequote_func_t *)NULL; + +/* Non-zero means readline completion functions perform tilde expansion. */ +int rl_complete_with_tilde_expansion = 0; + +/* Pointer to the generator function for completion_matches (). + NULL means to use rl_filename_completion_function (), the default filename + completer. */ +rl_compentry_func_t *rl_completion_entry_function = (rl_compentry_func_t *)NULL; + +/* Pointer to generator function for rl_menu_complete (). NULL means to use + *rl_completion_entry_function (see above). */ +rl_compentry_func_t *rl_menu_completion_entry_function = (rl_compentry_func_t *)NULL; + +/* Pointer to alternative function to create matches. + Function is called with TEXT, START, and END. + START and END are indices in RL_LINE_BUFFER saying what the boundaries + of TEXT are. + If this function exists and returns NULL then call the value of + rl_completion_entry_function to try to match, otherwise use the + array of strings returned. */ +rl_completion_func_t *rl_attempted_completion_function = (rl_completion_func_t *)NULL; + +/* Non-zero means to suppress normal filename completion after the + user-specified completion function has been called. */ +int rl_attempted_completion_over = 0; + +/* Set to a character indicating the type of completion being performed + by rl_complete_internal, available for use by application completion + functions. */ +int rl_completion_type = 0; + +/* Up to this many items will be displayed in response to a + possible-completions call. After that, we ask the user if + she is sure she wants to see them all. A negative value means + don't ask. */ +int rl_completion_query_items = 100; + +int _rl_page_completions = 1; + +/* The basic list of characters that signal a break between words for the + completer routine. The contents of this variable is what breaks words + in the shell, i.e. " \t\n\"\\'`@$><=" */ +const char *rl_basic_word_break_characters = " \t\n\"\\'`@$><=;|&{("; /* }) */ + +/* List of basic quoting characters. */ +const char *rl_basic_quote_characters = "\"'"; + +/* The list of characters that signal a break between words for + rl_complete_internal. The default list is the contents of + rl_basic_word_break_characters. */ +/*const*/ char *rl_completer_word_break_characters = (/*const*/ char *)NULL; + +/* Hook function to allow an application to set the completion word + break characters before readline breaks up the line. Allows + position-dependent word break characters. */ +rl_cpvfunc_t *rl_completion_word_break_hook = (rl_cpvfunc_t *)NULL; + +/* List of characters which can be used to quote a substring of the line. + Completion occurs on the entire substring, and within the substring + rl_completer_word_break_characters are treated as any other character, + unless they also appear within this list. */ +const char *rl_completer_quote_characters = (const char *)NULL; + +/* List of characters that should be quoted in filenames by the completer. */ +const char *rl_filename_quote_characters = (const char *)NULL; + +/* List of characters that are word break characters, but should be left + in TEXT when it is passed to the completion function. The shell uses + this to help determine what kind of completing to do. */ +const char *rl_special_prefixes = (const char *)NULL; + +/* If non-zero, then disallow duplicates in the matches. */ +int rl_ignore_completion_duplicates = 1; + +/* Non-zero means that the results of the matches are to be treated + as filenames. This is ALWAYS zero on entry, and can only be changed + within a completion entry finder function. */ +int rl_filename_completion_desired = 0; + +/* Non-zero means that the results of the matches are to be quoted using + double quotes (or an application-specific quoting mechanism) if the + filename contains any characters in rl_filename_quote_chars. This is + ALWAYS non-zero on entry, and can only be changed within a completion + entry finder function. */ +int rl_filename_quoting_desired = 1; + +/* This function, if defined, is called by the completer when real + filename completion is done, after all the matching names have been + generated. It is passed a (char**) known as matches in the code below. + It consists of a NULL-terminated array of pointers to potential + matching strings. The 1st element (matches[0]) is the maximal + substring that is common to all matches. This function can re-arrange + the list of matches as required, but all elements of the array must be + free()'d if they are deleted. The main intent of this function is + to implement FIGNORE a la SunOS csh. */ +rl_compignore_func_t *rl_ignore_some_completions_function = (rl_compignore_func_t *)NULL; + +/* Set to a function to quote a filename in an application-specific fashion. + Called with the text to quote, the type of match found (single or multiple) + and a pointer to the quoting character to be used, which the function can + reset if desired. */ +rl_quote_func_t *rl_filename_quoting_function = rl_quote_filename; + +/* Function to call to remove quoting characters from a filename. Called + before completion is attempted, so the embedded quotes do not interfere + with matching names in the file system. Readline doesn't do anything + with this; it's set only by applications. */ +rl_dequote_func_t *rl_filename_dequoting_function = (rl_dequote_func_t *)NULL; + +/* Function to call to decide whether or not a word break character is + quoted. If a character is quoted, it does not break words for the + completer. */ +rl_linebuf_func_t *rl_char_is_quoted_p = (rl_linebuf_func_t *)NULL; + +/* If non-zero, the completion functions don't append anything except a + possible closing quote. This is set to 0 by rl_complete_internal and + may be changed by an application-specific completion function. */ +int rl_completion_suppress_append = 0; + +/* Character appended to completed words when at the end of the line. The + default is a space. */ +int rl_completion_append_character = ' '; + +/* If non-zero, the completion functions don't append any closing quote. + This is set to 0 by rl_complete_internal and may be changed by an + application-specific completion function. */ +int rl_completion_suppress_quote = 0; + +/* Set to any quote character readline thinks it finds before any application + completion function is called. */ +int rl_completion_quote_character; + +/* Set to a non-zero value if readline found quoting anywhere in the word to + be completed; set before any application completion function is called. */ +int rl_completion_found_quote; + +/* If non-zero, a slash will be appended to completed filenames that are + symbolic links to directory names, subject to the value of the + mark-directories variable (which is user-settable). This exists so + that application completion functions can override the user's preference + (set via the mark-symlinked-directories variable) if appropriate. + It's set to the value of _rl_complete_mark_symlink_dirs in + rl_complete_internal before any application-specific completion + function is called, so without that function doing anything, the user's + preferences are honored. */ +int rl_completion_mark_symlink_dirs; + +/* If non-zero, inhibit completion (temporarily). */ +int rl_inhibit_completion; + +/* Set to the last key used to invoke one of the completion functions */ +int rl_completion_invoking_key; + +/* If non-zero, sort the completion matches. On by default. */ +int rl_sort_completion_matches = 1; + +/* Variables local to this file. */ + +/* Local variable states what happened during the last completion attempt. */ +static int completion_changed_buffer; + +/* The result of the query to the user about displaying completion matches */ +static int completion_y_or_n; + +static int _rl_complete_display_matches_interrupt = 0; + +/*************************************/ +/* */ +/* Bindable completion functions */ +/* */ +/*************************************/ + +/* Complete the word at or before point. You have supplied the function + that does the initial simple matching selection algorithm (see + rl_completion_matches ()). The default is to do filename completion. */ +int +rl_complete (int ignore, int invoking_key) +{ + rl_completion_invoking_key = invoking_key; + + if (rl_inhibit_completion) + return (_rl_insert_char (ignore, invoking_key)); + else if (rl_last_func == rl_complete && !completion_changed_buffer) + return (rl_complete_internal ('?')); + else if (_rl_complete_show_all) + return (rl_complete_internal ('!')); + else if (_rl_complete_show_unmodified) + return (rl_complete_internal ('@')); + else + return (rl_complete_internal (TAB)); +} + +/* List the possible completions. See description of rl_complete (). */ +int +rl_possible_completions (int ignore, int invoking_key) +{ + rl_completion_invoking_key = invoking_key; + return (rl_complete_internal ('?')); +} + +int +rl_insert_completions (int ignore, int invoking_key) +{ + rl_completion_invoking_key = invoking_key; + return (rl_complete_internal ('*')); +} + +/* Return the correct value to pass to rl_complete_internal performing + the same tests as rl_complete. This allows consecutive calls to an + application's completion function to list possible completions and for + an application-specific completion function to honor the + show-all-if-ambiguous readline variable. */ +int +rl_completion_mode (rl_command_func_t *cfunc) +{ + if (rl_last_func == cfunc && !completion_changed_buffer) + return '?'; + else if (_rl_complete_show_all) + return '!'; + else if (_rl_complete_show_unmodified) + return '@'; + else + return TAB; +} + +/************************************/ +/* */ +/* Completion utility functions */ +/* */ +/************************************/ + +/* Reset readline state on a signal or other event. */ +void +_rl_reset_completion_state (void) +{ + rl_completion_found_quote = 0; + rl_completion_quote_character = 0; +} + +static void +_rl_complete_sigcleanup (int sig, void *ptr) +{ + if (sig == SIGINT) /* XXX - for now */ + { + _rl_free_match_list ((char **)ptr); + _rl_complete_display_matches_interrupt = 1; + } +} + +/* Set default values for readline word completion. These are the variables + that application completion functions can change or inspect. */ +static void +set_completion_defaults (int what_to_do) +{ + /* Only the completion entry function can change these. */ + rl_filename_completion_desired = 0; + rl_filename_quoting_desired = 1; + rl_completion_type = what_to_do; + rl_completion_suppress_append = rl_completion_suppress_quote = 0; + rl_completion_append_character = ' '; + + /* The completion entry function may optionally change this. */ + rl_completion_mark_symlink_dirs = _rl_complete_mark_symlink_dirs; + + /* Reset private state. */ + _rl_complete_display_matches_interrupt = 0; +} + +/* The user must press "y" or "n". Non-zero return means "y" pressed. */ +static int +get_y_or_n (int for_pager) +{ + int c; + + /* For now, disable pager in callback mode, until we later convert to state + driven functions. Have to wait until next major version to add new + state definition, since it will change value of RL_STATE_DONE. */ +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + return 1; +#endif + + for (;;) + { + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (c == 'y' || c == 'Y' || c == ' ') + return (1); + if (c == 'n' || c == 'N' || c == RUBOUT) + return (0); + if (c == ABORT_CHAR || c < 0) + _rl_abort_internal (); + if (for_pager && (c == NEWLINE || c == RETURN)) + return (2); + if (for_pager && (c == 'q' || c == 'Q')) + return (0); + rl_ding (); + } +} + +static int +_rl_internal_pager (int lines) +{ + int i; + + fprintf (rl_outstream, "--More--"); + fflush (rl_outstream); + i = get_y_or_n (1); + _rl_erase_entire_line (); + if (i == 0) + return -1; + else if (i == 2) + return (lines - 1); + else + return 0; +} + +static int +path_isdir (const char *filename) +{ + struct stat finfo; + + return (stat (filename, &finfo) == 0 && S_ISDIR (finfo.st_mode)); +} + +#if defined (VISIBLE_STATS) +/* Return the character which best describes FILENAME. + `@' for symbolic links + `/' for directories + `*' for executables + `=' for sockets + `|' for FIFOs + `%' for character special devices + `#' for block special devices */ +static int +stat_char (char *filename) +{ + struct stat finfo; + int character, r; + char *f; + const char *fn; + + /* Short-circuit a //server on cygwin, since that will always behave as + a directory. */ +#if __CYGWIN__ + if (filename[0] == '/' && filename[1] == '/' && strchr (filename+2, '/') == 0) + return '/'; +#endif + + f = 0; + if (rl_filename_stat_hook) + { + f = savestring (filename); + (*rl_filename_stat_hook) (&f); + fn = f; + } + else + fn = filename; + +#if defined (HAVE_LSTAT) && defined (S_ISLNK) + r = lstat (fn, &finfo); +#else + r = stat (fn, &finfo); +#endif + + if (r == -1) + { + xfree (f); + return (0); + } + + character = 0; + if (S_ISDIR (finfo.st_mode)) + character = '/'; +#if defined (S_ISCHR) + else if (S_ISCHR (finfo.st_mode)) + character = '%'; +#endif /* S_ISCHR */ +#if defined (S_ISBLK) + else if (S_ISBLK (finfo.st_mode)) + character = '#'; +#endif /* S_ISBLK */ +#if defined (S_ISLNK) + else if (S_ISLNK (finfo.st_mode)) + character = '@'; +#endif /* S_ISLNK */ +#if defined (S_ISSOCK) + else if (S_ISSOCK (finfo.st_mode)) + character = '='; +#endif /* S_ISSOCK */ +#if defined (S_ISFIFO) + else if (S_ISFIFO (finfo.st_mode)) + character = '|'; +#endif + else if (S_ISREG (finfo.st_mode)) + { +#if defined (_WIN32) && !defined (__CYGWIN__) + char *ext; + + /* Windows doesn't do access and X_OK; check file extension instead */ + ext = strrchr (fn, '.'); + if (ext && (_rl_stricmp (ext, ".exe") == 0 || + _rl_stricmp (ext, ".cmd") == 0 || + _rl_stricmp (ext, ".bat") == 0 || + _rl_stricmp (ext, ".com") == 0)) + character = '*'; +#else + if (access (filename, X_OK) == 0) + character = '*'; +#endif + } + + xfree (f); + return (character); +} +#endif /* VISIBLE_STATS */ + +#if defined (COLOR_SUPPORT) +static int +colored_stat_start (const char *filename) +{ + _rl_set_normal_color (); + return (_rl_print_color_indicator (filename)); +} + +static void +colored_stat_end (void) +{ + _rl_prep_non_filename_text (); + _rl_put_indicator (&_rl_color_indicator[C_CLR_TO_EOL]); +} + +static int +colored_prefix_start (void) +{ + _rl_set_normal_color (); + return (_rl_print_prefix_color ()); +} + +static void +colored_prefix_end (void) +{ + colored_stat_end (); /* for now */ +} +#endif + +/* Return the portion of PATHNAME that should be output when listing + possible completions. If we are hacking filename completion, we + are only interested in the basename, the portion following the + final slash. Otherwise, we return what we were passed. Since + printing empty strings is not very informative, if we're doing + filename completion, and the basename is the empty string, we look + for the previous slash and return the portion following that. If + there's no previous slash, we just return what we were passed. */ +static char * +printable_part (char *pathname) +{ + char *temp, *x; + + if (rl_filename_completion_desired == 0) /* don't need to do anything */ + return (pathname); + + temp = strrchr (pathname, '/'); +#if defined (__MSDOS__) || defined (_WIN32) + if (temp == 0 && ISALPHA ((unsigned char)pathname[0]) && pathname[1] == ':') + temp = pathname + 1; +#endif + + if (temp == 0 || *temp == '\0') + return (pathname); + else if (temp[1] == 0 && temp == pathname) + return (pathname); + /* If the basename is NULL, we might have a pathname like '/usr/src/'. + Look for a previous slash and, if one is found, return the portion + following that slash. If there's no previous slash, just return the + pathname we were passed. */ + else if (temp[1] == '\0') + { + for (x = temp - 1; x > pathname; x--) + if (*x == '/') + break; + return ((*x == '/') ? x + 1 : pathname); + } + else + return ++temp; +} + +/* Compute width of STRING when displayed on screen by print_filename */ +static int +fnwidth (const char *string) +{ + int width, pos; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps; + int left, w; + size_t clen; + wchar_t wc; + + left = strlen (string) + 1; + memset (&ps, 0, sizeof (mbstate_t)); +#endif + + width = pos = 0; + while (string[pos]) + { + if (CTRL_CHAR (string[pos]) || string[pos] == RUBOUT) + { + width += 2; + pos++; + } + else + { +#if defined (HANDLE_MULTIBYTE) + clen = mbrtowc (&wc, string + pos, left - pos, &ps); + if (MB_INVALIDCH (clen)) + { + width++; + pos++; + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (clen)) + break; + else + { + pos += clen; + w = WCWIDTH (wc); + width += (w >= 0) ? w : 1; + } +#else + width++; + pos++; +#endif + } + } + + return width; +} + +#define ELLIPSIS_LEN 3 + +static int +fnprint (const char *to_print, int prefix_bytes, const char *real_pathname) +{ + int printed_len, w; + const char *s; + int common_prefix_len, print_len; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps; + const char *end; + size_t tlen; + int width; + wchar_t wc; + + print_len = strlen (to_print); + end = to_print + print_len + 1; + memset (&ps, 0, sizeof (mbstate_t)); +#else + print_len = strlen (to_print); +#endif + + printed_len = common_prefix_len = 0; + + /* Don't print only the ellipsis if the common prefix is one of the + possible completions. Only cut off prefix_bytes if we're going to be + printing the ellipsis, which takes precedence over coloring the + completion prefix (see print_filename() below). */ + if (_rl_completion_prefix_display_length > 0 && prefix_bytes >= print_len) + prefix_bytes = 0; + +#if defined (COLOR_SUPPORT) + if (_rl_colored_stats && (prefix_bytes == 0 || _rl_colored_completion_prefix <= 0)) + colored_stat_start (real_pathname); +#endif + + if (prefix_bytes && _rl_completion_prefix_display_length > 0) + { + char ellipsis; + + ellipsis = (to_print[prefix_bytes] == '.') ? '_' : '.'; + for (w = 0; w < ELLIPSIS_LEN; w++) + putc (ellipsis, rl_outstream); + printed_len = ELLIPSIS_LEN; + } +#if defined (COLOR_SUPPORT) + else if (prefix_bytes && _rl_colored_completion_prefix > 0) + { + common_prefix_len = prefix_bytes; + prefix_bytes = 0; + /* XXX - print color indicator start here */ + colored_prefix_start (); + } +#endif + + s = to_print + prefix_bytes; + while (*s) + { + if (CTRL_CHAR (*s)) + { + putc ('^', rl_outstream); + putc (UNCTRL (*s), rl_outstream); + printed_len += 2; + s++; +#if defined (HANDLE_MULTIBYTE) + memset (&ps, 0, sizeof (mbstate_t)); +#endif + } + else if (*s == RUBOUT) + { + putc ('^', rl_outstream); + putc ('?', rl_outstream); + printed_len += 2; + s++; +#if defined (HANDLE_MULTIBYTE) + memset (&ps, 0, sizeof (mbstate_t)); +#endif + } + else + { +#if defined (HANDLE_MULTIBYTE) + tlen = mbrtowc (&wc, s, end - s, &ps); + if (MB_INVALIDCH (tlen)) + { + tlen = 1; + width = 1; + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (tlen)) + break; + else + { + w = WCWIDTH (wc); + width = (w >= 0) ? w : 1; + } + fwrite (s, 1, tlen, rl_outstream); + s += tlen; + printed_len += width; +#else + putc (*s, rl_outstream); + s++; + printed_len++; +#endif + } + if (common_prefix_len > 0 && (s - to_print) >= common_prefix_len) + { +#if defined (COLOR_SUPPORT) + /* printed bytes = s - to_print */ + /* printed bytes should never be > but check for paranoia's sake */ + colored_prefix_end (); + if (_rl_colored_stats) + colored_stat_start (real_pathname); /* XXX - experiment */ +#endif + common_prefix_len = 0; + } + } + +#if defined (COLOR_SUPPORT) + /* XXX - unconditional for now */ + if (_rl_colored_stats) + colored_stat_end (); +#endif + + return printed_len; +} + +/* Output TO_PRINT to rl_outstream. If VISIBLE_STATS is defined and we + are using it, check for and output a single character for `special' + filenames. Return the number of characters we output. */ + +static int +print_filename (char *to_print, char *full_pathname, int prefix_bytes) +{ + int printed_len, extension_char, slen, tlen; + char *s, c, *new_full_pathname, *dn; + + extension_char = 0; +#if defined (COLOR_SUPPORT) + /* Defer printing if we want to prefix with a color indicator */ + if (_rl_colored_stats == 0 || rl_filename_completion_desired == 0) +#endif + printed_len = fnprint (to_print, prefix_bytes, to_print); + + if (rl_filename_completion_desired && ( +#if defined (VISIBLE_STATS) + rl_visible_stats || +#endif +#if defined (COLOR_SUPPORT) + _rl_colored_stats || +#endif + _rl_complete_mark_directories)) + { + /* If to_print != full_pathname, to_print is the basename of the + path passed. In this case, we try to expand the directory + name before checking for the stat character. */ + if (to_print != full_pathname) + { + /* Terminate the directory name. */ + c = to_print[-1]; + to_print[-1] = '\0'; + + /* If setting the last slash in full_pathname to a NUL results in + full_pathname being the empty string, we are trying to complete + files in the root directory. If we pass a null string to the + bash directory completion hook, for example, it will expand it + to the current directory. We just want the `/'. */ + if (full_pathname == 0 || *full_pathname == 0) + dn = "/"; + else if (full_pathname[0] != '/') + dn = full_pathname; + else if (full_pathname[1] == 0) + dn = "//"; /* restore trailing slash to `//' */ + else if (full_pathname[1] == '/' && full_pathname[2] == 0) + dn = "/"; /* don't turn /// into // */ + else + dn = full_pathname; + s = tilde_expand (dn); + if (rl_directory_completion_hook) + (*rl_directory_completion_hook) (&s); + + slen = strlen (s); + tlen = strlen (to_print); + new_full_pathname = (char *)xmalloc (slen + tlen + 2); + strcpy (new_full_pathname, s); + if (s[slen - 1] == '/') + slen--; + else + new_full_pathname[slen] = '/'; + strcpy (new_full_pathname + slen + 1, to_print); + +#if defined (VISIBLE_STATS) + if (rl_visible_stats) + extension_char = stat_char (new_full_pathname); + else +#endif + if (_rl_complete_mark_directories) + { + dn = 0; + if (rl_directory_completion_hook == 0 && rl_filename_stat_hook) + { + dn = savestring (new_full_pathname); + (*rl_filename_stat_hook) (&dn); + xfree (new_full_pathname); + new_full_pathname = dn; + } + if (path_isdir (new_full_pathname)) + extension_char = '/'; + } + + /* Move colored-stats code inside fnprint() */ +#if defined (COLOR_SUPPORT) + if (_rl_colored_stats) + printed_len = fnprint (to_print, prefix_bytes, new_full_pathname); +#endif + + xfree (new_full_pathname); + to_print[-1] = c; + } + else + { + s = tilde_expand (full_pathname); +#if defined (VISIBLE_STATS) + if (rl_visible_stats) + extension_char = stat_char (s); + else +#endif + if (_rl_complete_mark_directories && path_isdir (s)) + extension_char = '/'; + + /* Move colored-stats code inside fnprint() */ +#if defined (COLOR_SUPPORT) + if (_rl_colored_stats) + printed_len = fnprint (to_print, prefix_bytes, s); +#endif + } + + xfree (s); + if (extension_char) + { + putc (extension_char, rl_outstream); + printed_len++; + } + } + + return printed_len; +} + +static char * +rl_quote_filename (char *s, int rtype, char *qcp) +{ + char *r; + + r = (char *)xmalloc (strlen (s) + 2); + *r = *rl_completer_quote_characters; + strcpy (r + 1, s); + if (qcp) + *qcp = *rl_completer_quote_characters; + return r; +} + +/* Find the bounds of the current word for completion purposes, and leave + rl_point set to the end of the word. This function skips quoted + substrings (characters between matched pairs of characters in + rl_completer_quote_characters). First we try to find an unclosed + quoted substring on which to do matching. If one is not found, we use + the word break characters to find the boundaries of the current word. + We call an application-specific function to decide whether or not a + particular word break character is quoted; if that function returns a + non-zero result, the character does not break a word. This function + returns the opening quote character if we found an unclosed quoted + substring, '\0' otherwise. FP, if non-null, is set to a value saying + which (shell-like) quote characters we found (single quote, double + quote, or backslash) anywhere in the string. DP, if non-null, is set to + the value of the delimiter character that caused a word break. */ + +char +_rl_find_completion_word (int *fp, int *dp) +{ + int scan, end, found_quote, delimiter, pass_next, isbrk; + char quote_char, *brkchars; + + end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + brkchars = 0; + if (rl_completion_word_break_hook) + brkchars = (*rl_completion_word_break_hook) (); + if (brkchars == 0) + brkchars = rl_completer_word_break_characters; + + if (rl_completer_quote_characters) + { + /* We have a list of characters which can be used in pairs to + quote substrings for the completer. Try to find the start + of an unclosed quoted substring. */ + /* FOUND_QUOTE is set so we know what kind of quotes we found. */ + for (scan = pass_next = 0; scan < end; scan = MB_NEXTCHAR (rl_line_buffer, scan, 1, MB_FIND_ANY)) + { + if (pass_next) + { + pass_next = 0; + continue; + } + + /* Shell-like semantics for single quotes -- don't allow backslash + to quote anything in single quotes, especially not the closing + quote. If you don't like this, take out the check on the value + of quote_char. */ + if (quote_char != '\'' && rl_line_buffer[scan] == '\\') + { + pass_next = 1; + found_quote |= RL_QF_BACKSLASH; + continue; + } + + if (quote_char != '\0') + { + /* Ignore everything until the matching close quote char. */ + if (rl_line_buffer[scan] == quote_char) + { + /* Found matching close. Abandon this substring. */ + quote_char = '\0'; + rl_point = end; + } + } + else if (strchr (rl_completer_quote_characters, rl_line_buffer[scan])) + { + /* Found start of a quoted substring. */ + quote_char = rl_line_buffer[scan]; + rl_point = scan + 1; + /* Shell-like quoting conventions. */ + if (quote_char == '\'') + found_quote |= RL_QF_SINGLE_QUOTE; + else if (quote_char == '"') + found_quote |= RL_QF_DOUBLE_QUOTE; + else + found_quote |= RL_QF_OTHER_QUOTE; + } + } + } + + if (rl_point == end && quote_char == '\0') + { + /* We didn't find an unclosed quoted substring upon which to do + completion, so use the word break characters to find the + substring on which to complete. */ + while (rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_ANY)) + { + scan = rl_line_buffer[rl_point]; + + if (strchr (brkchars, scan) == 0) + continue; + + /* Call the application-specific function to tell us whether + this word break character is quoted and should be skipped. */ + if (rl_char_is_quoted_p && found_quote && + (*rl_char_is_quoted_p) (rl_line_buffer, rl_point)) + continue; + + /* Convoluted code, but it avoids an n^2 algorithm with calls + to char_is_quoted. */ + break; + } + } + + /* If we are at an unquoted word break, then advance past it. */ + scan = rl_line_buffer[rl_point]; + + /* If there is an application-specific function to say whether or not + a character is quoted and we found a quote character, let that + function decide whether or not a character is a word break, even + if it is found in rl_completer_word_break_characters. Don't bother + if we're at the end of the line, though. */ + if (scan) + { + if (rl_char_is_quoted_p) + isbrk = (found_quote == 0 || + (*rl_char_is_quoted_p) (rl_line_buffer, rl_point) == 0) && + strchr (brkchars, scan) != 0; + else + isbrk = strchr (brkchars, scan) != 0; + + if (isbrk) + { + /* If the character that caused the word break was a quoting + character, then remember it as the delimiter. */ + if (rl_basic_quote_characters && + strchr (rl_basic_quote_characters, scan) && + (end - rl_point) > 1) + delimiter = scan; + + /* If the character isn't needed to determine something special + about what kind of completion to perform, then advance past it. */ + if (rl_special_prefixes == 0 || strchr (rl_special_prefixes, scan) == 0) + rl_point++; + } + } + + if (fp) + *fp = found_quote; + if (dp) + *dp = delimiter; + + return (quote_char); +} + +static char ** +gen_completion_matches (char *text, int start, int end, rl_compentry_func_t *our_func, int found_quote, int quote_char) +{ + char **matches; + + rl_completion_found_quote = found_quote; + rl_completion_quote_character = quote_char; + + /* If the user wants to TRY to complete, but then wants to give + up and use the default completion function, they set the + variable rl_attempted_completion_function. */ + if (rl_attempted_completion_function) + { + matches = (*rl_attempted_completion_function) (text, start, end); + if (RL_SIG_RECEIVED()) + { + _rl_free_match_list (matches); + matches = 0; + RL_CHECK_SIGNALS (); + } + + if (matches || rl_attempted_completion_over) + { + rl_attempted_completion_over = 0; + return (matches); + } + } + + /* XXX -- filename dequoting moved into rl_filename_completion_function */ + + /* rl_completion_matches will check for signals as well to avoid a long + delay while reading a directory. */ + matches = rl_completion_matches (text, our_func); + if (RL_SIG_RECEIVED()) + { + _rl_free_match_list (matches); + matches = 0; + RL_CHECK_SIGNALS (); + } + return matches; +} + +/* Filter out duplicates in MATCHES. This frees up the strings in + MATCHES. */ +static char ** +remove_duplicate_matches (char **matches) +{ + char *lowest_common; + int i, j, newlen; + char dead_slot; + char **temp_array; + + /* Sort the items. */ + for (i = 0; matches[i]; i++) + ; + + /* Sort the array without matches[0], since we need it to + stay in place no matter what. */ + if (i && rl_sort_completion_matches) + qsort (matches+1, i-1, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); + + /* Remember the lowest common denominator for it may be unique. */ + lowest_common = savestring (matches[0]); + + for (i = newlen = 0; matches[i + 1]; i++) + { + if (strcmp (matches[i], matches[i + 1]) == 0) + { + xfree (matches[i]); + matches[i] = (char *)&dead_slot; + } + else + newlen++; + } + + /* We have marked all the dead slots with (char *)&dead_slot. + Copy all the non-dead entries into a new array. */ + temp_array = (char **)xmalloc ((3 + newlen) * sizeof (char *)); + for (i = j = 1; matches[i]; i++) + { + if (matches[i] != (char *)&dead_slot) + temp_array[j++] = matches[i]; + } + temp_array[j] = (char *)NULL; + + if (matches[0] != (char *)&dead_slot) + xfree (matches[0]); + + /* Place the lowest common denominator back in [0]. */ + temp_array[0] = lowest_common; + + /* If there is one string left, and it is identical to the + lowest common denominator, then the LCD is the string to + insert. */ + if (j == 2 && strcmp (temp_array[0], temp_array[1]) == 0) + { + xfree (temp_array[1]); + temp_array[1] = (char *)NULL; + } + return (temp_array); +} + +/* Find the common prefix of the list of matches, and put it into + matches[0]. */ +static int +compute_lcd_of_matches (char **match_list, int matches, const char *text) +{ + register int i, c1, c2, si; + int low; /* Count of max-matched characters. */ + int lx; + char *dtext; /* dequoted TEXT, if needed */ +#if defined (HANDLE_MULTIBYTE) + int v; + size_t v1, v2; + mbstate_t ps1, ps2; + wchar_t wc1, wc2; +#endif + + /* If only one match, just use that. Otherwise, compare each + member of the list with the next, finding out where they + stop matching. */ + if (matches == 1) + { + match_list[0] = match_list[1]; + match_list[1] = (char *)NULL; + return 1; + } + + for (i = 1, low = 100000; i < matches; i++) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + memset (&ps1, 0, sizeof (mbstate_t)); + memset (&ps2, 0, sizeof (mbstate_t)); + } +#endif + if (_rl_completion_case_fold) + { + for (si = 0; + (c1 = _rl_to_lower(match_list[i][si])) && + (c2 = _rl_to_lower(match_list[i + 1][si])); + si++) +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + v1 = mbrtowc(&wc1, match_list[i]+si, strlen (match_list[i]+si), &ps1); + v2 = mbrtowc (&wc2, match_list[i+1]+si, strlen (match_list[i+1]+si), &ps2); + if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) + { + if (c1 != c2) /* do byte comparison */ + break; + continue; + } + wc1 = towlower (wc1); + wc2 = towlower (wc2); + if (wc1 != wc2) + break; + else if (v1 > 1) + si += v1 - 1; + } + else +#endif + if (c1 != c2) + break; + } + else + { + for (si = 0; + (c1 = match_list[i][si]) && + (c2 = match_list[i + 1][si]); + si++) +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + mbstate_t ps_back; + ps_back = ps1; + if (!_rl_compare_chars (match_list[i], si, &ps1, match_list[i+1], si, &ps2)) + break; + else if ((v = _rl_get_char_len (&match_list[i][si], &ps_back)) > 1) + si += v - 1; + } + else +#endif + if (c1 != c2) + break; + } + + if (low > si) + low = si; + } + + /* If there were multiple matches, but none matched up to even the + first character, and the user typed something, use that as the + value of matches[0]. */ + if (low == 0 && text && *text) + { + match_list[0] = (char *)xmalloc (strlen (text) + 1); + strcpy (match_list[0], text); + } + else + { + match_list[0] = (char *)xmalloc (low + 1); + + /* XXX - this might need changes in the presence of multibyte chars */ + + /* If we are ignoring case, try to preserve the case of the string + the user typed in the face of multiple matches differing in case. */ + if (_rl_completion_case_fold) + { + /* We're making an assumption here: + IF we're completing filenames AND + the application has defined a filename dequoting function AND + we found a quote character AND + the application has requested filename quoting + THEN + we assume that TEXT was dequoted before checking against + the file system and needs to be dequoted here before we + check against the list of matches + FI */ + dtext = (char *)NULL; + if (rl_filename_completion_desired && + rl_filename_dequoting_function && + rl_completion_found_quote && + rl_filename_quoting_desired) + { + dtext = (*rl_filename_dequoting_function) ((char *)text, rl_completion_quote_character); + text = dtext; + } + + /* sort the list to get consistent answers. */ + if (rl_sort_completion_matches) + qsort (match_list+1, matches, sizeof(char *), (QSFUNC *)_rl_qsort_string_compare); + + si = strlen (text); + lx = (si <= low) ? si : low; /* check shorter of text and matches */ + /* Try to preserve the case of what the user typed in the presence of + multiple matches: check each match for something that matches + what the user typed taking case into account; use it up to common + length of matches if one is found. If not, just use first match. */ + for (i = 1; i <= matches; i++) + if (strncmp (match_list[i], text, lx) == 0) + { + strncpy (match_list[0], match_list[i], low); + break; + } + /* no casematch, use first entry */ + if (i > matches) + strncpy (match_list[0], match_list[1], low); + + FREE (dtext); + } + else + strncpy (match_list[0], match_list[1], low); + + match_list[0][low] = '\0'; + } + + return matches; +} + +static int +postprocess_matches (char ***matchesp, int matching_filenames) +{ + char *t, **matches, **temp_matches; + int nmatch, i; + + matches = *matchesp; + + if (matches == 0) + return 0; + + /* It seems to me that in all the cases we handle we would like + to ignore duplicate possibilities. Scan for the text to + insert being identical to the other completions. */ + if (rl_ignore_completion_duplicates) + { + temp_matches = remove_duplicate_matches (matches); + xfree (matches); + matches = temp_matches; + } + + /* If we are matching filenames, then here is our chance to + do clever processing by re-examining the list. Call the + ignore function with the array as a parameter. It can + munge the array, deleting matches as it desires. */ + if (rl_ignore_some_completions_function && matching_filenames) + { + for (nmatch = 1; matches[nmatch]; nmatch++) + ; + (void)(*rl_ignore_some_completions_function) (matches); + if (matches == 0 || matches[0] == 0) + { + FREE (matches); + *matchesp = (char **)0; + return 0; + } + else + { + /* If we removed some matches, recompute the common prefix. */ + for (i = 1; matches[i]; i++) + ; + if (i > 1 && i < nmatch) + { + t = matches[0]; + compute_lcd_of_matches (matches, i - 1, t); + FREE (t); + } + } + } + + *matchesp = matches; + return (1); +} + +static int +complete_get_screenwidth (void) +{ + int cols; + char *envcols; + + cols = _rl_completion_columns; + if (cols >= 0 && cols <= _rl_screenwidth) + return cols; + envcols = getenv ("COLUMNS"); + if (envcols && *envcols) + cols = atoi (envcols); + if (cols >= 0 && cols <= _rl_screenwidth) + return cols; + return _rl_screenwidth; +} + +/* A convenience function for displaying a list of strings in + columnar format on readline's output stream. MATCHES is the list + of strings, in argv format, LEN is the number of strings in MATCHES, + and MAX is the length of the longest string in MATCHES. */ +void +rl_display_match_list (char **matches, int len, int max) +{ + int count, limit, printed_len, lines, cols; + int i, j, k, l, common_length, sind; + char *temp, *t; + + /* Find the length of the prefix common to all items: length as displayed + characters (common_length) and as a byte index into the matches (sind) */ + common_length = sind = 0; + if (_rl_completion_prefix_display_length > 0) + { + t = printable_part (matches[0]); + /* check again in case of /usr/src/ */ + temp = rl_filename_completion_desired ? strrchr (t, '/') : 0; + common_length = temp ? fnwidth (temp) : fnwidth (t); + sind = temp ? strlen (temp) : strlen (t); + if (common_length > max || sind > max) + common_length = sind = 0; + + if (common_length > _rl_completion_prefix_display_length && common_length > ELLIPSIS_LEN) + max -= common_length - ELLIPSIS_LEN; + else + common_length = sind = 0; + } +#if defined (COLOR_SUPPORT) + else if (_rl_colored_completion_prefix > 0) + { + t = printable_part (matches[0]); + temp = rl_filename_completion_desired ? strrchr (t, '/') : 0; + common_length = temp ? fnwidth (temp) : fnwidth (t); + sind = temp ? RL_STRLEN (temp+1) : RL_STRLEN (t); /* want portion after final slash */ + if (common_length > max || sind > max) + common_length = sind = 0; + } +#endif + + /* How many items of MAX length can we fit in the screen window? */ + cols = complete_get_screenwidth (); + max += 2; + limit = cols / max; + if (limit != 1 && (limit * max == cols)) + limit--; + + /* If cols == 0, limit will end up -1 */ + if (cols < _rl_screenwidth && limit < 0) + limit = 1; + + /* Avoid a possible floating exception. If max > cols, + limit will be 0 and a divide-by-zero fault will result. */ + if (limit == 0) + limit = 1; + + /* How many iterations of the printing loop? */ + count = (len + (limit - 1)) / limit; + + /* Watch out for special case. If LEN is less than LIMIT, then + just do the inner printing loop. + 0 < len <= limit implies count = 1. */ + + /* Sort the items if they are not already sorted. */ + if (rl_ignore_completion_duplicates == 0 && rl_sort_completion_matches) + qsort (matches + 1, len, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); + + rl_crlf (); + + lines = 0; + if (_rl_print_completions_horizontally == 0) + { + /* Print the sorted items, up-and-down alphabetically, like ls. */ + for (i = 1; i <= count; i++) + { + for (j = 0, l = i; j < limit; j++) + { + if (l > len || matches[l] == 0) + break; + else + { + temp = printable_part (matches[l]); + printed_len = print_filename (temp, matches[l], sind); + + if (j + 1 < limit) + { + if (max <= printed_len) + putc (' ', rl_outstream); + else + for (k = 0; k < max - printed_len; k++) + putc (' ', rl_outstream); + } + } + l += count; + } + rl_crlf (); +#if defined (SIGWINCH) + if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0) +#else + if (RL_SIG_RECEIVED ()) +#endif + return; + lines++; + if (_rl_page_completions && lines >= (_rl_screenheight - 1) && i < count) + { + lines = _rl_internal_pager (lines); + if (lines < 0) + return; + } + } + } + else + { + /* Print the sorted items, across alphabetically, like ls -x. */ + for (i = 1; matches[i]; i++) + { + temp = printable_part (matches[i]); + printed_len = print_filename (temp, matches[i], sind); + /* Have we reached the end of this line? */ +#if defined (SIGWINCH) + if (RL_SIG_RECEIVED () && RL_SIGWINCH_RECEIVED() == 0) +#else + if (RL_SIG_RECEIVED ()) +#endif + return; + if (matches[i+1]) + { + if (limit == 1 || (i && (limit > 1) && (i % limit) == 0)) + { + rl_crlf (); + lines++; + if (_rl_page_completions && lines >= _rl_screenheight - 1) + { + lines = _rl_internal_pager (lines); + if (lines < 0) + return; + } + } + else if (max <= printed_len) + putc (' ', rl_outstream); + else + for (k = 0; k < max - printed_len; k++) + putc (' ', rl_outstream); + } + } + rl_crlf (); + } +} + +/* Display MATCHES, a list of matching filenames in argv format. This + handles the simple case -- a single match -- first. If there is more + than one match, we compute the number of strings in the list and the + length of the longest string, which will be needed by the display + function. If the application wants to handle displaying the list of + matches itself, it sets RL_COMPLETION_DISPLAY_MATCHES_HOOK to the + address of a function, and we just call it. If we're handling the + display ourselves, we just call rl_display_match_list. We also check + that the list of matches doesn't exceed the user-settable threshold, + and ask the user if he wants to see the list if there are more matches + than RL_COMPLETION_QUERY_ITEMS. */ +static void +display_matches (char **matches) +{ + int len, max, i; + char *temp; + + /* Move to the last visible line of a possibly-multiple-line command. */ + _rl_move_vert (_rl_vis_botlin); + + /* Handle simple case first. What if there is only one answer? */ + if (matches[1] == 0) + { + temp = printable_part (matches[0]); + rl_crlf (); + print_filename (temp, matches[0], 0); + rl_crlf (); + + rl_forced_update_display (); + rl_display_fixed = 1; + + return; + } + + /* There is more than one answer. Find out how many there are, + and find the maximum printed length of a single entry. */ + for (max = 0, i = 1; matches[i]; i++) + { + temp = printable_part (matches[i]); + len = fnwidth (temp); + + if (len > max) + max = len; + } + + len = i - 1; + + /* If the caller has defined a display hook, then call that now. */ + if (rl_completion_display_matches_hook) + { + (*rl_completion_display_matches_hook) (matches, len, max); + return; + } + + /* If there are many items, then ask the user if she really wants to + see them all. */ + if (rl_completion_query_items > 0 && len >= rl_completion_query_items) + { + rl_crlf (); + fprintf (rl_outstream, "Display all %d possibilities? (y or n)", len); + fflush (rl_outstream); + if ((completion_y_or_n = get_y_or_n (0)) == 0) + { + rl_crlf (); + + rl_forced_update_display (); + rl_display_fixed = 1; + + return; + } + } + + rl_display_match_list (matches, len, max); + + rl_forced_update_display (); + rl_display_fixed = 1; +} + +/* qc == pointer to quoting character, if any */ +static char * +make_quoted_replacement (char *match, int mtype, char *qc) +{ + int should_quote, do_replace; + char *replacement; + + /* If we are doing completion on quoted substrings, and any matches + contain any of the completer_word_break_characters, then auto- + matically prepend the substring with a quote character (just pick + the first one from the list of such) if it does not already begin + with a quote string. FIXME: Need to remove any such automatically + inserted quote character when it no longer is necessary, such as + if we change the string we are completing on and the new set of + matches don't require a quoted substring. */ + replacement = match; + + should_quote = match && rl_completer_quote_characters && + rl_filename_completion_desired && + rl_filename_quoting_desired; + + if (should_quote) + should_quote = should_quote && (!qc || !*qc || + (rl_completer_quote_characters && strchr (rl_completer_quote_characters, *qc))); + + if (should_quote) + { + /* If there is a single match, see if we need to quote it. + This also checks whether the common prefix of several + matches needs to be quoted. */ + should_quote = rl_filename_quote_characters + ? (_rl_strpbrk (match, rl_filename_quote_characters) != 0) + : 0; + + do_replace = should_quote ? mtype : NO_MATCH; + /* Quote the replacement, since we found an embedded + word break character in a potential match. */ + if (do_replace != NO_MATCH && rl_filename_quoting_function) + replacement = (*rl_filename_quoting_function) (match, do_replace, qc); + } + return (replacement); +} + +static void +insert_match (char *match, int start, int mtype, char *qc) +{ + char *replacement, *r; + char oqc; + int end, rlen; + + oqc = qc ? *qc : '\0'; + replacement = make_quoted_replacement (match, mtype, qc); + + /* Now insert the match. */ + if (replacement) + { + rlen = strlen (replacement); + /* Don't double an opening quote character. */ + if (qc && *qc && start && rl_line_buffer[start - 1] == *qc && + replacement[0] == *qc) + start--; + /* If make_quoted_replacement changed the quoting character, remove + the opening quote and insert the (fully-quoted) replacement. */ + else if (qc && (*qc != oqc) && start && rl_line_buffer[start - 1] == oqc && + replacement[0] != oqc) + start--; + end = rl_point - 1; + /* Don't double a closing quote character */ + if (qc && *qc && end && rl_line_buffer[rl_point] == *qc && replacement[rlen - 1] == *qc) + end++; + if (_rl_skip_completed_text) + { + r = replacement; + while (start < rl_end && *r && rl_line_buffer[start] == *r) + { + start++; + r++; + } + if (start <= end || *r) + _rl_replace_text (r, start, end); + rl_point = start + strlen (r); + } + else + _rl_replace_text (replacement, start, end); + if (replacement != match) + xfree (replacement); + } +} + +/* Append any necessary closing quote and a separator character to the + just-inserted match. If the user has specified that directories + should be marked by a trailing `/', append one of those instead. The + default trailing character is a space. Returns the number of characters + appended. If NONTRIVIAL_MATCH is set, we test for a symlink (if the OS + has them) and don't add a suffix for a symlink to a directory. A + nontrivial match is one that actually adds to the word being completed. + The variable rl_completion_mark_symlink_dirs controls this behavior + (it's initially set to the what the user has chosen, indicated by the + value of _rl_complete_mark_symlink_dirs, but may be modified by an + application's completion function). */ +static int +append_to_match (char *text, int delimiter, int quote_char, int nontrivial_match) +{ + char temp_string[4], *filename, *fn; + int temp_string_index, s; + struct stat finfo; + + temp_string_index = 0; + if (quote_char && rl_point && rl_completion_suppress_quote == 0 && + rl_line_buffer[rl_point - 1] != quote_char) + temp_string[temp_string_index++] = quote_char; + + if (delimiter) + temp_string[temp_string_index++] = delimiter; + else if (rl_completion_suppress_append == 0 && rl_completion_append_character) + temp_string[temp_string_index++] = rl_completion_append_character; + + temp_string[temp_string_index++] = '\0'; + + if (rl_filename_completion_desired) + { + filename = tilde_expand (text); + if (rl_filename_stat_hook) + { + fn = savestring (filename); + (*rl_filename_stat_hook) (&fn); + xfree (filename); + filename = fn; + } + s = (nontrivial_match && rl_completion_mark_symlink_dirs == 0) + ? LSTAT (filename, &finfo) + : stat (filename, &finfo); + if (s == 0 && S_ISDIR (finfo.st_mode)) + { + if (_rl_complete_mark_directories /* && rl_completion_suppress_append == 0 */) + { + /* This is clumsy. Avoid putting in a double slash if point + is at the end of the line and the previous character is a + slash. */ + if (rl_point && rl_line_buffer[rl_point] == '\0' && rl_line_buffer[rl_point - 1] == '/') + ; + else if (rl_line_buffer[rl_point] != '/') + rl_insert_text ("/"); + } + } +#ifdef S_ISLNK + /* Don't add anything if the filename is a symlink and resolves to a + directory. */ + else if (s == 0 && S_ISLNK (finfo.st_mode) && path_isdir (filename)) + ; +#endif + else + { + if (rl_point == rl_end && temp_string_index) + rl_insert_text (temp_string); + } + xfree (filename); + } + else + { + if (rl_point == rl_end && temp_string_index) + rl_insert_text (temp_string); + } + + return (temp_string_index); +} + +static void +insert_all_matches (char **matches, int point, char *qc) +{ + int i; + char *rp; + + rl_begin_undo_group (); + /* remove any opening quote character; make_quoted_replacement will add + it back. */ + if (qc && *qc && point && rl_line_buffer[point - 1] == *qc) + point--; + rl_delete_text (point, rl_point); + rl_point = point; + + if (matches[1]) + { + for (i = 1; matches[i]; i++) + { + rp = make_quoted_replacement (matches[i], SINGLE_MATCH, qc); + rl_insert_text (rp); + rl_insert_text (" "); + if (rp != matches[i]) + xfree (rp); + } + } + else + { + rp = make_quoted_replacement (matches[0], SINGLE_MATCH, qc); + rl_insert_text (rp); + rl_insert_text (" "); + if (rp != matches[0]) + xfree (rp); + } + rl_end_undo_group (); +} + +void +_rl_free_match_list (char **matches) +{ + register int i; + + if (matches == 0) + return; + + for (i = 0; matches[i]; i++) + xfree (matches[i]); + xfree (matches); +} + +/* Complete the word at or before point. + WHAT_TO_DO says what to do with the completion. + `?' means list the possible completions. + TAB means do standard completion. + `*' means insert all of the possible completions. + `!' means to do standard completion, and list all possible completions if + there is more than one. + `@' means to do standard completion, and list all possible completions if + there is more than one and partial completion is not possible. */ +int +rl_complete_internal (int what_to_do) +{ + char **matches; + rl_compentry_func_t *our_func; + int start, end, delimiter, found_quote, i, nontrivial_lcd; + char *text, *saved_line_buffer; + char quote_char; + int tlen, mlen; + + RL_SETSTATE(RL_STATE_COMPLETING); + + set_completion_defaults (what_to_do); + + saved_line_buffer = rl_line_buffer ? savestring (rl_line_buffer) : (char *)NULL; + our_func = rl_completion_entry_function + ? rl_completion_entry_function + : rl_filename_completion_function; + /* We now look backwards for the start of a filename/variable word. */ + end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_point) + /* This (possibly) changes rl_point. If it returns a non-zero char, + we know we have an open quote. */ + quote_char = _rl_find_completion_word (&found_quote, &delimiter); + + start = rl_point; + rl_point = end; + + text = rl_copy_text (start, end); + matches = gen_completion_matches (text, start, end, our_func, found_quote, quote_char); + /* nontrivial_lcd is set if the common prefix adds something to the word + being completed. */ + nontrivial_lcd = matches && strcmp (text, matches[0]) != 0; + if (what_to_do == '!' || what_to_do == '@') + tlen = strlen (text); + xfree (text); + + if (matches == 0) + { + rl_ding (); + FREE (saved_line_buffer); + completion_changed_buffer = 0; + RL_UNSETSTATE(RL_STATE_COMPLETING); + _rl_reset_completion_state (); + return (0); + } + + /* If we are matching filenames, the attempted completion function will + have set rl_filename_completion_desired to a non-zero value. The basic + rl_filename_completion_function does this. */ + i = rl_filename_completion_desired; + + if (postprocess_matches (&matches, i) == 0) + { + rl_ding (); + FREE (saved_line_buffer); + completion_changed_buffer = 0; + RL_UNSETSTATE(RL_STATE_COMPLETING); + _rl_reset_completion_state (); + return (0); + } + + switch (what_to_do) + { + case TAB: + case '!': + case '@': + /* Insert the first match with proper quoting. */ + if (what_to_do == TAB) + { + if (*matches[0]) + insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); + } + else if (*matches[0] && matches[1] == 0) + /* should we perform the check only if there are multiple matches? */ + insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); + else if (*matches[0]) /* what_to_do != TAB && multiple matches */ + { + mlen = *matches[0] ? strlen (matches[0]) : 0; + if (mlen >= tlen) + insert_match (matches[0], start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); + } + + /* If there are more matches, ring the bell to indicate. + If we are in vi mode, Posix.2 says to not ring the bell. + If the `show-all-if-ambiguous' variable is set, display + all the matches immediately. Otherwise, if this was the + only match, and we are hacking files, check the file to + see if it was a directory. If so, and the `mark-directories' + variable is set, add a '/' to the name. If not, and we + are at the end of the line, then add a space. */ + if (matches[1]) + { + if (what_to_do == '!') + { + display_matches (matches); + break; + } + else if (what_to_do == '@') + { + if (nontrivial_lcd == 0) + display_matches (matches); + break; + } + else if (rl_editing_mode != vi_mode) + rl_ding (); /* There are other matches remaining. */ + } + else + append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd); + + break; + + case '*': + insert_all_matches (matches, start, "e_char); + break; + + case '?': + if (rl_completion_display_matches_hook == 0) + { + _rl_sigcleanup = _rl_complete_sigcleanup; + _rl_sigcleanarg = matches; + _rl_complete_display_matches_interrupt = 0; + } + display_matches (matches); + if (_rl_complete_display_matches_interrupt) + { + matches = 0; /* already freed by rl_complete_sigcleanup */ + _rl_complete_display_matches_interrupt = 0; + if (rl_signal_event_hook) + (*rl_signal_event_hook) (); /* XXX */ + } + _rl_sigcleanup = 0; + _rl_sigcleanarg = 0; + break; + + default: + _rl_ttymsg ("bad value %d for what_to_do in rl_complete", what_to_do); + rl_ding (); + FREE (saved_line_buffer); + RL_UNSETSTATE(RL_STATE_COMPLETING); + _rl_free_match_list (matches); + _rl_reset_completion_state (); + return 1; + } + + _rl_free_match_list (matches); + + /* Check to see if the line has changed through all of this manipulation. */ + if (saved_line_buffer) + { + completion_changed_buffer = strcmp (rl_line_buffer, saved_line_buffer) != 0; + xfree (saved_line_buffer); + } + + RL_UNSETSTATE(RL_STATE_COMPLETING); + _rl_reset_completion_state (); + + RL_CHECK_SIGNALS (); + return 0; +} + +/***************************************************************/ +/* */ +/* Application-callable completion match generator functions */ +/* */ +/***************************************************************/ + +/* Return an array of (char *) which is a list of completions for TEXT. + If there are no completions, return a NULL pointer. + The first entry in the returned array is the substitution for TEXT. + The remaining entries are the possible completions. + The array is terminated with a NULL pointer. + + ENTRY_FUNCTION is a function of two args, and returns a (char *). + The first argument is TEXT. + The second is a state argument; it should be zero on the first call, and + non-zero on subsequent calls. It returns a NULL pointer to the caller + when there are no more matches. + */ +char ** +rl_completion_matches (const char *text, rl_compentry_func_t *entry_function) +{ + register int i; + + /* Number of slots in match_list. */ + int match_list_size; + + /* The list of matches. */ + char **match_list; + + /* Number of matches actually found. */ + int matches; + + /* Temporary string binder. */ + char *string; + + matches = 0; + match_list_size = 10; + match_list = (char **)xmalloc ((match_list_size + 1) * sizeof (char *)); + match_list[1] = (char *)NULL; + + while (string = (*entry_function) (text, matches)) + { + if (RL_SIG_RECEIVED ()) + { + /* Start at 1 because we don't set matches[0] in this function. + Only free the list members if we're building match list from + rl_filename_completion_function, since we know that doesn't + free the strings it returns. */ + if (entry_function == rl_filename_completion_function) + { + for (i = 1; match_list[i]; i++) + xfree (match_list[i]); + } + xfree (match_list); + match_list = 0; + match_list_size = 0; + matches = 0; + RL_CHECK_SIGNALS (); + } + + if (matches + 1 >= match_list_size) + match_list = (char **)xrealloc + (match_list, ((match_list_size += 10) + 1) * sizeof (char *)); + + if (match_list == 0) + return (match_list); + + match_list[++matches] = string; + match_list[matches + 1] = (char *)NULL; + } + + /* If there were any matches, then look through them finding out the + lowest common denominator. That then becomes match_list[0]. */ + if (matches) + compute_lcd_of_matches (match_list, matches, text); + else /* There were no matches. */ + { + xfree (match_list); + match_list = (char **)NULL; + } + return (match_list); +} + +/* A completion function for usernames. + TEXT contains a partial username preceded by a random + character (usually `~'). */ +char * +rl_username_completion_function (const char *text, int state) +{ +#if defined (__WIN32__) || defined (__OPENNT) + return (char *)NULL; +#else /* !__WIN32__ && !__OPENNT) */ + static char *username = (char *)NULL; + static struct passwd *entry; + static int namelen, first_char, first_char_loc; + char *value; + + if (state == 0) + { + FREE (username); + + first_char = *text; + first_char_loc = first_char == '~'; + + username = savestring (&text[first_char_loc]); + namelen = strlen (username); +#if defined (HAVE_GETPWENT) + setpwent (); +#endif + } + +#if defined (HAVE_GETPWENT) + while (entry = getpwent ()) + { + /* Null usernames should result in all users as possible completions. */ + if (namelen == 0 || (STREQN (username, entry->pw_name, namelen))) + break; + } +#endif + + if (entry == 0) + { +#if defined (HAVE_GETPWENT) + endpwent (); +#endif + return ((char *)NULL); + } + else + { + value = (char *)xmalloc (2 + strlen (entry->pw_name)); + + *value = *text; + + strcpy (value + first_char_loc, entry->pw_name); + + if (first_char == '~') + rl_filename_completion_desired = 1; + + return (value); + } +#endif /* !__WIN32__ && !__OPENNT */ +} + +/* Return non-zero if CONVFN matches FILENAME up to the length of FILENAME + (FILENAME_LEN). If _rl_completion_case_fold is set, compare without + regard to the alphabetic case of characters. If + _rl_completion_case_map is set, make `-' and `_' equivalent. CONVFN is + the possibly-converted directory entry; FILENAME is what the user typed. */ +static int +complete_fncmp (const char *convfn, int convlen, const char *filename, int filename_len) +{ + register char *s1, *s2; + int d, len; +#if defined (HANDLE_MULTIBYTE) + size_t v1, v2; + mbstate_t ps1, ps2; + wchar_t wc1, wc2; +#endif + +#if defined (HANDLE_MULTIBYTE) + memset (&ps1, 0, sizeof (mbstate_t)); + memset (&ps2, 0, sizeof (mbstate_t)); +#endif + + if (filename_len == 0) + return 1; + if (convlen < filename_len) + return 0; + + len = filename_len; + s1 = (char *)convfn; + s2 = (char *)filename; + + /* Otherwise, if these match up to the length of filename, then + it is a match. */ + if (_rl_completion_case_fold && _rl_completion_case_map) + { + /* Case-insensitive comparison treating _ and - as equivalent */ +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + do + { + v1 = mbrtowc (&wc1, s1, convlen, &ps1); + v2 = mbrtowc (&wc2, s2, filename_len, &ps2); + if (v1 == 0 && v2 == 0) + return 1; + else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) + { + if (*s1 != *s2) /* do byte comparison */ + return 0; + else if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_')) + return 0; + s1++; s2++; len--; + continue; + } + wc1 = towlower (wc1); + wc2 = towlower (wc2); + s1 += v1; + s2 += v1; + len -= v1; + if ((wc1 == L'-' || wc1 == L'_') && (wc2 == L'-' || wc2 == L'_')) + continue; + if (wc1 != wc2) + return 0; + } + while (len != 0); + } + else +#endif + { + do + { + d = _rl_to_lower (*s1) - _rl_to_lower (*s2); + /* *s1 == [-_] && *s2 == [-_] */ + if ((*s1 == '-' || *s1 == '_') && (*s2 == '-' || *s2 == '_')) + d = 0; + if (d != 0) + return 0; + s1++; s2++; /* already checked convlen >= filename_len */ + } + while (--len != 0); + } + + return 1; + } + else if (_rl_completion_case_fold) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + do + { + v1 = mbrtowc (&wc1, s1, convlen, &ps1); + v2 = mbrtowc (&wc2, s2, filename_len, &ps2); + if (v1 == 0 && v2 == 0) + return 1; + else if (MB_INVALIDCH (v1) || MB_INVALIDCH (v2)) + { + if (*s1 != *s2) /* do byte comparison */ + return 0; + s1++; s2++; len--; + continue; + } + wc1 = towlower (wc1); + wc2 = towlower (wc2); + if (wc1 != wc2) + return 0; + s1 += v1; + s2 += v1; + len -= v1; + } + while (len != 0); + return 1; + } + else +#endif + if ((_rl_to_lower (convfn[0]) == _rl_to_lower (filename[0])) && + (convlen >= filename_len) && + (_rl_strnicmp (filename, convfn, filename_len) == 0)) + return 1; + } + else + { + if ((convfn[0] == filename[0]) && + (convlen >= filename_len) && + (strncmp (filename, convfn, filename_len) == 0)) + return 1; + } + return 0; +} + +/* Okay, now we write the entry_function for filename completion. In the + general case. Note that completion in the shell is a little different + because of all the pathnames that must be followed when looking up the + completion for a command. */ +char * +rl_filename_completion_function (const char *text, int state) +{ + static DIR *directory = (DIR *)NULL; + static char *filename = (char *)NULL; + static char *dirname = (char *)NULL; + static char *users_dirname = (char *)NULL; + static int filename_len; + char *temp, *dentry, *convfn; + int dirlen, dentlen, convlen; + int tilde_dirname; + struct dirent *entry; + + /* If we don't have any state, then do some initialization. */ + if (state == 0) + { + /* If we were interrupted before closing the directory or reading + all of its contents, close it. */ + if (directory) + { + closedir (directory); + directory = (DIR *)NULL; + } + FREE (dirname); + FREE (filename); + FREE (users_dirname); + + filename = savestring (text); + if (*text == 0) + text = "."; + dirname = savestring (text); + + temp = strrchr (dirname, '/'); + +#if defined (__MSDOS__) || defined (_WIN32) + /* special hack for //X/... */ + if (dirname[0] == '/' && dirname[1] == '/' && ISALPHA ((unsigned char)dirname[2]) && dirname[3] == '/') + temp = strrchr (dirname + 3, '/'); +#endif + + if (temp) + { + strcpy (filename, ++temp); + *temp = '\0'; + } +#if defined (__MSDOS__) || (defined (_WIN32) && !defined (__CYGWIN__)) + /* searches from current directory on the drive */ + else if (ISALPHA ((unsigned char)dirname[0]) && dirname[1] == ':') + { + strcpy (filename, dirname + 2); + dirname[2] = '\0'; + } +#endif + else + { + dirname[0] = '.'; + dirname[1] = '\0'; + } + + /* We aren't done yet. We also support the "~user" syntax. */ + + /* Save the version of the directory that the user typed, dequoting + it if necessary. */ + if (rl_completion_found_quote && rl_filename_dequoting_function) + users_dirname = (*rl_filename_dequoting_function) (dirname, rl_completion_quote_character); + else + users_dirname = savestring (dirname); + + tilde_dirname = 0; + if (*dirname == '~') + { + temp = tilde_expand (dirname); + xfree (dirname); + dirname = temp; + tilde_dirname = 1; + } + + /* We have saved the possibly-dequoted version of the directory name + the user typed. Now transform the directory name we're going to + pass to opendir(2). The directory rewrite hook modifies only the + directory name; the directory completion hook modifies both the + directory name passed to opendir(2) and the version the user + typed. Both the directory completion and rewrite hooks should perform + any necessary dequoting. The hook functions return 1 if they modify + the directory name argument. If either hook returns 0, it should + not modify the directory name pointer passed as an argument. */ + if (rl_directory_rewrite_hook) + (*rl_directory_rewrite_hook) (&dirname); + else if (rl_directory_completion_hook && (*rl_directory_completion_hook) (&dirname)) + { + xfree (users_dirname); + users_dirname = savestring (dirname); + } + else if (tilde_dirname == 0 && rl_completion_found_quote && rl_filename_dequoting_function) + { + /* delete single and double quotes */ + xfree (dirname); + dirname = savestring (users_dirname); + } + directory = opendir (dirname); + + /* Now dequote a non-null filename. FILENAME will not be NULL, but may + be empty. */ + if (*filename && rl_completion_found_quote && rl_filename_dequoting_function) + { + /* delete single and double quotes */ + temp = (*rl_filename_dequoting_function) (filename, rl_completion_quote_character); + xfree (filename); + filename = temp; + } + filename_len = strlen (filename); + + rl_filename_completion_desired = 1; + } + + /* At this point we should entertain the possibility of hacking wildcarded + filenames, like /usr/man/man/te. If the directory name + contains globbing characters, then build an array of directories, and + then map over that list while completing. */ + /* *** UNIMPLEMENTED *** */ + + /* Now that we have some state, we can read the directory. */ + + entry = (struct dirent *)NULL; + while (directory && (entry = readdir (directory))) + { + convfn = dentry = entry->d_name; + convlen = dentlen = D_NAMLEN (entry); + + if (rl_filename_rewrite_hook) + { + convfn = (*rl_filename_rewrite_hook) (dentry, dentlen); + convlen = (convfn == dentry) ? dentlen : strlen (convfn); + } + + /* Special case for no filename. If the user has disabled the + `match-hidden-files' variable, skip filenames beginning with `.'. + All other entries except "." and ".." match. */ + if (filename_len == 0) + { + if (_rl_match_hidden_files == 0 && HIDDEN_FILE (convfn)) + continue; + + if (convfn[0] != '.' || + (convfn[1] && (convfn[1] != '.' || convfn[2]))) + break; + } + else + { + if (complete_fncmp (convfn, convlen, filename, filename_len)) + break; + } + } + + if (entry == 0) + { + if (directory) + { + closedir (directory); + directory = (DIR *)NULL; + } + if (dirname) + { + xfree (dirname); + dirname = (char *)NULL; + } + if (filename) + { + xfree (filename); + filename = (char *)NULL; + } + if (users_dirname) + { + xfree (users_dirname); + users_dirname = (char *)NULL; + } + + return (char *)NULL; + } + else + { + /* dirname && (strcmp (dirname, ".") != 0) */ + if (dirname && (dirname[0] != '.' || dirname[1])) + { + if (rl_complete_with_tilde_expansion && *users_dirname == '~') + { + dirlen = strlen (dirname); + temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry)); + strcpy (temp, dirname); + /* Canonicalization cuts off any final slash present. We + may need to add it back. */ + if (dirname[dirlen - 1] != '/') + { + temp[dirlen++] = '/'; + temp[dirlen] = '\0'; + } + } + else + { + dirlen = strlen (users_dirname); + temp = (char *)xmalloc (2 + dirlen + D_NAMLEN (entry)); + strcpy (temp, users_dirname); + /* Make sure that temp has a trailing slash here. */ + if (users_dirname[dirlen - 1] != '/') + temp[dirlen++] = '/'; + } + + strcpy (temp + dirlen, convfn); + } + else + temp = savestring (convfn); + + if (convfn != dentry) + xfree (convfn); + + return (temp); + } +} + +/* An initial implementation of a menu completion function a la tcsh. The + first time (if the last readline command was not rl_old_menu_complete), we + generate the list of matches. This code is very similar to the code in + rl_complete_internal -- there should be a way to combine the two. Then, + for each item in the list of matches, we insert the match in an undoable + fashion, with the appropriate character appended (this happens on the + second and subsequent consecutive calls to rl_old_menu_complete). When we + hit the end of the match list, we restore the original unmatched text, + ring the bell, and reset the counter to zero. */ +int +rl_old_menu_complete (int count, int invoking_key) +{ + rl_compentry_func_t *our_func; + int matching_filenames, found_quote; + + static char *orig_text; + static char **matches = (char **)0; + static int match_list_index = 0; + static int match_list_size = 0; + static int orig_start, orig_end; + static char quote_char; + static int delimiter; + + /* The first time through, we generate the list of matches and set things + up to insert them. */ + if (rl_last_func != rl_old_menu_complete) + { + /* Clean up from previous call, if any. */ + FREE (orig_text); + if (matches) + _rl_free_match_list (matches); + + match_list_index = match_list_size = 0; + matches = (char **)NULL; + + rl_completion_invoking_key = invoking_key; + + RL_SETSTATE(RL_STATE_COMPLETING); + + /* Only the completion entry function can change these. */ + set_completion_defaults ('%'); + + our_func = rl_menu_completion_entry_function; + if (our_func == 0) + our_func = rl_completion_entry_function + ? rl_completion_entry_function + : rl_filename_completion_function; + + /* We now look backwards for the start of a filename/variable word. */ + orig_end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_point) + /* This (possibly) changes rl_point. If it returns a non-zero char, + we know we have an open quote. */ + quote_char = _rl_find_completion_word (&found_quote, &delimiter); + + orig_start = rl_point; + rl_point = orig_end; + + orig_text = rl_copy_text (orig_start, orig_end); + matches = gen_completion_matches (orig_text, orig_start, orig_end, + our_func, found_quote, quote_char); + + /* If we are matching filenames, the attempted completion function will + have set rl_filename_completion_desired to a non-zero value. The basic + rl_filename_completion_function does this. */ + matching_filenames = rl_filename_completion_desired; + + if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + FREE (orig_text); + orig_text = (char *)0; + completion_changed_buffer = 0; + RL_UNSETSTATE(RL_STATE_COMPLETING); + return (0); + } + + RL_UNSETSTATE(RL_STATE_COMPLETING); + + for (match_list_size = 0; matches[match_list_size]; match_list_size++) + ; + /* matches[0] is lcd if match_list_size > 1, but the circular buffer + code below should take care of it. */ + + if (match_list_size > 1 && _rl_complete_show_all) + display_matches (matches); + } + + /* Now we have the list of matches. Replace the text between + rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with + matches[match_list_index], and add any necessary closing char. */ + + if (matches == 0 || match_list_size == 0) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + completion_changed_buffer = 0; + return (0); + } + + match_list_index += count; + if (match_list_index < 0) + { + while (match_list_index < 0) + match_list_index += match_list_size; + } + else + match_list_index %= match_list_size; + + if (match_list_index == 0 && match_list_size > 1) + { + rl_ding (); + insert_match (orig_text, orig_start, MULT_MATCH, "e_char); + } + else + { + insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, "e_char); + append_to_match (matches[match_list_index], delimiter, quote_char, + strcmp (orig_text, matches[match_list_index])); + } + + completion_changed_buffer = 1; + return (0); +} + +/* The current version of menu completion. + The differences between this function and the original are: + +1. It honors the maximum number of completions variable (completion-query-items) +2. It appends to the word as usual if there is only one match +3. It displays the common prefix if there is one, and makes it the first menu + choice if the menu-complete-display-prefix option is enabled +*/ + +int +rl_menu_complete (int count, int ignore) +{ + rl_compentry_func_t *our_func; + int matching_filenames, found_quote; + + static char *orig_text; + static char **matches = (char **)0; + static int match_list_index = 0; + static int match_list_size = 0; + static int nontrivial_lcd = 0; + static int full_completion = 0; /* set to 1 if menu completion should reinitialize on next call */ + static int orig_start, orig_end; + static char quote_char; + static int delimiter, cstate; + + /* The first time through, we generate the list of matches and set things + up to insert them. */ + if ((rl_last_func != rl_menu_complete && rl_last_func != rl_backward_menu_complete) || full_completion) + { + /* Clean up from previous call, if any. */ + FREE (orig_text); + if (matches) + _rl_free_match_list (matches); + + match_list_index = match_list_size = 0; + matches = (char **)NULL; + + full_completion = 0; + + RL_SETSTATE(RL_STATE_COMPLETING); + + /* Only the completion entry function can change these. */ + set_completion_defaults ('%'); + + our_func = rl_menu_completion_entry_function; + if (our_func == 0) + our_func = rl_completion_entry_function + ? rl_completion_entry_function + : rl_filename_completion_function; + + /* We now look backwards for the start of a filename/variable word. */ + orig_end = rl_point; + found_quote = delimiter = 0; + quote_char = '\0'; + + if (rl_point) + /* This (possibly) changes rl_point. If it returns a non-zero char, + we know we have an open quote. */ + quote_char = _rl_find_completion_word (&found_quote, &delimiter); + + orig_start = rl_point; + rl_point = orig_end; + + orig_text = rl_copy_text (orig_start, orig_end); + matches = gen_completion_matches (orig_text, orig_start, orig_end, + our_func, found_quote, quote_char); + + nontrivial_lcd = matches && strcmp (orig_text, matches[0]) != 0; + + /* If we are matching filenames, the attempted completion function will + have set rl_filename_completion_desired to a non-zero value. The basic + rl_filename_completion_function does this. */ + matching_filenames = rl_filename_completion_desired; + + if (matches == 0 || postprocess_matches (&matches, matching_filenames) == 0) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + FREE (orig_text); + orig_text = (char *)0; + completion_changed_buffer = 0; + RL_UNSETSTATE(RL_STATE_COMPLETING); + return (0); + } + + RL_UNSETSTATE(RL_STATE_COMPLETING); + + for (match_list_size = 0; matches[match_list_size]; match_list_size++) + ; + + if (match_list_size == 0) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + match_list_index = 0; + completion_changed_buffer = 0; + return (0); + } + + /* matches[0] is lcd if match_list_size > 1, but the circular buffer + code below should take care of it. */ + if (*matches[0]) + { + insert_match (matches[0], orig_start, matches[1] ? MULT_MATCH : SINGLE_MATCH, "e_char); + orig_end = orig_start + strlen (matches[0]); + completion_changed_buffer = STREQ (orig_text, matches[0]) == 0; + } + + if (match_list_size > 1 && _rl_complete_show_all) + { + display_matches (matches); + /* If there are so many matches that the user has to be asked + whether or not he wants to see the matches, menu completion + is unwieldy. */ + if (rl_completion_query_items > 0 && match_list_size >= rl_completion_query_items) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + full_completion = 1; + return (0); + } + else if (_rl_menu_complete_prefix_first) + { + rl_ding (); + return (0); + } + } + else if (match_list_size <= 1) + { + append_to_match (matches[0], delimiter, quote_char, nontrivial_lcd); + full_completion = 1; + return (0); + } + else if (_rl_menu_complete_prefix_first && match_list_size > 1) + { + rl_ding (); + return (0); + } + } + + /* Now we have the list of matches. Replace the text between + rl_line_buffer[orig_start] and rl_line_buffer[rl_point] with + matches[match_list_index], and add any necessary closing char. */ + + if (matches == 0 || match_list_size == 0) + { + rl_ding (); + FREE (matches); + matches = (char **)0; + completion_changed_buffer = 0; + return (0); + } + + match_list_index += count; + if (match_list_index < 0) + { + while (match_list_index < 0) + match_list_index += match_list_size; + } + else + match_list_index %= match_list_size; + + if (match_list_index == 0 && match_list_size > 1) + { + rl_ding (); + insert_match (matches[0], orig_start, MULT_MATCH, "e_char); + } + else + { + insert_match (matches[match_list_index], orig_start, SINGLE_MATCH, "e_char); + append_to_match (matches[match_list_index], delimiter, quote_char, + strcmp (orig_text, matches[match_list_index])); + } + + completion_changed_buffer = 1; + return (0); +} + +int +rl_backward_menu_complete (int count, int key) +{ + /* Positive arguments to backward-menu-complete translate into negative + arguments for menu-complete, and vice versa. */ + return (rl_menu_complete (-count, key)); +} diff --git a/readline/readline/config.h.in b/readline/readline/config.h.in new file mode 100644 index 0000000000..6de47b5874 --- /dev/null +++ b/readline/readline/config.h.in @@ -0,0 +1,302 @@ +/* config.h.in. Maintained by hand. */ + +/* Template definitions for autoconf */ +#undef __EXTENSIONS__ +#undef _ALL_SOURCE +#undef _GNU_SOURCE +#undef _POSIX_SOURCE +#undef _POSIX_1_SOURCE +#undef _POSIX_PTHREAD_SEMANTICS +#undef _TANDEM_SOURCE +#undef _MINIX + +/* Define NO_MULTIBYTE_SUPPORT to not compile in support for multibyte + characters, even if the OS supports them. */ +#undef NO_MULTIBYTE_SUPPORT + +#undef _FILE_OFFSET_BITS + +/* Define as the return type of signal handlers (int or void). */ +#undef RETSIGTYPE + +#undef VOID_SIGHANDLER + +/* Characteristics of the compiler. */ +#undef sig_atomic_t + +#undef size_t + +#undef ssize_t + +#undef const + +#undef volatile + +#undef PROTOTYPES +#undef __PROTOTYPES + +#undef __CHAR_UNSIGNED__ + +/* Define if the `S_IS*' macros in do not work properly. */ +#undef STAT_MACROS_BROKEN + +/* Define if you have the chown function. */ +#undef HAVE_CHOWN + +/* Define if you have the fcntl function. */ +#undef HAVE_FCNTL + +/* Define if you have the fnmatch function. */ +#undef HAVE_FNMATCH + +/* Define if you have the getpwent function. */ +#undef HAVE_GETPWENT + +/* Define if you have the getpwnam function. */ +#undef HAVE_GETPWNAM + +/* Define if you have the getpwuid function. */ +#undef HAVE_GETPWUID + +/* Define if you have the isascii function. */ +#undef HAVE_ISASCII + +/* Define if you have the iswctype function. */ +#undef HAVE_ISWCTYPE + +/* Define if you have the iswlower function. */ +#undef HAVE_ISWLOWER + +/* Define if you have the iswupper function. */ +#undef HAVE_ISWUPPER + +/* Define if you have the isxdigit function. */ +#undef HAVE_ISXDIGIT + +/* Define if you have the kill function. */ +#undef HAVE_KILL + +/* Define if you have the lstat function. */ +#undef HAVE_LSTAT + +/* Define if you have the mbrlen function. */ +#undef HAVE_MBRLEN + +/* Define if you have the mbrtowc function. */ +#undef HAVE_MBRTOWC + +/* Define if you have the mbsrtowcs function. */ +#undef HAVE_MBSRTOWCS + +/* Define if you have the memmove function. */ +#undef HAVE_MEMMOVE + +/* Define if you have the pselect function. */ +#undef HAVE_PSELECT + +/* Define if you have the putenv function. */ +#undef HAVE_PUTENV + +/* Define if you have the readlink function. */ +#undef HAVE_READLINK + +/* Define if you have the select function. */ +#undef HAVE_SELECT + +/* Define if you have the setenv function. */ +#undef HAVE_SETENV + +/* Define if you have the setlocale function. */ +#undef HAVE_SETLOCALE + +/* Define if you have the strcasecmp function. */ +#undef HAVE_STRCASECMP + +/* Define if you have the strcoll function. */ +#undef HAVE_STRCOLL + +#undef STRCOLL_BROKEN + +/* Define if you have the strpbrk function. */ +#undef HAVE_STRPBRK + +/* Define if you have the tcgetattr function. */ +#undef HAVE_TCGETATTR + +/* Define if you have the towlower function. */ +#undef HAVE_TOWLOWER + +/* Define if you have the towupper function. */ +#undef HAVE_TOWUPPER + +/* Define if you have the vsnprintf function. */ +#undef HAVE_VSNPRINTF + +/* Define if you have the wcrtomb function. */ +#undef HAVE_WCRTOMB + +/* Define if you have the wcscoll function. */ +#undef HAVE_WCSCOLL + +/* Define if you have the wctype function. */ +#undef HAVE_WCTYPE + +/* Define if you have the wcwidth function. */ +#undef HAVE_WCWIDTH + +/* and whether it works */ +#undef WCWIDTH_BROKEN + +#undef STDC_HEADERS + +/* Define if you have the header file. */ +#undef HAVE_DIRENT_H + +/* Define if you have the header file. */ +#undef HAVE_FCNTL_H + +/* Define if you have the header file. */ +#undef HAVE_LANGINFO_H + +/* Define if you have the header file. */ +#undef HAVE_LIBAUDIT_H + +/* Define if you have the header file. */ +#undef HAVE_LIMITS_H + +/* Define if you have the header file. */ +#undef HAVE_LOCALE_H + +/* Define if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define if you have the header file. */ +#undef HAVE_NDIR_H + +/* Define if you have the header file. */ +#undef HAVE_NCURSES_TERMCAP_H + +/* Define if you have the header file. */ +#undef HAVE_PWD_H + +/* Define if you have the header file. */ +#undef HAVE_STDARG_H + +/* Define if you have the header file. */ +#undef HAVE_STDBOOL_H + +/* Define if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define if you have the header file. */ +#undef HAVE_STRING_H + +/* Define if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_DIR_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_FILE_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_IOCTL_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_NDIR_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_PTE_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_PTEM_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_SELECT_H + +/* Define if you have the header file. */ +#undef HAVE_SYS_STREAM_H + +/* Define if you have the header file. */ +#undef HAVE_TERMCAP_H + +/* Define if you have the header file. */ +#undef HAVE_TERMIO_H + +/* Define if you have the header file. */ +#undef HAVE_TERMIOS_H + +/* Define if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define if you have the header file. */ +#undef HAVE_VARARGS_H + +/* Define if you have the header file. */ +#undef HAVE_WCHAR_H + +/* Define if you have the header file. */ +#undef HAVE_WCTYPE_H + +#undef HAVE_MBSTATE_T + +/* Define if you have wchar_t in . */ +#undef HAVE_WCHAR_T + +/* Define if you have wctype_t in . */ +#undef HAVE_WCTYPE_T + +/* Define if you have wint_t in . */ +#undef HAVE_WINT_T + +/* Define if you have and nl_langinfo(CODESET). */ +#undef HAVE_LANGINFO_CODESET + +/* Define if you have and it defines AUDIT_USER_TTY */ +#undef HAVE_DECL_AUDIT_USER_TTY + +/* Definitions pulled in from aclocal.m4. */ +#undef VOID_SIGHANDLER + +#undef GWINSZ_IN_SYS_IOCTL + +#undef STRUCT_WINSIZE_IN_SYS_IOCTL + +#undef STRUCT_WINSIZE_IN_TERMIOS + +#undef TIOCSTAT_IN_SYS_IOCTL + +#undef FIONREAD_IN_SYS_IOCTL + +#undef SPEED_T_IN_SYS_TYPES + +#undef HAVE_GETPW_DECLS + +#undef HAVE_STRUCT_DIRENT_D_INO + +#undef HAVE_STRUCT_DIRENT_D_FILENO + +#undef HAVE_STRUCT_DIRENT_D_NAMLEN + +#undef HAVE_BSD_SIGNALS + +#undef HAVE_POSIX_SIGNALS + +#undef HAVE_USG_SIGHOLD + +#undef MUST_REINSTALL_SIGHANDLERS + +#undef HAVE_POSIX_SIGSETJMP + +#undef CTYPE_NON_ASCII + +/* modify settings or make new ones based on what autoconf tells us. */ + +/* Ultrix botches type-ahead when switching from canonical to + non-canonical mode, at least through version 4.3 */ +#if !defined (HAVE_TERMIOS_H) || !defined (HAVE_TCGETATTR) || defined (ultrix) +# define TERMIOS_MISSING +#endif + +/* VARARGS defines moved to rlstdc.h */ diff --git a/readline/readline/configure b/readline/readline/configure new file mode 100755 index 0000000000..de7499e6df --- /dev/null +++ b/readline/readline/configure @@ -0,0 +1,8203 @@ +#! /bin/sh +# From configure.ac for Readline 8.0, version 2.85. +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for readline 8.0. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and +$0: bug-readline@gnu.org about your system, including any +$0: error possibly output before this message. Then install +$0: a modern shell, or manually run the script under such a +$0: shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='readline' +PACKAGE_TARNAME='readline' +PACKAGE_VERSION='8.0' +PACKAGE_STRING='readline 8.0' +PACKAGE_BUGREPORT='bug-readline@gnu.org' +PACKAGE_URL='' + +ac_unique_file="readline.h" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='LTLIBOBJS +TERMCAP_PKG_CONFIG_LIB +TERMCAP_LIB +LIBVERSION +ARFLAGS +LOCAL_DEFS +LOCAL_LDFLAGS +LOCAL_CFLAGS +BUILD_DIR +EXAMPLES_INSTALL_TARGET +SHARED_INSTALL_TARGET +STATIC_INSTALL_TARGET +SHARED_TARGET +STATIC_TARGET +SHLIB_MINOR +SHLIB_MAJOR +SHLIB_LIBS +SHLIB_DLLVERSION +SHLIB_LIBVERSION +SHLIB_LIBSUFF +SHLIB_LIBPREF +SHLIB_DOT +SHLIB_XLDFLAGS +SHLIB_STATUS +SHOBJ_STATUS +SHOBJ_LIBS +SHOBJ_XLDFLAGS +SHOBJ_LDFLAGS +SHOBJ_LD +SHOBJ_CFLAGS +SHOBJ_CC +LIBOBJS +MAKE_SHELL +RANLIB +AR +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +EGREP +GREP +CPP +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +SET_MAKE +CROSS_COMPILE +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_curses +enable_multibyte +enable_static +enable_install_examples +enable_largefile +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures readline 8.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/readline] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of readline 8.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-multibyte enable multibyte characters if OS supports them + --enable-static build static libraries [[default=YES]] + --disable-install-examples + don't install examples [[default=install]] + --disable-largefile omit support for large files + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-curses use the curses library instead of the termcap + library + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +readline configure 8.0 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ----------------------------------- ## +## Report this to bug-readline@gnu.org ## +## ----------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile + +# ac_fn_c_check_type LINENO TYPE VAR INCLUDES +# ------------------------------------------- +# Tests whether TYPE exists after having included INCLUDES, setting cache +# variable VAR accordingly. +ac_fn_c_check_type () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=no" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof ($2)) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +if (sizeof (($2))) + return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + eval "$3=yes" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_type + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES +# --------------------------------------------- +# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR +# accordingly. +ac_fn_c_check_decl () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + as_decl_name=`echo $2|sed 's/ *(.*//'` + as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'` + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5 +$as_echo_n "checking whether $as_decl_name is declared... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +#ifndef $as_decl_name +#ifdef __cplusplus + (void) $as_decl_use; +#else + (void) $as_decl_name; +#endif +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_decl + +# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES +# -------------------------------------------- +# Tries to find the compile-time value of EXPR in a program that includes +# INCLUDES, setting VAR accordingly. Returns whether the value could be +# computed +ac_fn_c_compute_int () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=0 ac_mid=0 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid; break +else + as_fn_arith $ac_mid + 1 && ac_lo=$as_val + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) < 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=-1 ac_mid=-1 + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) >= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_lo=$ac_mid; break +else + as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + ac_lo= ac_hi= +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +int +main () +{ +static int test_array [1 - 2 * !(($2) <= $ac_mid)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_hi=$ac_mid +else + as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in #(( +?*) eval "$3=\$ac_lo"; ac_retval=0 ;; +'') ac_retval=1 ;; +esac + else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +static long int longval () { return $2; } +static unsigned long int ulongval () { return $2; } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (($2) < 0) + { + long int i = longval (); + if (i != ($2)) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ($2)) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo >>conftest.val; read $3 config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by readline $as_me 8.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + +ac_aux_dir= +for ac_dir in ../.. "$srcdir"/../..; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../.. \"$srcdir\"/../.." "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +ac_config_headers="$ac_config_headers config.h" + + +LIBVERSION=8.0 + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if ${ac_cv_build+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if ${ac_cv_host+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + + + +opt_curses=no + + +# Check whether --with-curses was given. +if test "${with_curses+set}" = set; then : + withval=$with_curses; opt_curses=$withval +fi + + +if test "$opt_curses" = "yes"; then + prefer_curses=yes +fi + +opt_multibyte=yes +opt_static_libs=yes +opt_shared_libs=no +opt_install_examples=no + +# Check whether --enable-multibyte was given. +if test "${enable_multibyte+set}" = set; then : + enableval=$enable_multibyte; opt_multibyte=$enableval +fi + +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; opt_static_libs=$enableval +fi + +# Check whether --enable-install-examples was given. +if test "${enable_install_examples+set}" = set; then : + enableval=$enable_install_examples; opt_install_examples=$enableval +fi + + +if test $opt_multibyte = no; then +$as_echo "#define NO_MULTIBYTE_SUPPORT 1" >>confdefs.h + +fi + + + +CROSS_COMPILE= +if test "x$cross_compiling" = "xyes"; then + case "${host}" in + *-cygwin*) + cross_cache=${srcdir}/cross-build/cygwin.cache + ;; + *-mingw*) + cross_cache=${srcdir}/cross-build/mingw.cache + ;; + i[3456]86-*-beos*) + cross_cache=${srcdir}/cross-build/x86-beos.cache + ;; + *) echo "configure: cross-compiling for $host is not supported" >&2 + ;; + esac + if test -n "${cross_cache}" && test -r "${cross_cache}"; then + echo "loading cross-build cache file ${cross_cache}" + . ${cross_cache} + fi + unset cross_cache + CROSS_COMPILE='-DCROSS_COMPILING' + +fi + +echo "" +echo "Beginning configuration for readline-$LIBVERSION for ${host_cpu}-${host_vendor}-${host_os}" +echo "" + +# We want these before the checks, so the checks can modify their values. +test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default" +if test "x$ac_cv_header_minix_config_h" = xyes; then : + MINIX=yes +else + MINIX= +fi + + + if test "$MINIX" = yes; then + +$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h + + +$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h + + +$as_echo "#define _MINIX 1" >>confdefs.h + + fi + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5 +$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; } +if ${ac_cv_safe_to_define___extensions__+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# define __EXTENSIONS__ 1 + $ac_includes_default +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_safe_to_define___extensions__=yes +else + ac_cv_safe_to_define___extensions__=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5 +$as_echo "$ac_cv_safe_to_define___extensions__" >&6; } + test $ac_cv_safe_to_define___extensions__ = yes && + $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h + + $as_echo "#define _ALL_SOURCE 1" >>confdefs.h + + $as_echo "#define _GNU_SOURCE 1" >>confdefs.h + + $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h + + $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h + + + + +# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. +test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" + +if test $ac_cv_c_compiler_gnu = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 +$as_echo_n "checking whether $CC needs -traditional... " >&6; } +if ${ac_cv_prog_gcc_traditional+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_pattern="Autoconf.*'x'" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +Autoconf TIOCGETP +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes +else + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +Autoconf TCGETA +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 +$as_echo "$ac_cv_prog_gcc_traditional" >&6; } + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_AR+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +test -n "$ARFLAGS" || ARFLAGS="cr" +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + +MAKE_SHELL=/bin/sh + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 +$as_echo_n "checking for an ANSI C-conforming const... " >&6; } +if ${ac_cv_c_const+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifndef __cplusplus + /* Ultrix mips cc rejects this sort of thing. */ + typedef int charset[2]; + const charset cs = { 0, 0 }; + /* SunOS 4.1.1 cc rejects this. */ + char const *const *pcpcc; + char **ppc; + /* NEC SVR4.0.2 mips cc rejects this. */ + struct point {int x, y;}; + static struct point const zero = {0,0}; + /* AIX XL C 1.02.0.0 rejects this. + It does not let you subtract one const X* pointer from another in + an arm of an if-expression whose if-part is not a constant + expression */ + const char *g = "string"; + pcpcc = &g + (g ? g-g : 0); + /* HPUX 7.0 cc rejects these. */ + ++pcpcc; + ppc = (char**) pcpcc; + pcpcc = (char const *const *) ppc; + { /* SCO 3.2v4 cc rejects this sort of thing. */ + char tx; + char *t = &tx; + char const *s = 0 ? (char *) 0 : (char const *) 0; + + *t++ = 0; + if (s) return 0; + } + { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ + int x[] = {25, 17}; + const int *foo = &x[0]; + ++foo; + } + { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ + typedef const int *iptr; + iptr p = 0; + ++p; + } + { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying + "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ + struct s { int j; const int *ap[3]; } bx; + struct s *b = &bx; b->j = 5; + } + { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; + if (!foo) return 0; + } + return !cs[0] && !zero.x; +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_const=yes +else + ac_cv_c_const=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 +$as_echo "$ac_cv_c_const" >&6; } +if test $ac_cv_c_const = no; then + +$as_echo "#define const /**/" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for function prototypes" >&5 +$as_echo_n "checking for function prototypes... " >&6; } +if test "$ac_cv_prog_cc_c89" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + +$as_echo "#define PROTOTYPES 1" >>confdefs.h + + +$as_echo "#define __PROTOTYPES 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether char is unsigned" >&5 +$as_echo_n "checking whether char is unsigned... " >&6; } +if ${ac_cv_c_char_unsigned+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((char) -1) < 0)]; +test_array [0] = 0; +return test_array [0]; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_char_unsigned=no +else + ac_cv_c_char_unsigned=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_char_unsigned" >&5 +$as_echo "$ac_cv_c_char_unsigned" >&6; } +if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then + $as_echo "#define __CHAR_UNSIGNED__ 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5 +$as_echo_n "checking for working volatile... " >&6; } +if ${ac_cv_c_volatile+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +volatile int x; +int * volatile y = (int *) 0; +return !x && !y; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_c_volatile=yes +else + ac_cv_c_volatile=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5 +$as_echo "$ac_cv_c_volatile" >&6; } +if test $ac_cv_c_volatile = no; then + +$as_echo "#define volatile /**/" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5 +$as_echo_n "checking return type of signal handlers... " >&6; } +if ${ac_cv_type_signal+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +int +main () +{ +return *(signal (0, 0)) (0) == 1; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_type_signal=int +else + ac_cv_type_signal=void +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5 +$as_echo "$ac_cv_type_signal" >&6; } + +cat >>confdefs.h <<_ACEOF +#define RETSIGTYPE $ac_cv_type_signal +_ACEOF + + + +ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" +if test "x$ac_cv_type_size_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define size_t unsigned int +_ACEOF + +fi + +ac_fn_c_check_type "$LINENO" "ssize_t" "ac_cv_type_ssize_t" "$ac_includes_default" +if test "x$ac_cv_type_ssize_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define ssize_t int +_ACEOF + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stat file-mode macros are broken" >&5 +$as_echo_n "checking whether stat file-mode macros are broken... " >&6; } +if ${ac_cv_header_stat_broken+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include + +#if defined S_ISBLK && defined S_IFDIR +extern char c1[S_ISBLK (S_IFDIR) ? -1 : 1]; +#endif + +#if defined S_ISBLK && defined S_IFCHR +extern char c2[S_ISBLK (S_IFCHR) ? -1 : 1]; +#endif + +#if defined S_ISLNK && defined S_IFREG +extern char c3[S_ISLNK (S_IFREG) ? -1 : 1]; +#endif + +#if defined S_ISSOCK && defined S_IFREG +extern char c4[S_ISSOCK (S_IFREG) ? -1 : 1]; +#endif + +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stat_broken=no +else + ac_cv_header_stat_broken=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stat_broken" >&5 +$as_echo "$ac_cv_header_stat_broken" >&6; } +if test $ac_cv_header_stat_broken = yes; then + +$as_echo "#define STAT_MACROS_BROKEN 1" >>confdefs.h + +fi + +ac_header_dirent=no +for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do + as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 +$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } +if eval \${$as_ac_Header+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include <$ac_hdr> + +int +main () +{ +if ((DIR *) 0) +return 0; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$as_ac_Header=yes" +else + eval "$as_ac_Header=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$as_ac_Header + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 +_ACEOF + +ac_header_dirent=$ac_hdr; break +fi + +done +# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. +if test $ac_header_dirent = dirent.h; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 +$as_echo_n "checking for library containing opendir... " >&6; } +if ${ac_cv_search_opendir+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char opendir (); +int +main () +{ +return opendir (); + ; + return 0; +} +_ACEOF +for ac_lib in '' dir; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_opendir=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_opendir+:} false; then : + break +fi +done +if ${ac_cv_search_opendir+:} false; then : + +else + ac_cv_search_opendir=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 +$as_echo "$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 +$as_echo_n "checking for library containing opendir... " >&6; } +if ${ac_cv_search_opendir+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char opendir (); +int +main () +{ +return opendir (); + ; + return 0; +} +_ACEOF +for ac_lib in '' x; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_opendir=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_opendir+:} false; then : + break +fi +done +if ${ac_cv_search_opendir+:} false; then : + +else + ac_cv_search_opendir=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 +$as_echo "$ac_cv_search_opendir" >&6; } +ac_res=$ac_cv_search_opendir +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + +fi + + +for ac_func in fcntl kill lstat readlink +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +for ac_func in fnmatch memmove pselect putenv select setenv setlocale \ + strcasecmp strpbrk tcgetattr vsnprintf +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +for ac_func in isascii isxdigit +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +for ac_func in getpwent getpwnam getpwuid +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for uid_t in sys/types.h" >&5 +$as_echo_n "checking for uid_t in sys/types.h... " >&6; } +if ${ac_cv_type_uid_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "uid_t" >/dev/null 2>&1; then : + ac_cv_type_uid_t=yes +else + ac_cv_type_uid_t=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_uid_t" >&5 +$as_echo "$ac_cv_type_uid_t" >&6; } +if test $ac_cv_type_uid_t = no; then + +$as_echo "#define uid_t int" >>confdefs.h + + +$as_echo "#define gid_t int" >>confdefs.h + +fi + +for ac_header in unistd.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default" +if test "x$ac_cv_header_unistd_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_UNISTD_H 1 +_ACEOF + +fi + +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working chown" >&5 +$as_echo_n "checking for working chown... " >&6; } +if ${ac_cv_func_chown_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_chown_works=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +#include + +int +main () +{ + char *f = "conftest.chown"; + struct stat before, after; + + if (creat (f, 0600) < 0) + return 1; + if (stat (f, &before) < 0) + return 1; + if (chown (f, (uid_t) -1, (gid_t) -1) == -1) + return 1; + if (stat (f, &after) < 0) + return 1; + return ! (before.st_uid == after.st_uid && before.st_gid == after.st_gid); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_chown_works=yes +else + ac_cv_func_chown_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +rm -f conftest.chown + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_chown_works" >&5 +$as_echo "$ac_cv_func_chown_works" >&6; } +if test $ac_cv_func_chown_works = yes; then + +$as_echo "#define HAVE_CHOWN 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strcoll" >&5 +$as_echo_n "checking for working strcoll... " >&6; } +if ${ac_cv_func_strcoll_works+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + ac_cv_func_strcoll_works=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +return (strcoll ("abc", "def") >= 0 || + strcoll ("ABC", "DEF") >= 0 || + strcoll ("123", "456") >= 0) + ; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + ac_cv_func_strcoll_works=yes +else + ac_cv_func_strcoll_works=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strcoll_works" >&5 +$as_echo "$ac_cv_func_strcoll_works" >&6; } +if test $ac_cv_func_strcoll_works = yes; then + +$as_echo "#define HAVE_STRCOLL 1" >>confdefs.h + +fi + + +for ac_header in fcntl.h unistd.h stdlib.h varargs.h stdarg.h stdbool.h \ + string.h strings.h \ + limits.h locale.h pwd.h memory.h termcap.h termios.h termio.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +for ac_header in sys/ioctl.h sys/pte.h sys/stream.h sys/select.h sys/file.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in sys/ptem.h +do : + ac_fn_c_check_header_compile "$LINENO" "sys/ptem.h" "ac_cv_header_sys_ptem_h" " +#if HAVE_SYS_STREAM_H +# include +#endif + +" +if test "x$ac_cv_header_sys_ptem_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_SYS_PTEM_H 1 +_ACEOF + +fi + +done + + +# Check whether --enable-largefile was given. +if test "${enable_largefile+set}" = set; then : + enableval=$enable_largefile; +fi + +if test "$enable_largefile" != no; then + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 +$as_echo_n "checking for special C compiler options needed for large files... " >&6; } +if ${ac_cv_sys_largefile_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_sys_largefile_CC=no + if test "$GCC" != yes; then + ac_save_CC=$CC + while :; do + # IRIX 6.2 and later do not support large files by default, + # so use the C compiler's -n32 option if that helps. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF + if ac_fn_c_try_compile "$LINENO"; then : + break +fi +rm -f core conftest.err conftest.$ac_objext + CC="$CC -n32" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_largefile_CC=' -n32'; break +fi +rm -f core conftest.err conftest.$ac_objext + break + done + CC=$ac_save_CC + rm -f conftest.$ac_ext + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5 +$as_echo "$ac_cv_sys_largefile_CC" >&6; } + if test "$ac_cv_sys_largefile_CC" != no; then + CC=$CC$ac_cv_sys_largefile_CC + fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 +$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } +if ${ac_cv_sys_file_offset_bits+:} false; then : + $as_echo_n "(cached) " >&6 +else + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=no; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _FILE_OFFSET_BITS 64 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_file_offset_bits=64; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_file_offset_bits=unknown + break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 +$as_echo "$ac_cv_sys_file_offset_bits" >&6; } +case $ac_cv_sys_file_offset_bits in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits +_ACEOF +;; +esac +rm -rf conftest* + if test $ac_cv_sys_file_offset_bits = unknown; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 +$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } +if ${ac_cv_sys_large_files+:} false; then : + $as_echo_n "(cached) " >&6 +else + while :; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=no; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#define _LARGE_FILES 1 +#include + /* Check that off_t can represent 2**63 - 1 correctly. + We can't simply define LARGE_OFF_T to be 9223372036854775807, + since some C++ compilers masquerading as C compilers + incorrectly reject 9223372036854775807. */ +#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) + int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 + && LARGE_OFF_T % 2147483647 == 1) + ? 1 : -1]; +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_sys_large_files=1; break +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_sys_large_files=unknown + break +done +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 +$as_echo "$ac_cv_sys_large_files" >&6; } +case $ac_cv_sys_large_files in #( + no | unknown) ;; + *) +cat >>confdefs.h <<_ACEOF +#define _LARGE_FILES $ac_cv_sys_large_files +_ACEOF +;; +esac +rm -rf conftest* + fi + + +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for type of signal functions" >&5 +$as_echo_n "checking for type of signal functions... " >&6; } +if ${bash_cv_signal_vintage+:} false; then : + $as_echo_n "(cached) " >&6 +else + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + + sigset_t ss; + struct sigaction sa; + sigemptyset(&ss); sigsuspend(&ss); + sigaction(SIGINT, &sa, (struct sigaction *) 0); + sigprocmask(SIG_BLOCK, &ss, (sigset_t *) 0); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + bash_cv_signal_vintage=posix +else + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + + int mask = sigmask(SIGINT); + sigsetmask(mask); sigblock(mask); sigpause(mask); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + bash_cv_signal_vintage=4.2bsd +else + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #include + RETSIGTYPE foo() { } +int +main () +{ + + int mask = sigmask(SIGINT); + sigset(SIGINT, foo); sigrelse(SIGINT); + sighold(SIGINT); sigpause(SIGINT); + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + bash_cv_signal_vintage=svr3 +else + bash_cv_signal_vintage=v7 + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_signal_vintage" >&5 +$as_echo "$bash_cv_signal_vintage" >&6; } +if test "$bash_cv_signal_vintage" = posix; then +$as_echo "#define HAVE_POSIX_SIGNALS 1" >>confdefs.h + +elif test "$bash_cv_signal_vintage" = "4.2bsd"; then +$as_echo "#define HAVE_BSD_SIGNALS 1" >>confdefs.h + +elif test "$bash_cv_signal_vintage" = svr3; then +$as_echo "#define HAVE_USG_SIGHOLD 1" >>confdefs.h + +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if signal handlers must be reinstalled when invoked" >&5 +$as_echo_n "checking if signal handlers must be reinstalled when invoked... " >&6; } +if ${bash_cv_must_reinstall_sighandlers+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&5 +$as_echo "$as_me: WARNING: cannot check signal handling if cross compiling -- defaulting to no" >&2;} + bash_cv_must_reinstall_sighandlers=no + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifdef HAVE_UNISTD_H +#include +#endif + +typedef RETSIGTYPE sigfunc(); + +volatile int nsigint; + +#ifdef HAVE_POSIX_SIGNALS +sigfunc * +set_signal_handler(sig, handler) + int sig; + sigfunc *handler; +{ + struct sigaction act, oact; + act.sa_handler = handler; + act.sa_flags = 0; + sigemptyset (&act.sa_mask); + sigemptyset (&oact.sa_mask); + sigaction (sig, &act, &oact); + return (oact.sa_handler); +} +#else +#define set_signal_handler(s, h) signal(s, h) +#endif + +RETSIGTYPE +sigint(s) +int s; +{ + nsigint++; +} + +main() +{ + nsigint = 0; + set_signal_handler(SIGINT, sigint); + kill((int)getpid(), SIGINT); + kill((int)getpid(), SIGINT); + exit(nsigint != 2); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + bash_cv_must_reinstall_sighandlers=no +else + bash_cv_must_reinstall_sighandlers=yes +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_must_reinstall_sighandlers" >&5 +$as_echo "$bash_cv_must_reinstall_sighandlers" >&6; } +if test $bash_cv_must_reinstall_sighandlers = yes; then +$as_echo "#define MUST_REINSTALL_SIGHANDLERS 1" >>confdefs.h + +fi + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for presence of POSIX-style sigsetjmp/siglongjmp" >&5 +$as_echo_n "checking for presence of POSIX-style sigsetjmp/siglongjmp... " >&6; } +if ${bash_cv_func_sigsetjmp+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&5 +$as_echo "$as_me: WARNING: cannot check for sigsetjmp/siglongjmp if cross-compiling -- defaulting to missing" >&2;} + bash_cv_func_sigsetjmp=missing + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_UNISTD_H +#include +#endif +#include +#include +#include + +main() +{ +#if !defined (_POSIX_VERSION) || !defined (HAVE_POSIX_SIGNALS) +exit (1); +#else + +int code; +sigset_t set, oset; +sigjmp_buf xx; + +/* get the mask */ +sigemptyset(&set); +sigemptyset(&oset); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &set); +sigprocmask(SIG_BLOCK, (sigset_t *)NULL, &oset); + +/* save it */ +code = sigsetjmp(xx, 1); +if (code) + exit(0); /* could get sigmask and compare to oset here. */ + +/* change it */ +sigaddset(&set, SIGINT); +sigprocmask(SIG_BLOCK, &set, (sigset_t *)NULL); + +/* and siglongjmp */ +siglongjmp(xx, 10); +exit(1); +#endif +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + bash_cv_func_sigsetjmp=present +else + bash_cv_func_sigsetjmp=missing +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_sigsetjmp" >&5 +$as_echo "$bash_cv_func_sigsetjmp" >&6; } +if test $bash_cv_func_sigsetjmp = present; then +$as_echo "#define HAVE_POSIX_SIGSETJMP 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for lstat" >&5 +$as_echo_n "checking for lstat... " >&6; } +if ${bash_cv_func_lstat+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ + lstat(".",(struct stat *)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + bash_cv_func_lstat=yes +else + bash_cv_func_lstat=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_lstat" >&5 +$as_echo "$bash_cv_func_lstat" >&6; } +if test $bash_cv_func_lstat = yes; then + $as_echo "#define HAVE_LSTAT 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether or not strcoll and strcmp differ" >&5 +$as_echo_n "checking whether or not strcoll and strcmp differ... " >&6; } +if ${bash_cv_func_strcoll_broken+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&5 +$as_echo "$as_me: WARNING: cannot check strcoll if cross compiling -- defaulting to no" >&2;} + bash_cv_func_strcoll_broken=no + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#if defined (HAVE_LOCALE_H) +#include +#endif + +main(c, v) +int c; +char *v[]; +{ + int r1, r2; + char *deflocale, *defcoll; + +#ifdef HAVE_SETLOCALE + deflocale = setlocale(LC_ALL, ""); + defcoll = setlocale(LC_COLLATE, ""); +#endif + +#ifdef HAVE_STRCOLL + /* These two values are taken from tests/glob-test. */ + r1 = strcoll("abd", "aXd"); +#else + r1 = 0; +#endif + r2 = strcmp("abd", "aXd"); + + /* These two should both be greater than 0. It is permissible for + a system to return different values, as long as the sign is the + same. */ + + /* Exit with 1 (failure) if these two values are both > 0, since + this tests whether strcoll(3) is broken with respect to strcmp(3) + in the default locale. */ + exit (r1 > 0 && r2 > 0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + bash_cv_func_strcoll_broken=yes +else + bash_cv_func_strcoll_broken=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_strcoll_broken" >&5 +$as_echo "$bash_cv_func_strcoll_broken" >&6; } +if test $bash_cv_func_strcoll_broken = yes; then +$as_echo "#define STRCOLL_BROKEN 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the ctype macros accept non-ascii characters" >&5 +$as_echo_n "checking whether the ctype macros accept non-ascii characters... " >&6; } +if ${bash_cv_func_ctype_nonascii+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&5 +$as_echo "$as_me: WARNING: cannot check ctype macros if cross compiling -- defaulting to no" >&2;} + bash_cv_func_ctype_nonascii=no + +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#ifdef HAVE_LOCALE_H +#include +#endif +#include +#include + +main(c, v) +int c; +char *v[]; +{ + char *deflocale; + unsigned char x; + int r1, r2; + +#ifdef HAVE_SETLOCALE + /* We take a shot here. If that locale is not known, try the + system default. We try this one because '\342' (226) is + known to be a printable character in that locale. */ + deflocale = setlocale(LC_ALL, "en_US.ISO8859-1"); + if (deflocale == 0) + deflocale = setlocale(LC_ALL, ""); +#endif + + x = '\342'; + r1 = isprint(x); + x -= 128; + r2 = isprint(x); + exit (r1 == 0 || r2 == 0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + bash_cv_func_ctype_nonascii=yes +else + bash_cv_func_ctype_nonascii=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_func_ctype_nonascii" >&5 +$as_echo "$bash_cv_func_ctype_nonascii" >&6; } +if test $bash_cv_func_ctype_nonascii = yes; then +$as_echo "#define CTYPE_NON_ASCII 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether getpw functions are declared in pwd.h" >&5 +$as_echo_n "checking whether getpw functions are declared in pwd.h... " >&6; } +if ${bash_cv_getpw_declared+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#ifdef HAVE_UNISTD_H +# include +#endif +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "getpwuid" >/dev/null 2>&1; then : + bash_cv_getpw_declared=yes +else + bash_cv_getpw_declared=no +fi +rm -f conftest* + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_getpw_declared" >&5 +$as_echo "$bash_cv_getpw_declared" >&6; } +if test $bash_cv_getpw_declared = yes; then +$as_echo "#define HAVE_GETPW_DECLS 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether termios.h defines TIOCGWINSZ" >&5 +$as_echo_n "checking whether termios.h defines TIOCGWINSZ... " >&6; } +if ${ac_cv_sys_tiocgwinsz_in_termios_h+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#ifdef TIOCGWINSZ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then : + ac_cv_sys_tiocgwinsz_in_termios_h=yes +else + ac_cv_sys_tiocgwinsz_in_termios_h=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_termios_h" >&5 +$as_echo "$ac_cv_sys_tiocgwinsz_in_termios_h" >&6; } + +if test $ac_cv_sys_tiocgwinsz_in_termios_h != yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether sys/ioctl.h defines TIOCGWINSZ" >&5 +$as_echo_n "checking whether sys/ioctl.h defines TIOCGWINSZ... " >&6; } +if ${ac_cv_sys_tiocgwinsz_in_sys_ioctl_h+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#ifdef TIOCGWINSZ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then : + ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=yes +else + ac_cv_sys_tiocgwinsz_in_sys_ioctl_h=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&5 +$as_echo "$ac_cv_sys_tiocgwinsz_in_sys_ioctl_h" >&6; } + + if test $ac_cv_sys_tiocgwinsz_in_sys_ioctl_h = yes; then + +$as_echo "#define GWINSZ_IN_SYS_IOCTL 1" >>confdefs.h + + fi +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sig_atomic_t in signal.h" >&5 +$as_echo_n "checking for sig_atomic_t in signal.h... " >&6; } +if ${ac_cv_have_sig_atomic_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include + +int +main () +{ + sig_atomic_t x; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_have_sig_atomic_t=yes +else + ac_cv_have_sig_atomic_t=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_have_sig_atomic_t" >&5 +$as_echo "$ac_cv_have_sig_atomic_t" >&6; } +if test "$ac_cv_have_sig_atomic_t" = "no" +then + ac_fn_c_check_type "$LINENO" "sig_atomic_t" "ac_cv_type_sig_atomic_t" "$ac_includes_default" +if test "x$ac_cv_type_sig_atomic_t" = xyes; then : + +else + +cat >>confdefs.h <<_ACEOF +#define sig_atomic_t int +_ACEOF + +fi + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether signal handlers are of type void" >&5 +$as_echo_n "checking whether signal handlers are of type void... " >&6; } +if ${bash_cv_void_sighandler+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#ifdef signal +#undef signal +#endif +#ifdef __cplusplus +extern "C" +#endif +void (*signal ()) (); +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_void_sighandler=yes +else + bash_cv_void_sighandler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_void_sighandler" >&5 +$as_echo "$bash_cv_void_sighandler" >&6; } +if test $bash_cv_void_sighandler = yes; then +$as_echo "#define VOID_SIGHANDLER 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for TIOCSTAT in sys/ioctl.h" >&5 +$as_echo_n "checking for TIOCSTAT in sys/ioctl.h... " >&6; } +if ${bash_cv_tiocstat_in_ioctl+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +int +main () +{ +int x = TIOCSTAT; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_tiocstat_in_ioctl=yes +else + bash_cv_tiocstat_in_ioctl=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_tiocstat_in_ioctl" >&5 +$as_echo "$bash_cv_tiocstat_in_ioctl" >&6; } +if test $bash_cv_tiocstat_in_ioctl = yes; then +$as_echo "#define TIOCSTAT_IN_SYS_IOCTL 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FIONREAD in sys/ioctl.h" >&5 +$as_echo_n "checking for FIONREAD in sys/ioctl.h... " >&6; } +if ${bash_cv_fionread_in_ioctl+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +int +main () +{ +int x = FIONREAD; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_fionread_in_ioctl=yes +else + bash_cv_fionread_in_ioctl=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_fionread_in_ioctl" >&5 +$as_echo "$bash_cv_fionread_in_ioctl" >&6; } +if test $bash_cv_fionread_in_ioctl = yes; then +$as_echo "#define FIONREAD_IN_SYS_IOCTL 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for speed_t in sys/types.h" >&5 +$as_echo_n "checking for speed_t in sys/types.h... " >&6; } +if ${bash_cv_speed_t_in_sys_types+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +speed_t x; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_speed_t_in_sys_types=yes +else + bash_cv_speed_t_in_sys_types=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_speed_t_in_sys_types" >&5 +$as_echo "$bash_cv_speed_t_in_sys_types" >&6; } +if test $bash_cv_speed_t_in_sys_types = yes; then +$as_echo "#define SPEED_T_IN_SYS_TYPES 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct winsize in sys/ioctl.h and termios.h" >&5 +$as_echo_n "checking for struct winsize in sys/ioctl.h and termios.h... " >&6; } +if ${bash_cv_struct_winsize_header+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct winsize x; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_struct_winsize_header=ioctl_h +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct winsize x; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_struct_winsize_header=termios_h +else + bash_cv_struct_winsize_header=other +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +if test $bash_cv_struct_winsize_header = ioctl_h; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: sys/ioctl.h" >&5 +$as_echo "sys/ioctl.h" >&6; } + $as_echo "#define STRUCT_WINSIZE_IN_SYS_IOCTL 1" >>confdefs.h + +elif test $bash_cv_struct_winsize_header = termios_h; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: termios.h" >&5 +$as_echo "termios.h" >&6; } + $as_echo "#define STRUCT_WINSIZE_IN_TERMIOS 1" >>confdefs.h + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5 +$as_echo "not found" >&6; } +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_ino" >&5 +$as_echo_n "checking for struct dirent.d_ino... " >&6; } +if ${bash_cv_dirent_has_dino+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ + +int +main () +{ + +struct dirent d; int z; z = d.d_ino; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_dirent_has_dino=yes +else + bash_cv_dirent_has_dino=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_dino" >&5 +$as_echo "$bash_cv_dirent_has_dino" >&6; } +if test $bash_cv_dirent_has_dino = yes; then +$as_echo "#define HAVE_STRUCT_DIRENT_D_INO 1" >>confdefs.h + +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for struct dirent.d_fileno" >&5 +$as_echo_n "checking for struct dirent.d_fileno... " >&6; } +if ${bash_cv_dirent_has_d_fileno+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#ifdef HAVE_UNISTD_H +# include +#endif /* HAVE_UNISTD_H */ +#if defined(HAVE_DIRENT_H) +# include +#else +# define dirent direct +# ifdef HAVE_SYS_NDIR_H +# include +# endif /* SYSNDIR */ +# ifdef HAVE_SYS_DIR_H +# include +# endif /* SYSDIR */ +# ifdef HAVE_NDIR_H +# include +# endif +#endif /* HAVE_DIRENT_H */ + +int +main () +{ + +struct dirent d; int z; z = d.d_fileno; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_dirent_has_d_fileno=yes +else + bash_cv_dirent_has_d_fileno=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_dirent_has_d_fileno" >&5 +$as_echo "$bash_cv_dirent_has_d_fileno" >&6; } +if test $bash_cv_dirent_has_d_fileno = yes; then +$as_echo "#define HAVE_STRUCT_DIRENT_D_FILENO 1" >>confdefs.h + +fi + + +for ac_header in libaudit.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "libaudit.h" "ac_cv_header_libaudit_h" "$ac_includes_default" +if test "x$ac_cv_header_libaudit_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBAUDIT_H 1 +_ACEOF + +fi + +done + +ac_fn_c_check_decl "$LINENO" "AUDIT_USER_TTY" "ac_cv_have_decl_AUDIT_USER_TTY" "#include +" +if test "x$ac_cv_have_decl_AUDIT_USER_TTY" = xyes; then : + ac_have_decl=1 +else + ac_have_decl=0 +fi + +cat >>confdefs.h <<_ACEOF +#define HAVE_DECL_AUDIT_USER_TTY $ac_have_decl +_ACEOF + + +case "$host_os" in +aix*) prefer_curses=yes ;; +esac + +if test "X$bash_cv_termcap_lib" = "X"; then +_bash_needmsg=yes +else +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5 +$as_echo_n "checking which library has the termcap functions... " >&6; } +_bash_needmsg= +fi +if ${bash_cv_termcap_lib+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_fn_c_check_func "$LINENO" "tgetent" "ac_cv_func_tgetent" +if test "x$ac_cv_func_tgetent" = xyes; then : + bash_cv_termcap_lib=libc +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5 +$as_echo_n "checking for tgetent in -ltermcap... " >&6; } +if ${ac_cv_lib_termcap_tgetent+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ltermcap $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char tgetent (); +int +main () +{ +return tgetent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_termcap_tgetent=yes +else + ac_cv_lib_termcap_tgetent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5 +$as_echo "$ac_cv_lib_termcap_tgetent" >&6; } +if test "x$ac_cv_lib_termcap_tgetent" = xyes; then : + bash_cv_termcap_lib=libtermcap +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5 +$as_echo_n "checking for tgetent in -ltinfo... " >&6; } +if ${ac_cv_lib_tinfo_tgetent+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ltinfo $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char tgetent (); +int +main () +{ +return tgetent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_tinfo_tgetent=yes +else + ac_cv_lib_tinfo_tgetent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5 +$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; } +if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then : + bash_cv_termcap_lib=libtinfo +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5 +$as_echo_n "checking for tgetent in -lcurses... " >&6; } +if ${ac_cv_lib_curses_tgetent+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcurses $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char tgetent (); +int +main () +{ +return tgetent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_curses_tgetent=yes +else + ac_cv_lib_curses_tgetent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_tgetent" >&5 +$as_echo "$ac_cv_lib_curses_tgetent" >&6; } +if test "x$ac_cv_lib_curses_tgetent" = xyes; then : + bash_cv_termcap_lib=libcurses +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5 +$as_echo_n "checking for tgetent in -lncurses... " >&6; } +if ${ac_cv_lib_ncurses_tgetent+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lncurses $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char tgetent (); +int +main () +{ +return tgetent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ncurses_tgetent=yes +else + ac_cv_lib_ncurses_tgetent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5 +$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; } +if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then : + bash_cv_termcap_lib=libncurses +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncursesw" >&5 +$as_echo_n "checking for tgetent in -lncursesw... " >&6; } +if ${ac_cv_lib_ncursesw_tgetent+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lncursesw $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char tgetent (); +int +main () +{ +return tgetent (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_ncursesw_tgetent=yes +else + ac_cv_lib_ncursesw_tgetent=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_tgetent" >&5 +$as_echo "$ac_cv_lib_ncursesw_tgetent" >&6; } +if test "x$ac_cv_lib_ncursesw_tgetent" = xyes; then : + bash_cv_termcap_lib=libncursesw +else + bash_cv_termcap_lib=gnutermcap +fi + +fi + +fi + +fi + +fi + +fi + +fi + +if test "X$_bash_needmsg" = "Xyes"; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which library has the termcap functions" >&5 +$as_echo_n "checking which library has the termcap functions... " >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: using $bash_cv_termcap_lib" >&5 +$as_echo "using $bash_cv_termcap_lib" >&6; } +if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then +LDFLAGS="$LDFLAGS -L./lib/termcap" +TERMCAP_LIB="./lib/termcap/libtermcap.a" +TERMCAP_DEP="./lib/termcap/libtermcap.a" +elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then +TERMCAP_LIB=-ltermcap +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libtinfo; then +TERMCAP_LIB=-ltinfo +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libncurses; then +TERMCAP_LIB=-lncurses +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libc; then +TERMCAP_LIB= +TERMCAP_DEP= +else +TERMCAP_LIB=-lcurses +TERMCAP_DEP= +fi + +if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then + if test "$prefer_curses" = yes; then + TERMCAP_LIB=-lcurses + else + TERMCAP_LIB=-ltermcap #default + fi +fi +# Windows ncurses installation +if test "$TERMCAP_LIB" = "-lncurses"; then + for ac_header in ncurses/termcap.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "ncurses/termcap.h" "ac_cv_header_ncurses_termcap_h" "$ac_includes_default" +if test "x$ac_cv_header_ncurses_termcap_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_NCURSES_TERMCAP_H 1 +_ACEOF + +fi + +done + +fi + +case "$TERMCAP_LIB" in +-ltinfo) TERMCAP_PKG_CONFIG_LIB=tinfo ;; +-lcurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; +-lncurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; +-ltermcap) TERMCAP_PKG_CONFIG_LIB=termcap ;; +*) TERMCAP_PKG_CONFIG_LIB=termcap ;; +esac + + +for ac_header in wctype.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "wctype.h" "ac_cv_header_wctype_h" "$ac_includes_default" +if test "x$ac_cv_header_wctype_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_WCTYPE_H 1 +_ACEOF + +fi + +done + +for ac_header in wchar.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "wchar.h" "ac_cv_header_wchar_h" "$ac_includes_default" +if test "x$ac_cv_header_wchar_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_WCHAR_H 1 +_ACEOF + +fi + +done + +for ac_header in langinfo.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "langinfo.h" "ac_cv_header_langinfo_h" "$ac_includes_default" +if test "x$ac_cv_header_langinfo_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LANGINFO_H 1 +_ACEOF + +fi + +done + + +for ac_header in mbstr.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "mbstr.h" "ac_cv_header_mbstr_h" "$ac_includes_default" +if test "x$ac_cv_header_mbstr_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_MBSTR_H 1 +_ACEOF + +fi + +done + + +ac_fn_c_check_func "$LINENO" "mbrlen" "ac_cv_func_mbrlen" +if test "x$ac_cv_func_mbrlen" = xyes; then : + $as_echo "#define HAVE_MBRLEN 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "mbscasecmp" "ac_cv_func_mbscasecmp" +if test "x$ac_cv_func_mbscasecmp" = xyes; then : + $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "mbscmp" "ac_cv_func_mbscmp" +if test "x$ac_cv_func_mbscmp" = xyes; then : + $as_echo "#define HAVE_MBSCMP 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "mbsnrtowcs" "ac_cv_func_mbsnrtowcs" +if test "x$ac_cv_func_mbsnrtowcs" = xyes; then : + $as_echo "#define HAVE_MBSNRTOWCS 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "mbsrtowcs" "ac_cv_func_mbsrtowcs" +if test "x$ac_cv_func_mbsrtowcs" = xyes; then : + $as_echo "#define HAVE_MBSRTOWCS 1" >>confdefs.h + +fi + + +ac_fn_c_check_func "$LINENO" "mbschr" "ac_cv_func_mbschr" +if test "x$ac_cv_func_mbschr" = xyes; then : + $as_echo "#define HAVE_MBSCHR 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" mbschr.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS mbschr.$ac_objext" + ;; +esac + +fi + + + +ac_fn_c_check_func "$LINENO" "wcrtomb" "ac_cv_func_wcrtomb" +if test "x$ac_cv_func_wcrtomb" = xyes; then : + $as_echo "#define HAVE_WCRTOMB 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "wcscoll" "ac_cv_func_wcscoll" +if test "x$ac_cv_func_wcscoll" = xyes; then : + $as_echo "#define HAVE_WCSCOLL 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "wcsdup" "ac_cv_func_wcsdup" +if test "x$ac_cv_func_wcsdup" = xyes; then : + $as_echo "#define HAVE_WCSDUP 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "wcwidth" "ac_cv_func_wcwidth" +if test "x$ac_cv_func_wcwidth" = xyes; then : + $as_echo "#define HAVE_WCWIDTH 1" >>confdefs.h + +fi + +ac_fn_c_check_func "$LINENO" "wctype" "ac_cv_func_wctype" +if test "x$ac_cv_func_wctype" = xyes; then : + $as_echo "#define HAVE_WCTYPE 1" >>confdefs.h + +fi + + +ac_fn_c_check_func "$LINENO" "wcswidth" "ac_cv_func_wcswidth" +if test "x$ac_cv_func_wcswidth" = xyes; then : + $as_echo "#define HAVE_WCSWIDTH 1" >>confdefs.h + +else + case " $LIBOBJS " in + *" wcswidth.$ac_objext "* ) ;; + *) LIBOBJS="$LIBOBJS wcswidth.$ac_objext" + ;; +esac + +fi + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether mbrtowc and mbstate_t are properly declared" >&5 +$as_echo_n "checking whether mbrtowc and mbstate_t are properly declared... " >&6; } +if ${ac_cv_func_mbrtowc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +wchar_t wc; + char const s[] = ""; + size_t n = 1; + mbstate_t state; + return ! (sizeof state && (mbrtowc) (&wc, s, n, &state)); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_func_mbrtowc=yes +else + ac_cv_func_mbrtowc=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_mbrtowc" >&5 +$as_echo "$ac_cv_func_mbrtowc" >&6; } + if test $ac_cv_func_mbrtowc = yes; then + +$as_echo "#define HAVE_MBRTOWC 1" >>confdefs.h + + fi + +if test $ac_cv_func_mbrtowc = yes; then + $as_echo "#define HAVE_MBSTATE_T 1" >>confdefs.h + +fi + +for ac_func in iswlower iswupper towlower towupper iswctype +do : + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" +if eval test \"x\$"$as_ac_var"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for nl_langinfo and CODESET" >&5 +$as_echo_n "checking for nl_langinfo and CODESET... " >&6; } +if ${bash_cv_langinfo_codeset+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +char* cs = nl_langinfo(CODESET); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + bash_cv_langinfo_codeset=yes +else + bash_cv_langinfo_codeset=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_langinfo_codeset" >&5 +$as_echo "$bash_cv_langinfo_codeset" >&6; } +if test $bash_cv_langinfo_codeset = yes; then + $as_echo "#define HAVE_LANGINFO_CODESET 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wchar_t in wchar.h" >&5 +$as_echo_n "checking for wchar_t in wchar.h... " >&6; } +if ${bash_cv_type_wchar_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +int +main () +{ + + wchar_t foo; + foo = 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_type_wchar_t=yes +else + bash_cv_type_wchar_t=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wchar_t" >&5 +$as_echo "$bash_cv_type_wchar_t" >&6; } +if test $bash_cv_type_wchar_t = yes; then + +$as_echo "#define HAVE_WCHAR_T 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wctype_t in wctype.h" >&5 +$as_echo_n "checking for wctype_t in wctype.h... " >&6; } +if ${bash_cv_type_wctype_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + + wctype_t foo; + foo = 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_type_wctype_t=yes +else + bash_cv_type_wctype_t=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wctype_t" >&5 +$as_echo "$bash_cv_type_wctype_t" >&6; } +if test $bash_cv_type_wctype_t = yes; then + +$as_echo "#define HAVE_WCTYPE_T 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wint_t in wctype.h" >&5 +$as_echo_n "checking for wint_t in wctype.h... " >&6; } +if ${bash_cv_type_wint_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ + + wint_t foo; + foo = 0; + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + bash_cv_type_wint_t=yes +else + bash_cv_type_wint_t=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_type_wint_t" >&5 +$as_echo "$bash_cv_type_wint_t" >&6; } +if test $bash_cv_type_wint_t = yes; then + +$as_echo "#define HAVE_WINT_T 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for wcwidth broken with unicode combining characters" >&5 +$as_echo_n "checking for wcwidth broken with unicode combining characters... " >&6; } +if ${bash_cv_wcwidth_broken+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + bash_cv_wcwidth_broken=no +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include + +#include +#include + +main(c, v) +int c; +char **v; +{ + int w; + + setlocale(LC_ALL, "en_US.UTF-8"); + w = wcwidth (0x0301); + exit (w == 0); /* exit 0 if wcwidth broken */ +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + bash_cv_wcwidth_broken=yes +else + bash_cv_wcwidth_broken=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $bash_cv_wcwidth_broken" >&5 +$as_echo "$bash_cv_wcwidth_broken" >&6; } +if test "$bash_cv_wcwidth_broken" = yes; then + +$as_echo "#define WCWIDTH_BROKEN 1" >>confdefs.h + +fi + +if test "$am_cv_func_iconv" = yes; then + OLDLIBS="$LIBS" + LIBS="$LIBS $LIBINTL $LIBICONV" + for ac_func in locale_charset +do : + ac_fn_c_check_func "$LINENO" "locale_charset" "ac_cv_func_locale_charset" +if test "x$ac_cv_func_locale_charset" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LOCALE_CHARSET 1 +_ACEOF + +fi +done + + LIBS="$OLDLIBS" +fi + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of wchar_t" >&5 +$as_echo_n "checking size of wchar_t... " >&6; } +if ${ac_cv_sizeof_wchar_t+:} false; then : + $as_echo_n "(cached) " >&6 +else + if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (wchar_t))" "ac_cv_sizeof_wchar_t" "$ac_includes_default"; then : + +else + if test "$ac_cv_type_wchar_t" = yes; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "cannot compute sizeof (wchar_t) +See \`config.log' for more details" "$LINENO" 5; } + else + ac_cv_sizeof_wchar_t=0 + fi +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_wchar_t" >&5 +$as_echo "$ac_cv_sizeof_wchar_t" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_WCHAR_T $ac_cv_sizeof_wchar_t +_ACEOF + + + + + +case "$host_cpu" in +*cray*) LOCAL_CFLAGS=-DCRAY ;; +*s390*) LOCAL_CFLAGS=-fsigned-char ;; +esac + +case "$host_os" in +isc*) LOCAL_CFLAGS=-Disc386 ;; +esac + +# shared library configuration section +# +# Shared object configuration section. These values are generated by +# ${srcdir}/support/shobj-conf +# +if test -f ${srcdir}/support/shobj-conf; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking configuration for building shared libraries" >&5 +$as_echo_n "checking configuration for building shared libraries... " >&6; } + eval `TERMCAP_LIB=$TERMCAP_LIB ${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c ${host_cpu} -o ${host_os} -v ${host_vendor}` + +# case "$SHLIB_LIBS" in +# *curses*|*termcap*|*termlib*) ;; +# *) SHLIB_LIBS="$SHLIB_LIBS $TERMCAP_LIB" ;; +# esac + + + + + + + + + + + + + + + + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SHLIB_STATUS" >&5 +$as_echo "$SHLIB_STATUS" >&6; } + + # SHLIB_STATUS is either `supported' or `unsupported'. If it's + # `unsupported', turn off any default shared library building + if test "$SHLIB_STATUS" = 'unsupported'; then + opt_shared_libs=no + fi + + # shared library versioning + # quoted for m4 so I can use character classes + SHLIB_MAJOR=`expr "$LIBVERSION" : '\([0-9]\)\..*'` + SHLIB_MINOR=`expr "$LIBVERSION" : '[0-9]\.\([0-9]\).*'` + + +fi + +if test "$opt_static_libs" = "yes"; then + STATIC_TARGET=static + STATIC_INSTALL_TARGET=install-static +fi +if test "$opt_shared_libs" = "yes"; then + SHARED_TARGET=shared + SHARED_INSTALL_TARGET=install-shared +fi + + + + + + +if test "$opt_install_examples" = "yes"; then + EXAMPLES_INSTALL_TARGET=install-examples +fi + + +case "$build_os" in +msdosdjgpp*) BUILD_DIR=`pwd.exe` ;; # to prevent //d/path/file +*) BUILD_DIR=`pwd` ;; +esac + +case "$BUILD_DIR" in +*\ *) BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;; +*) ;; +esac + + + + + + + + + + + + + + + + + + + +ac_config_files="$ac_config_files Makefile doc/Makefile examples/Makefile shlib/Makefile readline.pc" + +ac_config_commands="$ac_config_commands default" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by readline $as_me 8.0, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +readline config.status 8.0 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; + "examples/Makefile") CONFIG_FILES="$CONFIG_FILES examples/Makefile" ;; + "shlib/Makefile") CONFIG_FILES="$CONFIG_FILES shlib/Makefile" ;; + "readline.pc") CONFIG_FILES="$CONFIG_FILES readline.pc" ;; + "default") CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "default":C) +# Makefile uses this timestamp file to record whether config.h is up to date. +echo > stamp-h + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/readline/readline/configure.ac b/readline/readline/configure.ac new file mode 100644 index 0000000000..b9b3e1c8aa --- /dev/null +++ b/readline/readline/configure.ac @@ -0,0 +1,320 @@ +dnl +dnl Configure script for readline library +dnl +dnl report bugs to chet@po.cwru.edu +dnl +dnl Process this file with autoconf to produce a configure script. + +# Copyright (C) 1987-2018 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +AC_REVISION([for Readline 8.0, version 2.85]) + +m4_include([../../config/override.m4]) + +AC_INIT(readline, 8.0, bug-readline@gnu.org) + +dnl make sure we are using a recent autoconf version +AC_PREREQ(2.50) + +AC_CONFIG_SRCDIR(readline.h) +dnl GDB LOCAL +dnl AC_CONFIG_AUX_DIR(./support) +AC_CONFIG_AUX_DIR(../..) +AC_CONFIG_HEADERS(config.h) + +dnl update the value of RL_READLINE_VERSION in readline.h when this changes +LIBVERSION=8.0 + +AC_CANONICAL_HOST +AC_CANONICAL_BUILD + +dnl configure defaults +opt_curses=no + +dnl arguments to configure +AC_ARG_WITH(curses, AC_HELP_STRING([--with-curses], [use the curses library instead of the termcap library]), opt_curses=$withval) + +if test "$opt_curses" = "yes"; then + prefer_curses=yes +fi + +dnl option parsing for optional features +opt_multibyte=yes +opt_static_libs=yes +opt_shared_libs=no +opt_install_examples=no + +AC_ARG_ENABLE(multibyte, AC_HELP_STRING([--enable-multibyte], [enable multibyte characters if OS supports them]), opt_multibyte=$enableval) +dnl AC_ARG_ENABLE(shared, AC_HELP_STRING([--enable-shared], [build shared libraries [[default=YES]]]), opt_shared_libs=$enableval) +AC_ARG_ENABLE(static, AC_HELP_STRING([--enable-static], [build static libraries [[default=YES]]]), opt_static_libs=$enableval) +AC_ARG_ENABLE(install-examples, AC_HELP_STRING([--disable-install-examples], [don't install examples [[default=install]]]), opt_install_examples=$enableval) + +if test $opt_multibyte = no; then +AC_DEFINE(NO_MULTIBYTE_SUPPORT) +fi + +dnl load up the cross-building cache file -- add more cases and cache +dnl files as necessary + +dnl Note that host and target machine are the same, and different than the +dnl build machine. + +CROSS_COMPILE= +if test "x$cross_compiling" = "xyes"; then + case "${host}" in + *-cygwin*) + cross_cache=${srcdir}/cross-build/cygwin.cache + ;; + *-mingw*) + cross_cache=${srcdir}/cross-build/mingw.cache + ;; + i[[3456]]86-*-beos*) + cross_cache=${srcdir}/cross-build/x86-beos.cache + ;; + *) echo "configure: cross-compiling for $host is not supported" >&2 + ;; + esac + if test -n "${cross_cache}" && test -r "${cross_cache}"; then + echo "loading cross-build cache file ${cross_cache}" + . ${cross_cache} + fi + unset cross_cache + CROSS_COMPILE='-DCROSS_COMPILING' + AC_SUBST(CROSS_COMPILE) +fi + +echo "" +echo "Beginning configuration for readline-$LIBVERSION for ${host_cpu}-${host_vendor}-${host_os}" +echo "" + +# We want these before the checks, so the checks can modify their values. +test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 + +AC_PROG_MAKE_SET +AC_PROG_CC +dnl AC_AIX +AC_MINIX + +# If we're using gcc and the user hasn't specified CFLAGS, add -O to CFLAGS. +test -n "$GCC" && test -n "$auto_cflags" && CFLAGS="$CFLAGS -O" + +AC_PROG_GCC_TRADITIONAL +AC_PROG_INSTALL +AC_CHECK_TOOL(AR, ar) +dnl Set default for ARFLAGS, since autoconf does not have a macro for it. +dnl This allows people to set it when running configure or make +test -n "$ARFLAGS" || ARFLAGS="cr" +AC_PROG_RANLIB + +MAKE_SHELL=/bin/sh +AC_SUBST(MAKE_SHELL) + +AC_C_CONST +AC_C_PROTOTYPES +AC_C_CHAR_UNSIGNED +AC_C_VOLATILE + +AC_TYPE_SIGNAL + +AC_TYPE_SIZE_T +AC_CHECK_TYPE(ssize_t, int) + +AC_HEADER_STDC + +AC_HEADER_STAT +AC_HEADER_DIRENT + +AC_CHECK_FUNCS(fcntl kill lstat readlink) +AC_CHECK_FUNCS(fnmatch memmove pselect putenv select setenv setlocale \ + strcasecmp strpbrk tcgetattr vsnprintf) +AC_CHECK_FUNCS(isascii isxdigit) +AC_CHECK_FUNCS(getpwent getpwnam getpwuid) + +AC_FUNC_CHOWN +AC_FUNC_STRCOLL + +AC_CHECK_HEADERS(fcntl.h unistd.h stdlib.h varargs.h stdarg.h stdbool.h \ + string.h strings.h \ + limits.h locale.h pwd.h memory.h termcap.h termios.h termio.h) +AC_CHECK_HEADERS(sys/ioctl.h sys/pte.h sys/stream.h sys/select.h sys/file.h) + +AC_CHECK_HEADERS(sys/ptem.h,,, +[[ +#if HAVE_SYS_STREAM_H +# include +#endif +]]) + +AC_SYS_LARGEFILE + +BASH_SYS_SIGNAL_VINTAGE +BASH_SYS_REINSTALL_SIGHANDLERS + +BASH_FUNC_POSIX_SETJMP +BASH_FUNC_LSTAT +BASH_FUNC_STRCOLL +BASH_FUNC_CTYPE_NONASCII + +BASH_CHECK_GETPW_FUNCS + +AC_HEADER_TIOCGWINSZ + +BASH_TYPE_SIG_ATOMIC_T +BASH_TYPE_SIGHANDLER + +BASH_HAVE_TIOCSTAT +BASH_HAVE_FIONREAD +BASH_CHECK_SPEED_T +BASH_STRUCT_WINSIZE +BASH_STRUCT_DIRENT_D_INO +BASH_STRUCT_DIRENT_D_FILENO + +AC_CHECK_HEADERS(libaudit.h) +AC_CHECK_DECLS([AUDIT_USER_TTY],,, [[#include ]]) + +dnl yuck +case "$host_os" in +aix*) prefer_curses=yes ;; +esac +BASH_CHECK_LIB_TERMCAP +if test "$TERMCAP_LIB" = "./lib/termcap/libtermcap.a"; then + if test "$prefer_curses" = yes; then + TERMCAP_LIB=-lcurses + else + TERMCAP_LIB=-ltermcap #default + fi +fi +# Windows ncurses installation +if test "$TERMCAP_LIB" = "-lncurses"; then + AC_CHECK_HEADERS(ncurses/termcap.h) +fi + +case "$TERMCAP_LIB" in +-ltinfo) TERMCAP_PKG_CONFIG_LIB=tinfo ;; +-lcurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; +-lncurses) TERMCAP_PKG_CONFIG_LIB=ncurses ;; +-ltermcap) TERMCAP_PKG_CONFIG_LIB=termcap ;; +*) TERMCAP_PKG_CONFIG_LIB=termcap ;; +esac + +BASH_CHECK_MULTIBYTE + +case "$host_cpu" in +*cray*) LOCAL_CFLAGS=-DCRAY ;; +*s390*) LOCAL_CFLAGS=-fsigned-char ;; +esac + +case "$host_os" in +isc*) LOCAL_CFLAGS=-Disc386 ;; +esac + +# shared library configuration section +# +# Shared object configuration section. These values are generated by +# ${srcdir}/support/shobj-conf +# +if test -f ${srcdir}/support/shobj-conf; then + AC_MSG_CHECKING(configuration for building shared libraries) + eval `TERMCAP_LIB=$TERMCAP_LIB ${CONFIG_SHELL-/bin/sh} ${srcdir}/support/shobj-conf -C "${CC}" -c ${host_cpu} -o ${host_os} -v ${host_vendor}` + +# case "$SHLIB_LIBS" in +# *curses*|*termcap*|*termlib*) ;; +# *) SHLIB_LIBS="$SHLIB_LIBS $TERMCAP_LIB" ;; +# esac + + AC_SUBST(SHOBJ_CC) + AC_SUBST(SHOBJ_CFLAGS) + AC_SUBST(SHOBJ_LD) + AC_SUBST(SHOBJ_LDFLAGS) + AC_SUBST(SHOBJ_XLDFLAGS) + AC_SUBST(SHOBJ_LIBS) + AC_SUBST(SHOBJ_STATUS) + AC_SUBST(SHLIB_STATUS) + AC_SUBST(SHLIB_XLDFLAGS) + AC_SUBST(SHLIB_DOT) + AC_SUBST(SHLIB_LIBPREF) + AC_SUBST(SHLIB_LIBSUFF) + AC_SUBST(SHLIB_LIBVERSION) + AC_SUBST(SHLIB_DLLVERSION) + AC_SUBST(SHLIB_LIBS) + AC_MSG_RESULT($SHLIB_STATUS) + + # SHLIB_STATUS is either `supported' or `unsupported'. If it's + # `unsupported', turn off any default shared library building + if test "$SHLIB_STATUS" = 'unsupported'; then + opt_shared_libs=no + fi + + # shared library versioning + # quoted for m4 so I can use character classes + SHLIB_MAJOR=[`expr "$LIBVERSION" : '\([0-9]\)\..*'`] + SHLIB_MINOR=[`expr "$LIBVERSION" : '[0-9]\.\([0-9]\).*'`] + AC_SUBST(SHLIB_MAJOR) + AC_SUBST(SHLIB_MINOR) +fi + +if test "$opt_static_libs" = "yes"; then + STATIC_TARGET=static + STATIC_INSTALL_TARGET=install-static +fi +if test "$opt_shared_libs" = "yes"; then + SHARED_TARGET=shared + SHARED_INSTALL_TARGET=install-shared +fi + +AC_SUBST(STATIC_TARGET) +AC_SUBST(SHARED_TARGET) +AC_SUBST(STATIC_INSTALL_TARGET) +AC_SUBST(SHARED_INSTALL_TARGET) + +if test "$opt_install_examples" = "yes"; then + EXAMPLES_INSTALL_TARGET=install-examples +fi +AC_SUBST(EXAMPLES_INSTALL_TARGET) + +case "$build_os" in +msdosdjgpp*) BUILD_DIR=`pwd.exe` ;; # to prevent //d/path/file +*) BUILD_DIR=`pwd` ;; +esac + +case "$BUILD_DIR" in +*\ *) BUILD_DIR=`echo "$BUILD_DIR" | sed 's: :\\\\ :g'` ;; +*) ;; +esac + +AC_SUBST(BUILD_DIR) + +AC_SUBST(CFLAGS) +AC_SUBST(LOCAL_CFLAGS) +AC_SUBST(LOCAL_LDFLAGS) +AC_SUBST(LOCAL_DEFS) + +AC_SUBST(AR) +AC_SUBST(ARFLAGS) + +AC_SUBST(host_cpu) +AC_SUBST(host_os) + +AC_SUBST(LIBVERSION) + +AC_SUBST(TERMCAP_LIB) +AC_SUBST(TERMCAP_PKG_CONFIG_LIB) + +AC_OUTPUT([Makefile doc/Makefile examples/Makefile shlib/Makefile readline.pc], +[ +# Makefile uses this timestamp file to record whether config.h is up to date. +echo > stamp-h +]) diff --git a/readline/readline/cross-build/cygwin.cache b/readline/readline/cross-build/cygwin.cache new file mode 100644 index 0000000000..b0bb49a837 --- /dev/null +++ b/readline/readline/cross-build/cygwin.cache @@ -0,0 +1,46 @@ +# This file is a shell script that caches the results of configure +# tests for CYGWIN32 so they don't need to be done when cross-compiling. + +# AC_FUNC_GETPGRP should also define GETPGRP_VOID +ac_cv_func_getpgrp_void=${ac_cv_func_getpgrp_void='yes'} +# AC_FUNC_SETVBUF_REVERSED should not define anything else +ac_cv_func_setvbuf_reversed=${ac_cv_func_setvbuf_reversed='no'} +# on CYGWIN32, system calls do not restart +ac_cv_sys_restartable_syscalls=${ac_cv_sys_restartable_syscalls='no'} +bash_cv_sys_restartable_syscalls=${bash_cv_sys_restartable_syscalls='no'} + +# these may be necessary, but they are currently commented out +#ac_cv_c_bigendian=${ac_cv_c_bigendian='no'} +ac_cv_sizeof_char_p=${ac_cv_sizeof_char_p='4'} +ac_cv_sizeof_int=${ac_cv_sizeof_int='4'} +ac_cv_sizeof_long=${ac_cv_sizeof_long='4'} + +bash_cv_dup2_broken=${bash_cv_dup2_broken='no'} +bash_cv_pgrp_pipe=${bash_cv_pgrp_pipe='no'} +bash_cv_type_rlimit=${bash_cv_type_rlimit='long'} +bash_cv_decl_under_sys_siglist=${bash_cv_decl_under_sys_siglist='no'} +bash_cv_under_sys_siglist=${bash_cv_under_sys_siglist='no'} +bash_cv_sys_siglist=${bash_cv_sys_siglist='no'} +bash_cv_opendir_not_robust=${bash_cv_opendir_not_robust='no'} +bash_cv_getenv_redef=${bash_cv_getenv_redef='yes'} +bash_cv_printf_declared=${bash_cv_printf_declared='yes'} +bash_cv_ulimit_maxfds=${bash_cv_ulimit_maxfds='no'} +bash_cv_getcwd_calls_popen=${bash_cv_getcwd_calls_popen='no'} +bash_cv_must_reinstall_sighandlers=${bash_cv_must_reinstall_sighandlers='no'} +bash_cv_job_control_missing=${bash_cv_job_control_missing='present'} +bash_cv_sys_named_pipes=${bash_cv_sys_named_pipes='missing'} +bash_cv_func_sigsetjmp=${bash_cv_func_sigsetjmp='present'} +bash_cv_mail_dir=${bash_cv_mail_dir='unknown'} +bash_cv_func_strcoll_broken=${bash_cv_func_strcoll_broken='no'} +bash_cv_have_mbstate_t=${bash_cv_have_mbstate_t='yes'} + +bash_cv_type_int32_t=${bash_cv_type_int32_t='int'} +bash_cv_type_u_int32_t=${bash_cv_type_u_int32_t='int'} +ac_cv_header_termcap_h=${ac_cv_header_termcap_h='yes'} +ac_cv_header_termios_h=${ac_cv_header_termios_h='yes'} +bash_cv_termcap_lib=${bash_cv_termcap_lib='-ltermcap'} + +bash_cv_tiocgwinsz_in_ioctl=${bash_cv_tiocgwinsz_in_ioctl='yes'} +ac_cv_lib_termcap_tgetent=${ac_cv_lib_termcap_tgetent='yes'} + +# end of cross-build/cygwin32.cache diff --git a/readline/readline/display.c b/readline/readline/display.c new file mode 100644 index 0000000000..89193b572b --- /dev/null +++ b/readline/readline/display.c @@ -0,0 +1,3249 @@ +/* display.c -- readline redisplay facility. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#include "posixstat.h" + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +#ifdef __MSDOS__ +# include +#endif + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +/* Termcap library stuff. */ +#include "tcap.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +static void update_line PARAMS((char *, char *, int, int, int, int)); +static void space_to_eol PARAMS((int)); +static void delete_chars PARAMS((int)); +static void insert_some_chars PARAMS((char *, int, int)); +static void open_some_spaces PARAMS((int)); +static void cr PARAMS((void)); +static void redraw_prompt PARAMS((char *)); + +/* Values for FLAGS */ +#define PMT_MULTILINE 0x01 + +static char *expand_prompt PARAMS((char *, int, int *, int *, int *, int *)); + +/* State of visible and invisible lines. */ +struct line_state + { + char *line; + int *lbreaks; + int lbsize; +#if defined (HANDLE_MULTIBYTE) + int wbsize; + int *wrapped_line; +#endif + }; + +/* The line display buffers. One is the line currently displayed on + the screen. The other is the line about to be displayed. */ +static struct line_state line_state_array[2]; +static struct line_state *line_state_visible = &line_state_array[0]; +static struct line_state *line_state_invisible = &line_state_array[1]; +static int line_structures_initialized = 0; + +/* Backwards-compatible names. */ +#define inv_lbreaks (line_state_invisible->lbreaks) +#define inv_lbsize (line_state_invisible->lbsize) +#define vis_lbreaks (line_state_visible->lbreaks) +#define vis_lbsize (line_state_visible->lbsize) + +#define visible_line (line_state_visible->line) +#define invisible_line (line_state_invisible->line) + +#if defined (HANDLE_MULTIBYTE) +static int _rl_col_width PARAMS((const char *, int, int, int)); +#else +# define _rl_col_width(l, s, e, f) (((e) <= (s)) ? 0 : (e) - (s)) +#endif + +/* Heuristic used to decide whether it is faster to move from CUR to NEW + by backing up or outputting a carriage return and moving forward. CUR + and NEW are either both buffer positions or absolute screen positions. */ +#define CR_FASTER(new, cur) (((new) + 1) < ((cur) - (new))) + +/* _rl_last_c_pos is an absolute cursor position in multibyte locales and a + buffer index in others. This macro is used when deciding whether the + current cursor position is in the middle of a prompt string containing + invisible characters. XXX - might need to take `modmark' into account. */ +/* XXX - only valid when tested against _rl_last_c_pos; buffer indices need + to use prompt_last_invisible directly. */ +#define PROMPT_ENDING_INDEX \ + ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) ? prompt_physical_chars : prompt_last_invisible+1) + +/* **************************************************************** */ +/* */ +/* Display stuff */ +/* */ +/* **************************************************************** */ + +/* This is the stuff that is hard for me. I never seem to write good + display routines in C. Let's see how I do this time. */ + +/* (PWP) Well... Good for a simple line updater, but totally ignores + the problems of input lines longer than the screen width. + + update_line and the code that calls it makes a multiple line, + automatically wrapping line update. Careful attention needs + to be paid to the vertical position variables. */ + +/* Keep two buffers; one which reflects the current contents of the + screen, and the other to draw what we think the new contents should + be. Then compare the buffers, and make whatever changes to the + screen itself that we should. Finally, make the buffer that we + just drew into be the one which reflects the current contents of the + screen, and place the cursor where it belongs. + + Commands that want to can fix the display themselves, and then let + this function know that the display has been fixed by setting the + RL_DISPLAY_FIXED variable. This is good for efficiency. */ + +/* Application-specific redisplay function. */ +rl_voidfunc_t *rl_redisplay_function = rl_redisplay; + +/* Global variables declared here. */ +/* What YOU turn on when you have handled all redisplay yourself. */ +int rl_display_fixed = 0; + +/* The stuff that gets printed out before the actual text of the line. + This is usually pointing to rl_prompt. */ +char *rl_display_prompt = (char *)NULL; + +/* Variables used to include the editing mode in the prompt. */ +char *_rl_emacs_mode_str; +int _rl_emacs_modestr_len; + +char *_rl_vi_ins_mode_str; +int _rl_vi_ins_modestr_len; + +char *_rl_vi_cmd_mode_str; +int _rl_vi_cmd_modestr_len; + +/* Pseudo-global variables declared here. */ + +/* Hints for other parts of readline to give to the display engine. */ +int _rl_suppress_redisplay = 0; +int _rl_want_redisplay = 0; + +/* The visible cursor position. If you print some text, adjust this. */ +/* NOTE: _rl_last_c_pos is used as a buffer index when not in a locale + supporting multibyte characters, and an absolute cursor position when + in such a locale. This is an artifact of the donated multibyte support. + Care must be taken when modifying its value. */ +int _rl_last_c_pos = 0; +int _rl_last_v_pos = 0; + +/* Number of physical lines consumed by the current line buffer currently + on screen minus 1. */ +int _rl_vis_botlin = 0; + +/* This is a hint update_line gives to rl_redisplay that it has adjusted the + value of _rl_last_c_pos *and* taken the presence of any invisible chars in + the prompt into account. rl_redisplay notes this and does not do the + adjustment itself. */ +static int cpos_adjusted; + +/* The index into the line buffer corresponding to the cursor position */ +static int cpos_buffer_position; + +/* A flag to note when we're displaying the first line of the prompt */ +static int displaying_prompt_first_line; +/* The number of multibyte characters in the prompt, if any */ +static int prompt_multibyte_chars; + +static int _rl_inv_botlin = 0; + +/* Variables used only in this file. */ +/* The last left edge of text that was displayed. This is used when + doing horizontal scrolling. It shifts in thirds of a screenwidth. */ +static int last_lmargin; + +/* A buffer for `modeline' messages. */ +static char *msg_buf = 0; +static int msg_bufsiz = 0; + +/* Non-zero forces the redisplay even if we thought it was unnecessary. */ +static int forced_display; + +/* Default and initial buffer size. Can grow. */ +static int line_size = 1024; + +/* Variables to keep track of the expanded prompt string, which may + include invisible characters. */ + +static char *local_prompt, *local_prompt_prefix; +static int local_prompt_len; +static int prompt_prefix_length; +/* Number of chars in the buffer that contribute to visible chars on the screen. + This might be different from the number of physical chars in the presence + of multibyte characters */ +static int prompt_visible_length; + +/* The number of invisible characters in the line currently being + displayed on the screen. */ +static int visible_wrap_offset; + +/* The number of invisible characters in the prompt string. Static so it + can be shared between rl_redisplay and update_line */ +static int wrap_offset; + +/* The index of the last invisible character in the prompt string. */ +static int prompt_last_invisible; + +/* The length (buffer offset) of the first line of the last (possibly + multi-line) buffer displayed on the screen. */ +static int visible_first_line_len; + +/* Number of invisible characters on the first physical line of the prompt. + Only valid when the number of physical characters in the prompt exceeds + (or is equal to) _rl_screenwidth. */ +static int prompt_invis_chars_first_line; + +static int prompt_last_screen_line; + +static int prompt_physical_chars; + +/* An array of indexes into the prompt string where we will break physical + screen lines. It's easier to compute in expand_prompt and use later in + rl_redisplay instead of having rl_redisplay try to guess about invisible + characters in the prompt or use heuristics about where they are. */ +static int *local_prompt_newlines; + +/* set to a non-zero value by rl_redisplay if we are marking modified history + lines and the current line is so marked. */ +static int modmark; + +static int line_totbytes; + +/* Variables to save and restore prompt and display information. */ + +/* These are getting numerous enough that it's time to create a struct. */ + +static char *saved_local_prompt; +static char *saved_local_prefix; +static int *saved_local_prompt_newlines; + +static int saved_last_invisible; +static int saved_visible_length; +static int saved_prefix_length; +static int saved_local_length; +static int saved_invis_chars_first_line; +static int saved_physical_chars; + +/* Return a string indicating the editing mode, for use in the prompt. */ + +static char * +prompt_modestr (int *lenp) +{ + if (rl_editing_mode == emacs_mode) + { + if (lenp) + *lenp = _rl_emacs_mode_str ? _rl_emacs_modestr_len : RL_EMACS_MODESTR_DEFLEN; + return _rl_emacs_mode_str ? _rl_emacs_mode_str : RL_EMACS_MODESTR_DEFAULT; + } + else if (_rl_keymap == vi_insertion_keymap) + { + if (lenp) + *lenp = _rl_vi_ins_mode_str ? _rl_vi_ins_modestr_len : RL_VI_INS_MODESTR_DEFLEN; + return _rl_vi_ins_mode_str ? _rl_vi_ins_mode_str : RL_VI_INS_MODESTR_DEFAULT; /* vi insert mode */ + } + else + { + if (lenp) + *lenp = _rl_vi_cmd_mode_str ? _rl_vi_cmd_modestr_len : RL_VI_CMD_MODESTR_DEFLEN; + return _rl_vi_cmd_mode_str ? _rl_vi_cmd_mode_str : RL_VI_CMD_MODESTR_DEFAULT; /* vi command mode */ + } +} + +/* Expand the prompt string S and return the number of visible + characters in *LP, if LP is not null. This is currently more-or-less + a placeholder for expansion. LIP, if non-null is a place to store the + index of the last invisible character in the returned string. NIFLP, + if non-zero, is a place to store the number of invisible characters in + the first prompt line. The previous are used as byte counts -- indexes + into a character buffer. *VLP gets the number of physical characters in + the expanded prompt (visible length) */ + +/* Current implementation: + \001 (^A) start non-visible characters + \002 (^B) end non-visible characters + all characters except \001 and \002 (following a \001) are copied to + the returned string; all characters except those between \001 and + \002 are assumed to be `visible'. */ + +/* Possible values for FLAGS: + PMT_MULTILINE caller indicates that this is part of a multiline prompt +*/ + +/* This approximates the number of lines the prompt will take when displayed */ +#define APPROX_DIV(n, d) (((n) < (d)) ? 1 : ((n) / (d)) + 1) + +static char * +expand_prompt (char *pmt, int flags, int *lp, int *lip, int *niflp, int *vlp) +{ + char *r, *ret, *p, *igstart, *nprompt, *ms; + int l, rl, last, ignoring, ninvis, invfl, invflset, ind, pind, physchars; + int mlen, newlines, newlines_guess, bound; + int mb_cur_max; + + /* We only expand the mode string for the last line of a multiline prompt + (a prompt with embedded newlines). */ + ms = (((pmt == rl_prompt) ^ (flags & PMT_MULTILINE)) && _rl_show_mode_in_prompt) ? prompt_modestr (&mlen) : 0; + if (ms) + { + l = strlen (pmt); + nprompt = (char *)xmalloc (l + mlen + 1); + memcpy (nprompt, ms, mlen); + strcpy (nprompt + mlen, pmt); + } + else + nprompt = pmt; + + mb_cur_max = MB_CUR_MAX; + + if (_rl_screenwidth == 0) + _rl_get_screen_size (0, 0); /* avoid division by zero */ + + /* Short-circuit if we can. We can do this if we are treating the prompt as + a sequence of bytes and there are no invisible characters in the prompt + to deal with. Since we populate local_prompt_newlines, we have to run + through the rest of the function if this prompt looks like it's going to + be longer than one screen line. */ + if ((mb_cur_max <= 1 || rl_byte_oriented) && strchr (nprompt, RL_PROMPT_START_IGNORE) == 0) + { + l = strlen (nprompt); + if (l < (_rl_screenwidth > 0 ? _rl_screenwidth : 80)) + { + r = (nprompt == pmt) ? savestring (pmt) : nprompt; + if (lp) + *lp = l; + if (lip) + *lip = 0; + if (niflp) + *niflp = 0; + if (vlp) + *vlp = l; + + local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * 2); + local_prompt_newlines[0] = 0; + local_prompt_newlines[1] = -1; + + return r; + } + } + + l = strlen (nprompt); /* XXX */ + r = ret = (char *)xmalloc (l + 1); + + /* Guess at how many screen lines the prompt will take to size the array that + keeps track of where the line wraps happen */ + newlines_guess = (_rl_screenwidth > 0) ? APPROX_DIV(l, _rl_screenwidth) : APPROX_DIV(l, 80); + local_prompt_newlines = (int *) xrealloc (local_prompt_newlines, sizeof (int) * (newlines_guess + 1)); + local_prompt_newlines[newlines = 0] = 0; + for (rl = 1; rl <= newlines_guess; rl++) + local_prompt_newlines[rl] = -1; + + rl = physchars = 0; /* mode string now part of nprompt */ + invfl = 0; /* invisible chars in first line of prompt */ + invflset = 0; /* we only want to set invfl once */ + igstart = 0; /* we're not ignoring any characters yet */ + + for (ignoring = last = ninvis = 0, p = nprompt; p && *p; p++) + { + /* This code strips the invisible character string markers + RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE */ + if (ignoring == 0 && *p == RL_PROMPT_START_IGNORE) /* XXX - check ignoring? */ + { + ignoring = 1; + igstart = p; + continue; + } + else if (ignoring && *p == RL_PROMPT_END_IGNORE) + { + ignoring = 0; + if (p != (igstart + 1)) + last = r - ret - 1; + continue; + } + else + { +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + pind = p - nprompt; + ind = _rl_find_next_mbchar (nprompt, pind, 1, MB_FIND_NONZERO); + l = ind - pind; + while (l--) + *r++ = *p++; + if (!ignoring) + { + /* rl ends up being assigned to prompt_visible_length, + which is the number of characters in the buffer that + contribute to characters on the screen, which might + not be the same as the number of physical characters + on the screen in the presence of multibyte characters */ + rl += ind - pind; + physchars += _rl_col_width (nprompt, pind, ind, 0); + } + else + ninvis += ind - pind; + p--; /* compensate for later increment */ + } + else +#endif + { + *r++ = *p; + if (!ignoring) + { + rl++; /* visible length byte counter */ + physchars++; + } + else + ninvis++; /* invisible chars byte counter */ + } + + if (invflset == 0 && physchars >= _rl_screenwidth) + { + invfl = ninvis; + invflset = 1; + } + + if (physchars >= (bound = (newlines + 1) * _rl_screenwidth) && local_prompt_newlines[newlines+1] == -1) + { + int new; + if (physchars > bound) /* should rarely happen */ + { +#if defined (HANDLE_MULTIBYTE) + *r = '\0'; /* need null-termination for strlen */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + new = _rl_find_prev_mbchar (ret, r - ret, MB_FIND_ANY); + else +#endif + new = r - ret - (physchars - bound); /* XXX */ + } + else + new = r - ret; + local_prompt_newlines[++newlines] = new; + } + } + } + + if (rl < _rl_screenwidth) + invfl = ninvis; + + *r = '\0'; + if (lp) + *lp = rl; + if (lip) + *lip = last; + if (niflp) + *niflp = invfl; + if (vlp) + *vlp = physchars; + + if (nprompt != pmt) + free (nprompt); + + return ret; +} + +/* Just strip out RL_PROMPT_START_IGNORE and RL_PROMPT_END_IGNORE from + PMT and return the rest of PMT. */ +char * +_rl_strip_prompt (char *pmt) +{ + char *ret; + + ret = expand_prompt (pmt, 0, (int *)NULL, (int *)NULL, (int *)NULL, (int *)NULL); + return ret; +} + +void +_rl_reset_prompt (void) +{ + rl_visible_prompt_length = rl_expand_prompt (rl_prompt); +} + +/* + * Expand the prompt string into the various display components, if + * necessary. + * + * local_prompt = expanded last line of string in rl_display_prompt + * (portion after the final newline) + * local_prompt_prefix = portion before last newline of rl_display_prompt, + * expanded via expand_prompt + * prompt_visible_length = number of visible characters in local_prompt + * prompt_prefix_length = number of visible characters in local_prompt_prefix + * + * It also tries to keep track of the number of invisible characters in the + * prompt string, and where they are. + * + * This function is called once per call to readline(). It may also be + * called arbitrarily to expand the primary prompt. + * + * The return value is the number of visible characters on the last line + * of the (possibly multi-line) prompt. In this case, multi-line means + * there are embedded newlines in the prompt string itself, not that the + * number of physical characters exceeds the screen width and the prompt + * wraps. + */ +int +rl_expand_prompt (char *prompt) +{ + char *p, *t; + int c; + + /* Clear out any saved values. */ + FREE (local_prompt); + FREE (local_prompt_prefix); + + local_prompt = local_prompt_prefix = (char *)0; + local_prompt_len = 0; + prompt_last_invisible = prompt_invis_chars_first_line = 0; + prompt_visible_length = prompt_physical_chars = 0; + + if (prompt == 0 || *prompt == 0) + return (0); + + p = strrchr (prompt, '\n'); + if (p == 0) + { + /* The prompt is only one logical line, though it might wrap. */ + local_prompt = expand_prompt (prompt, 0, &prompt_visible_length, + &prompt_last_invisible, + &prompt_invis_chars_first_line, + &prompt_physical_chars); + local_prompt_prefix = (char *)0; + local_prompt_len = local_prompt ? strlen (local_prompt) : 0; + return (prompt_visible_length); + } + else + { + /* The prompt spans multiple lines. */ + t = ++p; + local_prompt = expand_prompt (p, PMT_MULTILINE, + &prompt_visible_length, + &prompt_last_invisible, + &prompt_invis_chars_first_line, + &prompt_physical_chars); + c = *t; *t = '\0'; + /* The portion of the prompt string up to and including the + final newline is now null-terminated. */ + local_prompt_prefix = expand_prompt (prompt, PMT_MULTILINE, + &prompt_prefix_length, + (int *)NULL, + (int *)NULL, + (int *)NULL); + *t = c; + local_prompt_len = local_prompt ? strlen (local_prompt) : 0; + return (prompt_prefix_length); + } +} + +/* Initialize the VISIBLE_LINE and INVISIBLE_LINE arrays, and their associated + arrays of line break markers. MINSIZE is the minimum size of VISIBLE_LINE + and INVISIBLE_LINE; if it is greater than LINE_SIZE, LINE_SIZE is + increased. If the lines have already been allocated, this ensures that + they can hold at least MINSIZE characters. */ +static void +init_line_structures (int minsize) +{ + register int n; + int original_minsize = minsize; + + if (minsize <= _rl_screenwidth) /* XXX - for gdb */ + minsize = _rl_screenwidth + 1; + + if (invisible_line == 0) /* initialize it */ + { + if (line_size < minsize) + line_size = minsize; + visible_line = (char *)xmalloc (line_size); + invisible_line = (char *)xmalloc (line_size); + } + else if (line_size < minsize) /* ensure it can hold MINSIZE chars */ + { + line_size *= 2; + if (line_size < minsize) + line_size = minsize; + visible_line = (char *)xrealloc (visible_line, line_size); + invisible_line = (char *)xrealloc (invisible_line, line_size); + } + + for (n = original_minsize; n < line_size; n++) + { + visible_line[n] = 0; + invisible_line[n] = 1; + } + + if (vis_lbreaks == 0) + { + /* should be enough. */ + inv_lbsize = vis_lbsize = 256; + +#if defined (HANDLE_MULTIBYTE) + line_state_visible->wbsize = vis_lbsize; + line_state_visible->wrapped_line = (int *)xmalloc (line_state_visible->wbsize * sizeof (int)); + + line_state_invisible->wbsize = inv_lbsize; + line_state_invisible->wrapped_line = (int *)xmalloc (line_state_invisible->wbsize * sizeof (int)); +#endif + + inv_lbreaks = (int *)xmalloc (inv_lbsize * sizeof (int)); + vis_lbreaks = (int *)xmalloc (vis_lbsize * sizeof (int)); + inv_lbreaks[0] = vis_lbreaks[0] = 0; + } + + line_structures_initialized = 1; +} + +/* Basic redisplay algorithm. See comments inline. */ +void +rl_redisplay (void) +{ + register int in, out, c, linenum, cursor_linenum; + register char *line; + int inv_botlin, lb_botlin, lb_linenum, o_cpos; + int newlines, lpos, temp, n0, num, prompt_lines_estimate; + char *prompt_this_line; + int mb_cur_max = MB_CUR_MAX; +#if defined (HANDLE_MULTIBYTE) + wchar_t wc; + size_t wc_bytes; + int wc_width; + mbstate_t ps; + int _rl_wrapped_multicolumn = 0; +#endif + + if (_rl_echoing_p == 0) + return; + + /* Block keyboard interrupts because this function manipulates global + data structures. */ + _rl_block_sigint (); + RL_SETSTATE (RL_STATE_REDISPLAYING); + + if (!rl_display_prompt) + rl_display_prompt = ""; + + if (line_structures_initialized == 0) + { + init_line_structures (0); + rl_on_new_line (); + } + else if (line_size <= _rl_screenwidth) + init_line_structures (_rl_screenwidth + 1); + + /* Draw the line into the buffer. */ + cpos_buffer_position = -1; + + prompt_multibyte_chars = prompt_visible_length - prompt_physical_chars; + + line = invisible_line; + out = inv_botlin = 0; + + /* Mark the line as modified or not. We only do this for history + lines. */ + modmark = 0; + if (_rl_mark_modified_lines && current_history () && rl_undo_list) + { + line[out++] = '*'; + line[out] = '\0'; + modmark = 1; + } + + /* If someone thought that the redisplay was handled, but the currently + visible line has a different modification state than the one about + to become visible, then correct the caller's misconception. */ + if (visible_line[0] != invisible_line[0]) + rl_display_fixed = 0; + + /* If the prompt to be displayed is the `primary' readline prompt (the + one passed to readline()), use the values we have already expanded. + If not, use what's already in rl_display_prompt. WRAP_OFFSET is the + number of non-visible characters in the prompt string. */ + /* This is where we output the characters in the prompt before the last + newline, if any. If there aren't any embedded newlines, we don't + write anything. Copy the last line of the prompt string into the line in + any case */ + if (rl_display_prompt == rl_prompt || local_prompt) + { + if (local_prompt_prefix && forced_display) + _rl_output_some_chars (local_prompt_prefix, strlen (local_prompt_prefix)); + + if (local_prompt_len > 0) + { + temp = local_prompt_len + out + 2; + if (temp >= line_size) + { + line_size = (temp + 1024) - (temp % 1024); + visible_line = (char *)xrealloc (visible_line, line_size); + line = invisible_line = (char *)xrealloc (invisible_line, line_size); + } + strncpy (line + out, local_prompt, local_prompt_len); + out += local_prompt_len; + } + line[out] = '\0'; + wrap_offset = local_prompt_len - prompt_visible_length; + } + else + { + int pmtlen; + prompt_this_line = strrchr (rl_display_prompt, '\n'); + if (!prompt_this_line) + prompt_this_line = rl_display_prompt; + else + { + prompt_this_line++; + pmtlen = prompt_this_line - rl_display_prompt; /* temp var */ + if (forced_display) + { + _rl_output_some_chars (rl_display_prompt, pmtlen); + /* Make sure we are at column zero even after a newline, + regardless of the state of terminal output processing. */ + if (pmtlen < 2 || prompt_this_line[-2] != '\r') + cr (); + } + } + + prompt_physical_chars = pmtlen = strlen (prompt_this_line); + temp = pmtlen + out + 2; + if (temp >= line_size) + { + line_size = (temp + 1024) - (temp % 1024); + visible_line = (char *)xrealloc (visible_line, line_size); + line = invisible_line = (char *)xrealloc (invisible_line, line_size); + } + strncpy (line + out, prompt_this_line, pmtlen); + out += pmtlen; + line[out] = '\0'; + wrap_offset = prompt_invis_chars_first_line = 0; + } + +#if defined (HANDLE_MULTIBYTE) +#define CHECK_INV_LBREAKS() \ + do { \ + if (newlines >= (inv_lbsize - 2)) \ + { \ + inv_lbsize *= 2; \ + inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ + } \ + if (newlines >= (line_state_invisible->wbsize - 2)) \ + { \ + line_state_invisible->wbsize *= 2; \ + line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \ + } \ + } while (0) +#else +#define CHECK_INV_LBREAKS() \ + do { \ + if (newlines >= (inv_lbsize - 2)) \ + { \ + inv_lbsize *= 2; \ + inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ + } \ + } while (0) +#endif /* !HANDLE_MULTIBYTE */ + +#if defined (HANDLE_MULTIBYTE) +#define CHECK_LPOS() \ + do { \ + lpos++; \ + if (lpos >= _rl_screenwidth) \ + { \ + if (newlines >= (inv_lbsize - 2)) \ + { \ + inv_lbsize *= 2; \ + inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ + } \ + inv_lbreaks[++newlines] = out; \ + if (newlines >= (line_state_invisible->wbsize - 2)) \ + { \ + line_state_invisible->wbsize *= 2; \ + line_state_invisible->wrapped_line = (int *)xrealloc (line_state_invisible->wrapped_line, line_state_invisible->wbsize * sizeof(int)); \ + } \ + line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; \ + lpos = 0; \ + } \ + } while (0) +#else +#define CHECK_LPOS() \ + do { \ + lpos++; \ + if (lpos >= _rl_screenwidth) \ + { \ + if (newlines >= (inv_lbsize - 2)) \ + { \ + inv_lbsize *= 2; \ + inv_lbreaks = (int *)xrealloc (inv_lbreaks, inv_lbsize * sizeof (int)); \ + } \ + inv_lbreaks[++newlines] = out; \ + lpos = 0; \ + } \ + } while (0) +#endif + + /* inv_lbreaks[i] is where line i starts in the buffer. */ + inv_lbreaks[newlines = 0] = 0; + /* lpos is a physical cursor position, so it needs to be adjusted by the + number of invisible characters in the prompt, per line. We compute + the line breaks in the prompt string in expand_prompt, taking invisible + characters into account, and if lpos exceeds the screen width, we copy + the data in the loop below. */ + lpos = prompt_physical_chars + modmark; + +#if defined (HANDLE_MULTIBYTE) + memset (line_state_invisible->wrapped_line, 0, line_state_invisible->wbsize * sizeof (int)); + num = 0; +#endif + + /* prompt_invis_chars_first_line is the number of invisible characters in + the first physical line of the prompt. + wrap_offset - prompt_invis_chars_first_line is usually the number of + invis chars on the second (or, more generally, last) line. */ + + /* This is zero-based, used to set the newlines */ + prompt_lines_estimate = lpos / _rl_screenwidth; + + /* what if lpos is already >= _rl_screenwidth before we start drawing the + contents of the command line? */ + if (lpos >= _rl_screenwidth) + { + temp = 0; + + /* first copy the linebreaks array we computed in expand_prompt */ + while (local_prompt_newlines[newlines+1] != -1) + { + temp = local_prompt_newlines[newlines+1]; + inv_lbreaks[++newlines] = temp; + } + + /* Now set lpos from the last newline */ + if (mb_cur_max > 1 && rl_byte_oriented == 0 && prompt_multibyte_chars > 0) + lpos = _rl_col_width (local_prompt, temp, local_prompt_len, 1) - (wrap_offset - prompt_invis_chars_first_line); + else + lpos -= (_rl_screenwidth * newlines); + } + + prompt_last_screen_line = newlines; + + /* Draw the rest of the line (after the prompt) into invisible_line, keeping + track of where the cursor is (cpos_buffer_position), the number of the + line containing the cursor (lb_linenum), the last line number (lb_botlin + and inv_botlin). + It maintains an array of line breaks for display (inv_lbreaks). + This handles expanding tabs for display and displaying meta characters. */ + lb_linenum = 0; +#if defined (HANDLE_MULTIBYTE) + in = 0; + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + memset (&ps, 0, sizeof (mbstate_t)); + if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[0])) + { + wc = (wchar_t)rl_line_buffer[0]; + wc_bytes = 1; + } + else + wc_bytes = mbrtowc (&wc, rl_line_buffer, rl_end, &ps); + } + else + wc_bytes = 1; + while (in < rl_end) +#else + for (in = 0; in < rl_end; in++) +#endif + { + c = (unsigned char)rl_line_buffer[in]; + +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + if (MB_INVALIDCH (wc_bytes)) + { + /* Byte sequence is invalid or shortened. Assume that the + first byte represents a character. */ + wc_bytes = 1; + /* Assume that a character occupies a single column. */ + wc_width = 1; + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (wc_bytes)) + break; /* Found '\0' */ + else + { + temp = WCWIDTH (wc); + wc_width = (temp >= 0) ? temp : 1; + } + } +#endif + + if (out + 8 >= line_size) /* XXX - 8 for \t */ + { + line_size *= 2; + visible_line = (char *)xrealloc (visible_line, line_size); + invisible_line = (char *)xrealloc (invisible_line, line_size); + line = invisible_line; + } + + if (in == rl_point) + { + cpos_buffer_position = out; + lb_linenum = newlines; + } + +#if defined (HANDLE_MULTIBYTE) + if (META_CHAR (c) && _rl_output_meta_chars == 0) /* XXX - clean up */ +#else + if (META_CHAR (c)) +#endif + { + if (_rl_output_meta_chars == 0) + { + sprintf (line + out, "\\%o", c); + + if (lpos + 4 >= _rl_screenwidth) + { + temp = _rl_screenwidth - lpos; + CHECK_INV_LBREAKS (); + inv_lbreaks[++newlines] = out + temp; +#if defined (HANDLE_MULTIBYTE) + line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; +#endif + lpos = 4 - temp; + } + else + lpos += 4; + + out += 4; + } + else + { + line[out++] = c; + CHECK_LPOS(); + } + } +#if defined (DISPLAY_TABS) + else if (c == '\t') + { + register int newout; + +#if 0 + newout = (out | (int)7) + 1; +#else + newout = out + 8 - lpos % 8; +#endif + temp = newout - out; + if (lpos + temp >= _rl_screenwidth) + { + register int temp2; + temp2 = _rl_screenwidth - lpos; + CHECK_INV_LBREAKS (); + inv_lbreaks[++newlines] = out + temp2; +#if defined (HANDLE_MULTIBYTE) + line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; +#endif + lpos = temp - temp2; + while (out < newout) + line[out++] = ' '; + } + else + { + while (out < newout) + line[out++] = ' '; + lpos += temp; + } + } +#endif + else if (c == '\n' && _rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up) + { + line[out++] = '\0'; /* XXX - sentinel */ + CHECK_INV_LBREAKS (); + inv_lbreaks[++newlines] = out; +#if defined (HANDLE_MULTIBYTE) + line_state_invisible->wrapped_line[newlines] = _rl_wrapped_multicolumn; +#endif + lpos = 0; + } + else if (CTRL_CHAR (c) || c == RUBOUT) + { + line[out++] = '^'; + CHECK_LPOS(); + line[out++] = CTRL_CHAR (c) ? UNCTRL (c) : '?'; + CHECK_LPOS(); + } + else + { +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + register int i; + + _rl_wrapped_multicolumn = 0; + + if (_rl_screenwidth < lpos + wc_width) + for (i = lpos; i < _rl_screenwidth; i++) + { + /* The space will be removed in update_line() */ + line[out++] = ' '; + _rl_wrapped_multicolumn++; + CHECK_LPOS(); + } + if (in == rl_point) + { + cpos_buffer_position = out; + lb_linenum = newlines; + } + for (i = in; i < in+wc_bytes; i++) + line[out++] = rl_line_buffer[i]; + for (i = 0; i < wc_width; i++) + CHECK_LPOS(); + } + else + { + line[out++] = c; + CHECK_LPOS(); + } +#else + line[out++] = c; + CHECK_LPOS(); +#endif + } + +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + in += wc_bytes; + if (_rl_utf8locale && UTF8_SINGLEBYTE(rl_line_buffer[in])) + { + wc = (wchar_t)rl_line_buffer[in]; + wc_bytes = 1; + memset (&ps, 0, sizeof (mbstate_t)); /* re-init state */ + } + else + wc_bytes = mbrtowc (&wc, rl_line_buffer + in, rl_end - in, &ps); + } + else + in++; +#endif + } + line[out] = '\0'; + line_totbytes = out; + if (cpos_buffer_position < 0) + { + cpos_buffer_position = out; + lb_linenum = newlines; + } + + inv_botlin = lb_botlin = _rl_inv_botlin = newlines; + CHECK_INV_LBREAKS (); + inv_lbreaks[newlines+1] = out; +#if defined (HANDLE_MULTIBYTE) + /* This should be 0 anyway */ + line_state_invisible->wrapped_line[newlines+1] = _rl_wrapped_multicolumn; +#endif + cursor_linenum = lb_linenum; + + /* CPOS_BUFFER_POSITION == position in buffer where cursor should be placed. + CURSOR_LINENUM == line number where the cursor should be placed. */ + + /* PWP: now is when things get a bit hairy. The visible and invisible + line buffers are really multiple lines, which would wrap every + (screenwidth - 1) characters. Go through each in turn, finding + the changed region and updating it. The line order is top to bottom. */ + + /* If we can move the cursor up and down, then use multiple lines, + otherwise, let long lines display in a single terminal line, and + horizontally scroll it. */ + displaying_prompt_first_line = 1; + if (_rl_horizontal_scroll_mode == 0 && _rl_term_up && *_rl_term_up) + { + int nleft, pos, changed_screen_line, tx; + + if (!rl_display_fixed || forced_display) + { + forced_display = 0; + + /* If we have more than a screenful of material to display, then + only display a screenful. We should display the last screen, + not the first. */ + if (out >= _rl_screenchars) + { +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + out = _rl_find_prev_mbchar (line, _rl_screenchars, MB_FIND_ANY); + else +#endif + out = _rl_screenchars - 1; + } + + /* The first line is at character position 0 in the buffer. The + second and subsequent lines start at inv_lbreaks[N], offset by + OFFSET (which has already been calculated above). */ + +#define INVIS_FIRST() (prompt_physical_chars > _rl_screenwidth ? prompt_invis_chars_first_line : wrap_offset) +#define WRAP_OFFSET(line, offset) ((line == 0) \ + ? (offset ? INVIS_FIRST() : 0) \ + : ((line == prompt_last_screen_line) ? wrap_offset-prompt_invis_chars_first_line : 0)) +#define W_OFFSET(line, offset) ((line) == 0 ? offset : 0) +#define VIS_LLEN(l) ((l) > _rl_vis_botlin ? 0 : (vis_lbreaks[l+1] - vis_lbreaks[l])) +#define INV_LLEN(l) (inv_lbreaks[l+1] - inv_lbreaks[l]) +#define VIS_CHARS(line) (visible_line + vis_lbreaks[line]) +#define VIS_LINE(line) ((line) > _rl_vis_botlin) ? "" : VIS_CHARS(line) +#define INV_LINE(line) (invisible_line + inv_lbreaks[line]) + +#define OLD_CPOS_IN_PROMPT() (cpos_adjusted == 0 && \ + _rl_last_c_pos != o_cpos && \ + _rl_last_c_pos > wrap_offset && \ + o_cpos < prompt_last_invisible) + + /* For each line in the buffer, do the updating display. */ + for (linenum = 0; linenum <= inv_botlin; linenum++) + { + /* This can lead us astray if we execute a program that changes + the locale from a non-multibyte to a multibyte one. */ + o_cpos = _rl_last_c_pos; + cpos_adjusted = 0; + update_line (VIS_LINE(linenum), INV_LINE(linenum), linenum, + VIS_LLEN(linenum), INV_LLEN(linenum), inv_botlin); + + /* update_line potentially changes _rl_last_c_pos, but doesn't + take invisible characters into account, since _rl_last_c_pos + is an absolute cursor position in a multibyte locale. We + choose to (mostly) compensate for that here, rather than + change update_line itself. There are several cases in which + update_line adjusts _rl_last_c_pos itself (so it can pass + _rl_move_cursor_relative accurate values); it communicates + this back by setting cpos_adjusted. If we assume that + _rl_last_c_pos is correct (an absolute cursor position) each + time update_line is called, then we can assume in our + calculations that o_cpos does not need to be adjusted by + wrap_offset. */ + if (linenum == 0 && (mb_cur_max > 1 && rl_byte_oriented == 0) && OLD_CPOS_IN_PROMPT()) + _rl_last_c_pos -= prompt_invis_chars_first_line; /* XXX - was wrap_offset */ + else if (cpos_adjusted == 0 && + linenum == prompt_last_screen_line && + prompt_physical_chars > _rl_screenwidth && + (mb_cur_max > 1 && rl_byte_oriented == 0) && + _rl_last_c_pos != o_cpos && + _rl_last_c_pos > (prompt_last_invisible - _rl_screenwidth - prompt_invis_chars_first_line)) /* XXX - rethink this last one */ + /* This assumes that all the invisible characters are split + between the first and last lines of the prompt, if the + prompt consumes more than two lines. It's usually right */ + /* XXX - not sure this is ever executed */ + _rl_last_c_pos -= (wrap_offset-prompt_invis_chars_first_line); + + /* If this is the line with the prompt, we might need to + compensate for invisible characters in the new line. Do + this only if there is not more than one new line (which + implies that we completely overwrite the old visible line) + and the new line is shorter than the old. Make sure we are + at the end of the new line before clearing. */ + if (linenum == 0 && + inv_botlin == 0 && _rl_last_c_pos == out && + (wrap_offset > visible_wrap_offset) && + (_rl_last_c_pos < visible_first_line_len)) + { + if (mb_cur_max > 1 && rl_byte_oriented == 0) + nleft = _rl_screenwidth - _rl_last_c_pos; + else + nleft = _rl_screenwidth + wrap_offset - _rl_last_c_pos; + if (nleft) + _rl_clear_to_eol (nleft); + } +#if 0 + /* This segment is intended to handle the case where the prompt + has invisible characters on the second line and the new line + to be displayed needs to clear the rest of the old characters + out (e.g., when printing the i-search prompt). In general, + the case of the new line being shorter than the old. + Incomplete */ + else if (linenum == prompt_last_screen_line && + prompt_physical_chars > _rl_screenwidth && + wrap_offset != prompt_invis_chars_first_line && + _rl_last_c_pos == out && +#endif + + + /* Since the new first line is now visible, save its length. */ + if (linenum == 0) + visible_first_line_len = (inv_botlin > 0) ? inv_lbreaks[1] : out - wrap_offset; + } + + /* We may have deleted some lines. If so, clear the left over + blank ones at the bottom out. */ + if (_rl_vis_botlin > inv_botlin) + { + char *tt; + for (; linenum <= _rl_vis_botlin; linenum++) + { + tt = VIS_CHARS (linenum); + _rl_move_vert (linenum); + _rl_move_cursor_relative (0, tt); + _rl_clear_to_eol + ((linenum == _rl_vis_botlin) ? strlen (tt) : _rl_screenwidth); + } + } + _rl_vis_botlin = inv_botlin; + + /* CHANGED_SCREEN_LINE is set to 1 if we have moved to a + different screen line during this redisplay. */ + changed_screen_line = _rl_last_v_pos != cursor_linenum; + if (changed_screen_line) + { + _rl_move_vert (cursor_linenum); + /* If we moved up to the line with the prompt using _rl_term_up, + the physical cursor position on the screen stays the same, + but the buffer position needs to be adjusted to account + for invisible characters. */ + if ((mb_cur_max == 1 || rl_byte_oriented) && cursor_linenum == 0 && wrap_offset) + _rl_last_c_pos += wrap_offset; + } + + /* Now we move the cursor to where it needs to be. First, make + sure we are on the correct line (cursor_linenum). */ + + /* We have to reprint the prompt if it contains invisible + characters, since it's not generally OK to just reprint + the characters from the current cursor position. But we + only need to reprint it if the cursor is before the last + invisible character in the prompt string. */ + nleft = prompt_visible_length + wrap_offset; + if (cursor_linenum == 0 && wrap_offset > 0 && _rl_last_c_pos > 0 && +#if 0 + _rl_last_c_pos <= PROMPT_ENDING_INDEX && local_prompt) +#else + _rl_last_c_pos < PROMPT_ENDING_INDEX && local_prompt) +#endif + { +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + if (_rl_term_cr) + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + if (modmark) + _rl_output_some_chars ("*", 1); + + _rl_output_some_chars (local_prompt, nleft); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + _rl_last_c_pos = _rl_col_width (local_prompt, 0, nleft, 1) - wrap_offset + modmark; + else + _rl_last_c_pos = nleft + modmark; + } + + /* Where on that line? And where does that line start + in the buffer? */ + pos = inv_lbreaks[cursor_linenum]; + /* nleft == number of characters in the line buffer between the + start of the line and the desired cursor position. */ + nleft = cpos_buffer_position - pos; + + /* NLEFT is now a number of characters in a buffer. When in a + multibyte locale, however, _rl_last_c_pos is an absolute cursor + position that doesn't take invisible characters in the prompt + into account. We use a fudge factor to compensate. */ + + /* Since _rl_backspace() doesn't know about invisible characters in + the prompt, and there's no good way to tell it, we compensate for + those characters here and call _rl_backspace() directly if + necessary */ + if (wrap_offset && cursor_linenum == 0 && nleft < _rl_last_c_pos) + { + /* TX == new physical cursor position in multibyte locale. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + tx = _rl_col_width (&visible_line[pos], 0, nleft, 1) - visible_wrap_offset; + else + tx = nleft; + if (tx >= 0 && _rl_last_c_pos > tx) + { + _rl_backspace (_rl_last_c_pos - tx); /* XXX */ + _rl_last_c_pos = tx; + } + } + + /* We need to note that in a multibyte locale we are dealing with + _rl_last_c_pos as an absolute cursor position, but moving to a + point specified by a buffer position (NLEFT) that doesn't take + invisible characters into account. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + _rl_move_cursor_relative (nleft, &invisible_line[pos]); + else if (nleft != _rl_last_c_pos) + _rl_move_cursor_relative (nleft, &invisible_line[pos]); + } + } + else /* Do horizontal scrolling. Much simpler */ + { +#define M_OFFSET(margin, offset) ((margin) == 0 ? offset : 0) + int lmargin, ndisp, nleft, phys_c_pos, t; + + /* Always at top line. */ + _rl_last_v_pos = 0; + + /* Compute where in the buffer the displayed line should start. This + will be LMARGIN. */ + + /* The number of characters that will be displayed before the cursor. */ + ndisp = cpos_buffer_position - wrap_offset; + nleft = prompt_visible_length + wrap_offset; + /* Where the new cursor position will be on the screen. This can be + longer than SCREENWIDTH; if it is, lmargin will be adjusted. */ + phys_c_pos = cpos_buffer_position - (last_lmargin ? last_lmargin : wrap_offset); + t = _rl_screenwidth / 3; + + /* If the number of characters had already exceeded the screenwidth, + last_lmargin will be > 0. */ + + /* If the number of characters to be displayed is more than the screen + width, compute the starting offset so that the cursor is about + two-thirds of the way across the screen. */ + if (phys_c_pos > _rl_screenwidth - 2) + { + lmargin = cpos_buffer_position - (2 * t); + if (lmargin < 0) + lmargin = 0; + /* If the left margin would be in the middle of a prompt with + invisible characters, don't display the prompt at all. */ + if (wrap_offset && lmargin > 0 && lmargin < nleft) + lmargin = nleft; + } + else if (ndisp < _rl_screenwidth - 2) /* XXX - was -1 */ + lmargin = 0; + else if (phys_c_pos < 1) + { + /* If we are moving back towards the beginning of the line and + the last margin is no longer correct, compute a new one. */ + lmargin = ((cpos_buffer_position - 1) / t) * t; /* XXX */ + if (wrap_offset && lmargin > 0 && lmargin < nleft) + lmargin = nleft; + } + else + lmargin = last_lmargin; + + displaying_prompt_first_line = lmargin < nleft; + + /* If the first character on the screen isn't the first character + in the display line, indicate this with a special character. */ + if (lmargin > 0) + line[lmargin] = '<'; + + /* If SCREENWIDTH characters starting at LMARGIN do not encompass + the whole line, indicate that with a special character at the + right edge of the screen. If LMARGIN is 0, we need to take the + wrap offset into account. */ + t = lmargin + M_OFFSET (lmargin, wrap_offset) + _rl_screenwidth; + if (t > 0 && t < out) + line[t - 1] = '>'; + + if (rl_display_fixed == 0 || forced_display || lmargin != last_lmargin) + { + forced_display = 0; + o_cpos = _rl_last_c_pos; + cpos_adjusted = 0; + update_line (&visible_line[last_lmargin], + &invisible_line[lmargin], + 0, + _rl_screenwidth + visible_wrap_offset, + _rl_screenwidth + (lmargin ? 0 : wrap_offset), + 0); + + if ((mb_cur_max > 1 && rl_byte_oriented == 0) && + displaying_prompt_first_line && OLD_CPOS_IN_PROMPT()) + _rl_last_c_pos -= prompt_invis_chars_first_line; /* XXX - was wrap_offset */ + + /* If the visible new line is shorter than the old, but the number + of invisible characters is greater, and we are at the end of + the new line, we need to clear to eol. */ + t = _rl_last_c_pos - M_OFFSET (lmargin, wrap_offset); + if ((M_OFFSET (lmargin, wrap_offset) > visible_wrap_offset) && + (_rl_last_c_pos == out) && displaying_prompt_first_line && + t < visible_first_line_len) + { + nleft = _rl_screenwidth - t; + _rl_clear_to_eol (nleft); + } + visible_first_line_len = out - lmargin - M_OFFSET (lmargin, wrap_offset); + if (visible_first_line_len > _rl_screenwidth) + visible_first_line_len = _rl_screenwidth; + + _rl_move_cursor_relative (cpos_buffer_position - lmargin, &invisible_line[lmargin]); + last_lmargin = lmargin; + } + } + fflush (rl_outstream); + + /* Swap visible and non-visible lines. */ + { + struct line_state *vtemp = line_state_visible; + + line_state_visible = line_state_invisible; + line_state_invisible = vtemp; + + rl_display_fixed = 0; + /* If we are displaying on a single line, and last_lmargin is > 0, we + are not displaying any invisible characters, so set visible_wrap_offset + to 0. */ + if (_rl_horizontal_scroll_mode && last_lmargin) + visible_wrap_offset = 0; + else + visible_wrap_offset = wrap_offset; + } + + RL_UNSETSTATE (RL_STATE_REDISPLAYING); + _rl_release_sigint (); +} + +/* PWP: update_line() is based on finding the middle difference of each + line on the screen; vis: + + /old first difference + /beginning of line | /old last same /old EOL + v v v v +old: eddie> Oh, my little gruntle-buggy is to me, as lurgid as +new: eddie> Oh, my little buggy says to me, as lurgid as + ^ ^ ^ ^ + \beginning of line | \new last same \new end of line + \new first difference + + All are character pointers for the sake of speed. Special cases for + no differences, as well as for end of line additions must be handled. + + Could be made even smarter, but this works well enough */ +static void +update_line (char *old, char *new, int current_line, int omax, int nmax, int inv_botlin) +{ + register char *ofd, *ols, *oe, *nfd, *nls, *ne; + int temp, lendiff, wsatend, od, nd, twidth, o_cpos; + int current_invis_chars; + int col_lendiff, col_temp; + int bytes_to_insert; + int mb_cur_max = MB_CUR_MAX; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps_new, ps_old; + int new_offset, old_offset; +#endif + + /* If we're at the right edge of a terminal that supports xn, we're + ready to wrap around, so do so. This fixes problems with knowing + the exact cursor position and cut-and-paste with certain terminal + emulators. In this calculation, TEMP is the physical screen + position of the cursor. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + temp = _rl_last_c_pos; + else + temp = _rl_last_c_pos - WRAP_OFFSET (_rl_last_v_pos, visible_wrap_offset); + if (temp == _rl_screenwidth && _rl_term_autowrap && !_rl_horizontal_scroll_mode + && _rl_last_v_pos == current_line - 1) + { + /* We're going to wrap around by writing the first character of NEW to + the screen and dealing with changes to what's visible by modifying + OLD to match it. Complicated by the presence of multi-width + characters at the end of the line or beginning of the new one. */ + /* old is always somewhere in visible_line; new is always somewhere in + invisible_line. These should always be null-terminated. */ +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + wchar_t wc; + mbstate_t ps; + int oldwidth, newwidth; + int oldbytes, newbytes; + size_t ret; + + /* This fixes only double-column characters, but if the wrapped + character consumes more than three columns, spaces will be + inserted in the string buffer. */ + /* XXX remember that we are working on the invisible line right now; + we don't swap visible and invisible until just before rl_redisplay + returns */ + /* This will remove the extra placeholder space we added with + _rl_wrapped_multicolumn */ + if (current_line < line_state_invisible->wbsize && line_state_invisible->wrapped_line[current_line] > 0) + _rl_clear_to_eol (line_state_invisible->wrapped_line[current_line]); + + /* 1. how many screen positions does first char in old consume? */ + memset (&ps, 0, sizeof (mbstate_t)); + ret = mbrtowc (&wc, old, mb_cur_max, &ps); + oldbytes = ret; + if (MB_INVALIDCH (ret)) + { + oldwidth = 1; + oldbytes = 1; + } + else if (MB_NULLWCH (ret)) + oldwidth = 0; + else + oldwidth = WCWIDTH (wc); + if (oldwidth < 0) + oldwidth = 1; + + /* 2. how many screen positions does the first char in new consume? */ + memset (&ps, 0, sizeof (mbstate_t)); + ret = mbrtowc (&wc, new, mb_cur_max, &ps); + newbytes = ret; + if (MB_INVALIDCH (ret)) + { + newwidth = 1; + newbytes = 1; + } + else if (MB_NULLWCH (ret)) + newwidth = 0; + else + newwidth = WCWIDTH (wc); + if (newwidth < 0) + newwidth = 1; + + /* 3. if the new width is less than the old width, we need to keep + going in new until we have consumed at least that many screen + positions, and figure out how many bytes that will take */ + while (newbytes < nmax && newwidth < oldwidth) + { + int t; + + ret = mbrtowc (&wc, new+newbytes, mb_cur_max, &ps); + if (MB_INVALIDCH (ret)) + { + newwidth += 1; + newbytes += 1; + } + else if (MB_NULLWCH (ret)) + break; + else + { + t = WCWIDTH (wc); + newwidth += (t >= 0) ? t : 1; + newbytes += ret; + } + } + /* 4. If the new width is more than the old width, keep going in old + until we have consumed exactly that many screen positions, and + figure out how many bytes that will take. This is an optimization */ + while (oldbytes < omax && oldwidth < newwidth) + { + int t; + + ret = mbrtowc (&wc, old+oldbytes, mb_cur_max, &ps); + if (MB_INVALIDCH (ret)) + { + oldwidth += 1; + oldbytes += 1; + } + else if (MB_NULLWCH (ret)) + break; + else + { + t = WCWIDTH (wc); + oldwidth += (t >= 0) ? t : 1; + oldbytes += ret; + } + } + /* 5. write the first newbytes of new, which takes newwidth. This is + where the screen wrapping takes place, and we are now writing + characters onto the new line. We need to fix up old so it + accurately reflects what is on the screen after the + _rl_output_some_chars below. */ + if (newwidth > 0) + { + int count, i, j; + char *optr; + + _rl_output_some_chars (new, newbytes); + _rl_last_c_pos = newwidth; + _rl_last_v_pos++; + + /* 5a. If the number of screen positions doesn't match, punt + and do a dumb update. */ + if (newwidth != oldwidth) + { + ne = new + nmax; + nd = newbytes; + nfd = new + nd; + goto dumb_update; + } + if (oldbytes != 0 && newbytes != 0) + { + /* We have written as many bytes from new as we need to + consume the first character of old. Fix up `old' so it + reflects the new screen contents. We use +1 in the + memmove call to copy the trailing NUL. */ + memmove (old+newbytes, old+oldbytes, strlen (old+oldbytes) + 1); + memcpy (old, new, newbytes); + j = newbytes - oldbytes; + + omax += j; + /* Fix up indices if we copy data from one line to another */ + for (i = current_line+1; i <= inv_botlin+1; i++) + vis_lbreaks[i] += j; + } + } + else + { + putc (' ', rl_outstream); + _rl_last_c_pos = 1; + _rl_last_v_pos++; + if (old[0] && new[0]) + old[0] = new[0]; + } + } + else +#endif + { + if (new[0]) + putc (new[0], rl_outstream); + else + putc (' ', rl_outstream); + _rl_last_c_pos = 1; + _rl_last_v_pos++; + if (old[0] && new[0]) + old[0] = new[0]; + } + } + + /* Find first difference. */ +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + /* See if the old line is a subset of the new line, so that the + only change is adding characters. */ + temp = (omax < nmax) ? omax : nmax; + if (memcmp (old, new, temp) == 0) /* adding at the end */ + { + new_offset = old_offset = temp; + ofd = old + temp; + nfd = new + temp; + } + else + { + memset (&ps_new, 0, sizeof(mbstate_t)); + memset (&ps_old, 0, sizeof(mbstate_t)); + + /* Are the old and new lines the same? */ + if (omax == nmax && STREQN (new, old, omax)) + { + old_offset = omax; + new_offset = nmax; + ofd = old + omax; + nfd = new + nmax; + } + else + { + /* Go through the line from the beginning and find the first + difference. */ + new_offset = old_offset = 0; + for (ofd = old, nfd = new; + (ofd - old < omax) && *ofd && + _rl_compare_chars(old, old_offset, &ps_old, new, new_offset, &ps_new); ) + { + old_offset = _rl_find_next_mbchar (old, old_offset, 1, MB_FIND_ANY); + new_offset = _rl_find_next_mbchar (new, new_offset, 1, MB_FIND_ANY); + + ofd = old + old_offset; + nfd = new + new_offset; + } + } + } + } + else +#endif + for (ofd = old, nfd = new; + (ofd - old < omax) && *ofd && (*ofd == *nfd); + ofd++, nfd++) + ; + + /* Move to the end of the screen line. ND and OD are used to keep track + of the distance between ne and new and oe and old, respectively, to + move a subtraction out of each loop. */ + for (od = ofd - old, oe = ofd; od < omax && *oe; oe++, od++); + for (nd = nfd - new, ne = nfd; nd < nmax && *ne; ne++, nd++); + + /* If no difference, continue to next line. */ + if (ofd == oe && nfd == ne) + return; + +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0 && _rl_utf8locale) + { + wchar_t wc; + mbstate_t ps = { 0 }; + int t; + + /* If the first character in the difference is a zero-width character, + assume it's a combining character and back one up so the two base + characters no longer compare equivalently. */ + t = mbrtowc (&wc, ofd, mb_cur_max, &ps); + if (t > 0 && UNICODE_COMBINING_CHAR (wc) && WCWIDTH (wc) == 0) + { + old_offset = _rl_find_prev_mbchar (old, ofd - old, MB_FIND_ANY); + new_offset = _rl_find_prev_mbchar (new, nfd - new, MB_FIND_ANY); + ofd = old + old_offset; /* equal by definition */ + nfd = new + new_offset; + } + } +#endif + + wsatend = 1; /* flag for trailing whitespace */ + +#if defined (HANDLE_MULTIBYTE) + /* Find the last character that is the same between the two lines. This + bounds the region that needs to change. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + ols = old + _rl_find_prev_mbchar (old, oe - old, MB_FIND_ANY); + nls = new + _rl_find_prev_mbchar (new, ne - new, MB_FIND_ANY); + + while ((ols > ofd) && (nls > nfd)) + { + memset (&ps_old, 0, sizeof (mbstate_t)); + memset (&ps_new, 0, sizeof (mbstate_t)); + +#if 0 + /* On advice from jir@yamato.ibm.com */ + _rl_adjust_point (old, ols - old, &ps_old); + _rl_adjust_point (new, nls - new, &ps_new); +#endif + + if (_rl_compare_chars (old, ols - old, &ps_old, new, nls - new, &ps_new) == 0) + break; + + if (*ols == ' ') + wsatend = 0; + + ols = old + _rl_find_prev_mbchar (old, ols - old, MB_FIND_ANY); + nls = new + _rl_find_prev_mbchar (new, nls - new, MB_FIND_ANY); + } + } + else + { +#endif /* HANDLE_MULTIBYTE */ + ols = oe - 1; /* find last same */ + nls = ne - 1; + while ((ols > ofd) && (nls > nfd) && (*ols == *nls)) + { + if (*ols != ' ') + wsatend = 0; + ols--; + nls--; + } +#if defined (HANDLE_MULTIBYTE) + } +#endif + + if (wsatend) + { + ols = oe; + nls = ne; + } +#if defined (HANDLE_MULTIBYTE) + /* This may not work for stateful encoding, but who cares? To handle + stateful encoding properly, we have to scan each string from the + beginning and compare. */ + else if (_rl_compare_chars (ols, 0, NULL, nls, 0, NULL) == 0) +#else + else if (*ols != *nls) +#endif + { + if (*ols) /* don't step past the NUL */ + { + if (mb_cur_max > 1 && rl_byte_oriented == 0) + ols = old + _rl_find_next_mbchar (old, ols - old, 1, MB_FIND_ANY); + else + ols++; + } + if (*nls) + { + if (mb_cur_max > 1 && rl_byte_oriented == 0) + nls = new + _rl_find_next_mbchar (new, nls - new, 1, MB_FIND_ANY); + else + nls++; + } + } + + /* count of invisible characters in the current invisible line. */ + current_invis_chars = W_OFFSET (current_line, wrap_offset); + if (_rl_last_v_pos != current_line) + { + _rl_move_vert (current_line); + /* We have moved up to a new screen line. This line may or may not have + invisible characters on it, but we do our best to recalculate + visible_wrap_offset based on what we know. */ + if (current_line == 0) + visible_wrap_offset = prompt_invis_chars_first_line; /* XXX */ + if ((mb_cur_max == 1 || rl_byte_oriented) && current_line == 0 && visible_wrap_offset) + _rl_last_c_pos += visible_wrap_offset; + } + + /* If this is the first line and there are invisible characters in the + prompt string, and the prompt string has not changed, and the current + cursor position is before the last invisible character in the prompt, + and the index of the character to move to is past the end of the prompt + string, then redraw the entire prompt string. We can only do this + reliably if the terminal supports a `cr' capability. + + This can also happen if the prompt string has changed, and the first + difference in the line is in the middle of the prompt string, after a + sequence of invisible characters (worst case) and before the end of + the prompt. In this case, we have to redraw the entire prompt string + so that the entire sequence of invisible characters is drawn. We need + to handle the worst case, when the difference is after (or in the middle + of) a sequence of invisible characters that changes the text color and + before the sequence that restores the text color to normal. Then we have + to make sure that the lines still differ -- if they don't, we can + return immediately. + + This is not an efficiency hack -- there is a problem with redrawing + portions of the prompt string if they contain terminal escape + sequences (like drawing the `unbold' sequence without a corresponding + `bold') that manifests itself on certain terminals. */ + + lendiff = local_prompt_len; + if (lendiff > nmax) + lendiff = nmax; + od = ofd - old; /* index of first difference in visible line */ + nd = nfd - new; /* nd, od are buffer indexes */ + if (current_line == 0 && !_rl_horizontal_scroll_mode && + _rl_term_cr && lendiff > prompt_visible_length && _rl_last_c_pos > 0 && + (((od > 0 || nd > 0) && (od <= prompt_last_invisible || nd <= prompt_last_invisible)) || + ((od >= lendiff) && _rl_last_c_pos < PROMPT_ENDING_INDEX))) + { +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + if (modmark) + _rl_output_some_chars ("*", 1); + _rl_output_some_chars (local_prompt, lendiff); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + /* We take wrap_offset into account here so we can pass correct + information to _rl_move_cursor_relative. */ + _rl_last_c_pos = _rl_col_width (local_prompt, 0, lendiff, 1) - wrap_offset + modmark; + cpos_adjusted = 1; + } + else + _rl_last_c_pos = lendiff + modmark; + + /* Now if we have printed the prompt string because the first difference + was within the prompt, see if we need to recompute where the lines + differ. Check whether where we are now is past the last place where + the old and new lines are the same and short-circuit now if we are. */ + if ((od <= prompt_last_invisible || nd <= prompt_last_invisible) && + omax == nmax && + lendiff > (ols-old) && lendiff > (nls-new)) + return; + + /* XXX - we need to fix up our calculations if we are now past the + old ofd/nfd and the prompt length (or line length) has changed. + We punt on the problem and do a dumb update. We'd like to be able + to just output the prompt from the beginning of the line up to the + first difference, but you don't know the number of invisible + characters in that case. + This needs a lot of work to be efficient. */ + if ((od <= prompt_last_invisible || nd <= prompt_last_invisible)) + { + nfd = new + lendiff; /* number of characters we output above */ + nd = lendiff; + + /* Do a dumb update and return */ +dumb_update: + temp = ne - nfd; + if (temp > 0) + { + _rl_output_some_chars (nfd, temp); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + _rl_last_c_pos += _rl_col_width (new, nd, ne - new, 1); + /* Need to adjust here based on wrap_offset. Guess that if + this is the line containing the last line of the prompt + we need to adjust by + wrap_offset-prompt_invis_chars_first_line + on the assumption that this is the number of invisible + characters in the last line of the prompt. */ + if (wrap_offset > prompt_invis_chars_first_line && + current_line == prompt_last_screen_line && + prompt_physical_chars > _rl_screenwidth && + _rl_horizontal_scroll_mode == 0) + { + _rl_last_c_pos -= wrap_offset - prompt_invis_chars_first_line; + cpos_adjusted = 1; + } + } + else + _rl_last_c_pos += temp; + } + if (nmax < omax) + goto clear_rest_of_line; /* XXX */ + else + return; + } + } + + o_cpos = _rl_last_c_pos; + + /* When this function returns, _rl_last_c_pos is correct, and an absolute + cursor position in multibyte mode, but a buffer index when not in a + multibyte locale. */ + _rl_move_cursor_relative (od, old); + +#if defined (HANDLE_MULTIBYTE) + /* We need to indicate that the cursor position is correct in the presence of + invisible characters in the prompt string. Let's see if setting this when + we make sure we're at the end of the drawn prompt string works. */ + if (current_line == 0 && mb_cur_max > 1 && rl_byte_oriented == 0 && + (_rl_last_c_pos > 0 || o_cpos > 0) && + _rl_last_c_pos == prompt_physical_chars) + cpos_adjusted = 1; +#endif + + /* if (len (new) > len (old)) + lendiff == difference in buffer (bytes) + col_lendiff == difference on screen (columns) + When not using multibyte characters, these are equal */ + lendiff = (nls - nfd) - (ols - ofd); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + col_lendiff = _rl_col_width (new, nfd - new, nls - new, 1) - _rl_col_width (old, ofd - old, ols - old, 1); + else + col_lendiff = lendiff; + + /* If we are changing the number of invisible characters in a line, and + the spot of first difference is before the end of the invisible chars, + lendiff needs to be adjusted. */ + if (current_line == 0 && /* !_rl_horizontal_scroll_mode && */ + current_invis_chars != visible_wrap_offset) + { + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + lendiff += visible_wrap_offset - current_invis_chars; + col_lendiff += visible_wrap_offset - current_invis_chars; + } + else + { + lendiff += visible_wrap_offset - current_invis_chars; + col_lendiff = lendiff; + } + } + + /* We use temp as a count of the number of bytes from the first difference + to the end of the new line. col_temp is the corresponding number of + screen columns. A `dumb' update moves to the spot of first difference + and writes TEMP bytes. */ + /* Insert (diff (len (old), len (new)) ch. */ + temp = ne - nfd; + if (mb_cur_max > 1 && rl_byte_oriented == 0) + col_temp = _rl_col_width (new, nfd - new, ne - new, 1); + else + col_temp = temp; + + /* how many bytes from the new line buffer to write to the display */ + bytes_to_insert = nls - nfd; + + /* col_lendiff > 0 if we are adding characters to the line */ + if (col_lendiff > 0) /* XXX - was lendiff */ + { + /* Non-zero if we're increasing the number of lines. */ + int gl = current_line >= _rl_vis_botlin && inv_botlin > _rl_vis_botlin; + + /* If col_lendiff is > 0, implying that the new string takes up more + screen real estate than the old, but lendiff is < 0, meaning that it + takes fewer bytes, we need to just output the characters starting + from the first difference. These will overwrite what is on the + display, so there's no reason to do a smart update. This can really + only happen in a multibyte environment. */ + if (lendiff < 0) + { + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += col_temp; /* XXX - was _rl_col_width (nfd, 0, temp, 1); */ + /* If nfd begins before any invisible characters in the prompt, + adjust _rl_last_c_pos to account for wrap_offset and set + cpos_adjusted to let the caller know. */ + if (current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) + { + _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ + cpos_adjusted = 1; + } + return; + } + /* Sometimes it is cheaper to print the characters rather than + use the terminal's capabilities. If we're growing the number + of lines, make sure we actually cause the new line to wrap + around on auto-wrapping terminals. */ + else if (_rl_terminal_can_insert && ((2 * col_temp) >= col_lendiff || _rl_term_IC) && (!_rl_term_autowrap || !gl)) + { + /* If lendiff > prompt_visible_length and _rl_last_c_pos == 0 and + _rl_horizontal_scroll_mode == 1, inserting the characters with + _rl_term_IC or _rl_term_ic will screw up the screen because of the + invisible characters. We need to just draw them. */ + /* The same thing happens if we're trying to draw before the last + invisible character in the prompt string or we're increasing the + number of invisible characters in the line and we're not drawing + the entire prompt string. */ + if (*ols && ((_rl_horizontal_scroll_mode && + _rl_last_c_pos == 0 && + lendiff > prompt_visible_length && + current_invis_chars > 0) == 0) && + (((mb_cur_max > 1 && rl_byte_oriented == 0) && + current_line == 0 && wrap_offset && + ((nfd - new) <= prompt_last_invisible) && + (col_lendiff < prompt_visible_length)) == 0) && + (visible_wrap_offset >= current_invis_chars)) + { + open_some_spaces (col_lendiff); + _rl_output_some_chars (nfd, bytes_to_insert); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + _rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1); + else + _rl_last_c_pos += bytes_to_insert; + } + else if ((mb_cur_max == 1 || rl_byte_oriented != 0) && *ols == 0 && lendiff > 0) + { + /* At the end of a line the characters do not have to + be "inserted". They can just be placed on the screen. */ + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += col_temp; + return; + } + else /* just write from first difference to end of new line */ + { + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += col_temp; + /* If nfd begins before the last invisible character in the + prompt, adjust _rl_last_c_pos to account for wrap_offset + and set cpos_adjusted to let the caller know. */ + if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) + { + _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ + cpos_adjusted = 1; + } + return; + } + + if (bytes_to_insert > lendiff) + { + /* If nfd begins before the last invisible character in the + prompt, adjust _rl_last_c_pos to account for wrap_offset + and set cpos_adjusted to let the caller know. */ + if ((mb_cur_max > 1 && rl_byte_oriented == 0) && current_line == 0 && displaying_prompt_first_line && wrap_offset && ((nfd - new) <= prompt_last_invisible)) + { + _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ + cpos_adjusted = 1; + } + } + } + else + { + /* cannot insert chars, write to EOL */ + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += col_temp; + /* If we're in a multibyte locale and were before the last invisible + char in the current line (which implies we just output some invisible + characters) we need to adjust _rl_last_c_pos, since it represents + a physical character position. */ + /* The current_line*rl_screenwidth+prompt_invis_chars_first_line is a + crude attempt to compute how far into the new line buffer we are. + It doesn't work well in the face of multibyte characters and needs + to be rethought. XXX */ + if ((mb_cur_max > 1 && rl_byte_oriented == 0) && + current_line == prompt_last_screen_line && wrap_offset && + displaying_prompt_first_line && + wrap_offset != prompt_invis_chars_first_line && + ((nfd-new) < (prompt_last_invisible-(current_line*_rl_screenwidth+prompt_invis_chars_first_line)))) + { + _rl_last_c_pos -= wrap_offset - prompt_invis_chars_first_line; + cpos_adjusted = 1; + } + } + } + else /* Delete characters from line. */ + { + /* If possible and inexpensive to use terminal deletion, then do so. */ + if (_rl_term_dc && (2 * col_temp) >= -col_lendiff) + { + /* If all we're doing is erasing the invisible characters in the + prompt string, don't bother. It screws up the assumptions + about what's on the screen. */ + if (_rl_horizontal_scroll_mode && _rl_last_c_pos == 0 && + displaying_prompt_first_line && + -lendiff == visible_wrap_offset) + col_lendiff = 0; + + /* If we have moved lmargin and we're shrinking the line, we've + already moved the cursor to the first character of the new line, + so deleting -col_lendiff characters will mess up the cursor + position calculation */ + if (_rl_horizontal_scroll_mode && displaying_prompt_first_line == 0 && + col_lendiff && _rl_last_c_pos < -col_lendiff) + col_lendiff = 0; + + if (col_lendiff) + delete_chars (-col_lendiff); /* delete (diff) characters */ + + /* Copy (new) chars to screen from first diff to last match, + overwriting what is there. */ + if (bytes_to_insert > 0) + { + /* If nfd begins at the prompt, or before the invisible + characters in the prompt, we need to adjust _rl_last_c_pos + in a multibyte locale to account for the wrap offset and + set cpos_adjusted accordingly. */ + _rl_output_some_chars (nfd, bytes_to_insert); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + _rl_last_c_pos += _rl_col_width (nfd, 0, bytes_to_insert, 1); + if (current_line == 0 && wrap_offset && + displaying_prompt_first_line && + _rl_last_c_pos >= wrap_offset && /* XXX was > */ + ((nfd - new) <= prompt_last_invisible)) + { + _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ + cpos_adjusted = 1; + } + +#if 1 +#ifdef HANDLE_MULTIBYTE + /* If we write a non-space into the last screen column, + remove the note that we added a space to compensate for + a multibyte double-width character that didn't fit, since + it's only valid for what was previously there. */ + /* XXX - watch this */ + if (_rl_last_c_pos == _rl_screenwidth && + line_state_invisible->wrapped_line[current_line+1] && + nfd[bytes_to_insert-1] != ' ') + line_state_invisible->wrapped_line[current_line+1] = 0; +#endif +#endif + } + else + _rl_last_c_pos += bytes_to_insert; + + /* XXX - we only want to do this if we are at the end of the line + so we move there with _rl_move_cursor_relative */ + if (_rl_horizontal_scroll_mode && ((oe-old) > (ne-new))) + { + _rl_move_cursor_relative (ne-new, new); + goto clear_rest_of_line; + } + } + } + /* Otherwise, print over the existing material. */ + else + { + if (temp > 0) + { + /* If nfd begins at the prompt, or before the invisible + characters in the prompt, we need to adjust _rl_last_c_pos + in a multibyte locale to account for the wrap offset and + set cpos_adjusted accordingly. */ + _rl_output_some_chars (nfd, temp); + _rl_last_c_pos += col_temp; /* XXX */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + if (current_line == 0 && wrap_offset && + displaying_prompt_first_line && + _rl_last_c_pos > wrap_offset && + ((nfd - new) <= prompt_last_invisible)) + { + _rl_last_c_pos -= wrap_offset; /* XXX - prompt_invis_chars_first_line? */ + cpos_adjusted = 1; + } + } + } +clear_rest_of_line: + lendiff = (oe - old) - (ne - new); + if (mb_cur_max > 1 && rl_byte_oriented == 0) + col_lendiff = _rl_col_width (old, 0, oe - old, 1) - _rl_col_width (new, 0, ne - new, 1); + else + col_lendiff = lendiff; + + /* If we've already printed over the entire width of the screen, + including the old material, then col_lendiff doesn't matter and + space_to_eol will insert too many spaces. XXX - maybe we should + adjust col_lendiff based on the difference between _rl_last_c_pos + and _rl_screenwidth */ + if (col_lendiff && ((mb_cur_max == 1 || rl_byte_oriented) || (_rl_last_c_pos < _rl_screenwidth))) + { + if (_rl_term_autowrap && current_line < inv_botlin) + space_to_eol (col_lendiff); + else + _rl_clear_to_eol (col_lendiff); + } + } + } +} + +/* Tell the update routines that we have moved onto a new (empty) line. */ +int +rl_on_new_line (void) +{ + if (visible_line) + visible_line[0] = '\0'; + + _rl_last_c_pos = _rl_last_v_pos = 0; + _rl_vis_botlin = last_lmargin = 0; + if (vis_lbreaks) + vis_lbreaks[0] = vis_lbreaks[1] = 0; + visible_wrap_offset = 0; + return 0; +} + +/* Clear all screen lines occupied by the current readline line buffer + (visible line) */ +int +rl_clear_visible_line (void) +{ + int curr_line; + + /* Make sure we move to column 0 so we clear the entire line */ +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + _rl_last_c_pos = 0; + + /* Move to the last screen line of the current visible line */ + _rl_move_vert (_rl_vis_botlin); + + /* And erase screen lines going up to line 0 (first visible line) */ + for (curr_line = _rl_last_v_pos; curr_line >= 0; curr_line--) + { + _rl_move_vert (curr_line); + _rl_clear_to_eol (0); + } + + return 0; +} + +/* Tell the update routines that we have moved onto a new line with the + prompt already displayed. Code originally from the version of readline + distributed with CLISP. rl_expand_prompt must have already been called + (explicitly or implicitly). This still doesn't work exactly right; it + should use expand_prompt() */ +int +rl_on_new_line_with_prompt (void) +{ + int prompt_size, i, l, real_screenwidth, newlines; + char *prompt_last_line, *lprompt; + + /* Initialize visible_line and invisible_line to ensure that they can hold + the already-displayed prompt. */ + prompt_size = strlen (rl_prompt) + 1; + init_line_structures (prompt_size); + + /* Make sure the line structures hold the already-displayed prompt for + redisplay. */ + lprompt = local_prompt ? local_prompt : rl_prompt; + strcpy (visible_line, lprompt); + strcpy (invisible_line, lprompt); + + /* If the prompt contains newlines, take the last tail. */ + prompt_last_line = strrchr (rl_prompt, '\n'); + if (!prompt_last_line) + prompt_last_line = rl_prompt; + + l = strlen (prompt_last_line); + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + _rl_last_c_pos = _rl_col_width (prompt_last_line, 0, l, 1); /* XXX */ + else + _rl_last_c_pos = l; + + /* Dissect prompt_last_line into screen lines. Note that here we have + to use the real screenwidth. Readline's notion of screenwidth might be + one less, see terminal.c. */ + real_screenwidth = _rl_screenwidth + (_rl_term_autowrap ? 0 : 1); + _rl_last_v_pos = l / real_screenwidth; + /* If the prompt length is a multiple of real_screenwidth, we don't know + whether the cursor is at the end of the last line, or already at the + beginning of the next line. Output a newline just to be safe. */ + if (l > 0 && (l % real_screenwidth) == 0) + _rl_output_some_chars ("\n", 1); + last_lmargin = 0; + + newlines = 0; i = 0; + while (i <= l) + { + _rl_vis_botlin = newlines; + vis_lbreaks[newlines++] = i; + i += real_screenwidth; + } + vis_lbreaks[newlines] = l; + visible_wrap_offset = 0; + + rl_display_prompt = rl_prompt; /* XXX - make sure it's set */ + + return 0; +} + +/* Actually update the display, period. */ +int +rl_forced_update_display (void) +{ + register char *temp; + + if (visible_line) + { + temp = visible_line; + while (*temp) + *temp++ = '\0'; + } + rl_on_new_line (); + forced_display++; + (*rl_redisplay_function) (); + return 0; +} + +/* Redraw only the last line of a multi-line prompt. */ +void +rl_redraw_prompt_last_line (void) +{ + char *t; + + t = strrchr (rl_display_prompt, '\n'); + if (t) + redraw_prompt (++t); + else + rl_forced_update_display (); +} + +/* Move the cursor from _rl_last_c_pos to NEW, which are buffer indices. + (Well, when we don't have multibyte characters, _rl_last_c_pos is a + buffer index.) + DATA is the contents of the screen line of interest; i.e., where + the movement is being done. + DATA is always the visible line or the invisible line */ +void +_rl_move_cursor_relative (int new, const char *data) +{ + register int i; + int woff; /* number of invisible chars on current line */ + int cpos, dpos; /* current and desired cursor positions */ + int adjust; + int in_invisline; + int mb_cur_max = MB_CUR_MAX; + + woff = WRAP_OFFSET (_rl_last_v_pos, wrap_offset); + cpos = _rl_last_c_pos; + + if (cpos == 0 && cpos == new) + return; + +#if defined (HANDLE_MULTIBYTE) + /* If we have multibyte characters, NEW is indexed by the buffer point in + a multibyte string, but _rl_last_c_pos is the display position. In + this case, NEW's display position is not obvious and must be + calculated. We need to account for invisible characters in this line, + as long as we are past them and they are counted by _rl_col_width. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + adjust = 1; + /* Try to short-circuit common cases and eliminate a bunch of multibyte + character function calls. */ + /* 1. prompt string */ + if (new == local_prompt_len && memcmp (data, local_prompt, new) == 0) + { + dpos = prompt_physical_chars; + cpos_adjusted = 1; + adjust = 0; + } + /* 2. prompt_string + line contents */ + else if (new > local_prompt_len && local_prompt && memcmp (data, local_prompt, local_prompt_len) == 0) + { + dpos = prompt_physical_chars + _rl_col_width (data, local_prompt_len, new, 1); + cpos_adjusted = 1; + adjust = 0; + } + else + dpos = _rl_col_width (data, 0, new, 1); + + if (displaying_prompt_first_line == 0) + adjust = 0; + + /* yet another special case: printing the last line of a prompt with + multibyte characters and invisible characters whose printable length + exceeds the screen width with the last invisible character + (prompt_last_invisible) in the last line. IN_INVISLINE is the + offset of DATA in invisible_line */ + in_invisline = 0; + if (data > invisible_line && data < invisible_line+inv_lbreaks[_rl_inv_botlin+1]) + in_invisline = data - invisible_line; + + /* Use NEW when comparing against the last invisible character in the + prompt string, since they're both buffer indices and DPOS is a + desired display position. */ + /* NEW is relative to the current displayed line, while + PROMPT_LAST_INVISIBLE is relative to the entire (wrapped) line. + Need a way to reconcile these two variables by turning NEW into a + buffer position relative to the start of the line */ + if (adjust && ((new > prompt_last_invisible) || /* XXX - don't use woff here */ + (new+in_invisline > prompt_last_invisible) || /* invisible line */ + (prompt_physical_chars >= _rl_screenwidth && /* visible line */ + _rl_last_v_pos == prompt_last_screen_line && + wrap_offset >= woff && dpos >= woff && + new > (prompt_last_invisible-(vis_lbreaks[_rl_last_v_pos])-wrap_offset)))) + /* XXX last comparison might need to be >= */ + { + dpos -= woff; + /* Since this will be assigned to _rl_last_c_pos at the end (more + precisely, _rl_last_c_pos == dpos when this function returns), + let the caller know. */ + cpos_adjusted = 1; + } + } + else +#endif + dpos = new; + + /* If we don't have to do anything, then return. */ + if (cpos == dpos) + return; + + /* It may be faster to output a CR, and then move forwards instead + of moving backwards. */ + /* i == current physical cursor position. */ +#if defined (HANDLE_MULTIBYTE) + if (mb_cur_max > 1 && rl_byte_oriented == 0) + i = _rl_last_c_pos; + else +#endif + i = _rl_last_c_pos - woff; + if (dpos == 0 || CR_FASTER (dpos, _rl_last_c_pos) || + (_rl_term_autowrap && i == _rl_screenwidth)) + { +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif /* !__MSDOS__ */ + cpos = _rl_last_c_pos = 0; + } + + if (cpos < dpos) + { + /* Move the cursor forward. We do it by printing the command + to move the cursor forward if there is one, else print that + portion of the output buffer again. Which is cheaper? */ + + /* The above comment is left here for posterity. It is faster + to print one character (non-control) than to print a control + sequence telling the terminal to move forward one character. + That kind of control is for people who don't know what the + data is underneath the cursor. */ + + /* However, we need a handle on where the current display position is + in the buffer for the immediately preceding comment to be true. + In multibyte locales, we don't currently have that info available. + Without it, we don't know where the data we have to display begins + in the buffer and we have to go back to the beginning of the screen + line. In this case, we can use the terminal sequence to move forward + if it's available. */ + if (mb_cur_max > 1 && rl_byte_oriented == 0) + { + if (_rl_term_forward_char) + { + for (i = cpos; i < dpos; i++) + tputs (_rl_term_forward_char, 1, _rl_output_character_function); + } + else + { + tputs (_rl_term_cr, 1, _rl_output_character_function); + for (i = 0; i < new; i++) + putc (data[i], rl_outstream); + } + } + else + for (i = cpos; i < new; i++) + putc (data[i], rl_outstream); + } + +#if defined (HANDLE_MULTIBYTE) + /* NEW points to the buffer point, but _rl_last_c_pos is the display point. + The byte length of the string is probably bigger than the column width + of the string, which means that if NEW == _rl_last_c_pos, then NEW's + display point is less than _rl_last_c_pos. */ +#endif + else if (cpos > dpos) + _rl_backspace (cpos - dpos); + + _rl_last_c_pos = dpos; +} + +/* PWP: move the cursor up or down. */ +void +_rl_move_vert (int to) +{ + register int delta, i; + + if (_rl_last_v_pos == to || to > _rl_screenheight) + return; + + if ((delta = to - _rl_last_v_pos) > 0) + { + for (i = 0; i < delta; i++) + putc ('\n', rl_outstream); +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + _rl_last_c_pos = 0; + } + else + { /* delta < 0 */ +#ifdef __DJGPP__ + int row, col; + + fflush (rl_outstream); + ScreenGetCursor (&row, &col); + ScreenSetCursor (row + delta, col); + i = -delta; +#else + if (_rl_term_up && *_rl_term_up) + for (i = 0; i < -delta; i++) + tputs (_rl_term_up, 1, _rl_output_character_function); +#endif /* !__DJGPP__ */ + } + + _rl_last_v_pos = to; /* Now TO is here */ +} + +/* Physically print C on rl_outstream. This is for functions which know + how to optimize the display. Return the number of characters output. */ +int +rl_show_char (int c) +{ + int n = 1; + if (META_CHAR (c) && (_rl_output_meta_chars == 0)) + { + fprintf (rl_outstream, "M-"); + n += 2; + c = UNMETA (c); + } + +#if defined (DISPLAY_TABS) + if ((CTRL_CHAR (c) && c != '\t') || c == RUBOUT) +#else + if (CTRL_CHAR (c) || c == RUBOUT) +#endif /* !DISPLAY_TABS */ + { + fprintf (rl_outstream, "C-"); + n += 2; + c = CTRL_CHAR (c) ? UNCTRL (c) : '?'; + } + + putc (c, rl_outstream); + fflush (rl_outstream); + return n; +} + +int +rl_character_len (int c, int pos) +{ + unsigned char uc; + + uc = (unsigned char)c; + + if (META_CHAR (uc)) + return ((_rl_output_meta_chars == 0) ? 4 : 1); + + if (uc == '\t') + { +#if defined (DISPLAY_TABS) + return (((pos | 7) + 1) - pos); +#else + return (2); +#endif /* !DISPLAY_TABS */ + } + + if (CTRL_CHAR (c) || c == RUBOUT) + return (2); + + return ((ISPRINT (uc)) ? 1 : 2); +} +/* How to print things in the "echo-area". The prompt is treated as a + mini-modeline. */ +static int msg_saved_prompt = 0; + +#if defined (USE_VARARGS) +int +#if defined (PREFER_STDARG) +rl_message (const char *format, ...) +#else +rl_message (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif +#if defined (HAVE_VSNPRINTF) + int bneed; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + if (msg_buf == 0) + msg_buf = xmalloc (msg_bufsiz = 128); + +#if defined (HAVE_VSNPRINTF) + bneed = vsnprintf (msg_buf, msg_bufsiz, format, args); + if (bneed >= msg_bufsiz - 1) + { + msg_bufsiz = bneed + 1; + msg_buf = xrealloc (msg_buf, msg_bufsiz); + va_end (args); + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + vsnprintf (msg_buf, msg_bufsiz - 1, format, args); + } +#else + vsprintf (msg_buf, format, args); + msg_buf[msg_bufsiz - 1] = '\0'; /* overflow? */ +#endif + va_end (args); + + if (saved_local_prompt == 0) + { + rl_save_prompt (); + msg_saved_prompt = 1; + } + else if (local_prompt != saved_local_prompt) + { + FREE (local_prompt); + FREE (local_prompt_prefix); + local_prompt = (char *)NULL; + } + rl_display_prompt = msg_buf; + local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length, + &prompt_last_invisible, + &prompt_invis_chars_first_line, + &prompt_physical_chars); + local_prompt_prefix = (char *)NULL; + local_prompt_len = local_prompt ? strlen (local_prompt) : 0; + (*rl_redisplay_function) (); + + return 0; +} +#else /* !USE_VARARGS */ +int +rl_message (format, arg1, arg2) + char *format; +{ + if (msg_buf == 0) + msg_buf = xmalloc (msg_bufsiz = 128); + + sprintf (msg_buf, format, arg1, arg2); + msg_buf[msg_bufsiz - 1] = '\0'; /* overflow? */ + + rl_display_prompt = msg_buf; + if (saved_local_prompt == 0) + { + rl_save_prompt (); + msg_saved_prompt = 1; + } + else if (local_prompt != saved_local_prompt) + { + FREE (local_prompt); + FREE (local_prompt_prefix); + local_prompt = (char *)NULL; + } + local_prompt = expand_prompt (msg_buf, 0, &prompt_visible_length, + &prompt_last_invisible, + &prompt_invis_chars_first_line, + &prompt_physical_chars); + local_prompt_prefix = (char *)NULL; + local_prompt_len = local_prompt ? strlen (local_prompt) : 0; + (*rl_redisplay_function) (); + + return 0; +} +#endif /* !USE_VARARGS */ + +/* How to clear things from the "echo-area". */ +int +rl_clear_message (void) +{ + rl_display_prompt = rl_prompt; + if (msg_saved_prompt) + { + rl_restore_prompt (); + msg_saved_prompt = 0; + } + (*rl_redisplay_function) (); + return 0; +} + +int +rl_reset_line_state (void) +{ + rl_on_new_line (); + + rl_display_prompt = rl_prompt ? rl_prompt : ""; + forced_display = 1; + return 0; +} + +/* Save all of the variables associated with the prompt and its display. Most + of the complexity is dealing with the invisible characters in the prompt + string and where they are. There are enough of these that I should consider + a struct. */ +void +rl_save_prompt (void) +{ + saved_local_prompt = local_prompt; + saved_local_prefix = local_prompt_prefix; + saved_prefix_length = prompt_prefix_length; + saved_local_length = local_prompt_len; + saved_last_invisible = prompt_last_invisible; + saved_visible_length = prompt_visible_length; + saved_invis_chars_first_line = prompt_invis_chars_first_line; + saved_physical_chars = prompt_physical_chars; + saved_local_prompt_newlines = local_prompt_newlines; + + local_prompt = local_prompt_prefix = (char *)0; + local_prompt_len = 0; + local_prompt_newlines = (int *)0; + + prompt_last_invisible = prompt_visible_length = prompt_prefix_length = 0; + prompt_invis_chars_first_line = prompt_physical_chars = 0; +} + +void +rl_restore_prompt (void) +{ + FREE (local_prompt); + FREE (local_prompt_prefix); + FREE (local_prompt_newlines); + + local_prompt = saved_local_prompt; + local_prompt_prefix = saved_local_prefix; + local_prompt_len = saved_local_length; + local_prompt_newlines = saved_local_prompt_newlines; + + prompt_prefix_length = saved_prefix_length; + prompt_last_invisible = saved_last_invisible; + prompt_visible_length = saved_visible_length; + prompt_invis_chars_first_line = saved_invis_chars_first_line; + prompt_physical_chars = saved_physical_chars; + + /* can test saved_local_prompt to see if prompt info has been saved. */ + saved_local_prompt = saved_local_prefix = (char *)0; + saved_local_length = 0; + saved_last_invisible = saved_visible_length = saved_prefix_length = 0; + saved_invis_chars_first_line = saved_physical_chars = 0; + saved_local_prompt_newlines = 0; +} + +char * +_rl_make_prompt_for_search (int pchar) +{ + int len; + char *pmt, *p; + + rl_save_prompt (); + + /* We've saved the prompt, and can do anything with the various prompt + strings we need before they're restored. We want the unexpanded + portion of the prompt string after any final newline. */ + p = rl_prompt ? strrchr (rl_prompt, '\n') : 0; + if (p == 0) + { + len = (rl_prompt && *rl_prompt) ? strlen (rl_prompt) : 0; + pmt = (char *)xmalloc (len + 2); + if (len) + strcpy (pmt, rl_prompt); + pmt[len] = pchar; + pmt[len+1] = '\0'; + } + else + { + p++; + len = strlen (p); + pmt = (char *)xmalloc (len + 2); + if (len) + strcpy (pmt, p); + pmt[len] = pchar; + pmt[len+1] = '\0'; + } + + /* will be overwritten by expand_prompt, called from rl_message */ + prompt_physical_chars = saved_physical_chars + 1; + return pmt; +} + +/* Quick redisplay hack when erasing characters at the end of the line. */ +void +_rl_erase_at_end_of_line (int l) +{ + register int i; + + _rl_backspace (l); + for (i = 0; i < l; i++) + putc (' ', rl_outstream); + _rl_backspace (l); + for (i = 0; i < l; i++) + visible_line[--_rl_last_c_pos] = '\0'; + rl_display_fixed++; +} + +/* Clear to the end of the line. COUNT is the minimum + number of character spaces to clear, but we use a terminal escape + sequence if available. */ +void +_rl_clear_to_eol (int count) +{ +#ifndef __MSDOS__ + if (_rl_term_clreol) + tputs (_rl_term_clreol, 1, _rl_output_character_function); + else +#endif + if (count) + space_to_eol (count); +} + +/* Clear to the end of the line using spaces. COUNT is the minimum + number of character spaces to clear, */ +static void +space_to_eol (int count) +{ + register int i; + + for (i = 0; i < count; i++) + putc (' ', rl_outstream); + + _rl_last_c_pos += count; +} + +void +_rl_clear_screen (void) +{ +#if defined (__DJGPP__) + ScreenClear (); + ScreenSetCursor (0, 0); +#else + if (_rl_term_clrpag) + tputs (_rl_term_clrpag, 1, _rl_output_character_function); + else + rl_crlf (); +#endif /* __DJGPP__ */ +} + +/* Insert COUNT characters from STRING to the output stream at column COL. */ +static void +insert_some_chars (char *string, int count, int col) +{ + open_some_spaces (col); + _rl_output_some_chars (string, count); +} + +/* Insert COL spaces, keeping the cursor at the same position. We follow the + ncurses documentation and use either im/ei with explicit spaces, or IC/ic + by itself. We assume there will either be ei or we don't need to use it. */ +static void +open_some_spaces (int col) +{ +#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION)) + char *buffer; + register int i; + + /* If IC is defined, then we do not have to "enter" insert mode. */ + if (_rl_term_IC) + { + buffer = tgoto (_rl_term_IC, 0, col); + tputs (buffer, 1, _rl_output_character_function); + } + else if (_rl_term_im && *_rl_term_im) + { + tputs (_rl_term_im, 1, _rl_output_character_function); + /* just output the desired number of spaces */ + for (i = col; i--; ) + _rl_output_character_function (' '); + /* If there is a string to turn off insert mode, use it now. */ + if (_rl_term_ei && *_rl_term_ei) + tputs (_rl_term_ei, 1, _rl_output_character_function); + /* and move back the right number of spaces */ + _rl_backspace (col); + } + else if (_rl_term_ic && *_rl_term_ic) + { + /* If there is a special command for inserting characters, then + use that first to open up the space. */ + for (i = col; i--; ) + tputs (_rl_term_ic, 1, _rl_output_character_function); + } +#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/ +} + +/* Delete COUNT characters from the display line. */ +static void +delete_chars (int count) +{ + if (count > _rl_screenwidth) /* XXX */ + return; + +#if !defined (__MSDOS__) && (!defined (__MINGW32__) || defined (NCURSES_VERSION)) + if (_rl_term_DC && *_rl_term_DC) + { + char *buffer; + buffer = tgoto (_rl_term_DC, count, count); + tputs (buffer, count, _rl_output_character_function); + } + else + { + if (_rl_term_dc && *_rl_term_dc) + while (count--) + tputs (_rl_term_dc, 1, _rl_output_character_function); + } +#endif /* !__MSDOS__ && (!__MINGW32__ || NCURSES_VERSION)*/ +} + +void +_rl_update_final (void) +{ + int full_lines, woff, botline_length; + + full_lines = 0; + /* If the cursor is the only thing on an otherwise-blank last line, + compensate so we don't print an extra CRLF. */ + if (_rl_vis_botlin && _rl_last_c_pos == 0 && + visible_line[vis_lbreaks[_rl_vis_botlin]] == 0) + { + _rl_vis_botlin--; + full_lines = 1; + } + _rl_move_vert (_rl_vis_botlin); + woff = W_OFFSET(_rl_vis_botlin, wrap_offset); + botline_length = VIS_LLEN(_rl_vis_botlin) - woff; + /* If we've wrapped lines, remove the final xterm line-wrap flag. */ + if (full_lines && _rl_term_autowrap && botline_length == _rl_screenwidth) + { + char *last_line; + + /* LAST_LINE includes invisible characters, so if you want to get the + last character of the first line, you have to take WOFF into account. + This needs to be done for both calls to _rl_move_cursor_relative, + which takes a buffer position as the first argument, and any direct + subscripts of LAST_LINE. */ + last_line = &visible_line[vis_lbreaks[_rl_vis_botlin]]; /* = VIS_CHARS(_rl_vis_botlin); */ + cpos_buffer_position = -1; /* don't know where we are in buffer */ + _rl_move_cursor_relative (_rl_screenwidth - 1 + woff, last_line); /* XXX */ + _rl_clear_to_eol (0); + putc (last_line[_rl_screenwidth - 1 + woff], rl_outstream); + } + _rl_vis_botlin = 0; + if (botline_length > 0 || _rl_last_c_pos > 0) + rl_crlf (); + fflush (rl_outstream); + rl_display_fixed++; +} + +/* Move to the start of the current line. */ +static void +cr (void) +{ + if (_rl_term_cr) + { +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + _rl_last_c_pos = 0; + } +} + +/* Redraw the last line of a multi-line prompt that may possibly contain + terminal escape sequences. Called with the cursor at column 0 of the + line to draw the prompt on. */ +static void +redraw_prompt (char *t) +{ + char *oldp; + + oldp = rl_display_prompt; + rl_save_prompt (); + + rl_display_prompt = t; + local_prompt = expand_prompt (t, PMT_MULTILINE, + &prompt_visible_length, + &prompt_last_invisible, + &prompt_invis_chars_first_line, + &prompt_physical_chars); + local_prompt_prefix = (char *)NULL; + local_prompt_len = local_prompt ? strlen (local_prompt) : 0; + + rl_forced_update_display (); + + rl_display_prompt = oldp; + rl_restore_prompt(); +} + +/* Redisplay the current line after a SIGWINCH is received. */ +void +_rl_redisplay_after_sigwinch (void) +{ + char *t; + + /* Clear the last line (assuming that the screen size change will result in + either more or fewer characters on that line only) and put the cursor at + column 0. Make sure the right thing happens if we have wrapped to a new + screen line. */ + if (_rl_term_cr) + { + _rl_move_vert (_rl_vis_botlin); + +#if defined (__MSDOS__) + putc ('\r', rl_outstream); +#else + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif + _rl_last_c_pos = 0; +#if defined (__MSDOS__) + space_to_eol (_rl_screenwidth); + putc ('\r', rl_outstream); +#else + if (_rl_term_clreol) + tputs (_rl_term_clreol, 1, _rl_output_character_function); + else + { + space_to_eol (_rl_screenwidth); + tputs (_rl_term_cr, 1, _rl_output_character_function); + } +#endif + if (_rl_last_v_pos > 0) + _rl_move_vert (0); + } + else + rl_crlf (); + + /* Redraw only the last line of a multi-line prompt. */ + t = strrchr (rl_display_prompt, '\n'); + if (t) + redraw_prompt (++t); + else + rl_forced_update_display (); +} + +void +_rl_clean_up_for_exit (void) +{ + if (_rl_echoing_p) + { + if (_rl_vis_botlin > 0) /* minor optimization plus bug fix */ + _rl_move_vert (_rl_vis_botlin); + _rl_vis_botlin = 0; + fflush (rl_outstream); + rl_restart_output (1, 0); + } +} + +void +_rl_erase_entire_line (void) +{ + cr (); + _rl_clear_to_eol (0); + cr (); + fflush (rl_outstream); +} + +void +_rl_ttyflush (void) +{ + fflush (rl_outstream); +} + +/* return the `current display line' of the cursor -- the number of lines to + move up to get to the first screen line of the current readline line. */ +int +_rl_current_display_line (void) +{ + int ret, nleft; + + /* Find out whether or not there might be invisible characters in the + editing buffer. */ + if (rl_display_prompt == rl_prompt) + nleft = _rl_last_c_pos - _rl_screenwidth - rl_visible_prompt_length; + else + nleft = _rl_last_c_pos - _rl_screenwidth; + + if (nleft > 0) + ret = 1 + nleft / _rl_screenwidth; + else + ret = 0; + + return ret; +} + +#if defined (HANDLE_MULTIBYTE) +/* Calculate the number of screen columns occupied by STR from START to END. + In the case of multibyte characters with stateful encoding, we have to + scan from the beginning of the string to take the state into account. */ +static int +_rl_col_width (const char *str, int start, int end, int flags) +{ + wchar_t wc; + mbstate_t ps; + int tmp, point, width, max; + + if (end <= start) + return 0; + if (MB_CUR_MAX == 1 || rl_byte_oriented) + /* this can happen in some cases where it's inconvenient to check */ + return (end - start); + + memset (&ps, 0, sizeof (mbstate_t)); + + point = 0; + max = end; + + /* Try to short-circuit common cases. The adjustment to remove wrap_offset + is done by the caller. */ + /* 1. prompt string */ + if (flags && start == 0 && end == local_prompt_len && memcmp (str, local_prompt, local_prompt_len) == 0) + return (prompt_physical_chars + wrap_offset); + /* 2. prompt string + line contents */ + else if (flags && start == 0 && local_prompt_len > 0 && end > local_prompt_len && local_prompt && memcmp (str, local_prompt, local_prompt_len) == 0) + { + tmp = prompt_physical_chars + wrap_offset; + /* XXX - try to call ourselves recursively with non-prompt portion */ + tmp += _rl_col_width (str, local_prompt_len, end, flags); + return (tmp); + } + + while (point < start) + { + if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point])) + { + memset (&ps, 0, sizeof (mbstate_t)); + tmp = 1; + } + else + tmp = mbrlen (str + point, max, &ps); + if (MB_INVALIDCH ((size_t)tmp)) + { + /* In this case, the bytes are invalid or too short to compose a + multibyte character, so we assume that the first byte represents + a single character. */ + point++; + max--; + + /* Clear the state of the byte sequence, because in this case the + effect of mbstate is undefined. */ + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (tmp)) + break; /* Found '\0' */ + else + { + point += tmp; + max -= tmp; + } + } + + /* If START is not a byte that starts a character, then POINT will be + greater than START. In this case, assume that (POINT - START) gives + a byte count that is the number of columns of difference. */ + width = point - start; + + while (point < end) + { + if (_rl_utf8locale && UTF8_SINGLEBYTE(str[point])) + { + tmp = 1; + wc = (wchar_t) str[point]; + } + else + tmp = mbrtowc (&wc, str + point, max, &ps); + if (MB_INVALIDCH ((size_t)tmp)) + { + /* In this case, the bytes are invalid or too short to compose a + multibyte character, so we assume that the first byte represents + a single character. */ + point++; + max--; + + /* and assume that the byte occupies a single column. */ + width++; + + /* Clear the state of the byte sequence, because in this case the + effect of mbstate is undefined. */ + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (tmp)) + break; /* Found '\0' */ + else + { + point += tmp; + max -= tmp; + tmp = WCWIDTH(wc); + width += (tmp >= 0) ? tmp : 1; + } + } + + width += point - end; + + return width; +} +#endif /* HANDLE_MULTIBYTE */ diff --git a/readline/readline/doc/ChangeLog.gdb b/readline/readline/doc/ChangeLog.gdb new file mode 100644 index 0000000000..70ee9c4ebd --- /dev/null +++ b/readline/readline/doc/ChangeLog.gdb @@ -0,0 +1,94 @@ +2019-10-23 Jan Kratochvil + + * hsuser.texi (Using History Interactively): Disable !BashFeatures + @defcodeindex. Make the `Programming with GNU History' reference + external. + * inc-hist.texinfo: Remove. + +2011-05-11 Jan Kratochvil + + Imported readline 6.2, and upstream patch 001. + +2006-04-24 Daniel Jacobowitz + + Imported readline 5.1, and upstream patches 001-004. + +2003-09-14 Andrew Cagney + + * history.0: Delete generated file. + +2002-02-24 Elena Zannoni + + * ChangeLog.gdb: Renamed from ChangeLog. + +2002-01-20 Eli Zaretskii + + * rluser.texinfo (Sample Init File): Prevent overfull hboxes. + From Brian Youmans <3diff@gnu.org>. + +2000-07-09 Elena Zannoni + + * Removed generated files rluserman.{dvi, info, html, ps}. + +2000-07-07 Elena Zannoni + + * Import of readline 4.1. + + Regenerated inc-hist.texinfo as copy of hsuser.texinfo, for + inclusion in the gdb manual. + + New file: rluserman.texinfo + +Tue Apr 18 15:43:52 2000 Andrew Cagney + + * readline.0: Delete. Generated by Makefile, deleted by distclean + rule. + +Tue Mar 28 16:06:22 2000 Andrew Cagney + + * inc-hist.texinfo, rluser.texinfo: Revert change Fri Mar 24 + 18:04:32 2000 Andrew Cagney . + Unconditionally provide @chapter and @node. + +Fri Mar 24 18:04:32 2000 Andrew Cagney + + * inc-hist.texinfo: When GDBN omit the chapter/node. + * rluser.texinfo (Command Line Editing): Ditto. + +1999-08-10 Elena Zannoni + + * hsuser.texinfo (Bash History Builtins): Comment out btindex + commands. + + * inc-hist.texinfo: New file. Same as hsuser.texinfo, but w/o + cross reference to GNU History Manual. + +Tue Dec 22 10:07:58 1998 Elena Zannoni + + * hsuser.texinfo (Bash History Builtins): comment out btindex + commands. + + * Import of Readline 2.2.1. + + New files: readline.0, readline.3, texi2dvi, texi2html. + +1998-12-17 Felix Lee + + * inc-hist.texi: @node line "Using History" was wrong. + +Thu Jul 9 17:03:26 1998 Edith Epstein + + * inc-hist.texi: one line change. + +Wed Sep 20 12:57:29 1995 Ian Lance Taylor + + * Makefile.in (maintainer-clean): New synonym for realclean. + +Tue Feb 2 11:40:04 1993 Roland H. Pesch (pesch@fowanton.cygnus.com) + + * Makefile.in: configurable (and useable) Makefile template + * Makefile: removed, replaced with configurable Makefile.in + * texindex.c texinfo.tex: remove, replacing w/refs to tools + elsewhere in distribution tree + * configure.in: pro forma configure stub + * ChangeLog: new file diff --git a/readline/readline/doc/Makefile.in b/readline/readline/doc/Makefile.in new file mode 100644 index 0000000000..a38bc9eb4a --- /dev/null +++ b/readline/readline/doc/Makefile.in @@ -0,0 +1,271 @@ +# This makefile for Readline library documentation is in -*- text -*- mode. +# Emacs likes it that way. + +# Copyright (C) 1996-2009 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +PACKAGE_TARNAME = @PACKAGE_TARNAME@ + +topdir = @top_srcdir@ +srcdir = @srcdir@ +VPATH = @srcdir@ + +prefix = @prefix@ + +datarootdir = @datarootdir@ + +docdir = @docdir@ +infodir = @infodir@ + +mandir = @mandir@ +manpfx = man + +man1ext = .1 +man1dir = $(mandir)/$(manpfx)1 +man3ext = .3 +man3dir = $(mandir)/$(manpfx)3 + +# set this to a value to have the HTML documentation installed +htmldir = + +# Support an alternate destination root directory for package building +DESTDIR = + +SHELL = @MAKE_SHELL@ +RM = rm -f + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ + +BUILD_DIR = @BUILD_DIR@ +TEXINPUTDIR = $(srcdir) + +MAKEINFO = LANGUAGE= makeinfo +TEXI2DVI = $(srcdir)/texi2dvi +TEXI2HTML = $(srcdir)/texi2html +QUIETPS = #set this to -q to shut up dvips +PAPERSIZE = letter +PSDPI = 600 +DVIPS = dvips -D ${PSDPI} $(QUIETPS) -t ${PAPERSIZE} -o $@ # tricky +# experimental; uses external texi2dvi for now; this needs pdftex to be present +TEXI2PDF = texi2dvi --pdf + +# These tools might not be available; they're not required +DVIPDF = dvipdfm -o $@ -p ${PAPERSIZE} +PSPDF = gs -sPAPERSIZE=${PAPERSIZE} -sDEVICE=pdfwrite -dNOPAUSE -dBATCH -sOutputFile=$@ + +RLSRC = $(srcdir)/rlman.texi $(srcdir)/rluser.texi \ + $(srcdir)/rltech.texi $(srcdir)/version.texi \ + $(srcdir)/rluserman.texi $(srcdir)/fdl.texi +HISTSRC = $(srcdir)/history.texi $(srcdir)/hsuser.texi \ + $(srcdir)/hstech.texi $(srcdir)/version.texi $(srcdir)/fdl.texi + +# This should be a program that converts troff to an ascii-readable format +NROFF = groff -Tascii + +# This should be a program that converts troff to postscript +GROFF = groff + +DVIOBJ = readline.dvi history.dvi rluserman.dvi +INFOOBJ = readline.info history.info rluserman.info +PSOBJ = readline.ps history.ps rluserman.ps readline_3.ps history_3.ps +HTMLOBJ = readline.html history.html rluserman.html +TEXTOBJ = readline.0 history.0 +PDFOBJ = readline.pdf history.pdf rluserman.pdf + +INTERMEDIATE_OBJ = rlman.dvi + +DIST_DOCS = $(DVIOBJ) $(PSOBJ) $(HTMLOBJ) $(INFOOBJ) $(TEXTOBJ) $(PDFOBJ) + +.SUFFIXES: .0 .3 .ps .txt .dvi .html .pdf + +.3.0: + $(RM) $@ + -${NROFF} -man $< > $@ + +.ps.pdf: + $(RM) $@ + -${PSPDF} $< + +.dvi.pdf: + $(RM) $@ + -${DVIPDF} $< + +#.texi.pdf: +# $(RM) $@ +# -${TEXI2PDF} $< + +all: info dvi html ps text pdf +nodvi: info html text + +xdist: $(DIST_DOCS) + +info: $(INFOOBJ) +dvi: $(DVIOBJ) +ps: $(PSOBJ) +html: $(HTMLOBJ) +text: $(TEXTOBJ) +pdf: $(PDFOBJ) + +readline.dvi: $(RLSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rlman.texi + mv rlman.dvi readline.dvi + +readline.info: $(RLSRC) + $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rlman.texi + +rluserman.dvi: $(RLSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/rluserman.texi + +rluserman.info: $(RLSRC) + $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/rluserman.texi + +history.dvi: ${HISTSRC} + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2DVI) $(srcdir)/history.texi + +history.info: ${HISTSRC} + $(MAKEINFO) --no-split -I $(TEXINPUTDIR) -o $@ $(srcdir)/history.texi + +readline.ps: readline.dvi + $(RM) $@ + $(DVIPS) readline.dvi + +rluserman.ps: rluserman.dvi + $(RM) $@ + $(DVIPS) rluserman.dvi + +history.ps: history.dvi + $(RM) $@ + $(DVIPS) history.dvi + +# +# This leaves readline.html and rlman.html -- rlman.html is for www.gnu.org +# +readline.html: ${RLSRC} + $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rlman.texi + sed -e 's:rlman.html:readline.html:g' rlman.html > readline.html + $(RM) rlman.html + +rluserman.html: ${RLSRC} + $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/rluserman.texi + +history.html: ${HISTSRC} + $(TEXI2HTML) -menu -monolithic -I $(TEXINPUTDIR) $(srcdir)/history.texi + +readline.0: readline.3 + +readline_3.ps: $(srcdir)/readline.3 + ${RM} $@ + ${GROFF} -man < $(srcdir)/readline.3 > $@ + +history.0: history.3 + +history_3.ps: $(srcdir)/history.3 + ${RM} $@ + ${GROFF} -man < $(srcdir)/history.3 > $@ + +readline.pdf: $(RLSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/rlman.texi + mv rlman.pdf $@ + +history.pdf: $(HISTSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/history.texi + +rluserman.pdf: $(RLSRC) + TEXINPUTS=.:$(TEXINPUTDIR):$$TEXINPUTS $(TEXI2PDF) $(srcdir)/rluserman.texi + +clean: + $(RM) *.aux *.bak *.cp *.fn *.ky *.log *.pg *.toc *.tp *.vr *.cps \ + *.pgs *.bt *.bts *.rw *.rws *.fns *.kys *.tps *.vrs *.o \ + core *.core + +mostlyclean: clean + +distclean: clean maybe-clean + $(RM) $(INTERMEDIATE_OBJ) + $(RM) Makefile + +maybe-clean: + -if test "X$(topdir)" != "X.." && test "X$(topdir)" != "X$(BUILD_DIR)"; then \ + $(RM) $(DIST_DOCS); \ + fi + +maintainer-clean: clean + $(RM) $(DIST_DOCS) + $(RM) $(INTERMEDIATE_OBJ) + $(RM) $(PDFOBJ) + $(RM) Makefile + +installdirs: $(topdir)/support/mkdirs + -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(infodir) $(DESTDIR)$(man3dir) + -if test -n "${htmldir}" ; then \ + $(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(htmldir) ; \ + fi + +install: installdirs + if test -f readline.info; then \ + ${INSTALL_DATA} readline.info $(DESTDIR)$(infodir)/readline.info; \ + else \ + ${INSTALL_DATA} $(srcdir)/readline.info $(DESTDIR)$(infodir)/readline.info; \ + fi + if test -f rluserman.info; then \ + ${INSTALL_DATA} rluserman.info $(DESTDIR)$(infodir)/rluserman.info; \ + else \ + ${INSTALL_DATA} $(srcdir)/rluserman.info $(DESTDIR)$(infodir)/rluserman.info; \ + fi + if test -f history.info; then \ + ${INSTALL_DATA} history.info $(DESTDIR)$(infodir)/history.info; \ + else \ + ${INSTALL_DATA} $(srcdir)/history.info $(DESTDIR)$(infodir)/history.info; \ + fi + -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --dir-file=$(DESTDIR)$(infodir)/dir \ + $(DESTDIR)$(infodir)/readline.info ; \ + install-info --dir-file=$(DESTDIR)$(infodir)/dir \ + $(DESTDIR)$(infodir)/history.info ; \ + install-info --dir-file=$(DESTDIR)$(infodir)/dir \ + $(DESTDIR)$(infodir)/rluserman.info ; \ + else true; fi + -${INSTALL_DATA} $(srcdir)/readline.3 $(DESTDIR)$(man3dir)/readline$(man3ext) + -${INSTALL_DATA} $(srcdir)/history.3 $(DESTDIR)$(man3dir)/history$(man3ext) + -if test -n "${htmldir}" ; then \ + if test -f readline.html; then \ + ${INSTALL_DATA} readline.html $(DESTDIR)$(htmldir)/readline.html; \ + else \ + ${INSTALL_DATA} $(srcdir)/readline.html $(DESTDIR)$(htmldir)/readline.html; \ + fi ; \ + if test -f history.html; then \ + ${INSTALL_DATA} history.html $(DESTDIR)$(htmldir)/history.html; \ + else \ + ${INSTALL_DATA} $(srcdir)/history.html $(DESTDIR)$(htmldir)/history.html; \ + fi ; \ + if test -f rluserman.html; then \ + ${INSTALL_DATA} rluserman.html $(DESTDIR)$(htmldir)/rluserman.html; \ + else \ + ${INSTALL_DATA} $(srcdir)/rluserman.html $(DESTDIR)$(htmldir)/rluserman.html; \ + fi ; \ + fi + +uninstall: + $(RM) $(DESTDIR)$(infodir)/readline.info + $(RM) $(DESTDIR)$(infodir)/rluserman.info + $(RM) $(DESTDIR)$(infodir)/history.info + $(RM) $(DESTDIR)$(man3dir)/readline$(man3ext) + $(RM) $(DESTDIR)$(man3dir)/history$(man3ext) + -if test -n "${htmldir}" ; then \ + $(RM) $(DESTDIR)$(htmldir)/readline.html ; \ + $(RM) $(DESTDIR)$(htmldir)/rluserman.html ; \ + $(RM) $(DESTDIR)$(htmldir)/history.html ; \ + fi diff --git a/readline/readline/doc/fdl.texi b/readline/readline/doc/fdl.texi new file mode 100644 index 0000000000..8805f1a47d --- /dev/null +++ b/readline/readline/doc/fdl.texi @@ -0,0 +1,506 @@ +@c The GNU Free Documentation License. +@center Version 1.3, 3 November 2008 + +@c This file is intended to be included within another document, +@c hence no sectioning command or @node. + +@display +Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc. +@uref{http://fsf.org/} + +Everyone is permitted to copy and distribute verbatim copies +of this license document, but changing it is not allowed. +@end display + +@enumerate 0 +@item +PREAMBLE + +The purpose of this License is to make a manual, textbook, or other +functional and useful document @dfn{free} in the sense of freedom: to +assure everyone the effective freedom to copy and redistribute it, +with or without modifying it, either commercially or noncommercially. +Secondarily, this License preserves for the author and publisher a way +to get credit for their work, while not being considered responsible +for modifications made by others. + +This License is a kind of ``copyleft'', which means that derivative +works of the document must themselves be free in the same sense. It +complements the GNU General Public License, which is a copyleft +license designed for free software. + +We have designed this License in order to use it for manuals for free +software, because free software needs free documentation: a free +program should come with manuals providing the same freedoms that the +software does. But this License is not limited to software manuals; +it can be used for any textual work, regardless of subject matter or +whether it is published as a printed book. We recommend this License +principally for works whose purpose is instruction or reference. + +@item +APPLICABILITY AND DEFINITIONS + +This License applies to any manual or other work, in any medium, that +contains a notice placed by the copyright holder saying it can be +distributed under the terms of this License. Such a notice grants a +world-wide, royalty-free license, unlimited in duration, to use that +work under the conditions stated herein. The ``Document'', below, +refers to any such manual or work. Any member of the public is a +licensee, and is addressed as ``you''. You accept the license if you +copy, modify or distribute the work in a way requiring permission +under copyright law. + +A ``Modified Version'' of the Document means any work containing the +Document or a portion of it, either copied verbatim, or with +modifications and/or translated into another language. + +A ``Secondary Section'' is a named appendix or a front-matter section +of the Document that deals exclusively with the relationship of the +publishers or authors of the Document to the Document's overall +subject (or to related matters) and contains nothing that could fall +directly within that overall subject. (Thus, if the Document is in +part a textbook of mathematics, a Secondary Section may not explain +any mathematics.) The relationship could be a matter of historical +connection with the subject or with related matters, or of legal, +commercial, philosophical, ethical or political position regarding +them. + +The ``Invariant Sections'' are certain Secondary Sections whose titles +are designated, as being those of Invariant Sections, in the notice +that says that the Document is released under this License. If a +section does not fit the above definition of Secondary then it is not +allowed to be designated as Invariant. The Document may contain zero +Invariant Sections. If the Document does not identify any Invariant +Sections then there are none. + +The ``Cover Texts'' are certain short passages of text that are listed, +as Front-Cover Texts or Back-Cover Texts, in the notice that says that +the Document is released under this License. A Front-Cover Text may +be at most 5 words, and a Back-Cover Text may be at most 25 words. + +A ``Transparent'' copy of the Document means a machine-readable copy, +represented in a format whose specification is available to the +general public, that is suitable for revising the document +straightforwardly with generic text editors or (for images composed of +pixels) generic paint programs or (for drawings) some widely available +drawing editor, and that is suitable for input to text formatters or +for automatic translation to a variety of formats suitable for input +to text formatters. A copy made in an otherwise Transparent file +format whose markup, or absence of markup, has been arranged to thwart +or discourage subsequent modification by readers is not Transparent. +An image format is not Transparent if used for any substantial amount +of text. A copy that is not ``Transparent'' is called ``Opaque''. + +Examples of suitable formats for Transparent copies include plain +@sc{ascii} without markup, Texinfo input format, La@TeX{} input +format, @acronym{SGML} or @acronym{XML} using a publicly available +@acronym{DTD}, and standard-conforming simple @acronym{HTML}, +PostScript or @acronym{PDF} designed for human modification. Examples +of transparent image formats include @acronym{PNG}, @acronym{XCF} and +@acronym{JPG}. Opaque formats include proprietary formats that can be +read and edited only by proprietary word processors, @acronym{SGML} or +@acronym{XML} for which the @acronym{DTD} and/or processing tools are +not generally available, and the machine-generated @acronym{HTML}, +PostScript or @acronym{PDF} produced by some word processors for +output purposes only. + +The ``Title Page'' means, for a printed book, the title page itself, +plus such following pages as are needed to hold, legibly, the material +this License requires to appear in the title page. For works in +formats which do not have any title page as such, ``Title Page'' means +the text near the most prominent appearance of the work's title, +preceding the beginning of the body of the text. + +The ``publisher'' means any person or entity that distributes copies +of the Document to the public. + +A section ``Entitled XYZ'' means a named subunit of the Document whose +title either is precisely XYZ or contains XYZ in parentheses following +text that translates XYZ in another language. (Here XYZ stands for a +specific section name mentioned below, such as ``Acknowledgements'', +``Dedications'', ``Endorsements'', or ``History''.) To ``Preserve the Title'' +of such a section when you modify the Document means that it remains a +section ``Entitled XYZ'' according to this definition. + +The Document may include Warranty Disclaimers next to the notice which +states that this License applies to the Document. These Warranty +Disclaimers are considered to be included by reference in this +License, but only as regards disclaiming warranties: any other +implication that these Warranty Disclaimers may have is void and has +no effect on the meaning of this License. + +@item +VERBATIM COPYING + +You may copy and distribute the Document in any medium, either +commercially or noncommercially, provided that this License, the +copyright notices, and the license notice saying this License applies +to the Document are reproduced in all copies, and that you add no other +conditions whatsoever to those of this License. You may not use +technical measures to obstruct or control the reading or further +copying of the copies you make or distribute. However, you may accept +compensation in exchange for copies. If you distribute a large enough +number of copies you must also follow the conditions in section 3. + +You may also lend copies, under the same conditions stated above, and +you may publicly display copies. + +@item +COPYING IN QUANTITY + +If you publish printed copies (or copies in media that commonly have +printed covers) of the Document, numbering more than 100, and the +Document's license notice requires Cover Texts, you must enclose the +copies in covers that carry, clearly and legibly, all these Cover +Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on +the back cover. Both covers must also clearly and legibly identify +you as the publisher of these copies. The front cover must present +the full title with all words of the title equally prominent and +visible. You may add other material on the covers in addition. +Copying with changes limited to the covers, as long as they preserve +the title of the Document and satisfy these conditions, can be treated +as verbatim copying in other respects. + +If the required texts for either cover are too voluminous to fit +legibly, you should put the first ones listed (as many as fit +reasonably) on the actual cover, and continue the rest onto adjacent +pages. + +If you publish or distribute Opaque copies of the Document numbering +more than 100, you must either include a machine-readable Transparent +copy along with each Opaque copy, or state in or with each Opaque copy +a computer-network location from which the general network-using +public has access to download using public-standard network protocols +a complete Transparent copy of the Document, free of added material. +If you use the latter option, you must take reasonably prudent steps, +when you begin distribution of Opaque copies in quantity, to ensure +that this Transparent copy will remain thus accessible at the stated +location until at least one year after the last time you distribute an +Opaque copy (directly or through your agents or retailers) of that +edition to the public. + +It is requested, but not required, that you contact the authors of the +Document well before redistributing any large number of copies, to give +them a chance to provide you with an updated version of the Document. + +@item +MODIFICATIONS + +You may copy and distribute a Modified Version of the Document under +the conditions of sections 2 and 3 above, provided that you release +the Modified Version under precisely this License, with the Modified +Version filling the role of the Document, thus licensing distribution +and modification of the Modified Version to whoever possesses a copy +of it. In addition, you must do these things in the Modified Version: + +@enumerate A +@item +Use in the Title Page (and on the covers, if any) a title distinct +from that of the Document, and from those of previous versions +(which should, if there were any, be listed in the History section +of the Document). You may use the same title as a previous version +if the original publisher of that version gives permission. + +@item +List on the Title Page, as authors, one or more persons or entities +responsible for authorship of the modifications in the Modified +Version, together with at least five of the principal authors of the +Document (all of its principal authors, if it has fewer than five), +unless they release you from this requirement. + +@item +State on the Title page the name of the publisher of the +Modified Version, as the publisher. + +@item +Preserve all the copyright notices of the Document. + +@item +Add an appropriate copyright notice for your modifications +adjacent to the other copyright notices. + +@item +Include, immediately after the copyright notices, a license notice +giving the public permission to use the Modified Version under the +terms of this License, in the form shown in the Addendum below. + +@item +Preserve in that license notice the full lists of Invariant Sections +and required Cover Texts given in the Document's license notice. + +@item +Include an unaltered copy of this License. + +@item +Preserve the section Entitled ``History'', Preserve its Title, and add +to it an item stating at least the title, year, new authors, and +publisher of the Modified Version as given on the Title Page. If +there is no section Entitled ``History'' in the Document, create one +stating the title, year, authors, and publisher of the Document as +given on its Title Page, then add an item describing the Modified +Version as stated in the previous sentence. + +@item +Preserve the network location, if any, given in the Document for +public access to a Transparent copy of the Document, and likewise +the network locations given in the Document for previous versions +it was based on. These may be placed in the ``History'' section. +You may omit a network location for a work that was published at +least four years before the Document itself, or if the original +publisher of the version it refers to gives permission. + +@item +For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve +the Title of the section, and preserve in the section all the +substance and tone of each of the contributor acknowledgements and/or +dedications given therein. + +@item +Preserve all the Invariant Sections of the Document, +unaltered in their text and in their titles. Section numbers +or the equivalent are not considered part of the section titles. + +@item +Delete any section Entitled ``Endorsements''. Such a section +may not be included in the Modified Version. + +@item +Do not retitle any existing section to be Entitled ``Endorsements'' or +to conflict in title with any Invariant Section. + +@item +Preserve any Warranty Disclaimers. +@end enumerate + +If the Modified Version includes new front-matter sections or +appendices that qualify as Secondary Sections and contain no material +copied from the Document, you may at your option designate some or all +of these sections as invariant. To do this, add their titles to the +list of Invariant Sections in the Modified Version's license notice. +These titles must be distinct from any other section titles. + +You may add a section Entitled ``Endorsements'', provided it contains +nothing but endorsements of your Modified Version by various +parties---for example, statements of peer review or that the text has +been approved by an organization as the authoritative definition of a +standard. + +You may add a passage of up to five words as a Front-Cover Text, and a +passage of up to 25 words as a Back-Cover Text, to the end of the list +of Cover Texts in the Modified Version. Only one passage of +Front-Cover Text and one of Back-Cover Text may be added by (or +through arrangements made by) any one entity. If the Document already +includes a cover text for the same cover, previously added by you or +by arrangement made by the same entity you are acting on behalf of, +you may not add another; but you may replace the old one, on explicit +permission from the previous publisher that added the old one. + +The author(s) and publisher(s) of the Document do not by this License +give permission to use their names for publicity for or to assert or +imply endorsement of any Modified Version. + +@item +COMBINING DOCUMENTS + +You may combine the Document with other documents released under this +License, under the terms defined in section 4 above for modified +versions, provided that you include in the combination all of the +Invariant Sections of all of the original documents, unmodified, and +list them all as Invariant Sections of your combined work in its +license notice, and that you preserve all their Warranty Disclaimers. + +The combined work need only contain one copy of this License, and +multiple identical Invariant Sections may be replaced with a single +copy. If there are multiple Invariant Sections with the same name but +different contents, make the title of each such section unique by +adding at the end of it, in parentheses, the name of the original +author or publisher of that section if known, or else a unique number. +Make the same adjustment to the section titles in the list of +Invariant Sections in the license notice of the combined work. + +In the combination, you must combine any sections Entitled ``History'' +in the various original documents, forming one section Entitled +``History''; likewise combine any sections Entitled ``Acknowledgements'', +and any sections Entitled ``Dedications''. You must delete all +sections Entitled ``Endorsements.'' + +@item +COLLECTIONS OF DOCUMENTS + +You may make a collection consisting of the Document and other documents +released under this License, and replace the individual copies of this +License in the various documents with a single copy that is included in +the collection, provided that you follow the rules of this License for +verbatim copying of each of the documents in all other respects. + +You may extract a single document from such a collection, and distribute +it individually under this License, provided you insert a copy of this +License into the extracted document, and follow this License in all +other respects regarding verbatim copying of that document. + +@item +AGGREGATION WITH INDEPENDENT WORKS + +A compilation of the Document or its derivatives with other separate +and independent documents or works, in or on a volume of a storage or +distribution medium, is called an ``aggregate'' if the copyright +resulting from the compilation is not used to limit the legal rights +of the compilation's users beyond what the individual works permit. +When the Document is included in an aggregate, this License does not +apply to the other works in the aggregate which are not themselves +derivative works of the Document. + +If the Cover Text requirement of section 3 is applicable to these +copies of the Document, then if the Document is less than one half of +the entire aggregate, the Document's Cover Texts may be placed on +covers that bracket the Document within the aggregate, or the +electronic equivalent of covers if the Document is in electronic form. +Otherwise they must appear on printed covers that bracket the whole +aggregate. + +@item +TRANSLATION + +Translation is considered a kind of modification, so you may +distribute translations of the Document under the terms of section 4. +Replacing Invariant Sections with translations requires special +permission from their copyright holders, but you may include +translations of some or all Invariant Sections in addition to the +original versions of these Invariant Sections. You may include a +translation of this License, and all the license notices in the +Document, and any Warranty Disclaimers, provided that you also include +the original English version of this License and the original versions +of those notices and disclaimers. In case of a disagreement between +the translation and the original version of this License or a notice +or disclaimer, the original version will prevail. + +If a section in the Document is Entitled ``Acknowledgements'', +``Dedications'', or ``History'', the requirement (section 4) to Preserve +its Title (section 1) will typically require changing the actual +title. + +@item +TERMINATION + +You may not copy, modify, sublicense, or distribute the Document +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense, or distribute it is void, and +will automatically terminate your rights under this License. + +However, if you cease all violation of this License, then your license +from a particular copyright holder is reinstated (a) provisionally, +unless and until the copyright holder explicitly and finally +terminates your license, and (b) permanently, if the copyright holder +fails to notify you of the violation by some reasonable means prior to +60 days after the cessation. + +Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + +Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, receipt of a copy of some or all of the same material does +not give you any rights to use it. + +@item +FUTURE REVISIONS OF THIS LICENSE + +The Free Software Foundation may publish new, revised versions +of the GNU Free Documentation License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. See +@uref{http://www.gnu.org/copyleft/}. + +Each version of the License is given a distinguishing version number. +If the Document specifies that a particular numbered version of this +License ``or any later version'' applies to it, you have the option of +following the terms and conditions either of that specified version or +of any later version that has been published (not as a draft) by the +Free Software Foundation. If the Document does not specify a version +number of this License, you may choose any version ever published (not +as a draft) by the Free Software Foundation. If the Document +specifies that a proxy can decide which future versions of this +License can be used, that proxy's public statement of acceptance of a +version permanently authorizes you to choose that version for the +Document. + +@item +RELICENSING + +``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any +World Wide Web server that publishes copyrightable works and also +provides prominent facilities for anybody to edit those works. A +public wiki that anybody can edit is an example of such a server. A +``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the +site means any set of copyrightable works thus published on the MMC +site. + +``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0 +license published by Creative Commons Corporation, a not-for-profit +corporation with a principal place of business in San Francisco, +California, as well as future copyleft versions of that license +published by that same organization. + +``Incorporate'' means to publish or republish a Document, in whole or +in part, as part of another Document. + +An MMC is ``eligible for relicensing'' if it is licensed under this +License, and if all works that were first published under this License +somewhere other than this MMC, and subsequently incorporated in whole +or in part into the MMC, (1) had no cover texts or invariant sections, +and (2) were thus incorporated prior to November 1, 2008. + +The operator of an MMC Site may republish an MMC contained in the site +under CC-BY-SA on the same site at any time before August 1, 2009, +provided the MMC is eligible for relicensing. + +@end enumerate + +@page +@heading ADDENDUM: How to use this License for your documents + +To use this License in a document you have written, include a copy of +the License in the document and put the following copyright and +license notices just after the title page: + +@smallexample +@group + Copyright (C) @var{year} @var{your name}. + Permission is granted to copy, distribute and/or modify this document + under the terms of the GNU Free Documentation License, Version 1.3 + or any later version published by the Free Software Foundation; + with no Invariant Sections, no Front-Cover Texts, and no Back-Cover + Texts. A copy of the license is included in the section entitled ``GNU + Free Documentation License''. +@end group +@end smallexample + +If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, +replace the ``with@dots{}Texts.'' line with this: + +@smallexample +@group + with the Invariant Sections being @var{list their titles}, with + the Front-Cover Texts being @var{list}, and with the Back-Cover Texts + being @var{list}. +@end group +@end smallexample + +If you have Invariant Sections without Cover Texts, or some other +combination of the three, merge those two alternatives to suit the +situation. + +If your document contains nontrivial examples of program code, we +recommend releasing these examples in parallel under your choice of +free software license, such as the GNU General Public License, +to permit their use in free software. + +@c Local Variables: +@c ispell-local-pdict: "ispell-dict" +@c End: + diff --git a/readline/readline/doc/history.3 b/readline/readline/doc/history.3 new file mode 100644 index 0000000000..8de64f63cb --- /dev/null +++ b/readline/readline/doc/history.3 @@ -0,0 +1,680 @@ +.\" +.\" MAN PAGE COMMENTS to +.\" +.\" Chet Ramey +.\" Information Network Services +.\" Case Western Reserve University +.\" chet.ramey@case.edu +.\" +.\" Last Change: Sun Oct 8 11:43:43 EDT 2017 +.\" +.TH HISTORY 3 "2017 October 8" "GNU History 6.3" +.\" +.\" File Name macro. This used to be `.PN', for Path Name, +.\" but Sun doesn't seem to like that very much. +.\" +.de FN +\fI\|\\$1\|\fP +.. +.ds lp \fR\|(\fP +.ds rp \fR\|)\fP +.\" FnN return-value fun-name N arguments +.de Fn1 +\fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3\fP\\*(rp +.br +.. +.de Fn2 +.if t \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3,\|\\$4\fP\\*(rp +.if n \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3, \\$4\fP\\*(rp +.br +.. +.de Fn3 +.if t \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3,\|\\$4,\|\\$5\fP\|\\*(rp +.if n \fI\\$1\fP \fB\\$2\fP \\*(lp\fI\\$3, \\$4, \\$5\fP\\*(rp +.br +.. +.de Vb +\fI\\$1\fP \fB\\$2\fP +.br +.. +.SH NAME +history \- GNU History Library +.SH COPYRIGHT +.if t The GNU History Library is Copyright \(co 1989-2017 by the Free Software Foundation, Inc. +.if n The GNU History Library is Copyright (C) 1989-2017 by the Free Software Foundation, Inc. +.SH DESCRIPTION +Many programs read input from the user a line at a time. The GNU +History library is able to keep track of those lines, associate arbitrary +data with each line, and utilize information from previous lines in +composing new ones. +.PP +.SH "HISTORY EXPANSION" +.PP +The history library supports a history expansion feature that +is identical to the history expansion in +.BR bash. +This section describes what syntax features are available. +.PP +History expansions introduce words from the history list into +the input stream, making it easy to repeat commands, insert the +arguments to a previous command into the current input line, or +fix errors in previous commands quickly. +.PP +History expansion is usually performed immediately after a complete line +is read. +It takes place in two parts. +The first is to determine which line from the history list +to use during substitution. +The second is to select portions of that line for inclusion into +the current one. +The line selected from the history is the \fIevent\fP, +and the portions of that line that are acted upon are \fIwords\fP. +Various \fImodifiers\fP are available to manipulate the selected words. +The line is broken into words in the same fashion as \fBbash\fP +does when reading input, +so that several words that would otherwise be separated +are considered one word when surrounded by quotes (see the +description of \fBhistory_tokenize()\fP below). +History expansions are introduced by the appearance of the +history expansion character, which is \^\fB!\fP\^ by default. +Only backslash (\^\fB\e\fP\^) and single quotes can quote +the history expansion character. +.SS Event Designators +.PP +An event designator is a reference to a command line entry in the +history list. +Unless the reference is absolute, events are relative to the current +position in the history list. +.PP +.PD 0 +.TP +.B ! +Start a history substitution, except when followed by a +.BR blank , +newline, = or (. +.TP +.B !\fIn\fR +Refer to command line +.IR n . +.TP +.B !\-\fIn\fR +Refer to the current command minus +.IR n . +.TP +.B !! +Refer to the previous command. This is a synonym for `!\-1'. +.TP +.B !\fIstring\fR +Refer to the most recent command +preceding the current position in the history list +starting with +.IR string . +.TP +.B !?\fIstring\fR\fB[?]\fR +Refer to the most recent command +preceding the current position in the history list +containing +.IR string . +The trailing \fB?\fP may be omitted if +.I string +is followed immediately by a newline. +.TP +.B \d\s+2^\s-2\u\fIstring1\fP\d\s+2^\s-2\u\fIstring2\fP\d\s+2^\s-2\u +Quick substitution. Repeat the last command, replacing +.I string1 +with +.IR string2 . +Equivalent to +``!!:s/\fIstring1\fP/\fIstring2\fP/'' +(see \fBModifiers\fP below). +.TP +.B !# +The entire command line typed so far. +.PD +.SS Word Designators +.PP +Word designators are used to select desired words from the event. +A +.B : +separates the event specification from the word designator. +It may be omitted if the word designator begins with a +.BR ^ , +.BR $ , +.BR * , +.BR \- , +or +.BR % . +Words are numbered from the beginning of the line, +with the first word being denoted by 0 (zero). +Words are inserted into the current line separated by single spaces. +.PP +.PD 0 +.TP +.B 0 (zero) +The zeroth word. For the shell, this is the command +word. +.TP +.I n +The \fIn\fRth word. +.TP +.B ^ +The first argument. That is, word 1. +.TP +.B $ +The last word. This is usually the last argument, but will expand to the +zeroth word if there is only one word in the line. +.TP +.B % +The word matched by the most recent `?\fIstring\fR?' search. +.TP +.I x\fB\-\fPy +A range of words; `\-\fIy\fR' abbreviates `0\-\fIy\fR'. +.TP +.B * +All of the words but the zeroth. This is a synonym +for `\fI1\-$\fP'. It is not an error to use +.B * +if there is just one +word in the event; the empty string is returned in that case. +.TP +.B x* +Abbreviates \fIx\-$\fP. +.TP +.B x\- +Abbreviates \fIx\-$\fP like \fBx*\fP, but omits the last word. +.PD +.PP +If a word designator is supplied without an event specification, the +previous command is used as the event. +.SS Modifiers +.PP +After the optional word designator, there may appear a sequence of +one or more of the following modifiers, each preceded by a `:'. +.PP +.PD 0 +.PP +.TP +.B h +Remove a trailing file name component, leaving only the head. +.TP +.B t +Remove all leading file name components, leaving the tail. +.TP +.B r +Remove a trailing suffix of the form \fI.xxx\fP, leaving the +basename. +.TP +.B e +Remove all but the trailing suffix. +.TP +.B p +Print the new command but do not execute it. +.TP +.B q +Quote the substituted words, escaping further substitutions. +.TP +.B x +Quote the substituted words as with +.BR q , +but break into words at +.B blanks +and newlines. +.TP +.B s/\fIold\fP/\fInew\fP/ +Substitute +.I new +for the first occurrence of +.I old +in the event line. Any delimiter can be used in place of /. The +final delimiter is optional if it is the last character of the +event line. The delimiter may be quoted in +.I old +and +.I new +with a single backslash. If & appears in +.IR new , +it is replaced by +.IR old . +A single backslash will quote the &. If +.I old +is null, it is set to the last +.I old +substituted, or, if no previous history substitutions took place, +the last +.I string +in a +.B !?\fIstring\fR\fB[?]\fR +search. +.TP +.B & +Repeat the previous substitution. +.TP +.B g +Cause changes to be applied over the entire event line. This is +used in conjunction with `\fB:s\fP' (e.g., `\fB:gs/\fIold\fP/\fInew\fP/\fR') +or `\fB:&\fP'. If used with +`\fB:s\fP', any delimiter can be used +in place of /, and the final delimiter is optional +if it is the last character of the event line. +An \fBa\fP may be used as a synonym for \fBg\fP. +.TP +.B G +Apply the following `\fBs\fP' modifier once to each word in the event line. +.PD +.SH "PROGRAMMING WITH HISTORY FUNCTIONS" +This section describes how to use the History library in other programs. +.SS Introduction to History +.PP +The programmer using the History library has available functions +for remembering lines on a history list, associating arbitrary data +with a line, removing lines from the list, searching through the list +for a line containing an arbitrary text string, and referencing any line +in the list directly. In addition, a history \fIexpansion\fP function +is available which provides for a consistent user interface across +different programs. +.PP +The user using programs written with the History library has the +benefit of a consistent user interface with a set of well-known +commands for manipulating the text of previous lines and using that text +in new commands. The basic history manipulation commands are +identical to +the history substitution provided by \fBbash\fP. +.PP +If the programmer desires, he can use the Readline library, which +includes some history manipulation by default, and has the added +advantage of command line editing. +.PP +Before declaring any functions using any functionality the History +library provides in other code, an application writer should include +the file +.FN +in any file that uses the +History library's features. It supplies extern declarations for all +of the library's public functions and variables, and declares all of +the public data structures. + +.SS History Storage +.PP +The history list is an array of history entries. A history entry is +declared as follows: +.PP +.Vb "typedef void *" histdata_t; +.PP +.nf +typedef struct _hist_entry { + char *line; + char *timestamp; + histdata_t data; +} HIST_ENTRY; +.fi +.PP +The history list itself might therefore be declared as +.PP +.Vb "HIST_ENTRY **" the_history_list; +.PP +The state of the History library is encapsulated into a single structure: +.PP +.nf +/* + * A structure used to pass around the current state of the history. + */ +typedef struct _hist_state { + HIST_ENTRY **entries; /* Pointer to the entries themselves. */ + int offset; /* The location pointer within this array. */ + int length; /* Number of elements within this array. */ + int size; /* Number of slots allocated to this array. */ + int flags; +} HISTORY_STATE; +.fi +.PP +If the flags member includes \fBHS_STIFLED\fP, the history has been +stifled. +.SH "History Functions" +.PP +This section describes the calling sequence for the various functions +exported by the GNU History library. +.SS Initializing History and State Management +This section describes functions used to initialize and manage +the state of the History library when you want to use the history +functions in your program. + +.Fn1 void using_history void +Begin a session in which the history functions might be used. This +initializes the interactive variables. + +.Fn1 "HISTORY_STATE *" history_get_history_state void +Return a structure describing the current state of the input history. + +.Fn1 void history_set_history_state "HISTORY_STATE *state" +Set the state of the history list according to \fIstate\fP. + +.SS History List Management + +These functions manage individual entries on the history list, or set +parameters managing the list itself. + +.Fn1 void add_history "const char *string" +Place \fIstring\fP at the end of the history list. The associated data +field (if any) is set to \fBNULL\fP. +If the maximum number of history entries has been set using +\fBstifle_history()\fP, and the new number of history entries would exceed +that maximum, the oldest history entry is removed. + +.Fn1 void add_history_time "const char *string" +Change the time stamp associated with the most recent history entry to +\fIstring\fP. + +.Fn1 "HIST_ENTRY *" remove_history "int which" +Remove history entry at offset \fIwhich\fP from the history. The +removed element is returned so you can free the line, data, +and containing structure. + +.Fn1 "histdata_t" free_history_entry "HIST_ENTRY *histent" +Free the history entry \fIhistent\fP and any history library private +data associated with it. Returns the application-specific data +so the caller can dispose of it. + +.Fn3 "HIST_ENTRY *" replace_history_entry "int which" "const char *line" "histdata_t data" +Make the history entry at offset \fIwhich\fP have \fIline\fP and \fIdata\fP. +This returns the old entry so the caller can dispose of any +application-specific data. In the case +of an invalid \fIwhich\fP, a \fBNULL\fP pointer is returned. + +.Fn1 void clear_history "void" +Clear the history list by deleting all the entries. + +.Fn1 void stifle_history "int max" +Stifle the history list, remembering only the last \fImax\fP entries. +The history list will contain only \fImax\fP entries at a time. + +.Fn1 int unstifle_history "void" +Stop stifling the history. This returns the previously-set +maximum number of history entries (as set by \fBstifle_history()\fP). +history was stifled. The value is positive if the history was +stifled, negative if it wasn't. + +.Fn1 int history_is_stifled "void" +Returns non-zero if the history is stifled, zero if it is not. + +.SS Information About the History List + +These functions return information about the entire history list or +individual list entries. + +.Fn1 "HIST_ENTRY **" history_list "void" +Return a \fBNULL\fP terminated array of \fIHIST_ENTRY *\fP which is the +current input history. Element 0 of this list is the beginning of time. +If there is no history, return \fBNULL\fP. + +.Fn1 int where_history "void" +Returns the offset of the current history element. + +.Fn1 "HIST_ENTRY *" current_history "void" +Return the history entry at the current position, as determined by +\fBwhere_history()\fP. If there is no entry there, return a \fBNULL\fP +pointer. + +.Fn1 "HIST_ENTRY *" history_get "int offset" +Return the history entry at position \fIoffset\fP. +The range of valid values of \fIoffset\fP starts at \fBhistory_base\fP +and ends at \fBhistory_length\fP \- 1. +If there is no entry there, or if \fIoffset\fP is outside the valid +range, return a \fBNULL\fP pointer. + +.Fn1 "time_t" history_get_time "HIST_ENTRY *" +Return the time stamp associated with the history entry passed as the argument. + +.Fn1 int history_total_bytes "void" +Return the number of bytes that the primary history entries are using. +This function returns the sum of the lengths of all the lines in the +history. + +.SS Moving Around the History List + +These functions allow the current index into the history list to be +set or changed. + +.Fn1 int history_set_pos "int pos" +Set the current history offset to \fIpos\fP, an absolute index +into the list. +Returns 1 on success, 0 if \fIpos\fP is less than zero or greater +than the number of history entries. + +.Fn1 "HIST_ENTRY *" previous_history "void" +Back up the current history offset to the previous history entry, and +return a pointer to that entry. If there is no previous entry, return +a \fBNULL\fP pointer. + +.Fn1 "HIST_ENTRY *" next_history "void" +If the current history offset refers to a valid history entry, +increment the current history offset. +If the possibly-incremented history offset refers to a valid history +entry, return a pointer to that entry; +otherwise, return a \fBNULL\fP pointer. + +.SS Searching the History List + +These functions allow searching of the history list for entries containing +a specific string. Searching may be performed both forward and backward +from the current history position. The search may be \fIanchored\fP, +meaning that the string must match at the beginning of the history entry. + +.Fn2 int history_search "const char *string" "int direction" +Search the history for \fIstring\fP, starting at the current history offset. +If \fIdirection\fP is less than 0, then the search is through +previous entries, otherwise through subsequent entries. +If \fIstring\fP is found, then +the current history index is set to that history entry, and the value +returned is the offset in the line of the entry where +\fIstring\fP was found. Otherwise, nothing is changed, and a -1 is +returned. + +.Fn2 int history_search_prefix "const char *string" "int direction" +Search the history for \fIstring\fP, starting at the current history +offset. The search is anchored: matching lines must begin with +\fIstring\fP. If \fIdirection\fP is less than 0, then the search is +through previous entries, otherwise through subsequent entries. +If \fIstring\fP is found, then the +current history index is set to that entry, and the return value is 0. +Otherwise, nothing is changed, and a -1 is returned. + +.Fn3 int history_search_pos "const char *string" "int direction" "int pos" +Search for \fIstring\fP in the history list, starting at \fIpos\fP, an +absolute index into the list. If \fIdirection\fP is negative, the search +proceeds backward from \fIpos\fP, otherwise forward. Returns the absolute +index of the history element where \fIstring\fP was found, or -1 otherwise. + +.SS Managing the History File +The History library can read the history from and write it to a file. +This section documents the functions for managing a history file. + +.Fn1 int read_history "const char *filename" +Add the contents of \fIfilename\fP to the history list, a line at a time. +If \fIfilename\fP is \fBNULL\fP, then read from \fI~/.history\fP. +Returns 0 if successful, or \fBerrno\fP if not. + +.Fn3 int read_history_range "const char *filename" "int from" "int to" +Read a range of lines from \fIfilename\fP, adding them to the history list. +Start reading at line \fIfrom\fP and end at \fIto\fP. +If \fIfrom\fP is zero, start at the beginning. If \fIto\fP is less than +\fIfrom\fP, then read until the end of the file. If \fIfilename\fP is +\fBNULL\fP, then read from \fI~/.history\fP. Returns 0 if successful, +or \fBerrno\fP if not. + +.Fn1 int write_history "const char *filename" +Write the current history to \fIfilename\fP, overwriting \fIfilename\fP +if necessary. +If \fIfilename\fP is \fBNULL\fP, then write the history list to \fI~/.history\fP. +Returns 0 on success, or \fBerrno\fP on a read or write error. + + +.Fn2 int append_history "int nelements" "const char *filename" +Append the last \fInelements\fP of the history list to \fIfilename\fP. +If \fIfilename\fP is \fBNULL\fP, then append to \fI~/.history\fP. +Returns 0 on success, or \fBerrno\fP on a read or write error. + +.Fn2 int history_truncate_file "const char *filename" "int nlines" +Truncate the history file \fIfilename\fP, leaving only the last +\fInlines\fP lines. +If \fIfilename\fP is \fBNULL\fP, then \fI~/.history\fP is truncated. +Returns 0 on success, or \fBerrno\fP on failure. + +.SS History Expansion + +These functions implement history expansion. + +.Fn2 int history_expand "char *string" "char **output" +Expand \fIstring\fP, placing the result into \fIoutput\fP, a pointer +to a string. Returns: +.RS +.PD 0 +.TP +0 +If no expansions took place (or, if the only change in +the text was the removal of escape characters preceding the history expansion +character); +.TP +1 +if expansions did take place; +.TP +-1 +if there was an error in expansion; +.TP +2 +if the returned line should be displayed, but not executed, +as with the \fB:p\fP modifier. +.PD +.RE +If an error ocurred in expansion, then \fIoutput\fP contains a descriptive +error message. + +.Fn3 "char *" get_history_event "const char *string" "int *cindex" "int qchar" +Returns the text of the history event beginning at \fIstring\fP + +\fI*cindex\fP. \fI*cindex\fP is modified to point to after the event +specifier. At function entry, \fIcindex\fP points to the index into +\fIstring\fP where the history event specification begins. \fIqchar\fP +is a character that is allowed to end the event specification in addition +to the ``normal'' terminating characters. + +.Fn1 "char **" history_tokenize "const char *string" +Return an array of tokens parsed out of \fIstring\fP, much as the +shell might. +The tokens are split on the characters in the +\fBhistory_word_delimiters\fP variable, +and shell quoting conventions are obeyed. + +.Fn3 "char *" history_arg_extract "int first" "int last" "const char *string" +Extract a string segment consisting of the \fIfirst\fP through \fIlast\fP +arguments present in \fIstring\fP. Arguments are split using +\fBhistory_tokenize()\fP. + +.SS History Variables + +This section describes the externally-visible variables exported by +the GNU History Library. + +.Vb int history_base +The logical offset of the first entry in the history list. + +.Vb int history_length +The number of entries currently stored in the history list. + +.Vb int history_max_entries +The maximum number of history entries. This must be changed using +\fBstifle_history()\fP. + +.Vb int history_wite_timestamps +If non-zero, timestamps are written to the history file, so they can be +preserved between sessions. The default value is 0, meaning that +timestamps are not saved. +The current timestamp format uses the value of \fIhistory_comment_char\fP +to delimit timestamp entries in the history file. If that variable does +not have a value (the default), timestamps will not be written. + +.Vb char history_expansion_char +The character that introduces a history event. The default is \fB!\fP. +Setting this to 0 inhibits history expansion. + +.Vb char history_subst_char +The character that invokes word substitution if found at the start of +a line. The default is \fB^\fP. + +.Vb char history_comment_char +During tokenization, if this character is seen as the first character +of a word, then it and all subsequent characters up to a newline are +ignored, suppressing history expansion for the remainder of the line. +This is disabled by default. + +.Vb "char *" history_word_delimiters +The characters that separate tokens for \fBhistory_tokenize()\fP. +The default value is \fB"\ \et\en()<>;&|"\fP. + +.Vb "char *" history_no_expand_chars +The list of characters which inhibit history expansion if found immediately +following \fBhistory_expansion_char\fP. The default is space, tab, newline, +\fB\er\fP, and \fB=\fP. + +.Vb "char *" history_search_delimiter_chars +The list of additional characters which can delimit a history search +string, in addition to space, tab, \fI:\fP and \fI?\fP in the case of +a substring search. The default is empty. + +.Vb int history_quotes_inhibit_expansion +If non-zero, double-quoted words are not scanned for the history expansion +character or the history comment character. The default value is 0. + +.Vb "rl_linebuf_func_t *" history_inhibit_expansion_function +This should be set to the address of a function that takes two arguments: +a \fBchar *\fP (\fIstring\fP) +and an \fBint\fP index into that string (\fIi\fP). +It should return a non-zero value if the history expansion starting at +\fIstring[i]\fP should not be performed; zero if the expansion should +be done. +It is intended for use by applications like \fBbash\fP that use the history +expansion character for additional purposes. +By default, this variable is set to \fBNULL\fP. +.SH FILES +.PD 0 +.TP +.FN ~/.history +Default filename for reading and writing saved history +.PD +.SH "SEE ALSO" +.PD 0 +.TP +\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey +.TP +\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey +.TP +\fIbash\fP(1) +.TP +\fIreadline\fP(3) +.PD +.SH AUTHORS +Brian Fox, Free Software Foundation +.br +bfox@gnu.org +.PP +Chet Ramey, Case Western Reserve University +.br +chet.ramey@case.edu +.SH BUG REPORTS +If you find a bug in the +.B history +library, you should report it. But first, you should +make sure that it really is a bug, and that it appears in the latest +version of the +.B history +library that you have. +.PP +Once you have determined that a bug actually exists, mail a +bug report to \fIbug\-readline\fP@\fIgnu.org\fP. +If you have a fix, you are welcome to mail that +as well! Suggestions and `philosophical' bug reports may be mailed +to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet +newsgroup +.BR gnu.bash.bug . +.PP +Comments and bug reports concerning +this manual page should be directed to +.IR chet.ramey@case.edu . diff --git a/readline/readline/doc/history.texi b/readline/readline/doc/history.texi new file mode 100644 index 0000000000..98e2233277 --- /dev/null +++ b/readline/readline/doc/history.texi @@ -0,0 +1,85 @@ +\input texinfo @c -*-texinfo-*- +@c %**start of header (This is for running Texinfo on a region.) +@setfilename history.info +@settitle GNU History Library +@include version.texi + +@c %**end of header (This is for running Texinfo on a region.) + +@copying +This document describes the GNU History library +(version @value{VERSION}, @value{UPDATED}), +a programming tool that provides a consistent user interface for +recalling lines of previously typed input. + +Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. +A copy of the license is included in the section entitled +``GNU Free Documentation License''. + +@end quotation +@end copying + +@dircategory Libraries +@direntry +* History: (history). The GNU history library API. +@end direntry + +@titlepage +@title GNU History Library +@subtitle Edition @value{EDITION}, for @code{History Library} Version @value{VERSION}. +@subtitle @value{UPDATED-MONTH} +@author Chet Ramey, Case Western Reserve University +@author Brian Fox, Free Software Foundation + +@page + +@vskip 0pt plus 1filll +@insertcopying + +@end titlepage + +@contents + +@ifnottex +@node Top +@top GNU History Library + +This document describes the GNU History library, a programming tool that +provides a consistent user interface for recalling lines of previously +typed input. + +@menu +* Using History Interactively:: GNU History User's Manual. +* Programming with GNU History:: GNU History Programmer's Manual. +* GNU Free Documentation License:: License for copying this manual. +* Concept Index:: Index of concepts described in this manual. +* Function and Variable Index:: Index of externally visible functions + and variables. +@end menu +@end ifnottex + +@syncodeindex fn vr + +@include hsuser.texi +@include hstech.texi + +@node GNU Free Documentation License +@appendix GNU Free Documentation License + +@include fdl.texi + +@node Concept Index +@appendix Concept Index +@printindex cp + +@node Function and Variable Index +@appendix Function and Variable Index +@printindex vr + +@bye diff --git a/readline/readline/doc/hstech.texi b/readline/readline/doc/hstech.texi new file mode 100644 index 0000000000..dbc21c14d9 --- /dev/null +++ b/readline/readline/doc/hstech.texi @@ -0,0 +1,602 @@ +@ignore +This file documents the user interface to the GNU History library. + +Copyright (C) 1988-2016 Free Software Foundation, Inc. +Authored by Brian Fox and Chet Ramey. + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@node Programming with GNU History +@chapter Programming with GNU History + +This chapter describes how to interface programs that you write +with the @sc{gnu} History Library. +It should be considered a technical guide. +For information on the interactive use of @sc{gnu} History, @pxref{Using +History Interactively}. + +@menu +* Introduction to History:: What is the GNU History library for? +* History Storage:: How information is stored. +* History Functions:: Functions that you can use. +* History Variables:: Variables that control behaviour. +* History Programming Example:: Example of using the GNU History Library. +@end menu + +@node Introduction to History +@section Introduction to History + +Many programs read input from the user a line at a time. The @sc{gnu} +History library is able to keep track of those lines, associate arbitrary +data with each line, and utilize information from previous lines in +composing new ones. + +The programmer using the History library has available functions +for remembering lines on a history list, associating arbitrary data +with a line, removing lines from the list, searching through the list +for a line containing an arbitrary text string, and referencing any line +in the list directly. In addition, a history @dfn{expansion} function +is available which provides for a consistent user interface across +different programs. + +The user using programs written with the History library has the +benefit of a consistent user interface with a set of well-known +commands for manipulating the text of previous lines and using that text +in new commands. The basic history manipulation commands are similar to +the history substitution provided by @code{csh}. + +If the programmer desires, he can use the Readline library, which +includes some history manipulation by default, and has the added +advantage of command line editing. + +Before declaring any functions using any functionality the History +library provides in other code, an application writer should include +the file @code{} in any file that uses the +History library's features. It supplies extern declarations for all +of the library's public functions and variables, and declares all of +the public data structures. + +@node History Storage +@section History Storage + +The history list is an array of history entries. A history entry is +declared as follows: + +@example +typedef void *histdata_t; + +typedef struct _hist_entry @{ + char *line; + char *timestamp; + histdata_t data; +@} HIST_ENTRY; +@end example + +The history list itself might therefore be declared as + +@example +HIST_ENTRY **the_history_list; +@end example + +The state of the History library is encapsulated into a single structure: + +@example +/* + * A structure used to pass around the current state of the history. + */ +typedef struct _hist_state @{ + HIST_ENTRY **entries; /* Pointer to the entries themselves. */ + int offset; /* The location pointer within this array. */ + int length; /* Number of elements within this array. */ + int size; /* Number of slots allocated to this array. */ + int flags; +@} HISTORY_STATE; +@end example + +If the flags member includes @code{HS_STIFLED}, the history has been +stifled. + +@node History Functions +@section History Functions + +This section describes the calling sequence for the various functions +exported by the @sc{gnu} History library. + +@menu +* Initializing History and State Management:: Functions to call when you + want to use history in a + program. +* History List Management:: Functions used to manage the list + of history entries. +* Information About the History List:: Functions returning information about + the history list. +* Moving Around the History List:: Functions used to change the position + in the history list. +* Searching the History List:: Functions to search the history list + for entries containing a string. +* Managing the History File:: Functions that read and write a file + containing the history list. +* History Expansion:: Functions to perform csh-like history + expansion. +@end menu + +@node Initializing History and State Management +@subsection Initializing History and State Management + +This section describes functions used to initialize and manage +the state of the History library when you want to use the history +functions in your program. + +@deftypefun void using_history (void) +Begin a session in which the history functions might be used. This +initializes the interactive variables. +@end deftypefun + +@deftypefun {HISTORY_STATE *} history_get_history_state (void) +Return a structure describing the current state of the input history. +@end deftypefun + +@deftypefun void history_set_history_state (HISTORY_STATE *state) +Set the state of the history list according to @var{state}. +@end deftypefun + +@node History List Management +@subsection History List Management + +These functions manage individual entries on the history list, or set +parameters managing the list itself. + +@deftypefun void add_history (const char *string) +Place @var{string} at the end of the history list. The associated data +field (if any) is set to @code{NULL}. +If the maximum number of history entries has been set using +@code{stifle_history()}, and the new number of history entries would exceed +that maximum, the oldest history entry is removed. +@end deftypefun + +@deftypefun void add_history_time (const char *string) +Change the time stamp associated with the most recent history entry to +@var{string}. +@end deftypefun + +@deftypefun {HIST_ENTRY *} remove_history (int which) +Remove history entry at offset @var{which} from the history. The +removed element is returned so you can free the line, data, +and containing structure. +@end deftypefun + +@deftypefun {histdata_t} free_history_entry (HIST_ENTRY *histent) +Free the history entry @var{histent} and any history library private +data associated with it. Returns the application-specific data +so the caller can dispose of it. +@end deftypefun + +@deftypefun {HIST_ENTRY *} replace_history_entry (int which, const char *line, histdata_t data) +Make the history entry at offset @var{which} have @var{line} and @var{data}. +This returns the old entry so the caller can dispose of any +application-specific data. In the case +of an invalid @var{which}, a @code{NULL} pointer is returned. +@end deftypefun + +@deftypefun void clear_history (void) +Clear the history list by deleting all the entries. +@end deftypefun + +@deftypefun void stifle_history (int max) +Stifle the history list, remembering only the last @var{max} entries. +The history list will contain only @var{max} entries at a time. +@end deftypefun + +@deftypefun int unstifle_history (void) +Stop stifling the history. This returns the previously-set +maximum number of history entries (as set by @code{stifle_history()}). +The value is positive if the history was +stifled, negative if it wasn't. +@end deftypefun + +@deftypefun int history_is_stifled (void) +Returns non-zero if the history is stifled, zero if it is not. +@end deftypefun + +@node Information About the History List +@subsection Information About the History List + +These functions return information about the entire history list or +individual list entries. + +@deftypefun {HIST_ENTRY **} history_list (void) +Return a @code{NULL} terminated array of @code{HIST_ENTRY *} which is the +current input history. Element 0 of this list is the beginning of time. +If there is no history, return @code{NULL}. +@end deftypefun + +@deftypefun int where_history (void) +Returns the offset of the current history element. +@end deftypefun + +@deftypefun {HIST_ENTRY *} current_history (void) +Return the history entry at the current position, as determined by +@code{where_history()}. If there is no entry there, return a @code{NULL} +pointer. +@end deftypefun + +@deftypefun {HIST_ENTRY *} history_get (int offset) +Return the history entry at position @var{offset}. +The range of valid +values of @var{offset} starts at @code{history_base} and ends at +@var{history_length} - 1 (@pxref{History Variables}). +If there is no entry there, or if @var{offset} is outside the valid +range, return a @code{NULL} pointer. +@end deftypefun + +@deftypefun time_t history_get_time (HIST_ENTRY *entry) +Return the time stamp associated with the history entry @var{entry}. +If the timestamp is missing or invalid, return 0. +@end deftypefun + +@deftypefun int history_total_bytes (void) +Return the number of bytes that the primary history entries are using. +This function returns the sum of the lengths of all the lines in the +history. +@end deftypefun + +@node Moving Around the History List +@subsection Moving Around the History List + +These functions allow the current index into the history list to be +set or changed. + +@deftypefun int history_set_pos (int pos) +Set the current history offset to @var{pos}, an absolute index +into the list. +Returns 1 on success, 0 if @var{pos} is less than zero or greater +than the number of history entries. +@end deftypefun + +@deftypefun {HIST_ENTRY *} previous_history (void) +Back up the current history offset to the previous history entry, and +return a pointer to that entry. If there is no previous entry, return +a @code{NULL} pointer. +@end deftypefun + +@deftypefun {HIST_ENTRY *} next_history (void) +If the current history offset refers to a valid history entry, +increment the current history offset. +If the possibly-incremented history offset refers to a valid history +entry, return a pointer to that entry; +otherwise, return a @code{BNULL} pointer. +@end deftypefun + +@node Searching the History List +@subsection Searching the History List +@cindex History Searching + +These functions allow searching of the history list for entries containing +a specific string. Searching may be performed both forward and backward +from the current history position. The search may be @dfn{anchored}, +meaning that the string must match at the beginning of the history entry. +@cindex anchored search + +@deftypefun int history_search (const char *string, int direction) +Search the history for @var{string}, starting at the current history offset. +If @var{direction} is less than 0, then the search is through +previous entries, otherwise through subsequent entries. +If @var{string} is found, then +the current history index is set to that history entry, and the value +returned is the offset in the line of the entry where +@var{string} was found. Otherwise, nothing is changed, and a -1 is +returned. +@end deftypefun + +@deftypefun int history_search_prefix (const char *string, int direction) +Search the history for @var{string}, starting at the current history +offset. The search is anchored: matching lines must begin with +@var{string}. If @var{direction} is less than 0, then the search is +through previous entries, otherwise through subsequent entries. +If @var{string} is found, then the +current history index is set to that entry, and the return value is 0. +Otherwise, nothing is changed, and a -1 is returned. +@end deftypefun + +@deftypefun int history_search_pos (const char *string, int direction, int pos) +Search for @var{string} in the history list, starting at @var{pos}, an +absolute index into the list. If @var{direction} is negative, the search +proceeds backward from @var{pos}, otherwise forward. Returns the absolute +index of the history element where @var{string} was found, or -1 otherwise. +@end deftypefun + +@node Managing the History File +@subsection Managing the History File + +The History library can read the history from and write it to a file. +This section documents the functions for managing a history file. + +@deftypefun int read_history (const char *filename) +Add the contents of @var{filename} to the history list, a line at a time. +If @var{filename} is @code{NULL}, then read from @file{~/.history}. +Returns 0 if successful, or @code{errno} if not. +@end deftypefun + +@deftypefun int read_history_range (const char *filename, int from, int to) +Read a range of lines from @var{filename}, adding them to the history list. +Start reading at line @var{from} and end at @var{to}. +If @var{from} is zero, start at the beginning. If @var{to} is less than +@var{from}, then read until the end of the file. If @var{filename} is +@code{NULL}, then read from @file{~/.history}. Returns 0 if successful, +or @code{errno} if not. +@end deftypefun + +@deftypefun int write_history (const char *filename) +Write the current history to @var{filename}, overwriting @var{filename} +if necessary. +If @var{filename} is @code{NULL}, then write the history list to +@file{~/.history}. +Returns 0 on success, or @code{errno} on a read or write error. +@end deftypefun + +@deftypefun int append_history (int nelements, const char *filename) +Append the last @var{nelements} of the history list to @var{filename}. +If @var{filename} is @code{NULL}, then append to @file{~/.history}. +Returns 0 on success, or @code{errno} on a read or write error. +@end deftypefun + +@deftypefun int history_truncate_file (const char *filename, int nlines) +Truncate the history file @var{filename}, leaving only the last +@var{nlines} lines. +If @var{filename} is @code{NULL}, then @file{~/.history} is truncated. +Returns 0 on success, or @code{errno} on failure. +@end deftypefun + +@node History Expansion +@subsection History Expansion + +These functions implement history expansion. + +@deftypefun int history_expand (char *string, char **output) +Expand @var{string}, placing the result into @var{output}, a pointer +to a string (@pxref{History Interaction}). Returns: +@table @code +@item 0 +If no expansions took place (or, if the only change in +the text was the removal of escape characters preceding the history expansion +character); +@item 1 +if expansions did take place; +@item -1 +if there was an error in expansion; +@item 2 +if the returned line should be displayed, but not executed, +as with the @code{:p} modifier (@pxref{Modifiers}). +@end table + +If an error occurred in expansion, then @var{output} contains a descriptive +error message. +@end deftypefun + +@deftypefun {char *} get_history_event (const char *string, int *cindex, int qchar) +Returns the text of the history event beginning at @var{string} + +@var{*cindex}. @var{*cindex} is modified to point to after the event +specifier. At function entry, @var{cindex} points to the index into +@var{string} where the history event specification begins. @var{qchar} +is a character that is allowed to end the event specification in addition +to the ``normal'' terminating characters. +@end deftypefun + +@deftypefun {char **} history_tokenize (const char *string) +Return an array of tokens parsed out of @var{string}, much as the +shell might. The tokens are split on the characters in the +@var{history_word_delimiters} variable, +and shell quoting conventions are obeyed as described below. +@end deftypefun + +@deftypefun {char *} history_arg_extract (int first, int last, const char *string) +Extract a string segment consisting of the @var{first} through @var{last} +arguments present in @var{string}. Arguments are split using +@code{history_tokenize}. +@end deftypefun + +@node History Variables +@section History Variables + +This section describes the externally-visible variables exported by +the @sc{gnu} History Library. + +@deftypevar int history_base +The logical offset of the first entry in the history list. +@end deftypevar + +@deftypevar int history_length +The number of entries currently stored in the history list. +@end deftypevar + +@deftypevar int history_max_entries +The maximum number of history entries. This must be changed using +@code{stifle_history()}. +@end deftypevar + +@deftypevar int history_write_timestamps +If non-zero, timestamps are written to the history file, so they can be +preserved between sessions. The default value is 0, meaning that +timestamps are not saved. + +The current timestamp format uses the value of @var{history_comment_char} +to delimit timestamp entries in the history file. If that variable does +not have a value (the default), timestamps will not be written. +@end deftypevar + +@deftypevar char history_expansion_char +The character that introduces a history event. The default is @samp{!}. +Setting this to 0 inhibits history expansion. +@end deftypevar + +@deftypevar char history_subst_char +The character that invokes word substitution if found at the start of +a line. The default is @samp{^}. +@end deftypevar + +@deftypevar char history_comment_char +During tokenization, if this character is seen as the first character +of a word, then it and all subsequent characters up to a newline are +ignored, suppressing history expansion for the remainder of the line. +This is disabled by default. +@end deftypevar + +@deftypevar {char *} history_word_delimiters +The characters that separate tokens for @code{history_tokenize()}. +The default value is @code{" \t\n()<>;&|"}. +@end deftypevar + +@deftypevar {char *} history_search_delimiter_chars +The list of additional characters which can delimit a history search +string, in addition to space, TAB, @samp{:} and @samp{?} in the case of +a substring search. The default is empty. +@end deftypevar + +@deftypevar {char *} history_no_expand_chars +The list of characters which inhibit history expansion if found immediately +following @var{history_expansion_char}. The default is space, tab, newline, +carriage return, and @samp{=}. +@end deftypevar + +@deftypevar int history_quotes_inhibit_expansion +If non-zero, the history expansion code implements shell-like quoting: +single-quoted words are not scanned for the history expansion +character or the history comment character, and double-quoted words may +have history expansion performed, since single quotes are not special +within double quotes. +The default value is 0. +@end deftypevar + +@deftypevar int history_quoting_state +An application may set this variable to indicate that the current line +being expanded is subject to existing quoting. If set to @samp{'}, the +history expansion function will assume that the line is single-quoted and +inhibit expansion until it reads an unquoted closing single quote; if set +to @samp{"}, history expansion will assume the line is double quoted until +it reads an unquoted closing double quote. If set to zero, the default, +the history expansion function will assume the line is not quoted and +treat quote characters within the line as described above. +This is only effective if @var{history_quotes_inhibit_expansion} is set. +@end deftypevar + +@deftypevar {rl_linebuf_func_t *} history_inhibit_expansion_function +This should be set to the address of a function that takes two arguments: +a @code{char *} (@var{string}) +and an @code{int} index into that string (@var{i}). +It should return a non-zero value if the history expansion starting at +@var{string[i]} should not be performed; zero if the expansion should +be done. +It is intended for use by applications like Bash that use the history +expansion character for additional purposes. +By default, this variable is set to @code{NULL}. +@end deftypevar + +@node History Programming Example +@section History Programming Example + +The following program demonstrates simple use of the @sc{gnu} History Library. + +@smallexample +#include +#include + +main (argc, argv) + int argc; + char **argv; +@{ + char line[1024], *t; + int len, done = 0; + + line[0] = 0; + + using_history (); + while (!done) + @{ + printf ("history$ "); + fflush (stdout); + t = fgets (line, sizeof (line) - 1, stdin); + if (t && *t) + @{ + len = strlen (t); + if (t[len - 1] == '\n') + t[len - 1] = '\0'; + @} + + if (!t) + strcpy (line, "quit"); + + if (line[0]) + @{ + char *expansion; + int result; + + result = history_expand (line, &expansion); + if (result) + fprintf (stderr, "%s\n", expansion); + + if (result < 0 || result == 2) + @{ + free (expansion); + continue; + @} + + add_history (expansion); + strncpy (line, expansion, sizeof (line) - 1); + free (expansion); + @} + + if (strcmp (line, "quit") == 0) + done = 1; + else if (strcmp (line, "save") == 0) + write_history ("history_file"); + else if (strcmp (line, "read") == 0) + read_history ("history_file"); + else if (strcmp (line, "list") == 0) + @{ + register HIST_ENTRY **the_list; + register int i; + + the_list = history_list (); + if (the_list) + for (i = 0; the_list[i]; i++) + printf ("%d: %s\n", i + history_base, the_list[i]->line); + @} + else if (strncmp (line, "delete", 6) == 0) + @{ + int which; + if ((sscanf (line + 6, "%d", &which)) == 1) + @{ + HIST_ENTRY *entry = remove_history (which); + if (!entry) + fprintf (stderr, "No such entry %d\n", which); + else + @{ + free (entry->line); + free (entry); + @} + @} + else + @{ + fprintf (stderr, "non-numeric arg given to `delete'\n"); + @} + @} + @} +@} +@end smallexample diff --git a/readline/readline/doc/hsuser.texi b/readline/readline/doc/hsuser.texi new file mode 100644 index 0000000000..e92c794b39 --- /dev/null +++ b/readline/readline/doc/hsuser.texi @@ -0,0 +1,506 @@ +@ignore +This file documents the user interface to the GNU History library. + +Copyright (C) 1988--2018 Free Software Foundation, Inc. +Authored by Brian Fox and Chet Ramey. + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@node Using History Interactively +@chapter Using History Interactively + +@c GDB bundling modification: +@c @ifclear BashFeatures +@c @defcodeindex bt +@c @end ifclear + +@ifset BashFeatures +This chapter describes how to use the @sc{gnu} History Library +interactively, from a user's standpoint. +It should be considered a user's guide. +For information on using the @sc{gnu} History Library in other programs, +see the @sc{gnu} Readline Library Manual. +@end ifset +@ifclear BashFeatures +This chapter describes how to use the @sc{gnu} History Library interactively, +from a user's standpoint. It should be considered a user's guide. For +information on using the @sc{gnu} History Library in your own programs, +@c GDB bundling modification: +@pxref{Programming with GNU History, , , history, GNU History Library}. +@end ifclear + +@ifset BashFeatures +@menu +* Bash History Facilities:: How Bash lets you manipulate your command + history. +* Bash History Builtins:: The Bash builtin commands that manipulate + the command history. +* History Interaction:: What it feels like using History as a user. +@end menu +@end ifset +@ifclear BashFeatures +@menu +* History Interaction:: What it feels like using History as a user. +@end menu +@end ifclear + +@ifset BashFeatures +@node Bash History Facilities +@section Bash History Facilities +@cindex command history +@cindex history list + +When the @option{-o history} option to the @code{set} builtin +is enabled (@pxref{The Set Builtin}), +the shell provides access to the @dfn{command history}, +the list of commands previously typed. +The value of the @env{HISTSIZE} shell variable is used as the +number of commands to save in a history list. +The text of the last @env{$HISTSIZE} +commands (default 500) is saved. +The shell stores each command in the history list prior to +parameter and variable expansion +but after history expansion is performed, subject to the +values of the shell variables +@env{HISTIGNORE} and @env{HISTCONTROL}. + +When the shell starts up, the history is initialized from the +file named by the @env{HISTFILE} variable (default @file{~/.bash_history}). +The file named by the value of @env{HISTFILE} is truncated, if +necessary, to contain no more than the number of lines specified by +the value of the @env{HISTFILESIZE} variable. +When a shell with history enabled exits, the last +@env{$HISTSIZE} lines are copied from the history list to the file +named by @env{$HISTFILE}. +If the @code{histappend} shell option is set (@pxref{Bash Builtins}), +the lines are appended to the history file, +otherwise the history file is overwritten. +If @env{HISTFILE} +is unset, or if the history file is unwritable, the history is not saved. +After saving the history, the history file is truncated +to contain no more than @env{$HISTFILESIZE} lines. +If @env{HISTFILESIZE} is unset, or set to null, a non-numeric value, or +a numeric value less than zero, the history file is not truncated. + +If the @env{HISTTIMEFORMAT} is set, the time stamp information +associated with each history entry is written to the history file, +marked with the history comment character. +When the history file is read, lines beginning with the history +comment character followed immediately by a digit are interpreted +as timestamps for the following history entry. + +The builtin command @code{fc} may be used to list or edit and re-execute +a portion of the history list. +The @code{history} builtin may be used to display or modify the history +list and manipulate the history file. +When using command-line editing, search commands +are available in each editing mode that provide access to the +history list (@pxref{Commands For History}). + +The shell allows control over which commands are saved on the history +list. The @env{HISTCONTROL} and @env{HISTIGNORE} +variables may be set to cause the shell to save only a subset of the +commands entered. +The @code{cmdhist} +shell option, if enabled, causes the shell to attempt to save each +line of a multi-line command in the same history entry, adding +semicolons where necessary to preserve syntactic correctness. +The @code{lithist} +shell option causes the shell to save the command with embedded newlines +instead of semicolons. +The @code{shopt} builtin is used to set these options. +@xref{The Shopt Builtin}, for a description of @code{shopt}. + +@node Bash History Builtins +@section Bash History Builtins +@cindex history builtins + +Bash provides two builtin commands which manipulate the +history list and history file. + +@table @code + +@item fc +@btindex fc +@example +@code{fc [-e @var{ename}] [-lnr] [@var{first}] [@var{last}]} +@code{fc -s [@var{pat}=@var{rep}] [@var{command}]} +@end example + +The first form selects a range of commands from @var{first} to +@var{last} from the history list and displays or edits and re-executes +them. +Both @var{first} and +@var{last} may be specified as a string (to locate the most recent +command beginning with that string) or as a number (an index into the +history list, where a negative number is used as an offset from the +current command number). If @var{last} is not specified, it is set to +@var{first}. If @var{first} is not specified, it is set to the previous +command for editing and @minus{}16 for listing. If the @option{-l} flag is +given, the commands are listed on standard output. The @option{-n} flag +suppresses the command numbers when listing. The @option{-r} flag +reverses the order of the listing. Otherwise, the editor given by +@var{ename} is invoked on a file containing those commands. If +@var{ename} is not given, the value of the following variable expansion +is used: @code{$@{FCEDIT:-$@{EDITOR:-vi@}@}}. This says to use the +value of the @env{FCEDIT} variable if set, or the value of the +@env{EDITOR} variable if that is set, or @code{vi} if neither is set. +When editing is complete, the edited commands are echoed and executed. + +In the second form, @var{command} is re-executed after each instance +of @var{pat} in the selected command is replaced by @var{rep}. +@var{command} is intepreted the same as @var{first} above. + +A useful alias to use with the @code{fc} command is @code{r='fc -s'}, so +that typing @samp{r cc} runs the last command beginning with @code{cc} +and typing @samp{r} re-executes the last command (@pxref{Aliases}). + +@item history +@btindex history +@example +history [@var{n}] +history -c +history -d @var{offset} +history -d @var{start}-@var{end} +history [-anrw] [@var{filename}] +history -ps @var{arg} +@end example + +With no options, display the history list with line numbers. +Lines prefixed with a @samp{*} have been modified. +An argument of @var{n} lists only the last @var{n} lines. +If the shell variable @env{HISTTIMEFORMAT} is set and not null, +it is used as a format string for @var{strftime} to display +the time stamp associated with each displayed history entry. +No intervening blank is printed between the formatted time stamp +and the history line. + +Options, if supplied, have the following meanings: + +@table @code +@item -c +Clear the history list. This may be combined +with the other options to replace the history list completely. + +@item -d @var{offset} +Delete the history entry at position @var{offset}. +If @var{offset} is positive, it should be specified as it appears when +the history is displayed. +If @var{offset} is negative, it is interpreted as relative to one greater +than the last history position, so negative indices count back from the +end of the history, and an index of @samp{-1} refers to the current +@code{history -d} command. + +@item -d @var{start}-@var{end} +Delete the history entries between positions @var{start} and @var{end}, +inclusive. Positive and negative values for @var{start} and @var{end} +are interpreted as described above. + +@item -a +Append the new history lines to the history file. +These are history lines entered since the beginning of the current +Bash session, but not already appended to the history file. + +@item -n +Append the history lines not already read from the history file +to the current history list. These are lines appended to the history +file since the beginning of the current Bash session. + +@item -r +Read the history file and append its contents to +the history list. + +@item -w +Write out the current history list to the history file. + +@item -p +Perform history substitution on the @var{arg}s and display the result +on the standard output, without storing the results in the history list. + +@item -s +The @var{arg}s are added to the end of +the history list as a single entry. + +@end table + +When any of the @option{-w}, @option{-r}, @option{-a}, or @option{-n} options is +used, if @var{filename} +is given, then it is used as the history file. If not, then +the value of the @env{HISTFILE} variable is used. + +@end table +@end ifset + +@node History Interaction +@section History Expansion +@cindex history expansion + +The History library provides a history expansion feature that is similar +to the history expansion provided by @code{csh}. This section +describes the syntax used to manipulate the history information. + +History expansions introduce words from the history list into +the input stream, making it easy to repeat commands, insert the +arguments to a previous command into the current input line, or +fix errors in previous commands quickly. + +@ifset BashFeatures +History expansion is performed immediately after a complete line +is read, before the shell breaks it into words, and is performed +on each line individually. Bash attempts to inform the history +expansion functions about quoting still in effect from previous lines. +@end ifset + +History expansion takes place in two parts. The first is to determine +which line from the history list should be used during substitution. +The second is to select portions of that line for inclusion into the +current one. The line selected from the history is called the +@dfn{event}, and the portions of that line that are acted upon are +called @dfn{words}. Various @dfn{modifiers} are available to manipulate +the selected words. The line is broken into words in the same fashion +that Bash does, so that several words +surrounded by quotes are considered one word. +History expansions are introduced by the appearance of the +history expansion character, which is @samp{!} by default. + +History expansion implements shell-like quoting conventions: +a backslash can be used to remove the special handling for the next character; +single quotes enclose verbatim sequences of characters, and can be used to +inhibit history expansion; +and characters enclosed within double quotes may be subject to history +expansion, since backslash can escape the history expansion character, +but single quotes may not, since they are not treated specially within +double quotes. + +@ifset BashFeatures +When using the shell, only @samp{\} and @samp{'} may be used to escape the +history expansion character, but the history expansion character is +also treated as quoted if it immediately precedes the closing double quote +in a double-quoted string. +@end ifset + +@ifset BashFeatures +Several shell options settable with the @code{shopt} +builtin (@pxref{The Shopt Builtin}) may be used to tailor +the behavior of history expansion. If the +@code{histverify} shell option is enabled, and Readline +is being used, history substitutions are not immediately passed to +the shell parser. +Instead, the expanded line is reloaded into the Readline +editing buffer for further modification. +If Readline is being used, and the @code{histreedit} +shell option is enabled, a failed history expansion will be +reloaded into the Readline editing buffer for correction. +The @option{-p} option to the @code{history} builtin command +may be used to see what a history expansion will do before using it. +The @option{-s} option to the @code{history} builtin may be used to +add commands to the end of the history list without actually executing +them, so that they are available for subsequent recall. +This is most useful in conjunction with Readline. + +The shell allows control of the various characters used by the +history expansion mechanism with the @code{histchars} variable, +as explained above (@pxref{Bash Variables}). The shell uses +the history comment character to mark history timestamps when +writing the history file. +@end ifset + +@menu +* Event Designators:: How to specify which history line to use. +* Word Designators:: Specifying which words are of interest. +* Modifiers:: Modifying the results of substitution. +@end menu + +@node Event Designators +@subsection Event Designators +@cindex event designators + +An event designator is a reference to a command line entry in the +history list. +Unless the reference is absolute, events are relative to the current +position in the history list. +@cindex history events + +@table @asis + +@item @code{!} +@ifset BashFeatures +Start a history substitution, except when followed by a space, tab, +the end of the line, @samp{=} or @samp{(} (when the +@code{extglob} shell option is enabled using the @code{shopt} builtin). +@end ifset +@ifclear BashFeatures +Start a history substitution, except when followed by a space, tab, +the end of the line, or @samp{=}. +@end ifclear + +@item @code{!@var{n}} +Refer to command line @var{n}. + +@item @code{!-@var{n}} +Refer to the command @var{n} lines back. + +@item @code{!!} +Refer to the previous command. This is a synonym for @samp{!-1}. + +@item @code{!@var{string}} +Refer to the most recent command +preceding the current position in the history list +starting with @var{string}. + +@item @code{!?@var{string}[?]} +Refer to the most recent command +preceding the current position in the history list +containing @var{string}. +The trailing +@samp{?} may be omitted if the @var{string} is followed immediately by +a newline. + +@item @code{^@var{string1}^@var{string2}^} +Quick Substitution. Repeat the last command, replacing @var{string1} +with @var{string2}. Equivalent to +@code{!!:s/@var{string1}/@var{string2}/}. + +@item @code{!#} +The entire command line typed so far. + +@end table + +@node Word Designators +@subsection Word Designators + +Word designators are used to select desired words from the event. +A @samp{:} separates the event specification from the word designator. It +may be omitted if the word designator begins with a @samp{^}, @samp{$}, +@samp{*}, @samp{-}, or @samp{%}. Words are numbered from the beginning +of the line, with the first word being denoted by 0 (zero). Words are +inserted into the current line separated by single spaces. + +@need 0.75 +For example, + +@table @code +@item !! +designates the preceding command. When you type this, the preceding +command is repeated in toto. + +@item !!:$ +designates the last argument of the preceding command. This may be +shortened to @code{!$}. + +@item !fi:2 +designates the second argument of the most recent command starting with +the letters @code{fi}. +@end table + +@need 0.75 +Here are the word designators: + +@table @code + +@item 0 (zero) +The @code{0}th word. For many applications, this is the command word. + +@item @var{n} +The @var{n}th word. + +@item ^ +The first argument; that is, word 1. + +@item $ +The last argument. + +@item % +The word matched by the most recent @samp{?@var{string}?} search. + +@item @var{x}-@var{y} +A range of words; @samp{-@var{y}} abbreviates @samp{0-@var{y}}. + +@item * +All of the words, except the @code{0}th. This is a synonym for @samp{1-$}. +It is not an error to use @samp{*} if there is just one word in the event; +the empty string is returned in that case. + +@item @var{x}* +Abbreviates @samp{@var{x}-$} + +@item @var{x}- +Abbreviates @samp{@var{x}-$} like @samp{@var{x}*}, but omits the last word. + +@end table + +If a word designator is supplied without an event specification, the +previous command is used as the event. + +@node Modifiers +@subsection Modifiers + +After the optional word designator, you can add a sequence of one or more +of the following modifiers, each preceded by a @samp{:}. + +@table @code + +@item h +Remove a trailing pathname component, leaving only the head. + +@item t +Remove all leading pathname components, leaving the tail. + +@item r +Remove a trailing suffix of the form @samp{.@var{suffix}}, leaving +the basename. + +@item e +Remove all but the trailing suffix. + +@item p +Print the new command but do not execute it. + +@ifset BashFeatures +@item q +Quote the substituted words, escaping further substitutions. + +@item x +Quote the substituted words as with @samp{q}, +but break into words at spaces, tabs, and newlines. +@end ifset + +@item s/@var{old}/@var{new}/ +Substitute @var{new} for the first occurrence of @var{old} in the +event line. Any delimiter may be used in place of @samp{/}. +The delimiter may be quoted in @var{old} and @var{new} +with a single backslash. If @samp{&} appears in @var{new}, +it is replaced by @var{old}. A single backslash will quote +the @samp{&}. The final delimiter is optional if it is the last +character on the input line. + +@item & +Repeat the previous substitution. + +@item g +@itemx a +Cause changes to be applied over the entire event line. Used in +conjunction with @samp{s}, as in @code{gs/@var{old}/@var{new}/}, +or with @samp{&}. + +@item G +Apply the following @samp{s} modifier once to each word in the event. + +@end table diff --git a/readline/readline/doc/readline.3 b/readline/readline/doc/readline.3 new file mode 100644 index 0000000000..be89c2dff8 --- /dev/null +++ b/readline/readline/doc/readline.3 @@ -0,0 +1,1539 @@ +.\" +.\" MAN PAGE COMMENTS to +.\" +.\" Chet Ramey +.\" Information Network Services +.\" Case Western Reserve University +.\" chet.ramey@case.edu +.\" +.\" Last Change: Thu Dec 28 14:49:51 EST 2017 +.\" +.TH READLINE 3 "2017 December 28" "GNU Readline 7.0" +.\" +.\" File Name macro. This used to be `.PN', for Path Name, +.\" but Sun doesn't seem to like that very much. +.\" +.de FN +\fI\|\\$1\|\fP +.. +.SH NAME +readline \- get a line from a user with editing +.SH SYNOPSIS +.LP +.nf +.ft B +#include +#include +#include +.ft +.fi +.LP +.nf +\fIchar *\fP +.br +\fBreadline\fP (\fIconst char *prompt\fP); +.fi +.SH COPYRIGHT +.if n Readline is Copyright (C) 1989\-2014 Free Software Foundation, Inc. +.if t Readline is Copyright \(co 1989\-2014 Free Software Foundation, Inc. +.SH DESCRIPTION +.LP +.B readline +will read a line from the terminal +and return it, using +.B prompt +as a prompt. If +.B prompt +is \fBNULL\fP or the empty string, no prompt is issued. +The line returned is allocated with +.IR malloc (3); +the caller must free it when finished. The line returned +has the final newline removed, so only the text of the line +remains. +.LP +.B readline +offers editing capabilities while the user is entering the +line. +By default, the line editing commands +are similar to those of emacs. +A vi\-style line editing interface is also available. +.LP +This manual page describes only the most basic use of \fBreadline\fP. +Much more functionality is available; see +\fIThe GNU Readline Library\fP and \fIThe GNU History Library\fP +for additional information. +.SH RETURN VALUE +.LP +.B readline +returns the text of the line read. A blank line +returns the empty string. If +.B EOF +is encountered while reading a line, and the line is empty, +.B NULL +is returned. If an +.B EOF +is read with a non\-empty line, it is +treated as a newline. +.SH NOTATION +.LP +An Emacs-style notation is used to denote +keystrokes. Control keys are denoted by C\-\fIkey\fR, e.g., C\-n +means Control\-N. Similarly, +.I meta +keys are denoted by M\-\fIkey\fR, so M\-x means Meta\-X. (On keyboards +without a +.I meta +key, M\-\fIx\fP means ESC \fIx\fP, i.e., press the Escape key +then the +.I x +key. This makes ESC the \fImeta prefix\fP. +The combination M\-C\-\fIx\fP means ESC\-Control\-\fIx\fP, +or press the Escape key +then hold the Control key while pressing the +.I x +key.) +.PP +Readline commands may be given numeric +.IR arguments , +which normally act as a repeat count. Sometimes, however, it is the +sign of the argument that is significant. Passing a negative argument +to a command that acts in the forward direction (e.g., \fBkill\-line\fP) +causes that command to act in a backward direction. +Commands whose behavior with arguments deviates from this are noted +below. +.PP +When a command is described as \fIkilling\fP text, the text +deleted is saved for possible future retrieval +(\fIyanking\fP). The killed text is saved in a +\fIkill ring\fP. Consecutive kills cause the text to be +accumulated into one unit, which can be yanked all at once. +Commands which do not kill text separate the chunks of text +on the kill ring. +.SH INITIALIZATION FILE +.LP +Readline is customized by putting commands in an initialization +file (the \fIinputrc\fP file). +The name of this file is taken from the value of the +.B INPUTRC +environment variable. If that variable is unset, the default is +.IR ~/.inputrc . +If that file does not exist or cannot be read, the ultimate default is +.IR /etc/inputrc . +When a program which uses the readline library starts up, the +init file is read, and the key bindings and variables are set. +There are only a few basic constructs allowed in the +readline init file. Blank lines are ignored. +Lines beginning with a \fB#\fP are comments. +Lines beginning with a \fB$\fP indicate conditional constructs. +Other lines denote key bindings and variable settings. +Each program using this library may add its own commands +and bindings. +.PP +For example, placing +.RS +.PP +M\-Control\-u: universal\-argument +.RE +or +.RS +C\-Meta\-u: universal\-argument +.RE +.sp +into the +.I inputrc +would make M\-C\-u execute the readline command +.IR universal\-argument . +.PP +The following symbolic character names are recognized while +processing key bindings: +.IR DEL , +.IR ESC , +.IR ESCAPE , +.IR LFD , +.IR NEWLINE , +.IR RET , +.IR RETURN , +.IR RUBOUT , +.IR SPACE , +.IR SPC , +and +.IR TAB . +.PP +In addition to command names, readline allows keys to be bound +to a string that is inserted when the key is pressed (a \fImacro\fP). +.PP +.SS Key Bindings +.PP +The syntax for controlling key bindings in the +.I inputrc +file is simple. All that is required is the name of the +command or the text of a macro and a key sequence to which +it should be bound. The name may be specified in one of two ways: +as a symbolic key name, possibly with \fIMeta\-\fP or \fIControl\-\fP +prefixes, or as a key sequence. +The name and key sequence are separated by a colon. There can be no +whitespace between the name and the colon. +.PP +When using the form \fBkeyname\fP:\^\fIfunction-name\fP or \fImacro\fP, +.I keyname +is the name of a key spelled out in English. For example: +.sp +.RS +Control\-u: universal\-argument +.br +Meta\-Rubout: backward\-kill\-word +.br +Control\-o: "> output" +.RE +.LP +In the above example, +.I C\-u +is bound to the function +.BR universal\-argument , +.I M-DEL +is bound to the function +.BR backward\-kill\-word , +and +.I C\-o +is bound to run the macro +expressed on the right hand side (that is, to insert the text +.if t \f(CW> output\fP +.if n ``> output'' +into the line). +.PP +In the second form, \fB"keyseq"\fP:\^\fIfunction\-name\fP or \fImacro\fP, +.B keyseq +differs from +.B keyname +above in that strings denoting +an entire key sequence may be specified by placing the sequence +within double quotes. Some GNU Emacs style key escapes can be +used, as in the following example, but the symbolic character names +are not recognized. +.sp +.RS +"\eC\-u": universal\-argument +.br +"\eC\-x\eC\-r": re\-read\-init\-file +.br +"\ee[11~": "Function Key 1" +.RE +.PP +In this example, +.I C-u +is again bound to the function +.BR universal\-argument . +.I "C-x C-r" +is bound to the function +.BR re\-read\-init\-file , +and +.I "ESC [ 1 1 ~" +is bound to insert the text +.if t \f(CWFunction Key 1\fP. +.if n ``Function Key 1''. +.PP +The full set of GNU Emacs style escape sequences available when specifying +key sequences is +.RS +.PD 0 +.TP +.B \eC\- +control prefix +.TP +.B \eM\- +meta prefix +.TP +.B \ee +an escape character +.TP +.B \e\e +backslash +.TP +.B \e" +literal ", a double quote +.TP +.B \e' +literal ', a single quote +.RE +.PD +.PP +In addition to the GNU Emacs style escape sequences, a second +set of backslash escapes is available: +.RS +.PD 0 +.TP +.B \ea +alert (bell) +.TP +.B \eb +backspace +.TP +.B \ed +delete +.TP +.B \ef +form feed +.TP +.B \en +newline +.TP +.B \er +carriage return +.TP +.B \et +horizontal tab +.TP +.B \ev +vertical tab +.TP +.B \e\fInnn\fP +the eight-bit character whose value is the octal value \fInnn\fP +(one to three digits) +.TP +.B \ex\fIHH\fP +the eight-bit character whose value is the hexadecimal value \fIHH\fP +(one or two hex digits) +.RE +.PD +.PP +When entering the text of a macro, single or double quotes should +be used to indicate a macro definition. Unquoted text +is assumed to be a function name. +In the macro body, the backslash escapes described above are expanded. +Backslash will quote any other character in the macro text, +including " and '. +.PP +.B Bash +allows the current readline key bindings to be displayed or modified +with the +.B bind +builtin command. The editing mode may be switched during interactive +use by using the +.B \-o +option to the +.B set +builtin command. Other programs using this library provide +similar mechanisms. The +.I inputrc +file may be edited and re-read if a program does not provide +any other means to incorporate new bindings. +.SS Variables +.PP +Readline has variables that can be used to further customize its +behavior. A variable may be set in the +.I inputrc +file with a statement of the form +.RS +.PP +\fBset\fP \fIvariable\-name\fP \fIvalue\fP +.RE +.PP +Except where noted, readline variables can take the values +.B On +or +.B Off +(without regard to case). +Unrecognized variable names are ignored. +When a variable value is read, empty or null values, "on" (case-insensitive), +and "1" are equivalent to \fBOn\fP. All other values are equivalent to +\fBOff\fP. +The variables and their default values are: +.PP +.PD 0 +.TP +.B bell\-style (audible) +Controls what happens when readline wants to ring the terminal bell. +If set to \fBnone\fP, readline never rings the bell. If set to +\fBvisible\fP, readline uses a visible bell if one is available. +If set to \fBaudible\fP, readline attempts to ring the terminal's bell. +.TP +.B bind\-tty\-special\-chars (On) +If set to \fBOn\fP (the default), readline attempts to bind the control +characters treated specially by the kernel's terminal driver to their +readline equivalents. +.TP +.B blink\-matching\-paren (Off) +If set to \fBOn\fP, readline attempts to briefly move the cursor to an +opening parenthesis when a closing parenthesis is inserted. +.TP +.B colored\-completion\-prefix (Off) +If set to \fBOn\fP, when listing completions, readline displays the +common prefix of the set of possible completions using a different color. +The color definitions are taken from the value of the \fBLS_COLORS\fP +environment variable. +.TP +.B colored\-stats (Off) +If set to \fBOn\fP, readline displays possible completions using different +colors to indicate their file type. +The color definitions are taken from the value of the \fBLS_COLORS\fP +environment variable. +.TP +.B comment\-begin (``#'') +The string that is inserted in \fBvi\fP mode when the +.B insert\-comment +command is executed. +This command is bound to +.B M\-# +in emacs mode and to +.B # +in vi command mode. +.TP +.B completion\-display\-width (\-1) +The number of screen columns used to display possible matches +when performing completion. +The value is ignored if it is less than 0 or greater than the terminal +screen width. +A value of 0 will cause matches to be displayed one per line. +The default value is \-1. +.TP +.B completion\-ignore\-case (Off) +If set to \fBOn\fP, readline performs filename matching and completion +in a case\-insensitive fashion. +.TP +.B completion\-map\-case (Off) +If set to \fBOn\fP, and \fBcompletion\-ignore\-case\fP is enabled, readline +treats hyphens (\fI\-\fP) and underscores (\fI_\fP) as equivalent when +performing case\-insensitive filename matching and completion. +.TP +.B completion\-prefix\-display\-length (0) +The length in characters of the common prefix of a list of possible +completions that is displayed without modification. When set to a +value greater than zero, common prefixes longer than this value are +replaced with an ellipsis when displaying possible completions. +.TP +.B completion\-query\-items (100) +This determines when the user is queried about viewing +the number of possible completions +generated by the \fBpossible\-completions\fP command. +It may be set to any integer value greater than or equal to +zero. If the number of possible completions is greater than +or equal to the value of this variable, the user is asked whether +or not he wishes to view them; otherwise they are simply listed +on the terminal. A negative value causes readline to never ask. +.TP +.B convert\-meta (On) +If set to \fBOn\fP, readline will convert characters with the +eighth bit set to an ASCII key sequence +by stripping the eighth bit and prefixing it with an +escape character (in effect, using escape as the \fImeta prefix\fP). +The default is \fIOn\fP, but readline will set it to \fIOff\fP if the +locale contains eight-bit characters. +.TP +.B disable\-completion (Off) +If set to \fBOn\fP, readline will inhibit word completion. Completion +characters will be inserted into the line as if they had been +mapped to \fBself-insert\fP. +.TP +.B echo\-control\-characters (On) +When set to \fBOn\fP, on operating systems that indicate they support it, +readline echoes a character corresponding to a signal generated from the +keyboard. +.TP +.B editing\-mode (emacs) +Controls whether readline begins with a set of key bindings similar +to \fIEmacs\fP or \fIvi\fP. +.B editing\-mode +can be set to either +.B emacs +or +.BR vi . +.TP +.B emacs\-mode\-string (@) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when emacs editing mode is active. The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B enable\-bracketed\-paste (Off) +When set to \fBOn\fP, readline will configure the terminal in a way +that will enable it to insert each paste into the editing buffer as a +single string of characters, instead of treating each character as if +it had been read from the keyboard. This can prevent pasted characters +from being interpreted as editing commands. +.TP +.B enable\-keypad (Off) +When set to \fBOn\fP, readline will try to enable the application +keypad when it is called. Some systems need this to enable the +arrow keys. +.TP +.B enable\-meta\-key (On) +When set to \fBOn\fP, readline will try to enable any meta modifier +key the terminal claims to support when it is called. On many terminals, +the meta key is used to send eight-bit characters. +.TP +.B expand\-tilde (Off) +If set to \fBOn\fP, tilde expansion is performed when readline +attempts word completion. +.TP +.B history\-preserve\-point (Off) +If set to \fBOn\fP, the history code attempts to place point at the +same location on each history line retrieved with \fBprevious-history\fP +or \fBnext-history\fP. +.TP +.B history\-size (unset) +Set the maximum number of history entries saved in the history list. +If set to zero, any existing history entries are deleted and no new entries +are saved. +If set to a value less than zero, the number of history entries is not +limited. +By default, the number of history entries is not limited. +If an attempt is made to set \fIhistory\-size\fP to a non-numeric value, +the maximum number of history entries will be set to 500. +.TP +.B horizontal\-scroll\-mode (Off) +When set to \fBOn\fP, makes readline use a single line for display, +scrolling the input horizontally on a single screen line when it +becomes longer than the screen width rather than wrapping to a new line. +.TP +.B input\-meta (Off) +If set to \fBOn\fP, readline will enable eight-bit input (that is, +it will not clear the eighth bit in the characters it reads), +regardless of what the terminal claims it can support. The name +.B meta\-flag +is a synonym for this variable. +The default is \fIOff\fP, but readline will set it to \fIOn\fP if the +locale contains eight-bit characters. +.TP +.B isearch\-terminators (``C\-[ C\-J'') +The string of characters that should terminate an incremental +search without subsequently executing the character as a command. +If this variable has not been given a value, the characters +\fIESC\fP and \fIC\-J\fP will terminate an incremental search. +.TP +.B keymap (emacs) +Set the current readline keymap. The set of legal keymap names is +\fIemacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, +vi-command\fP, and +.IR vi-insert . +\fIvi\fP is equivalent to \fIvi-command\fP; \fIemacs\fP is +equivalent to \fIemacs-standard\fP. The default value is +.IR emacs . +The value of +.B editing\-mode +also affects the default keymap. +.TP +.B keyseq\-timeout (500) +Specifies the duration \fIreadline\fP will wait for a character when reading an +ambiguous key sequence (one that can form a complete key sequence using +the input read so far, or can take additional input to complete a longer +key sequence). +If no input is received within the timeout, \fIreadline\fP will use the shorter +but complete key sequence. +The value is specified in milliseconds, so a value of 1000 means that +\fIreadline\fP will wait one second for additional input. +If this variable is set to a value less than or equal to zero, or to a +non-numeric value, \fIreadline\fP will wait until another key is pressed to +decide which key sequence to complete. +.TP +.B mark\-directories (On) +If set to \fBOn\fP, completed directory names have a slash +appended. +.TP +.B mark\-modified\-lines (Off) +If set to \fBOn\fP, history lines that have been modified are displayed +with a preceding asterisk (\fB*\fP). +.TP +.B mark\-symlinked\-directories (Off) +If set to \fBOn\fP, completed names which are symbolic links to directories +have a slash appended (subject to the value of +\fBmark\-directories\fP). +.TP +.B match\-hidden\-files (On) +This variable, when set to \fBOn\fP, causes readline to match files whose +names begin with a `.' (hidden files) when performing filename +completion. +If set to \fBOff\fP, the leading `.' must be +supplied by the user in the filename to be completed. +.TP +.B menu\-complete\-display\-prefix (Off) +If set to \fBOn\fP, menu completion displays the common prefix of the +list of possible completions (which may be empty) before cycling through +the list. +.TP +.B output\-meta (Off) +If set to \fBOn\fP, readline will display characters with the +eighth bit set directly rather than as a meta-prefixed escape +sequence. +The default is \fIOff\fP, but readline will set it to \fIOn\fP if the +locale contains eight-bit characters. +.TP +.B page\-completions (On) +If set to \fBOn\fP, readline uses an internal \fImore\fP-like pager +to display a screenful of possible completions at a time. +.TP +.B print\-completions\-horizontally (Off) +If set to \fBOn\fP, readline will display completions with matches +sorted horizontally in alphabetical order, rather than down the screen. +.TP +.B revert\-all\-at\-newline (Off) +If set to \fBOn\fP, readline will undo all changes to history lines +before returning when \fBaccept\-line\fP is executed. By default, +history lines may be modified and retain individual undo lists across +calls to \fBreadline\fP. +.TP +.B show\-all\-if\-ambiguous (Off) +This alters the default behavior of the completion functions. If +set to +.BR On , +words which have more than one possible completion cause the +matches to be listed immediately instead of ringing the bell. +.TP +.B show\-all\-if\-unmodified (Off) +This alters the default behavior of the completion functions in +a fashion similar to \fBshow\-all\-if\-ambiguous\fP. +If set to +.BR On , +words which have more than one possible completion without any +possible partial completion (the possible completions don't share +a common prefix) cause the matches to be listed immediately instead +of ringing the bell. +.TP +.B show\-mode\-in\-prompt (Off) +If set to \fBOn\fP, add a string to the beginning of the prompt +indicating the editing mode: emacs, vi command, or vi insertion. +The mode strings are user-settable (e.g., \fIemacs\-mode\-string\fP). +.TP +.B skip\-completed\-text (Off) +If set to \fBOn\fP, this alters the default completion behavior when +inserting a single match into the line. It's only active when +performing completion in the middle of a word. If enabled, readline +does not insert characters from the completion that match characters +after point in the word being completed, so portions of the word +following the cursor are not duplicated. +.TP +.B vi\-cmd\-mode\-string ((cmd)) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in command mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B vi\-ins\-mode\-string ((ins)) +If the \fIshow\-mode\-in\-prompt\fP variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in insertion mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the \e1 and \e2 escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +.TP +.B visible\-stats (Off) +If set to \fBOn\fP, a character denoting a file's type as reported +by \fIstat\fP(2) is appended to the filename when listing possible +completions. +.PD +.SS Conditional Constructs +.PP +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key +bindings and variable settings to be performed as the result +of tests. There are four parser directives used. +.IP \fB$if\fP +The +.B $if +construct allows bindings to be made based on the +editing mode, the terminal being used, or the application using +readline. The text of the test, after any comparison operator, +extends to the end of the line; +unless otherwise noted, no characters are required to isolate it. +.RS +.IP \fBmode\fP +The \fBmode=\fP form of the \fB$if\fP directive is used to test +whether readline is in emacs or vi mode. +This may be used in conjunction +with the \fBset keymap\fP command, for instance, to set bindings in +the \fIemacs-standard\fP and \fIemacs-ctlx\fP keymaps only if +readline is starting out in emacs mode. +.IP \fBterm\fP +The \fBterm=\fP form may be used to include terminal-specific +key bindings, perhaps to bind the key sequences output by the +terminal's function keys. The word on the right side of the +.B = +is tested against the full name of the terminal and the portion +of the terminal name before the first \fB\-\fP. This allows +.I sun +to match both +.I sun +and +.IR sun\-cmd , +for instance. +.IP \fBversion\fP +The \fBversion\fP test may be used to perform comparisons against +specific readline versions. +The \fBversion\fP expands to the current readline version. +The set of comparison operators includes +.BR = , +(and +.BR == ), +.BR != , +.BR <= , +.BR >= , +.BR < , +and +.BR > . +The version number supplied on the right side of the operator consists +of a major version number, an optional decimal point, and an optional +minor version (e.g., \fB7.1\fP). If the minor version is omitted, it +is assumed to be \fB0\fP. +The operator may be separated from the string \fBversion\fP +and from the version number argument by whitespace. +.IP \fBapplication\fP +The \fBapplication\fP construct is used to include +application-specific settings. Each program using the readline +library sets the \fIapplication name\fP, and an initialization +file can test for a particular value. +This could be used to bind key sequences to functions useful for +a specific program. For instance, the following command adds a +key sequence that quotes the current or previous word in \fBbash\fP: +.sp 1 +.RS +.nf +\fB$if\fP Bash +# Quote the current or previous word +"\eC-xq": "\eeb\e"\eef\e"" +\fB$endif\fP +.fi +.RE +.IP \fIvariable\fP +The \fIvariable\fP construct provides simple equality tests for readline +variables and values. +The permitted comparison operators are \fI=\fP, \fI==\fP, and \fI!=\fP. +The variable name must be separated from the comparison operator by +whitespace; the operator may be separated from the value on the right hand +side by whitespace. +Both string and boolean variables may be tested. Boolean variables must be +tested against the values \fIon\fP and \fIoff\fP. +.RE +.IP \fB$endif\fP +This command, as seen in the previous example, terminates an +\fB$if\fP command. +.IP \fB$else\fP +Commands in this branch of the \fB$if\fP directive are executed if +the test fails. +.IP \fB$include\fP +This directive takes a single filename as an argument and reads commands +and bindings from that file. For example, the following directive +would read \fI/etc/inputrc\fP: +.sp 1 +.RS +.nf +\fB$include\fP \^ \fI/etc/inputrc\fP +.fi +.RE +.SH SEARCHING +.PP +Readline provides commands for searching through the command history +for lines containing a specified string. +There are two search modes: +.I incremental +and +.IR non-incremental . +.PP +Incremental searches begin before the user has finished typing the +search string. +As each character of the search string is typed, readline displays +the next entry from the history matching the string typed so far. +An incremental search requires only as many characters as needed to +find the desired history entry. +To search backward in the history for a particular string, type +\fBC\-r\fP. Typing \fBC\-s\fP searches forward through the history. +The characters present in the value of the \fBisearch-terminators\fP +variable are used to terminate an incremental search. +If that variable has not been assigned a value the \fIEscape\fP and +\fBC\-J\fP characters will terminate an incremental search. +\fBC\-G\fP will abort an incremental search and restore the original +line. +When the search is terminated, the history entry containing the +search string becomes the current line. +.PP +To find other matching entries in the history list, type \fBC\-s\fP or +\fBC\-r\fP as appropriate. +This will search backward or forward in the history for the next +line matching the search string typed so far. +Any other key sequence bound to a readline command will terminate +the search and execute that command. +For instance, a newline will terminate the search and accept +the line, thereby executing the command from the history list. +A movement command will terminate the search, make the last line found +the current line, and begin editing. +.PP +Non-incremental searches read the entire search string before starting +to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. +.SH EDITING COMMANDS +.PP +The following is a list of the names of the commands and the default +key sequences to which they are bound. +Command names without an accompanying key sequence are unbound by default. +.PP +In the following descriptions, \fIpoint\fP refers to the current cursor +position, and \fImark\fP refers to a cursor position saved by the +\fBset\-mark\fP command. +The text between the point and mark is referred to as the \fIregion\fP. +.SS Commands for Moving +.PP +.PD 0 +.TP +.B beginning\-of\-line (C\-a) +Move to the start of the current line. +.TP +.B end\-of\-line (C\-e) +Move to the end of the line. +.TP +.B forward\-char (C\-f) +Move forward a character. +.TP +.B backward\-char (C\-b) +Move back a character. +.TP +.B forward\-word (M\-f) +Move forward to the end of the next word. Words are composed of +alphanumeric characters (letters and digits). +.TP +.B backward\-word (M\-b) +Move back to the start of the current or previous word. Words are +composed of alphanumeric characters (letters and digits). +.TP +.B previous\-screen\-line +Attempt to move point to the same physical screen column on the previous +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if point is not +greater than the length of the prompt plus the screen width. +.TP +.B next\-screen\-line +Attempt to move point to the same physical screen column on the next +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if the length +of the current Readline line is not greater than the length of the prompt +plus the screen width. +.TP +.B clear\-screen (C\-l) +Clear the screen leaving the current line at the top of the screen. +With an argument, refresh the current line without clearing the +screen. +.TP +.B redraw\-current\-line +Refresh the current line. +.PD +.SS Commands for Manipulating the History +.PP +.PD 0 +.TP +.B accept\-line (Newline, Return) +Accept the line regardless of where the cursor is. +If this line is +non-empty, it may be added to the history list for future recall with +\fBadd_history()\fP. +If the line is a modified history line, the history line is restored to its original state. +.TP +.B previous\-history (C\-p) +Fetch the previous command from the history list, moving back in +the list. +.TP +.B next\-history (C\-n) +Fetch the next command from the history list, moving forward in the +list. +.TP +.B beginning\-of\-history (M\-<) +Move to the first line in the history. +.TP +.B end\-of\-history (M\->) +Move to the end of the input history, i.e., the line currently being +entered. +.TP +.B reverse\-search\-history (C\-r) +Search backward starting at the current line and moving `up' through +the history as necessary. This is an incremental search. +.TP +.B forward\-search\-history (C\-s) +Search forward starting at the current line and moving `down' through +the history as necessary. This is an incremental search. +.TP +.B non\-incremental\-reverse\-search\-history (M\-p) +Search backward through the history starting at the current line +using a non-incremental search for a string supplied by the user. +.TP +.B non\-incremental\-forward\-search\-history (M\-n) +Search forward through the history using a non-incremental search +for a string supplied by the user. +.TP +.B history\-search\-backward +Search backward through the history for the string of characters +between the start of the current line and the current cursor +position (the \fIpoint\fP). +The search string must match at the beginning of a history line. +This is a non-incremental search. +.TP +.B history\-search\-forward +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string must match at the beginning of a history line. +This is a non-incremental search. +.TP +.B history\-substring\-search\-backward +Search backward through the history for the string of characters +between the start of the current line and the current cursor +position (the \fIpoint\fP). +The search string may match anywhere in a history line. +This is a non-incremental search. +.TP +.B history\-substring\-search\-forward +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string may match anywhere in a history line. +This is a non-incremental search. +.TP +.B yank\-nth\-arg (M\-C\-y) +Insert the first argument to the previous command (usually +the second word on the previous line) at point. +With an argument +.IR n , +insert the \fIn\fPth word from the previous command (the words +in the previous command begin with word 0). A negative argument +inserts the \fIn\fPth word from the end of the previous command. +Once the argument \fIn\fP is computed, the argument is extracted +as if the "!\fIn\fP" history expansion had been specified. +.TP +.B +yank\-last\-arg (M\-.\^, M\-_\^) +Insert the last argument to the previous command (the last word of +the previous history entry). +With a numeric argument, behave exactly like \fByank\-nth\-arg\fP. +Successive calls to \fByank\-last\-arg\fP move back through the history +list, inserting the last word (or the word specified by the argument to +the first call) of each line in turn. +Any numeric argument supplied to these successive calls determines +the direction to move through the history. A negative argument switches +the direction through the history (back or forward). +The history expansion facilities are used to extract the last argument, +as if the "!$" history expansion had been specified. +.PD +.SS Commands for Changing Text +.PP +.PD 0 +.TP +.B \fIend\-of\-file\fP (usually C\-d) +The character indicating end-of-file as set, for example, by +.if t \f(CWstty\fP. +.if n ``stty''. +If this character is read when there are no characters +on the line, and point is at the beginning of the line, Readline +interprets it as the end of input and returns +.SM +.BR EOF . +.TP +.B delete\-char (C\-d) +Delete the character at point. +If this function is bound to the +same character as the tty \fBEOF\fP character, as \fBC\-d\fP +commonly is, see above for the effects. +.TP +.B backward\-delete\-char (Rubout) +Delete the character behind the cursor. When given a numeric argument, +save the deleted text on the kill ring. +.TP +.B forward\-backward\-delete\-char +Delete the character under the cursor, unless the cursor is at the +end of the line, in which case the character behind the cursor is +deleted. +.TP +.B quoted\-insert (C\-q, C\-v) +Add the next character that you type to the line verbatim. This is +how to insert characters like \fBC\-q\fP, for example. +.TP +.B tab\-insert (M-TAB) +Insert a tab character. +.TP +.B self\-insert (a,\ b,\ A,\ 1,\ !,\ ...) +Insert the character typed. +.TP +.B transpose\-chars (C\-t) +Drag the character before point forward over the character at point, +moving point forward as well. +If point is at the end of the line, then this transposes +the two characters before point. +Negative arguments have no effect. +.TP +.B transpose\-words (M\-t) +Drag the word before point past the word after point, +moving point over that word as well. +If point is at the end of the line, this transposes +the last two words on the line. +.TP +.B upcase\-word (M\-u) +Uppercase the current (or following) word. With a negative argument, +uppercase the previous word, but do not move point. +.TP +.B downcase\-word (M\-l) +Lowercase the current (or following) word. With a negative argument, +lowercase the previous word, but do not move point. +.TP +.B capitalize\-word (M\-c) +Capitalize the current (or following) word. With a negative argument, +capitalize the previous word, but do not move point. +.TP +.B overwrite\-mode +Toggle overwrite mode. With an explicit positive numeric argument, +switches to overwrite mode. With an explicit non-positive numeric +argument, switches to insert mode. This command affects only +\fBemacs\fP mode; \fBvi\fP mode does overwrite differently. +Each call to \fIreadline()\fP starts in insert mode. +In overwrite mode, characters bound to \fBself\-insert\fP replace +the text at point rather than pushing the text to the right. +Characters bound to \fBbackward\-delete\-char\fP replace the character +before point with a space. By default, this command is unbound. +.PD +.SS Killing and Yanking +.PP +.PD 0 +.TP +.B kill\-line (C\-k) +Kill the text from point to the end of the line. +.TP +.B backward\-kill\-line (C\-x Rubout) +Kill backward to the beginning of the line. +.TP +.B unix\-line\-discard (C\-u) +Kill backward from point to the beginning of the line. +The killed text is saved on the kill-ring. +.\" There is no real difference between this and backward-kill-line +.TP +.B kill\-whole\-line +Kill all characters on the current line, no matter where point is. +.TP +.B kill\-word (M\-d) +Kill from point the end of the current word, or if between +words, to the end of the next word. Word boundaries are the same as +those used by \fBforward\-word\fP. +.TP +.B backward\-kill\-word (M\-Rubout) +Kill the word behind point. +Word boundaries are the same as those used by \fBbackward\-word\fP. +.TP +.B unix\-word\-rubout (C\-w) +Kill the word behind point, using white space as a word boundary. +The killed text is saved on the kill-ring. +.TP +.B unix\-filename\-rubout +Kill the word behind point, using white space and the slash character +as the word boundaries. +The killed text is saved on the kill-ring. +.TP +.B delete\-horizontal\-space (M\-\e) +Delete all spaces and tabs around point. +.TP +.B kill\-region +Kill the text between the point and \fImark\fP (saved cursor position). +This text is referred to as the \fIregion\fP. +.TP +.B copy\-region\-as\-kill +Copy the text in the region to the kill buffer. +.TP +.B copy\-backward\-word +Copy the word before point to the kill buffer. +The word boundaries are the same as \fBbackward\-word\fP. +.TP +.B copy\-forward\-word +Copy the word following point to the kill buffer. +The word boundaries are the same as \fBforward\-word\fP. +.TP +.B yank (C\-y) +Yank the top of the kill ring into the buffer at point. +.TP +.B yank\-pop (M\-y) +Rotate the kill ring, and yank the new top. Only works following +.B yank +or +.BR yank\-pop . +.PD +.SS Numeric Arguments +.PP +.PD 0 +.TP +.B digit\-argument (M\-0, M\-1, ..., M\-\-) +Add this digit to the argument already accumulating, or start a new +argument. M\-\- starts a negative argument. +.TP +.B universal\-argument +This is another way to specify an argument. +If this command is followed by one or more digits, optionally with a +leading minus sign, those digits define the argument. +If the command is followed by digits, executing +.B universal\-argument +again ends the numeric argument, but is otherwise ignored. +As a special case, if this command is immediately followed by a +character that is neither a digit or minus sign, the argument count +for the next command is multiplied by four. +The argument count is initially one, so executing this function the +first time makes the argument count four, a second time makes the +argument count sixteen, and so on. +.PD +.SS Completing +.PP +.PD 0 +.TP +.B complete (TAB) +Attempt to perform completion on the text before point. +The actual completion performed is application-specific. +.BR Bash , +for instance, attempts completion treating the text as a variable +(if the text begins with \fB$\fP), username (if the text begins with +\fB~\fP), hostname (if the text begins with \fB@\fP), or +command (including aliases and functions) in turn. If none +of these produces a match, filename completion is attempted. +.BR Gdb , +on the other hand, +allows completion of program functions and variables, and +only attempts filename completion under certain circumstances. +.TP +.B possible\-completions (M\-?) +List the possible completions of the text before point. +When displaying completions, readline sets the number of columns used +for display to the value of \fBcompletion-display-width\fP, the value of +the environment variable +.SM +.BR COLUMNS , +or the screen width, in that order. +.TP +.B insert\-completions (M\-*) +Insert all completions of the text before point +that would have been generated by +\fBpossible\-completions\fP. +.TP +.B menu\-complete +Similar to \fBcomplete\fP, but replaces the word to be completed +with a single match from the list of possible completions. +Repeated execution of \fBmenu\-complete\fP steps through the list +of possible completions, inserting each match in turn. +At the end of the list of completions, the bell is rung +(subject to the setting of \fBbell\-style\fP) +and the original text is restored. +An argument of \fIn\fP moves \fIn\fP positions forward in the list +of matches; a negative argument may be used to move backward +through the list. +This command is intended to be bound to \fBTAB\fP, but is unbound +by default. +.TP +.B menu\-complete\-backward +Identical to \fBmenu\-complete\fP, but moves backward through the list +of possible completions, as if \fBmenu\-complete\fP had been given a +negative argument. This command is unbound by default. +.TP +.B delete\-char\-or\-list +Deletes the character under the cursor if not at the beginning or +end of the line (like \fBdelete-char\fP). +If at the end of the line, behaves identically to +\fBpossible-completions\fP. +.PD +.SS Keyboard Macros +.PP +.PD 0 +.TP +.B start\-kbd\-macro (C\-x (\^) +Begin saving the characters typed into the current keyboard macro. +.TP +.B end\-kbd\-macro (C\-x )\^) +Stop saving the characters typed into the current keyboard macro +and store the definition. +.TP +.B call\-last\-kbd\-macro (C\-x e) +Re-execute the last keyboard macro defined, by making the characters +in the macro appear as if typed at the keyboard. +.TP +.B print\-last\-kbd\-macro () +Print the last keyboard macro defined in a format suitable for the +\fIinputrc\fP file. +.PD +.SS Miscellaneous +.PP +.PD 0 +.TP +.B re\-read\-init\-file (C\-x C\-r) +Read in the contents of the \fIinputrc\fP file, and incorporate +any bindings or variable assignments found there. +.TP +.B abort (C\-g) +Abort the current editing command and +ring the terminal's bell (subject to the setting of +.BR bell\-style ). +.TP +.B do\-lowercase\-version (M\-A, M\-B, M\-\fIx\fP, ...) +If the metafied character \fIx\fP is uppercase, run the command +that is bound to the corresponding metafied lowercase character. +The behavior is undefined if \fIx\fP is already lowercase. +.TP +.B prefix\-meta (ESC) +Metafy the next character typed. +.SM +.B ESC +.B f +is equivalent to +.BR Meta\-f . +.TP +.B undo (C\-_, C\-x C\-u) +Incremental undo, separately remembered for each line. +.TP +.B revert\-line (M\-r) +Undo all changes made to this line. This is like executing the +.B undo +command enough times to return the line to its initial state. +.TP +.B tilde\-expand (M\-&) +Perform tilde expansion on the current word. +.TP +.B set\-mark (C\-@, M\-) +Set the mark to the point. If a +numeric argument is supplied, the mark is set to that position. +.TP +.B exchange\-point\-and\-mark (C\-x C\-x) +Swap the point with the mark. The current cursor position is set to +the saved position, and the old cursor position is saved as the mark. +.TP +.B character\-search (C\-]) +A character is read and point is moved to the next occurrence of that +character. A negative count searches for previous occurrences. +.TP +.B character\-search\-backward (M\-C\-]) +A character is read and point is moved to the previous occurrence of that +character. A negative count searches for subsequent occurrences. +.TP +.B skip\-csi\-sequence +Read enough characters to consume a multi-key sequence such as those +defined for keys like Home and End. Such sequences begin with a +Control Sequence Indicator (CSI), usually ESC\-[. If this sequence is +bound to "\e[", keys producing such sequences will have no effect +unless explicitly bound to a readline command, instead of inserting +stray characters into the editing buffer. This is unbound by default, +but usually bound to ESC\-[. +.TP +.B insert\-comment (M\-#) +Without a numeric argument, the value of the readline +.B comment\-begin +variable is inserted at the beginning of the current line. +If a numeric argument is supplied, this command acts as a toggle: if +the characters at the beginning of the line do not match the value +of \fBcomment\-begin\fP, the value is inserted, otherwise +the characters in \fBcomment-begin\fP are deleted from the beginning of +the line. +In either case, the line is accepted as if a newline had been typed. +The default value of +.B comment\-begin +makes the current line a shell comment. +If a numeric argument causes the comment character to be removed, the line +will be executed by the shell. +.TP +.B dump\-functions +Print all of the functions and their key bindings to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-variables +Print all of the settable variables and their values to the +readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B dump\-macros +Print all of the readline key sequences bound to macros and the +strings they output. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an \fIinputrc\fP file. +.TP +.B emacs\-editing\-mode (C\-e) +When in +.B vi +command mode, this causes a switch to +.B emacs +editing mode. +.TP +.B vi\-editing\-mode (M\-C\-j) +When in +.B emacs +editing mode, this causes a switch to +.B vi +editing mode. +.PD +.SH DEFAULT KEY BINDINGS +.LP +The following is a list of the default emacs and vi bindings. +Characters with the eighth bit set are written as M\-, and +are referred to as +.I metafied +characters. +The printable ASCII characters not mentioned in the list of emacs +standard bindings are bound to the +.B self\-insert +function, which just inserts the given character into the input line. +In vi insertion mode, all characters not specifically mentioned are +bound to +.BR self\-insert . +Characters assigned to signal generation by +.IR stty (1) +or the terminal driver, such as C-Z or C-C, +retain that function. +Upper and lower case metafied characters are bound to the same function in +the emacs mode meta keymap. +The remaining characters are unbound, which causes readline +to ring the bell (subject to the setting of the +.B bell\-style +variable). +.SS Emacs Mode +.RS +.6i +.nf +.ta 2.5i +.sp +Emacs Standard bindings +.sp +"C-@" set-mark +"C-A" beginning-of-line +"C-B" backward-char +"C-D" delete-char +"C-E" end-of-line +"C-F" forward-char +"C-G" abort +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-]" character-search +"C-_" undo +"\^ " to "/" self-insert +"0" to "9" self-insert +":" to "~" self-insert +"C-?" backward-delete-char +.PP +Emacs Meta bindings +.sp +"M-C-G" abort +"M-C-H" backward-kill-word +"M-C-I" tab-insert +"M-C-J" vi-editing-mode +"M-C-M" vi-editing-mode +"M-C-R" revert-line +"M-C-Y" yank-nth-arg +"M-C-[" complete +"M-C-]" character-search-backward +"M-space" set-mark +"M-#" insert-comment +"M-&" tilde-expand +"M-*" insert-completions +"M--" digit-argument +"M-." yank-last-arg +"M-0" digit-argument +"M-1" digit-argument +"M-2" digit-argument +"M-3" digit-argument +"M-4" digit-argument +"M-5" digit-argument +"M-6" digit-argument +"M-7" digit-argument +"M-8" digit-argument +"M-9" digit-argument +"M-<" beginning-of-history +"M-=" possible-completions +"M->" end-of-history +"M-?" possible-completions +"M-B" backward-word +"M-C" capitalize-word +"M-D" kill-word +"M-F" forward-word +"M-L" downcase-word +"M-N" non-incremental-forward-search-history +"M-P" non-incremental-reverse-search-history +"M-R" revert-line +"M-T" transpose-words +"M-U" upcase-word +"M-Y" yank-pop +"M-\e" delete-horizontal-space +"M-~" tilde-expand +"M-C-?" backward-kill-word +"M-_" yank-last-arg +.PP +Emacs Control-X bindings +.sp +"C-XC-G" abort +"C-XC-R" re-read-init-file +"C-XC-U" undo +"C-XC-X" exchange-point-and-mark +"C-X(" start-kbd-macro +"C-X)" end-kbd-macro +"C-XE" call-last-kbd-macro +"C-XC-?" backward-kill-line +.sp +.RE +.SS VI Mode bindings +.RS +.6i +.nf +.ta 2.5i +.sp +.PP +VI Insert Mode functions +.sp +"C-D" vi-eof-maybe +"C-H" backward-delete-char +"C-I" complete +"C-J" accept-line +"C-M" accept-line +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-[" vi-movement-mode +"C-_" undo +"\^ " to "~" self-insert +"C-?" backward-delete-char +.PP +VI Command Mode functions +.sp +"C-D" vi-eof-maybe +"C-E" emacs-editing-mode +"C-G" abort +"C-H" backward-char +"C-J" accept-line +"C-K" kill-line +"C-L" clear-screen +"C-M" accept-line +"C-N" next-history +"C-P" previous-history +"C-Q" quoted-insert +"C-R" reverse-search-history +"C-S" forward-search-history +"C-T" transpose-chars +"C-U" unix-line-discard +"C-V" quoted-insert +"C-W" unix-word-rubout +"C-Y" yank +"C-_" vi-undo +"\^ " forward-char +"#" insert-comment +"$" end-of-line +"%" vi-match +"&" vi-tilde-expand +"*" vi-complete +"+" next-history +"," vi-char-search +"-" previous-history +"." vi-redo +"/" vi-search +"0" beginning-of-line +"1" to "9" vi-arg-digit +";" vi-char-search +"=" vi-complete +"?" vi-search +"A" vi-append-eol +"B" vi-prev-word +"C" vi-change-to +"D" vi-delete-to +"E" vi-end-word +"F" vi-char-search +"G" vi-fetch-history +"I" vi-insert-beg +"N" vi-search-again +"P" vi-put +"R" vi-replace +"S" vi-subst +"T" vi-char-search +"U" revert-line +"W" vi-next-word +"X" backward-delete-char +"Y" vi-yank-to +"\e" vi-complete +"^" vi-first-print +"_" vi-yank-arg +"`" vi-goto-mark +"a" vi-append-mode +"b" vi-prev-word +"c" vi-change-to +"d" vi-delete-to +"e" vi-end-word +"f" vi-char-search +"h" backward-char +"i" vi-insertion-mode +"j" next-history +"k" prev-history +"l" forward-char +"m" vi-set-mark +"n" vi-search-again +"p" vi-put +"r" vi-change-char +"s" vi-subst +"t" vi-char-search +"u" vi-undo +"w" vi-next-word +"x" vi-delete +"y" vi-yank-to +"|" vi-column +"~" vi-change-case +.RE +.SH "SEE ALSO" +.PD 0 +.TP +\fIThe Gnu Readline Library\fP, Brian Fox and Chet Ramey +.TP +\fIThe Gnu History Library\fP, Brian Fox and Chet Ramey +.TP +\fIbash\fP(1) +.PD +.SH FILES +.PD 0 +.TP +.FN ~/.inputrc +Individual \fBreadline\fP initialization file +.PD +.SH AUTHORS +Brian Fox, Free Software Foundation +.br +bfox@gnu.org +.PP +Chet Ramey, Case Western Reserve University +.br +chet.ramey@case.edu +.SH BUG REPORTS +If you find a bug in +.B readline, +you should report it. But first, you should +make sure that it really is a bug, and that it appears in the latest +version of the +.B readline +library that you have. +.PP +Once you have determined that a bug actually exists, mail a +bug report to \fIbug\-readline\fP@\fIgnu.org\fP. +If you have a fix, you are welcome to mail that +as well! Suggestions and `philosophical' bug reports may be mailed +to \fPbug-readline\fP@\fIgnu.org\fP or posted to the Usenet +newsgroup +.BR gnu.bash.bug . +.PP +Comments and bug reports concerning +this manual page should be directed to +.IR chet.ramey@case.edu . +.SH BUGS +.PP +It's too big and too slow. diff --git a/readline/readline/doc/rlman.texi b/readline/readline/doc/rlman.texi new file mode 100644 index 0000000000..737f971ddd --- /dev/null +++ b/readline/readline/doc/rlman.texi @@ -0,0 +1,84 @@ +\input texinfo @c -*-texinfo-*- +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename readline.info +@settitle GNU Readline Library +@include version.texi + +@comment %**end of header (This is for running Texinfo on a region.) +@synindex vr fn + +@copying +This manual describes the GNU Readline Library +(version @value{VERSION}, @value{UPDATED}), a library which aids in the +consistency of user interface across discrete programs which provide +a command line interface. + +Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. +A copy of the license is included in the section entitled +``GNU Free Documentation License''. + +@end quotation +@end copying + +@dircategory Libraries +@direntry +* Readline: (readline). The GNU readline library API. +@end direntry + +@titlepage +@title GNU Readline Library +@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}. +@subtitle @value{UPDATED-MONTH} +@author Chet Ramey, Case Western Reserve University +@author Brian Fox, Free Software Foundation + +@page +@vskip 0pt plus 1filll +@insertcopying + +@end titlepage + +@contents + +@ifnottex +@node Top +@top GNU Readline Library + +This document describes the GNU Readline Library, a utility which aids +in the consistency of user interface across discrete programs which +provide a command line interface. +The Readline home page is @url{http://www.gnu.org/software/readline/}. + +@menu +* Command Line Editing:: GNU Readline User's Manual. +* Programming with GNU Readline:: GNU Readline Programmer's Manual. +* GNU Free Documentation License:: License for copying this manual. +* Concept Index:: Index of concepts described in this manual. +* Function and Variable Index:: Index of externally visible functions + and variables. +@end menu +@end ifnottex + +@include rluser.texi +@include rltech.texi + +@node GNU Free Documentation License +@appendix GNU Free Documentation License + +@include fdl.texi + +@node Concept Index +@unnumbered Concept Index +@printindex cp + +@node Function and Variable Index +@unnumbered Function and Variable Index +@printindex fn + +@bye diff --git a/readline/readline/doc/rltech.texi b/readline/readline/doc/rltech.texi new file mode 100644 index 0000000000..28a02d9960 --- /dev/null +++ b/readline/readline/doc/rltech.texi @@ -0,0 +1,2731 @@ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rltech.info +@comment %**end of header (This is for running Texinfo on a region.) + +@ifinfo +This document describes the GNU Readline Library, a utility for aiding +in the consistency of user interface across discrete programs that need +to provide a command line interface. + +Copyright (C) 1988--2016 Free Software Foundation, Inc. + +Permission is granted to make and distribute verbatim copies of +this manual provided the copyright notice and this permission notice +pare preserved on all copies. + +@ignore +Permission is granted to process this file through TeX and print the +results, provided the printed document carries copying permission +notice identical to this one except for the removal of this paragraph +(this paragraph not being relevant to the printed manual). +@end ignore + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions, +except that this permission notice may be stated in a translation approved +by the Foundation. +@end ifinfo + +@node Programming with GNU Readline +@chapter Programming with GNU Readline + +This chapter describes the interface between the @sc{gnu} Readline Library and +other programs. If you are a programmer, and you wish to include the +features found in @sc{gnu} Readline +such as completion, line editing, and interactive history manipulation +in your own programs, this section is for you. + +@menu +* Basic Behavior:: Using the default behavior of Readline. +* Custom Functions:: Adding your own functions to Readline. +* Readline Variables:: Variables accessible to custom + functions. +* Readline Convenience Functions:: Functions which Readline supplies to + aid in writing your own custom + functions. +* Readline Signal Handling:: How Readline behaves when it receives signals. +* Custom Completers:: Supplanting or supplementing Readline's + completion functions. +@end menu + +@node Basic Behavior +@section Basic Behavior + +Many programs provide a command line interface, such as @code{mail}, +@code{ftp}, and @code{sh}. For such programs, the default behaviour of +Readline is sufficient. This section describes how to use Readline in +the simplest way possible, perhaps to replace calls in your code to +@code{gets()} or @code{fgets()}. + +@findex readline +@cindex readline, function + +The function @code{readline()} prints a prompt @var{prompt} +and then reads and returns a single line of text from the user. +If @var{prompt} is @code{NULL} or the empty string, no prompt is displayed. +The line @code{readline} returns is allocated with @code{malloc()}; +the caller should @code{free()} the line when it has finished with it. +The declaration for @code{readline} in ANSI C is + +@example +@code{char *readline (const char *@var{prompt});} +@end example + +@noindent +So, one might say +@example +@code{char *line = readline ("Enter a line: ");} +@end example +@noindent +in order to read a line of text from the user. +The line returned has the final newline removed, so only the +text remains. + +If @code{readline} encounters an @code{EOF} while reading the line, and the +line is empty at that point, then @code{(char *)NULL} is returned. +Otherwise, the line is ended just as if a newline had been typed. + +Readline performs some expansion on the @var{prompt} before it is +displayed on the screen. See the description of @code{rl_expand_prompt} +(@pxref{Redisplay}) for additional details, especially if @var{prompt} +will contain characters that do not consume physical screen space when +displayed. + +If you want the user to be able to get at the line later, (with +@key{C-p} for example), you must call @code{add_history()} to save the +line away in a @dfn{history} list of such lines. + +@example +@code{add_history (line)}; +@end example + +@noindent +For full details on the GNU History Library, see the associated manual. + +It is preferable to avoid saving empty lines on the history list, since +users rarely have a burning need to reuse a blank line. Here is +a function which usefully replaces the standard @code{gets()} library +function, and has the advantage of no static buffer to overflow: + +@example +/* A static variable for holding the line. */ +static char *line_read = (char *)NULL; + +/* Read a string, and return a pointer to it. + Returns NULL on EOF. */ +char * +rl_gets () +@{ + /* If the buffer has already been allocated, + return the memory to the free pool. */ + if (line_read) + @{ + free (line_read); + line_read = (char *)NULL; + @} + + /* Get a line from the user. */ + line_read = readline (""); + + /* If the line has any text in it, + save it on the history. */ + if (line_read && *line_read) + add_history (line_read); + + return (line_read); +@} +@end example + +This function gives the user the default behaviour of @key{TAB} +completion: completion on file names. If you do not want Readline to +complete on filenames, you can change the binding of the @key{TAB} key +with @code{rl_bind_key()}. + +@example +@code{int rl_bind_key (int @var{key}, rl_command_func_t *@var{function});} +@end example + +@code{rl_bind_key()} takes two arguments: @var{key} is the character that +you want to bind, and @var{function} is the address of the function to +call when @var{key} is pressed. Binding @key{TAB} to @code{rl_insert()} +makes @key{TAB} insert itself. +@code{rl_bind_key()} returns non-zero if @var{key} is not a valid +ASCII character code (between 0 and 255). + +Thus, to disable the default @key{TAB} behavior, the following suffices: +@example +@code{rl_bind_key ('\t', rl_insert);} +@end example + +This code should be executed once at the start of your program; you +might write a function called @code{initialize_readline()} which +performs this and other desired initializations, such as installing +custom completers (@pxref{Custom Completers}). + +@node Custom Functions +@section Custom Functions + +Readline provides many functions for manipulating the text of +the line, but it isn't possible to anticipate the needs of all +programs. This section describes the various functions and variables +defined within the Readline library which allow a user program to add +customized functionality to Readline. + +Before declaring any functions that customize Readline's behavior, or +using any functionality Readline provides in other code, an +application writer should include the file @code{} +in any file that uses Readline's features. Since some of the definitions +in @code{readline.h} use the @code{stdio} library, the file +@code{} should be included before @code{readline.h}. + +@code{readline.h} defines a C preprocessor variable that should +be treated as an integer, @code{RL_READLINE_VERSION}, which may +be used to conditionally compile application code depending on +the installed Readline version. The value is a hexadecimal +encoding of the major and minor version numbers of the library, +of the form 0x@var{MMmm}. @var{MM} is the two-digit major +version number; @var{mm} is the two-digit minor version number. +For Readline 4.2, for example, the value of +@code{RL_READLINE_VERSION} would be @code{0x0402}. + +@menu +* Readline Typedefs:: C declarations to make code readable. +* Function Writing:: Variables and calling conventions. +@end menu + +@node Readline Typedefs +@subsection Readline Typedefs + +For readability, we declare a number of new object types, all pointers +to functions. + +The reason for declaring these new types is to make it easier to write +code describing pointers to C functions with appropriately prototyped +arguments and return values. + +For instance, say we want to declare a variable @var{func} as a pointer +to a function which takes two @code{int} arguments and returns an +@code{int} (this is the type of all of the Readline bindable functions). +Instead of the classic C declaration + +@code{int (*func)();} + +@noindent +or the ANSI-C style declaration + +@code{int (*func)(int, int);} + +@noindent +we may write + +@code{rl_command_func_t *func;} + +The full list of function pointer types available is + +@table @code +@item typedef int rl_command_func_t (int, int); + +@item typedef char *rl_compentry_func_t (const char *, int); + +@item typedef char **rl_completion_func_t (const char *, int, int); + +@item typedef char *rl_quote_func_t (char *, int, char *); + +@item typedef char *rl_dequote_func_t (char *, int); + +@item typedef int rl_compignore_func_t (char **); + +@item typedef void rl_compdisp_func_t (char **, int, int); + +@item typedef int rl_hook_func_t (void); + +@item typedef int rl_getc_func_t (FILE *); + +@item typedef int rl_linebuf_func_t (char *, int); + +@item typedef int rl_intfunc_t (int); +@item #define rl_ivoidfunc_t rl_hook_func_t +@item typedef int rl_icpfunc_t (char *); +@item typedef int rl_icppfunc_t (char **); + +@item typedef void rl_voidfunc_t (void); +@item typedef void rl_vintfunc_t (int); +@item typedef void rl_vcpfunc_t (char *); +@item typedef void rl_vcppfunc_t (char **); + +@end table + +@node Function Writing +@subsection Writing a New Function + +In order to write new functions for Readline, you need to know the +calling conventions for keyboard-invoked functions, and the names of the +variables that describe the current state of the line read so far. + +The calling sequence for a command @code{foo} looks like + +@example +@code{int foo (int count, int key)} +@end example + +@noindent +where @var{count} is the numeric argument (or 1 if defaulted) and +@var{key} is the key that invoked this function. + +It is completely up to the function as to what should be done with the +numeric argument. Some functions use it as a repeat count, some +as a flag, and others to choose alternate behavior (refreshing the current +line as opposed to refreshing the screen, for example). Some choose to +ignore it. In general, if a +function uses the numeric argument as a repeat count, it should be able +to do something useful with both negative and positive arguments. +At the very least, it should be aware that it can be passed a +negative argument. + +A command function should return 0 if its action completes successfully, +and a value greater than zero if some error occurs. +This is the convention obeyed by all of the builtin Readline bindable +command functions. + +@node Readline Variables +@section Readline Variables + +These variables are available to function writers. + +@deftypevar {char *} rl_line_buffer +This is the line gathered so far. You are welcome to modify the +contents of the line, but see @ref{Allowing Undoing}. The +function @code{rl_extend_line_buffer} is available to increase +the memory allocated to @code{rl_line_buffer}. +@end deftypevar + +@deftypevar int rl_point +The offset of the current cursor position in @code{rl_line_buffer} +(the @emph{point}). +@end deftypevar + +@deftypevar int rl_end +The number of characters present in @code{rl_line_buffer}. When +@code{rl_point} is at the end of the line, @code{rl_point} and +@code{rl_end} are equal. +@end deftypevar + +@deftypevar int rl_mark +The @var{mark} (saved position) in the current line. If set, the mark +and point define a @emph{region}. +@end deftypevar + +@deftypevar int rl_done +Setting this to a non-zero value causes Readline to return the current +line immediately. +@end deftypevar + +@deftypevar int rl_num_chars_to_read +Setting this to a positive value before calling @code{readline()} causes +Readline to return after accepting that many characters, rather +than reading up to a character bound to @code{accept-line}. +@end deftypevar + +@deftypevar int rl_pending_input +Setting this to a value makes it the next keystroke read. This is a +way to stuff a single character into the input stream. +@end deftypevar + +@deftypevar int rl_dispatching +Set to a non-zero value if a function is being called from a key binding; +zero otherwise. Application functions can test this to discover whether +they were called directly or by Readline's dispatching mechanism. +@end deftypevar + +@deftypevar int rl_erase_empty_line +Setting this to a non-zero value causes Readline to completely erase +the current line, including any prompt, any time a newline is typed as +the only character on an otherwise-empty line. The cursor is moved to +the beginning of the newly-blank line. +@end deftypevar + +@deftypevar {char *} rl_prompt +The prompt Readline uses. This is set from the argument to +@code{readline()}, and should not be assigned to directly. +The @code{rl_set_prompt()} function (@pxref{Redisplay}) may +be used to modify the prompt string after calling @code{readline()}. +@end deftypevar + +@deftypevar {char *} rl_display_prompt +The string displayed as the prompt. This is usually identical to +@var{rl_prompt}, but may be changed temporarily by functions that +use the prompt string as a message area, such as incremental search. +@end deftypevar + +@deftypevar int rl_already_prompted +If an application wishes to display the prompt itself, rather than have +Readline do it the first time @code{readline()} is called, it should set +this variable to a non-zero value after displaying the prompt. +The prompt must also be passed as the argument to @code{readline()} so +the redisplay functions can update the display properly. +The calling application is responsible for managing the value; Readline +never sets it. +@end deftypevar + +@deftypevar {const char *} rl_library_version +The version number of this revision of the library. +@end deftypevar + +@deftypevar int rl_readline_version +An integer encoding the current version of the library. The encoding is +of the form 0x@var{MMmm}, where @var{MM} is the two-digit major version +number, and @var{mm} is the two-digit minor version number. +For example, for Readline-4.2, @code{rl_readline_version} would have the +value 0x0402. +@end deftypevar + +@deftypevar {int} rl_gnu_readline_p +Always set to 1, denoting that this is @sc{gnu} readline rather than some +emulation. +@end deftypevar + +@deftypevar {const char *} rl_terminal_name +The terminal type, used for initialization. If not set by the application, +Readline sets this to the value of the @env{TERM} environment variable +the first time it is called. +@end deftypevar + +@deftypevar {const char *} rl_readline_name +This variable is set to a unique name by each application using Readline. +The value allows conditional parsing of the inputrc file +(@pxref{Conditional Init Constructs}). +@end deftypevar + +@deftypevar {FILE *} rl_instream +The stdio stream from which Readline reads input. +If @code{NULL}, Readline defaults to @var{stdin}. +@end deftypevar + +@deftypevar {FILE *} rl_outstream +The stdio stream to which Readline performs output. +If @code{NULL}, Readline defaults to @var{stdout}. +@end deftypevar + +@deftypevar int rl_prefer_env_winsize +If non-zero, Readline gives values found in the @env{LINES} and +@env{COLUMNS} environment variables greater precedence than values fetched +from the kernel when computing the screen dimensions. +@end deftypevar + +@deftypevar {rl_command_func_t *} rl_last_func +The address of the last command function Readline executed. May be used to +test whether or not a function is being executed twice in succession, for +example. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_startup_hook +If non-zero, this is the address of a function to call just +before @code{readline} prints the first prompt. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_pre_input_hook +If non-zero, this is the address of a function to call after +the first prompt has been printed and just before @code{readline} +starts reading input characters. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_event_hook +If non-zero, this is the address of a function to call periodically +when Readline is waiting for terminal input. +By default, this will be called at most ten times a second if there +is no keyboard input. +@end deftypevar + +@deftypevar {rl_getc_func_t *} rl_getc_function +If non-zero, Readline will call indirectly through this pointer +to get a character from the input stream. By default, it is set to +@code{rl_getc}, the default Readline character input function +(@pxref{Character Input}). +In general, an application that sets @var{rl_getc_function} should consider +setting @var{rl_input_available_hook} as well. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_signal_event_hook +If non-zero, this is the address of a function to call if a read system +call is interrupted when Readline is reading terminal input. +@end deftypevar + +@deftypevar {rl_hook_func_t *} rl_input_available_hook +If non-zero, Readline will use this function's return value when it needs +to determine whether or not there is available input on the current input +source. +The default hook checks @code{rl_instream}; if an application is using a +different input source, it should set the hook appropriately. +Readline queries for available input when implementing intra-key-sequence +timeouts during input and incremental searches. +This may use an application-specific timeout before returning a value; +Readline uses the value passed to @code{rl_set_keyboard_input_timeout()} +or the value of the user-settable @var{keyseq-timeout} variable. +This is designed for use by applications using Readline's callback interface +(@pxref{Alternate Interface}), which may not use the traditional +@code{read(2)} and file descriptor interface, or other applications using +a different input mechanism. +If an application uses an input mechanism or hook that can potentially exceed +the value of @var{keyseq-timeout}, it should increase the timeout or set +this hook appropriately even when not using the callback interface. +In general, an application that sets @var{rl_getc_function} should consider +setting @var{rl_input_available_hook} as well. +@end deftypevar + +@deftypevar {rl_voidfunc_t *} rl_redisplay_function +If non-zero, Readline will call indirectly through this pointer +to update the display with the current contents of the editing buffer. +By default, it is set to @code{rl_redisplay}, the default Readline +redisplay function (@pxref{Redisplay}). +@end deftypevar + +@deftypevar {rl_vintfunc_t *} rl_prep_term_function +If non-zero, Readline will call indirectly through this pointer +to initialize the terminal. The function takes a single argument, an +@code{int} flag that says whether or not to use eight-bit characters. +By default, this is set to @code{rl_prep_terminal} +(@pxref{Terminal Management}). +@end deftypevar + +@deftypevar {rl_voidfunc_t *} rl_deprep_term_function +If non-zero, Readline will call indirectly through this pointer +to reset the terminal. This function should undo the effects of +@code{rl_prep_term_function}. +By default, this is set to @code{rl_deprep_terminal} +(@pxref{Terminal Management}). +@end deftypevar + +@deftypevar {Keymap} rl_executing_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +currently executing readline function was found. +@end deftypevar + +@deftypevar {Keymap} rl_binding_keymap +This variable is set to the keymap (@pxref{Keymaps}) in which the +last key binding occurred. +@end deftypevar + +@deftypevar {char *} rl_executing_macro +This variable is set to the text of any currently-executing macro. +@end deftypevar + +@deftypevar int rl_executing_key +The key that caused the dispatch to the currently-executing Readline function. +@end deftypevar + +@deftypevar {char *} rl_executing_keyseq +The full key sequence that caused the dispatch to the currently-executing +Readline function. +@end deftypevar + +@deftypevar int rl_key_sequence_length +The number of characters in @var{rl_executing_keyseq}. +@end deftypevar + +@deftypevar {int} rl_readline_state +A variable with bit values that encapsulate the current Readline state. +A bit is set with the @code{RL_SETSTATE} macro, and unset with the +@code{RL_UNSETSTATE} macro. Use the @code{RL_ISSTATE} macro to test +whether a particular state bit is set. Current state bits include: + +@table @code +@item RL_STATE_NONE +Readline has not yet been called, nor has it begun to initialize. +@item RL_STATE_INITIALIZING +Readline is initializing its internal data structures. +@item RL_STATE_INITIALIZED +Readline has completed its initialization. +@item RL_STATE_TERMPREPPED +Readline has modified the terminal modes to do its own input and redisplay. +@item RL_STATE_READCMD +Readline is reading a command from the keyboard. +@item RL_STATE_METANEXT +Readline is reading more input after reading the meta-prefix character. +@item RL_STATE_DISPATCHING +Readline is dispatching to a command. +@item RL_STATE_MOREINPUT +Readline is reading more input while executing an editing command. +@item RL_STATE_ISEARCH +Readline is performing an incremental history search. +@item RL_STATE_NSEARCH +Readline is performing a non-incremental history search. +@item RL_STATE_SEARCH +Readline is searching backward or forward through the history for a string. +@item RL_STATE_NUMERICARG +Readline is reading a numeric argument. +@item RL_STATE_MACROINPUT +Readline is currently getting its input from a previously-defined keyboard +macro. +@item RL_STATE_MACRODEF +Readline is currently reading characters defining a keyboard macro. +@item RL_STATE_OVERWRITE +Readline is in overwrite mode. +@item RL_STATE_COMPLETING +Readline is performing word completion. +@item RL_STATE_SIGHANDLER +Readline is currently executing the readline signal handler. +@item RL_STATE_UNDOING +Readline is performing an undo. +@item RL_STATE_INPUTPENDING +Readline has input pending due to a call to @code{rl_execute_next()}. +@item RL_STATE_TTYCSAVED +Readline has saved the values of the terminal's special characters. +@item RL_STATE_CALLBACK +Readline is currently using the alternate (callback) interface +(@pxref{Alternate Interface}). +@item RL_STATE_VIMOTION +Readline is reading the argument to a vi-mode "motion" command. +@item RL_STATE_MULTIKEY +Readline is reading a multiple-keystroke command. +@item RL_STATE_VICMDONCE +Readline has entered vi command (movement) mode at least one time during +the current call to @code{readline()}. +@item RL_STATE_DONE +Readline has read a key sequence bound to @code{accept-line} +and is about to return the line to the caller. +@end table + +@end deftypevar + +@deftypevar {int} rl_explicit_arg +Set to a non-zero value if an explicit numeric argument was specified by +the user. Only valid in a bindable command function. +@end deftypevar + +@deftypevar {int} rl_numeric_arg +Set to the value of any numeric argument explicitly specified by the user +before executing the current Readline function. Only valid in a bindable +command function. +@end deftypevar + +@deftypevar {int} rl_editing_mode +Set to a value denoting Readline's current editing mode. A value of +@var{1} means Readline is currently in emacs mode; @var{0} +means that vi mode is active. +@end deftypevar + + +@node Readline Convenience Functions +@section Readline Convenience Functions + +@menu +* Function Naming:: How to give a function you write a name. +* Keymaps:: Making keymaps. +* Binding Keys:: Changing Keymaps. +* Associating Function Names and Bindings:: Translate function names to + key sequences. +* Allowing Undoing:: How to make your functions undoable. +* Redisplay:: Functions to control line display. +* Modifying Text:: Functions to modify @code{rl_line_buffer}. +* Character Input:: Functions to read keyboard input. +* Terminal Management:: Functions to manage terminal settings. +* Utility Functions:: Generally useful functions and hooks. +* Miscellaneous Functions:: Functions that don't fall into any category. +* Alternate Interface:: Using Readline in a `callback' fashion. +* A Readline Example:: An example Readline function. +* Alternate Interface Example:: An example program using the alternate interface. +@end menu + +@node Function Naming +@subsection Naming a Function + +The user can dynamically change the bindings of keys while using +Readline. This is done by representing the function with a descriptive +name. The user is able to type the descriptive name when referring to +the function. Thus, in an init file, one might find + +@example +Meta-Rubout: backward-kill-word +@end example + +This binds the keystroke @key{Meta-Rubout} to the function +@emph{descriptively} named @code{backward-kill-word}. You, as the +programmer, should bind the functions you write to descriptive names as +well. Readline provides a function for doing that: + +@deftypefun int rl_add_defun (const char *name, rl_command_func_t *function, int key) +Add @var{name} to the list of named functions. Make @var{function} be +the function that gets called. If @var{key} is not -1, then bind it to +@var{function} using @code{rl_bind_key()}. +@end deftypefun + +Using this function alone is sufficient for most applications. +It is the recommended way to add a few functions to the default +functions that Readline has built in. +If you need to do something other than adding a function to Readline, +you may need to use the underlying functions described below. + +@node Keymaps +@subsection Selecting a Keymap + +Key bindings take place on a @dfn{keymap}. The keymap is the +association between the keys that the user types and the functions that +get run. You can make your own keymaps, copy existing keymaps, and tell +Readline which keymap to use. + +@deftypefun Keymap rl_make_bare_keymap (void) +Returns a new, empty keymap. The space for the keymap is allocated with +@code{malloc()}; the caller should free it by calling +@code{rl_free_keymap()} when done. +@end deftypefun + +@deftypefun Keymap rl_copy_keymap (Keymap map) +Return a new keymap which is a copy of @var{map}. +@end deftypefun + +@deftypefun Keymap rl_make_keymap (void) +Return a new keymap with the printing characters bound to rl_insert, +the lowercase Meta characters bound to run their equivalents, and +the Meta digits bound to produce numeric arguments. +@end deftypefun + +@deftypefun void rl_discard_keymap (Keymap keymap) +Free the storage associated with the data in @var{keymap}. +The caller should free @var{keymap}. +@end deftypefun + +@deftypefun void rl_free_keymap (Keymap keymap) +Free all storage associated with @var{keymap}. This calls +@code{rl_discard_keymap} to free subordindate keymaps and macros. +@end deftypefun + +@deftypefun int rl_empty_keymap (Keymap keymap) +Return non-zero if there are no keys bound to functions in @var{keymap}; +zero if there are any keys bound. +@end deftypefun + +Readline has several internal keymaps. These functions allow you to +change which keymap is active. + +@deftypefun Keymap rl_get_keymap (void) +Returns the currently active keymap. +@end deftypefun + +@deftypefun void rl_set_keymap (Keymap keymap) +Makes @var{keymap} the currently active keymap. +@end deftypefun + +@deftypefun Keymap rl_get_keymap_by_name (const char *name) +Return the keymap matching @var{name}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@deftypefun {char *} rl_get_keymap_name (Keymap keymap) +Return the name matching @var{keymap}. @var{name} is one which would +be supplied in a @code{set keymap} inputrc line (@pxref{Readline Init File}). +@end deftypefun + +@deftypefun int rl_set_keymap_name (const char *name, Keymap keymap) +Set the name of @var{keymap}. This name will then be "registered" and +available for use in a @code{set keymap} inputrc directive +@pxref{Readline Init File}). +The @var{name} may not be one of Readline's builtin keymap names; +you may not add a different name for one of Readline's builtin keymaps. +You may replace the name associated with a given keymap by calling this +function more than once with the same @var{keymap} argument. +You may associate a registered @var{name} with a new keymap by calling this +function more than once with the same @var{name} argument. +There is no way to remove a named keymap once the name has been +registered. +Readline will make a copy of @var{name}. +The return value is greater than zero unless @var{name} is one of +Readline's builtin keymap names or @var{keymap} is one of Readline's +builtin keymaps. +@end deftypefun + +@node Binding Keys +@subsection Binding Keys + +Key sequences are associate with functions through the keymap. +Readline has several internal keymaps: @code{emacs_standard_keymap}, +@code{emacs_meta_keymap}, @code{emacs_ctlx_keymap}, +@code{vi_movement_keymap}, and @code{vi_insertion_keymap}. +@code{emacs_standard_keymap} is the default, and the examples in +this manual assume that. + +Since @code{readline()} installs a set of default key bindings the first +time it is called, there is always the danger that a custom binding +installed before the first call to @code{readline()} will be overridden. +An alternate mechanism is to install custom key bindings in an +initialization function assigned to the @code{rl_startup_hook} variable +(@pxref{Readline Variables}). + +These functions manage key bindings. + +@deftypefun int rl_bind_key (int key, rl_command_func_t *function) +Binds @var{key} to @var{function} in the currently active keymap. +Returns non-zero in the case of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_bind_key_in_map (int key, rl_command_func_t *function, Keymap map) +Bind @var{key} to @var{function} in @var{map}. +Returns non-zero in the case of an invalid @var{key}. +@end deftypefun + +@deftypefun int rl_bind_key_if_unbound (int key, rl_command_func_t *function) +Binds @var{key} to @var{function} if it is not already bound in the +currently active keymap. +Returns non-zero in the case of an invalid @var{key} or if @var{key} is +already bound. +@end deftypefun + +@deftypefun int rl_bind_key_if_unbound_in_map (int key, rl_command_func_t *function, Keymap map) +Binds @var{key} to @var{function} if it is not already bound in @var{map}. +Returns non-zero in the case of an invalid @var{key} or if @var{key} is +already bound. +@end deftypefun + +@deftypefun int rl_unbind_key (int key) +Bind @var{key} to the null function in the currently active keymap. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_key_in_map (int key, Keymap map) +Bind @var{key} to the null function in @var{map}. +Returns non-zero in case of error. +@end deftypefun + +@deftypefun int rl_unbind_function_in_map (rl_command_func_t *function, Keymap map) +Unbind all keys that execute @var{function} in @var{map}. +@end deftypefun + +@deftypefun int rl_unbind_command_in_map (const char *command, Keymap map) +Unbind all keys that are bound to @var{command} in @var{map}. +@end deftypefun + +@deftypefun int rl_bind_keyseq (const char *keyseq, rl_command_func_t *function) +Bind the key sequence represented by the string @var{keyseq} to the function +@var{function}, beginning in the current keymap. +This makes new keymaps as necessary. +The return value is non-zero if @var{keyseq} is invalid. +@end deftypefun + +@deftypefun int rl_bind_keyseq_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) +Bind the key sequence represented by the string @var{keyseq} to the function +@var{function}. This makes new keymaps as necessary. +Initial bindings are performed in @var{map}. +The return value is non-zero if @var{keyseq} is invalid. +@end deftypefun + +@deftypefun int rl_set_key (const char *keyseq, rl_command_func_t *function, Keymap map) +Equivalent to @code{rl_bind_keyseq_in_map}. +@end deftypefun + +@deftypefun int rl_bind_keyseq_if_unbound (const char *keyseq, rl_command_func_t *function) +Binds @var{keyseq} to @var{function} if it is not already bound in the +currently active keymap. +Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is +already bound. +@end deftypefun + +@deftypefun int rl_bind_keyseq_if_unbound_in_map (const char *keyseq, rl_command_func_t *function, Keymap map) +Binds @var{keyseq} to @var{function} if it is not already bound in @var{map}. +Returns non-zero in the case of an invalid @var{keyseq} or if @var{keyseq} is +already bound. +@end deftypefun + +@deftypefun int rl_generic_bind (int type, const char *keyseq, char *data, Keymap map) +Bind the key sequence represented by the string @var{keyseq} to the arbitrary +pointer @var{data}. @var{type} says what kind of data is pointed to by +@var{data}; this can be a function (@code{ISFUNC}), a macro +(@code{ISMACR}), or a keymap (@code{ISKMAP}). This makes new keymaps as +necessary. The initial keymap in which to do bindings is @var{map}. +@end deftypefun + +@deftypefun int rl_parse_and_bind (char *line) +Parse @var{line} as if it had been read from the @code{inputrc} file and +perform any key bindings and variable assignments found +(@pxref{Readline Init File}). +@end deftypefun + +@deftypefun int rl_read_init_file (const char *filename) +Read keybindings and variable assignments from @var{filename} +(@pxref{Readline Init File}). +@end deftypefun + +@node Associating Function Names and Bindings +@subsection Associating Function Names and Bindings + +These functions allow you to find out what keys invoke named functions +and the functions invoked by a particular key sequence. You may also +associate a new function name with an arbitrary function. + +@deftypefun {rl_command_func_t *} rl_named_function (const char *name) +Return the function with name @var{name}. +@end deftypefun + +@deftypefun {rl_command_func_t *} rl_function_of_keyseq (const char *keyseq, Keymap map, int *type) +Return the function invoked by @var{keyseq} in keymap @var{map}. +If @var{map} is @code{NULL}, the current keymap is used. If @var{type} is +not @code{NULL}, the type of the object is returned in the @code{int} variable +it points to (one of @code{ISFUNC}, @code{ISKMAP}, or @code{ISMACR}). +It takes a "translated" key sequence and should not be used if the key sequence +can include NUL. +@end deftypefun + +@deftypefun {rl_command_func_t *} rl_function_of_keyseq_len (const char *keyseq, size_t len, Keymap map, int *type) +Return the function invoked by @var{keyseq} of length @var{len} +in keymap @var{map}. Equivalent to @code{rl_function_of_keyseq} with the +addition of the @var{len} parameter. +It takes a "translated" key sequence and should be used if the key sequence +can include NUL. +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs (rl_command_func_t *function) +Return an array of strings representing the key sequences used to +invoke @var{function} in the current keymap. +@end deftypefun + +@deftypefun {char **} rl_invoking_keyseqs_in_map (rl_command_func_t *function, Keymap map) +Return an array of strings representing the key sequences used to +invoke @var{function} in the keymap @var{map}. +@end deftypefun + +@deftypefun void rl_function_dumper (int readable) +Print the readline function names and the key sequences currently +bound to them to @code{rl_outstream}. If @var{readable} is non-zero, +the list is formatted in such a way that it can be made part of an +@code{inputrc} file and re-read. +@end deftypefun + +@deftypefun void rl_list_funmap_names (void) +Print the names of all bindable Readline functions to @code{rl_outstream}. +@end deftypefun + +@deftypefun {const char **} rl_funmap_names (void) +Return a NULL terminated array of known function names. The array is +sorted. The array itself is allocated, but not the strings inside. You +should free the array, but not the pointers, using @code{free} or +@code{rl_free} when you are done. +@end deftypefun + +@deftypefun int rl_add_funmap_entry (const char *name, rl_command_func_t *function) +Add @var{name} to the list of bindable Readline command names, and make +@var{function} the function to be called when @var{name} is invoked. +@end deftypefun + +@node Allowing Undoing +@subsection Allowing Undoing + +Supporting the undo command is a painless thing, and makes your +functions much more useful. It is certainly easy to try +something if you know you can undo it. + +If your function simply inserts text once, or deletes text once, and +uses @code{rl_insert_text()} or @code{rl_delete_text()} to do it, then +undoing is already done for you automatically. + +If you do multiple insertions or multiple deletions, or any combination +of these operations, you should group them together into one operation. +This is done with @code{rl_begin_undo_group()} and +@code{rl_end_undo_group()}. + +The types of events that can be undone are: + +@smallexample +enum undo_code @{ UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END @}; +@end smallexample + +Notice that @code{UNDO_DELETE} means to insert some text, and +@code{UNDO_INSERT} means to delete some text. That is, the undo code +tells what to undo, not how to undo it. @code{UNDO_BEGIN} and +@code{UNDO_END} are tags added by @code{rl_begin_undo_group()} and +@code{rl_end_undo_group()}. + +@deftypefun int rl_begin_undo_group (void) +Begins saving undo information in a group construct. The undo +information usually comes from calls to @code{rl_insert_text()} and +@code{rl_delete_text()}, but could be the result of calls to +@code{rl_add_undo()}. +@end deftypefun + +@deftypefun int rl_end_undo_group (void) +Closes the current undo group started with @code{rl_begin_undo_group +()}. There should be one call to @code{rl_end_undo_group()} +for each call to @code{rl_begin_undo_group()}. +@end deftypefun + +@deftypefun void rl_add_undo (enum undo_code what, int start, int end, char *text) +Remember how to undo an event (according to @var{what}). The affected +text runs from @var{start} to @var{end}, and encompasses @var{text}. +@end deftypefun + +@deftypefun void rl_free_undo_list (void) +Free the existing undo list. +@end deftypefun + +@deftypefun int rl_do_undo (void) +Undo the first thing on the undo list. Returns @code{0} if there was +nothing to undo, non-zero if something was undone. +@end deftypefun + +Finally, if you neither insert nor delete text, but directly modify the +existing text (e.g., change its case), call @code{rl_modifying()} +once, just before you modify the text. You must supply the indices of +the text range that you are going to modify. + +@deftypefun int rl_modifying (int start, int end) +Tell Readline to save the text between @var{start} and @var{end} as a +single undo unit. It is assumed that you will subsequently modify +that text. +@end deftypefun + +@node Redisplay +@subsection Redisplay + +@deftypefun void rl_redisplay (void) +Change what's displayed on the screen to reflect the current contents +of @code{rl_line_buffer}. +@end deftypefun + +@deftypefun int rl_forced_update_display (void) +Force the line to be updated and redisplayed, whether or not +Readline thinks the screen display is correct. +@end deftypefun + +@deftypefun int rl_on_new_line (void) +Tell the update functions that we have moved onto a new (empty) line, +usually after outputting a newline. +@end deftypefun + +@deftypefun int rl_on_new_line_with_prompt (void) +Tell the update functions that we have moved onto a new line, with +@var{rl_prompt} already displayed. +This could be used by applications that want to output the prompt string +themselves, but still need Readline to know the prompt string length for +redisplay. +It should be used after setting @var{rl_already_prompted}. +@end deftypefun + +@deftypefun int rl_clear_visible_line (void) +Clear the screen lines corresponding to the current line's contents. +@end deftypefun + +@deftypefun int rl_reset_line_state (void) +Reset the display state to a clean state and redisplay the current line +starting on a new line. +@end deftypefun + +@deftypefun int rl_crlf (void) +Move the cursor to the start of the next screen line. +@end deftypefun + +@deftypefun int rl_show_char (int c) +Display character @var{c} on @code{rl_outstream}. +If Readline has not been set to display meta characters directly, this +will convert meta characters to a meta-prefixed key sequence. +This is intended for use by applications which wish to do their own +redisplay. +@end deftypefun + +@deftypefun int rl_message (const char *, @dots{}) +The arguments are a format string as would be supplied to @code{printf}, +possibly containing conversion specifications such as @samp{%d}, and +any additional arguments necessary to satisfy the conversion specifications. +The resulting string is displayed in the @dfn{echo area}. The echo area +is also used to display numeric arguments and search strings. +You should call @code{rl_save_prompt} to save the prompt information +before calling this function. +@end deftypefun + +@deftypefun int rl_clear_message (void) +Clear the message in the echo area. If the prompt was saved with a call to +@code{rl_save_prompt} before the last call to @code{rl_message}, +call @code{rl_restore_prompt} before calling this function. +@end deftypefun + +@deftypefun void rl_save_prompt (void) +Save the local Readline prompt display state in preparation for +displaying a new message in the message area with @code{rl_message()}. +@end deftypefun + +@deftypefun void rl_restore_prompt (void) +Restore the local Readline prompt display state saved by the most +recent call to @code{rl_save_prompt}. +if @code{rl_save_prompt} was called to save the prompt before a call +to @code{rl_message}, this function should be called before the +corresponding call to @code{rl_clear_message}. +@end deftypefun + +@deftypefun int rl_expand_prompt (char *prompt) +Expand any special character sequences in @var{prompt} and set up the +local Readline prompt redisplay variables. +This function is called by @code{readline()}. It may also be called to +expand the primary prompt if the @code{rl_on_new_line_with_prompt()} +function or @code{rl_already_prompted} variable is used. +It returns the number of visible characters on the last line of the +(possibly multi-line) prompt. +Applications may indicate that the prompt contains characters that take +up no physical screen space when displayed by bracketing a sequence of +such characters with the special markers @code{RL_PROMPT_START_IGNORE} +and @code{RL_PROMPT_END_IGNORE} (declared in @file{readline.h}). This may +be used to embed terminal-specific escape sequences in prompts. +@end deftypefun + +@deftypefun int rl_set_prompt (const char *prompt) +Make Readline use @var{prompt} for subsequent redisplay. This calls +@code{rl_expand_prompt()} to expand the prompt and sets @code{rl_prompt} +to the result. +@end deftypefun + +@node Modifying Text +@subsection Modifying Text + +@deftypefun int rl_insert_text (const char *text) +Insert @var{text} into the line at the current cursor position. +Returns the number of characters inserted. +@end deftypefun + +@deftypefun int rl_delete_text (int start, int end) +Delete the text between @var{start} and @var{end} in the current line. +Returns the number of characters deleted. +@end deftypefun + +@deftypefun {char *} rl_copy_text (int start, int end) +Return a copy of the text between @var{start} and @var{end} in +the current line. +@end deftypefun + +@deftypefun int rl_kill_text (int start, int end) +Copy the text between @var{start} and @var{end} in the current line +to the kill ring, appending or prepending to the last kill if the +last command was a kill command. The text is deleted. +If @var{start} is less than @var{end}, +the text is appended, otherwise prepended. If the last command was +not a kill, a new kill ring slot is used. +@end deftypefun + +@deftypefun int rl_push_macro_input (char *macro) +Cause @var{macro} to be inserted into the line, as if it had been invoked +by a key bound to a macro. Not especially useful; use +@code{rl_insert_text()} instead. +@end deftypefun + +@node Character Input +@subsection Character Input + +@deftypefun int rl_read_key (void) +Return the next character available from Readline's current input stream. +This handles input inserted into +the input stream via @var{rl_pending_input} (@pxref{Readline Variables}) +and @code{rl_stuff_char()}, macros, and characters read from the keyboard. +While waiting for input, this function will call any function assigned to +the @code{rl_event_hook} variable. +@end deftypefun + +@deftypefun int rl_getc (FILE *stream) +Return the next character available from @var{stream}, which is assumed to +be the keyboard. +@end deftypefun + +@deftypefun int rl_stuff_char (int c) +Insert @var{c} into the Readline input stream. It will be "read" +before Readline attempts to read characters from the terminal with +@code{rl_read_key()}. Up to 512 characters may be pushed back. +@code{rl_stuff_char} returns 1 if the character was successfully inserted; +0 otherwise. +@end deftypefun + +@deftypefun int rl_execute_next (int c) +Make @var{c} be the next command to be executed when @code{rl_read_key()} +is called. This sets @var{rl_pending_input}. +@end deftypefun + +@deftypefun int rl_clear_pending_input (void) +Unset @var{rl_pending_input}, effectively negating the effect of any +previous call to @code{rl_execute_next()}. This works only if the +pending input has not already been read with @code{rl_read_key()}. +@end deftypefun + +@deftypefun int rl_set_keyboard_input_timeout (int u) +While waiting for keyboard input in @code{rl_read_key()}, Readline will +wait for @var{u} microseconds for input before calling any function +assigned to @code{rl_event_hook}. @var{u} must be greater than or equal +to zero (a zero-length timeout is equivalent to a poll). +The default waiting period is one-tenth of a second. +Returns the old timeout value. +@end deftypefun + +@node Terminal Management +@subsection Terminal Management + +@deftypefun void rl_prep_terminal (int meta_flag) +Modify the terminal settings for Readline's use, so @code{readline()} +can read a single character at a time from the keyboard. +The @var{meta_flag} argument should be non-zero if Readline should +read eight-bit input. +@end deftypefun + +@deftypefun void rl_deprep_terminal (void) +Undo the effects of @code{rl_prep_terminal()}, leaving the terminal in +the state in which it was before the most recent call to +@code{rl_prep_terminal()}. +@end deftypefun + +@deftypefun void rl_tty_set_default_bindings (Keymap kmap) +Read the operating system's terminal editing characters (as would be +displayed by @code{stty}) to their Readline equivalents. +The bindings are performed in @var{kmap}. +@end deftypefun + +@deftypefun void rl_tty_unset_default_bindings (Keymap kmap) +Reset the bindings manipulated by @code{rl_tty_set_default_bindings} so +that the terminal editing characters are bound to @code{rl_insert}. +The bindings are performed in @var{kmap}. +@end deftypefun + +@deftypefun int rl_tty_set_echoing (int value) +Set Readline's idea of whether or not it is echoing output to its output +stream (@var{rl_outstream}). If @var{value} is 0, Readline does not display +output to @var{rl_outstream}; any other value enables output. The initial +value is set when Readline initializes the terminal settings. +This function returns the previous value. +@end deftypefun + +@deftypefun int rl_reset_terminal (const char *terminal_name) +Reinitialize Readline's idea of the terminal settings using +@var{terminal_name} as the terminal type (e.g., @code{vt100}). +If @var{terminal_name} is @code{NULL}, the value of the @code{TERM} +environment variable is used. +@end deftypefun + +@node Utility Functions +@subsection Utility Functions + +@deftypefun int rl_save_state (struct readline_state *sp) +Save a snapshot of Readline's internal state to @var{sp}. +The contents of the @var{readline_state} structure are documented +in @file{readline.h}. +The caller is responsible for allocating the structure. +@end deftypefun + +@deftypefun int rl_restore_state (struct readline_state *sp) +Restore Readline's internal state to that stored in @var{sp}, which must +have been saved by a call to @code{rl_save_state}. +The contents of the @var{readline_state} structure are documented +in @file{readline.h}. +The caller is responsible for freeing the structure. +@end deftypefun + +@deftypefun void rl_free (void *mem) +Deallocate the memory pointed to by @var{mem}. @var{mem} must have been +allocated by @code{malloc}. +@end deftypefun + +@deftypefun void rl_replace_line (const char *text, int clear_undo) +Replace the contents of @code{rl_line_buffer} with @var{text}. +The point and mark are preserved, if possible. +If @var{clear_undo} is non-zero, the undo list associated with the +current line is cleared. +@end deftypefun + +@deftypefun void rl_extend_line_buffer (int len) +Ensure that @code{rl_line_buffer} has enough space to hold @var{len} +characters, possibly reallocating it if necessary. +@end deftypefun + +@deftypefun int rl_initialize (void) +Initialize or re-initialize Readline's internal state. +It's not strictly necessary to call this; @code{readline()} calls it before +reading any input. +@end deftypefun + +@deftypefun int rl_ding (void) +Ring the terminal bell, obeying the setting of @code{bell-style}. +@end deftypefun + +@deftypefun int rl_alphabetic (int c) +Return 1 if @var{c} is an alphabetic character. +@end deftypefun + +@deftypefun void rl_display_match_list (char **matches, int len, int max) +A convenience function for displaying a list of strings in +columnar format on Readline's output stream. @code{matches} is the list +of strings, in argv format, such as a list of completion matches. +@code{len} is the number of strings in @code{matches}, and @code{max} +is the length of the longest string in @code{matches}. This function uses +the setting of @code{print-completions-horizontally} to select how the +matches are displayed (@pxref{Readline Init File Syntax}). +When displaying completions, this function sets the number of columns used +for display to the value of @code{completion-display-width}, the value of +the environment variable @env{COLUMNS}, or the screen width, in that order. +@end deftypefun + +The following are implemented as macros, defined in @code{chardefs.h}. +Applications should refrain from using them. + +@deftypefun int _rl_uppercase_p (int c) +Return 1 if @var{c} is an uppercase alphabetic character. +@end deftypefun + +@deftypefun int _rl_lowercase_p (int c) +Return 1 if @var{c} is a lowercase alphabetic character. +@end deftypefun + +@deftypefun int _rl_digit_p (int c) +Return 1 if @var{c} is a numeric character. +@end deftypefun + +@deftypefun int _rl_to_upper (int c) +If @var{c} is a lowercase alphabetic character, return the corresponding +uppercase character. +@end deftypefun + +@deftypefun int _rl_to_lower (int c) +If @var{c} is an uppercase alphabetic character, return the corresponding +lowercase character. +@end deftypefun + +@deftypefun int _rl_digit_value (int c) +If @var{c} is a number, return the value it represents. +@end deftypefun + +@node Miscellaneous Functions +@subsection Miscellaneous Functions + +@deftypefun int rl_macro_bind (const char *keyseq, const char *macro, Keymap map) +Bind the key sequence @var{keyseq} to invoke the macro @var{macro}. +The binding is performed in @var{map}. When @var{keyseq} is invoked, the +@var{macro} will be inserted into the line. This function is deprecated; +use @code{rl_generic_bind()} instead. +@end deftypefun + +@deftypefun void rl_macro_dumper (int readable) +Print the key sequences bound to macros and their values, using +the current keymap, to @code{rl_outstream}. +If @var{readable} is non-zero, the list is formatted in such a way +that it can be made part of an @code{inputrc} file and re-read. +@end deftypefun + +@deftypefun int rl_variable_bind (const char *variable, const char *value) +Make the Readline variable @var{variable} have @var{value}. +This behaves as if the readline command +@samp{set @var{variable} @var{value}} had been executed in an @code{inputrc} +file (@pxref{Readline Init File Syntax}). +@end deftypefun + +@deftypefun {char *} rl_variable_value (const char *variable) +Return a string representing the value of the Readline variable @var{variable}. +For boolean variables, this string is either @samp{on} or @samp{off}. +@end deftypefun + +@deftypefun void rl_variable_dumper (int readable) +Print the readline variable names and their current values +to @code{rl_outstream}. +If @var{readable} is non-zero, the list is formatted in such a way +that it can be made part of an @code{inputrc} file and re-read. +@end deftypefun + +@deftypefun int rl_set_paren_blink_timeout (int u) +Set the time interval (in microseconds) that Readline waits when showing +a balancing character when @code{blink-matching-paren} has been enabled. +@end deftypefun + +@deftypefun {char *} rl_get_termcap (const char *cap) +Retrieve the string value of the termcap capability @var{cap}. +Readline fetches the termcap entry for the current terminal name and +uses those capabilities to move around the screen line and perform other +terminal-specific operations, like erasing a line. Readline does not +use all of a terminal's capabilities, and this function will return +values for only those capabilities Readline uses. +@end deftypefun + +@deftypefun {void} rl_clear_history (void) +Clear the history list by deleting all of the entries, in the same manner +as the History library's @code{clear_history()} function. +This differs from @code{clear_history} because it frees private data +Readline saves in the history list. +@end deftypefun + +@node Alternate Interface +@subsection Alternate Interface + +An alternate interface is available to plain @code{readline()}. Some +applications need to interleave keyboard I/O with file, device, or +window system I/O, typically by using a main loop to @code{select()} +on various file descriptors. To accommodate this need, readline can +also be invoked as a `callback' function from an event loop. There +are functions available to make this easy. + +@deftypefun void rl_callback_handler_install (const char *prompt, rl_vcpfunc_t *lhandler) +Set up the terminal for readline I/O and display the initial +expanded value of @var{prompt}. Save the value of @var{lhandler} to +use as a handler function to call when a complete line of input has been +entered. +The handler function receives the text of the line as an argument. +As with @code{readline()}, the handler function should @code{free} the +line when it it finished with it. +@end deftypefun + +@deftypefun void rl_callback_read_char (void) +Whenever an application determines that keyboard input is available, it +should call @code{rl_callback_read_char()}, which will read the next +character from the current input source. +If that character completes the line, @code{rl_callback_read_char} will +invoke the @var{lhandler} function installed by +@code{rl_callback_handler_install} to process the line. +Before calling the @var{lhandler} function, the terminal settings are +reset to the values they had before calling +@code{rl_callback_handler_install}. +If the @var{lhandler} function returns, +and the line handler remains installed, +the terminal settings are modified for Readline's use again. +@code{EOF} is indicated by calling @var{lhandler} with a +@code{NULL} line. +@end deftypefun + +@deftypefun void rl_callback_sigcleanup (void) +Clean up any internal state the callback interface uses to maintain state +between calls to rl_callback_read_char (e.g., the state of any active +incremental searches). This is intended to be used by applications that +wish to perform their own signal handling; Readline's internal signal handler +calls this when appropriate. +@end deftypefun + +@deftypefun void rl_callback_handler_remove (void) +Restore the terminal to its initial state and remove the line handler. +You may call this function from within a callback as well as independently. +If the @var{lhandler} installed by @code{rl_callback_handler_install} +does not exit the program, either this function or the function referred +to by the value of @code{rl_deprep_term_function} should be called before +the program exits to reset the terminal settings. +@end deftypefun + +@node A Readline Example +@subsection A Readline Example + +Here is a function which changes lowercase characters to their uppercase +equivalents, and uppercase characters to lowercase. If +this function was bound to @samp{M-c}, then typing @samp{M-c} would +change the case of the character under point. Typing @samp{M-1 0 M-c} +would change the case of the following 10 characters, leaving the cursor on +the last character changed. + +@example +/* Invert the case of the COUNT following characters. */ +int +invert_case_line (count, key) + int count, key; +@{ + register int start, end, i; + + start = rl_point; + + if (rl_point >= rl_end) + return (0); + + if (count < 0) + @{ + direction = -1; + count = -count; + @} + else + direction = 1; + + /* Find the end of the range to modify. */ + end = start + (count * direction); + + /* Force it to be within range. */ + if (end > rl_end) + end = rl_end; + else if (end < 0) + end = 0; + + if (start == end) + return (0); + + if (start > end) + @{ + int temp = start; + start = end; + end = temp; + @} + + /* Tell readline that we are modifying the line, + so it will save the undo information. */ + rl_modifying (start, end); + + for (i = start; i != end; i++) + @{ + if (_rl_uppercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = _rl_to_lower (rl_line_buffer[i]); + else if (_rl_lowercase_p (rl_line_buffer[i])) + rl_line_buffer[i] = _rl_to_upper (rl_line_buffer[i]); + @} + /* Move point to on top of the last character changed. */ + rl_point = (direction == 1) ? end - 1 : start; + return (0); +@} +@end example + +@node Alternate Interface Example +@subsection Alternate Interface Example + +Here is a complete program that illustrates Readline's alternate interface. +It reads lines from the terminal and displays them, providing the +standard history and TAB completion functions. +It understands the EOF character or "exit" to exit the program. + +@example +/* Standard include files. stdio.h is required. */ +#include +#include +#include +#include + +/* Used for select(2) */ +#include +#include + +#include + +#include + +/* Standard readline include files. */ +#include +#include + +static void cb_linehandler (char *); +static void sighandler (int); + +int running; +int sigwinch_received; +const char *prompt = "rltest$ "; + +/* Handle SIGWINCH and window size changes when readline is not active and + reading a character. */ +static void +sighandler (int sig) +@{ + sigwinch_received = 1; +@} + +/* Callback function called for each line when accept-line executed, EOF + seen, or EOF character read. This sets a flag and returns; it could + also call exit(3). */ +static void +cb_linehandler (char *line) +@{ + /* Can use ^D (stty eof) or `exit' to exit. */ + if (line == NULL || strcmp (line, "exit") == 0) + @{ + if (line == 0) + printf ("\n"); + printf ("exit\n"); + /* This function needs to be called to reset the terminal settings, + and calling it from the line handler keeps one extra prompt from + being displayed. */ + rl_callback_handler_remove (); + + running = 0; + @} + else + @{ + if (*line) + add_history (line); + printf ("input line: %s\n", line); + free (line); + @} +@} + +int +main (int c, char **v) +@{ + fd_set fds; + int r; + + /* Set the default locale values according to environment variables. */ + setlocale (LC_ALL, ""); + + /* Handle window size changes when readline is not active and reading + characters. */ + signal (SIGWINCH, sighandler); + + /* Install the line handler. */ + rl_callback_handler_install (prompt, cb_linehandler); + + /* Enter a simple event loop. This waits until something is available + to read on readline's input stream (defaults to standard input) and + calls the builtin character read callback to read it. It does not + have to modify the user's terminal settings. */ + running = 1; + while (running) + @{ + FD_ZERO (&fds); + FD_SET (fileno (rl_instream), &fds); + + r = select (FD_SETSIZE, &fds, NULL, NULL, NULL); + if (r < 0 && errno != EINTR) + @{ + perror ("rltest: select"); + rl_callback_handler_remove (); + break; + @} + if (sigwinch_received) + @{ + rl_resize_terminal (); + sigwinch_received = 0; + @} + if (r < 0) + continue; + + if (FD_ISSET (fileno (rl_instream), &fds)) + rl_callback_read_char (); + @} + + printf ("rltest: Event loop has exited\n"); + return 0; +@} +@end example + +@node Readline Signal Handling +@section Readline Signal Handling + +Signals are asynchronous events sent to a process by the Unix kernel, +sometimes on behalf of another process. They are intended to indicate +exceptional events, like a user pressing the interrupt key on his terminal, +or a network connection being broken. There is a class of signals that can +be sent to the process currently reading input from the keyboard. Since +Readline changes the terminal attributes when it is called, it needs to +perform special processing when such a signal is received in order to +restore the terminal to a sane state, or provide application writers with +functions to do so manually. + +Readline contains an internal signal handler that is installed for a +number of signals (@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, +@code{SIGHUP}, +@code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}). +When one of these signals is received, the signal handler +will reset the terminal attributes to those that were in effect before +@code{readline()} was called, reset the signal handling to what it was +before @code{readline()} was called, and resend the signal to the calling +application. +If and when the calling application's signal handler returns, Readline +will reinitialize the terminal and continue to accept input. +When a @code{SIGINT} is received, the Readline signal handler performs +some additional work, which will cause any partially-entered line to be +aborted (see the description of @code{rl_free_line_state()} below). + +There is an additional Readline signal handler, for @code{SIGWINCH}, which +the kernel sends to a process whenever the terminal's size changes (for +example, if a user resizes an @code{xterm}). The Readline @code{SIGWINCH} +handler updates Readline's internal screen size information, and then calls +any @code{SIGWINCH} signal handler the calling application has installed. +Readline calls the application's @code{SIGWINCH} signal handler without +resetting the terminal to its original state. If the application's signal +handler does more than update its idea of the terminal size and return (for +example, a @code{longjmp} back to a main processing loop), it @emph{must} +call @code{rl_cleanup_after_signal()} (described below), to restore the +terminal state. + +When an application is using the callback interface +(@pxref{Alternate Interface}), Readline installs signal handlers only for +the duration of the call to @code{rl_callback_read_char}. Applications +using the callback interface should be prepared to clean up Readline's +state if they wish to handle the signal before the line handler completes +and restores the terminal state. + +If an application using the callback interface wishes to have Readline +install its signal handlers at the time the application calls +@code{rl_callback_handler_install} and remove them only when a complete +line of input has been read, it should set the +@code{rl_persistent_signal_handlers} variable to a non-zero value. +This allows an application to defer all of the handling of the signals +Readline catches to Readline. +Applications should use this variable with care; it can result in Readline +catching signals and not acting on them (or allowing the application to react +to them) until the application calls @code{rl_callback_read_char}. This +can result in an application becoming less responsive to keyboard signals +like SIGINT. +If an application does not want or need to perform any signal handling, or +does not need to do any processing between calls to @code{rl_callback_read_char}, +setting this variable may be desirable. + +Readline provides two variables that allow application writers to +control whether or not it will catch certain signals and act on them +when they are received. It is important that applications change the +values of these variables only when calling @code{readline()}, not in +a signal handler, so Readline's internal signal state is not corrupted. + +@deftypevar int rl_catch_signals +If this variable is non-zero, Readline will install signal handlers for +@code{SIGINT}, @code{SIGQUIT}, @code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, +@code{SIGTSTP}, @code{SIGTTIN}, and @code{SIGTTOU}. + +The default value of @code{rl_catch_signals} is 1. +@end deftypevar + +@deftypevar int rl_catch_sigwinch +If this variable is set to a non-zero value, +Readline will install a signal handler for @code{SIGWINCH}. + +The default value of @code{rl_catch_sigwinch} is 1. +@end deftypevar + +@deftypevar int rl_persistent_signal_handlers +If an application using the callback interface wishes Readline's signal +handlers to be installed and active during the set of calls to +@code{rl_callback_read_char} that constitutes an entire single line, +it should set this variable to a non-zero value. + +The default value of @code{rl_persistent_signal_handlers} is 0. +@end deftypevar + +@deftypevar int rl_change_environment +If this variable is set to a non-zero value, +and Readline is handling @code{SIGWINCH}, Readline will modify the +@var{LINES} and @var{COLUMNS} environment variables upon receipt of a +@code{SIGWINCH} + +The default value of @code{rl_change_environment} is 1. +@end deftypevar + +If an application does not wish to have Readline catch any signals, or +to handle signals other than those Readline catches (@code{SIGHUP}, +for example), +Readline provides convenience functions to do the necessary terminal +and internal state cleanup upon receipt of a signal. + +@deftypefun int rl_pending_signal (void) +Return the signal number of the most recent signal Readline received but +has not yet handled, or 0 if there is no pending signal. +@end deftypefun + +@deftypefun void rl_cleanup_after_signal (void) +This function will reset the state of the terminal to what it was before +@code{readline()} was called, and remove the Readline signal handlers for +all signals, depending on the values of @code{rl_catch_signals} and +@code{rl_catch_sigwinch}. +@end deftypefun + +@deftypefun void rl_free_line_state (void) +This will free any partial state associated with the current input line +(undo information, any partial history entry, any partially-entered +keyboard macro, and any partially-entered numeric argument). This +should be called before @code{rl_cleanup_after_signal()}. The +Readline signal handler for @code{SIGINT} calls this to abort the +current input line. +@end deftypefun + +@deftypefun void rl_reset_after_signal (void) +This will reinitialize the terminal and reinstall any Readline signal +handlers, depending on the values of @code{rl_catch_signals} and +@code{rl_catch_sigwinch}. +@end deftypefun + +If an application wants to force Readline to handle any signals that +have arrived while it has been executing, @code{rl_check_signals()} +will call Readline's internal signal handler if there are any pending +signals. This is primarily intended for those applications that use +a custom @code{rl_getc_function} (@pxref{Readline Variables}) and wish +to handle signals received while waiting for input. + +@deftypefun void rl_check_signals (void) +If there are any pending signals, call Readline's internal signal handling +functions to process them. @code{rl_pending_signal()} can be used independently +to determine whether or not there are any pending signals. +@end deftypefun + +If an application does not wish Readline to catch @code{SIGWINCH}, it may +call @code{rl_resize_terminal()} or @code{rl_set_screen_size()} to force +Readline to update its idea of the terminal size when a @code{SIGWINCH} +is received. + +@deftypefun void rl_echo_signal_char (int sig) +If an application wishes to install its own signal handlers, but still +have readline display characters that generate signals, calling this +function with @var{sig} set to @code{SIGINT}, @code{SIGQUIT}, or +@code{SIGTSTP} will display the character generating that signal. +@end deftypefun + +@deftypefun void rl_resize_terminal (void) +Update Readline's internal screen size by reading values from the kernel. +@end deftypefun + +@deftypefun void rl_set_screen_size (int rows, int cols) +Set Readline's idea of the terminal size to @var{rows} rows and +@var{cols} columns. If either @var{rows} or @var{columns} is less than +or equal to 0, Readline's idea of that terminal dimension is unchanged. +@end deftypefun + +If an application does not want to install a @code{SIGWINCH} handler, but +is still interested in the screen dimensions, Readline's idea of the screen +size may be queried. + +@deftypefun void rl_get_screen_size (int *rows, int *cols) +Return Readline's idea of the terminal's size in the +variables pointed to by the arguments. +@end deftypefun + +@deftypefun void rl_reset_screen_size (void) +Cause Readline to reobtain the screen size and recalculate its dimensions. +@end deftypefun + +The following functions install and remove Readline's signal handlers. + +@deftypefun int rl_set_signals (void) +Install Readline's signal handler for @code{SIGINT}, @code{SIGQUIT}, +@code{SIGTERM}, @code{SIGHUP}, @code{SIGALRM}, @code{SIGTSTP}, @code{SIGTTIN}, +@code{SIGTTOU}, and @code{SIGWINCH}, depending on the values of +@code{rl_catch_signals} and @code{rl_catch_sigwinch}. +@end deftypefun + +@deftypefun int rl_clear_signals (void) +Remove all of the Readline signal handlers installed by +@code{rl_set_signals()}. +@end deftypefun + +@node Custom Completers +@section Custom Completers +@cindex application-specific completion functions + +Typically, a program that reads commands from the user has a way of +disambiguating commands and data. If your program is one of these, then +it can provide completion for commands, data, or both. +The following sections describe how your program and Readline +cooperate to provide this service. + +@menu +* How Completing Works:: The logic used to do completion. +* Completion Functions:: Functions provided by Readline. +* Completion Variables:: Variables which control completion. +* A Short Completion Example:: An example of writing completer subroutines. +@end menu + +@node How Completing Works +@subsection How Completing Works + +In order to complete some text, the full list of possible completions +must be available. That is, it is not possible to accurately +expand a partial word without knowing all of the possible words +which make sense in that context. The Readline library provides +the user interface to completion, and two of the most common +completion functions: filename and username. For completing other types +of text, you must write your own completion function. This section +describes exactly what such functions must do, and provides an example. + +There are three major functions used to perform completion: + +@enumerate +@item +The user-interface function @code{rl_complete()}. This function is +called with the same arguments as other bindable Readline functions: +@var{count} and @var{invoking_key}. +It isolates the word to be completed and calls +@code{rl_completion_matches()} to generate a list of possible completions. +It then either lists the possible completions, inserts the possible +completions, or actually performs the +completion, depending on which behavior is desired. + +@item +The internal function @code{rl_completion_matches()} uses an +application-supplied @dfn{generator} function to generate the list of +possible matches, and then returns the array of these matches. +The caller should place the address of its generator function in +@code{rl_completion_entry_function}. + +@item +The generator function is called repeatedly from +@code{rl_completion_matches()}, returning a string each time. The +arguments to the generator function are @var{text} and @var{state}. +@var{text} is the partial word to be completed. @var{state} is zero the +first time the function is called, allowing the generator to perform +any necessary initialization, and a positive non-zero integer for +each subsequent call. The generator function returns +@code{(char *)NULL} to inform @code{rl_completion_matches()} that there are +no more possibilities left. Usually the generator function computes the +list of possible completions when @var{state} is zero, and returns them +one at a time on subsequent calls. Each string the generator function +returns as a match must be allocated with @code{malloc()}; Readline +frees the strings when it has finished with them. +Such a generator function is referred to as an +@dfn{application-specific completion function}. + +@end enumerate + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{rl_completion_matches()}). The default is to do filename completion. +@end deftypefun + +@deftypevar {rl_compentry_func_t *} rl_completion_entry_function +This is a pointer to the generator function for +@code{rl_completion_matches()}. +If the value of @code{rl_completion_entry_function} is +@code{NULL} then the default filename generator +function, @code{rl_filename_completion_function()}, is used. +An @dfn{application-specific completion function} is a function whose +address is assigned to @code{rl_completion_entry_function} and whose +return values are used to generate possible completions. +@end deftypevar + +@node Completion Functions +@subsection Completion Functions + +Here is the complete list of callable completion functions present in +Readline. + +@deftypefun int rl_complete_internal (int what_to_do) +Complete the word at or before point. @var{what_to_do} says what to do +with the completion. A value of @samp{?} means list the possible +completions. @samp{TAB} means do standard completion. @samp{*} means +insert all of the possible completions. @samp{!} means to display +all of the possible completions, if there is more than one, as well as +performing partial completion. @samp{@@} is similar to @samp{!}, but +possible completions are not listed if the possible completions share +a common prefix. +@end deftypefun + +@deftypefun int rl_complete (int ignore, int invoking_key) +Complete the word at or before point. You have supplied the function +that does the initial simple matching selection algorithm (see +@code{rl_completion_matches()} and @code{rl_completion_entry_function}). +The default is to do filename +completion. This calls @code{rl_complete_internal()} with an +argument depending on @var{invoking_key}. +@end deftypefun + +@deftypefun int rl_possible_completions (int count, int invoking_key) +List the possible completions. See description of @code{rl_complete +()}. This calls @code{rl_complete_internal()} with an argument of +@samp{?}. +@end deftypefun + +@deftypefun int rl_insert_completions (int count, int invoking_key) +Insert the list of possible completions into the line, deleting the +partially-completed word. See description of @code{rl_complete()}. +This calls @code{rl_complete_internal()} with an argument of @samp{*}. +@end deftypefun + +@deftypefun int rl_completion_mode (rl_command_func_t *cfunc) +Returns the appropriate value to pass to @code{rl_complete_internal()} +depending on whether @var{cfunc} was called twice in succession and +the values of the @code{show-all-if-ambiguous} and +@code{show-all-if-unmodified} variables. +Application-specific completion functions may use this function to present +the same interface as @code{rl_complete()}. +@end deftypefun + +@deftypefun {char **} rl_completion_matches (const char *text, rl_compentry_func_t *entry_func) +Returns an array of strings which is a list of completions for +@var{text}. If there are no completions, returns @code{NULL}. +The first entry in the returned array is the substitution for @var{text}. +The remaining entries are the possible completions. The array is +terminated with a @code{NULL} pointer. + +@var{entry_func} is a function of two args, and returns a +@code{char *}. The first argument is @var{text}. The second is a +state argument; it is zero on the first call, and non-zero on subsequent +calls. @var{entry_func} returns a @code{NULL} pointer to the caller +when there are no more matches. +@end deftypefun + +@deftypefun {char *} rl_filename_completion_function (const char *text, int state) +A generator function for filename completion in the general case. +@var{text} is a partial filename. +The Bash source is a useful reference for writing application-specific +completion functions (the Bash completion functions call this and other +Readline functions). +@end deftypefun + +@deftypefun {char *} rl_username_completion_function (const char *text, int state) +A completion generator for usernames. @var{text} contains a partial +username preceded by a random character (usually @samp{~}). As with all +completion generators, @var{state} is zero on the first call and non-zero +for subsequent calls. +@end deftypefun + +@node Completion Variables +@subsection Completion Variables + +@deftypevar {rl_compentry_func_t *} rl_completion_entry_function +A pointer to the generator function for @code{rl_completion_matches()}. +@code{NULL} means to use @code{rl_filename_completion_function()}, +the default filename completer. +@end deftypevar + +@deftypevar {rl_completion_func_t *} rl_attempted_completion_function +A pointer to an alternative function to create matches. +The function is called with @var{text}, @var{start}, and @var{end}. +@var{start} and @var{end} are indices in @code{rl_line_buffer} defining +the boundaries of @var{text}, which is a character string. +If this function exists and returns @code{NULL}, or if this variable is +set to @code{NULL}, then @code{rl_complete()} will call the value of +@code{rl_completion_entry_function} to generate matches, otherwise the +array of strings returned will be used. +If this function sets the @code{rl_attempted_completion_over} +variable to a non-zero value, Readline will not perform its default +completion even if this function returns no matches. +@end deftypevar + +@deftypevar {rl_quote_func_t *} rl_filename_quoting_function +A pointer to a function that will quote a filename in an +application-specific fashion. This is called if filename completion is being +attempted and one of the characters in @code{rl_filename_quote_characters} +appears in a completed filename. The function is called with +@var{text}, @var{match_type}, and @var{quote_pointer}. The @var{text} +is the filename to be quoted. The @var{match_type} is either +@code{SINGLE_MATCH}, if there is only one completion match, or +@code{MULT_MATCH}. Some functions use this to decide whether or not to +insert a closing quote character. The @var{quote_pointer} is a pointer +to any opening quote character the user typed. Some functions choose +to reset this character. +@end deftypevar + +@deftypevar {rl_dequote_func_t *} rl_filename_dequoting_function +A pointer to a function that will remove application-specific quoting +characters from a filename before completion is attempted, so those +characters do not interfere with matching the text against names in +the filesystem. It is called with @var{text}, the text of the word +to be dequoted, and @var{quote_char}, which is the quoting character +that delimits the filename (usually @samp{'} or @samp{"}). If +@var{quote_char} is zero, the filename was not in an embedded string. +@end deftypevar + +@deftypevar {rl_linebuf_func_t *} rl_char_is_quoted_p +A pointer to a function to call that determines whether or not a specific +character in the line buffer is quoted, according to whatever quoting +mechanism the program calling Readline uses. The function is called with +two arguments: @var{text}, the text of the line, and @var{index}, the +index of the character in the line. It is used to decide whether a +character found in @code{rl_completer_word_break_characters} should be +used to break words for the completer. +@end deftypevar + +@deftypevar {rl_compignore_func_t *} rl_ignore_some_completions_function +This function, if defined, is called by the completer when real filename +completion is done, after all the matching names have been generated. +It is passed a @code{NULL} terminated array of matches. +The first element (@code{matches[0]}) is the +maximal substring common to all matches. This function can +re-arrange the list of matches as required, but each element deleted +from the array must be freed. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_directory_completion_hook +This function, if defined, is allowed to modify the directory portion +of filenames Readline completes. +It could be used to expand symbolic links or shell variables in pathnames. +It is called with the address of a string (the current directory name) as an +argument, and may modify that string. +If the string is replaced with a new string, the old value should be freed. +Any modified directory name should have a trailing slash. +The modified value will be used as part of the completion, replacing +the directory portion of the pathname the user typed. +At the least, even if no other expansion is performed, this function should +remove any quote characters from the directory name, because its result will +be passed directly to @code{opendir()}. + +The directory completion hook returns an integer that should be non-zero if +the function modifies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_directory_rewrite_hook; +If non-zero, this is the address of a function to call when completing +a directory name. This function takes the address of the directory name +to be modified as an argument. Unlike @code{rl_directory_completion_hook}, +it only modifies the directory name used in @code{opendir}, not what is +displayed when the possible completions are printed or inserted. It is +called before rl_directory_completion_hook. +At the least, even if no other expansion is performed, this function should +remove any quote characters from the directory name, because its result will +be passed directly to @code{opendir()}. + +The directory rewrite hook returns an integer that should be non-zero if +the function modfies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_icppfunc_t *} rl_filename_stat_hook +If non-zero, this is the address of a function for the completer to +call before deciding which character to append to a completed name. +This function modifies its filename name argument, and the modified value +is passed to @code{stat()} to determine the file's type and characteristics. +This function does not need to remove quote characters from the filename. + +The stat hook returns an integer that should be non-zero if +the function modfies its directory argument. +The function should not modify the directory argument if it returns 0. +@end deftypevar + +@deftypevar {rl_dequote_func_t *} rl_filename_rewrite_hook +If non-zero, this is the address of a function called when reading +directory entries from the filesystem for completion and comparing +them to the partial word to be completed. The function should +perform any necessary application or system-specific conversion on +the filename, such as converting between character sets or converting +from a filesystem format to a character input format. +The function takes two arguments: @var{fname}, the filename to be converted, +and @var{fnlen}, its length in bytes. +It must either return its first argument (if no conversion takes place) +or the converted filename in newly-allocated memory. The converted +form is used to compare against the word to be completed, and, if it +matches, is added to the list of matches. Readline will free the +allocated string. +@end deftypevar + +@deftypevar {rl_compdisp_func_t *} rl_completion_display_matches_hook +If non-zero, then this is the address of a function to call when +completing a word would normally display the list of possible matches. +This function is called in lieu of Readline displaying the list. +It takes three arguments: +(@code{char **}@var{matches}, @code{int} @var{num_matches}, @code{int} @var{max_length}) +where @var{matches} is the array of matching strings, +@var{num_matches} is the number of strings in that array, and +@var{max_length} is the length of the longest string in that array. +Readline provides a convenience function, @code{rl_display_match_list}, +that takes care of doing the display to Readline's output stream. +You may call that function from this hook. +@end deftypevar + +@deftypevar {const char *} rl_basic_word_break_characters +The basic list of characters that signal a break between words for the +completer routine. The default value of this variable is the characters +which break words for completion in Bash: +@code{" \t\n\"\\'`@@$><=;|&@{("}. +@end deftypevar + +@deftypevar {const char *} rl_basic_quote_characters +A list of quote characters which can cause a word break. +@end deftypevar + +@deftypevar {const char *} rl_completer_word_break_characters +The list of characters that signal a break between words for +@code{rl_complete_internal()}. The default list is the value of +@code{rl_basic_word_break_characters}. +@end deftypevar + +@deftypevar {rl_cpvfunc_t *} rl_completion_word_break_hook +If non-zero, this is the address of a function to call when Readline is +deciding where to separate words for word completion. It should return +a character string like @code{rl_completer_word_break_characters} to be +used to perform the current completion. The function may choose to set +@code{rl_completer_word_break_characters} itself. If the function +returns @code{NULL}, @code{rl_completer_word_break_characters} is used. +@end deftypevar + +@deftypevar {const char *} rl_completer_quote_characters +A list of characters which can be used to quote a substring of the line. +Completion occurs on the entire substring, and within the substring +@code{rl_completer_word_break_characters} are treated as any other character, +unless they also appear within this list. +@end deftypevar + +@deftypevar {const char *} rl_filename_quote_characters +A list of characters that cause a filename to be quoted by the completer +when they appear in a completed filename. The default is the null string. +@end deftypevar + +@deftypevar {const char *} rl_special_prefixes +The list of characters that are word break characters, but should be +left in @var{text} when it is passed to the completion function. +Programs can use this to help determine what kind of completing to do. +For instance, Bash sets this variable to "$@@" so that it can complete +shell variables and hostnames. +@end deftypevar + +@deftypevar int rl_completion_query_items +Up to this many items will be displayed in response to a +possible-completions call. After that, readline asks the user if she is sure +she wants to see them all. The default value is 100. A negative value +indicates that Readline should never ask the user. +@end deftypevar + +@deftypevar {int} rl_completion_append_character +When a single completion alternative matches at the end of the command +line, this character is appended to the inserted completion text. The +default is a space character (@samp{ }). Setting this to the null +character (@samp{\0}) prevents anything being appended automatically. +This can be changed in application-specific completion functions to +provide the ``most sensible word separator character'' according to +an application-specific command line syntax specification. +It is set to the default before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_suppress_append +If non-zero, @var{rl_completion_append_character} is not appended to +matches at the end of the command line, as described above. +It is set to 0 before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_quote_character +When Readline is completing quoted text, as delimited by one of the +characters in @var{rl_completer_quote_characters}, it sets this variable +to the quoting character found. +This is set before any application-specific completion function is called. +@end deftypevar + +@deftypevar int rl_completion_suppress_quote +If non-zero, Readline does not append a matching quote character when +performing completion on a quoted string. +It is set to 0 before any application-specific completion function +is called, and may only be changed within such a function. +@end deftypevar + +@deftypevar int rl_completion_found_quote +When Readline is completing quoted text, it sets this variable +to a non-zero value if the word being completed contains or is delimited +by any quoting characters, including backslashes. +This is set before any application-specific completion function is called. +@end deftypevar + +@deftypevar int rl_completion_mark_symlink_dirs +If non-zero, a slash will be appended to completed filenames that are +symbolic links to directory names, subject to the value of the +user-settable @var{mark-directories} variable. +This variable exists so that application-specific completion functions +can override the user's global preference (set via the +@var{mark-symlinked-directories} Readline variable) if appropriate. +This variable is set to the user's preference before any +application-specific completion function is called, so unless that +function modifies the value, the user's preferences are honored. +@end deftypevar + +@deftypevar int rl_ignore_completion_duplicates +If non-zero, then duplicates in the matches are removed. +The default is 1. +@end deftypevar + +@deftypevar int rl_filename_completion_desired +Non-zero means that the results of the matches are to be treated as +filenames. This is @emph{always} zero when completion is attempted, +and can only be changed +within an application-specific completion function. If it is set to a +non-zero value by such a function, directory names have a slash appended +and Readline attempts to quote completed filenames if they contain any +characters in @code{rl_filename_quote_characters} and +@code{rl_filename_quoting_desired} is set to a non-zero value. +@end deftypevar + +@deftypevar int rl_filename_quoting_desired +Non-zero means that the results of the matches are to be quoted using +double quotes (or an application-specific quoting mechanism) if the +completed filename contains any characters in +@code{rl_filename_quote_chars}. This is @emph{always} non-zero +when completion is attempted, and can only be changed within an +application-specific completion function. +The quoting is effected via a call to the function pointed to +by @code{rl_filename_quoting_function}. +@end deftypevar + +@deftypevar int rl_attempted_completion_over +If an application-specific completion function assigned to +@code{rl_attempted_completion_function} sets this variable to a non-zero +value, Readline will not perform its default filename completion even +if the application's completion function returns no matches. +It should be set only by an application's completion function. +@end deftypevar + +@deftypevar int rl_sort_completion_matches +If an application sets this variable to 0, Readline will not sort the +list of completions (which implies that it cannot remove any duplicate +completions). The default value is 1, which means that Readline will +sort the completions and, depending on the value of +@code{rl_ignore_completion_duplicates}, will attempt to remove duplicate +matches. +@end deftypevar + +@deftypevar int rl_completion_type +Set to a character describing the type of completion Readline is currently +attempting; see the description of @code{rl_complete_internal()} +(@pxref{Completion Functions}) for the list of characters. +This is set to the appropriate value before any application-specific +completion function is called, allowing such functions to present +the same interface as @code{rl_complete()}. +@end deftypevar + +@deftypevar int rl_completion_invoking_key +Set to the final character in the key sequence that invoked one of the +completion functions that call @code{rl_complete_internal()}. This is +set to the appropriate value before any application-specific completion +function is called. +@end deftypevar + +@deftypevar int rl_inhibit_completion +If this variable is non-zero, completion is inhibited. The completion +character will be inserted as any other bound to @code{self-insert}. +@end deftypevar + +@node A Short Completion Example +@subsection A Short Completion Example + +Here is a small application demonstrating the use of the GNU Readline +library. It is called @code{fileman}, and the source code resides in +@file{examples/fileman.c}. This sample application provides +completion of command names, line editing features, and access to the +history list. + +@page +@smallexample +/* fileman.c -- A tiny application which demonstrates how to use the + GNU Readline library. This application interactively allows users + to manipulate files and their modes. */ + +#ifdef HAVE_CONFIG_H +# include +#endif + +#include +#ifdef HAVE_SYS_FILE_H +# include +#endif +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include +#include +#include + +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +#ifdef HAVE_STDLIB_H +# include +#endif + +#include + +#include +#include + +extern char *xmalloc PARAMS((size_t)); + +/* The names of functions that actually do the manipulation. */ +int com_list PARAMS((char *)); +int com_view PARAMS((char *)); +int com_rename PARAMS((char *)); +int com_stat PARAMS((char *)); +int com_pwd PARAMS((char *)); +int com_delete PARAMS((char *)); +int com_help PARAMS((char *)); +int com_cd PARAMS((char *)); +int com_quit PARAMS((char *)); + +/* A structure which contains information on the commands this program + can understand. */ + +typedef struct @{ + char *name; /* User printable name of the function. */ + rl_icpfunc_t *func; /* Function to call to do the job. */ + char *doc; /* Documentation for this function. */ +@} COMMAND; + +COMMAND commands[] = @{ + @{ "cd", com_cd, "Change to directory DIR" @}, + @{ "delete", com_delete, "Delete FILE" @}, + @{ "help", com_help, "Display this text" @}, + @{ "?", com_help, "Synonym for `help'" @}, + @{ "list", com_list, "List files in DIR" @}, + @{ "ls", com_list, "Synonym for `list'" @}, + @{ "pwd", com_pwd, "Print the current working directory" @}, + @{ "quit", com_quit, "Quit using Fileman" @}, + @{ "rename", com_rename, "Rename FILE to NEWNAME" @}, + @{ "stat", com_stat, "Print out statistics on FILE" @}, + @{ "view", com_view, "View the contents of FILE" @}, + @{ (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL @} +@}; + +/* Forward declarations. */ +char *stripwhite (); +COMMAND *find_command (); + +/* The name of this program, as taken from argv[0]. */ +char *progname; + +/* When non-zero, this global means the user is done using this program. */ +int done; + +char * +dupstr (s) + char *s; +@{ + char *r; + + r = xmalloc (strlen (s) + 1); + strcpy (r, s); + return (r); +@} + +main (argc, argv) + int argc; + char **argv; +@{ + char *line, *s; + + progname = argv[0]; + + initialize_readline (); /* Bind our completer. */ + + /* Loop reading and executing lines until the user quits. */ + for ( ; done == 0; ) + @{ + line = readline ("FileMan: "); + + if (!line) + break; + + /* Remove leading and trailing whitespace from the line. + Then, if there is anything left, add it to the history list + and execute it. */ + s = stripwhite (line); + + if (*s) + @{ + add_history (s); + execute_line (s); + @} + + free (line); + @} + exit (0); +@} + +/* Execute a command line. */ +int +execute_line (line) + char *line; +@{ + register int i; + COMMAND *command; + char *word; + + /* Isolate the command word. */ + i = 0; + while (line[i] && whitespace (line[i])) + i++; + word = line + i; + + while (line[i] && !whitespace (line[i])) + i++; + + if (line[i]) + line[i++] = '\0'; + + command = find_command (word); + + if (!command) + @{ + fprintf (stderr, "%s: No such command for FileMan.\n", word); + return (-1); + @} + + /* Get argument to command, if any. */ + while (whitespace (line[i])) + i++; + + word = line + i; + + /* Call the function. */ + return ((*(command->func)) (word)); +@} + +/* Look up NAME as the name of a command, and return a pointer to that + command. Return a NULL pointer if NAME isn't a command name. */ +COMMAND * +find_command (name) + char *name; +@{ + register int i; + + for (i = 0; commands[i].name; i++) + if (strcmp (name, commands[i].name) == 0) + return (&commands[i]); + + return ((COMMAND *)NULL); +@} + +/* Strip whitespace from the start and end of STRING. Return a pointer + into STRING. */ +char * +stripwhite (string) + char *string; +@{ + register char *s, *t; + + for (s = string; whitespace (*s); s++) + ; + + if (*s == 0) + return (s); + + t = s + strlen (s) - 1; + while (t > s && whitespace (*t)) + t--; + *++t = '\0'; + + return s; +@} + +/* **************************************************************** */ +/* */ +/* Interface to Readline Completion */ +/* */ +/* **************************************************************** */ + +char *command_generator PARAMS((const char *, int)); +char **fileman_completion PARAMS((const char *, int, int)); + +/* Tell the GNU Readline library how to complete. We want to try to complete + on command names if this is the first word in the line, or on filenames + if not. */ +initialize_readline () +@{ + /* Allow conditional parsing of the ~/.inputrc file. */ + rl_readline_name = "FileMan"; + + /* Tell the completer that we want a crack first. */ + rl_attempted_completion_function = fileman_completion; +@} + +/* Attempt to complete on the contents of TEXT. START and END bound the + region of rl_line_buffer that contains the word to complete. TEXT is + the word to complete. We can use the entire contents of rl_line_buffer + in case we want to do some simple parsing. Return the array of matches, + or NULL if there aren't any. */ +char ** +fileman_completion (text, start, end) + const char *text; + int start, end; +@{ + char **matches; + + matches = (char **)NULL; + + /* If this word is at the start of the line, then it is a command + to complete. Otherwise it is the name of a file in the current + directory. */ + if (start == 0) + matches = rl_completion_matches (text, command_generator); + + return (matches); +@} + +/* Generator function for command completion. STATE lets us know whether + to start from scratch; without any state (i.e. STATE == 0), then we + start at the top of the list. */ +char * +command_generator (text, state) + const char *text; + int state; +@{ + static int list_index, len; + char *name; + + /* If this is a new word to complete, initialize now. This includes + saving the length of TEXT for efficiency, and initializing the index + variable to 0. */ + if (!state) + @{ + list_index = 0; + len = strlen (text); + @} + + /* Return the next name which partially matches from the command list. */ + while (name = commands[list_index].name) + @{ + list_index++; + + if (strncmp (name, text, len) == 0) + return (dupstr(name)); + @} + + /* If no names matched, then return NULL. */ + return ((char *)NULL); +@} + +/* **************************************************************** */ +/* */ +/* FileMan Commands */ +/* */ +/* **************************************************************** */ + +/* String to pass to system (). This is for the LIST, VIEW and RENAME + commands. */ +static char syscom[1024]; + +/* List the file(s) named in arg. */ +com_list (arg) + char *arg; +@{ + if (!arg) + arg = ""; + + sprintf (syscom, "ls -FClg %s", arg); + return (system (syscom)); +@} + +com_view (arg) + char *arg; +@{ + if (!valid_argument ("view", arg)) + return 1; + +#if defined (__MSDOS__) + /* more.com doesn't grok slashes in pathnames */ + sprintf (syscom, "less %s", arg); +#else + sprintf (syscom, "more %s", arg); +#endif + return (system (syscom)); +@} + +com_rename (arg) + char *arg; +@{ + too_dangerous ("rename"); + return (1); +@} + +com_stat (arg) + char *arg; +@{ + struct stat finfo; + + if (!valid_argument ("stat", arg)) + return (1); + + if (stat (arg, &finfo) == -1) + @{ + perror (arg); + return (1); + @} + + printf ("Statistics for `%s':\n", arg); + + printf ("%s has %d link%s, and is %d byte%s in length.\n", + arg, + finfo.st_nlink, + (finfo.st_nlink == 1) ? "" : "s", + finfo.st_size, + (finfo.st_size == 1) ? "" : "s"); + printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); + printf (" Last access at: %s", ctime (&finfo.st_atime)); + printf (" Last modified at: %s", ctime (&finfo.st_mtime)); + return (0); +@} + +com_delete (arg) + char *arg; +@{ + too_dangerous ("delete"); + return (1); +@} + +/* Print out help for ARG, or for all of the commands if ARG is + not present. */ +com_help (arg) + char *arg; +@{ + register int i; + int printed = 0; + + for (i = 0; commands[i].name; i++) + @{ + if (!*arg || (strcmp (arg, commands[i].name) == 0)) + @{ + printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); + printed++; + @} + @} + + if (!printed) + @{ + printf ("No commands match `%s'. Possibilties are:\n", arg); + + for (i = 0; commands[i].name; i++) + @{ + /* Print in six columns. */ + if (printed == 6) + @{ + printed = 0; + printf ("\n"); + @} + + printf ("%s\t", commands[i].name); + printed++; + @} + + if (printed) + printf ("\n"); + @} + return (0); +@} + +/* Change to the directory ARG. */ +com_cd (arg) + char *arg; +@{ + if (chdir (arg) == -1) + @{ + perror (arg); + return 1; + @} + + com_pwd (""); + return (0); +@} + +/* Print out the current working directory. */ +com_pwd (ignore) + char *ignore; +@{ + char dir[1024], *s; + + s = getcwd (dir, sizeof(dir) - 1); + if (s == 0) + @{ + printf ("Error getting pwd: %s\n", dir); + return 1; + @} + + printf ("Current directory is %s\n", dir); + return 0; +@} + +/* The user wishes to quit using this program. Just set DONE non-zero. */ +com_quit (arg) + char *arg; +@{ + done = 1; + return (0); +@} + +/* Function which tells you that you can't do this. */ +too_dangerous (caller) + char *caller; +@{ + fprintf (stderr, + "%s: Too dangerous for me to distribute. Write it yourself.\n", + caller); +@} + +/* Return non-zero if ARG is a valid argument for CALLER, else print + an error message and return zero. */ +int +valid_argument (caller, arg) + char *caller, *arg; +@{ + if (!arg || !*arg) + @{ + fprintf (stderr, "%s: Argument required.\n", caller); + return (0); + @} + + return (1); +@} +@end smallexample diff --git a/readline/readline/doc/rluser.texi b/readline/readline/doc/rluser.texi new file mode 100644 index 0000000000..a59bd14463 --- /dev/null +++ b/readline/readline/doc/rluser.texi @@ -0,0 +1,2389 @@ +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rluser.info +@comment %**end of header (This is for running Texinfo on a region.) + +@ignore +This file documents the end user interface to the GNU command line +editing features. It is to be an appendix to manuals for programs which +use these features. There is a document entitled "readline.texinfo" +which contains both end-user and programmer documentation for the +GNU Readline Library. + +Copyright (C) 1988--2016 Free Software Foundation, Inc. + +Authored by Brian Fox and Chet Ramey. + +Permission is granted to process this file through Tex and print the +results, provided the printed document carries copying permission notice +identical to this one except for the removal of this paragraph (this +paragraph not being relevant to the printed manual). + +Permission is granted to make and distribute verbatim copies of this manual +provided the copyright notice and this permission notice are preserved on +all copies. + +Permission is granted to copy and distribute modified versions of this +manual under the conditions for verbatim copying, provided also that the +GNU Copyright statement is available to the distributee, and provided that +the entire resulting derived work is distributed under the terms of a +permission notice identical to this one. + +Permission is granted to copy and distribute translations of this manual +into another language, under the above conditions for modified versions. +@end ignore + +@comment If you are including this manual as an appendix, then set the +@comment variable readline-appendix. + +@ifclear BashFeatures +@defcodeindex bt +@end ifclear + +@node Command Line Editing +@chapter Command Line Editing + +This chapter describes the basic features of the @sc{gnu} +command line editing interface. +@ifset BashFeatures +Command line editing is provided by the Readline library, which is +used by several different programs, including Bash. +Command line editing is enabled by default when using an interactive shell, +unless the @option{--noediting} option is supplied at shell invocation. +Line editing is also used when using the @option{-e} option to the +@code{read} builtin command (@pxref{Bash Builtins}). +By default, the line editing commands are similar to those of Emacs. +A vi-style line editing interface is also available. +Line editing can be enabled at any time using the @option{-o emacs} or +@option{-o vi} options to the @code{set} builtin command +(@pxref{The Set Builtin}), or disabled using the @option{+o emacs} or +@option{+o vi} options to @code{set}. +@end ifset + +@menu +* Introduction and Notation:: Notation used in this text. +* Readline Interaction:: The minimum set of commands for editing a line. +* Readline Init File:: Customizing Readline from a user's view. +* Bindable Readline Commands:: A description of most of the Readline commands + available for binding +* Readline vi Mode:: A short description of how to make Readline + behave like the vi editor. +@ifset BashFeatures +* Programmable Completion:: How to specify the possible completions for + a specific command. +* Programmable Completion Builtins:: Builtin commands to specify how to + complete arguments for a particular command. +* A Programmable Completion Example:: An example shell function for + generating possible completions. +@end ifset +@end menu + +@node Introduction and Notation +@section Introduction to Line Editing + +The following paragraphs describe the notation used to represent +keystrokes. + +The text @kbd{C-k} is read as `Control-K' and describes the character +produced when the @key{k} key is pressed while the Control key +is depressed. + +The text @kbd{M-k} is read as `Meta-K' and describes the character +produced when the Meta key (if you have one) is depressed, and the @key{k} +key is pressed. +The Meta key is labeled @key{ALT} on many keyboards. +On keyboards with two keys labeled @key{ALT} (usually to either side of +the space bar), the @key{ALT} on the left side is generally set to +work as a Meta key. +The @key{ALT} key on the right may also be configured to work as a +Meta key or may be configured as some other modifier, such as a +Compose key for typing accented characters. + +If you do not have a Meta or @key{ALT} key, or another key working as +a Meta key, the identical keystroke can be generated by typing @key{ESC} +@emph{first}, and then typing @key{k}. +Either process is known as @dfn{metafying} the @key{k} key. + +The text @kbd{M-C-k} is read as `Meta-Control-k' and describes the +character produced by @dfn{metafying} @kbd{C-k}. + +In addition, several keys have their own names. Specifically, +@key{DEL}, @key{ESC}, @key{LFD}, @key{SPC}, @key{RET}, and @key{TAB} all +stand for themselves when seen in this text, or in an init file +(@pxref{Readline Init File}). +If your keyboard lacks a @key{LFD} key, typing @key{C-j} will +produce the desired character. +The @key{RET} key may be labeled @key{Return} or @key{Enter} on +some keyboards. + +@node Readline Interaction +@section Readline Interaction +@cindex interaction, readline + +Often during an interactive session you type in a long line of text, +only to notice that the first word on the line is misspelled. The +Readline library gives you a set of commands for manipulating the text +as you type it in, allowing you to just fix your typo, and not forcing +you to retype the majority of the line. Using these editing commands, +you move the cursor to the place that needs correction, and delete or +insert the text of the corrections. Then, when you are satisfied with +the line, you simply press @key{RET}. You do not have to be at the +end of the line to press @key{RET}; the entire line is accepted +regardless of the location of the cursor within the line. + +@menu +* Readline Bare Essentials:: The least you need to know about Readline. +* Readline Movement Commands:: Moving about the input line. +* Readline Killing Commands:: How to delete text, and how to get it back! +* Readline Arguments:: Giving numeric arguments to commands. +* Searching:: Searching through previous lines. +@end menu + +@node Readline Bare Essentials +@subsection Readline Bare Essentials +@cindex notation, readline +@cindex command editing +@cindex editing command lines + +In order to enter characters into the line, simply type them. The typed +character appears where the cursor was, and then the cursor moves one +space to the right. If you mistype a character, you can use your +erase character to back up and delete the mistyped character. + +Sometimes you may mistype a character, and +not notice the error until you have typed several other characters. In +that case, you can type @kbd{C-b} to move the cursor to the left, and then +correct your mistake. Afterwards, you can move the cursor to the right +with @kbd{C-f}. + +When you add text in the middle of a line, you will notice that characters +to the right of the cursor are `pushed over' to make room for the text +that you have inserted. Likewise, when you delete text behind the cursor, +characters to the right of the cursor are `pulled back' to fill in the +blank space created by the removal of the text. A list of the bare +essentials for editing the text of an input line follows. + +@table @asis +@item @kbd{C-b} +Move back one character. +@item @kbd{C-f} +Move forward one character. +@item @key{DEL} or @key{Backspace} +Delete the character to the left of the cursor. +@item @kbd{C-d} +Delete the character underneath the cursor. +@item @w{Printing characters} +Insert the character into the line at the cursor. +@item @kbd{C-_} or @kbd{C-x C-u} +Undo the last editing command. You can undo all the way back to an +empty line. +@end table + +@noindent +(Depending on your configuration, the @key{Backspace} key be set to +delete the character to the left of the cursor and the @key{DEL} key set +to delete the character underneath the cursor, like @kbd{C-d}, rather +than the character to the left of the cursor.) + +@node Readline Movement Commands +@subsection Readline Movement Commands + + +The above table describes the most basic keystrokes that you need +in order to do editing of the input line. For your convenience, many +other commands have been added in addition to @kbd{C-b}, @kbd{C-f}, +@kbd{C-d}, and @key{DEL}. Here are some commands for moving more rapidly +about the line. + +@table @kbd +@item C-a +Move to the start of the line. +@item C-e +Move to the end of the line. +@item M-f +Move forward a word, where a word is composed of letters and digits. +@item M-b +Move backward a word. +@item C-l +Clear the screen, reprinting the current line at the top. +@end table + +Notice how @kbd{C-f} moves forward a character, while @kbd{M-f} moves +forward a word. It is a loose convention that control keystrokes +operate on characters while meta keystrokes operate on words. + +@node Readline Killing Commands +@subsection Readline Killing Commands + +@cindex killing text +@cindex yanking text + +@dfn{Killing} text means to delete the text from the line, but to save +it away for later use, usually by @dfn{yanking} (re-inserting) +it back into the line. +(`Cut' and `paste' are more recent jargon for `kill' and `yank'.) + +If the description for a command says that it `kills' text, then you can +be sure that you can get the text back in a different (or the same) +place later. + +When you use a kill command, the text is saved in a @dfn{kill-ring}. +Any number of consecutive kills save all of the killed text together, so +that when you yank it back, you get it all. The kill +ring is not line specific; the text that you killed on a previously +typed line is available to be yanked back later, when you are typing +another line. +@cindex kill ring + +Here is the list of commands for killing text. + +@table @kbd +@item C-k +Kill the text from the current cursor position to the end of the line. + +@item M-d +Kill from the cursor to the end of the current word, or, if between +words, to the end of the next word. +Word boundaries are the same as those used by @kbd{M-f}. + +@item M-@key{DEL} +Kill from the cursor the start of the current word, or, if between +words, to the start of the previous word. +Word boundaries are the same as those used by @kbd{M-b}. + +@item C-w +Kill from the cursor to the previous whitespace. This is different than +@kbd{M-@key{DEL}} because the word boundaries differ. + +@end table + +Here is how to @dfn{yank} the text back into the line. Yanking +means to copy the most-recently-killed text from the kill buffer. + +@table @kbd +@item C-y +Yank the most recently killed text back into the buffer at the cursor. + +@item M-y +Rotate the kill-ring, and yank the new top. You can only do this if +the prior command is @kbd{C-y} or @kbd{M-y}. +@end table + +@node Readline Arguments +@subsection Readline Arguments + +You can pass numeric arguments to Readline commands. Sometimes the +argument acts as a repeat count, other times it is the @i{sign} of the +argument that is significant. If you pass a negative argument to a +command which normally acts in a forward direction, that command will +act in a backward direction. For example, to kill text back to the +start of the line, you might type @samp{M-- C-k}. + +The general way to pass numeric arguments to a command is to type meta +digits before the command. If the first `digit' typed is a minus +sign (@samp{-}), then the sign of the argument will be negative. Once +you have typed one meta digit to get the argument started, you can type +the remainder of the digits, and then the command. For example, to give +the @kbd{C-d} command an argument of 10, you could type @samp{M-1 0 C-d}, +which will delete the next ten characters on the input line. + +@node Searching +@subsection Searching for Commands in the History + +Readline provides commands for searching through the command history +@ifset BashFeatures +(@pxref{Bash History Facilities}) +@end ifset +for lines containing a specified string. +There are two search modes: @dfn{incremental} and @dfn{non-incremental}. + +Incremental searches begin before the user has finished typing the +search string. +As each character of the search string is typed, Readline displays +the next entry from the history matching the string typed so far. +An incremental search requires only as many characters as needed to +find the desired history entry. +To search backward in the history for a particular string, type +@kbd{C-r}. Typing @kbd{C-s} searches forward through the history. +The characters present in the value of the @code{isearch-terminators} variable +are used to terminate an incremental search. +If that variable has not been assigned a value, the @key{ESC} and +@kbd{C-J} characters will terminate an incremental search. +@kbd{C-g} will abort an incremental search and restore the original line. +When the search is terminated, the history entry containing the +search string becomes the current line. + +To find other matching entries in the history list, type @kbd{C-r} or +@kbd{C-s} as appropriate. +This will search backward or forward in the history for the next +entry matching the search string typed so far. +Any other key sequence bound to a Readline command will terminate +the search and execute that command. +For instance, a @key{RET} will terminate the search and accept +the line, thereby executing the command from the history list. +A movement command will terminate the search, make the last line found +the current line, and begin editing. + +Readline remembers the last incremental search string. If two +@kbd{C-r}s are typed without any intervening characters defining a new +search string, any remembered search string is used. + +Non-incremental searches read the entire search string before starting +to search for matching history lines. The search string may be +typed by the user or be part of the contents of the current line. + +@node Readline Init File +@section Readline Init File +@cindex initialization file, readline + +Although the Readline library comes with a set of Emacs-like +keybindings installed by default, it is possible to use a different set +of keybindings. +Any user can customize programs that use Readline by putting +commands in an @dfn{inputrc} file, conventionally in his home directory. +The name of this +@ifset BashFeatures +file is taken from the value of the shell variable @env{INPUTRC}. If +@end ifset +@ifclear BashFeatures +file is taken from the value of the environment variable @env{INPUTRC}. If +@end ifclear +that variable is unset, the default is @file{~/.inputrc}. If that +file does not exist or cannot be read, the ultimate default is +@file{/etc/inputrc}. + +When a program which uses the Readline library starts up, the +init file is read, and the key bindings are set. + +In addition, the @code{C-x C-r} command re-reads this init file, thus +incorporating any changes that you might have made to it. + +@menu +* Readline Init File Syntax:: Syntax for the commands in the inputrc file. + +* Conditional Init Constructs:: Conditional key bindings in the inputrc file. + +* Sample Init File:: An example inputrc file. +@end menu + +@node Readline Init File Syntax +@subsection Readline Init File Syntax + +There are only a few basic constructs allowed in the +Readline init file. Blank lines are ignored. +Lines beginning with a @samp{#} are comments. +Lines beginning with a @samp{$} indicate conditional +constructs (@pxref{Conditional Init Constructs}). Other lines +denote variable settings and key bindings. + +@table @asis +@item Variable Settings +You can modify the run-time behavior of Readline by +altering the values of variables in Readline +using the @code{set} command within the init file. +The syntax is simple: + +@example +set @var{variable} @var{value} +@end example + +@noindent +Here, for example, is how to +change from the default Emacs-like key binding to use +@code{vi} line editing commands: + +@example +set editing-mode vi +@end example + +Variable names and values, where appropriate, are recognized without regard +to case. Unrecognized variable names are ignored. + +Boolean variables (those that can be set to on or off) are set to on if +the value is null or empty, @var{on} (case-insensitive), or 1. Any other +value results in the variable being set to off. + +@ifset BashFeatures +The @w{@code{bind -V}} command lists the current Readline variable names +and values. @xref{Bash Builtins}. +@end ifset + +A great deal of run-time behavior is changeable with the following +variables. + +@cindex variables, readline +@table @code + +@item bell-style +@vindex bell-style +Controls what happens when Readline wants to ring the terminal bell. +If set to @samp{none}, Readline never rings the bell. If set to +@samp{visible}, Readline uses a visible bell if one is available. +If set to @samp{audible} (the default), Readline attempts to ring +the terminal's bell. + +@item bind-tty-special-chars +@vindex bind-tty-special-chars +If set to @samp{on} (the default), Readline attempts to bind the control +characters treated specially by the kernel's terminal driver to their +Readline equivalents. + +@item blink-matching-paren +@vindex blink-matching-paren +If set to @samp{on}, Readline attempts to briefly move the cursor to an +opening parenthesis when a closing parenthesis is inserted. The default +is @samp{off}. + +@item colored-completion-prefix +@vindex colored-completion-prefix +If set to @samp{on}, when listing completions, Readline displays the +common prefix of the set of possible completions using a different color. +The color definitions are taken from the value of the @env{LS_COLORS} +environment variable. +The default is @samp{off}. + +@item colored-stats +@vindex colored-stats +If set to @samp{on}, Readline displays possible completions using different +colors to indicate their file type. +The color definitions are taken from the value of the @env{LS_COLORS} +environment variable. +The default is @samp{off}. + +@item comment-begin +@vindex comment-begin +The string to insert at the beginning of the line when the +@code{insert-comment} command is executed. The default value +is @code{"#"}. + +@item completion-display-width +@vindex completion-display-width +The number of screen columns used to display possible matches +when performing completion. +The value is ignored if it is less than 0 or greater than the terminal +screen width. +A value of 0 will cause matches to be displayed one per line. +The default value is -1. + +@item completion-ignore-case +@vindex completion-ignore-case +If set to @samp{on}, Readline performs filename matching and completion +in a case-insensitive fashion. +The default value is @samp{off}. + +@item completion-map-case +@vindex completion-map-case +If set to @samp{on}, and @var{completion-ignore-case} is enabled, Readline +treats hyphens (@samp{-}) and underscores (@samp{_}) as equivalent when +performing case-insensitive filename matching and completion. +The default value is @samp{off}. + +@item completion-prefix-display-length +@vindex completion-prefix-display-length +The length in characters of the common prefix of a list of possible +completions that is displayed without modification. When set to a +value greater than zero, common prefixes longer than this value are +replaced with an ellipsis when displaying possible completions. + +@item completion-query-items +@vindex completion-query-items +The number of possible completions that determines when the user is +asked whether the list of possibilities should be displayed. +If the number of possible completions is greater than this value, +Readline will ask the user whether or not he wishes to view +them; otherwise, they are simply listed. +This variable must be set to an integer value greater than or equal to 0. +A negative value means Readline should never ask. +The default limit is @code{100}. + +@item convert-meta +@vindex convert-meta +If set to @samp{on}, Readline will convert characters with the +eighth bit set to an @sc{ascii} key sequence by stripping the eighth +bit and prefixing an @key{ESC} character, converting them to a +meta-prefixed key sequence. The default value is @samp{on}, but +will be set to @samp{off} if the locale is one that contains +eight-bit characters. + +@item disable-completion +@vindex disable-completion +If set to @samp{On}, Readline will inhibit word completion. +Completion characters will be inserted into the line as if they had +been mapped to @code{self-insert}. The default is @samp{off}. + +@item echo-control-characters +@vindex echo-control-characters +When set to @samp{on}, on operating systems that indicate they support it, +readline echoes a character corresponding to a signal generated from the +keyboard. The default is @samp{on}. + +@item editing-mode +@vindex editing-mode +The @code{editing-mode} variable controls which default set of +key bindings is used. By default, Readline starts up in Emacs editing +mode, where the keystrokes are most similar to Emacs. This variable can be +set to either @samp{emacs} or @samp{vi}. + +@item emacs-mode-string +@vindex emacs-mode-string +If the @var{show-mode-in-prompt} variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when emacs editing mode is active. The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +The default is @samp{@@}. + +@item enable-bracketed-paste +@vindex enable-bracketed-paste +When set to @samp{On}, Readline will configure the terminal in a way +that will enable it to insert each paste into the editing buffer as a +single string of characters, instead of treating each character as if +it had been read from the keyboard. This can prevent pasted characters +from being interpreted as editing commands. The default is @samp{off}. + +@item enable-keypad +@vindex enable-keypad +When set to @samp{on}, Readline will try to enable the application +keypad when it is called. Some systems need this to enable the +arrow keys. The default is @samp{off}. + +@item enable-meta-key +When set to @samp{on}, Readline will try to enable any meta modifier +key the terminal claims to support when it is called. On many terminals, +the meta key is used to send eight-bit characters. +The default is @samp{on}. + +@item expand-tilde +@vindex expand-tilde +If set to @samp{on}, tilde expansion is performed when Readline +attempts word completion. The default is @samp{off}. + +@item history-preserve-point +@vindex history-preserve-point +If set to @samp{on}, the history code attempts to place the point (the +current cursor position) at the +same location on each history line retrieved with @code{previous-history} +or @code{next-history}. The default is @samp{off}. + +@item history-size +@vindex history-size +Set the maximum number of history entries saved in the history list. +If set to zero, any existing history entries are deleted and no new entries +are saved. +If set to a value less than zero, the number of history entries is not +limited. +By default, the number of history entries is not limited. +If an attempt is made to set @var{history-size} to a non-numeric value, +the maximum number of history entries will be set to 500. + +@item horizontal-scroll-mode +@vindex horizontal-scroll-mode +This variable can be set to either @samp{on} or @samp{off}. Setting it +to @samp{on} means that the text of the lines being edited will scroll +horizontally on a single screen line when they are longer than the width +of the screen, instead of wrapping onto a new screen line. By default, +this variable is set to @samp{off}. + +@item input-meta +@vindex input-meta +@vindex meta-flag +If set to @samp{on}, Readline will enable eight-bit input (it +will not clear the eighth bit in the characters it reads), +regardless of what the terminal claims it can support. The +default value is @samp{off}, but Readline will set it to @samp{on} if the +locale contains eight-bit characters. +The name @code{meta-flag} is a synonym for this variable. + +@item isearch-terminators +@vindex isearch-terminators +The string of characters that should terminate an incremental search without +subsequently executing the character as a command (@pxref{Searching}). +If this variable has not been given a value, the characters @key{ESC} and +@kbd{C-J} will terminate an incremental search. + +@item keymap +@vindex keymap +Sets Readline's idea of the current keymap for key binding commands. +Built-in @code{keymap} names are +@code{emacs}, +@code{emacs-standard}, +@code{emacs-meta}, +@code{emacs-ctlx}, +@code{vi}, +@code{vi-move}, +@code{vi-command}, and +@code{vi-insert}. +@code{vi} is equivalent to @code{vi-command} (@code{vi-move} is also a +synonym); @code{emacs} is equivalent to @code{emacs-standard}. +Applications may add additional names. +The default value is @code{emacs}. +The value of the @code{editing-mode} variable also affects the +default keymap. + +@item keyseq-timeout +Specifies the duration Readline will wait for a character when reading an +ambiguous key sequence (one that can form a complete key sequence using +the input read so far, or can take additional input to complete a longer +key sequence). +If no input is received within the timeout, Readline will use the shorter +but complete key sequence. +Readline uses this value to determine whether or not input is +available on the current input source (@code{rl_instream} by default). +The value is specified in milliseconds, so a value of 1000 means that +Readline will wait one second for additional input. +If this variable is set to a value less than or equal to zero, or to a +non-numeric value, Readline will wait until another key is pressed to +decide which key sequence to complete. +The default value is @code{500}. + +@item mark-directories +If set to @samp{on}, completed directory names have a slash +appended. The default is @samp{on}. + +@item mark-modified-lines +@vindex mark-modified-lines +This variable, when set to @samp{on}, causes Readline to display an +asterisk (@samp{*}) at the start of history lines which have been modified. +This variable is @samp{off} by default. + +@item mark-symlinked-directories +@vindex mark-symlinked-directories +If set to @samp{on}, completed names which are symbolic links +to directories have a slash appended (subject to the value of +@code{mark-directories}). +The default is @samp{off}. + +@item match-hidden-files +@vindex match-hidden-files +This variable, when set to @samp{on}, causes Readline to match files whose +names begin with a @samp{.} (hidden files) when performing filename +completion. +If set to @samp{off}, the leading @samp{.} must be +supplied by the user in the filename to be completed. +This variable is @samp{on} by default. + +@item menu-complete-display-prefix +@vindex menu-complete-display-prefix +If set to @samp{on}, menu completion displays the common prefix of the +list of possible completions (which may be empty) before cycling through +the list. The default is @samp{off}. + +@item output-meta +@vindex output-meta +If set to @samp{on}, Readline will display characters with the +eighth bit set directly rather than as a meta-prefixed escape +sequence. +The default is @samp{off}, but Readline will set it to @samp{on} if the +locale contains eight-bit characters. + +@item page-completions +@vindex page-completions +If set to @samp{on}, Readline uses an internal @code{more}-like pager +to display a screenful of possible completions at a time. +This variable is @samp{on} by default. + +@item print-completions-horizontally +If set to @samp{on}, Readline will display completions with matches +sorted horizontally in alphabetical order, rather than down the screen. +The default is @samp{off}. + +@item revert-all-at-newline +@vindex revert-all-at-newline +If set to @samp{on}, Readline will undo all changes to history lines +before returning when @code{accept-line} is executed. By default, +history lines may be modified and retain individual undo lists across +calls to @code{readline}. The default is @samp{off}. + +@item show-all-if-ambiguous +@vindex show-all-if-ambiguous +This alters the default behavior of the completion functions. If +set to @samp{on}, +words which have more than one possible completion cause the +matches to be listed immediately instead of ringing the bell. +The default value is @samp{off}. + +@item show-all-if-unmodified +@vindex show-all-if-unmodified +This alters the default behavior of the completion functions in +a fashion similar to @var{show-all-if-ambiguous}. +If set to @samp{on}, +words which have more than one possible completion without any +possible partial completion (the possible completions don't share +a common prefix) cause the matches to be listed immediately instead +of ringing the bell. +The default value is @samp{off}. + +@item show-mode-in-prompt +@vindex show-mode-in-prompt +If set to @samp{on}, add a string to the beginning of the prompt +indicating the editing mode: emacs, vi command, or vi insertion. +The mode strings are user-settable (e.g., @var{emacs-mode-string}). +The default value is @samp{off}. + +@item skip-completed-text +@vindex skip-completed-text +If set to @samp{on}, this alters the default completion behavior when +inserting a single match into the line. It's only active when +performing completion in the middle of a word. If enabled, readline +does not insert characters from the completion that match characters +after point in the word being completed, so portions of the word +following the cursor are not duplicated. +For instance, if this is enabled, attempting completion when the cursor +is after the @samp{e} in @samp{Makefile} will result in @samp{Makefile} +rather than @samp{Makefilefile}, assuming there is a single possible +completion. +The default value is @samp{off}. + +@item vi-cmd-mode-string +@vindex vi-cmd-mode-string +If the @var{show-mode-in-prompt} variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in command mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +The default is @samp{(cmd)}. + +@item vi-ins-mode-string +@vindex vi-ins-mode-string +If the @var{show-mode-in-prompt} variable is enabled, +this string is displayed immediately before the last line of the primary +prompt when vi editing mode is active and in insertion mode. +The value is expanded like a +key binding, so the standard set of meta- and control prefixes and +backslash escape sequences is available. +Use the @samp{\1} and @samp{\2} escapes to begin and end sequences of +non-printing characters, which can be used to embed a terminal control +sequence into the mode string. +The default is @samp{(ins)}. + +@item visible-stats +@vindex visible-stats +If set to @samp{on}, a character denoting a file's type +is appended to the filename when listing possible +completions. The default is @samp{off}. + +@end table + +@item Key Bindings +The syntax for controlling key bindings in the init file is +simple. First you need to find the name of the command that you +want to change. The following sections contain tables of the command +name, the default keybinding, if any, and a short description of what +the command does. + +Once you know the name of the command, simply place on a line +in the init file the name of the key +you wish to bind the command to, a colon, and then the name of the +command. +There can be no space between the key name and the colon -- that will be +interpreted as part of the key name. +The name of the key can be expressed in different ways, depending on +what you find most comfortable. + +In addition to command names, readline allows keys to be bound +to a string that is inserted when the key is pressed (a @var{macro}). + +@ifset BashFeatures +The @w{@code{bind -p}} command displays Readline function names and +bindings in a format that can put directly into an initialization file. +@xref{Bash Builtins}. +@end ifset + +@table @asis +@item @w{@var{keyname}: @var{function-name} or @var{macro}} +@var{keyname} is the name of a key spelled out in English. For example: +@example +Control-u: universal-argument +Meta-Rubout: backward-kill-word +Control-o: "> output" +@end example + +In the example above, @kbd{C-u} is bound to the function +@code{universal-argument}, +@kbd{M-DEL} is bound to the function @code{backward-kill-word}, and +@kbd{C-o} is bound to run the macro +expressed on the right hand side (that is, to insert the text +@samp{> output} into the line). + +A number of symbolic character names are recognized while +processing this key binding syntax: +@var{DEL}, +@var{ESC}, +@var{ESCAPE}, +@var{LFD}, +@var{NEWLINE}, +@var{RET}, +@var{RETURN}, +@var{RUBOUT}, +@var{SPACE}, +@var{SPC}, +and +@var{TAB}. + +@item @w{"@var{keyseq}": @var{function-name} or @var{macro}} +@var{keyseq} differs from @var{keyname} above in that strings +denoting an entire key sequence can be specified, by placing +the key sequence in double quotes. Some @sc{gnu} Emacs style key +escapes can be used, as in the following example, but the +special character names are not recognized. + +@example +"\C-u": universal-argument +"\C-x\C-r": re-read-init-file +"\e[11~": "Function Key 1" +@end example + +In the above example, @kbd{C-u} is again bound to the function +@code{universal-argument} (just as it was in the first example), +@samp{@kbd{C-x} @kbd{C-r}} is bound to the function @code{re-read-init-file}, +and @samp{@key{ESC} @key{[} @key{1} @key{1} @key{~}} is bound to insert +the text @samp{Function Key 1}. + +@end table + +The following @sc{gnu} Emacs style escape sequences are available when +specifying key sequences: + +@table @code +@item @kbd{\C-} +control prefix +@item @kbd{\M-} +meta prefix +@item @kbd{\e} +an escape character +@item @kbd{\\} +backslash +@item @kbd{\"} +@key{"}, a double quotation mark +@item @kbd{\'} +@key{'}, a single quote or apostrophe +@end table + +In addition to the @sc{gnu} Emacs style escape sequences, a second +set of backslash escapes is available: + +@table @code +@item \a +alert (bell) +@item \b +backspace +@item \d +delete +@item \f +form feed +@item \n +newline +@item \r +carriage return +@item \t +horizontal tab +@item \v +vertical tab +@item \@var{nnn} +the eight-bit character whose value is the octal value @var{nnn} +(one to three digits) +@item \x@var{HH} +the eight-bit character whose value is the hexadecimal value @var{HH} +(one or two hex digits) +@end table + +When entering the text of a macro, single or double quotes must +be used to indicate a macro definition. +Unquoted text is assumed to be a function name. +In the macro body, the backslash escapes described above are expanded. +Backslash will quote any other character in the macro text, +including @samp{"} and @samp{'}. +For example, the following binding will make @samp{@kbd{C-x} \} +insert a single @samp{\} into the line: +@example +"\C-x\\": "\\" +@end example + +@end table + +@node Conditional Init Constructs +@subsection Conditional Init Constructs + +Readline implements a facility similar in spirit to the conditional +compilation features of the C preprocessor which allows key +bindings and variable settings to be performed as the result +of tests. There are four parser directives used. + +@table @code +@item $if +The @code{$if} construct allows bindings to be made based on the +editing mode, the terminal being used, or the application using +Readline. The text of the test, after any comparison operator, +extends to the end of the line; +unless otherwise noted, no characters are required to isolate it. + +@table @code +@item mode +The @code{mode=} form of the @code{$if} directive is used to test +whether Readline is in @code{emacs} or @code{vi} mode. +This may be used in conjunction +with the @samp{set keymap} command, for instance, to set bindings in +the @code{emacs-standard} and @code{emacs-ctlx} keymaps only if +Readline is starting out in @code{emacs} mode. + +@item term +The @code{term=} form may be used to include terminal-specific +key bindings, perhaps to bind the key sequences output by the +terminal's function keys. The word on the right side of the +@samp{=} is tested against both the full name of the terminal and +the portion of the terminal name before the first @samp{-}. This +allows @code{sun} to match both @code{sun} and @code{sun-cmd}, +for instance. + +@item version +The @code{version} test may be used to perform comparisons against +specific Readline versions. +The @code{version} expands to the current Readline version. +The set of comparison operators includes +@samp{=} (and @samp{==}), @samp{!=}, @samp{<=}, @samp{>=}, @samp{<}, +and @samp{>}. +The version number supplied on the right side of the operator consists +of a major version number, an optional decimal point, and an optional +minor version (e.g., @samp{7.1}). If the minor version is omitted, it +is assumed to be @samp{0}. +The operator may be separated from the string @code{version} and +from the version number argument by whitespace. +The following example sets a variable if the Readline version being used +is 7.0 or newer: +@example +$if version >= 7.0 +set show-mode-in-prompt on +$endif +@end example + +@item application +The @var{application} construct is used to include +application-specific settings. Each program using the Readline +library sets the @var{application name}, and you can test for +a particular value. +This could be used to bind key sequences to functions useful for +a specific program. For instance, the following command adds a +key sequence that quotes the current or previous word in Bash: +@example +$if Bash +# Quote the current or previous word +"\C-xq": "\eb\"\ef\"" +$endif +@end example + +@item variable +The @var{variable} construct provides simple equality tests for Readline +variables and values. +The permitted comparison operators are @samp{=}, @samp{==}, and @samp{!=}. +The variable name must be separated from the comparison operator by +whitespace; the operator may be separated from the value on the right hand +side by whitespace. +Both string and boolean variables may be tested. Boolean variables must be +tested against the values @var{on} and @var{off}. +The following example is equivalent to the @code{mode=emacs} test described +above: +@example +$if editing-mode == emacs +set show-mode-in-prompt on +$endif +@end example +@end table + +@item $endif +This command, as seen in the previous example, terminates an +@code{$if} command. + +@item $else +Commands in this branch of the @code{$if} directive are executed if +the test fails. + +@item $include +This directive takes a single filename as an argument and reads commands +and bindings from that file. +For example, the following directive reads from @file{/etc/inputrc}: +@example +$include /etc/inputrc +@end example +@end table + +@node Sample Init File +@subsection Sample Init File + +Here is an example of an @var{inputrc} file. This illustrates key +binding, variable assignment, and conditional syntax. + +@example +@page +# This file controls the behaviour of line input editing for +# programs that use the GNU Readline library. Existing +# programs include FTP, Bash, and GDB. +# +# You can re-read the inputrc file with C-x C-r. +# Lines beginning with '#' are comments. +# +# First, include any system-wide bindings and variable +# assignments from /etc/Inputrc +$include /etc/Inputrc + +# +# Set various bindings for emacs mode. + +set editing-mode emacs + +$if mode=emacs + +Meta-Control-h: backward-kill-word Text after the function name is ignored + +# +# Arrow keys in keypad mode +# +#"\M-OD": backward-char +#"\M-OC": forward-char +#"\M-OA": previous-history +#"\M-OB": next-history +# +# Arrow keys in ANSI mode +# +"\M-[D": backward-char +"\M-[C": forward-char +"\M-[A": previous-history +"\M-[B": next-history +# +# Arrow keys in 8 bit keypad mode +# +#"\M-\C-OD": backward-char +#"\M-\C-OC": forward-char +#"\M-\C-OA": previous-history +#"\M-\C-OB": next-history +# +# Arrow keys in 8 bit ANSI mode +# +#"\M-\C-[D": backward-char +#"\M-\C-[C": forward-char +#"\M-\C-[A": previous-history +#"\M-\C-[B": next-history + +C-q: quoted-insert + +$endif + +# An old-style binding. This happens to be the default. +TAB: complete + +# Macros that are convenient for shell interaction +$if Bash +# edit the path +"\C-xp": "PATH=$@{PATH@}\e\C-e\C-a\ef\C-f" +# prepare to type a quoted word -- +# insert open and close double quotes +# and move to just after the open quote +"\C-x\"": "\"\"\C-b" +# insert a backslash (testing backslash escapes +# in sequences and macros) +"\C-x\\": "\\" +# Quote the current or previous word +"\C-xq": "\eb\"\ef\"" +# Add a binding to refresh the line, which is unbound +"\C-xr": redraw-current-line +# Edit variable on current line. +"\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y=" +$endif + +# use a visible bell if one is available +set bell-style visible + +# don't strip characters to 7 bits when reading +set input-meta on + +# allow iso-latin1 characters to be inserted rather +# than converted to prefix-meta sequences +set convert-meta off + +# display characters with the eighth bit set directly +# rather than as meta-prefixed characters +set output-meta on + +# if there are more than 150 possible completions for +# a word, ask the user if he wants to see all of them +set completion-query-items 150 + +# For FTP +$if Ftp +"\C-xg": "get \M-?" +"\C-xt": "put \M-?" +"\M-.": yank-last-arg +$endif +@end example + +@node Bindable Readline Commands +@section Bindable Readline Commands + +@menu +* Commands For Moving:: Moving about the line. +* Commands For History:: Getting at previous lines. +* Commands For Text:: Commands for changing text. +* Commands For Killing:: Commands for killing and yanking. +* Numeric Arguments:: Specifying numeric arguments, repeat counts. +* Commands For Completion:: Getting Readline to do the typing for you. +* Keyboard Macros:: Saving and re-executing typed characters +* Miscellaneous Commands:: Other miscellaneous commands. +@end menu + +This section describes Readline commands that may be bound to key +sequences. +@ifset BashFeatures +You can list your key bindings by executing +@w{@code{bind -P}} or, for a more terse format, suitable for an +@var{inputrc} file, @w{@code{bind -p}}. (@xref{Bash Builtins}.) +@end ifset +Command names without an accompanying key sequence are unbound by default. + +In the following descriptions, @dfn{point} refers to the current cursor +position, and @dfn{mark} refers to a cursor position saved by the +@code{set-mark} command. +The text between the point and mark is referred to as the @dfn{region}. + +@node Commands For Moving +@subsection Commands For Moving +@ftable @code +@item beginning-of-line (C-a) +Move to the start of the current line. + +@item end-of-line (C-e) +Move to the end of the line. + +@item forward-char (C-f) +Move forward a character. + +@item backward-char (C-b) +Move back a character. + +@item forward-word (M-f) +Move forward to the end of the next word. +Words are composed of letters and digits. + +@item backward-word (M-b) +Move back to the start of the current or previous word. +Words are composed of letters and digits. + +@ifset BashFeatures +@item shell-forward-word () +Move forward to the end of the next word. +Words are delimited by non-quoted shell metacharacters. + +@item shell-backward-word () +Move back to the start of the current or previous word. +Words are delimited by non-quoted shell metacharacters. +@end ifset + +@item previous-screen-line () +Attempt to move point to the same physical screen column on the previous +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if point is not +greater than the length of the prompt plus the screen width. + +@item next-screen-line () +Attempt to move point to the same physical screen column on the next +physical screen line. This will not have the desired effect if the current +Readline line does not take up more than one physical line or if the length +of the current Readline line is not greater than the length of the prompt +plus the screen width. + +@item clear-screen (C-l) +Clear the screen and redraw the current line, +leaving the current line at the top of the screen. + +@item redraw-current-line () +Refresh the current line. By default, this is unbound. + +@end ftable + +@node Commands For History +@subsection Commands For Manipulating The History + +@ftable @code +@item accept-line (Newline or Return) +@ifset BashFeatures +Accept the line regardless of where the cursor is. +If this line is +non-empty, add it to the history list according to the setting of +the @env{HISTCONTROL} and @env{HISTIGNORE} variables. +If this line is a modified history line, then restore the history line +to its original state. +@end ifset +@ifclear BashFeatures +Accept the line regardless of where the cursor is. +If this line is +non-empty, it may be added to the history list for future recall with +@code{add_history()}. +If this line is a modified history line, the history line is restored +to its original state. +@end ifclear + +@item previous-history (C-p) +Move `back' through the history list, fetching the previous command. + +@item next-history (C-n) +Move `forward' through the history list, fetching the next command. + +@item beginning-of-history (M-<) +Move to the first line in the history. + +@item end-of-history (M->) +Move to the end of the input history, i.e., the line currently +being entered. + +@item reverse-search-history (C-r) +Search backward starting at the current line and moving `up' through +the history as necessary. This is an incremental search. + +@item forward-search-history (C-s) +Search forward starting at the current line and moving `down' through +the history as necessary. This is an incremental search. + +@item non-incremental-reverse-search-history (M-p) +Search backward starting at the current line and moving `up' +through the history as necessary using a non-incremental search +for a string supplied by the user. +The search string may match anywhere in a history line. + +@item non-incremental-forward-search-history (M-n) +Search forward starting at the current line and moving `down' +through the history as necessary using a non-incremental search +for a string supplied by the user. +The search string may match anywhere in a history line. + +@item history-search-forward () +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string must match at the beginning of a history line. +This is a non-incremental search. +By default, this command is unbound. + +@item history-search-backward () +Search backward through the history for the string of characters +between the start of the current line and the point. +The search string must match at the beginning of a history line. +This is a non-incremental search. +By default, this command is unbound. + +@item history-substring-search-forward () +Search forward through the history for the string of characters +between the start of the current line and the point. +The search string may match anywhere in a history line. +This is a non-incremental search. +By default, this command is unbound. + +@item history-substring-search-backward () +Search backward through the history for the string of characters +between the start of the current line and the point. +The search string may match anywhere in a history line. +This is a non-incremental search. +By default, this command is unbound. + +@item yank-nth-arg (M-C-y) +Insert the first argument to the previous command (usually +the second word on the previous line) at point. +With an argument @var{n}, +insert the @var{n}th word from the previous command (the words +in the previous command begin with word 0). A negative argument +inserts the @var{n}th word from the end of the previous command. +Once the argument @var{n} is computed, the argument is extracted +as if the @samp{!@var{n}} history expansion had been specified. + +@item yank-last-arg (M-. or M-_) +Insert last argument to the previous command (the last word of the +previous history entry). +With a numeric argument, behave exactly like @code{yank-nth-arg}. +Successive calls to @code{yank-last-arg} move back through the history +list, inserting the last word (or the word specified by the argument to +the first call) of each line in turn. +Any numeric argument supplied to these successive calls determines +the direction to move through the history. A negative argument switches +the direction through the history (back or forward). +The history expansion facilities are used to extract the last argument, +as if the @samp{!$} history expansion had been specified. + +@end ftable + +@node Commands For Text +@subsection Commands For Changing Text + +@ftable @code + +@item @i{end-of-file} (usually C-d) +The character indicating end-of-file as set, for example, by +@code{stty}. If this character is read when there are no characters +on the line, and point is at the beginning of the line, Readline +interprets it as the end of input and returns @sc{eof}. + +@item delete-char (C-d) +Delete the character at point. If this function is bound to the +same character as the tty @sc{eof} character, as @kbd{C-d} +commonly is, see above for the effects. + +@item backward-delete-char (Rubout) +Delete the character behind the cursor. A numeric argument means +to kill the characters instead of deleting them. + +@item forward-backward-delete-char () +Delete the character under the cursor, unless the cursor is at the +end of the line, in which case the character behind the cursor is +deleted. By default, this is not bound to a key. + +@item quoted-insert (C-q or C-v) +Add the next character typed to the line verbatim. This is +how to insert key sequences like @kbd{C-q}, for example. + +@ifclear BashFeatures +@item tab-insert (M-@key{TAB}) +Insert a tab character. +@end ifclear + +@item self-insert (a, b, A, 1, !, @dots{}) +Insert yourself. + +@item bracketed-paste-begin () +This function is intended to be bound to the "bracketed paste" escape +sequence sent by some terminals, and such a binding is assigned by default. +It allows Readline to insert the pasted text as a single unit without treating +each character as if it had been read from the keyboard. The characters +are inserted as if each one was bound to @code{self-insert} instead of +executing any editing commands. + +@item transpose-chars (C-t) +Drag the character before the cursor forward over +the character at the cursor, moving the +cursor forward as well. If the insertion point +is at the end of the line, then this +transposes the last two characters of the line. +Negative arguments have no effect. + +@item transpose-words (M-t) +Drag the word before point past the word after point, +moving point past that word as well. +If the insertion point is at the end of the line, this transposes +the last two words on the line. + +@item upcase-word (M-u) +Uppercase the current (or following) word. With a negative argument, +uppercase the previous word, but do not move the cursor. + +@item downcase-word (M-l) +Lowercase the current (or following) word. With a negative argument, +lowercase the previous word, but do not move the cursor. + +@item capitalize-word (M-c) +Capitalize the current (or following) word. With a negative argument, +capitalize the previous word, but do not move the cursor. + +@item overwrite-mode () +Toggle overwrite mode. With an explicit positive numeric argument, +switches to overwrite mode. With an explicit non-positive numeric +argument, switches to insert mode. This command affects only +@code{emacs} mode; @code{vi} mode does overwrite differently. +Each call to @code{readline()} starts in insert mode. + +In overwrite mode, characters bound to @code{self-insert} replace +the text at point rather than pushing the text to the right. +Characters bound to @code{backward-delete-char} replace the character +before point with a space. + +By default, this command is unbound. + +@end ftable + +@node Commands For Killing +@subsection Killing And Yanking + +@ftable @code + +@item kill-line (C-k) +Kill the text from point to the end of the line. + +@item backward-kill-line (C-x Rubout) +Kill backward from the cursor to the beginning of the current line. + +@item unix-line-discard (C-u) +Kill backward from the cursor to the beginning of the current line. + +@item kill-whole-line () +Kill all characters on the current line, no matter where point is. +By default, this is unbound. + +@item kill-word (M-d) +Kill from point to the end of the current word, or if between +words, to the end of the next word. +Word boundaries are the same as @code{forward-word}. + +@item backward-kill-word (M-@key{DEL}) +Kill the word behind point. +Word boundaries are the same as @code{backward-word}. + +@ifset BashFeatures +@item shell-kill-word () +Kill from point to the end of the current word, or if between +words, to the end of the next word. +Word boundaries are the same as @code{shell-forward-word}. + +@item shell-backward-kill-word () +Kill the word behind point. +Word boundaries are the same as @code{shell-backward-word}. +@end ifset + +@item unix-word-rubout (C-w) +Kill the word behind point, using white space as a word boundary. +The killed text is saved on the kill-ring. + +@item unix-filename-rubout () +Kill the word behind point, using white space and the slash character +as the word boundaries. +The killed text is saved on the kill-ring. + +@item delete-horizontal-space () +Delete all spaces and tabs around point. By default, this is unbound. + +@item kill-region () +Kill the text in the current region. +By default, this command is unbound. + +@item copy-region-as-kill () +Copy the text in the region to the kill buffer, so it can be yanked +right away. By default, this command is unbound. + +@item copy-backward-word () +Copy the word before point to the kill buffer. +The word boundaries are the same as @code{backward-word}. +By default, this command is unbound. + +@item copy-forward-word () +Copy the word following point to the kill buffer. +The word boundaries are the same as @code{forward-word}. +By default, this command is unbound. + +@item yank (C-y) +Yank the top of the kill ring into the buffer at point. + +@item yank-pop (M-y) +Rotate the kill-ring, and yank the new top. You can only do this if +the prior command is @code{yank} or @code{yank-pop}. +@end ftable + +@node Numeric Arguments +@subsection Specifying Numeric Arguments +@ftable @code + +@item digit-argument (@kbd{M-0}, @kbd{M-1}, @dots{} @kbd{M--}) +Add this digit to the argument already accumulating, or start a new +argument. @kbd{M--} starts a negative argument. + +@item universal-argument () +This is another way to specify an argument. +If this command is followed by one or more digits, optionally with a +leading minus sign, those digits define the argument. +If the command is followed by digits, executing @code{universal-argument} +again ends the numeric argument, but is otherwise ignored. +As a special case, if this command is immediately followed by a +character that is neither a digit nor minus sign, the argument count +for the next command is multiplied by four. +The argument count is initially one, so executing this function the +first time makes the argument count four, a second time makes the +argument count sixteen, and so on. +By default, this is not bound to a key. +@end ftable + +@node Commands For Completion +@subsection Letting Readline Type For You + +@ftable @code +@item complete (@key{TAB}) +Attempt to perform completion on the text before point. +The actual completion performed is application-specific. +@ifset BashFeatures +Bash attempts completion treating the text as a variable (if the +text begins with @samp{$}), username (if the text begins with +@samp{~}), hostname (if the text begins with @samp{@@}), or +command (including aliases and functions) in turn. If none +of these produces a match, filename completion is attempted. +@end ifset +@ifclear BashFeatures +The default is filename completion. +@end ifclear + +@item possible-completions (M-?) +List the possible completions of the text before point. +When displaying completions, Readline sets the number of columns used +for display to the value of @code{completion-display-width}, the value of +the environment variable @env{COLUMNS}, or the screen width, in that order. + +@item insert-completions (M-*) +Insert all completions of the text before point that would have +been generated by @code{possible-completions}. + +@item menu-complete () +Similar to @code{complete}, but replaces the word to be completed +with a single match from the list of possible completions. +Repeated execution of @code{menu-complete} steps through the list +of possible completions, inserting each match in turn. +At the end of the list of completions, the bell is rung +(subject to the setting of @code{bell-style}) +and the original text is restored. +An argument of @var{n} moves @var{n} positions forward in the list +of matches; a negative argument may be used to move backward +through the list. +This command is intended to be bound to @key{TAB}, but is unbound +by default. + +@item menu-complete-backward () +Identical to @code{menu-complete}, but moves backward through the list +of possible completions, as if @code{menu-complete} had been given a +negative argument. + +@item delete-char-or-list () +Deletes the character under the cursor if not at the beginning or +end of the line (like @code{delete-char}). +If at the end of the line, behaves identically to +@code{possible-completions}. +This command is unbound by default. + +@ifset BashFeatures +@item complete-filename (M-/) +Attempt filename completion on the text before point. + +@item possible-filename-completions (C-x /) +List the possible completions of the text before point, +treating it as a filename. + +@item complete-username (M-~) +Attempt completion on the text before point, treating +it as a username. + +@item possible-username-completions (C-x ~) +List the possible completions of the text before point, +treating it as a username. + +@item complete-variable (M-$) +Attempt completion on the text before point, treating +it as a shell variable. + +@item possible-variable-completions (C-x $) +List the possible completions of the text before point, +treating it as a shell variable. + +@item complete-hostname (M-@@) +Attempt completion on the text before point, treating +it as a hostname. + +@item possible-hostname-completions (C-x @@) +List the possible completions of the text before point, +treating it as a hostname. + +@item complete-command (M-!) +Attempt completion on the text before point, treating +it as a command name. Command completion attempts to +match the text against aliases, reserved words, shell +functions, shell builtins, and finally executable filenames, +in that order. + +@item possible-command-completions (C-x !) +List the possible completions of the text before point, +treating it as a command name. + +@item dynamic-complete-history (M-@key{TAB}) +Attempt completion on the text before point, comparing +the text against lines from the history list for possible +completion matches. + +@item dabbrev-expand () +Attempt menu completion on the text before point, comparing +the text against lines from the history list for possible +completion matches. + +@item complete-into-braces (M-@{) +Perform filename completion and insert the list of possible completions +enclosed within braces so the list is available to the shell +(@pxref{Brace Expansion}). + +@end ifset +@end ftable + +@node Keyboard Macros +@subsection Keyboard Macros +@ftable @code + +@item start-kbd-macro (C-x () +Begin saving the characters typed into the current keyboard macro. + +@item end-kbd-macro (C-x )) +Stop saving the characters typed into the current keyboard macro +and save the definition. + +@item call-last-kbd-macro (C-x e) +Re-execute the last keyboard macro defined, by making the characters +in the macro appear as if typed at the keyboard. + +@item print-last-kbd-macro () +Print the last keboard macro defined in a format suitable for the +@var{inputrc} file. + +@end ftable + +@node Miscellaneous Commands +@subsection Some Miscellaneous Commands +@ftable @code + +@item re-read-init-file (C-x C-r) +Read in the contents of the @var{inputrc} file, and incorporate +any bindings or variable assignments found there. + +@item abort (C-g) +Abort the current editing command and +ring the terminal's bell (subject to the setting of +@code{bell-style}). + +@item do-lowercase-version (M-A, M-B, M-@var{x}, @dots{}) +If the metafied character @var{x} is upper case, run the command +that is bound to the corresponding metafied lower case character. +The behavior is undefined if @var{x} is already lower case. + +@item prefix-meta (@key{ESC}) +Metafy the next character typed. This is for keyboards +without a meta key. Typing @samp{@key{ESC} f} is equivalent to typing +@kbd{M-f}. + +@item undo (C-_ or C-x C-u) +Incremental undo, separately remembered for each line. + +@item revert-line (M-r) +Undo all changes made to this line. This is like executing the @code{undo} +command enough times to get back to the beginning. + +@ifset BashFeatures +@item tilde-expand (M-&) +@end ifset +@ifclear BashFeatures +@item tilde-expand (M-~) +@end ifclear +Perform tilde expansion on the current word. + +@item set-mark (C-@@) +Set the mark to the point. If a +numeric argument is supplied, the mark is set to that position. + +@item exchange-point-and-mark (C-x C-x) +Swap the point with the mark. The current cursor position is set to +the saved position, and the old cursor position is saved as the mark. + +@item character-search (C-]) +A character is read and point is moved to the next occurrence of that +character. A negative count searches for previous occurrences. + +@item character-search-backward (M-C-]) +A character is read and point is moved to the previous occurrence +of that character. A negative count searches for subsequent +occurrences. + +@item skip-csi-sequence () +Read enough characters to consume a multi-key sequence such as those +defined for keys like Home and End. Such sequences begin with a +Control Sequence Indicator (CSI), usually ESC-[. If this sequence is +bound to "\e[", keys producing such sequences will have no effect +unless explicitly bound to a readline command, instead of inserting +stray characters into the editing buffer. This is unbound by default, +but usually bound to ESC-[. + +@item insert-comment (M-#) +Without a numeric argument, the value of the @code{comment-begin} +variable is inserted at the beginning of the current line. +If a numeric argument is supplied, this command acts as a toggle: if +the characters at the beginning of the line do not match the value +of @code{comment-begin}, the value is inserted, otherwise +the characters in @code{comment-begin} are deleted from the beginning of +the line. +In either case, the line is accepted as if a newline had been typed. +@ifset BashFeatures +The default value of @code{comment-begin} causes this command +to make the current line a shell comment. +If a numeric argument causes the comment character to be removed, the line +will be executed by the shell. +@end ifset + +@item dump-functions () +Print all of the functions and their key bindings to the +Readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@item dump-variables () +Print all of the settable variables and their values to the +Readline output stream. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@item dump-macros () +Print all of the Readline key sequences bound to macros and the +strings they output. If a numeric argument is supplied, +the output is formatted in such a way that it can be made part +of an @var{inputrc} file. This command is unbound by default. + +@ifset BashFeatures +@item glob-complete-word (M-g) +The word before point is treated as a pattern for pathname expansion, +with an asterisk implicitly appended. This pattern is used to +generate a list of matching file names for possible completions. + +@item glob-expand-word (C-x *) +The word before point is treated as a pattern for pathname expansion, +and the list of matching file names is inserted, replacing the word. +If a numeric argument is supplied, a @samp{*} is appended before +pathname expansion. + +@item glob-list-expansions (C-x g) +The list of expansions that would have been generated by +@code{glob-expand-word} is displayed, and the line is redrawn. +If a numeric argument is supplied, a @samp{*} is appended before +pathname expansion. + +@item display-shell-version (C-x C-v) +Display version information about the current instance of Bash. + +@item shell-expand-line (M-C-e) +Expand the line as the shell does. +This performs alias and history expansion as well as all of the shell +word expansions (@pxref{Shell Expansions}). + +@item history-expand-line (M-^) +Perform history expansion on the current line. + +@item magic-space () +Perform history expansion on the current line and insert a space +(@pxref{History Interaction}). + +@item alias-expand-line () +Perform alias expansion on the current line (@pxref{Aliases}). + +@item history-and-alias-expand-line () +Perform history and alias expansion on the current line. + +@item insert-last-argument (M-. or M-_) +A synonym for @code{yank-last-arg}. + +@item operate-and-get-next (C-o) +Accept the current line for execution and fetch the next line +relative to the current line from the history for editing. +A numeric argument, if supplied, specifies the history entry to use instead +of the current line. + +@item edit-and-execute-command (C-x C-e) +Invoke an editor on the current command line, and execute the result as shell +commands. +Bash attempts to invoke +@code{$VISUAL}, @code{$EDITOR}, and @code{emacs} +as the editor, in that order. + +@end ifset + +@ifclear BashFeatures +@item emacs-editing-mode (C-e) +When in @code{vi} command mode, this causes a switch to @code{emacs} +editing mode. + +@item vi-editing-mode (M-C-j) +When in @code{emacs} editing mode, this causes a switch to @code{vi} +editing mode. + +@end ifclear + +@end ftable + +@node Readline vi Mode +@section Readline vi Mode + +While the Readline library does not have a full set of @code{vi} +editing functions, it does contain enough to allow simple editing +of the line. The Readline @code{vi} mode behaves as specified in +the @sc{posix} standard. + +@ifset BashFeatures +In order to switch interactively between @code{emacs} and @code{vi} +editing modes, use the @samp{set -o emacs} and @samp{set -o vi} +commands (@pxref{The Set Builtin}). +@end ifset +@ifclear BashFeatures +In order to switch interactively between @code{emacs} and @code{vi} +editing modes, use the command @kbd{M-C-j} (bound to emacs-editing-mode +when in @code{vi} mode and to vi-editing-mode in @code{emacs} mode). +@end ifclear +The Readline default is @code{emacs} mode. + +When you enter a line in @code{vi} mode, you are already placed in +`insertion' mode, as if you had typed an @samp{i}. Pressing @key{ESC} +switches you into `command' mode, where you can edit the text of the +line with the standard @code{vi} movement keys, move to previous +history lines with @samp{k} and subsequent lines with @samp{j}, and +so forth. + +@ifset BashFeatures +@node Programmable Completion +@section Programmable Completion +@cindex programmable completion + +When word completion is attempted for an argument to a command for +which a completion specification (a @var{compspec}) has been defined +using the @code{complete} builtin (@pxref{Programmable Completion Builtins}), +the programmable completion facilities are invoked. + +First, the command name is identified. +If a compspec has been defined for that command, the +compspec is used to generate the list of possible completions for the word. +If the command word is the empty string (completion attempted at the +beginning of an empty line), any compspec defined with +the @option{-E} option to @code{complete} is used. +If the command word is a full pathname, a compspec for the full +pathname is searched for first. +If no compspec is found for the full pathname, an attempt is made to +find a compspec for the portion following the final slash. +If those searches do not result in a compspec, any compspec defined with +the @option{-D} option to @code{complete} is used as the default. +If there is no default compspec, Bash attempts alias expansion +on the command word as a final resort, and attempts to find a compspec +for the command word from any successful expansion + +Once a compspec has been found, it is used to generate the list of +matching words. +If a compspec is not found, the default Bash completion +described above (@pxref{Commands For Completion}) is performed. + +First, the actions specified by the compspec are used. +Only matches which are prefixed by the word being completed are +returned. +When the @option{-f} or @option{-d} option is used for filename or +directory name completion, the shell variable @env{FIGNORE} is +used to filter the matches. +@xref{Bash Variables}, for a description of @env{FIGNORE}. + +Any completions specified by a filename expansion pattern to the +@option{-G} option are generated next. +The words generated by the pattern need not match the word being completed. +The @env{GLOBIGNORE} shell variable is not used to filter the matches, +but the @env{FIGNORE} shell variable is used. + +Next, the string specified as the argument to the @option{-W} option +is considered. +The string is first split using the characters in the @env{IFS} +special variable as delimiters. +Shell quoting is honored within the string, in order to provide a +mechanism for the words to contain shell metacharacters or characters +in the value of @env{IFS}. +Each word is then expanded using +brace expansion, tilde expansion, parameter and variable expansion, +command substitution, and arithmetic expansion, +as described above (@pxref{Shell Expansions}). +The results are split using the rules described above +(@pxref{Word Splitting}). +The results of the expansion are prefix-matched against the word being +completed, and the matching words become the possible completions. + +After these matches have been generated, any shell function or command +specified with the @option{-F} and @option{-C} options is invoked. +When the command or function is invoked, the @env{COMP_LINE}, +@env{COMP_POINT}, @env{COMP_KEY}, and @env{COMP_TYPE} variables are +assigned values as described above (@pxref{Bash Variables}). +If a shell function is being invoked, the @env{COMP_WORDS} and +@env{COMP_CWORD} variables are also set. +When the function or command is invoked, the first argument ($1) is the +name of the command whose arguments are being completed, the +second argument ($2) is the word being completed, and the third argument +($3) is the word preceding the word being completed on the current command +line. +No filtering of the generated completions against the word being completed +is performed; the function or command has complete freedom in generating +the matches. + +Any function specified with @option{-F} is invoked first. +The function may use any of the shell facilities, including the +@code{compgen} and @code{compopt} builtins described below +(@pxref{Programmable Completion Builtins}), to generate the matches. +It must put the possible completions in the @env{COMPREPLY} array +variable, one per array element. + +Next, any command specified with the @option{-C} option is invoked +in an environment equivalent to command substitution. +It should print a list of completions, one per line, to +the standard output. +Backslash may be used to escape a newline, if necessary. + +After all of the possible completions are generated, any filter +specified with the @option{-X} option is applied to the list. +The filter is a pattern as used for pathname expansion; a @samp{&} +in the pattern is replaced with the text of the word being completed. +A literal @samp{&} may be escaped with a backslash; the backslash +is removed before attempting a match. +Any completion that matches the pattern will be removed from the list. +A leading @samp{!} negates the pattern; in this case any completion +not matching the pattern will be removed. +If the @code{nocasematch} shell option +(see the description of @code{shopt} in @ref{The Shopt Builtin}) +is enabled, the match is performed without regard to the case +of alphabetic characters. + +Finally, any prefix and suffix specified with the @option{-P} and @option{-S} +options are added to each member of the completion list, and the result is +returned to the Readline completion code as the list of possible +completions. + +If the previously-applied actions do not generate any matches, and the +@option{-o dirnames} option was supplied to @code{complete} when the +compspec was defined, directory name completion is attempted. + +If the @option{-o plusdirs} option was supplied to @code{complete} when +the compspec was defined, directory name completion is attempted and any +matches are added to the results of the other actions. + +By default, if a compspec is found, whatever it generates is returned to +the completion code as the full set of possible completions. +The default Bash completions are not attempted, and the Readline default +of filename completion is disabled. +If the @option{-o bashdefault} option was supplied to @code{complete} when +the compspec was defined, the default Bash completions are attempted +if the compspec generates no matches. +If the @option{-o default} option was supplied to @code{complete} when the +compspec was defined, Readline's default completion will be performed +if the compspec (and, if attempted, the default Bash completions) +generate no matches. + +When a compspec indicates that directory name completion is desired, +the programmable completion functions force Readline to append a slash +to completed names which are symbolic links to directories, subject to +the value of the @var{mark-directories} Readline variable, regardless +of the setting of the @var{mark-symlinked-directories} Readline variable. + +There is some support for dynamically modifying completions. This is +most useful when used in combination with a default completion specified +with @option{-D}. It's possible for shell functions executed as completion +handlers to indicate that completion should be retried by returning an +exit status of 124. If a shell function returns 124, and changes +the compspec associated with the command on which completion is being +attempted (supplied as the first argument when the function is executed), +programmable completion restarts from the beginning, with an +attempt to find a new compspec for that command. This allows a set of +completions to be built dynamically as completion is attempted, rather than +being loaded all at once. + +For instance, assuming that there is a library of compspecs, each kept in a +file corresponding to the name of the command, the following default +completion function would load completions dynamically: + +@example +_completion_loader() +@{ + . "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124 +@} +complete -D -F _completion_loader -o bashdefault -o default +@end example + +@node Programmable Completion Builtins +@section Programmable Completion Builtins +@cindex completion builtins + +Three builtin commands are available to manipulate the programmable completion +facilities: one to specify how the arguments to a particular command are to +be completed, and two to modify the completion as it is happening. + +@table @code +@item compgen +@btindex compgen +@example +@code{compgen [@var{option}] [@var{word}]} +@end example + +Generate possible completion matches for @var{word} according to +the @var{option}s, which may be any option accepted by the +@code{complete} +builtin with the exception of @option{-p} and @option{-r}, and write +the matches to the standard output. +When using the @option{-F} or @option{-C} options, the various shell variables +set by the programmable completion facilities, while available, will not +have useful values. + +The matches will be generated in the same way as if the programmable +completion code had generated them directly from a completion specification +with the same flags. +If @var{word} is specified, only those completions matching @var{word} +will be displayed. + +The return value is true unless an invalid option is supplied, or no +matches were generated. + +@item complete +@btindex complete +@example +@code{complete [-abcdefgjksuv] [-o @var{comp-option}] [-DEI] [-A @var{action}] [-G @var{globpat}] +[-W @var{wordlist}] [-F @var{function}] [-C @var{command}] [-X @var{filterpat}] +[-P @var{prefix}] [-S @var{suffix}] @var{name} [@var{name} @dots{}]} +@code{complete -pr [-DEI] [@var{name} @dots{}]} +@end example + +Specify how arguments to each @var{name} should be completed. +If the @option{-p} option is supplied, or if no options are supplied, existing +completion specifications are printed in a way that allows them to be +reused as input. +The @option{-r} option removes a completion specification for +each @var{name}, or, if no @var{name}s are supplied, all +completion specifications. +The @option{-D} option indicates that other supplied options and actions should +apply to the ``default'' command completion; that is, completion attempted +on a command for which no completion has previously been defined. +The @option{-E} option indicates that other supplied options and actions should +apply to ``empty'' command completion; that is, completion attempted on a +blank line. +The @option{-I} option indicates that other supplied options and actions should +apply to completion on the inital non-assignment word on the line, or after a +command delimiter such as @samp{;} or @samp{|}, which is usually command +name completion. +If multiple options are supplied, the @option{-D} option takes precedence +over @option{-E}, and both take precedence over @option{-I}. +If any of @option{-D}, @option{-E}, or @option{-I} are supplied, any other +@var{name} arguments are ignored; these completions only apply to the case +specified by the option. + +The process of applying these completion specifications when word completion +is attempted is described above (@pxref{Programmable Completion}). + +Other options, if specified, have the following meanings. +The arguments to the @option{-G}, @option{-W}, and @option{-X} options +(and, if necessary, the @option{-P} and @option{-S} options) +should be quoted to protect them from expansion before the +@code{complete} builtin is invoked. + + +@table @code +@item -o @var{comp-option} +The @var{comp-option} controls several aspects of the compspec's behavior +beyond the simple generation of completions. +@var{comp-option} may be one of: + +@table @code + +@item bashdefault +Perform the rest of the default Bash completions if the compspec +generates no matches. + +@item default +Use Readline's default filename completion if the compspec generates +no matches. + +@item dirnames +Perform directory name completion if the compspec generates no matches. + +@item filenames +Tell Readline that the compspec generates filenames, so it can perform any +filename-specific processing (like adding a slash to directory names, +quoting special characters, or suppressing trailing spaces). +This option is intended to be used with shell functions specified +with @option{-F}. + +@item noquote +Tell Readline not to quote the completed words if they are filenames +(quoting filenames is the default). + +@item nosort +Tell Readline not to sort the list of possible completions alphabetically. + +@item nospace +Tell Readline not to append a space (the default) to words completed at +the end of the line. + +@item plusdirs +After any matches defined by the compspec are generated, +directory name completion is attempted and any +matches are added to the results of the other actions. + +@end table + +@item -A @var{action} +The @var{action} may be one of the following to generate a list of possible +completions: + +@table @code +@item alias +Alias names. May also be specified as @option{-a}. + +@item arrayvar +Array variable names. + +@item binding +Readline key binding names (@pxref{Bindable Readline Commands}). + +@item builtin +Names of shell builtin commands. May also be specified as @option{-b}. + +@item command +Command names. May also be specified as @option{-c}. + +@item directory +Directory names. May also be specified as @option{-d}. + +@item disabled +Names of disabled shell builtins. + +@item enabled +Names of enabled shell builtins. + +@item export +Names of exported shell variables. May also be specified as @option{-e}. + +@item file +File names. May also be specified as @option{-f}. + +@item function +Names of shell functions. + +@item group +Group names. May also be specified as @option{-g}. + +@item helptopic +Help topics as accepted by the @code{help} builtin (@pxref{Bash Builtins}). + +@item hostname +Hostnames, as taken from the file specified by the +@env{HOSTFILE} shell variable (@pxref{Bash Variables}). + +@item job +Job names, if job control is active. May also be specified as @option{-j}. + +@item keyword +Shell reserved words. May also be specified as @option{-k}. + +@item running +Names of running jobs, if job control is active. + +@item service +Service names. May also be specified as @option{-s}. + +@item setopt +Valid arguments for the @option{-o} option to the @code{set} builtin +(@pxref{The Set Builtin}). + +@item shopt +Shell option names as accepted by the @code{shopt} builtin +(@pxref{Bash Builtins}). + +@item signal +Signal names. + +@item stopped +Names of stopped jobs, if job control is active. + +@item user +User names. May also be specified as @option{-u}. + +@item variable +Names of all shell variables. May also be specified as @option{-v}. +@end table + +@item -C @var{command} +@var{command} is executed in a subshell environment, and its output is +used as the possible completions. + +@item -F @var{function} +The shell function @var{function} is executed in the current shell +environment. +When it is executed, $1 is the name of the command whose arguments are +being completed, $2 is the word being completed, and $3 is the word +preceding the word being completed, as described above +(@pxref{Programmable Completion}). +When it finishes, the possible completions are retrieved from the value +of the @env{COMPREPLY} array variable. + +@item -G @var{globpat} +The filename expansion pattern @var{globpat} is expanded to generate +the possible completions. + +@item -P @var{prefix} +@var{prefix} is added at the beginning of each possible completion +after all other options have been applied. + +@item -S @var{suffix} +@var{suffix} is appended to each possible completion +after all other options have been applied. + +@item -W @var{wordlist} +The @var{wordlist} is split using the characters in the +@env{IFS} special variable as delimiters, and each resultant word +is expanded. +The possible completions are the members of the resultant list which +match the word being completed. + +@item -X @var{filterpat} +@var{filterpat} is a pattern as used for filename expansion. +It is applied to the list of possible completions generated by the +preceding options and arguments, and each completion matching +@var{filterpat} is removed from the list. +A leading @samp{!} in @var{filterpat} negates the pattern; in this +case, any completion not matching @var{filterpat} is removed. +@end table + +The return value is true unless an invalid option is supplied, an option +other than @option{-p} or @option{-r} is supplied without a @var{name} +argument, an attempt is made to remove a completion specification for +a @var{name} for which no specification exists, or +an error occurs adding a completion specification. + +@item compopt +@btindex compopt +@example +@code{compopt} [-o @var{option}] [-DEI] [+o @var{option}] [@var{name}] +@end example +Modify completion options for each @var{name} according to the +@var{option}s, or for the currently-executing completion if no @var{name}s +are supplied. +If no @var{option}s are given, display the completion options for each +@var{name} or the current completion. +The possible values of @var{option} are those valid for the @code{complete} +builtin described above. +The @option{-D} option indicates that other supplied options should +apply to the ``default'' command completion; that is, completion attempted +on a command for which no completion has previously been defined. +The @option{-E} option indicates that other supplied options should +apply to ``empty'' command completion; that is, completion attempted on a +blank line. +The @option{-I} option indicates that other supplied options should +apply to completion on the inital non-assignment word on the line, or after a +command delimiter such as @samp{;} or @samp{|}, which is usually command +name completion. + +If multiple options are supplied, the @option{-D} option takes precedence +over @option{-E}, and both take precedence over @option{-I} + +The return value is true unless an invalid option is supplied, an attempt +is made to modify the options for a @var{name} for which no completion +specification exists, or an output error occurs. + +@end table + +@node A Programmable Completion Example +@section A Programmable Completion Example + +The most common way to obtain additional completion functionality beyond +the default actions @code{complete} and @code{compgen} provide is to use +a shell function and bind it to a particular command using @code{complete -F}. + +The following function provides completions for the @code{cd} builtin. +It is a reasonably good example of what shell functions must do when +used for completion. This function uses the word passed as @code{$2} +to determine the directory name to complete. You can also use the +@code{COMP_WORDS} array variable; the current word is indexed by the +@code{COMP_CWORD} variable. + +The function relies on the @code{complete} and @code{compgen} builtins +to do much of the work, adding only the things that the Bash @code{cd} +does beyond accepting basic directory names: +tilde expansion (@pxref{Tilde Expansion}), +searching directories in @var{$CDPATH}, which is described above +(@pxref{Bourne Shell Builtins}), +and basic support for the @code{cdable_vars} shell option +(@pxref{The Shopt Builtin}). +@code{_comp_cd} modifies the value of @var{IFS} so that it contains only +a newline to accommodate file names containing spaces and tabs -- +@code{compgen} prints the possible completions it generates one per line. + +Possible completions go into the @var{COMPREPLY} array variable, one +completion per array element. The programmable completion system retrieves +the completions from there when the function returns. + +@example +# A completion function for the cd builtin +# based on the cd completion function from the bash_completion package +_comp_cd() +@{ + local IFS=$' \t\n' # normalize IFS + local cur _skipdot _cdpath + local i j k + + # Tilde expansion, which also expands tilde to full pathname + case "$2" in + \~*) eval cur="$2" ;; + *) cur=$2 ;; + esac + + # no cdpath or absolute pathname -- straight directory completion + if [[ -z "$@{CDPATH:-@}" ]] || [[ "$cur" == @@(./*|../*|/*) ]]; then + # compgen prints paths one per line; could also use while loop + IFS=$'\n' + COMPREPLY=( $(compgen -d -- "$cur") ) + IFS=$' \t\n' + # CDPATH+directories in the current directory if not in CDPATH + else + IFS=$'\n' + _skipdot=false + # preprocess CDPATH to convert null directory names to . + _cdpath=$@{CDPATH/#:/.:@} + _cdpath=$@{_cdpath//::/:.:@} + _cdpath=$@{_cdpath/%:/:.@} + for i in $@{_cdpath//:/$'\n'@}; do + if [[ $i -ef . ]]; then _skipdot=true; fi + k="$@{#COMPREPLY[@@]@}" + for j in $( compgen -d -- "$i/$cur" ); do + COMPREPLY[k++]=$@{j#$i/@} # cut off directory + done + done + $_skipdot || COMPREPLY+=( $(compgen -d -- "$cur") ) + IFS=$' \t\n' + fi + + # variable names if appropriate shell option set and no completions + if shopt -q cdable_vars && [[ $@{#COMPREPLY[@@]@} -eq 0 ]]; then + COMPREPLY=( $(compgen -v -- "$cur") ) + fi + + return 0 +@} +@end example + +We install the completion function using the @option{-F} option to +@code{complete}: + +@example +# Tell readline to quote appropriate and append slashes to directories; +# use the bash default completion for other arguments +complete -o filenames -o nospace -o bashdefault -F _comp_cd cd +@end example + +@noindent +Since we'd like Bash and Readline to take care of some +of the other details for us, we use several other options to tell Bash +and Readline what to do. The @option{-o filenames} option tells Readline +that the possible completions should be treated as filenames, and quoted +appropriately. That option will also cause Readline to append a slash to +filenames it can determine are directories (which is why we might want to +extend @code{_comp_cd} to append a slash if we're using directories found +via @var{CDPATH}: Readline can't tell those completions are directories). +The @option{-o nospace} option tells Readline to not append a space +character to the directory name, in case we want to append to it. +The @option{-o bashdefault} option brings in the rest of the "Bash default" +completions -- possible completion that Bash adds to the default Readline +set. These include things like command name completion, variable completion +for words beginning with @samp{@{}, completions containing pathname +expansion patterns (@pxref{Filename Expansion}), and so on. + +Once installed using @code{complete}, @code{_comp_cd} will be called every +time we attempt word completion for a @code{cd} command. + +Many more examples -- an extensive collection of completions for most of +the common GNU, Unix, and Linux commands -- are available as part of the +bash_completion project. This is installed by default on many GNU/Linux +distributions. Originally written by Ian Macdonald, the project now lives +at @url{http://bash-completion.alioth.debian.org/}. There are ports for +other systems such as Solaris and Mac OS X. + +An older version of the bash_completion package is distributed with bash +in the @file{examples/complete} subdirectory. + +@end ifset diff --git a/readline/readline/doc/rluserman.texi b/readline/readline/doc/rluserman.texi new file mode 100644 index 0000000000..b5754389eb --- /dev/null +++ b/readline/readline/doc/rluserman.texi @@ -0,0 +1,70 @@ +\input texinfo @c -*-texinfo-*- +@comment %**start of header (This is for running Texinfo on a region.) +@setfilename rluserman.info +@settitle GNU Readline Library +@include version.texi + +@comment %**end of header (This is for running Texinfo on a region.) + +@copying +This manual describes the end user interface of the GNU Readline Library +(version @value{VERSION}, @value{UPDATED}), a library which aids in the +consistency of user interface across discrete programs which provide +a command line interface. + +Copyright @copyright{} 1988--2016 Free Software Foundation, Inc. + +@quotation +Permission is granted to copy, distribute and/or modify this document +under the terms of the GNU Free Documentation License, Version 1.3 or +any later version published by the Free Software Foundation; with no +Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. +A copy of the license is included in the section entitled +``GNU Free Documentation License''. + +@end quotation +@end copying + +@dircategory Libraries +@direntry +* RLuserman: (rluserman). The GNU readline library User's Manual. +@end direntry + +@titlepage +@title GNU Readline Library User Interface +@subtitle Edition @value{EDITION}, for @code{Readline Library} Version @value{VERSION}. +@subtitle @value{UPDATED-MONTH} +@author Chet Ramey, Case Western Reserve University +@author Brian Fox, Free Software Foundation + +@page +@vskip 0pt plus 1filll +@insertcopying + +@end titlepage + +@contents + +@ifnottex +@node Top +@top GNU Readline Library + +This document describes the end user interface of the GNU Readline Library, +a utility which aids in the consistency of user interface across discrete +programs which provide a command line interface. +The Readline home page is @url{http://www.gnu.org/software/readline/}. + +@menu +* Command Line Editing:: GNU Readline User's Manual. +* GNU Free Documentation License:: License for copying this manual. +@end menu +@end ifnottex + +@include rluser.texi + +@node GNU Free Documentation License +@appendix GNU Free Documentation License + +@include fdl.texi + +@bye diff --git a/readline/readline/doc/texi2dvi b/readline/readline/doc/texi2dvi new file mode 100755 index 0000000000..173e8ab4bb --- /dev/null +++ b/readline/readline/doc/texi2dvi @@ -0,0 +1,1944 @@ +#! /bin/sh +# texi2dvi --- produce DVI (or PDF) files from Texinfo (or (La)TeX) sources. +# $Id: texi2dvi 5704 2014-07-07 17:45:16Z karl $ +# +# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014 +# Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, +# or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +# Originally written by Noah Friedman. +# +# Please send bug reports, etc. to bug-texinfo@gnu.org. +# If possible, please send a copy of the output of the script called with +# the `--debug' option when making a bug report. + +test -f /bin/ksh && test -z "$RUNNING_KSH" \ + && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \ + && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; } +unset RUNNING_KSH + +# No failure shall remain unpunished. +set -e + +# In case the default sed doesn't suffice. +: ${SED=sed} + +# This string is expanded automatically when this file is checked out. +rcs_revision='$Revision: 5704 $' +rcs_version=`set - $rcs_revision; echo $2` +program=`echo $0 | $SED -e 's!.*/!!'` + +build_mode=${TEXI2DVI_BUILD_MODE:-local} +build_dir=${TEXI2DVI_BUILD_DIRECTORY:-.} + +# Initialize variables for option overriding and otherwise. +# Don't use `unset' since old bourne shells don't have this command. +# Instead, assign them an empty value. +action=compile +batch=false # interact normally +catcode_special=maybe +debug=false +escape="\\" +expand=false # true for expansion via makeinfo +includes= +line_error=true # pass --file-line-error to TeX +max_iters=7 # when to quit +oname= # --output +out_lang=dvi +quiet=false # let the tools' message be displayed +set_language= +src_specials= +shell_escape= +latex2html=hevea # or set to tex4ht +textra= # Extra TeX commands to insert in the input file. +txiprereq=19990129 # minimum texinfo.tex version with macro expansion +verb=false # true for verbose mode +translate_file= # name of charset translation file + +orig_pwd=`pwd` + +# We have to initialize IFS to space tab newline since we save and +# restore IFS and apparently POSIX allows stupid/broken behavior with +# empty-but-set IFS. +# http://lists.gnu.org/archive/html/automake-patches/2006-05/msg00008.html +# We need space, tab and new line, in precisely that order. And don't leave +# trailing blanks. +space=' ' +tab=' ' +newline=' +' +IFS="$space$tab$newline" + +# In case someone pedantic insists on using grep -E. +: ${EGREP=egrep} + +# Systems which define $COMSPEC or $ComSpec use semicolons to separate +# directories in TEXINPUTS -- except for Cygwin et al., where COMSPEC +# might be inherited, but : is used. +if test -n "$COMSPEC$ComSpec" \ + && uname | $EGREP -iv 'cygwin|mingw|djgpp' >/dev/null; then + path_sep=";" +else + path_sep=":" +fi + +# Pacify verbose cds. +CDPATH=${ZSH_VERSION+.}$path_sep + +# If $TEX is set to a directory, don't use it. +test -n "$TEX" && test -d "$TEX" && unset TEX + +# +## --------------------- ## +## Auxiliary functions. ## +## --------------------- ## + +# In case `local' is not supported by the shell, provide a function +# that simulates it by simply performing the assignments. This means +# that we must not expect `local' to work, i.e., we must not (i) rely +# on it during recursion, and (ii) have two local declarations of the +# same variable. (ii) is easy to check statically, and our test suite +# does make sure there is never twice a static local declaration of a +# variable. (i) cannot be checked easily, so just be careful. +# +# Note that since we might use a function simulating `local', we can +# no longer rely on the fact that no IFS-splitting is performed. So, +# while +# +# foo=$bar +# +# is fine (no IFS-splitting), never write +# +# local foo=$bar +# +# but rather +# +# local foo="$bar" +( + foo=bar + test_local () { + local foo=foo + } + test_local >/dev/null 2>&1 + test $foo = bar +) || eval ' +local () { + case $1 in + *=*) eval "$1";; + esac +} +' + + +# cd_orig +# ------- +# Return to the original directory. +cd_orig () +{ + # In case $orig_pwd is on a different drive (for DOS). + cd / + + # Return to the original directory so that + # - the next file is processed in correct conditions + # - the temporary file can be removed + cd "$orig_pwd" || exit 1 +} + +# func_dirname FILE +# ----------------- +# Return the directory part of FILE. +func_dirname () +{ + dirname "$1" 2>/dev/null \ + || { echo "$1" | $SED 's!/[^/]*$!!;s!^$!.!'; } +} + + +# noexit FILE +# ----------- +# Return FILE with one extension remove. foo.bar.baz -> foo.bar. +noext () +{ + echo "$1" | $SED -e 's/\.[^/.][^/.]*$//' +} + + +# absolute NAME -> ABS-NAME +# ------------------------- +# Return an absolute path to NAME. +absolute () +{ + case $1 in + [\\/]* | ?:[\\/]*) + # Absolute paths don't need to be expanded. + echo "$1" + ;; + *) local slashes + slashes=`echo "$1" | $SED -n 's,.*[^/]\(/*\)$,\1,p'` + local rel + rel=$orig_pwd/`func_dirname "$1"` + if test -d "$rel"; then + (cd "$rel" 2>/dev/null \ + && local n + n=`pwd`/`basename "$1"`"$slashes" + echo "$n") + else + error 1 "not a directory: $rel" + fi + ;; + esac +} + + +# ensure_dir DIR1 DIR2... +# ----------------------- +# Make sure the directories exist. +ensure_dir () +{ + for dir + do + # Beware that in parallel builds we may have several concurrent + # attempts to create the directory. So fail only if "mkdir" + # failed *and* the directory still does not exist. + test -d "$dir" \ + || mkdir "$dir" \ + || test -d "$dir" \ + || error 1 "cannot create directory: $dir" + done +} + + +# error EXIT_STATUS LINE1 LINE2... +# -------------------------------- +# Report an error and exit with failure if EXIT_STATUS is non-null. +error () +{ + local s="$1" + shift + report "$@" + if test "$s" != 0; then + exit $s + fi +} + + +# findprog PROG +# ------------- +# Return true if PROG is somewhere in PATH, else false. +findprog () +{ + local saveIFS="$IFS" + IFS=$path_sep # break path components at the path separator + for dir in $PATH; do + IFS=$saveIFS + # The basic test for an executable is `test -f $f && test -x $f'. + # (`test -x' is not enough, because it can also be true for directories.) + # We have to try this both for $1 and $1.exe. + # + # Note: On Cygwin and DJGPP, `test -x' also looks for .exe. On Cygwin, + # also `test -f' has this enhancement, but not on DJGPP. (Both are + # design decisions, so there is little chance to make them consistent.) + # Thusly, it seems to be difficult to make use of these enhancements. + # + if { test -f "$dir/$1" && test -x "$dir/$1"; } \ + || { test -f "$dir/$1.exe" && test -x "$dir/$1.exe"; }; then + return 0 + fi + done + return 1 +} + +# report LINE1 LINE2... +# --------------------- +# Report some information on stderr. +report () +{ + for i in "$@" + do + echo >&2 "$0: $i" + done +} + + +# run COMMAND-LINE +# ---------------- +# Run the COMMAND-LINE verbosely, and catching errors as failures. +run () +{ + verbose "Running $@" + "$@" 2>&5 1>&2 \ + || error 1 "$1 failed" +} + + +# usage +# ----- +# Display usage and exit successfully. +usage () +{ + # We used to simply have `echo "$usage"', but coping with the + # changing behavior of `echo' is much harder than simply using a + # here-doc. + # + # echo '\noto' echo '\\noto' echo -e '\\noto' + # bash 3.1 \noto \\noto \noto + # bash 3.2 %oto \noto -e \noto + # + # where % denotes the eol character. + cat < +General help using GNU software: +EOF + exit 0 +} + + +# verbose WORD1 WORD2 +# ------------------- +# Report some verbose information. +verbose () +{ + if $verb; then + echo >&2 "$0: $@" + fi +} + + +# version +# ------- +# Display version info and exit successfully. +version () +{ + cat < +This is free software: you are free to change and redistribute it. +There is NO WARRANTY, to the extent permitted by law. +EOF + exit 0 +} + + +## ---------------- ## +## Handling lists. ## +## ---------------- ## + + +# list_append LIST-NAME ELEM +# -------------------------- +# Set LIST-NAME to its former contents, with ELEM appended. +list_append () +{ + local la_l="$1" + shift + eval set X \$$la_l "$@" + shift + eval $la_l=\""$@"\" +} + + +# list_concat_dirs LIST-NAME DIR-LIST +# ----------------------------------- +# Append to LIST-NAME all the components (included empty) from +# the $path_sep separated list DIR-LIST. Make the paths absolute. +list_concat_dirs () +{ + local lcd_list="$1" + # Empty path components are meaningful to tex. We rewrite them as + # `EMPTY' so they don't get lost when we split on $path_sep. + # Hopefully no one will have an actual directory named EMPTY. + local replace_EMPTY="-e 's/^$path_sep/EMPTY$path_sep/g' \ + -e 's/$path_sep\$/${path_sep}EMPTY/g' \ + -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'" + save_IFS=$IFS + IFS=$path_sep + set x `echo "$2" | eval $SED $replace_EMPTY`; shift + IFS=$save_IFS + local dir + for dir + do + case $dir in + EMPTY) + list_append $lcd_list "" + ;; + *) + if test -d $dir; then + dir=`absolute "$dir"` + list_append $lcd_list "$dir" + fi + ;; + esac + done +} + + +# list_prefix LIST-NAME SEP -> STRING +# ----------------------------------- +# Return a string that is composed of the LIST-NAME with each item +# preceded by SEP. +list_prefix () +{ + local lp_p="$2" + eval set X \$$1 + shift + local lp_res + for i + do + lp_res="$lp_res \"$lp_p\" \"$i\"" + done + echo "$lp_res" +} + +# list_infix LIST-NAME SEP -> STRING +# ---------------------------------- +# Same as list_prefix, but a separator. +list_infix () +{ + eval set X \$$1 + shift + local la_IFS="$IFS" + IFS=$path_sep + echo "$*" + IFS=$la_IFS +} + +# list_dir_to_abs LIST-NAME +# ------------------------- +# Convert the list to using only absolute dir names. +# Currently unused, but should replace absolute_filenames some day. +list_dir_to_abs () +{ + local ld_l="$1" + eval set X \$$ld_l + shift + local ld_res + for dir + do + dir=`absolute "$dir"` + test -d "$dir" || continue + ld_res="$ld_res \"$dir\"" + done + set X $ld_res; shift + eval $ld_l=\"$@\" +} + + +## ------------------------------ ## +## Language auxiliary functions. ## +## ------------------------------ ## + + +# out_lang_set LANG +# ----------------- +out_lang_set () +{ + case $1 in + dvi|dvipdf|html|info|pdf|ps|text) out_lang=$1;; + *) error 1 "invalid output format: $1";; + esac +} + + +# out_lang_tex +# ------------ +# Return the tex output language (DVI or PDF) for $OUT_LANG. +out_lang_tex () +{ + case $out_lang in + dvi | ps | dvipdf ) echo dvi;; + pdf ) echo $out_lang;; + html | info | text ) echo $out_lang;; + *) error 1 "invalid out_lang: $1";; + esac +} + + +# out_lang_ext +# ------------ +# Return the extension for $OUT_LANG. +out_lang_ext () +{ + case $out_lang in + dvipdf ) echo pdf;; + dvi | html | info | pdf | ps | text ) echo $out_lang;; + *) error 1 "invalid out_lang: $1";; + esac +} + + +## ------------------------- ## +## TeX auxiliary functions. ## +## ------------------------- ## + +# Save TEXINPUTS so we can construct a new TEXINPUTS path for each file. +# Likewise for bibtex and makeindex. +tex_envvars="BIBINPUTS BSTINPUTS DVIPSHEADERS INDEXSTYLE MFINPUTS MPINPUTS \ +TEXINPUTS TFMFONTS" +for var in $tex_envvars; do + eval ${var}_orig=\$$var + export $var +done + + +# absolute_filenames TEX-PATH -> TEX-PATH +# --------------------------------------- +# Convert relative paths to absolute paths, so we can run in another +# directory (e.g., in tidy build mode, or during the macro-support +# detection). Prepend ".". +absolute_filenames () +{ + # Empty path components are meaningful to tex. We rewrite them as + # `EMPTY' so they don't get lost when we split on $path_sep. + # Hopefully no one will have an actual directory named EMPTY. + local replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \ + -e 's/$path_sep\$/${path_sep}EMPTY/g' \ + -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'" + local res + res=`echo "$1" | eval $SED $replace_empty` + save_IFS=$IFS + IFS=$path_sep + set x $res; shift + res=. + for dir + do + case $dir in + EMPTY) + res=$res$path_sep + ;; + *) + if test -d "$dir"; then + res=$res$path_sep`absolute "$dir"` + else + # Even if $dir is not a directory, preserve it in the path. + # It might contain metacharacters that TeX will expand in + # turn, e.g., /some/path/{a,b,c}. This will not get the + # implicit absolutification of the path, but we can't help that. + res=$res$path_sep$dir + fi + ;; + esac + done + echo "$res" +} + + +# output_base_name FILE +# --------------------- +# The name of FILE, possibly renamed to satisfy --output. +# FILE is local, there is no directory part. +output_base_name () +{ + case $oname in + '') echo "$1";; + *) local out_noext + out_noext=`noext "$oname"` + local file_ext + file_ext=`echo "$1" | $SED 's/^.*\.//'` + echo "$out_noext.$file_ext" + ;; + esac +} + + +# destdir +# ------- +# Return the name of the directory where the output is expected. +destdir () +{ + case $oname in + '') echo "$orig_pwd";; + *) dirname "$oname";; + esac +} + + +# move_to_dest FILE... +# -------------------- +# Move FILE to the place where the user expects it. Truly move it, that +# is, it must not remain in its build location unless that is also the +# output location. (Otherwise it might appear as an extra file in make +# distcheck.) +# +# FILE can be the principal output (in which case -o directly applies), or +# an auxiliary file with the same base name. +move_to_dest () +{ +# echo "move_to_dest $*, tidy=$tidy, oname=$oname" + + # If we built in place and have no output name, there is nothing to + # do, so just return. + case $tidy:$oname in + false:) return;; + esac + + local destfile + local destdir + local destbase + local sourcedir + local sourcebase + + for file + do + test -f "$file" \ + || error 1 "no such file or directory: $file" + case $tidy:$oname in + true:) destdir=$orig_pwd + destfile=$destdir/$file;; + true:*) destfile=`output_base_name "$file"` + destdir=`dirname "$destfile"`;; + false:*) destfile=$oname + destdir=`dirname "$destfile"`;; + esac + + # We want to compare the source location and the output location, + # and if they are different, do the move. But if they are the + # same, we must preserve the source. Since we can't assume + # stat(1) or test -ef is available, resort to comparing the + # directory names, canonicalized with pwd. We can't use cmp -s + # since the output file might not actually change from run to run; + # e.g., TeX DVI output is timestamped to only the nearest minute. + destdir=`cd "$destdir" && pwd` + destbase=`basename "$destfile"` + + sourcedir=`dirname "$file"` + sourcedir=`cd "$sourcedir" && pwd` + sourcebase=`basename "$file"` + + if test "$sourcedir/$sourcebase" != "$destdir/$destbase"; then + verbose "Moving $file to $destfile" + rm -f "$destfile" + mv "$file" "$destfile" + fi + done +} + + +## --------------------- ## +## Managing xref files. ## +## --------------------- ## + +# aux_file_p FILE +# --------------- +# Return with success if FILE is an aux file. +aux_file_p () +{ + test -f "$1" || return 1 + case $1 in + *.aux) return 0;; + *) return 1;; + esac +} + +# bibaux_file_p FILE +# ------------------ +# Return with success if FILE is an aux file containing citation +# requests. +bibaux_file_p () +{ + test -s "$1" || return 1 + if (grep '^\\bibstyle[{]' "$1" \ + && grep '^\\bibdata[{]' "$1" \ + ## The following line is suspicious: fails when there + ## are citations in sub aux files. We need to be + ## smarter in this case. + ## && grep '^\\citation[{]' "$f" + ) >&6 2>&1; + then + return 0 + fi + return 1 +} + +# index_file_p FILE +# ----------------- +# Return with success if FILE is an index file. +index_file_p () +{ + test -f "$1" || return 1 + case $in_lang:$latex2html:`out_lang_tex`:`$SED '1q' "$1"` in + # When working with TeX4HT, *.idx are created by LaTeX. They must + # be processed to produce *.4ix, *.4dx files. The *.4dx file is + # passed to makeindex to produce the *.ind file. This sequence is + # handled by run_index, so we are only interested in the *.idx + # files, which have each "\indexentry" preceded by a + # "\beforeentry". + latex:tex4ht:html:"\\beforeentry {"*) return 0;; + + # When index.sty is used, there is a space before the brace. + latex:*:*:"\\indexentry{"*|latex:*:*:"\\indexentry {"*) return 0;; + + texinfo:*:*:"\\entry{"*) return 0;; + + *) return 1;; + esac +} + +# xref_file_p FILE +# ---------------- +# Return with success if FILE is an xref file (indexes, tables and lists). +xref_file_p () +{ + test -f "$1" || return 1 + # If the file is not suitable to be an index or xref file, don't + # process it. It's suitable if the first character is a + # backslash or right quote or at, as long as the first line isn't + # \input texinfo. + case `$SED '1q' "$1"` in + "\\input texinfo"*) return 1;; + [\\''@]*) return 0;; + *) return 1;; + esac +} + + +# generated_files_get FILENAME-NOEXT [PREDICATE-FILTER] +# ----------------------------------------------------- +# Return the list of files generated by the TeX compilation of FILENAME-NOEXT. +generated_files_get () +{ + local filter=true + if test -n "$2"; then + filter=$2 + fi + + # Gather the files created by TeX. + ( + if test -f "$1.log"; then + $SED -n -e "s,^\\\\openout.* = \`\\(.*\\)'\\.,\\1,p" "$1.log" + fi + echo "$1.log" + ) | + # Depending on these files, infer outputs from other tools. + while read file; do + echo $file + case $in_lang in + texinfo) + # texindex: texinfo.cp -> texinfo.cps + if index_file_p $file; then + echo ${file}s + fi + ;; + latex) + if aux_file_p $file; then + # bibtex: *.aux -> *.bbl and *.blg. + echo $file | $SED 's/^\(.*\)\.aux$/\1.bbl/' + echo $file | $SED 's/^\(.*\)\.aux$/\1.blg/' + # -recorder: .fls + echo $file | $SED 's/^\(.*\)\.aux$/\1.fls/' + fi + ;; + esac + done | + # Filter existing files matching the criterion. + # + # With an input file name containing a space, this produces a + # "command not found" message (and filtering is ineffective). + # The situation with a newline is presumably even worse. + while read file; do + if $filter "$file"; then + echo $file + fi + done | + sort | + # Some files are opened several times, e.g., listings.sty's *.vrb. + uniq +} + + +# xref_files_save +# --------------- +# Save the xref files. +xref_files_save () +{ + # Save copies of auxiliary files for later comparison. + xref_files_orig=`generated_files_get "$in_noext" xref_file_p` + if test -n "$xref_files_orig"; then + verbose "Backing up xref files: $xref_files_orig" + # The following line improves `cp $xref_files_orig "$work_bak"' + # by preserving the directory parts. Think of + # cp chap1/main.aux chap2/main.aux $work_bak. + # + # Users may have, e.g., --keep-old-files. Don't let this interfere. + # (Don't use unset for the sake of ancient shells.) + TAR_OPTIONS=; export TAR_OPTIONS + tar cf - $xref_files_orig | (cd "$work_bak" && tar xf -) + fi +} + + +# xref_files_changed +# ------------------ +# Whether the xref files were changed since the previous run. +xref_files_changed () +{ + # LaTeX (and the package changebar) report in the LOG file if it + # should be rerun. This is needed for files included from + # subdirs, since texi2dvi does not try to compare xref files in + # subdirs. Performing xref files test is still good since LaTeX + # does not report changes in xref files. + if grep "Rerun to get" "$in_noext.log" >&6 2>&1; then + return 0 + fi + # biblatex report of whether rerunning is needed. + if grep "biblatex.*(re)run" "$in_noext.log" >&6 2>&1; then + return 0 + fi + + # If old and new lists don't have the same file list, + # then something has definitely changed. + xref_files_new=`generated_files_get "$in_noext" xref_file_p` + verbose "Original xref files = $xref_files_orig" + verbose "New xref files = $xref_files_new" + if test "x$xref_files_orig" != "x$xref_files_new"; then + return 0 + fi + + # Compare each file until we find a difference. + for this_file in $xref_files_new; do + verbose "Comparing xref file `echo $this_file | $SED 's|\./||g'` ..." + # cmp -s returns nonzero exit status if files differ. + if cmp -s "$this_file" "$work_bak/$this_file"; then :; else + verbose "xref file `echo $this_file | $SED 's|\./||g'` differed ..." + if $debug; then + diff -u "$work_bak/$this_file" "$this_file" + fi + return 0 + fi + done + + # No change. + return 1 +} + + + +## ----------------------- ## +## Running the TeX suite. ## +## ----------------------- ## + + + +# run_tex () +# ---------- +# Run TeX as "$tex $in_input", taking care of errors and logs. +run_tex () +{ + case $in_lang:$latex2html:`out_lang_tex` in + latex:*:dvi|latex:tex4ht:html) + tex=${LATEX:-latex};; + latex:*:pdf) + tex=${PDFLATEX:-pdflatex};; + texinfo:*:dvi) + # MetaPost also uses the TEX environment variable. If the user + # has set TEX=latex for that reason, don't bomb out. + case $TEX in + *latex) tex=tex;; # don't bother trying to find etex + *) tex=$TEX + esac;; + texinfo:*:pdf) tex=$PDFTEX;; + + *) error 1 "$out_lang not supported for $in_lang";; + esac + + # do the special catcode trick for ~ in filenames only for Texinfo, + # not LaTeX. + if test x"$in_lang" = xtexinfo && test $catcode_special = maybe; then + catcode_special=true + else + catcode_special=false + fi + + # Beware of aux files in subdirectories that require the + # subdirectory to exist. + case $in_lang:$tidy in + latex:true) + $SED -n 's|^[ ]*\\include{\(.*\)/.*}.*|\1|p' "$in_input" | + sort -u | + while read d + do + ensure_dir "$work_build/$d" + done + ;; + esac + + # Note that this will be used via an eval: quote properly. + local cmd="$tex" + + # If possible, make TeX report error locations in GNU format. + if $line_error; then + if test "${tex_help:+set}" != set; then + # Go to a temporary directory to try --help, since old versions that + # don't accept --help will generate a texput.log. + tex_help_dir=$t2ddir/tex_help + ensure_dir "$tex_help_dir" + tex_help=`cd "$tex_help_dir" >&6 && $tex --help &1 || true` + fi + # The mk program and perhaps others want to parse TeX's + # original error messages. + case $tex_help in + *file-line-error*) cmd="$cmd --file-line-error";; + esac + fi + + # Tell TeX about TCX file, if specified. + test -n "$translate_file" && cmd="$cmd --translate-file=$translate_file" + + # Tell TeX to make source specials (for backtracking from output to + # source, given a sufficiently smart editor), if specified. + test -n "$src_specials" && cmd="$cmd $src_specials" + + # Tell TeX to allow running external executables + test -n "$shell_escape" && cmd="$cmd $shell_escape" + + # Tell TeX to be batch if requested. + if $batch; then + # \batchmode does not show terminal output at all, so we don't + # want that. And even in batch mode, TeX insists on having input + # from the user. Close its stdin to make it impossible. + cmd="$cmd &5; then + case $out_lang in + dvi | pdf ) move_to_dest "$in_noext.$out_lang";; + esac + else + error 1 "$tex exited with bad status, quitting." + fi +} + +# run_bibtex () +# ------------- +# Run bibtex on (or biber) current file. +# - If its input (AUX) exists. +# - If some citations are missing (LOG contains `Citation'). +# or the LOG complains of a missing .bbl +# +# Don't try to be too smart: +# 1. Running bibtex only if the bbl file exists and is older than +# the LaTeX file is wrong, since the document might include files +# that have changed. +# +# 3. Because there can be several AUX (if there are \include's), +# but a single LOG, looking for missing citations in LOG is +# easier, though we take the risk of matching false messages. +run_bibtex () +{ + case $in_lang in + latex) bibtex=${BIBTEX:-bibtex};; + texinfo) return;; + esac + + # "Citation undefined" is for LaTeX, "Undefined citation" for btxmac.tex. + # The no .aux && \bibdata test is also for btxmac, in case it was the + # first run of a bibtex-using document. Otherwise, it's possible that + # bibtex would never be run. + if test -r "$in_noext.aux" \ + && test -r "$in_noext.log" \ + && ( (grep 'Warning:.*Citation.*undefined' "$in_noext.log" \ + || grep '.*Undefined citation' "$in_noext.log" \ + || grep 'No file .*\.bbl\.' "$in_noext.log") \ + || (grep 'No \.aux file' "$in_noext.log" \ + && grep '^\\bibdata' "$in_noext.aux") ) \ + >&6 2>&1; \ + then + bibtex_aux=`generated_files_get "$in_noext" bibaux_file_p` + for f in $bibtex_aux; do + run $bibtex "$f" + done + fi + + # biber(+biblatex) check. + if test -r "$in_noext.bcf" \ + && grep '' "$in_noext.bcf" >/dev/null; then + run ${BIBER:-biber} "$in_noext" + fi +} + +# run_index () +# ------------ +# Run texindex (or makeindex or texindy) on current index files. If +# they already exist, and after running TeX a first time the index +# files don't change, then there's no reason to run TeX again. But we +# won't know that if the index files are out of date or nonexistent. +run_index () +{ + local index_files + index_files=`generated_files_get $in_noext index_file_p` + test -n "$index_files" \ + || return 0 + + : ${MAKEINDEX:=makeindex} + : ${TEXINDEX:=texindex} + : ${TEXINDY:=texindy} + + local index_file + local index_noext + case $in_lang:$latex2html:`out_lang_tex` in + latex:tex4ht:html) + for index_file in $index_files + do + index_noext=`noext "$index_file"` + run tex \ + '\def\filename{{'"$index_noext"'}{idx}{4dx}{ind}} + \input idxmake.4ht' + run $MAKEINDEX -o $index_noext.ind $index_noext.4dx + done + ;; + + latex:*) + if $TEXINDY --version >&6 2>&1; then + run $TEXINDY $index_files + else + run $MAKEINDEX $index_files + fi + ;; + + texinfo:*) + run $TEXINDEX $index_files + ;; + esac +} + + +# run_tex4ht () +# ------------- +# Run the last two phases of TeX4HT: tex4ht extracts the HTML from the +# instrumented DVI file, and t4ht converts the figures and installs +# the files when given -d. +# +# Because knowing exactly which files are created is complex (in +# addition the names are not simple to compute), which makes it +# difficult to install the output files in a second step, it is much +# simpler to install directly the output files. +run_tex4ht () +{ + case $in_lang:$latex2html:`out_lang_tex` in + latex:tex4ht:html) + : ${TEX4HT:=tex4ht} ${T4HT:=t4ht} + run "$TEX4HT" "-f/$in_noext" + # Do not remove the / after the destdir. + run "$T4HT" "-d`destdir`/" "-f/$in_noext" + ;; + esac +} + + +# run_thumbpdf () +# --------------- +run_thumbpdf () +{ + if test `out_lang_tex` = pdf \ + && test -r "$in_noext.log" \ + && grep 'thumbpdf\.sty' "$in_noext.log" >&6 2>&1; \ + then + thumbpdf=${THUMBPDF_CMD:-thumbpdf} + thumbcmd="$thumbpdf $in_dir/$in_noext" + verbose "Running $thumbcmd ..." + if $thumbcmd >&5; then + run_tex + else + report "$thumbpdf exited with bad status." \ + "Ignoring its output." + fi + fi +} + + +# run_dvipdf FILE.dvi +# ------------------- +# Convert FILE.dvi to FILE.pdf. +run_dvipdf () +{ + # Find which dvi->pdf program is available. + if test -z "$dvipdf"; then + for i in "$DVIPDF" dvipdfmx dvipdfm dvipdf dvi2pdf dvitopdf; do + if findprog $i; then + dvipdf=$i + fi + done + fi + # These tools have varying interfaces, some 'input output', others + # 'input -o output'. They all seem to accept 'input' only, + # outputting using the expected file name. + run $dvipdf "$1" + if test ! -f `echo "$1" | $SED -e 's/\.dvi$/.pdf/'`; then + error 1 "cannot find output file" + fi +} + +# run_tex_suite () +# ---------------- +# Run the TeX tools until a fix point is reached. +run_tex_suite () +{ + # Move to the working directory. + if $tidy; then + verbose "cd $work_build" + cd "$work_build" || exit 1 + fi + + # Count the number of cycles. + local cycle=0 + + while :; do + # check for probably LaTeX loop (e.g. varioref) + if test $cycle -eq "$max_iters"; then + error 0 "Maximum of $max_iters cycles exceeded" + break + fi + + # report progress + cycle=`expr $cycle + 1` + verbose "Cycle $cycle for $command_line_filename" + + xref_files_save + + # We run bibtex first, because it's more likely for the indexes + # to change after bibtex is run than the reverse, though either + # would be rare. + run_bibtex + run_index + run_core_conversion + + xref_files_changed || break + done + + # If we were using thumbpdf and producing PDF, then run thumbpdf + # and TeX one last time. + run_thumbpdf + + # If we are using tex4ht, call it. + run_tex4ht + + # Install the result if we didn't already (i.e., if the output is + # dvipdf or ps). + case $latex2html:$out_lang in + *:dvipdf) + run_dvipdf "$in_noext.`out_lang_tex`" + move_to_dest "$in_noext.`out_lang_ext`" + ;; + *:ps) + : ${DVIPS:=dvips} + run $DVIPS -o "$in_noext.`out_lang_ext`" "$in_noext.`out_lang_tex`" + move_to_dest "$in_noext.`out_lang_ext`" + ;; + esac + + cd_orig +} + +## -------------------------------- ## +## TeX processing auxiliary tools. ## +## -------------------------------- ## + + +# A sed script that preprocesses Texinfo sources in order to keep the +# iftex sections only. We want to remove non-TeX sections, and comment +# (with `@c _texi2dvi') TeX sections so that makeinfo does not try to +# parse them. Nevertheless, while commenting TeX sections, don't +# comment @macro/@end macro so that makeinfo does propagate them. +# Unfortunately makeinfo --iftex --no-ifinfo doesn't work well enough +# (yet), makeinfo can't parse the TeX commands, so work around with sed. +# +# We assume that `@c _texi2dvi' starting a line is not present in the +# document. +# +comment_iftex=\ +'/^@tex/,/^@end tex/{ + s/^/@c _texi2dvi/ +} +/^@iftex/,/^@end iftex/{ + s/^/@c _texi2dvi/ + /^@c _texi2dvi@macro/,/^@c _texi2dvi@end macro/{ + s/^@c _texi2dvi// + } +} +/^@ifnottex/,/^@end ifnottex/{ + s/^/@c (_texi2dvi)/ +} +/^@ifinfo/,/^@end ifinfo/{ + /^@node/p + /^@menu/,/^@end menu/p + t + s/^/@c (_texi2dvi)/ +} +s/^@ifnotinfo/@c _texi2dvi@ifnotinfo/ +s/^@end ifnotinfo/@c _texi2dvi@end ifnotinfo/' + +# Uncommenting is simpler: remove any leading `@c texi2dvi'; repeated +# copies can sneak in via macro invocations. +uncomment_iftex='s/^@c _texi2dvi\(@c _texi2dvi\)*//' + + +# run_makeinfo () +# --------------- +# Expand macro commands in the original source file using Makeinfo. +# Always use `end' footnote style, since the `separate' style +# generates different output (arguably this is a bug in -E). Discard +# main info output, the user asked to run TeX, not makeinfo. +run_makeinfo () +{ + test $in_lang = texinfo \ + || return 0 + + # Unless required by the user, makeinfo expansion is wanted only + # if texinfo.tex is too old. + if $expand; then + makeinfo=${MAKEINFO:-makeinfo} + else + # Check if texinfo.tex performs macro expansion by looking for + # its version. The version is a date of the form YEAR-MO-DA. + # We don't need to use [0-9] to match the digits since anyway + # the comparison with $txiprereq, a number, will fail with non-digits. + # Run in a temporary directory to avoid leaving files. + version_test_dir=$t2ddir/version_test + ensure_dir "$version_test_dir" + if ( + cd "$version_test_dir" + echo '\input texinfo.tex @bye' >txiversion.tex + # Be sure that if tex wants to fail, it is not interactive: + # close stdin. + $TEX txiversion.tex txiversion.out 2>txiversion.err + ); then :; else + report "texinfo.tex appears to be broken. +This may be due to the environment variable TEX set to something +other than (plain) tex, a corrupt texinfo.tex file, or +to tex itself simply not working." + cat "$version_test_dir/txiversion.out" + cat "$version_test_dir/txiversion.err" >&2 + error 1 "quitting." + fi + eval `$SED -n 's/^.*\[\(.*\)version \(....\)-\(..\)-\(..\).*$/txiformat=\1 txiversion="\2\3\4"/p' "$version_test_dir/txiversion.out"` + verbose "texinfo.tex preloaded as \`$txiformat', version is \`$txiversion' ..." + if test "$txiprereq" -le "$txiversion" >&6 2>&1; then + makeinfo= + else + makeinfo=${MAKEINFO:-makeinfo} + fi + # If TeX is preloaded, offer the user this convenience: + if test "$txiformat" = Texinfo; then + escape=@ + fi + fi + + if test -n "$makeinfo"; then + # in_src: the file with macros expanded. + # Use the same basename to generate the same aux file names. + work_src=$workdir/src + ensure_dir "$work_src" + in_src=$work_src/$in_base + local miincludes + miincludes=`list_prefix includes -I` + verbose "Macro-expanding $command_line_filename to $in_src ..." + # eval $makeinfo because it might be defined as something complex + # (running missing) and then we end up with things like '"-I"', + # and "-I" (including the quotes) is not an option name. This + # happens with gettext 0.14.5, at least. + $SED "$comment_iftex" "$command_line_filename" \ + | eval $makeinfo --footnote-style=end -I "$in_dir" $miincludes \ + -o /dev/null --macro-expand=- \ + | $SED "$uncomment_iftex" >"$in_src" + # Continue only if everything succeeded. + if test $? -ne 0 \ + || test ! -r "$in_src"; then + verbose "Expansion failed, ignored..."; + else + in_input=$in_src + fi + fi +} + +# insert_commands () +# ------------------ +# Used most commonly for @finalout, @smallbook, etc. +insert_commands () +{ + if test -n "$textra"; then + # _xtr. The file with the user's extra commands. + work_xtr=$workdir/xtr + in_xtr=$work_xtr/$in_base + ensure_dir "$work_xtr" + verbose "Inserting extra commands: $textra" + local textra_cmd + case $in_lang in + latex) textra_cmd=1i;; + texinfo) textra_cmd='/^@setfilename/a';; + *) error 1 "internal error, unknown language: $in_lang";; + esac + $SED "$textra_cmd\\ +$textra" "$in_input" >"$in_xtr" + in_input=$in_xtr + fi + + case $in_lang:$latex2html:`out_lang_tex` in + latex:tex4ht:html) + # _tex4ht. The file with the added \usepackage{tex4ht}. + work_tex4ht=$workdir/tex4ht + in_tex4ht=$work_tex4ht/$in_base + ensure_dir "$work_tex4ht" + verbose "Inserting \\usepackage{tex4ht}" + perl -pe 's<\\documentclass(?:\[.*\])?{.*}> + <$&\\usepackage[xhtml]{tex4ht}>' \ + "$in_input" >"$in_tex4ht" + in_input=$in_tex4ht + ;; + esac +} + +# compute_language FILENAME +# ------------------------- +# Return the short string describing the language in which FILENAME +# is written: `texinfo' or `latex'. +compute_language () +{ + # If the user explicitly specified the language, use that. + # Otherwise, if the first line is \input texinfo, assume it's texinfo. + # Otherwise, guess from the file extension. + if test -n "$set_language"; then + echo $set_language + elif $SED 1q "$1" | grep 'input texinfo' >&6; then + echo texinfo + else + # Get the type of the file (latex or texinfo) from the given language + # we just guessed, or from the file extension if not set yet. + case $1 in + *.ltx | *.tex | *.drv | *.dtx) echo latex;; + *) echo texinfo;; + esac + fi +} + + +# run_hevea (MODE) +# ---------------- +# Convert to HTML/INFO/TEXT. +# +# Don't pass `-noiso' to hevea: it's useless in HTML since anyway the +# charset is set to latin1, and troublesome in other modes since +# accented characters loose their accents. +# +# Don't pass `-o DEST' to hevea because in that case it leaves all its +# auxiliary files there too... Too bad, because it means we will need +# to handle images some day. +run_hevea () +{ + local hevea="${HEVEA:-hevea}" + local run_hevea="$hevea" + + case $1 in + html) ;; + text|info) run_hevea="$run_hevea -$1";; + *) error 1 "run_hevea: invalid argument: $1";; + esac + + # Compiling to the tmp directory enables to preserve a previous + # successful compilation. + run_hevea="$run_hevea -fix -O -o '$out_base'" + run_hevea="$run_hevea `list_prefix includes -I` -I '$orig_pwd' " + run_hevea="$run_hevea '$in_input'" + + if $debug; then + run_hevea="$run_hevea -v -v" + fi + + verbose "running $run_hevea" + if eval "$run_hevea" >&5; then + # hevea leaves trailing white spaces, this is annoying. + case $1 in text|info) + perl -pi -e 's/[ \t]+$//g' "$out_base"*;; + esac + case $1 in + html|text) move_to_dest "$out_base";; + info) # There can be foo.info-1, foo.info-2 etc. + move_to_dest "$out_base"*;; + esac + else + error 1 "$hevea exited with bad status, quitting." + fi +} + + +# run_core_conversion () +# ---------------------- +# Run the TeX (or HeVeA). +run_core_conversion () +{ + case $in_lang:$latex2html:`out_lang_tex` in + *:dvi|*:pdf|latex:tex4ht:html) + run_tex;; + latex:*:html|latex:*:text|latex:*:info) + run_hevea $out_lang;; + *) + error 1 "invalid input/output combination: $in_lang/$out_lang";; + esac +} + + +# compile () +# ---------- +# Run the full compilation chain, from pre-processing to installation +# of the output at its expected location. +compile () +{ + # Source file might include additional sources. + # We want `.:$orig_pwd' before anything else. (We'll add `.:' later + # after all other directories have been turned into absolute paths.) + # `.' goes first to ensure that any old .aux, .cps, + # etc. files in ${directory} don't get used in preference to fresher + # files in `.'. Include orig_pwd in case we are in clean build mode, where + # we have cd'd to a temp directory. + common="$orig_pwd$path_sep$in_dir$path_sep" + # + # If we have any includes, put those at the end. + # Keep a final path_sep to get the default (system) TeX directories included. + txincludes=`list_infix includes $path_sep` + test -n "$txincludes" && common="$common$txincludes$path_sep" + # + for var in $tex_envvars; do + eval val="\$common\$${var}_orig" + # Convert relative paths to absolute paths, so we can run in another + # directory (e.g., in clean build mode, or during the macro-support + # detection). ".:" is added here. + val=`absolute_filenames "$val"` + eval $var="\"$val\"" + export $var + eval verbose \"$var=\'\$${var}\'\" + done + + # --expand + run_makeinfo + + # --command, --texinfo + insert_commands + + # Run until a fix point is reached. + run_tex_suite +} + + +# remove FILES +# ------------ +remove () +{ + verbose "Removing" "$@" + rm -rf "$@" +} + + +# mostly_clean +# ------------ +# Remove auxiliary files and directories. Changes the current directory. +mostly_clean () +{ + cd_orig + set X "$t2ddir" + shift + $tidy || { + local log="$work_build/$in_noext.log" + set X ${1+"$@"} "$log" `generated_files_get "$work_build/$in_noext"` + shift + } + remove ${1+"$@"} +} + + +# cleanup () +# ---------- +# Remove what should be removed according to options. +# Called at the end of each compilation cycle, and at the end of +# the script. Changes the current directory. +cleanup () +{ + case $build_mode in + local) cd_orig; remove "$t2ddir";; + clean) mostly_clean;; + tidy) ;; + esac +} + + + +## ---------------------- ## +## Command line parsing. ## +## ---------------------- ## + +# Push a token among the arguments that will be used to notice when we +# ended options/arguments parsing. +# Use "set dummy ...; shift" rather than 'set - ..." because on +# Solaris set - turns off set -x (but keeps set -e). +# Use ${1+"$@"} rather than "$@" because Digital Unix and Ultrix 4.3 +# still expand "$@" to a single argument (the empty string) rather +# than nothing at all. +arg_sep="$$--$$" +set dummy ${1+"$@"} "$arg_sep"; shift + +# +# Parse command line arguments. +while test x"$1" != x"$arg_sep"; do + + # Handle --option=value by splitting apart and putting back on argv. + case "$1" in + --*=*) + opt=`echo "$1" | $SED -e 's/=.*//'` + val=`echo "$1" | $SED -e 's/[^=]*=//'` + shift + set dummy "$opt" "$val" ${1+"$@"}; shift + ;; + esac + + case "$1" in + -@ ) escape=@;; + -~ ) catcode_special=false;; + # Silently and without documentation accept -b and --b[atch] as synonyms. + -b | --batch) batch=true;; + --build) shift; build_mode=$1;; + --build-dir) shift; build_dir=$1; build_mode=tidy;; + -c | --clean) build_mode=clean;; + -D | --debug) debug=true;; + -e | -E | --expand) expand=true;; + -h | --help) usage;; + -I) shift; list_concat_dirs includes "$1";; + -l | --lang | --language) shift; set_language=$1;; + --mostly-clean) action=mostly-clean;; + --no-line-error) line_error=false;; + --max-iterations) shift; max_iters=$1;; + -o | --out | --output) + shift + # Make it absolute, just in case we also have --clean, or whatever. + oname=`absolute "$1"`;; + + # Output formats. + -O|--output-format) shift; out_lang_set "$1";; + --dvi|--dvipdf|--html|--info|--pdf|--ps|--text) + out_lang_set `echo "x$1" | $SED 's/^x--//'`;; + + -p) out_lang_set pdf;; + -q | -s | --quiet | --silent) quiet=true; batch=true;; + --src-specials) src_specials=--src-specials;; + --shell-escape) shell_escape=--shell-escape;; + --tex4ht) latex2html=tex4ht;; + -t | --texinfo | --command ) shift; textra="$textra\\ +"`echo "$1" | $SED 's/\\\\/\\\\\\\\/g'`;; + --translate-file ) shift; translate_file="$1";; + --tidy) build_mode=tidy;; + -v | --vers*) version;; + -V | --verb*) verb=true;; + --) # What remains are not options. + shift + while test x"$1" != x"$arg_sep"; do + set dummy ${1+"$@"} "$1"; shift + shift + done + break;; + -*) + error 1 "Unknown or ambiguous option \`$1'." \ + "Try \`--help' for more information." + ;; + *) set dummy ${1+"$@"} "$1"; shift;; + esac + shift +done +# Pop the token +shift + +# $tidy: compile in a t2d directory. +# $clean: remove all the aux files. +case $build_mode in + local) clean=false; tidy=false;; + tidy) clean=false; tidy=true;; + clean) clean=true; tidy=true;; + *) error 1 "invalid build mode: $build_mode";; +esac + +# Interpret remaining command line args as filenames. +case $# in + 0) + error 2 "Missing file arguments." "Try \`--help' for more information." + ;; + 1) ;; + *) + if test -n "$oname"; then + error 2 "Can't use option \`--output' with more than one argument." + fi + ;; +esac + + +# We can't do much without tex. +# +if findprog ${TEX:-tex}; then :; else cat </dev/null +else + exec 5>&1 +fi + + +# Enable tracing, and auxiliary tools output. +# +# This fd should be used where you'd typically use /dev/null to throw +# output away. But sometimes it is convenient to see that output (e.g., +# from a grep) to aid debugging. Especially debugging at distance, via +# the user. +# +if $debug; then + exec 6>&1 + set -vx +else + exec 6>/dev/null +fi + +# + +# input_file_name_decode +# ---------------------- +# Decode COMMAND_LINE_FILENAME, and compute: +# - COMMAND_LINE_FILENAME clean of TeX commands +# - IN_DIR +# The directory to the input file, possibly absolute if needed. +# - IN_DIR_ABS +# The absolute directory of the input file. +# - IN_BASE +# The input file base name (no directory part). +# - IN_NOEXT +# The input file name without extensions (nor directory part). +# - IN_INPUT +# Defaults to COMMAND_LINE_FILENAME, but might change if the +# input is preprocessed. With directory, possibly absolute. +input_file_name_decode () +{ + # See if we are run from within AUC-Tex, in which case we are + # passed `\input{FOO.tex}' or even `\nonstopmode\input{FOO.tex}'. + case $command_line_filename in + *\\nonstopmode*) + batch=true;; + esac + case $command_line_filename in + *\\input{*}*) + # Let AUC-TeX error parser deal with line numbers. + line_error=false + command_line_filename=`\ + expr X"$command_line_filename" : X'.*input{\([^}]*\)}'` + ;; + esac + + # If the COMMAND_LINE_FILENAME is not absolute (e.g., --debug.tex), + # prepend `./' in order to avoid that the tools take it as an option. + echo "$command_line_filename" | LC_ALL=C $EGREP '^(/|[A-Za-z]:/)' >&6 \ + || command_line_filename="./$command_line_filename" + + # See if the file exists. If it doesn't we're in trouble since, even + # though the user may be able to reenter a valid filename at the tex + # prompt (assuming they're attending the terminal), this script won't + # be able to find the right xref files and so forth. + test -r "$command_line_filename" \ + || error 1 "cannot read $command_line_filename, skipping." + + # Get the name of the current directory. + in_dir=`func_dirname "$command_line_filename"` + in_dir_abs=`absolute "$in_dir"` + # In a clean build, we `cd', so get an absolute file name. + if $tidy; then + in_dir=$in_dir_abs + fi + + # Strip directory part but leave extension. + in_base=`basename "$command_line_filename"` + # Strip extension. + in_noext=`noext "$in_base"` + + # The normalized file name to compile. Must always point to the + # file to actually compile (in case of recoding, macro-expansion etc.). + in_input=$in_dir/$in_base + + + # Compute the output file name. + if test x"$oname" != x; then + out_name=$oname + else + out_name=$in_noext.`out_lang_ext` + fi + out_dir=`func_dirname "$out_name"` + out_dir_abs=`absolute "$out_dir"` + out_base=`basename "$out_name"` + out_noext=`noext "$out_base"` +} + + +## -------------- ## +## TeXify files. ## +## -------------- ## + +for command_line_filename +do + verbose "Processing $command_line_filename ..." + + input_file_name_decode + + # `texinfo' or `latex'? + in_lang=`compute_language "$command_line_filename"` + + # An auxiliary directory used for all the auxiliary tasks involved + # in compiling this document. + case $build_dir in + '' | . ) t2ddir=$out_noext.t2d ;; + *) # Avoid collisions between multiple occurrences of the same + # file, so depend on the output path. Remove leading `./', + # at least to avoid creating a file starting with `.!', i.e., + # an invisible file. The sed expression is fragile if the cwd + # has active characters. Transform / into ! so that we don't + # need `mkdir -p'. It might be something to reconsider. + t2ddir=$build_dir/`echo "$out_dir_abs/$out_noext.t2d" | + $SED "s,^$orig_pwd/,,;s,^\./,,;s,/,!,g"` + esac + # Remove it at exit if clean mode. + trap "cleanup" 0 1 2 15 + + ensure_dir "$build_dir" "$t2ddir" + + # We will change directory, better work with an absolute path... + t2ddir=`absolute "$t2ddir"` + # Sometimes there are incompatibilities between auxiliary files for + # DVI and PDF. The contents can also change whether we work on PDF + # and/or DVI. So keep separate spaces for each. + workdir=$t2ddir/`out_lang_tex` + ensure_dir "$workdir" + + # _build. In a tidy build, where the auxiliary files are output. + if $tidy; then + work_build=$workdir/build + else + work_build=. + fi + + # _bak. Copies of the previous auxiliary files (another round is + # run if they differ from the new ones). + work_bak=$workdir/bak + + # Make those directories. + ensure_dir "$work_build" "$work_bak" + + case $action in + compile) + # Compile the document. + compile + cleanup + ;; + + mostly-clean) + mostly_clean + ;; + esac +done + +verbose "done." +exit 0 # exit successfully, not however we ended the loop. diff --git a/readline/readline/doc/texi2html b/readline/readline/doc/texi2html new file mode 100755 index 0000000000..13b55884c3 --- /dev/null +++ b/readline/readline/doc/texi2html @@ -0,0 +1,5428 @@ +#! /usr/bin/perl +'di '; +'ig 00 '; +#+############################################################################## +# +# texi2html: Program to transform Texinfo documents to HTML +# +# Copyright (C) 1999, 2000 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# +#-############################################################################## + +# This requires perl version 5 or higher +require 5.0; + +#++############################################################################## +# +# NOTE FOR DEBUGGING THIS SCRIPT: +# You can run 'perl texi2html.pl' directly, provided you have +# the environment variable T2H_HOME set to the directory containing +# the texi2html.init file +# +#--############################################################################## + +# CVS version: +# $Id: texi2html.pl,v 1.55 2000/07/27 14:39:41 obachman Exp $ + +# Homepage: +$T2H_HOMEPAGE = < (original author) + Karl Berry + Olaf Bachmann + and many others. +Maintained by: Olaf Bachmann +Send bugs and suggestions to +EOT + +# Version: set in configure.in +$THISVERSION = '1.64'; +$THISPROG = "texi2html $THISVERSION"; # program name and version + +# The man page for this program is included at the end of this file and can be +# viewed using the command 'nroff -man texi2html'. + +# Identity: + +$T2H_TODAY = &pretty_date; # like "20 September 1993" +# the eval prevents this from breaking on system which do not have +# a proper getpwuid implemented +eval { ($T2H_USER = (getpwuid ($<))[6]) =~ s/,.*//;}; # Who am i + +#+++############################################################################ +# # +# Initialization # +# Pasted content of File $(srcdir)/texi2html.init: Default initializations # +# # +#---############################################################################ + +# leave this within comments, and keep the require statement +# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init +# exists. + +# +# -*-perl-*- +###################################################################### +# File: texi2html.init +# +# Sets default values for command-line arguments and for various customizable +# procedures +# +# A copy of this file is pasted into the beginning of texi2html by +# 'make texi2html' +# +# Copy this file and make changes to it, if you like. +# Afterwards, either, load it with command-line option -init_file +# +# $Id: texi2html.init,v 1.34 2000/07/27 14:09:02 obachman Exp $ + +###################################################################### +# stuff which can also be set by command-line options +# +# +# Note: values set here, overwrite values set by the command-line +# options before -init_file and might still be overwritten by +# command-line arguments following the -init_file option +# + +# T2H_OPTIONS is a hash whose keys are the (long) names of valid +# command-line options and whose values are a hash with the following keys: +# type ==> one of !|=i|:i|=s|:s (see GetOpt::Long for more info) +# linkage ==> ref to scalar, array, or subroutine (see GetOpt::Long for more info) +# verbose ==> short description of option (displayed by -h) +# noHelp ==> if 1 -> for "not so important options": only print description on -h 1 +# 2 -> for obsolete options: only print description on -h 2 + +$T2H_DEBUG = 0; +$T2H_OPTIONS -> {debug} = +{ + type => '=i', + linkage => \$main::T2H_DEBUG, + verbose => 'output HTML with debuging information', +}; + +$T2H_DOCTYPE = ''; +$T2H_OPTIONS -> {doctype} = +{ + type => '=s', + linkage => \$main::T2H_DOCTYPE, + verbose => 'document type which is output in header of HTML files', + noHelp => 1 +}; + +$T2H_CHECK = 0; +$T2H_OPTIONS -> {check} = +{ + type => '!', + linkage => \$main::T2H_CHECK, + verbose => 'if set, only check files and output all things that may be Texinfo commands', + noHelp => 1 +}; + +# -expand +# if set to "tex" (or, "info") expand @iftex and @tex (or, @ifinfo) sections +# else, neither expand @iftex, @tex, nor @ifinfo sections +$T2H_EXPAND = "info"; +$T2H_OPTIONS -> {expand} = +{ + type => '=s', + linkage => \$T2H_EXPAND, + verbose => 'Expand info|tex|none section of texinfo source', +}; + +# - glossary +#if set, uses section named `Footnotes' for glossary +$T2H_USE_GLOSSARY = 0; +T2H_OPTIONS -> {glossary} = +{ + type => '!', + linkage => \$T2H_USE_GLOSSARY, + verbose => "if set, uses section named `Footnotes' for glossary", + noHelp => 1, +}; + + +# -invisible +# $T2H_INVISIBLE_MARK is the text used to create invisible destination +# anchors for index links (you can for instance use the invisible.xbm +# file shipped with this program). This is a workaround for a known +# bug of many WWW browsers, including netscape. +# For me, it works fine without it -- on the contrary: if there, it +# inserts space between headers and start of text (obachman 3/99) +$T2H_INVISIBLE_MARK = ''; +# $T2H_INVISIBLE_MARK = ' '; +$T2H_OPTIONS -> {invisible} = +{ + type => '=s', + linkage => \$T2H_INVISIBLE_MARK, + verbose => 'use text in invisble anchot', + noHelp => 1, +}; + +# -iso +# if set, ISO8879 characters are used for special symbols (like copyright, etc) +$T2H_USE_ISO = 0; +$T2H_OPTIONS -> {iso} = +{ + type => 'iso', + linkage => \$T2H_USE_ISO, + verbose => 'if set, ISO8879 characters are used for special symbols (like copyright, etc)', + noHelp => 1, +}; + +# -I +# list directories where @include files are searched for (besides the +# directory of the doc file) additional '-I' args add to this list +@T2H_INCLUDE_DIRS = ("."); +$T2H_OPTIONS -> {I} = +{ + type => '=s', + linkage => \@T2H_INCLUDE_DIRS, + verbose => 'append $s to the @include search path', +}; + +# -top_file +# uses file of this name for top-level file +# extension is manipulated appropriately, if necessary. +# If empty, .html is used +# Typically, you would set this to "index.html". +$T2H_TOP_FILE = ''; +$T2H_OPTIONS -> {top_file} = +{ + type => '=s', + linkage => \$T2H_TOP_FILE, + verbose => 'use $s as top file, instead of .html', +}; + + +# -toc_file +# uses file of this name for table of contents file +# extension is manipulated appropriately, if necessary. +# If empty, _toc.html is used +$T2H_TOC_FILE = ''; +$T2H_OPTIONS -> {toc_file} = +{ + type => '=s', + linkage => \$T2H_TOC_FILE, + verbose => 'use $s as ToC file, instead of _toc.html', +}; + +# -frames +# if set, output two additional files which use HTML 4.0 "frames". +$T2H_FRAMES = 0; +$T2H_OPTIONS -> {frames} = +{ + type => '!', + linkage => \$T2H_FRAMES, + verbose => 'output files which use HTML 4.0 frames (experimental)', + noHelp => 1, +}; + + +# -menu | -nomenu +# if set, show the Texinfo menus +$T2H_SHOW_MENU = 1; +$T2H_OPTIONS -> {menu} = +{ + type => '!', + linkage => \$T2H_SHOW_MENU, + verbose => 'ouput Texinfo menus', +}; + +# -number | -nonumber +# if set, number sections and show section names and numbers in references +# and menus +$T2H_NUMBER_SECTIONS = 1; +$T2H_OPTIONS -> {number} = +{ + type => '!', + linkage => \$T2H_NUMBER_SECTIONS, + verbose => 'use numbered sections' +}; + +# if set, and T2H_NUMBER_SECTIONS is set, then use node names in menu +# entries, instead of section names +$T2H_NODE_NAME_IN_MENU = 0; + +# if set and menu entry equals menu descr, then do not print menu descr. +# Likewise, if node name equals entry name, do not print entry name. +$T2H_AVOID_MENU_REDUNDANCY = 1; + +# -split section|chapter|none +# if set to 'section' (resp. 'chapter') create one html file per (sub)section +# (resp. chapter) and separate pages for Top, ToC, Overview, Index, +# Glossary, About. +# otherwise, create monolithic html file which contains whole document +#$T2H_SPLIT = 'section'; +$T2H_SPLIT = ''; +$T2H_OPTIONS -> {split} = +{ + type => '=s', + linkage => \$T2H_SPLIT, + verbose => 'split document on section|chapter else no splitting', +}; + +# -section_navigation|-no-section_navigation +# if set, then navigation panels are printed at the beginning of each section +# and, possibly at the end (depending on whether or not there were more than +# $T2H_WORDS_IN_PAGE words on page +# This is most useful if you do not want to have section navigation +# on -split chapter +$T2H_SECTION_NAVIGATION = 1; +$T2H_OPTIONS -> {sec_nav} = +{ + type => '!', + linkage => \$T2H_SECTION_NAVIGATION, + verbose => 'output navigation panels for each section', +}; + +# -subdir +# if set put result files in this directory +# if not set result files are put into current directory +#$T2H_SUBDIR = 'html'; +$T2H_SUBDIR = ''; +$T2H_OPTIONS -> {subdir} = +{ + type => '=s', + linkage => \$T2H_SUBDIR, + verbose => 'put HTML files in directory $s, instead of $cwd', +}; + +# -short_extn +# If this is set all HTML file will have extension ".htm" instead of +# ".html". This is helpful when shipping the document to PC systems. +$T2H_SHORTEXTN = 0; +$T2H_OPTIONS -> {short_ext} = +{ + type => '!', + linkage => \$T2H_SHORTEXTN, + verbose => 'use "htm" extension for output HTML files', +}; + + +# -prefix +# Set the output file prefix, prepended to all .html, .gif and .pl files. +# By default, this is the basename of the document +$T2H_PREFIX = ''; +$T2H_OPTIONS -> {prefix} = +{ + type => '=s', + linkage => \$T2H_PREFIX, + verbose => 'use as prefix for output files, instead of ', +}; + +# -o filename +# If set, generate monolithic document output html into $filename +$T2H_OUT = ''; +$T2H_OPTIONS -> {out_file} = +{ + type => '=s', + linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';}, + verbose => 'if set, all HTML output goes into file $s', +}; + +# -short_ref +#if set cross-references are given without section numbers +$T2H_SHORT_REF = ''; +$T2H_OPTIONS -> {short_ref} = +{ + type => '!', + linkage => \$T2H_SHORT_REF, + verbose => 'if set, references are without section numbers', +}; + +# -idx_sum +# if value is set, then for each @prinindex $what +# $docu_name_$what.idx is created which contains lines of the form +# $key\t$ref sorted alphabetically (case matters) +$T2H_IDX_SUMMARY = 0; +$T2H_OPTIONS -> {idx_sum} = +{ + type => '!', + linkage => \$T2H_IDX_SUMMARY, + verbose => 'if set, also output index summary', + noHelp => 1, +}; + +# -verbose +# if set, chatter about what we are doing +$T2H_VERBOSE = ''; +$T2H_OPTIONS -> {Verbose} = +{ + type => '!', + linkage => \$T2H_VERBOSE, + verbose => 'print progress info to stdout', +}; + +# -lang +# For page titles use $T2H_WORDS->{$T2H_LANG}->{...} as title. +# To add a new language, supply list of titles (see $T2H_WORDS below). +# and use ISO 639 language codes (see e.g. perl module Locale-Codes-1.02 +# for definitions) +# Default's to 'en' if not set or no @documentlanguage is specified +$T2H_LANG = ''; +$T2H_OPTIONS -> {lang} = +{ + type => '=s', + linkage => sub {SetDocumentLanguage($_[1])}, + verbose => 'use $s as document language (ISO 639 encoding)', +}; + +# -l2h +# if set, uses latex2html for generation of math content +$T2H_L2H = ''; +$T2H_OPTIONS -> {l2h} = +{ + type => '!', + linkage => \$T2H_L2H, + verbose => 'if set, uses latex2html for @math and @tex', +}; + +###################### +# The following options are only relevant if $T2H_L2H is set +# +# -l2h_l2h +# name/location of latex2html progam +$T2H_L2H_L2H = "latex2html"; +$T2H_OPTIONS -> {l2h_l2h} = +{ + type => '=s', + linkage => \$T2H_L2H_L2H, + verbose => 'program to use for latex2html translation', + noHelp => 1, +}; + +# -l2h_skip +# if set, skips actual call to latex2html tries to reuse previously generated +# content, instead +$T2H_L2H_SKIP = ''; +$T2H_OPTIONS -> {l2h_skip} = +{ + type => '!', + linkage => \$T2H_L2H_SKIP, + verbose => 'if set, tries to reuse previously latex2html output', + noHelp => 1, +}; + +# -l2h_tmp +# if set, l2h uses this directory for temporarary files. The path +# leading to this directory may not contain a dot (i.e., a "."), +# otherwise, l2h will fail +$T2H_L2H_TMP = ''; +$T2H_OPTIONS -> {l2h_tmp} = +{ + type => '=s', + linkage => \$T2H_L2H_TMP, + verbose => 'if set, uses $s as temporary latex2html directory', + noHelp => 1, +}; + +# if set, cleans intermediate files (they all have the prefix $doc_l2h_) +# of l2h +$T2H_L2H_CLEAN = 1; +$T2H_OPTIONS -> {l2h_clean} = +{ + type => '!', + linkage => \$T2H_L2H_CLEAN, + verbose => 'if set, do not keep intermediate latex2html files for later reuse', + noHelp => 1, +}; + +$T2H_OPTIONS -> {D} = +{ + type => '=s', + linkage => sub {$main::value{@_[1]} = 1;}, + verbose => 'equivalent to Texinfo "@set $s 1"', + noHelp => 1, +}; + +$T2H_OPTIONS -> {init_file} = +{ + type => '=s', + linkage => \&LoadInitFile, + verbose => 'load init file $s' +}; + + +############################################################################## +# +# The following can only be set in the init file +# +############################################################################## + +# if set, center @image by default +# otherwise, do not center by default +$T2H_CENTER_IMAGE = 1; + +# used as identation for block enclosing command @example, etc +# If not empty, must be enclosed in +$T2H_EXAMPLE_INDENT_CELL = ''; +# same as above, only for @small +$T2H_SMALL_EXAMPLE_INDENT_CELL = ''; +# font size for @small +$T2H_SMALL_FONT_SIZE = '-1'; + +# if non-empty, and no @..heading appeared in Top node, then +# use this as header for top node/section, otherwise use value of +# @settitle or @shorttitle (in that order) +$T2H_TOP_HEADING = ''; + +# if set, use this chapter for 'Index' button, else +# use first chapter whose name matches 'index' (case insensitive) +$T2H_INDEX_CHAPTER = ''; + +# if set and $T2H_SPLIT is set, then split index pages at the next letter +# after they have more than that many entries +$T2H_SPLIT_INDEX = 100; + +# if set (e.g., to index.html) replace hrefs to this file +# (i.e., to index.html) by ./ +$T2H_HREF_DIR_INSTEAD_FILE = ''; + +######################################################################## +# Language dependencies: +# To add a new language extend T2H_WORDS hash and create $T2H_<...>_WORDS hash +# To redefine one word, simply do: +# $T2H_WORDS->{}->{} = 'whatever' in your personal init file. +# +$T2H_WORDS_EN = +{ + # titles of pages + 'ToC_Title' => 'Table of Contents', + 'Overview_Title' => 'Short Table of Contents', + 'Index_Title' => 'Index', + 'About_Title' => 'About this document', + 'Footnotes_Title' => 'Footnotes', + 'See' => 'See', + 'see' => 'see', + 'section' => 'section', +# If necessary, we could extend this as follows: +# # text for buttons +# 'Top_Button' => 'Top', +# 'ToC_Button' => 'Contents', +# 'Overview_Button' => 'Overview', +# 'Index_button' => 'Index', +# 'Back_Button' => 'Back', +# 'FastBack_Button' => 'FastBack', +# 'Prev_Button' => 'Prev', +# 'Up_Button' => 'Up', +# 'Next_Button' => 'Next', +# 'Forward_Button' =>'Forward', +# 'FastWorward_Button' => 'FastForward', +# 'First_Button' => 'First', +# 'Last_Button' => 'Last', +# 'About_Button' => 'About' +}; + +$T2H_WORD_DE = +{ + 'ToC_Title' => 'Inhaltsverzeichniss', + 'Overview_Title' => 'Kurzes Inhaltsverzeichniss', + 'Index_Title' => 'Index', + 'About_Title' => 'Über dieses Dokument', + 'Footnotes_Title' => 'Fußnoten', + 'See' => 'Siehe', + 'see' => 'siehe', + 'section' => 'Abschnitt', +}; + +$T2H_WORD_NL = +{ + 'ToC_Title' => 'Inhoudsopgave', + 'Overview_Title' => 'Korte inhoudsopgave', + 'Index_Title' => 'Index', #Not sure ;-) + 'About_Title' => 'No translation available!', #No translation available! + 'Footnotes_Title' => 'No translation available!', #No translation available! + 'See' => 'Zie', + 'see' => 'zie', + 'section' => 'sectie', +}; + +$T2H_WORD_ES = +{ + 'ToC_Title' => 'índice General', + 'Overview_Title' => 'Resumen del Contenido', + 'Index_Title' => 'Index', #Not sure ;-) + 'About_Title' => 'No translation available!', #No translation available! + 'Footnotes_Title' => 'Fußnoten', + 'See' => 'Véase', + 'see' => 'véase', + 'section' => 'sección', +}; + +$T2H_WORD_NO = +{ + 'ToC_Title' => 'Innholdsfortegnelse', + 'Overview_Title' => 'Kort innholdsfortegnelse', + 'Index_Title' => 'Indeks', #Not sure ;-) + 'About_Title' => 'No translation available!', #No translation available! + 'Footnotes_Title' => 'No translation available!', + 'See' => 'Se', + 'see' => 'se', + 'section' => 'avsnitt', +}; + +$T2H_WORD_PT = +{ + 'ToC_Title' => 'Sumário', + 'Overview_Title' => 'Breve Sumário', + 'Index_Title' => 'Índice', #Not sure ;-) + 'About_Title' => 'No translation available!', #No translation available! + 'Footnotes_Title' => 'No translation available!', + 'See' => 'Veja', + 'see' => 'veja', + 'section' => 'Seção', +}; + +$T2H_WORDS = +{ + 'en' => $T2H_WORDS_EN, + 'de' => $T2H_WORDS_DE, + 'nl' => $T2H_WORDS_NL, + 'es' => $T2H_WORDS_ES, + 'no' => $T2H_WORDS_NO, + 'pt' => $T2H_WORDS_PT +}; + +@MONTH_NAMES_EN = +( + 'January', 'February', 'March', 'April', 'May', + 'June', 'July', 'August', 'September', 'October', + 'November', 'December' +); + +@MONTH_NAMES_DE = +( + 'Januar', 'Februar', 'März', 'April', 'Mai', + 'Juni', 'Juli', 'August', 'September', 'Oktober', + 'November', 'Dezember' +); + +@MONTH_NAMES_NL = +( + 'Januari', 'Februari', 'Maart', 'April', 'Mei', + 'Juni', 'Juli', 'Augustus', 'September', 'Oktober', + 'November', 'December' +); + +@MONTH_NAMES_ES = +( + 'enero', 'febrero', 'marzo', 'abril', 'mayo', + 'junio', 'julio', 'agosto', 'septiembre', 'octubre', + 'noviembre', 'diciembre' +); + +@MONTH_NAMES_NO = +( + + 'januar', 'februar', 'mars', 'april', 'mai', + 'juni', 'juli', 'august', 'september', 'oktober', + 'november', 'desember' +); + +@MONTH_NAMES_PT = +( + 'Janeiro', 'Fevereiro', 'Março', 'Abril', 'Maio', + 'Junho', 'Julho', 'Agosto', 'Setembro', 'Outubro', + 'Novembro', 'Dezembro' +); + + +$MONTH_NAMES = +{ + 'en' => \@MONTH_NAMES_EN, + 'de' => \@MONTH_NAMES_DE, + 'es' => \@MONTH_NAMES_ES, + 'nl' => \@MONTH_NAMES_NL, + 'no' => \@MONTH_NAMES_NO, + 'pt' => \@MONTH_NAMES_PT +}; +######################################################################## +# Control of Page layout: +# You can make changes of the Page layout at two levels: +# 1.) For small changes, it is often enough to change the value of +# some global string/hash/array variables +# 2.) For larger changes, reimplement one of the T2H_DEFAULT_* routines, +# give them another name, and assign them to the respective +# $T2H_ variable. + +# As a general interface, the hashes T2H_HREF, T2H_NAME, T2H_NODE hold +# href, html-name, node-name of +# This -- current section (resp. html page) +# Top -- top page ($T2H_TOP_FILE) +# Contents -- Table of contents +# Overview -- Short table of contents +# Index -- Index page +# About -- page which explain "navigation buttons" +# First -- first node +# Last -- last node +# +# Whether or not the following hash values are set, depends on the context +# (all values are w.r.t. 'This' section) +# Next -- next node of texinfo +# Prev -- previous node of texinfo +# Up -- up node of texinfo +# Forward -- next node in reading order +# Back -- previous node in reading order +# FastForward -- if leave node, up and next, else next node +# FastBackward-- if leave node, up and prev, else prev node +# +# Furthermore, the following global variabels are set: +# $T2H_THISDOC{title} -- title as set by @setttile +# $T2H_THISDOC{fulltitle} -- full title as set by @title... +# $T2H_THISDOC{subtitle} -- subtitle as set by @subtitle +# $T2H_THISDOC{author} -- author as set by @author +# +# and pointer to arrays of lines which need to be printed by t2h_print_lines +# $T2H_OVERVIEW -- lines of short table of contents +# $T2H_TOC -- lines of table of contents +# $T2H_TOP -- lines of Top texinfo node +# $T2H_THIS_SECTION -- lines of 'This' section + +# +# There are the following subs which control the layout: +# +$T2H_print_section = \&T2H_DEFAULT_print_section; +$T2H_print_Top_header = \&T2H_DEFAULT_print_Top_header; +$T2H_print_Top_footer = \&T2H_DEFAULT_print_Top_footer; +$T2H_print_Top = \&T2H_DEFAULT_print_Top; +$T2H_print_Toc = \&T2H_DEFAULT_print_Toc; +$T2H_print_Overview = \&T2H_DEFAULT_print_Overview; +$T2H_print_Footnotes = \&T2H_DEFAULT_print_Footnotes; +$T2H_print_About = \&T2H_DEFAULT_print_About; +$T2H_print_misc_header = \&T2H_DEFAULT_print_misc_header; +$T2H_print_misc_footer = \&T2H_DEFAULT_print_misc_footer; +$T2H_print_misc = \&T2H_DEFAULT_print_misc; +$T2H_print_chapter_header = \&T2H_DEFAULT_print_chapter_header; +$T2H_print_chapter_footer = \&T2H_DEFAULT_print_chapter_footer; +$T2H_print_page_head = \&T2H_DEFAULT_print_page_head; +$T2H_print_page_foot = \&T2H_DEFAULT_print_page_foot; +$T2H_print_head_navigation = \&T2H_DEFAULT_print_head_navigation; +$T2H_print_foot_navigation = \&T2H_DEFAULT_print_foot_navigation; +$T2H_button_icon_img = \&T2H_DEFAULT_button_icon_img; +$T2H_print_navigation = \&T2H_DEFAULT_print_navigation; +$T2H_about_body = \&T2H_DEFAULT_about_body; +$T2H_print_frame = \&T2H_DEFAULT_print_frame; +$T2H_print_toc_frame = \&T2H_DEFAULT_print_toc_frame; + +######################################################################## +# Layout for html for every sections +# +sub T2H_DEFAULT_print_section +{ + my $fh = shift; + local $T2H_BUTTONS = \@T2H_SECTION_BUTTONS; + &$T2H_print_head_navigation($fh) if $T2H_SECTION_NAVIGATION; + my $nw = t2h_print_lines($fh); + if ($T2H_SPLIT eq 'section' && $T2H_SECTION_NAVIGATION) + { + &$T2H_print_foot_navigation($fh, $nw); + } + else + { + print $fh '
    ' . "\n"; + } +} + +################################################################### +# Layout of top-page I recommend that you use @ifnothtml, @ifhtml, +# @html within the Top texinfo node to specify content of top-level +# page. +# +# If you enclose everything in @ifnothtml, then title, subtitle, +# author and overview is printed +# T2H_HREF of Next, Prev, Up, Forward, Back are not defined +# if $T2H_SPLIT then Top page is in its own html file +sub T2H_DEFAULT_print_Top_header +{ + &$T2H_print_page_head(@_) if $T2H_SPLIT; + t2h_print_label(@_); # this needs to be called, otherwise no label set + &$T2H_print_head_navigation(@_); +} +sub T2H_DEFAULT_print_Top_footer +{ + &$T2H_print_foot_navigation(@_); + &$T2H_print_page_foot(@_) if $T2H_SPLIT; +} +sub T2H_DEFAULT_print_Top +{ + my $fh = shift; + + # for redefining navigation buttons use: + # local $T2H_BUTTONS = [...]; + # as it is, 'Top', 'Contents', 'Index', 'About' are printed + local $T2H_BUTTONS = \@T2H_MISC_BUTTONS; + &$T2H_print_Top_header($fh); + if ($T2H_THIS_SECTION) + { + # if top-level node has content, then print it with extra header + print $fh "

    $T2H_NAME{Top}

    " + unless ($T2H_HAS_TOP_HEADING); + t2h_print_lines($fh, $T2H_THIS_SECTION) + } + else + { + # top-level node is fully enclosed in @ifnothtml + # print fulltitle, subtitle, author, Overview + print $fh + "
    \n

    " . + join("

    \n

    ", split(/\n/, $T2H_THISDOC{fulltitle})) . + "

    \n"; + print $fh "

    $T2H_THISDOC{subtitle}

    \n" if $T2H_THISDOC{subtitle}; + print $fh "$T2H_THISDOC{author}\n" if $T2H_THISDOC{author}; + print $fh < +
    +

    +

    Overview:

    +
    +EOT + t2h_print_lines($fh, $T2H_OVERVIEW); + print $fh "
    \n"; + } + &$T2H_print_Top_footer($fh); +} + +################################################################### +# Layout of Toc, Overview, and Footnotes pages +# By default, we use "normal" layout +# T2H_HREF of Next, Prev, Up, Forward, Back, etc are not defined +# use: local $T2H_BUTTONS = [...] to redefine navigation buttons +sub T2H_DEFAULT_print_Toc +{ + return &$T2H_print_misc(@_); +} +sub T2H_DEFAULT_print_Overview +{ + return &$T2H_print_misc(@_); +} +sub T2H_DEFAULT_print_Footnotes +{ + return &$T2H_print_misc(@_); +} +sub T2H_DEFAULT_print_About +{ + return &$T2H_print_misc(@_); +} + +sub T2H_DEFAULT_print_misc_header +{ + &$T2H_print_page_head(@_) if $T2H_SPLIT; + # this needs to be called, otherwise, no labels are set + t2h_print_label(@_); + &$T2H_print_head_navigation(@_); +} +sub T2H_DEFAULT_print_misc_footer +{ + &$T2H_print_foot_navigation(@_); + &$T2H_print_page_foot(@_) if $T2H_SPLIT; +} +sub T2H_DEFAULT_print_misc +{ + my $fh = shift; + local $T2H_BUTTONS = \@T2H_MISC_BUTTONS; + &$T2H_print_misc_header($fh); + print $fh "

    $T2H_NAME{This}

    \n"; + t2h_print_lines($fh); + &$T2H_print_misc_footer($fh); +} + +################################################################### +# chapter_header and chapter_footer are only called if +# T2H_SPLIT eq 'chapter' +# chapter_header: after print_page_header, before print_section +# chapter_footer: after print_section of last section, before print_page_footer +# +# If you want to get rid of navigation stuff after each section, +# redefine print_section such that it does not call print_navigation, +# and put print_navigation into print_chapter_header +@T2H_CHAPTER_BUTTONS = + ( + 'FastBack', 'FastForward', ' ', + ' ', ' ', ' ', ' ', + 'Top', 'Contents', 'Index', 'About', + ); + +sub T2H_DEFAULT_print_chapter_header +{ + # nothing to do there, by default + if (! $T2H_SECTION_NAVIGATION) + { + my $fh = shift; + local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS; + &$T2H_print_navigation($fh); + print $fh "\n
    \n"; + } +} + +sub T2H_DEFAULT_print_chapter_footer +{ + local $T2H_BUTTONS = \@T2H_CHAPTER_BUTTONS; + &$T2H_print_navigation(@_); +} +################################################################### +$T2H_TODAY = &pretty_date; # like "20 September 1993" + +sub pretty_date { + local($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst); + + ($sec, $min, $hour, $mday, $mon, $year, $wday, $yday, $isdst) = localtime(time); + $year += ($year < 70) ? 2000 : 1900; + # obachman: Let's do it as the Americans do + return($MONTH_NAMES->{$T2H_LANG}[$mon] . ", " . $mday . " " . $year); +} + + +################################################################### +# Layout of standard header and footer +# + +# Set the default body text, inserted between +###$T2H_BODYTEXT = 'LANG="EN" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"'; +$T2H_BODYTEXT = 'LANG="' . $T2H_LANG . '" BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#800080" ALINK="#FF0000"'; +# text inserted after +$T2H_AFTER_BODY_OPEN = ''; +#text inserted before +$T2H_PRE_BODY_CLOSE = ''; +# this is used in footer +$T2H_ADDRESS = "by $T2H_USER " if $T2H_USER; +$T2H_ADDRESS .= "on $T2H_TODAY"; +# this is added inside after and some META NAME stuff +# can be used for <style> <script>, <meta> tags +$T2H_EXTRA_HEAD = ''; + +sub T2H_DEFAULT_print_page_head +{ + my $fh = shift; + my $longtitle = "$T2H_THISDOC{title}: $T2H_NAME{This}"; + print $fh <<EOT; +<HTML> +$T2H_DOCTYPE +<!-- Created on $T2H_TODAY by $THISPROG --> +<!-- +$T2H_AUTHORS +--> +<HEAD> +<TITLE>$longtitle + + + + + + +$T2H_EXTRA_HEAD + + + +$T2H_AFTER_BODY_OPEN +EOT +} + +sub T2H_DEFAULT_print_page_foot +{ + my $fh = shift; + print $fh < + +This document was generated +$T2H_ADDRESS +using texi2html +$T2H_PRE_BODY_CLOSE + + +EOT +} + +################################################################### +# Layout of navigation panel + +# if this is set, then a vertical navigation panel is used +$T2H_VERTICAL_HEAD_NAVIGATION = 0; +sub T2H_DEFAULT_print_head_navigation +{ + my $fh = shift; + if ($T2H_VERTICAL_HEAD_NAVIGATION) + { + print $fh < +
     + +
    ' . - &t2h_anchor('', $href, $entry) . - '  ' . - $descr . - "
    ' . - $entry . - '' . $descr . - "
      
    +EOT + } + &$T2H_print_navigation($fh, $T2H_VERTICAL_HEAD_NAVIGATION); + if ($T2H_VERTICAL_HEAD_NAVIGATION) + { + print $fh < + +EOT + } + elsif ($T2H_SPLIT eq 'section') + { + print $fh "
    \n"; + } +} + +# Specifies the minimum page length required before a navigation panel +# is placed at the bottom of a page (the default is that of latex2html) +# T2H_THIS_WORDS_IN_PAGE holds number of words of current page +$T2H_WORDS_IN_PAGE = 300; +sub T2H_DEFAULT_print_foot_navigation +{ + my $fh = shift; + my $nwords = shift; + if ($T2H_VERTICAL_HEAD_NAVIGATION) + { + print $fh < +
    +EOT + } + print $fh "
    \n"; + &$T2H_print_navigation($fh) if ($nwords >= $T2H_WORDS_IN_PAGE) +} + +###################################################################### +# navigation panel +# +# specify in this array which "buttons" should appear in which order +# in the navigation panel for sections; use ' ' for empty buttons (space) +@T2H_SECTION_BUTTONS = + ( + 'Back', 'Forward', ' ', 'FastBack', 'Up', 'FastForward', + ' ', ' ', ' ', ' ', + 'Top', 'Contents', 'Index', 'About', + ); + +# buttons for misc stuff +@T2H_MISC_BUTTONS = ('Top', 'Contents', 'Index', 'About'); + +# insert here name of icon images for buttons +# Icons are used, if $T2H_ICONS and resp. value are set +%T2H_ACTIVE_ICONS = + ( + 'Top', '', + 'Contents', '', + 'Overview', '', + 'Index', '', + 'Back', '', + 'FastBack', '', + 'Prev', '', + 'Up', '', + 'Next', '', + 'Forward', '', + 'FastForward', '', + 'About' , '', + 'First', '', + 'Last', '', + ' ', '' + ); + +# insert here name of icon images for these, if button is inactive +%T2H_PASSIVE_ICONS = + ( + 'Top', '', + 'Contents', '', + 'Overview', '', + 'Index', '', + 'Back', '', + 'FastBack', '', + 'Prev', '', + 'Up', '', + 'Next', '', + 'Forward', '', + 'FastForward', '', + 'About', '', + 'First', '', + 'Last', '', + ); + +# how to create IMG tag +sub T2H_DEFAULT_button_icon_img +{ + my $button = shift; + my $icon = shift; + my $name = shift; + return qq{$button: $name}; +} + +# Names of text as alternative for icons +%T2H_NAVIGATION_TEXT = + ( + 'Top', 'Top', + 'Contents', 'Contents', + 'Overview', 'Overview', + 'Index', 'Index', + ' ', '   ', + 'Back', ' < ', + 'FastBack', ' << ', + 'Prev', 'Prev', + 'Up', ' Up ', + 'Next', 'Next', + 'Forward', ' > ', + 'FastForward', ' >> ', + 'About', ' ? ', + 'First', ' |< ', + 'Last', ' >| ' + ); + +sub T2H_DEFAULT_print_navigation +{ + my $fh = shift; + my $vertical = shift; + my $spacing = 1; + print $fh "\n"; + + print $fh "" unless $vertical; + for $button (@$T2H_BUTTONS) + { + print $fh qq{\n} if $vertical; + print $fh qq{\n"; + print $fh "\n" if $vertical; + } + print $fh "" unless $vertical; + print $fh "
    }; + + if (ref($button) eq 'CODE') + { + &$button($fh, $vertical); + } + elsif ($button eq ' ') + { # handle space button + print $fh + $T2H_ICONS && $T2H_ACTIVE_ICONS{' '} ? + &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{' '}) : + $T2H_NAVIGATION_TEXT{' '}; + next; + } + elsif ($T2H_HREF{$button}) + { # button is active + print $fh + $T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ? # use icon ? + t2h_anchor('', $T2H_HREF{$button}, # yes + &$T2H_button_icon_img($button, + $T2H_ACTIVE_ICONS{$button}, + $T2H_NAME{$button})) + : # use text + "[" . + t2h_anchor('', $T2H_HREF{$button}, $T2H_NAVIGATION_TEXT{$button}) . + "]"; + } + else + { # button is passive + print $fh + $T2H_ICONS && $T2H_PASSIVE_ICONS{$button} ? + &$T2H_button_icon_img($button, + $T2H_PASSIVE_ICONS{$button}, + $T2H_NAME{$button}) : + + "[" . $T2H_NAVIGATION_TEXT{$button} . "]"; + } + print $fh "
    \n"; +} + +###################################################################### +# Frames: this is from "Richard Y. Kim" +# Should be improved to be more conforming to other _print* functions + +sub T2H_DEFAULT_print_frame +{ + my $fh = shift; + print $fh < +$T2H_THISDOC{title} + + + + + +EOT +} + +sub T2H_DEFAULT_print_toc_frame +{ + my $fh = shift; + &$T2H_print_page_head($fh); + print $fh <Content +EOT + print $fh map {s/HREF=/target=\"main\" HREF=/; $_;} @stoc_lines; + print $fh "\n"; +} + +###################################################################### +# About page +# + +# T2H_PRE_ABOUT might be a function +$T2H_PRE_ABOUT = <texi2html +

    +EOT +$T2H_AFTER_ABOUT = ''; + +sub T2H_DEFAULT_about_body +{ + my $about; + if (ref($T2H_PRE_ABOUT) eq 'CODE') + { + $about = &$T2H_PRE_ABOUT(); + } + else + { + $about = $T2H_PRE_ABOUT; + } + $about .= <

    + + + + + + + +EOT + + for $button (@T2H_SECTION_BUTTONS) + { + next if $button eq ' ' || ref($button) eq 'CODE'; + $about .= < + + + + +EOT + } + + $about .= < +

    +where the Example assumes that the current position +is at Subsubsection One-Two-Three of a document of +the following structure: +
      +
    • 1. Section One
      • +
        +
      • 1.1 Subsection One-One
        • +
          +
        • ...
          • +
        +
      • 1.2 Subsection One-Two
        • +
          +
        • 1.2.1 Subsubsection One-Two-One +
        • 1.2.2 Subsubsection One-Two-Two +
        • 1.2.3 Subsubsection One-Two-Three     +<== Current Position +
        • 1.2.4 Subsubsection One-Two-Four +
        +
      • 1.3 Subsection One-Three
        • +
          +
        • ...
          • +
        +
      • 1.4 Subsection One-Four
        • +
      +
    +$T2H_AFTER_ABOUT +EOT + return $about; +} + + +%T2H_BUTTONS_GOTO = + ( + 'Top', 'cover (top) of document', + 'Contents', 'table of contents', + 'Overview', 'short table of contents', + 'Index', 'concept index', + 'Back', 'previous section in reading order', + 'FastBack', 'previous or up-and-previous section ', + 'Prev', 'previous section same level', + 'Up', 'up section', + 'Next', 'next section same level', + 'Forward', 'next section in reading order', + 'FastForward', 'next or up-and-next section', + 'About' , 'this page', + 'First', 'first section in reading order', + 'Last', 'last section in reading order', + ); + +%T2H_BUTTONS_EXAMPLE = +( + 'Top', '   ', + 'Contents', '   ', + 'Overview', '   ', + 'Index', '   ', + 'Back', '1.2.2', + 'FastBack', '1.1', + 'Prev', '1.2.2', + 'Up', '1.2', + 'Next', '1.2.4', + 'Forward', '1.2.4', + 'FastForward', '1.3', + 'About', '   ', + 'First', '1.', + 'Last', '1.2.4', +); + + +###################################################################### +# from here on, its l2h init stuff +# + +## initialization for latex2html as for Singular manual generation +## obachman 3/99 + +# +# Options controlling Titles, File-Names, Tracing and Sectioning +# +$TITLE = ''; + +$SHORTEXTN = 0; + +$LONG_TITLES = 0; + +$DESTDIR = ''; # should be overwritten by cmd-line argument + +$NO_SUBDIR = 0;# should be overwritten by cmd-line argument + +$PREFIX = ''; # should be overwritten by cmd-line argument + +$AUTO_PREFIX = 0; # this is needed, so that prefix settings are used + +$AUTO_LINK = 0; + +$SPLIT = 0; + +$MAX_LINK_DEPTH = 0; + +$TMP = ''; # should be overwritten by cmd-line argument + +$DEBUG = 0; + +$VERBOSE = 1; + +# +# Options controlling Extensions and Special Features +# +$HTML_VERSION = "3.2"; + +$TEXDEFS = 1; # we absolutely need that + +$EXTERNAL_FILE = ''; + +$SCALABLE_FONTS = 1; + +$NO_SIMPLE_MATH = 1; + +$LOCAL_ICONS = 1; + +$SHORT_INDEX = 0; + +$NO_FOOTNODE = 1; + +$ADDRESS = ''; + +$INFO = ''; + +# +# Switches controlling Image Generation +# +$ASCII_MODE = 0; + +$NOLATEX = 0; + +$EXTERNAL_IMAGES = 0; + +$PS_IMAGES = 0; + +$NO_IMAGES = 0; + +$IMAGES_ONLY = 0; + +$REUSE = 2; + +$ANTI_ALIAS = 1; + +$ANTI_ALIAS_TEXT = 1; + +# +#Switches controlling Navigation Panels +# +$NO_NAVIGATION = 1; +$ADDRESS = ''; +$INFO = 0; # 0 = do not make a "About this document..." section + +# +#Switches for Linking to other documents +# +# actuall -- we don't care + +$MAX_SPLIT_DEPTH = 0; # Stop making separate files at this depth + +$MAX_LINK_DEPTH = 0; # Stop showing child nodes at this depth + +$NOLATEX = 0; # 1 = do not pass unknown environments to Latex + +$EXTERNAL_IMAGES = 0; # 1 = leave the images outside the document + +$ASCII_MODE = 0; # 1 = do not use any icons or internal images + +# 1 = use links to external postscript images rather than inlined bitmap +# images. +$PS_IMAGES = 0; +$SHOW_SECTION_NUMBERS = 0; + +### Other global variables ############################################### +$CHILDLINE = ""; + +# This is the line width measured in pixels and it is used to right justify +# equations and equation arrays; +$LINE_WIDTH = 500; + +# Used in conjunction with AUTO_NAVIGATION +$WORDS_IN_PAGE = 300; + +# Affects ONLY the way accents are processed +$default_language = 'english'; + +# The value of this variable determines how many words to use in each +# title that is added to the navigation panel (see below) +# +$WORDS_IN_NAVIGATION_PANEL_TITLES = 0; + +# This number will determine the size of the equations, special characters, +# and anything which will be converted into an inlined image +# *except* "image generating environments" such as "figure", "table" +# or "minipage". +# Effective values are those greater than 0. +# Sensible values are between 0.1 - 4. +$MATH_SCALE_FACTOR = 1.5; + +# This number will determine the size of +# image generating environments such as "figure", "table" or "minipage". +# Effective values are those greater than 0. +# Sensible values are between 0.1 - 4. +$FIGURE_SCALE_FACTOR = 1.6; + + +# If both of the following two variables are set then the "Up" button +# of the navigation panel in the first node/page of a converted document +# will point to $EXTERNAL_UP_LINK. $EXTERNAL_UP_TITLE should be set +# to some text which describes this external link. +$EXTERNAL_UP_LINK = ""; +$EXTERNAL_UP_TITLE = ""; + +# If this is set then the resulting HTML will look marginally better if viewed +# with Netscape. +$NETSCAPE_HTML = 1; + +# Valid paper sizes are "letter", "legal", "a4","a3","a2" and "a0" +# Paper sizes has no effect other than in the time it takes to create inlined +# images and in whether large images can be created at all ie +# - larger paper sizes *MAY* help with large image problems +# - smaller paper sizes are quicker to handle +$PAPERSIZE = "a4"; + +# Replace "english" with another language in order to tell LaTeX2HTML that you +# want some generated section titles (eg "Table of Contents" or "References") +# to appear in a different language. Currently only "english" and "french" +# is supported but it is very easy to add your own. See the example in the +# file "latex2html.config" +$TITLES_LANGUAGE = "english"; + +1; # This must be the last non-comment line + +# End File texi2html.init +###################################################################### + + +require "$ENV{T2H_HOME}/texi2html.init" + if ($0 =~ /\.pl$/ && + -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init"); + +#+++############################################################################ +# # +# Initialization # +# Pasted content of File $(srcdir)/MySimple.pm: Command-line processing # +# # +#---############################################################################ + +# leave this within comments, and keep the require statement +# This way, you can directly run texi2html.pl, if $ENV{T2H_HOME}/texi2html.init +# exists. + +# +package Getopt::MySimple; + +# Name: +# Getopt::MySimple. +# +# Documentation: +# POD-style (incomplete) documentation is in file MySimple.pod +# +# Tabs: +# 4 spaces || die. +# +# Author: +# Ron Savage rpsavage@ozemail.com.au. +# 1.00 19-Aug-97 Initial version. +# 1.10 13-Oct-97 Add arrays of switches (eg '=s@'). +# 1.20 3-Dec-97 Add 'Help' on a per-switch basis. +# 1.30 11-Dec-97 Change 'Help' to 'verbose'. Make all hash keys lowercase. +# 1.40 10-Nov-98 Change width of help report. Restructure tests. +# 1-Jul-00 Modifications for Texi2html + +# -------------------------------------------------------------------------- +# Locally modified by obachman (Display type instead of env, order by cmp) +# $Id: MySimple.pm,v 1.1 2000/07/03 08:44:13 obachman Exp $ + +# use strict; +# no strict 'refs'; + +use vars qw(@EXPORT @EXPORT_OK @ISA); +use vars qw($fieldWidth $opt $VERSION); + +use Exporter(); +use Getopt::Long; + +@ISA = qw(Exporter); +@EXPORT = qw(); +@EXPORT_OK = qw($opt); # An alias for $self -> {'opt'}. + +# -------------------------------------------------------------------------- + +$fieldWidth = 20; +$VERSION = '1.41'; + +# -------------------------------------------------------------------------- + +sub byOrder +{ + my($self) = @_; + + return uc($a) cmp (uc($b)); +} + +# -------------------------------------------------------------------------- + +sub dumpOptions +{ + my($self) = @_; + + print 'Option', ' ' x ($fieldWidth - length('Option') ), "Value\n"; + + for (sort byOrder keys(%{$self -> {'opt'} }) ) + { + print "-$_", ' ' x ($fieldWidth - (1 + length) ), "${$self->{'opt'} }{$_}\n"; + } + + print "\n"; + +} # End of dumpOptions. + +# -------------------------------------------------------------------------- +# Return: +# 0 -> Error. +# 1 -> Ok. + +sub getOptions +{ + push(@_, 0) if ($#_ == 2); # Default for $ignoreCase is 0. + push(@_, 1) if ($#_ == 3); # Default for $helpThenExit is 1. + + my($self, $default, $helpText, $versionText, + $helpThenExit, $versionThenExit, $ignoreCase) = @_; + + $helpThenExit = 1 unless (defined($helpThenExit)); + $versionThenExit = 1 unless (defined($versionThenExit)); + $ignoreCase = 0 unless (defined($ignoreCase)); + + $self -> {'default'} = $default; + $self -> {'helpText'} = $helpText; + $self -> {'versionText'} = $versionText; + $Getopt::Long::ignorecase = $ignoreCase; + + unless (defined($self -> {'default'}{'help'})) + { + $self -> {'default'}{'help'} = + { + type => ':i', + default => '', + linkage => sub {$self->helpOptions($_[1]); exit (0) if $helpThenExit;}, + verbose => "print help and exit" + }; + } + + unless (defined($self -> {'default'}{'version'})) + { + $self -> {'default'}{'version'} = + { + type => '', + default => '', + linkage => sub {print $self->{'versionText'}; exit (0) if versionTheExit;}, + verbose => "print version and exit" + }; + } + + for (keys(%{$self -> {'default'} }) ) + { + my $type = ${$self -> {'default'} }{$_}{'type'}; + push(@{$self -> {'type'} }, "$_$type"); + $self->{'opt'}->{$_} = ${$self -> {'default'} }{$_}{'linkage'} + if ${$self -> {'default'} }{$_}{'linkage'}; + } + + my($result) = &GetOptions($self -> {'opt'}, @{$self -> {'type'} }); + + return $result unless $result; + + for (keys(%{$self -> {'default'} }) ) + { + if (! defined(${$self -> {'opt'} }{$_})) #{ + { + ${$self -> {'opt'} }{$_} = ${$self -> {'default'} }{$_}{'default'}; + } + } + + $result; +} # End of getOptions. + +# -------------------------------------------------------------------------- + +sub helpOptions +{ + my($self) = shift; + my($noHelp) = shift; + $noHelp = 0 unless $noHelp; + my($optwidth, $typewidth, $defaultwidth, $maxlinewidth, $valind, $valwidth) + = (10, 5, 9, 78, 4, 11); + + print "$self->{'helpText'}" if ($self -> {'helpText'}); + + print ' Option', ' ' x ($optwidth - length('Option') -1 ), + 'Type', ' ' x ($typewidth - length('Type') + 1), + 'Default', ' ' x ($defaultwidth - length('Default') ), + "Description\n"; + + for (sort byOrder keys(%{$self -> {'default'} }) ) + { + my($line, $help, $option, $val); + $option = $_; + next if ${$self->{'default'} }{$_}{'noHelp'} && ${$self->{'default'} }{$_}{'noHelp'} > $noHelp; + $line = " -$_ " . ' ' x ($optwidth - (2 + length) ) . + "${$self->{'default'} }{$_}{'type'} ". + ' ' x ($typewidth - (1+length(${$self -> {'default'} }{$_}{'type'}) )); + + $val = ${$self->{'default'} }{$_}{'linkage'}; + if ($val) + { + if (ref($val) eq 'SCALAR') + { + $val = $$val; + } + else + { + $val = ''; + } + } + else + { + $val = ${$self->{'default'} }{$_}{'default'}; + } + $line .= "$val "; + $line .= ' ' x ($optwidth + $typewidth + $defaultwidth + 1 - length($line)); + + if (defined(${$self -> {'default'} }{$_}{'verbose'}) && + ${$self -> {'default'} }{$_}{'verbose'} ne '') + { + $help = "${$self->{'default'} }{$_}{'verbose'}"; + } + else + { + $help = ' '; + } + if ((length("$line") + length($help)) < $maxlinewidth) + { + print $line , $help, "\n"; + } + else + { + print $line, "\n", ' ' x $valind, $help, "\n"; + } + for $val (sort byOrder keys(%{${$self->{'default'}}{$option}{'values'}})) + { + print ' ' x ($valind + 2); + print $val, ' ', ' ' x ($valwidth - length($val) - 2); + print ${$self->{'default'}}{$option}{'values'}{$val}, "\n"; + } + } + + print <| ! no argument: variable is set to 1 on -foo (or, to 0 on -nofoo) + =s | :s mandatory (or, optional) string argument + =i | :i mandatory (or, optional) integer argument +EOT +} # End of helpOptions. + +#------------------------------------------------------------------- + +sub new +{ + my($class) = @_; + my($self) = {}; + $self -> {'default'} = {}; + $self -> {'helpText'} = ''; + $self -> {'opt'} = {}; + $opt = $self -> {'opt'}; # An alias for $self -> {'opt'}. + $self -> {'type'} = (); + + return bless $self, $class; + +} # End of new. + +# -------------------------------------------------------------------------- + +1; + +# End MySimple.pm + +require "$ENV{T2H_HOME}/MySimple.pm" + if ($0 =~ /\.pl$/ && + -e "$ENV{T2H_HOME}/texi2html.init" && -r "$ENV{T2H_HOME}/texi2html.init"); + +package main; + +#+++############################################################################ +# # +# Constants # +# # +#---############################################################################ + +$DEBUG_TOC = 1; +$DEBUG_INDEX = 2; +$DEBUG_BIB = 4; +$DEBUG_GLOSS = 8; +$DEBUG_DEF = 16; +$DEBUG_HTML = 32; +$DEBUG_USER = 64; +$DEBUG_L2H = 128; + + +$BIBRE = '\[[\w\/-]+\]'; # RE for a bibliography reference +$FILERE = '[\/\w.+-]+'; # RE for a file name +$VARRE = '[^\s\{\}]+'; # RE for a variable name +$NODERE = '[^,:]+'; # RE for a node name +$NODESRE = '[^:]+'; # RE for a list of node names + +$ERROR = "***"; # prefix for errors +$WARN = "**"; # prefix for warnings + + # program home page +$PROTECTTAG = "_ThisIsProtected_"; # tag to recognize protected sections + +$CHAPTEREND = "\n"; # to know where a chpater ends +$SECTIONEND = "\n"; # to know where section ends +$TOPEND = "\n"; # to know where top ends + + + +# +# pre-defined indices +# +$index_properties = +{ + 'c' => { name => 'cp'}, + 'f' => { name => 'fn', code => 1}, + 'v' => { name => 'vr', code => 1}, + 'k' => { name => 'ky', code => 1}, + 'p' => { name => 'pg', code => 1}, + 't' => { name => 'tp', code => 1} +}; + + +%predefined_index = ( + 'cp', 'c', + 'fn', 'f', + 'vr', 'v', + 'ky', 'k', + 'pg', 'p', + 'tp', 't', + ); + +# +# valid indices +# +%valid_index = ( + 'c', 1, + 'f', 1, + 'v', 1, + 'k', 1, + 'p', 1, + 't', 1, + ); + +# +# texinfo section names to level +# +%sec2level = ( + 'top', 0, + 'chapter', 1, + 'unnumbered', 1, + 'majorheading', 1, + 'chapheading', 1, + 'appendix', 1, + 'section', 2, + 'unnumberedsec', 2, + 'heading', 2, + 'appendixsec', 2, + 'appendixsection', 2, + 'subsection', 3, + 'unnumberedsubsec', 3, + 'subheading', 3, + 'appendixsubsec', 3, + 'subsubsection', 4, + 'unnumberedsubsubsec', 4, + 'subsubheading', 4, + 'appendixsubsubsec', 4, + ); + +# +# accent map, TeX command to ISO name +# +%accent_map = ( + '"', 'uml', + '~', 'tilde', + '^', 'circ', + '`', 'grave', + '\'', 'acute', + ); + +# +# texinfo "simple things" (@foo) to HTML ones +# +%simple_map = ( + # cf. makeinfo.c + "*", "
    ", # HTML+ + " ", " ", + "\t", " ", + "-", "­", # soft hyphen + "\n", "\n", + "|", "", + 'tab', '<\/TD>
    Button Name Go to From 1.2.3 go to
    +EOT + $about .= + ($T2H_ICONS && $T2H_ACTIVE_ICONS{$button} ? + &$T2H_button_icon_img($button, $T2H_ACTIVE_ICONS{$button}) : + " [" . $T2H_NAVIGATION_TEXT{$button} . "] "); + $about .= < + +$button + +$T2H_BUTTONS_GOTO{$button} + +$T2H_BUTTONS_EXAMPLE{$button} +
    ', + # spacing commands + ":", "", + "!", "!", + "?", "?", + ".", ".", + "-", "", + ); + +# +# texinfo "things" (@foo{}) to HTML ones +# +%things_map = ( + 'TeX', 'TeX', + 'br', '

    ', # paragraph break + 'bullet', '*', + 'copyright', '(C)', + 'dots', '...<\/small>', + 'enddots', '....<\/small>', + 'equiv', '==', + 'error', 'error-->', + 'expansion', '==>', + 'minus', '-', + 'point', '-!-', + 'print', '-|', + 'result', '=>', + 'today', $T2H_TODAY, + 'aa', 'å', + 'AA', 'Å', + 'ae', 'æ', + 'oe', 'œ', + 'AE', 'Æ', + 'OE', 'Œ', + 'o', 'ø', + 'O', 'Ø', + 'ss', 'ß', + 'l', '\/l', + 'L', '\/L', + 'exclamdown', '¡', + 'questiondown', '¿', + 'pounds', '£' + ); + +# +# texinfo styles (@foo{bar}) to HTML ones +# +%style_map = ( + 'acronym', '&do_acronym', + 'asis', '', + 'b', 'B', + 'cite', 'CITE', + 'code', 'CODE', + 'command', 'CODE', + 'ctrl', '&do_ctrl', # special case + 'dfn', 'EM', # DFN tag is illegal in the standard + 'dmn', '', # useless + 'email', '&do_email', # insert a clickable email address + 'emph', 'EM', + 'env', 'CODE', + 'file', '"TT', # will put quotes, cf. &apply_style + 'i', 'I', + 'kbd', 'KBD', + 'key', 'KBD', + 'math', '&do_math', + 'option', '"SAMP', # will put quotes, cf. &apply_style + 'r', '', # unsupported + 'samp', '"SAMP', # will put quotes, cf. &apply_style + 'sc', '&do_sc', # special case + 'strong', 'STRONG', + 't', 'TT', + 'titlefont', '', # useless + 'uref', '&do_uref', # insert a clickable URL + 'url', '&do_url', # insert a clickable URL + 'var', 'VAR', + 'w', '', # unsupported + 'H', '&do_accent', + 'dotaccent', '&do_accent', + 'ringaccent','&do_accent', + 'tieaccent', '&do_accent', + 'u','&do_accent', + 'ubaraccent','&do_accent', + 'udotaccent','&do_accent', + 'v', '&do_accent', + ',', '&do_accent', + 'dotless', '&do_accent' + ); + +# +# texinfo format (@foo/@end foo) to HTML ones +# +%format_map = ( + 'quotation', 'BLOCKQUOTE', + # lists + 'itemize', 'UL', + 'enumerate', 'OL', + # poorly supported + 'flushleft', 'PRE', + 'flushright', 'PRE', + ); + +# +# an eval of these $complex_format_map->{what}->[0] yields beginning +# an eval of these $complex_format_map->{what}->[1] yieleds end +$complex_format_map = +{ + example => + [ + q{"$T2H_EXAMPLE_INDENT_CELL
    "},
+  q{'
    '} + ], + smallexample => + [ + q{"$T2H_SMALL_EXAMPLE_INDENT_CELL
    "},
+  q{'
    '} + ], + display => + [ + q{"$T2H_EXAMPLE_INDENT_CELL
    '},
+  q{'
    '} + ], + smalldisplay => + [ + q{"$T2H_SMALL_EXAMPLE_INDENT_CELL
    '},
+  q{'
    '} + ] +}; + +$complex_format_map->{lisp} = $complex_format_map->{example}; +$complex_format_map->{smalllisp} = $complex_format_map->{smallexample}; +$complex_format_map->{format} = $complex_format_map->{display}; +$complex_format_map->{smallformat} = $complex_format_map->{smalldisplay}; + +# +# texinfo definition shortcuts to real ones +# +%def_map = ( + # basic commands + 'deffn', 0, + 'defvr', 0, + 'deftypefn', 0, + 'deftypevr', 0, + 'defcv', 0, + 'defop', 0, + 'deftp', 0, + # basic x commands + 'deffnx', 0, + 'defvrx', 0, + 'deftypefnx', 0, + 'deftypevrx', 0, + 'defcvx', 0, + 'defopx', 0, + 'deftpx', 0, + # shortcuts + 'defun', 'deffn Function', + 'defmac', 'deffn Macro', + 'defspec', 'deffn {Special Form}', + 'defvar', 'defvr Variable', + 'defopt', 'defvr {User Option}', + 'deftypefun', 'deftypefn Function', + 'deftypevar', 'deftypevr Variable', + 'defivar', 'defcv {Instance Variable}', + 'deftypeivar', 'defcv {Instance Variable}', # NEW: FIXME + 'defmethod', 'defop Method', + 'deftypemethod', 'defop Method', # NEW:FIXME + # x shortcuts + 'defunx', 'deffnx Function', + 'defmacx', 'deffnx Macro', + 'defspecx', 'deffnx {Special Form}', + 'defvarx', 'defvrx Variable', + 'defoptx', 'defvrx {User Option}', + 'deftypefunx', 'deftypefnx Function', + 'deftypevarx', 'deftypevrx Variable', + 'defivarx', 'defcvx {Instance Variable}', + 'defmethodx', 'defopx Method', + ); + +# +# things to skip +# +%to_skip = ( + # comments + 'c', 1, + 'comment', 1, + 'ifnotinfo', 1, + 'ifnottex', 1, + 'ifhtml', 1, + 'end ifhtml', 1, + 'end ifnotinfo', 1, + 'end ifnottex', 1, + # useless + 'detailmenu', 1, + 'direntry', 1, + 'contents', 1, + 'shortcontents', 1, + 'summarycontents', 1, + 'footnotestyle', 1, + 'end ifclear', 1, + 'end ifset', 1, + 'titlepage', 1, + 'end titlepage', 1, + # unsupported commands (formatting) + 'afourpaper', 1, + 'cropmarks', 1, + 'finalout', 1, + 'headings', 1, + 'sp', 1, + 'need', 1, + 'page', 1, + 'setchapternewpage', 1, + 'everyheading', 1, + 'everyfooting', 1, + 'evenheading', 1, + 'evenfooting', 1, + 'oddheading', 1, + 'oddfooting', 1, + 'smallbook', 1, + 'vskip', 1, + 'filbreak', 1, + 'paragraphindent', 1, + # unsupported formats + 'cartouche', 1, + 'end cartouche', 1, + 'group', 1, + 'end group', 1, + ); + +#+++############################################################################ +# # +# Argument parsing, initialisation # +# # +#---############################################################################ + +# +# flush stdout and stderr after every write +# +select(STDERR); +$| = 1; +select(STDOUT); +$| = 1; + + +%value = (); # hold texinfo variables, see also -D +$use_bibliography = 1; +$use_acc = 1; + +# +# called on -init-file +sub LoadInitFile +{ + my $init_file = shift; + # second argument is value of options + $init_file = shift; + if (-f $init_file) + { + print "# reading initialization file from $init_file\n" + if ($T2H_VERBOSE); + require($init_file); + } + else + { + print "$ERROR Error: can't read init file $int_file\n"; + $init_file = ''; + } +} + +# +# called on -lang +sub SetDocumentLanguage +{ + my $lang = shift; + if (! exists($T2H_WORDS->{$lang})) + { + warn "$ERROR: Language specs for '$lang' do not exists. Reverting to '" . + ($T2H_LANG ? T2H_LANG : "en") . "'\n"; + } + else + { + print "# using '$lang' as document language\n" if ($T2H_VERBOSE); + $T2H_LANG = $lang; + } +} + +## +## obsolete cmd line options +## +$T2H_OBSOLETE_OPTIONS -> {'no-section_navigation'} = +{ + type => '!', + linkage => sub {$main::T2H_SECTION_NAVIGATION = 0;}, + verbose => 'obsolete, use -nosec_nav', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {use_acc} = +{ + type => '!', + linkage => \$use_acc, + verbose => 'obsolete', + noHelp => 2 +}; +$T2H_OBSOLETE_OPTIONS -> {expandinfo} = +{ + type => '!', + linkage => sub {$main::T2H_EXPAND = 'info';}, + verbose => 'obsolete, use "-expand info" instead', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {expandtex} = +{ + type => '!', + linkage => sub {$main::T2H_EXPAND = 'tex';}, + verbose => 'obsolete, use "-expand tex" instead', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {monolithic} = +{ + type => '!', + linkage => sub {$main::T2H_SPLIT = '';}, + verbose => 'obsolete, use "-split no" instead', + noHelp => 2 +}; +$T2H_OBSOLETE_OPTIONS -> {split_node} = +{ + type => '!', + linkage => sub{$main::T2H_SPLIT = 'section';}, + verbose => 'obsolete, use "-split section" instead', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {split_chapter} = +{ + type => '!', + linkage => sub{$main::T2H_SPLIT = 'chapter';}, + verbose => 'obsolete, use "-split chapter" instead', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {no_verbose} = +{ + type => '!', + linkage => sub {$main::T2H_VERBOSE = 0;}, + verbose => 'obsolete, use -noverbose instead', + noHelp => 2, +}; +$T2H_OBSOLETE_OPTIONS -> {output_file} = +{ + type => '=s', + linkage => sub {$main::T2H_OUT = @_[1]; $T2H_SPLIT = '';}, + verbose => 'obsolete, use -out_file instead', + noHelp => 2 +}; + +$T2H_OBSOLETE_OPTIONS -> {section_navigation} = +{ + type => '!', + linkage => \$T2H_SECTION_NAVIGATION, + verbose => 'obsolete, use -sec_nav instead', + noHelp => 2, +}; + +$T2H_OBSOLETE_OPTIONS -> {verbose} = +{ + type => '!', + linkage => \$T2H_VERBOSE, + verbose => 'obsolete, use -Verbose instead', + noHelp => 2 +}; + +# read initialzation from $sysconfdir/texi2htmlrc or $HOME/.texi2htmlrc +my $home = $ENV{HOME}; +defined($home) or $home = ''; +foreach $i ('/usr/local/etc/texi2htmlrc', "$home/.texi2htmlrc") { + if (-f $i) { + print "# reading initialization file from $i\n" + if ($T2H_VERBOSE); + require($i); + } +} + + +#+++############################################################################ +# # +# parse command-line options +# # +#---############################################################################ +$T2H_USAGE_TEXT = <getOptions($T2H_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n")) +{ + print $Configure_failed if $Configure_failed; + die $T2H_FAILURE_TEXT; +} + +if (@ARGV > 1) +{ + eval {Getopt::Long::Configure("no_pass_through");}; + if (! $options->getOptions($T2H_OBSOLETE_OPTIONS, $T2H_USAGE_TEXT, "$THISVERSION\n")) + { + print $Configure_failed if $Configure_failed; + die $T2H_FAILURE_TEXT; + } +} + +if ($T2H_CHECK) { + die "Need file to check\n$T2H_FAILURE_TEXT" unless @ARGV > 0; + ✓ + exit; +} + +#+++############################################################################ +# # +# evaluation of cmd line options +# # +#---############################################################################ + +if ($T2H_EXPAND eq 'info') +{ + $to_skip{'ifinfo'} = 1; + $to_skip{'end ifinfo'} = 1; +} +elsif ($T2H_EXPAND eq 'tex') +{ + $to_skip{'iftex'} = 1; + $to_skip{'end iftex'} = 1; + +} + +$T2H_INVISIBLE_MARK = '' if $T2H_INVISIBLE_MARK eq 'xbm'; + +# +# file name buisness +# +die "Need exactly one file to translate\n$T2H_FAILURE_TEXT" unless @ARGV == 1; +$docu = shift(@ARGV); +if ($docu =~ /.*\//) { + chop($docu_dir = $&); + $docu_name = $'; +} else { + $docu_dir = '.'; + $docu_name = $docu; +} +unshift(@T2H_INCLUDE_DIRS, $docu_dir); +$docu_name =~ s/\.te?x(i|info)?$//; # basename of the document +$docu_name = $T2H_PREFIX if ($T2H_PREFIX); + +# subdir +if ($T2H_SUBDIR && ! $T2H_OUT) +{ + $T2H_SUBDIR =~ s|/*$||; + unless (-d "$T2H_SUBDIR" && -w "$T2H_SUBDIR") + { + if ( mkdir($T2H_SUBDIR, oct(755))) + { + print "# created directory $T2H_SUBDIR\n" if ($T2H_VERBOSE); + } + else + { + warn "$ERROR can't create directory $T2H_SUBDIR. Put results into current directory\n"; + $T2H_SUBDIR = ''; + } + } +} + +if ($T2H_SUBDIR && ! $T2H_OUT) +{ + $docu_rdir = "$T2H_SUBDIR/"; + print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE); +} +else +{ + if ($T2H_OUT && $T2H_OUT =~ m|(.*)/|) + { + $docu_rdir = "$1/"; + print "# putting result files into directory $docu_rdir\n" if ($T2H_VERBOSE); + } + else + { + print "# putting result files into current directory \n" if ($T2H_VERBOSE); + $docu_rdir = ''; + } +} + +# extension +if ($T2H_SHORTEXTN) +{ + $docu_ext = "htm"; +} +else +{ + $docu_ext = "html"; +} +if ($T2H_TOP_FILE =~ /\..*$/) +{ + $T2H_TOP_FILE = $`.".$docu_ext"; +} + +# result files +if (! $T2H_OUT && ($T2H_SPLIT =~ /section/i || $T2H_SPLIT =~ /node/i)) +{ + $T2H_SPLIT = 'section'; +} +elsif (! $T2H_OUT && $T2H_SPLIT =~ /chapter/i) +{ + $T2H_SPLIT = 'chapter' +} +else +{ + undef $T2H_SPLIT; +} + +$docu_doc = "$docu_name.$docu_ext"; # document's contents +$docu_doc_file = "$docu_rdir$docu_doc"; +if ($T2H_SPLIT) +{ + $docu_toc = $T2H_TOC_FILE || "${docu_name}_toc.$docu_ext"; # document's table of contents + $docu_stoc = "${docu_name}_ovr.$docu_ext"; # document's short toc + $docu_foot = "${docu_name}_fot.$docu_ext"; # document's footnotes + $docu_about = "${docu_name}_abt.$docu_ext"; # about this document + $docu_top = $T2H_TOP_FILE || $docu_doc; +} +else +{ + if ($T2H_OUT) + { + $docu_doc = $T2H_OUT; + $docu_doc =~ s|.*/||; + } + $docu_toc = $docu_foot = $docu_stoc = $docu_about = $docu_top = $docu_doc; +} + +$docu_toc_file = "$docu_rdir$docu_toc"; +$docu_stoc_file = "$docu_rdir$docu_stoc"; +$docu_foot_file = "$docu_rdir$docu_foot"; +$docu_about_file = "$docu_rdir$docu_about"; +$docu_top_file = "$docu_rdir$docu_top"; + +$docu_frame_file = "$docu_rdir${docu_name}_frame.$docu_ext"; +$docu_toc_frame_file = "$docu_rdir${docu_name}_toc_frame.$docu_ext"; + +# +# variables +# +$value{'html'} = 1; # predefine html (the output format) +$value{'texi2html'} = $THISVERSION; # predefine texi2html (the translator) +# _foo: internal to track @foo +foreach ('_author', '_title', '_subtitle', + '_settitle', '_setfilename', '_shorttitle') { + $value{$_} = ''; # prevent -w warnings +} +%node2sec = (); # node to section name +%sec2node = (); # section to node name +%sec2number = (); # section to number +%number2sec = (); # number to section +%idx2node = (); # index keys to node +%node2href = (); # node to HREF +%node2next = (); # node to next +%node2prev = (); # node to prev +%node2up = (); # node to up +%bib2href = (); # bibliography reference to HREF +%gloss2href = (); # glossary term to HREF +@sections = (); # list of sections +%tag2pro = (); # protected sections + +# +# initial indexes +# +$bib_num = 0; +$foot_num = 0; +$gloss_num = 0; +$idx_num = 0; +$sec_num = 0; +$doc_num = 0; +$html_num = 0; + +# +# can I use ISO8879 characters? (HTML+) +# +if ($T2H_USE_ISO) { + $things_map{'bullet'} = "•"; + $things_map{'copyright'} = "©"; + $things_map{'dots'} = "…"; + $things_map{'equiv'} = "≡"; + $things_map{'expansion'} = "→"; + $things_map{'point'} = "∗"; + $things_map{'result'} = "⇒"; +} + +# +# read texi2html extensions (if any) +# +$extensions = 'texi2html.ext'; # extensions in working directory +if (-f $extensions) { + print "# reading extensions from $extensions\n" if $T2H_VERBOSE; + require($extensions); +} +($progdir = $0) =~ s/[^\/]+$//; +if ($progdir && ($progdir ne './')) { + $extensions = "${progdir}texi2html.ext"; # extensions in texi2html directory + if (-f $extensions) { + print "# reading extensions from $extensions\n" if $T2H_VERBOSE; + require($extensions); + } +} + + +print "# reading from $docu\n" if $T2H_VERBOSE; + +######################################################################### +# +# latex2html stuff +# +# latex2html conversions consist of three stages: +# 1) ToLatex: Put "latex" code into a latex file +# 2) ToHtml: Use latex2html to generate corresponding html code and images +# 3) FromHtml: Extract generated code and images from latex2html run +# + +########################## +# default settings +# + +# defaults for files and names + +sub l2h_Init +{ + local($root) = @_; + + return 0 unless ($root); + + $l2h_name = "${root}_l2h"; + + $l2h_latex_file = "$docu_rdir${l2h_name}.tex"; + $l2h_cache_file = "${docu_rdir}l2h_cache.pm"; + $T2H_L2H_L2H = "latex2html" unless ($T2H_L2H_L2H); + + # destination dir -- generated images are put there, should be the same + # as dir of enclosing html document -- + $l2h_html_file = "$docu_rdir${l2h_name}.html"; + $l2h_prefix = "${l2h_name}_"; + return 1; +} + + +########################## +# +# First stage: Generation of Latex file +# Initialize with: l2h_InitToLatex +# Add content with: l2h_ToLatex($text) --> HTML placeholder comment +# Finish with: l2h_FinishToLatex +# + +$l2h_latex_preample = <$l2h_latex_file")) + { + warn "$ERROR Error l2h: Can't open latex file '$latex_file' for writing\n"; + return 0; + } + print "# l2h: use ${l2h_latex_file} as latex file\n" if ($T2H_VERBOSE); + print L2H_LATEX $l2h_latex_preample; + } + # open database for caching + l2h_InitCache(); + $l2h_latex_count = 0; + $l2h_to_latex_count = 0; + $l2h_cached_count = 0; + return 1; +} + +# print text (1st arg) into latex file (if not already there), return +# HTML commentary which can be later on replaced by the latex2html +# generated text +sub l2h_ToLatex +{ + my($text) = @_; + my($count); + + $l2h_to_latex_count++; + $text =~ s/(\s*)$//; + + # try whether we can cache it + my $cached_text = l2h_FromCache($text); + if ($cached_text) + { + $l2h_cached_count++; + return $cached_text; + } + + # try whether we have text already on things to do + unless ($count = $l2h_to_latex{$text}) + { + $count = $l2h_latex_count; + $l2h_latex_count++; + $l2h_to_latex{$text} = $count; + $l2h_to_latex[$count] = $text; + unless ($T2H_L2H_SKIP) + { + print L2H_LATEX "\\begin{rawhtml}\n"; + print L2H_LATEX "\n"; + print L2H_LATEX "\\end{rawhtml}\n"; + + print L2H_LATEX "$text\n"; + + print L2H_LATEX "\\begin{rawhtml}\n"; + print L2H_LATEX "\n"; + print L2H_LATEX "\\end{rawhtml}\n"; + } + } + return ""; +} + +# print closing into latex file and close it +sub l2h_FinishToLatex +{ + local ($reused); + + $reused = $l2h_to_latex_count - $l2h_latex_count - $l2h_cached_count; + unless ($T2H_L2H_SKIP) + { + print L2H_LATEX $l2h_latex_closing; + close(L2H_LATEX); + } + print "# l2h: finished to latex ($l2h_cached_count cached, $reused reused, $l2h_latex_count contents)\n" if ($T2H_VERBOSE); + unless ($l2h_latex_count) + { + l2h_Finish(); + return 0; + } + return 1; +} + +################################### +# Second stage: Use latex2html to generate corresponding html code and images +# +# l2h_ToHtml([$l2h_latex_file, [$l2h_html_dir]]): +# Call latex2html on $l2h_latex_file +# Put images (prefixed with $l2h_name."_") and html file(s) in $l2h_html_dir +# Return 1, on success +# 0, otherwise +# +sub l2h_ToHtml +{ + local($call, $ext, $root, $dotbug); + + if ($T2H_L2H_SKIP) + { + print "# l2h: skipping latex2html run\n" if ($T2H_VERBOSE); + return 1; + } + + # Check for dot in directory where dvips will work + if ($T2H_L2H_TMP) + { + if ($T2H_L2H_TMP =~ /\./) + { + warn "$ERROR Warning l2h: l2h_tmp dir contains a dot. Use /tmp, instead\n"; + $dotbug = 1; + } + } + else + { + if (&getcwd =~ /\./) + { + warn "$ERROR Warning l2h: current dir contains a dot. Use /tmp as l2h_tmp dir \n"; + $dotbug = 1; + } + } + # fix it, if necessary and hope that it works + $T2H_L2H_TMP = "/tmp" if ($dotbug); + + $call = $T2H_L2H_L2H; + # use init file, if specified + $call = $call . " -init_file " . $init_file if ($init_file && -f $init_file); + # set output dir + $call .= ($docu_rdir ? " -dir $docu_rdir" : " -no_subdir"); + # use l2h_tmp, if specified + $call = $call . " -tmp $T2H_L2H_TMP" if ($T2H_L2H_TMP); + # options we want to be sure of + $call = $call ." -address 0 -info 0 -split 0 -no_navigation -no_auto_link"; + $call = $call ." -prefix ${l2h_prefix} $l2h_latex_file"; + + print "# l2h: executing '$call'\n" if ($T2H_VERBOSE); + if (system($call)) + { + warn "l2h ***Error: '${call}' did not succeed\n"; + return 0; + } + else + { + print "# l2h: latex2html finished successfully\n" if ($T2H_VERBOSE); + return 1; + } +} + +# this is directly pasted over from latex2html +sub getcwd { + local($_) = `pwd`; + + die "'pwd' failed (out of memory?)\n" + unless length; + chop; + $_; +} + + +########################## +# Third stage: Extract generated contents from latex2html run +# Initialize with: l2h_InitFromHtml +# open $l2h_html_file for reading +# reads in contents into array indexed by numbers +# return 1, on success -- 0, otherwise +# Extract Html code with: l2h_FromHtml($text) +# replaces in $text all previosuly inserted comments by generated html code +# returns (possibly changed) $text +# Finish with: l2h_FinishFromHtml +# closes $l2h_html_dir/$l2h_name.".$docu_ext" + +sub l2h_InitFromHtml +{ + local($h_line, $h_content, $count, %l2h_img); + + if (! open(L2H_HTML, "<${l2h_html_file}")) + { + print "$ERROR Error l2h: Can't open ${l2h_html_file} for reading\n"; + return 0; + } + print "# l2h: use ${l2h_html_file} as html file\n" if ($T2H_VERBOSE); + + $l2h_html_count = 0; + + while ($h_line = ) + { + if ($h_line =~ /^/) + { + $count = $1; + $h_content = ""; + while ($h_line = ) + { + if ($h_line =~ /^/) + { + chomp $h_content; + chomp $h_content; + $l2h_html_count++; + $h_content = l2h_ToCache($count, $h_content); + $l2h_from_html[$count] = $h_content; + $h_content = ''; + last; + } + $h_content = $h_content.$h_line; + } + if ($hcontent) + { + print "$ERROR Warning l2h: l2h_end $l2h_name $count not found\n" + if ($T2H_VERBOSE); + close(L2H_HTML); + return 0; + } + } + } + print "# l2h: Got $l2h_html_count of $l2h_latex_count html contents\n" + if ($T2H_VERBOSE); + + close(L2H_HTML); + return 1; +} + +sub l2h_FromHtml +{ + local($text) = @_; + local($done, $to_do, $count); + + $to_do = $text; + + while ($to_do =~ /([^\000]*)([^\000]*)/) + { + $to_do = $1; + $count = $2; + $done = $3.$done; + + $done = "".$done + if ($T2H_DEBUG & $DEBUG_L2H); + + $done = &l2h_ExtractFromHtml($count) . $done; + + $done = "".$done + if ($T2H_DEBUG & $DEBUG_L2H); + } + return $to_do.$done; +} + + +sub l2h_ExtractFromHtml +{ + local($count) = @_; + + return $l2h_from_html[$count] if ($l2h_from_html[$count]); + + if ($count >= 0 && $count < $l2h_latex_count) + { + # now we are in trouble + local($l_l2h, $_); + + $l2h_extract_error++; + print "$ERROR l2h: can't extract content $count from html\n" + if ($T2H_VERBOSE); + # try simple (ordinary) substition (without l2h) + $l_l2h = $T2H_L2H; + $T2H_L2H = 0; + $_ = $l2h_to_latex{$count}; + $_ = &substitute_style($_); + &unprotect_texi; + $_ = "" . $_ + if ($T2H_DEBUG & $DEBUG_L2H); + $T2H_L2H = $l_l2h; + return $_; + } + else + { + # now we have been incorrectly called + $l2h_range_error++; + print "$ERROR l2h: Request of $count content which is out of valide range [0,$l2h_latex_count)\n"; + return "" + if ($T2H_DEBUG & $DEBUG_L2H); + return ""; + } +} + +sub l2h_FinishFromHtml +{ + if ($T2H_VERBOSE) + { + if ($l2h_extract_error + $l2h_range_error) + { + print "# l2h: finished from html ($l2h_extract_error extract and $l2h_range_error errors)\n"; + } + else + { + print "# l2h: finished from html (no errors)\n"; + } + } +} + +sub l2h_Finish +{ + l2h_StoreCache(); + if ($T2H_L2H_CLEAN) + { + print "# l2h: removing temporary files generated by l2h extension\n" + if $T2H_VERBOSE; + while (<"$docu_rdir$l2h_name"*>) + { + unlink $_; + } + } + print "# l2h: Finished\n" if $T2H_VERBOSE; + return 1; +} + +############################## +# stuff for l2h caching +# + +# I tried doing this with a dbm data base, but it did not store all +# keys/values. Hence, I did as latex2html does it +sub l2h_InitCache +{ + if (-r "$l2h_cache_file") + { + my $rdo = do "$l2h_cache_file"; + warn("$ERROR l2h Error: could not load $docu_rdir$l2h_cache_file: $@\n") + unless ($rdo); + } +} + +sub l2h_StoreCache +{ + return unless $l2h_latex_count; + + my ($key, $value); + open(FH, ">$l2h_cache_file") || return warn"$ERROR l2h Error: could not open $docu_rdir$l2h_cache_file for writing: $!\n"; + + + while (($key, $value) = each %l2h_cache) + { + # escape stuff + $key =~ s|/|\\/|g; + $key =~ s|\\\\/|\\/|g; + # weird, a \ at the end of the key results in an error + # maybe this also broke the dbm database stuff + $key =~ s|\\$|\\\\|; + $value =~ s/\|/\\\|/g; + $value =~ s/\\\\\|/\\\|/g; + $value =~ s|\\\\|\\\\\\\\|g; + print FH "\n\$l2h_cache_key = q/$key/;\n"; + print FH "\$l2h_cache{\$l2h_cache_key} = q|$value|;\n"; + } + print FH "1;"; + close(FH); +} + +# return cached html, if it exists for text, and if all pictures +# are there, as well +sub l2h_FromCache +{ + my $text = shift; + my $cached = $l2h_cache{$text}; + if ($cached) + { + while ($cached =~ m/SRC="(.*?)"/g) + { + unless (-e "$docu_rdir$1") + { + return undef; + } + } + return $cached; + } + return undef; +} + +# insert generated html into cache, move away images, +# return transformed html +$maximage = 1; +sub l2h_ToCache +{ + my $count = shift; + my $content = shift; + my @images = ($content =~ /SRC="(.*?)"/g); + my ($src, $dest); + + for $src (@images) + { + $dest = $l2h_img{$src}; + unless ($dest) + { + my $ext; + if ($src =~ /.*\.(.*)$/ && $1 ne $docu_ext) + { + $ext = $1; + } + else + { + warn "$ERROR: L2h image $src has invalid extension\n"; + next; + } + while (-e "$docu_rdir${docu_name}_$maximage.$ext") { $maximage++;} + $dest = "${docu_name}_$maximage.$ext"; + system("cp -f $docu_rdir$src $docu_rdir$dest"); + $l2h_img{$src} = $dest; + unlink "$docu_rdir$src" unless ($DEBUG & DEBUG_L2H); + } + $content =~ s/$src/$dest/g; + } + $l2h_cache{$l2h_to_latex[$count]} = $content; + return $content; +} + + +#+++############################################################################ +# # +# Pass 1: read source, handle command, variable, simple substitution # +# # +#---############################################################################ + +@lines = (); # whole document +@toc_lines = (); # table of contents +@stoc_lines = (); # table of contents +$curlevel = 0; # current level in TOC +$node = ''; # current node name +$node_next = ''; # current node next name +$node_prev = ''; # current node prev name +$node_up = ''; # current node up name +$in_table = 0; # am I inside a table +$table_type = ''; # type of table ('', 'f', 'v', 'multi') +@tables = (); # nested table support +$in_bibliography = 0; # am I inside a bibliography +$in_glossary = 0; # am I inside a glossary +$in_top = 0; # am I inside the top node +$has_top = 0; # did I see a top node? +$has_top_command = 0; # did I see @top for automatic pointers? +$in_pre = 0; # am I inside a preformatted section +$in_list = 0; # am I inside a list +$in_html = 0; # am I inside an HTML section +$first_line = 1; # is it the first line +$dont_html = 0; # don't protect HTML on this line +$deferred_ref = ''; # deferred reference for indexes +@html_stack = (); # HTML elements stack +$html_element = ''; # current HTML element +&html_reset; +%macros = (); # macros + +# init l2h +$T2H_L2H = &l2h_Init($docu_name) if ($T2H_L2H); +$T2H_L2H = &l2h_InitToLatex if ($T2H_L2H); + +# build code for simple substitutions +# the maps used (%simple_map and %things_map) MUST be aware of this +# watch out for regexps, / and escaped characters! +$subst_code = ''; +foreach (keys(%simple_map)) { + ($re = $_) =~ s/(\W)/\\$1/g; # protect regexp chars + $subst_code .= "s/\\\@$re/$simple_map{$_}/g;\n"; +} +foreach (keys(%things_map)) { + $subst_code .= "s/\\\@$_\\{\\}/$things_map{$_}/g;\n"; +} +if ($use_acc) { + # accentuated characters + foreach (keys(%accent_map)) { + if ($_ eq "`") { + $subst_code .= "s/$;3"; + } elsif ($_ eq "'") { + $subst_code .= "s/$;4"; + } else { + $subst_code .= "s/\\\@\\$_"; + } + $subst_code .= "([a-z])/&\${1}$accent_map{$_};/gi;\n"; + } +} +eval("sub simple_substitutions { $subst_code }"); + +&init_input; +INPUT_LINE: while ($_ = &next_line) { + # + # remove \input on the first lines only + # + if ($first_line) { + next if /^\\input/; + $first_line = 0; + } + # non-@ substitutions cf. texinfmt.el + # + # parse texinfo tags + # + $tag = ''; + $end_tag = ''; + if (/^\s*\@end\s+(\w+)\b/) { + $end_tag = $1; + } elsif (/^\s*\@(\w+)\b/) { + $tag = $1; + } + # + # handle @html / @end html + # + if ($in_html) { + if ($end_tag eq 'html') { + $in_html = 0; + } else { + $tag2pro{$in_html} .= $_; + } + next; + } elsif ($tag eq 'html') { + $in_html = $PROTECTTAG . ++$html_num; + push(@lines, $in_html); + next; + } + + # + # try to remove inlined comments + # syntax from tex-mode.el comment-start-skip + # + s/((^|[^\@])(\@\@)*)\@c(omment | |\{|$).*/$1/; + +# Sometimes I use @c right at the end of a line ( to suppress the line feed ) +# s/((^|[^\@])(\@\@)*)\@c(omment)?$/$1/; +# s/((^|[^\@])(\@\@)*)\@c(omment)? .*/$1/; +# s/(.*)\@c{.*?}(.*)/$1$2/; +# s/(.*)\@comment{.*?}(.*)/$1$2/; +# s/^(.*)\@c /$1/; +# s/^(.*)\@comment /$1/; + + ############################################################# + # value substitution before macro expansion, so that + # it works in macro arguments + s/\@value{($VARRE)}/$value{$1}/eg; + + ############################################################# + # macro substitution + while (/\@(\w+)/g) + { + if (exists($macros->{$1})) + { + my $before = $`; + my $name = $1; + my $after = $'; + my @args; + my $args; + if ($after =~ /^\s*{(.*?[^\\])}(.*)/) + { + $args = $1; + $after = $2; + } + elsif (@{$macros->{$name}->{Args}} == 1) + { + $args = $after; + $args =~ s/^\s*//; + $args =~ s/\s*$//; + $after = ''; + } + $args =~ s|\\\\|\\|g; + $args =~ s|\\{|{|g; + $args =~ s|\\}|}|g; + if (@{$macros->{$name}->{Args}} > 1) + { + $args =~ s/(^|[^\\]),/$1$;/g ; + $args =~ s|\\,|,|g; + @args = split(/$;\s*/, $args) if (@{$macros->{$name}->{Args}} > 1); + } + else + { + $args =~ s|\\,|,|g; + @args = ($args); + } + my $macrobody = $macros->{$name}->{Body}; + for ($i=0; $i<=$#args; $i++) + { + $macrobody =~ s|\\$macros->{$name}->{Args}->[$i]\\|$args[$i]|g; + } + $macrobody =~ s|\\\\|\\|g; + $_ = $before . $macrobody . $after; + unshift @input_spool, map {$_ = $_."\n"} split(/\n/, $_); + next INPUT_LINE; + } + } # + + + # + # try to skip the line + # + if ($end_tag) { + $in_titlepage = 0 if $end_tag eq 'titlepage'; + next if $to_skip{"end $end_tag"}; + } elsif ($tag) { + $in_titlepage = 1 if $tag eq 'titlepage'; + next if $to_skip{$tag}; + last if $tag eq 'bye'; + } + if ($in_top) { + # parsing the top node + if ($tag eq 'node' || + ($sec2level{$tag} && $tag !~ /unnumbered/ && $tag !~ /heading/)) + { + # no more in top + $in_top = 0; + push(@lines, $TOPEND); + } + } + unless ($in_pre) { + s/``/\"/g; + s/''/\"/g; + s/([\w ])---([\w ])/$1--$2/g; + } + # + # analyze the tag + # + if ($tag) { + # skip lines + &skip_until($tag), next if $tag eq 'ignore'; + &skip_until($tag), next if $tag eq 'ifnothtml'; + if ($tag eq 'ifinfo') + { + &skip_until($tag), next unless $T2H_EXPAND eq 'info'; + } + if ($tag eq 'iftex') + { + &skip_until($tag), next unless $T2H_EXPAND eq 'tex'; + } + if ($tag eq 'tex') + { + # add to latex2html file + if ($T2H_EXPAND eq 'tex' && $T2H_L2H && ! $in_pre) + { + # add space to the end -- tex(i2dvi) does this, as well + push(@lines, &l2h_ToLatex(&string_until($tag) . " ")); + } + else + { + &skip_until($tag); + } + next; + } + if ($tag eq 'titlepage') + { + next; + } + # handle special tables + if ($tag =~ /^(|f|v|multi)table$/) { + $table_type = $1; + $tag = 'table'; + } + # special cases + if ($tag eq 'top' || ($tag eq 'node' && /^\@node\s+top\s*,/i)) { + $in_top = 1; + $has_top = 1; + $has_top_command = 1 if $tag eq 'top'; + @lines = (); # ignore all lines before top (title page garbage) + next; + } elsif ($tag eq 'node') { + if ($in_top) + { + $in_top = 0; + push(@lines, $TOPEND); + } + warn "$ERROR Bad node line: $_" unless $_ =~ /^\@node\s$NODESRE$/o; + # request of "Richard Y. Kim" + s/^\@node\s+//; + $_ = &protect_html($_); # if node contains '&' for instance + ($node, $node_next, $node_prev, $node_up) = split(/,/); + &normalise_node($node); + &normalise_node($node_next); + &normalise_node($node_prev); + &normalise_node($node_up); + $node =~ /\"/ ? + push @lines, &html_debug("\n", __LINE__) : + push @lines, &html_debug("\n", __LINE__); + next; + } elsif ($tag eq 'include') { + if (/^\@include\s+($FILERE)\s*$/o) { + $file = LocateIncludeFile($1); + if ($file && -e $file) { + &open($file); + print "# including $file\n" if $T2H_VERBOSE; + } else { + warn "$ERROR Can't find $1, skipping"; + } + } else { + warn "$ERROR Bad include line: $_"; + } + next; + } elsif ($tag eq 'ifclear') { + if (/^\@ifclear\s+($VARRE)\s*$/o) { + next unless defined($value{$1}); + &skip_until($tag); + } else { + warn "$ERROR Bad ifclear line: $_"; + } + next; + } elsif ($tag eq 'ifset') { + if (/^\@ifset\s+($VARRE)\s*$/o) { + next if defined($value{$1}); + &skip_until($tag); + } else { + warn "$ERROR Bad ifset line: $_"; + } + next; + } elsif ($tag eq 'menu') { + unless ($T2H_SHOW_MENU) { + &skip_until($tag); + next; + } + &html_push_if($tag); + push(@lines, &html_debug('', __LINE__)); + } elsif ($format_map{$tag}) { + $in_pre = 1 if $format_map{$tag} eq 'PRE'; + &html_push_if($format_map{$tag}); + push(@lines, &html_debug('', __LINE__)); + $in_list++ if $format_map{$tag} eq 'UL' || $format_map{$tag} eq 'OL' ; +# push(@lines, &debug("

    \n", __LINE__)) +# if $tag =~ /example/i; + # sunshine@sunshineco.com: 
    bla
    looks better than + # 
    \nbla
    (at least on NeXTstep browser + push(@lines, &debug("<$format_map{$tag}>" . + ($in_pre ? '' : "\n"), __LINE__)); + next; + } + elsif (exists $complex_format_map->{$tag}) + { + my $start = eval $complex_format_map->{$tag}->[0]; + if ($@) + { + print "$ERROR: eval of complex_format_map->{$tag}->[0] $complex_format_map->{$tag}->[0]: $@"; + $start = '
    '
+	  }
+	  $in_pre = 1 if $start =~ /
    \n", __LINE__));
+		    &html_push_if('TABLE');
+		} else {
+		    push(@lines, &debug("
    \n", __LINE__));
+		    &html_push_if('DL');
+		}
+		push(@lines, &html_debug('', __LINE__));
+	    } else {
+		warn "$ERROR Bad table line: $_";
+	    }
+	    next;
+	} 
+	elsif ($tag eq 'synindex' || $tag eq 'syncodeindex') 
+	{
+	  if (/^\@$tag\s+(\w+)\s+(\w+)\s*$/) 
+	  {
+	    my $from = $1;
+	    my $to = $2;
+	    my $prefix_from = IndexName2Prefix($from);
+	    my $prefix_to = IndexName2Prefix($to);
+
+	    warn("$ERROR unknown from index name $from ind syn*index line: $_"), next
+	      unless $prefix_from;
+	    warn("$ERROR unknown to index name $to ind syn*index line: $_"), next
+	      unless $prefix_to;
+
+	    if ($tag eq 'syncodeindex')
+	    {
+	      $index_properties->{$prefix_to}->{'from_code'}->{$prefix_from} = 1;
+	    }
+	    else
+	    {
+	       $index_properties->{$prefix_to}->{'from'}->{$prefix_from} = 1;
+	    }
+	  } 
+	  else 
+	  {
+	    warn "$ERROR Bad syn*index line: $_";
+	  }
+	  next;
+	} 
+	elsif ($tag eq 'defindex' || $tag eq 'defcodeindex') 
+	{
+	  if (/^\@$tag\s+(\w+)\s*$/) 
+	  {
+	    my $name = $1;
+	    $index_properties->{$name}->{name} = $name;
+	    $index_properties->{$name}->{code} = 1 if $tag eq 'defcodeindex';
+	  } 
+	  else 
+	  {
+	    warn "$ERROR Bad defindex line: $_";
+	  }
+	  next;
+	}
+	elsif (/^\@printindex/)
+	{
+	  push (@lines, "$_");
+	  next;
+	}
+	elsif ($tag eq 'sp') {
+	    push(@lines, &debug("
    \n", __LINE__));
+	    next;
+	} elsif ($tag eq 'center') {
+	    push(@lines, &debug("
    \n", __LINE__));
+	    s/\@center//;
+	} elsif ($tag eq 'setref') {
+	    &protect_html; # if setref contains '&' for instance
+	    if (/^\@$tag\s*{($NODERE)}\s*$/) {
+		$setref = $1;
+		$setref =~ s/\s+/ /g; # normalize
+		$setref =~ s/ $//;
+		$node2sec{$setref} = $name;
+		$sec2node{$name} = $setref;
+		$node2href{$setref} = "$docu_doc#$docid";
+	    } else {
+		warn "$ERROR Bad setref line: $_";
+	    }
+	    next;
+	} elsif ($tag eq 'lowersections') {
+	    local ($sec, $level);
+	    while (($sec, $level) = each %sec2level) {
+		$sec2level{$sec} = $level + 1;
+	    }
+	    next;
+	} elsif ($tag eq 'raisesections') {
+	    local ($sec, $level);
+	    while (($sec, $level) = each %sec2level) {
+		$sec2level{$sec} = $level - 1;
+	    }
+	    next;
+	}
+	elsif ($tag eq 'macro' || $tag eq 'rmacro')
+	{
+	  if (/^\@$tag\s*(\w+)\s*(.*)/)
+	  {
+	    my $name = $1;
+	    my @args;
+	    @args = split(/\s*,\s*/ , $1)
+	      if ($2 =~ /^\s*{(.*)}\s*/);
+	    
+	    $macros->{$name}->{Args} = \@args;
+	    $macros->{$name}->{Body} = '';
+	    while (($_ = &next_line) && $_ !~ /\@end $tag/)
+	    {
+	      $macros->{$name}->{Body} .= $_;
+	    }
+	    die "ERROR: No closing '\@end $tag' found for macro definition of '$name'\n"
+	      unless (/\@end $tag/);
+	    chomp $macros->{$name}->{Body};
+	  }
+	  else
+	  {
+	    warn "$ERROR: Bad macro defintion $_"
+	  }
+	  next;
+	}
+	elsif ($tag eq 'unmacro')
+	{
+	  delete $macros->{$1} if (/^\@unmacro\s*(\w+)/);
+	  next;
+	}
+	elsif ($tag eq 'documentlanguage')
+	{
+	  SetDocumentLanguage($1) if (!$T2H_LANG && /documentlanguage\s*(\w+)/);
+	}
+	elsif (defined($def_map{$tag})) {
+	    if ($def_map{$tag}) {
+		s/^\@$tag\s+//;
+		$tag = $def_map{$tag};
+		$_ = "\@$tag $_";
+		$tag =~ s/\s.*//;
+	    }
+	} elsif (defined($user_sub{$tag})) {
+	    s/^\@$tag\s+//;
+	    $sub = $user_sub{$tag};
+	    print "# user $tag = $sub, arg: $_" if $T2H_DEBUG & $DEBUG_USER;
+	    if (defined(&$sub)) {
+		chop($_);
+		&$sub($_);
+	    } else {
+		warn "$ERROR Bad user sub for $tag: $sub\n";
+	    }
+	    next;
+	  } 
+	if (defined($def_map{$tag})) {
+	    s/^\@$tag\s+//;
+	    if ($tag =~ /x$/) {
+		# extra definition line
+		$tag = $`;
+		$is_extra = 1;
+	    } else {
+		$is_extra = 0;
+	    }
+	    while (/\{([^\{\}]*)\}/) {
+		# this is a {} construct
+		($before, $contents, $after) = ($`, $1, $');
+		# protect spaces
+		$contents =~ s/\s+/$;9/g;
+		# restore $_ protecting {}
+		$_ = "$before$;7$contents$;8$after";
+	    }
+	    @args = split(/\s+/, &protect_html($_));
+	    foreach (@args) {
+		s/$;9/ /g;	# unprotect spaces
+		s/$;7/\{/g;	# ... {
+		s/$;8/\}/g;	# ... }
+	    }
+	    $type = shift(@args);
+	    $type =~ s/^\{(.*)\}$/$1/;
+	    print "# def ($tag): {$type} ", join(', ', @args), "\n"
+		if $T2H_DEBUG & $DEBUG_DEF;
+	    $type .= ':'; # it's nicer like this
+	    my $name = shift(@args);
+	    $name =~ s/^\{(.*)\}$/$1/;
+	    if ($is_extra) {
+		$_ = &debug("
    ", __LINE__);
+	    } else {
+		$_ = &debug("
    \n
    ", __LINE__);
+	    }
+	    if ($tag eq 'deffn' || $tag eq 'defvr' || $tag eq 'deftp') {
+		$_ .= "$type $name";
+		$_ .= " @args" if @args;
+	    } elsif ($tag eq 'deftypefn' || $tag eq 'deftypevr'
+		     || $tag eq 'defcv' || $tag eq 'defop') {
+		$ftype = $name;
+		$name = shift(@args);
+		$name =~ s/^\{(.*)\}$/$1/;
+		$_ .= "$type $ftype $name";
+		$_ .= " @args" if @args;
+	    } else {
+		warn "$ERROR Unknown definition type: $tag\n";
+		$_ .= "$type $name";
+		$_ .= " @args" if @args;
+	    }
+ 	    $_ .= &debug("\n
    ", __LINE__);
+	    $name = &unprotect_html($name);
+	    if ($tag eq 'deffn' || $tag eq 'deftypefn') {
+	      EnterIndexEntry('f', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@findex $name\n");
+	    } elsif ($tag eq 'defop') {
+	      EnterIndexEntry('f', "$name on $ftype", $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@findex $name on $ftype\n");
+	    } elsif ($tag eq 'defvr' || $tag eq 'deftypevr' || $tag eq 'defcv') {
+	      EnterIndexEntry('v', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@vindex $name\n");
+	    } else {
+	      EnterIndexEntry('t', $name, $docu_doc, $section, \@lines);
+#		unshift(@input_spool, "\@tindex $name\n");
+	    }
+	    $dont_html = 1;
+	}
+    } elsif ($end_tag) {
+	if ($format_map{$end_tag}) {
+	    $in_pre = 0 if $format_map{$end_tag} eq 'PRE';
+	    $in_list-- if $format_map{$end_tag} eq 'UL' || $format_map{$end_tag} eq 'OL' ;
+	    &html_pop_if('P');
+	    &html_pop_if('LI');
+	    &html_pop_if();
+	    push(@lines, &debug("\n", __LINE__));
+	    push(@lines, &html_debug('', __LINE__));
+	}
+	elsif (exists $complex_format_map->{$end_tag})
+	{
+	  my $end = eval $complex_format_map->{$end_tag}->[1];
+	  if ($@)
+	  {
+	    print "$ERROR: eval of complex_format_map->{$end_tag}->[1] $complex_format_map->{$end_tag}->[0]: $@";
+	    $end = '
    '
+	  }
+	  $in_pre = 0 if $end =~ m|
    |; + push(@lines, html_debug($end, __LINE__)); + } elsif ($end_tag =~ /^(|f|v|multi)table$/) { + unless (@tables) { + warn "$ERROR \@end $end_tag without \@*table\n"; + next; + } + &html_pop_if('P'); + ($table_type, $in_table) = split($;, shift(@tables)); + unless ($1 eq $table_type) { + warn "$ERROR \@end $end_tag without matching \@$end_tag\n"; + next; + } + if ($table_type eq "multi") { + push(@lines, "
    \n"); + &html_pop_if('TR'); + } else { + push(@lines, "\n"); + &html_pop_if('DD'); + } + &html_pop_if(); + if (@tables) { + ($table_type, $in_table) = split($;, $tables[0]); + } else { + $in_table = 0; + } + } elsif (defined($def_map{$end_tag})) { + push(@lines, &debug("\n", __LINE__)); + } elsif ($end_tag eq 'menu') { + &html_pop_if(); + push(@lines, $_); # must keep it for pass 2 + } + next; + } + ############################################################# + # anchor insertion + while (/\@anchor\s*\{(.*?)\}/) + { + $_ = $`.$'; + my $anchor = $1; + $anchor = &normalise_node($anchor); + push @lines, &html_debug("\n"); + $node2href{$anchor} = "$docu_doc#$anchor"; + next INPUT_LINE if $_ =~ /^\s*$/; + } + + ############################################################# + # index entry generation, after value substitutions + if (/^\@(\w+?)index\s+/) + { + EnterIndexEntry($1, $', $docu_doc, $section, \@lines); + next; + } + # + # protect texi and HTML things + &protect_texi; + $_ = &protect_html($_) unless $dont_html; + $dont_html = 0; + # substitution (unsupported things) + s/^\@exdent\s+//g; + s/\@noindent\s+//g; + s/\@refill\s+//g; + # other substitutions + &simple_substitutions; + s/\@footnote\{/\@footnote$docu_doc\{/g; # mark footnotes, cf. pass 4 + # + # analyze the tag again + # + if ($tag) { + if (defined($sec2level{$tag}) && $sec2level{$tag} > 0) { + if (/^\@$tag\s+(.+)$/) { + $name = $1; + $name = &normalise_node($name); + $level = $sec2level{$tag}; + # check for index + $first_index_chapter = $node + if ($level == 1 && !$first_index_chapter && + $name =~ /index/i); + if ($in_top && /heading/){ + $T2H_HAS_TOP_HEADING = 1; + $_ = &debug("$name\n", __LINE__); + &html_push_if('body'); + print "# top heading, section $name, level $level\n" + if $T2H_DEBUG & $DEBUG_TOC; + } + else + { + unless (/^\@\w*heading/) + { + unless (/^\@unnumbered/) + { + my $number = &update_sec_num($tag, $level); + $name = $number. ' ' . $name if $T2H_NUMBER_SECTIONS; + $sec2number{$name} = $number; + $number2sec{$number} = $name; + } + if (defined($toplevel)) + { + push @lines, ($level==$toplevel ? $CHAPTEREND : $SECTIONEND); + } + else + { + # first time we see a "section" + unless ($level == 1) + { + warn "$WARN The first section found is not of level 1: $_"; + } + $toplevel = $level; + } + push(@sections, $name); + next_doc() if ($T2H_SPLIT eq 'section' || + $T2H_SPLIT && $level == $toplevel); + } + $sec_num++; + $docid = "SEC$sec_num"; + $tocid = (/^\@\w*heading/ ? undef : "TOC$sec_num"); + # check biblio and glossary + $in_bibliography = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*bibliography$/i); + $in_glossary = ($name =~ /^([A-Z]|\d+)?(\.\d+)*\s*glossary$/i); + # check node + if ($node) + { + warn "$ERROR Duplicate node found: $node\n" + if ($node2sec{$node}); + } + else + { + $name .= ' ' while ($node2sec{$name}); + $node = $name; + } + $name .= ' ' while ($sec2node{$name}); + $section = $name; + $node2sec{$node} = $name; + $sec2node{$name} = $node; + $node2href{$node} = "$docu_doc#$docid"; + $node2next{$node} = $node_next; + $node2prev{$node} = $node_prev; + $node2up{$node} = $node_up; + print "# node $node, section $name, level $level\n" + if $T2H_DEBUG & $DEBUG_TOC; + + $node = ''; + $node_next = ''; + $node_prev = ''; + $node_next = ''; + if ($tocid) + { + # update TOC + while ($level > $curlevel) { + $curlevel++; + push(@toc_lines, "
      \n"); + } + while ($level < $curlevel) { + $curlevel--; + push(@toc_lines, "
    \n"); + } + $_ = &t2h_anchor($tocid, "$docu_doc#$docid", $name, 1); + $_ = &substitute_style($_); + push(@stoc_lines, "$_
    \n") if ($level == 1); + if ($T2H_NUMBER_SECTIONS) + { + push(@toc_lines, $_ . "
    \n") + } + else + { + push(@toc_lines, "
  • " . $_ ."
    • "); + } + } + else + { + push(@lines, &html_debug("\n", + __LINE__)); + } + # update DOC + push(@lines, &html_debug('', __LINE__)); + &html_reset; + $_ = " $name \n\n"; + $_ = &debug($_, __LINE__); + push(@lines, &html_debug('', __LINE__)); + } + # update DOC + foreach $line (split(/\n+/, $_)) { + push(@lines, "$line\n"); + } + next; + } else { + warn "$ERROR Bad section line: $_"; + } + } else { + # track variables + $value{$1} = Unprotect_texi($2), next if /^\@set\s+($VARRE)\s+(.*)$/o; + delete $value{$1}, next if /^\@clear\s+($VARRE)\s*$/o; + # store things + $value{'_shorttitle'} = Unprotect_texi($1), next if /^\@shorttitle\s+(.*)$/; + $value{'_setfilename'} = Unprotect_texi($1), next if /^\@setfilename\s+(.*)$/; + $value{'_settitle'} = Unprotect_texi($1), next if /^\@settitle\s+(.*)$/; + $value{'_author'} .= Unprotect_texi($1)."\n", next if /^\@author\s+(.*)$/; + $value{'_subtitle'} .= Unprotect_texi($1)."\n", next if /^\@subtitle\s+(.*)$/; + $value{'_title'} .= Unprotect_texi($1)."\n", next if /^\@title\s+(.*)$/; + + # list item + if (/^\s*\@itemx?\s+/) { + $what = $'; + $what =~ s/\s+$//; + if ($in_bibliography && $use_bibliography) { + if ($what =~ /^$BIBRE$/o) { + $id = 'BIB' . ++$bib_num; + $bib2href{$what} = "$docu_doc#$id"; + print "# found bibliography for '$what' id $id\n" + if $T2H_DEBUG & $DEBUG_BIB; + $what = &t2h_anchor($id, '', $what); + } + } elsif ($in_glossary && $T2H_USE_GLOSSARY) { + $id = 'GLOSS' . ++$gloss_num; + $entry = $what; + $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; + $gloss2href{$entry} = "$docu_doc#$id"; + print "# found glossary for '$entry' id $id\n" + if $T2H_DEBUG & $DEBUG_GLOSS; + $what = &t2h_anchor($id, '', $what); + } + elsif ($in_table && ($table_type eq 'f' || $table_type eq 'v')) + { + EnterIndexEntry($table_type, $what, $docu_doc, $section, \@lines); + } + &html_pop_if('P'); + if ($html_element eq 'DL' || $html_element eq 'DD') { + if ($things_map{$in_table} && !$what) { + # special case to allow @table @bullet for instance + push(@lines, &debug("
    $things_map{$in_table}\n", __LINE__)); + } else { + push(@lines, &debug("
    \@$in_table\{$what\}\n", __LINE__)); + } + push(@lines, "
    "); + &html_push('DD') unless $html_element eq 'DD'; + if ($table_type) { # add also an index + unshift(@input_spool, "\@${table_type}index $what\n"); + } + } elsif ($html_element eq 'TABLE') { + push(@lines, &debug("$what\n", __LINE__)); + &html_push('TR'); + } elsif ($html_element eq 'TR') { + push(@lines, &debug("\n", __LINE__)); + push(@lines, &debug("$what\n", __LINE__)); + } else { + push(@lines, &debug("
  • $what\n", __LINE__)); + &html_push('LI') unless $html_element eq 'LI'; + } + push(@lines, &html_debug('', __LINE__)); + if ($deferred_ref) { + push(@lines, &debug("$deferred_ref\n", __LINE__)); + $deferred_ref = ''; + } + next; + } elsif (/^\@tab\s+(.*)$/) { + push(@lines, "$1\n"); + next; + } + } + } + # paragraph separator + if ($_ eq "\n" && ! $in_pre) { + next if $#lines >= 0 && $lines[$#lines] eq "\n"; + if ($html_element eq 'P') { + push (@lines, &debug("

    \n", __LINE__)); + } +# else +# { +# push(@lines, "

    \n"); +# $_ = &debug("

    \n", __LINE__); +# } + elsif ($html_element eq 'body' || $html_element eq 'BLOCKQUOTE' || $html_element eq 'DD' || $html_element eq 'LI') + { + &html_push('P'); + push(@lines, &debug("

    \n", __LINE__)); + } + } + # otherwise + push(@lines, $_) unless $in_titlepage; + push(@lines, &debug("\n", __LINE__)) if ($tag eq 'center'); +} + +# finish TOC +$level = 0; +while ($level < $curlevel) { + $curlevel--; + push(@toc_lines, "\n"); +} + +print "# end of pass 1\n" if $T2H_VERBOSE; + +SetDocumentLanguage('en') unless ($T2H_LANG); +#+++############################################################################ +# # +# Stuff related to Index generation # +# # +#---############################################################################ + +sub EnterIndexEntry +{ + my $prefix = shift; + my $key = shift; + my $docu_doc = shift; + my $section = shift; + my $lines = shift; + local $_; + + warn "$ERROR Undefined index command: $_", next + unless (exists ($index_properties->{$prefix})); + $key =~ s/\s+$//; + $_ = $key; + &protect_texi; + $key = $_; + $_ = &protect_html($_); + my $html_key = substitute_style($_); + my $id; + $key = remove_style($key); + $key = remove_things($key); + $_ = $key; + &unprotect_texi; + $key = $_; + while (exists $index->{$prefix}->{$key}) {$key .= ' '}; + if ($lines->[$#lines] =~ /^$/) + { + $id = $1; + } + else + { + $id = 'IDX' . ++$idx_num; + push(@$lines, &t2h_anchor($id, '', $T2H_INVISIBLE_MARK, !$in_pre)); + } + $index->{$prefix}->{$key}->{html_key} = $html_key; + $index->{$prefix}->{$key}->{section} = $section; + $index->{$prefix}->{$key}->{href} = "$docu_doc#$id"; + print "# found ${prefix}index for '$key' with id $id\n" + if $T2H_DEBUG & $DEBUG_INDEX; +} + +sub IndexName2Prefix +{ + my $name = shift; + my $prefix; + + for $prefix (keys %$index_properties) + { + return $prefix if ($index_properties->{$prefix}->{name} eq $name); + } + return undef; +} + +sub GetIndexEntries +{ + my $normal = shift; + my $code = shift; + my ($entries, $prefix, $key) = ({}); + + for $prefix (keys %$normal) + { + for $key (keys %{$index->{$prefix}}) + { + $entries->{$key} = {%{$index->{$prefix}->{$key}}}; + } + } + + if (defined($code)) + { + for $prefix (keys %$code) + { + unless (exists $normal->{$keys}) + { + for $key (keys %{$index->{$prefix}}) + { + $entries->{$key} = {%{$index->{$prefix}->{$key}}}; + $entries->{$key}->{html_key} = "$entries->{$key}->{html_key}"; + } + } + } + } + return $entries; +} + +sub byAlpha +{ + if ($a =~ /^[A-Za-z]/) + { + if ($b =~ /^[A-Za-z]/) + { + return lc($a) cmp lc($b); + } + else + { + return 1; + } + } + elsif ($b =~ /^[A-Za-z]/) + { + return -1; + } + else + { + return lc($a) cmp lc($b); + } +} + +sub GetIndexPages +{ + my $entries = shift; + my (@Letters, $key); + my ($EntriesByLetter, $Pages, $page) = ({}, [], {}); + my @keys = sort byAlpha keys %$entries; + + for $key (@keys) + { + push @{$EntriesByLetter->{uc(substr($key,0, 1))}} , $entries->{$key}; + } + @Letters = sort byAlpha keys %$EntriesByLetter; + + $T2H_SPLIT_INDEX = 0 unless ($T2H_SPLIT); + + unless ($T2H_SPLIT_INDEX) + { + $page->{First} = $Letters[0]; + $page->{Last} = $Letters[$#Letters]; + $page->{Letters} = \@Letters; + $page->{EntriesByLetter} = $EntriesByLetter; + push @$Pages, $page; + return $Pages; + } + + if ($T2H_SPLIT_INDEX =~ /^\d+$/) + { + my $i = 0; + my ($prev_letter, $letter); + $page->{First} = $Letters[0]; + for $letter (@Letters) + { + if ($i > $T2H_SPLIT_INDEX) + { + $page->{Last} = $prev_letter; + push @$Pages, {%$page}; + $page->{Letters} = []; + $page->{EntriesByLetter} = {}; + $page->{First} = $letter; + $i=0; + } + push @{$page->{Letters}}, $letter; + $page->{EntriesByLetter}->{$letter} = [@{$EntriesByLetter->{$letter}}]; + $i += scalar(@{$EntriesByLetter->{$letter}}); + $prev_letter = $letter; + } + $page->{Last} = $Letters[$#Letters]; + push @$Pages, {%$page}; + } + return $Pages; +} + +sub GetIndexSummary +{ + my $first_page = shift; + my $Pages = shift; + my $name = shift; + my ($page, $letter, $summary, $i, $l1, $l2, $l); + + $i = 0; + $summary = '
    Jump to:   '; + + for $page ($first_page, @$Pages) + { + for $letter (@{$page->{Letters}}) + { + $l = t2h_anchor('', "$page->{href}#${name}_$letter", "$letter", + 0, 'style="text-decoration:none"') . "\n   \n"; + + if ($letter =~ /^[A-Za-z]/) + { + $l2 .= $l; + } + else + { + $l1 .= $l; + } + } + } + $summary .= $l1 . "
    \n" if ($l1); + $summary .= $l2 . '

    '; + return $summary; +} + +sub PrintIndexPage +{ + my $lines = shift; + my $summary = shift; + my $page = shift; + my $name = shift; + + push @$lines, $summary; + + push @$lines , <

    + + + +EOT + + for $letter (@{$page->{Letters}}) + { + push @$lines, "\n"; + for $entry (@{$page->{EntriesByLetter}->{$letter}}) + { + push @$lines, + "\n"; + } + push @$lines, "\n"; + } + push @$lines, "
    Index Entry Section
    $letter
    " . + t2h_anchor('', $entry->{href}, $entry->{html_key}) . + "" . + t2h_anchor('', sec_href($entry->{section}), clean_name($entry->{section})) . + "

    "; + push @$lines, $summary; +} + +sub PrintIndex +{ + my $lines = shift; + my $name = shift; + my $section = shift; + $section = 'Top' unless $section; + my $prefix = IndexName2Prefix($name); + + warn ("$ERROR printindex: bad index name: $name"), return + unless $prefix; + + if ($index_properties->{$prefix}->{code}) + { + $index_properties->{$prefix}->{from_code}->{$prefix} = 1; + } + else + { + $index_properties->{$prefix}->{from}->{$prefix}= 1; + } + + my $Entries = GetIndexEntries($index_properties->{$prefix}->{from}, + $index_properties->{$prefix}->{from_code}); + return unless %$Entries; + + if ($T2H_IDX_SUMMARY) + { + my $key; + open(FHIDX, ">$docu_rdir$docu_name" . "_$name.idx") + || die "Can't open > $docu_rdir$docu_name" . "_$name.idx for writing: $!\n"; + print "# writing $name index summary in $docu_rdir$docu_name" . "_$name.idx...\n" if $T2H_VERBOSE; + + for $key (sort keys %$Entries) + { + print FHIDX "$key\t$Entries->{$key}->{href}\n"; + } + } + + my $Pages = GetIndexPages($Entries); + my $page; + my $first_page = shift @$Pages; + my $sec_name = $section; + # remove section number + $sec_name =~ s/.*? // if $sec_name =~ /^([A-Z]|\d+)\./; + + ($first_page->{href} = sec_href($section)) =~ s/\#.*$//; + # Update tree structure of document + if (@$Pages) + { + my $sec; + my @after; + + while (@sections && $sections[$#sections] ne $section) + { + unshift @after, pop @sections; + } + + for $page (@$Pages) + { + my $node = ($page->{First} ne $page->{Last} ? + "$sec_name: $page->{First} -- $page->{Last}" : + "$sec_name: $page->{First}"); + push @sections, $node; + $node2sec{$node} = $node; + $sec2node{$node} = $node; + $node2up{$node} = $section; + $page->{href} = next_doc(); + $page->{name} = $node; + $node2href{$node} = $page->{href}; + if ($prev_node) + { + $node2next{$prev_node} = $node; + $node2prev{$node} = $prev_node; + } + $prev_node = $node; + } + push @sections, @after; + } + + my $summary = GetIndexSummary($first_page, $Pages, $name); + PrintIndexPage($lines, $summary, $first_page, $name); + for $page (@$Pages) + { + push @$lines, ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND); + push @$lines, "

    $page->{name}

    \n"; + PrintIndexPage($lines, $summary, $page, $name); + } +} + + +#+++############################################################################ +# # +# Pass 2/3: handle style, menu, index, cross-reference # +# # +#---############################################################################ + +@lines2 = (); # whole document (2nd pass) +@lines3 = (); # whole document (3rd pass) +$in_menu = 0; # am I inside a menu + +while (@lines) { + $_ = shift(@lines); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@lines2, $_); + next; + } + # + # menu + # + if (/^\@menu\b/) + { + $in_menu = 1; + $in_menu_listing = 1; + push(@lines2, &debug("
    \n", __LINE__)); + next; + } + if (/^\@end\s+menu\b/) + { + if ($in_menu_listing) + { + push(@lines2, &debug("
    \n", __LINE__)); + } + else + { + push(@lines2, &debug("\n", __LINE__)); + } + $in_menu = 0; + $in_menu_listing = 0; + next; + } + if ($in_menu) + { + my ($node, $name, $descr); + if (/^\*\s+($NODERE)::/o) + { + $node = $1; + $descr = $'; + } + elsif (/^\*\s+(.+):\s+([^\t,\.\n]+)[\t,\.\n]/) + { + $name = $1; + $node = $2; + $descr = $'; + } + elsif (/^\*/) + { + warn "$ERROR Bad menu line: $_"; + } + else + { + if ($in_menu_listing) + { + $in_menu_listing = 0; + push(@lines2, &debug("\n", __LINE__)); + } + # should be like verbatim -- preseve spaces, etc + s/ /\ /g; + $_ .= "
    \n"; + push(@lines2, $_); + } + if ($node) + { + if (! $in_menu_listing) + { + $in_menu_listing = 1; + push(@lines2, &debug("\n", __LINE__)); + } + # look for continuation + while ($lines[0] =~ /^\s+\w+/) + { + $descr .= shift(@lines); + } + &menu_entry($node, $name, $descr); + } + next; + } + # + # printindex + # + PrintIndex(\@lines2, $2, $1), next + if (/^\@printindex\s+(\w+)/); + # + # simple style substitutions + # + $_ = &substitute_style($_); + # + # xref + # + while (/\@(x|px|info|)ref{([^{}]+)(}?)/) { + # note: Texinfo may accept other characters + ($type, $nodes, $full) = ($1, $2, $3); + ($before, $after) = ($`, $'); + if (! $full && $after) { + warn "$ERROR Bad xref (no ending } on line): $_"; + $_ = "$before$;0${type}ref\{$nodes$after"; + next; # while xref + } + if ($type eq 'x') { + $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} "; + } elsif ($type eq 'px') { + $type = "$T2H_WORDS->{$T2H_LANG}->{'see'} "; + } elsif ($type eq 'info') { + $type = "$T2H_WORDS->{$T2H_LANG}->{'See'} Info"; + } else { + $type = ''; + } + unless ($full) { + $next = shift(@lines); + $next = &substitute_style($next); + chop($nodes); # remove final newline + if ($next =~ /\}/) { # split on 2 lines + $nodes .= " $`"; + $after = $'; + } else { + $nodes .= " $next"; + $next = shift(@lines); + $next = &substitute_style($next); + chop($nodes); + if ($next =~ /\}/) { # split on 3 lines + $nodes .= " $`"; + $after = $'; + } else { + warn "$ERROR Bad xref (no ending }): $_"; + $_ = "$before$;0xref\{$nodes$after"; + unshift(@lines, $next); + next; # while xref + } + } + } + $nodes =~ s/\s+/ /g; # remove useless spaces + @args = split(/\s*,\s*/, $nodes); + $node = $args[0]; # the node is always the first arg + $node = &normalise_node($node); + $sec = $args[2] || $args[1] || $node2sec{$node}; + $href = $node2href{$node}; + if (@args == 5) { # reference to another manual + $sec = $args[2] || $node; + $man = $args[4] || $args[3]; + $_ = "${before}${type}$T2H_WORDS->{$T2H_LANG}->{'section'} `$sec' in \@cite{$man}$after"; + } elsif ($type =~ /Info/) { # inforef + warn "$ERROR Wrong number of arguments: $_" unless @args == 3; + ($nn, $_, $in) = @args; + $_ = "${before}${type} file `$in', node `$nn'$after"; + } elsif ($sec && $href && ! $T2H_SHORT_REF) { + $_ = "${before}${type}"; + $_ .= "$T2H_WORDS->{$T2H_LANG}->{'section'} " if ${type}; + $_ .= &t2h_anchor('', $href, $sec) . $after; + } + elsif ($href) + { + $_ = "${before}${type} " . + &t2h_anchor('', $href, $args[2] || $args[1] || $node) . + $after; + } + else { + warn "$ERROR Undefined node ($node): $_"; + $_ = "$before$;0xref{$nodes}$after"; + } + } + + # replace images + s[\@image\s*{(.+?)}] + { + my @args = split (/\s*,\s*/, $1); + my $base = $args[0]; + my $image = + LocateIncludeFile("$base.png") || + LocateIncludeFile("$base.jpg") || + LocateIncludeFile("$base.gif"); + warn "$ERROR no image file for $base: $_" unless ($image && -e $image); + "\"$base\""; + ($T2H_CENTER_IMAGE ? + "
    \"$base\"
    " : + "\"$base\""); + }eg; + + # + # try to guess bibliography references or glossary terms + # + unless (/^/) { + $done .= $pre . &t2h_anchor('', $href, $what); + } else { + $done .= "$pre$what"; + } + $_ = $post; + } + $_ = $done . $_; + } + if ($T2H_USE_GLOSSARY) { + $done = ''; + while (/\b\w+\b/) { + ($pre, $what, $post) = ($`, $&, $'); + $entry = $what; + $entry =~ tr/A-Z/a-z/ unless $entry =~ /^[A-Z\s]+$/; + $href = $gloss2href{$entry}; + if (defined($href) && $post !~ /^[^<]*<\/A>/) { + $done .= $pre . &t2h_anchor('', $href, $what); + } else { + $done .= "$pre$what"; + } + $_ = $post; + } + $_ = $done . $_; + } + } + # otherwise + push(@lines2, $_); +} +print "# end of pass 2\n" if $T2H_VERBOSE; + +# +# split style substitutions +# +while (@lines2) { + $_ = shift(@lines2); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@lines3, $_); + next; + } + # + # split style substitutions + # + $old = ''; + while ($old ne $_) { + $old = $_; + if (/\@(\w+)\{/) { + ($before, $style, $after) = ($`, $1, $'); + if (defined($style_map{$style})) { + $_ = $after; + $text = ''; + $after = ''; + $failed = 1; + while (@lines2) { + if (/\}/) { + $text .= $`; + $after = $'; + $failed = 0; + last; + } else { + $text .= $_; + $_ = shift(@lines2); + } + } + if ($failed) { + die "* Bad syntax (\@$style) after: $before\n"; + } else { + $text = &apply_style($style, $text); + $_ = "$before$text$after"; + } + } + } + } + # otherwise + push(@lines3, $_); +} +print "# end of pass 3\n" if $T2H_VERBOSE; + +#+++############################################################################ +# # +# Pass 4: foot notes, final cleanup # +# # +#---############################################################################ + +@foot_lines = (); # footnotes +@doc_lines = (); # final document +$end_of_para = 0; # true if last line is

    + +while (@lines3) { + $_ = shift(@lines3); + # + # special case (protected sections) + # + if (/^$PROTECTTAG/o) { + push(@doc_lines, $_); + $end_of_para = 0; + next; + } + # + # footnotes + # + while (/\@footnote([^\{\s]+)\{/) { + ($before, $d, $after) = ($`, $1, $'); + $_ = $after; + $text = ''; + $after = ''; + $failed = 1; + while (@lines3) { + if (/\}/) { + $text .= $`; + $after = $'; + $failed = 0; + last; + } else { + $text .= $_; + $_ = shift(@lines3); + } + } + if ($failed) { + die "* Bad syntax (\@footnote) after: $before\n"; + } else { + $foot_num++; + $docid = "DOCF$foot_num"; + $footid = "FOOT$foot_num"; + $foot = "($foot_num)"; + push(@foot_lines, "

    " . &t2h_anchor($footid, "$d#$docid", $foot) . "

    \n"); + $text = "

    $text" unless $text =~ /^\s*

    /; + push(@foot_lines, "$text\n"); + $_ = $before . &t2h_anchor($docid, "$docu_foot#$footid", $foot) . $after; + } + } + # + # remove unnecessary

    + # + if (/^\s*

    \s*$/) { + next if $end_of_para++; + } else { + $end_of_para = 0; + } + # otherwise + push(@doc_lines, $_); +} + +print "# end of pass 4\n" if $T2H_VERBOSE; + +#+++############################################################################ +# # +# Pass 5: print things # +# # +#---############################################################################ + +$T2H_L2H = &l2h_FinishToLatex if ($T2H_L2H); +$T2H_L2H = &l2h_ToHtml if ($T2H_L2H); +$T2H_L2H = &l2h_InitFromHtml if ($T2H_L2H); + +# fix node2up, node2prev, node2next, if desired +if ($has_top_command) +{ + for $section (keys %sec2number) + { + $node = $sec2node{$section}; + $node2up{$node} = Sec2UpNode($section) unless $node2up{$node}; + $node2prev{$node} = Sec2PrevNode($section) unless $node2prev{$node}; + $node2next{$node} = Sec2NextNode($section) unless $node2next{$node}; + } +} + +# prepare %T2H_THISDOC +$T2H_THISDOC{fulltitle} = $value{'_title'} || $value{'_settitle'} || "Untitled Document"; +$T2H_THISDOC{title} = $value{'_settitle'} || $T2H_THISDOC{fulltitle}; +$T2H_THISDOC{author} = $value{'_author'}; +$T2H_THISDOC{subtitle} = $value{'_subtitle'}; +$T2H_THISDOC{shorttitle} = $value{'_shorttitle'}; +for $key (keys %T2H_THISDOC) +{ + $_ = &substitute_style($T2H_THISDOC{$key}); + &unprotect_texi; + s/\s*$//; + $T2H_THISDOC{$key} = $_; +} + +# if no sections, then simply print document as is +unless (@sections) +{ + print "# Writing content into $docu_top_file \n" if $T2H_VERBOSE; + open(FILE, "> $docu_top_file") + || die "$ERROR: Can't open $docu_top_file for writing: $!\n"; + + &$T2H_print_page_head(\*FILE); + $T2H_THIS_SECTION = \@doc_lines; + t2h_print_lines(\*FILE); + &$T2H_print_foot_navigation(\*FILE); + &$T2H_print_page_foot(\*FILE); + close(FILE); + goto Finish; +} + +# initialize $T2H_HREF, $T2H_NAME +%T2H_HREF = + ( + 'First' , sec_href($sections[0]), + 'Last', sec_href($sections[$#sections]), + 'About', $docu_about. '#SEC_About', + ); + +# prepare TOC, OVERVIEW, TOP +$T2H_TOC = \@toc_lines; +$T2H_OVERVIEW = \@stoc_lines; +if ($has_top) +{ + while (1) + { + $_ = shift @doc_lines; + last if /$TOPEND/; + push @$T2H_TOP, $_; + } + $T2H_HREF{'Top'} = $docu_top . '#SEC_Top'; +} +else +{ + $T2H_HREF{'Top'} = $T2H_HREF{First}; +} + +$node2href{Top} = $T2H_HREF{Top}; +$T2H_HREF{Contents} = $docu_toc.'#SEC_Contents' if @toc_lines; +$T2H_HREF{Overview} = $docu_stoc.'#SEC_OVERVIEW' if @stoc_lines; + +# settle on index +if ($T2H_INDEX_CHAPTER) +{ + $T2H_HREF{Index} = $node2href{normalise_node($T2H_INDEX_CHAPTER)}; + warn "$ERROR T2H_INDEX_CHAPTER '$T2H_INDEX_CHAPTER' not found\n" + unless $T2H_HREF{Index}; +} +if (! $T2H_HREF{Index} && $first_index_chapter) +{ + $T2H_INDEX_CHAPTER = $first_index_chapter; + $T2H_HREF{Index} = $node2href{$T2H_INDEX_CHAPTER}; +} + +print "# Using '" . clean_name($T2H_INDEX_CHAPTER) . "' as index page\n" + if ($T2H_VERBOSE && $T2H_HREF{Index}); + +%T2H_NAME = + ( + 'First', clean_name($sec2node{$sections[0]}), + 'Last', clean_name($sec2node{$sections[$#sections]}), + 'About', $T2H_WORDS->{$T2H_LANG}->{'About_Title'}, + 'Contents', $T2H_WORDS->{$T2H_LANG}->{'ToC_Title'}, + 'Overview', $T2H_WORDS->{$T2H_LANG}->{'Overview_Title'}, + 'Index' , clean_name($T2H_INDEX_CHAPTER), + 'Top', clean_name($T2H_TOP_HEADING || $T2H_THISDOC{'title'} || $T2H_THISDOC{'shorttitle'}), + ); + +############################################################################# +# print frame and frame toc file +# +if ( $T2H_FRAMES ) +{ + open(FILE, "> $docu_frame_file") + || die "$ERROR: Can't open $docu_frame_file for writing: $!\n"; + print "# Creating frame in $docu_frame_file ...\n" if $T2H_VERBOSE; + &$T2H_print_frame(\*FILE); + close(FILE); + + open(FILE, "> $docu_toc_frame_file") + || die "$ERROR: Can't open $docu_toc_frame_file for writing: $!\n"; + print "# Creating toc frame in $docu_frame_file ...\n" if $T2H_VERBOSE; + &$T2H_print_toc_frame(\*FILE); + close(FILE); +} + + +############################################################################# +# print Top +# +open(FILE, "> $docu_top_file") + || die "$ERROR: Can't open $docu_top_file for writing: $!\n"; +&$T2H_print_page_head(\*FILE) unless ($T2H_SPLIT); + +if ($has_top) +{ + print "# Creating Top in $docu_top_file ...\n" if $T2H_VERBOSE; + $T2H_THIS_SECTION = $T2H_TOP; + $T2H_HREF{This} = $T2H_HREF{Top}; + $T2H_NAME{This} = $T2H_NAME{Top}; + &$T2H_print_Top(\*FILE); +} + +close(FILE) if $T2H_SPLIT; + +############################################################################# +# Print sections +# +$T2H_NODE{Forward} = $sec2node{$sections[0]}; +$T2H_NAME{Forward} = &clean_name($sec2node{$sections[0]}); +$T2H_HREF{Forward} = sec_href($sections[0]); +$T2H_NODE{This} = 'Top'; +$T2H_NAME{This} = $T2H_NAME{Top}; +$T2H_HREF{This} = $T2H_HREF{Top}; +if ($T2H_SPLIT) +{ + print "# writing " . scalar(@sections) . + " sections in $docu_rdir$docu_name"."_[1..$doc_num]" + if $T2H_VERBOSE; + $previous = ($T2H_SPLIT eq 'chapter' ? $CHAPTEREND : $SECTIONEND); + undef $FH; + $doc_num = 0; +} +else +{ + print "# writing " . scalar(@sections) . " sections in $docu_top_file ..." + if $T2H_VERBOSE; + $FH = \*FILE; + $previous = ''; +} + +$counter = 0; +# loop through sections +while ($section = shift(@sections)) +{ + if ($T2H_SPLIT && ($T2H_SPLIT eq 'section' || $previous eq $CHAPTEREND)) + { + if ($FH) + { + #close previous page + &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter'; + &$T2H_print_page_foot($FH); + close($FH); + undef $FH; + } + } + $T2H_NAME{Back} = $T2H_NAME{This}; + $T2H_HREF{Back} = $T2H_HREF{This}; + $T2H_NODE{Back} = $T2H_NODE{This}; + $T2H_NAME{This} = $T2H_NAME{Forward}; + $T2H_HREF{This} = $T2H_HREF{Forward}; + $T2H_NODE{This} = $T2H_NODE{Forward}; + if ($sections[0]) + { + $T2H_NODE{Forward} = $sec2node{$sections[0]}; + $T2H_NAME{Forward} = &clean_name($T2H_NODE{Forward}); + $T2H_HREF{Forward} = sec_href($sections[0]); + } + else + { + undef $T2H_HREF{Forward}, $T2H_NODE{Forward}, $T2H_NAME{Forward}; + } + + $node = $node2up{$T2H_NODE{This}}; + $T2H_HREF{Up} = $node2href{$node}; + if ($T2H_HREF{Up} eq $T2H_HREF{This} || ! $T2H_HREF{Up}) + { + $T2H_NAME{Up} = $T2H_NAME{Top}; + $T2H_HREF{Up} = $T2H_HREF{Top}; + $T2H_NODE{Up} = 'Up'; + } + else + { + $T2H_NAME{Up} = &clean_name($node); + $T2H_NODE{Up} = $node; + } + + $node = $T2H_NODE{This}; + $node = $node2prev{$node}; + $T2H_NAME{Prev} = &clean_name($node); + $T2H_HREF{Prev} = $node2href{$node}; + $T2H_NODE{Prev} = $node; + + $node = $T2H_NODE{This}; + if ($node2up{$node} && $node2up{$node} ne 'Top'&& + ($node2prev{$node} eq $T2H_NODE{Back} || ! $node2prev{$node})) + { + $node = $node2up{$node}; + while ($node && $node ne $node2up{$node} && ! $node2prev{$node}) + { + $node = $node2up{$node}; + } + $node = $node2prev{$node} + unless $node2up{$node} eq 'Top' || ! $node2up{$node}; + } + else + { + $node = $node2prev{$node}; + } + $T2H_NAME{FastBack} = &clean_name($node); + $T2H_HREF{FastBack} = $node2href{$node}; + $T2H_NODE{FastBack} = $node; + + $node = $T2H_NODE{This}; + $node = $node2next{$node}; + $T2H_NAME{Next} = &clean_name($node); + $T2H_HREF{Next} = $node2href{$node}; + $T2H_NODE{Next} = $node; + + $node = $T2H_NODE{This}; + if ($node2up{$node} && $node2up{$node} ne 'Top'&& + ($node2next{$node} eq $T2H_NODE{Forward} || ! $node2next{$node})) + { + $node = $node2up{$node}; + while ($node && $node ne $node2up{$node} && ! $node2next{$node}) + { + $node = $node2up{$node}; + } + } + $node = $node2next{$node}; + $T2H_NAME{FastForward} = &clean_name($node); + $T2H_HREF{FastForward} = $node2href{$node}; + $T2H_NODE{FastForward} = $node; + + if (! defined($FH)) + { + my $file = $T2H_HREF{This}; + $file =~ s/\#.*$//; + open(FILE, "> $docu_rdir$file") || + die "$ERROR: Can't open $docu_rdir$file for writing: $!\n"; + $FH = \*FILE; + &$T2H_print_page_head($FH); + t2h_print_label($FH); + &$T2H_print_chapter_header($FH) if $T2H_SPLIT eq 'chapter'; + } + else + { + t2h_print_label($FH); + } + + $T2H_THIS_SECTION = []; + while (@doc_lines) { + $_ = shift(@doc_lines); + last if ($_ eq $SECTIONEND || $_ eq $CHAPTEREND); + push(@$T2H_THIS_SECTION, $_); + } + $previous = $_; + &$T2H_print_section($FH); + + if ($T2H_VERBOSE) + { + $counter++; + print "." if $counter =~ /00$/; + } +} +if ($T2H_SPLIT) +{ + &$T2H_print_chapter_footer($FH) if $T2H_SPLIT eq 'chapter'; + &$T2H_print_page_foot($FH); + close($FH); +} +print "\n" if $T2H_VERBOSE; + +############################################################################# +# Print ToC, Overview, Footnotes +# +undef $T2H_HREF{Prev}; +undef $T2H_HREF{Next}; +undef $T2H_HREF{Back}; +undef $T2H_HREF{Forward}; +undef $T2H_HREF{Up}; + +if (@foot_lines) +{ + print "# writing Footnotes in $docu_foot_file...\n" if $T2H_VERBOSE; + open (FILE, "> $docu_foot_file") || die "$ERROR: Can't open $docu_foot_file for writing: $!\n" + if $T2H_SPLIT; + $T2H_HREF{This} = $docu_foot; + $T2H_NAME{This} = $T2H_WORDS->{$T2H_LANG}->{'Footnotes_Title'}; + $T2H_THIS_SECTION = \@foot_lines; + &$T2H_print_Footnotes(\*FILE); + close(FILE) if $T2H_SPLIT; +} + +if (@toc_lines) +{ + print "# writing Toc in $docu_toc_file...\n" if $T2H_VERBOSE; + open (FILE, "> $docu_toc_file") || die "$ERROR: Can't open $docu_toc_file for writing: $!\n" + if $T2H_SPLIT; + $T2H_HREF{This} = $T2H_HREF{Contents}; + $T2H_NAME{This} = $T2H_NAME{Contents}; + $T2H_THIS_SECTION = \@toc_lines; + &$T2H_print_Toc(\*FILE); + close(FILE) if $T2H_SPLIT; +} + +if (@stoc_lines) +{ + print "# writing Overview in $docu_stoc_file...\n" if $T2H_VERBOSE; + open (FILE, "> $docu_stoc_file") || die "$ERROR: Can't open $docu_stoc_file for writing: $!\n" + if $T2H_SPLIT; + + $T2H_HREF{This} = $T2H_HREF{Overview}; + $T2H_NAME{This} = $T2H_NAME{Overview}; + $T2H_THIS_SECTION = \@stoc_lines; + unshift @$T2H_THIS_SECTION, "

    \n"; + push @$T2H_THIS_SECTION, "\n
    \n"; + &$T2H_print_Overview(\*FILE); + close(FILE) if $T2H_SPLIT; +} + +if ($about_body = &$T2H_about_body()) +{ + print "# writing About in $docu_about_file...\n" if $T2H_VERBOSE; + open (FILE, "> $docu_about_file") || die "$ERROR: Can't open $docu_about_file for writing: $!\n" + if $T2H_SPLIT; + + $T2H_HREF{This} = $T2H_HREF{About}; + $T2H_NAME{This} = $T2H_NAME{About}; + $T2H_THIS_SECTION = [$about_body]; + &$T2H_print_About(\*FILE); + close(FILE) if $T2H_SPLIT; +} + +unless ($T2H_SPLIT) +{ + &$T2H_print_page_foot(\*FILE); + close (FILE); +} + +Finish: +&l2h_FinishFromHtml if ($T2H_L2H); +&l2h_Finish if($T2H_L2H); +print "# that's all folks\n" if $T2H_VERBOSE; + +exit(0); + +#+++############################################################################ +# # +# Low level functions # +# # +#---############################################################################ + +sub LocateIncludeFile +{ + my $file = shift; + my $dir; + + return $file if (-e $file && -r $file); + foreach $dir (@T2H_INCLUDE_DIRS) + { + return "$dir/$file" if (-e "$dir/$file" && -r "$dir/$file"); + } + return undef; +} + +sub clean_name +{ + local ($_); + $_ = &remove_style($_[0]); + &unprotect_texi; + return $_; +} + +sub update_sec_num { + local($name, $level) = @_; + my $ret; + + $level--; # here we start at 0 + if ($name =~ /^appendix/ || defined(@appendix_sec_num)) { + # appendix style + if (defined(@appendix_sec_num)) { + &incr_sec_num($level, @appendix_sec_num); + } else { + @appendix_sec_num = ('A', 0, 0, 0); + } + $ret = join('.', @appendix_sec_num[0..$level]); + } else { + # normal style + if (defined(@normal_sec_num)) + { + &incr_sec_num($level, @normal_sec_num); + } + else + { + @normal_sec_num = (1, 0, 0, 0); + } + $ret = join('.', @normal_sec_num[0..$level]); + } + + $ret .= "." if $level == 0; + return $ret; +} + +sub incr_sec_num { + local($level, $l); + $level = shift(@_); + $_[$level]++; + foreach $l ($level+1 .. 3) { + $_[$l] = 0; + } +} + +sub Sec2UpNode +{ + my $sec = shift; + my $num = $sec2number{$sec}; + + return '' unless $num; + return 'Top' unless $num =~ /\.\d+/; + $num =~ s/\.[^\.]*$//; + $num = $num . '.' unless $num =~ /\./; + return $sec2node{$number2sec{$num}}; +} + +sub Sec2PrevNode +{ + my $sec = shift; + my $num = $sec2number{$sec}; + my ($i, $post); + + if ($num =~ /(\w+)(\.$|$)/) + { + $num = $`; + $i = $1; + $post = $2; + if ($i eq 'A') + { + $i = $normal_sec_num[0]; + } + elsif ($i ne '1') + { + # unfortunately, -- operator is not magical + $i = chr(ord($i) + 1); + } + else + { + return ''; + } + return $sec2node{$number2sec{$num . $i . $post}} + } + return ''; +} + +sub Sec2NextNode +{ + my $sec = shift; + my $num = $sec2number{$sec}; + my $i; + + if ($num =~ /(\w+)(\.$|$)/) + { + $num = $`; + $i = $1; + $post = $2; + if ($post eq '.' && $i eq $normal_sec_num[0]) + { + $i = 'A'; + } + else + { + $i++; + } + return $sec2node{$number2sec{$num . $i . $post}} + } + return ''; +} + +sub check { + local($_, %seen, %context, $before, $match, $after); + + while (<>) { + if (/\@(\*|\.|\:|\@|\{|\})/) { + $seen{$&}++; + $context{$&} .= "> $_" if $T2H_VERBOSE; + $_ = "$`XX$'"; + redo; + } + if (/\@(\w+)/) { + ($before, $match, $after) = ($`, $&, $'); + if ($before =~ /\b[\w-]+$/ && $after =~ /^[\w-.]*\b/) { # e-mail address + $seen{'e-mail address'}++; + $context{'e-mail address'} .= "> $_" if $T2H_VERBOSE; + } else { + $seen{$match}++; + $context{$match} .= "> $_" if $T2H_VERBOSE; + } + $match =~ s/^\@/X/; + $_ = "$before$match$after"; + redo; + } + } + + foreach (sort(keys(%seen))) { + if ($T2H_VERBOSE) { + print "$_\n"; + print $context{$_}; + } else { + print "$_ ($seen{$_})\n"; + } + } +} + +sub open { + local($name) = @_; + + ++$fh_name; + if (open($fh_name, $name)) { + unshift(@fhs, $fh_name); + } else { + warn "$ERROR Can't read file $name: $!\n"; + } +} + +sub init_input { + @fhs = (); # hold the file handles to read + @input_spool = (); # spooled lines to read + $fh_name = 'FH000'; + &open($docu); +} + +sub next_line { + local($fh, $line); + + if (@input_spool) { + $line = shift(@input_spool); + return($line); + } + while (@fhs) { + $fh = $fhs[0]; + $line = <$fh>; + return($line) if $line; + close($fh); + shift(@fhs); + } + return(undef); +} + +# used in pass 1, use &next_line +sub skip_until { + local($tag) = @_; + local($_); + + while ($_ = &next_line) { + return if /^\@end\s+$tag\s*$/; + } + die "* Failed to find '$tag' after: " . $lines[$#lines]; +} + +# used in pass 1 for l2h use &next_line +sub string_until { + local($tag) = @_; + local($_, $string); + + while ($_ = &next_line) { + return $string if /^\@end\s+$tag\s*$/; +# $_ =~ s/hbox/mbox/g; + $string = $string.$_; + } + die "* Failed to find '$tag' after: " . $lines[$#lines]; +} + +# +# HTML stacking to have a better HTML output +# + +sub html_reset { + @html_stack = ('html'); + $html_element = 'body'; +} + +sub html_push { + local($what) = @_; + push(@html_stack, $html_element); + $html_element = $what; +} + +sub html_push_if { + local($what) = @_; + push(@html_stack, $html_element) + if ($html_element && $html_element ne 'P'); + $html_element = $what; +} + +sub html_pop { + $html_element = pop(@html_stack); +} + +sub html_pop_if { + local($elt); + + if (@_) { + foreach $elt (@_) { + if ($elt eq $html_element) { + $html_element = pop(@html_stack) if @html_stack; + last; + } + } + } else { + $html_element = pop(@html_stack) if @html_stack; + } +} + +sub html_debug { + local($what, $line) = @_; + if ($T2H_DEBUG & $DEBUG_HTML) + { + $what = "\n" unless $what; + return("$what") + } + return($what); +} + +# to debug the output... +sub debug { + local($what, $line) = @_; + return("$what") + if $T2H_DEBUG & $DEBUG_HTML; + return($what); +} + +sub SimpleTexi2Html +{ + local $_ = $_[0]; + &protect_texi; + &protect_html; + $_ = substitute_style($_); + $_[0] = $_; +} + +sub normalise_node { + local $_ = $_[0]; + s/\s+/ /g; + s/ $//; + s/^ //; + &protect_texi; + &protect_html; + $_ = substitute_style($_); + $_[0] = $_; +} + +sub menu_entry +{ + my ($node, $name, $descr) = @_; + my ($href, $entry); + + &normalise_node($node); + $href = $node2href{$node}; + if ($href) + { + $descr =~ s/^\s+//; + $descr =~ s/\s*$//; + $descr = SimpleTexi2Html($descr); + if ($T2H_NUMBER_SECTIONS && !$T2H_NODE_NAME_IN_MENU && $node2sec{$node}) + { + $entry = $node2sec{$node}; + $name = ''; + } + else + { + &normalise_node($name); + $entry = ($name && ($name ne $node || ! $T2H_AVOID_MENU_REDUNDANCY) + ? "$name : $node" : $node); + } + + if ($T2H_AVOID_MENU_REDUNDANCY && $descr) + { + my $clean_entry = $entry; + $clean_entry =~ s/^.*? // if ($clean_entry =~ /^([A-Z]|\d+)\.[\d\.]* /); + $clean_entry =~ s/[^\w]//g; + my $clean_descr = $descr; + $clean_descr =~ s/[^\w]//g; + $descr = '' if ($clean_entry eq $clean_descr) + } + push(@lines2,&debug('    \n", __LINE__)); + } + elsif ($node =~ /^\(.*\)\w+/) + { + push(@lines2,&debug('\n", __LINE__)) + } + else + { + warn "$ERROR Undefined node of menu_entry ($node): $_"; + } +} + +sub do_ctrl { "^$_[0]" } + +sub do_email { + local($addr, $text) = split(/,\s*/, $_[0]); + + $text = $addr unless $text; + &t2h_anchor('', "mailto:$addr", $text); +} + +sub do_sc +{ + # l2h does this much better + return &l2h_ToLatex("{\\sc ".&unprotect_html($_[0])."}") if ($T2H_L2H); + return "\U$_[0]\E"; +} + +sub do_math +{ + return &l2h_ToLatex("\$".&unprotect_html($_[0])."\$") if ($T2H_L2H); + return "".$text.""; +} + +sub do_uref { + local($url, $text, $only_text) = split(/,\s*/, $_[0]); + + $text = $only_text if $only_text; + $text = $url unless $text; + &t2h_anchor('', $url, $text); +} + +sub do_url { &t2h_anchor('', $_[0], $_[0]) } + +sub do_acronym +{ + return '' . $_[0] . ''; +} + +sub do_accent +{ + return "&$_[0]acute;" if $_[1] eq 'H'; + return "$_[0]." if $_[1] eq 'dotaccent'; + return "$_[0]*" if $_[1] eq 'ringaccent'; + return "$_[0]".'[' if $_[1] eq 'tieaccent'; + return "$_[0]".'(' if $_[1] eq 'u'; + return "$_[0]_" if $_[1] eq 'ubaraccent'; + return ".$_[0]" if $_[1] eq 'udotaccent'; + return "$_[0]<" if $_[1] eq 'v'; + return "&$_[0]cedil;" if $_[1] eq ','; + return "$_[0]" if $_[1] eq 'dotless'; + return undef; +} + +sub apply_style { + local($texi_style, $text) = @_; + local($style); + + $style = $style_map{$texi_style}; + if (defined($style)) { # known style + if ($style =~ /^\"/) { # add quotes + $style = $'; + $text = "\`$text\'"; + } + if ($style =~ /^\&/) { # custom + $style = $'; + $text = &$style($text, $texi_style); + } elsif ($style) { # good style + $text = "<$style>$text"; + } else { # no style + } + } else { # unknown style + $text = undef; + } + return($text); +} + +# remove Texinfo styles +sub remove_style { + local($_) = @_; + 1 while(s/\@\w+{([^\{\}]+)}/$1/g); + return($_); +} + +sub remove_things +{ + local ($_) = @_; + s|\@(\w+)\{\}|$1|g; + return $_; +} + +sub substitute_style { + local($_) = @_; + local($changed, $done, $style, $text); + + &simple_substitutions; + $changed = 1; + while ($changed) { + $changed = 0; + $done = ''; + while (/\@(\w+){([^\{\}]+)}/ || /\@(,){([^\{\}]+)}/) { + $text = &apply_style($1, $2); + if ($text) { + $_ = "$`$text$'"; + $changed = 1; + } else { + $done .= "$`\@$1"; + $_ = "{$2}$'"; + } + } + $_ = $done . $_; + } + return($_); +} + +sub t2h_anchor { + local($name, $href, $text, $newline, $extra_attribs) = @_; + local($result); + + $result = " + $what =~ s/\&/\&\#38;/g; + $what =~ s/\/\&\#62;/g; + # restore anything in quotes + # this fixes my problem where I had: + # < IMG SRC="leftarrow.gif" ALT="<--" > but what if I wanted < in my ALT text ?? + # maybe byte stuffing or some other technique should be used. + $what =~ s/\"([^\&]+)\&\#60;(.*)\"/"$1<$2"/g; + $what =~ s/\"([^\&]+)\&\#62;(.*)\"/"$1>$2"/g; + $what =~ s/\"([^\&]+)\&\#38;(.*)\"/"$1&$2"/g; + # but recognize some HTML things + $what =~ s/\&\#60;\/A\&\#62;/<\/A>/g; # + $what =~ s/\&\#60;A ([^\&]+)\&\#62;//g; # + $what =~ s/\&\#60;IMG ([^\&]+)\&\#62;//g; # + return($what); +} + +sub unprotect_texi { + s/$;0/\@/go; + s/$;1/\{/go; + s/$;2/\}/go; + s/$;3/\`/go; + s/$;4/\'/go; +} + +sub Unprotect_texi +{ + local $_ = shift; + &unprotect_texi; + return($_); +} + +sub unprotect_html { + local($what) = @_; + $what =~ s/\&\#38;/\&/g; + $what =~ s/\&\#60;/\/g; + return($what); +} + +sub t2h_print_label +{ + my $fh = shift; + my $href = shift || $T2H_HREF{This}; + $href =~ s/.*#(.*)$/$1/; + print $fh qq{\n}; +} + +############################################################################## + + # These next few lines are legal in both Perl and nroff. + +.00 ; # finish .ig + +'di \" finish diversion--previous line must be blank +.nr nl 0-1 \" fake up transition to first page again +.nr % 0 \" start at page 1 +'; __END__ ############# From here on it's a standard manual page ############ +.so /usr/local/man/man1/texi2html.1 diff --git a/readline/readline/doc/version.texi b/readline/readline/doc/version.texi new file mode 100644 index 0000000000..576c35c839 --- /dev/null +++ b/readline/readline/doc/version.texi @@ -0,0 +1,10 @@ +@ignore +Copyright (C) 1988-2018 Free Software Foundation, Inc. +@end ignore + +@set EDITION 8.0 +@set VERSION 8.0 +@set UPDATED 30 November 2018 +@set UPDATED-MONTH November 2018 + +@set LASTCHANGE Fri Nov 30 22:50:53 EST 2018 diff --git a/readline/readline/emacs_keymap.c b/readline/readline/emacs_keymap.c new file mode 100644 index 0000000000..b5e53f494a --- /dev/null +++ b/readline/readline/emacs_keymap.c @@ -0,0 +1,872 @@ +/* emacs_keymap.c -- the keymap for emacs_mode in readline (). */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (BUFSIZ) +#include +#endif /* !BUFSIZ */ + +#include "readline.h" + +/* An array of function pointers, one for each possible key. + If the type byte is ISKMAP, then the pointer is the address of + a keymap. */ + +KEYMAP_ENTRY_ARRAY emacs_standard_keymap = { + + /* Control keys. */ + { ISFUNC, rl_set_mark }, /* Control-@ */ + { ISFUNC, rl_beg_of_line }, /* Control-a */ + { ISFUNC, rl_backward_char }, /* Control-b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ + { ISFUNC, rl_delete }, /* Control-d */ + { ISFUNC, rl_end_of_line }, /* Control-e */ + { ISFUNC, rl_forward_char }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, rl_rubout }, /* Control-h */ + { ISFUNC, rl_complete }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, rl_clear_screen }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_get_next_history }, /* Control-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ + { ISFUNC, rl_get_previous_history }, /* Control-p */ + { ISFUNC, rl_quoted_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_unix_word_rubout }, /* Control-w */ + { ISKMAP, (rl_command_func_t *)emacs_ctlx_keymap }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ + { ISKMAP, (rl_command_func_t *)emacs_meta_keymap }, /* Control-[ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ + { ISFUNC, rl_char_search }, /* Control-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ + { ISFUNC, rl_undo_command }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_insert }, /* SPACE */ + { ISFUNC, rl_insert }, /* ! */ + { ISFUNC, rl_insert }, /* " */ + { ISFUNC, rl_insert }, /* # */ + { ISFUNC, rl_insert }, /* $ */ + { ISFUNC, rl_insert }, /* % */ + { ISFUNC, rl_insert }, /* & */ + { ISFUNC, rl_insert }, /* ' */ + { ISFUNC, rl_insert }, /* ( */ + { ISFUNC, rl_insert }, /* ) */ + { ISFUNC, rl_insert }, /* * */ + { ISFUNC, rl_insert }, /* + */ + { ISFUNC, rl_insert }, /* , */ + { ISFUNC, rl_insert }, /* - */ + { ISFUNC, rl_insert }, /* . */ + { ISFUNC, rl_insert }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_insert }, /* 0 */ + { ISFUNC, rl_insert }, /* 1 */ + { ISFUNC, rl_insert }, /* 2 */ + { ISFUNC, rl_insert }, /* 3 */ + { ISFUNC, rl_insert }, /* 4 */ + { ISFUNC, rl_insert }, /* 5 */ + { ISFUNC, rl_insert }, /* 6 */ + { ISFUNC, rl_insert }, /* 7 */ + { ISFUNC, rl_insert }, /* 8 */ + { ISFUNC, rl_insert }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, rl_insert }, /* : */ + { ISFUNC, rl_insert }, /* ; */ + { ISFUNC, rl_insert }, /* < */ + { ISFUNC, rl_insert }, /* = */ + { ISFUNC, rl_insert }, /* > */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_insert }, /* A */ + { ISFUNC, rl_insert }, /* B */ + { ISFUNC, rl_insert }, /* C */ + { ISFUNC, rl_insert }, /* D */ + { ISFUNC, rl_insert }, /* E */ + { ISFUNC, rl_insert }, /* F */ + { ISFUNC, rl_insert }, /* G */ + { ISFUNC, rl_insert }, /* H */ + { ISFUNC, rl_insert }, /* I */ + { ISFUNC, rl_insert }, /* J */ + { ISFUNC, rl_insert }, /* K */ + { ISFUNC, rl_insert }, /* L */ + { ISFUNC, rl_insert }, /* M */ + { ISFUNC, rl_insert }, /* N */ + { ISFUNC, rl_insert }, /* O */ + { ISFUNC, rl_insert }, /* P */ + { ISFUNC, rl_insert }, /* Q */ + { ISFUNC, rl_insert }, /* R */ + { ISFUNC, rl_insert }, /* S */ + { ISFUNC, rl_insert }, /* T */ + { ISFUNC, rl_insert }, /* U */ + { ISFUNC, rl_insert }, /* V */ + { ISFUNC, rl_insert }, /* W */ + { ISFUNC, rl_insert }, /* X */ + { ISFUNC, rl_insert }, /* Y */ + { ISFUNC, rl_insert }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_insert }, /* [ */ + { ISFUNC, rl_insert }, /* \ */ + { ISFUNC, rl_insert }, /* ] */ + { ISFUNC, rl_insert }, /* ^ */ + { ISFUNC, rl_insert }, /* _ */ + { ISFUNC, rl_insert }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_insert }, /* a */ + { ISFUNC, rl_insert }, /* b */ + { ISFUNC, rl_insert }, /* c */ + { ISFUNC, rl_insert }, /* d */ + { ISFUNC, rl_insert }, /* e */ + { ISFUNC, rl_insert }, /* f */ + { ISFUNC, rl_insert }, /* g */ + { ISFUNC, rl_insert }, /* h */ + { ISFUNC, rl_insert }, /* i */ + { ISFUNC, rl_insert }, /* j */ + { ISFUNC, rl_insert }, /* k */ + { ISFUNC, rl_insert }, /* l */ + { ISFUNC, rl_insert }, /* m */ + { ISFUNC, rl_insert }, /* n */ + { ISFUNC, rl_insert }, /* o */ + { ISFUNC, rl_insert }, /* p */ + { ISFUNC, rl_insert }, /* q */ + { ISFUNC, rl_insert }, /* r */ + { ISFUNC, rl_insert }, /* s */ + { ISFUNC, rl_insert }, /* t */ + { ISFUNC, rl_insert }, /* u */ + { ISFUNC, rl_insert }, /* v */ + { ISFUNC, rl_insert }, /* w */ + { ISFUNC, rl_insert }, /* x */ + { ISFUNC, rl_insert }, /* y */ + { ISFUNC, rl_insert }, /* z */ + + /* Final punctuation. */ + { ISFUNC, rl_insert }, /* { */ + { ISFUNC, rl_insert }, /* | */ + { ISFUNC, rl_insert }, /* } */ + { ISFUNC, rl_insert }, /* ~ */ + { ISFUNC, rl_rubout }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Pure 8-bit characters (128 - 159). + These might be used in some + character sets. */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + + /* ISO Latin-1 characters (160 - 255) */ + { ISFUNC, rl_insert }, /* No-break space */ + { ISFUNC, rl_insert }, /* Inverted exclamation mark */ + { ISFUNC, rl_insert }, /* Cent sign */ + { ISFUNC, rl_insert }, /* Pound sign */ + { ISFUNC, rl_insert }, /* Currency sign */ + { ISFUNC, rl_insert }, /* Yen sign */ + { ISFUNC, rl_insert }, /* Broken bar */ + { ISFUNC, rl_insert }, /* Section sign */ + { ISFUNC, rl_insert }, /* Diaeresis */ + { ISFUNC, rl_insert }, /* Copyright sign */ + { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ + { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Not sign */ + { ISFUNC, rl_insert }, /* Soft hyphen */ + { ISFUNC, rl_insert }, /* Registered sign */ + { ISFUNC, rl_insert }, /* Macron */ + { ISFUNC, rl_insert }, /* Degree sign */ + { ISFUNC, rl_insert }, /* Plus-minus sign */ + { ISFUNC, rl_insert }, /* Superscript two */ + { ISFUNC, rl_insert }, /* Superscript three */ + { ISFUNC, rl_insert }, /* Acute accent */ + { ISFUNC, rl_insert }, /* Micro sign */ + { ISFUNC, rl_insert }, /* Pilcrow sign */ + { ISFUNC, rl_insert }, /* Middle dot */ + { ISFUNC, rl_insert }, /* Cedilla */ + { ISFUNC, rl_insert }, /* Superscript one */ + { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ + { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ + { ISFUNC, rl_insert }, /* Vulgar fraction one half */ + { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ + { ISFUNC, rl_insert }, /* Inverted questionk mark */ + { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin capital letter ae */ + { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Multiplication sign */ + { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ + { ISFUNC, rl_insert }, /* Latin small letter a with grave */ + { ISFUNC, rl_insert }, /* Latin small letter a with acute */ + { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin small letter ae */ + { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin small letter e with grave */ + { ISFUNC, rl_insert }, /* Latin small letter e with acute */ + { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter i with grave */ + { ISFUNC, rl_insert }, /* Latin small letter i with acute */ + { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with grave */ + { ISFUNC, rl_insert }, /* Latin small letter o with acute */ + { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Division sign */ + { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin small letter u with grave */ + { ISFUNC, rl_insert }, /* Latin small letter u with acute */ + { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter y with acute */ + { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ + { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ +#endif /* KEYMAP_SIZE > 128 */ +}; + +KEYMAP_ENTRY_ARRAY emacs_meta_keymap = { + + /* Meta keys. Just like above, but the high bit is set. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-@ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-c */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-d */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-f */ + { ISFUNC, rl_abort }, /* Meta-Control-g */ + { ISFUNC, rl_backward_kill_word }, /* Meta-Control-h */ + { ISFUNC, rl_tab_insert }, /* Meta-Control-i */ + { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-j */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-k */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-l */ + { ISFUNC, rl_vi_editing_mode }, /* Meta-Control-m */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-o */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-q */ + { ISFUNC, rl_revert_line }, /* Meta-Control-r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-s */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-t */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-x */ + { ISFUNC, rl_yank_nth_arg }, /* Meta-Control-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-z */ + + { ISFUNC, rl_complete }, /* Meta-Control-[ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-\ */ + { ISFUNC, rl_backward_char_search }, /* Meta-Control-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-^ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_set_mark }, /* Meta-SPACE */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-! */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-" */ + { ISFUNC, rl_insert_comment }, /* Meta-# */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-$ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-% */ + { ISFUNC, rl_tilde_expand }, /* Meta-& */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-' */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-( */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-) */ + { ISFUNC, rl_insert_completions }, /* Meta-* */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-+ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-, */ + { ISFUNC, rl_digit_argument }, /* Meta-- */ + { ISFUNC, rl_yank_last_arg}, /* Meta-. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-/ */ + + /* Regular digits. */ + { ISFUNC, rl_digit_argument }, /* Meta-0 */ + { ISFUNC, rl_digit_argument }, /* Meta-1 */ + { ISFUNC, rl_digit_argument }, /* Meta-2 */ + { ISFUNC, rl_digit_argument }, /* Meta-3 */ + { ISFUNC, rl_digit_argument }, /* Meta-4 */ + { ISFUNC, rl_digit_argument }, /* Meta-5 */ + { ISFUNC, rl_digit_argument }, /* Meta-6 */ + { ISFUNC, rl_digit_argument }, /* Meta-7 */ + { ISFUNC, rl_digit_argument }, /* Meta-8 */ + { ISFUNC, rl_digit_argument }, /* Meta-9 */ + + /* A little more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-: */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-; */ + { ISFUNC, rl_beginning_of_history }, /* Meta-< */ + { ISFUNC, rl_possible_completions }, /* Meta-= */ + { ISFUNC, rl_end_of_history }, /* Meta-> */ + { ISFUNC, rl_possible_completions }, /* Meta-? */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-@ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-A */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-B */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-C */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-D */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-E */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-F */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-G */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-H */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-I */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-J */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-K */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-L */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-M */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-N */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-O */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-P */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Q */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-R */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-S */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-T */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-U */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-V */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-W */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-X */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Y */ + { ISFUNC, rl_do_lowercase_version }, /* Meta-Z */ + + /* Some more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-[ */ /* was rl_arrow_keys */ + { ISFUNC, rl_delete_horizontal_space }, /* Meta-\ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-^ */ + { ISFUNC, rl_yank_last_arg }, /* Meta-_ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-` */ + + /* Lowercase alphabet. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-a */ + { ISFUNC, rl_backward_word }, /* Meta-b */ + { ISFUNC, rl_capitalize_word }, /* Meta-c */ + { ISFUNC, rl_kill_word }, /* Meta-d */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-e */ + { ISFUNC, rl_forward_word }, /* Meta-f */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-g */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-h */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-i */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-j */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-k */ + { ISFUNC, rl_downcase_word }, /* Meta-l */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-m */ + { ISFUNC, rl_noninc_forward_search }, /* Meta-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-o */ /* was rl_arrow_keys */ + { ISFUNC, rl_noninc_reverse_search }, /* Meta-p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-q */ + { ISFUNC, rl_revert_line }, /* Meta-r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-s */ + { ISFUNC, rl_transpose_words }, /* Meta-t */ + { ISFUNC, rl_upcase_word }, /* Meta-u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-x */ + { ISFUNC, rl_yank_pop }, /* Meta-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-z */ + + /* Final punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-{ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-| */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Meta-} */ + { ISFUNC, rl_tilde_expand }, /* Meta-~ */ + { ISFUNC, rl_backward_kill_word }, /* Meta-rubout */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; + +KEYMAP_ENTRY_ARRAY emacs_ctlx_keymap = { + + /* Control keys. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-d */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-h */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-i */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-j */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-k */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-l */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-m */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-q */ + { ISFUNC, rl_re_read_init_file }, /* Control-r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-s */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-t */ + { ISFUNC, rl_undo_command }, /* Control-u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-w */ + { ISFUNC, rl_exchange_point_and_mark }, /* Control-x */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-[ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* SPACE */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* # */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* $ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* % */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* & */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ + { ISFUNC, rl_start_kbd_macro }, /* ( */ + { ISFUNC, rl_end_kbd_macro }, /* ) */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* * */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* + */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* , */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* - */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* . */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* / */ + + /* Regular digits. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 0 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 1 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 2 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 3 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 4 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 5 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 6 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 7 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 8 */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ; */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* = */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ? */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* A */ + { ISFUNC, rl_do_lowercase_version }, /* B */ + { ISFUNC, rl_do_lowercase_version }, /* C */ + { ISFUNC, rl_do_lowercase_version }, /* D */ + { ISFUNC, rl_do_lowercase_version }, /* E */ + { ISFUNC, rl_do_lowercase_version }, /* F */ + { ISFUNC, rl_do_lowercase_version }, /* G */ + { ISFUNC, rl_do_lowercase_version }, /* H */ + { ISFUNC, rl_do_lowercase_version }, /* I */ + { ISFUNC, rl_do_lowercase_version }, /* J */ + { ISFUNC, rl_do_lowercase_version }, /* K */ + { ISFUNC, rl_do_lowercase_version }, /* L */ + { ISFUNC, rl_do_lowercase_version }, /* M */ + { ISFUNC, rl_do_lowercase_version }, /* N */ + { ISFUNC, rl_do_lowercase_version }, /* O */ + { ISFUNC, rl_do_lowercase_version }, /* P */ + { ISFUNC, rl_do_lowercase_version }, /* Q */ + { ISFUNC, rl_do_lowercase_version }, /* R */ + { ISFUNC, rl_do_lowercase_version }, /* S */ + { ISFUNC, rl_do_lowercase_version }, /* T */ + { ISFUNC, rl_do_lowercase_version }, /* U */ + { ISFUNC, rl_do_lowercase_version }, /* V */ + { ISFUNC, rl_do_lowercase_version }, /* W */ + { ISFUNC, rl_do_lowercase_version }, /* X */ + { ISFUNC, rl_do_lowercase_version }, /* Y */ + { ISFUNC, rl_do_lowercase_version }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* [ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* \ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ^ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* _ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* c */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* d */ + { ISFUNC, rl_call_last_kbd_macro }, /* e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* f */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* h */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* i */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* j */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* k */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* l */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* m */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* o */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* s */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* t */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* x */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* | */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ~ */ + { ISFUNC, rl_backward_kill_line }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; diff --git a/readline/readline/examples/ChangeLog.gdb b/readline/readline/examples/ChangeLog.gdb new file mode 100644 index 0000000000..1dd9a21581 --- /dev/null +++ b/readline/readline/examples/ChangeLog.gdb @@ -0,0 +1,18 @@ +2019-10-23 Jan Kratochvil + + Imported readline 6.2, and upstream patch 001. + +2006-04-24 Daniel Jacobowitz + + Imported readline 5.1, and upstream patches 001-004. + +2002-02-24 Elena Zannoni + + * ChangeLog.gdb: Rename from ChangeLog.Cygnus. + +2000-07-09 Elena Zannoni + + * Import of readline 4.1. + + New files: excallback.c, rlfe.c. + diff --git a/readline/readline/examples/Inputrc b/readline/readline/examples/Inputrc new file mode 100644 index 0000000000..a358bc476d --- /dev/null +++ b/readline/readline/examples/Inputrc @@ -0,0 +1,81 @@ +# My ~/.inputrc file is in -*- text -*- for easy editing with Emacs. +# +# Notice the various bindings which are conditionalized depending +# on which program is running, or what terminal is active. +# + +# Copyright (C) 1989-2009 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +# In all programs, all terminals, make sure this is bound. +"\C-x\C-r": re-read-init-file + +# Hp terminals (and some others) have ugly default behaviour for C-h. +"\C-h": backward-delete-char +"\e\C-h": backward-kill-word +"\C-xd": dump-functions + +# In xterm windows, make the arrow keys do the right thing. +$if TERM=xterm +"\e[A": previous-history +"\e[B": next-history +"\e[C": forward-char +"\e[D": backward-char + +# alternate arrow key prefix +"\eOA": previous-history +"\eOB": next-history +"\eOC": forward-char +"\eOD": backward-char + +# Under Xterm in Bash, we bind local Function keys to do something useful. +$if Bash +"\e[11~": "Function Key 1" +"\e[12~": "Function Key 2" +"\e[13~": "Function Key 3" +"\e[14~": "Function Key 4" +"\e[15~": "Function Key 5" + +# I know the following escape sequence numbers are 1 greater than +# the function key. Don't ask me why, I didn't design the xterm terminal. +"\e[17~": "Function Key 6" +"\e[18~": "Function Key 7" +"\e[19~": "Function Key 8" +"\e[20~": "Function Key 9" +"\e[21~": "Function Key 10" +$endif +$endif + +# For Bash, all terminals, add some Bash specific hacks. +$if Bash +"\C-xv": show-bash-version +"\C-x\C-e": shell-expand-line + +# Here is one for editing my path. +"\C-xp": "$PATH\C-x\C-e\C-e\"\C-aPATH=\":\C-b" + +# Make C-x r read my mail in emacs. +# "\C-xr": "emacs -f rmail\C-j" +$endif + +# For FTP, different hacks: +$if Ftp +"\C-xg": "get \M-?" +"\C-xt": "put \M-?" +"\M-.": yank-last-arg +$endif + +" ": self-insert diff --git a/readline/readline/examples/Makefile.in b/readline/readline/examples/Makefile.in new file mode 100644 index 0000000000..4a7c39e0a4 --- /dev/null +++ b/readline/readline/examples/Makefile.in @@ -0,0 +1,188 @@ +# +# This is the Makefile for the readline examples subdirectory. +# +# Copyright (C) 1994,2008,2009 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +RL_LIBRARY_VERSION = @LIBVERSION@ + +SHELL = @MAKE_SHELL@ +RM = rm -f + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +datarootdir = @datarootdir@ + +bindir = @bindir@ +srcdir = @srcdir@ +datadir = @datadir@ +VPATH = @srcdir@ +top_srcdir = @top_srcdir@ +#BUILD_DIR = . +BUILD_DIR = @BUILD_DIR@ +installdir = $(datadir)/readline + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +EXEEXT = @EXEEXT@ +OBJEXT = @OBJEXT@ + +# Support an alternate destination root directory for package building +DESTDIR = + +DEFS = @DEFS@ +CC = @CC@ +CFLAGS = @CFLAGS@ +LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DREADLINE_LIBRARY -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' +CPPFLAGS = @CPPFLAGS@ + +INCLUDES = -I$(srcdir) -I$(top_srcdir) -I.. + +CCFLAGS = $(ASAN_CFLAGS) $(DEFS) $(LOCAL_CFLAGS) $(INCLUDES) $(CPPFLAGS) \ + $(CFLAGS) +LDFLAGS = -g -L.. @LDFLAGS@ $(ASAN_LDFLAGS) + +ASAN_XCFLAGS = -fsanitize=address -fno-omit-frame-pointer +ASAN_XLDFLAGS = -fsanitize=address + +READLINE_LIB = ../libreadline.a +HISTORY_LIB = ../libhistory.a + +TERMCAP_LIB = @TERMCAP_LIB@ + +.c.o: + ${RM} $@ + $(CC) $(CCFLAGS) -c $< + +SOURCES = excallback.c fileman.c histexamp.c manexamp.c rl-fgets.c rl.c \ + rlbasic.c rlcat.c rlevent.c rlptytest.c rltest.c rlversion.c \ + rltest2.c rl-callbacktest.c hist_erasedups.c hist_purgecmd.c \ + rlkeymaps.c + +EXECUTABLES = fileman$(EXEEXT) rltest$(EXEEXT) rl$(EXEEXT) rlcat$(EXEEXT) \ + rlevent$(EXEEXT) rlversion$(EXEEXT) histexamp$(EXEEXT) \ + rl-callbacktest$(EXEEXT) rlbasic$(EXEEXT) \ + hist_erasedups$(EXEEXT) hist_purgecmd$(EXEEXT) \ + rlkeymaps$(EXEEXT) + +OBJECTS = fileman.o rltest.o rl.o rlevent.o rlcat.o rlversion.o histexamp.o \ + rltest2.o rl-callbacktest.o rlbasic.o hist_erasedups.o hist_purgecmd.o \ + rlkeymaps.o + +OTHEREXE = rlptytest$(EXEEXT) +OTHEROBJ = rlptytest.o + +all: $(EXECUTABLES) +everything: all + +asan: + ${MAKE} ${MFLAGS} ASAN_CFLAGS='${ASAN_XCFLAGS}' ASAN_LDFLAGS='${ASAN_XLDFLAGS}' all + +check: rlversion$(EXEEXT) + @echo Readline version: `rlversion$(EXEEXT)` + +installdirs: + -$(SHELL) $(top_srcdir)/support/mkdirs $(DESTDIR)$(installdir) + +install: installdirs + @for f in $(SOURCES); do \ + $(RM) $(DESTDIR)$(installdir)/$$f ; \ + $(INSTALL_DATA) $(srcdir)/$$f $(DESTDIR)$(installdir) ; \ + done + +uninstall: + @for f in $(SOURCES); do \ + $(RM) $(DESTDIR)$(installdir)/$$f ; \ + done + -rmdir $(DESTDIR)$(installdir) + +rl$(EXEEXT): rl.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rl.o $(READLINE_LIB) $(TERMCAP_LIB) + +rlbasic$(EXEEXT): rlbasic.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlbasic.o $(READLINE_LIB) $(TERMCAP_LIB) + +rlcat$(EXEEXT): rlcat.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlcat.o $(READLINE_LIB) $(TERMCAP_LIB) + +rlevent$(EXEEXT): rlevent.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlevent.o $(READLINE_LIB) $(TERMCAP_LIB) + +rlkeymaps$(EXEEXT): rlkeymaps.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlkeymaps.o $(READLINE_LIB) $(TERMCAP_LIB) + +fileman$(EXEEXT): fileman.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ fileman.o $(READLINE_LIB) $(TERMCAP_LIB) + +rltest$(EXEEXT): rltest.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rltest.o $(READLINE_LIB) $(TERMCAP_LIB) + +rltest2$(EXEEXT): rltest2.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rltest2.o $(READLINE_LIB) $(TERMCAP_LIB) + +rl-callbacktest$(EXEEXT): rl-callbacktest.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rl-callbacktest.o $(READLINE_LIB) $(TERMCAP_LIB) + +rlptytest$(EXEEXT): rlptytest.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlptytest.o $(READLINE_LIB) $(TERMCAP_LIB) $(LIBUTIL) + +rlversion$(EXEEXT): rlversion.o $(READLINE_LIB) + $(CC) $(LDFLAGS) -o $@ rlversion.o $(READLINE_LIB) $(TERMCAP_LIB) + +histexamp$(EXEEXT): histexamp.o $(HISTORY_LIB) + $(CC) $(LDFLAGS) -o $@ histexamp.o -lhistory $(TERMCAP_LIB) + +hist_erasedups$(EXEEXT): hist_erasedups.o $(HISTORY_LIB) + $(CC) $(LDFLAGS) -o $@ hist_erasedups.o -lhistory $(TERMCAP_LIB) + +hist_purgecmd$(EXEEXT): hist_purgecmd.o $(HISTORY_LIB) + $(CC) $(LDFLAGS) -o $@ hist_purgecmd.o -lhistory $(TERMCAP_LIB) + +clean mostlyclean: + $(RM) $(OBJECTS) $(OTHEROBJ) + $(RM) $(EXECUTABLES) $(OTHEREXE) *.exe + +distclean maintainer-clean: clean + $(RM) Makefile + +fileman.o: fileman.c +rltest.o: rltest.c +rltest2.o: rltest2.c +rl.o: rl.c +rlversion.o: rlversion.c +histexamp.o: histexamp.c +hist_erasedups.o: hist_erasedups.c +hist_purgecmd.o: hist_purgecmd.c +rlbasic.o: rlbasic.c +rlkeymaps.o: rlkeymaps.c +rlcat.o: rlcat.c +rlptytest.o: rlptytest.c +rl-callbacktest.o: rl-callbacktest.c + +fileman.o: $(top_srcdir)/readline.h +rltest.o: $(top_srcdir)/readline.h +rltest2.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h +rl.o: $(top_srcdir)/readline.h +rlversion.o: $(top_srcdir)/readline.h +histexamp.o: $(top_srcdir)/history.h +hist_erasedups.o: $(top_srcdir)/history.h +hist_purgecmd.o: $(top_srcdir)/history.h +rlbasic.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h +rlcat.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h +rlptytest.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h +rl-callbacktest.o: $(top_srcdir)/readline.h $(top_srcdir)/history.h diff --git a/readline/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP b/readline/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP new file mode 100644 index 0000000000..5e895513c3 --- /dev/null +++ b/readline/readline/examples/autoconf/BASH_CHECK_LIB_TERMCAP @@ -0,0 +1,40 @@ +AC_DEFUN([BASH_CHECK_LIB_TERMCAP], +[ +if test "X$bash_cv_termcap_lib" = "X"; then +_bash_needmsg=yes +else +AC_MSG_CHECKING(which library has the termcap functions) +_bash_needmsg= +fi +AC_CACHE_VAL(bash_cv_termcap_lib, +[AC_CHECK_FUNC(tgetent, bash_cv_termcap_lib=libc, + [AC_CHECK_LIB(termcap, tgetent, bash_cv_termcap_lib=libtermcap, + [AC_CHECK_LIB(tinfo, tgetent, bash_cv_termcap_lib=libtinfo, + [AC_CHECK_LIB(curses, tgetent, bash_cv_termcap_lib=libcurses, + [AC_CHECK_LIB(ncurses, tgetent, bash_cv_termcap_lib=libncurses, + bash_cv_termcap_lib=gnutermcap)])])])])]) +if test "X$_bash_needmsg" = "Xyes"; then +AC_MSG_CHECKING(which library has the termcap functions) +fi +AC_MSG_RESULT(using $bash_cv_termcap_lib) +if test $bash_cv_termcap_lib = gnutermcap && test -z "$prefer_curses"; then +LDFLAGS="$LDFLAGS -L./lib/termcap" +TERMCAP_LIB="./lib/termcap/libtermcap.a" +TERMCAP_DEP="./lib/termcap/libtermcap.a" +elif test $bash_cv_termcap_lib = libtermcap && test -z "$prefer_curses"; then +TERMCAP_LIB=-ltermcap +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libtinfo; then +TERMCAP_LIB=-ltinfo +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libncurses; then +TERMCAP_LIB=-lncurses +TERMCAP_DEP= +elif test $bash_cv_termcap_lib = libc; then +TERMCAP_LIB= +TERMCAP_DEP= +else +TERMCAP_LIB=-lcurses +TERMCAP_DEP= +fi +]) diff --git a/readline/readline/examples/autoconf/RL_LIB_READLINE_VERSION b/readline/readline/examples/autoconf/RL_LIB_READLINE_VERSION new file mode 100644 index 0000000000..883942c4b3 --- /dev/null +++ b/readline/readline/examples/autoconf/RL_LIB_READLINE_VERSION @@ -0,0 +1,118 @@ +dnl need: prefix exec_prefix libdir includedir CC TERMCAP_LIB +dnl require: +dnl AC_PROG_CC +dnl BASH_CHECK_LIB_TERMCAP + +AC_DEFUN([RL_LIB_READLINE_VERSION], +[ +AC_REQUIRE([BASH_CHECK_LIB_TERMCAP]) + +AC_MSG_CHECKING([version of installed readline library]) + +# What a pain in the ass this is. + +# save cpp and ld options +_save_CFLAGS="$CFLAGS" +_save_LDFLAGS="$LDFLAGS" +_save_LIBS="$LIBS" + +# Don't set ac_cv_rl_prefix if the caller has already assigned a value. This +# allows the caller to do something like $_rl_prefix=$withval if the user +# specifies --with-installed-readline=PREFIX as an argument to configure + +if test -z "$ac_cv_rl_prefix"; then +test "x$prefix" = xNONE && ac_cv_rl_prefix=$ac_default_prefix || ac_cv_rl_prefix=${prefix} +fi + +eval ac_cv_rl_includedir=${ac_cv_rl_prefix}/include +eval ac_cv_rl_libdir=${ac_cv_rl_prefix}/lib + +LIBS="$LIBS -lreadline ${TERMCAP_LIB}" +CFLAGS="$CFLAGS -I${ac_cv_rl_includedir}" +LDFLAGS="$LDFLAGS -L${ac_cv_rl_libdir}" + +AC_CACHE_VAL(ac_cv_rl_version, +[AC_TRY_RUN([ +#include +#include + +extern int rl_gnu_readline_p; + +main() +{ + FILE *fp; + fp = fopen("conftest.rlv", "w"); + if (fp == 0) + exit(1); + if (rl_gnu_readline_p != 1) + fprintf(fp, "0.0\n"); + else + fprintf(fp, "%s\n", rl_library_version ? rl_library_version : "0.0"); + fclose(fp); + exit(0); +} +], +ac_cv_rl_version=`cat conftest.rlv`, +ac_cv_rl_version='0.0', +ac_cv_rl_version='4.2')]) + +CFLAGS="$_save_CFLAGS" +LDFLAGS="$_save_LDFLAGS" +LIBS="$_save_LIBS" + +RL_MAJOR=0 +RL_MINOR=0 + +# ( +case "$ac_cv_rl_version" in +2*|3*|4*|5*|6*|7*|8*|9*) + RL_MAJOR=`echo $ac_cv_rl_version | sed 's:\..*$::'` + RL_MINOR=`echo $ac_cv_rl_version | sed -e 's:^.*\.::' -e 's:[[a-zA-Z]]*$::'` + ;; +esac + +# ((( +case $RL_MAJOR in +[[0-9][0-9]]) _RL_MAJOR=$RL_MAJOR ;; +[[0-9]]) _RL_MAJOR=0$RL_MAJOR ;; +*) _RL_MAJOR=00 ;; +esac + +# ((( +case $RL_MINOR in +[[0-9][0-9]]) _RL_MINOR=$RL_MINOR ;; +[[0-9]]) _RL_MINOR=0$RL_MINOR ;; +*) _RL_MINOR=00 ;; +esac + +RL_VERSION="0x${_RL_MAJOR}${_RL_MINOR}" + +# Readline versions greater than 4.2 have these defines in readline.h + +if test $ac_cv_rl_version = '0.0' ; then + AC_MSG_WARN([Could not test version of installed readline library.]) +elif test $RL_MAJOR -gt 4 || { test $RL_MAJOR = 4 && test $RL_MINOR -gt 2 ; } ; then + # set these for use by the caller + RL_PREFIX=$ac_cv_rl_prefix + RL_LIBDIR=$ac_cv_rl_libdir + RL_INCLUDEDIR=$ac_cv_rl_includedir + AC_MSG_RESULT($ac_cv_rl_version) +else + +AC_DEFINE_UNQUOTED(RL_READLINE_VERSION, $RL_VERSION, [encoded version of the installed readline library]) +AC_DEFINE_UNQUOTED(RL_VERSION_MAJOR, $RL_MAJOR, [major version of installed readline library]) +AC_DEFINE_UNQUOTED(RL_VERSION_MINOR, $RL_MINOR, [minor version of installed readline library]) + +AC_SUBST(RL_VERSION) +AC_SUBST(RL_MAJOR) +AC_SUBST(RL_MINOR) + +# set these for use by the caller +RL_PREFIX=$ac_cv_rl_prefix +RL_LIBDIR=$ac_cv_rl_libdir +RL_INCLUDEDIR=$ac_cv_rl_includedir + +AC_MSG_RESULT($ac_cv_rl_version) + +fi +]) diff --git a/readline/readline/examples/autoconf/wi_LIB_READLINE b/readline/readline/examples/autoconf/wi_LIB_READLINE new file mode 100644 index 0000000000..c7383220b9 --- /dev/null +++ b/readline/readline/examples/autoconf/wi_LIB_READLINE @@ -0,0 +1,76 @@ +dnl Borut Razem +dnl +dnl This macro checks for the presence of the readline library. +dnl It works also in cross-compilation environment. +dnl +dnl To get it into the aclocal.m4 dnl file, do this: +dnl aclocal -I . --verbose +dnl +dnl The --verbose will show all of the files that are searched +dnl for .m4 macros. + +AC_DEFUN([wi_LIB_READLINE], [ + dnl check for the readline.h header file + + AC_CHECK_HEADER(readline/readline.h) + + if test "$ac_cv_header_readline_readline_h" = yes; then + dnl check the readline version + + cat > conftest.$ac_ext < +#include +wi_LIB_READLINE_VERSION RL_VERSION_MAJOR RL_VERSION_MINOR +EOF + + wi_READLINE_VERSION=$($CPP $CPPFLAGS conftest.$ac_ext | sed -n -e "s/^wi_LIB_READLINE_VERSION *\([[0-9\]][[0-9\]]*\) *\([[0-9\]][[0-9\]]*\)$/\1.\2/p") + rm -rf conftest* + + if test -n "$wi_READLINE_VERSION"; then + wi_MAJOR=$(expr $wi_READLINE_VERSION : '\([[0-9]][[0-9]]*\)\.') + wi_MINOR=$(expr $wi_READLINE_VERSION : '[[0-9]][[0-9]]*\.\([[0-9]][[0-9]]*$\)') + if test $wi_MINOR -lt 10; then + wi_MINOR=$(expr $wi_MINOR \* 10) + fi + wi_READLINE_VERSION=$(expr $wi_MAJOR \* 100 + $wi_MINOR) + else + wi_READLINE_VERSION=-1 + fi + + dnl check for the readline library + + ac_save_LIBS="$LIBS" + # Note: $LIBCURSES is permitted to be empty. + + for LIBREADLINE in "-lreadline.dll" "-lreadline" "-lreadline $LIBCURSES" "-lreadline -ltermcap" "-lreadline -lncurses" "-lreadline -lcurses" + do + AC_MSG_CHECKING([for GNU Readline library $LIBREADLINE]) + + LIBS="$ac_save_LIBS $LIBREADLINE" + + AC_TRY_LINK([ + /* includes */ + #include + #include + ],[ + /* function-body */ + int dummy = rl_completion_append_character; /* rl_completion_append_character appeared in version 2.1 */ + readline(NULL); + ],[ + wi_cv_lib_readline=yes + AC_MSG_RESULT(yes) + ],[ + wi_cv_lib_readline=no + AC_MSG_RESULT(no) + ]) + + if test "$wi_cv_lib_readline" = yes; then + AC_SUBST(LIBREADLINE) + AC_DEFINE_UNQUOTED(HAVE_LIBREADLINE, $wi_READLINE_VERSION, [Readline]) + break + fi + done + + LIBS="$ac_save_LIBS" + fi +]) diff --git a/readline/readline/examples/excallback.c b/readline/readline/examples/excallback.c new file mode 100644 index 0000000000..4206acfca4 --- /dev/null +++ b/readline/readline/examples/excallback.c @@ -0,0 +1,196 @@ +/* +From: Jeff Solomon +Date: Fri, 9 Apr 1999 10:13:27 -0700 (PDT) +To: chet@po.cwru.edu +Subject: new readline example +Message-ID: <14094.12094.527305.199695@mrclean.Stanford.EDU> + +Chet, + +I've been using readline 4.0. Specifically, I've been using the perl +version Term::ReadLine::Gnu. It works great. + +Anyway, I've been playing around the alternate interface and I wanted +to contribute a little C program, callback.c, to you that you could +use as an example of the alternate interface in the /examples +directory of the readline distribution. + +My example shows how, using the alternate interface, you can +interactively change the prompt (which is very nice imo). Also, I +point out that you must roll your own terminal setting when using the +alternate interface because readline depreps (using your parlance) the +terminal while in the user callback. I try to demostrate what I mean +with an example. I've included the program below. + +To compile, I just put the program in the examples directory and made +the appropriate changes to the EXECUTABLES and OBJECTS line and added +an additional target 'callback'. + +I compiled on my Sun Solaris2.6 box using Sun's cc. + +Let me know what you think. + +Jeff +*/ +/* +Copyright (C) 1999 Jeff Solomon +*/ + +#if defined (HAVE_CONFIG_H) +#include +#endif + +#include + +#ifdef HAVE_UNISTD_H +#include +#endif +#include + +#include +#include /* xxx - should make this more general */ + +#ifdef READLINE_LIBRARY +# include "readline.h" +#else +# include +#endif + +#ifndef STDIN_FILENO +# define STDIN_FILENO 0 +#endif + +/* This little examples demonstrates the alternate interface to using readline. + * In the alternate interface, the user maintains control over program flow and + * only calls readline when STDIN is readable. Using the alternate interface, + * you can do anything else while still using readline (like talking to a + * network or another program) without blocking. + * + * Specifically, this program highlights two importants features of the + * alternate interface. The first is the ability to interactively change the + * prompt, which can't be done using the regular interface since rl_prompt is + * read-only. + * + * The second feature really highlights a subtle point when using the alternate + * interface. That is, readline will not alter the terminal when inside your + * callback handler. So let's so, your callback executes a user command that + * takes a non-trivial amount of time to complete (seconds). While your + * executing the command, the user continues to type keystrokes and expects them + * to be re-echoed on the new prompt when it returns. Unfortunately, the default + * terminal configuration doesn't do this. After the prompt returns, the user + * must hit one additional keystroke and then will see all of his previous + * keystrokes. To illustrate this, compile and run this program. Type "sleep" at + * the prompt and then type "bar" before the prompt returns (you have 3 + * seconds). Notice how "bar" is re-echoed on the prompt after the prompt + * returns? This is what you expect to happen. Now comment out the 4 lines below + * the line that says COMMENT LINE BELOW. Recompile and rerun the program and do + * the same thing. When the prompt returns, you should not see "bar". Now type + * "f", see how "barf" magically appears? This behavior is un-expected and not + * desired. + */ + +void process_line(char *line); +int change_prompt(void); +char *get_prompt(void); + +int prompt = 1; +char prompt_buf[40], line_buf[256]; +tcflag_t old_lflag; +cc_t old_vtime; +struct termios term; + +int +main() +{ + fd_set fds; + + /* Adjust the terminal slightly before the handler is installed. Disable + * canonical mode processing and set the input character time flag to be + * non-blocking. + */ + if( tcgetattr(STDIN_FILENO, &term) < 0 ) { + perror("tcgetattr"); + exit(1); + } + old_lflag = term.c_lflag; + old_vtime = term.c_cc[VTIME]; + term.c_lflag &= ~ICANON; + term.c_cc[VTIME] = 1; + /* COMMENT LINE BELOW - see above */ + if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) { + perror("tcsetattr"); + exit(1); + } + + rl_add_defun("change-prompt", change_prompt, CTRL('t')); + rl_callback_handler_install(get_prompt(), process_line); + + while(1) { + FD_ZERO(&fds); + FD_SET(fileno(stdin), &fds); + + if( select(FD_SETSIZE, &fds, NULL, NULL, NULL) < 0) { + perror("select"); + exit(1); + } + + if( FD_ISSET(fileno(stdin), &fds) ) { + rl_callback_read_char(); + } + } +} + +void +process_line(char *line) +{ + if( line == NULL ) { + fprintf(stderr, "\n", line); + + /* reset the old terminal setting before exiting */ + term.c_lflag = old_lflag; + term.c_cc[VTIME] = old_vtime; + if( tcsetattr(STDIN_FILENO, TCSANOW, &term) < 0 ) { + perror("tcsetattr"); + exit(1); + } + exit(0); + } + + if( strcmp(line, "sleep") == 0 ) { + sleep(3); + } else { + fprintf(stderr, "|%s|\n", line); + } + + free (line); +} + +int +change_prompt(void) +{ + /* toggle the prompt variable */ + prompt = !prompt; + + /* save away the current contents of the line */ + strcpy(line_buf, rl_line_buffer); + + /* install a new handler which will change the prompt and erase the current line */ + rl_callback_handler_install(get_prompt(), process_line); + + /* insert the old text on the new line */ + rl_insert_text(line_buf); + + /* redraw the current line - this is an undocumented function. It invokes the + * redraw-current-line command. + */ + rl_refresh_line(0, 0); +} + +char * +get_prompt(void) +{ + /* The prompts can even be different lengths! */ + sprintf(prompt_buf, "%s", + prompt ? "Hit ctrl-t to toggle prompt> " : "Pretty cool huh?> "); + return prompt_buf; +} diff --git a/readline/readline/examples/fileman.c b/readline/readline/examples/fileman.c new file mode 100644 index 0000000000..c821df033a --- /dev/null +++ b/readline/readline/examples/fileman.c @@ -0,0 +1,506 @@ +/* fileman.c - file manager example for readline library. */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +/* fileman.c -- A tiny application which demonstrates how to use the + GNU Readline library. This application interactively allows users + to manipulate files and their modes. */ + +#ifdef HAVE_CONFIG_H +# include +#endif + +#include +#ifdef HAVE_SYS_FILE_H +# include +#endif +#include + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include +#include +#include + +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +#ifdef HAVE_STDLIB_H +# include +#endif + +#include + +#ifdef READLINE_LIBRARY +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +extern char *xmalloc PARAMS((size_t)); + +void initialize_readline PARAMS((void)); +void too_dangerous PARAMS((char *)); + +int execute_line PARAMS((char *)); +int valid_argument PARAMS((char *, char *)); + +/* The names of functions that actually do the manipulation. */ +int com_list PARAMS((char *)); +int com_view PARAMS((char *)); +int com_rename PARAMS((char *)); +int com_stat PARAMS((char *)); +int com_pwd PARAMS((char *)); +int com_delete PARAMS((char *)); +int com_help PARAMS((char *)); +int com_cd PARAMS((char *)); +int com_quit PARAMS((char *)); + +/* A structure which contains information on the commands this program + can understand. */ + +typedef struct { + char *name; /* User printable name of the function. */ + rl_icpfunc_t *func; /* Function to call to do the job. */ + char *doc; /* Documentation for this function. */ +} COMMAND; + +COMMAND commands[] = { + { "cd", com_cd, "Change to directory DIR" }, + { "delete", com_delete, "Delete FILE" }, + { "help", com_help, "Display this text" }, + { "?", com_help, "Synonym for `help'" }, + { "list", com_list, "List files in DIR" }, + { "ls", com_list, "Synonym for `list'" }, + { "pwd", com_pwd, "Print the current working directory" }, + { "quit", com_quit, "Quit using Fileman" }, + { "rename", com_rename, "Rename FILE to NEWNAME" }, + { "stat", com_stat, "Print out statistics on FILE" }, + { "view", com_view, "View the contents of FILE" }, + { (char *)NULL, (rl_icpfunc_t *)NULL, (char *)NULL } +}; + +/* Forward declarations. */ +char *stripwhite (); +COMMAND *find_command (); + +/* The name of this program, as taken from argv[0]. */ +char *progname; + +/* When non-zero, this global means the user is done using this program. */ +int done; + +char * +dupstr (s) + char *s; +{ + char *r; + + r = xmalloc (strlen (s) + 1); + strcpy (r, s); + return (r); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *line, *s; + + progname = argv[0]; + + initialize_readline (); /* Bind our completer. */ + + /* Loop reading and executing lines until the user quits. */ + for ( ; done == 0; ) + { + line = readline ("FileMan: "); + + if (!line) + break; + + /* Remove leading and trailing whitespace from the line. + Then, if there is anything left, add it to the history list + and execute it. */ + s = stripwhite (line); + + if (*s) + { + add_history (s); + execute_line (s); + } + + free (line); + } + exit (0); +} + +/* Execute a command line. */ +int +execute_line (line) + char *line; +{ + register int i; + COMMAND *command; + char *word; + + /* Isolate the command word. */ + i = 0; + while (line[i] && whitespace (line[i])) + i++; + word = line + i; + + while (line[i] && !whitespace (line[i])) + i++; + + if (line[i]) + line[i++] = '\0'; + + command = find_command (word); + + if (!command) + { + fprintf (stderr, "%s: No such command for FileMan.\n", word); + return (-1); + } + + /* Get argument to command, if any. */ + while (whitespace (line[i])) + i++; + + word = line + i; + + /* Call the function. */ + return ((*(command->func)) (word)); +} + +/* Look up NAME as the name of a command, and return a pointer to that + command. Return a NULL pointer if NAME isn't a command name. */ +COMMAND * +find_command (name) + char *name; +{ + register int i; + + for (i = 0; commands[i].name; i++) + if (strcmp (name, commands[i].name) == 0) + return (&commands[i]); + + return ((COMMAND *)NULL); +} + +/* Strip whitespace from the start and end of STRING. Return a pointer + into STRING. */ +char * +stripwhite (string) + char *string; +{ + register char *s, *t; + + for (s = string; whitespace (*s); s++) + ; + + if (*s == 0) + return (s); + + t = s + strlen (s) - 1; + while (t > s && whitespace (*t)) + t--; + *++t = '\0'; + + return s; +} + +/* **************************************************************** */ +/* */ +/* Interface to Readline Completion */ +/* */ +/* **************************************************************** */ + +char *command_generator PARAMS((const char *, int)); +char **fileman_completion PARAMS((const char *, int, int)); + +/* Tell the GNU Readline library how to complete. We want to try to complete + on command names if this is the first word in the line, or on filenames + if not. */ +void +initialize_readline () +{ + /* Allow conditional parsing of the ~/.inputrc file. */ + rl_readline_name = "FileMan"; + + /* Tell the completer that we want a crack first. */ + rl_attempted_completion_function = fileman_completion; +} + +/* Attempt to complete on the contents of TEXT. START and END bound the + region of rl_line_buffer that contains the word to complete. TEXT is + the word to complete. We can use the entire contents of rl_line_buffer + in case we want to do some simple parsing. Return the array of matches, + or NULL if there aren't any. */ +char ** +fileman_completion (text, start, end) + const char *text; + int start, end; +{ + char **matches; + + matches = (char **)NULL; + + /* If this word is at the start of the line, then it is a command + to complete. Otherwise it is the name of a file in the current + directory. */ + if (start == 0) + matches = rl_completion_matches (text, command_generator); + + return (matches); +} + +/* Generator function for command completion. STATE lets us know whether + to start from scratch; without any state (i.e. STATE == 0), then we + start at the top of the list. */ +char * +command_generator (text, state) + const char *text; + int state; +{ + static int list_index, len; + char *name; + + /* If this is a new word to complete, initialize now. This includes + saving the length of TEXT for efficiency, and initializing the index + variable to 0. */ + if (!state) + { + list_index = 0; + len = strlen (text); + } + + /* Return the next name which partially matches from the command list. */ + while (name = commands[list_index].name) + { + list_index++; + + if (strncmp (name, text, len) == 0) + return (dupstr(name)); + } + + /* If no names matched, then return NULL. */ + return ((char *)NULL); +} + +/* **************************************************************** */ +/* */ +/* FileMan Commands */ +/* */ +/* **************************************************************** */ + +/* String to pass to system (). This is for the LIST, VIEW and RENAME + commands. */ +static char syscom[1024]; + +/* List the file(s) named in arg. */ +int +com_list (arg) + char *arg; +{ + if (!arg) + arg = ""; + + sprintf (syscom, "ls -FClg %s", arg); + return (system (syscom)); +} + +int +com_view (arg) + char *arg; +{ + if (!valid_argument ("view", arg)) + return 1; + +#if defined (__MSDOS__) + /* more.com doesn't grok slashes in pathnames */ + sprintf (syscom, "less %s", arg); +#else + sprintf (syscom, "more %s", arg); +#endif + return (system (syscom)); +} + +int +com_rename (arg) + char *arg; +{ + too_dangerous ("rename"); + return (1); +} + +int +com_stat (arg) + char *arg; +{ + struct stat finfo; + + if (!valid_argument ("stat", arg)) + return (1); + + if (stat (arg, &finfo) == -1) + { + perror (arg); + return (1); + } + + printf ("Statistics for `%s':\n", arg); + + printf ("%s has %d link%s, and is %d byte%s in length.\n", + arg, + finfo.st_nlink, + (finfo.st_nlink == 1) ? "" : "s", + finfo.st_size, + (finfo.st_size == 1) ? "" : "s"); + printf ("Inode Last Change at: %s", ctime (&finfo.st_ctime)); + printf (" Last access at: %s", ctime (&finfo.st_atime)); + printf (" Last modified at: %s", ctime (&finfo.st_mtime)); + return (0); +} + +int +com_delete (arg) + char *arg; +{ + too_dangerous ("delete"); + return (1); +} + +/* Print out help for ARG, or for all of the commands if ARG is + not present. */ +int +com_help (arg) + char *arg; +{ + register int i; + int printed = 0; + + for (i = 0; commands[i].name; i++) + { + if (!*arg || (strcmp (arg, commands[i].name) == 0)) + { + printf ("%s\t\t%s.\n", commands[i].name, commands[i].doc); + printed++; + } + } + + if (!printed) + { + printf ("No commands match `%s'. Possibilties are:\n", arg); + + for (i = 0; commands[i].name; i++) + { + /* Print in six columns. */ + if (printed == 6) + { + printed = 0; + printf ("\n"); + } + + printf ("%s\t", commands[i].name); + printed++; + } + + if (printed) + printf ("\n"); + } + return (0); +} + +/* Change to the directory ARG. */ +int +com_cd (arg) + char *arg; +{ + if (chdir (arg) == -1) + { + perror (arg); + return 1; + } + + com_pwd (""); + return (0); +} + +/* Print out the current working directory. */ +int +com_pwd (ignore) + char *ignore; +{ + char dir[1024], *s; + + s = getcwd (dir, sizeof(dir) - 1); + if (s == 0) + { + printf ("Error getting pwd: %s\n", dir); + return 1; + } + + printf ("Current directory is %s\n", dir); + return 0; +} + +/* The user wishes to quit using this program. Just set DONE non-zero. */ +int +com_quit (arg) + char *arg; +{ + done = 1; + return (0); +} + +/* Function which tells you that you can't do this. */ +void +too_dangerous (caller) + char *caller; +{ + fprintf (stderr, + "%s: Too dangerous for me to distribute. Write it yourself.\n", + caller); +} + +/* Return non-zero if ARG is a valid argument for CALLER, else print + an error message and return zero. */ +int +valid_argument (caller, arg) + char *caller, *arg; +{ + if (!arg || !*arg) + { + fprintf (stderr, "%s: Argument required.\n", caller); + return (0); + } + + return (1); +} diff --git a/readline/readline/examples/hist_erasedups.c b/readline/readline/examples/hist_erasedups.c new file mode 100644 index 0000000000..f820eba6aa --- /dev/null +++ b/readline/readline/examples/hist_erasedups.c @@ -0,0 +1,121 @@ +/* hist_erasedups -- remove all duplicate entries from history file */ + +/* Copyright (C) 2011 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ +#ifndef READLINE_LIBRARY +#define READLINE_LIBRARY 1 +#endif + +#include +#include +#include + +#ifdef READLINE_LIBRARY +# include "history.h" +#else +# include +#endif + +#include + +#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0) +#define STREQN(a, b, n) ((n == 0) ? (1) \ + : ((a)[0] == (b)[0] && strncmp(a, b, n) == 0)) + +int hist_erasedups (void); + +static void +usage() +{ + fprintf (stderr, "hist_erasedups: usage: hist_erasedups [-t] [filename]\n"); + exit (2); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *fn; + int r; + + while ((r = getopt (argc, argv, "t")) != -1) + { + switch (r) + { + case 't': + history_write_timestamps = 1; + break; + default: + usage (); + } + } + argv += optind; + argc -= optind; + + fn = argc ? argv[0] : getenv ("HISTFILE"); + if (fn == 0) + { + fprintf (stderr, "hist_erasedups: no history file\n"); + usage (); + } + + if ((r = read_history (fn)) != 0) + { + fprintf (stderr, "hist_erasedups: read_history: %s: %s\n", fn, strerror (r)); + exit (1); + } + + hist_erasedups (); + + if ((r = write_history (fn)) != 0) + { + fprintf (stderr, "hist_erasedups: write_history: %s: %s\n", fn, strerror (r)); + exit (1); + } + + exit (0); +} + +int +hist_erasedups () +{ + int r, n; + HIST_ENTRY *h, *temp; + + using_history (); + while (h = previous_history ()) + { + r = where_history (); + for (n = 0; n < r; n++) + { + temp = history_get (n+history_base); + if (STREQ (h->line, temp->line)) + { + remove_history (n); + r--; /* have to get one fewer now */ + n--; /* compensate for above increment */ + history_offset--; /* moving backwards in history list */ + } + } + } + using_history (); + + return r; +} diff --git a/readline/readline/examples/hist_purgecmd.c b/readline/readline/examples/hist_purgecmd.c new file mode 100644 index 0000000000..7992d810dd --- /dev/null +++ b/readline/readline/examples/hist_purgecmd.c @@ -0,0 +1,151 @@ +/* hist_purgecmd -- remove all instances of command or pattern from history + file */ + +/* Copyright (C) 2011 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ +#ifndef READLINE_LIBRARY +#define READLINE_LIBRARY 1 +#endif + +#include +#include +#include + +#include + +#ifdef READLINE_LIBRARY +# include "history.h" +#else +# include +#endif + +#include + +#define STREQ(a, b) ((a)[0] == (b)[0] && strcmp(a, b) == 0) +#define STREQN(a, b, n) ((n == 0) ? (1) \ + : ((a)[0] == (b)[0] && strncmp(a, b, n) == 0)) + +#define PURGE_REGEXP 0x01 + +int hist_purgecmd (char *, int); + +static void +usage() +{ + fprintf (stderr, "hist_purgecmd: usage: hist_purgecmd [-r] [-t] [-f filename] command-spec\n"); + exit (2); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *fn; + int r, flags; + + flags = 0; + fn = 0; + while ((r = getopt (argc, argv, "f:rt")) != -1) + { + switch (r) + { + case 'f': + fn = optarg; + break; + case 'r': + flags |= PURGE_REGEXP; + break; + case 't': + history_write_timestamps = 1; + break; + default: + usage (); + } + } + argv += optind; + argc -= optind; + + if (fn == 0) + fn = getenv ("HISTFILE"); + if (fn == 0) + { + fprintf (stderr, "hist_purgecmd: no history file\n"); + usage (); + } + + if ((r = read_history (fn)) != 0) + { + fprintf (stderr, "hist_purgecmd: read_history: %s: %s\n", fn, strerror (r)); + exit (1); + } + + for (r = 0; r < argc; r++) + hist_purgecmd (argv[r], flags); + + if ((r = write_history (fn)) != 0) + { + fprintf (stderr, "hist_purgecmd: write_history: %s: %s\n", fn, strerror (r)); + exit (1); + } + + exit (0); +} + +int +hist_purgecmd (cmd, flags) + char *cmd; + int flags; +{ + int r, n, rflags; + HIST_ENTRY *temp; + regex_t regex = { 0 }; + + if (flags & PURGE_REGEXP) + { + rflags = REG_EXTENDED|REG_NOSUB; + if (regcomp (®ex, cmd, rflags)) + { + fprintf (stderr, "hist_purgecmd: %s: invalid regular expression\n", cmd); + return -1; + } + } + + r = 0; + using_history (); + r = where_history (); + for (n = 0; n < r; n++) + { + temp = history_get (n+history_base); + if (((flags & PURGE_REGEXP) && (regexec (®ex, temp->line, 0, 0, 0) == 0)) || + ((flags & PURGE_REGEXP) == 0 && STREQ (temp->line, cmd))) + { + remove_history (n); + r--; /* have to get one fewer now */ + n--; /* compensate for above increment */ + history_offset--; /* moving backwards in history list */ + } + } + using_history (); + + if (flags & PURGE_REGEXP) + regfree (®ex); + + return r; +} diff --git a/readline/readline/examples/histexamp.c b/readline/readline/examples/histexamp.c new file mode 100644 index 0000000000..309d769b38 --- /dev/null +++ b/readline/readline/examples/histexamp.c @@ -0,0 +1,128 @@ +/* histexamp.c - history library example program. */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#include + +#ifdef READLINE_LIBRARY +# include "history.h" +#else +# include +#endif + +#include +#include +#include + +int +main (argc, argv) + int argc; + char **argv; +{ + char line[1024], *t; + int len, done; + + line[0] = 0; + done = 0; + + using_history (); + while (!done) + { + printf ("history$ "); + fflush (stdout); + t = fgets (line, sizeof (line) - 1, stdin); + if (t && *t) + { + len = strlen (t); + if (t[len - 1] == '\n') + t[len - 1] = '\0'; + } + + if (!t) + strcpy (line, "quit"); + + if (line[0]) + { + char *expansion; + int result; + + using_history (); + + result = history_expand (line, &expansion); + if (result) + fprintf (stderr, "%s\n", expansion); + + if (result < 0 || result == 2) + { + free (expansion); + continue; + } + + add_history (expansion); + strncpy (line, expansion, sizeof (line) - 1); + free (expansion); + } + + if (strcmp (line, "quit") == 0) + done = 1; + else if (strcmp (line, "save") == 0) + write_history ("history_file"); + else if (strcmp (line, "read") == 0) + read_history ("history_file"); + else if (strcmp (line, "list") == 0) + { + register HIST_ENTRY **the_list; + register int i; + time_t tt; + char timestr[128]; + + the_list = history_list (); + if (the_list) + for (i = 0; the_list[i]; i++) + { + tt = history_get_time (the_list[i]); + if (tt) + strftime (timestr, sizeof (timestr), "%a %R", localtime(&tt)); + else + strcpy (timestr, "??"); + printf ("%d: %s: %s\n", i + history_base, timestr, the_list[i]->line); + } + } + else if (strncmp (line, "delete", 6) == 0) + { + int which; + if ((sscanf (line + 6, "%d", &which)) == 1) + { + HIST_ENTRY *entry = remove_history (which); + if (!entry) + fprintf (stderr, "No such entry %d\n", which); + else + { + free (entry->line); + free (entry); + } + } + else + { + fprintf (stderr, "non-numeric arg given to `delete'\n"); + } + } + } +} diff --git a/readline/readline/examples/manexamp.c b/readline/readline/examples/manexamp.c new file mode 100644 index 0000000000..351c6285ed --- /dev/null +++ b/readline/readline/examples/manexamp.c @@ -0,0 +1,111 @@ +/* manexamp.c -- The examples which appear in the documentation are here. */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#include +#include + +/* **************************************************************** */ +/* */ +/* How to Emulate gets () */ +/* */ +/* **************************************************************** */ + +/* A static variable for holding the line. */ +static char *line_read = (char *)NULL; + +/* Read a string, and return a pointer to it. Returns NULL on EOF. */ +char * +rl_gets () +{ + /* If the buffer has already been allocated, return the memory + to the free pool. */ + if (line_read) + { + free (line_read); + line_read = (char *)NULL; + } + + /* Get a line from the user. */ + line_read = readline (""); + + /* If the line has any text in it, save it on the history. */ + if (line_read && *line_read) + add_history (line_read); + + return (line_read); +} + +/* **************************************************************** */ +/* */ +/* Writing a Function to be Called by Readline. */ +/* */ +/* **************************************************************** */ + +/* Invert the case of the COUNT following characters. */ +invert_case_line (count, key) + int count, key; +{ + register int start, end; + + start = rl_point; + + if (count < 0) + { + direction = -1; + count = -count; + } + else + direction = 1; + + /* Find the end of the range to modify. */ + end = start + (count * direction); + + /* Force it to be within range. */ + if (end > rl_end) + end = rl_end; + else if (end < 0) + end = -1; + + if (start > end) + { + int temp = start; + start = end; + end = temp; + } + + if (start == end) + return; + + /* Tell readline that we are modifying the line, so save the undo + information. */ + rl_modifying (start, end); + + for (; start != end; start += direction) + { + if (_rl_uppercase_p (rl_line_buffer[start])) + rl_line_buffer[start] = _rl_to_lower (rl_line_buffer[start]); + else if (_rl_lowercase_p (rl_line_buffer[start])) + rl_line_buffer[start] = _rl_to_upper (rl_line_buffer[start]); + } + + /* Move point to on top of the last character changed. */ + rl_point = end - direction; +} diff --git a/readline/readline/examples/readlinebuf.h b/readline/readline/examples/readlinebuf.h new file mode 100644 index 0000000000..c8f3a7b41e --- /dev/null +++ b/readline/readline/examples/readlinebuf.h @@ -0,0 +1,139 @@ +/******************************************************************************* + * $Revision: 1.2 $ + * $Date: 2001/09/11 06:19:36 $ + * $Author: vyzo $ + * + * Contents: A streambuf which uses the GNU readline library for line I/O + * (c) 2001 by Dimitris Vyzovitis [vyzo@media.mit.edu] + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the Free + * Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************************/ + +#ifndef _READLINEBUF_H_ +#define _READLINEBUF_H_ + +#include +#include +#include +#include +#include + +#include +#include + +#if (defined __GNUC__) && (__GNUC__ < 3) +#include +#else +#include +using std::streamsize; +using std::streambuf; +#endif + +class readlinebuf : public streambuf { +public: +#if (defined __GNUC__) && (__GNUC__ < 3) + typedef char char_type; + typedef int int_type; + typedef streampos pos_type; + typedef streamoff off_type; +#endif + static const int_type eof = EOF; // this is -1 + static const int_type not_eof = 0; + +private: + const char* prompt_; + bool history_; + char* line_; + int low_; + int high_; + +protected: + + virtual int_type showmanyc() const { return high_ - low_; } + + virtual streamsize xsgetn( char_type* buf, streamsize n ) { + int rd = n > (high_ - low_)? (high_ - low_) : n; + memcpy( buf, line_, rd ); + low_ += rd; + + if ( rd < n ) { + low_ = high_ = 0; + free( line_ ); // free( NULL ) is a noop + line_ = readline( prompt_ ); + if ( line_ ) { + high_ = strlen( line_ ); + if ( history_ && high_ ) add_history( line_ ); + rd += xsgetn( buf + rd, n - rd ); + } + } + + return rd; + } + + virtual int_type underflow() { + if ( high_ == low_ ) { + low_ = high_ = 0; + free( line_ ); // free( NULL ) is a noop + line_ = readline( prompt_ ); + if ( line_ ) { + high_ = strlen( line_ ); + if ( history_ && high_ ) add_history( line_ ); + } + } + + if ( low_ < high_ ) return line_[low_]; + else return eof; + } + + virtual int_type uflow() { + int_type c = underflow(); + if ( c != eof ) ++low_; + return c; + } + + virtual int_type pbackfail( int_type c = eof ) { + if ( low_ > 0 ) --low_; + else if ( c != eof ) { + if ( high_ > 0 ) { + char* nl = (char*)realloc( line_, high_ + 1 ); + if ( nl ) { + line_ = (char*)memcpy( nl + 1, line_, high_ ); + high_ += 1; + line_[0] = char( c ); + } else return eof; + } else { + assert( !line_ ); + line_ = (char*)malloc( sizeof( char ) ); + *line_ = char( c ); + high_ = 1; + } + } else return eof; + + return not_eof; + } + +public: + readlinebuf( const char* prompt = NULL, bool history = true ) + : prompt_( prompt ), history_( history ), + line_( NULL ), low_( 0 ), high_( 0 ) { + setbuf( 0, 0 ); + } + + +}; + +#endif diff --git a/readline/readline/examples/rl-callbacktest.c b/readline/readline/examples/rl-callbacktest.c new file mode 100644 index 0000000000..3525ffd999 --- /dev/null +++ b/readline/readline/examples/rl-callbacktest.c @@ -0,0 +1,115 @@ +/* Standard include files. stdio.h is required. */ +#include +#include +#include +#include + +/* Used for select(2) */ +#include +#include + +#include + +#include +#include + +/* Standard readline include files. */ +#if defined (READLINE_LIBRARY) +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +extern int errno; + +static void cb_linehandler (char *); +static void signandler (int); + +int running, sigwinch_received; +const char *prompt = "rltest$ "; + +/* Handle SIGWINCH and window size changes when readline is not active and + reading a character. */ +static void +sighandler (int sig) +{ + sigwinch_received = 1; +} + +/* Callback function called for each line when accept-line executed, EOF + seen, or EOF character read. This sets a flag and returns; it could + also call exit(3). */ +static void +cb_linehandler (char *line) +{ + /* Can use ^D (stty eof) or `exit' to exit. */ + if (line == NULL || strcmp (line, "exit") == 0) + { + if (line == 0) + printf ("\n"); + printf ("exit\n"); + /* This function needs to be called to reset the terminal settings, + and calling it from the line handler keeps one extra prompt from + being displayed. */ + rl_callback_handler_remove (); + + running = 0; + } + else + { + if (*line) + add_history (line); + printf ("input line: %s\n", line); + free (line); + } +} + +int +main (int c, char **v) +{ + fd_set fds; + int r; + + + setlocale (LC_ALL, ""); + + /* Handle SIGWINCH */ + signal (SIGWINCH, sighandler); + + /* Install the line handler. */ + rl_callback_handler_install (prompt, cb_linehandler); + + /* Enter a simple event loop. This waits until something is available + to read on readline's input stream (defaults to standard input) and + calls the builtin character read callback to read it. It does not + have to modify the user's terminal settings. */ + running = 1; + while (running) + { + FD_ZERO (&fds); + FD_SET (fileno (rl_instream), &fds); + + r = select (FD_SETSIZE, &fds, NULL, NULL, NULL); + if (r < 0 && errno != EINTR) + { + perror ("rltest: select"); + rl_callback_handler_remove (); + break; + } + if (sigwinch_received) + { + rl_resize_terminal (); + sigwinch_received = 0; + } + if (r < 0) + continue; + + if (FD_ISSET (fileno (rl_instream), &fds)) + rl_callback_read_char (); + } + + printf ("rltest: Event loop has exited\n"); + return 0; +} diff --git a/readline/readline/examples/rl-fgets.c b/readline/readline/examples/rl-fgets.c new file mode 100644 index 0000000000..5512b94ab2 --- /dev/null +++ b/readline/readline/examples/rl-fgets.c @@ -0,0 +1,374 @@ +/* +Date: Tue, 16 Mar 2004 19:38:40 -0800 +From: Harold Levy +Subject: fgets(stdin) --> readline() redirector +To: chet@po.cwru.edu + +Hi Chet, + +Here is something you may find useful enough to include in the readline +distribution. It is a shared library that redirects calls to fgets(stdin) +to readline() via LD_PRELOAD, and it supports a custom prompt and list of +command names. Many people have asked me for this file, so I thought I'd +pass it your way in hope of just including it with readline to begin with. + +Best Regards, + +-Harold +*/ + +/****************************************************************************** +******************************************************************************* + + FILE NAME: fgets.c TARGET: libfgets.so + AUTHOR: Harold Levy VERSION: 1.0 + hlevy@synopsys.com + + ABSTRACT: Customize fgets() behavior via LD_PRELOAD in the following ways: + + -- If fgets(stdin) is called, redirect to GNU readline() to obtain + command-line editing, file-name completion, history, etc. + + -- A list of commands for command-name completion can be configured by + setting the environment-variable FGETS_COMMAND_FILE to a file containing + the list of commands to be used. + + -- Command-line editing with readline() works best when the prompt string + is known; you can set this with the FGETS_PROMPT environment variable. + + -- There special strings that libfgets will interpret as internal commands: + + _fgets_reset_ reset the command list + + _fgets_dump_ dump status + + _fgets_debug_ toggle debug messages + + HOW TO BUILD: Here are examples of how to build libfgets.so on various + platforms; you will have to add -I and -L flags to configure access to + the readline header and library files. + + (32-bit builds with gcc) + AIX: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lreadline -ltermcap + HP-UX: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldld -lreadline + Linux: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lreadline + SunOS: gcc -fPIC fgets.c -shared -o libfgets.so -lc -ldl -lgen -lreadline + + (64-bit builds without gcc) + SunOS: SUNWspro/bin/cc -D_LARGEFILE64_SOURCE=1 -xtarget=ultra -xarch=v9 \ + -KPIC fgets.c -Bdynamic -lc -ldl -lgen -ltermcap -lreadline + + HOW TO USE: Different operating systems have different levels of support + for the LD_PRELOAD concept. The generic method for 32-bit platforms is to + put libtermcap.so, libfgets.so, and libreadline.so (with absolute paths) + in the LD_PRELOAD environment variable, and to put their parent directories + in the LD_LIBRARY_PATH environment variable. Unfortunately there is no + generic method for 64-bit platforms; e.g. for 64-bit SunOS, you would have + to build both 32-bit and 64-bit libfgets and libreadline libraries, and + use the LD_FLAGS_32 and LD_FLAGS_64 environment variables with preload and + library_path configurations (a mix of 32-bit and 64-bit calls are made under + 64-bit SunOS). + + EXAMPLE WRAPPER: Here is an example shell script wrapper around the + program "foo" that uses fgets() for command-line input: + + #!/bin/csh + #### replace this with the libtermcap.so directory: + set dir1 = "/usr/lib" + #### replace this with the libfgets.so directory: + set dir2 = "/usr/fgets" + #### replace this with the libreadline.so directory: + set dir3 = "/usr/local/lib" + set lib1 = "${dir1}/libtermcap.so" + set lib2 = "${dir2}/libfgets.so" + set lib3 = "${dir3}/libreadline.so" + if ( "${?LD_PRELOAD}" ) then + setenv LD_PRELOAD "${lib1}:${lib2}:${lib3}:${LD_PRELOAD}" + else + setenv LD_PRELOAD "${lib1}:${lib2}:${lib3}" + endif + if ( "${?LD_LIBRARY_PATH}" ) then + setenv LD_LIBRARY_PATH "${dir1}:${dir2}:${dir3}:${LD_LIBRARY_PATH}" + else + setenv LD_LIBRARY_PATH "${dir1}:${dir2}:${dir3}" + endif + setenv FGETS_COMMAND_FILE "${dir2}/foo.commands" + setenv FGETS_PROMPT "foo> " + exec "foo" $* + + Copyright (C)©2003-2004 Harold Levy. + + This code links to the GNU readline library, and as such is bound by the + terms of the GNU General Public License as published by the Free Software + Foundation, either version 2 or (at your option) any later version. + + The GNU General Public License is often shipped with GNU software, and is + generally kept in a file called COPYING or LICENSE. If you do not have a + copy of the license, write to the Free Software Foundation, 59 Temple Place, + Suite 330, Boston, MA 02111 USA. + + This program is distributed in the hope that it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS + FOR A PARTICULAR PURPOSE. See the GNU General Public License for more + details. + +******************************************************************************* +******************************************************************************/ + + + +#include +#include +#include +#include +#include + +#include +#include + + + +/* for dynamically connecting to the native fgets() */ +#if defined(RTLD_NEXT) +#define REAL_LIBC RTLD_NEXT +#else +#define REAL_LIBC ((void *) -1L) +#endif +typedef char * ( * fgets_t ) ( char * s, int n, FILE * stream ) ; + + + +/* private data */ +/* -- writeable data is stored in the shared library's data segment + -- every process that uses the shared library gets a private memory copy of + its entire data segment + -- static data in the shared library is not copied to the application + -- only read-only (i.e. 'const') data is stored in the shared library's + text segment +*/ +static char ** my_fgets_names = NULL ; +static int my_fgets_number_of_names = 0 ; +static int my_fgets_debug_flag = 0 ; + + + +/* invoked with _fgets_reset_ */ +static void +my_fgets_reset ( + void +) { + if ( my_fgets_names && (my_fgets_number_of_names > 0) ) { + int i ; + if ( my_fgets_debug_flag ) { + printf ( "libfgets: removing command list\n" ) ; + } + for ( i = 0 ; i < my_fgets_number_of_names ; i ++ ) { + if ( my_fgets_names[i] ) free ( my_fgets_names[i] ) ; + } + free ( my_fgets_names ) ; + } + my_fgets_names = NULL ; + my_fgets_number_of_names = 0 ; +} + + + +/* invoked with _fgets_dump_ */ +static void +my_fgets_dump ( + void +) { + char * s ; + printf ( "\n" ) ; + s = getenv ( "FGETS_PROMPT" ) ; + printf ( "FGETS_PROMPT = %s\n", s ? s : "" ) ; + s = getenv ( "FGETS_COMMAND_FILE" ) ; + printf ( "FGETS_COMMAND_FILE = %s\n", s ? s : "" ) ; + printf ( "debug flag = %d\n", my_fgets_debug_flag ) ; + printf ( "#commands = %d\n", my_fgets_number_of_names ) ; + if ( my_fgets_debug_flag ) { + if ( my_fgets_names && (my_fgets_number_of_names > 0) ) { + int i ; + for ( i = 0 ; i < my_fgets_number_of_names ; i ++ ) { + printf ( "%s\n", my_fgets_names[i] ) ; + } + } + } + printf ( "\n" ) ; +} + + + +/* invoked with _fgets_debug_ */ +static void +my_fgets_debug_toggle ( + void +) { + my_fgets_debug_flag = my_fgets_debug_flag ? 0 : 1 ; + if ( my_fgets_debug_flag ) { + printf ( "libfgets: debug flag = %d\n", my_fgets_debug_flag ) ; + } +} + + + +/* read the command list if needed, return the i-th name */ +static char * +my_fgets_lookup ( + int index +) { + if ( (! my_fgets_names) || (! my_fgets_number_of_names) ) { + char * fname ; + FILE * fp ; + fgets_t _fgets ; + int i ; + char buf1[256], buf2[256] ; + fname = getenv ( "FGETS_COMMAND_FILE" ) ; + if ( ! fname ) { + if ( my_fgets_debug_flag ) { + printf ( "libfgets: empty or unset FGETS_COMMAND_FILE\n" ) ; + } + return NULL ; + } + fp = fopen ( fname, "r" ) ; + if ( ! fp ) { + if ( my_fgets_debug_flag ) { + printf ( "libfgets: cannot open '%s' for reading\n", fname ) ; + } + return NULL ; + } + _fgets = (fgets_t) dlsym ( REAL_LIBC, "fgets" ) ; + if ( ! _fgets ) { + fprintf ( stderr, + "libfgets: failed to dynamically link to native fgets()\n" + ) ; + return NULL ; + } + for ( i = 0 ; _fgets(buf1,255,fp) ; i ++ ) ; + if ( ! i ) { fclose(fp) ; return NULL ; } + my_fgets_names = (char**) calloc ( i, sizeof(char*) ) ; + rewind ( fp ) ; + i = 0 ; + while ( _fgets(buf1,255,fp) ) { + buf1[255] = 0 ; + if ( 1 == sscanf(buf1,"%s",buf2) ) { + my_fgets_names[i] = strdup(buf2) ; + i ++ ; + } + } + fclose ( fp ) ; + my_fgets_number_of_names = i ; + if ( my_fgets_debug_flag ) { + printf ( "libfgets: successfully read %d commands\n", i ) ; + } + } + if ( index < my_fgets_number_of_names ) { + return my_fgets_names[index] ; + } else { + return NULL ; + } +} + + + +/* generate a list of partial name matches for readline() */ +static char * +my_fgets_generator ( + const char * text, + int state +) +{ + static int list_index, len ; + char * name ; + if ( ! state ) { + list_index = 0 ; + len = strlen ( text ) ; + } + while ( ( name = my_fgets_lookup(list_index) ) ) { + list_index ++ ; + if ( ! strncmp ( name, text, len ) ) { + return ( strdup ( name ) ) ; + } + } + return ( NULL ) ; +} + + + +/* partial name completion callback for readline() */ +static char ** +my_fgets_completion ( + const char * text, + int start, + int end +) +{ + char ** matches ; + matches = NULL ; + if ( ! start ) { + matches = rl_completion_matches ( text, my_fgets_generator ) ; + } + return ( matches ) ; +} + + + +/* fgets() intercept */ +char * +fgets ( + char * s, + int n, + FILE * stream +) +{ + if ( ! s ) return NULL ; + if ( stream == stdin ) { + char * prompt ; + char * my_fgets_line ; + rl_already_prompted = 1 ; + rl_attempted_completion_function = my_fgets_completion ; + rl_catch_signals = 1 ; + rl_catch_sigwinch = 1 ; + rl_set_signals () ; + prompt = getenv ( "FGETS_PROMPT" ) ; + for ( + my_fgets_line = 0 ; ! my_fgets_line ; my_fgets_line=readline(prompt) + ) ; + if ( ! strncmp(my_fgets_line, "_fgets_reset_", 13) ) { + my_fgets_reset () ; + free ( my_fgets_line ) ; + strcpy ( s, "\n" ) ; + return ( s ) ; + } + if ( ! strncmp(my_fgets_line, "_fgets_dump_", 12) ) { + my_fgets_dump () ; + free ( my_fgets_line ) ; + strcpy ( s, "\n" ) ; + return ( s ) ; + } + if ( ! strncmp(my_fgets_line, "_fgets_debug_", 13) ) { + my_fgets_debug_toggle () ; + free ( my_fgets_line ) ; + strcpy ( s, "\n" ) ; + return ( s ) ; + } + (void) strncpy ( s, my_fgets_line, n-1 ) ; + (void) strcat ( s, "\n" ) ; + if ( *my_fgets_line ) add_history ( my_fgets_line ) ; + free ( my_fgets_line ) ; + return ( s ) ; + } else { + static fgets_t _fgets ; + _fgets = (fgets_t) dlsym ( REAL_LIBC, "fgets" ) ; + if ( ! _fgets ) { + fprintf ( stderr, + "libfgets: failed to dynamically link to native fgets()\n" + ) ; + strcpy ( s, "\n" ) ; + return ( s ) ; + } + return ( + _fgets ( s, n, stream ) + ) ; + } +} diff --git a/readline/readline/examples/rl.c b/readline/readline/examples/rl.c new file mode 100644 index 0000000000..a5cf276cb9 --- /dev/null +++ b/readline/readline/examples/rl.c @@ -0,0 +1,158 @@ +/* + * rl - command-line interface to read a line from the standard input + * (or another fd) using readline. + * + * usage: rl [-p prompt] [-u unit] [-d default] [-n nchars] + */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include + +#ifdef HAVE_STDLIB_H +# include +#else +extern void exit(); +#endif + +#if defined (READLINE_LIBRARY) +# include "posixstat.h" +# include "readline.h" +# include "history.h" +#else +# include +# include +# include +#endif + +extern int optind; +extern char *optarg; + +#if !defined (strchr) && !defined (__STDC__) +extern char *strrchr(); +#endif + +static char *progname; +static char *deftext; + +static int +set_deftext () +{ + if (deftext) + { + rl_insert_text (deftext); + deftext = (char *)NULL; + rl_startup_hook = (rl_hook_func_t *)NULL; + } + return 0; +} + +static void +usage() +{ + fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default] [-n nchars]\n", + progname, progname); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *temp, *prompt; + struct stat sb; + int opt, fd, nch; + FILE *ifp; + + progname = strrchr(argv[0], '/'); + if (progname == 0) + progname = argv[0]; + else + progname++; + + /* defaults */ + prompt = "readline$ "; + fd = nch = 0; + deftext = (char *)0; + + while ((opt = getopt(argc, argv, "p:u:d:n:")) != EOF) + { + switch (opt) + { + case 'p': + prompt = optarg; + break; + case 'u': + fd = atoi(optarg); + if (fd < 0) + { + fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg); + exit (2); + } + break; + case 'd': + deftext = optarg; + break; + case 'n': + nch = atoi(optarg); + if (nch < 0) + { + fprintf (stderr, "%s: bad value for -n: `%s'\n", progname, optarg); + exit (2); + } + break; + default: + usage (); + exit (2); + } + } + + if (fd != 0) + { + if (fstat (fd, &sb) < 0) + { + fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd); + exit (1); + } + ifp = fdopen (fd, "r"); + rl_instream = ifp; + } + + if (deftext && *deftext) + rl_startup_hook = set_deftext; + + if (nch > 0) + rl_num_chars_to_read = nch; + + temp = readline (prompt); + + /* Test for EOF. */ + if (temp == 0) + exit (1); + + printf ("%s\n", temp); + exit (0); +} diff --git a/readline/readline/examples/rlbasic.c b/readline/readline/examples/rlbasic.c new file mode 100644 index 0000000000..6a9601f52a --- /dev/null +++ b/readline/readline/examples/rlbasic.c @@ -0,0 +1,29 @@ +#include +#include +#include +#include + +#if defined (READLINE_LIBRARY) +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +int +main (int c, char **v) +{ + char *input; + + for (;;) { + input = readline ((char *)NULL); + if (input == 0) + break; + printf ("%s\n", input); + if (strcmp (input, "exit") == 0) + break; + free (input); + } + exit (0); +} diff --git a/readline/readline/examples/rlcat.c b/readline/readline/examples/rlcat.c new file mode 100644 index 0000000000..b4942413f8 --- /dev/null +++ b/readline/readline/examples/rlcat.c @@ -0,0 +1,179 @@ +/* + * rlcat - cat(1) using readline + * + * usage: rlcat + */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#ifdef HAVE_UNISTD_H +# include +#endif + +#include +#include "posixstat.h" + +#include +#include +#include +#include + +#ifdef HAVE_STDLIB_H +# include +#else +extern void exit(); +#endif + +#ifndef errno +extern int errno; +#endif + +#if defined (READLINE_LIBRARY) +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +extern int optind; +extern char *optarg; + +static int stdcat(); + +static char *progname; +static int vflag; + +static void +usage() +{ + fprintf (stderr, "%s: usage: %s [-vEVN] [filename]\n", progname, progname); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *temp; + int opt, Vflag, Nflag; + + progname = strrchr(argv[0], '/'); + if (progname == 0) + progname = argv[0]; + else + progname++; + + vflag = Vflag = Nflag = 0; + while ((opt = getopt(argc, argv, "vEVN")) != EOF) + { + switch (opt) + { + case 'v': + vflag = 1; + break; + case 'V': + Vflag = 1; + break; + case 'E': + Vflag = 0; + break; + case 'N': + Nflag = 1; + break; + default: + usage (); + exit (2); + } + } + + argc -= optind; + argv += optind; + + if (isatty(0) == 0 || argc || Nflag) + return stdcat(argc, argv); + + rl_variable_bind ("editing-mode", Vflag ? "vi" : "emacs"); + while (temp = readline ("")) + { + if (*temp) + add_history (temp); + printf ("%s\n", temp); + } + + return (ferror (stdout)); +} + +static int +fcopy(fp) + FILE *fp; +{ + int c; + char *x; + + while ((c = getc(fp)) != EOF) + { + if (vflag && isascii ((unsigned char)c) && isprint((unsigned char)c) == 0) + { + x = rl_untranslate_keyseq (c); + if (fputs (x, stdout) == EOF) + return 1; + } + else if (putchar (c) == EOF) + return 1; + } + return (ferror (stdout)); +} + +int +stdcat (argc, argv) + int argc; + char **argv; +{ + int i, fd, r; + char *s; + FILE *fp; + + if (argc == 0) + return (fcopy(stdin)); + + for (i = 0, r = 1; i < argc; i++) + { + if (*argv[i] == '-' && argv[i][1] == 0) + fp = stdin; + else + { + fp = fopen (argv[i], "r"); + if (fp == 0) + { + fprintf (stderr, "%s: %s: cannot open: %s\n", progname, argv[i], strerror(errno)); + continue; + } + } + r = fcopy (fp); + if (fp != stdin) + fclose(fp); + } + return r; +} diff --git a/readline/readline/examples/rlevent.c b/readline/readline/examples/rlevent.c new file mode 100644 index 0000000000..8143cb02aa --- /dev/null +++ b/readline/readline/examples/rlevent.c @@ -0,0 +1,173 @@ +/* + * rl - command-line interface to read a line from the standard input + * (or another fd) using readline. + * + * usage: rl [-p prompt] [-u unit] [-d default] [-n nchars] + */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#ifdef HAVE_UNISTD_H +# include +#else +extern int getopt(); +extern int sleep(); +#endif + +#include +#include + +#ifdef HAVE_STDLIB_H +# include +#else +extern void exit(); +#endif + +#if defined (READLINE_LIBRARY) +# include "posixstat.h" +# include "readline.h" +# include "history.h" +#else +# include +# include +# include +#endif + +extern int optind; +extern char *optarg; + +#if !defined (strchr) && !defined (__STDC__) +extern char *strrchr(); +#endif + +static char *progname; +static char *deftext; + +static int +event_hook () +{ + fprintf (stderr, "ding!\n"); + sleep (1); + return 0; +} + +static int +set_deftext () +{ + if (deftext) + { + rl_insert_text (deftext); + deftext = (char *)NULL; + rl_startup_hook = (rl_hook_func_t *)NULL; + } + return 0; +} + +static void +usage() +{ + fprintf (stderr, "%s: usage: %s [-p prompt] [-u unit] [-d default] [-n nchars]\n", + progname, progname); +} + +int +main (argc, argv) + int argc; + char **argv; +{ + char *temp, *prompt; + struct stat sb; + int opt, fd, nch; + FILE *ifp; + + progname = strrchr(argv[0], '/'); + if (progname == 0) + progname = argv[0]; + else + progname++; + + /* defaults */ + prompt = "readline$ "; + fd = nch = 0; + deftext = (char *)0; + + while ((opt = getopt(argc, argv, "p:u:d:n:")) != EOF) + { + switch (opt) + { + case 'p': + prompt = optarg; + break; + case 'u': + fd = atoi(optarg); + if (fd < 0) + { + fprintf (stderr, "%s: bad file descriptor `%s'\n", progname, optarg); + exit (2); + } + break; + case 'd': + deftext = optarg; + break; + case 'n': + nch = atoi(optarg); + if (nch < 0) + { + fprintf (stderr, "%s: bad value for -n: `%s'\n", progname, optarg); + exit (2); + } + break; + default: + usage (); + exit (2); + } + } + + if (fd != 0) + { + if (fstat (fd, &sb) < 0) + { + fprintf (stderr, "%s: %d: bad file descriptor\n", progname, fd); + exit (1); + } + ifp = fdopen (fd, "r"); + rl_instream = ifp; + } + + if (deftext && *deftext) + rl_startup_hook = set_deftext; + + if (nch > 0) + rl_num_chars_to_read = nch; + + rl_event_hook = event_hook; + temp = readline (prompt); + + /* Test for EOF. */ + if (temp == 0) + exit (1); + + printf ("%s\n", temp); + exit (0); +} diff --git a/readline/readline/examples/rlfe/ChangeLog b/readline/readline/examples/rlfe/ChangeLog new file mode 100644 index 0000000000..b752ce1a04 --- /dev/null +++ b/readline/readline/examples/rlfe/ChangeLog @@ -0,0 +1,37 @@ +2019-10-23 Per Bothner + + * pty.c: Import from screen-4.0.2. + * configure.in, Makefile.in, config.h.in: Set up autoconf handling, + copying a bunk of stuff over from screen. + * rlfe.c: Use OpenPTY from pty.c instead of get_master_pty. + +2004-11-03 Per Bothner + + * rlfe.c: Get input emphasis (boldening) more robust. + + * rlfe.c: Various cleanups on comments and names. + +2003-11-07 Wolfgang Taeuber + + * Specify a history file and the size of the history file with command + * line options; use EDITOR/VISUAL to set vi/emacs preference. + +1999-09-03 Chet Ramey + + * fep.c: Memmove is not universally available. This patch assumes + that an autoconf test has been performed, and that memcpy is + available without checking. + + * fep.c: VDISCARD is not universally available, even when termios is. + + * fep.c: If a system doesn't have TIOCSCTTY, the first `open' + performed after setsid allocates a controlling terminal. The + original code would leave the child process running on the slave pty + without a controlling tty if TIOCSCTTY was not available. + + * fep.c: Most versions of SVR4, including solaris, don't allow + terminal ioctl calls on the master side of the pty. + +1999-08-28 Per Bothner + + * fep.c: Initial release. diff --git a/readline/readline/examples/rlfe/ChangeLog.gdb b/readline/readline/examples/rlfe/ChangeLog.gdb new file mode 100644 index 0000000000..5b01021296 --- /dev/null +++ b/readline/readline/examples/rlfe/ChangeLog.gdb @@ -0,0 +1,14 @@ +2019-10-23 Jan Kratochvil + + Imported readline 6.2, and upstream patch 001. + +2009-08-22 Ralf Wildenhues + + * configure: Regenerate. + + * configure.in: m4_include toplevel config/override.m4. + * configure: Regenerate. + +2009-07-30 Ralf Wildenhues + + * configure.in: Correctly quote AC_PROGRAM_SOURCE definition. diff --git a/readline/readline/examples/rlfe/Makefile.in b/readline/readline/examples/rlfe/Makefile.in new file mode 100644 index 0000000000..7d6fd53a20 --- /dev/null +++ b/readline/readline/examples/rlfe/Makefile.in @@ -0,0 +1,184 @@ +# +# Makefile template for rlfe +# +# See machine dependant config.h for more configuration options. +# + +srcdir = @srcdir@ +VPATH = @srcdir@ + +DESTDIR = + +# Where to install screen. + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +# don't forget to change mandir and infodir in doc/Makefile. +bindir = $(exec_prefix)/bin + +VERSION = @VERSION@ +SCREEN = screen-$(VERSION) + +CC = @CC@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +#LDFLAGS = -L$(READLINE_DIR) +LDFLAGS = @LDFLAGS@ +LIBS = -lreadline -lhistory @LIBS@ + +CPP=@CPP@ +CPP_DEPEND=$(CC) -MM + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +AWK = @AWK@ + +OPTIONS= +#OPTIONS= -DDEBUG + +SHELL=/bin/sh + +CFILES= rlfe.c pty.c +HFILES= extern.h os.h screen.h +EXTRA_DIST=configure.in configure Makefile.in config.h.in ChangeLog README +OFILES= rlfe.o pty.o + +all: rlfe + +rlfe: $(OFILES) + $(CC) $(LDFLAGS) -o $@ $(OFILES) $(LIBS) + +rlfe-$(VERSION).tar.gz: + tar czf $@ $(CFILES) $(HFILES) $(EXTRA_DIST) + +.c.o: + $(CC) -c -I. -I$(srcdir) $(CPPFLAGS) $(M_CFLAGS) $(DEFS) $(OPTIONS) $(CFLAGS) $< + +install_bin: .version screen + -if [ -f $(DESTDIR)$(bindir)/$(SCREEN) ] && [ ! -f $(DESTDIR)$(bindir)/$(SCREEN).old ]; \ + then mv $(DESTDIR)$(bindir)/$(SCREEN) $(DESTDIR)$(bindir)/$(SCREEN).old; fi + $(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN) + -chown root $(DESTDIR)$(bindir)/$(SCREEN) && chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN) +# This doesn't work if $(bindir)/screen is a symlink + -if [ -f $(DESTDIR)$(bindir)/screen ] && [ ! -f $(DESTDIR)$(bindir)/screen.old ]; then mv $(DESTDIR)$(bindir)/screen $(DESTDIR)$(bindir)/screen.old; fi + rm -f $(DESTDIR)$(bindir)/screen + (cd $(DESTDIR)$(bindir) && ln -sf $(SCREEN) screen) + cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS) + +uninstall: .version + rm -f $(DESTDIR)$(bindir)/$(SCREEN) + rm -f $(DESTDIR)$(bindir)/screen + -mv $(DESTDIR)$(bindir)/screen.old $(DESTDIR)$(bindir)/screen + rm -f $(DESTDIR)$(ETCSCREENRC) + cd doc; $(MAKE) uninstall + +shadow: + mkdir shadow; + cd shadow; ln -s ../*.[ch] ../*.in ../*.sh ../configure ../doc ../terminfo ../etc . + rm -f shadow/term.h shadow/tty.c shadow/comm.h shadow/osdef.h + echo "install all Makefiles and config:" > shadow/Makefile + echo " rm -f config.cache" >> shadow/Makefile + echo " sh ./configure" >> shadow/Makefile + +term.h: term.c term.sh + AWK=$(AWK) srcdir=$(srcdir) sh $(srcdir)/term.sh + +kmapdef.c: term.h + +tty.c: tty.sh + sh $(srcdir)/tty.sh tty.c + +mostlyclean: + rm -f $(OFILES) rlfe *.o + +clean celan: mostlyclean + rm -f tty.c term.h comm.h osdef.h kmapdef.c core + +# Delete all files from the current directory that are created by +# configuring or building the program. +# building of term.h/comm.h requires awk. Keep it in the distribution +# we keep config.h, as this file knows where 'make dist' finds the ETCSCREENRC. +#distclean: mostlyclean +# rm -f $(SCREEN).tar $(SCREEN).tar.gz +# rm -f config.status Makefile +# rm -f osdef.h doc/Makefile + +maintainer-clean: + @echo "This command is not even intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + + +# Delete everything from the current directory that can be +# reconstructed with this Makefile. +realclean: .version mostlyclean + rm -f $(SCREEN).tar $(SCREEN).tar.gz + rm -f config.status Makefile doc/Makefile + rm -f tty.c term.h comm.h osdef.h kmapdef.c + rm -f config.h + echo "install all Makefiles and config:" > Makefile + echo " sh ./configure" >> Makefile + +tags TAGS: $(CFILES) + -ctags *.sh $(CFILES) *.h + -ctags -e *.sh $(CFILES) *.h + +dist: .version $(SCREEN).tar.gz + + +# Perform self-tests (if any). +check: + +config: + rm -f config.cache + sh ./configure + + +############################################################################### + +.version: + @rev=`sed < $(srcdir)/patchlevel.h -n -e '/#define REV/s/#define REV *//p'`; \ + vers=`sed < $(srcdir)/patchlevel.h -n -e '/#define VERS/s/#define VERS *//p'`; \ + pat=`sed < $(srcdir)/patchlevel.h -n -e '/#define PATCHLEVEL/s/#define PATCHLEVEL *//p'`; \ + if [ "$${rev}.$${vers}.$${pat}" != "$(VERSION)" ]; then \ + echo "This distribution is screen-$${rev}.$${vers}.$${pat}, but"; \ + echo "the Makefile is from $(VERSION). Please update!"; exit 1; fi + +############################################################################### + +mdepend: $(CFILES) term.h + @rm -f DEPEND ; \ + for i in ${CFILES} ; do \ + echo "$$i" ; \ + echo `echo "$$i" | sed -e 's/.c$$/.o/'`": $$i" `\ + cc -E $$i |\ + grep '^# .*"\./.*\.h"' |\ + (sort -t'"' -u -k 2,2 2>/dev/null || sort -t'"' -u +1 -2) |\ + sed -e 's/.*"\.\/\(.*\)".*/\1/'\ + ` >> DEPEND ; \ + done + +depend: depend.in + ./config.status || ./configure + +depend.in: $(CFILES) term.h + cp Makefile.in Makefile.in~ + sed -e '/\#\#\# Dependencies/q' < Makefile.in > tmp_make + for i in $(CFILES); do echo $$i; $(CPP_DEPEND) $$i >> tmp_make; done + mv tmp_make Makefile.in + +Makefile makefile: config.status $(srcdir)/Makefile.in + CONFIG_FILES=Makefile CONFIG_HEADERS= $(SHELL) ./config.status + +config.status: $(srcdir)/configure + $(SHELL) ./config.status --recheck + +$(srcdir)/configure: $(srcdir)/configure.in + cd $(srcdir) && autoconf + +############################################################################### + +### Dependencies: +pty.o: pty.c config.h diff --git a/readline/readline/examples/rlfe/README b/readline/readline/examples/rlfe/README new file mode 100644 index 0000000000..9e1f689dc9 --- /dev/null +++ b/readline/readline/examples/rlfe/README @@ -0,0 +1,78 @@ +rlfe (ReadLine Front-End) is a "universal wrapper" around readline. +You specify an interactive program to run (typically a shell), and +readline is used to edit input lines. + +There are other such front-ends; what distinguishes this one is that +it monitors the state of the inferior pty, and if the inferior program +switches its terminal to raw mode, then rlfe passes your characters +through directly. This basically means you can run your entire +session (including bash and terminal-mode emacs) under rlfe. + +FEATURES + +* Can use all readline commands (and history) in commands that +read input lines in "canonical mode" - even 'cat'! + +* Automatically switches between "readline-editing mode" and "raw mode" +depending on the terminal mode. If the inferior program invokes +readline itself, it will do its own line editing. (The inferior +readline will not know about rlfe, and it will have its own history.) +You can even run programs like 'emavs -nw' and 'vi' under rlfe. +The goal is you could leave rlfe always on without even knowing +about it. (We're not quite there, but it works tolerably well.) + +* The input line (after any prompt) is changed to bold-face. + +INSTALL + +The usual: ./configure && make && make install + +Note so far rlfe has only been tested on GNU Linux (Fedora Core 2) +and Mac OS X (10.3). + +This assumes readline header files and libraries are in the default +places. If not, you can create a link named readline pointing to the +readline sources. To link with libreadline.a and libhistory.a +you can copy or link them, or add LDFLAGS='-/path/to/readline' to +the make command-line. + +USAGE + +Just run it. That by default runs bash. You can run some other +command by giving it as command-line arguments. + +There are a few tweaks: -h allows you to name the history file, +and -s allows you to specify its size. It default to "emacs" mode, +but if the the environment variable EDITOR is set to "vi" that +mode is chosen. + +ISSUES + +* The mode switching depends on the terminal mode set by the inferior +program. Thus ssh/telnet/screen-type programs will typically be in +raw mode, so rlfe won't be much use, even if remote programs run in +canonical mode. The work-around is to run rlfe on the remote end. + +* Echo supression and prompt recognition are somewhat fragile. +(A protocol so that the o/s tty code can reliably communicate its +state to rlfe could solve this problem, and the previous one.) + +* See the intro to rlfe.c for more notes. + +* Assumes a VT100-compatible terminal, though that could be generalized +if anybody cares. + +* Requires ncurses. + +* It would be useful to integrate rlfe's logic in a terminal emulator. +That would make it easier to reposition the edit position with a mouse, +integrate cut-and-paste with the system clipboard, and more robustly +handle escape sequence and multi-byte characters more robustly. + +AUTHOR + +Per Bothner + +LICENSE + +GPL. diff --git a/readline/readline/examples/rlfe/config.h.in b/readline/readline/examples/rlfe/config.h.in new file mode 100644 index 0000000000..a843fecc4a --- /dev/null +++ b/readline/readline/examples/rlfe/config.h.in @@ -0,0 +1,383 @@ +/* Copyright 2004 Per Bothner + * Based on config.h from screen-4.0.2. + * Copyright (c) 1993-2000 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + **************************************************************** + * $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU + */ + + + + + +/********************************************************************** + * + * User Configuration Section + */ + + +/* + * define PTYMODE if you do not like the default of 0622, which allows + * public write to your pty. + * define PTYGROUP to some numerical group-id if you do not want the + * tty to be in "your" group. + * Note, screen is unable to change mode or group of the pty if it + * is not installed with sufficient privilege. (e.g. set-uid-root) + * define PTYROFS if the /dev/pty devices are mounted on a read-only + * filesystem so screen should not even attempt to set mode or group + * even if running as root (e.g. on TiVo). + */ +#undef PTYMODE +#undef PTYGROUP +#undef PTYROFS + +/* + * If screen is NOT installed set-uid root, screen can provide tty + * security by exclusively locking the ptys. While this keeps other + * users from opening your ptys, it also keeps your own subprocesses + * from being able to open /dev/tty. Define LOCKPTY to add this + * exclusive locking. + */ +#undef LOCKPTY + + +/********************************************************************** + * + * End of User Configuration Section + * + * Rest of this file is modified by 'configure' + * Change at your own risk! + * + */ + +/* + * Some defines to identify special unix variants + */ +#ifndef SVR4 +#undef SVR4 +#endif + +#ifndef _POSIX_SOURCE +#undef _POSIX_SOURCE +#endif + +/* + * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX). + */ +#undef POSIX + +/* + * Define TERMIO if you have struct termio instead of struct sgttyb. + * This is usually the case for SVID systems, where BSD uses sgttyb. + * POSIX systems should define this anyway, even though they use + * struct termios. + */ +#undef TERMIO + +/* + * Define CYTERMIO if you have cyrillic termio modes. + */ +#undef CYTERMIO + +/* + * Define TERMINFO if your machine emulates the termcap routines + * with the terminfo database. + * Thus the .screenrc file is parsed for + * the command 'terminfo' and not 'termcap'. + */ +#undef TERMINFO + +/* + * If your library does not define ospeed, define this. + */ +#undef NEED_OSPEED + +/* + * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX) + */ +#ifndef SYSV +#undef SYSV +#endif + +/* + * Define SIGVOID if your signal handlers return void. On older + * systems, signal returns int, but on newer ones, it returns void. + */ +#undef SIGVOID + +/* + * Define USESIGSET if you have sigset for BSD 4.1 reliable signals. + */ +#undef USESIGSET + +/* + * Define SYSVSIGS if signal handlers must be reinstalled after + * they have been called. + */ +#undef SYSVSIGS + +/* + * Define BSDWAIT if your system defines a 'union wait' in + * + * Only allow BSDWAIT i.e. wait3 on nonposix systems, since + * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl + * + */ +#ifndef POSIX +#undef BSDWAIT +#endif + +/* + * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com + */ +#ifdef BSDWAIT +#undef USE_WAIT2 +#endif + +/* + * Define if you have the utempter utmp helper program + */ +#undef HAVE_UTEMPTER + +/* + * If ttyslot() breaks getlogin() by returning indexes to utmp entries + * of type DEAD_PROCESS, then our getlogin() replacement should be + * selected by defining BUGGYGETLOGIN. + */ +#undef BUGGYGETLOGIN + +/* + * If your system has the calls setreuid() and setregid(), + * define HAVE_SETREUID. Otherwise screen will use a forked process to + * safely create output files without retaining any special privileges. + */ +#undef HAVE_SETREUID + +/* + * If your system supports BSD4.4's seteuid() and setegid(), define + * HAVE_SETEUID. + */ +#undef HAVE_SETEUID + +/* + * If you want the "time" command to display the current load average + * define LOADAV. Maybe you must install screen with the needed + * privileges to read /dev/kmem. + * Note that NLIST_ stuff is only checked, when getloadavg() is not available. + */ +#undef LOADAV + +#undef LOADAV_NUM +#undef LOADAV_TYPE +#undef LOADAV_SCALE +#undef LOADAV_GETLOADAVG +#undef LOADAV_UNIX +#undef LOADAV_AVENRUN +#undef LOADAV_USE_NLIST64 + +#undef NLIST_DECLARED +#undef NLIST_STRUCT +#undef NLIST_NAME_UNION + +/* + * If your system has the new format /etc/ttys (like 4.3 BSD) and the + * getttyent(3) library functions, define GETTTYENT. + */ +#undef GETTTYENT + +/* + * Define USEBCOPY if the bcopy/memcpy from your system's C library + * supports the overlapping of source and destination blocks. When + * undefined, screen uses its own (probably slower) version of bcopy(). + * + * SYSV machines may have a working memcpy() -- Oh, this is + * quite unlikely. Tell me if you see one. + * "But then, memmove() should work, if at all available" he thought... + * Boing, never say "works everywhere" unless you checked SCO UNIX. + * Their memove fails the test in the configure script. Sigh. (Juergen) + */ +#undef USEBCOPY +#undef USEMEMCPY +#undef USEMEMMOVE + +/* + * If your system has vsprintf() and requires the use of the macros in + * "varargs.h" to use functions with variable arguments, + * define USEVARARGS. + */ +#undef USEVARARGS + +/* + * If your system has strerror() define this. + */ +#undef HAVE_STRERROR + +/* + * If the select return value doesn't treat a descriptor that is + * usable for reading and writing as two hits, define SELECT_BROKEN. + */ +#undef SELECT_BROKEN + +/* + * Define this if your system supports named pipes. + */ +#undef NAMEDPIPE + +/* + * Define this if your system exits select() immediatly if a pipe is + * opened read-only and no writer has opened it. + */ +#undef BROKEN_PIPE + +/* + * Define this if the unix-domain socket implementation doesn't + * create a socket in the filesystem. + */ +#undef SOCK_NOT_IN_FS + +/* + * If your system has setenv() and unsetenv() define USESETENV + */ +#undef USESETENV + +/* + * If your system does not come with a setenv()/putenv()/getenv() + * functions, you may bring in our own code by defining NEEDPUTENV. + */ +#undef NEEDPUTENV + +/* + * If the passwords are stored in a shadow file and you want the + * builtin lock to work properly, define SHADOWPW. + */ +#undef SHADOWPW + +/* + * If you are on a SYS V machine that restricts filename length to 14 + * characters, you may need to enforce that by setting NAME_MAX to 14 + */ +#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */ +#undef NAME_MAX + +/* + * define HAVE_RENAME if your system has a rename() function + */ +#undef HAVE_RENAME + +/* + * define HAVE__EXIT if your system has the _exit() call. + */ +#undef HAVE__EXIT + +/* + * define HAVE_LSTAT if your system has symlinks and the lstat() call. + */ +#undef HAVE_LSTAT + +/* + * define HAVE_UTIMES if your system has the utimes() call. + */ +#undef HAVE_UTIMES + +/* + * define HAVE_FCHOWN if your system has the fchown() call. + */ +#undef HAVE_FCHOWN + +/* + * define HAVE_FCHMOD if your system has the fchmod() call. + */ +#undef HAVE_FCHMOD + +/* + * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib). + */ +#undef HAVE_VSNPRINTF + +/* + * define HAVE_GETCWD if your system has the getcwd() call. + */ +#undef HAVE_GETCWD + +/* + * define HAVE_SETLOCALE if your system has the setlocale() call. + */ +#undef HAVE_SETLOCALE + +/* + * define HAVE_STRFTIME if your system has the strftime() call. + */ +#undef HAVE_STRFTIME + +/* + * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call + * and defines CODESET. + */ +#undef HAVE_NL_LANGINFO + +/* + * Newer versions of Solaris include fdwalk, which can greatly improve + * the startup time of screen; otherwise screen spends a lot of time + * closing file descriptors. + */ +#undef HAVE_FDWALK + +/* + * define HAVE_DEV_PTC if you have a /dev/ptc character special + * device. + */ +#undef HAVE_DEV_PTC + +/* + * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special + * device and support the ptsname(), grantpt(), unlockpt() functions. + */ +#undef HAVE_SVR4_PTYS + +/* + * define HAVE_GETPT if you have the getpt() function. + */ +#undef HAVE_GETPT + +/* + * define HAVE_OPENPTY if your system has the openpty() call. + */ +#undef HAVE_OPENPTY + +/* + * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen + * to unusual environments. E.g. For SunOs the defaults are "qpr" and + * "0123456789abcdef". For SunOs 4.1.2 + * #define PTYRANGE0 "pqrstuvwxyzPQRST" + * is recommended by Dan Jacobson. + */ +#undef PTYRANGE0 +#undef PTYRANGE1 + +#define USEVARARGS + +#undef HAVE_SYS_STROPTS_H + +#undef HAVE_SYS_WAIT_H + +#undef HAVE_SGTTY_H + +#undef HAVE_SYS_SELECT_H diff --git a/readline/readline/examples/rlfe/configure b/readline/readline/examples/rlfe/configure new file mode 100755 index 0000000000..b6d9b5be46 --- /dev/null +++ b/readline/readline/examples/rlfe/configure @@ -0,0 +1,5645 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69. +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 +test \$(( 1 + 1 )) = 2 || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org about your system, +$0: including any error possibly output before this +$0: message. Then install a modern shell, or manually run +$0: the script under such a shell if you do have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= +PACKAGE_URL= + +ac_unique_file="rlfe.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='LTLIBOBJS +LIBOBJS +XTERMPATH +WRITEPATH +AWK +EGREP +GREP +CPP +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +VERSION +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +with_pty_mode +with_pty_group +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pty-mode=mode default mode for ptys + --with-pty-group=group default group for ptys + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to the package provider. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +configure +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_cpp LINENO +# ---------------------- +# Try to preprocess conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_cpp () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } > conftest.i && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_cpp + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link + +# ac_fn_c_try_run LINENO +# ---------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes +# that executables *can* be run. +ac_fn_c_try_run () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then : + ac_retval=0 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=$ac_status +fi + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_run + +# ac_fn_c_check_func LINENO FUNC VAR +# ---------------------------------- +# Tests whether FUNC exists, setting the cache variable VAR accordingly +ac_fn_c_check_func () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Define $2 to an innocuous variant, in case declares $2. + For example, HP-UX 11i declares gettimeofday. */ +#define $2 innocuous_$2 + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $2 (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $2 + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $2 (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$2 || defined __stub___$2 +choke me +#endif + +int +main () +{ +return $2 (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel + +# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists and can be compiled using the include files in +# INCLUDES, setting the cache variable VAR accordingly. +ac_fn_c_check_header_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + eval "$3=yes" +else + eval "$3=no" +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_compile +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + +ac_config_headers="$ac_config_headers config.h" + +VERSION=0.4 + + + +old_CFLAGS="$CFLAGS" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if ${ac_cv_prog_CPP+:} false; then : + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + +else + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.i conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + # Broken: success on invalid input. +continue +else + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.i conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.i conftest.err conftest.$ac_ext +if $ac_preproc_ok; then : + +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details" "$LINENO" 5; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if ${ac_cv_path_GREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_GREP" || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if ${ac_cv_path_EGREP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_EGREP" || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +if test $ac_cv_c_compiler_gnu = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5 +$as_echo_n "checking whether $CC needs -traditional... " >&6; } +if ${ac_cv_prog_gcc_traditional+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_pattern="Autoconf.*'x'" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +Autoconf TIOCGETP +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes +else + ac_cv_prog_gcc_traditional=no +fi +rm -f conftest* + + + if test $ac_cv_prog_gcc_traditional = no; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +Autoconf TCGETA +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "$ac_pattern" >/dev/null 2>&1; then : + ac_cv_prog_gcc_traditional=yes +fi +rm -f conftest* + + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5 +$as_echo "$ac_cv_prog_gcc_traditional" >&6; } + if test $ac_cv_prog_gcc_traditional = yes; then + CC="$CC -traditional" + fi +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5 +$as_echo_n "checking for library containing strerror... " >&6; } +if ${ac_cv_search_strerror+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char strerror (); +int +main () +{ +return strerror (); + ; + return 0; +} +_ACEOF +for ac_lib in '' cposix; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_strerror=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_strerror+:} false; then : + break +fi +done +if ${ac_cv_search_strerror+:} false; then : + +else + ac_cv_search_strerror=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5 +$as_echo "$ac_cv_search_strerror" >&6; } +ac_res=$ac_cv_search_strerror +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +fi + + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +main(){exit(0);} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + +if test $CC != cc ; then +echo "Your $CC failed - restarting with CC=cc" 1>&6 + +echo "" 1>&6 + +CC=cc +export CC +exec $0 $configure_args +fi + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +main(){exit(0);} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + exec 5>&2 +eval $ac_link +echo "CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;" 1>&6 + +echo "$ac_compile" 1>&6 + +as_fn_error $? "Can't run the compiler - sorry" "$LINENO" 5 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +main() +{ + int __something_strange_(); + __something_strange_(0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + as_fn_error $? "Your compiler does not set the exit status - sorry" "$LINENO" 5 +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + + +if test -f etc/toolcheck; then +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for buggy tools..." >&5 +$as_echo "$as_me: checking for buggy tools..." >&6;} +sh etc/toolcheck 1>&6 +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System V..." >&5 +$as_echo "$as_me: checking for System V..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +int +main () +{ +int x = SIGCHLD | FNDELAY; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + $as_echo "#define SYSV 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris 2.x..." >&5 +$as_echo "$as_me: checking for Solaris 2.x..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#if defined(SVR4) && defined(sun) + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then : + LIBS="$LIBS -lsocket -lnsl -lkstat" +fi +rm -f conftest* + + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select..." >&5 +$as_echo "$as_me: checking select..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +select(0, 0, 0, 0, 0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + LIBS="$LIBS -lnet -lnsl" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select with $LIBS..." >&5 +$as_echo "$as_me: checking select with $LIBS..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +select(0, 0, 0, 0, 0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + as_fn_error $? "!!! no select - no screen" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select return value..." >&5 +$as_echo "$as_me: checking select return value..." >&6;} +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include + +char *nam = "/tmp/conftest$$"; + +#ifdef NAMEDPIPE + +#ifndef O_NONBLOCK +#define O_NONBLOCK O_NDELAY +#endif +#ifndef S_IFIFO +#define S_IFIFO 0010000 +#endif + + +main() +{ +#ifdef FD_SET + fd_set f; +#else + int f; +#endif + +#ifdef __FreeBSD__ +/* From Andrew A. Chernov (ache@astral.msk.su): + * opening RDWR fifo fails in BSD 4.4, but select return values are + * right. + */ + exit(0); +#endif + (void)alarm(5); +#ifdef POSIX + if (mkfifo(nam, 0777)) +#else + if (mknod(nam, S_IFIFO|0777, 0)) +#endif + exit(1); + close(0); + if (open(nam, O_RDWR | O_NONBLOCK)) + exit(1); + if (write(0, "TEST", 4) == -1) + exit(1); + +#else + +#include +#include +#include + +main() +{ + int s1, s2, l; + struct sockaddr_un a; +#ifdef FD_SET + fd_set f; +#else + int f; +#endif + + (void)alarm(5); + if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) + exit(1); + a.sun_family = AF_UNIX; + strcpy(a.sun_path, nam); + (void) unlink(nam); + if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1) + exit(1); + if (listen(s1, 2)) + exit(1); + if (fork() == 0) + { + if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) + kill(getppid(), 3); + (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2); + if (write(s2, "HELLO", 5) == -1) + kill(getppid(), 3); + exit(0); + } + l = sizeof(a); + close(0); + if (accept(s1, (struct sockaddr *)&a, &l)) + exit(1); +#endif + + +#ifdef FD_SET + FD_SET(0, &f); +#else + f = 1; +#endif + if (select(1, &f, 0, 0, 0) == -1) + exit(1); + if (select(1, &f, &f, 0, 0) != 2) + exit(1); + exit(0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo "- select is ok" 1>&6 + +else + echo "- select can't count" 1>&6 + $as_echo "#define SELECT_BROKEN 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent..." >&5 +$as_echo "$as_me: checking for tgetent..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +tgetent((char *)0, (char *)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + olibs="$LIBS" +LIBS="-lcurses $olibs" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libcurses..." >&5 +$as_echo "$as_me: checking libcurses..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + +#ifdef __hpux +__sorry_hpux_libcurses_is_totally_broken_in_10_10(); +#else +tgetent((char *)0, (char *)0); +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + LIBS="-ltermcap $olibs" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermcap..." >&5 +$as_echo "$as_me: checking libtermcap..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +tgetent((char *)0, (char *)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + LIBS="-ltermlib $olibs" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermlib..." >&5 +$as_echo "$as_me: checking libtermlib..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +tgetent((char *)0, (char *)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + LIBS="-lncurses $olibs" +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libncurses..." >&5 +$as_echo "$as_me: checking libncurses..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +tgetent((char *)0, (char *)0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + as_fn_error $? "!!! no tgetent - no screen" "$LINENO" 5 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +extern char *tgoto(); +main() +{ + exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1); +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + echo "- you use the termcap database" 1>&6 + +else + echo "- you use the terminfo database" 1>&6 + $as_echo "#define TERMINFO 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking ospeed..." >&5 +$as_echo "$as_me: checking ospeed..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +extern short ospeed; +int +main () +{ +ospeed=5; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + +else + $as_echo "#define NEED_OSPEED 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /dev/ptc..." >&5 +$as_echo "$as_me: checking for /dev/ptc..." >&6;} +if test -r /dev/ptc; then +$as_echo "#define HAVE_DEV_PTC 1" >>confdefs.h + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SVR4 ptys..." >&5 +$as_echo "$as_me: checking for SVR4 ptys..." >&6;} +sysvr4ptys= +if test -c /dev/ptmx ; then +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +ptsname(0);grantpt(0);unlockpt(0); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + $as_echo "#define HAVE_SVR4_PTYS 1" >>confdefs.h + +sysvr4ptys=1 +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi + +for ac_func in getpt +do : + ac_fn_c_check_func "$LINENO" "getpt" "ac_cv_func_getpt" +if test "x$ac_cv_func_getpt" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_GETPT 1 +_ACEOF + +fi +done + + +if test -z "$sysvr4ptys"; then +for ac_func in openpty +do : + ac_fn_c_check_func "$LINENO" "openpty" "ac_cv_func_openpty" +if test "x$ac_cv_func_openpty" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_OPENPTY 1 +_ACEOF + +else + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for openpty in -lutil" >&5 +$as_echo_n "checking for openpty in -lutil... " >&6; } +if ${ac_cv_lib_util_openpty+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lutil $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char openpty (); +int +main () +{ +return openpty (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_util_openpty=yes +else + ac_cv_lib_util_openpty=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_openpty" >&5 +$as_echo "$ac_cv_lib_util_openpty" >&6; } +if test "x$ac_cv_lib_util_openpty" = xyes; then : + $as_echo "#define HAVE_OPENPTY 1" >>confdefs.h + LIBS="$LIBS -lutil" +fi + +fi +done + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ptyranges..." >&5 +$as_echo "$as_me: checking for ptyranges..." >&6;} +if test -d /dev/ptym ; then +pdir='/dev/ptym' +else +pdir='/dev' +fi +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#ifdef M_UNIX + yes; +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then : + ptys=`echo /dev/ptyp??` +else + ptys=`echo $pdir/pty??` +fi +rm -f conftest* + +if test "$ptys" != "$pdir/pty??" ; then +p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'` +p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'` +cat >>confdefs.h <<_ACEOF +#define PTYRANGE0 "$p0" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PTYRANGE1 "$p1" +_ACEOF + +fi + + +# Check whether --with-pty-mode was given. +if test "${with_pty_mode+set}" = set; then : + withval=$with_pty_mode; ptymode="${withval}" +fi + + +# Check whether --with-pty-group was given. +if test "${with_pty_group+set}" = set; then : + withval=$with_pty_group; ptygrp="${withval}" +fi + +test -n "$ptymode" || ptymode=0620 +if test -n "$ptygrp" ; then +cat >>confdefs.h <<_ACEOF +#define PTYMODE $ptymode +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PTYGROUP $ptygrp +_ACEOF + +else + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking default tty permissions/group..." >&5 +$as_echo "$as_me: checking default tty permissions/group..." >&6;} +rm -f conftest_grp +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include +#include +main() +{ + struct stat sb; + char *x,*ttyname(); + int om, m; + FILE *fp; + + if (!(x = ttyname(0))) exit(1); + if (stat(x, &sb)) exit(1); + om = sb.st_mode; + if (om & 002) exit(0); + m = system("mesg y"); + if (m == -1 || m == 127) exit(1); + if (stat(x, &sb)) exit(1); + m = sb.st_mode; + if (chmod(x, om)) exit(1); + if (m & 002) exit(0); + if (sb.st_gid == getgid()) exit(1); + if (!(fp=fopen("conftest_grp", "w"))) + exit(1); + fprintf(fp, "%d\n", sb.st_gid); + fclose(fp); + exit(0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + + if test -f conftest_grp; then + ptygrp=`cat conftest_grp` + echo "- pty mode: $ptymode, group: $ptygrp" 1>&6 + + cat >>confdefs.h <<_ACEOF +#define PTYMODE $ptymode +_ACEOF + + cat >>confdefs.h <<_ACEOF +#define PTYGROUP $ptygrp +_ACEOF + + else + echo "- ptys are world accessable" 1>&6 + + fi + +else + + WRITEPATH='' + XTERMPATH='' + # Extract the first word of "write", so it can be a program name with args. +set dummy write; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_WRITEPATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $WRITEPATH in + [\\/]* | ?:[\\/]*) + ac_cv_path_WRITEPATH="$WRITEPATH" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_WRITEPATH="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +WRITEPATH=$ac_cv_path_WRITEPATH +if test -n "$WRITEPATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WRITEPATH" >&5 +$as_echo "$WRITEPATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + # Extract the first word of "xterm", so it can be a program name with args. +set dummy xterm; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_path_XTERMPATH+:} false; then : + $as_echo_n "(cached) " >&6 +else + case $XTERMPATH in + [\\/]* | ?:[\\/]*) + ac_cv_path_XTERMPATH="$XTERMPATH" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_XTERMPATH="$as_dir/$ac_word$ac_exec_ext" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + ;; +esac +fi +XTERMPATH=$ac_cv_path_XTERMPATH +if test -n "$XTERMPATH"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XTERMPATH" >&5 +$as_echo "$XTERMPATH" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + found= + if test -n "$WRITEPATH$XTERMPATH"; then + findfollow= + lsfollow= + found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null` + if test -n "$found"; then + findfollow=-follow + lsfollow=L + fi + if test -n "$XTERMPATH"; then + ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'` + if test tty != "$ptygrpn"; then + XTERMPATH= + fi + fi + fi + if test -n "$WRITEPATH$XTERMPATH"; then + found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print` + if test -n "$found"; then + ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'` + echo "- pty mode: $ptymode, group: $ptygrp" 1>&6 + + cat >>confdefs.h <<_ACEOF +#define PTYMODE $ptymode +_ACEOF + + cat >>confdefs.h <<_ACEOF +#define PTYGROUP $ptygrp +_ACEOF + + else + echo "- ptys are world accessable" 1>&6 + + fi + else + echo "- can't determine - assume ptys are world accessable" 1>&6 + + fi + + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +rm -f conftest_grp +fi + +if test -n "$posix" ; then + +echo "assuming posix signal definition" 1>&6 + +$as_echo "#define SIGVOID 1" >>confdefs.h + + +else + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers..." >&5 +$as_echo "$as_me: checking return type of signal handlers..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#ifdef signal +#undef signal +#endif +extern void (*signal ()) (); +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + $as_echo "#define SIGVOID 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sigset..." >&5 +$as_echo "$as_me: checking sigset..." >&6;} +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +int +main () +{ + +#ifdef SIGVOID +sigset(0, (void (*)())0); +#else +sigset(0, (int (*)())0); +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + $as_echo "#define USESIGSET 1" >>confdefs.h + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking signal implementation..." >&5 +$as_echo "$as_me: checking signal implementation..." >&6;} +if test "$cross_compiling" = yes; then : + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run test program while cross compiling +See \`config.log' for more details" "$LINENO" 5; } +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +#include +#include + +#ifndef SIGCLD +#define SIGCLD SIGCHLD +#endif +#ifdef USESIGSET +#define signal sigset +#endif + +int got; + +#ifdef SIGVOID +void +#endif +hand() +{ + got++; +} + +main() +{ + /* on hpux we use sigvec to get bsd signals */ +#ifdef __hpux + (void)signal(SIGCLD, hand); + kill(getpid(), SIGCLD); + kill(getpid(), SIGCLD); + if (got < 2) + exit(1); +#endif + exit(0); +} + +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + $as_echo "#define SYSVSIGS 1" >>confdefs.h + +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + + +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if ${ac_cv_header_stdc+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_header_stdc=yes +else + ac_cv_header_stdc=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then : + +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then : + : +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +if ac_fn_c_try_run "$LINENO"; then : + +else + ac_cv_header_stdc=no +fi +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ + conftest.$ac_objext conftest.beam conftest.$ac_ext +fi + +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +$as_echo "#define STDC_HEADERS 1" >>confdefs.h + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default +" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_header in sys/stropts.h sys/wait.h sgtty.h sys/select.h +do : + as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" +if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +for ac_header in term.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "term.h" "ac_cv_header_term_h" "$ac_includes_default" +if test "x$ac_cv_header_term_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_TERM_H 1 +_ACEOF + +fi + +done + + +ac_config_files="$ac_config_files Makefile" + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by $as_me, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Report bugs to the package provider." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi + ;; + + + esac + +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/readline/readline/examples/rlfe/configure.in b/readline/readline/examples/rlfe/configure.in new file mode 100644 index 0000000000..5c0678ab4d --- /dev/null +++ b/readline/readline/examples/rlfe/configure.in @@ -0,0 +1,444 @@ +dnl Process this file with autoconf to produce a configure script. + +m4_include([../../../config/override.m4]) + +AC_INIT(rlfe.c) +AC_CONFIG_HEADER(config.h) +VERSION=0.4 +AC_SUBST(VERSION) + +dnl +dnl Define some useful macros +dnl +AC_DEFUN([AC_PROGRAM_SOURCE], +[AC_REQUIRE([AC_PROG_CPP])AC_PROVIDE([$0])cat > conftest.c <&5 | sed -e '1,/_CUT_HERE_/d' -e 's/ //g' > conftest.out" +. ./conftest.out +rm -f conftest* +])dnl +dnl +define(AC_NOTE, +[echo "$1" 1>&AC_FD_MSG +])dnl + +old_CFLAGS="$CFLAGS" +AC_PROG_CC +AC_PROG_CPP +AC_PROG_GCC_TRADITIONAL +AC_ISC_POSIX + +AC_TRY_RUN(main(){exit(0);},,[ +if test $CC != cc ; then +AC_NOTE(Your $CC failed - restarting with CC=cc) +AC_NOTE() +CC=cc +export CC +exec $0 $configure_args +fi +]) + +AC_TRY_RUN(main(){exit(0);},, +exec 5>&2 +eval $ac_link +AC_NOTE(CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;) +AC_NOTE($ac_compile) +AC_MSG_ERROR(Can't run the compiler - sorry)) + +AC_TRY_RUN([ +main() +{ + int __something_strange_(); + __something_strange_(0); +} +],AC_MSG_ERROR(Your compiler does not set the exit status - sorry)) + +AC_PROG_AWK + +if test -f etc/toolcheck; then +AC_CHECKING(for buggy tools) +sh etc/toolcheck 1>&AC_FD_MSG +fi + +dnl +dnl **** special unix variants **** +dnl + +AC_CHECKING(for System V) +AC_TRY_COMPILE( +[#include +#include +#include ], [int x = SIGCHLD | FNDELAY;], , AC_DEFINE(SYSV)) + +AC_CHECKING(for Solaris 2.x) +AC_EGREP_CPP(yes, +[#if defined(SVR4) && defined(sun) + yes +#endif +], LIBS="$LIBS -lsocket -lnsl -lkstat") + +dnl +dnl **** select() **** +dnl + +AC_CHECKING(select) +AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],, +LIBS="$LIBS -lnet -lnsl" +AC_CHECKING(select with $LIBS) +AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],, +AC_MSG_ERROR(!!! no select - no screen)) +) +dnl +dnl **** check the select implementation **** +dnl + +AC_CHECKING(select return value) +AC_TRY_RUN([ +#include +#include +#include + +char *nam = "/tmp/conftest$$"; + +#ifdef NAMEDPIPE + +#ifndef O_NONBLOCK +#define O_NONBLOCK O_NDELAY +#endif +#ifndef S_IFIFO +#define S_IFIFO 0010000 +#endif + + +main() +{ +#ifdef FD_SET + fd_set f; +#else + int f; +#endif + +#ifdef __FreeBSD__ +/* From Andrew A. Chernov (ache@astral.msk.su): + * opening RDWR fifo fails in BSD 4.4, but select return values are + * right. + */ + exit(0); +#endif + (void)alarm(5); +#ifdef POSIX + if (mkfifo(nam, 0777)) +#else + if (mknod(nam, S_IFIFO|0777, 0)) +#endif + exit(1); + close(0); + if (open(nam, O_RDWR | O_NONBLOCK)) + exit(1); + if (write(0, "TEST", 4) == -1) + exit(1); + +#else + +#include +#include +#include + +main() +{ + int s1, s2, l; + struct sockaddr_un a; +#ifdef FD_SET + fd_set f; +#else + int f; +#endif + + (void)alarm(5); + if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) + exit(1); + a.sun_family = AF_UNIX; + strcpy(a.sun_path, nam); + (void) unlink(nam); + if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1) + exit(1); + if (listen(s1, 2)) + exit(1); + if (fork() == 0) + { + if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1) + kill(getppid(), 3); + (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2); + if (write(s2, "HELLO", 5) == -1) + kill(getppid(), 3); + exit(0); + } + l = sizeof(a); + close(0); + if (accept(s1, (struct sockaddr *)&a, &l)) + exit(1); +#endif + + +#ifdef FD_SET + FD_SET(0, &f); +#else + f = 1; +#endif + if (select(1, &f, 0, 0, 0) == -1) + exit(1); + if (select(1, &f, &f, 0, 0) != 2) + exit(1); + exit(0); +} +],AC_NOTE(- select is ok), +AC_NOTE(- select can't count) AC_DEFINE(SELECT_BROKEN)) + +dnl +dnl **** termcap or terminfo **** +dnl +AC_CHECKING(for tgetent) +AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, +olibs="$LIBS" +LIBS="-lcurses $olibs" +AC_CHECKING(libcurses) +AC_TRY_LINK(,[ +#ifdef __hpux +__sorry_hpux_libcurses_is_totally_broken_in_10_10(); +#else +tgetent((char *)0, (char *)0); +#endif +],, +LIBS="-ltermcap $olibs" +AC_CHECKING(libtermcap) +AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, +LIBS="-ltermlib $olibs" +AC_CHECKING(libtermlib) +AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, +LIBS="-lncurses $olibs" +AC_CHECKING(libncurses) +AC_TRY_LINK(,tgetent((char *)0, (char *)0);,, +AC_MSG_ERROR(!!! no tgetent - no screen)))))) + +AC_TRY_RUN([ +extern char *tgoto(); +main() +{ + exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1); +}], AC_NOTE(- you use the termcap database), +AC_NOTE(- you use the terminfo database) AC_DEFINE(TERMINFO)) +AC_CHECKING(ospeed) +AC_TRY_LINK(extern short ospeed;,ospeed=5;,,AC_DEFINE(NEED_OSPEED)) + +dnl +dnl **** PTY specific things **** +dnl +AC_CHECKING(for /dev/ptc) +if test -r /dev/ptc; then +AC_DEFINE(HAVE_DEV_PTC) +fi + +AC_CHECKING(for SVR4 ptys) +sysvr4ptys= +if test -c /dev/ptmx ; then +AC_TRY_LINK([],[ptsname(0);grantpt(0);unlockpt(0);],[AC_DEFINE(HAVE_SVR4_PTYS) +sysvr4ptys=1]) +fi + +AC_CHECK_FUNCS(getpt) + +dnl check for openpty() +if test -z "$sysvr4ptys"; then +AC_CHECK_FUNCS(openpty,, +[AC_CHECK_LIB(util,openpty, [AC_DEFINE(HAVE_OPENPTY)] [LIBS="$LIBS -lutil"])]) +fi + +AC_CHECKING(for ptyranges) +if test -d /dev/ptym ; then +pdir='/dev/ptym' +else +pdir='/dev' +fi +dnl SCO uses ptyp%d +AC_EGREP_CPP(yes, +[#ifdef M_UNIX + yes; +#endif +], ptys=`echo /dev/ptyp??`, ptys=`echo $pdir/pty??`) +dnl if test -c /dev/ptyp19; then +dnl ptys=`echo /dev/ptyp??` +dnl else +dnl ptys=`echo $pdir/pty??` +dnl fi +if test "$ptys" != "$pdir/pty??" ; then +p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'` +p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'` +AC_DEFINE_UNQUOTED(PTYRANGE0,"$p0") +AC_DEFINE_UNQUOTED(PTYRANGE1,"$p1") +fi + +dnl **** pty mode/group handling **** +dnl +dnl support provided by Luke Mewburn , 931222 +AC_ARG_WITH(pty-mode, [ --with-pty-mode=mode default mode for ptys], [ ptymode="${withval}" ]) +AC_ARG_WITH(pty-group, [ --with-pty-group=group default group for ptys], [ ptygrp="${withval}" ]) +test -n "$ptymode" || ptymode=0620 +if test -n "$ptygrp" ; then +AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) +AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) +else + +AC_CHECKING(default tty permissions/group) +rm -f conftest_grp +AC_TRY_RUN([ +#include +#include +#include +main() +{ + struct stat sb; + char *x,*ttyname(); + int om, m; + FILE *fp; + + if (!(x = ttyname(0))) exit(1); + if (stat(x, &sb)) exit(1); + om = sb.st_mode; + if (om & 002) exit(0); + m = system("mesg y"); + if (m == -1 || m == 127) exit(1); + if (stat(x, &sb)) exit(1); + m = sb.st_mode; + if (chmod(x, om)) exit(1); + if (m & 002) exit(0); + if (sb.st_gid == getgid()) exit(1); + if (!(fp=fopen("conftest_grp", "w"))) + exit(1); + fprintf(fp, "%d\n", sb.st_gid); + fclose(fp); + exit(0); +} +],[ + if test -f conftest_grp; then + ptygrp=`cat conftest_grp` + AC_NOTE([- pty mode: $ptymode, group: $ptygrp]) + AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) + AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) + else + AC_NOTE(- ptys are world accessable) + fi +],[ + WRITEPATH='' + XTERMPATH='' + AC_PATH_PROG(WRITEPATH, write) + AC_PATH_PROG(XTERMPATH, xterm) + found= + if test -n "$WRITEPATH$XTERMPATH"; then + findfollow= + lsfollow= + found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null` + if test -n "$found"; then + findfollow=-follow + lsfollow=L + fi + if test -n "$XTERMPATH"; then + ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'` + if test tty != "$ptygrpn"; then + XTERMPATH= + fi + fi + fi + if test -n "$WRITEPATH$XTERMPATH"; then + found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print` + if test -n "$found"; then + ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'` + AC_NOTE([- pty mode: $ptymode, group: $ptygrp]) + AC_DEFINE_UNQUOTED(PTYMODE, $ptymode) + AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp) + else + AC_NOTE(- ptys are world accessable) + fi + else + AC_NOTE(- can't determine - assume ptys are world accessable) + fi + ] +) +rm -f conftest_grp +fi + +dnl +dnl **** signal handling **** +dnl +if test -n "$posix" ; then + +dnl POSIX has reliable signals with void return type. +AC_NOTE(assuming posix signal definition) +AC_DEFINE(SIGVOID) + +else + +AC_CHECKING(return type of signal handlers) +AC_TRY_COMPILE( +[#include +#include +#ifdef signal +#undef signal +#endif +extern void (*signal ()) ();], [int i;], AC_DEFINE(SIGVOID)) +AC_CHECKING(sigset) +AC_TRY_LINK([ +#include +#include +],[ +#ifdef SIGVOID +sigset(0, (void (*)())0); +#else +sigset(0, (int (*)())0); +#endif +], AC_DEFINE(USESIGSET)) +AC_CHECKING(signal implementation) +AC_TRY_RUN([ +#include +#include + +#ifndef SIGCLD +#define SIGCLD SIGCHLD +#endif +#ifdef USESIGSET +#define signal sigset +#endif + +int got; + +#ifdef SIGVOID +void +#endif +hand() +{ + got++; +} + +main() +{ + /* on hpux we use sigvec to get bsd signals */ +#ifdef __hpux + (void)signal(SIGCLD, hand); + kill(getpid(), SIGCLD); + kill(getpid(), SIGCLD); + if (got < 2) + exit(1); +#endif + exit(0); +} +],,AC_DEFINE(SYSVSIGS)) + +fi + +AC_CHECK_HEADERS(sys/stropts.h sys/wait.h sgtty.h sys/select.h) +AC_CHECK_HEADERS(term.h) + +AC_OUTPUT(Makefile) diff --git a/readline/readline/examples/rlfe/extern.h b/readline/readline/examples/rlfe/extern.h new file mode 100644 index 0000000000..2fe50250cc --- /dev/null +++ b/readline/readline/examples/rlfe/extern.h @@ -0,0 +1,40 @@ +/* Copyright (c) 1993-2002 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + **************************************************************** + * $Id: extern.h,v 1.18 1994/05/31 12:31:57 mlschroe Exp $ FAU + */ + +#if !defined(__GNUC__) || __GNUC__ < 2 +#undef __attribute__ +#define __attribute__(x) +#endif + +#if !defined (__P) +# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) +# define __P(protos) protos +# else +# define __P(protos) () +# endif +#endif + +/* pty.c */ +extern int OpenPTY __P((char **)); +extern void InitPTY __P((int)); diff --git a/readline/readline/examples/rlfe/os.h b/readline/readline/examples/rlfe/os.h new file mode 100644 index 0000000000..df06c75809 --- /dev/null +++ b/readline/readline/examples/rlfe/os.h @@ -0,0 +1,531 @@ +/* Copyright (c) 1993-2002 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + **************************************************************** + * $Id: os.h,v 1.10 1994/05/31 12:32:22 mlschroe Exp $ FAU + */ + +#include +#include + +#include + +/* In strict ANSI mode, HP-UX machines define __hpux but not hpux */ +#if defined(__hpux) && !defined(hpux) +# define hpux +#endif + +#if defined(__bsdi__) || defined(__386BSD__) || defined(_CX_UX) || defined(hpux) || defined(_IBMR2) || defined(linux) +# include +#endif /* __bsdi__ || __386BSD__ || _CX_UX || hpux || _IBMR2 || linux */ + +#ifdef ISC +# ifdef ENAMETOOLONG +# undef ENAMETOOLONG +# endif +# ifdef ENOTEMPTY +# undef ENOTEMPTY +# endif +# include +# include +#endif + +#ifdef sun +# define getpgrp __getpgrp +# define exit __exit +#endif +#ifdef POSIX +# include +# if defined(__STDC__) +# include +# endif /* __STDC__ */ +#endif /* POSIX */ +#ifdef sun +# undef getpgrp +# undef exit +#endif /* sun */ + +#ifndef linux /* all done in */ +extern int errno; +#endif /* linux */ +#ifndef HAVE_STRERROR +/* No macros, please */ +#undef strerror +#endif + +#if !defined(SYSV) && !defined(linux) +# ifdef NEWSOS +# define strlen ___strlen___ +# include +# undef strlen +# else /* NEWSOS */ +# include +# endif /* NEWSOS */ +#else /* SYSV */ +# if defined(SVR4) || defined(NEWSOS) +# define strlen ___strlen___ +# include +# undef strlen +# if !defined(NEWSOS) && !defined(__hpux) + extern size_t strlen(const char *); +# endif +# else /* SVR4 */ +# include +# endif /* SVR4 */ +#endif /* SYSV */ + +#ifdef USEVARARGS +# if defined(__STDC__) +# include +# define VA_LIST(var) va_list var; +# define VA_DOTS ... +# define VA_DECL +# define VA_START(ap, fmt) va_start(ap, fmt) +# define VA_ARGS(ap) ap +# define VA_END(ap) va_end(ap) +# else +# include +# define VA_LIST(var) va_list var; +# define VA_DOTS va_alist +# define VA_DECL va_dcl +# define VA_START(ap, fmt) va_start(ap) +# define VA_ARGS(ap) ap +# define VA_END(ap) va_end(ap) +# endif +#else +# define VA_LIST(var) +# define VA_DOTS p1, p2, p3, p4, p5, p6 +# define VA_DECL unsigned long VA_DOTS; +# define VA_START(ap, fmt) +# define VA_ARGS(ap) VA_DOTS +# define VA_END(ap) +# undef vsnprintf +# define vsnprintf xsnprintf +#endif + +#if !defined(sun) && !defined(B43) && !defined(ISC) && !defined(pyr) && !defined(_CX_UX) +# include +#endif +#include + +#ifdef M_UNIX /* SCO */ +# include +# include +# define ftruncate(fd, s) chsize(fd, s) +#endif + +#ifdef SYSV +# define index strchr +# define rindex strrchr +# define bzero(poi,len) memset(poi,0,len) +# define bcmp memcmp +# define killpg(pgrp,sig) kill( -(pgrp), sig) +#endif + +#ifndef HAVE_GETCWD +# define getcwd(b,l) getwd(b) +#endif + +#ifndef USEBCOPY +# ifdef USEMEMMOVE +# define bcopy(s,d,len) memmove(d,s,len) +# else +# ifdef USEMEMCPY +# define bcopy(s,d,len) memcpy(d,s,len) +# else +# define NEED_OWN_BCOPY +# define bcopy xbcopy +# endif +# endif +#endif + +#ifdef hpux +# define setreuid(ruid, euid) setresuid(ruid, euid, -1) +# define setregid(rgid, egid) setresgid(rgid, egid, -1) +#endif + +#if defined(HAVE_SETEUID) || defined(HAVE_SETREUID) +# define USE_SETEUID +#endif + +#if !defined(HAVE__EXIT) && !defined(_exit) +#define _exit(x) exit(x) +#endif + +#ifndef HAVE_UTIMES +# define utimes utime +#endif + +#ifdef BUILTIN_TELNET +# include +# include +#endif + +#if defined(USE_LOCALE) && (!defined(HAVE_SETLOCALE) || !defined(HAVE_STRFTIME)) +# undef USE_LOCALE +#endif + +/***************************************************************** + * terminal handling + */ + +#if defined (POSIX) || defined (__FreeBSD__) +# include +# ifdef hpux +# include +# endif /* hpux */ +# ifdef NCCS +# define MAXCC NCCS +# else +# define MAXCC 256 +# endif +#else /* POSIX */ +# ifdef TERMIO +# include +# ifdef NCC +# define MAXCC NCC +# else +# define MAXCC 256 +# endif +# ifdef CYTERMIO +# include +# endif +# else /* TERMIO */ +# if defined (HAVE_SGTTY_H) +# include +# endif +# endif /* TERMIO */ +#endif /* POSIX */ + +#ifndef VDISABLE +# ifdef _POSIX_VDISABLE +# define VDISABLE _POSIX_VDISABLE +# else +# define VDISABLE 0377 +# endif /* _POSIX_VDISABLE */ +#endif /* !VDISABLE */ + + +/* on sgi, regardless of the stream head's read mode (RNORM/RMSGN/RMSGD) + * TIOCPKT mode causes data loss if our buffer is too small (IOSIZE) + * to hold the whole packet at first read(). + * (Marc Boucher) + * + * matthew green: + * TIOCPKT is broken on dgux 5.4.1 generic AViiON mc88100 + * + * Joe Traister: On AIX4, programs like irc won't work if screen + * uses TIOCPKT (select fails to return on pty read). + */ +#if defined(sgi) || defined(DGUX) || defined(_IBMR2) +# undef TIOCPKT +#endif + +/* linux ncurses is broken, we have to use our own tputs */ +#if defined(linux) && defined(TERMINFO) +# define tputs xtputs +#endif + +/* Alexandre Oliva: SVR4 style ptys don't work with osf */ +#ifdef __osf__ +# undef HAVE_SVR4_PTYS +#endif + +/***************************************************************** + * utmp handling + */ + +#ifdef GETUTENT + typedef char *slot_t; +#else + typedef int slot_t; +#endif + +#if defined(UTMPOK) || defined(BUGGYGETLOGIN) +# if defined(SVR4) && !defined(DGUX) && !defined(__hpux) && !defined(linux) +# include +# define UTMPFILE UTMPX_FILE +# define utmp utmpx +# define getutent getutxent +# define getutid getutxid +# define getutline getutxline +# define pututline pututxline +# define setutent setutxent +# define endutent endutxent +# define ut_time ut_xtime +# else /* SVR4 */ +# include +# endif /* SVR4 */ +# ifdef apollo + /* + * We don't have GETUTENT, so we dig into utmp ourselves. + * But we save the permanent filedescriptor and + * open utmp just when we need to. + * This code supports an unsorted utmp. jw. + */ +# define UTNOKEEP +# endif /* apollo */ + +# ifndef UTMPFILE +# ifdef UTMP_FILE +# define UTMPFILE UTMP_FILE +# else +# ifdef _PATH_UTMP +# define UTMPFILE _PATH_UTMP +# else +# define UTMPFILE "/etc/utmp" +# endif /* _PATH_UTMP */ +# endif +# endif + +#endif /* UTMPOK || BUGGYGETLOGIN */ + +#if !defined(UTMPOK) && defined(USRLIMIT) +# undef USRLIMIT +#endif + +#ifdef LOGOUTOK +# ifndef LOGINDEFAULT +# define LOGINDEFAULT 0 +# endif +#else +# ifdef LOGINDEFAULT +# undef LOGINDEFAULT +# endif +# define LOGINDEFAULT 1 +#endif + + +/***************************************************************** + * file stuff + */ + +#ifndef F_OK +#define F_OK 0 +#endif +#ifndef X_OK +#define X_OK 1 +#endif +#ifndef W_OK +#define W_OK 2 +#endif +#ifndef R_OK +#define R_OK 4 +#endif + +#ifndef S_IFIFO +#define S_IFIFO 0010000 +#endif +#ifndef S_IREAD +#define S_IREAD 0000400 +#endif +#ifndef S_IWRITE +#define S_IWRITE 0000200 +#endif +#ifndef S_IEXEC +#define S_IEXEC 0000100 +#endif + +#if defined(S_IFIFO) && defined(S_IFMT) && !defined(S_ISFIFO) +#define S_ISFIFO(mode) (((mode) & S_IFMT) == S_IFIFO) +#endif +#if defined(S_IFSOCK) && defined(S_IFMT) && !defined(S_ISSOCK) +#define S_ISSOCK(mode) (((mode) & S_IFMT) == S_IFSOCK) +#endif +#if defined(S_IFCHR) && defined(S_IFMT) && !defined(S_ISCHR) +#define S_ISCHR(mode) (((mode) & S_IFMT) == S_IFCHR) +#endif +#if defined(S_IFDIR) && defined(S_IFMT) && !defined(S_ISDIR) +#define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR) +#endif +#if defined(S_IFLNK) && defined(S_IFMT) && !defined(S_ISLNK) +#define S_ISLNK(mode) (((mode) & S_IFMT) == S_IFLNK) +#endif + +/* + * SunOS 4.1.3: `man 2V open' has only one line that mentions O_NOBLOCK: + * + * O_NONBLOCK Same as O_NDELAY above. + * + * on the very same SunOS 4.1.3, I traced the open system call and found + * that an open("/dev/ttyy08", O_RDWR|O_NONBLOCK|O_NOCTTY) was blocked, + * whereas open("/dev/ttyy08", O_RDWR|O_NDELAY |O_NOCTTY) went through. + * + * For this simple reason I now favour O_NDELAY. jw. 4.5.95 + */ +#if defined(sun) && !defined(SVR4) +# undef O_NONBLOCK +#endif + +#if !defined(O_NONBLOCK) && defined(O_NDELAY) +# define O_NONBLOCK O_NDELAY +#endif + +#if !defined(FNBLOCK) && defined(FNONBLOCK) +# define FNBLOCK FNONBLOCK +#endif +#if !defined(FNBLOCK) && defined(FNDELAY) +# define FNBLOCK FNDELAY +#endif +#if !defined(FNBLOCK) && defined(O_NONBLOCK) +# define FNBLOCK O_NONBLOCK +#endif + +#ifndef POSIX +#undef mkfifo +#define mkfifo(n,m) mknod(n,S_IFIFO|(m),0) +#endif + +#if !defined(HAVE_LSTAT) && !defined(lstat) +# define lstat stat +#endif + +/***************************************************************** + * signal handling + */ + +#ifdef SIGVOID +# define SIGRETURN +# define sigret_t void +#else +# define SIGRETURN return 0; +# define sigret_t int +#endif + +/* Geeeee, reverse it? */ +#if defined(SVR4) || (defined(SYSV) && defined(ISC)) || defined(_AIX) || defined(linux) || defined(ultrix) || defined(__386BSD__) || defined(__bsdi__) || defined(POSIX) || defined(NeXT) +# define SIGHASARG +#endif + +#ifdef SIGHASARG +# define SIGPROTOARG (int) +# define SIGDEFARG (sigsig) int sigsig; +# define SIGARG 0 +#else +# define SIGPROTOARG (void) +# define SIGDEFARG () +# define SIGARG +#endif + +#ifndef SIGCHLD +#define SIGCHLD SIGCLD +#endif + +#if defined(POSIX) || defined(hpux) +# define signal xsignal +#else +# ifdef USESIGSET +# define signal sigset +# endif /* USESIGSET */ +#endif + +/* used in screen.c and attacher.c */ +#ifndef NSIG /* kbeal needs these w/o SYSV */ +# define NSIG 32 +#endif /* !NSIG */ + + +/***************************************************************** + * Wait stuff + */ + +#if (!defined(sysV68) && !defined(M_XENIX)) || defined(NeXT) || defined(M_UNIX) +# include +#endif + +#ifndef WTERMSIG +# ifndef BSDWAIT /* if wait is NOT a union: */ +# define WTERMSIG(status) (status & 0177) +# else +# define WTERMSIG(status) status.w_T.w_Termsig +# endif +#endif + +#ifndef WSTOPSIG +# ifndef BSDWAIT /* if wait is NOT a union: */ +# define WSTOPSIG(status) ((status >> 8) & 0377) +# else +# define WSTOPSIG(status) status.w_S.w_Stopsig +# endif +#endif + +/* NET-2 uses WCOREDUMP */ +#if defined(WCOREDUMP) && !defined(WIFCORESIG) +# define WIFCORESIG(status) WCOREDUMP(status) +#endif + +#ifndef WIFCORESIG +# ifndef BSDWAIT /* if wait is NOT a union: */ +# define WIFCORESIG(status) (status & 0200) +# else +# define WIFCORESIG(status) status.w_T.w_Coredump +# endif +#endif + +#ifndef WEXITSTATUS +# ifndef BSDWAIT /* if wait is NOT a union: */ +# define WEXITSTATUS(status) ((status >> 8) & 0377) +# else +# define WEXITSTATUS(status) status.w_T.w_Retcode +# endif +#endif + + +/***************************************************************** + * select stuff + */ + +#if defined(M_XENIX) || defined(M_UNIX) || defined(_SEQUENT_) || defined (__INTERIX) +#include /* for timeval + FD... */ +#endif + +/* + * SunOS 3.5 - Tom Schmidt - Micron Semiconductor, Inc - 27-Jul-93 + * tschmidt@vax.micron.com + */ +#ifndef FD_SET +# ifndef SUNOS3 +typedef struct fd_set { int fds_bits[1]; } fd_set; +# endif +# define FD_ZERO(fd) ((fd)->fds_bits[0] = 0) +# define FD_SET(b, fd) ((fd)->fds_bits[0] |= 1 << (b)) +# define FD_ISSET(b, fd) ((fd)->fds_bits[0] & 1 << (b)) +# define FD_SETSIZE 32 +#endif + + +/***************************************************************** + * user defineable stuff + */ + +#ifndef TERMCAP_BUFSIZE +# define TERMCAP_BUFSIZE 2048 +#endif + +#ifndef MAXPATHLEN +# define MAXPATHLEN 1024 +#endif + +/* + * you may try to vary this value. Use low values if your (VMS) system + * tends to choke when pasting. Use high values if you want to test + * how many characters your pty's can buffer. + */ +#define IOSIZE 4096 diff --git a/readline/readline/examples/rlfe/pty.c b/readline/readline/examples/rlfe/pty.c new file mode 100644 index 0000000000..556272040c --- /dev/null +++ b/readline/readline/examples/rlfe/pty.c @@ -0,0 +1,388 @@ +/* Copyright (c) 1993-2002 + * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de) + * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de) + * Copyright (c) 1987 Oliver Laumann + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program (see the file COPYING); if not, write to the + * Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + **************************************************************** + */ +#include "config.h" + +#include +#include +#include +#include + +#include + +#include "screen.h" + +#ifndef sun +# include +#endif + +/* for solaris 2.1, Unixware (SVR4.2) and possibly others */ +#if defined (HAVE_SVR4_PTYS) && defined (HAVE_SYS_STROPTS_H) +# include +#endif + +#if defined(sun) && defined(LOCKPTY) && !defined(TIOCEXCL) +# include +#endif + +#ifdef ISC +# include +# include +# include +#endif + +#ifdef sgi +# include +#endif /* sgi */ + +#include "extern.h" + +/* + * if no PTYRANGE[01] is in the config file, we pick a default + */ +#ifndef PTYRANGE0 +# define PTYRANGE0 "qpr" +#endif +#ifndef PTYRANGE1 +# define PTYRANGE1 "0123456789abcdef" +#endif + +/* SVR4 pseudo ttys don't seem to work with SCO-5 */ +#ifdef M_UNIX +# undef HAVE_SVR4_PTYS +#endif + +extern int eff_uid; + +/* used for opening a new pty-pair: */ +static char PtyName[32], TtyName[32]; + +#if !(defined(sequent) || defined(_SEQUENT_) || defined(HAVE_SVR4_PTYS)) +# ifdef hpux +static char PtyProto[] = "/dev/ptym/ptyXY"; +static char TtyProto[] = "/dev/pty/ttyXY"; +# else +# ifdef M_UNIX +static char PtyProto[] = "/dev/ptypXY"; +static char TtyProto[] = "/dev/ttypXY"; +# else +static char PtyProto[] = "/dev/ptyXY"; +static char TtyProto[] = "/dev/ttyXY"; +# endif +# endif /* hpux */ +#endif + +static void initmaster __P((int)); + +#if defined(sun) +/* sun's utmp_update program opens the salve side, thus corrupting + */ +int pty_preopen = 1; +#else +int pty_preopen = 0; +#endif + +/* + * Open all ptys with O_NOCTTY, just to be on the safe side + * (RISCos mips breaks otherwise) + */ +#ifndef O_NOCTTY +# define O_NOCTTY 0 +#endif + +/***************************************************************/ + +static void +initmaster(f) +int f; +{ +#ifdef POSIX + tcflush(f, TCIOFLUSH); +#else +# ifdef TIOCFLUSH + (void) ioctl(f, TIOCFLUSH, (char *) 0); +# endif +#endif +#ifdef LOCKPTY + (void) ioctl(f, TIOCEXCL, (char *) 0); +#endif +} + +void +InitPTY(f) +int f; +{ + if (f < 0) + return; +#if defined(I_PUSH) && defined(HAVE_SVR4_PTYS) && !defined(sgi) && !defined(linux) && !defined(__osf__) && !defined(M_UNIX) + if (ioctl(f, I_PUSH, "ptem")) + Panic(errno, "InitPTY: cannot I_PUSH ptem"); + if (ioctl(f, I_PUSH, "ldterm")) + Panic(errno, "InitPTY: cannot I_PUSH ldterm"); +# ifdef sun + if (ioctl(f, I_PUSH, "ttcompat")) + Panic(errno, "InitPTY: cannot I_PUSH ttcompat"); +# endif +#endif +} + +/***************************************************************/ + +#if defined(OSX) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + register int f; + if ((f = open_controlling_pty(TtyName)) < 0) + return -1; + initmaster(f); + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#if (defined(sequent) || defined(_SEQUENT_)) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + char *m, *s; + register int f; + + if ((f = getpseudotty(&s, &m)) < 0) + return -1; +#ifdef _SEQUENT_ + fvhangup(s); +#endif + strncpy(PtyName, m, sizeof(PtyName)); + strncpy(TtyName, s, sizeof(TtyName)); + initmaster(f); + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#if defined(__sgi) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + int f; + char *name, *_getpty(); + sigret_t (*sigcld)__P(SIGPROTOARG); + + /* + * SIGCHLD set to SIG_DFL for _getpty() because it may fork() and + * exec() /usr/adm/mkpts + */ + sigcld = signal(SIGCHLD, SIG_DFL); + name = _getpty(&f, O_RDWR | O_NONBLOCK, 0600, 0); + signal(SIGCHLD, sigcld); + + if (name == 0) + return -1; + initmaster(f); + *ttyn = name; + return f; +} +#endif + +/***************************************************************/ + +#if defined(MIPS) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + register int f; + struct stat buf; + + strcpy(PtyName, "/dev/ptc"); + if ((f = open(PtyName, O_RDWR | O_NOCTTY | O_NONBLOCK)) < 0) + return -1; + if (fstat(f, &buf) < 0) + { + close(f); + return -1; + } + sprintf(TtyName, "/dev/ttyq%d", minor(buf.st_rdev)); + initmaster(f); + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#if defined(HAVE_SVR4_PTYS) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + register int f; + char *m, *ptsname(); + int unlockpt __P((int)), grantpt __P((int)); +#if defined(HAVE_GETPT) && defined(linux) + int getpt __P((void)); +#endif + sigret_t (*sigcld)__P(SIGPROTOARG); + + strcpy(PtyName, "/dev/ptmx"); +#if defined(HAVE_GETPT) && defined(linux) + if ((f = getpt()) == -1) +#else + if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1) +#endif + return -1; + + /* + * SIGCHLD set to SIG_DFL for grantpt() because it fork()s and + * exec()s pt_chmod + */ + sigcld = signal(SIGCHLD, SIG_DFL); + if ((m = ptsname(f)) == NULL || grantpt(f) || unlockpt(f)) + { + signal(SIGCHLD, sigcld); + close(f); + return -1; + } + signal(SIGCHLD, sigcld); + strncpy(TtyName, m, sizeof(TtyName)); + initmaster(f); + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#if defined(_AIX) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE) +#define PTY_DONE + +int +OpenPTY(ttyn) +char **ttyn; +{ + register int f; + + /* a dumb looking loop replaced by mycrofts code: */ + strcpy (PtyName, "/dev/ptc"); + if ((f = open (PtyName, O_RDWR | O_NOCTTY)) < 0) + return -1; + strncpy(TtyName, ttyname(f), sizeof(TtyName)); + if (eff_uid && access(TtyName, R_OK | W_OK)) + { + close(f); + return -1; + } + initmaster(f); +# ifdef _IBMR2 + pty_preopen = 1; +# endif + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#if defined(HAVE_OPENPTY) && !defined(PTY_DONE) +#define PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + int f, s; + if (openpty(&f, &s, TtyName, NULL, NULL) != 0) + return -1; + close(s); + initmaster(f); + pty_preopen = 1; + *ttyn = TtyName; + return f; +} +#endif + +/***************************************************************/ + +#ifndef PTY_DONE +int +OpenPTY(ttyn) +char **ttyn; +{ + register char *p, *q, *l, *d; + register int f; + + debug("OpenPTY: Using BSD style ptys.\n"); + strcpy(PtyName, PtyProto); + strcpy(TtyName, TtyProto); + for (p = PtyName; *p != 'X'; p++) + ; + for (q = TtyName; *q != 'X'; q++) + ; + for (l = PTYRANGE0; (*p = *l) != '\0'; l++) + { + for (d = PTYRANGE1; (p[1] = *d) != '\0'; d++) + { + debug1("OpenPTY tries '%s'\n", PtyName); + if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1) + continue; + q[0] = *l; + q[1] = *d; + if (eff_uid && access(TtyName, R_OK | W_OK)) + { + close(f); + continue; + } +#if defined(sun) && defined(TIOCGPGRP) && !defined(SUNOS3) + /* Hack to ensure that the slave side of the pty is + * unused. May not work in anything other than SunOS4.1 + */ + { + int pgrp; + + /* tcgetpgrp does not work (uses TIOCGETPGRP)! */ + if (ioctl(f, TIOCGPGRP, (char *)&pgrp) != -1 || errno != EIO) + { + close(f); + continue; + } + } +#endif + initmaster(f); + *ttyn = TtyName; + return f; + } + } + return -1; +} +#endif diff --git a/readline/readline/examples/rlfe/rlfe.c b/readline/readline/examples/rlfe/rlfe.c new file mode 100644 index 0000000000..f40b2ddaf0 --- /dev/null +++ b/readline/readline/examples/rlfe/rlfe.c @@ -0,0 +1,792 @@ +/* A front-end using readline to "cook" input lines. + * + * Copyright (C) 2004, 1999 Per Bothner + * + * This front-end program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as published + * by the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * Some code from Johnson & Troan: "Linux Application Development" + * (Addison-Wesley, 1998) was used directly or for inspiration. + * + * 2003-11-07 Wolfgang Taeuber + * Specify a history file and the size of the history file with command + * line options; use EDITOR/VISUAL to set vi/emacs preference. + */ + +/* PROBLEMS/TODO: + * + * Only tested under GNU/Linux and Mac OS 10.x; needs to be ported. + * + * Switching between line-editing-mode vs raw-char-mode depending on + * what tcgetattr returns is inherently not robust, plus it doesn't + * work when ssh/telnetting in. A better solution is possible if the + * tty system can send in-line escape sequences indicating the current + * mode, echo'd input, etc. That would also allow a user preference + * to set different colors for prompt, input, stdout, and stderr. + * + * When running mc -c under the Linux console, mc does not recognize + * mouse clicks, which mc does when not running under rlfe. + * + * Pasting selected text containing tabs is like hitting the tab character, + * which invokes readline completion. We don't want this. I don't know + * if this is fixable without integrating rlfe into a terminal emulator. + * + * Echo suppression is a kludge, but can only be avoided with better kernel + * support: We need a tty mode to disable "real" echoing, while still + * letting the inferior think its tty driver to doing echoing. + * Stevens's book claims SCR$ and BSD4.3+ have TIOCREMOTE. + * + * The latest readline may have some hooks we can use to avoid having + * to back up the prompt. (See HAVE_ALREADY_PROMPTED.) + * + * Desirable readline feature: When in cooked no-echo mode (e.g. password), + * echo characters are they are types with '*', but remove them when done. + * + * Asynchronous output while we're editing an input line should be + * inserted in the output view *before* the input line, so that the + * lines being edited (with the prompt) float at the end of the input. + * + * A "page mode" option to emulate more/less behavior: At each page of + * output, pause for a user command. This required parsing the output + * to keep track of line lengths. It also requires remembering the + * output, if we want an option to scroll back, which suggests that + * this should be integrated with a terminal emulator like xterm. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "config.h" +#include "extern.h" + +#if defined (HAVE_SYS_WAIT_H) +# include +#endif + +#ifdef READLINE_LIBRARY +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +#ifndef COMMAND +#define COMMAND "/bin/bash" +#endif +#ifndef COMMAND_ARGS +#define COMMAND_ARGS COMMAND +#endif + +#ifndef ALT_COMMAND +#define ALT_COMMAND "/bin/sh" +#endif +#ifndef ALT_COMMAND_ARGS +#define ALT_COMMAND_ARGS ALT_COMMAND +#endif + +#ifndef HAVE_MEMMOVE +# if __GNUC__ > 1 +# define memmove(d, s, n) __builtin_memcpy(d, s, n) +# else +# define memmove(d, s, n) memcpy(d, s, n) +# endif +#else +# define memmove(d, s, n) memcpy(d, s, n) +#endif + +#define APPLICATION_NAME "rlfe" + +static int in_from_inferior_fd; +static int out_to_inferior_fd; +static void set_edit_mode (); +static void usage_exit (); +static char *hist_file = 0; +static int hist_size = 0; + +/* Unfortunately, we cannot safely display echo from the inferior process. + The reason is that the echo bit in the pty is "owned" by the inferior, + and if we try to turn it off, we could confuse the inferior. + Thus, when echoing, we get echo twice: First readline echoes while + we're actually editing. Then we send the line to the inferior, and the + terminal driver send back an extra echo. + The work-around is to remember the input lines, and when we see that + line come back, we supress the output. + A better solution (supposedly available on SVR4) would be a smarter + terminal driver, with more flags ... */ +#define ECHO_SUPPRESS_MAX 1024 +char echo_suppress_buffer[ECHO_SUPPRESS_MAX]; +int echo_suppress_start = 0; +int echo_suppress_limit = 0; + +/*#define DEBUG*/ + +#ifdef DEBUG +FILE *logfile = NULL; +#define DPRINT0(FMT) (fprintf(logfile, FMT), fflush(logfile)) +#define DPRINT1(FMT, V1) (fprintf(logfile, FMT, V1), fflush(logfile)) +#define DPRINT2(FMT, V1, V2) (fprintf(logfile, FMT, V1, V2), fflush(logfile)) +#else +#define DPRINT0(FMT) ((void) 0) /* Do nothing */ +#define DPRINT1(FMT, V1) ((void) 0) /* Do nothing */ +#define DPRINT2(FMT, V1, V2) ((void) 0) /* Do nothing */ +#endif + +struct termios orig_term; + +/* Pid of child process. */ +static pid_t child = -1; + +static void +sig_child (int signo) +{ + int status; + wait (&status); + if (hist_file != 0) + { + write_history (hist_file); + if (hist_size) + history_truncate_file (hist_file, hist_size); + } + DPRINT0 ("(Child process died.)\n"); + tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); + exit (0); +} + +volatile int propagate_sigwinch = 0; + +/* sigwinch_handler + * propagate window size changes from input file descriptor to + * master side of pty. + */ +void sigwinch_handler(int signal) { + propagate_sigwinch = 1; +} + + +/* get_slave_pty() returns an integer file descriptor. + * If it returns < 0, an error has occurred. + * Otherwise, it has returned the slave file descriptor. + */ + +int get_slave_pty(char *name) { + struct group *gptr; + gid_t gid; + int slave = -1; + + /* chown/chmod the corresponding pty, if possible. + * This will only work if the process has root permissions. + * Alternatively, write and exec a small setuid program that + * does just this. + */ + if ((gptr = getgrnam("tty")) != 0) { + gid = gptr->gr_gid; + } else { + /* if the tty group does not exist, don't change the + * group on the slave pty, only the owner + */ + gid = -1; + } + + /* Note that we do not check for errors here. If this is code + * where these actions are critical, check for errors! + */ + chown(name, getuid(), gid); + /* This code only makes the slave read/writeable for the user. + * If this is for an interactive shell that will want to + * receive "write" and "wall" messages, OR S_IWGRP into the + * second argument below. + */ + chmod(name, S_IRUSR|S_IWUSR); + + /* open the corresponding slave pty */ + slave = open(name, O_RDWR); + return (slave); +} + +/* Certain special characters, such as ctrl/C, we want to pass directly + to the inferior, rather than letting readline handle them. */ + +static char special_chars[20]; +static int special_chars_count; + +static void +add_special_char(int ch) +{ + if (ch != 0) + special_chars[special_chars_count++] = ch; +} + +static int eof_char; + +static int +is_special_char(int ch) +{ + int i; +#if 0 + if (ch == eof_char && rl_point == rl_end) + return 1; +#endif + for (i = special_chars_count; --i >= 0; ) + if (special_chars[i] == ch) + return 1; + return 0; +} + +static char buf[1024]; +/* buf[0 .. buf_count-1] is the what has been emitted on the current line. + It is used as the readline prompt. */ +static int buf_count = 0; + +int do_emphasize_input = 1; +int current_emphasize_input; + +char *start_input_mode = "\033[1m"; +char *end_input_mode = "\033[0m"; + +int num_keys = 0; + +static void maybe_emphasize_input (int on) +{ + if (on == current_emphasize_input + || (on && ! do_emphasize_input)) + return; + fprintf (rl_outstream, on ? start_input_mode : end_input_mode); + fflush (rl_outstream); + current_emphasize_input = on; +} + +static void +null_prep_terminal (int meta) +{ +} + +static void +null_deprep_terminal () +{ + maybe_emphasize_input (0); +} + +static int +pre_input_change_mode (void) +{ + return 0; +} + +char pending_special_char; + +static void +line_handler (char *line) +{ + if (line == NULL) + { + char buf[1]; + DPRINT0("saw eof!\n"); + buf[0] = '\004'; /* ctrl/d */ + write (out_to_inferior_fd, buf, 1); + } + else + { + static char enter[] = "\r"; + /* Send line to inferior: */ + int length = strlen (line); + if (length > ECHO_SUPPRESS_MAX-2) + { + echo_suppress_start = 0; + echo_suppress_limit = 0; + } + else + { + if (echo_suppress_limit + length > ECHO_SUPPRESS_MAX - 2) + { + if (echo_suppress_limit - echo_suppress_start + length + <= ECHO_SUPPRESS_MAX - 2) + { + memmove (echo_suppress_buffer, + echo_suppress_buffer + echo_suppress_start, + echo_suppress_limit - echo_suppress_start); + echo_suppress_limit -= echo_suppress_start; + echo_suppress_start = 0; + } + else + { + echo_suppress_limit = 0; + } + echo_suppress_start = 0; + } + memcpy (echo_suppress_buffer + echo_suppress_limit, + line, length); + echo_suppress_limit += length; + echo_suppress_buffer[echo_suppress_limit++] = '\r'; + echo_suppress_buffer[echo_suppress_limit++] = '\n'; + } + write (out_to_inferior_fd, line, length); + if (pending_special_char == 0) + { + write (out_to_inferior_fd, enter, sizeof(enter)-1); + if (*line) + add_history (line); + } + free (line); + } + rl_callback_handler_remove (); + buf_count = 0; + num_keys = 0; + if (pending_special_char != 0) + { + write (out_to_inferior_fd, &pending_special_char, 1); + pending_special_char = 0; + } +} + +/* Value of rl_getc_function. + Use this because readline should read from stdin, not rl_instream, + points to the pty (so readline has monitor its terminal modes). */ + +int +my_rl_getc (FILE *dummy) +{ + int ch = rl_getc (stdin); + if (is_special_char (ch)) + { + pending_special_char = ch; + return '\r'; + } + return ch; +} + +int +main(int argc, char** argv) +{ + char *path; + int i; + int master; + char *name; + int in_from_tty_fd; + struct sigaction act; + struct winsize ws; + struct termios t; + int maxfd; + fd_set in_set; + static char empty_string[1] = ""; + char *prompt = empty_string; + int ioctl_err = 0; + int arg_base = 1; + +#ifdef DEBUG + logfile = fopen("/tmp/rlfe.log", "w"); +#endif + + while (arg_base= argc ) + usage_exit(); + switch(argv[arg_base][1]) + { + case 'h': + arg_base++; + hist_file = argv[arg_base]; + break; + case 's': + arg_base++; + hist_size = atoi(argv[arg_base]); + if (hist_size<0) + usage_exit(); + break; + default: + usage_exit(); + } + arg_base++; + } + if (hist_file) + read_history (hist_file); + + set_edit_mode (); + + rl_readline_name = APPLICATION_NAME; + + if ((master = OpenPTY (&name)) < 0) + { + perror("ptypair: could not open master pty"); + exit(1); + } + + DPRINT1("pty name: '%s'\n", name); + + /* set up SIGWINCH handler */ + act.sa_handler = sigwinch_handler; + sigemptyset(&(act.sa_mask)); + act.sa_flags = 0; + if (sigaction(SIGWINCH, &act, NULL) < 0) + { + perror("ptypair: could not handle SIGWINCH "); + exit(1); + } + + if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) < 0) + { + perror("ptypair: could not get window size"); + exit(1); + } + + if ((child = fork()) < 0) + { + perror("cannot fork"); + exit(1); + } + + if (child == 0) + { + int slave; /* file descriptor for slave pty */ + + /* We are in the child process */ + close(master); + +#ifdef TIOCSCTTY + if ((slave = get_slave_pty(name)) < 0) + { + perror("ptypair: could not open slave pty"); + exit(1); + } +#endif + + /* We need to make this process a session group leader, because + * it is on a new PTY, and things like job control simply will + * not work correctly unless there is a session group leader + * and process group leader (which a session group leader + * automatically is). This also disassociates us from our old + * controlling tty. + */ + if (setsid() < 0) + { + perror("could not set session leader"); + } + + /* Tie us to our new controlling tty. */ +#ifdef TIOCSCTTY + if (ioctl(slave, TIOCSCTTY, NULL)) + { + perror("could not set new controlling tty"); + } +#else + if ((slave = get_slave_pty(name)) < 0) + { + perror("ptypair: could not open slave pty"); + exit(1); + } +#endif + + /* make slave pty be standard in, out, and error */ + dup2(slave, STDIN_FILENO); + dup2(slave, STDOUT_FILENO); + dup2(slave, STDERR_FILENO); + + /* at this point the slave pty should be standard input */ + if (slave > 2) + { + close(slave); + } + + /* Try to restore window size; failure isn't critical */ + if (ioctl(STDOUT_FILENO, TIOCSWINSZ, &ws) < 0) + { + perror("could not restore window size"); + } + + /* now start the shell */ + { + static char* command_args[] = { COMMAND_ARGS, NULL }; + static char* alt_command_args[] = { ALT_COMMAND_ARGS, NULL }; + if (argc <= 1) + { + execvp (COMMAND, command_args); + execvp (ALT_COMMAND, alt_command_args); + } + else + execvp (argv[arg_base], &argv[arg_base]); + } + + /* should never be reached */ + exit(1); + } + + /* parent */ + signal (SIGCHLD, sig_child); + + /* Note that we only set termios settings for standard input; + * the master side of a pty is NOT a tty. + */ + tcgetattr(STDIN_FILENO, &orig_term); + + t = orig_term; + eof_char = t.c_cc[VEOF]; + /* add_special_char(t.c_cc[VEOF]);*/ + add_special_char(t.c_cc[VINTR]); + add_special_char(t.c_cc[VQUIT]); + add_special_char(t.c_cc[VSUSP]); +#if defined (VDISCARD) + add_special_char(t.c_cc[VDISCARD]); +#endif + + t.c_lflag &= ~(ICANON | ISIG | ECHO | ECHOCTL | ECHOE | \ + ECHOK | ECHONL +#if defined (ECHOKE) + | ECHOKE +#endif +#if defined (ECHOPRT) + | ECHOPRT +#endif + ); + t.c_iflag &= ~ICRNL; + t.c_iflag |= IGNBRK; + t.c_cc[VMIN] = 1; + t.c_cc[VTIME] = 0; + tcsetattr(STDIN_FILENO, TCSANOW, &t); + in_from_inferior_fd = master; + out_to_inferior_fd = master; + rl_instream = fdopen (master, "r"); + rl_getc_function = my_rl_getc; + + rl_prep_term_function = null_prep_terminal; + rl_deprep_term_function = null_deprep_terminal; + rl_pre_input_hook = pre_input_change_mode; + rl_callback_handler_install (prompt, line_handler); + + in_from_tty_fd = STDIN_FILENO; + FD_ZERO (&in_set); + maxfd = in_from_inferior_fd > in_from_tty_fd ? in_from_inferior_fd + : in_from_tty_fd; + for (;;) + { + int num; + FD_SET (in_from_inferior_fd, &in_set); + FD_SET (in_from_tty_fd, &in_set); + + num = select(maxfd+1, &in_set, NULL, NULL, NULL); + + if (propagate_sigwinch) + { + struct winsize ws; + if (ioctl (STDIN_FILENO, TIOCGWINSZ, &ws) >= 0) + { + ioctl (master, TIOCSWINSZ, &ws); + } + propagate_sigwinch = 0; + continue; + } + + if (num <= 0) + { + perror ("select"); + exit (-1); + } + if (FD_ISSET (in_from_tty_fd, &in_set)) + { + extern int _rl_echoing_p; + struct termios term_master; + int do_canon = 1; + int do_icrnl = 1; + int ioctl_ret; + + DPRINT1("[tty avail num_keys:%d]\n", num_keys); + + /* If we can't get tty modes for the master side of the pty, we + can't handle non-canonical-mode programs. Always assume the + master is in canonical echo mode if we can't tell. */ + ioctl_ret = tcgetattr(master, &term_master); + + if (ioctl_ret >= 0) + { + do_canon = (term_master.c_lflag & ICANON) != 0; + do_icrnl = (term_master.c_lflag & ICRNL) != 0; + _rl_echoing_p = (term_master.c_lflag & ECHO) != 0; + DPRINT1 ("echo,canon,crnl:%03d\n", + 100 * _rl_echoing_p + + 10 * do_canon + + 1 * do_icrnl); + } + else + { + if (ioctl_err == 0) + DPRINT1("tcgetattr on master fd failed: errno = %d\n", errno); + ioctl_err = 1; + } + + if (do_canon == 0 && num_keys == 0) + { + char ch[10]; + int count = read (STDIN_FILENO, ch, sizeof(ch)); + DPRINT1("[read %d chars from stdin: ", count); + DPRINT2(" \"%.*s\"]\n", count, ch); + if (do_icrnl) + { + int i = count; + while (--i >= 0) + { + if (ch[i] == '\r') + ch[i] = '\n'; + } + } + maybe_emphasize_input (1); + write (out_to_inferior_fd, ch, count); + } + else + { + if (num_keys == 0) + { + int i; + /* Re-install callback handler for new prompt. */ + if (prompt != empty_string) + free (prompt); + if (prompt == NULL) + { + DPRINT0("New empty prompt\n"); + prompt = empty_string; + } + else + { + if (do_emphasize_input && buf_count > 0) + { + prompt = malloc (buf_count + strlen (end_input_mode) + + strlen (start_input_mode) + 5); + sprintf (prompt, "\001%s\002%.*s\001%s\002", + end_input_mode, + buf_count, buf, + start_input_mode); + } + else + { + prompt = malloc (buf_count + 1); + memcpy (prompt, buf, buf_count); + prompt[buf_count] = '\0'; + } + DPRINT1("New prompt '%s'\n", prompt); +#if 0 /* ifdef HAVE_RL_ALREADY_PROMPTED */ + /* Doesn't quite work when do_emphasize_input is 1. */ + rl_already_prompted = buf_count > 0; +#else + if (buf_count > 0) + write (1, "\r", 1); +#endif + } + + rl_callback_handler_install (prompt, line_handler); + } + num_keys++; + maybe_emphasize_input (1); + rl_callback_read_char (); + } + } + else /* output from inferior. */ + { + int i; + int count; + int old_count; + if (buf_count > (sizeof(buf) >> 2)) + buf_count = 0; + count = read (in_from_inferior_fd, buf+buf_count, + sizeof(buf) - buf_count); + DPRINT2("read %d from inferior, buf_count=%d", count, buf_count); + DPRINT2(": \"%.*s\"", count, buf+buf_count); + maybe_emphasize_input (0); + if (count <= 0) + { + DPRINT0 ("(Connection closed by foreign host.)\n"); + tcsetattr(STDIN_FILENO, TCSANOW, &orig_term); + exit (0); + } + old_count = buf_count; + + /* Look for any pending echo that we need to suppress. */ + while (echo_suppress_start < echo_suppress_limit + && count > 0 + && buf[buf_count] == echo_suppress_buffer[echo_suppress_start]) + { + count--; + buf_count++; + echo_suppress_start++; + } + DPRINT1("suppressed %d characters of echo.\n", buf_count-old_count); + + /* Write to the terminal anything that was not suppressed. */ + if (count > 0) + write (1, buf + buf_count, count); + + /* Finally, look for a prompt candidate. + * When we get around to going input (from the keyboard), + * we will consider the prompt to be anything since the last + * line terminator. So we need to save that text in the + * initial part of buf. However, anything before the + * most recent end-of-line is not interesting. */ + buf_count += count; +#if 1 + for (i = buf_count; --i >= old_count; ) +#else + for (i = buf_count - 1; i-- >= buf_count - count; ) +#endif + { + if (buf[i] == '\n' || buf[i] == '\r') + { + i++; + memmove (buf, buf+i, buf_count - i); + buf_count -= i; + break; + } + } + DPRINT2("-> i: %d, buf_count: %d\n", i, buf_count); + } + } +} + +static void set_edit_mode () +{ + int vi = 0; + char *shellopts; + + shellopts = getenv ("SHELLOPTS"); + while (shellopts != 0) + { + if (strncmp ("vi", shellopts, 2) == 0) + { + vi = 1; + break; + } + shellopts = strchr (shellopts + 1, ':'); + } + + if (!vi) + { + if (getenv ("EDITOR") != 0) + vi |= strcmp (getenv ("EDITOR"), "vi") == 0; + } + + if (vi) + rl_variable_bind ("editing-mode", "vi"); + else + rl_variable_bind ("editing-mode", "emacs"); +} + + +static void usage_exit () +{ + fprintf (stderr, "Usage: rlfe [-h histfile] [-s size] cmd [arg1] [arg2] ...\n\n"); + exit (1); +} diff --git a/readline/readline/examples/rlfe/screen.h b/readline/readline/examples/rlfe/screen.h new file mode 100644 index 0000000000..5b040c3dac --- /dev/null +++ b/readline/readline/examples/rlfe/screen.h @@ -0,0 +1,2 @@ +/* Dummy header to avoid modifying pty.c */ +#include "os.h" diff --git a/readline/readline/examples/rlkeymaps.c b/readline/readline/examples/rlkeymaps.c new file mode 100644 index 0000000000..fef77b35ab --- /dev/null +++ b/readline/readline/examples/rlkeymaps.c @@ -0,0 +1,61 @@ +#include +#include +#include +#include + +#if defined (READLINE_LIBRARY) +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +int +main (int c, char **v) +{ + Keymap nmap, emacsmap, newemacs; + int r, errs; + + errs = 0; + nmap = rl_make_keymap (); + + r = rl_set_keymap_name ("emacs", nmap); + if (r >= 0) + { + fprintf (stderr, "rlkeymaps: error: able to rename `emacs' keymap\n"); + errs++; + } + + emacsmap = rl_get_keymap_by_name ("emacs"); + r = rl_set_keymap_name ("newemacs", emacsmap); + if (r >= 0) + { + fprintf (stderr, "rlkeymaps: error: able to set new name for emacs keymap\n"); + errs++; + } + + r = rl_set_keymap_name ("newemacs", nmap); + if (r < 0) + { + fprintf (stderr, "rlkeymaps: error: newemacs: could not set keymap name\n"); + errs++; + } + + newemacs = rl_copy_keymap (emacsmap); + r = rl_set_keymap_name ("newemacs", newemacs); + if (r < 0) + { + fprintf (stderr, "rlkeymaps: error: newemacs: could not set `newemacs' keymap to new map\n"); + errs++; + } + + r = rl_set_keymap_name ("emacscopy", newemacs); + if (r < 0) + { + fprintf (stderr, "rlkeymaps: error: emacscopy: could not rename created keymap\n"); + errs++; + } + + exit (errs); +} diff --git a/readline/readline/examples/rlptytest.c b/readline/readline/examples/rlptytest.c new file mode 100644 index 0000000000..9c42f8a279 --- /dev/null +++ b/readline/readline/examples/rlptytest.c @@ -0,0 +1,345 @@ +/* + * + * Another test harness for the readline callback interface. + * + * Author: Bob Rossi + */ + +#if defined (HAVE_CONFIG_H) +#include +#endif + +#include +#include +#include +#include + +#include +#include + +#include + +#if 1 /* LINUX */ +#include +#else +#include +#endif + +#ifdef READLINE_LIBRARY +# include "readline.h" +#else +# include +#endif + +/** + * Master/Slave PTY used to keep readline off of stdin/stdout. + */ +static int masterfd = -1; +static int slavefd; + +void +sigint (s) + int s; +{ + tty_reset (STDIN_FILENO); + close (masterfd); + close (slavefd); + printf ("\n"); + exit (0); +} + +void +sigwinch (s) + int s; +{ + rl_resize_terminal (); +} + +static int +user_input() +{ + int size; + const int MAX = 1024; + char *buf = (char *)malloc(MAX+1); + + size = read (STDIN_FILENO, buf, MAX); + if (size == -1) + return -1; + + size = write (masterfd, buf, size); + if (size == -1) + return -1; + + return 0; +} + +static int +readline_input() +{ + const int MAX = 1024; + char *buf = (char *)malloc(MAX+1); + int size; + + size = read (masterfd, buf, MAX); + if (size == -1) + { + free( buf ); + buf = NULL; + return -1; + } + + buf[size] = 0; + + /* Display output from readline */ + if ( size > 0 ) + fprintf(stderr, "%s", buf); + + free( buf ); + buf = NULL; + return 0; +} + +static void +rlctx_send_user_command(char *line) +{ + /* This happens when rl_callback_read_char gets EOF */ + if ( line == NULL ) + return; + + if (strcmp (line, "exit") == 0) { + tty_reset (STDIN_FILENO); + close (masterfd); + close (slavefd); + printf ("\n"); + exit (0); + } + + /* Don't add the enter command */ + if ( line && *line != '\0' ) + add_history(line); +} + +static void +custom_deprep_term_function () +{ +} + +static int +init_readline (int inputfd, int outputfd) +{ + FILE *inputFILE, *outputFILE; + + inputFILE = fdopen (inputfd, "r"); + if (!inputFILE) + return -1; + + outputFILE = fdopen (outputfd, "w"); + if (!outputFILE) + return -1; + + rl_instream = inputFILE; + rl_outstream = outputFILE; + + /* Tell readline what the prompt is if it needs to put it back */ + rl_callback_handler_install("(rltest): ", rlctx_send_user_command); + + /* Set the terminal type to dumb so the output of readline can be + * understood by tgdb */ + if ( rl_reset_terminal("dumb") == -1 ) + return -1; + + /* For some reason, readline can not deprep the terminal. + * However, it doesn't matter because no other application is working on + * the terminal besides readline */ + rl_deprep_term_function = custom_deprep_term_function; + + using_history(); + read_history(".history"); + + return 0; +} + +static int +main_loop(void) +{ + fd_set rset; + int max; + + max = (masterfd > STDIN_FILENO) ? masterfd : STDIN_FILENO; + max = (max > slavefd) ? max : slavefd; + + for (;;) + { + /* Reset the fd_set, and watch for input from GDB or stdin */ + FD_ZERO(&rset); + + FD_SET(STDIN_FILENO, &rset); + FD_SET(slavefd, &rset); + FD_SET(masterfd, &rset); + + /* Wait for input */ + if (select(max + 1, &rset, NULL, NULL, NULL) == -1) + { + if (errno == EINTR) + continue; + else + return -1; + } + + /* Input received through the pty: Handle it + * Wrote to masterfd, slave fd has that input, alert readline to read it. + */ + if (FD_ISSET(slavefd, &rset)) + rl_callback_read_char(); + + /* Input received through the pty. + * Readline read from slavefd, and it wrote to the masterfd. + */ + if (FD_ISSET(masterfd, &rset)) + if ( readline_input() == -1 ) + return -1; + + /* Input received: Handle it, write to masterfd (input to readline) */ + if (FD_ISSET(STDIN_FILENO, &rset)) + if ( user_input() == -1 ) + return -1; + } + + return 0; +} + +/* The terminal attributes before calling tty_cbreak */ +static struct termios save_termios; +static struct winsize size; +static enum { RESET, TCBREAK } ttystate = RESET; + +/* tty_cbreak: Sets terminal to cbreak mode. Also known as noncanonical mode. + * 1. Signal handling is still turned on, so the user can still type those. + * 2. echo is off + * 3. Read in one char at a time. + * + * fd - The file descriptor of the terminal + * + * Returns: 0 on sucess, -1 on error + */ +int tty_cbreak(int fd){ + struct termios buf; + int ttysavefd = -1; + + if(tcgetattr(fd, &save_termios) < 0) + return -1; + + buf = save_termios; + buf.c_lflag &= ~(ECHO | ICANON); + buf.c_iflag &= ~(ICRNL | INLCR); + buf.c_cc[VMIN] = 1; + buf.c_cc[VTIME] = 0; + +#if defined (VLNEXT) && defined (_POSIX_VDISABLE) + buf.c_cc[VLNEXT] = _POSIX_VDISABLE; +#endif + +#if defined (VDSUSP) && defined (_POSIX_VDISABLE) + buf.c_cc[VDSUSP] = _POSIX_VDISABLE; +#endif + + /* enable flow control; only stty start char can restart output */ +#if 0 + buf.c_iflag |= (IXON|IXOFF); +#ifdef IXANY + buf.c_iflag &= ~IXANY; +#endif +#endif + + /* disable flow control; let ^S and ^Q through to pty */ + buf.c_iflag &= ~(IXON|IXOFF); +#ifdef IXANY + buf.c_iflag &= ~IXANY; +#endif + + if(tcsetattr(fd, TCSAFLUSH, &buf) < 0) + return -1; + + ttystate = TCBREAK; + ttysavefd = fd; + + /* set size */ + if(ioctl(fd, TIOCGWINSZ, (char *)&size) < 0) + return -1; + +#ifdef DEBUG + err_msg("%d rows and %d cols\n", size.ws_row, size.ws_col); +#endif + + return (0); +} + +int +tty_off_xon_xoff (int fd) +{ + struct termios buf; + int ttysavefd = -1; + + if(tcgetattr(fd, &buf) < 0) + return -1; + + buf.c_iflag &= ~(IXON|IXOFF); + + if(tcsetattr(fd, TCSAFLUSH, &buf) < 0) + return -1; + + return 0; +} + +/* tty_reset: Sets the terminal attributes back to their previous state. + * PRE: tty_cbreak must have already been called. + * + * fd - The file descrioptor of the terminal to reset. + * + * Returns: 0 on success, -1 on error + */ +int tty_reset(int fd) +{ + if(ttystate != TCBREAK) + return (0); + + if(tcsetattr(fd, TCSAFLUSH, &save_termios) < 0) + return (-1); + + ttystate = RESET; + + return 0; +} + +int +main() +{ + int val; + val = openpty (&masterfd, &slavefd, NULL, NULL, NULL); + if (val == -1) + return -1; + + val = tty_off_xon_xoff (masterfd); + if (val == -1) + return -1; + + signal (SIGWINCH, sigwinch); + signal (SIGINT, sigint); + + val = init_readline (slavefd, slavefd); + if (val == -1) + return -1; + + val = tty_cbreak (STDIN_FILENO); + if (val == -1) + return -1; + + val = main_loop (); + + tty_reset (STDIN_FILENO); + + if (val == -1) + return -1; + + return 0; +} diff --git a/readline/readline/examples/rltest.c b/readline/readline/examples/rltest.c new file mode 100644 index 0000000000..65abe87cc0 --- /dev/null +++ b/readline/readline/examples/rltest.c @@ -0,0 +1,93 @@ +/* **************************************************************** */ +/* */ +/* Testing Readline */ +/* */ +/* **************************************************************** */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +#include +#endif + +#include +#include + +#ifdef HAVE_STDLIB_H +# include +#else +extern void exit(); +#endif + +#ifdef READLINE_LIBRARY +# include "readline.h" +# include "history.h" +#else +# include +# include +#endif + +extern HIST_ENTRY **history_list (); + +int +main () +{ + char *temp, *prompt; + int done; + + temp = (char *)NULL; + prompt = "readline$ "; + done = 0; + + while (!done) + { + temp = readline (prompt); + + /* Test for EOF. */ + if (!temp) + exit (1); + + /* If there is anything on the line, print it and remember it. */ + if (*temp) + { + fprintf (stderr, "%s\r\n", temp); + add_history (temp); + } + + /* Check for `command' that we handle. */ + if (strcmp (temp, "quit") == 0) + done = 1; + + if (strcmp (temp, "list") == 0) + { + HIST_ENTRY **list; + register int i; + + list = history_list (); + if (list) + { + for (i = 0; list[i]; i++) + fprintf (stderr, "%d: %s\r\n", i, list[i]->line); + } + } + free (temp); + } + exit (0); +} diff --git a/readline/readline/examples/rlversion.c b/readline/readline/examples/rlversion.c new file mode 100644 index 0000000000..f36567becf --- /dev/null +++ b/readline/readline/examples/rlversion.c @@ -0,0 +1,49 @@ +/* + * rlversion -- print out readline's version number + */ + +/* Copyright (C) 1987-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library for + reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include "posixstat.h" + +#ifdef HAVE_STDLIB_H +# include +#else +extern void exit(); +#endif + +#ifdef READLINE_LIBRARY +# include "readline.h" +#else +# include +#endif + +int +main() +{ + printf ("%s\n", rl_library_version ? rl_library_version : "unknown"); + exit (0); +} diff --git a/readline/readline/funmap.c b/readline/readline/funmap.c new file mode 100644 index 0000000000..aaf144de99 --- /dev/null +++ b/readline/readline/funmap.c @@ -0,0 +1,269 @@ +/* funmap.c -- attach names to functions. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#if !defined (BUFSIZ) +#include +#endif /* BUFSIZ */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "rlconf.h" +#include "readline.h" + +#include "xmalloc.h" + +#ifdef __STDC__ +typedef int QSFUNC (const void *, const void *); +#else +typedef int QSFUNC (); +#endif + +extern int _rl_qsort_string_compare PARAMS((char **, char **)); + +FUNMAP **funmap; +static int funmap_size; +static int funmap_entry; + +/* After initializing the function map, this is the index of the first + program specific function. */ +int funmap_program_specific_entry_start; + +static const FUNMAP default_funmap[] = { + { "abort", rl_abort }, + { "accept-line", rl_newline }, + { "arrow-key-prefix", rl_arrow_keys }, + { "backward-byte", rl_backward_byte }, + { "backward-char", rl_backward_char }, + { "backward-delete-char", rl_rubout }, + { "backward-kill-line", rl_backward_kill_line }, + { "backward-kill-word", rl_backward_kill_word }, + { "backward-word", rl_backward_word }, + { "beginning-of-history", rl_beginning_of_history }, + { "beginning-of-line", rl_beg_of_line }, + { "bracketed-paste-begin", rl_bracketed_paste_begin }, + { "call-last-kbd-macro", rl_call_last_kbd_macro }, + { "capitalize-word", rl_capitalize_word }, + { "character-search", rl_char_search }, + { "character-search-backward", rl_backward_char_search }, + { "clear-screen", rl_clear_screen }, + { "complete", rl_complete }, + { "copy-backward-word", rl_copy_backward_word }, + { "copy-forward-word", rl_copy_forward_word }, + { "copy-region-as-kill", rl_copy_region_to_kill }, + { "delete-char", rl_delete }, + { "delete-char-or-list", rl_delete_or_show_completions }, + { "delete-horizontal-space", rl_delete_horizontal_space }, + { "digit-argument", rl_digit_argument }, + { "do-lowercase-version", rl_do_lowercase_version }, + { "downcase-word", rl_downcase_word }, + { "dump-functions", rl_dump_functions }, + { "dump-macros", rl_dump_macros }, + { "dump-variables", rl_dump_variables }, + { "emacs-editing-mode", rl_emacs_editing_mode }, + { "end-kbd-macro", rl_end_kbd_macro }, + { "end-of-history", rl_end_of_history }, + { "end-of-line", rl_end_of_line }, + { "exchange-point-and-mark", rl_exchange_point_and_mark }, + { "forward-backward-delete-char", rl_rubout_or_delete }, + { "forward-byte", rl_forward_byte }, + { "forward-char", rl_forward_char }, + { "forward-search-history", rl_forward_search_history }, + { "forward-word", rl_forward_word }, + { "history-search-backward", rl_history_search_backward }, + { "history-search-forward", rl_history_search_forward }, + { "history-substring-search-backward", rl_history_substr_search_backward }, + { "history-substring-search-forward", rl_history_substr_search_forward }, + { "insert-comment", rl_insert_comment }, + { "insert-completions", rl_insert_completions }, + { "kill-whole-line", rl_kill_full_line }, + { "kill-line", rl_kill_line }, + { "kill-region", rl_kill_region }, + { "kill-word", rl_kill_word }, + { "menu-complete", rl_menu_complete }, + { "menu-complete-backward", rl_backward_menu_complete }, + { "next-history", rl_get_next_history }, + { "next-screen-line", rl_next_screen_line }, + { "non-incremental-forward-search-history", rl_noninc_forward_search }, + { "non-incremental-reverse-search-history", rl_noninc_reverse_search }, + { "non-incremental-forward-search-history-again", rl_noninc_forward_search_again }, + { "non-incremental-reverse-search-history-again", rl_noninc_reverse_search_again }, + { "old-menu-complete", rl_old_menu_complete }, + { "overwrite-mode", rl_overwrite_mode }, +#if defined (_WIN32) + { "paste-from-clipboard", rl_paste_from_clipboard }, +#endif + { "possible-completions", rl_possible_completions }, + { "previous-history", rl_get_previous_history }, + { "previous-screen-line", rl_previous_screen_line }, + { "print-last-kbd-macro", rl_print_last_kbd_macro }, + { "quoted-insert", rl_quoted_insert }, + { "re-read-init-file", rl_re_read_init_file }, + { "redraw-current-line", rl_refresh_line}, + { "reverse-search-history", rl_reverse_search_history }, + { "revert-line", rl_revert_line }, + { "self-insert", rl_insert }, + { "set-mark", rl_set_mark }, + { "skip-csi-sequence", rl_skip_csi_sequence }, + { "start-kbd-macro", rl_start_kbd_macro }, + { "tab-insert", rl_tab_insert }, + { "tilde-expand", rl_tilde_expand }, + { "transpose-chars", rl_transpose_chars }, + { "transpose-words", rl_transpose_words }, + { "tty-status", rl_tty_status }, + { "undo", rl_undo_command }, + { "universal-argument", rl_universal_argument }, + { "unix-filename-rubout", rl_unix_filename_rubout }, + { "unix-line-discard", rl_unix_line_discard }, + { "unix-word-rubout", rl_unix_word_rubout }, + { "upcase-word", rl_upcase_word }, + { "yank", rl_yank }, + { "yank-last-arg", rl_yank_last_arg }, + { "yank-nth-arg", rl_yank_nth_arg }, + { "yank-pop", rl_yank_pop }, + +#if defined (VI_MODE) + { "vi-append-eol", rl_vi_append_eol }, + { "vi-append-mode", rl_vi_append_mode }, + { "vi-arg-digit", rl_vi_arg_digit }, + { "vi-back-to-indent", rl_vi_back_to_indent }, + { "vi-backward-bigword", rl_vi_bWord }, + { "vi-backward-word", rl_vi_bword }, + { "vi-bWord", rl_vi_bWord }, + { "vi-bword", rl_vi_bword }, + { "vi-change-case", rl_vi_change_case }, + { "vi-change-char", rl_vi_change_char }, + { "vi-change-to", rl_vi_change_to }, + { "vi-char-search", rl_vi_char_search }, + { "vi-column", rl_vi_column }, + { "vi-complete", rl_vi_complete }, + { "vi-delete", rl_vi_delete }, + { "vi-delete-to", rl_vi_delete_to }, + { "vi-eWord", rl_vi_eWord }, + { "vi-editing-mode", rl_vi_editing_mode }, + { "vi-end-bigword", rl_vi_eWord }, + { "vi-end-word", rl_vi_end_word }, + { "vi-eof-maybe", rl_vi_eof_maybe }, + { "vi-eword", rl_vi_eword }, + { "vi-fWord", rl_vi_fWord }, + { "vi-fetch-history", rl_vi_fetch_history }, + { "vi-first-print", rl_vi_first_print }, + { "vi-forward-bigword", rl_vi_fWord }, + { "vi-forward-word", rl_vi_fword }, + { "vi-fword", rl_vi_fword }, + { "vi-goto-mark", rl_vi_goto_mark }, + { "vi-insert-beg", rl_vi_insert_beg }, + { "vi-insertion-mode", rl_vi_insert_mode }, + { "vi-match", rl_vi_match }, + { "vi-movement-mode", rl_vi_movement_mode }, + { "vi-next-word", rl_vi_next_word }, + { "vi-overstrike", rl_vi_overstrike }, + { "vi-overstrike-delete", rl_vi_overstrike_delete }, + { "vi-prev-word", rl_vi_prev_word }, + { "vi-put", rl_vi_put }, + { "vi-redo", rl_vi_redo }, + { "vi-replace", rl_vi_replace }, + { "vi-rubout", rl_vi_rubout }, + { "vi-search", rl_vi_search }, + { "vi-search-again", rl_vi_search_again }, + { "vi-set-mark", rl_vi_set_mark }, + { "vi-subst", rl_vi_subst }, + { "vi-tilde-expand", rl_vi_tilde_expand }, + { "vi-unix-word-rubout", rl_vi_unix_word_rubout }, + { "vi-yank-arg", rl_vi_yank_arg }, + { "vi-yank-pop", rl_vi_yank_pop }, + { "vi-yank-to", rl_vi_yank_to }, +#endif /* VI_MODE */ + + {(char *)NULL, (rl_command_func_t *)NULL } +}; + +int +rl_add_funmap_entry (const char *name, rl_command_func_t *function) +{ + if (funmap_entry + 2 >= funmap_size) + { + funmap_size += 64; + funmap = (FUNMAP **)xrealloc (funmap, funmap_size * sizeof (FUNMAP *)); + } + + funmap[funmap_entry] = (FUNMAP *)xmalloc (sizeof (FUNMAP)); + funmap[funmap_entry]->name = name; + funmap[funmap_entry]->function = function; + + funmap[++funmap_entry] = (FUNMAP *)NULL; + return funmap_entry; +} + +static int funmap_initialized; + +/* Make the funmap contain all of the default entries. */ +void +rl_initialize_funmap (void) +{ + register int i; + + if (funmap_initialized) + return; + + for (i = 0; default_funmap[i].name; i++) + rl_add_funmap_entry (default_funmap[i].name, default_funmap[i].function); + + funmap_initialized = 1; + funmap_program_specific_entry_start = i; +} + +/* Produce a NULL terminated array of known function names. The array + is sorted. The array itself is allocated, but not the strings inside. + You should free () the array when you done, but not the pointers. */ +const char ** +rl_funmap_names (void) +{ + const char **result; + int result_size, result_index; + + /* Make sure that the function map has been initialized. */ + rl_initialize_funmap (); + + for (result_index = result_size = 0, result = (const char **)NULL; funmap[result_index]; result_index++) + { + if (result_index + 2 > result_size) + { + result_size += 20; + result = (const char **)xrealloc (result, result_size * sizeof (char *)); + } + + result[result_index] = funmap[result_index]->name; + result[result_index + 1] = (char *)NULL; + } + + qsort (result, result_index, sizeof (char *), (QSFUNC *)_rl_qsort_string_compare); + return (result); +} diff --git a/readline/readline/histexpand.c b/readline/readline/histexpand.c new file mode 100644 index 0000000000..adcf5dcb4e --- /dev/null +++ b/readline/readline/histexpand.c @@ -0,0 +1,1685 @@ +/* histexpand.c -- history expansion. */ + +/* Copyright (C) 1989-2018 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# ifndef _MINIX +# include +# endif +# include +#endif + +#include "rlmbutil.h" + +#include "history.h" +#include "histlib.h" +#include "chardefs.h" + +#include "rlshell.h" +#include "xmalloc.h" + +#define HISTORY_WORD_DELIMITERS " \t\n;&()|<>" +#define HISTORY_QUOTE_CHARACTERS "\"'`" +#define HISTORY_EVENT_DELIMITERS "^$*%-" + +#define slashify_in_quotes "\\`\"$" + +#define fielddelim(c) (whitespace(c) || (c) == '\n') + +typedef int _hist_search_func_t PARAMS((const char *, int)); + +static char error_pointer; + +static char *subst_lhs; +static char *subst_rhs; +static int subst_lhs_len; +static int subst_rhs_len; + +/* Characters that delimit history event specifications and separate event + specifications from word designators. Static for now */ +static char *history_event_delimiter_chars = HISTORY_EVENT_DELIMITERS; + +static char *get_history_word_specifier PARAMS((char *, char *, int *)); +static int history_tokenize_word PARAMS((const char *, int)); +static char **history_tokenize_internal PARAMS((const char *, int, int *)); +static char *history_substring PARAMS((const char *, int, int)); +static void freewords PARAMS((char **, int)); +static char *history_find_word PARAMS((char *, int)); + +static char *quote_breaks PARAMS((char *)); + +/* Variables exported by this file. */ +/* The character that represents the start of a history expansion + request. This is usually `!'. */ +char history_expansion_char = '!'; + +/* The character that invokes word substitution if found at the start of + a line. This is usually `^'. */ +char history_subst_char = '^'; + +/* During tokenization, if this character is seen as the first character + of a word, then it, and all subsequent characters upto a newline are + ignored. For a Bourne shell, this should be '#'. Bash special cases + the interactive comment character to not be a comment delimiter. */ +char history_comment_char = '\0'; + +/* The list of characters which inhibit the expansion of text if found + immediately following history_expansion_char. */ +char *history_no_expand_chars = " \t\n\r="; + +/* If set to a non-zero value, single quotes inhibit history expansion. + The default is 0. */ +int history_quotes_inhibit_expansion = 0; + +/* Used to split words by history_tokenize_internal. */ +char *history_word_delimiters = HISTORY_WORD_DELIMITERS; + +/* If set, this points to a function that is called to verify that a + particular history expansion should be performed. */ +rl_linebuf_func_t *history_inhibit_expansion_function; + +int history_quoting_state = 0; + +/* **************************************************************** */ +/* */ +/* History Expansion */ +/* */ +/* **************************************************************** */ + +/* Hairy history expansion on text, not tokens. This is of general + use, and thus belongs in this library. */ + +/* The last string searched for by a !?string? search. */ +static char *search_string; +/* The last string matched by a !?string? search. */ +static char *search_match; + +/* Return the event specified at TEXT + OFFSET modifying OFFSET to + point to after the event specifier. Just a pointer to the history + line is returned; NULL is returned in the event of a bad specifier. + You pass STRING with *INDEX equal to the history_expansion_char that + begins this specification. + DELIMITING_QUOTE is a character that is allowed to end the string + specification for what to search for in addition to the normal + characters `:', ` ', `\t', `\n', and sometimes `?'. + So you might call this function like: + line = get_history_event ("!echo:p", &index, 0); */ +char * +get_history_event (const char *string, int *caller_index, int delimiting_quote) +{ + register int i; + register char c; + HIST_ENTRY *entry; + int which, sign, local_index, substring_okay; + _hist_search_func_t *search_func; + char *temp; + + /* The event can be specified in a number of ways. + + !! the previous command + !n command line N + !-n current command-line minus N + !str the most recent command starting with STR + !?str[?] + the most recent command containing STR + + All values N are determined via HISTORY_BASE. */ + + i = *caller_index; + + if (string[i] != history_expansion_char) + return ((char *)NULL); + + /* Move on to the specification. */ + i++; + + sign = 1; + substring_okay = 0; + +#define RETURN_ENTRY(e, w) \ + return ((e = history_get (w)) ? e->line : (char *)NULL) + + /* Handle !! case. */ + if (string[i] == history_expansion_char) + { + i++; + which = history_base + (history_length - 1); + *caller_index = i; + RETURN_ENTRY (entry, which); + } + + /* Hack case of numeric line specification. */ + if (string[i] == '-') + { + sign = -1; + i++; + } + + if (_rl_digit_p (string[i])) + { + /* Get the extent of the digits and compute the value. */ + for (which = 0; _rl_digit_p (string[i]); i++) + which = (which * 10) + _rl_digit_value (string[i]); + + *caller_index = i; + + if (sign < 0) + which = (history_length + history_base) - which; + + RETURN_ENTRY (entry, which); + } + + /* This must be something to search for. If the spec begins with + a '?', then the string may be anywhere on the line. Otherwise, + the string must be found at the start of a line. */ + if (string[i] == '?') + { + substring_okay++; + i++; + } + + /* Only a closing `?' or a newline delimit a substring search string. */ + for (local_index = i; c = string[i]; i++) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + int v; + mbstate_t ps; + + memset (&ps, 0, sizeof (mbstate_t)); + /* These produce warnings because we're passing a const string to a + function that takes a non-const string. */ + _rl_adjust_point ((char *)string, i, &ps); + if ((v = _rl_get_char_len ((char *)string + i, &ps)) > 1) + { + i += v - 1; + continue; + } + } + +#endif /* HANDLE_MULTIBYTE */ + if ((!substring_okay && (whitespace (c) || c == ':' || + (history_event_delimiter_chars && member (c, history_event_delimiter_chars)) || + (history_search_delimiter_chars && member (c, history_search_delimiter_chars)) || + string[i] == delimiting_quote)) || + string[i] == '\n' || + (substring_okay && string[i] == '?')) + break; + } + + which = i - local_index; + temp = (char *)xmalloc (1 + which); + if (which) + strncpy (temp, string + local_index, which); + temp[which] = '\0'; + + if (substring_okay && string[i] == '?') + i++; + + *caller_index = i; + +#define FAIL_SEARCH() \ + do { \ + history_offset = history_length; xfree (temp) ; return (char *)NULL; \ + } while (0) + + /* If there is no search string, try to use the previous search string, + if one exists. If not, fail immediately. */ + if (*temp == '\0' && substring_okay) + { + if (search_string) + { + xfree (temp); + temp = savestring (search_string); + } + else + FAIL_SEARCH (); + } + + search_func = substring_okay ? history_search : history_search_prefix; + while (1) + { + local_index = (*search_func) (temp, -1); + + if (local_index < 0) + FAIL_SEARCH (); + + if (local_index == 0 || substring_okay) + { + entry = current_history (); + if (entry == 0) + FAIL_SEARCH (); + history_offset = history_length; + + /* If this was a substring search, then remember the + string that we matched for word substitution. */ + if (substring_okay) + { + FREE (search_string); + search_string = temp; + + FREE (search_match); + search_match = history_find_word (entry->line, local_index); + } + else + xfree (temp); + + return (entry->line); + } + + if (history_offset) + history_offset--; + else + FAIL_SEARCH (); + } +#undef FAIL_SEARCH +#undef RETURN_ENTRY +} + +/* Function for extracting single-quoted strings. Used for inhibiting + history expansion within single quotes. */ + +/* Extract the contents of STRING as if it is enclosed in single quotes. + SINDEX, when passed in, is the offset of the character immediately + following the opening single quote; on exit, SINDEX is left pointing + to the closing single quote. FLAGS currently used to allow backslash + to escape a single quote (e.g., for bash $'...'). */ +static void +hist_string_extract_single_quoted (char *string, int *sindex, int flags) +{ + register int i; + + for (i = *sindex; string[i] && string[i] != '\''; i++) + { + if ((flags & 1) && string[i] == '\\' && string[i+1]) + i++; + } + + *sindex = i; +} + +static char * +quote_breaks (char *s) +{ + register char *p, *r; + char *ret; + int len = 3; + + for (p = s; p && *p; p++, len++) + { + if (*p == '\'') + len += 3; + else if (whitespace (*p) || *p == '\n') + len += 2; + } + + r = ret = (char *)xmalloc (len); + *r++ = '\''; + for (p = s; p && *p; ) + { + if (*p == '\'') + { + *r++ = '\''; + *r++ = '\\'; + *r++ = '\''; + *r++ = '\''; + p++; + } + else if (whitespace (*p) || *p == '\n') + { + *r++ = '\''; + *r++ = *p++; + *r++ = '\''; + } + else + *r++ = *p++; + } + *r++ = '\''; + *r = '\0'; + return ret; +} + +static char * +hist_error(char *s, int start, int current, int errtype) +{ + char *temp; + const char *emsg; + int ll, elen; + + ll = current - start; + + switch (errtype) + { + case EVENT_NOT_FOUND: + emsg = "event not found"; + elen = 15; + break; + case BAD_WORD_SPEC: + emsg = "bad word specifier"; + elen = 18; + break; + case SUBST_FAILED: + emsg = "substitution failed"; + elen = 19; + break; + case BAD_MODIFIER: + emsg = "unrecognized history modifier"; + elen = 29; + break; + case NO_PREV_SUBST: + emsg = "no previous substitution"; + elen = 24; + break; + default: + emsg = "unknown expansion error"; + elen = 23; + break; + } + + temp = (char *)xmalloc (ll + elen + 3); + strncpy (temp, s + start, ll); + temp[ll] = ':'; + temp[ll + 1] = ' '; + strcpy (temp + ll + 2, emsg); + return (temp); +} + +/* Get a history substitution string from STR starting at *IPTR + and return it. The length is returned in LENPTR. + + A backslash can quote the delimiter. If the string is the + empty string, the previous pattern is used. If there is + no previous pattern for the lhs, the last history search + string is used. + + If IS_RHS is 1, we ignore empty strings and set the pattern + to "" anyway. subst_lhs is not changed if the lhs is empty; + subst_rhs is allowed to be set to the empty string. */ + +static char * +get_subst_pattern (char *str, int *iptr, int delimiter, int is_rhs, int *lenptr) +{ + register int si, i, j, k; + char *s; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps; +#endif + + s = (char *)NULL; + i = *iptr; + +#if defined (HANDLE_MULTIBYTE) + memset (&ps, 0, sizeof (mbstate_t)); + _rl_adjust_point (str, i, &ps); +#endif + + for (si = i; str[si] && str[si] != delimiter; si++) +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + int v; + if ((v = _rl_get_char_len (str + si, &ps)) > 1) + si += v - 1; + else if (str[si] == '\\' && str[si + 1] == delimiter) + si++; + } + else +#endif /* HANDLE_MULTIBYTE */ + if (str[si] == '\\' && str[si + 1] == delimiter) + si++; + + if (si > i || is_rhs) + { + s = (char *)xmalloc (si - i + 1); + for (j = 0, k = i; k < si; j++, k++) + { + /* Remove a backslash quoting the search string delimiter. */ + if (str[k] == '\\' && str[k + 1] == delimiter) + k++; + s[j] = str[k]; + } + s[j] = '\0'; + if (lenptr) + *lenptr = j; + } + + i = si; + if (str[i]) + i++; + *iptr = i; + + return s; +} + +static void +postproc_subst_rhs (void) +{ + char *new; + int i, j, new_size; + + new = (char *)xmalloc (new_size = subst_rhs_len + subst_lhs_len); + for (i = j = 0; i < subst_rhs_len; i++) + { + if (subst_rhs[i] == '&') + { + if (j + subst_lhs_len >= new_size) + new = (char *)xrealloc (new, (new_size = new_size * 2 + subst_lhs_len)); + strcpy (new + j, subst_lhs); + j += subst_lhs_len; + } + else + { + /* a single backslash protects the `&' from lhs interpolation */ + if (subst_rhs[i] == '\\' && subst_rhs[i + 1] == '&') + i++; + if (j >= new_size) + new = (char *)xrealloc (new, new_size *= 2); + new[j++] = subst_rhs[i]; + } + } + new[j] = '\0'; + xfree (subst_rhs); + subst_rhs = new; + subst_rhs_len = j; +} + +/* Expand the bulk of a history specifier starting at STRING[START]. + Returns 0 if everything is OK, -1 if an error occurred, and 1 + if the `p' modifier was supplied and the caller should just print + the returned string. Returns the new index into string in + *END_INDEX_PTR, and the expanded specifier in *RET_STRING. */ +/* need current line for !# */ +static int +history_expand_internal (char *string, int start, int qc, int *end_index_ptr, char **ret_string, char *current_line) +{ + int i, n, starting_index; + int substitute_globally, subst_bywords, want_quotes, print_only; + char *event, *temp, *result, *tstr, *t, c, *word_spec; + int result_len; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps; + + memset (&ps, 0, sizeof (mbstate_t)); +#endif + + result = (char *)xmalloc (result_len = 128); + + i = start; + + /* If it is followed by something that starts a word specifier, + then !! is implied as the event specifier. */ + + if (member (string[i + 1], ":$*%^")) + { + char fake_s[3]; + int fake_i = 0; + i++; + fake_s[0] = fake_s[1] = history_expansion_char; + fake_s[2] = '\0'; + event = get_history_event (fake_s, &fake_i, 0); + } + else if (string[i + 1] == '#') + { + i += 2; + event = current_line; + } + else + event = get_history_event (string, &i, qc); + + if (event == 0) + { + *ret_string = hist_error (string, start, i, EVENT_NOT_FOUND); + xfree (result); + return (-1); + } + + /* If a word specifier is found, then do what that requires. */ + starting_index = i; + word_spec = get_history_word_specifier (string, event, &i); + + /* There is no such thing as a `malformed word specifier'. However, + it is possible for a specifier that has no match. In that case, + we complain. */ + if (word_spec == (char *)&error_pointer) + { + *ret_string = hist_error (string, starting_index, i, BAD_WORD_SPEC); + xfree (result); + return (-1); + } + + /* If no word specifier, than the thing of interest was the event. */ + temp = word_spec ? savestring (word_spec) : savestring (event); + FREE (word_spec); + + /* Perhaps there are other modifiers involved. Do what they say. */ + want_quotes = substitute_globally = subst_bywords = print_only = 0; + starting_index = i; + + while (string[i] == ':') + { + c = string[i + 1]; + + if (c == 'g' || c == 'a') + { + substitute_globally = 1; + i++; + c = string[i + 1]; + } + else if (c == 'G') + { + subst_bywords = 1; + i++; + c = string[i + 1]; + } + + switch (c) + { + default: + *ret_string = hist_error (string, i+1, i+2, BAD_MODIFIER); + xfree (result); + xfree (temp); + return -1; + + case 'q': + want_quotes = 'q'; + break; + + case 'x': + want_quotes = 'x'; + break; + + /* :p means make this the last executed line. So we + return an error state after adding this line to the + history. */ + case 'p': + print_only++; + break; + + /* :t discards all but the last part of the pathname. */ + case 't': + tstr = strrchr (temp, '/'); + if (tstr) + { + tstr++; + t = savestring (tstr); + xfree (temp); + temp = t; + } + break; + + /* :h discards the last part of a pathname. */ + case 'h': + tstr = strrchr (temp, '/'); + if (tstr) + *tstr = '\0'; + break; + + /* :r discards the suffix. */ + case 'r': + tstr = strrchr (temp, '.'); + if (tstr) + *tstr = '\0'; + break; + + /* :e discards everything but the suffix. */ + case 'e': + tstr = strrchr (temp, '.'); + if (tstr) + { + t = savestring (tstr); + xfree (temp); + temp = t; + } + break; + + /* :s/this/that substitutes `that' for the first + occurrence of `this'. :gs/this/that substitutes `that' + for each occurrence of `this'. :& repeats the last + substitution. :g& repeats the last substitution + globally. */ + + case '&': + case 's': + { + char *new_event; + int delimiter, failed, si, l_temp, ws, we; + + if (c == 's') + { + if (i + 2 < (int)strlen (string)) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + _rl_adjust_point (string, i + 2, &ps); + if (_rl_get_char_len (string + i + 2, &ps) > 1) + delimiter = 0; + else + delimiter = string[i + 2]; + } + else +#endif /* HANDLE_MULTIBYTE */ + delimiter = string[i + 2]; + } + else + break; /* no search delimiter */ + + i += 3; + + t = get_subst_pattern (string, &i, delimiter, 0, &subst_lhs_len); + /* An empty substitution lhs with no previous substitution + uses the last search string as the lhs. */ + if (t) + { + FREE (subst_lhs); + subst_lhs = t; + } + else if (!subst_lhs) + { + if (search_string && *search_string) + { + subst_lhs = savestring (search_string); + subst_lhs_len = strlen (subst_lhs); + } + else + { + subst_lhs = (char *) NULL; + subst_lhs_len = 0; + } + } + + FREE (subst_rhs); + subst_rhs = get_subst_pattern (string, &i, delimiter, 1, &subst_rhs_len); + + /* If `&' appears in the rhs, it's supposed to be replaced + with the lhs. */ + if (member ('&', subst_rhs)) + postproc_subst_rhs (); + } + else + i += 2; + + /* If there is no lhs, the substitution can't succeed. */ + if (subst_lhs_len == 0) + { + *ret_string = hist_error (string, starting_index, i, NO_PREV_SUBST); + xfree (result); + xfree (temp); + return -1; + } + + l_temp = strlen (temp); + /* Ignore impossible cases. */ + if (subst_lhs_len > l_temp) + { + *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); + xfree (result); + xfree (temp); + return (-1); + } + + /* Find the first occurrence of THIS in TEMP. */ + /* Substitute SUBST_RHS for SUBST_LHS in TEMP. There are three + cases to consider: + + 1. substitute_globally == subst_bywords == 0 + 2. substitute_globally == 1 && subst_bywords == 0 + 3. substitute_globally == 0 && subst_bywords == 1 + + In the first case, we substitute for the first occurrence only. + In the second case, we substitute for every occurrence. + In the third case, we tokenize into words and substitute the + first occurrence of each word. */ + + si = we = 0; + for (failed = 1; (si + subst_lhs_len) <= l_temp; si++) + { + /* First skip whitespace and find word boundaries if + we're past the end of the word boundary we found + the last time. */ + if (subst_bywords && si > we) + { + for (; temp[si] && fielddelim (temp[si]); si++) + ; + ws = si; + we = history_tokenize_word (temp, si); + } + + if (STREQN (temp+si, subst_lhs, subst_lhs_len)) + { + int len = subst_rhs_len - subst_lhs_len + l_temp; + new_event = (char *)xmalloc (1 + len); + strncpy (new_event, temp, si); + strncpy (new_event + si, subst_rhs, subst_rhs_len); + strncpy (new_event + si + subst_rhs_len, + temp + si + subst_lhs_len, + l_temp - (si + subst_lhs_len)); + new_event[len] = '\0'; + xfree (temp); + temp = new_event; + + failed = 0; + + if (substitute_globally) + { + /* Reported to fix a bug that causes it to skip every + other match when matching a single character. Was + si += subst_rhs_len previously. */ + si += subst_rhs_len - 1; + l_temp = strlen (temp); + substitute_globally++; + continue; + } + else if (subst_bywords) + { + si = we; + l_temp = strlen (temp); + continue; + } + else + break; + } + } + + if (substitute_globally > 1) + { + substitute_globally = 0; + continue; /* don't want to increment i */ + } + + if (failed == 0) + continue; /* don't want to increment i */ + + *ret_string = hist_error (string, starting_index, i, SUBST_FAILED); + xfree (result); + xfree (temp); + return (-1); + } + } + i += 2; + } + /* Done with modifiers. */ + /* Believe it or not, we have to back the pointer up by one. */ + --i; + + if (want_quotes) + { + char *x; + + if (want_quotes == 'q') + x = sh_single_quote (temp); + else if (want_quotes == 'x') + x = quote_breaks (temp); + else + x = savestring (temp); + + xfree (temp); + temp = x; + } + + n = strlen (temp); + if (n >= result_len) + result = (char *)xrealloc (result, n + 2); + strcpy (result, temp); + xfree (temp); + + *end_index_ptr = i; + *ret_string = result; + return (print_only); +} + +/* Expand the string STRING, placing the result into OUTPUT, a pointer + to a string. Returns: + + -1) If there was an error in expansion. + 0) If no expansions took place (or, if the only change in + the text was the de-slashifying of the history expansion + character) + 1) If expansions did take place + 2) If the `p' modifier was given and the caller should print the result + + If an error occurred in expansion, then OUTPUT contains a descriptive + error message. */ + +#define ADD_STRING(s) \ + do \ + { \ + int sl = strlen (s); \ + j += sl; \ + if (j >= result_len) \ + { \ + while (j >= result_len) \ + result_len += 128; \ + result = (char *)xrealloc (result, result_len); \ + } \ + strcpy (result + j - sl, s); \ + } \ + while (0) + +#define ADD_CHAR(c) \ + do \ + { \ + if (j >= result_len - 1) \ + result = (char *)xrealloc (result, result_len += 64); \ + result[j++] = c; \ + result[j] = '\0'; \ + } \ + while (0) + +int +history_expand (char *hstring, char **output) +{ + register int j; + int i, r, l, passc, cc, modified, eindex, only_printing, dquote, squote, flag; + char *string; + + /* The output string, and its length. */ + int result_len; + char *result; + +#if defined (HANDLE_MULTIBYTE) + char mb[MB_LEN_MAX]; + mbstate_t ps; +#endif + + /* Used when adding the string. */ + char *temp; + + if (output == 0) + return 0; + + /* Setting the history expansion character to 0 inhibits all + history expansion. */ + if (history_expansion_char == 0) + { + *output = savestring (hstring); + return (0); + } + + /* Prepare the buffer for printing error messages. */ + result = (char *)xmalloc (result_len = 256); + result[0] = '\0'; + + only_printing = modified = 0; + l = strlen (hstring); + + /* Grovel the string. Only backslash and single quotes can quote the + history escape character. We also handle arg specifiers. */ + + /* Before we grovel forever, see if the history_expansion_char appears + anywhere within the text. */ + + /* The quick substitution character is a history expansion all right. That + is to say, "^this^that^" is equivalent to "!!:s^this^that^", and in fact, + that is the substitution that we do. */ + if (hstring[0] == history_subst_char) + { + string = (char *)xmalloc (l + 5); + + string[0] = string[1] = history_expansion_char; + string[2] = ':'; + string[3] = 's'; + strcpy (string + 4, hstring); + l += 4; + } + else + { +#if defined (HANDLE_MULTIBYTE) + memset (&ps, 0, sizeof (mbstate_t)); +#endif + + string = hstring; + /* If not quick substitution, still maybe have to do expansion. */ + + /* `!' followed by one of the characters in history_no_expand_chars + is NOT an expansion. */ + dquote = history_quoting_state == '"'; + squote = history_quoting_state == '\''; + + /* If the calling application tells us we are already reading a + single-quoted string, consume the rest of the string right now + and then go on. */ + i = 0; + if (squote && history_quotes_inhibit_expansion) + { + hist_string_extract_single_quoted (string, &i, 0); + squote = 0; + if (string[i]) + i++; + } + + for ( ; string[i]; i++) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + int v; + v = _rl_get_char_len (string + i, &ps); + if (v > 1) + { + i += v - 1; + continue; + } + } +#endif /* HANDLE_MULTIBYTE */ + + cc = string[i + 1]; + /* The history_comment_char, if set, appearing at the beginning + of a word signifies that the rest of the line should not have + history expansion performed on it. + Skip the rest of the line and break out of the loop. */ + if (history_comment_char && string[i] == history_comment_char && + dquote == 0 && + (i == 0 || member (string[i - 1], history_word_delimiters))) + { + while (string[i]) + i++; + break; + } + else if (string[i] == history_expansion_char) + { + if (cc == 0 || member (cc, history_no_expand_chars)) + continue; + /* DQUOTE won't be set unless history_quotes_inhibit_expansion + is set. The idea here is to treat double-quoted strings the + same as the word outside double quotes; in effect making the + double quote part of history_no_expand_chars when DQUOTE is + set. */ + else if (dquote && cc == '"') + continue; + /* If the calling application has set + history_inhibit_expansion_function to a function that checks + for special cases that should not be history expanded, + call the function and skip the expansion if it returns a + non-zero value. */ + else if (history_inhibit_expansion_function && + (*history_inhibit_expansion_function) (string, i)) + continue; + else + break; + } + /* Shell-like quoting: allow backslashes to quote double quotes + inside a double-quoted string. */ + else if (dquote && string[i] == '\\' && cc == '"') + i++; + /* More shell-like quoting: if we're paying attention to single + quotes and letting them quote the history expansion character, + then we need to pay attention to double quotes, because single + quotes are not special inside double-quoted strings. */ + else if (history_quotes_inhibit_expansion && string[i] == '"') + { + dquote = 1 - dquote; + } + else if (dquote == 0 && history_quotes_inhibit_expansion && string[i] == '\'') + { + /* If this is bash, single quotes inhibit history expansion. */ + flag = (i > 0 && string[i - 1] == '$'); + i++; + hist_string_extract_single_quoted (string, &i, flag); + } + else if (history_quotes_inhibit_expansion && string[i] == '\\') + { + /* If this is bash, allow backslashes to quote single + quotes and the history expansion character. */ + if (cc == '\'' || cc == history_expansion_char) + i++; + } + + } + + if (string[i] != history_expansion_char) + { + xfree (result); + *output = savestring (string); + return (0); + } + } + + /* Extract and perform the substitution. */ + dquote = history_quoting_state == '"'; + squote = history_quoting_state == '\''; + + /* If the calling application tells us we are already reading a + single-quoted string, consume the rest of the string right now + and then go on. */ + i = j = 0; + if (squote && history_quotes_inhibit_expansion) + { + int c; + + hist_string_extract_single_quoted (string, &i, 0); + squote = 0; + for (c = 0; c < i; c++) + ADD_CHAR (string[c]); + if (string[i]) + { + ADD_CHAR (string[i]); + i++; + } + } + + for (passc = 0; i < l; i++) + { + int qc, tchar = string[i]; + + if (passc) + { + passc = 0; + ADD_CHAR (tchar); + continue; + } + +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + int k, c; + + c = tchar; + memset (mb, 0, sizeof (mb)); + for (k = 0; k < MB_LEN_MAX; k++) + { + mb[k] = (char)c; + memset (&ps, 0, sizeof (mbstate_t)); + if (_rl_get_char_len (mb, &ps) == -2) + c = string[++i]; + else + break; + } + if (strlen (mb) > 1) + { + ADD_STRING (mb); + continue; + } + } +#endif /* HANDLE_MULTIBYTE */ + + if (tchar == history_expansion_char) + tchar = -3; + else if (tchar == history_comment_char) + tchar = -2; + + switch (tchar) + { + default: + ADD_CHAR (string[i]); + break; + + case '\\': + passc++; + ADD_CHAR (tchar); + break; + + case '"': + dquote = 1 - dquote; + ADD_CHAR (tchar); + break; + + case '\'': + { + /* If history_quotes_inhibit_expansion is set, single quotes + inhibit history expansion, otherwise they are treated like + double quotes. */ + if (squote) + { + squote = 0; + ADD_CHAR (tchar); + } + else if (dquote == 0 && history_quotes_inhibit_expansion) + { + int quote, slen; + + flag = (i > 0 && string[i - 1] == '$'); + quote = i++; + hist_string_extract_single_quoted (string, &i, flag); + + slen = i - quote + 2; + temp = (char *)xmalloc (slen); + strncpy (temp, string + quote, slen); + temp[slen - 1] = '\0'; + ADD_STRING (temp); + xfree (temp); + } + else if (dquote == 0 && squote == 0 && history_quotes_inhibit_expansion == 0) + { + squote = 1; + ADD_CHAR (string[i]); + } + else + ADD_CHAR (string[i]); + break; + } + + case -2: /* history_comment_char */ + if ((dquote == 0 || history_quotes_inhibit_expansion == 0) && + (i == 0 || member (string[i - 1], history_word_delimiters))) + { + temp = (char *)xmalloc (l - i + 1); + strcpy (temp, string + i); + ADD_STRING (temp); + xfree (temp); + i = l; + } + else + ADD_CHAR (string[i]); + break; + + case -3: /* history_expansion_char */ + cc = string[i + 1]; + + /* If the history_expansion_char is followed by one of the + characters in history_no_expand_chars, then it is not a + candidate for expansion of any kind. */ + if (cc == 0 || member (cc, history_no_expand_chars) || + (dquote && cc == '"') || + (history_inhibit_expansion_function && (*history_inhibit_expansion_function) (string, i))) + { + ADD_CHAR (string[i]); + break; + } + +#if defined (NO_BANG_HASH_MODIFIERS) + /* There is something that is listed as a `word specifier' in csh + documentation which means `the expanded text to this point'. + That is not a word specifier, it is an event specifier. If we + don't want to allow modifiers with `!#', just stick the current + output line in again. */ + if (cc == '#') + { + if (result) + { + temp = (char *)xmalloc (1 + strlen (result)); + strcpy (temp, result); + ADD_STRING (temp); + xfree (temp); + } + i++; + break; + } +#endif + qc = squote ? '\'' : (dquote ? '"' : 0); + r = history_expand_internal (string, i, qc, &eindex, &temp, result); + if (r < 0) + { + *output = temp; + xfree (result); + if (string != hstring) + xfree (string); + return -1; + } + else + { + if (temp) + { + modified++; + if (*temp) + ADD_STRING (temp); + xfree (temp); + } + only_printing += r == 1; + i = eindex; + } + break; + } + } + + *output = result; + if (string != hstring) + xfree (string); + + if (only_printing) + { +#if 0 + add_history (result); +#endif + return (2); + } + + return (modified != 0); +} + +/* Return a consed string which is the word specified in SPEC, and found + in FROM. NULL is returned if there is no spec. The address of + ERROR_POINTER is returned if the word specified cannot be found. + CALLER_INDEX is the offset in SPEC to start looking; it is updated + to point to just after the last character parsed. */ +static char * +get_history_word_specifier (char *spec, char *from, int *caller_index) +{ + register int i = *caller_index; + int first, last; + int expecting_word_spec = 0; + char *result; + + /* The range of words to return doesn't exist yet. */ + first = last = 0; + result = (char *)NULL; + + /* If we found a colon, then this *must* be a word specification. If + it isn't, then it is an error. */ + if (spec[i] == ':') + { + i++; + expecting_word_spec++; + } + + /* Handle special cases first. */ + + /* `%' is the word last searched for. */ + if (spec[i] == '%') + { + *caller_index = i + 1; + return (search_match ? savestring (search_match) : savestring ("")); + } + + /* `*' matches all of the arguments, but not the command. */ + if (spec[i] == '*') + { + *caller_index = i + 1; + result = history_arg_extract (1, '$', from); + return (result ? result : savestring ("")); + } + + /* `$' is last arg. */ + if (spec[i] == '$') + { + *caller_index = i + 1; + return (history_arg_extract ('$', '$', from)); + } + + /* Try to get FIRST and LAST figured out. */ + + if (spec[i] == '-') + first = 0; + else if (spec[i] == '^') + { + first = 1; + i++; + } + else if (_rl_digit_p (spec[i]) && expecting_word_spec) + { + for (first = 0; _rl_digit_p (spec[i]); i++) + first = (first * 10) + _rl_digit_value (spec[i]); + } + else + return ((char *)NULL); /* no valid `first' for word specifier */ + + if (spec[i] == '^' || spec[i] == '*') + { + last = (spec[i] == '^') ? 1 : '$'; /* x* abbreviates x-$ */ + i++; + } + else if (spec[i] != '-') + last = first; + else + { + i++; + + if (_rl_digit_p (spec[i])) + { + for (last = 0; _rl_digit_p (spec[i]); i++) + last = (last * 10) + _rl_digit_value (spec[i]); + } + else if (spec[i] == '$') + { + i++; + last = '$'; + } +#if 0 + else if (!spec[i] || spec[i] == ':') + /* check against `:' because there could be a modifier separator */ +#else + else + /* csh seems to allow anything to terminate the word spec here, + leaving it as an abbreviation. */ +#endif + last = -1; /* x- abbreviates x-$ omitting word `$' */ + } + + *caller_index = i; + + if (last >= first || last == '$' || last < 0) + result = history_arg_extract (first, last, from); + + return (result ? result : (char *)&error_pointer); +} + +/* Extract the args specified, starting at FIRST, and ending at LAST. + The args are taken from STRING. If either FIRST or LAST is < 0, + then make that arg count from the right (subtract from the number of + tokens, so that FIRST = -1 means the next to last token on the line). + If LAST is `$' the last arg from STRING is used. */ +char * +history_arg_extract (int first, int last, const char *string) +{ + register int i, len; + char *result; + int size, offset; + char **list; + + /* XXX - think about making history_tokenize return a struct array, + each struct in array being a string and a length to avoid the + calls to strlen below. */ + if ((list = history_tokenize (string)) == NULL) + return ((char *)NULL); + + for (len = 0; list[len]; len++) + ; + + if (last < 0) + last = len + last - 1; + + if (first < 0) + first = len + first - 1; + + if (last == '$') + last = len - 1; + + if (first == '$') + first = len - 1; + + last++; + + if (first >= len || last > len || first < 0 || last < 0 || first > last) + result = ((char *)NULL); + else + { + for (size = 0, i = first; i < last; i++) + size += strlen (list[i]) + 1; + result = (char *)xmalloc (size + 1); + result[0] = '\0'; + + for (i = first, offset = 0; i < last; i++) + { + strcpy (result + offset, list[i]); + offset += strlen (list[i]); + if (i + 1 < last) + { + result[offset++] = ' '; + result[offset] = 0; + } + } + } + + for (i = 0; i < len; i++) + xfree (list[i]); + xfree (list); + + return (result); +} + +static int +history_tokenize_word (const char *string, int ind) +{ + register int i, j; + int delimiter, nestdelim, delimopen; + + i = ind; + delimiter = nestdelim = 0; + + if (member (string[i], "()\n")) /* XXX - included \n, but why? been here forever */ + { + i++; + return i; + } + + if (ISDIGIT (string[i])) + { + j = i; + while (string[j] && ISDIGIT (string[j])) + j++; + if (string[j] == 0) + return (j); + if (string[j] == '<' || string[j] == '>') + i = j; /* digit sequence is a file descriptor */ + else + { + i = j; + goto get_word; /* digit sequence is part of a word */ + } + } + + if (member (string[i], "<>;&|")) + { + int peek = string[i + 1]; + + if (peek == string[i]) + { + if (peek == '<' && string[i + 2] == '-') + i++; + else if (peek == '<' && string[i + 2] == '<') + i++; + i += 2; + return i; + } + else if (peek == '&' && (string[i] == '>' || string[i] == '<')) + { + j = i + 2; + while (string[j] && ISDIGIT (string[j])) /* file descriptor */ + j++; + if (string[j] =='-') /* <&[digits]-, >&[digits]- */ + j++; + return j; + } + else if ((peek == '>' && string[i] == '&') || (peek == '|' && string[i] == '>')) + { + i += 2; + return i; + } + /* XXX - process substitution -- separated out for later -- bash-4.2 */ + else if (peek == '(' && (string[i] == '>' || string[i] == '<')) /*)*/ + { + i += 2; + delimopen = '('; + delimiter = ')'; + nestdelim = 1; + goto get_word; + } + + i++; + return i; + } + +get_word: + /* Get word from string + i; */ + + if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS)) + delimiter = string[i++]; + + for (; string[i]; i++) + { + if (string[i] == '\\' && string[i + 1] == '\n') + { + i++; + continue; + } + + if (string[i] == '\\' && delimiter != '\'' && + (delimiter != '"' || member (string[i], slashify_in_quotes))) + { + i++; + continue; + } + + /* delimiter must be set and set to something other than a quote if + nestdelim is set, so these tests are safe. */ + if (nestdelim && string[i] == delimopen) + { + nestdelim++; + continue; + } + if (nestdelim && string[i] == delimiter) + { + nestdelim--; + if (nestdelim == 0) + delimiter = 0; + continue; + } + + if (delimiter && string[i] == delimiter) + { + delimiter = 0; + continue; + } + + /* Command and process substitution; shell extended globbing patterns */ + if (nestdelim == 0 && delimiter == 0 && member (string[i], "<>$!@?+*") && string[i+1] == '(') /*)*/ + { + i += 2; + delimopen = '('; + delimiter = ')'; + nestdelim = 1; + continue; + } + + if (delimiter == 0 && (member (string[i], history_word_delimiters))) + break; + + if (delimiter == 0 && member (string[i], HISTORY_QUOTE_CHARACTERS)) + delimiter = string[i]; + } + + return i; +} + +static char * +history_substring (const char *string, int start, int end) +{ + register int len; + register char *result; + + len = end - start; + result = (char *)xmalloc (len + 1); + strncpy (result, string + start, len); + result[len] = '\0'; + return result; +} + +/* Parse STRING into tokens and return an array of strings. If WIND is + not -1 and INDP is not null, we also want the word surrounding index + WIND. The position in the returned array of strings is returned in + *INDP. */ +static char ** +history_tokenize_internal (const char *string, int wind, int *indp) +{ + char **result; + register int i, start, result_index, size; + + /* If we're searching for a string that's not part of a word (e.g., " "), + make sure we set *INDP to a reasonable value. */ + if (indp && wind != -1) + *indp = -1; + + /* Get a token, and stuff it into RESULT. The tokens are split + exactly where the shell would split them. */ + for (i = result_index = size = 0, result = (char **)NULL; string[i]; ) + { + /* Skip leading whitespace. */ + for (; string[i] && fielddelim (string[i]); i++) + ; + if (string[i] == 0 || string[i] == history_comment_char) + return (result); + + start = i; + + i = history_tokenize_word (string, start); + + /* If we have a non-whitespace delimiter character (which would not be + skipped by the loop above), use it and any adjacent delimiters to + make a separate field. Any adjacent white space will be skipped the + next time through the loop. */ + if (i == start && history_word_delimiters) + { + i++; + while (string[i] && member (string[i], history_word_delimiters)) + i++; + } + + /* If we are looking for the word in which the character at a + particular index falls, remember it. */ + if (indp && wind != -1 && wind >= start && wind < i) + *indp = result_index; + + if (result_index + 2 >= size) + result = (char **)xrealloc (result, ((size += 10) * sizeof (char *))); + + result[result_index++] = history_substring (string, start, i); + result[result_index] = (char *)NULL; + } + + return (result); +} + +/* Return an array of tokens, much as the shell might. The tokens are + parsed out of STRING. */ +char ** +history_tokenize (const char *string) +{ + return (history_tokenize_internal (string, -1, (int *)NULL)); +} + +/* Free members of WORDS from START to an empty string */ +static void +freewords (char **words, int start) +{ + register int i; + + for (i = start; words[i]; i++) + xfree (words[i]); +} + +/* Find and return the word which contains the character at index IND + in the history line LINE. Used to save the word matched by the + last history !?string? search. */ +static char * +history_find_word (char *line, int ind) +{ + char **words, *s; + int i, wind; + + words = history_tokenize_internal (line, ind, &wind); + if (wind == -1 || words == 0) + { + if (words) + freewords (words, 0); + FREE (words); + return ((char *)NULL); + } + s = words[wind]; + for (i = 0; i < wind; i++) + xfree (words[i]); + freewords (words, wind + 1); + xfree (words); + return s; +} diff --git a/readline/readline/histfile.c b/readline/readline/histfile.c new file mode 100644 index 0000000000..dc64bde1c5 --- /dev/null +++ b/readline/readline/histfile.c @@ -0,0 +1,791 @@ +/* histfile.c - functions to manipulate the history file. */ + +/* Copyright (C) 1989-2018 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +/* The goal is to make the implementation transparent, so that you + don't have to know what data types are used, just what functions + you can call. I think I have done that. */ + +#define READLINE_LIBRARY + +#if defined (__TANDEM) +# include +#endif + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_LIMITS_H) +# include +#endif + +#include +#if ! defined (_MINIX) && defined (HAVE_SYS_FILE_H) +# include +#endif +#include "posixstat.h" +#include + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif + +#include + +#if defined (__EMX__) +# undef HAVE_MMAP +#endif + +#ifdef HISTORY_USE_MMAP +# include + +# ifdef MAP_FILE +# define MAP_RFLAGS (MAP_FILE|MAP_PRIVATE) +# define MAP_WFLAGS (MAP_FILE|MAP_SHARED) +# else +# define MAP_RFLAGS MAP_PRIVATE +# define MAP_WFLAGS MAP_SHARED +# endif + +# ifndef MAP_FAILED +# define MAP_FAILED ((void *)-1) +# endif + +#endif /* HISTORY_USE_MMAP */ + +/* If we're compiling for __EMX__ (OS/2) or __CYGWIN__ (cygwin32 environment + on win 95/98/nt), we want to open files with O_BINARY mode so that there + is no \n -> \r\n conversion performed. On other systems, we don't want to + mess around with O_BINARY at all, so we ensure that it's defined to 0. */ +#if defined (__EMX__) || defined (__CYGWIN__) +# ifndef O_BINARY +# define O_BINARY 0 +# endif +#else /* !__EMX__ && !__CYGWIN__ */ +# undef O_BINARY +# define O_BINARY 0 +#endif /* !__EMX__ && !__CYGWIN__ */ + +#include +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +#include "history.h" +#include "histlib.h" + +#include "rlshell.h" +#include "xmalloc.h" + +#if !defined (PATH_MAX) +# define PATH_MAX 1024 /* default */ +#endif + +extern void _hs_append_history_line PARAMS((int, const char *)); + +/* history file version; currently unused */ +int history_file_version = 1; + +/* If non-zero, we write timestamps to the history file in history_do_write() */ +int history_write_timestamps = 0; + +/* If non-zero, we assume that a history file that starts with a timestamp + uses timestamp-delimited entries and can include multi-line history + entries. Used by read_history_range */ +int history_multiline_entries = 0; + +/* Immediately after a call to read_history() or read_history_range(), this + will return the number of lines just read from the history file in that + call. */ +int history_lines_read_from_file = 0; + +/* Immediately after a call to write_history() or history_do_write(), this + will return the number of lines just written to the history file in that + call. This also works with history_truncate_file. */ +int history_lines_written_to_file = 0; + +/* Does S look like the beginning of a history timestamp entry? Placeholder + for more extensive tests. */ +#define HIST_TIMESTAMP_START(s) (*(s) == history_comment_char && isdigit ((unsigned char)(s)[1]) ) + +static char *history_backupfile PARAMS((const char *)); +static char *history_tempfile PARAMS((const char *)); +static int histfile_backup PARAMS((const char *, const char *)); +static int histfile_restore PARAMS((const char *, const char *)); + +/* Return the string that should be used in the place of this + filename. This only matters when you don't specify the + filename to read_history (), or write_history (). */ +static char * +history_filename (const char *filename) +{ + char *return_val; + const char *home; + int home_len; + + return_val = filename ? savestring (filename) : (char *)NULL; + + if (return_val) + return (return_val); + + home = sh_get_env_value ("HOME"); +#if defined (_WIN32) + if (home == 0) + home = sh_get_env_value ("APPDATA"); +#endif + + if (home == 0) + return (NULL); + else + home_len = strlen (home); + + return_val = (char *)xmalloc (2 + home_len + 8); /* strlen(".history") == 8 */ + strcpy (return_val, home); + return_val[home_len] = '/'; +#if defined (__MSDOS__) + strcpy (return_val + home_len + 1, "_history"); +#else + strcpy (return_val + home_len + 1, ".history"); +#endif + + return (return_val); +} + +static char * +history_backupfile (const char *filename) +{ + const char *fn; + char *ret, linkbuf[PATH_MAX+1]; + size_t len; + ssize_t n; + struct stat fs; + + fn = filename; +#if defined (HAVE_READLINK) + /* Follow symlink to avoid backing up symlink itself; call will fail if + not a symlink */ + if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) + { + linkbuf[n] = '\0'; + fn = linkbuf; + } +#endif + + len = strlen (fn); + ret = xmalloc (len + 2); + strcpy (ret, fn); + ret[len] = '-'; + ret[len+1] = '\0'; + return ret; +} + +static char * +history_tempfile (const char *filename) +{ + const char *fn; + char *ret, linkbuf[PATH_MAX+1]; + size_t len; + ssize_t n; + struct stat fs; + int pid; + + fn = filename; +#if defined (HAVE_READLINK) + /* Follow symlink so tempfile created in the same directory as any symlinked + history file; call will fail if not a symlink */ + if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) + { + linkbuf[n] = '\0'; + fn = linkbuf; + } +#endif + + len = strlen (fn); + ret = xmalloc (len + 11); + strcpy (ret, fn); + + pid = (int)getpid (); + + /* filename-PID.tmp */ + ret[len] = '-'; + ret[len+1] = (pid / 10000 % 10) + '0'; + ret[len+2] = (pid / 1000 % 10) + '0'; + ret[len+3] = (pid / 100 % 10) + '0'; + ret[len+4] = (pid / 10 % 10) + '0'; + ret[len+5] = (pid % 10) + '0'; + strcpy (ret + len + 6, ".tmp"); + + return ret; +} + +/* Add the contents of FILENAME to the history list, a line at a time. + If FILENAME is NULL, then read from ~/.history. Returns 0 if + successful, or errno if not. */ +int +read_history (const char *filename) +{ + return (read_history_range (filename, 0, -1)); +} + +/* Read a range of lines from FILENAME, adding them to the history list. + Start reading at the FROM'th line and end at the TO'th. If FROM + is zero, start at the beginning. If TO is less than FROM, read + until the end of the file. If FILENAME is NULL, then read from + ~/.history. Returns 0 if successful, or errno if not. */ +int +read_history_range (const char *filename, int from, int to) +{ + register char *line_start, *line_end, *p; + char *input, *buffer, *bufend, *last_ts; + int file, current_line, chars_read, has_timestamps, reset_comment_char; + struct stat finfo; + size_t file_size; +#if defined (EFBIG) + int overflow_errno = EFBIG; +#elif defined (EOVERFLOW) + int overflow_errno = EOVERFLOW; +#else + int overflow_errno = EIO; +#endif + + history_lines_read_from_file = 0; + + buffer = last_ts = (char *)NULL; + input = history_filename (filename); + file = input ? open (input, O_RDONLY|O_BINARY, 0666) : -1; + + if ((file < 0) || (fstat (file, &finfo) == -1)) + goto error_and_exit; + + if (S_ISREG (finfo.st_mode) == 0) + { +#ifdef EFTYPE + errno = EFTYPE; +#else + errno = EINVAL; +#endif + goto error_and_exit; + } + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { + errno = overflow_errno; + goto error_and_exit; + } + + if (file_size == 0) + { + free (input); + return 0; /* don't waste time if we don't have to */ + } + +#ifdef HISTORY_USE_MMAP + /* We map read/write and private so we can change newlines to NULs without + affecting the underlying object. */ + buffer = (char *)mmap (0, file_size, PROT_READ|PROT_WRITE, MAP_RFLAGS, file, 0); + if ((void *)buffer == MAP_FAILED) + { + errno = overflow_errno; + goto error_and_exit; + } + chars_read = file_size; +#else + buffer = (char *)malloc (file_size + 1); + if (buffer == 0) + { + errno = overflow_errno; + goto error_and_exit; + } + + chars_read = read (file, buffer, file_size); +#endif + if (chars_read < 0) + { + error_and_exit: + if (errno != 0) + chars_read = errno; + else + chars_read = EIO; + if (file >= 0) + close (file); + + FREE (input); +#ifndef HISTORY_USE_MMAP + FREE (buffer); +#endif + + return (chars_read); + } + + close (file); + + /* Set TO to larger than end of file if negative. */ + if (to < 0) + to = chars_read; + + /* Start at beginning of file, work to end. */ + bufend = buffer + chars_read; + *bufend = '\0'; /* null-terminate buffer for timestamp checks */ + current_line = 0; + + /* Heuristic: the history comment character rarely changes, so assume we + have timestamps if the buffer starts with `#[:digit:]' and temporarily + set history_comment_char so timestamp parsing works right */ + reset_comment_char = 0; + if (history_comment_char == '\0' && buffer[0] == '#' && isdigit ((unsigned char)buffer[1])) + { + history_comment_char = '#'; + reset_comment_char = 1; + } + + has_timestamps = HIST_TIMESTAMP_START (buffer); + history_multiline_entries += has_timestamps && history_write_timestamps; + + /* Skip lines until we are at FROM. */ + for (line_start = line_end = buffer; line_end < bufend && current_line < from; line_end++) + if (*line_end == '\n') + { + p = line_end + 1; + /* If we see something we think is a timestamp, continue with this + line. We should check more extensively here... */ + if (HIST_TIMESTAMP_START(p) == 0) + current_line++; + line_start = p; + } + + /* If there are lines left to gobble, then gobble them now. */ + for (line_end = line_start; line_end < bufend; line_end++) + if (*line_end == '\n') + { + /* Change to allow Windows-like \r\n end of line delimiter. */ + if (line_end > line_start && line_end[-1] == '\r') + line_end[-1] = '\0'; + else + *line_end = '\0'; + + if (*line_start) + { + if (HIST_TIMESTAMP_START(line_start) == 0) + { + if (last_ts == NULL && history_length > 0 && history_multiline_entries) + _hs_append_history_line (history_length - 1, line_start); + else + add_history (line_start); + if (last_ts) + { + add_history_time (last_ts); + last_ts = NULL; + } + } + else + { + last_ts = line_start; + current_line--; + } + } + + current_line++; + + if (current_line >= to) + break; + + line_start = line_end + 1; + } + + history_lines_read_from_file = current_line; + if (reset_comment_char) + history_comment_char = '\0'; + + FREE (input); +#ifndef HISTORY_USE_MMAP + FREE (buffer); +#else + munmap (buffer, file_size); +#endif + + return (0); +} + +/* Save FILENAME to BACK, handling case where FILENAME is a symlink + (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */ +static int +histfile_backup (const char *filename, const char *back) +{ +#if defined (HAVE_READLINK) + char linkbuf[PATH_MAX+1]; + ssize_t n; + + /* Follow to target of symlink to avoid renaming symlink itself */ + if ((n = readlink (filename, linkbuf, sizeof (linkbuf) - 1)) > 0) + { + linkbuf[n] = '\0'; + return (rename (linkbuf, back)); + } +#endif + return (rename (filename, back)); +} + +/* Restore ORIG from BACKUP handling case where ORIG is a symlink + (e.g., ~/.bash_history -> .histfiles/.bash_history.$HOSTNAME) */ +static int +histfile_restore (const char *backup, const char *orig) +{ +#if defined (HAVE_READLINK) + char linkbuf[PATH_MAX+1]; + ssize_t n; + + /* Follow to target of symlink to avoid renaming symlink itself */ + if ((n = readlink (orig, linkbuf, sizeof (linkbuf) - 1)) > 0) + { + linkbuf[n] = '\0'; + return (rename (backup, linkbuf)); + } +#endif + return (rename (backup, orig)); +} + +/* Truncate the history file FNAME, leaving only LINES trailing lines. + If FNAME is NULL, then use ~/.history. Writes a new file and renames + it to the original name. Returns 0 on success, errno on failure. */ +int +history_truncate_file (const char *fname, int lines) +{ + char *buffer, *filename, *tempname, *bp, *bp1; /* bp1 == bp+1 */ + int file, chars_read, rv, orig_lines, exists, r; + struct stat finfo; + size_t file_size; + + history_lines_written_to_file = 0; + + buffer = (char *)NULL; + filename = history_filename (fname); + tempname = 0; + file = filename ? open (filename, O_RDONLY|O_BINARY, 0666) : -1; + rv = exists = 0; + + /* Don't try to truncate non-regular files. */ + if (file == -1 || fstat (file, &finfo) == -1) + { + rv = errno; + if (file != -1) + close (file); + goto truncate_exit; + } + exists = 1; + + if (S_ISREG (finfo.st_mode) == 0) + { + close (file); +#ifdef EFTYPE + rv = EFTYPE; +#else + rv = EINVAL; +#endif + goto truncate_exit; + } + + file_size = (size_t)finfo.st_size; + + /* check for overflow on very large files */ + if (file_size != finfo.st_size || file_size + 1 < file_size) + { + close (file); +#if defined (EFBIG) + rv = errno = EFBIG; +#elif defined (EOVERFLOW) + rv = errno = EOVERFLOW; +#else + rv = errno = EINVAL; +#endif + goto truncate_exit; + } + + buffer = (char *)malloc (file_size + 1); + if (buffer == 0) + { + rv = errno; + close (file); + goto truncate_exit; + } + + chars_read = read (file, buffer, file_size); + close (file); + + if (chars_read <= 0) + { + rv = (chars_read < 0) ? errno : 0; + goto truncate_exit; + } + + orig_lines = lines; + /* Count backwards from the end of buffer until we have passed + LINES lines. bp1 is set funny initially. But since bp[1] can't + be a comment character (since it's off the end) and *bp can't be + both a newline and the history comment character, it should be OK. */ + for (bp1 = bp = buffer + chars_read - 1; lines && bp > buffer; bp--) + { + if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0) + lines--; + bp1 = bp; + } + + /* If this is the first line, then the file contains exactly the + number of lines we want to truncate to, so we don't need to do + anything. It's the first line if we don't find a newline between + the current value of i and 0. Otherwise, write from the start of + this line until the end of the buffer. */ + for ( ; bp > buffer; bp--) + { + if (*bp == '\n' && HIST_TIMESTAMP_START(bp1) == 0) + { + bp++; + break; + } + bp1 = bp; + } + + /* Write only if there are more lines in the file than we want to + truncate to. */ + if (bp <= buffer) + { + rv = 0; + /* No-op if LINES == 0 at this point */ + history_lines_written_to_file = orig_lines - lines; + goto truncate_exit; + } + + tempname = history_tempfile (filename); + + if ((file = open (tempname, O_WRONLY|O_CREAT|O_TRUNC|O_BINARY, 0600)) != -1) + { + if (write (file, bp, chars_read - (bp - buffer)) < 0) + rv = errno; + + if (close (file) < 0 && rv == 0) + rv = errno; + } + else + rv = errno; + + truncate_exit: + FREE (buffer); + + history_lines_written_to_file = orig_lines - lines; + + if (rv == 0 && filename && tempname) + rv = histfile_restore (tempname, filename); + + if (rv != 0) + { + if (tempname) + unlink (tempname); + history_lines_written_to_file = 0; + } + +#if defined (HAVE_CHOWN) + /* Make sure the new filename is owned by the same user as the old. If one + user is running this, it's a no-op. If the shell is running after sudo + with a shared history file, we don't want to leave the history file + owned by root. */ + if (rv == 0 && exists) + r = chown (filename, finfo.st_uid, finfo.st_gid); +#endif + + xfree (filename); + FREE (tempname); + + return rv; +} + +/* Workhorse function for writing history. Writes the last NELEMENT entries + from the history list to FILENAME. OVERWRITE is non-zero if you + wish to replace FILENAME with the entries. */ +static int +history_do_write (const char *filename, int nelements, int overwrite) +{ + register int i; + char *output, *tempname, *histname; + int file, mode, rv, exists; + struct stat finfo; +#ifdef HISTORY_USE_MMAP + size_t cursize; + + history_lines_written_to_file = 0; + + mode = overwrite ? O_RDWR|O_CREAT|O_TRUNC|O_BINARY : O_RDWR|O_APPEND|O_BINARY; +#else + mode = overwrite ? O_WRONLY|O_CREAT|O_TRUNC|O_BINARY : O_WRONLY|O_APPEND|O_BINARY; +#endif + histname = history_filename (filename); + exists = histname ? (stat (histname, &finfo) == 0) : 0; + + tempname = (overwrite && exists && S_ISREG (finfo.st_mode)) ? history_tempfile (histname) : 0; + output = tempname ? tempname : histname; + + file = output ? open (output, mode, 0600) : -1; + rv = 0; + + if (file == -1) + { + rv = errno; + FREE (histname); + FREE (tempname); + return (rv); + } + +#ifdef HISTORY_USE_MMAP + cursize = overwrite ? 0 : lseek (file, 0, SEEK_END); +#endif + + if (nelements > history_length) + nelements = history_length; + + /* Build a buffer of all the lines to write, and write them in one syscall. + Suggested by Peter Ho (peter@robosts.oxford.ac.uk). */ + { + HIST_ENTRY **the_history; /* local */ + register int j; + int buffer_size; + char *buffer; + + the_history = history_list (); + /* Calculate the total number of bytes to write. */ + for (buffer_size = 0, i = history_length - nelements; i < history_length; i++) +#if 0 + buffer_size += 2 + HISTENT_BYTES (the_history[i]); +#else + { + if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0]) + buffer_size += strlen (the_history[i]->timestamp) + 1; + buffer_size += strlen (the_history[i]->line) + 1; + } +#endif + + /* Allocate the buffer, and fill it. */ +#ifdef HISTORY_USE_MMAP + if (ftruncate (file, buffer_size+cursize) == -1) + goto mmap_error; + buffer = (char *)mmap (0, buffer_size, PROT_READ|PROT_WRITE, MAP_WFLAGS, file, cursize); + if ((void *)buffer == MAP_FAILED) + { +mmap_error: + rv = errno; + close (file); + if (tempname) + unlink (tempname); + FREE (histname); + FREE (tempname); + return rv; + } +#else + buffer = (char *)malloc (buffer_size); + if (buffer == 0) + { + rv = errno; + close (file); + if (tempname) + unlink (tempname); + FREE (histname); + FREE (tempname); + return rv; + } +#endif + + for (j = 0, i = history_length - nelements; i < history_length; i++) + { + if (history_write_timestamps && the_history[i]->timestamp && the_history[i]->timestamp[0]) + { + strcpy (buffer + j, the_history[i]->timestamp); + j += strlen (the_history[i]->timestamp); + buffer[j++] = '\n'; + } + strcpy (buffer + j, the_history[i]->line); + j += strlen (the_history[i]->line); + buffer[j++] = '\n'; + } + +#ifdef HISTORY_USE_MMAP + if (msync (buffer, buffer_size, MS_ASYNC) != 0 || munmap (buffer, buffer_size) != 0) + rv = errno; +#else + if (write (file, buffer, buffer_size) < 0) + rv = errno; + xfree (buffer); +#endif + } + + history_lines_written_to_file = nelements; + + if (close (file) < 0 && rv == 0) + rv = errno; + + if (rv == 0 && histname && tempname) + rv = histfile_restore (tempname, histname); + + if (rv != 0) + { + if (tempname) + unlink (tempname); + history_lines_written_to_file = 0; + } + +#if defined (HAVE_CHOWN) + /* Make sure the new filename is owned by the same user as the old. If one + user is running this, it's a no-op. If the shell is running after sudo + with a shared history file, we don't want to leave the history file + owned by root. */ + if (rv == 0 && exists) + mode = chown (histname, finfo.st_uid, finfo.st_gid); +#endif + + FREE (histname); + FREE (tempname); + + return (rv); +} + +/* Append NELEMENT entries to FILENAME. The entries appended are from + the end of the list minus NELEMENTs up to the end of the list. */ +int +append_history (int nelements, const char *filename) +{ + return (history_do_write (filename, nelements, HISTORY_APPEND)); +} + +/* Overwrite FILENAME with the current history. If FILENAME is NULL, + then write the history list to ~/.history. Values returned + are as in read_history ().*/ +int +write_history (const char *filename) +{ + return (history_do_write (filename, history_length, HISTORY_OVERWRITE)); +} diff --git a/readline/readline/histlib.h b/readline/readline/histlib.h new file mode 100644 index 0000000000..9627b24500 --- /dev/null +++ b/readline/readline/histlib.h @@ -0,0 +1,85 @@ +/* histlib.h -- internal definitions for the history library. */ + +/* Copyright (C) 1989-2009 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +#if !defined (_HISTLIB_H_) +#define _HISTLIB_H_ + +#if defined (HAVE_STRING_H) +# include +#else +# include +#endif /* !HAVE_STRING_H */ + +#if !defined (STREQ) +#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) +#define STREQN(a, b, n) (((n) == 0) ? (1) \ + : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) +#endif + +#ifndef savestring +#define savestring(x) strcpy (xmalloc (1 + strlen (x)), (x)) +#endif + +#ifndef whitespace +#define whitespace(c) (((c) == ' ') || ((c) == '\t')) +#endif + +#ifndef _rl_digit_p +#define _rl_digit_p(c) ((c) >= '0' && (c) <= '9') +#endif + +#ifndef _rl_digit_value +#define _rl_digit_value(c) ((c) - '0') +#endif + +#ifndef member +# if !defined (strchr) && !defined (__STDC__) +extern char *strchr (); +# endif /* !strchr && !__STDC__ */ +#define member(c, s) ((c) ? ((char *)strchr ((s), (c)) != (char *)NULL) : 0) +#endif + +#ifndef FREE +# define FREE(x) if (x) free (x) +#endif + +/* Possible history errors passed to hist_error. */ +#define EVENT_NOT_FOUND 0 +#define BAD_WORD_SPEC 1 +#define SUBST_FAILED 2 +#define BAD_MODIFIER 3 +#define NO_PREV_SUBST 4 + +/* Possible definitions for history starting point specification. */ +#define NON_ANCHORED_SEARCH 0 +#define ANCHORED_SEARCH 0x01 +#define PATTERN_SEARCH 0x02 + +/* Possible definitions for what style of writing the history file we want. */ +#define HISTORY_APPEND 0 +#define HISTORY_OVERWRITE 1 + +/* internal extern function declarations used by other parts of the library */ + +/* histsearch.c */ +extern int _hs_history_patsearch PARAMS((const char *, int, int)); + +#endif /* !_HISTLIB_H_ */ diff --git a/readline/readline/history.c b/readline/readline/history.c new file mode 100644 index 0000000000..67158b14bc --- /dev/null +++ b/readline/readline/history.c @@ -0,0 +1,607 @@ +/* history.c -- standalone history library */ + +/* Copyright (C) 1989-2017 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +/* The goal is to make the implementation transparent, so that you + don't have to know what data types are used, just what functions + you can call. I think I have done that. */ +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include +# endif +# include +#endif + +#include + +#include "history.h" +#include "histlib.h" + +#include "xmalloc.h" + +#if !defined (errno) +extern int errno; +#endif + +/* How big to make the_history when we first allocate it. */ +#define DEFAULT_HISTORY_INITIAL_SIZE 502 + +#define MAX_HISTORY_INITIAL_SIZE 8192 + +/* The number of slots to increase the_history by. */ +#define DEFAULT_HISTORY_GROW_SIZE 50 + +static char *hist_inittime PARAMS((void)); + +/* **************************************************************** */ +/* */ +/* History Functions */ +/* */ +/* **************************************************************** */ + +/* An array of HIST_ENTRY. This is where we store the history. */ +static HIST_ENTRY **the_history = (HIST_ENTRY **)NULL; + +/* Non-zero means that we have enforced a limit on the amount of + history that we save. */ +static int history_stifled; + +/* The current number of slots allocated to the input_history. */ +static int history_size; + +/* If HISTORY_STIFLED is non-zero, then this is the maximum number of + entries to remember. */ +int history_max_entries; +int max_input_history; /* backwards compatibility */ + +/* The current location of the interactive history pointer. Just makes + life easier for outside callers. */ +int history_offset; + +/* The number of strings currently stored in the history list. */ +int history_length; + +/* The logical `base' of the history array. It defaults to 1. */ +int history_base = 1; + +/* Return the current HISTORY_STATE of the history. */ +HISTORY_STATE * +history_get_history_state (void) +{ + HISTORY_STATE *state; + + state = (HISTORY_STATE *)xmalloc (sizeof (HISTORY_STATE)); + state->entries = the_history; + state->offset = history_offset; + state->length = history_length; + state->size = history_size; + state->flags = 0; + if (history_stifled) + state->flags |= HS_STIFLED; + + return (state); +} + +/* Set the state of the current history array to STATE. */ +void +history_set_history_state (HISTORY_STATE *state) +{ + the_history = state->entries; + history_offset = state->offset; + history_length = state->length; + history_size = state->size; + if (state->flags & HS_STIFLED) + history_stifled = 1; +} + +/* Begin a session in which the history functions might be used. This + initializes interactive variables. */ +void +using_history (void) +{ + history_offset = history_length; +} + +/* Return the number of bytes that the primary history entries are using. + This just adds up the lengths of the_history->lines and the associated + timestamps. */ +int +history_total_bytes (void) +{ + register int i, result; + + for (i = result = 0; the_history && the_history[i]; i++) + result += HISTENT_BYTES (the_history[i]); + + return (result); +} + +/* Returns the magic number which says what history element we are + looking at now. In this implementation, it returns history_offset. */ +int +where_history (void) +{ + return (history_offset); +} + +/* Make the current history item be the one at POS, an absolute index. + Returns zero if POS is out of range, else non-zero. */ +int +history_set_pos (int pos) +{ + if (pos > history_length || pos < 0 || !the_history) + return (0); + history_offset = pos; + return (1); +} + +/* Return the current history array. The caller has to be careful, since this + is the actual array of data, and could be bashed or made corrupt easily. + The array is terminated with a NULL pointer. */ +HIST_ENTRY ** +history_list (void) +{ + return (the_history); +} + +/* Return the history entry at the current position, as determined by + history_offset. If there is no entry there, return a NULL pointer. */ +HIST_ENTRY * +current_history (void) +{ + return ((history_offset == history_length) || the_history == 0) + ? (HIST_ENTRY *)NULL + : the_history[history_offset]; +} + +/* Back up history_offset to the previous history entry, and return + a pointer to that entry. If there is no previous entry then return + a NULL pointer. */ +HIST_ENTRY * +previous_history (void) +{ + return history_offset ? the_history[--history_offset] : (HIST_ENTRY *)NULL; +} + +/* Move history_offset forward to the next history entry, and return + a pointer to that entry. If there is no next entry then return a + NULL pointer. */ +HIST_ENTRY * +next_history (void) +{ + return (history_offset == history_length) ? (HIST_ENTRY *)NULL : the_history[++history_offset]; +} + +/* Return the history entry which is logically at OFFSET in the history array. + OFFSET is relative to history_base. */ +HIST_ENTRY * +history_get (int offset) +{ + int local_index; + + local_index = offset - history_base; + return (local_index >= history_length || local_index < 0 || the_history == 0) + ? (HIST_ENTRY *)NULL + : the_history[local_index]; +} + +HIST_ENTRY * +alloc_history_entry (char *string, char *ts) +{ + HIST_ENTRY *temp; + + temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + + temp->line = string ? savestring (string) : string; + temp->data = (char *)NULL; + temp->timestamp = ts; + + return temp; +} + +time_t +history_get_time (HIST_ENTRY *hist) +{ + char *ts; + time_t t; + + if (hist == 0 || hist->timestamp == 0) + return 0; + ts = hist->timestamp; + if (ts[0] != history_comment_char) + return 0; + errno = 0; + t = (time_t) strtol (ts + 1, (char **)NULL, 10); /* XXX - should use strtol() here */ + if (errno == ERANGE) + return (time_t)0; + return t; +} + +static char * +hist_inittime (void) +{ + time_t t; + char ts[64], *ret; + + t = (time_t) time ((time_t *)0); +#if defined (HAVE_VSNPRINTF) /* assume snprintf if vsnprintf exists */ + snprintf (ts, sizeof (ts) - 1, "X%lu", (unsigned long) t); +#else + sprintf (ts, "X%lu", (unsigned long) t); +#endif + ret = savestring (ts); + ret[0] = history_comment_char; + + return ret; +} + +/* Place STRING at the end of the history list. The data field + is set to NULL. */ +void +add_history (const char *string) +{ + HIST_ENTRY *temp; + int new_length; + + if (history_stifled && (history_length == history_max_entries)) + { + register int i; + + /* If the history is stifled, and history_length is zero, + and it equals history_max_entries, we don't save items. */ + if (history_length == 0) + return; + + /* If there is something in the slot, then remove it. */ + if (the_history[0]) + (void) free_history_entry (the_history[0]); + + /* Copy the rest of the entries, moving down one slot. Copy includes + trailing NULL. */ + memmove (the_history, the_history + 1, history_length * sizeof (HIST_ENTRY *)); + + new_length = history_length; + history_base++; + } + else + { + if (history_size == 0) + { + if (history_stifled && history_max_entries > 0) + history_size = (history_max_entries > MAX_HISTORY_INITIAL_SIZE) + ? MAX_HISTORY_INITIAL_SIZE + : history_max_entries + 2; + else + history_size = DEFAULT_HISTORY_INITIAL_SIZE; + the_history = (HIST_ENTRY **)xmalloc (history_size * sizeof (HIST_ENTRY *)); + new_length = 1; + } + else + { + if (history_length == (history_size - 1)) + { + history_size += DEFAULT_HISTORY_GROW_SIZE; + the_history = (HIST_ENTRY **) + xrealloc (the_history, history_size * sizeof (HIST_ENTRY *)); + } + new_length = history_length + 1; + } + } + + temp = alloc_history_entry ((char *)string, hist_inittime ()); + + the_history[new_length] = (HIST_ENTRY *)NULL; + the_history[new_length - 1] = temp; + history_length = new_length; +} + +/* Change the time stamp of the most recent history entry to STRING. */ +void +add_history_time (const char *string) +{ + HIST_ENTRY *hs; + + if (string == 0 || history_length < 1) + return; + hs = the_history[history_length - 1]; + FREE (hs->timestamp); + hs->timestamp = savestring (string); +} + +/* Free HIST and return the data so the calling application can free it + if necessary and desired. */ +histdata_t +free_history_entry (HIST_ENTRY *hist) +{ + histdata_t x; + + if (hist == 0) + return ((histdata_t) 0); + FREE (hist->line); + FREE (hist->timestamp); + x = hist->data; + xfree (hist); + return (x); +} + +HIST_ENTRY * +copy_history_entry (HIST_ENTRY *hist) +{ + HIST_ENTRY *ret; + char *ts; + + if (hist == 0) + return hist; + + ret = alloc_history_entry (hist->line, (char *)NULL); + + ts = hist->timestamp ? savestring (hist->timestamp) : hist->timestamp; + ret->timestamp = ts; + + ret->data = hist->data; + + return ret; +} + +/* Make the history entry at WHICH have LINE and DATA. This returns + the old entry so you can dispose of the data. In the case of an + invalid WHICH, a NULL pointer is returned. */ +HIST_ENTRY * +replace_history_entry (int which, const char *line, histdata_t data) +{ + HIST_ENTRY *temp, *old_value; + + if (which < 0 || which >= history_length) + return ((HIST_ENTRY *)NULL); + + temp = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + old_value = the_history[which]; + + temp->line = savestring (line); + temp->data = data; + temp->timestamp = savestring (old_value->timestamp); + the_history[which] = temp; + + return (old_value); +} + +/* Append LINE to the history line at offset WHICH, adding a newline to the + end of the current line first. This can be used to construct multi-line + history entries while reading lines from the history file. */ +void +_hs_append_history_line (int which, const char *line) +{ + HIST_ENTRY *hent; + size_t newlen, curlen, minlen; + char *newline; + + hent = the_history[which]; + curlen = strlen (hent->line); + minlen = curlen + strlen (line) + 2; /* min space needed */ + if (curlen > 256) /* XXX - for now */ + { + newlen = 512; /* now realloc in powers of 2 */ + /* we recalcluate every time; the operations are cheap */ + while (newlen < minlen) + newlen <<= 1; + } + else + newlen = minlen; + /* Assume that realloc returns the same pointer and doesn't try a new + alloc/copy if the new size is the same as the one last passed. */ + newline = realloc (hent->line, newlen); + if (newline) + { + hent->line = newline; + hent->line[curlen++] = '\n'; + strcpy (hent->line + curlen, line); + } +} + +/* Replace the DATA in the specified history entries, replacing OLD with + NEW. WHICH says which one(s) to replace: WHICH == -1 means to replace + all of the history entries where entry->data == OLD; WHICH == -2 means + to replace the `newest' history entry where entry->data == OLD; and + WHICH >= 0 means to replace that particular history entry's data, as + long as it matches OLD. */ +void +_hs_replace_history_data (int which, histdata_t *old, histdata_t *new) +{ + HIST_ENTRY *entry; + register int i, last; + + if (which < -2 || which >= history_length || history_length == 0 || the_history == 0) + return; + + if (which >= 0) + { + entry = the_history[which]; + if (entry && entry->data == old) + entry->data = new; + return; + } + + last = -1; + for (i = 0; i < history_length; i++) + { + entry = the_history[i]; + if (entry == 0) + continue; + if (entry->data == old) + { + last = i; + if (which == -1) + entry->data = new; + } + } + if (which == -2 && last >= 0) + { + entry = the_history[last]; + entry->data = new; /* XXX - we don't check entry->old */ + } +} + +/* Remove history element WHICH from the history. The removed + element is returned to you so you can free the line, data, + and containing structure. */ +HIST_ENTRY * +remove_history (int which) +{ + HIST_ENTRY *return_value; + register int i; +#if 1 + int nentries; + HIST_ENTRY **start, **end; +#endif + + if (which < 0 || which >= history_length || history_length == 0 || the_history == 0) + return ((HIST_ENTRY *)NULL); + + return_value = the_history[which]; + +#if 1 + /* Copy the rest of the entries, moving down one slot. Copy includes + trailing NULL. */ + nentries = history_length - which; + start = the_history + which; + end = start + 1; + memmove (start, end, nentries * sizeof (HIST_ENTRY *)); +#else + for (i = which; i < history_length; i++) + the_history[i] = the_history[i + 1]; +#endif + + history_length--; + + return (return_value); +} + +HIST_ENTRY ** +remove_history_range (int first, int last) +{ + HIST_ENTRY **return_value; + register int i; + int nentries; + HIST_ENTRY **start, **end; + + if (the_history == 0 || history_length == 0) + return ((HIST_ENTRY **)NULL); + if (first < 0 || first >= history_length || last < 0 || last >= history_length) + return ((HIST_ENTRY **)NULL); + if (first > last) + return (HIST_ENTRY **)NULL; + + nentries = last - first + 1; + return_value = (HIST_ENTRY **)malloc ((nentries + 1) * sizeof (HIST_ENTRY *)); + if (return_value == 0) + return return_value; + + /* Return all the deleted entries in a list */ + for (i = first ; i <= last; i++) + return_value[i - first] = the_history[i]; + return_value[i - first] = (HIST_ENTRY *)NULL; + + /* Copy the rest of the entries, moving down NENTRIES slots. Copy includes + trailing NULL. */ + start = the_history + first; + end = the_history + last + 1; + memmove (start, end, (history_length - last) * sizeof (HIST_ENTRY *)); + + history_length -= nentries; + + return (return_value); +} + +/* Stifle the history list, remembering only MAX number of lines. */ +void +stifle_history (int max) +{ + register int i, j; + + if (max < 0) + max = 0; + + if (history_length > max) + { + /* This loses because we cannot free the data. */ + for (i = 0, j = history_length - max; i < j; i++) + free_history_entry (the_history[i]); + + history_base = i; + for (j = 0, i = history_length - max; j < max; i++, j++) + the_history[j] = the_history[i]; + the_history[j] = (HIST_ENTRY *)NULL; + history_length = j; + } + + history_stifled = 1; + max_input_history = history_max_entries = max; +} + +/* Stop stifling the history. This returns the previous maximum + number of history entries. The value is positive if the history + was stifled, negative if it wasn't. */ +int +unstifle_history (void) +{ + if (history_stifled) + { + history_stifled = 0; + return (history_max_entries); + } + else + return (-history_max_entries); +} + +int +history_is_stifled (void) +{ + return (history_stifled); +} + +void +clear_history (void) +{ + register int i; + + /* This loses because we cannot free the data. */ + for (i = 0; i < history_length; i++) + { + free_history_entry (the_history[i]); + the_history[i] = (HIST_ENTRY *)NULL; + } + + history_offset = history_length = 0; + history_base = 1; /* reset history base to default */ +} diff --git a/readline/readline/history.h b/readline/readline/history.h new file mode 100644 index 0000000000..cc3de29a64 --- /dev/null +++ b/readline/readline/history.h @@ -0,0 +1,286 @@ +/* history.h -- the names of functions that you can call in history. */ + +/* Copyright (C) 1989-2015 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +#ifndef _HISTORY_H_ +#define _HISTORY_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#include /* XXX - for history timestamp code */ + +#if defined READLINE_LIBRARY +# include "rlstdc.h" +# include "rltypedefs.h" +#else +# include +# include +#endif + +#ifdef __STDC__ +typedef void *histdata_t; +#else +typedef char *histdata_t; +#endif + +/* The structure used to store a history entry. */ +typedef struct _hist_entry { + char *line; + char *timestamp; /* char * rather than time_t for read/write */ + histdata_t data; +} HIST_ENTRY; + +/* Size of the history-library-managed space in history entry HS. */ +#define HISTENT_BYTES(hs) (strlen ((hs)->line) + strlen ((hs)->timestamp)) + +/* A structure used to pass the current state of the history stuff around. */ +typedef struct _hist_state { + HIST_ENTRY **entries; /* Pointer to the entries themselves. */ + int offset; /* The location pointer within this array. */ + int length; /* Number of elements within this array. */ + int size; /* Number of slots allocated to this array. */ + int flags; +} HISTORY_STATE; + +/* Flag values for the `flags' member of HISTORY_STATE. */ +#define HS_STIFLED 0x01 + +/* Initialization and state management. */ + +/* Begin a session in which the history functions might be used. This + just initializes the interactive variables. */ +extern void using_history PARAMS((void)); + +/* Return the current HISTORY_STATE of the history. */ +extern HISTORY_STATE *history_get_history_state PARAMS((void)); + +/* Set the state of the current history array to STATE. */ +extern void history_set_history_state PARAMS((HISTORY_STATE *)); + +/* Manage the history list. */ + +/* Place STRING at the end of the history list. + The associated data field (if any) is set to NULL. */ +extern void add_history PARAMS((const char *)); + +/* Change the timestamp associated with the most recent history entry to + STRING. */ +extern void add_history_time PARAMS((const char *)); + +/* Remove an entry from the history list. WHICH is the magic number that + tells us which element to delete. The elements are numbered from 0. */ +extern HIST_ENTRY *remove_history PARAMS((int)); + +/* Remove a set of entries from the history list: FIRST to LAST, inclusive */ +extern HIST_ENTRY **remove_history_range PARAMS((int, int)); + +/* Allocate a history entry consisting of STRING and TIMESTAMP and return + a pointer to it. */ +extern HIST_ENTRY *alloc_history_entry PARAMS((char *, char *)); + +/* Copy the history entry H, but not the (opaque) data pointer */ +extern HIST_ENTRY *copy_history_entry PARAMS((HIST_ENTRY *)); + +/* Free the history entry H and return any application-specific data + associated with it. */ +extern histdata_t free_history_entry PARAMS((HIST_ENTRY *)); + +/* Make the history entry at WHICH have LINE and DATA. This returns + the old entry so you can dispose of the data. In the case of an + invalid WHICH, a NULL pointer is returned. */ +extern HIST_ENTRY *replace_history_entry PARAMS((int, const char *, histdata_t)); + +/* Clear the history list and start over. */ +extern void clear_history PARAMS((void)); + +/* Stifle the history list, remembering only MAX number of entries. */ +extern void stifle_history PARAMS((int)); + +/* Stop stifling the history. This returns the previous amount the + history was stifled by. The value is positive if the history was + stifled, negative if it wasn't. */ +extern int unstifle_history PARAMS((void)); + +/* Return 1 if the history is stifled, 0 if it is not. */ +extern int history_is_stifled PARAMS((void)); + +/* Information about the history list. */ + +/* Return a NULL terminated array of HIST_ENTRY which is the current input + history. Element 0 of this list is the beginning of time. If there + is no history, return NULL. */ +extern HIST_ENTRY **history_list PARAMS((void)); + +/* Returns the number which says what history element we are now + looking at. */ +extern int where_history PARAMS((void)); + +/* Return the history entry at the current position, as determined by + history_offset. If there is no entry there, return a NULL pointer. */ +extern HIST_ENTRY *current_history PARAMS((void)); + +/* Return the history entry which is logically at OFFSET in the history + array. OFFSET is relative to history_base. */ +extern HIST_ENTRY *history_get PARAMS((int)); + +/* Return the timestamp associated with the HIST_ENTRY * passed as an + argument */ +extern time_t history_get_time PARAMS((HIST_ENTRY *)); + +/* Return the number of bytes that the primary history entries are using. + This just adds up the lengths of the_history->lines. */ +extern int history_total_bytes PARAMS((void)); + +/* Moving around the history list. */ + +/* Set the position in the history list to POS. */ +extern int history_set_pos PARAMS((int)); + +/* Back up history_offset to the previous history entry, and return + a pointer to that entry. If there is no previous entry, return + a NULL pointer. */ +extern HIST_ENTRY *previous_history PARAMS((void)); + +/* Move history_offset forward to the next item in the input_history, + and return the a pointer to that entry. If there is no next entry, + return a NULL pointer. */ +extern HIST_ENTRY *next_history PARAMS((void)); + +/* Searching the history list. */ + +/* Search the history for STRING, starting at history_offset. + If DIRECTION < 0, then the search is through previous entries, + else through subsequent. If the string is found, then + current_history () is the history entry, and the value of this function + is the offset in the line of that history entry that the string was + found in. Otherwise, nothing is changed, and a -1 is returned. */ +extern int history_search PARAMS((const char *, int)); + +/* Search the history for STRING, starting at history_offset. + The search is anchored: matching lines must begin with string. + DIRECTION is as in history_search(). */ +extern int history_search_prefix PARAMS((const char *, int)); + +/* Search for STRING in the history list, starting at POS, an + absolute index into the list. DIR, if negative, says to search + backwards from POS, else forwards. + Returns the absolute index of the history element where STRING + was found, or -1 otherwise. */ +extern int history_search_pos PARAMS((const char *, int, int)); + +/* Managing the history file. */ + +/* Add the contents of FILENAME to the history list, a line at a time. + If FILENAME is NULL, then read from ~/.history. Returns 0 if + successful, or errno if not. */ +extern int read_history PARAMS((const char *)); + +/* Read a range of lines from FILENAME, adding them to the history list. + Start reading at the FROM'th line and end at the TO'th. If FROM + is zero, start at the beginning. If TO is less than FROM, read + until the end of the file. If FILENAME is NULL, then read from + ~/.history. Returns 0 if successful, or errno if not. */ +extern int read_history_range PARAMS((const char *, int, int)); + +/* Write the current history to FILENAME. If FILENAME is NULL, + then write the history list to ~/.history. Values returned + are as in read_history (). */ +extern int write_history PARAMS((const char *)); + +/* Append NELEMENT entries to FILENAME. The entries appended are from + the end of the list minus NELEMENTs up to the end of the list. */ +extern int append_history PARAMS((int, const char *)); + +/* Truncate the history file, leaving only the last NLINES lines. */ +extern int history_truncate_file PARAMS((const char *, int)); + +/* History expansion. */ + +/* Expand the string STRING, placing the result into OUTPUT, a pointer + to a string. Returns: + + 0) If no expansions took place (or, if the only change in + the text was the de-slashifying of the history expansion + character) + 1) If expansions did take place + -1) If there was an error in expansion. + 2) If the returned line should just be printed. + + If an error occurred in expansion, then OUTPUT contains a descriptive + error message. */ +extern int history_expand PARAMS((char *, char **)); + +/* Extract a string segment consisting of the FIRST through LAST + arguments present in STRING. Arguments are broken up as in + the shell. */ +extern char *history_arg_extract PARAMS((int, int, const char *)); + +/* Return the text of the history event beginning at the current + offset into STRING. Pass STRING with *INDEX equal to the + history_expansion_char that begins this specification. + DELIMITING_QUOTE is a character that is allowed to end the string + specification for what to search for in addition to the normal + characters `:', ` ', `\t', `\n', and sometimes `?'. */ +extern char *get_history_event PARAMS((const char *, int *, int)); + +/* Return an array of tokens, much as the shell might. The tokens are + parsed out of STRING. */ +extern char **history_tokenize PARAMS((const char *)); + +/* Exported history variables. */ +extern int history_base; +extern int history_length; +extern int history_max_entries; +extern int history_offset; + +extern int history_lines_read_from_file; +extern int history_lines_written_to_file; + +extern char history_expansion_char; +extern char history_subst_char; +extern char *history_word_delimiters; +extern char history_comment_char; +extern char *history_no_expand_chars; +extern char *history_search_delimiter_chars; + +extern int history_quotes_inhibit_expansion; +extern int history_quoting_state; + +extern int history_write_timestamps; + +/* These two are undocumented; the second is reserved for future use */ +extern int history_multiline_entries; +extern int history_file_version; + +/* Backwards compatibility */ +extern int max_input_history; + +/* If set, this function is called to decide whether or not a particular + history expansion should be treated as a special case for the calling + application and not expanded. */ +extern rl_linebuf_func_t *history_inhibit_expansion_function; + +#ifdef __cplusplus +} +#endif + +#endif /* !_HISTORY_H_ */ diff --git a/readline/readline/histsearch.c b/readline/readline/histsearch.c new file mode 100644 index 0000000000..7a426c9678 --- /dev/null +++ b/readline/readline/histsearch.c @@ -0,0 +1,287 @@ +/* histsearch.c -- searching the history list. */ + +/* Copyright (C) 1989, 1992-2009,2017 Free Software Foundation, Inc. + + This file contains the GNU History Library (History), a set of + routines for managing the text of previously typed lines. + + History is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + History is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with History. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include +# endif +# include +#endif + +#if defined (HAVE_FNMATCH) +# include +#endif + +#include "history.h" +#include "histlib.h" +#include "xmalloc.h" + +/* The list of alternate characters that can delimit a history search + string. */ +char *history_search_delimiter_chars = (char *)NULL; + +static int history_search_internal PARAMS((const char *, int, int)); + +/* Search the history for STRING, starting at history_offset. + If DIRECTION < 0, then the search is through previous entries, else + through subsequent. If ANCHORED is non-zero, the string must + appear at the beginning of a history line, otherwise, the string + may appear anywhere in the line. If the string is found, then + current_history () is the history entry, and the value of this + function is the offset in the line of that history entry that the + string was found in. Otherwise, nothing is changed, and a -1 is + returned. */ + +static int +history_search_internal (const char *string, int direction, int flags) +{ + register int i, reverse; + register char *line; + register int line_index; + int string_len, anchored, patsearch; + HIST_ENTRY **the_history; /* local */ + + i = history_offset; + reverse = (direction < 0); + anchored = (flags & ANCHORED_SEARCH); +#if defined (HAVE_FNMATCH) + patsearch = (flags & PATTERN_SEARCH); +#else + patsearch = 0; +#endif + + /* Take care of trivial cases first. */ + if (string == 0 || *string == '\0') + return (-1); + + if (!history_length || ((i >= history_length) && !reverse)) + return (-1); + + if (reverse && (i >= history_length)) + i = history_length - 1; + +#define NEXT_LINE() do { if (reverse) i--; else i++; } while (0) + + the_history = history_list (); + string_len = strlen (string); + while (1) + { + /* Search each line in the history list for STRING. */ + + /* At limit for direction? */ + if ((reverse && i < 0) || (!reverse && i == history_length)) + return (-1); + + line = the_history[i]->line; + line_index = strlen (line); + + /* If STRING is longer than line, no match. */ + if (patsearch == 0 && (string_len > line_index)) + { + NEXT_LINE (); + continue; + } + + /* Handle anchored searches first. */ + if (anchored == ANCHORED_SEARCH) + { +#if defined (HAVE_FNMATCH) + if (patsearch) + { + if (fnmatch (string, line, 0) == 0) + { + history_offset = i; + return (0); + } + } + else +#endif + if (STREQN (string, line, string_len)) + { + history_offset = i; + return (0); + } + + NEXT_LINE (); + continue; + } + + /* Do substring search. */ + if (reverse) + { + line_index -= (patsearch == 0) ? string_len : 1; + + while (line_index >= 0) + { +#if defined (HAVE_FNMATCH) + if (patsearch) + { + if (fnmatch (string, line + line_index, 0) == 0) + { + history_offset = i; + return (line_index); + } + } + else +#endif + if (STREQN (string, line + line_index, string_len)) + { + history_offset = i; + return (line_index); + } + line_index--; + } + } + else + { + register int limit; + + limit = line_index - string_len + 1; + line_index = 0; + + while (line_index < limit) + { +#if defined (HAVE_FNMATCH) + if (patsearch) + { + if (fnmatch (string, line + line_index, 0) == 0) + { + history_offset = i; + return (line_index); + } + } + else +#endif + if (STREQN (string, line + line_index, string_len)) + { + history_offset = i; + return (line_index); + } + line_index++; + } + } + NEXT_LINE (); + } +} + +int +_hs_history_patsearch (const char *string, int direction, int flags) +{ + char *pat; + size_t len, start; + int ret, unescaped_backslash; + +#if defined (HAVE_FNMATCH) + /* Assume that the string passed does not have a leading `^' and any + anchored search request is captured in FLAGS */ + len = strlen (string); + ret = len - 1; + /* fnmatch is required to reject a pattern that ends with an unescaped + backslash */ + if (unescaped_backslash = (string[ret] == '\\')) + { + while (ret > 0 && string[--ret] == '\\') + unescaped_backslash = 1 - unescaped_backslash; + } + if (unescaped_backslash) + return -1; + pat = (char *)xmalloc (len + 3); + /* If the search string is not anchored, we'll be calling fnmatch (assuming + we have it). Prefix a `*' to the front of the search string so we search + anywhere in the line. */ + if ((flags & ANCHORED_SEARCH) == 0 && string[0] != '*') + { + pat[0] = '*'; + start = 1; + len++; + } + else + { + start = 0; + } + + /* Attempt to reduce the number of searches by tacking a `*' onto the end + of a pattern that doesn't have one. Assume a pattern that ends in a + backslash contains an even number of trailing backslashes; we check + above */ + strcpy (pat + start, string); + if (pat[len - 1] != '*') + { + pat[len] = '*'; /* XXX */ + pat[len+1] = '\0'; + } +#else + pat = string; +#endif + + ret = history_search_internal (pat, direction, flags|PATTERN_SEARCH); + + if (pat != string) + free (pat); + return ret; +} + +/* Do a non-anchored search for STRING through the history in DIRECTION. */ +int +history_search (const char *string, int direction) +{ + return (history_search_internal (string, direction, NON_ANCHORED_SEARCH)); +} + +/* Do an anchored search for string through the history in DIRECTION. */ +int +history_search_prefix (const char *string, int direction) +{ + return (history_search_internal (string, direction, ANCHORED_SEARCH)); +} + +/* Search for STRING in the history list. DIR is < 0 for searching + backwards. POS is an absolute index into the history list at + which point to begin searching. */ +int +history_search_pos (const char *string, int dir, int pos) +{ + int ret, old; + + old = where_history (); + history_set_pos (pos); + if (history_search (string, dir) == -1) + { + history_set_pos (old); + return (-1); + } + ret = where_history (); + history_set_pos (old); + return ret; +} diff --git a/readline/readline/input.c b/readline/readline/input.c new file mode 100644 index 0000000000..95ace842ba --- /dev/null +++ b/readline/readline/input.c @@ -0,0 +1,694 @@ +/* input.c -- character input functions for readline. */ + +/* Copyright (C) 1994-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (__TANDEM) +# include +#endif + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#if defined (HAVE_SYS_FILE_H) +# include +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +#include "posixselect.h" + +#if defined (FIONREAD_IN_SYS_IOCTL) +# include +#endif + +#include +#include + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +/* Some standard library routines. */ +#include "readline.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +/* What kind of non-blocking I/O do we have? */ +#if !defined (O_NDELAY) && defined (O_NONBLOCK) +# define O_NDELAY O_NONBLOCK /* Posix style */ +#endif + +#if defined (HAVE_PSELECT) +extern sigset_t _rl_orig_sigset; +#endif + +/* Non-null means it is a pointer to a function to run while waiting for + character input. */ +rl_hook_func_t *rl_event_hook = (rl_hook_func_t *)NULL; + +/* A function to call if a read(2) is interrupted by a signal. */ +rl_hook_func_t *rl_signal_event_hook = (rl_hook_func_t *)NULL; + +/* A function to replace _rl_input_available for applications using the + callback interface. */ +rl_hook_func_t *rl_input_available_hook = (rl_hook_func_t *)NULL; + +rl_getc_func_t *rl_getc_function = rl_getc; + +static int _keyboard_input_timeout = 100000; /* 0.1 seconds; it's in usec */ + +static int ibuffer_space PARAMS((void)); +static int rl_get_char PARAMS((int *)); +static int rl_gather_tyi PARAMS((void)); + +#if defined (_WIN32) && !defined (__CYGWIN__) + +/* 'isatty' in the Windows runtime returns non-zero for every + character device, including the null device. Repair that. */ +#include +#include +#define WIN32_LEAN_AND_MEAN 1 +#include + +int w32_isatty (int fd) +{ + if (_isatty(fd)) + { + HANDLE h; + DWORD ignored; + + if ((h = (HANDLE) _get_osfhandle (fd)) == INVALID_HANDLE_VALUE) + { + errno = EBADF; + return 0; + } + if (GetConsoleMode (h, &ignored) != 0) + return 1; + } + errno = ENOTTY; + return 0; +} + +#define isatty(x) w32_isatty(x) +#endif + +/* **************************************************************** */ +/* */ +/* Character Input Buffering */ +/* */ +/* **************************************************************** */ + +static int pop_index, push_index; +static unsigned char ibuffer[512]; +static int ibuffer_len = sizeof (ibuffer) - 1; + +#define any_typein (push_index != pop_index) + +int +_rl_any_typein (void) +{ + return any_typein; +} + +int +_rl_pushed_input_available (void) +{ + return (push_index != pop_index); +} + +/* Return the amount of space available in the buffer for stuffing + characters. */ +static int +ibuffer_space (void) +{ + if (pop_index > push_index) + return (pop_index - push_index - 1); + else + return (ibuffer_len - (push_index - pop_index)); +} + +/* Get a key from the buffer of characters to be read. + Return the key in KEY. + Result is non-zero if there was a key, or 0 if there wasn't. */ +static int +rl_get_char (int *key) +{ + if (push_index == pop_index) + return (0); + + *key = ibuffer[pop_index++]; +#if 0 + if (pop_index >= ibuffer_len) +#else + if (pop_index > ibuffer_len) +#endif + pop_index = 0; + + return (1); +} + +/* Stuff KEY into the *front* of the input buffer. + Returns non-zero if successful, zero if there is + no space left in the buffer. */ +int +_rl_unget_char (int key) +{ + if (ibuffer_space ()) + { + pop_index--; + if (pop_index < 0) + pop_index = ibuffer_len; + ibuffer[pop_index] = key; + return (1); + } + return (0); +} + +/* If a character is available to be read, then read it and stuff it into + IBUFFER. Otherwise, just return. Returns number of characters read + (0 if none available) and -1 on error (EIO). */ +static int +rl_gather_tyi (void) +{ + int tty; + register int tem, result; + int chars_avail, k; + char input; +#if defined(HAVE_SELECT) + fd_set readfds, exceptfds; + struct timeval timeout; +#endif + + chars_avail = 0; + input = 0; + tty = fileno (rl_instream); + +#if defined (HAVE_SELECT) + FD_ZERO (&readfds); + FD_ZERO (&exceptfds); + FD_SET (tty, &readfds); + FD_SET (tty, &exceptfds); + USEC_TO_TIMEVAL (_keyboard_input_timeout, timeout); + result = select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout); + if (result <= 0) + return 0; /* Nothing to read. */ +#endif + + result = -1; + errno = 0; +#if defined (FIONREAD) + result = ioctl (tty, FIONREAD, &chars_avail); + if (result == -1 && errno == EIO) + return -1; + if (result == -1) + chars_avail = 0; +#endif + +#if defined (O_NDELAY) + if (result == -1) + { + tem = fcntl (tty, F_GETFL, 0); + + fcntl (tty, F_SETFL, (tem | O_NDELAY)); + chars_avail = read (tty, &input, 1); + + fcntl (tty, F_SETFL, tem); + if (chars_avail == -1 && errno == EAGAIN) + return 0; + if (chars_avail == -1 && errno == EIO) + return -1; + if (chars_avail == 0) /* EOF */ + { + rl_stuff_char (EOF); + return (0); + } + } +#endif /* O_NDELAY */ + +#if defined (__MINGW32__) + /* Use getch/_kbhit to check for available console input, in the same way + that we read it normally. */ + chars_avail = isatty (tty) ? _kbhit () : 0; + result = 0; +#endif + + /* If there's nothing available, don't waste time trying to read + something. */ + if (chars_avail <= 0) + return 0; + + tem = ibuffer_space (); + + if (chars_avail > tem) + chars_avail = tem; + + /* One cannot read all of the available input. I can only read a single + character at a time, or else programs which require input can be + thwarted. If the buffer is larger than one character, I lose. + Damn! */ + if (tem < ibuffer_len) + chars_avail = 0; + + if (result != -1) + { + while (chars_avail--) + { + RL_CHECK_SIGNALS (); + k = (*rl_getc_function) (rl_instream); + if (rl_stuff_char (k) == 0) + break; /* some problem; no more room */ + if (k == NEWLINE || k == RETURN) + break; + } + } + else + { + if (chars_avail) + rl_stuff_char (input); + } + + return 1; +} + +int +rl_set_keyboard_input_timeout (int u) +{ + int o; + + o = _keyboard_input_timeout; + if (u >= 0) + _keyboard_input_timeout = u; + return (o); +} + +/* Is there input available to be read on the readline input file + descriptor? Only works if the system has select(2) or FIONREAD. + Uses the value of _keyboard_input_timeout as the timeout; if another + readline function wants to specify a timeout and not leave it up to + the user, it should use _rl_input_queued(timeout_value_in_microseconds) + instead. */ +int +_rl_input_available (void) +{ +#if defined(HAVE_SELECT) + fd_set readfds, exceptfds; + struct timeval timeout; +#endif +#if !defined (HAVE_SELECT) && defined(FIONREAD) + int chars_avail; +#endif + int tty; + + if (rl_input_available_hook) + return (*rl_input_available_hook) (); + + tty = fileno (rl_instream); + +#if defined (HAVE_SELECT) + FD_ZERO (&readfds); + FD_ZERO (&exceptfds); + FD_SET (tty, &readfds); + FD_SET (tty, &exceptfds); + timeout.tv_sec = 0; + timeout.tv_usec = _keyboard_input_timeout; + return (select (tty + 1, &readfds, (fd_set *)NULL, &exceptfds, &timeout) > 0); +#else + +#if defined (FIONREAD) + if (ioctl (tty, FIONREAD, &chars_avail) == 0) + return (chars_avail); +#endif + +#endif + +#if defined (__MINGW32__) + if (isatty (tty)) + return (_kbhit ()); +#endif + + return 0; +} + +int +_rl_input_queued (int t) +{ + int old_timeout, r; + + old_timeout = rl_set_keyboard_input_timeout (t); + r = _rl_input_available (); + rl_set_keyboard_input_timeout (old_timeout); + return r; +} + +void +_rl_insert_typein (int c) +{ + int key, t, i; + char *string; + + i = key = 0; + string = (char *)xmalloc (ibuffer_len + 1); + string[i++] = (char) c; + + while ((t = rl_get_char (&key)) && + _rl_keymap[key].type == ISFUNC && + _rl_keymap[key].function == rl_insert) + string[i++] = key; + + if (t) + _rl_unget_char (key); + + string[i] = '\0'; + rl_insert_text (string); + xfree (string); +} + +/* Add KEY to the buffer of characters to be read. Returns 1 if the + character was stuffed correctly; 0 otherwise. */ +int +rl_stuff_char (int key) +{ + if (ibuffer_space () == 0) + return 0; + + if (key == EOF) + { + key = NEWLINE; + rl_pending_input = EOF; + RL_SETSTATE (RL_STATE_INPUTPENDING); + } + ibuffer[push_index++] = key; +#if 0 + if (push_index >= ibuffer_len) +#else + if (push_index > ibuffer_len) +#endif + push_index = 0; + + return 1; +} + +/* Make C be the next command to be executed. */ +int +rl_execute_next (int c) +{ + rl_pending_input = c; + RL_SETSTATE (RL_STATE_INPUTPENDING); + return 0; +} + +/* Clear any pending input pushed with rl_execute_next() */ +int +rl_clear_pending_input (void) +{ + rl_pending_input = 0; + RL_UNSETSTATE (RL_STATE_INPUTPENDING); + return 0; +} + +/* **************************************************************** */ +/* */ +/* Character Input */ +/* */ +/* **************************************************************** */ + +/* Read a key, including pending input. */ +int +rl_read_key (void) +{ + int c, r; + + if (rl_pending_input) + { + c = rl_pending_input; /* XXX - cast to unsigned char if > 0? */ + rl_clear_pending_input (); + } + else + { + /* If input is coming from a macro, then use that. */ + if (c = _rl_next_macro_key ()) + return ((unsigned char)c); + + /* If the user has an event function, then call it periodically. */ + if (rl_event_hook) + { + while (rl_event_hook) + { + if (rl_get_char (&c) != 0) + break; + + if ((r = rl_gather_tyi ()) < 0) /* XXX - EIO */ + { + rl_done = 1; + return (errno == EIO ? (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF) : '\n'); + } + else if (r > 0) /* read something */ + continue; + + RL_CHECK_SIGNALS (); + if (rl_done) /* XXX - experimental */ + return ('\n'); + (*rl_event_hook) (); + } + } + else + { + if (rl_get_char (&c) == 0) + c = (*rl_getc_function) (rl_instream); +/* fprintf(stderr, "rl_read_key: calling RL_CHECK_SIGNALS: _rl_caught_signal = %d", _rl_caught_signal); */ + RL_CHECK_SIGNALS (); + } + } + + return (c); +} + +int +rl_getc (FILE *stream) +{ + int result; + unsigned char c; +#if defined (HAVE_PSELECT) + sigset_t empty_set; + fd_set readfds; +#endif + + while (1) + { + RL_CHECK_SIGNALS (); + + /* We know at this point that _rl_caught_signal == 0 */ + +#if defined (__MINGW32__) + if (isatty (fileno (stream))) + return (_getch ()); /* "There is no error return." */ +#endif + result = 0; +#if defined (HAVE_PSELECT) + FD_ZERO (&readfds); + FD_SET (fileno (stream), &readfds); +# if defined (HANDLE_SIGNALS) + result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &_rl_orig_sigset); +# else + sigemptyset (&empty_set); + sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &empty_set); + result = pselect (fileno (stream) + 1, &readfds, NULL, NULL, NULL, &empty_set); +# endif /* HANDLE_SIGNALS */ +#endif + if (result >= 0) + result = read (fileno (stream), &c, sizeof (unsigned char)); + + if (result == sizeof (unsigned char)) + return (c); + + /* If zero characters are returned, then the file that we are + reading from is empty! Return EOF in that case. */ + if (result == 0) + return (EOF); + +#if defined (__BEOS__) + if (errno == EINTR) + continue; +#endif + +#if defined (EWOULDBLOCK) +# define X_EWOULDBLOCK EWOULDBLOCK +#else +# define X_EWOULDBLOCK -99 +#endif + +#if defined (EAGAIN) +# define X_EAGAIN EAGAIN +#else +# define X_EAGAIN -99 +#endif + + if (errno == X_EWOULDBLOCK || errno == X_EAGAIN) + { + if (sh_unset_nodelay_mode (fileno (stream)) < 0) + return (EOF); + continue; + } + +#undef X_EWOULDBLOCK +#undef X_EAGAIN + +/* fprintf(stderr, "rl_getc: result = %d errno = %d\n", result, errno); */ + +handle_error: + /* If the error that we received was EINTR, then try again, + this is simply an interrupted system call to read (). We allow + the read to be interrupted if we caught SIGHUP, SIGTERM, or any + of the other signals readline treats specially. If the + application sets an event hook, call it for other signals. + Otherwise (not EINTR), some error occurred, also signifying EOF. */ + if (errno != EINTR) + return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF); + /* fatal signals of interest */ +#if defined (SIGHUP) + else if (_rl_caught_signal == SIGHUP || _rl_caught_signal == SIGTERM) +#else + else if (_rl_caught_signal == SIGTERM) +#endif + return (RL_ISSTATE (RL_STATE_READCMD) ? READERR : EOF); + /* keyboard-generated signals of interest */ +#if defined (SIGQUIT) + else if (_rl_caught_signal == SIGINT || _rl_caught_signal == SIGQUIT) +#else + else if (_rl_caught_signal == SIGINT) +#endif + RL_CHECK_SIGNALS (); + /* non-keyboard-generated signals of interest */ +#if defined (SIGWINCH) + else if (_rl_caught_signal == SIGWINCH) + RL_CHECK_SIGNALS (); +#endif /* SIGWINCH */ +#if defined (SIGALRM) + else if (_rl_caught_signal == SIGALRM +# if defined (SIGVTALRM) + || _rl_caught_signal == SIGVTALRM +# endif + ) + RL_CHECK_SIGNALS (); +#endif /* SIGALRM */ + + if (rl_signal_event_hook) + (*rl_signal_event_hook) (); + } +} + +#if defined (HANDLE_MULTIBYTE) +/* read multibyte char */ +int +_rl_read_mbchar (char *mbchar, int size) +{ + int mb_len, c; + size_t mbchar_bytes_length; + wchar_t wc; + mbstate_t ps, ps_back; + + memset(&ps, 0, sizeof (mbstate_t)); + memset(&ps_back, 0, sizeof (mbstate_t)); + + mb_len = 0; + while (mb_len < size) + { + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (c < 0) + break; + + mbchar[mb_len++] = c; + + mbchar_bytes_length = mbrtowc (&wc, mbchar, mb_len, &ps); + if (mbchar_bytes_length == (size_t)(-1)) + break; /* invalid byte sequence for the current locale */ + else if (mbchar_bytes_length == (size_t)(-2)) + { + /* shorted bytes */ + ps = ps_back; + continue; + } + else if (mbchar_bytes_length == 0) + { + mbchar[0] = '\0'; /* null wide character */ + mb_len = 1; + break; + } + else if (mbchar_bytes_length > (size_t)(0)) + break; + } + + return mb_len; +} + +/* Read a multibyte-character string whose first character is FIRST into + the buffer MB of length MLEN. Returns the last character read, which + may be FIRST. Used by the search functions, among others. Very similar + to _rl_read_mbchar. */ +int +_rl_read_mbstring (int first, char *mb, int mlen) +{ + int i, c, n; + mbstate_t ps; + + c = first; + memset (mb, 0, mlen); + for (i = 0; c >= 0 && i < mlen; i++) + { + mb[i] = (char)c; + memset (&ps, 0, sizeof (mbstate_t)); + n = _rl_get_char_len (mb, &ps); + if (n == -2) + { + /* Read more for multibyte character */ + RL_SETSTATE (RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE (RL_STATE_MOREINPUT); + } + else + break; + } + return c; +} +#endif /* HANDLE_MULTIBYTE */ diff --git a/readline/readline/isearch.c b/readline/readline/isearch.c new file mode 100644 index 0000000000..d6c5904177 --- /dev/null +++ b/readline/readline/isearch.c @@ -0,0 +1,829 @@ +/* isearch.c - incremental searching */ + +/* **************************************************************** */ +/* */ +/* I-Search and Searching */ +/* */ +/* **************************************************************** */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif + +#include "rldefs.h" +#include "rlmbutil.h" + +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +/* Variables exported to other files in the readline library. */ +char *_rl_isearch_terminators = (char *)NULL; + +_rl_search_cxt *_rl_iscxt = 0; + +/* Variables imported from other files in the readline library. */ +extern HIST_ENTRY *_rl_saved_line_for_history; + +static int rl_search_history PARAMS((int, int)); + +static _rl_search_cxt *_rl_isearch_init PARAMS((int)); +static void _rl_isearch_fini PARAMS((_rl_search_cxt *)); + +/* Last line found by the current incremental search, so we don't `find' + identical lines many times in a row. Now part of isearch context. */ +/* static char *prev_line_found; */ + +/* Last search string and its length. */ +static char *last_isearch_string; +static int last_isearch_string_len; + +static char * const default_isearch_terminators = "\033\012"; + +_rl_search_cxt * +_rl_scxt_alloc (int type, int flags) +{ + _rl_search_cxt *cxt; + + cxt = (_rl_search_cxt *)xmalloc (sizeof (_rl_search_cxt)); + + cxt->type = type; + cxt->sflags = flags; + + cxt->search_string = 0; + cxt->search_string_size = cxt->search_string_index = 0; + + cxt->lines = 0; + cxt->allocated_line = 0; + cxt->hlen = cxt->hindex = 0; + + cxt->save_point = rl_point; + cxt->save_mark = rl_mark; + cxt->save_line = where_history (); + cxt->last_found_line = cxt->save_line; + cxt->prev_line_found = 0; + + cxt->save_undo_list = 0; + + cxt->keymap = _rl_keymap; + cxt->okeymap = _rl_keymap; + + cxt->history_pos = 0; + cxt->direction = 0; + + cxt->prevc = cxt->lastc = 0; + + cxt->sline = 0; + cxt->sline_len = cxt->sline_index = 0; + + cxt->search_terminators = 0; + + return cxt; +} + +void +_rl_scxt_dispose (_rl_search_cxt *cxt, int flags) +{ + FREE (cxt->search_string); + FREE (cxt->allocated_line); + FREE (cxt->lines); + + xfree (cxt); +} + +/* Search backwards through the history looking for a string which is typed + interactively. Start with the current line. */ +int +rl_reverse_search_history (int sign, int key) +{ + return (rl_search_history (-sign, key)); +} + +/* Search forwards through the history looking for a string which is typed + interactively. Start with the current line. */ +int +rl_forward_search_history (int sign, int key) +{ + return (rl_search_history (sign, key)); +} + +/* Display the current state of the search in the echo-area. + SEARCH_STRING contains the string that is being searched for, + DIRECTION is zero for forward, or non-zero for reverse, + WHERE is the history list number of the current line. If it is + -1, then this line is the starting one. */ +static void +rl_display_search (char *search_string, int flags, int where) +{ + char *message; + int msglen, searchlen; + + searchlen = (search_string && *search_string) ? strlen (search_string) : 0; + + message = (char *)xmalloc (searchlen + 64); + msglen = 0; + +#if defined (NOTDEF) + if (where != -1) + { + sprintf (message, "[%d]", where + history_base); + msglen = strlen (message); + } +#endif /* NOTDEF */ + + message[msglen++] = '('; + + if (flags & SF_FAILED) + { + strcpy (message + msglen, "failed "); + msglen += 7; + } + + if (flags & SF_REVERSE) + { + strcpy (message + msglen, "reverse-"); + msglen += 8; + } + + strcpy (message + msglen, "i-search)`"); + msglen += 10; + + if (search_string) + { + strcpy (message + msglen, search_string); + msglen += searchlen; + } + + strcpy (message + msglen, "': "); + + rl_message ("%s", message); + xfree (message); + (*rl_redisplay_function) (); +} + +static _rl_search_cxt * +_rl_isearch_init (int direction) +{ + _rl_search_cxt *cxt; + register int i; + HIST_ENTRY **hlist; + + cxt = _rl_scxt_alloc (RL_SEARCH_ISEARCH, 0); + if (direction < 0) + cxt->sflags |= SF_REVERSE; + + cxt->search_terminators = _rl_isearch_terminators ? _rl_isearch_terminators + : default_isearch_terminators; + + /* Create an array of pointers to the lines that we want to search. */ + hlist = history_list (); + rl_maybe_replace_line (); + i = 0; + if (hlist) + for (i = 0; hlist[i]; i++); + + /* Allocate space for this many lines, +1 for the current input line, + and remember those lines. */ + cxt->lines = (char **)xmalloc ((1 + (cxt->hlen = i)) * sizeof (char *)); + for (i = 0; i < cxt->hlen; i++) + cxt->lines[i] = hlist[i]->line; + + if (_rl_saved_line_for_history) + cxt->lines[i] = _rl_saved_line_for_history->line; + else + { + /* Keep track of this so we can free it. */ + cxt->allocated_line = (char *)xmalloc (1 + strlen (rl_line_buffer)); + strcpy (cxt->allocated_line, &rl_line_buffer[0]); + cxt->lines[i] = cxt->allocated_line; + } + + cxt->hlen++; + + /* The line where we start the search. */ + cxt->history_pos = cxt->save_line; + + rl_save_prompt (); + + /* Initialize search parameters. */ + cxt->search_string = (char *)xmalloc (cxt->search_string_size = 128); + cxt->search_string[cxt->search_string_index = 0] = '\0'; + + /* Normalize DIRECTION into 1 or -1. */ + cxt->direction = (direction >= 0) ? 1 : -1; + + cxt->sline = rl_line_buffer; + cxt->sline_len = strlen (cxt->sline); + cxt->sline_index = rl_point; + + _rl_iscxt = cxt; /* save globally */ + + return cxt; +} + +static void +_rl_isearch_fini (_rl_search_cxt *cxt) +{ + /* First put back the original state. */ + rl_replace_line (cxt->lines[cxt->save_line], 0); + + rl_restore_prompt (); + + /* Save the search string for possible later use. */ + FREE (last_isearch_string); + last_isearch_string = cxt->search_string; + last_isearch_string_len = cxt->search_string_index; + cxt->search_string = 0; + + if (cxt->last_found_line < cxt->save_line) + rl_get_previous_history (cxt->save_line - cxt->last_found_line, 0); + else + rl_get_next_history (cxt->last_found_line - cxt->save_line, 0); + + /* If the string was not found, put point at the end of the last matching + line. If last_found_line == orig_line, we didn't find any matching + history lines at all, so put point back in its original position. */ + if (cxt->sline_index < 0) + { + if (cxt->last_found_line == cxt->save_line) + cxt->sline_index = cxt->save_point; + else + cxt->sline_index = strlen (rl_line_buffer); + rl_mark = cxt->save_mark; + } + + rl_point = cxt->sline_index; + /* Don't worry about where to put the mark here; rl_get_previous_history + and rl_get_next_history take care of it. */ + _rl_fix_point (0); + + rl_clear_message (); +} + +int +_rl_search_getchar (_rl_search_cxt *cxt) +{ + int c; + + /* Read a key and decide how to proceed. */ + RL_SETSTATE(RL_STATE_MOREINPUT); + c = cxt->lastc = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + +#if defined (HANDLE_MULTIBYTE) + /* This ends up with C (and LASTC) being set to the last byte of the + multibyte character. In most cases c == lastc == mb[0] */ + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + c = cxt->lastc = _rl_read_mbstring (cxt->lastc, cxt->mb, MB_LEN_MAX); +#endif + + RL_CHECK_SIGNALS (); + return c; +} + +#define ENDSRCH_CHAR(c) \ + ((CTRL_CHAR (c) || META_CHAR (c) || (c) == RUBOUT) && ((c) != CTRL ('G'))) + +/* Process just-read character C according to isearch context CXT. Return + -1 if the caller should just free the context and return, 0 if we should + break out of the loop, and 1 if we should continue to read characters. */ +int +_rl_isearch_dispatch (_rl_search_cxt *cxt, int c) +{ + int n, wstart, wlen, limit, cval, incr; + char *paste; + size_t pastelen; + int j; + rl_command_func_t *f; + + f = (rl_command_func_t *)NULL; + + if (c < 0) + { + cxt->sflags |= SF_FAILED; + cxt->history_pos = cxt->last_found_line; + return -1; + } + + /* If we are moving into a new keymap, modify cxt->keymap and go on. + This can be a problem if c == ESC and we want to terminate the + incremental search, so we check */ + if (c >= 0 && cxt->keymap[c].type == ISKMAP && strchr (cxt->search_terminators, cxt->lastc) == 0) + { + /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued + takes microseconds, so multiply by 1000. If we don't get any + additional input and this keymap shadows another function, process + that key as if it was all we read. */ + if (_rl_keyseq_timeout > 0 && + RL_ISSTATE (RL_STATE_CALLBACK) == 0 && + RL_ISSTATE (RL_STATE_INPUTPENDING) == 0 && + _rl_pushed_input_available () == 0 && + ((Keymap)(cxt->keymap[c].function))[ANYOTHERKEY].function && + _rl_input_queued (_rl_keyseq_timeout*1000) == 0) + goto add_character; + + cxt->okeymap = cxt->keymap; + cxt->keymap = FUNCTION_TO_KEYMAP (cxt->keymap, c); + cxt->sflags |= SF_CHGKMAP; + /* XXX - we should probably save this sequence, so we can do + something useful if this doesn't end up mapping to a command we + interpret here. Right now we just save the most recent character + that caused the index into a new keymap. */ + cxt->prevc = c; +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + if (cxt->mb[1] == 0) + { + cxt->pmb[0] = c; /* XXX should be == cxt->mb[0] */ + cxt->pmb[1] = '\0'; + } + else + memcpy (cxt->pmb, cxt->mb, sizeof (cxt->pmb)); + } +#endif + return 1; + } + +add_character: + + /* Translate the keys we do something with to opcodes. */ + if (c >= 0 && cxt->keymap[c].type == ISFUNC) + { + f = cxt->keymap[c].function; + + if (f == rl_reverse_search_history) + cxt->lastc = (cxt->sflags & SF_REVERSE) ? -1 : -2; + else if (f == rl_forward_search_history) + cxt->lastc = (cxt->sflags & SF_REVERSE) ? -2 : -1; + else if (f == rl_rubout) + cxt->lastc = -3; + else if (c == CTRL ('G') || f == rl_abort) + cxt->lastc = -4; + else if (c == CTRL ('W') || f == rl_unix_word_rubout) /* XXX */ + cxt->lastc = -5; + else if (c == CTRL ('Y') || f == rl_yank) /* XXX */ + cxt->lastc = -6; + else if (f == rl_bracketed_paste_begin) + cxt->lastc = -7; + } + + /* If we changed the keymap earlier while translating a key sequence into + a command, restore it now that we've succeeded. */ + if (cxt->sflags & SF_CHGKMAP) + { + cxt->keymap = cxt->okeymap; + cxt->sflags &= ~SF_CHGKMAP; + /* If we indexed into a new keymap, but didn't map to a command that + affects the search (lastc > 0), and the character that mapped to a + new keymap would have ended the search (ENDSRCH_CHAR(cxt->prevc)), + handle that now as if the previous char would have ended the search + and we would have read the current character. */ + /* XXX - should we check cxt->mb? */ + if (cxt->lastc > 0 && ENDSRCH_CHAR (cxt->prevc)) + { + rl_stuff_char (cxt->lastc); + rl_execute_next (cxt->prevc); + /* XXX - do we insert everything in cxt->pmb? */ + return (0); + } + /* Otherwise, if the current character is mapped to self-insert or + nothing (i.e., not an editing command), and the previous character + was a keymap index, then we need to insert both the previous + character and the current character into the search string. */ + else if (cxt->lastc > 0 && cxt->prevc > 0 && + cxt->keymap[cxt->prevc].type == ISKMAP && + (f == 0 || f == rl_insert)) + { + /* Make lastc be the next character read */ + /* XXX - do we insert everything in cxt->mb? */ + rl_execute_next (cxt->lastc); + /* Dispatch on the previous character (insert into search string) */ + cxt->lastc = cxt->prevc; +#if defined (HANDLE_MULTIBYTE) + /* Have to overwrite cxt->mb here because dispatch uses it below */ + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + if (cxt->pmb[1] == 0) + { + cxt->mb[0] = cxt->lastc; /* == cxt->prevc */ + cxt->mb[1] = '\0'; + } + else + memcpy (cxt->mb, cxt->pmb, sizeof (cxt->mb)); + } +#endif + cxt->prevc = 0; + } + else if (cxt->lastc > 0 && cxt->prevc > 0 && f && f != rl_insert) + { + rl_stuff_char (cxt->lastc); + rl_execute_next (cxt->prevc); + /* XXX - do we insert everything in cxt->pmb? */ + return (0); + } + } + + /* The characters in isearch_terminators (set from the user-settable + variable isearch-terminators) are used to terminate the search but + not subsequently execute the character as a command. The default + value is "\033\012" (ESC and C-J). */ + if (cxt->lastc > 0 && strchr (cxt->search_terminators, cxt->lastc)) + { + /* ESC still terminates the search, but if there is pending + input or if input arrives within 0.1 seconds (on systems + with select(2)) it is used as a prefix character + with rl_execute_next. WATCH OUT FOR THIS! This is intended + to allow the arrow keys to be used like ^F and ^B are used + to terminate the search and execute the movement command. + XXX - since _rl_input_available depends on the application- + settable keyboard timeout value, this could alternatively + use _rl_input_queued(100000) */ + if (cxt->lastc == ESC && (_rl_pushed_input_available () || _rl_input_available ())) + rl_execute_next (ESC); + return (0); + } + +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + if (cxt->lastc >= 0 && (cxt->mb[0] && cxt->mb[1] == '\0') && ENDSRCH_CHAR (cxt->lastc)) + { + /* This sets rl_pending_input to LASTC; it will be picked up the next + time rl_read_key is called. */ + rl_execute_next (cxt->lastc); + return (0); + } + } + else +#endif + if (cxt->lastc >= 0 && ENDSRCH_CHAR (cxt->lastc)) + { + /* This sets rl_pending_input to LASTC; it will be picked up the next + time rl_read_key is called. */ + rl_execute_next (cxt->lastc); + return (0); + } + + /* Now dispatch on the character. `Opcodes' affect the search string or + state. Other characters are added to the string. */ + switch (cxt->lastc) + { + /* search again */ + case -1: + if (cxt->search_string_index == 0) + { + if (last_isearch_string) + { + cxt->search_string_size = 64 + last_isearch_string_len; + cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); + strcpy (cxt->search_string, last_isearch_string); + cxt->search_string_index = last_isearch_string_len; + rl_display_search (cxt->search_string, cxt->sflags, -1); + break; + } + return (1); + } + else if ((cxt->sflags & SF_REVERSE) && cxt->sline_index >= 0) + cxt->sline_index--; + else if (cxt->sline_index != cxt->sline_len) + cxt->sline_index++; + else + rl_ding (); + break; + + /* switch directions */ + case -2: + cxt->direction = -cxt->direction; + if (cxt->direction < 0) + cxt->sflags |= SF_REVERSE; + else + cxt->sflags &= ~SF_REVERSE; + break; + + /* delete character from search string. */ + case -3: /* C-H, DEL */ + /* This is tricky. To do this right, we need to keep a + stack of search positions for the current search, with + sentinels marking the beginning and end. But this will + do until we have a real isearch-undo. */ + if (cxt->search_string_index == 0) + rl_ding (); + else if (MB_CUR_MAX == 1 || rl_byte_oriented) + cxt->search_string[--cxt->search_string_index] = '\0'; + else + { + wstart = _rl_find_prev_mbchar (cxt->search_string, cxt->search_string_index, MB_FIND_NONZERO); + if (wstart >= 0) + cxt->search_string[cxt->search_string_index = wstart] = '\0'; + else + cxt->search_string[cxt->search_string_index = 0] = '\0'; + } + + if (cxt->search_string_index == 0) + rl_ding (); + + break; + + case -4: /* C-G, abort */ + rl_replace_line (cxt->lines[cxt->save_line], 0); + rl_point = cxt->save_point; + rl_mark = cxt->save_mark; + rl_restore_prompt(); + rl_clear_message (); + + return -1; + + case -5: /* C-W */ + /* skip over portion of line we already matched and yank word */ + wstart = rl_point + cxt->search_string_index; + if (wstart >= rl_end) + { + rl_ding (); + break; + } + + /* if not in a word, move to one. */ + cval = _rl_char_value (rl_line_buffer, wstart); + if (_rl_walphabetic (cval) == 0) + { + rl_ding (); + break; + } + n = MB_NEXTCHAR (rl_line_buffer, wstart, 1, MB_FIND_NONZERO);; + while (n < rl_end) + { + cval = _rl_char_value (rl_line_buffer, n); + if (_rl_walphabetic (cval) == 0) + break; + n = MB_NEXTCHAR (rl_line_buffer, n, 1, MB_FIND_NONZERO);; + } + wlen = n - wstart + 1; + if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size) + { + cxt->search_string_size += wlen + 1; + cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); + } + for (; wstart < n; wstart++) + cxt->search_string[cxt->search_string_index++] = rl_line_buffer[wstart]; + cxt->search_string[cxt->search_string_index] = '\0'; + break; + + case -6: /* C-Y */ + /* skip over portion of line we already matched and yank rest */ + wstart = rl_point + cxt->search_string_index; + if (wstart >= rl_end) + { + rl_ding (); + break; + } + n = rl_end - wstart + 1; + if (cxt->search_string_index + n + 1 >= cxt->search_string_size) + { + cxt->search_string_size += n + 1; + cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); + } + for (n = wstart; n < rl_end; n++) + cxt->search_string[cxt->search_string_index++] = rl_line_buffer[n]; + cxt->search_string[cxt->search_string_index] = '\0'; + break; + + case -7: /* bracketed paste */ + paste = _rl_bracketed_text (&pastelen); + if (paste == 0 || *paste == 0) + { + free (paste); + break; + } + if (cxt->search_string_index + pastelen + 1 >= cxt->search_string_size) + { + cxt->search_string_size += pastelen + 2; + cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); + } + strcpy (cxt->search_string + cxt->search_string_index, paste); + cxt->search_string_index += pastelen; + free (paste); + break; + + /* Add character to search string and continue search. */ + default: +#if defined (HANDLE_MULTIBYTE) + wlen = (cxt->mb[0] == 0 || cxt->mb[1] == 0) ? 1 : RL_STRLEN (cxt->mb); +#else + wlen = 1; +#endif + if (cxt->search_string_index + wlen + 1 >= cxt->search_string_size) + { + cxt->search_string_size += 128; /* 128 much greater than MB_CUR_MAX */ + cxt->search_string = (char *)xrealloc (cxt->search_string, cxt->search_string_size); + } +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + int j; + + if (cxt->mb[0] == 0 || cxt->mb[1] == 0) + cxt->search_string[cxt->search_string_index++] = cxt->mb[0]; + else + for (j = 0; j < wlen; ) + cxt->search_string[cxt->search_string_index++] = cxt->mb[j++]; + } + else +#endif + cxt->search_string[cxt->search_string_index++] = cxt->lastc; /* XXX - was c instead of lastc */ + cxt->search_string[cxt->search_string_index] = '\0'; + break; + } + + for (cxt->sflags &= ~(SF_FOUND|SF_FAILED);; ) + { + if (cxt->search_string_index == 0) + { + cxt->sflags |= SF_FAILED; + break; + } + + limit = cxt->sline_len - cxt->search_string_index + 1; + + /* Search the current line. */ + while ((cxt->sflags & SF_REVERSE) ? (cxt->sline_index >= 0) : (cxt->sline_index < limit)) + { + if (STREQN (cxt->search_string, cxt->sline + cxt->sline_index, cxt->search_string_index)) + { + cxt->sflags |= SF_FOUND; + break; + } + else + cxt->sline_index += cxt->direction; + + if (cxt->sline_index < 0) + { + cxt->sline_index = 0; + break; + } + } + if (cxt->sflags & SF_FOUND) + break; + + /* Move to the next line, but skip new copies of the line + we just found and lines shorter than the string we're + searching for. */ + do + { + /* Move to the next line. */ + cxt->history_pos += cxt->direction; + + /* At limit for direction? */ + if ((cxt->sflags & SF_REVERSE) ? (cxt->history_pos < 0) : (cxt->history_pos == cxt->hlen)) + { + cxt->sflags |= SF_FAILED; + break; + } + + /* We will need these later. */ + cxt->sline = cxt->lines[cxt->history_pos]; + cxt->sline_len = strlen (cxt->sline); + } + while ((cxt->prev_line_found && STREQ (cxt->prev_line_found, cxt->lines[cxt->history_pos])) || + (cxt->search_string_index > cxt->sline_len)); + + if (cxt->sflags & SF_FAILED) + { + /* XXX - reset sline_index if < 0 */ + if (cxt->sline_index < 0) + cxt->sline_index = 0; + break; + } + + /* Now set up the line for searching... */ + cxt->sline_index = (cxt->sflags & SF_REVERSE) ? cxt->sline_len - cxt->search_string_index : 0; + } + + if (cxt->sflags & SF_FAILED) + { + /* We cannot find the search string. Ding the bell. */ + rl_ding (); + cxt->history_pos = cxt->last_found_line; + rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos); + return 1; + } + + /* We have found the search string. Just display it. But don't + actually move there in the history list until the user accepts + the location. */ + if (cxt->sflags & SF_FOUND) + { + cxt->prev_line_found = cxt->lines[cxt->history_pos]; + rl_replace_line (cxt->lines[cxt->history_pos], 0); + rl_point = cxt->sline_index; + cxt->last_found_line = cxt->history_pos; + rl_display_search (cxt->search_string, cxt->sflags, (cxt->history_pos == cxt->save_line) ? -1 : cxt->history_pos); + } + + return 1; +} + +int +_rl_isearch_cleanup (_rl_search_cxt *cxt, int r) +{ + if (r >= 0) + _rl_isearch_fini (cxt); + _rl_scxt_dispose (cxt, 0); + _rl_iscxt = 0; + + RL_UNSETSTATE(RL_STATE_ISEARCH); + + return (r != 0); +} + +/* Search through the history looking for an interactively typed string. + This is analogous to i-search. We start the search in the current line. + DIRECTION is which direction to search; >= 0 means forward, < 0 means + backwards. */ +static int +rl_search_history (int direction, int invoking_key) +{ + _rl_search_cxt *cxt; /* local for now, but saved globally */ + int c, r; + + RL_SETSTATE(RL_STATE_ISEARCH); + cxt = _rl_isearch_init (direction); + + rl_display_search (cxt->search_string, cxt->sflags, -1); + + /* If we are using the callback interface, all we do is set up here and + return. The key is that we leave RL_STATE_ISEARCH set. */ + if (RL_ISSTATE (RL_STATE_CALLBACK)) + return (0); + + r = -1; + for (;;) + { + c = _rl_search_getchar (cxt); + /* We might want to handle EOF here (c == 0) */ + r = _rl_isearch_dispatch (cxt, cxt->lastc); + if (r <= 0) + break; + } + + /* The searching is over. The user may have found the string that she + was looking for, or else she may have exited a failing search. If + LINE_INDEX is -1, then that shows that the string searched for was + not found. We use this to determine where to place rl_point. */ + return (_rl_isearch_cleanup (cxt, r)); +} + +#if defined (READLINE_CALLBACKS) +/* Called from the callback functions when we are ready to read a key. The + callback functions know to call this because RL_ISSTATE(RL_STATE_ISEARCH). + If _rl_isearch_dispatch finishes searching, this function is responsible + for turning off RL_STATE_ISEARCH, which it does using _rl_isearch_cleanup. */ +int +_rl_isearch_callback (_rl_search_cxt *cxt) +{ + int c, r; + + c = _rl_search_getchar (cxt); + /* We might want to handle EOF here */ + r = _rl_isearch_dispatch (cxt, cxt->lastc); + + return (r <= 0) ? _rl_isearch_cleanup (cxt, r) : 0; +} +#endif diff --git a/readline/readline/keymaps.c b/readline/readline/keymaps.c new file mode 100644 index 0000000000..4ade30bcd0 --- /dev/null +++ b/readline/readline/keymaps.c @@ -0,0 +1,174 @@ +/* keymaps.c -- Functions and keymaps for the GNU Readline library. */ + +/* Copyright (C) 1988,1989-2009,2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include /* for FILE * definition for readline.h */ + +#include "readline.h" +#include "rlconf.h" + +#include "emacs_keymap.c" + +#if defined (VI_MODE) +#include "vi_keymap.c" +#endif + +#include "xmalloc.h" + +/* **************************************************************** */ +/* */ +/* Functions for manipulating Keymaps. */ +/* */ +/* **************************************************************** */ + + +/* Return a new, empty keymap. + Free it with free() when you are done. */ +Keymap +rl_make_bare_keymap (void) +{ + register int i; + Keymap keymap; + + keymap = (Keymap)xmalloc (KEYMAP_SIZE * sizeof (KEYMAP_ENTRY)); + for (i = 0; i < KEYMAP_SIZE; i++) + { + keymap[i].type = ISFUNC; + keymap[i].function = (rl_command_func_t *)NULL; + } + +#if 0 + for (i = 'A'; i < ('Z' + 1); i++) + { + keymap[i].type = ISFUNC; + keymap[i].function = rl_do_lowercase_version; + } +#endif + + return (keymap); +} + +/* A convenience function that returns 1 if there are no keys bound to + functions in KEYMAP */ +int +rl_empty_keymap (Keymap keymap) +{ + int i; + + for (i = 0; i < ANYOTHERKEY; i++) + { + if (keymap[i].type != ISFUNC || keymap[i].function) + return 0; + } + return 1; +} + +/* Return a new keymap which is a copy of MAP. Just copies pointers, does + not copy text of macros or descend into child keymaps. */ +Keymap +rl_copy_keymap (Keymap map) +{ + register int i; + Keymap temp; + + temp = rl_make_bare_keymap (); + for (i = 0; i < KEYMAP_SIZE; i++) + { + temp[i].type = map[i].type; + temp[i].function = map[i].function; + } + return (temp); +} + +/* Return a new keymap with the printing characters bound to rl_insert, + the uppercase Meta characters bound to run their lowercase equivalents, + and the Meta digits bound to produce numeric arguments. */ +Keymap +rl_make_keymap (void) +{ + register int i; + Keymap newmap; + + newmap = rl_make_bare_keymap (); + + /* All ASCII printing characters are self-inserting. */ + for (i = ' '; i < 127; i++) + newmap[i].function = rl_insert; + + newmap[TAB].function = rl_insert; + newmap[RUBOUT].function = rl_rubout; /* RUBOUT == 127 */ + newmap[CTRL('H')].function = rl_rubout; + +#if KEYMAP_SIZE > 128 + /* Printing characters in ISO Latin-1 and some 8-bit character sets. */ + for (i = 128; i < 256; i++) + newmap[i].function = rl_insert; +#endif /* KEYMAP_SIZE > 128 */ + + return (newmap); +} + +/* Free the storage associated with MAP. */ +void +rl_discard_keymap (Keymap map) +{ + int i; + + if (map == 0) + return; + + for (i = 0; i < KEYMAP_SIZE; i++) + { + switch (map[i].type) + { + case ISFUNC: + break; + + case ISKMAP: + rl_discard_keymap ((Keymap)map[i].function); + xfree ((char *)map[i].function); + break; + + case ISMACR: + xfree ((char *)map[i].function); + break; + } + } +} + +/* Convenience function that discards, then frees, MAP. */ +void +rl_free_keymap (Keymap map) +{ + rl_discard_keymap (map); + xfree ((char *)map); +} diff --git a/readline/readline/keymaps.h b/readline/readline/keymaps.h new file mode 100644 index 0000000000..1fa853d8c1 --- /dev/null +++ b/readline/readline/keymaps.h @@ -0,0 +1,100 @@ +/* keymaps.h -- Manipulation of readline keymaps. */ + +/* Copyright (C) 1987, 1989, 1992 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#ifndef _KEYMAPS_H_ +#define _KEYMAPS_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined (READLINE_LIBRARY) +# include "rlstdc.h" +# include "chardefs.h" +# include "rltypedefs.h" +#else +# include +# include +# include +#endif + +/* A keymap contains one entry for each key in the ASCII set. + Each entry consists of a type and a pointer. + FUNCTION is the address of a function to run, or the + address of a keymap to indirect through. + TYPE says which kind of thing FUNCTION is. */ +typedef struct _keymap_entry { + char type; + rl_command_func_t *function; +} KEYMAP_ENTRY; + +/* This must be large enough to hold bindings for all of the characters + in a desired character set (e.g, 128 for ASCII, 256 for ISO Latin-x, + and so on) plus one for subsequence matching. */ +#define KEYMAP_SIZE 257 +#define ANYOTHERKEY KEYMAP_SIZE-1 + +typedef KEYMAP_ENTRY KEYMAP_ENTRY_ARRAY[KEYMAP_SIZE]; +typedef KEYMAP_ENTRY *Keymap; + +/* The values that TYPE can have in a keymap entry. */ +#define ISFUNC 0 +#define ISKMAP 1 +#define ISMACR 2 + +extern KEYMAP_ENTRY_ARRAY emacs_standard_keymap, emacs_meta_keymap, emacs_ctlx_keymap; +extern KEYMAP_ENTRY_ARRAY vi_insertion_keymap, vi_movement_keymap; + +/* Return a new, empty keymap. + Free it with free() when you are done. */ +extern Keymap rl_make_bare_keymap PARAMS((void)); + +/* Return a new keymap which is a copy of MAP. */ +extern Keymap rl_copy_keymap PARAMS((Keymap)); + +/* Return a new keymap with the printing characters bound to rl_insert, + the lowercase Meta characters bound to run their equivalents, and + the Meta digits bound to produce numeric arguments. */ +extern Keymap rl_make_keymap PARAMS((void)); + +/* Free the storage associated with a keymap. */ +extern void rl_discard_keymap PARAMS((Keymap)); + +/* These functions actually appear in bind.c */ + +/* Return the keymap corresponding to a given name. Names look like + `emacs' or `emacs-meta' or `vi-insert'. */ +extern Keymap rl_get_keymap_by_name PARAMS((const char *)); + +/* Return the current keymap. */ +extern Keymap rl_get_keymap PARAMS((void)); + +/* Set the current keymap to MAP. */ +extern void rl_set_keymap PARAMS((Keymap)); + +/* Set the name of MAP to NAME */ +extern int rl_set_keymap_name PARAMS((const char *, Keymap)); + +#ifdef __cplusplus +} +#endif + +#endif /* _KEYMAPS_H_ */ diff --git a/readline/readline/kill.c b/readline/readline/kill.c new file mode 100644 index 0000000000..cf8ca93243 --- /dev/null +++ b/readline/readline/kill.c @@ -0,0 +1,766 @@ +/* kill.c -- kill ring management. */ + +/* Copyright (C) 1994-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +/* **************************************************************** */ +/* */ +/* Killing Mechanism */ +/* */ +/* **************************************************************** */ + +/* What we assume for a max number of kills. */ +#define DEFAULT_MAX_KILLS 10 + +/* The real variable to look at to find out when to flush kills. */ +static int rl_max_kills = DEFAULT_MAX_KILLS; + +/* Where to store killed text. */ +static char **rl_kill_ring = (char **)NULL; + +/* Where we are in the kill ring. */ +static int rl_kill_index; + +/* How many slots we have in the kill ring. */ +static int rl_kill_ring_length; + +static int _rl_copy_to_kill_ring PARAMS((char *, int)); +static int region_kill_internal PARAMS((int)); +static int _rl_copy_word_as_kill PARAMS((int, int)); +static int rl_yank_nth_arg_internal PARAMS((int, int, int)); + +/* How to say that you only want to save a certain amount + of kill material. */ +int +rl_set_retained_kills (int num) +{ + return 0; +} + +/* Add TEXT to the kill ring, allocating a new kill ring slot as necessary. + This uses TEXT directly, so the caller must not free it. If APPEND is + non-zero, and the last command was a kill, the text is appended to the + current kill ring slot, otherwise prepended. */ +static int +_rl_copy_to_kill_ring (char *text, int append) +{ + char *old, *new; + int slot; + + /* First, find the slot to work with. */ + if (_rl_last_command_was_kill == 0 || rl_kill_ring == 0) + { + /* Get a new slot. */ + if (rl_kill_ring == 0) + { + /* If we don't have any defined, then make one. */ + rl_kill_ring = (char **) + xmalloc (((rl_kill_ring_length = 1) + 1) * sizeof (char *)); + rl_kill_ring[slot = 0] = (char *)NULL; + } + else + { + /* We have to add a new slot on the end, unless we have + exceeded the max limit for remembering kills. */ + slot = rl_kill_ring_length; + if (slot == rl_max_kills) + { + register int i; + xfree (rl_kill_ring[0]); + for (i = 0; i < slot; i++) + rl_kill_ring[i] = rl_kill_ring[i + 1]; + } + else + { + slot = rl_kill_ring_length += 1; + rl_kill_ring = (char **)xrealloc (rl_kill_ring, (slot + 1) * sizeof (char *)); + } + rl_kill_ring[--slot] = (char *)NULL; + } + } + else + slot = rl_kill_ring_length - 1; + + /* If the last command was a kill, prepend or append. */ + if (_rl_last_command_was_kill && rl_kill_ring[slot] && rl_editing_mode != vi_mode) + { + old = rl_kill_ring[slot]; + new = (char *)xmalloc (1 + strlen (old) + strlen (text)); + + if (append) + { + strcpy (new, old); + strcat (new, text); + } + else + { + strcpy (new, text); + strcat (new, old); + } + xfree (old); + xfree (text); + rl_kill_ring[slot] = new; + } + else + rl_kill_ring[slot] = text; + + rl_kill_index = slot; + return 0; +} + +/* The way to kill something. This appends or prepends to the last + kill, if the last command was a kill command. if FROM is less + than TO, then the text is appended, otherwise prepended. If the + last command was not a kill command, then a new slot is made for + this kill. */ +int +rl_kill_text (int from, int to) +{ + char *text; + + /* Is there anything to kill? */ + if (from == to) + { + _rl_last_command_was_kill++; + return 0; + } + + text = rl_copy_text (from, to); + + /* Delete the copied text from the line. */ + rl_delete_text (from, to); + + _rl_copy_to_kill_ring (text, from < to); + + _rl_last_command_was_kill++; + return 0; +} + +/* Now REMEMBER! In order to do prepending or appending correctly, kill + commands always make rl_point's original position be the FROM argument, + and rl_point's extent be the TO argument. */ + +/* **************************************************************** */ +/* */ +/* Killing Commands */ +/* */ +/* **************************************************************** */ + +/* Delete the word at point, saving the text in the kill ring. */ +int +rl_kill_word (int count, int key) +{ + int orig_point; + + if (count < 0) + return (rl_backward_kill_word (-count, key)); + else + { + orig_point = rl_point; + rl_forward_word (count, key); + + if (rl_point != orig_point) + rl_kill_text (orig_point, rl_point); + + rl_point = orig_point; + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + return 0; +} + +/* Rubout the word before point, placing it on the kill ring. */ +int +rl_backward_kill_word (int count, int key) +{ + int orig_point; + + if (count < 0) + return (rl_kill_word (-count, key)); + else + { + orig_point = rl_point; + rl_backward_word (count, key); + + if (rl_point != orig_point) + rl_kill_text (orig_point, rl_point); + + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + return 0; +} + +/* Kill from here to the end of the line. If DIRECTION is negative, kill + back to the line start instead. */ +int +rl_kill_line (int direction, int key) +{ + int orig_point; + + if (direction < 0) + return (rl_backward_kill_line (1, key)); + else + { + orig_point = rl_point; + rl_end_of_line (1, key); + if (orig_point != rl_point) + rl_kill_text (orig_point, rl_point); + rl_point = orig_point; + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + return 0; +} + +/* Kill backwards to the start of the line. If DIRECTION is negative, kill + forwards to the line end instead. */ +int +rl_backward_kill_line (int direction, int key) +{ + int orig_point; + + if (direction < 0) + return (rl_kill_line (1, key)); + else + { + if (rl_point == 0) + rl_ding (); + else + { + orig_point = rl_point; + rl_beg_of_line (1, key); + if (rl_point != orig_point) + rl_kill_text (orig_point, rl_point); + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + } + return 0; +} + +/* Kill the whole line, no matter where point is. */ +int +rl_kill_full_line (int count, int key) +{ + rl_begin_undo_group (); + rl_point = 0; + rl_kill_text (rl_point, rl_end); + rl_mark = 0; + rl_end_undo_group (); + return 0; +} + +/* The next two functions mimic unix line editing behaviour, except they + save the deleted text on the kill ring. This is safer than not saving + it, and since we have a ring, nobody should get screwed. */ + +/* This does what C-w does in Unix. We can't prevent people from + using behaviour that they expect. */ +int +rl_unix_word_rubout (int count, int key) +{ + int orig_point; + + if (rl_point == 0) + rl_ding (); + else + { + orig_point = rl_point; + if (count <= 0) + count = 1; + + while (count--) + { + while (rl_point && whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + while (rl_point && (whitespace (rl_line_buffer[rl_point - 1]) == 0)) + rl_point--; /* XXX - multibyte? */ + } + + rl_kill_text (orig_point, rl_point); + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + + return 0; +} + +/* This deletes one filename component in a Unix pathname. That is, it + deletes backward to directory separator (`/') or whitespace. */ +int +rl_unix_filename_rubout (int count, int key) +{ + int orig_point, c; + + if (rl_point == 0) + rl_ding (); + else + { + orig_point = rl_point; + if (count <= 0) + count = 1; + + while (count--) + { + c = rl_line_buffer[rl_point - 1]; + while (rl_point && (whitespace (c) || c == '/')) + { + rl_point--; + c = rl_line_buffer[rl_point - 1]; + } + + while (rl_point && (whitespace (c) == 0) && c != '/') + { + rl_point--; /* XXX - multibyte? */ + c = rl_line_buffer[rl_point - 1]; + } + } + + rl_kill_text (orig_point, rl_point); + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + + return 0; +} + +/* Here is C-u doing what Unix does. You don't *have* to use these + key-bindings. We have a choice of killing the entire line, or + killing from where we are to the start of the line. We choose the + latter, because if you are a Unix weenie, then you haven't backspaced + into the line at all, and if you aren't, then you know what you are + doing. */ +int +rl_unix_line_discard (int count, int key) +{ + if (rl_point == 0) + rl_ding (); + else + { + rl_kill_text (rl_point, 0); + rl_point = 0; + if (rl_editing_mode == emacs_mode) + rl_mark = rl_point; + } + return 0; +} + +/* Copy the text in the `region' to the kill ring. If DELETE is non-zero, + delete the text from the line as well. */ +static int +region_kill_internal (int delete) +{ + char *text; + + if (rl_mark != rl_point) + { + text = rl_copy_text (rl_point, rl_mark); + if (delete) + rl_delete_text (rl_point, rl_mark); + _rl_copy_to_kill_ring (text, rl_point < rl_mark); + } + + _rl_last_command_was_kill++; + return 0; +} + +/* Copy the text in the region to the kill ring. */ +int +rl_copy_region_to_kill (int count, int key) +{ + return (region_kill_internal (0)); +} + +/* Kill the text between the point and mark. */ +int +rl_kill_region (int count, int key) +{ + int r, npoint; + + npoint = (rl_point < rl_mark) ? rl_point : rl_mark; + r = region_kill_internal (1); + _rl_fix_point (1); + rl_point = npoint; + return r; +} + +/* Copy COUNT words to the kill ring. DIR says which direction we look + to find the words. */ +static int +_rl_copy_word_as_kill (int count, int dir) +{ + int om, op, r; + + om = rl_mark; + op = rl_point; + + if (dir > 0) + rl_forward_word (count, 0); + else + rl_backward_word (count, 0); + + rl_mark = rl_point; + + if (dir > 0) + rl_backward_word (count, 0); + else + rl_forward_word (count, 0); + + r = region_kill_internal (0); + + rl_mark = om; + rl_point = op; + + return r; +} + +int +rl_copy_forward_word (int count, int key) +{ + if (count < 0) + return (rl_copy_backward_word (-count, key)); + + return (_rl_copy_word_as_kill (count, 1)); +} + +int +rl_copy_backward_word (int count, int key) +{ + if (count < 0) + return (rl_copy_forward_word (-count, key)); + + return (_rl_copy_word_as_kill (count, -1)); +} + +/* Yank back the last killed text. This ignores arguments. */ +int +rl_yank (int count, int key) +{ + if (rl_kill_ring == 0) + { + _rl_abort_internal (); + return 1; + } + + _rl_set_mark_at_pos (rl_point); + rl_insert_text (rl_kill_ring[rl_kill_index]); + return 0; +} + +/* If the last command was yank, or yank_pop, and the text just + before point is identical to the current kill item, then + delete that text from the line, rotate the index down, and + yank back some other text. */ +int +rl_yank_pop (int count, int key) +{ + int l, n; + + if (((rl_last_func != rl_yank_pop) && (rl_last_func != rl_yank)) || + !rl_kill_ring) + { + _rl_abort_internal (); + return 1; + } + + l = strlen (rl_kill_ring[rl_kill_index]); + n = rl_point - l; + if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l)) + { + rl_delete_text (n, rl_point); + rl_point = n; + rl_kill_index--; + if (rl_kill_index < 0) + rl_kill_index = rl_kill_ring_length - 1; + rl_yank (1, 0); + return 0; + } + else + { + _rl_abort_internal (); + return 1; + } +} + +#if defined (VI_MODE) +int +rl_vi_yank_pop (int count, int key) +{ + int l, n; + + if (((rl_last_func != rl_vi_yank_pop) && (rl_last_func != rl_vi_put)) || + !rl_kill_ring) + { + _rl_abort_internal (); + return 1; + } + + l = strlen (rl_kill_ring[rl_kill_index]); + n = rl_point - l; + if (n >= 0 && STREQN (rl_line_buffer + n, rl_kill_ring[rl_kill_index], l)) + { + rl_delete_text (n, rl_point); + rl_point = n; + rl_kill_index--; + if (rl_kill_index < 0) + rl_kill_index = rl_kill_ring_length - 1; + rl_vi_put (1, 'p'); + return 0; + } + else + { + _rl_abort_internal (); + return 1; + } +} +#endif /* VI_MODE */ + +/* Yank the COUNTh argument from the previous history line, skipping + HISTORY_SKIP lines before looking for the `previous line'. */ +static int +rl_yank_nth_arg_internal (int count, int key, int history_skip) +{ + register HIST_ENTRY *entry; + char *arg; + int i, pos; + + pos = where_history (); + + if (history_skip) + { + for (i = 0; i < history_skip; i++) + entry = previous_history (); + } + + entry = previous_history (); + + history_set_pos (pos); + + if (entry == 0) + { + rl_ding (); + return 1; + } + + arg = history_arg_extract (count, count, entry->line); + if (!arg || !*arg) + { + rl_ding (); + FREE (arg); + return 1; + } + + rl_begin_undo_group (); + + _rl_set_mark_at_pos (rl_point); + +#if defined (VI_MODE) + /* Vi mode always inserts a space before yanking the argument, and it + inserts it right *after* rl_point. */ + if (rl_editing_mode == vi_mode) + { + rl_vi_append_mode (1, key); + rl_insert_text (" "); + } +#endif /* VI_MODE */ + + rl_insert_text (arg); + xfree (arg); + + rl_end_undo_group (); + return 0; +} + +/* Yank the COUNTth argument from the previous history line. */ +int +rl_yank_nth_arg (int count, int key) +{ + return (rl_yank_nth_arg_internal (count, key, 0)); +} + +/* Yank the last argument from the previous history line. This `knows' + how rl_yank_nth_arg treats a count of `$'. With an argument, this + behaves the same as rl_yank_nth_arg. */ +int +rl_yank_last_arg (int count, int key) +{ + static int history_skip = 0; + static int explicit_arg_p = 0; + static int count_passed = 1; + static int direction = 1; + static int undo_needed = 0; + int retval; + + if (rl_last_func != rl_yank_last_arg) + { + history_skip = 0; + explicit_arg_p = rl_explicit_arg; + count_passed = count; + direction = 1; + } + else + { + if (undo_needed) + rl_do_undo (); + if (count < 0) /* XXX - was < 1 */ + direction = -direction; + history_skip += direction; + if (history_skip < 0) + history_skip = 0; + } + + if (explicit_arg_p) + retval = rl_yank_nth_arg_internal (count_passed, key, history_skip); + else + retval = rl_yank_nth_arg_internal ('$', key, history_skip); + + undo_needed = retval == 0; + return retval; +} + +/* Having read the special escape sequence denoting the beginning of a + `bracketed paste' sequence, read the rest of the pasted input until the + closing sequence and insert the pasted text as a single unit without + interpretation. */ +char * +_rl_bracketed_text (size_t *lenp) +{ + int c; + size_t len, cap; + char *buf; + + len = 0; + buf = xmalloc (cap = 64); + buf[0] = '\0'; + + RL_SETSTATE (RL_STATE_MOREINPUT); + while ((c = rl_read_key ()) >= 0) + { + if (RL_ISSTATE (RL_STATE_MACRODEF)) + _rl_add_macro_char (c); + + if (c == '\r') /* XXX */ + c = '\n'; + + if (len == cap) + buf = xrealloc (buf, cap *= 2); + + buf[len++] = c; + if (len >= BRACK_PASTE_SLEN && c == BRACK_PASTE_LAST && + STREQN (buf + len - BRACK_PASTE_SLEN, BRACK_PASTE_SUFF, BRACK_PASTE_SLEN)) + { + len -= BRACK_PASTE_SLEN; + break; + } + } + RL_UNSETSTATE (RL_STATE_MOREINPUT); + + if (c >= 0) + { + if (len == cap) + buf = xrealloc (buf, cap + 1); + buf[len] = '\0'; + } + + if (lenp) + *lenp = len; + return (buf); +} + +int +rl_bracketed_paste_begin (int count, int key) +{ + int retval, c; + size_t len, cap; + char *buf; + + buf = _rl_bracketed_text (&len); + retval = rl_insert_text (buf) == len ? 0 : 1; + + xfree (buf); + return (retval); +} + +/* A special paste command for Windows users. */ +#if defined (_WIN32) +#include + +int +rl_paste_from_clipboard (int count, int key) +{ + char *data, *ptr; + int len; + + if (OpenClipboard (NULL) == 0) + return (0); + + data = (char *)GetClipboardData (CF_TEXT); + if (data) + { + ptr = strchr (data, '\r'); + if (ptr) + { + len = ptr - data; + ptr = (char *)xmalloc (len + 1); + ptr[len] = '\0'; + strncpy (ptr, data, len); + } + else + ptr = data; + _rl_set_mark_at_pos (rl_point); + rl_insert_text (ptr); + if (ptr != data) + xfree (ptr); + CloseClipboard (); + } + return (0); +} +#endif /* _WIN32 */ diff --git a/readline/readline/macro.c b/readline/readline/macro.c new file mode 100644 index 0000000000..92cc55c36d --- /dev/null +++ b/readline/readline/macro.c @@ -0,0 +1,332 @@ +/* macro.c -- keyboard macros for readline. */ + +/* Copyright (C) 1994-2009,2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +#define MAX_MACRO_LEVEL 16 + +/* **************************************************************** */ +/* */ +/* Hacking Keyboard Macros */ +/* */ +/* **************************************************************** */ + +/* The currently executing macro string. If this is non-zero, + then it is a malloc ()'ed string where input is coming from. */ +char *rl_executing_macro = (char *)NULL; + +/* The offset in the above string to the next character to be read. */ +static int executing_macro_index; + +/* The current macro string being built. Characters get stuffed + in here by add_macro_char (). */ +static char *current_macro = (char *)NULL; + +/* The size of the buffer allocated to current_macro. */ +static int current_macro_size; + +/* The index at which characters are being added to current_macro. */ +static int current_macro_index; + +/* A structure used to save nested macro strings. + It is a linked list of string/index for each saved macro. */ +struct saved_macro { + struct saved_macro *next; + char *string; + int sindex; +}; + +/* The list of saved macros. */ +static struct saved_macro *macro_list = (struct saved_macro *)NULL; + +static int macro_level = 0; + +/* Set up to read subsequent input from STRING. + STRING is free ()'ed when we are done with it. */ +void +_rl_with_macro_input (char *string) +{ + if (macro_level > MAX_MACRO_LEVEL) + { + _rl_errmsg ("maximum macro execution nesting level exceeded"); + _rl_abort_internal (); + return; + } + +#if 0 + if (rl_executing_macro) /* XXX - later */ +#endif + _rl_push_executing_macro (); + rl_executing_macro = string; + executing_macro_index = 0; + RL_SETSTATE(RL_STATE_MACROINPUT); +} + +/* Return the next character available from a macro, or 0 if + there are no macro characters. */ +int +_rl_next_macro_key (void) +{ + int c; + + if (rl_executing_macro == 0) + return (0); + + if (rl_executing_macro[executing_macro_index] == 0) + { + _rl_pop_executing_macro (); + return (_rl_next_macro_key ()); + } + +#if defined (READLINE_CALLBACKS) + c = rl_executing_macro[executing_macro_index++]; + if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_READCMD|RL_STATE_MOREINPUT) && rl_executing_macro[executing_macro_index] == 0) + _rl_pop_executing_macro (); + return c; +#else + /* XXX - consider doing the same as the callback code, just not testing + whether we're running in callback mode */ + return (rl_executing_macro[executing_macro_index++]); +#endif +} + +int +_rl_peek_macro_key (void) +{ + if (rl_executing_macro == 0) + return (0); + if (rl_executing_macro[executing_macro_index] == 0 && (macro_list == 0 || macro_list->string == 0)) + return (0); + if (rl_executing_macro[executing_macro_index] == 0 && macro_list && macro_list->string) + return (macro_list->string[0]); + return (rl_executing_macro[executing_macro_index]); +} + +int +_rl_prev_macro_key (void) +{ + if (rl_executing_macro == 0) + return (0); + + if (executing_macro_index == 0) + return (0); + + executing_macro_index--; + return (rl_executing_macro[executing_macro_index]); +} + +/* Save the currently executing macro on a stack of saved macros. */ +void +_rl_push_executing_macro (void) +{ + struct saved_macro *saver; + + saver = (struct saved_macro *)xmalloc (sizeof (struct saved_macro)); + saver->next = macro_list; + saver->sindex = executing_macro_index; + saver->string = rl_executing_macro; + + macro_list = saver; + + macro_level++; +} + +/* Discard the current macro, replacing it with the one + on the top of the stack of saved macros. */ +void +_rl_pop_executing_macro (void) +{ + struct saved_macro *macro; + + FREE (rl_executing_macro); + rl_executing_macro = (char *)NULL; + executing_macro_index = 0; + + if (macro_list) + { + macro = macro_list; + rl_executing_macro = macro_list->string; + executing_macro_index = macro_list->sindex; + macro_list = macro_list->next; + xfree (macro); + } + + macro_level--; + + if (rl_executing_macro == 0) + RL_UNSETSTATE(RL_STATE_MACROINPUT); +} + +/* Add a character to the macro being built. */ +void +_rl_add_macro_char (int c) +{ + if (current_macro_index + 1 >= current_macro_size) + { + if (current_macro == 0) + current_macro = (char *)xmalloc (current_macro_size = 25); + else + current_macro = (char *)xrealloc (current_macro, current_macro_size += 25); + } + + current_macro[current_macro_index++] = c; + current_macro[current_macro_index] = '\0'; +} + +void +_rl_kill_kbd_macro (void) +{ + if (current_macro) + { + xfree (current_macro); + current_macro = (char *) NULL; + } + current_macro_size = current_macro_index = 0; + + FREE (rl_executing_macro); + rl_executing_macro = (char *) NULL; + executing_macro_index = 0; + + RL_UNSETSTATE(RL_STATE_MACRODEF); +} + +/* Begin defining a keyboard macro. + Keystrokes are recorded as they are executed. + End the definition with rl_end_kbd_macro (). + If a numeric argument was explicitly typed, then append this + definition to the end of the existing macro, and start by + re-executing the existing macro. */ +int +rl_start_kbd_macro (int ignore1, int ignore2) +{ + if (RL_ISSTATE (RL_STATE_MACRODEF)) + { + _rl_abort_internal (); + return 1; + } + + if (rl_explicit_arg) + { + if (current_macro) + _rl_with_macro_input (savestring (current_macro)); + } + else + current_macro_index = 0; + + RL_SETSTATE(RL_STATE_MACRODEF); + return 0; +} + +/* Stop defining a keyboard macro. + A numeric argument says to execute the macro right now, + that many times, counting the definition as the first time. */ +int +rl_end_kbd_macro (int count, int ignore) +{ + if (RL_ISSTATE (RL_STATE_MACRODEF) == 0) + { + _rl_abort_internal (); + return 1; + } + + current_macro_index -= rl_key_sequence_length; + current_macro[current_macro_index] = '\0'; + + RL_UNSETSTATE(RL_STATE_MACRODEF); + + return (rl_call_last_kbd_macro (--count, 0)); +} + +/* Execute the most recently defined keyboard macro. + COUNT says how many times to execute it. */ +int +rl_call_last_kbd_macro (int count, int ignore) +{ + if (current_macro == 0) + _rl_abort_internal (); + + if (RL_ISSTATE (RL_STATE_MACRODEF)) + { + rl_ding (); /* no recursive macros */ + current_macro[--current_macro_index] = '\0'; /* erase this char */ + return 0; + } + + while (count--) + _rl_with_macro_input (savestring (current_macro)); + return 0; +} + +int +rl_print_last_kbd_macro (int count, int ignore) +{ + char *m; + + if (current_macro == 0) + { + rl_ding (); + return 0; + } + m = _rl_untranslate_macro_value (current_macro, 1); + rl_crlf (); + printf ("%s", m); + fflush (stdout); + rl_crlf (); + FREE (m); + rl_forced_update_display (); + rl_display_fixed = 1; + + return 0; +} + +void +rl_push_macro_input (char *macro) +{ + _rl_with_macro_input (macro); +} diff --git a/readline/readline/mbutil.c b/readline/readline/mbutil.c new file mode 100644 index 0000000000..17716357fe --- /dev/null +++ b/readline/readline/mbutil.c @@ -0,0 +1,440 @@ +/* mbutil.c -- readline multibyte character utility functions */ + +/* Copyright (C) 2001-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include "posixjmp.h" + +#if defined (HAVE_UNISTD_H) +# include /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +#if defined (TIOCSTAT_IN_SYS_IOCTL) +# include +#endif /* TIOCSTAT_IN_SYS_IOCTL */ + +/* Some standard library routines. */ +#include "readline.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +/* Declared here so it can be shared between the readline and history + libraries. */ +#if defined (HANDLE_MULTIBYTE) +int rl_byte_oriented = 0; +#else +int rl_byte_oriented = 1; +#endif + +/* Ditto */ +int _rl_utf8locale = 0; + +/* **************************************************************** */ +/* */ +/* Multibyte Character Utility Functions */ +/* */ +/* **************************************************************** */ + +#if defined(HANDLE_MULTIBYTE) + +/* **************************************************************** */ +/* */ +/* UTF-8 specific Character Utility Functions */ +/* */ +/* **************************************************************** */ + +/* Return the length in bytes of the possibly-multibyte character beginning + at S. Encoding is UTF-8. */ +static int +_rl_utf8_mblen (const char *s, size_t n) +{ + unsigned char c, c1; + + if (s == 0) + return (0); /* no shift states */ + if (n <= 0) + return (-1); + + c = (unsigned char)*s; + if (c < 0x80) + return (c != 0); + if (c >= 0xc2) + { + c1 = (unsigned char)s[1]; + if (c < 0xe0) + { + if (n >= 2 && (s[1] ^ 0x80) < 0x40) + return 2; + } + else if (c < 0xf0) + { + if (n >= 3 + && (s[1] ^ 0x80) < 0x40 && (s[2] ^ 0x80) < 0x40 + && (c >= 0xe1 || c1 >= 0xa0) + && (c != 0xed || c1 < 0xa0)) + return 3; + } + else if (c < 0xf8) + { + if (n >= 4 + && (s[1] ^ 0x80) < 0x40 && (s[2] ^ 0x80) < 0x40 + && (s[3] ^ 0x80) < 0x40 + && (c >= 0xf1 || c1 >= 0x90) + && (c < 0xf4 || (c == 0xf4 && c1 < 0x90))) + return 4; + } + } + /* invalid or incomplete multibyte character */ + return -1; +} + +static int +_rl_find_next_mbchar_internal (char *string, int seed, int count, int find_non_zero) +{ + size_t tmp, len; + mbstate_t ps; + int point; + wchar_t wc; + + tmp = 0; + + memset(&ps, 0, sizeof (mbstate_t)); + if (seed < 0) + seed = 0; + if (count <= 0) + return seed; + + point = seed + _rl_adjust_point (string, seed, &ps); + /* if _rl_adjust_point returns -1, the character or string is invalid. + treat as a byte. */ + if (point == seed - 1) /* invalid */ + return seed + 1; + + /* if this is true, means that seed was not pointing to a byte indicating + the beginning of a multibyte character. Correct the point and consume + one char. */ + if (seed < point) + count--; + + while (count > 0) + { + len = strlen (string + point); + if (len == 0) + break; + if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point])) + { + tmp = 1; + wc = (wchar_t) string[point]; + memset(&ps, 0, sizeof(mbstate_t)); + } + else + tmp = mbrtowc (&wc, string+point, len, &ps); + if (MB_INVALIDCH ((size_t)tmp)) + { + /* invalid bytes. assume a byte represents a character */ + point++; + count--; + /* reset states. */ + memset(&ps, 0, sizeof(mbstate_t)); + } + else if (MB_NULLWCH (tmp)) + break; /* found wide '\0' */ + else + { + /* valid bytes */ + point += tmp; + if (find_non_zero) + { + if (WCWIDTH (wc) == 0) + continue; + else + count--; + } + else + count--; + } + } + + if (find_non_zero) + { + tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps); + while (MB_NULLWCH (tmp) == 0 && MB_INVALIDCH (tmp) == 0 && WCWIDTH (wc) == 0) + { + point += tmp; + tmp = mbrtowc (&wc, string + point, strlen (string + point), &ps); + } + } + + return point; +} + +/*static*/ int +_rl_find_prev_mbchar_internal (char *string, int seed, int find_non_zero) +{ + mbstate_t ps; + int prev, non_zero_prev, point, length; + size_t tmp; + wchar_t wc; + + memset(&ps, 0, sizeof(mbstate_t)); + length = strlen(string); + + if (seed < 0) + return 0; + else if (length < seed) + return length; + + prev = non_zero_prev = point = 0; + while (point < seed) + { + if (_rl_utf8locale && UTF8_SINGLEBYTE(string[point])) + { + tmp = 1; + wc = (wchar_t) string[point]; + memset(&ps, 0, sizeof(mbstate_t)); + } + else + tmp = mbrtowc (&wc, string + point, length - point, &ps); + if (MB_INVALIDCH ((size_t)tmp)) + { + /* in this case, bytes are invalid or too short to compose + multibyte char, so assume that the first byte represents + a single character anyway. */ + tmp = 1; + /* clear the state of the byte sequence, because + in this case effect of mbstate is undefined */ + memset(&ps, 0, sizeof (mbstate_t)); + + /* Since we're assuming that this byte represents a single + non-zero-width character, don't forget about it. */ + prev = point; + } + else if (MB_NULLWCH (tmp)) + break; /* Found '\0' char. Can this happen? */ + else + { + if (find_non_zero) + { + if (WCWIDTH (wc) != 0) + prev = point; + } + else + prev = point; + } + + point += tmp; + } + + return prev; +} + +/* return the number of bytes parsed from the multibyte sequence starting + at src, if a non-L'\0' wide character was recognized. It returns 0, + if a L'\0' wide character was recognized. It returns (size_t)(-1), + if an invalid multibyte sequence was encountered. It returns (size_t)(-2) + if it couldn't parse a complete multibyte character. */ +int +_rl_get_char_len (char *src, mbstate_t *ps) +{ + size_t tmp, l; + int mb_cur_max; + + /* Look at no more than MB_CUR_MAX characters */ + l = (size_t)strlen (src); + if (_rl_utf8locale && l > 0 && UTF8_SINGLEBYTE(*src)) + tmp = (*src != 0) ? 1 : 0; + else + { + mb_cur_max = MB_CUR_MAX; + tmp = mbrlen((const char *)src, (l < mb_cur_max) ? l : mb_cur_max, ps); + } + if (tmp == (size_t)(-2)) + { + /* too short to compose multibyte char */ + if (ps) + memset (ps, 0, sizeof(mbstate_t)); + return -2; + } + else if (tmp == (size_t)(-1)) + { + /* invalid to compose multibyte char */ + /* initialize the conversion state */ + if (ps) + memset (ps, 0, sizeof(mbstate_t)); + return -1; + } + else if (tmp == (size_t)0) + return 0; + else + return (int)tmp; +} + +/* compare the specified two characters. If the characters matched, + return 1. Otherwise return 0. */ +int +_rl_compare_chars (char *buf1, int pos1, mbstate_t *ps1, char *buf2, int pos2, mbstate_t *ps2) +{ + int i, w1, w2; + + if ((w1 = _rl_get_char_len (&buf1[pos1], ps1)) <= 0 || + (w2 = _rl_get_char_len (&buf2[pos2], ps2)) <= 0 || + (w1 != w2) || + (buf1[pos1] != buf2[pos2])) + return 0; + + for (i = 1; i < w1; i++) + if (buf1[pos1+i] != buf2[pos2+i]) + return 0; + + return 1; +} + +/* adjust pointed byte and find mbstate of the point of string. + adjusted point will be point <= adjusted_point, and returns + differences of the byte(adjusted_point - point). + if point is invalid (point < 0 || more than string length), + it returns -1 */ +int +_rl_adjust_point (char *string, int point, mbstate_t *ps) +{ + size_t tmp; + int length, pos; + + tmp = 0; + pos = 0; + length = strlen(string); + if (point < 0) + return -1; + if (length < point) + return -1; + + while (pos < point) + { + if (_rl_utf8locale && UTF8_SINGLEBYTE(string[pos])) + tmp = 1; + else + tmp = mbrlen (string + pos, length - pos, ps); + if (MB_INVALIDCH ((size_t)tmp)) + { + /* in this case, bytes are invalid or too short to compose + multibyte char, so assume that the first byte represents + a single character anyway. */ + pos++; + /* clear the state of the byte sequence, because + in this case effect of mbstate is undefined */ + if (ps) + memset (ps, 0, sizeof (mbstate_t)); + } + else if (MB_NULLWCH (tmp)) + pos++; + else + pos += tmp; + } + + return (pos - point); +} + +int +_rl_is_mbchar_matched (char *string, int seed, int end, char *mbchar, int length) +{ + int i; + + if ((end - seed) < length) + return 0; + + for (i = 0; i < length; i++) + if (string[seed + i] != mbchar[i]) + return 0; + return 1; +} + +wchar_t +_rl_char_value (char *buf, int ind) +{ + size_t tmp; + wchar_t wc; + mbstate_t ps; + int l; + + if (MB_LEN_MAX == 1 || rl_byte_oriented) + return ((wchar_t) buf[ind]); + if (_rl_utf8locale && UTF8_SINGLEBYTE(buf[ind])) + return ((wchar_t) buf[ind]); + l = strlen (buf); + if (ind >= l - 1) + return ((wchar_t) buf[ind]); + if (l < ind) /* Sanity check */ + l = strlen (buf+ind); + memset (&ps, 0, sizeof (mbstate_t)); + tmp = mbrtowc (&wc, buf + ind, l - ind, &ps); + if (MB_INVALIDCH (tmp) || MB_NULLWCH (tmp)) + return ((wchar_t) buf[ind]); + return wc; +} +#endif /* HANDLE_MULTIBYTE */ + +/* Find next `count' characters started byte point of the specified seed. + If flags is MB_FIND_NONZERO, we look for non-zero-width multibyte + characters. */ +#undef _rl_find_next_mbchar +int +_rl_find_next_mbchar (char *string, int seed, int count, int flags) +{ +#if defined (HANDLE_MULTIBYTE) + return _rl_find_next_mbchar_internal (string, seed, count, flags); +#else + return (seed + count); +#endif +} + +/* Find previous character started byte point of the specified seed. + Returned point will be point <= seed. If flags is MB_FIND_NONZERO, + we look for non-zero-width multibyte characters. */ +#undef _rl_find_prev_mbchar +int +_rl_find_prev_mbchar (char *string, int seed, int flags) +{ +#if defined (HANDLE_MULTIBYTE) + return _rl_find_prev_mbchar_internal (string, seed, flags); +#else + return ((seed == 0) ? seed : seed - 1); +#endif +} diff --git a/readline/readline/misc.c b/readline/readline/misc.c new file mode 100644 index 0000000000..64b1457d29 --- /dev/null +++ b/readline/readline/misc.c @@ -0,0 +1,681 @@ +/* misc.c -- miscellaneous bindable readline functions. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include +#endif + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +static int rl_digit_loop PARAMS((void)); +static void _rl_history_set_point PARAMS((void)); + +/* Forward declarations used in this file */ +void _rl_free_history_entry PARAMS((HIST_ENTRY *)); + +/* If non-zero, rl_get_previous_history and rl_get_next_history attempt + to preserve the value of rl_point from line to line. */ +int _rl_history_preserve_point = 0; + +_rl_arg_cxt _rl_argcxt; + +/* Saved target point for when _rl_history_preserve_point is set. Special + value of -1 means that point is at the end of the line. */ +int _rl_history_saved_point = -1; + +/* **************************************************************** */ +/* */ +/* Numeric Arguments */ +/* */ +/* **************************************************************** */ + +int +_rl_arg_overflow (void) +{ + if (rl_numeric_arg > 1000000) + { + _rl_argcxt = 0; + rl_explicit_arg = rl_numeric_arg = 0; + rl_ding (); + rl_restore_prompt (); + rl_clear_message (); + RL_UNSETSTATE(RL_STATE_NUMERICARG); + return 1; + } + return 0; +} + +void +_rl_arg_init (void) +{ + rl_save_prompt (); + _rl_argcxt = 0; + RL_SETSTATE(RL_STATE_NUMERICARG); +} + +int +_rl_arg_getchar (void) +{ + int c; + + rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + return c; +} + +/* Process C as part of the current numeric argument. Return -1 if the + argument should be aborted, 0 if we should not read any more chars, and + 1 if we should continue to read chars. */ +int +_rl_arg_dispatch (_rl_arg_cxt cxt, int c) +{ + int key, r; + + key = c; + + /* If we see a key bound to `universal-argument' after seeing digits, + it ends the argument but is otherwise ignored. */ + if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument) + { + if ((cxt & NUM_SAWDIGITS) == 0) + { + rl_numeric_arg *= 4; + return 1; + } + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_argcxt |= NUM_READONE; + return 0; /* XXX */ + } + else + { + RL_SETSTATE(RL_STATE_MOREINPUT); + key = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + rl_restore_prompt (); + rl_clear_message (); + RL_UNSETSTATE(RL_STATE_NUMERICARG); + if (key < 0) + return -1; + return (_rl_dispatch (key, _rl_keymap)); + } + } + + c = UNMETA (c); + + if (_rl_digit_p (c)) + { + r = _rl_digit_value (c); + rl_numeric_arg = rl_explicit_arg ? (rl_numeric_arg * 10) + r : r; + rl_explicit_arg = 1; + _rl_argcxt |= NUM_SAWDIGITS; + } + else if (c == '-' && rl_explicit_arg == 0) + { + rl_numeric_arg = 1; + _rl_argcxt |= NUM_SAWMINUS; + rl_arg_sign = -1; + } + else + { + /* Make M-- command equivalent to M--1 command. */ + if ((_rl_argcxt & NUM_SAWMINUS) && rl_numeric_arg == 1 && rl_explicit_arg == 0) + rl_explicit_arg = 1; + rl_restore_prompt (); + rl_clear_message (); + RL_UNSETSTATE(RL_STATE_NUMERICARG); + + r = _rl_dispatch (key, _rl_keymap); + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + /* At worst, this will cause an extra redisplay. Otherwise, + we have to wait until the next character comes in. */ + if (rl_done == 0) + (*rl_redisplay_function) (); + r = 0; + } + return r; + } + + return 1; +} + +/* Handle C-u style numeric args, as well as M--, and M-digits. */ +static int +rl_digit_loop (void) +{ + int c, r; + + while (1) + { + if (_rl_arg_overflow ()) + return 1; + + c = _rl_arg_getchar (); + + if (c < 0) + { + _rl_abort_internal (); + return -1; + } + + r = _rl_arg_dispatch (_rl_argcxt, c); + if (r <= 0 || (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)) + break; + } + + return r; +} + +/* Create a default argument. */ +void +_rl_reset_argument (void) +{ + rl_numeric_arg = rl_arg_sign = 1; + rl_explicit_arg = 0; + _rl_argcxt = 0; +} + +/* Start a numeric argument with initial value KEY */ +int +rl_digit_argument (int ignore, int key) +{ + _rl_arg_init (); + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_arg_dispatch (_rl_argcxt, key); + rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); + return 0; + } + else + { + rl_execute_next (key); + return (rl_digit_loop ()); + } +} + +/* C-u, universal argument. Multiply the current argument by 4. + Read a key. If the key has nothing to do with arguments, then + dispatch on it. If the key is the abort character then abort. */ +int +rl_universal_argument (int count, int key) +{ + _rl_arg_init (); + rl_numeric_arg *= 4; + + return (RL_ISSTATE (RL_STATE_CALLBACK) ? 0 : rl_digit_loop ()); +} + +int +_rl_arg_callback (_rl_arg_cxt cxt) +{ + int c, r; + + c = _rl_arg_getchar (); + if (c < 0) + return (1); /* EOF */ + + if (_rl_argcxt & NUM_READONE) + { + _rl_argcxt &= ~NUM_READONE; + rl_restore_prompt (); + rl_clear_message (); + RL_UNSETSTATE(RL_STATE_NUMERICARG); + rl_execute_next (c); + return 0; + } + + r = _rl_arg_dispatch (cxt, c); + if (r > 0) + rl_message ("(arg: %d) ", rl_arg_sign * rl_numeric_arg); + return (r != 1); +} + +/* What to do when you abort reading an argument. */ +int +rl_discard_argument (void) +{ + rl_ding (); + rl_clear_message (); + _rl_reset_argument (); + + return 0; +} + +/* **************************************************************** */ +/* */ +/* History Utilities */ +/* */ +/* **************************************************************** */ + +/* We already have a history library, and that is what we use to control + the history features of readline. This is our local interface to + the history mechanism. */ + +/* While we are editing the history, this is the saved + version of the original line. */ +HIST_ENTRY *_rl_saved_line_for_history = (HIST_ENTRY *)NULL; + +/* Set the history pointer back to the last entry in the history. */ +void +_rl_start_using_history (void) +{ + using_history (); + if (_rl_saved_line_for_history) + _rl_free_history_entry (_rl_saved_line_for_history); + + _rl_saved_line_for_history = (HIST_ENTRY *)NULL; +} + +/* Free the contents (and containing structure) of a HIST_ENTRY. */ +void +_rl_free_history_entry (HIST_ENTRY *entry) +{ + if (entry == 0) + return; + + FREE (entry->line); + FREE (entry->timestamp); + + xfree (entry); +} + +/* Perhaps put back the current line if it has changed. */ +int +rl_maybe_replace_line (void) +{ + HIST_ENTRY *temp; + + temp = current_history (); + /* If the current line has changed, save the changes. */ + if (temp && ((UNDO_LIST *)(temp->data) != rl_undo_list)) + { + temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list); + xfree (temp->line); + FREE (temp->timestamp); + xfree (temp); + } + return 0; +} + +/* Restore the _rl_saved_line_for_history if there is one. */ +int +rl_maybe_unsave_line (void) +{ + if (_rl_saved_line_for_history) + { + /* Can't call with `1' because rl_undo_list might point to an undo + list from a history entry, as in rl_replace_from_history() below. */ + rl_replace_line (_rl_saved_line_for_history->line, 0); + rl_undo_list = (UNDO_LIST *)_rl_saved_line_for_history->data; + _rl_free_history_entry (_rl_saved_line_for_history); + _rl_saved_line_for_history = (HIST_ENTRY *)NULL; + rl_point = rl_end; /* rl_replace_line sets rl_end */ + } + else + rl_ding (); + return 0; +} + +/* Save the current line in _rl_saved_line_for_history. */ +int +rl_maybe_save_line (void) +{ + if (_rl_saved_line_for_history == 0) + { + _rl_saved_line_for_history = (HIST_ENTRY *)xmalloc (sizeof (HIST_ENTRY)); + _rl_saved_line_for_history->line = savestring (rl_line_buffer); + _rl_saved_line_for_history->timestamp = (char *)NULL; + _rl_saved_line_for_history->data = (char *)rl_undo_list; + } + + return 0; +} + +int +_rl_free_saved_history_line (void) +{ + if (_rl_saved_line_for_history) + { + _rl_free_history_entry (_rl_saved_line_for_history); + _rl_saved_line_for_history = (HIST_ENTRY *)NULL; + } + return 0; +} + +static void +_rl_history_set_point (void) +{ + rl_point = (_rl_history_preserve_point && _rl_history_saved_point != -1) + ? _rl_history_saved_point + : rl_end; + if (rl_point > rl_end) + rl_point = rl_end; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode && _rl_keymap != vi_insertion_keymap) + rl_point = 0; +#endif /* VI_MODE */ + + if (rl_editing_mode == emacs_mode) + rl_mark = (rl_point == rl_end ? 0 : rl_end); +} + +void +rl_replace_from_history (HIST_ENTRY *entry, int flags) +{ + /* Can't call with `1' because rl_undo_list might point to an undo list + from a history entry, just like we're setting up here. */ + rl_replace_line (entry->line, 0); + rl_undo_list = (UNDO_LIST *)entry->data; + rl_point = rl_end; + rl_mark = 0; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + { + rl_point = 0; + rl_mark = rl_end; + } +#endif +} + +/* Process and free undo lists attached to each history entry prior to the + current entry, inclusive, reverting each line to its saved state. This + is destructive, and state about the current line is lost. This is not + intended to be called while actively editing, and the current line is + not assumed to have been added to the history list. */ +void +_rl_revert_all_lines (void) +{ + int hpos; + HIST_ENTRY *entry; + UNDO_LIST *ul, *saved_undo_list; + char *lbuf; + + lbuf = savestring (rl_line_buffer); + saved_undo_list = rl_undo_list; + hpos = where_history (); + + entry = (hpos == history_length) ? previous_history () : current_history (); + while (entry) + { + if (ul = (UNDO_LIST *)entry->data) + { + if (ul == saved_undo_list) + saved_undo_list = 0; + /* Set up rl_line_buffer and other variables from history entry */ + rl_replace_from_history (entry, 0); /* entry->line is now current */ + entry->data = 0; /* entry->data is now current undo list */ + /* Undo all changes to this history entry */ + while (rl_undo_list) + rl_do_undo (); + /* And copy the reverted line back to the history entry, preserving + the timestamp. */ + FREE (entry->line); + entry->line = savestring (rl_line_buffer); + } + entry = previous_history (); + } + + /* Restore history state */ + rl_undo_list = saved_undo_list; /* may have been set to null */ + history_set_pos (hpos); + + /* reset the line buffer */ + rl_replace_line (lbuf, 0); + _rl_set_the_line (); + + /* and clean up */ + xfree (lbuf); +} + +/* Free the history list, including private readline data and take care + of pointer aliases to history data. Resets rl_undo_list if it points + to an UNDO_LIST * saved as some history entry's data member. This + should not be called while editing is active. */ +void +rl_clear_history (void) +{ + HIST_ENTRY **hlist, *hent; + register int i; + UNDO_LIST *ul, *saved_undo_list; + + saved_undo_list = rl_undo_list; + hlist = history_list (); /* direct pointer, not copy */ + + for (i = 0; i < history_length; i++) + { + hent = hlist[i]; + if (ul = (UNDO_LIST *)hent->data) + { + if (ul == saved_undo_list) + saved_undo_list = 0; + _rl_free_undo_list (ul); + hent->data = 0; + } + _rl_free_history_entry (hent); + } + + history_offset = history_length = 0; + rl_undo_list = saved_undo_list; /* should be NULL */ +} + +/* **************************************************************** */ +/* */ +/* History Commands */ +/* */ +/* **************************************************************** */ + +/* Meta-< goes to the start of the history. */ +int +rl_beginning_of_history (int count, int key) +{ + return (rl_get_previous_history (1 + where_history (), key)); +} + +/* Meta-> goes to the end of the history. (The current line). */ +int +rl_end_of_history (int count, int key) +{ + rl_maybe_replace_line (); + using_history (); + rl_maybe_unsave_line (); + return 0; +} + +/* Move down to the next history line. */ +int +rl_get_next_history (int count, int key) +{ + HIST_ENTRY *temp; + + if (count < 0) + return (rl_get_previous_history (-count, key)); + + if (count == 0) + return 0; + + rl_maybe_replace_line (); + + /* either not saved by rl_newline or at end of line, so set appropriately. */ + if (_rl_history_saved_point == -1 && (rl_point || rl_end)) + _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; + + temp = (HIST_ENTRY *)NULL; + while (count) + { + temp = next_history (); + if (!temp) + break; + --count; + } + + if (temp == 0) + rl_maybe_unsave_line (); + else + { + rl_replace_from_history (temp, 0); + _rl_history_set_point (); + } + return 0; +} + +/* Get the previous item out of our interactive history, making it the current + line. If there is no previous history, just ding. */ +int +rl_get_previous_history (int count, int key) +{ + HIST_ENTRY *old_temp, *temp; + + if (count < 0) + return (rl_get_next_history (-count, key)); + + if (count == 0 || history_list () == 0) + return 0; + + /* either not saved by rl_newline or at end of line, so set appropriately. */ + if (_rl_history_saved_point == -1 && (rl_point || rl_end)) + _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; + + /* If we don't have a line saved, then save this one. */ + rl_maybe_save_line (); + + /* If the current line has changed, save the changes. */ + rl_maybe_replace_line (); + + temp = old_temp = (HIST_ENTRY *)NULL; + while (count) + { + temp = previous_history (); + if (temp == 0) + break; + + old_temp = temp; + --count; + } + + /* If there was a large argument, and we moved back to the start of the + history, that is not an error. So use the last value found. */ + if (!temp && old_temp) + temp = old_temp; + + if (temp == 0) + { + rl_maybe_unsave_line (); + rl_ding (); + } + else + { + rl_replace_from_history (temp, 0); + _rl_history_set_point (); + } + + return 0; +} + +/* **************************************************************** */ +/* */ +/* Editing Modes */ +/* */ +/* **************************************************************** */ +/* How to toggle back and forth between editing modes. */ +int +rl_vi_editing_mode (int count, int key) +{ +#if defined (VI_MODE) + _rl_set_insert_mode (RL_IM_INSERT, 1); /* vi mode ignores insert mode */ + rl_editing_mode = vi_mode; + rl_vi_insert_mode (1, key); +#endif /* VI_MODE */ + + return 0; +} + +int +rl_emacs_editing_mode (int count, int key) +{ + rl_editing_mode = emacs_mode; + _rl_set_insert_mode (RL_IM_INSERT, 1); /* emacs mode default is insert mode */ + _rl_keymap = emacs_standard_keymap; + + if (_rl_show_mode_in_prompt) + _rl_reset_prompt (); + + return 0; +} + +/* Function for the rest of the library to use to set insert/overwrite mode. */ +void +_rl_set_insert_mode (int im, int force) +{ +#ifdef CURSOR_MODE + _rl_set_cursor (im, force); +#endif + + rl_insert_mode = im; +} + +/* Toggle overwrite mode. A positive explicit argument selects overwrite + mode. A negative or zero explicit argument selects insert mode. */ +int +rl_overwrite_mode (int count, int key) +{ + if (rl_explicit_arg == 0) + _rl_set_insert_mode (rl_insert_mode ^ 1, 0); + else if (count > 0) + _rl_set_insert_mode (RL_IM_OVERWRITE, 0); + else + _rl_set_insert_mode (RL_IM_INSERT, 0); + + return 0; +} diff --git a/readline/readline/nls.c b/readline/readline/nls.c new file mode 100644 index 0000000000..d2f67e0d3e --- /dev/null +++ b/readline/readline/nls.c @@ -0,0 +1,290 @@ +/* nls.c -- skeletal internationalization code. */ + +/* Copyright (C) 1996-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include +#endif + +#if defined (HAVE_LANGINFO_CODESET) +# include +#endif + +#include + +#include "rldefs.h" +#include "readline.h" +#include "rlshell.h" +#include "rlprivate.h" + +static int utf8locale PARAMS((char *)); + +#if !defined (HAVE_SETLOCALE) +/* A list of legal values for the LANG or LC_CTYPE environment variables. + If a locale name in this list is the value for the LC_ALL, LC_CTYPE, + or LANG environment variable (using the first of those with a value), + readline eight-bit mode is enabled. */ +static char *legal_lang_values[] = +{ + "iso88591", + "iso88592", + "iso88593", + "iso88594", + "iso88595", + "iso88596", + "iso88597", + "iso88598", + "iso88599", + "iso885910", + "koi8r", + "utf8", + 0 +}; + +static char *normalize_codeset PARAMS((char *)); +#endif /* !HAVE_SETLOCALE */ + +static char *find_codeset PARAMS((char *, size_t *)); + +static char *_rl_get_locale_var PARAMS((const char *)); + +static char * +_rl_get_locale_var (const char *v) +{ + char *lspec; + + lspec = sh_get_env_value ("LC_ALL"); + if (lspec == 0 || *lspec == 0) + lspec = sh_get_env_value (v); + if (lspec == 0 || *lspec == 0) + lspec = sh_get_env_value ("LANG"); + + return lspec; +} + +static int +utf8locale (char *lspec) +{ + char *cp; + size_t len; + +#if HAVE_LANGINFO_CODESET + cp = nl_langinfo (CODESET); + return (STREQ (cp, "UTF-8") || STREQ (cp, "utf8")); +#else + cp = find_codeset (lspec, &len); + + if (cp == 0 || len < 4 || len > 5) + return 0; + return ((len == 5) ? strncmp (cp, "UTF-8", len) == 0 : strncmp (cp, "utf8", 4) == 0); +#endif +} + +/* Query the right environment variables and call setlocale() to initialize + the C library locale settings. */ +char * +_rl_init_locale (void) +{ + char *ret, *lspec; + + /* Set the LC_CTYPE locale category from environment variables. */ + lspec = _rl_get_locale_var ("LC_CTYPE"); + /* Since _rl_get_locale_var queries the right environment variables, + we query the current locale settings with setlocale(), and, if + that doesn't return anything, we set lspec to the empty string to + force the subsequent call to setlocale() to define the `native' + environment. */ + if (lspec == 0 || *lspec == 0) + lspec = setlocale (LC_CTYPE, (char *)NULL); + if (lspec == 0) + lspec = ""; + ret = setlocale (LC_CTYPE, lspec); /* ok, since it does not change locale */ + + _rl_utf8locale = (ret && *ret) ? utf8locale (ret) : 0; + + return ret; +} + +/* Check for LC_ALL, LC_CTYPE, and LANG and use the first with a value + to decide the defaults for 8-bit character input and output. Returns + 1 if we set eight-bit mode. */ +int +_rl_init_eightbit (void) +{ +/* If we have setlocale(3), just check the current LC_CTYPE category + value, and go into eight-bit mode if it's not C or POSIX. */ +#if defined (HAVE_SETLOCALE) + char *lspec, *t; + + t = _rl_init_locale (); /* returns static pointer */ + + if (t && *t && (t[0] != 'C' || t[1]) && (STREQ (t, "POSIX") == 0)) + { + _rl_meta_flag = 1; + _rl_convert_meta_chars_to_ascii = 0; + _rl_output_meta_chars = 1; + return (1); + } + else + return (0); + +#else /* !HAVE_SETLOCALE */ + char *lspec, *t; + int i; + + /* We don't have setlocale. Finesse it. Check the environment for the + appropriate variables and set eight-bit mode if they have the right + values. */ + lspec = _rl_get_locale_var ("LC_CTYPE"); + + if (lspec == 0 || (t = normalize_codeset (lspec)) == 0) + return (0); + for (i = 0; t && legal_lang_values[i]; i++) + if (STREQ (t, legal_lang_values[i])) + { + _rl_meta_flag = 1; + _rl_convert_meta_chars_to_ascii = 0; + _rl_output_meta_chars = 1; + break; + } + + _rl_utf8locale = *t ? STREQ (t, "utf8") : 0; + + xfree (t); + return (legal_lang_values[i] ? 1 : 0); +#endif /* !HAVE_SETLOCALE */ +} + +#if !defined (HAVE_SETLOCALE) +static char * +normalize_codeset (char *codeset) +{ + size_t namelen, i; + int len, all_digits; + char *wp, *retval; + + codeset = find_codeset (codeset, &namelen); + + if (codeset == 0) + return (codeset); + + all_digits = 1; + for (len = 0, i = 0; i < namelen; i++) + { + if (ISALNUM ((unsigned char)codeset[i])) + { + len++; + all_digits &= _rl_digit_p (codeset[i]); + } + } + + retval = (char *)malloc ((all_digits ? 3 : 0) + len + 1); + if (retval == 0) + return ((char *)0); + + wp = retval; + /* Add `iso' to beginning of an all-digit codeset */ + if (all_digits) + { + *wp++ = 'i'; + *wp++ = 's'; + *wp++ = 'o'; + } + + for (i = 0; i < namelen; i++) + if (ISALPHA ((unsigned char)codeset[i])) + *wp++ = _rl_to_lower (codeset[i]); + else if (_rl_digit_p (codeset[i])) + *wp++ = codeset[i]; + *wp = '\0'; + + return retval; +} +#endif /* !HAVE_SETLOCALE */ + +/* Isolate codeset portion of locale specification. */ +static char * +find_codeset (char *name, size_t *lenp) +{ + char *cp, *language, *result; + + cp = language = name; + result = (char *)0; + + while (*cp && *cp != '_' && *cp != '@' && *cp != '+' && *cp != ',') + cp++; + + /* This does not make sense: language has to be specified. As + an exception we allow the variable to contain only the codeset + name. Perhaps there are funny codeset names. */ + if (language == cp) + { + *lenp = strlen (language); + result = language; + } + else + { + /* Next is the territory. */ + if (*cp == '_') + do + ++cp; + while (*cp && *cp != '.' && *cp != '@' && *cp != '+' && *cp != ',' && *cp != '_'); + + /* Now, finally, is the codeset. */ + result = cp; + if (*cp == '.') + do + ++cp; + while (*cp && *cp != '@'); + + if (cp - result > 2) + { + result++; + *lenp = cp - result; + } + else + { + *lenp = strlen (language); + result = language; + } + } + + return result; +} diff --git a/readline/readline/parens.c b/readline/readline/parens.c new file mode 100644 index 0000000000..af47977362 --- /dev/null +++ b/readline/readline/parens.c @@ -0,0 +1,180 @@ +/* parens.c -- implementation of matching parentheses feature. */ + +/* Copyright (C) 1987, 1989, 1992-2015, 2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (__TANDEM) +# include +#endif + +#include "rlconf.h" + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif + +#include "posixselect.h" + +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +#include "readline.h" +#include "rlprivate.h" + +static int find_matching_open PARAMS((char *, int, int)); + +/* Non-zero means try to blink the matching open parenthesis when the + close parenthesis is inserted. */ +int rl_blink_matching_paren = 0; + +static int _paren_blink_usec = 500000; + +/* Change emacs_standard_keymap to have bindings for paren matching when + ON_OR_OFF is 1, change them back to self_insert when ON_OR_OFF == 0. */ +void +_rl_enable_paren_matching (int on_or_off) +{ + if (on_or_off) + { + /* ([{ */ + rl_bind_key_in_map (')', rl_insert_close, emacs_standard_keymap); + rl_bind_key_in_map (']', rl_insert_close, emacs_standard_keymap); + rl_bind_key_in_map ('}', rl_insert_close, emacs_standard_keymap); + +#if defined (VI_MODE) + /* ([{ */ + rl_bind_key_in_map (')', rl_insert_close, vi_insertion_keymap); + rl_bind_key_in_map (']', rl_insert_close, vi_insertion_keymap); + rl_bind_key_in_map ('}', rl_insert_close, vi_insertion_keymap); +#endif + } + else + { + /* ([{ */ + rl_bind_key_in_map (')', rl_insert, emacs_standard_keymap); + rl_bind_key_in_map (']', rl_insert, emacs_standard_keymap); + rl_bind_key_in_map ('}', rl_insert, emacs_standard_keymap); + +#if defined (VI_MODE) + /* ([{ */ + rl_bind_key_in_map (')', rl_insert, vi_insertion_keymap); + rl_bind_key_in_map (']', rl_insert, vi_insertion_keymap); + rl_bind_key_in_map ('}', rl_insert, vi_insertion_keymap); +#endif + } +} + +int +rl_set_paren_blink_timeout (int u) +{ + int o; + + o = _paren_blink_usec; + if (u > 0) + _paren_blink_usec = u; + return (o); +} + +int +rl_insert_close (int count, int invoking_key) +{ + if (rl_explicit_arg || !rl_blink_matching_paren) + _rl_insert_char (count, invoking_key); + else + { +#if defined (HAVE_SELECT) + int orig_point, match_point, ready; + struct timeval timer; + fd_set readfds; + + _rl_insert_char (1, invoking_key); + (*rl_redisplay_function) (); + match_point = + find_matching_open (rl_line_buffer, rl_point - 2, invoking_key); + + /* Emacs might message or ring the bell here, but I don't. */ + if (match_point < 0) + return 1; + + FD_ZERO (&readfds); + FD_SET (fileno (rl_instream), &readfds); + USEC_TO_TIMEVAL (_paren_blink_usec, timer); + + orig_point = rl_point; + rl_point = match_point; + (*rl_redisplay_function) (); + ready = select (1, &readfds, (fd_set *)NULL, (fd_set *)NULL, &timer); + rl_point = orig_point; +#else /* !HAVE_SELECT */ + _rl_insert_char (count, invoking_key); +#endif /* !HAVE_SELECT */ + } + return 0; +} + +static int +find_matching_open (char *string, int from, int closer) +{ + register int i; + int opener, level, delimiter; + + switch (closer) + { + case ']': opener = '['; break; + case '}': opener = '{'; break; + case ')': opener = '('; break; + default: + return (-1); + } + + level = 1; /* The closer passed in counts as 1. */ + delimiter = 0; /* Delimited state unknown. */ + + for (i = from; i > -1; i--) + { + if (delimiter && (string[i] == delimiter)) + delimiter = 0; + else if (rl_basic_quote_characters && strchr (rl_basic_quote_characters, string[i])) + delimiter = string[i]; + else if (!delimiter && (string[i] == closer)) + level++; + else if (!delimiter && (string[i] == opener)) + level--; + + if (!level) + break; + } + return (i); +} diff --git a/readline/readline/parse-colors.c b/readline/readline/parse-colors.c new file mode 100644 index 0000000000..05ec9bc36a --- /dev/null +++ b/readline/readline/parse-colors.c @@ -0,0 +1,440 @@ +/* `dir', `vdir' and `ls' directory listing programs for GNU. + + Modified by Chet Ramey for Readline. + + Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012, 2017 + Free Software Foundation, Inc. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +/* Written by Richard Stallman and David MacKenzie. */ + +/* Color support by Peter Anvin and Dennis + Flaherty based on original patches by + Greg Lee . */ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +// strdup() / strcpy() +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +// abort() +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "rldefs.h" // STREQ, savestring +#include "readline.h" +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +#include "colors.h" +#include "parse-colors.h" + +#if defined (COLOR_SUPPORT) + +static bool get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count); + +struct bin_str _rl_color_indicator[] = + { + { LEN_STR_PAIR ("\033[") }, // lc: Left of color sequence + { LEN_STR_PAIR ("m") }, // rc: Right of color sequence + { 0, NULL }, // ec: End color (replaces lc+no+rc) + { LEN_STR_PAIR ("0") }, // rs: Reset to ordinary colors + { 0, NULL }, // no: Normal + { 0, NULL }, // fi: File: default + { LEN_STR_PAIR ("01;34") }, // di: Directory: bright blue + { LEN_STR_PAIR ("01;36") }, // ln: Symlink: bright cyan + { LEN_STR_PAIR ("33") }, // pi: Pipe: yellow/brown + { LEN_STR_PAIR ("01;35") }, // so: Socket: bright magenta + { LEN_STR_PAIR ("01;33") }, // bd: Block device: bright yellow + { LEN_STR_PAIR ("01;33") }, // cd: Char device: bright yellow + { 0, NULL }, // mi: Missing file: undefined + { 0, NULL }, // or: Orphaned symlink: undefined + { LEN_STR_PAIR ("01;32") }, // ex: Executable: bright green + { LEN_STR_PAIR ("01;35") }, // do: Door: bright magenta + { LEN_STR_PAIR ("37;41") }, // su: setuid: white on red + { LEN_STR_PAIR ("30;43") }, // sg: setgid: black on yellow + { LEN_STR_PAIR ("37;44") }, // st: sticky: black on blue + { LEN_STR_PAIR ("34;42") }, // ow: other-writable: blue on green + { LEN_STR_PAIR ("30;42") }, // tw: ow w/ sticky: black on green + { LEN_STR_PAIR ("30;41") }, // ca: black on red + { 0, NULL }, // mh: disabled by default + { LEN_STR_PAIR ("\033[K") }, // cl: clear to end of line + }; + +/* Parse a string as part of the LS_COLORS variable; this may involve + decoding all kinds of escape characters. If equals_end is set an + unescaped equal sign ends the string, otherwise only a : or \0 + does. Set *OUTPUT_COUNT to the number of bytes output. Return + true if successful. + + The resulting string is *not* null-terminated, but may contain + embedded nulls. + + Note that both dest and src are char **; on return they point to + the first free byte after the array and the character that ended + the input string, respectively. */ + +static bool +get_funky_string (char **dest, const char **src, bool equals_end, size_t *output_count) { + char num; /* For numerical codes */ + size_t count; /* Something to count with */ + enum { + ST_GND, ST_BACKSLASH, ST_OCTAL, ST_HEX, ST_CARET, ST_END, ST_ERROR + } state; + const char *p; + char *q; + + p = *src; /* We don't want to double-indirect */ + q = *dest; /* the whole darn time. */ + + count = 0; /* No characters counted in yet. */ + num = 0; + + state = ST_GND; /* Start in ground state. */ + while (state < ST_END) + { + switch (state) + { + case ST_GND: /* Ground state (no escapes) */ + switch (*p) + { + case ':': + case '\0': + state = ST_END; /* End of string */ + break; + case '\\': + state = ST_BACKSLASH; /* Backslash scape sequence */ + ++p; + break; + case '^': + state = ST_CARET; /* Caret escape */ + ++p; + break; + case '=': + if (equals_end) + { + state = ST_END; /* End */ + break; + } + /* else fall through */ + default: + *(q++) = *(p++); + ++count; + break; + } + break; + + case ST_BACKSLASH: /* Backslash escaped character */ + switch (*p) + { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + state = ST_OCTAL; /* Octal sequence */ + num = *p - '0'; + break; + case 'x': + case 'X': + state = ST_HEX; /* Hex sequence */ + num = 0; + break; + case 'a': /* Bell */ + num = '\a'; + break; + case 'b': /* Backspace */ + num = '\b'; + break; + case 'e': /* Escape */ + num = 27; + break; + case 'f': /* Form feed */ + num = '\f'; + break; + case 'n': /* Newline */ + num = '\n'; + break; + case 'r': /* Carriage return */ + num = '\r'; + break; + case 't': /* Tab */ + num = '\t'; + break; + case 'v': /* Vtab */ + num = '\v'; + break; + case '?': /* Delete */ + num = 127; + break; + case '_': /* Space */ + num = ' '; + break; + case '\0': /* End of string */ + state = ST_ERROR; /* Error! */ + break; + default: /* Escaped character like \ ^ : = */ + num = *p; + break; + } + if (state == ST_BACKSLASH) + { + *(q++) = num; + ++count; + state = ST_GND; + } + ++p; + break; + + case ST_OCTAL: /* Octal sequence */ + if (*p < '0' || *p > '7') + { + *(q++) = num; + ++count; + state = ST_GND; + } + else + num = (num << 3) + (*(p++) - '0'); + break; + + case ST_HEX: /* Hex sequence */ + switch (*p) + { + case '0': + case '1': + case '2': + case '3': + case '4': + case '5': + case '6': + case '7': + case '8': + case '9': + num = (num << 4) + (*(p++) - '0'); + break; + case 'a': + case 'b': + case 'c': + case 'd': + case 'e': + case 'f': + num = (num << 4) + (*(p++) - 'a') + 10; + break; + case 'A': + case 'B': + case 'C': + case 'D': + case 'E': + case 'F': + num = (num << 4) + (*(p++) - 'A') + 10; + break; + default: + *(q++) = num; + ++count; + state = ST_GND; + break; + } + break; + + case ST_CARET: /* Caret escape */ + state = ST_GND; /* Should be the next state... */ + if (*p >= '@' && *p <= '~') + { + *(q++) = *(p++) & 037; + ++count; + } + else if (*p == '?') + { + *(q++) = 127; + ++count; + } + else + state = ST_ERROR; + break; + + default: + /* should we ? */ + /* abort (); no, we should not */ + state = ST_ERROR; + break; + } + } + + *dest = q; + *src = p; + *output_count = count; + + return state != ST_ERROR; +} +#endif /* COLOR_SUPPORT */ + +void _rl_parse_colors(void) +{ +#if defined (COLOR_SUPPORT) + const char *p; /* Pointer to character being parsed */ + char *buf; /* color_buf buffer pointer */ + int state; /* State of parser */ + int ind_no; /* Indicator number */ + char label[3]; /* Indicator label */ + COLOR_EXT_TYPE *ext; /* Extension we are working on */ + + p = sh_get_env_value ("LS_COLORS"); + if (p == 0 || *p == '\0') + { + _rl_color_ext_list = NULL; + return; + } + + ext = NULL; + strcpy (label, "??"); + + /* This is an overly conservative estimate, but any possible + LS_COLORS string will *not* generate a color_buf longer than + itself, so it is a safe way of allocating a buffer in + advance. */ + buf = color_buf = savestring (p); + + state = 1; + while (state > 0) + { + switch (state) + { + case 1: /* First label character */ + switch (*p) + { + case ':': + ++p; + break; + + case '*': + /* Allocate new extension block and add to head of + linked list (this way a later definition will + override an earlier one, which can be useful for + having terminal-specific defs override global). */ + + ext = (COLOR_EXT_TYPE *)xmalloc (sizeof *ext); + ext->next = _rl_color_ext_list; + _rl_color_ext_list = ext; + + ++p; + ext->ext.string = buf; + + state = (get_funky_string (&buf, &p, true, &ext->ext.len) + ? 4 : -1); + break; + + case '\0': + state = 0; /* Done! */ + break; + + default: /* Assume it is file type label */ + label[0] = *(p++); + state = 2; + break; + } + break; + + case 2: /* Second label character */ + if (*p) + { + label[1] = *(p++); + state = 3; + } + else + state = -1; /* Error */ + break; + + case 3: /* Equal sign after indicator label */ + state = -1; /* Assume failure... */ + if (*(p++) == '=')/* It *should* be... */ + { + for (ind_no = 0; indicator_name[ind_no] != NULL; ++ind_no) + { + if (STREQ (label, indicator_name[ind_no])) + { + _rl_color_indicator[ind_no].string = buf; + state = (get_funky_string (&buf, &p, false, + &_rl_color_indicator[ind_no].len) + ? 1 : -1); + break; + } + } + if (state == -1) + { + _rl_errmsg ("LS_COLORS: unrecognized prefix: %s", label); + /* recover from an unrecognized prefix */ + while (p && *p && *p != ':') + p++; + if (p && *p == ':') + state = 1; + else if (p && *p == 0) + state = 0; + } + } + break; + + case 4: /* Equal sign after *.ext */ + if (*(p++) == '=') + { + ext->seq.string = buf; + state = (get_funky_string (&buf, &p, false, &ext->seq.len) + ? 1 : -1); + } + else + state = -1; + /* XXX - recover here as with an unrecognized prefix? */ + if (state == -1 && ext->ext.string) + _rl_errmsg ("LS_COLORS: syntax error: %s", ext->ext.string); + break; + } + } + + if (state < 0) + { + COLOR_EXT_TYPE *e; + COLOR_EXT_TYPE *e2; + + _rl_errmsg ("unparsable value for LS_COLORS environment variable"); + free (color_buf); + for (e = _rl_color_ext_list; e != NULL; /* empty */) + { + e2 = e; + e = e->next; + free (e2); + } + _rl_color_ext_list = NULL; + _rl_colored_stats = 0; /* can't have colored stats without colors */ + } +#else /* !COLOR_SUPPORT */ + ; +#endif /* !COLOR_SUPPORT */ +} diff --git a/readline/readline/parse-colors.h b/readline/readline/parse-colors.h new file mode 100644 index 0000000000..aef86f784d --- /dev/null +++ b/readline/readline/parse-colors.h @@ -0,0 +1,46 @@ +/* `dir', `vdir' and `ls' directory listing programs for GNU. + + Modified by Chet Ramey for Readline. + + Copyright (C) 1985, 1988, 1990-1991, 1995-2010, 2012 Free Software Foundation, + Inc. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +/* Written by Richard Stallman and David MacKenzie. */ + +/* Color support by Peter Anvin and Dennis + Flaherty based on original patches by + Greg Lee . */ + +#ifndef _PARSE_COLORS_H_ +#define _PARSE_COLORS_H_ + +#include "readline.h" + +#define LEN_STR_PAIR(s) sizeof (s) - 1, s + +void _rl_parse_colors (void); + +static const char *const indicator_name[]= + { + "lc", "rc", "ec", "rs", "no", "fi", "di", "ln", "pi", "so", + "bd", "cd", "mi", "or", "ex", "do", "su", "sg", "st", + "ow", "tw", "ca", "mh", "cl", NULL + }; + +/* Buffer for color sequences */ +static char *color_buf; + +#endif /* !_PARSE_COLORS_H_ */ diff --git a/readline/readline/patchlevel b/readline/readline/patchlevel new file mode 100644 index 0000000000..d8c9df7e6b --- /dev/null +++ b/readline/readline/patchlevel @@ -0,0 +1,3 @@ +# Do not edit -- exists only for use by patch + +0 diff --git a/readline/readline/posixdir.h b/readline/readline/posixdir.h new file mode 100644 index 0000000000..0921c5d752 --- /dev/null +++ b/readline/readline/posixdir.h @@ -0,0 +1,71 @@ +/* posixdir.h -- Posix directory reading includes and defines. */ + +/* Copyright (C) 1987,1991,2012 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Bash is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Bash. If not, see . +*/ + +/* This file should be included instead of or . */ + +#if !defined (_POSIXDIR_H_) +#define _POSIXDIR_H_ + +#if defined (HAVE_DIRENT_H) +# include +# if defined (HAVE_STRUCT_DIRENT_D_NAMLEN) +# define D_NAMLEN(d) ((d)->d_namlen) +# else +# define D_NAMLEN(d) (strlen ((d)->d_name)) +# endif /* !HAVE_STRUCT_DIRENT_D_NAMLEN */ +#else +# if defined (HAVE_SYS_NDIR_H) +# include +# endif +# if defined (HAVE_SYS_DIR_H) +# include +# endif +# if defined (HAVE_NDIR_H) +# include +# endif +# if !defined (dirent) +# define dirent direct +# endif /* !dirent */ +# define D_NAMLEN(d) ((d)->d_namlen) +#endif /* !HAVE_DIRENT_H */ + +/* The bash code fairly consistenly uses d_fileno; make sure it's available */ +#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (HAVE_STRUCT_DIRENT_D_FILENO) +# define d_fileno d_ino +#endif + +/* Posix does not require that the d_ino field be present, and some + systems do not provide it. */ +#if !defined (HAVE_STRUCT_DIRENT_D_INO) || defined (BROKEN_DIRENT_D_INO) +# define REAL_DIR_ENTRY(dp) 1 +#else +# define REAL_DIR_ENTRY(dp) (dp->d_ino != 0) +#endif /* _POSIX_SOURCE */ + +#if defined (HAVE_STRUCT_DIRENT_D_INO) && !defined (BROKEN_DIRENT_D_INO) +# define D_INO_AVAILABLE +#endif + +/* Signal the rest of the code that it can safely use dirent.d_fileno */ +#if defined (D_INO_AVAILABLE) || defined (HAVE_STRUCT_DIRENT_D_FILENO) +# define D_FILENO_AVAILABLE 1 +#endif + +#endif /* !_POSIXDIR_H_ */ diff --git a/readline/readline/posixjmp.h b/readline/readline/posixjmp.h new file mode 100644 index 0000000000..9c7e99ed42 --- /dev/null +++ b/readline/readline/posixjmp.h @@ -0,0 +1,46 @@ +/* posixjmp.h -- wrapper for setjmp.h with changes for POSIX systems. */ + +/* Copyright (C) 1987,1991-2015 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Bash is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Bash. If not, see . +*/ + +#ifndef _POSIXJMP_H_ +#define _POSIXJMP_H_ + +#include + +/* This *must* be included *after* config.h */ + +#if defined (HAVE_POSIX_SIGSETJMP) +# define procenv_t sigjmp_buf + +# define setjmp_nosigs(x) sigsetjmp((x), 0) +# define setjmp_sigs(x) sigsetjmp((x), 1) + +# define _rl_longjmp(x, n) siglongjmp((x), (n)) +# define sh_longjmp(x, n) siglongjmp((x), (n)) +#else +# define procenv_t jmp_buf + +# define setjmp_nosigs setjmp +# define setjmp_sigs setjmp + +# define _rl_longjmp(x, n) longjmp((x), (n)) +# define sh_longjmp(x, n) longjmp((x), (n)) +#endif + +#endif /* _POSIXJMP_H_ */ diff --git a/readline/readline/posixselect.h b/readline/readline/posixselect.h new file mode 100644 index 0000000000..da6a1ace0c --- /dev/null +++ b/readline/readline/posixselect.h @@ -0,0 +1,47 @@ +/* posixselect.h -- wrapper for select(2) includes and definitions */ + +/* Copyright (C) 2009 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Bash is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Bash. If not, see . +*/ + +#ifndef _POSIXSELECT_H_ +#define _POSIXSELECT_H_ + +#if defined (FD_SET) && !defined (HAVE_SELECT) +# define HAVE_SELECT 1 +#endif + +#if defined (HAVE_SELECT) +# if !defined (HAVE_SYS_SELECT_H) || !defined (M_UNIX) +# include +# endif +#endif /* HAVE_SELECT */ +#if defined (HAVE_SYS_SELECT_H) +# include +#endif + +#ifndef USEC_PER_SEC +# define USEC_PER_SEC 1000000 +#endif + +#define USEC_TO_TIMEVAL(us, tv) \ +do { \ + (tv).tv_sec = (us) / USEC_PER_SEC; \ + (tv).tv_usec = (us) % USEC_PER_SEC; \ +} while (0) + +#endif /* _POSIXSELECT_H_ */ diff --git a/readline/readline/posixstat.h b/readline/readline/posixstat.h new file mode 100644 index 0000000000..3eb7f2906f --- /dev/null +++ b/readline/readline/posixstat.h @@ -0,0 +1,142 @@ +/* posixstat.h -- Posix stat(2) definitions for systems that + don't have them. */ + +/* Copyright (C) 1987,1991 Free Software Foundation, Inc. + + This file is part of GNU Bash, the Bourne Again SHell. + + Bash is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Bash is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Bash. If not, see . +*/ + +/* This file should be included instead of . + It relies on the local sys/stat.h to work though. */ +#if !defined (_POSIXSTAT_H_) +#define _POSIXSTAT_H_ + +#include + +#if defined (STAT_MACROS_BROKEN) +# undef S_ISBLK +# undef S_ISCHR +# undef S_ISDIR +# undef S_ISFIFO +# undef S_ISREG +# undef S_ISLNK +#endif /* STAT_MACROS_BROKEN */ + +/* These are guaranteed to work only on isc386 */ +#if !defined (S_IFDIR) && !defined (S_ISDIR) +# define S_IFDIR 0040000 +#endif /* !S_IFDIR && !S_ISDIR */ +#if !defined (S_IFMT) +# define S_IFMT 0170000 +#endif /* !S_IFMT */ + +/* Posix 1003.1 5.6.1.1 file types */ + +/* Some Posix-wannabe systems define _S_IF* macros instead of S_IF*, but + do not provide the S_IS* macros that Posix requires. */ + +#if defined (_S_IFMT) && !defined (S_IFMT) +#define S_IFMT _S_IFMT +#endif +#if defined (_S_IFIFO) && !defined (S_IFIFO) +#define S_IFIFO _S_IFIFO +#endif +#if defined (_S_IFCHR) && !defined (S_IFCHR) +#define S_IFCHR _S_IFCHR +#endif +#if defined (_S_IFDIR) && !defined (S_IFDIR) +#define S_IFDIR _S_IFDIR +#endif +#if defined (_S_IFBLK) && !defined (S_IFBLK) +#define S_IFBLK _S_IFBLK +#endif +#if defined (_S_IFREG) && !defined (S_IFREG) +#define S_IFREG _S_IFREG +#endif +#if defined (_S_IFLNK) && !defined (S_IFLNK) +#define S_IFLNK _S_IFLNK +#endif +#if defined (_S_IFSOCK) && !defined (S_IFSOCK) +#define S_IFSOCK _S_IFSOCK +#endif + +/* Test for each symbol individually and define the ones necessary (some + systems claiming Posix compatibility define some but not all). */ + +#if defined (S_IFBLK) && !defined (S_ISBLK) +#define S_ISBLK(m) (((m)&S_IFMT) == S_IFBLK) /* block device */ +#endif + +#if defined (S_IFCHR) && !defined (S_ISCHR) +#define S_ISCHR(m) (((m)&S_IFMT) == S_IFCHR) /* character device */ +#endif + +#if defined (S_IFDIR) && !defined (S_ISDIR) +#define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) /* directory */ +#endif + +#if defined (S_IFREG) && !defined (S_ISREG) +#define S_ISREG(m) (((m)&S_IFMT) == S_IFREG) /* file */ +#endif + +#if defined (S_IFIFO) && !defined (S_ISFIFO) +#define S_ISFIFO(m) (((m)&S_IFMT) == S_IFIFO) /* fifo - named pipe */ +#endif + +#if defined (S_IFLNK) && !defined (S_ISLNK) +#define S_ISLNK(m) (((m)&S_IFMT) == S_IFLNK) /* symbolic link */ +#endif + +#if defined (S_IFSOCK) && !defined (S_ISSOCK) +#define S_ISSOCK(m) (((m)&S_IFMT) == S_IFSOCK) /* socket */ +#endif + +/* + * POSIX 1003.1 5.6.1.2 File Modes + */ + +#if !defined (S_IRWXU) +# if !defined (S_IREAD) +# define S_IREAD 00400 +# define S_IWRITE 00200 +# define S_IEXEC 00100 +# endif /* S_IREAD */ + +# if !defined (S_IRUSR) +# define S_IRUSR S_IREAD /* read, owner */ +# define S_IWUSR S_IWRITE /* write, owner */ +# define S_IXUSR S_IEXEC /* execute, owner */ + +# define S_IRGRP (S_IREAD >> 3) /* read, group */ +# define S_IWGRP (S_IWRITE >> 3) /* write, group */ +# define S_IXGRP (S_IEXEC >> 3) /* execute, group */ + +# define S_IROTH (S_IREAD >> 6) /* read, other */ +# define S_IWOTH (S_IWRITE >> 6) /* write, other */ +# define S_IXOTH (S_IEXEC >> 6) /* execute, other */ +# endif /* !S_IRUSR */ + +# define S_IRWXU (S_IRUSR | S_IWUSR | S_IXUSR) +# define S_IRWXG (S_IRGRP | S_IWGRP | S_IXGRP) +# define S_IRWXO (S_IROTH | S_IWOTH | S_IXOTH) +#endif /* !S_IRWXU */ + +/* These are non-standard, but are used in builtins.c$symbolic_umask() */ +#define S_IRUGO (S_IRUSR | S_IRGRP | S_IROTH) +#define S_IWUGO (S_IWUSR | S_IWGRP | S_IWOTH) +#define S_IXUGO (S_IXUSR | S_IXGRP | S_IXOTH) + +#endif /* _POSIXSTAT_H_ */ diff --git a/readline/readline/readline.c b/readline/readline/readline.c new file mode 100644 index 0000000000..678f989c51 --- /dev/null +++ b/readline/readline/readline.c @@ -0,0 +1,1450 @@ +/* readline.c -- a general facility for reading lines of input + with emacs style editing and completion. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include "posixstat.h" +#include +#if defined (HAVE_SYS_FILE_H) +# include +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include +#endif + +#include +#include "posixjmp.h" +#include + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +#if defined (__EMX__) +# define INCL_DOSPROCESS +# include +#endif /* __EMX__ */ + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +#ifndef RL_LIBRARY_VERSION +# define RL_LIBRARY_VERSION "5.1" +#endif + +#ifndef RL_READLINE_VERSION +# define RL_READLINE_VERSION 0x0501 +#endif + +extern void _rl_free_history_entry PARAMS((HIST_ENTRY *)); + +#if defined (COLOR_SUPPORT) +extern void _rl_parse_colors PARAMS((void)); /* XXX */ +#endif + + +/* Forward declarations used in this file. */ +static char *readline_internal PARAMS((void)); +static void readline_initialize_everything PARAMS((void)); + +static void bind_arrow_keys_internal PARAMS((Keymap)); +static void bind_arrow_keys PARAMS((void)); + +static void bind_bracketed_paste_prefix PARAMS((void)); + +static void readline_default_bindings PARAMS((void)); +static void reset_default_bindings PARAMS((void)); + +static int _rl_subseq_result PARAMS((int, Keymap, int, int)); +static int _rl_subseq_getchar PARAMS((int)); + +/* **************************************************************** */ +/* */ +/* Line editing input utility */ +/* */ +/* **************************************************************** */ + +const char *rl_library_version = RL_LIBRARY_VERSION; + +int rl_readline_version = RL_READLINE_VERSION; + +/* True if this is `real' readline as opposed to some stub substitute. */ +int rl_gnu_readline_p = 1; + +/* A pointer to the keymap that is currently in use. + By default, it is the standard emacs keymap. */ +Keymap _rl_keymap = emacs_standard_keymap; + +/* The current style of editing. */ +int rl_editing_mode = emacs_mode; + +/* The current insert mode: input (the default) or overwrite */ +int rl_insert_mode = RL_IM_DEFAULT; + +/* Non-zero if we called this function from _rl_dispatch(). It's present + so functions can find out whether they were called from a key binding + or directly from an application. */ +int rl_dispatching; + +/* Non-zero if the previous command was a kill command. */ +int _rl_last_command_was_kill = 0; + +/* The current value of the numeric argument specified by the user. */ +int rl_numeric_arg = 1; + +/* Non-zero if an argument was typed. */ +int rl_explicit_arg = 0; + +/* Temporary value used while generating the argument. */ +int rl_arg_sign = 1; + +/* Non-zero means we have been called at least once before. */ +static int rl_initialized; + +#if 0 +/* If non-zero, this program is running in an EMACS buffer. */ +static int running_in_emacs; +#endif + +/* Flags word encapsulating the current readline state. */ +unsigned long rl_readline_state = RL_STATE_NONE; + +/* The current offset in the current input line. */ +int rl_point; + +/* Mark in the current input line. */ +int rl_mark; + +/* Length of the current input line. */ +int rl_end; + +/* Make this non-zero to return the current input_line. */ +int rl_done; + +/* The last function executed by readline. */ +rl_command_func_t *rl_last_func = (rl_command_func_t *)NULL; + +/* Top level environment for readline_internal (). */ +procenv_t _rl_top_level; + +/* The streams we interact with. */ +FILE *_rl_in_stream, *_rl_out_stream; + +/* The names of the streams that we do input and output to. */ +FILE *rl_instream = (FILE *)NULL; +FILE *rl_outstream = (FILE *)NULL; + +/* Non-zero means echo characters as they are read. Defaults to no echo; + set to 1 if there is a controlling terminal, we can get its attributes, + and the attributes include `echo'. Look at rltty.c:prepare_terminal_settings + for the code that sets it. */ +int _rl_echoing_p = 0; + +/* Current prompt. */ +char *rl_prompt = (char *)NULL; +int rl_visible_prompt_length = 0; + +/* Set to non-zero by calling application if it has already printed rl_prompt + and does not want readline to do it the first time. */ +int rl_already_prompted = 0; + +/* The number of characters read in order to type this complete command. */ +int rl_key_sequence_length = 0; + +/* If non-zero, then this is the address of a function to call just + before readline_internal_setup () prints the first prompt. */ +rl_hook_func_t *rl_startup_hook = (rl_hook_func_t *)NULL; + +/* If non-zero, this is the address of a function to call just before + readline_internal_setup () returns and readline_internal starts + reading input characters. */ +rl_hook_func_t *rl_pre_input_hook = (rl_hook_func_t *)NULL; + +/* What we use internally. You should always refer to RL_LINE_BUFFER. */ +static char *the_line; + +/* The character that can generate an EOF. Really read from + the terminal driver... just defaulted here. */ +int _rl_eof_char = CTRL ('D'); + +/* Non-zero makes this the next keystroke to read. */ +int rl_pending_input = 0; + +/* If non-zero when readline_internal returns, it means we found EOF */ +int _rl_eof_found = 0; + +/* Pointer to a useful terminal name. */ +const char *rl_terminal_name = (const char *)NULL; + +/* Non-zero means to always use horizontal scrolling in line display. */ +int _rl_horizontal_scroll_mode = 0; + +/* Non-zero means to display an asterisk at the starts of history lines + which have been modified. */ +int _rl_mark_modified_lines = 0; + +/* The style of `bell' notification preferred. This can be set to NO_BELL, + AUDIBLE_BELL, or VISIBLE_BELL. */ +int _rl_bell_preference = AUDIBLE_BELL; + +/* String inserted into the line by rl_insert_comment (). */ +char *_rl_comment_begin; + +/* Keymap holding the function currently being executed. */ +Keymap rl_executing_keymap; + +/* Keymap we're currently using to dispatch. */ +Keymap _rl_dispatching_keymap; + +/* Non-zero means to erase entire line, including prompt, on empty input lines. */ +int rl_erase_empty_line = 0; + +/* Non-zero means to read only this many characters rather than up to a + character bound to accept-line. */ +int rl_num_chars_to_read = 0; + +/* Line buffer and maintenance. */ +char *rl_line_buffer = (char *)NULL; +int rl_line_buffer_len = 0; + +/* Key sequence `contexts' */ +_rl_keyseq_cxt *_rl_kscxt = 0; + +int rl_executing_key; +char *rl_executing_keyseq = 0; +int _rl_executing_keyseq_size = 0; + +/* Timeout (specified in milliseconds) when reading characters making up an + ambiguous multiple-key sequence */ +int _rl_keyseq_timeout = 500; + +#define RESIZE_KEYSEQ_BUFFER() \ + do \ + { \ + if (rl_key_sequence_length + 2 >= _rl_executing_keyseq_size) \ + { \ + _rl_executing_keyseq_size += 16; \ + rl_executing_keyseq = xrealloc (rl_executing_keyseq, _rl_executing_keyseq_size); \ + } \ + } \ + while (0); + +/* Forward declarations used by the display, termcap, and history code. */ + +/* **************************************************************** */ +/* */ +/* `Forward' declarations */ +/* */ +/* **************************************************************** */ + +/* Non-zero means do not parse any lines other than comments and + parser directives. */ +unsigned char _rl_parsing_conditionalized_out = 0; + +/* Non-zero means to convert characters with the meta bit set to + escape-prefixed characters so we can indirect through + emacs_meta_keymap or vi_escape_keymap. */ +int _rl_convert_meta_chars_to_ascii = 1; + +/* Non-zero means to output characters with the meta bit set directly + rather than as a meta-prefixed escape sequence. */ +int _rl_output_meta_chars = 0; + +/* Non-zero means to look at the termios special characters and bind + them to equivalent readline functions at startup. */ +int _rl_bind_stty_chars = 1; + +/* Non-zero means to go through the history list at every newline (or + whenever rl_done is set and readline returns) and revert each line to + its initial state. */ +int _rl_revert_all_at_newline = 0; + +/* Non-zero means to honor the termios ECHOCTL bit and echo control + characters corresponding to keyboard-generated signals. */ +int _rl_echo_control_chars = 1; + +/* Non-zero means to prefix the displayed prompt with a character indicating + the editing mode: @ for emacs, : for vi-command, + for vi-insert. */ +int _rl_show_mode_in_prompt = 0; + +/* Non-zero means to attempt to put the terminal in `bracketed paste mode', + where it will prefix pasted text with an escape sequence and send + another to mark the end of the paste. */ +int _rl_enable_bracketed_paste = 0; + +/* **************************************************************** */ +/* */ +/* Top Level Functions */ +/* */ +/* **************************************************************** */ + +/* Non-zero means treat 0200 bit in terminal input as Meta bit. */ +int _rl_meta_flag = 0; /* Forward declaration */ + +/* Set up the prompt and expand it. Called from readline() and + rl_callback_handler_install (). */ +int +rl_set_prompt (const char *prompt) +{ + FREE (rl_prompt); + rl_prompt = prompt ? savestring (prompt) : (char *)NULL; + rl_display_prompt = rl_prompt ? rl_prompt : ""; + + rl_visible_prompt_length = rl_expand_prompt (rl_prompt); + return 0; +} + +/* Read a line of input. Prompt with PROMPT. An empty PROMPT means + none. A return value of NULL means that EOF was encountered. */ +char * +readline (const char *prompt) +{ + char *value; +#if 0 + int in_callback; +#endif + + /* If we are at EOF return a NULL string. */ + if (rl_pending_input == EOF) + { + rl_clear_pending_input (); + return ((char *)NULL); + } + +#if 0 + /* If readline() is called after installing a callback handler, temporarily + turn off the callback state to avoid ensuing messiness. Patch supplied + by the gdb folks. XXX -- disabled. This can be fooled and readline + left in a strange state by a poorly-timed longjmp. */ + if (in_callback = RL_ISSTATE (RL_STATE_CALLBACK)) + RL_UNSETSTATE (RL_STATE_CALLBACK); +#endif + + rl_set_prompt (prompt); + + rl_initialize (); + if (rl_prep_term_function) + (*rl_prep_term_function) (_rl_meta_flag); + +#if defined (HANDLE_SIGNALS) + rl_set_signals (); +#endif + + value = readline_internal (); + if (rl_deprep_term_function) + (*rl_deprep_term_function) (); + +#if defined (HANDLE_SIGNALS) + rl_clear_signals (); +#endif + +#if 0 + if (in_callback) + RL_SETSTATE (RL_STATE_CALLBACK); +#endif + +#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT) + if (value) + _rl_audit_tty (value); +#endif + + return (value); +} + +#if defined (READLINE_CALLBACKS) +# define STATIC_CALLBACK +#else +# define STATIC_CALLBACK static +#endif + +STATIC_CALLBACK void +readline_internal_setup (void) +{ + char *nprompt; + + _rl_in_stream = rl_instream; + _rl_out_stream = rl_outstream; + + /* Enable the meta key only for the duration of readline(), if this + terminal has one and the terminal has been initialized */ + if (_rl_enable_meta & RL_ISSTATE (RL_STATE_TERMPREPPED)) + _rl_enable_meta_key (); + + if (rl_startup_hook) + (*rl_startup_hook) (); + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + rl_vi_insertion_mode (1, 'i'); /* don't want to reset last */ + else +#endif /* VI_MODE */ + if (_rl_show_mode_in_prompt) + _rl_reset_prompt (); + + /* If we're not echoing, we still want to at least print a prompt, because + rl_redisplay will not do it for us. If the calling application has a + custom redisplay function, though, let that function handle it. */ + if (_rl_echoing_p == 0 && rl_redisplay_function == rl_redisplay) + { + if (rl_prompt && rl_already_prompted == 0) + { + nprompt = _rl_strip_prompt (rl_prompt); + fprintf (_rl_out_stream, "%s", nprompt); + fflush (_rl_out_stream); + xfree (nprompt); + } + } + else + { + if (rl_prompt && rl_already_prompted) + rl_on_new_line_with_prompt (); + else + rl_on_new_line (); + (*rl_redisplay_function) (); + } + + if (rl_pre_input_hook) + (*rl_pre_input_hook) (); + + RL_CHECK_SIGNALS (); +} + +STATIC_CALLBACK char * +readline_internal_teardown (int eof) +{ + char *temp; + HIST_ENTRY *entry; + + RL_CHECK_SIGNALS (); + + /* Restore the original of this history line, iff the line that we + are editing was originally in the history, AND the line has changed. */ + entry = current_history (); + + if (entry && rl_undo_list) + { + temp = savestring (the_line); + rl_revert_line (1, 0); + entry = replace_history_entry (where_history (), the_line, (histdata_t)NULL); + _rl_free_history_entry (entry); + + strcpy (the_line, temp); + xfree (temp); + } + + if (_rl_revert_all_at_newline) + _rl_revert_all_lines (); + + /* At any rate, it is highly likely that this line has an undo list. Get + rid of it now. */ + if (rl_undo_list) + rl_free_undo_list (); + + /* Disable the meta key, if this terminal has one and we were told to use it. + The check whether or not we sent the enable string is in + _rl_disable_meta_key(); the flag is set in _rl_enable_meta_key */ + _rl_disable_meta_key (); + + /* Restore normal cursor, if available. */ + _rl_set_insert_mode (RL_IM_INSERT, 0); + + return (eof ? (char *)NULL : savestring (the_line)); +} + +void +_rl_internal_char_cleanup (void) +{ +#if defined (VI_MODE) + /* In vi mode, when you exit insert mode, the cursor moves back + over the previous character. We explicitly check for that here. */ + if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap) + rl_vi_check (); +#endif /* VI_MODE */ + + if (rl_num_chars_to_read && rl_end >= rl_num_chars_to_read) + { + (*rl_redisplay_function) (); + _rl_want_redisplay = 0; + rl_newline (1, '\n'); + } + + if (rl_done == 0) + { + (*rl_redisplay_function) (); + _rl_want_redisplay = 0; + } + + /* If the application writer has told us to erase the entire line if + the only character typed was something bound to rl_newline, do so. */ + if (rl_erase_empty_line && rl_done && rl_last_func == rl_newline && + rl_point == 0 && rl_end == 0) + _rl_erase_entire_line (); +} + +STATIC_CALLBACK int +#if defined (READLINE_CALLBACKS) +readline_internal_char (void) +#else +readline_internal_charloop (void) +#endif +{ + static int lastc, eof_found; + int c, code, lk, r; + + lastc = EOF; + +#if !defined (READLINE_CALLBACKS) + eof_found = 0; + while (rl_done == 0) + { +#endif + lk = _rl_last_command_was_kill; + +#if defined (HAVE_POSIX_SIGSETJMP) + code = sigsetjmp (_rl_top_level, 0); +#else + code = setjmp (_rl_top_level); +#endif + + if (code) + { + (*rl_redisplay_function) (); + _rl_want_redisplay = 0; + /* If we get here, we're not being called from something dispatched + from _rl_callback_read_char(), which sets up its own value of + _rl_top_level (saving and restoring the old, of course), so + we can just return here. */ + if (RL_ISSTATE (RL_STATE_CALLBACK)) + return (0); + } + + if (rl_pending_input == 0) + { + /* Then initialize the argument and number of keys read. */ + _rl_reset_argument (); + rl_executing_keyseq[rl_key_sequence_length = 0] = '\0'; + } + + RL_SETSTATE(RL_STATE_READCMD); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_READCMD); + + /* look at input.c:rl_getc() for the circumstances under which this will + be returned; punt immediately on read error without converting it to + a newline; assume that rl_read_key has already called the signal + handler. */ + if (c == READERR) + { +#if defined (READLINE_CALLBACKS) + RL_SETSTATE(RL_STATE_DONE); + return (rl_done = 1); +#else + eof_found = 1; + break; +#endif + } + + /* EOF typed to a non-blank line is ^D the first time, EOF the second + time in a row. This won't return any partial line read from the tty. + If we want to change this, to force any existing line to be returned + when read(2) reads EOF, for example, this is the place to change. */ + if (c == EOF && rl_end) + { + if (RL_SIG_RECEIVED ()) + { + RL_CHECK_SIGNALS (); + if (rl_signal_event_hook) + (*rl_signal_event_hook) (); /* XXX */ + } + + /* XXX - reading two consecutive EOFs returns EOF */ + if (RL_ISSTATE (RL_STATE_TERMPREPPED)) + { + if (lastc == _rl_eof_char || lastc == EOF) + rl_end = 0; + else + c = _rl_eof_char; + } + else + c = NEWLINE; + } + + /* The character _rl_eof_char typed to blank line, and not as the + previous character is interpreted as EOF. This doesn't work when + READLINE_CALLBACKS is defined, so hitting a series of ^Ds will + erase all the chars on the line and then return EOF. */ + if (((c == _rl_eof_char && lastc != c) || c == EOF) && rl_end == 0) + { +#if defined (READLINE_CALLBACKS) + RL_SETSTATE(RL_STATE_DONE); + return (rl_done = 1); +#else + eof_found = 1; + break; +#endif + } + + lastc = c; + r = _rl_dispatch ((unsigned char)c, _rl_keymap); + RL_CHECK_SIGNALS (); + + /* If there was no change in _rl_last_command_was_kill, then no kill + has taken place. Note that if input is pending we are reading + a prefix command, so nothing has changed yet. */ + if (rl_pending_input == 0 && lk == _rl_last_command_was_kill) + _rl_last_command_was_kill = 0; + + _rl_internal_char_cleanup (); + +#if defined (READLINE_CALLBACKS) + return 0; +#else + } + + return (eof_found); +#endif +} + +#if defined (READLINE_CALLBACKS) +static int +readline_internal_charloop (void) +{ + int eof = 1; + + while (rl_done == 0) + eof = readline_internal_char (); + return (eof); +} +#endif /* READLINE_CALLBACKS */ + +/* Read a line of input from the global rl_instream, doing output on + the global rl_outstream. + If rl_prompt is non-null, then that is our prompt. */ +static char * +readline_internal (void) +{ + readline_internal_setup (); + _rl_eof_found = readline_internal_charloop (); + return (readline_internal_teardown (_rl_eof_found)); +} + +void +_rl_init_line_state (void) +{ + rl_point = rl_end = rl_mark = 0; + the_line = rl_line_buffer; + the_line[0] = 0; +} + +void +_rl_set_the_line (void) +{ + the_line = rl_line_buffer; +} + +#if defined (READLINE_CALLBACKS) +_rl_keyseq_cxt * +_rl_keyseq_cxt_alloc (void) +{ + _rl_keyseq_cxt *cxt; + + cxt = (_rl_keyseq_cxt *)xmalloc (sizeof (_rl_keyseq_cxt)); + + cxt->flags = cxt->subseq_arg = cxt->subseq_retval = 0; + + cxt->okey = 0; + cxt->ocxt = _rl_kscxt; + cxt->childval = 42; /* sentinel value */ + + return cxt; +} + +void +_rl_keyseq_cxt_dispose (_rl_keyseq_cxt *cxt) +{ + xfree (cxt); +} + +void +_rl_keyseq_chain_dispose (void) +{ + _rl_keyseq_cxt *cxt; + + while (_rl_kscxt) + { + cxt = _rl_kscxt; + _rl_kscxt = _rl_kscxt->ocxt; + _rl_keyseq_cxt_dispose (cxt); + } +} +#endif + +static int +_rl_subseq_getchar (int key) +{ + int k; + + if (key == ESC) + RL_SETSTATE(RL_STATE_METANEXT); + RL_SETSTATE(RL_STATE_MOREINPUT); + k = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + if (key == ESC) + RL_UNSETSTATE(RL_STATE_METANEXT); + + return k; +} + +#if defined (READLINE_CALLBACKS) +int +_rl_dispatch_callback (_rl_keyseq_cxt *cxt) +{ + int nkey, r; + + /* For now */ + /* The first time this context is used, we want to read input and dispatch + on it. When traversing the chain of contexts back `up', we want to use + the value from the next context down. We're simulating recursion using + a chain of contexts. */ + if ((cxt->flags & KSEQ_DISPATCHED) == 0) + { + nkey = _rl_subseq_getchar (cxt->okey); + if (nkey < 0) + { + _rl_abort_internal (); + return -1; + } + r = _rl_dispatch_subseq (nkey, cxt->dmap, cxt->subseq_arg); + cxt->flags |= KSEQ_DISPATCHED; + } + else + r = cxt->childval; + + /* For now */ + if (r != -3) /* don't do this if we indicate there will be other matches */ + r = _rl_subseq_result (r, cxt->oldmap, cxt->okey, (cxt->flags & KSEQ_SUBSEQ)); + + RL_CHECK_SIGNALS (); + /* We only treat values < 0 specially to simulate recursion. */ + if (r >= 0 || (r == -1 && (cxt->flags & KSEQ_SUBSEQ) == 0)) /* success! or failure! */ + { + _rl_keyseq_chain_dispose (); + RL_UNSETSTATE (RL_STATE_MULTIKEY); + return r; + } + + if (r != -3) /* magic value that says we added to the chain */ + _rl_kscxt = cxt->ocxt; + if (_rl_kscxt) + _rl_kscxt->childval = r; + if (r != -3) + _rl_keyseq_cxt_dispose (cxt); + + return r; +} +#endif /* READLINE_CALLBACKS */ + +/* Do the command associated with KEY in MAP. + If the associated command is really a keymap, then read + another key, and dispatch into that map. */ +int +_rl_dispatch (register int key, Keymap map) +{ + _rl_dispatching_keymap = map; + return _rl_dispatch_subseq (key, map, 0); +} + +int +_rl_dispatch_subseq (register int key, Keymap map, int got_subseq) +{ + int r, newkey; + char *macro; + rl_command_func_t *func; +#if defined (READLINE_CALLBACKS) + _rl_keyseq_cxt *cxt; +#endif + + if (META_CHAR (key) && _rl_convert_meta_chars_to_ascii) + { + if (map[ESC].type == ISKMAP) + { + if (RL_ISSTATE (RL_STATE_MACRODEF)) + _rl_add_macro_char (ESC); + RESIZE_KEYSEQ_BUFFER (); + rl_executing_keyseq[rl_key_sequence_length++] = ESC; + map = FUNCTION_TO_KEYMAP (map, ESC); + key = UNMETA (key); + return (_rl_dispatch (key, map)); + } + else + rl_ding (); + return 0; + } + + if (RL_ISSTATE (RL_STATE_MACRODEF)) + _rl_add_macro_char (key); + + r = 0; + switch (map[key].type) + { + case ISFUNC: + func = map[key].function; + if (func) + { + /* Special case rl_do_lowercase_version (). */ + if (func == rl_do_lowercase_version) + /* Should we do anything special if key == ANYOTHERKEY? */ + return (_rl_dispatch (_rl_to_lower ((unsigned char)key), map)); + + rl_executing_keymap = map; + rl_executing_key = key; + + RESIZE_KEYSEQ_BUFFER(); + rl_executing_keyseq[rl_key_sequence_length++] = key; + rl_executing_keyseq[rl_key_sequence_length] = '\0'; + + rl_dispatching = 1; + RL_SETSTATE(RL_STATE_DISPATCHING); + r = (*func) (rl_numeric_arg * rl_arg_sign, key); + RL_UNSETSTATE(RL_STATE_DISPATCHING); + rl_dispatching = 0; + + /* If we have input pending, then the last command was a prefix + command. Don't change the state of rl_last_func. Otherwise, + remember the last command executed in this variable. */ + if (rl_pending_input == 0 && map[key].function != rl_digit_argument) + rl_last_func = map[key].function; + + RL_CHECK_SIGNALS (); + } + else if (map[ANYOTHERKEY].function) + { + /* OK, there's no function bound in this map, but there is a + shadow function that was overridden when the current keymap + was created. Return -2 to note that. */ + if (RL_ISSTATE (RL_STATE_MACROINPUT)) + _rl_prev_macro_key (); + else + _rl_unget_char (key); + return -2; + } + else if (got_subseq) + { + /* Return -1 to note that we're in a subsequence, but we don't + have a matching key, nor was one overridden. This means + we need to back up the recursion chain and find the last + subsequence that is bound to a function. */ + if (RL_ISSTATE (RL_STATE_MACROINPUT)) + _rl_prev_macro_key (); + else + _rl_unget_char (key); + return -1; + } + else + { +#if defined (READLINE_CALLBACKS) + RL_UNSETSTATE (RL_STATE_MULTIKEY); + _rl_keyseq_chain_dispose (); +#endif + _rl_abort_internal (); + return -1; + } + break; + + case ISKMAP: + if (map[key].function != 0) + { +#if defined (VI_MODE) + /* The only way this test will be true is if a subsequence has been + bound starting with ESC, generally the arrow keys. What we do is + check whether there's input in the queue, which there generally + will be if an arrow key has been pressed, and, if there's not, + just dispatch to (what we assume is) rl_vi_movement_mode right + away. This is essentially an input test with a zero timeout (by + default) or a timeout determined by the value of `keyseq-timeout' */ + /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued + takes microseconds, so multiply by 1000 */ + if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap && + (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && + _rl_pushed_input_available () == 0 && + _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0) + return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key))); + /* This is a very specific test. It can possibly be generalized in + the future, but for now it handles a specific case of ESC being + the last character in a keyboard macro. */ + if (rl_editing_mode == vi_mode && key == ESC && map == vi_insertion_keymap && + (RL_ISSTATE (RL_STATE_INPUTPENDING) == 0) && + (RL_ISSTATE (RL_STATE_MACROINPUT) && _rl_peek_macro_key () == 0) && + _rl_pushed_input_available () == 0 && + _rl_input_queued ((_rl_keyseq_timeout > 0) ? _rl_keyseq_timeout*1000 : 0) == 0) + return (_rl_dispatch (ANYOTHERKEY, FUNCTION_TO_KEYMAP (map, key))); +#endif + + RESIZE_KEYSEQ_BUFFER (); + rl_executing_keyseq[rl_key_sequence_length++] = key; + _rl_dispatching_keymap = FUNCTION_TO_KEYMAP (map, key); + + /* Allocate new context here. Use linked contexts (linked through + cxt->ocxt) to simulate recursion */ +#if defined (READLINE_CALLBACKS) +# if defined (VI_MODE) + /* If we're redoing a vi mode command and we know there is a shadowed + function corresponding to this key, just call it -- all the redoable + vi mode commands already have all the input they need, and rl_vi_redo + assumes that one call to rl_dispatch is sufficient to complete the + command. */ + if (_rl_vi_redoing && RL_ISSTATE (RL_STATE_CALLBACK) && + map[ANYOTHERKEY].function != 0) + return (_rl_subseq_result (-2, map, key, got_subseq)); +# endif + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + /* Return 0 only the first time, to indicate success to + _rl_callback_read_char. The rest of the time, we're called + from _rl_dispatch_callback, so we return -3 to indicate + special handling is necessary. */ + r = RL_ISSTATE (RL_STATE_MULTIKEY) ? -3 : 0; + cxt = _rl_keyseq_cxt_alloc (); + + if (got_subseq) + cxt->flags |= KSEQ_SUBSEQ; + cxt->okey = key; + cxt->oldmap = map; + cxt->dmap = _rl_dispatching_keymap; + cxt->subseq_arg = got_subseq || cxt->dmap[ANYOTHERKEY].function; + + RL_SETSTATE (RL_STATE_MULTIKEY); + _rl_kscxt = cxt; + + return r; /* don't indicate immediate success */ + } +#endif + + /* Tentative inter-character timeout for potential multi-key + sequences? If no input within timeout, abort sequence and + act as if we got non-matching input. */ + /* _rl_keyseq_timeout specified in milliseconds; _rl_input_queued + takes microseconds, so multiply by 1000 */ + if (_rl_keyseq_timeout > 0 && + (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && + _rl_pushed_input_available () == 0 && + _rl_dispatching_keymap[ANYOTHERKEY].function && + _rl_input_queued (_rl_keyseq_timeout*1000) == 0) + return (_rl_subseq_result (-2, map, key, got_subseq)); + + newkey = _rl_subseq_getchar (key); + if (newkey < 0) + { + _rl_abort_internal (); + return -1; + } + + r = _rl_dispatch_subseq (newkey, _rl_dispatching_keymap, got_subseq || map[ANYOTHERKEY].function); + return _rl_subseq_result (r, map, key, got_subseq); + } + else + { + _rl_abort_internal (); /* XXX */ + return -1; + } + break; + + case ISMACR: + if (map[key].function != 0) + { + rl_executing_keyseq[rl_key_sequence_length] = '\0'; + macro = savestring ((char *)map[key].function); + _rl_with_macro_input (macro); + return 0; + } + break; + } + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap && + key != ANYOTHERKEY && + _rl_dispatching_keymap == vi_movement_keymap && + _rl_vi_textmod_command (key)) + _rl_vi_set_last (key, rl_numeric_arg, rl_arg_sign); +#endif + + return (r); +} + +static int +_rl_subseq_result (int r, Keymap map, int key, int got_subseq) +{ + Keymap m; + int type, nt; + rl_command_func_t *func, *nf; + + if (r == -2) + /* We didn't match anything, and the keymap we're indexed into + shadowed a function previously bound to that prefix. Call + the function. The recursive call to _rl_dispatch_subseq has + already taken care of pushing any necessary input back onto + the input queue with _rl_unget_char. */ + { + m = _rl_dispatching_keymap; + type = m[ANYOTHERKEY].type; + func = m[ANYOTHERKEY].function; + if (type == ISFUNC && func == rl_do_lowercase_version) + r = _rl_dispatch (_rl_to_lower ((unsigned char)key), map); + else if (type == ISFUNC) + { + /* If we shadowed a function, whatever it is, we somehow need a + keymap with map[key].func == shadowed-function. + Let's use this one. Then we can dispatch using the original + key, since there are commands (e.g., in vi mode) for which it + matters. */ + nt = m[key].type; + nf = m[key].function; + + m[key].type = type; + m[key].function = func; + /* Don't change _rl_dispatching_keymap, set it here */ + _rl_dispatching_keymap = map; /* previous map */ + r = _rl_dispatch_subseq (key, m, 0); + m[key].type = nt; + m[key].function = nf; + } + else + /* We probably shadowed a keymap, so keep going. */ + r = _rl_dispatch (ANYOTHERKEY, m); + } + else if (r < 0 && map[ANYOTHERKEY].function) + { + /* We didn't match (r is probably -1), so return something to + tell the caller that it should try ANYOTHERKEY for an + overridden function. */ + if (RL_ISSTATE (RL_STATE_MACROINPUT)) + _rl_prev_macro_key (); + else + _rl_unget_char (key); + _rl_dispatching_keymap = map; + return -2; + } + else if (r < 0 && got_subseq) /* XXX */ + { + /* OK, back up the chain. */ + if (RL_ISSTATE (RL_STATE_MACROINPUT)) + _rl_prev_macro_key (); + else + _rl_unget_char (key); + _rl_dispatching_keymap = map; + return -1; + } + + return r; +} + +/* **************************************************************** */ +/* */ +/* Initializations */ +/* */ +/* **************************************************************** */ + +/* Initialize readline (and terminal if not already). */ +int +rl_initialize (void) +{ + /* If we have never been called before, initialize the + terminal and data structures. */ + if (rl_initialized == 0) + { + RL_SETSTATE(RL_STATE_INITIALIZING); + readline_initialize_everything (); + RL_UNSETSTATE(RL_STATE_INITIALIZING); + rl_initialized++; + RL_SETSTATE(RL_STATE_INITIALIZED); + } + else + (void)_rl_init_locale (); /* check current locale */ + + /* Initialize the current line information. */ + _rl_init_line_state (); + + /* We aren't done yet. We haven't even gotten started yet! */ + rl_done = 0; + RL_UNSETSTATE(RL_STATE_DONE); + + /* Tell the history routines what is going on. */ + _rl_start_using_history (); + + /* Make the display buffer match the state of the line. */ + rl_reset_line_state (); + + /* No such function typed yet. */ + rl_last_func = (rl_command_func_t *)NULL; + + /* Parsing of key-bindings begins in an enabled state. */ + _rl_parsing_conditionalized_out = 0; + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + _rl_vi_initialize_line (); +#endif + + /* Each line starts in insert mode (the default). */ + _rl_set_insert_mode (RL_IM_DEFAULT, 1); + + return 0; +} + +#if 0 +#if defined (__EMX__) +static void +_emx_build_environ (void) +{ + TIB *tibp; + PIB *pibp; + char *t, **tp; + int c; + + DosGetInfoBlocks (&tibp, &pibp); + t = pibp->pib_pchenv; + for (c = 1; *t; c++) + t += strlen (t) + 1; + tp = environ = (char **)xmalloc ((c + 1) * sizeof (char *)); + t = pibp->pib_pchenv; + while (*t) + { + *tp++ = t; + t += strlen (t) + 1; + } + *tp = 0; +} +#endif /* __EMX__ */ +#endif + +/* Initialize the entire state of the world. */ +static void +readline_initialize_everything (void) +{ +#if 0 +#if defined (__EMX__) + if (environ == 0) + _emx_build_environ (); +#endif +#endif + +#if 0 + /* Find out if we are running in Emacs -- UNUSED. */ + running_in_emacs = sh_get_env_value ("EMACS") != (char *)0; +#endif + + /* Set up input and output if they are not already set up. */ + if (!rl_instream) + rl_instream = stdin; + + if (!rl_outstream) + rl_outstream = stdout; + + /* Bind _rl_in_stream and _rl_out_stream immediately. These values + may change, but they may also be used before readline_internal () + is called. */ + _rl_in_stream = rl_instream; + _rl_out_stream = rl_outstream; + + /* Allocate data structures. */ + if (rl_line_buffer == 0) + rl_line_buffer = (char *)xmalloc (rl_line_buffer_len = DEFAULT_BUFFER_SIZE); + + /* Initialize the terminal interface. */ + if (rl_terminal_name == 0) + rl_terminal_name = sh_get_env_value ("TERM"); + _rl_init_terminal_io (rl_terminal_name); + + /* Bind tty characters to readline functions. */ + readline_default_bindings (); + + /* Initialize the function names. */ + rl_initialize_funmap (); + + /* Decide whether we should automatically go into eight-bit mode. */ + _rl_init_eightbit (); + + /* Read in the init file. */ + rl_read_init_file ((char *)NULL); + + /* XXX */ + if (_rl_horizontal_scroll_mode && _rl_term_autowrap) + { + _rl_screenwidth--; + _rl_screenchars -= _rl_screenheight; + } + + /* Override the effect of any `set keymap' assignments in the + inputrc file. */ + rl_set_keymap_from_edit_mode (); + + /* Try to bind a common arrow key prefix, if not already bound. */ + bind_arrow_keys (); + + /* Bind the bracketed paste prefix assuming that the user will enable + it on terminals that support it. */ + bind_bracketed_paste_prefix (); + + /* If the completion parser's default word break characters haven't + been set yet, then do so now. */ + if (rl_completer_word_break_characters == (char *)NULL) + rl_completer_word_break_characters = (char *)rl_basic_word_break_characters; + +#if defined (COLOR_SUPPORT) + if (_rl_colored_stats || _rl_colored_completion_prefix) + _rl_parse_colors (); +#endif + + rl_executing_keyseq = malloc (_rl_executing_keyseq_size = 16); + if (rl_executing_keyseq) + rl_executing_keyseq[0] = '\0'; +} + +/* If this system allows us to look at the values of the regular + input editing characters, then bind them to their readline + equivalents, iff the characters are not bound to keymaps. */ +static void +readline_default_bindings (void) +{ + if (_rl_bind_stty_chars) + rl_tty_set_default_bindings (_rl_keymap); +} + +/* Reset the default bindings for the terminal special characters we're + interested in back to rl_insert and read the new ones. */ +static void +reset_default_bindings (void) +{ + if (_rl_bind_stty_chars) + { + rl_tty_unset_default_bindings (_rl_keymap); + rl_tty_set_default_bindings (_rl_keymap); + } +} + +/* Bind some common arrow key sequences in MAP. */ +static void +bind_arrow_keys_internal (Keymap map) +{ + Keymap xkeymap; + + xkeymap = _rl_keymap; + _rl_keymap = map; + +#if defined (__MSDOS__) + rl_bind_keyseq_if_unbound ("\033[0A", rl_get_previous_history); + rl_bind_keyseq_if_unbound ("\033[0B", rl_backward_char); + rl_bind_keyseq_if_unbound ("\033[0C", rl_forward_char); + rl_bind_keyseq_if_unbound ("\033[0D", rl_get_next_history); +#endif + + rl_bind_keyseq_if_unbound ("\033[A", rl_get_previous_history); + rl_bind_keyseq_if_unbound ("\033[B", rl_get_next_history); + rl_bind_keyseq_if_unbound ("\033[C", rl_forward_char); + rl_bind_keyseq_if_unbound ("\033[D", rl_backward_char); + rl_bind_keyseq_if_unbound ("\033[H", rl_beg_of_line); + rl_bind_keyseq_if_unbound ("\033[F", rl_end_of_line); + + rl_bind_keyseq_if_unbound ("\033OA", rl_get_previous_history); + rl_bind_keyseq_if_unbound ("\033OB", rl_get_next_history); + rl_bind_keyseq_if_unbound ("\033OC", rl_forward_char); + rl_bind_keyseq_if_unbound ("\033OD", rl_backward_char); + rl_bind_keyseq_if_unbound ("\033OH", rl_beg_of_line); + rl_bind_keyseq_if_unbound ("\033OF", rl_end_of_line); + + /* Key bindings for control-arrow keys */ + rl_bind_keyseq_if_unbound ("\033[1;5C", rl_forward_word); + rl_bind_keyseq_if_unbound ("\033[1;5D", rl_backward_word); + rl_bind_keyseq_if_unbound ("\033[3;5~", rl_kill_word); + + /* Key bindings for alt-arrow keys */ + rl_bind_keyseq_if_unbound ("\033[1;3C", rl_forward_word); + rl_bind_keyseq_if_unbound ("\033[1;3D", rl_backward_word); + +#if defined (__MINGW32__) + rl_bind_keyseq_if_unbound ("\340H", rl_get_previous_history); + rl_bind_keyseq_if_unbound ("\340P", rl_get_next_history); + rl_bind_keyseq_if_unbound ("\340M", rl_forward_char); + rl_bind_keyseq_if_unbound ("\340K", rl_backward_char); + rl_bind_keyseq_if_unbound ("\340G", rl_beg_of_line); + rl_bind_keyseq_if_unbound ("\340O", rl_end_of_line); + rl_bind_keyseq_if_unbound ("\340S", rl_delete); + rl_bind_keyseq_if_unbound ("\340R", rl_overwrite_mode); + + /* These may or may not work because of the embedded NUL. */ + rl_bind_keyseq_if_unbound ("\\000H", rl_get_previous_history); + rl_bind_keyseq_if_unbound ("\\000P", rl_get_next_history); + rl_bind_keyseq_if_unbound ("\\000M", rl_forward_char); + rl_bind_keyseq_if_unbound ("\\000K", rl_backward_char); + rl_bind_keyseq_if_unbound ("\\000G", rl_beg_of_line); + rl_bind_keyseq_if_unbound ("\\000O", rl_end_of_line); + rl_bind_keyseq_if_unbound ("\\000S", rl_delete); + rl_bind_keyseq_if_unbound ("\\000R", rl_overwrite_mode); +#endif + + _rl_keymap = xkeymap; +} + +/* Try and bind the common arrow key prefixes after giving termcap and + the inputrc file a chance to bind them and create `real' keymaps + for the arrow key prefix. */ +static void +bind_arrow_keys (void) +{ + bind_arrow_keys_internal (emacs_standard_keymap); + +#if defined (VI_MODE) + bind_arrow_keys_internal (vi_movement_keymap); + /* Unbind vi_movement_keymap[ESC] to allow users to repeatedly hit ESC + in vi command mode while still allowing the arrow keys to work. */ + if (vi_movement_keymap[ESC].type == ISKMAP) + rl_bind_keyseq_in_map ("\033", (rl_command_func_t *)NULL, vi_movement_keymap); + bind_arrow_keys_internal (vi_insertion_keymap); +#endif +} + +static void +bind_bracketed_paste_prefix (void) +{ + Keymap xkeymap; + + xkeymap = _rl_keymap; + + _rl_keymap = emacs_standard_keymap; + rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin); + + _rl_keymap = vi_insertion_keymap; + rl_bind_keyseq_if_unbound (BRACK_PASTE_PREF, rl_bracketed_paste_begin); + + _rl_keymap = xkeymap; +} + +/* **************************************************************** */ +/* */ +/* Saving and Restoring Readline's state */ +/* */ +/* **************************************************************** */ + +int +rl_save_state (struct readline_state *sp) +{ + if (sp == 0) + return -1; + + sp->point = rl_point; + sp->end = rl_end; + sp->mark = rl_mark; + sp->buffer = rl_line_buffer; + sp->buflen = rl_line_buffer_len; + sp->ul = rl_undo_list; + sp->prompt = rl_prompt; + + sp->rlstate = rl_readline_state; + sp->done = rl_done; + sp->kmap = _rl_keymap; + + sp->lastfunc = rl_last_func; + sp->insmode = rl_insert_mode; + sp->edmode = rl_editing_mode; + sp->kseq = rl_executing_keyseq; + sp->kseqlen = rl_key_sequence_length; + sp->inf = rl_instream; + sp->outf = rl_outstream; + sp->pendingin = rl_pending_input; + sp->macro = rl_executing_macro; + + sp->catchsigs = rl_catch_signals; + sp->catchsigwinch = rl_catch_sigwinch; + + sp->entryfunc = rl_completion_entry_function; + sp->menuentryfunc = rl_menu_completion_entry_function; + sp->ignorefunc = rl_ignore_some_completions_function; + sp->attemptfunc = rl_attempted_completion_function; + sp->wordbreakchars = rl_completer_word_break_characters; + + return (0); +} + +int +rl_restore_state (struct readline_state *sp) +{ + if (sp == 0) + return -1; + + rl_point = sp->point; + rl_end = sp->end; + rl_mark = sp->mark; + the_line = rl_line_buffer = sp->buffer; + rl_line_buffer_len = sp->buflen; + rl_undo_list = sp->ul; + rl_prompt = sp->prompt; + + rl_readline_state = sp->rlstate; + rl_done = sp->done; + _rl_keymap = sp->kmap; + + rl_last_func = sp->lastfunc; + rl_insert_mode = sp->insmode; + rl_editing_mode = sp->edmode; + rl_executing_keyseq = sp->kseq; + rl_key_sequence_length = sp->kseqlen; + rl_instream = sp->inf; + rl_outstream = sp->outf; + rl_pending_input = sp->pendingin; + rl_executing_macro = sp->macro; + + rl_catch_signals = sp->catchsigs; + rl_catch_sigwinch = sp->catchsigwinch; + + rl_completion_entry_function = sp->entryfunc; + rl_menu_completion_entry_function = sp->menuentryfunc; + rl_ignore_some_completions_function = sp->ignorefunc; + rl_attempted_completion_function = sp->attemptfunc; + rl_completer_word_break_characters = sp->wordbreakchars; + + return (0); +} diff --git a/readline/readline/readline.h b/readline/readline/readline.h new file mode 100644 index 0000000000..da782716af --- /dev/null +++ b/readline/readline/readline.h @@ -0,0 +1,959 @@ +/* Readline.h -- the names of functions callable from within readline. */ + +/* Copyright (C) 1987-2016 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_READLINE_H_) +#define _READLINE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +#if defined (READLINE_LIBRARY) +# include "rlstdc.h" +# include "rltypedefs.h" +# include "keymaps.h" +# include "tilde.h" +#else +# include +# include +# include +# include +#endif + +/* Hex-encoded Readline version number. */ +#define RL_READLINE_VERSION 0x0800 /* Readline 8.0 */ +#define RL_VERSION_MAJOR 8 +#define RL_VERSION_MINOR 0 + +/* Readline data structures. */ + +/* Maintaining the state of undo. We remember individual deletes and inserts + on a chain of things to do. */ + +/* The actions that undo knows how to undo. Notice that UNDO_DELETE means + to insert some text, and UNDO_INSERT means to delete some text. I.e., + the code tells undo what to undo, not how to undo it. */ +enum undo_code { UNDO_DELETE, UNDO_INSERT, UNDO_BEGIN, UNDO_END }; + +/* What an element of THE_UNDO_LIST looks like. */ +typedef struct undo_list { + struct undo_list *next; + int start, end; /* Where the change took place. */ + char *text; /* The text to insert, if undoing a delete. */ + enum undo_code what; /* Delete, Insert, Begin, End. */ +} UNDO_LIST; + +/* The current undo list for RL_LINE_BUFFER. */ +extern UNDO_LIST *rl_undo_list; + +/* The data structure for mapping textual names to code addresses. */ +typedef struct _funmap { + const char *name; + rl_command_func_t *function; +} FUNMAP; + +extern FUNMAP **funmap; + +/* **************************************************************** */ +/* */ +/* Functions available to bind to key sequences */ +/* */ +/* **************************************************************** */ + +/* Bindable commands for numeric arguments. */ +extern int rl_digit_argument PARAMS((int, int)); +extern int rl_universal_argument PARAMS((int, int)); + +/* Bindable commands for moving the cursor. */ +extern int rl_forward_byte PARAMS((int, int)); +extern int rl_forward_char PARAMS((int, int)); +extern int rl_forward PARAMS((int, int)); +extern int rl_backward_byte PARAMS((int, int)); +extern int rl_backward_char PARAMS((int, int)); +extern int rl_backward PARAMS((int, int)); +extern int rl_beg_of_line PARAMS((int, int)); +extern int rl_end_of_line PARAMS((int, int)); +extern int rl_forward_word PARAMS((int, int)); +extern int rl_backward_word PARAMS((int, int)); +extern int rl_refresh_line PARAMS((int, int)); +extern int rl_clear_screen PARAMS((int, int)); +extern int rl_skip_csi_sequence PARAMS((int, int)); +extern int rl_arrow_keys PARAMS((int, int)); + +extern int rl_previous_screen_line PARAMS((int, int)); +extern int rl_next_screen_line PARAMS((int, int)); + +/* Bindable commands for inserting and deleting text. */ +extern int rl_insert PARAMS((int, int)); +extern int rl_quoted_insert PARAMS((int, int)); +extern int rl_tab_insert PARAMS((int, int)); +extern int rl_newline PARAMS((int, int)); +extern int rl_do_lowercase_version PARAMS((int, int)); +extern int rl_rubout PARAMS((int, int)); +extern int rl_delete PARAMS((int, int)); +extern int rl_rubout_or_delete PARAMS((int, int)); +extern int rl_delete_horizontal_space PARAMS((int, int)); +extern int rl_delete_or_show_completions PARAMS((int, int)); +extern int rl_insert_comment PARAMS((int, int)); + +/* Bindable commands for changing case. */ +extern int rl_upcase_word PARAMS((int, int)); +extern int rl_downcase_word PARAMS((int, int)); +extern int rl_capitalize_word PARAMS((int, int)); + +/* Bindable commands for transposing characters and words. */ +extern int rl_transpose_words PARAMS((int, int)); +extern int rl_transpose_chars PARAMS((int, int)); + +/* Bindable commands for searching within a line. */ +extern int rl_char_search PARAMS((int, int)); +extern int rl_backward_char_search PARAMS((int, int)); + +/* Bindable commands for readline's interface to the command history. */ +extern int rl_beginning_of_history PARAMS((int, int)); +extern int rl_end_of_history PARAMS((int, int)); +extern int rl_get_next_history PARAMS((int, int)); +extern int rl_get_previous_history PARAMS((int, int)); + +/* Bindable commands for managing the mark and region. */ +extern int rl_set_mark PARAMS((int, int)); +extern int rl_exchange_point_and_mark PARAMS((int, int)); + +/* Bindable commands to set the editing mode (emacs or vi). */ +extern int rl_vi_editing_mode PARAMS((int, int)); +extern int rl_emacs_editing_mode PARAMS((int, int)); + +/* Bindable commands to change the insert mode (insert or overwrite) */ +extern int rl_overwrite_mode PARAMS((int, int)); + +/* Bindable commands for managing key bindings. */ +extern int rl_re_read_init_file PARAMS((int, int)); +extern int rl_dump_functions PARAMS((int, int)); +extern int rl_dump_macros PARAMS((int, int)); +extern int rl_dump_variables PARAMS((int, int)); + +/* Bindable commands for word completion. */ +extern int rl_complete PARAMS((int, int)); +extern int rl_possible_completions PARAMS((int, int)); +extern int rl_insert_completions PARAMS((int, int)); +extern int rl_old_menu_complete PARAMS((int, int)); +extern int rl_menu_complete PARAMS((int, int)); +extern int rl_backward_menu_complete PARAMS((int, int)); + +/* Bindable commands for killing and yanking text, and managing the kill ring. */ +extern int rl_kill_word PARAMS((int, int)); +extern int rl_backward_kill_word PARAMS((int, int)); +extern int rl_kill_line PARAMS((int, int)); +extern int rl_backward_kill_line PARAMS((int, int)); +extern int rl_kill_full_line PARAMS((int, int)); +extern int rl_unix_word_rubout PARAMS((int, int)); +extern int rl_unix_filename_rubout PARAMS((int, int)); +extern int rl_unix_line_discard PARAMS((int, int)); +extern int rl_copy_region_to_kill PARAMS((int, int)); +extern int rl_kill_region PARAMS((int, int)); +extern int rl_copy_forward_word PARAMS((int, int)); +extern int rl_copy_backward_word PARAMS((int, int)); +extern int rl_yank PARAMS((int, int)); +extern int rl_yank_pop PARAMS((int, int)); +extern int rl_yank_nth_arg PARAMS((int, int)); +extern int rl_yank_last_arg PARAMS((int, int)); +extern int rl_bracketed_paste_begin PARAMS((int, int)); +/* Not available unless _WIN32 is defined. */ +#if defined (_WIN32) +extern int rl_paste_from_clipboard PARAMS((int, int)); +#endif + +/* Bindable commands for incremental searching. */ +extern int rl_reverse_search_history PARAMS((int, int)); +extern int rl_forward_search_history PARAMS((int, int)); + +/* Bindable keyboard macro commands. */ +extern int rl_start_kbd_macro PARAMS((int, int)); +extern int rl_end_kbd_macro PARAMS((int, int)); +extern int rl_call_last_kbd_macro PARAMS((int, int)); +extern int rl_print_last_kbd_macro PARAMS((int, int)); + +/* Bindable undo commands. */ +extern int rl_revert_line PARAMS((int, int)); +extern int rl_undo_command PARAMS((int, int)); + +/* Bindable tilde expansion commands. */ +extern int rl_tilde_expand PARAMS((int, int)); + +/* Bindable terminal control commands. */ +extern int rl_restart_output PARAMS((int, int)); +extern int rl_stop_output PARAMS((int, int)); + +/* Miscellaneous bindable commands. */ +extern int rl_abort PARAMS((int, int)); +extern int rl_tty_status PARAMS((int, int)); + +/* Bindable commands for incremental and non-incremental history searching. */ +extern int rl_history_search_forward PARAMS((int, int)); +extern int rl_history_search_backward PARAMS((int, int)); +extern int rl_history_substr_search_forward PARAMS((int, int)); +extern int rl_history_substr_search_backward PARAMS((int, int)); +extern int rl_noninc_forward_search PARAMS((int, int)); +extern int rl_noninc_reverse_search PARAMS((int, int)); +extern int rl_noninc_forward_search_again PARAMS((int, int)); +extern int rl_noninc_reverse_search_again PARAMS((int, int)); + +/* Bindable command used when inserting a matching close character. */ +extern int rl_insert_close PARAMS((int, int)); + +/* Not available unless READLINE_CALLBACKS is defined. */ +extern void rl_callback_handler_install PARAMS((const char *, rl_vcpfunc_t *)); +extern void rl_callback_read_char PARAMS((void)); +extern void rl_callback_handler_remove PARAMS((void)); +extern void rl_callback_sigcleanup PARAMS((void)); + +/* Things for vi mode. Not available unless readline is compiled -DVI_MODE. */ +/* VI-mode bindable commands. */ +extern int rl_vi_redo PARAMS((int, int)); +extern int rl_vi_undo PARAMS((int, int)); +extern int rl_vi_yank_arg PARAMS((int, int)); +extern int rl_vi_fetch_history PARAMS((int, int)); +extern int rl_vi_search_again PARAMS((int, int)); +extern int rl_vi_search PARAMS((int, int)); +extern int rl_vi_complete PARAMS((int, int)); +extern int rl_vi_tilde_expand PARAMS((int, int)); +extern int rl_vi_prev_word PARAMS((int, int)); +extern int rl_vi_next_word PARAMS((int, int)); +extern int rl_vi_end_word PARAMS((int, int)); +extern int rl_vi_insert_beg PARAMS((int, int)); +extern int rl_vi_append_mode PARAMS((int, int)); +extern int rl_vi_append_eol PARAMS((int, int)); +extern int rl_vi_eof_maybe PARAMS((int, int)); +extern int rl_vi_insertion_mode PARAMS((int, int)); +extern int rl_vi_insert_mode PARAMS((int, int)); +extern int rl_vi_movement_mode PARAMS((int, int)); +extern int rl_vi_arg_digit PARAMS((int, int)); +extern int rl_vi_change_case PARAMS((int, int)); +extern int rl_vi_put PARAMS((int, int)); +extern int rl_vi_column PARAMS((int, int)); +extern int rl_vi_delete_to PARAMS((int, int)); +extern int rl_vi_change_to PARAMS((int, int)); +extern int rl_vi_yank_to PARAMS((int, int)); +extern int rl_vi_yank_pop PARAMS((int, int)); +extern int rl_vi_rubout PARAMS((int, int)); +extern int rl_vi_delete PARAMS((int, int)); +extern int rl_vi_back_to_indent PARAMS((int, int)); +extern int rl_vi_unix_word_rubout PARAMS((int, int)); +extern int rl_vi_first_print PARAMS((int, int)); +extern int rl_vi_char_search PARAMS((int, int)); +extern int rl_vi_match PARAMS((int, int)); +extern int rl_vi_change_char PARAMS((int, int)); +extern int rl_vi_subst PARAMS((int, int)); +extern int rl_vi_overstrike PARAMS((int, int)); +extern int rl_vi_overstrike_delete PARAMS((int, int)); +extern int rl_vi_replace PARAMS((int, int)); +extern int rl_vi_set_mark PARAMS((int, int)); +extern int rl_vi_goto_mark PARAMS((int, int)); + +/* VI-mode utility functions. */ +extern int rl_vi_check PARAMS((void)); +extern int rl_vi_domove PARAMS((int, int *)); +extern int rl_vi_bracktype PARAMS((int)); + +extern void rl_vi_start_inserting PARAMS((int, int, int)); + +/* VI-mode pseudo-bindable commands, used as utility functions. */ +extern int rl_vi_fWord PARAMS((int, int)); +extern int rl_vi_bWord PARAMS((int, int)); +extern int rl_vi_eWord PARAMS((int, int)); +extern int rl_vi_fword PARAMS((int, int)); +extern int rl_vi_bword PARAMS((int, int)); +extern int rl_vi_eword PARAMS((int, int)); + +/* **************************************************************** */ +/* */ +/* Well Published Functions */ +/* */ +/* **************************************************************** */ + +/* Readline functions. */ +/* Read a line of input. Prompt with PROMPT. A NULL PROMPT means none. */ +extern char *readline PARAMS((const char *)); + +extern int rl_set_prompt PARAMS((const char *)); +extern int rl_expand_prompt PARAMS((char *)); + +extern int rl_initialize PARAMS((void)); + +/* Undocumented; unused by readline */ +extern int rl_discard_argument PARAMS((void)); + +/* Utility functions to bind keys to readline commands. */ +extern int rl_add_defun PARAMS((const char *, rl_command_func_t *, int)); +extern int rl_bind_key PARAMS((int, rl_command_func_t *)); +extern int rl_bind_key_in_map PARAMS((int, rl_command_func_t *, Keymap)); +extern int rl_unbind_key PARAMS((int)); +extern int rl_unbind_key_in_map PARAMS((int, Keymap)); +extern int rl_bind_key_if_unbound PARAMS((int, rl_command_func_t *)); +extern int rl_bind_key_if_unbound_in_map PARAMS((int, rl_command_func_t *, Keymap)); +extern int rl_unbind_function_in_map PARAMS((rl_command_func_t *, Keymap)); +extern int rl_unbind_command_in_map PARAMS((const char *, Keymap)); +extern int rl_bind_keyseq PARAMS((const char *, rl_command_func_t *)); +extern int rl_bind_keyseq_in_map PARAMS((const char *, rl_command_func_t *, Keymap)); +extern int rl_bind_keyseq_if_unbound PARAMS((const char *, rl_command_func_t *)); +extern int rl_bind_keyseq_if_unbound_in_map PARAMS((const char *, rl_command_func_t *, Keymap)); +extern int rl_generic_bind PARAMS((int, const char *, char *, Keymap)); + +extern char *rl_variable_value PARAMS((const char *)); +extern int rl_variable_bind PARAMS((const char *, const char *)); + +/* Backwards compatibility, use rl_bind_keyseq_in_map instead. */ +extern int rl_set_key PARAMS((const char *, rl_command_func_t *, Keymap)); + +/* Backwards compatibility, use rl_generic_bind instead. */ +extern int rl_macro_bind PARAMS((const char *, const char *, Keymap)); + +/* Undocumented in the texinfo manual; not really useful to programs. */ +extern int rl_translate_keyseq PARAMS((const char *, char *, int *)); +extern char *rl_untranslate_keyseq PARAMS((int)); + +extern rl_command_func_t *rl_named_function PARAMS((const char *)); +extern rl_command_func_t *rl_function_of_keyseq PARAMS((const char *, Keymap, int *)); +extern rl_command_func_t *rl_function_of_keyseq_len PARAMS((const char *, size_t, Keymap, int *)); + +extern void rl_list_funmap_names PARAMS((void)); +extern char **rl_invoking_keyseqs_in_map PARAMS((rl_command_func_t *, Keymap)); +extern char **rl_invoking_keyseqs PARAMS((rl_command_func_t *)); + +extern void rl_function_dumper PARAMS((int)); +extern void rl_macro_dumper PARAMS((int)); +extern void rl_variable_dumper PARAMS((int)); + +extern int rl_read_init_file PARAMS((const char *)); +extern int rl_parse_and_bind PARAMS((char *)); + +/* Functions for manipulating keymaps. */ +extern Keymap rl_make_bare_keymap PARAMS((void)); +extern int rl_empty_keymap PARAMS((Keymap)); +extern Keymap rl_copy_keymap PARAMS((Keymap)); +extern Keymap rl_make_keymap PARAMS((void)); +extern void rl_discard_keymap PARAMS((Keymap)); +extern void rl_free_keymap PARAMS((Keymap)); + +extern Keymap rl_get_keymap_by_name PARAMS((const char *)); +extern char *rl_get_keymap_name PARAMS((Keymap)); +extern void rl_set_keymap PARAMS((Keymap)); +extern Keymap rl_get_keymap PARAMS((void)); + +extern int rl_set_keymap_name PARAMS((const char *, Keymap)); + +/* Undocumented; used internally only. */ +extern void rl_set_keymap_from_edit_mode PARAMS((void)); +extern char *rl_get_keymap_name_from_edit_mode PARAMS((void)); + +/* Functions for manipulating the funmap, which maps command names to functions. */ +extern int rl_add_funmap_entry PARAMS((const char *, rl_command_func_t *)); +extern const char **rl_funmap_names PARAMS((void)); +/* Undocumented, only used internally -- there is only one funmap, and this + function may be called only once. */ +extern void rl_initialize_funmap PARAMS((void)); + +/* Utility functions for managing keyboard macros. */ +extern void rl_push_macro_input PARAMS((char *)); + +/* Functions for undoing, from undo.c */ +extern void rl_add_undo PARAMS((enum undo_code, int, int, char *)); +extern void rl_free_undo_list PARAMS((void)); +extern int rl_do_undo PARAMS((void)); +extern int rl_begin_undo_group PARAMS((void)); +extern int rl_end_undo_group PARAMS((void)); +extern int rl_modifying PARAMS((int, int)); + +/* Functions for redisplay. */ +extern void rl_redisplay PARAMS((void)); +extern int rl_on_new_line PARAMS((void)); +extern int rl_on_new_line_with_prompt PARAMS((void)); +extern int rl_forced_update_display PARAMS((void)); +extern int rl_clear_visible_line PARAMS((void)); +extern int rl_clear_message PARAMS((void)); +extern int rl_reset_line_state PARAMS((void)); +extern int rl_crlf PARAMS((void)); + +#if defined (USE_VARARGS) && defined (PREFER_STDARG) +extern int rl_message (const char *, ...) __attribute__((__format__ (printf, 1, 2))); +#else +extern int rl_message (); +#endif + +extern int rl_show_char PARAMS((int)); + +/* Undocumented in texinfo manual. */ +extern int rl_character_len PARAMS((int, int)); +extern void rl_redraw_prompt_last_line PARAMS((void)); + +/* Save and restore internal prompt redisplay information. */ +extern void rl_save_prompt PARAMS((void)); +extern void rl_restore_prompt PARAMS((void)); + +/* Modifying text. */ +extern void rl_replace_line PARAMS((const char *, int)); +extern int rl_insert_text PARAMS((const char *)); +extern int rl_delete_text PARAMS((int, int)); +extern int rl_kill_text PARAMS((int, int)); +extern char *rl_copy_text PARAMS((int, int)); + +/* Terminal and tty mode management. */ +extern void rl_prep_terminal PARAMS((int)); +extern void rl_deprep_terminal PARAMS((void)); +extern void rl_tty_set_default_bindings PARAMS((Keymap)); +extern void rl_tty_unset_default_bindings PARAMS((Keymap)); + +extern int rl_tty_set_echoing PARAMS((int)); +extern int rl_reset_terminal PARAMS((const char *)); +extern void rl_resize_terminal PARAMS((void)); +extern void rl_set_screen_size PARAMS((int, int)); +extern void rl_get_screen_size PARAMS((int *, int *)); +extern void rl_reset_screen_size PARAMS((void)); + +extern char *rl_get_termcap PARAMS((const char *)); + +/* Functions for character input. */ +extern int rl_stuff_char PARAMS((int)); +extern int rl_execute_next PARAMS((int)); +extern int rl_clear_pending_input PARAMS((void)); +extern int rl_read_key PARAMS((void)); +extern int rl_getc PARAMS((FILE *)); +extern int rl_set_keyboard_input_timeout PARAMS((int)); + +/* `Public' utility functions . */ +extern void rl_extend_line_buffer PARAMS((int)); +extern int rl_ding PARAMS((void)); +extern int rl_alphabetic PARAMS((int)); +extern void rl_free PARAMS((void *)); + +/* Readline signal handling, from signals.c */ +extern int rl_set_signals PARAMS((void)); +extern int rl_clear_signals PARAMS((void)); +extern void rl_cleanup_after_signal PARAMS((void)); +extern void rl_reset_after_signal PARAMS((void)); +extern void rl_free_line_state PARAMS((void)); + +extern int rl_pending_signal PARAMS((void)); +extern void rl_check_signals PARAMS((void)); + +extern void rl_echo_signal_char PARAMS((int)); + +extern int rl_set_paren_blink_timeout PARAMS((int)); + +/* History management functions. */ + +extern void rl_clear_history PARAMS((void)); + +/* Undocumented. */ +extern int rl_maybe_save_line PARAMS((void)); +extern int rl_maybe_unsave_line PARAMS((void)); +extern int rl_maybe_replace_line PARAMS((void)); + +/* Completion functions. */ +extern int rl_complete_internal PARAMS((int)); +extern void rl_display_match_list PARAMS((char **, int, int)); + +extern char **rl_completion_matches PARAMS((const char *, rl_compentry_func_t *)); +extern char *rl_username_completion_function PARAMS((const char *, int)); +extern char *rl_filename_completion_function PARAMS((const char *, int)); + +extern int rl_completion_mode PARAMS((rl_command_func_t *)); + +#if 0 +/* Backwards compatibility (compat.c). These will go away sometime. */ +extern void free_undo_list PARAMS((void)); +extern int maybe_save_line PARAMS((void)); +extern int maybe_unsave_line PARAMS((void)); +extern int maybe_replace_line PARAMS((void)); + +extern int ding PARAMS((void)); +extern int alphabetic PARAMS((int)); +extern int crlf PARAMS((void)); + +extern char **completion_matches PARAMS((char *, rl_compentry_func_t *)); +extern char *username_completion_function PARAMS((const char *, int)); +extern char *filename_completion_function PARAMS((const char *, int)); +#endif + +/* **************************************************************** */ +/* */ +/* Well Published Variables */ +/* */ +/* **************************************************************** */ + +/* The version of this incarnation of the readline library. */ +extern const char *rl_library_version; /* e.g., "4.2" */ +extern int rl_readline_version; /* e.g., 0x0402 */ + +/* True if this is real GNU readline. */ +extern int rl_gnu_readline_p; + +/* Flags word encapsulating the current readline state. */ +extern unsigned long rl_readline_state; + +/* Says which editing mode readline is currently using. 1 means emacs mode; + 0 means vi mode. */ +extern int rl_editing_mode; + +/* Insert or overwrite mode for emacs mode. 1 means insert mode; 0 means + overwrite mode. Reset to insert mode on each input line. */ +extern int rl_insert_mode; + +/* The name of the calling program. You should initialize this to + whatever was in argv[0]. It is used when parsing conditionals. */ +extern const char *rl_readline_name; + +/* The prompt readline uses. This is set from the argument to + readline (), and should not be assigned to directly. */ +extern char *rl_prompt; + +/* The prompt string that is actually displayed by rl_redisplay. Public so + applications can more easily supply their own redisplay functions. */ +extern char *rl_display_prompt; + +/* The line buffer that is in use. */ +extern char *rl_line_buffer; + +/* The location of point, and end. */ +extern int rl_point; +extern int rl_end; + +/* The mark, or saved cursor position. */ +extern int rl_mark; + +/* Flag to indicate that readline has finished with the current input + line and should return it. */ +extern int rl_done; + +/* If set to a character value, that will be the next keystroke read. */ +extern int rl_pending_input; + +/* Non-zero if we called this function from _rl_dispatch(). It's present + so functions can find out whether they were called from a key binding + or directly from an application. */ +extern int rl_dispatching; + +/* Non-zero if the user typed a numeric argument before executing the + current function. */ +extern int rl_explicit_arg; + +/* The current value of the numeric argument specified by the user. */ +extern int rl_numeric_arg; + +/* The address of the last command function Readline executed. */ +extern rl_command_func_t *rl_last_func; + +/* The name of the terminal to use. */ +extern const char *rl_terminal_name; + +/* The input and output streams. */ +extern FILE *rl_instream; +extern FILE *rl_outstream; + +/* If non-zero, Readline gives values of LINES and COLUMNS from the environment + greater precedence than values fetched from the kernel when computing the + screen dimensions. */ +extern int rl_prefer_env_winsize; + +/* If non-zero, then this is the address of a function to call just + before readline_internal () prints the first prompt. */ +extern rl_hook_func_t *rl_startup_hook; + +/* If non-zero, this is the address of a function to call just before + readline_internal_setup () returns and readline_internal starts + reading input characters. */ +extern rl_hook_func_t *rl_pre_input_hook; + +/* The address of a function to call periodically while Readline is + awaiting character input, or NULL, for no event handling. */ +extern rl_hook_func_t *rl_event_hook; + +/* The address of a function to call if a read is interrupted by a signal. */ +extern rl_hook_func_t *rl_signal_event_hook; + +/* The address of a function to call if Readline needs to know whether or not + there is data available from the current input source. */ +extern rl_hook_func_t *rl_input_available_hook; + +/* The address of the function to call to fetch a character from the current + Readline input stream */ +extern rl_getc_func_t *rl_getc_function; + +extern rl_voidfunc_t *rl_redisplay_function; + +extern rl_vintfunc_t *rl_prep_term_function; +extern rl_voidfunc_t *rl_deprep_term_function; + +/* Dispatch variables. */ +extern Keymap rl_executing_keymap; +extern Keymap rl_binding_keymap; + +extern int rl_executing_key; +extern char *rl_executing_keyseq; +extern int rl_key_sequence_length; + +/* Display variables. */ +/* If non-zero, readline will erase the entire line, including any prompt, + if the only thing typed on an otherwise-blank line is something bound to + rl_newline. */ +extern int rl_erase_empty_line; + +/* If non-zero, the application has already printed the prompt (rl_prompt) + before calling readline, so readline should not output it the first time + redisplay is done. */ +extern int rl_already_prompted; + +/* A non-zero value means to read only this many characters rather than + up to a character bound to accept-line. */ +extern int rl_num_chars_to_read; + +/* The text of a currently-executing keyboard macro. */ +extern char *rl_executing_macro; + +/* Variables to control readline signal handling. */ +/* If non-zero, readline will install its own signal handlers for + SIGINT, SIGTERM, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */ +extern int rl_catch_signals; + +/* If non-zero, readline will install a signal handler for SIGWINCH + that also attempts to call any calling application's SIGWINCH signal + handler. Note that the terminal is not cleaned up before the + application's signal handler is called; use rl_cleanup_after_signal() + to do that. */ +extern int rl_catch_sigwinch; + +/* If non-zero, the readline SIGWINCH handler will modify LINES and + COLUMNS in the environment. */ +extern int rl_change_environment; + +/* Completion variables. */ +/* Pointer to the generator function for completion_matches (). + NULL means to use rl_filename_completion_function (), the default + filename completer. */ +extern rl_compentry_func_t *rl_completion_entry_function; + +/* Optional generator for menu completion. Default is + rl_completion_entry_function (rl_filename_completion_function). */ +extern rl_compentry_func_t *rl_menu_completion_entry_function; + +/* If rl_ignore_some_completions_function is non-NULL it is the address + of a function to call after all of the possible matches have been + generated, but before the actual completion is done to the input line. + The function is called with one argument; a NULL terminated array + of (char *). If your function removes any of the elements, they + must be free()'ed. */ +extern rl_compignore_func_t *rl_ignore_some_completions_function; + +/* Pointer to alternative function to create matches. + Function is called with TEXT, START, and END. + START and END are indices in RL_LINE_BUFFER saying what the boundaries + of TEXT are. + If this function exists and returns NULL then call the value of + rl_completion_entry_function to try to match, otherwise use the + array of strings returned. */ +extern rl_completion_func_t *rl_attempted_completion_function; + +/* The basic list of characters that signal a break between words for the + completer routine. The initial contents of this variable is what + breaks words in the shell, i.e. "n\"\\'`@$>". */ +extern const char *rl_basic_word_break_characters; + +/* The list of characters that signal a break between words for + rl_complete_internal. The default list is the contents of + rl_basic_word_break_characters. */ +extern /*const*/ char *rl_completer_word_break_characters; + +/* Hook function to allow an application to set the completion word + break characters before readline breaks up the line. Allows + position-dependent word break characters. */ +extern rl_cpvfunc_t *rl_completion_word_break_hook; + +/* List of characters which can be used to quote a substring of the line. + Completion occurs on the entire substring, and within the substring + rl_completer_word_break_characters are treated as any other character, + unless they also appear within this list. */ +extern const char *rl_completer_quote_characters; + +/* List of quote characters which cause a word break. */ +extern const char *rl_basic_quote_characters; + +/* List of characters that need to be quoted in filenames by the completer. */ +extern const char *rl_filename_quote_characters; + +/* List of characters that are word break characters, but should be left + in TEXT when it is passed to the completion function. The shell uses + this to help determine what kind of completing to do. */ +extern const char *rl_special_prefixes; + +/* If non-zero, then this is the address of a function to call when + completing on a directory name. The function is called with + the address of a string (the current directory name) as an arg. It + changes what is displayed when the possible completions are printed + or inserted. The directory completion hook should perform + any necessary dequoting. This function should return 1 if it modifies + the directory name pointer passed as an argument. If the directory + completion hook returns 0, it should not modify the directory name + pointer passed as an argument. */ +extern rl_icppfunc_t *rl_directory_completion_hook; + +/* If non-zero, this is the address of a function to call when completing + a directory name. This function takes the address of the directory name + to be modified as an argument. Unlike rl_directory_completion_hook, it + only modifies the directory name used in opendir(2), not what is displayed + when the possible completions are printed or inserted. If set, it takes + precedence over rl_directory_completion_hook. The directory rewrite + hook should perform any necessary dequoting. This function has the same + return value properties as the directory_completion_hook. + + I'm not happy with how this works yet, so it's undocumented. I'm trying + it in bash to see how well it goes. */ +extern rl_icppfunc_t *rl_directory_rewrite_hook; + +/* If non-zero, this is the address of a function for the completer to call + before deciding which character to append to a completed name. It should + modify the directory name passed as an argument if appropriate, and return + non-zero if it modifies the name. This should not worry about dequoting + the filename; that has already happened by the time it gets here. */ +extern rl_icppfunc_t *rl_filename_stat_hook; + +/* If non-zero, this is the address of a function to call when reading + directory entries from the filesystem for completion and comparing + them to the partial word to be completed. The function should + either return its first argument (if no conversion takes place) or + newly-allocated memory. This can, for instance, convert filenames + between character sets for comparison against what's typed at the + keyboard. The returned value is what is added to the list of + matches. The second argument is the length of the filename to be + converted. */ +extern rl_dequote_func_t *rl_filename_rewrite_hook; + +/* Backwards compatibility with previous versions of readline. */ +#define rl_symbolic_link_hook rl_directory_completion_hook + +/* If non-zero, then this is the address of a function to call when + completing a word would normally display the list of possible matches. + This function is called instead of actually doing the display. + It takes three arguments: (char **matches, int num_matches, int max_length) + where MATCHES is the array of strings that matched, NUM_MATCHES is the + number of strings in that array, and MAX_LENGTH is the length of the + longest string in that array. */ +extern rl_compdisp_func_t *rl_completion_display_matches_hook; + +/* Non-zero means that the results of the matches are to be treated + as filenames. This is ALWAYS zero on entry, and can only be changed + within a completion entry finder function. */ +extern int rl_filename_completion_desired; + +/* Non-zero means that the results of the matches are to be quoted using + double quotes (or an application-specific quoting mechanism) if the + filename contains any characters in rl_word_break_chars. This is + ALWAYS non-zero on entry, and can only be changed within a completion + entry finder function. */ +extern int rl_filename_quoting_desired; + +/* Set to a function to quote a filename in an application-specific fashion. + Called with the text to quote, the type of match found (single or multiple) + and a pointer to the quoting character to be used, which the function can + reset if desired. */ +extern rl_quote_func_t *rl_filename_quoting_function; + +/* Function to call to remove quoting characters from a filename. Called + before completion is attempted, so the embedded quotes do not interfere + with matching names in the file system. */ +extern rl_dequote_func_t *rl_filename_dequoting_function; + +/* Function to call to decide whether or not a word break character is + quoted. If a character is quoted, it does not break words for the + completer. */ +extern rl_linebuf_func_t *rl_char_is_quoted_p; + +/* Non-zero means to suppress normal filename completion after the + user-specified completion function has been called. */ +extern int rl_attempted_completion_over; + +/* Set to a character describing the type of completion being attempted by + rl_complete_internal; available for use by application completion + functions. */ +extern int rl_completion_type; + +/* Set to the last key used to invoke one of the completion functions */ +extern int rl_completion_invoking_key; + +/* Up to this many items will be displayed in response to a + possible-completions call. After that, we ask the user if she + is sure she wants to see them all. The default value is 100. */ +extern int rl_completion_query_items; + +/* Character appended to completed words when at the end of the line. The + default is a space. Nothing is added if this is '\0'. */ +extern int rl_completion_append_character; + +/* If set to non-zero by an application completion function, + rl_completion_append_character will not be appended. */ +extern int rl_completion_suppress_append; + +/* Set to any quote character readline thinks it finds before any application + completion function is called. */ +extern int rl_completion_quote_character; + +/* Set to a non-zero value if readline found quoting anywhere in the word to + be completed; set before any application completion function is called. */ +extern int rl_completion_found_quote; + +/* If non-zero, the completion functions don't append any closing quote. + This is set to 0 by rl_complete_internal and may be changed by an + application-specific completion function. */ +extern int rl_completion_suppress_quote; + +/* If non-zero, readline will sort the completion matches. On by default. */ +extern int rl_sort_completion_matches; + +/* If non-zero, a slash will be appended to completed filenames that are + symbolic links to directory names, subject to the value of the + mark-directories variable (which is user-settable). This exists so + that application completion functions can override the user's preference + (set via the mark-symlinked-directories variable) if appropriate. + It's set to the value of _rl_complete_mark_symlink_dirs in + rl_complete_internal before any application-specific completion + function is called, so without that function doing anything, the user's + preferences are honored. */ +extern int rl_completion_mark_symlink_dirs; + +/* If non-zero, then disallow duplicates in the matches. */ +extern int rl_ignore_completion_duplicates; + +/* If this is non-zero, completion is (temporarily) inhibited, and the + completion character will be inserted as any other. */ +extern int rl_inhibit_completion; + +/* Applications can set this to non-zero to have readline's signal handlers + installed during the entire duration of reading a complete line, as in + readline-6.2. This should be used with care, because it can result in + readline receiving signals and not handling them until it's called again + via rl_callback_read_char, thereby stealing them from the application. + By default, signal handlers are only active while readline is active. */ +extern int rl_persistent_signal_handlers; + +/* Input error; can be returned by (*rl_getc_function) if readline is reading + a top-level command (RL_ISSTATE (RL_STATE_READCMD)). */ +#define READERR (-2) + +/* Definitions available for use by readline clients. */ +#define RL_PROMPT_START_IGNORE '\001' +#define RL_PROMPT_END_IGNORE '\002' + +/* Possible values for do_replace argument to rl_filename_quoting_function, + called by rl_complete_internal. */ +#define NO_MATCH 0 +#define SINGLE_MATCH 1 +#define MULT_MATCH 2 + +/* Possible state values for rl_readline_state */ +#define RL_STATE_NONE 0x000000 /* no state; before first call */ + +#define RL_STATE_INITIALIZING 0x0000001 /* initializing */ +#define RL_STATE_INITIALIZED 0x0000002 /* initialization done */ +#define RL_STATE_TERMPREPPED 0x0000004 /* terminal is prepped */ +#define RL_STATE_READCMD 0x0000008 /* reading a command key */ +#define RL_STATE_METANEXT 0x0000010 /* reading input after ESC */ +#define RL_STATE_DISPATCHING 0x0000020 /* dispatching to a command */ +#define RL_STATE_MOREINPUT 0x0000040 /* reading more input in a command function */ +#define RL_STATE_ISEARCH 0x0000080 /* doing incremental search */ +#define RL_STATE_NSEARCH 0x0000100 /* doing non-inc search */ +#define RL_STATE_SEARCH 0x0000200 /* doing a history search */ +#define RL_STATE_NUMERICARG 0x0000400 /* reading numeric argument */ +#define RL_STATE_MACROINPUT 0x0000800 /* getting input from a macro */ +#define RL_STATE_MACRODEF 0x0001000 /* defining keyboard macro */ +#define RL_STATE_OVERWRITE 0x0002000 /* overwrite mode */ +#define RL_STATE_COMPLETING 0x0004000 /* doing completion */ +#define RL_STATE_SIGHANDLER 0x0008000 /* in readline sighandler */ +#define RL_STATE_UNDOING 0x0010000 /* doing an undo */ +#define RL_STATE_INPUTPENDING 0x0020000 /* rl_execute_next called */ +#define RL_STATE_TTYCSAVED 0x0040000 /* tty special chars saved */ +#define RL_STATE_CALLBACK 0x0080000 /* using the callback interface */ +#define RL_STATE_VIMOTION 0x0100000 /* reading vi motion arg */ +#define RL_STATE_MULTIKEY 0x0200000 /* reading multiple-key command */ +#define RL_STATE_VICMDONCE 0x0400000 /* entered vi command mode at least once */ +#define RL_STATE_CHARSEARCH 0x0800000 /* vi mode char search */ +#define RL_STATE_REDISPLAYING 0x1000000 /* updating terminal display */ + +#define RL_STATE_DONE 0x2000000 /* done; accepted line */ + +#define RL_SETSTATE(x) (rl_readline_state |= (x)) +#define RL_UNSETSTATE(x) (rl_readline_state &= ~(x)) +#define RL_ISSTATE(x) (rl_readline_state & (x)) + +struct readline_state { + /* line state */ + int point; + int end; + int mark; + int buflen; + char *buffer; + UNDO_LIST *ul; + char *prompt; + + /* global state */ + int rlstate; + int done; + Keymap kmap; + + /* input state */ + rl_command_func_t *lastfunc; + int insmode; + int edmode; + char *kseq; + int kseqlen; + + int pendingin; + FILE *inf; + FILE *outf; + char *macro; + + /* signal state */ + int catchsigs; + int catchsigwinch; + + /* search state */ + + /* completion state */ + rl_compentry_func_t *entryfunc; + rl_compentry_func_t *menuentryfunc; + rl_compignore_func_t *ignorefunc; + rl_completion_func_t *attemptfunc; + char *wordbreakchars; + + /* options state */ + + /* hook state */ + + /* reserved for future expansion, so the struct size doesn't change */ + char reserved[64]; +}; + +extern int rl_save_state PARAMS((struct readline_state *)); +extern int rl_restore_state PARAMS((struct readline_state *)); + +#ifdef __cplusplus +} +#endif + +#endif /* _READLINE_H_ */ diff --git a/readline/readline/readline.pc.in b/readline/readline/readline.pc.in new file mode 100644 index 0000000000..a7f2cf3877 --- /dev/null +++ b/readline/readline/readline.pc.in @@ -0,0 +1,12 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: Readline +Description: Gnu Readline library for command line editing +URL: http://tiswww.cwru.edu/php/chet/readline/rltop.html +Version: @LIBVERSION@ +Requires.private: @TERMCAP_PKG_CONFIG_LIB@ +Libs: -L${libdir} -lreadline +Cflags: -I${includedir}/readline diff --git a/readline/readline/rlconf.h b/readline/readline/rlconf.h new file mode 100644 index 0000000000..b6d6a2f128 --- /dev/null +++ b/readline/readline/rlconf.h @@ -0,0 +1,79 @@ +/* rlconf.h -- readline configuration definitions */ + +/* Copyright (C) 1992-2015 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RLCONF_H_) +#define _RLCONF_H_ + +/* Define this if you want the vi-mode editing available. */ +#define VI_MODE + +/* Define this to get an indication of file type when listing completions. */ +#define VISIBLE_STATS + +/* Define this to get support for colors when listing completions and in + other places. */ +#define COLOR_SUPPORT + +/* This definition is needed by readline.c, rltty.c, and signals.c. */ +/* If on, then readline handles signals in a way that doesn't suck. */ +#define HANDLE_SIGNALS + +/* Ugly but working hack for binding prefix meta. */ +#define PREFIX_META_HACK + +/* The next-to-last-ditch effort file name for a user-specific init file. */ +#define DEFAULT_INPUTRC "~/.inputrc" + +/* The ultimate last-ditch filename for an init file -- system-wide. */ +#define SYS_INPUTRC "/etc/inputrc" + +/* If defined, expand tabs to spaces. */ +#define DISPLAY_TABS + +/* If defined, use the terminal escape sequence to move the cursor forward + over a character when updating the line rather than rewriting it. */ +/* #define HACK_TERMCAP_MOTION */ + +/* The string inserted by the `insert comment' command. */ +#define RL_COMMENT_BEGIN_DEFAULT "#" + +/* Define this if you want code that allows readline to be used in an + X `callback' style. */ +#define READLINE_CALLBACKS + +/* Define this if you want the cursor to indicate insert or overwrite mode. */ +/* #define CURSOR_MODE */ + +/* Define this if you want to enable code that talks to the Linux kernel + tty auditing system. */ +/* #define ENABLE_TTY_AUDIT_SUPPORT */ + +/* Defaults for the various editing mode indicators, inserted at the beginning + of the last (maybe only) line of the prompt if show-mode-in-prompt is on */ +#define RL_EMACS_MODESTR_DEFAULT "@" +#define RL_EMACS_MODESTR_DEFLEN 1 + +#define RL_VI_INS_MODESTR_DEFAULT "(ins)" +#define RL_VI_INS_MODESTR_DEFLEN 5 +#define RL_VI_CMD_MODESTR_DEFAULT "(cmd)" +#define RL_VI_CMD_MODESTR_DEFLEN 5 + +#endif /* _RLCONF_H_ */ diff --git a/readline/readline/rldefs.h b/readline/readline/rldefs.h new file mode 100644 index 0000000000..dab1beba1d --- /dev/null +++ b/readline/readline/rldefs.h @@ -0,0 +1,166 @@ +/* rldefs.h -- an attempt to isolate some of the system-specific defines + for readline. This should be included after any files that define + system-specific constants like _POSIX_VERSION or USG. */ + +/* Copyright (C) 1987-2011 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RLDEFS_H_) +#define _RLDEFS_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +#include "rlstdc.h" + +#if defined (STRCOLL_BROKEN) +# undef HAVE_STRCOLL +#endif + +#if defined (_POSIX_VERSION) && !defined (TERMIOS_MISSING) +# define TERMIOS_TTY_DRIVER +#else +# if defined (HAVE_TERMIO_H) +# define TERMIO_TTY_DRIVER +# else +# if !defined (__MINGW32__) +# define NEW_TTY_DRIVER +# else +# define NO_TTY_DRIVER +# endif +# endif +#endif + +/* Posix macro to check file in statbuf for directory-ness. + This requires that be included before this test. */ +#if defined (S_IFDIR) && !defined (S_ISDIR) +# define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) +#endif + +/* Decide which flavor of the header file describing the C library + string functions to include and include it. */ + +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +#if !defined (strchr) && !defined (__STDC__) +extern char *strchr (), *strrchr (); +#endif /* !strchr && !__STDC__ */ + +#if defined (PREFER_STDARG) +# include +#else +# if defined (PREFER_VARARGS) +# include +# endif +#endif + +#if defined (HAVE_STRCASECMP) +#define _rl_stricmp strcasecmp +#define _rl_strnicmp strncasecmp +#else +extern int _rl_stricmp PARAMS((const char *, const char *)); +extern int _rl_strnicmp PARAMS((const char *, const char *, int)); +#endif + +#if defined (HAVE_STRPBRK) && !defined (HAVE_MULTIBYTE) +# define _rl_strpbrk(a,b) strpbrk((a),(b)) +#else +extern char *_rl_strpbrk PARAMS((const char *, const char *)); +#endif + +#if !defined (emacs_mode) +# define no_mode -1 +# define vi_mode 0 +# define emacs_mode 1 +#endif + +#if !defined (RL_IM_INSERT) +# define RL_IM_INSERT 1 +# define RL_IM_OVERWRITE 0 +# +# define RL_IM_DEFAULT RL_IM_INSERT +#endif + +/* If you cast map[key].function to type (Keymap) on a Cray, + the compiler takes the value of map[key].function and + divides it by 4 to convert between pointer types (pointers + to functions and pointers to structs are different sizes). + This is not what is wanted. */ +#if defined (CRAY) +# define FUNCTION_TO_KEYMAP(map, key) (Keymap)((int)map[key].function) +# define KEYMAP_TO_FUNCTION(data) (rl_command_func_t *)((int)(data)) +#else +# define FUNCTION_TO_KEYMAP(map, key) (Keymap)(map[key].function) +# define KEYMAP_TO_FUNCTION(data) (rl_command_func_t *)(data) +#endif + +#ifndef savestring +#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x)) +#endif + +/* Possible values for _rl_bell_preference. */ +#define NO_BELL 0 +#define AUDIBLE_BELL 1 +#define VISIBLE_BELL 2 + +/* Definitions used when searching the line for characters. */ +/* NOTE: it is necessary that opposite directions are inverses */ +#define FTO 1 /* forward to */ +#define BTO -1 /* backward to */ +#define FFIND 2 /* forward find */ +#define BFIND -2 /* backward find */ + +/* Possible values for the found_quote flags word used by the completion + functions. It says what kind of (shell-like) quoting we found anywhere + in the line. */ +#define RL_QF_SINGLE_QUOTE 0x01 +#define RL_QF_DOUBLE_QUOTE 0x02 +#define RL_QF_BACKSLASH 0x04 +#define RL_QF_OTHER_QUOTE 0x08 + +/* Default readline line buffer length. */ +#define DEFAULT_BUFFER_SIZE 256 + +#if !defined (STREQ) +#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) +#define STREQN(a, b, n) (((n) == 0) ? (1) \ + : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) +#endif + +#if !defined (RL_STRLEN) +# define RL_STRLEN(s) (((s) && (s)[0]) ? ((s)[1] ? ((s)[2] ? strlen(s) : 2) : 1) : 0) +#endif + +#if !defined (FREE) +# define FREE(x) if (x) free (x) +#endif + +#if !defined (SWAP) +# define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) +#endif + +/* CONFIGURATION SECTION */ +#include "rlconf.h" + +#endif /* !_RLDEFS_H_ */ diff --git a/readline/readline/rlmbutil.h b/readline/readline/rlmbutil.h new file mode 100644 index 0000000000..6fd03f6a0c --- /dev/null +++ b/readline/readline/rlmbutil.h @@ -0,0 +1,213 @@ +/* rlmbutil.h -- utility functions for multibyte characters. */ + +/* Copyright (C) 2001-2015 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RL_MBUTIL_H_) +#define _RL_MBUTIL_H_ + +#include "rlstdc.h" + +/************************************************/ +/* check multibyte capability for I18N code */ +/************************************************/ + +/* For platforms which support the ISO C amendement 1 functionality we + support user defined character classes. */ + /* Solaris 2.5 has a bug: must be included before . */ +#if defined (HAVE_WCTYPE_H) && defined (HAVE_WCHAR_H) && defined (HAVE_LOCALE_H) +# include +# include +# if defined (HAVE_ISWCTYPE) && \ + defined (HAVE_ISWLOWER) && \ + defined (HAVE_ISWUPPER) && \ + defined (HAVE_MBSRTOWCS) && \ + defined (HAVE_MBRTOWC) && \ + defined (HAVE_MBRLEN) && \ + defined (HAVE_TOWLOWER) && \ + defined (HAVE_TOWUPPER) && \ + defined (HAVE_WCHAR_T) && \ + defined (HAVE_WCWIDTH) + /* system is supposed to support XPG5 */ +# define HANDLE_MULTIBYTE 1 +# endif +#endif + +/* If we don't want multibyte chars even on a system that supports them, let + the configuring user turn multibyte support off. */ +#if defined (NO_MULTIBYTE_SUPPORT) +# undef HANDLE_MULTIBYTE +#endif + +/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ +#if HANDLE_MULTIBYTE && !defined (HAVE_MBSTATE_T) +# define wcsrtombs(dest, src, len, ps) (wcsrtombs) (dest, src, len, 0) +# define mbsrtowcs(dest, src, len, ps) (mbsrtowcs) (dest, src, len, 0) +# define wcrtomb(s, wc, ps) (wcrtomb) (s, wc, 0) +# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) +# define mbrlen(s, n, ps) (mbrlen) (s, n, 0) +# define mbstate_t int +#endif + +/* Make sure MB_LEN_MAX is at least 16 on systems that claim to be able to + handle multibyte chars (some systems define MB_LEN_MAX as 1) */ +#ifdef HANDLE_MULTIBYTE +# include +# if defined(MB_LEN_MAX) && (MB_LEN_MAX < 16) +# undef MB_LEN_MAX +# endif +# if !defined (MB_LEN_MAX) +# define MB_LEN_MAX 16 +# endif +#endif + +/************************************************/ +/* end of multibyte capability checks for I18N */ +/************************************************/ + +/* + * Flags for _rl_find_prev_mbchar and _rl_find_next_mbchar: + * + * MB_FIND_ANY find any multibyte character + * MB_FIND_NONZERO find a non-zero-width multibyte character + */ + +#define MB_FIND_ANY 0x00 +#define MB_FIND_NONZERO 0x01 + +extern int _rl_find_prev_mbchar PARAMS((char *, int, int)); +extern int _rl_find_next_mbchar PARAMS((char *, int, int, int)); + +#ifdef HANDLE_MULTIBYTE + +extern int _rl_compare_chars PARAMS((char *, int, mbstate_t *, char *, int, mbstate_t *)); +extern int _rl_get_char_len PARAMS((char *, mbstate_t *)); +extern int _rl_adjust_point PARAMS((char *, int, mbstate_t *)); + +extern int _rl_read_mbchar PARAMS((char *, int)); +extern int _rl_read_mbstring PARAMS((int, char *, int)); + +extern int _rl_is_mbchar_matched PARAMS((char *, int, int, char *, int)); + +extern wchar_t _rl_char_value PARAMS((char *, int)); +extern int _rl_walphabetic PARAMS((wchar_t)); + +#define _rl_to_wupper(wc) (iswlower (wc) ? towupper (wc) : (wc)) +#define _rl_to_wlower(wc) (iswupper (wc) ? towlower (wc) : (wc)) + +#define MB_NEXTCHAR(b,s,c,f) \ + ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \ + ? _rl_find_next_mbchar ((b), (s), (c), (f)) \ + : ((s) + (c))) +#define MB_PREVCHAR(b,s,f) \ + ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \ + ? _rl_find_prev_mbchar ((b), (s), (f)) \ + : ((s) - 1)) + +#define MB_INVALIDCH(x) ((x) == (size_t)-1 || (x) == (size_t)-2) +#define MB_NULLWCH(x) ((x) == 0) + +/* Try and shortcut the printable ascii characters to cut down the number of + calls to a libc wcwidth() */ +static inline int +_rl_wcwidth (wc) + wchar_t wc; +{ + switch (wc) + { + case ' ': case '!': case '"': case '#': case '%': + case '&': case '\'': case '(': case ')': case '*': + case '+': case ',': case '-': case '.': case '/': + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + case ':': case ';': case '<': case '=': case '>': + case '?': + case 'A': case 'B': case 'C': case 'D': case 'E': + case 'F': case 'G': case 'H': case 'I': case 'J': + case 'K': case 'L': case 'M': case 'N': case 'O': + case 'P': case 'Q': case 'R': case 'S': case 'T': + case 'U': case 'V': case 'W': case 'X': case 'Y': + case 'Z': + case '[': case '\\': case ']': case '^': case '_': + case 'a': case 'b': case 'c': case 'd': case 'e': + case 'f': case 'g': case 'h': case 'i': case 'j': + case 'k': case 'l': case 'm': case 'n': case 'o': + case 'p': case 'q': case 'r': case 's': case 't': + case 'u': case 'v': case 'w': case 'x': case 'y': + case 'z': case '{': case '|': case '}': case '~': + return 1; + default: + return wcwidth (wc); + } +} + +/* Unicode combining characters range from U+0300 to U+036F */ +#define UNICODE_COMBINING_CHAR(x) ((x) >= 768 && (x) <= 879) + +#if defined (WCWIDTH_BROKEN) +# define WCWIDTH(wc) ((_rl_utf8locale && UNICODE_COMBINING_CHAR(wc)) ? 0 : _rl_wcwidth(wc)) +#else +# define WCWIDTH(wc) _rl_wcwidth(wc) +#endif + +#if defined (WCWIDTH_BROKEN) +# define IS_COMBINING_CHAR(x) (WCWIDTH(x) == 0 && iswcntrl(x) == 0) +#else +# define IS_COMBINING_CHAR(x) (WCWIDTH(x) == 0) +#endif + +#define UTF8_SINGLEBYTE(c) (((c) & 0x80) == 0) +#define UTF8_MBFIRSTCHAR(c) (((c) & 0xc0) == 0xc0) +#define UTF8_MBCHAR(c) (((c) & 0xc0) == 0x80) + +#else /* !HANDLE_MULTIBYTE */ + +#undef MB_LEN_MAX +#undef MB_CUR_MAX + +#define MB_LEN_MAX 1 +#define MB_CUR_MAX 1 + +#define _rl_find_prev_mbchar(b, i, f) (((i) == 0) ? (i) : ((i) - 1)) +#define _rl_find_next_mbchar(b, i1, i2, f) ((i1) + (i2)) + +#define _rl_char_value(buf,ind) ((buf)[(ind)]) + +#define _rl_walphabetic(c) (rl_alphabetic (c)) + +#define _rl_to_wupper(c) (_rl_to_upper (c)) +#define _rl_to_wlower(c) (_rl_to_lower (c)) + +#define MB_NEXTCHAR(b,s,c,f) ((s) + (c)) +#define MB_PREVCHAR(b,s,f) ((s) - 1) + +#define MB_INVALIDCH(x) (0) +#define MB_NULLWCH(x) (0) + +#define UTF8_SINGLEBYTE(c) (1) + +#if !defined (HAVE_WCHAR_T) && !defined (wchar_t) +# define wchar_t int +#endif + +#endif /* !HANDLE_MULTIBYTE */ + +extern int rl_byte_oriented; + +#endif /* _RL_MBUTIL_H_ */ diff --git a/readline/readline/rlprivate.h b/readline/readline/rlprivate.h new file mode 100644 index 0000000000..e85e4d8124 --- /dev/null +++ b/readline/readline/rlprivate.h @@ -0,0 +1,573 @@ +/* rlprivate.h -- functions and variables global to the readline library, + but not intended for use by applications. */ + +/* Copyright (C) 1999-2015 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RL_PRIVATE_H_) +#define _RL_PRIVATE_H_ + +#include "rlconf.h" /* for VISIBLE_STATS */ +#include "rlstdc.h" +#include "posixjmp.h" /* defines procenv_t */ +#include "rlmbutil.h" /* for HANDLE_MULTIBYTE */ + +/************************************************************************* + * * + * Convenience definitions * + * * + *************************************************************************/ + +#define EMACS_MODE() (rl_editing_mode == emacs_mode) +#define VI_COMMAND_MODE() (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap) +#define VI_INSERT_MODE() (rl_editing_mode == vi_mode && _rl_keymap == vi_insertion_keymap) + +#define RL_CHECK_SIGNALS() \ + do { \ + if (_rl_caught_signal) _rl_signal_handler (_rl_caught_signal); \ + } while (0) + +#define RL_SIG_RECEIVED() (_rl_caught_signal != 0) +#define RL_SIGINT_RECEIVED() (_rl_caught_signal == SIGINT) +#define RL_SIGWINCH_RECEIVED() (_rl_caught_signal == SIGWINCH) + +#define CUSTOM_REDISPLAY_FUNC() (rl_redisplay_function != rl_redisplay) +#define CUSTOM_INPUT_FUNC() (rl_getc_function != rl_getc) + +/************************************************************************* + * * + * Global structs undocumented in texinfo manual and not in readline.h * + * * + *************************************************************************/ +/* search types */ +#define RL_SEARCH_ISEARCH 0x01 /* incremental search */ +#define RL_SEARCH_NSEARCH 0x02 /* non-incremental search */ +#define RL_SEARCH_CSEARCH 0x04 /* intra-line char search */ + +/* search flags */ +#define SF_REVERSE 0x01 +#define SF_FOUND 0x02 +#define SF_FAILED 0x04 +#define SF_CHGKMAP 0x08 +#define SF_PATTERN 0x10 /* unused so far */ + +typedef struct __rl_search_context +{ + int type; + int sflags; + + char *search_string; + int search_string_index; + int search_string_size; + + char **lines; + char *allocated_line; + int hlen; + int hindex; + + int save_point; + int save_mark; + int save_line; + int last_found_line; + char *prev_line_found; + + UNDO_LIST *save_undo_list; + + Keymap keymap; /* used when dispatching commands in search string */ + Keymap okeymap; /* original keymap */ + + int history_pos; + int direction; + + int prevc; + int lastc; +#if defined (HANDLE_MULTIBYTE) + char mb[MB_LEN_MAX]; + char pmb[MB_LEN_MAX]; +#endif + + char *sline; + int sline_len; + int sline_index; + + char *search_terminators; +} _rl_search_cxt; + +/* Callback data for reading numeric arguments */ +#define NUM_SAWMINUS 0x01 +#define NUM_SAWDIGITS 0x02 +#define NUM_READONE 0x04 + +typedef int _rl_arg_cxt; + +/* A context for reading key sequences longer than a single character when + using the callback interface. */ +#define KSEQ_DISPATCHED 0x01 +#define KSEQ_SUBSEQ 0x02 +#define KSEQ_RECURSIVE 0x04 + +typedef struct __rl_keyseq_context +{ + int flags; + int subseq_arg; + int subseq_retval; /* XXX */ + int okey; + + Keymap dmap; + Keymap oldmap; + + struct __rl_keyseq_context *ocxt; + int childval; +} _rl_keyseq_cxt; + +/* vi-mode commands that use result of motion command to define boundaries */ +#define VIM_DELETE 0x01 +#define VIM_CHANGE 0x02 +#define VIM_YANK 0x04 + +/* various states for vi-mode commands that use motion commands. reflects + RL_READLINE_STATE */ +#define VMSTATE_READ 0x01 +#define VMSTATE_NUMARG 0x02 + +typedef struct __rl_vimotion_context +{ + int op; + int state; + int flags; /* reserved */ + _rl_arg_cxt ncxt; + int numeric_arg; + int start, end; /* rl_point, rl_end */ + int key, motion; /* initial key, motion command */ +} _rl_vimotion_cxt; + +/* fill in more as needed */ +/* `Generic' callback data and functions */ +typedef struct __rl_callback_generic_arg +{ + int count; + int i1, i2; + /* add here as needed */ +} _rl_callback_generic_arg; + +typedef int _rl_callback_func_t PARAMS((_rl_callback_generic_arg *)); + +typedef void _rl_sigcleanup_func_t PARAMS((int, void *)); + +/************************************************************************* + * * + * Global functions undocumented in texinfo manual and not in readline.h * + * * + *************************************************************************/ + +/************************************************************************* + * * + * Global variables undocumented in texinfo manual and not in readline.h * + * * + *************************************************************************/ + +/* complete.c */ +extern int rl_complete_with_tilde_expansion; +#if defined (VISIBLE_STATS) +extern int rl_visible_stats; +#endif /* VISIBLE_STATS */ +#if defined (COLOR_SUPPORT) +extern int _rl_colored_stats; +extern int _rl_colored_completion_prefix; +#endif + +/* readline.c */ +extern int rl_line_buffer_len; +extern int rl_arg_sign; +extern int rl_visible_prompt_length; +extern int rl_byte_oriented; + +/* display.c */ +extern int rl_display_fixed; + +/* parens.c */ +extern int rl_blink_matching_paren; + +/************************************************************************* + * * + * Global functions and variables unused and undocumented * + * * + *************************************************************************/ + +/* kill.c */ +extern int rl_set_retained_kills PARAMS((int)); + +/* terminal.c */ +extern void _rl_set_screen_size PARAMS((int, int)); + +/* undo.c */ +extern int _rl_fix_last_undo_of_type PARAMS((int, int, int)); + +/* util.c */ +extern char *_rl_savestring PARAMS((const char *)); + +/************************************************************************* + * * + * Functions and variables private to the readline library * + * * + *************************************************************************/ + +/* NOTE: Functions and variables prefixed with `_rl_' are + pseudo-global: they are global so they can be shared + between files in the readline library, but are not intended + to be visible to readline callers. */ + +/************************************************************************* + * Undocumented private functions * + *************************************************************************/ + +#if defined(READLINE_CALLBACKS) + +/* readline.c */ +extern void readline_internal_setup PARAMS((void)); +extern char *readline_internal_teardown PARAMS((int)); +extern int readline_internal_char PARAMS((void)); + +extern _rl_keyseq_cxt *_rl_keyseq_cxt_alloc PARAMS((void)); +extern void _rl_keyseq_cxt_dispose PARAMS((_rl_keyseq_cxt *)); +extern void _rl_keyseq_chain_dispose PARAMS((void)); + +extern int _rl_dispatch_callback PARAMS((_rl_keyseq_cxt *)); + +/* callback.c */ +extern _rl_callback_generic_arg *_rl_callback_data_alloc PARAMS((int)); +extern void _rl_callback_data_dispose PARAMS((_rl_callback_generic_arg *)); + +#endif /* READLINE_CALLBACKS */ + +/* bind.c */ +extern char *_rl_untranslate_macro_value PARAMS((char *, int)); + +/* complete.c */ +extern void _rl_reset_completion_state PARAMS((void)); +extern char _rl_find_completion_word PARAMS((int *, int *)); +extern void _rl_free_match_list PARAMS((char **)); + +/* display.c */ +extern char *_rl_strip_prompt PARAMS((char *)); +extern void _rl_reset_prompt PARAMS((void)); +extern void _rl_move_cursor_relative PARAMS((int, const char *)); +extern void _rl_move_vert PARAMS((int)); +extern void _rl_save_prompt PARAMS((void)); +extern void _rl_restore_prompt PARAMS((void)); +extern char *_rl_make_prompt_for_search PARAMS((int)); +extern void _rl_erase_at_end_of_line PARAMS((int)); +extern void _rl_clear_to_eol PARAMS((int)); +extern void _rl_clear_screen PARAMS((void)); +extern void _rl_update_final PARAMS((void)); +extern void _rl_redisplay_after_sigwinch PARAMS((void)); +extern void _rl_clean_up_for_exit PARAMS((void)); +extern void _rl_erase_entire_line PARAMS((void)); +extern int _rl_current_display_line PARAMS((void)); + +/* input.c */ +extern int _rl_any_typein PARAMS((void)); +extern int _rl_input_available PARAMS((void)); +extern int _rl_input_queued PARAMS((int)); +extern void _rl_insert_typein PARAMS((int)); +extern int _rl_unget_char PARAMS((int)); +extern int _rl_pushed_input_available PARAMS((void)); + +/* isearch.c */ +extern _rl_search_cxt *_rl_scxt_alloc PARAMS((int, int)); +extern void _rl_scxt_dispose PARAMS((_rl_search_cxt *, int)); + +extern int _rl_isearch_dispatch PARAMS((_rl_search_cxt *, int)); +extern int _rl_isearch_callback PARAMS((_rl_search_cxt *)); +extern int _rl_isearch_cleanup PARAMS((_rl_search_cxt *, int)); + +extern int _rl_search_getchar PARAMS((_rl_search_cxt *)); + +/* kill.c */ +#define BRACK_PASTE_PREF "\033[200~" +#define BRACK_PASTE_SUFF "\033[201~" + +#define BRACK_PASTE_LAST '~' +#define BRACK_PASTE_SLEN 6 + +#define BRACK_PASTE_INIT "\033[?2004h" +#define BRACK_PASTE_FINI "\033[?2004l\r" + +extern char *_rl_bracketed_text PARAMS((size_t *)); + +/* macro.c */ +extern void _rl_with_macro_input PARAMS((char *)); +extern int _rl_peek_macro_key PARAMS((void)); +extern int _rl_next_macro_key PARAMS((void)); +extern int _rl_prev_macro_key PARAMS((void)); +extern void _rl_push_executing_macro PARAMS((void)); +extern void _rl_pop_executing_macro PARAMS((void)); +extern void _rl_add_macro_char PARAMS((int)); +extern void _rl_kill_kbd_macro PARAMS((void)); + +/* misc.c */ +extern int _rl_arg_overflow PARAMS((void)); +extern void _rl_arg_init PARAMS((void)); +extern int _rl_arg_getchar PARAMS((void)); +extern int _rl_arg_callback PARAMS((_rl_arg_cxt)); +extern void _rl_reset_argument PARAMS((void)); + +extern void _rl_start_using_history PARAMS((void)); +extern int _rl_free_saved_history_line PARAMS((void)); +extern void _rl_set_insert_mode PARAMS((int, int)); + +extern void _rl_revert_all_lines PARAMS((void)); + +/* nls.c */ +extern char *_rl_init_locale PARAMS((void)); +extern int _rl_init_eightbit PARAMS((void)); + +/* parens.c */ +extern void _rl_enable_paren_matching PARAMS((int)); + +/* readline.c */ +extern void _rl_init_line_state PARAMS((void)); +extern void _rl_set_the_line PARAMS((void)); +extern int _rl_dispatch PARAMS((int, Keymap)); +extern int _rl_dispatch_subseq PARAMS((int, Keymap, int)); +extern void _rl_internal_char_cleanup PARAMS((void)); + +/* rltty.c */ +extern int _rl_disable_tty_signals PARAMS((void)); +extern int _rl_restore_tty_signals PARAMS((void)); + +/* search.c */ +extern int _rl_nsearch_callback PARAMS((_rl_search_cxt *)); +extern int _rl_nsearch_cleanup PARAMS((_rl_search_cxt *, int)); + +/* signals.c */ +extern void _rl_signal_handler PARAMS((int)); + +extern void _rl_block_sigint PARAMS((void)); +extern void _rl_release_sigint PARAMS((void)); +extern void _rl_block_sigwinch PARAMS((void)); +extern void _rl_release_sigwinch PARAMS((void)); + +/* terminal.c */ +extern void _rl_get_screen_size PARAMS((int, int)); +extern void _rl_sigwinch_resize_terminal PARAMS((void)); +extern int _rl_init_terminal_io PARAMS((const char *)); +#ifdef _MINIX +extern void _rl_output_character_function PARAMS((int)); +#else +extern int _rl_output_character_function PARAMS((int)); +#endif +extern void _rl_output_some_chars PARAMS((const char *, int)); +extern int _rl_backspace PARAMS((int)); +extern void _rl_enable_meta_key PARAMS((void)); +extern void _rl_disable_meta_key PARAMS((void)); +extern void _rl_control_keypad PARAMS((int)); +extern void _rl_set_cursor PARAMS((int, int)); + +/* text.c */ +extern void _rl_fix_point PARAMS((int)); +extern int _rl_replace_text PARAMS((const char *, int, int)); +extern int _rl_forward_char_internal PARAMS((int)); +extern int _rl_backward_char_internal PARAMS((int)); +extern int _rl_insert_char PARAMS((int, int)); +extern int _rl_overwrite_char PARAMS((int, int)); +extern int _rl_overwrite_rubout PARAMS((int, int)); +extern int _rl_rubout_char PARAMS((int, int)); +#if defined (HANDLE_MULTIBYTE) +extern int _rl_char_search_internal PARAMS((int, int, char *, int)); +#else +extern int _rl_char_search_internal PARAMS((int, int, int)); +#endif +extern int _rl_set_mark_at_pos PARAMS((int)); + +/* undo.c */ +extern UNDO_LIST *_rl_copy_undo_entry PARAMS((UNDO_LIST *)); +extern UNDO_LIST *_rl_copy_undo_list PARAMS((UNDO_LIST *)); +extern void _rl_free_undo_list PARAMS((UNDO_LIST *)); + +/* util.c */ +#if defined (USE_VARARGS) && defined (PREFER_STDARG) +extern void _rl_ttymsg (const char *, ...) __attribute__((__format__ (printf, 1, 2))); +extern void _rl_errmsg (const char *, ...) __attribute__((__format__ (printf, 1, 2))); +extern void _rl_trace (const char *, ...) __attribute__((__format__ (printf, 1, 2))); +#else +extern void _rl_ttymsg (); +extern void _rl_errmsg (); +extern void _rl_trace (); +#endif +extern void _rl_audit_tty PARAMS((char *)); + +extern int _rl_tropen PARAMS((void)); + +extern int _rl_abort_internal PARAMS((void)); +extern int _rl_null_function PARAMS((int, int)); +extern char *_rl_strindex PARAMS((const char *, const char *)); +extern int _rl_qsort_string_compare PARAMS((char **, char **)); +extern int (_rl_uppercase_p) PARAMS((int)); +extern int (_rl_lowercase_p) PARAMS((int)); +extern int (_rl_pure_alphabetic) PARAMS((int)); +extern int (_rl_digit_p) PARAMS((int)); +extern int (_rl_to_lower) PARAMS((int)); +extern int (_rl_to_upper) PARAMS((int)); +extern int (_rl_digit_value) PARAMS((int)); + +/* vi_mode.c */ +extern void _rl_vi_initialize_line PARAMS((void)); +extern void _rl_vi_reset_last PARAMS((void)); +extern void _rl_vi_set_last PARAMS((int, int, int)); +extern int _rl_vi_textmod_command PARAMS((int)); +extern int _rl_vi_motion_command PARAMS((int)); +extern void _rl_vi_done_inserting PARAMS((void)); +extern int _rl_vi_domove_callback PARAMS((_rl_vimotion_cxt *)); +extern int _rl_vi_domove_motion_cleanup PARAMS((int, _rl_vimotion_cxt *)); + +/************************************************************************* + * Undocumented private variables * + *************************************************************************/ + +/* bind.c */ +extern const char * const _rl_possible_control_prefixes[]; +extern const char * const _rl_possible_meta_prefixes[]; + +/* callback.c */ +extern _rl_callback_func_t *_rl_callback_func; +extern _rl_callback_generic_arg *_rl_callback_data; + +/* complete.c */ +extern int _rl_complete_show_all; +extern int _rl_complete_show_unmodified; +extern int _rl_complete_mark_directories; +extern int _rl_complete_mark_symlink_dirs; +extern int _rl_completion_prefix_display_length; +extern int _rl_completion_columns; +extern int _rl_print_completions_horizontally; +extern int _rl_completion_case_fold; +extern int _rl_completion_case_map; +extern int _rl_match_hidden_files; +extern int _rl_page_completions; +extern int _rl_skip_completed_text; +extern int _rl_menu_complete_prefix_first; + +/* display.c */ +extern int _rl_vis_botlin; +extern int _rl_last_c_pos; +extern int _rl_suppress_redisplay; +extern int _rl_want_redisplay; + +extern char *_rl_emacs_mode_str; +extern int _rl_emacs_modestr_len; +extern char *_rl_vi_ins_mode_str; +extern int _rl_vi_ins_modestr_len; +extern char *_rl_vi_cmd_mode_str; +extern int _rl_vi_cmd_modestr_len; + +/* isearch.c */ +extern char *_rl_isearch_terminators; + +extern _rl_search_cxt *_rl_iscxt; + +/* macro.c */ +extern char *_rl_executing_macro; + +/* misc.c */ +extern int _rl_history_preserve_point; +extern int _rl_history_saved_point; + +extern _rl_arg_cxt _rl_argcxt; + +/* nls.c */ +extern int _rl_utf8locale; + +/* readline.c */ +extern int _rl_echoing_p; +extern int _rl_horizontal_scroll_mode; +extern int _rl_mark_modified_lines; +extern int _rl_bell_preference; +extern int _rl_meta_flag; +extern int _rl_convert_meta_chars_to_ascii; +extern int _rl_output_meta_chars; +extern int _rl_bind_stty_chars; +extern int _rl_revert_all_at_newline; +extern int _rl_echo_control_chars; +extern int _rl_show_mode_in_prompt; +extern int _rl_enable_bracketed_paste; +extern char *_rl_comment_begin; +extern unsigned char _rl_parsing_conditionalized_out; +extern Keymap _rl_keymap; +extern FILE *_rl_in_stream; +extern FILE *_rl_out_stream; +extern int _rl_last_command_was_kill; +extern int _rl_eof_char; +extern int _rl_eof_found; +extern procenv_t _rl_top_level; +extern _rl_keyseq_cxt *_rl_kscxt; +extern int _rl_keyseq_timeout; + +extern int _rl_executing_keyseq_size; + +/* search.c */ +extern _rl_search_cxt *_rl_nscxt; + +/* signals.c */ +extern int _rl_interrupt_immediately; +extern int volatile _rl_caught_signal; + +extern _rl_sigcleanup_func_t *_rl_sigcleanup; +extern void *_rl_sigcleanarg; + +extern int _rl_echoctl; + +extern int _rl_intr_char; +extern int _rl_quit_char; +extern int _rl_susp_char; + +/* terminal.c */ +extern int _rl_enable_keypad; +extern int _rl_enable_meta; +extern char *_rl_term_clreol; +extern char *_rl_term_clrpag; +extern char *_rl_term_clrscroll; +extern char *_rl_term_im; +extern char *_rl_term_ic; +extern char *_rl_term_ei; +extern char *_rl_term_DC; +extern char *_rl_term_up; +extern char *_rl_term_dc; +extern char *_rl_term_cr; +extern char *_rl_term_IC; +extern char *_rl_term_forward_char; +extern int _rl_screenheight; +extern int _rl_screenwidth; +extern int _rl_screenchars; +extern int _rl_terminal_can_insert; +extern int _rl_term_autowrap; + +/* text.c */ +extern int _rl_optimize_typeahead; + +/* undo.c */ +extern int _rl_doing_an_undo; +extern int _rl_undo_group_level; + +/* vi_mode.c */ +extern int _rl_vi_last_command; +extern int _rl_vi_redoing; +extern _rl_vimotion_cxt *_rl_vimvcxt; + +#endif /* _RL_PRIVATE_H_ */ diff --git a/readline/readline/rlshell.h b/readline/readline/rlshell.h new file mode 100644 index 0000000000..3e17d8bc7f --- /dev/null +++ b/readline/readline/rlshell.h @@ -0,0 +1,33 @@ +/* rlshell.h -- utility functions normally provided by bash. */ + +/* Copyright (C) 1999-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RL_SHELL_H_) +#define _RL_SHELL_H_ + +#include "rlstdc.h" + +extern char *sh_single_quote PARAMS((char *)); +extern void sh_set_lines_and_columns PARAMS((int, int)); +extern char *sh_get_env_value PARAMS((const char *)); +extern char *sh_get_home_dir PARAMS((void)); +extern int sh_unset_nodelay_mode PARAMS((int)); + +#endif /* _RL_SHELL_H_ */ diff --git a/readline/readline/rlstdc.h b/readline/readline/rlstdc.h new file mode 100644 index 0000000000..2aaa30babf --- /dev/null +++ b/readline/readline/rlstdc.h @@ -0,0 +1,57 @@ +/* stdc.h -- macros to make source compile on both ANSI C and K&R C compilers. */ + +/* Copyright (C) 1993-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RL_STDC_H_) +#define _RL_STDC_H_ + +/* Adapted from BSD /usr/include/sys/cdefs.h. */ + +/* A function can be defined using prototypes and compile on both ANSI C + and traditional C compilers with something like this: + extern char *func PARAMS((char *, char *, int)); */ + +#if !defined (PARAMS) +# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) +# define PARAMS(protos) protos +# else +# define PARAMS(protos) () +# endif +#endif + +#ifndef __attribute__ +# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) +# define __attribute__(x) +# endif +#endif + +/* Moved from config.h.in because readline.h:rl_message depends on these + defines. */ +#if defined (__STDC__) && defined (HAVE_STDARG_H) +# define PREFER_STDARG +# define USE_VARARGS +#else +# if defined (HAVE_VARARGS_H) +# define PREFER_VARARGS +# define USE_VARARGS +# endif +#endif + +#endif /* !_RL_STDC_H_ */ diff --git a/readline/readline/rltty.c b/readline/readline/rltty.c new file mode 100644 index 0000000000..d0cd572713 --- /dev/null +++ b/readline/readline/rltty.c @@ -0,0 +1,991 @@ +/* rltty.c -- functions to prepare and restore the terminal for readline's + use. */ + +/* Copyright (C) 1992-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#include "rldefs.h" + +#include "rltty.h" +#if defined (HAVE_SYS_IOCTL_H) +# include /* include for declaration of ioctl */ +#endif + +#include "readline.h" +#include "rlprivate.h" + +#if !defined (errno) +extern int errno; +#endif /* !errno */ + +rl_vintfunc_t *rl_prep_term_function = rl_prep_terminal; +rl_voidfunc_t *rl_deprep_term_function = rl_deprep_terminal; + +static void set_winsize PARAMS((int)); + +/* **************************************************************** */ +/* */ +/* Saving and Restoring the TTY */ +/* */ +/* **************************************************************** */ + +/* Non-zero means that the terminal is in a prepped state. There are several + flags that are OR'd in to denote whether or not we have sent various + init strings to the terminal. */ +#define TPX_PREPPED 0x01 +#define TPX_BRACKPASTE 0x02 +#define TPX_METAKEY 0x04 + +static int terminal_prepped; + +static _RL_TTY_CHARS _rl_tty_chars, _rl_last_tty_chars; + +/* If non-zero, means that this process has called tcflow(fd, TCOOFF) + and output is suspended. */ +#if defined (__ksr1__) +static int ksrflow; +#endif + +/* Dummy call to force a backgrounded readline to stop before it tries + to get the tty settings. */ +static void +set_winsize (tty) + int tty; +{ +#if defined (TIOCGWINSZ) + struct winsize w; + + if (ioctl (tty, TIOCGWINSZ, &w) == 0) + (void) ioctl (tty, TIOCSWINSZ, &w); +#endif /* TIOCGWINSZ */ +} + +#if defined (NO_TTY_DRIVER) +/* Nothing */ +#elif defined (NEW_TTY_DRIVER) + +/* Values for the `flags' field of a struct bsdtty. This tells which + elements of the struct bsdtty have been fetched from the system and + are valid. */ +#define SGTTY_SET 0x01 +#define LFLAG_SET 0x02 +#define TCHARS_SET 0x04 +#define LTCHARS_SET 0x08 + +struct bsdtty { + struct sgttyb sgttyb; /* Basic BSD tty driver information. */ + int lflag; /* Local mode flags, like LPASS8. */ +#if defined (TIOCGETC) + struct tchars tchars; /* Terminal special characters, including ^S and ^Q. */ +#endif +#if defined (TIOCGLTC) + struct ltchars ltchars; /* 4.2 BSD editing characters */ +#endif + int flags; /* Bitmap saying which parts of the struct are valid. */ +}; + +#define TIOTYPE struct bsdtty + +static TIOTYPE otio; + +static void save_tty_chars PARAMS((TIOTYPE *)); +static int _get_tty_settings PARAMS((int, TIOTYPE *)); +static int get_tty_settings PARAMS((int, TIOTYPE *)); +static int _set_tty_settings PARAMS((int, TIOTYPE *)); +static int set_tty_settings PARAMS((int, TIOTYPE *)); + +static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *)); + +static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *)); + +static void +save_tty_chars (TIOTYPE *tiop) +{ + _rl_last_tty_chars = _rl_tty_chars; + + if (tiop->flags & SGTTY_SET) + { + _rl_tty_chars.t_erase = tiop->sgttyb.sg_erase; + _rl_tty_chars.t_kill = tiop->sgttyb.sg_kill; + } + + if (tiop->flags & TCHARS_SET) + { + _rl_intr_char = _rl_tty_chars.t_intr = tiop->tchars.t_intrc; + _rl_quit_char = _rl_tty_chars.t_quit = tiop->tchars.t_quitc; + + _rl_tty_chars.t_start = tiop->tchars.t_startc; + _rl_tty_chars.t_stop = tiop->tchars.t_stopc; + _rl_tty_chars.t_eof = tiop->tchars.t_eofc; + _rl_tty_chars.t_eol = '\n'; + _rl_tty_chars.t_eol2 = tiop->tchars.t_brkc; + } + + if (tiop->flags & LTCHARS_SET) + { + _rl_susp_char = _rl_tty_chars.t_susp = tiop->ltchars.t_suspc; + + _rl_tty_chars.t_dsusp = tiop->ltchars.t_dsuspc; + _rl_tty_chars.t_reprint = tiop->ltchars.t_rprntc; + _rl_tty_chars.t_flush = tiop->ltchars.t_flushc; + _rl_tty_chars.t_werase = tiop->ltchars.t_werasc; + _rl_tty_chars.t_lnext = tiop->ltchars.t_lnextc; + } + + _rl_tty_chars.t_status = -1; +} + +static int +get_tty_settings (int tty, TIOTYPE *tiop) +{ + set_winsize (tty); + + tiop->flags = tiop->lflag = 0; + + errno = 0; + if (ioctl (tty, TIOCGETP, &(tiop->sgttyb)) < 0) + return -1; + tiop->flags |= SGTTY_SET; + +#if defined (TIOCLGET) + if (ioctl (tty, TIOCLGET, &(tiop->lflag)) == 0) + tiop->flags |= LFLAG_SET; +#endif + +#if defined (TIOCGETC) + if (ioctl (tty, TIOCGETC, &(tiop->tchars)) == 0) + tiop->flags |= TCHARS_SET; +#endif + +#if defined (TIOCGLTC) + if (ioctl (tty, TIOCGLTC, &(tiop->ltchars)) == 0) + tiop->flags |= LTCHARS_SET; +#endif + + return 0; +} + +static int +set_tty_settings (int tty, TIOTYPE *tiop) +{ + if (tiop->flags & SGTTY_SET) + { + ioctl (tty, TIOCSETN, &(tiop->sgttyb)); + tiop->flags &= ~SGTTY_SET; + } + _rl_echoing_p = 1; + +#if defined (TIOCLSET) + if (tiop->flags & LFLAG_SET) + { + ioctl (tty, TIOCLSET, &(tiop->lflag)); + tiop->flags &= ~LFLAG_SET; + } +#endif + +#if defined (TIOCSETC) + if (tiop->flags & TCHARS_SET) + { + ioctl (tty, TIOCSETC, &(tiop->tchars)); + tiop->flags &= ~TCHARS_SET; + } +#endif + +#if defined (TIOCSLTC) + if (tiop->flags & LTCHARS_SET) + { + ioctl (tty, TIOCSLTC, &(tiop->ltchars)); + tiop->flags &= ~LTCHARS_SET; + } +#endif + + return 0; +} + +static void +prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop) +{ + _rl_echoing_p = (oldtio.sgttyb.sg_flags & ECHO); + _rl_echoctl = (oldtio.sgttyb.sg_flags & ECHOCTL); + + /* Copy the original settings to the structure we're going to use for + our settings. */ + tiop->sgttyb = oldtio.sgttyb; + tiop->lflag = oldtio.lflag; +#if defined (TIOCGETC) + tiop->tchars = oldtio.tchars; +#endif +#if defined (TIOCGLTC) + tiop->ltchars = oldtio.ltchars; +#endif + tiop->flags = oldtio.flags; + + /* First, the basic settings to put us into character-at-a-time, no-echo + input mode. */ + tiop->sgttyb.sg_flags &= ~(ECHO | CRMOD); + tiop->sgttyb.sg_flags |= CBREAK; + + /* If this terminal doesn't care how the 8th bit is used, then we can + use it for the meta-key. If only one of even or odd parity is + specified, then the terminal is using parity, and we cannot. */ +#if !defined (ANYP) +# define ANYP (EVENP | ODDP) +#endif + if (((oldtio.sgttyb.sg_flags & ANYP) == ANYP) || + ((oldtio.sgttyb.sg_flags & ANYP) == 0)) + { + tiop->sgttyb.sg_flags |= ANYP; + + /* Hack on local mode flags if we can. */ +#if defined (TIOCLGET) +# if defined (LPASS8) + tiop->lflag |= LPASS8; +# endif /* LPASS8 */ +#endif /* TIOCLGET */ + } + +#if defined (TIOCGETC) +# if defined (USE_XON_XOFF) + /* Get rid of terminal output start and stop characters. */ + tiop->tchars.t_stopc = -1; /* C-s */ + tiop->tchars.t_startc = -1; /* C-q */ + + /* If there is an XON character, bind it to restart the output. */ + if (oldtio.tchars.t_startc != -1) + rl_bind_key (oldtio.tchars.t_startc, rl_restart_output); +# endif /* USE_XON_XOFF */ + + /* If there is an EOF char, bind _rl_eof_char to it. */ + if (oldtio.tchars.t_eofc != -1) + _rl_eof_char = oldtio.tchars.t_eofc; + +# if defined (NO_KILL_INTR) + /* Get rid of terminal-generated SIGQUIT and SIGINT. */ + tiop->tchars.t_quitc = -1; /* C-\ */ + tiop->tchars.t_intrc = -1; /* C-c */ +# endif /* NO_KILL_INTR */ +#endif /* TIOCGETC */ + +#if defined (TIOCGLTC) + /* Make the interrupt keys go away. Just enough to make people happy. */ + tiop->ltchars.t_dsuspc = -1; /* C-y */ + tiop->ltchars.t_lnextc = -1; /* C-v */ +#endif /* TIOCGLTC */ +} + +#else /* !defined (NEW_TTY_DRIVER) */ + +#if !defined (VMIN) +# define VMIN VEOF +#endif + +#if !defined (VTIME) +# define VTIME VEOL +#endif + +#if defined (TERMIOS_TTY_DRIVER) +# define TIOTYPE struct termios +# define DRAIN_OUTPUT(fd) tcdrain (fd) +# define GETATTR(tty, tiop) (tcgetattr (tty, tiop)) +# ifdef M_UNIX +# define SETATTR(tty, tiop) (tcsetattr (tty, TCSANOW, tiop)) +# else +# define SETATTR(tty, tiop) (tcsetattr (tty, TCSADRAIN, tiop)) +# endif /* !M_UNIX */ +#else +# define TIOTYPE struct termio +# define DRAIN_OUTPUT(fd) +# define GETATTR(tty, tiop) (ioctl (tty, TCGETA, tiop)) +# define SETATTR(tty, tiop) (ioctl (tty, TCSETAW, tiop)) +#endif /* !TERMIOS_TTY_DRIVER */ + +static TIOTYPE otio; + +static void save_tty_chars PARAMS((TIOTYPE *)); +static int _get_tty_settings PARAMS((int, TIOTYPE *)); +static int get_tty_settings PARAMS((int, TIOTYPE *)); +static int _set_tty_settings PARAMS((int, TIOTYPE *)); +static int set_tty_settings PARAMS((int, TIOTYPE *)); + +static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *)); + +static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *)); +static void _rl_bind_tty_special_chars PARAMS((Keymap, TIOTYPE)); + +#if defined (FLUSHO) +# define OUTPUT_BEING_FLUSHED(tp) (tp->c_lflag & FLUSHO) +#else +# define OUTPUT_BEING_FLUSHED(tp) 0 +#endif + +static void +save_tty_chars (TIOTYPE *tiop) +{ + _rl_last_tty_chars = _rl_tty_chars; + + _rl_tty_chars.t_eof = tiop->c_cc[VEOF]; + _rl_tty_chars.t_eol = tiop->c_cc[VEOL]; +#ifdef VEOL2 + _rl_tty_chars.t_eol2 = tiop->c_cc[VEOL2]; +#endif + _rl_tty_chars.t_erase = tiop->c_cc[VERASE]; +#ifdef VWERASE + _rl_tty_chars.t_werase = tiop->c_cc[VWERASE]; +#endif + _rl_tty_chars.t_kill = tiop->c_cc[VKILL]; +#ifdef VREPRINT + _rl_tty_chars.t_reprint = tiop->c_cc[VREPRINT]; +#endif + _rl_intr_char = _rl_tty_chars.t_intr = tiop->c_cc[VINTR]; + _rl_quit_char = _rl_tty_chars.t_quit = tiop->c_cc[VQUIT]; +#ifdef VSUSP + _rl_susp_char = _rl_tty_chars.t_susp = tiop->c_cc[VSUSP]; +#endif +#ifdef VDSUSP + _rl_tty_chars.t_dsusp = tiop->c_cc[VDSUSP]; +#endif +#ifdef VSTART + _rl_tty_chars.t_start = tiop->c_cc[VSTART]; +#endif +#ifdef VSTOP + _rl_tty_chars.t_stop = tiop->c_cc[VSTOP]; +#endif +#ifdef VLNEXT + _rl_tty_chars.t_lnext = tiop->c_cc[VLNEXT]; +#endif +#ifdef VDISCARD + _rl_tty_chars.t_flush = tiop->c_cc[VDISCARD]; +#endif +#ifdef VSTATUS + _rl_tty_chars.t_status = tiop->c_cc[VSTATUS]; +#endif +} + +#if defined (_AIX) || defined (_AIX41) +/* Currently this is only used on AIX */ +static void +rltty_warning (char *msg) +{ + _rl_errmsg ("warning: %s", msg); +} +#endif + +#if defined (_AIX) +void +setopost (TIOTYPE *tp) +{ + if ((tp->c_oflag & OPOST) == 0) + { + _rl_errmsg ("warning: turning on OPOST for terminal\r"); + tp->c_oflag |= OPOST|ONLCR; + } +} +#endif + +static int +_get_tty_settings (int tty, TIOTYPE *tiop) +{ + int ioctl_ret; + + while (1) + { + ioctl_ret = GETATTR (tty, tiop); + if (ioctl_ret < 0) + { + if (errno != EINTR) + return -1; + else + continue; + } + if (OUTPUT_BEING_FLUSHED (tiop)) + { +#if defined (FLUSHO) + _rl_errmsg ("warning: turning off output flushing"); + tiop->c_lflag &= ~FLUSHO; + break; +#else + continue; +#endif + } + break; + } + + return 0; +} + +static int +get_tty_settings (int tty, TIOTYPE *tiop) +{ + set_winsize (tty); + + errno = 0; + if (_get_tty_settings (tty, tiop) < 0) + return -1; + +#if defined (_AIX) + setopost(tiop); +#endif + + return 0; +} + +static int +_set_tty_settings (int tty, TIOTYPE *tiop) +{ + while (SETATTR (tty, tiop) < 0) + { + if (errno != EINTR) + return -1; + errno = 0; + } + return 0; +} + +static int +set_tty_settings (int tty, TIOTYPE *tiop) +{ + if (_set_tty_settings (tty, tiop) < 0) + return -1; + +#if 0 + +#if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + if (ksrflow) + { + ksrflow = 0; + tcflow (tty, TCOON); + } +# else /* !ksr1 */ + tcflow (tty, TCOON); /* Simulate a ^Q. */ +# endif /* !ksr1 */ +#else + ioctl (tty, TCXONC, 1); /* Simulate a ^Q. */ +#endif /* !TERMIOS_TTY_DRIVER */ + +#endif /* 0 */ + + return 0; +} + +static void +prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop) +{ + int sc; + Keymap kmap; + + _rl_echoing_p = (oldtio.c_lflag & ECHO); +#if defined (ECHOCTL) + _rl_echoctl = (oldtio.c_lflag & ECHOCTL); +#endif + + tiop->c_lflag &= ~(ICANON | ECHO); + + if ((unsigned char) oldtio.c_cc[VEOF] != (unsigned char) _POSIX_VDISABLE) + _rl_eof_char = oldtio.c_cc[VEOF]; + +#if defined (USE_XON_XOFF) +#if defined (IXANY) + tiop->c_iflag &= ~(IXON | IXANY); +#else + /* `strict' Posix systems do not define IXANY. */ + tiop->c_iflag &= ~IXON; +#endif /* IXANY */ +#endif /* USE_XON_XOFF */ + + /* Only turn this off if we are using all 8 bits. */ + if (((tiop->c_cflag & CSIZE) == CS8) || meta_flag) + tiop->c_iflag &= ~(ISTRIP | INPCK); + + /* Make sure we differentiate between CR and NL on input. */ + tiop->c_iflag &= ~(ICRNL | INLCR); + +#if !defined (HANDLE_SIGNALS) + tiop->c_lflag &= ~ISIG; +#else + tiop->c_lflag |= ISIG; +#endif + + tiop->c_cc[VMIN] = 1; + tiop->c_cc[VTIME] = 0; + +#if defined (FLUSHO) + if (OUTPUT_BEING_FLUSHED (tiop)) + { + tiop->c_lflag &= ~FLUSHO; + oldtio.c_lflag &= ~FLUSHO; + } +#endif + + /* Turn off characters that we need on Posix systems with job control, + just to be sure. This includes ^Y and ^V. This should not really + be necessary. */ +#if defined (TERMIOS_TTY_DRIVER) && defined (_POSIX_VDISABLE) + +#if defined (VLNEXT) + tiop->c_cc[VLNEXT] = _POSIX_VDISABLE; +#endif + +#if defined (VDSUSP) + tiop->c_cc[VDSUSP] = _POSIX_VDISABLE; +#endif + + /* Conditionally disable some other tty special characters if there is a + key binding for them in the current keymap. Readline ordinarily doesn't + bind these characters, but an application or user might. */ +#if defined (VI_MODE) + kmap = (rl_editing_mode == vi_mode) ? vi_insertion_keymap : _rl_keymap; +#else + kmap = _rl_keymap; +#endif +#if defined (VDISCARD) + sc = tiop->c_cc[VDISCARD]; + if (sc != _POSIX_VDISABLE && kmap[(unsigned char)sc].type == ISFUNC) + tiop->c_cc[VDISCARD] = _POSIX_VDISABLE; +#endif /* VDISCARD */ + +#endif /* TERMIOS_TTY_DRIVER && _POSIX_VDISABLE */ +} +#endif /* !NEW_TTY_DRIVER */ + +/* Put the terminal in CBREAK mode so that we can detect key presses. */ +#if defined (NO_TTY_DRIVER) +void +rl_prep_terminal (int meta_flag) +{ + _rl_echoing_p = 1; +} + +void +rl_deprep_terminal (void) +{ +} + +#else /* ! NO_TTY_DRIVER */ +void +rl_prep_terminal (int meta_flag) +{ + int tty, nprep; + TIOTYPE tio; + + if (terminal_prepped) + return; + + /* Try to keep this function from being INTerrupted. */ + _rl_block_sigint (); + + tty = rl_instream ? fileno (rl_instream) : fileno (stdin); + + if (get_tty_settings (tty, &tio) < 0) + { +#if defined (ENOTSUP) + /* MacOS X and Linux, at least, lie about the value of errno if + tcgetattr fails. */ + if (errno == ENOTTY || errno == EINVAL || errno == ENOTSUP) +#else + if (errno == ENOTTY || errno == EINVAL) +#endif + _rl_echoing_p = 1; /* XXX */ + + _rl_release_sigint (); + return; + } + + otio = tio; + + if (_rl_bind_stty_chars) + { +#if defined (VI_MODE) + /* If editing in vi mode, make sure we restore the bindings in the + insertion keymap no matter what keymap we ended up in. */ + if (rl_editing_mode == vi_mode) + rl_tty_unset_default_bindings (vi_insertion_keymap); + else +#endif + rl_tty_unset_default_bindings (_rl_keymap); + } + save_tty_chars (&otio); + RL_SETSTATE(RL_STATE_TTYCSAVED); + if (_rl_bind_stty_chars) + { +#if defined (VI_MODE) + /* If editing in vi mode, make sure we set the bindings in the + insertion keymap no matter what keymap we ended up in. */ + if (rl_editing_mode == vi_mode) + _rl_bind_tty_special_chars (vi_insertion_keymap, tio); + else +#endif + _rl_bind_tty_special_chars (_rl_keymap, tio); + } + + prepare_terminal_settings (meta_flag, otio, &tio); + + if (set_tty_settings (tty, &tio) < 0) + { + _rl_release_sigint (); + return; + } + + if (_rl_enable_keypad) + _rl_control_keypad (1); + + nprep = TPX_PREPPED; + + if (_rl_enable_bracketed_paste) + { + fprintf (rl_outstream, BRACK_PASTE_INIT); + nprep |= TPX_BRACKPASTE; + } + + fflush (rl_outstream); + terminal_prepped = nprep; + RL_SETSTATE(RL_STATE_TERMPREPPED); + + _rl_release_sigint (); +} + +/* Restore the terminal's normal settings and modes. */ +void +rl_deprep_terminal (void) +{ + int tty; + + if (terminal_prepped == 0) + return; + + /* Try to keep this function from being interrupted. */ + _rl_block_sigint (); + + tty = rl_instream ? fileno (rl_instream) : fileno (stdin); + + if (terminal_prepped & TPX_BRACKPASTE) + { + fprintf (rl_outstream, BRACK_PASTE_FINI); + if (_rl_eof_found) + fprintf (rl_outstream, "\n"); + } + + if (_rl_enable_keypad) + _rl_control_keypad (0); + + fflush (rl_outstream); + + if (set_tty_settings (tty, &otio) < 0) + { + _rl_release_sigint (); + return; + } + + terminal_prepped = 0; + RL_UNSETSTATE(RL_STATE_TERMPREPPED); + + _rl_release_sigint (); +} +#endif /* !NO_TTY_DRIVER */ + +/* Set readline's idea of whether or not it is echoing output to the terminal, + returning the old value. */ +int +rl_tty_set_echoing (int u) +{ + int o; + + o = _rl_echoing_p; + _rl_echoing_p = u; + return o; +} + +/* **************************************************************** */ +/* */ +/* Bogus Flow Control */ +/* */ +/* **************************************************************** */ + +int +rl_restart_output (int count, int key) +{ +#if defined (__MINGW32__) + return 0; +#else /* !__MING32__ */ + + int fildes = fileno (rl_outstream); +#if defined (TIOCSTART) +#if defined (apollo) + ioctl (&fildes, TIOCSTART, 0); +#else + ioctl (fildes, TIOCSTART, 0); +#endif /* apollo */ + +#else /* !TIOCSTART */ +# if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + if (ksrflow) + { + ksrflow = 0; + tcflow (fildes, TCOON); + } +# else /* !ksr1 */ + tcflow (fildes, TCOON); /* Simulate a ^Q. */ +# endif /* !ksr1 */ +# else /* !TERMIOS_TTY_DRIVER */ +# if defined (TCXONC) + ioctl (fildes, TCXONC, TCOON); +# endif /* TCXONC */ +# endif /* !TERMIOS_TTY_DRIVER */ +#endif /* !TIOCSTART */ + + return 0; +#endif /* !__MINGW32__ */ +} + +int +rl_stop_output (int count, int key) +{ +#if defined (__MINGW32__) + return 0; +#else + + int fildes = fileno (rl_instream); + +#if defined (TIOCSTOP) +# if defined (apollo) + ioctl (&fildes, TIOCSTOP, 0); +# else + ioctl (fildes, TIOCSTOP, 0); +# endif /* apollo */ +#else /* !TIOCSTOP */ +# if defined (TERMIOS_TTY_DRIVER) +# if defined (__ksr1__) + ksrflow = 1; +# endif /* ksr1 */ + tcflow (fildes, TCOOFF); +# else +# if defined (TCXONC) + ioctl (fildes, TCXONC, TCOON); +# endif /* TCXONC */ +# endif /* !TERMIOS_TTY_DRIVER */ +#endif /* !TIOCSTOP */ + + return 0; +#endif /* !__MINGW32__ */ +} + +/* **************************************************************** */ +/* */ +/* Default Key Bindings */ +/* */ +/* **************************************************************** */ + +#if !defined (NO_TTY_DRIVER) +#define SET_SPECIAL(sc, func) set_special_char(kmap, &ttybuff, sc, func) +#endif + +#if defined (NO_TTY_DRIVER) + +#define SET_SPECIAL(sc, func) +#define RESET_SPECIAL(c) + +#elif defined (NEW_TTY_DRIVER) +static void +set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func) +{ + if (sc != -1 && kmap[(unsigned char)sc].type == ISFUNC) + kmap[(unsigned char)sc].function = func; +} + +#define RESET_SPECIAL(c) \ + if (c != -1 && kmap[(unsigned char)c].type == ISFUNC) \ + kmap[(unsigned char)c].function = rl_insert; + +static void +_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff) +{ + if (ttybuff.flags & SGTTY_SET) + { + SET_SPECIAL (ttybuff.sgttyb.sg_erase, rl_rubout); + SET_SPECIAL (ttybuff.sgttyb.sg_kill, rl_unix_line_discard); + } + +# if defined (TIOCGLTC) + if (ttybuff.flags & LTCHARS_SET) + { + SET_SPECIAL (ttybuff.ltchars.t_werasc, rl_unix_word_rubout); + SET_SPECIAL (ttybuff.ltchars.t_lnextc, rl_quoted_insert); + } +# endif /* TIOCGLTC */ +} + +#else /* !NEW_TTY_DRIVER */ +static void +set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func) +{ + unsigned char uc; + + uc = tiop->c_cc[sc]; + if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) + kmap[uc].function = func; +} + +/* used later */ +#define RESET_SPECIAL(uc) \ + if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) \ + kmap[uc].function = rl_insert; + +static void +_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff) +{ + SET_SPECIAL (VERASE, rl_rubout); + SET_SPECIAL (VKILL, rl_unix_line_discard); + +# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER) + SET_SPECIAL (VLNEXT, rl_quoted_insert); +# endif /* VLNEXT && TERMIOS_TTY_DRIVER */ + +# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER) +# if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + SET_SPECIAL (VWERASE, rl_vi_unix_word_rubout); + else +# endif + SET_SPECIAL (VWERASE, rl_unix_word_rubout); +# endif /* VWERASE && TERMIOS_TTY_DRIVER */ +} + +#endif /* !NEW_TTY_DRIVER */ + +/* Set the system's default editing characters to their readline equivalents + in KMAP. Should be static, now that we have rl_tty_set_default_bindings. */ +void +rltty_set_default_bindings (Keymap kmap) +{ +#if !defined (NO_TTY_DRIVER) + TIOTYPE ttybuff; + int tty; + + tty = fileno (rl_instream); + + if (get_tty_settings (tty, &ttybuff) == 0) + _rl_bind_tty_special_chars (kmap, ttybuff); +#endif +} + +/* New public way to set the system default editing chars to their readline + equivalents. */ +void +rl_tty_set_default_bindings (Keymap kmap) +{ + rltty_set_default_bindings (kmap); +} + +/* Rebind all of the tty special chars that readline worries about back + to self-insert. Call this before saving the current terminal special + chars with save_tty_chars(). This only works on POSIX termios or termio + systems. */ +void +rl_tty_unset_default_bindings (Keymap kmap) +{ + /* Don't bother before we've saved the tty special chars at least once. */ + if (RL_ISSTATE(RL_STATE_TTYCSAVED) == 0) + return; + + RESET_SPECIAL (_rl_tty_chars.t_erase); + RESET_SPECIAL (_rl_tty_chars.t_kill); + +# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER) + RESET_SPECIAL (_rl_tty_chars.t_lnext); +# endif /* VLNEXT && TERMIOS_TTY_DRIVER */ + +# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER) + RESET_SPECIAL (_rl_tty_chars.t_werase); +# endif /* VWERASE && TERMIOS_TTY_DRIVER */ +} + +#if defined (HANDLE_SIGNALS) + +#if defined (NEW_TTY_DRIVER) || defined (NO_TTY_DRIVER) +int +_rl_disable_tty_signals (void) +{ + return 0; +} + +int +_rl_restore_tty_signals (void) +{ + return 0; +} +#else + +static TIOTYPE sigstty, nosigstty; +static int tty_sigs_disabled = 0; + +int +_rl_disable_tty_signals (void) +{ + if (tty_sigs_disabled) + return 0; + + if (_get_tty_settings (fileno (rl_instream), &sigstty) < 0) + return -1; + + nosigstty = sigstty; + + nosigstty.c_lflag &= ~ISIG; + nosigstty.c_iflag &= ~IXON; + + if (_set_tty_settings (fileno (rl_instream), &nosigstty) < 0) + return (_set_tty_settings (fileno (rl_instream), &sigstty)); + + tty_sigs_disabled = 1; + return 0; +} + +int +_rl_restore_tty_signals (void) +{ + int r; + + if (tty_sigs_disabled == 0) + return 0; + + r = _set_tty_settings (fileno (rl_instream), &sigstty); + + if (r == 0) + tty_sigs_disabled = 0; + + return r; +} +#endif /* !NEW_TTY_DRIVER */ + +#endif /* HANDLE_SIGNALS */ diff --git a/readline/readline/rltty.h b/readline/readline/rltty.h new file mode 100644 index 0000000000..5bcc946b27 --- /dev/null +++ b/readline/readline/rltty.h @@ -0,0 +1,80 @@ +/* rltty.h - tty driver-related definitions used by some library files. */ + +/* Copyright (C) 1995-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RLTTY_H_) +#define _RLTTY_H_ + +/* Posix systems use termios and the Posix signal functions. */ +#if defined (TERMIOS_TTY_DRIVER) +# include +#endif /* TERMIOS_TTY_DRIVER */ + +/* System V machines use termio. */ +#if defined (TERMIO_TTY_DRIVER) +# include +# if !defined (TCOON) +# define TCOON 1 +# endif +#endif /* TERMIO_TTY_DRIVER */ + +/* Other (BSD) machines use sgtty. */ +#if defined (NEW_TTY_DRIVER) +# include +#endif + +#include "rlwinsize.h" + +/* Define _POSIX_VDISABLE if we are not using the `new' tty driver and + it is not already defined. It is used both to determine if a + special character is disabled and to disable certain special + characters. Posix systems should set to 0, USG systems to -1. */ +#if !defined (NEW_TTY_DRIVER) && !defined (_POSIX_VDISABLE) +# if defined (_SVR4_VDISABLE) +# define _POSIX_VDISABLE _SVR4_VDISABLE +# else +# if defined (_POSIX_VERSION) +# define _POSIX_VDISABLE 0 +# else /* !_POSIX_VERSION */ +# define _POSIX_VDISABLE -1 +# endif /* !_POSIX_VERSION */ +# endif /* !_SVR4_DISABLE */ +#endif /* !NEW_TTY_DRIVER && !_POSIX_VDISABLE */ + +typedef struct _rl_tty_chars { + unsigned char t_eof; + unsigned char t_eol; + unsigned char t_eol2; + unsigned char t_erase; + unsigned char t_werase; + unsigned char t_kill; + unsigned char t_reprint; + unsigned char t_intr; + unsigned char t_quit; + unsigned char t_susp; + unsigned char t_dsusp; + unsigned char t_start; + unsigned char t_stop; + unsigned char t_lnext; + unsigned char t_flush; + unsigned char t_status; +} _RL_TTY_CHARS; + +#endif /* _RLTTY_H_ */ diff --git a/readline/readline/rltypedefs.h b/readline/readline/rltypedefs.h new file mode 100644 index 0000000000..f9f5cd3a5b --- /dev/null +++ b/readline/readline/rltypedefs.h @@ -0,0 +1,100 @@ +/* rltypedefs.h -- Type declarations for readline functions. */ + +/* Copyright (C) 2000-2011 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#ifndef _RL_TYPEDEFS_H_ +#define _RL_TYPEDEFS_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Old-style, attempt to mark as deprecated in some way people will notice. */ + +#if !defined (_FUNCTION_DEF) +# define _FUNCTION_DEF + +#if defined(__GNUC__) || defined(__clang__) +typedef int Function () __attribute__ ((deprecated)); +typedef void VFunction () __attribute__ ((deprecated)); +typedef char *CPFunction () __attribute__ ((deprecated)); +typedef char **CPPFunction () __attribute__ ((deprecated)); +#else +typedef int Function (); +typedef void VFunction (); +typedef char *CPFunction (); +typedef char **CPPFunction (); +#endif + +#endif /* _FUNCTION_DEF */ + +/* New style. */ + +#if !defined (_RL_FUNCTION_TYPEDEF) +# define _RL_FUNCTION_TYPEDEF + +/* Bindable functions */ +typedef int rl_command_func_t PARAMS((int, int)); + +/* Typedefs for the completion system */ +typedef char *rl_compentry_func_t PARAMS((const char *, int)); +typedef char **rl_completion_func_t PARAMS((const char *, int, int)); + +typedef char *rl_quote_func_t PARAMS((char *, int, char *)); +typedef char *rl_dequote_func_t PARAMS((char *, int)); + +typedef int rl_compignore_func_t PARAMS((char **)); + +typedef void rl_compdisp_func_t PARAMS((char **, int, int)); + +/* Type for input and pre-read hook functions like rl_event_hook */ +typedef int rl_hook_func_t PARAMS((void)); + +/* Input function type */ +typedef int rl_getc_func_t PARAMS((FILE *)); + +/* Generic function that takes a character buffer (which could be the readline + line buffer) and an index into it (which could be rl_point) and returns + an int. */ +typedef int rl_linebuf_func_t PARAMS((char *, int)); + +/* `Generic' function pointer typedefs */ +typedef int rl_intfunc_t PARAMS((int)); +#define rl_ivoidfunc_t rl_hook_func_t +typedef int rl_icpfunc_t PARAMS((char *)); +typedef int rl_icppfunc_t PARAMS((char **)); + +typedef void rl_voidfunc_t PARAMS((void)); +typedef void rl_vintfunc_t PARAMS((int)); +typedef void rl_vcpfunc_t PARAMS((char *)); +typedef void rl_vcppfunc_t PARAMS((char **)); + +typedef char *rl_cpvfunc_t PARAMS((void)); +typedef char *rl_cpifunc_t PARAMS((int)); +typedef char *rl_cpcpfunc_t PARAMS((char *)); +typedef char *rl_cpcppfunc_t PARAMS((char **)); + +#endif /* _RL_FUNCTION_TYPEDEF */ + +#ifdef __cplusplus +} +#endif + +#endif /* _RL_TYPEDEFS_H_ */ diff --git a/readline/readline/rlwinsize.h b/readline/readline/rlwinsize.h new file mode 100644 index 0000000000..d198fcf872 --- /dev/null +++ b/readline/readline/rlwinsize.h @@ -0,0 +1,58 @@ +/* rlwinsize.h -- an attempt to isolate some of the system-specific defines + for `struct winsize' and TIOCGWINSZ. */ + +/* Copyright (C) 1997-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RLWINSIZE_H_) +#define _RLWINSIZE_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +/* Try to find the definitions of `struct winsize' and TIOGCWINSZ */ + +#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) +# include +#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ + +#if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +# include +#endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ + +/* Not in either of the standard places, look around. */ +#if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) +# if defined (HAVE_SYS_STREAM_H) +# include +# endif /* HAVE_SYS_STREAM_H */ +# if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */ +# include +# define _IO_PTEM_H /* work around SVR4.2 1.1.4 bug */ +# endif /* HAVE_SYS_PTEM_H */ +# if defined (HAVE_SYS_PTE_H) /* ??? */ +# include +# endif /* HAVE_SYS_PTE_H */ +#endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ + +#if defined (M_UNIX) && !defined (_SCO_DS) && !defined (tcflow) +# define tcflow(fd, action) ioctl(fd, TCXONC, action) +#endif + +#endif /* _RL_WINSIZE_H */ diff --git a/readline/readline/savestring.c b/readline/readline/savestring.c new file mode 100644 index 0000000000..f4bb6aa1a9 --- /dev/null +++ b/readline/readline/savestring.c @@ -0,0 +1,40 @@ +/* savestring.c - function version of savestring for backwards compatibility */ + +/* Copyright (C) 1998,2003,2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#include +#ifdef HAVE_STRING_H +# include +#endif +#include "xmalloc.h" + +/* Backwards compatibility, now that savestring has been removed from + all `public' readline header files. */ +char * +savestring (const char *s) +{ + char *ret; + + ret = (char *)xmalloc (strlen (s) + 1); + strcpy (ret, s); + return ret; +} diff --git a/readline/readline/search.c b/readline/readline/search.c new file mode 100644 index 0000000000..c9c1f5d1dd --- /dev/null +++ b/readline/readline/search.c @@ -0,0 +1,658 @@ +/* search.c - code for non-incremental searching in emacs and vi modes. */ + +/* Copyright (C) 1992-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif + +#include "rldefs.h" +#include "rlmbutil.h" + +#include "readline.h" +#include "history.h" +#include "histlib.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +#ifdef abs +# undef abs +#endif +#define abs(x) (((x) >= 0) ? (x) : -(x)) + +_rl_search_cxt *_rl_nscxt = 0; + +extern HIST_ENTRY *_rl_saved_line_for_history; + +/* Functions imported from the rest of the library. */ +extern void _rl_free_history_entry PARAMS((HIST_ENTRY *)); + +static char *noninc_search_string = (char *) NULL; +static int noninc_history_pos; + +static char *prev_line_found = (char *) NULL; + +static int rl_history_search_len; +static int rl_history_search_pos; +static int rl_history_search_flags; + +static char *history_search_string; +static int history_string_size; + +static void make_history_line_current PARAMS((HIST_ENTRY *)); +static int noninc_search_from_pos PARAMS((char *, int, int, int, int *)); +static int noninc_dosearch PARAMS((char *, int, int)); +static int noninc_search PARAMS((int, int)); +static int rl_history_search_internal PARAMS((int, int)); +static void rl_history_search_reinit PARAMS((int)); + +static _rl_search_cxt *_rl_nsearch_init PARAMS((int, int)); +static void _rl_nsearch_abort PARAMS((_rl_search_cxt *)); +static int _rl_nsearch_dispatch PARAMS((_rl_search_cxt *, int)); + +/* Make the data from the history entry ENTRY be the contents of the + current line. This doesn't do anything with rl_point; the caller + must set it. */ +static void +make_history_line_current (HIST_ENTRY *entry) +{ + _rl_replace_text (entry->line, 0, rl_end); + _rl_fix_point (1); +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + /* POSIX.2 says that the `U' command doesn't affect the copy of any + command lines to the edit line. We're going to implement that by + making the undo list start after the matching line is copied to the + current editing buffer. */ + rl_free_undo_list (); +#endif + + if (_rl_saved_line_for_history) + _rl_free_history_entry (_rl_saved_line_for_history); + _rl_saved_line_for_history = (HIST_ENTRY *)NULL; +} + +/* Search the history list for STRING starting at absolute history position + POS. If STRING begins with `^', the search must match STRING at the + beginning of a history line, otherwise a full substring match is performed + for STRING. DIR < 0 means to search backwards through the history list, + DIR >= 0 means to search forward. */ +static int +noninc_search_from_pos (char *string, int pos, int dir, int flags, int *ncp) +{ + int ret, old, sflags; + char *s; + + if (pos < 0) + return -1; + + old = where_history (); + if (history_set_pos (pos) == 0) + return -1; + + RL_SETSTATE(RL_STATE_SEARCH); + /* These functions return the match offset in the line; history_offset gives + the matching line in the history list */ + if (flags & SF_PATTERN) + { + s = string; + sflags = 0; /* Non-anchored search */ + if (*s == '^') + { + sflags |= ANCHORED_SEARCH; + s++; + } + ret = _hs_history_patsearch (s, dir, sflags); + } + else if (*string == '^') + ret = history_search_prefix (string + 1, dir); + else + ret = history_search (string, dir); + RL_UNSETSTATE(RL_STATE_SEARCH); + + if (ncp) + *ncp = ret; /* caller will catch -1 to indicate no-op */ + + if (ret != -1) + ret = where_history (); + + history_set_pos (old); + return (ret); +} + +/* Search for a line in the history containing STRING. If DIR is < 0, the + search is backwards through previous entries, else through subsequent + entries. Returns 1 if the search was successful, 0 otherwise. */ +static int +noninc_dosearch (char *string, int dir, int flags) +{ + int oldpos, pos; + HIST_ENTRY *entry; + + if (string == 0 || *string == '\0' || noninc_history_pos < 0) + { + rl_ding (); + return 0; + } + + pos = noninc_search_from_pos (string, noninc_history_pos + dir, dir, flags, (int *)0); + if (pos == -1) + { + /* Search failed, current history position unchanged. */ + rl_maybe_unsave_line (); + rl_clear_message (); + rl_point = 0; + rl_ding (); + return 0; + } + + noninc_history_pos = pos; + + oldpos = where_history (); + history_set_pos (noninc_history_pos); + entry = current_history (); /* will never be NULL after successful search */ + +#if defined (VI_MODE) + if (rl_editing_mode != vi_mode) +#endif + history_set_pos (oldpos); + + make_history_line_current (entry); + + rl_point = 0; + rl_mark = rl_end; + + rl_clear_message (); + return 1; +} + +static _rl_search_cxt * +_rl_nsearch_init (int dir, int pchar) +{ + _rl_search_cxt *cxt; + char *p; + + cxt = _rl_scxt_alloc (RL_SEARCH_NSEARCH, 0); + if (dir < 0) + cxt->sflags |= SF_REVERSE; /* not strictly needed */ +#if defined (VI_MODE) + if (VI_COMMAND_MODE() && (pchar == '?' || pchar == '/')) + cxt->sflags |= SF_PATTERN; +#endif + + cxt->direction = dir; + cxt->history_pos = cxt->save_line; + + rl_maybe_save_line (); + + /* Clear the undo list, since reading the search string should create its + own undo list, and the whole list will end up being freed when we + finish reading the search string. */ + rl_undo_list = 0; + + /* Use the line buffer to read the search string. */ + rl_line_buffer[0] = 0; + rl_end = rl_point = 0; + + p = _rl_make_prompt_for_search (pchar ? pchar : ':'); + rl_message ("%s", p); + xfree (p); + + RL_SETSTATE(RL_STATE_NSEARCH); + + _rl_nscxt = cxt; + + return cxt; +} + +int +_rl_nsearch_cleanup (_rl_search_cxt *cxt, int r) +{ + _rl_scxt_dispose (cxt, 0); + _rl_nscxt = 0; + + RL_UNSETSTATE(RL_STATE_NSEARCH); + + return (r != 1); +} + +static void +_rl_nsearch_abort (_rl_search_cxt *cxt) +{ + rl_maybe_unsave_line (); + rl_clear_message (); + rl_point = cxt->save_point; + rl_mark = cxt->save_mark; + rl_restore_prompt (); + + RL_UNSETSTATE (RL_STATE_NSEARCH); +} + +/* Process just-read character C according to search context CXT. Return -1 + if the caller should abort the search, 0 if we should break out of the + loop, and 1 if we should continue to read characters. */ +static int +_rl_nsearch_dispatch (_rl_search_cxt *cxt, int c) +{ + if (c < 0) + c = CTRL ('C'); + + switch (c) + { + case CTRL('W'): + rl_unix_word_rubout (1, c); + break; + + case CTRL('U'): + rl_unix_line_discard (1, c); + break; + + case RETURN: + case NEWLINE: + return 0; + + case CTRL('H'): + case RUBOUT: + if (rl_point == 0) + { + _rl_nsearch_abort (cxt); + return -1; + } + _rl_rubout_char (1, c); + break; + + case CTRL('C'): + case CTRL('G'): + rl_ding (); + _rl_nsearch_abort (cxt); + return -1; + + default: +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_insert_text (cxt->mb); + else +#endif + _rl_insert_char (1, c); + break; + } + + (*rl_redisplay_function) (); + return 1; +} + +/* Perform one search according to CXT, using NONINC_SEARCH_STRING. Return + -1 if the search should be aborted, any other value means to clean up + using _rl_nsearch_cleanup (). Returns 1 if the search was successful, + 0 otherwise. */ +static int +_rl_nsearch_dosearch (_rl_search_cxt *cxt) +{ + rl_mark = cxt->save_mark; + + /* If rl_point == 0, we want to re-use the previous search string and + start from the saved history position. If there's no previous search + string, punt. */ + if (rl_point == 0) + { + if (noninc_search_string == 0) + { + rl_ding (); + rl_restore_prompt (); + RL_UNSETSTATE (RL_STATE_NSEARCH); + return -1; + } + } + else + { + /* We want to start the search from the current history position. */ + noninc_history_pos = cxt->save_line; + FREE (noninc_search_string); + noninc_search_string = savestring (rl_line_buffer); + + /* If we don't want the subsequent undo list generated by the search + matching a history line to include the contents of the search string, + we need to clear rl_line_buffer here. For now, we just clear the + undo list generated by reading the search string. (If the search + fails, the old undo list will be restored by rl_maybe_unsave_line.) */ + rl_free_undo_list (); + } + + rl_restore_prompt (); + return (noninc_dosearch (noninc_search_string, cxt->direction, cxt->sflags&SF_PATTERN)); +} + +/* Search non-interactively through the history list. DIR < 0 means to + search backwards through the history of previous commands; otherwise + the search is for commands subsequent to the current position in the + history list. PCHAR is the character to use for prompting when reading + the search string; if not specified (0), it defaults to `:'. */ +static int +noninc_search (int dir, int pchar) +{ + _rl_search_cxt *cxt; + int c, r; + + cxt = _rl_nsearch_init (dir, pchar); + + if (RL_ISSTATE (RL_STATE_CALLBACK)) + return (0); + + /* Read the search string. */ + r = 0; + while (1) + { + c = _rl_search_getchar (cxt); + + if (c < 0) + { + _rl_nsearch_abort (cxt); + return 1; + } + + if (c == 0) + break; + + r = _rl_nsearch_dispatch (cxt, c); + if (r < 0) + return 1; + else if (r == 0) + break; + } + + r = _rl_nsearch_dosearch (cxt); + return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1)); +} + +/* Search forward through the history list for a string. If the vi-mode + code calls this, KEY will be `?'. */ +int +rl_noninc_forward_search (int count, int key) +{ + return noninc_search (1, (key == '?') ? '?' : 0); +} + +/* Reverse search the history list for a string. If the vi-mode code + calls this, KEY will be `/'. */ +int +rl_noninc_reverse_search (int count, int key) +{ + return noninc_search (-1, (key == '/') ? '/' : 0); +} + +/* Search forward through the history list for the last string searched + for. If there is no saved search string, abort. If the vi-mode code + calls this, KEY will be `N'. */ +int +rl_noninc_forward_search_again (int count, int key) +{ + int r; + + if (!noninc_search_string) + { + rl_ding (); + return (1); + } +#if defined (VI_MODE) + if (VI_COMMAND_MODE() && key == 'N') + r = noninc_dosearch (noninc_search_string, 1, SF_PATTERN); + else +#endif + r = noninc_dosearch (noninc_search_string, 1, 0); + return (r != 1); +} + +/* Reverse search in the history list for the last string searched + for. If there is no saved search string, abort. If the vi-mode code + calls this, KEY will be `n'. */ +int +rl_noninc_reverse_search_again (int count, int key) +{ + int r; + + if (!noninc_search_string) + { + rl_ding (); + return (1); + } +#if defined (VI_MODE) + if (VI_COMMAND_MODE() && key == 'n') + r = noninc_dosearch (noninc_search_string, -1, SF_PATTERN); + else +#endif + r = noninc_dosearch (noninc_search_string, -1, 0); + return (r != 1); +} + +#if defined (READLINE_CALLBACKS) +int +_rl_nsearch_callback (_rl_search_cxt *cxt) +{ + int c, r; + + c = _rl_search_getchar (cxt); + if (c <= 0) + { + if (c < 0) + _rl_nsearch_abort (cxt); + return 1; + } + r = _rl_nsearch_dispatch (cxt, c); + if (r != 0) + return 1; + + r = _rl_nsearch_dosearch (cxt); + return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1)); +} +#endif + +static int +rl_history_search_internal (int count, int dir) +{ + HIST_ENTRY *temp; + int ret, oldpos, newcol; + char *t; + + rl_maybe_save_line (); + temp = (HIST_ENTRY *)NULL; + + /* Search COUNT times through the history for a line matching + history_search_string. If history_search_string[0] == '^', the + line must match from the start; otherwise any substring can match. + When this loop finishes, TEMP, if non-null, is the history line to + copy into the line buffer. */ + while (count) + { + RL_CHECK_SIGNALS (); + ret = noninc_search_from_pos (history_search_string, rl_history_search_pos + dir, dir, 0, &newcol); + if (ret == -1) + break; + + /* Get the history entry we found. */ + rl_history_search_pos = ret; + oldpos = where_history (); + history_set_pos (rl_history_search_pos); + temp = current_history (); /* will never be NULL after successful search */ + history_set_pos (oldpos); + + /* Don't find multiple instances of the same line. */ + if (prev_line_found && STREQ (prev_line_found, temp->line)) + continue; + prev_line_found = temp->line; + count--; + } + + /* If we didn't find anything at all, return. */ + if (temp == 0) + { + rl_maybe_unsave_line (); + rl_ding (); + /* If you don't want the saved history line (last match) to show up + in the line buffer after the search fails, change the #if 0 to + #if 1 */ +#if 0 + if (rl_point > rl_history_search_len) + { + rl_point = rl_end = rl_history_search_len; + rl_line_buffer[rl_end] = '\0'; + rl_mark = 0; + } +#else + rl_point = rl_history_search_len; /* rl_maybe_unsave_line changes it */ + rl_mark = rl_end; +#endif + return 1; + } + + /* Copy the line we found into the current line buffer. */ + make_history_line_current (temp); + + /* decide where to put rl_point -- need to change this for pattern search */ + if (rl_history_search_flags & ANCHORED_SEARCH) + rl_point = rl_history_search_len; /* easy case */ + else + { +#if 0 + t = strstr (rl_line_buffer, history_search_string); /* XXX */ + rl_point = t ? (int)(t - rl_line_buffer) + rl_history_search_len : rl_end; +#else + rl_point = (newcol >= 0) ? newcol : rl_end; +#endif + } + rl_mark = rl_end; + + return 0; +} + +static void +rl_history_search_reinit (int flags) +{ + int sind; + + rl_history_search_pos = where_history (); + rl_history_search_len = rl_point; + rl_history_search_flags = flags; + + prev_line_found = (char *)NULL; + if (rl_point) + { + /* Allocate enough space for anchored and non-anchored searches */ + if (rl_history_search_len >= history_string_size - 2) + { + history_string_size = rl_history_search_len + 2; + history_search_string = (char *)xrealloc (history_search_string, history_string_size); + } + sind = 0; + if (flags & ANCHORED_SEARCH) + history_search_string[sind++] = '^'; + strncpy (history_search_string + sind, rl_line_buffer, rl_point); + history_search_string[rl_point + sind] = '\0'; + } + _rl_free_saved_history_line (); +} + +/* Search forward in the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. The search is anchored to the beginning of the history line. */ +int +rl_history_search_forward (int count, int ignore) +{ + if (count == 0) + return (0); + + if (rl_last_func != rl_history_search_forward && + rl_last_func != rl_history_search_backward) + rl_history_search_reinit (ANCHORED_SEARCH); + + if (rl_history_search_len == 0) + return (rl_get_next_history (count, ignore)); + return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1)); +} + +/* Search backward through the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. */ +int +rl_history_search_backward (int count, int ignore) +{ + if (count == 0) + return (0); + + if (rl_last_func != rl_history_search_forward && + rl_last_func != rl_history_search_backward) + rl_history_search_reinit (ANCHORED_SEARCH); + + if (rl_history_search_len == 0) + return (rl_get_previous_history (count, ignore)); + return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1)); +} + +/* Search forward in the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. The search succeeds if the search string is present anywhere + in the history line. */ +int +rl_history_substr_search_forward (int count, int ignore) +{ + if (count == 0) + return (0); + + if (rl_last_func != rl_history_substr_search_forward && + rl_last_func != rl_history_substr_search_backward) + rl_history_search_reinit (NON_ANCHORED_SEARCH); + + if (rl_history_search_len == 0) + return (rl_get_next_history (count, ignore)); + return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1)); +} + +/* Search backward through the history for the string of characters + from the start of the line to rl_point. This is a non-incremental + search. */ +int +rl_history_substr_search_backward (int count, int ignore) +{ + if (count == 0) + return (0); + + if (rl_last_func != rl_history_substr_search_forward && + rl_last_func != rl_history_substr_search_backward) + rl_history_search_reinit (NON_ANCHORED_SEARCH); + + if (rl_history_search_len == 0) + return (rl_get_previous_history (count, ignore)); + return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1)); +} diff --git a/readline/readline/shell.c b/readline/readline/shell.c new file mode 100644 index 0000000000..7fe2e97c98 --- /dev/null +++ b/readline/readline/shell.c @@ -0,0 +1,214 @@ +/* shell.c -- readline utility functions that are normally provided by + bash when readline is linked as part of the shell. */ + +/* Copyright (C) 1997-2009,2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_STRING_H) +# include +#else +# include +#endif /* !HAVE_STRING_H */ + +#if defined (HAVE_LIMITS_H) +# include +#endif + +#if defined (HAVE_FCNTL_H) +#include +#endif +#if defined (HAVE_PWD_H) +#include +#endif + +#include + +#include "rlstdc.h" +#include "rlshell.h" +#include "rldefs.h" + +#include "xmalloc.h" + +#if defined (HAVE_GETPWUID) && !defined (HAVE_GETPW_DECLS) +extern struct passwd *getpwuid PARAMS((uid_t)); +#endif /* HAVE_GETPWUID && !HAVE_GETPW_DECLS */ + +#ifndef NULL +# define NULL 0 +#endif + +#ifndef CHAR_BIT +# define CHAR_BIT 8 +#endif + +/* Nonzero if the integer type T is signed. */ +#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1)) + +/* Bound on length of the string representing an integer value of type T. + Subtract one for the sign bit if T is signed; + 302 / 1000 is log10 (2) rounded up; + add one for integer division truncation; + add one more for a minus sign if t is signed. */ +#define INT_STRLEN_BOUND(t) \ + ((sizeof (t) * CHAR_BIT - TYPE_SIGNED (t)) * 302 / 1000 \ + + 1 + TYPE_SIGNED (t)) + +/* All of these functions are resolved from bash if we are linking readline + as part of bash. */ + +/* Does shell-like quoting using single quotes. */ +char * +sh_single_quote (char *string) +{ + register int c; + char *result, *r, *s; + + result = (char *)xmalloc (3 + (4 * strlen (string))); + r = result; + *r++ = '\''; + + for (s = string; s && (c = *s); s++) + { + *r++ = c; + + if (c == '\'') + { + *r++ = '\\'; /* insert escaped single quote */ + *r++ = '\''; + *r++ = '\''; /* start new quoted string */ + } + } + + *r++ = '\''; + *r = '\0'; + + return (result); +} + +/* Set the environment variables LINES and COLUMNS to lines and cols, + respectively. */ +static char setenv_buf[INT_STRLEN_BOUND (int) + 1]; +static char putenv_buf1[INT_STRLEN_BOUND (int) + 6 + 1]; /* sizeof("LINES=") == 6 */ +static char putenv_buf2[INT_STRLEN_BOUND (int) + 8 + 1]; /* sizeof("COLUMNS=") == 8 */ + +void +sh_set_lines_and_columns (int lines, int cols) +{ +#if defined (HAVE_SETENV) + sprintf (setenv_buf, "%d", lines); + setenv ("LINES", setenv_buf, 1); + + sprintf (setenv_buf, "%d", cols); + setenv ("COLUMNS", setenv_buf, 1); +#else /* !HAVE_SETENV */ +# if defined (HAVE_PUTENV) + sprintf (putenv_buf1, "LINES=%d", lines); + putenv (putenv_buf1); + + sprintf (putenv_buf2, "COLUMNS=%d", cols); + putenv (putenv_buf2); +# endif /* HAVE_PUTENV */ +#endif /* !HAVE_SETENV */ +} + +char * +sh_get_env_value (const char *varname) +{ + return ((char *)getenv (varname)); +} + +char * +sh_get_home_dir (void) +{ + static char *home_dir = (char *)NULL; + struct passwd *entry; + + if (home_dir) + return (home_dir); + + home_dir = (char *)NULL; +#if defined (HAVE_GETPWUID) +# if defined (__TANDEM) + entry = getpwnam (getlogin ()); +# else + entry = getpwuid (getuid ()); +# endif + if (entry) + home_dir = savestring (entry->pw_dir); +#endif + +#if defined (HAVE_GETPWENT) + endpwent (); /* some systems need this */ +#endif + + return (home_dir); +} + +#if !defined (O_NDELAY) +# if defined (FNDELAY) +# define O_NDELAY FNDELAY +# endif +#endif + +int +sh_unset_nodelay_mode (int fd) +{ +#if defined (HAVE_FCNTL) + int flags, bflags; + + if ((flags = fcntl (fd, F_GETFL, 0)) < 0) + return -1; + + bflags = 0; + +#ifdef O_NONBLOCK + bflags |= O_NONBLOCK; +#endif + +#ifdef O_NDELAY + bflags |= O_NDELAY; +#endif + + if (flags & bflags) + { + flags &= ~bflags; + return (fcntl (fd, F_SETFL, flags)); + } +#endif + + return 0; +} diff --git a/readline/readline/shlib/Makefile.in b/readline/readline/shlib/Makefile.in new file mode 100644 index 0000000000..f2ec3e46b7 --- /dev/null +++ b/readline/readline/shlib/Makefile.in @@ -0,0 +1,501 @@ +## -*- text -*- ## +# Makefile for the GNU readline library shared library support. +# +# Copyright (C) 1998-2009 Free Software Foundation, Inc. + +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +PACKAGE = @PACKAGE_NAME@ +VERSION = @PACKAGE_VERSION@ + +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_VERSION = @PACKAGE_VERSION@ + +RL_LIBRARY_VERSION = @LIBVERSION@ +RL_LIBRARY_NAME = readline + +datarootdir = @datarootdir@ + +srcdir = @srcdir@ +VPATH = @top_srcdir@ +topdir = @top_srcdir@ +BUILD_DIR = @BUILD_DIR@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +CC = @CC@ +RANLIB = @RANLIB@ +AR = @AR@ +ARFLAGS = @ARFLAGS@ +RM = rm -f +CP = cp +MV = mv +LN = ln + +SHELL = @MAKE_SHELL@ + +host_os = @host_os@ +host_vendor = @host_vendor@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +includedir = @includedir@ +bindir = @bindir@ +libdir = @libdir@ +datadir = @datadir@ +localedir = @localedir@ + +# Support an alternate destination root directory for package building +DESTDIR = + +CFLAGS = @CFLAGS@ +LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@ @CFLAGS@ + +DEFS = @DEFS@ @CROSS_COMPILE@ +LOCAL_DEFS = @LOCAL_DEFS@ + +# +# These values are generated for configure by ${topdir}/support/shobj-conf. +# If your system is not supported by that script, but includes facilities for +# dynamic loading of shared objects, please update the script and send the +# changes to bash-maintainers@gnu.org. +# +SHOBJ_CC = @SHOBJ_CC@ +SHOBJ_CFLAGS = @SHOBJ_CFLAGS@ +SHOBJ_LD = @SHOBJ_LD@ + +SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@ +SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@ +SHOBJ_LIBS = @SHOBJ_LIBS@ + +SHLIB_XLDFLAGS = @LDFLAGS@ @SHLIB_XLDFLAGS@ +SHLIB_LIBS = @SHLIB_LIBS@ + +SHLIB_DOT = @SHLIB_DOT@ +SHLIB_LIBPREF = @SHLIB_LIBPREF@ +SHLIB_LIBSUFF = @SHLIB_LIBSUFF@ + +SHLIB_LIBVERSION = @SHLIB_LIBVERSION@ +SHLIB_DLLVERSION = @SHLIB_DLLVERSION@ + +SHLIB_STATUS = @SHLIB_STATUS@ + +TERMCAP_LIB = @TERMCAP_LIB@ + +# shared library versioning +SHLIB_MAJOR= @SHLIB_MAJOR@ +# shared library systems like SVR4's do not use minor versions +SHLIB_MINOR= .@SHLIB_MINOR@ + +# For libraries which include headers from other libraries. +INCLUDES = -I. -I.. -I$(topdir) + +CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(INCLUDES) $(CPPFLAGS) $(LOCAL_CFLAGS) $(CFLAGS) + +.SUFFIXES: .so + +.c.so: + ${RM} $@ + $(SHOBJ_CC) -c $(CCFLAGS) $(SHOBJ_CFLAGS) -o $*.o $< + $(MV) $*.o $@ + +# The name of the main library target. + +SHARED_READLINE = $(SHLIB_LIBPREF)readline$(SHLIB_DOT)$(SHLIB_LIBVERSION) +SHARED_HISTORY = $(SHLIB_LIBPREF)history$(SHLIB_DOT)$(SHLIB_LIBVERSION) +SHARED_LIBS = $(SHARED_READLINE) $(SHARED_HISTORY) + +# The C code source files for this library. +CSOURCES = $(topdir)/readline.c $(topdir)/funmap.c $(topdir)/keymaps.c \ + $(topdir)/vi_mode.c $(topdir)/parens.c $(topdir)/rltty.c \ + $(topdir)/complete.c $(topdir)/bind.c $(topdir)/isearch.c \ + $(topdir)/display.c $(topdir)/signals.c $(topdir)/emacs_keymap.c \ + $(topdir)/vi_keymap.c $(topdir)/util.c $(topdir)/kill.c \ + $(topdir)/undo.c $(topdir)/macro.c $(topdir)/input.c \ + $(topdir)/callback.c $(topdir)/terminal.c $(topdir)/xmalloc.c $(topdir)/xfree.c \ + $(topdir)/history.c $(topdir)/histsearch.c $(topdir)/histexpand.c \ + $(topdir)/histfile.c $(topdir)/nls.c $(topdir)/search.c \ + $(topdir)/shell.c $(topdir)/savestring.c $(topdir)/tilde.c \ + $(topdir)/text.c $(topdir)/misc.c $(topdir)/compat.c \ + $(topdir)/colors.c $(topdir)/parse-colors.c \ + $(topdir)/mbutil.c + +# The header files for this library. +HSOURCES = $(topdir)/readline.h $(topdir)/rldefs.h $(topdir)/chardefs.h \ + $(topdir)/keymaps.h $(topdir)/history.h $(topdir)/histlib.h \ + $(topdir)/posixstat.h $(topdir)/posixdir.h $(topdir)/posixjmp.h \ + $(topdir)/tilde.h $(topdir)/rlconf.h $(topdir)/rltty.h \ + $(topdir)/ansi_stdlib.h $(topdir)/tcap.h $(topdir)/rlstdc.h \ + $(topdir)/xmalloc.h $(topdir)/rlprivate.h $(topdir)/rlshell.h \ + $(topdir)/rltypedefs.h $(topdir)/rlmbutil.h \ + $(topdir)/colors.h $(topdir)/parse-colors.h + +SHARED_HISTOBJ = history.so histexpand.so histfile.so histsearch.so shell.so \ + mbutil.so +SHARED_TILDEOBJ = tilde.so +SHARED_COLORSOBJ = colors.so parse-colors.so +SHARED_OBJ = readline.so vi_mode.so funmap.so keymaps.so parens.so search.so \ + rltty.so complete.so bind.so isearch.so display.so signals.so \ + util.so kill.so undo.so macro.so input.so callback.so terminal.so \ + text.so nls.so misc.so \ + $(SHARED_HISTOBJ) $(SHARED_TILDEOBJ) $(SHARED_COLORSOBJ) \ + xmalloc.so xfree.so compat.so + +########################################################################## + +all: $(SHLIB_STATUS) + +supported: $(SHARED_LIBS) + +unsupported: + @echo "Your system and compiler (${host_os}-${CC}) are not supported by the" + @echo "${topdir}/support/shobj-conf script." + @echo "If your operating system provides facilities for creating" + @echo "shared libraries, please update the script and re-run configure." + @echo "Please send the changes you made to bash-maintainers@gnu.org" + @echo "for inclusion in future bash and readline releases." + +$(SHARED_READLINE): $(SHARED_OBJ) + $(RM) $@ + $(SHOBJ_LD) ${SHOBJ_LDFLAGS} ${SHLIB_XLDFLAGS} -o $@ $(SHARED_OBJ) $(SHLIB_LIBS) + +$(SHARED_HISTORY): $(SHARED_HISTOBJ) xmalloc.so xfree.so + $(RM) $@ + $(SHOBJ_LD) ${SHOBJ_LDFLAGS} ${SHLIB_XLDFLAGS} -o $@ $(SHARED_HISTOBJ) xmalloc.so xfree.so $(SHLIB_LIBS) + +# Since tilde.c is shared between readline and bash, make sure we compile +# it with the right flags when it's built as part of readline +tilde.so: tilde.c + ${RM} $@ + $(SHOBJ_CC) -c $(CCFLAGS) $(SHOBJ_CFLAGS) -DREADLINE_LIBRARY -c -o tilde.o $(topdir)/tilde.c + $(MV) tilde.o $@ + +installdirs: $(topdir)/support/mkdirs + -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(libdir) + -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(bindir) + +install-supported: installdirs $(SHLIB_STATUS) + $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -i "$(INSTALL_DATA)" $(SHARED_HISTORY) + $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -i "$(INSTALL_DATA)" $(SHARED_READLINE) + @echo install: you may need to run ldconfig + +install-unsupported: + @echo install: shared libraries not supported + +install: install-$(SHLIB_STATUS) + +uninstall-supported: + $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -U $(SHARED_HISTORY) + $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -U $(SHARED_READLINE) + @echo uninstall: you may need to run ldconfig + +uninstall-unsupported: + @echo uninstall: shared libraries not supported + +uninstall: uninstall-$(SHLIB_STATUS) + +clean mostlyclean: force + $(RM) $(SHARED_OBJ) $(SHARED_LIBS) + +distclean maintainer-clean: clean + $(RM) Makefile + +force: + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: + +# Dependencies +bind.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h +bind.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +bind.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +bind.so: $(topdir)/rltypedefs.h +bind.so: $(topdir)/tilde.h $(topdir)/history.h +compat.so: ${BUILD_DIR}/config.h +compat.so: $(topdir)/rlstdc.h $(topdir)/rltypedefs.h +callback.so: $(topdir)/rlconf.h +callback.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h +callback.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +callback.so: $(topdir)/rltypedefs.h +callback.so: $(topdir)/tilde.h +complete.so: $(topdir)/ansi_stdlib.h $(topdir)/posixdir.h $(topdir)/posixstat.h +complete.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +complete.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +complete.so: $(topdir)/rltypedefs.h +complete.so: $(topdir)/tilde.h +display.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h +display.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +display.so: $(topdir)/tcap.h +display.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +display.so: $(topdir)/rltypedefs.h +display.so: $(topdir)/tilde.h $(topdir)/history.h +funmap.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +funmap.so: $(topdir)/rltypedefs.h +funmap.so: $(topdir)/rlconf.h $(topdir)/ansi_stdlib.h +funmap.so: ${BUILD_DIR}/config.h $(topdir)/tilde.h +histexpand.so: $(topdir)/ansi_stdlib.h +histexpand.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h +histexpand.so: ${BUILD_DIR}/config.h +histfile.so: $(topdir)/ansi_stdlib.h +histfile.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h +histfile.so: ${BUILD_DIR}/config.h +history.so: $(topdir)/ansi_stdlib.h +history.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h +history.so: ${BUILD_DIR}/config.h +histsearch.so: $(topdir)/ansi_stdlib.h +histsearch.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h +histsearch.so: ${BUILD_DIR}/config.h +input.so: $(topdir)/ansi_stdlib.h +input.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +input.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +input.so: $(topdir)/rltypedefs.h +input.so: $(topdir)/tilde.h +isearch.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +isearch.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +isearch.so: $(topdir)/rltypedefs.h +isearch.so: $(topdir)/ansi_stdlib.h $(topdir)/history.h $(topdir)/tilde.h +keymaps.so: $(topdir)/keymaps.h $(topdir)/chardefs.h $(topdir)/rlconf.h +keymaps.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +keymaps.so: $(topdir)/rltypedefs.h +keymaps.so: ${BUILD_DIR}/config.h $(topdir)/ansi_stdlib.h $(topdir)/tilde.h +kill.so: $(topdir)/ansi_stdlib.h +kill.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +kill.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +kill.so: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rltypedefs.h +macro.so: $(topdir)/ansi_stdlib.h +macro.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +macro.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +macro.so: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rltypedefs.h +mbutil.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +mbutil.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h +mbutil.so: $(topdir)/chardefs.h $(topdir)/rlstdc.h +misc.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +misc.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +misc.so: $(topdir)/rltypedefs.h +misc.so: $(topdir)/history.h $(topdir)/tilde.h $(topdir)/ansi_stdlib.h +nls.so: $(topdir)/ansi_stdlib.h +nls.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +nls.o: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +nls.o: $(topdir)/rltypedefs.h +nls.o: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rlstdc.h +parens.so: $(topdir)/rlconf.h ${BUILD_DIR}/config.h +parens.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +parens.so: $(topdir)/rltypedefs.h +parens.so: $(topdir)/tilde.h +rltty.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +rltty.so: $(topdir)/rltty.h $(topdir)/tilde.h +rltty.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +rltty.so: $(topdir)/rltypedefs.h +savestring.so: ${BUILD_DIR}/config.h +search.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +search.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +search.so: $(topdir)/ansi_stdlib.h $(topdir)/history.h $(topdir)/tilde.h +search.so: $(topdir)/rltypedefs.h +signals.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +signals.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +signals.so: $(topdir)/history.h $(topdir)/tilde.h +signals.so: $(topdir)/rltypedefs.h +terminal.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +terminal.so: $(topdir)/tcap.h +terminal.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +terminal.so: $(topdir)/tilde.h $(topdir)/history.h +terminal.so: $(topdir)/rltypedefs.h +text.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +text.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +text.so: $(topdir)/rltypedefs.h +text.so: $(topdir)/history.h $(topdir)/tilde.h $(topdir)/ansi_stdlib.h +tilde.so: $(topdir)/ansi_stdlib.h ${BUILD_DIR}/config.h $(topdir)/tilde.h +undo.so: $(topdir)/ansi_stdlib.h +undo.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +undo.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +undo.so: $(topdir)/rltypedefs.h +undo.so: $(topdir)/tilde.h $(topdir)/history.h +util.so: $(topdir)/posixjmp.h $(topdir)/ansi_stdlib.h +util.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +util.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +util.so: $(topdir)/rltypedefs.h $(topdir)/tilde.h +vi_mode.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h +vi_mode.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h +vi_mode.so: $(topdir)/history.h $(topdir)/ansi_stdlib.h $(topdir)/tilde.h +vi_mode.so: $(topdir)/rltypedefs.h +xfree.so: ${BUILD_DIR}/config.h +xfree.so: $(topdir)/ansi_stdlib.h +xmalloc.so: ${BUILD_DIR}/config.h +xmalloc.so: $(topdir)/ansi_stdlib.h + +bind.so: $(topdir)/rlshell.h +histfile.so: $(topdir)/rlshell.h +nls.so: $(topdir)/rlshell.h +readline.so: $(topdir)/rlshell.h +shell.so: $(topdir)/rlshell.h +terminal.so: $(topdir)/rlshell.h +histexpand.so: $(topdir)/rlshell.h + +colors.so: $(BUILD_DIR)/config.h $(topdir)/colors.h +colors.so: $(topdir)/rlconf.h +colors.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h +colors.so: $(topdir)/chardefs.h $(topdir)/tilde.h $(topdir)/rlstdc.h +colors.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h +parse-colors.so: $(BUILD_DIR)/config.h $(topdir)/colors.h $(topdir)/parse-colors.h +parse-colors.so: $(topdir)/rldefs.h $(topdir)/rlconf.h +parse-colors.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h +parse-colors.so: $(topdir)/chardefs.h $(topdir)/tilde.h $(topdir)/rlstdc.h + +bind.so: $(topdir)/rlprivate.h +callback.so: $(topdir)/rlprivate.h +complete.so: $(topdir)/rlprivate.h +display.so: $(topdir)/rlprivate.h +input.so: $(topdir)/rlprivate.h +isearch.so: $(topdir)/rlprivate.h +kill.so: $(topdir)/rlprivate.h +macro.so: $(topdir)/rlprivate.h +mbutil.so: $(topdir)/rlprivate.h +misc.so: $(topdir)/rlprivate.h +nls.so: $(topdir)/rlprivate.h +parens.so: $(topdir)/rlprivate.h +readline.so: $(topdir)/rlprivate.h +rltty.so: $(topdir)/rlprivate.h +search.so: $(topdir)/rlprivate.h +signals.so: $(topdir)/rlprivate.h +terminal.so: $(topdir)/rlprivate.h +text.so: $(topdir)/rlprivate.h +undo.so: $(topdir)/rlprivate.h +util.so: $(topdir)/rlprivate.h +vi_mode.so: $(topdir)/rlprivate.h +colors.so: $(topdir)/rlprivate.h +parse-colors.so: $(topdir)/rlprivate.h + +bind.so: $(topdir)/xmalloc.h +callback.so: $(topdir)/xmalloc.h +complete.so: $(topdir)/xmalloc.h +display.so: $(topdir)/xmalloc.h +funmap.so: $(topdir)/xmalloc.h +histexpand.so: $(topdir)/xmalloc.h +histfile.so: $(topdir)/xmalloc.h +history.so: $(topdir)/xmalloc.h +input.so: $(topdir)/xmalloc.h +isearch.so: $(topdir)/xmalloc.h +keymaps.so: $(topdir)/xmalloc.h +kill.so: $(topdir)/xmalloc.h +macro.so: $(topdir)/xmalloc.h +mbutil.so: $(topdir)/xmalloc.h +misc.so: $(topdir)/xmalloc.h +readline.so: $(topdir)/xmalloc.h +savestring.so: $(topdir)/xmalloc.h +search.so: $(topdir)/xmalloc.h +shell.so: $(topdir)/xmalloc.h +terminal.so: $(topdir)/xmalloc.h +text.so: $(topdir)/xmalloc.h +tilde.so: $(topdir)/xmalloc.h +undo.so: $(topdir)/xmalloc.h +util.so: $(topdir)/xmalloc.h +vi_mode.so: $(topdir)/xmalloc.h +xfree.so: $(topdir)/xmalloc.h +xmalloc.so: $(topdir)/xmalloc.h +colors.so: $(topdir)/xmalloc.h +parse-colors.so: $(topdir)/xmalloc.h + +complete.so: $(topdir)/rlmbutil.h +display.so: $(topdir)/rlmbutil.h +histexpand.so: $(topdir)/rlmbutil.h +input.so: $(topdir)/rlmbutil.h +isearch.so: $(topdir)/rlmbutil.h +mbutil.so: $(topdir)/rlmbutil.h +misc.so: $(topdir)/rlmbutil.h +readline.so: $(topdir)/rlmbutil.h +search.so: $(topdir)/rlmbutil.h +text.so: $(topdir)/rlmbutil.h +vi_mode.so: $(topdir)/rlmbutil.h +colors.so: $(topdir)/rlmbutil.h +parse-colors.so: $(topdir)/rlmbutil.h + +bind.so: $(topdir)/bind.c +callback.so: $(topdir)/callback.c +compat.so: $(topdir)/compat.c +complete.so: $(topdir)/complete.c +display.so: $(topdir)/display.c +funmap.so: $(topdir)/funmap.c +input.so: $(topdir)/input.c +isearch.so: $(topdir)/isearch.c +keymaps.so: $(topdir)/keymaps.c $(topdir)/emacs_keymap.c $(topdir)/vi_keymap.c +kill.so: $(topdir)/kill.c +macro.so: $(topdir)/macro.c +mbutil.so: $(topdir)/mbutil.c +misc.so: $(topdir)/mbutil.c +nls.so: $(topdir)/nls.c +parens.so: $(topdir)/parens.c +readline.so: $(topdir)/readline.c +rltty.so: $(topdir)/rltty.c +savestring.so: $(topdir)/savestring.c +search.so: $(topdir)/search.c +shell.so: $(topdir)/shell.c +signals.so: $(topdir)/signals.c +terminal.so: $(topdir)/terminal.c +text.so: $(topdir)/text.c +tilde.so: $(topdir)/tilde.c +undo.so: $(topdir)/undo.c +util.so: $(topdir)/util.c +vi_mode.so: $(topdir)/vi_mode.c +xfree.so: $(topdir)/xfree.c +xmalloc.so: $(topdir)/xmalloc.c + +histexpand.so: $(topdir)/histexpand.c +histfile.so: $(topdir)/histfile.c +history.so: $(topdir)/history.c +histsearch.so: $(topdir)/histsearch.c + +bind.so: bind.c +callback.so: callback.c +comapt.so: compat.c +complete.so: complete.c +display.so: display.c +funmap.so: funmap.c +input.so: input.c +isearch.so: isearch.c +keymaps.so: keymaps.c emacs_keymap.c vi_keymap.c +kill.so: kill.c +macro.so: macro.c +mbutil.so: mbutil.c +misc.so: misc.c +nls.so: nls.c +parens.so: parens.c +readline.so: readline.c +rltty.so: rltty.c +savestring.so: savestring.c +search.so: search.c +signals.so: signals.c +shell.so: shell.c +terminal.so: terminal.c +text.so: text.c +tilde.so: tilde.c +undo.so: undo.c +util.so: util.c +vi_mode.so: vi_mode.c +xfree.so: xfree.c +xmalloc.so: xmalloc.c + +colors.so: colors.c +parse-colors.so: parse-colors.c + +histexpand.so: histexpand.c +histfile.so: histfile.c +history.so: history.c +histsearch.so: histsearch.c diff --git a/readline/readline/signals.c b/readline/readline/signals.c new file mode 100644 index 0000000000..76c5c47330 --- /dev/null +++ b/readline/readline/signals.c @@ -0,0 +1,742 @@ +/* signals.c -- signal handling support for readline. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include /* Just for NULL. Yuck. */ +#include +#include + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#if defined (GWINSZ_IN_SYS_IOCTL) +# include +#endif /* GWINSZ_IN_SYS_IOCTL */ + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" + +#if defined (HANDLE_SIGNALS) + +#if !defined (RETSIGTYPE) +# if defined (VOID_SIGHANDLER) +# define RETSIGTYPE void +# else +# define RETSIGTYPE int +# endif /* !VOID_SIGHANDLER */ +#endif /* !RETSIGTYPE */ + +#if defined (VOID_SIGHANDLER) +# define SIGHANDLER_RETURN return +#else +# define SIGHANDLER_RETURN return (0) +#endif + +/* This typedef is equivalent to the one for Function; it allows us + to say SigHandler *foo = signal (SIGKILL, SIG_IGN); */ +typedef RETSIGTYPE SigHandler (); + +#if defined (HAVE_POSIX_SIGNALS) +typedef struct sigaction sighandler_cxt; +# define rl_sigaction(s, nh, oh) sigaction(s, nh, oh) +#else +typedef struct { SigHandler *sa_handler; int sa_mask, sa_flags; } sighandler_cxt; +# define sigemptyset(m) +#endif /* !HAVE_POSIX_SIGNALS */ + +#ifndef SA_RESTART +# define SA_RESTART 0 +#endif + +static SigHandler *rl_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *)); +static void rl_maybe_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *)); +static void rl_maybe_restore_sighandler PARAMS((int, sighandler_cxt *)); + +static RETSIGTYPE rl_signal_handler PARAMS((int)); +static RETSIGTYPE _rl_handle_signal PARAMS((int)); + +/* Exported variables for use by applications. */ + +/* If non-zero, readline will install its own signal handlers for + SIGINT, SIGTERM, SIGHUP, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */ +int rl_catch_signals = 1; + +/* If non-zero, readline will install a signal handler for SIGWINCH. */ +#ifdef SIGWINCH +int rl_catch_sigwinch = 1; +#else +int rl_catch_sigwinch = 0; /* for the readline state struct in readline.c */ +#endif + +/* Private variables. */ +int _rl_interrupt_immediately = 0; +int volatile _rl_caught_signal = 0; /* should be sig_atomic_t, but that requires including everywhere */ + +/* If non-zero, print characters corresponding to received signals as long as + the user has indicated his desire to do so (_rl_echo_control_chars). */ +int _rl_echoctl = 0; + +int _rl_intr_char = 0; +int _rl_quit_char = 0; +int _rl_susp_char = 0; + +static int signals_set_flag; +static int sigwinch_set_flag; + +#if defined (HAVE_POSIX_SIGNALS) +sigset_t _rl_orig_sigset; +#endif /* !HAVE_POSIX_SIGNALS */ + +/* **************************************************************** */ +/* */ +/* Signal Handling */ +/* */ +/* **************************************************************** */ + +static sighandler_cxt old_int, old_term, old_hup, old_alrm, old_quit; +#if defined (SIGTSTP) +static sighandler_cxt old_tstp, old_ttou, old_ttin; +#endif +#if defined (SIGWINCH) +static sighandler_cxt old_winch; +#endif + +_rl_sigcleanup_func_t *_rl_sigcleanup; +void *_rl_sigcleanarg; + +/* Readline signal handler functions. */ + +/* Called from RL_CHECK_SIGNALS() macro */ +RETSIGTYPE +_rl_signal_handler (int sig) +{ + _rl_caught_signal = 0; /* XXX */ + +#if defined (SIGWINCH) + if (sig == SIGWINCH) + { + rl_resize_terminal (); + /* XXX - experimental for now */ + /* Call a signal hook because though we called the original signal handler + in rl_sigwinch_handler below, we will not resend the signal to + ourselves. */ + if (rl_signal_event_hook) + (*rl_signal_event_hook) (); + } + else +#endif + _rl_handle_signal (sig); + + SIGHANDLER_RETURN; +} + +static RETSIGTYPE +rl_signal_handler (int sig) +{ + if (_rl_interrupt_immediately) + { + _rl_interrupt_immediately = 0; + _rl_handle_signal (sig); + } + else + _rl_caught_signal = sig; + + SIGHANDLER_RETURN; +} + +static RETSIGTYPE +_rl_handle_signal (int sig) +{ +#if defined (HAVE_POSIX_SIGNALS) + sigset_t set; +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + long omask; +# else /* !HAVE_BSD_SIGNALS */ + sighandler_cxt dummy_cxt; /* needed for rl_set_sighandler call */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + + RL_SETSTATE(RL_STATE_SIGHANDLER); + +#if !defined (HAVE_BSD_SIGNALS) && !defined (HAVE_POSIX_SIGNALS) + /* Since the signal will not be blocked while we are in the signal + handler, ignore it until rl_clear_signals resets the catcher. */ +# if defined (SIGALRM) + if (sig == SIGINT || sig == SIGALRM) +# else + if (sig == SIGINT) +# endif + rl_set_sighandler (sig, SIG_IGN, &dummy_cxt); +#endif /* !HAVE_BSD_SIGNALS && !HAVE_POSIX_SIGNALS */ + + /* If there's a sig cleanup function registered, call it and `deregister' + the cleanup function to avoid multiple calls */ + if (_rl_sigcleanup) + { + (*_rl_sigcleanup) (sig, _rl_sigcleanarg); + _rl_sigcleanup = 0; + _rl_sigcleanarg = 0; + } + + switch (sig) + { + case SIGINT: + _rl_reset_completion_state (); + rl_free_line_state (); +#if defined (READLINE_CALLBACKS) + rl_callback_sigcleanup (); +#endif + + /* FALLTHROUGH */ + +#if defined (SIGTSTP) + case SIGTSTP: + case SIGTTIN: +# if defined (HAVE_POSIX_SIGNALS) + /* Block SIGTTOU so we can restore the terminal settings to something + sane without stopping on SIGTTOU if we have been placed into the + background. Even trying to get the current terminal pgrp with + tcgetpgrp() will generate SIGTTOU, so we don't bother. Don't bother + doing this if we've been stopped on SIGTTOU; it's aready too late. */ + sigemptyset (&set); + sigaddset (&set, SIGTTOU); + sigprocmask (SIG_BLOCK, &set, (sigset_t *)NULL); +# endif + case SIGTTOU: +#endif /* SIGTSTP */ + case SIGTERM: +#if defined (SIGHUP) + case SIGHUP: +#endif +#if defined (SIGALRM) + case SIGALRM: +#endif +#if defined (SIGQUIT) + case SIGQUIT: +#endif + rl_echo_signal_char (sig); + rl_cleanup_after_signal (); + +#if defined (HAVE_POSIX_SIGNALS) +# if defined (SIGTSTP) + /* Unblock SIGTTOU blocked above */ + if (sig == SIGTTIN || sig == SIGTSTP) + sigprocmask (SIG_UNBLOCK, &set, (sigset_t *)NULL); +# endif + + sigemptyset (&set); + sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set); + sigdelset (&set, sig); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + omask = sigblock (0); +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +#if defined (__EMX__) + signal (sig, SIG_ACK); +#endif + +#if defined (HAVE_KILL) + kill (getpid (), sig); +#else + raise (sig); /* assume we have raise */ +#endif + + /* Let the signal that we just sent through. */ +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_SETMASK, &set, (sigset_t *)NULL); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + sigsetmask (omask & ~(sigmask (sig))); +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + + rl_reset_after_signal (); + } + + RL_UNSETSTATE(RL_STATE_SIGHANDLER); + SIGHANDLER_RETURN; +} + +#if defined (SIGWINCH) +static RETSIGTYPE +rl_sigwinch_handler (int sig) +{ + SigHandler *oh; + +#if defined (MUST_REINSTALL_SIGHANDLERS) + sighandler_cxt dummy_winch; + + /* We don't want to change old_winch -- it holds the state of SIGWINCH + disposition set by the calling application. We need this state + because we call the application's SIGWINCH handler after updating + our own idea of the screen size. */ + rl_set_sighandler (SIGWINCH, rl_sigwinch_handler, &dummy_winch); +#endif + + RL_SETSTATE(RL_STATE_SIGHANDLER); + _rl_caught_signal = sig; + + /* If another sigwinch handler has been installed, call it. */ + oh = (SigHandler *)old_winch.sa_handler; + if (oh && oh != (SigHandler *)SIG_IGN && oh != (SigHandler *)SIG_DFL) + (*oh) (sig); + + RL_UNSETSTATE(RL_STATE_SIGHANDLER); + SIGHANDLER_RETURN; +} +#endif /* SIGWINCH */ + +/* Functions to manage signal handling. */ + +#if !defined (HAVE_POSIX_SIGNALS) +static int +rl_sigaction (int sig, sighandler_cxt *nh, sighandler_cxt *oh) +{ + oh->sa_handler = signal (sig, nh->sa_handler); + return 0; +} +#endif /* !HAVE_POSIX_SIGNALS */ + +/* Set up a readline-specific signal handler, saving the old signal + information in OHANDLER. Return the old signal handler, like + signal(). */ +static SigHandler * +rl_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler) +{ + sighandler_cxt old_handler; +#if defined (HAVE_POSIX_SIGNALS) + struct sigaction act; + + act.sa_handler = handler; +# if defined (SIGWINCH) + act.sa_flags = (sig == SIGWINCH) ? SA_RESTART : 0; +# else + act.sa_flags = 0; +# endif /* SIGWINCH */ + sigemptyset (&act.sa_mask); + sigemptyset (&ohandler->sa_mask); + sigaction (sig, &act, &old_handler); +#else + old_handler.sa_handler = (SigHandler *)signal (sig, handler); +#endif /* !HAVE_POSIX_SIGNALS */ + + /* XXX -- assume we have memcpy */ + /* If rl_set_signals is called twice in a row, don't set the old handler to + rl_signal_handler, because that would cause infinite recursion. */ + if (handler != rl_signal_handler || old_handler.sa_handler != rl_signal_handler) + memcpy (ohandler, &old_handler, sizeof (sighandler_cxt)); + + return (ohandler->sa_handler); +} + +/* Set disposition of SIG to HANDLER, returning old state in OHANDLER. Don't + change disposition if OHANDLER indicates the signal was ignored. */ +static void +rl_maybe_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler) +{ + sighandler_cxt dummy; + SigHandler *oh; + + sigemptyset (&dummy.sa_mask); + dummy.sa_flags = 0; + oh = rl_set_sighandler (sig, handler, ohandler); + if (oh == (SigHandler *)SIG_IGN) + rl_sigaction (sig, ohandler, &dummy); +} + +/* Set the disposition of SIG to HANDLER, if HANDLER->sa_handler indicates the + signal was not being ignored. MUST only be called for signals whose + disposition was changed using rl_maybe_set_sighandler or for which the + SIG_IGN check was performed inline (e.g., SIGALRM below). */ +static void +rl_maybe_restore_sighandler (int sig, sighandler_cxt *handler) +{ + sighandler_cxt dummy; + + sigemptyset (&dummy.sa_mask); + dummy.sa_flags = 0; + if (handler->sa_handler != SIG_IGN) + rl_sigaction (sig, handler, &dummy); +} + +int +rl_set_signals (void) +{ + sighandler_cxt dummy; + SigHandler *oh; +#if defined (HAVE_POSIX_SIGNALS) + static int sigmask_set = 0; + static sigset_t bset, oset; +#endif + +#if defined (HAVE_POSIX_SIGNALS) + if (rl_catch_signals && sigmask_set == 0) + { + sigemptyset (&bset); + + sigaddset (&bset, SIGINT); + sigaddset (&bset, SIGTERM); +#if defined (SIGHUP) + sigaddset (&bset, SIGHUP); +#endif +#if defined (SIGQUIT) + sigaddset (&bset, SIGQUIT); +#endif +#if defined (SIGALRM) + sigaddset (&bset, SIGALRM); +#endif +#if defined (SIGTSTP) + sigaddset (&bset, SIGTSTP); +#endif +#if defined (SIGTTIN) + sigaddset (&bset, SIGTTIN); +#endif +#if defined (SIGTTOU) + sigaddset (&bset, SIGTTOU); +#endif + sigmask_set = 1; + } +#endif /* HAVE_POSIX_SIGNALS */ + + if (rl_catch_signals && signals_set_flag == 0) + { +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&_rl_orig_sigset); + sigprocmask (SIG_BLOCK, &bset, &_rl_orig_sigset); +#endif + + rl_maybe_set_sighandler (SIGINT, rl_signal_handler, &old_int); + rl_maybe_set_sighandler (SIGTERM, rl_signal_handler, &old_term); +#if defined (SIGHUP) + rl_maybe_set_sighandler (SIGHUP, rl_signal_handler, &old_hup); +#endif +#if defined (SIGQUIT) + rl_maybe_set_sighandler (SIGQUIT, rl_signal_handler, &old_quit); +#endif + +#if defined (SIGALRM) + oh = rl_set_sighandler (SIGALRM, rl_signal_handler, &old_alrm); + if (oh == (SigHandler *)SIG_IGN) + rl_sigaction (SIGALRM, &old_alrm, &dummy); +#if defined (HAVE_POSIX_SIGNALS) && defined (SA_RESTART) + /* If the application using readline has already installed a signal + handler with SA_RESTART, SIGALRM will cause reads to be restarted + automatically, so readline should just get out of the way. Since + we tested for SIG_IGN above, we can just test for SIG_DFL here. */ + if (oh != (SigHandler *)SIG_DFL && (old_alrm.sa_flags & SA_RESTART)) + rl_sigaction (SIGALRM, &old_alrm, &dummy); +#endif /* HAVE_POSIX_SIGNALS */ +#endif /* SIGALRM */ + +#if defined (SIGTSTP) + rl_maybe_set_sighandler (SIGTSTP, rl_signal_handler, &old_tstp); +#endif /* SIGTSTP */ + +#if defined (SIGTTOU) + rl_maybe_set_sighandler (SIGTTOU, rl_signal_handler, &old_ttou); +#endif /* SIGTTOU */ + +#if defined (SIGTTIN) + rl_maybe_set_sighandler (SIGTTIN, rl_signal_handler, &old_ttin); +#endif /* SIGTTIN */ + + signals_set_flag = 1; + +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_SETMASK, &_rl_orig_sigset, (sigset_t *)NULL); +#endif + } + else if (rl_catch_signals == 0) + { +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&_rl_orig_sigset); + sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &_rl_orig_sigset); +#endif + } + +#if defined (SIGWINCH) + if (rl_catch_sigwinch && sigwinch_set_flag == 0) + { + rl_maybe_set_sighandler (SIGWINCH, rl_sigwinch_handler, &old_winch); + sigwinch_set_flag = 1; + } +#endif /* SIGWINCH */ + + return 0; +} + +int +rl_clear_signals (void) +{ + sighandler_cxt dummy; + + if (rl_catch_signals && signals_set_flag == 1) + { + /* Since rl_maybe_set_sighandler doesn't override a SIG_IGN handler, + we should in theory not have to restore a handler where + old_xxx.sa_handler == SIG_IGN. That's what rl_maybe_restore_sighandler + does. Fewer system calls should reduce readline's per-line + overhead */ + rl_maybe_restore_sighandler (SIGINT, &old_int); + rl_maybe_restore_sighandler (SIGTERM, &old_term); +#if defined (SIGHUP) + rl_maybe_restore_sighandler (SIGHUP, &old_hup); +#endif +#if defined (SIGQUIT) + rl_maybe_restore_sighandler (SIGQUIT, &old_quit); +#endif +#if defined (SIGALRM) + rl_maybe_restore_sighandler (SIGALRM, &old_alrm); +#endif + +#if defined (SIGTSTP) + rl_maybe_restore_sighandler (SIGTSTP, &old_tstp); +#endif /* SIGTSTP */ + +#if defined (SIGTTOU) + rl_maybe_restore_sighandler (SIGTTOU, &old_ttou); +#endif /* SIGTTOU */ + +#if defined (SIGTTIN) + rl_maybe_restore_sighandler (SIGTTIN, &old_ttin); +#endif /* SIGTTIN */ + + signals_set_flag = 0; + } + +#if defined (SIGWINCH) + if (rl_catch_sigwinch && sigwinch_set_flag == 1) + { + sigemptyset (&dummy.sa_mask); + rl_sigaction (SIGWINCH, &old_winch, &dummy); + sigwinch_set_flag = 0; + } +#endif + + return 0; +} + +/* Clean up the terminal and readline state after catching a signal, before + resending it to the calling application. */ +void +rl_cleanup_after_signal (void) +{ + _rl_clean_up_for_exit (); + if (rl_deprep_term_function) + (*rl_deprep_term_function) (); + rl_clear_pending_input (); + rl_clear_signals (); +} + +/* Reset the terminal and readline state after a signal handler returns. */ +void +rl_reset_after_signal (void) +{ + if (rl_prep_term_function) + (*rl_prep_term_function) (_rl_meta_flag); + rl_set_signals (); +} + +/* Free up the readline variable line state for the current line (undo list, + any partial history entry, any keyboard macros in progress, and any + numeric arguments in process) after catching a signal, before calling + rl_cleanup_after_signal(). */ +void +rl_free_line_state (void) +{ + register HIST_ENTRY *entry; + + rl_free_undo_list (); + + entry = current_history (); + if (entry) + entry->data = (char *)NULL; + + _rl_kill_kbd_macro (); + rl_clear_message (); + _rl_reset_argument (); +} + +int +rl_pending_signal (void) +{ + return (_rl_caught_signal); +} + +void +rl_check_signals (void) +{ + RL_CHECK_SIGNALS (); +} +#endif /* HANDLE_SIGNALS */ + +/* **************************************************************** */ +/* */ +/* SIGINT Management */ +/* */ +/* **************************************************************** */ + +#if defined (HAVE_POSIX_SIGNALS) +static sigset_t sigint_set, sigint_oset; +static sigset_t sigwinch_set, sigwinch_oset; +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) +static int sigint_oldmask; +static int sigwinch_oldmask; +# endif /* HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +static int sigint_blocked; +static int sigwinch_blocked; + +/* Cause SIGINT to not be delivered until the corresponding call to + release_sigint(). */ +void +_rl_block_sigint (void) +{ + if (sigint_blocked) + return; + + sigint_blocked = 1; +} + +/* Allow SIGINT to be delivered. */ +void +_rl_release_sigint (void) +{ + if (sigint_blocked == 0) + return; + + sigint_blocked = 0; + RL_CHECK_SIGNALS (); +} + +/* Cause SIGWINCH to not be delivered until the corresponding call to + release_sigwinch(). */ +void +_rl_block_sigwinch (void) +{ + if (sigwinch_blocked) + return; + +#if defined (SIGWINCH) + +#if defined (HAVE_POSIX_SIGNALS) + sigemptyset (&sigwinch_set); + sigemptyset (&sigwinch_oset); + sigaddset (&sigwinch_set, SIGWINCH); + sigprocmask (SIG_BLOCK, &sigwinch_set, &sigwinch_oset); +#else /* !HAVE_POSIX_SIGNALS */ +# if defined (HAVE_BSD_SIGNALS) + sigwinch_oldmask = sigblock (sigmask (SIGWINCH)); +# else /* !HAVE_BSD_SIGNALS */ +# if defined (HAVE_USG_SIGHOLD) + sighold (SIGWINCH); +# endif /* HAVE_USG_SIGHOLD */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +#endif /* SIGWINCH */ + + sigwinch_blocked = 1; +} + +/* Allow SIGWINCH to be delivered. */ +void +_rl_release_sigwinch (void) +{ + if (sigwinch_blocked == 0) + return; + +#if defined (SIGWINCH) + +#if defined (HAVE_POSIX_SIGNALS) + sigprocmask (SIG_SETMASK, &sigwinch_oset, (sigset_t *)NULL); +#else +# if defined (HAVE_BSD_SIGNALS) + sigsetmask (sigwinch_oldmask); +# else /* !HAVE_BSD_SIGNALS */ +# if defined (HAVE_USG_SIGHOLD) + sigrelse (SIGWINCH); +# endif /* HAVE_USG_SIGHOLD */ +# endif /* !HAVE_BSD_SIGNALS */ +#endif /* !HAVE_POSIX_SIGNALS */ + +#endif /* SIGWINCH */ + + sigwinch_blocked = 0; +} + +/* **************************************************************** */ +/* */ +/* Echoing special control characters */ +/* */ +/* **************************************************************** */ +void +rl_echo_signal_char (int sig) +{ + char cstr[3]; + int cslen, c; + + if (_rl_echoctl == 0 || _rl_echo_control_chars == 0) + return; + + switch (sig) + { + case SIGINT: c = _rl_intr_char; break; +#if defined (SIGQUIT) + case SIGQUIT: c = _rl_quit_char; break; +#endif +#if defined (SIGTSTP) + case SIGTSTP: c = _rl_susp_char; break; +#endif + default: return; + } + + if (CTRL_CHAR (c) || c == RUBOUT) + { + cstr[0] = '^'; + cstr[1] = CTRL_CHAR (c) ? UNCTRL (c) : '?'; + cstr[cslen = 2] = '\0'; + } + else + { + cstr[0] = c; + cstr[cslen = 1] = '\0'; + } + + _rl_output_some_chars (cstr, cslen); +} diff --git a/readline/readline/support/config.guess b/readline/readline/support/config.guess new file mode 100755 index 0000000000..15c6cbfc5d --- /dev/null +++ b/readline/readline/support/config.guess @@ -0,0 +1,1702 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright 1992-2019 Free Software Foundation, Inc. + +timestamp='2019-08-04' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, see . +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). +# +# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. +# +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess +# +# Please send patches to . + + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright 1992-2019 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +tmp= +# shellcheck disable=SC2172 +trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 + +set_cc_for_build() { + : "${TMPDIR=/tmp}" + # shellcheck disable=SC2039 + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } + dummy=$tmp/dummy + case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in + ,,) echo "int x;" > "$dummy.c" + for driver in cc gcc c89 c99 ; do + if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then + CC_FOR_BUILD="$driver" + break + fi + done + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; + esac +} + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if test -f /.attbin/uname ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +case "$UNAME_SYSTEM" in +Linux|GNU|GNU/*) + # If the system lacks a compiler, then just pick glibc. + # We could probably try harder. + LIBC=gnu + + set_cc_for_build + cat <<-EOF > "$dummy.c" + #include + #if defined(__UCLIBC__) + LIBC=uclibc + #elif defined(__dietlibc__) + LIBC=dietlibc + #else + LIBC=gnu + #endif + EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" + + # If ldd exists, use it to detect musl libc. + if command -v ldd >/dev/null && \ + ldd --version 2>&1 | grep -q ^musl + then + LIBC=musl + fi + ;; +esac + +# Note: order is significant - the case branches are not exclusive. + +case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + "/sbin/$sysctl" 2>/dev/null || \ + "/usr/sbin/$sysctl" 2>/dev/null || \ + echo unknown)` + case "$UNAME_MACHINE_ARCH" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + earmv*) + arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` + machine="${arch}${endian}"-unknown + ;; + *) machine="$UNAME_MACHINE_ARCH"-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently (or will in the future) and ABI. + case "$UNAME_MACHINE_ARCH" in + earm*) + os=netbsdelf + ;; + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # Determine ABI tags. + case "$UNAME_MACHINE_ARCH" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "$UNAME_VERSION" in + Debian*) + release='-gnu' + ;; + *) + release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "$machine-${os}${release}${abi-}" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" + exit ;; + *:Bitrig:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" + exit ;; + *:MidnightBSD:*:*) + echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" + exit ;; + *:ekkoBSD:*:*) + echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" + exit ;; + *:SolidBSD:*:*) + echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:MirBSD:*:*) + echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" + exit ;; + *:Sortix:*:*) + echo "$UNAME_MACHINE"-unknown-sortix + exit ;; + *:Redox:*:*) + echo "$UNAME_MACHINE"-unknown-redox + exit ;; + mips:OSF1:*.*) + echo mips-dec-osf1 + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE=alpha ;; + "EV4.5 (21064)") + UNAME_MACHINE=alpha ;; + "LCA4 (21066/21068)") + UNAME_MACHINE=alpha ;; + "EV5 (21164)") + UNAME_MACHINE=alphaev5 ;; + "EV5.6 (21164A)") + UNAME_MACHINE=alphaev56 ;; + "EV5.6 (21164PC)") + UNAME_MACHINE=alphapca56 ;; + "EV5.7 (21164PC)") + UNAME_MACHINE=alphapca57 ;; + "EV6 (21264)") + UNAME_MACHINE=alphaev6 ;; + "EV6.7 (21264A)") + UNAME_MACHINE=alphaev67 ;; + "EV6.8CB (21264C)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8AL (21264B)") + UNAME_MACHINE=alphaev68 ;; + "EV6.8CX (21264D)") + UNAME_MACHINE=alphaev68 ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE=alphaev69 ;; + "EV7 (21364)") + UNAME_MACHINE=alphaev7 ;; + "EV7.9 (21364A)") + UNAME_MACHINE=alphaev79 ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" + # Reset EXIT trap before exiting to avoid spurious non-zero exit code. + exitcode=$? + trap '' 0 + exit $exitcode ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo "$UNAME_MACHINE"-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix"$UNAME_RELEASE" + exit ;; + arm*:riscos:*:*|arm*:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux"$UNAME_RELEASE" + exit ;; + i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) + echo i386-pc-auroraux"$UNAME_RELEASE" + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + set_cc_for_build + SUN_ARCH=i386 + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH=x86_64 + fi + fi + echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos"$UNAME_RELEASE" + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos"$UNAME_RELEASE" + ;; + sun4) + echo sparc-sun-sunos"$UNAME_RELEASE" + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos"$UNAME_RELEASE" + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint"$UNAME_RELEASE" + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint"$UNAME_RELEASE" + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint"$UNAME_RELEASE" + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint"$UNAME_RELEASE" + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten"$UNAME_RELEASE" + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten"$UNAME_RELEASE" + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix"$UNAME_RELEASE" + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix"$UNAME_RELEASE" + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix"$UNAME_RELEASE" + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && + dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`"$dummy" "$dummyarg"` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos"$UNAME_RELEASE" + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] + then + if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ + [ "$TARGET_BINARY_INTERFACE"x = x ] + then + echo m88k-dg-dgux"$UNAME_RELEASE" + else + echo m88k-dg-dguxbcs"$UNAME_RELEASE" + fi + else + echo i586-dg-dgux"$UNAME_RELEASE" + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[4567]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/lslpp ] ; then + IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | + awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` + else + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" + fi + echo "$IBM_ARCH"-ibm-aix"$IBM_REV" + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + case "$UNAME_MACHINE" in + 9000/31?) HP_ARCH=m68000 ;; + 9000/[34]??) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "$sc_cpu_version" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "$sc_kernel_bits" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "$HP_ARCH" = "" ]; then + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ "$HP_ARCH" = hppa2.0w ] + then + set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH=hppa2.0w + else + HP_ARCH=hppa64 + fi + fi + echo "$HP_ARCH"-hp-hpux"$HPUX_REV" + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux"$HPUX_REV" + exit ;; + 3050*:HI-UX:*:*) + set_cc_for_build + sed 's/^ //' << EOF > "$dummy.c" + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo "$UNAME_MACHINE"-unknown-osf1mk + else + echo "$UNAME_MACHINE"-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi"$UNAME_RELEASE" + exit ;; + *:BSD/OS:*:*) + echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" + exit ;; + arm:FreeBSD:*:*) + UNAME_PROCESSOR=`uname -p` + set_cc_for_build + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi + else + echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf + fi + exit ;; + *:FreeBSD:*:*) + UNAME_PROCESSOR=`/usr/bin/uname -p` + case "$UNAME_PROCESSOR" in + amd64) + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; + esac + echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + i*:CYGWIN*:*) + echo "$UNAME_MACHINE"-pc-cygwin + exit ;; + *:MINGW64*:*) + echo "$UNAME_MACHINE"-pc-mingw64 + exit ;; + *:MINGW64*:*) + echo "$UNAME_MACHINE"-pc-mingw64 + exit ;; + *:MINGW*:*) + echo "$UNAME_MACHINE"-pc-mingw32 + exit ;; + *:MSYS*:*) + echo "$UNAME_MACHINE"-pc-msys + exit ;; + i*:PW*:*) + echo "$UNAME_MACHINE"-pc-pw32 + exit ;; + *:Interix*:*) + case "$UNAME_MACHINE" in + x86) + echo i586-pc-interix"$UNAME_RELEASE" + exit ;; + authenticamd | genuineintel | EM64T) + echo x86_64-unknown-interix"$UNAME_RELEASE" + exit ;; + IA64) + echo ia64-unknown-interix"$UNAME_RELEASE" + exit ;; + esac ;; + i*:UWIN*:*) + echo "$UNAME_MACHINE"-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-pc-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" + exit ;; + *:GNU:*:*) + # the GNU system + echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" + exit ;; + *:Minix:*:*) + echo "$UNAME_MACHINE"-unknown-minix + exit ;; + aarch64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + aarch64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + aarch64_be:Linux:*:*) + UNAME_MACHINE=aarch64_be + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arc:Linux:*:* | arceb:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + arm*:Linux:*:*) + set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + else + if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_PCS_VFP + then + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi + else + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf + fi + fi + exit ;; + avr32*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + cris:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + crisv32:Linux:*:*) + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + e2k:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + frv:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + hexagon:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + ia64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + k1om:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m32r*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + m68*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + set_cc_for_build + IS_GLIBC=0 + test x"${LIBC}" = xgnu && IS_GLIBC=1 + sed 's/^ //' << EOF > "$dummy.c" + #undef CPU + #undef mips + #undef mipsel + #undef mips64 + #undef mips64el + #if ${IS_GLIBC} && defined(_ABI64) + LIBCABI=gnuabi64 + #else + #if ${IS_GLIBC} && defined(_ABIN32) + LIBCABI=gnuabin32 + #else + LIBCABI=${LIBC} + #endif + #endif + + #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa64r6 + #else + #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 + CPU=mipsisa32r6 + #else + #if defined(__mips64) + CPU=mips64 + #else + CPU=mips + #endif + #endif + #endif + + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + MIPS_ENDIAN=el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + MIPS_ENDIAN= + #else + MIPS_ENDIAN= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`" + test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } + ;; + mips64el:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + openrisc*:Linux:*:*) + echo or1k-unknown-linux-"$LIBC" + exit ;; + or32:Linux:*:* | or1k*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-"$LIBC" + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-"$LIBC" + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; + PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; + *) echo hppa-unknown-linux-"$LIBC" ;; + esac + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-"$LIBC" + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-"$LIBC" + exit ;; + ppc64le:Linux:*:*) + echo powerpc64le-unknown-linux-"$LIBC" + exit ;; + ppcle:Linux:*:*) + echo powerpcle-unknown-linux-"$LIBC" + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" + exit ;; + sh64*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sh*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + tile*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + vax:Linux:*:*) + echo "$UNAME_MACHINE"-dec-linux-"$LIBC" + exit ;; + x86_64:Linux:*:*) + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" + exit ;; + xtensa*:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo "$UNAME_MACHINE"-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo "$UNAME_MACHINE"-unknown-stop + exit ;; + i*86:atheos:*:*) + echo "$UNAME_MACHINE"-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo "$UNAME_MACHINE"-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos"$UNAME_RELEASE" + exit ;; + i*86:*DOS:*:*) + echo "$UNAME_MACHINE"-pc-msdosdjgpp + exit ;; + i*86:*:4.*:*) + UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}" + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" + else + echo "$UNAME_MACHINE"-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configure will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos"$UNAME_RELEASE" + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos"$UNAME_RELEASE" + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos"$UNAME_RELEASE" + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv"$UNAME_RELEASE" + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo "$UNAME_MACHINE"-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo "$UNAME_MACHINE"-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux"$UNAME_RELEASE" + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv"$UNAME_RELEASE" + else + echo mips-unknown-sysv"$UNAME_RELEASE" + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + x86_64:Haiku:*:*) + echo x86_64-unknown-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux"$UNAME_RELEASE" + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux"$UNAME_RELEASE" + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux"$UNAME_RELEASE" + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux"$UNAME_RELEASE" + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux"$UNAME_RELEASE" + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux"$UNAME_RELEASE" + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Rhapsody:*:*) + echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + set_cc_for_build + if test "$UNAME_PROCESSOR" = unknown ; then + UNAME_PROCESSOR=powerpc + fi + if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then + if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + case $UNAME_PROCESSOR in + i386) UNAME_PROCESSOR=x86_64 ;; + powerpc) UNAME_PROCESSOR=powerpc64 ;; + esac + fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi + fi + elif test "$UNAME_PROCESSOR" = i386 ; then + # Avoid executing cc on OS X 10.9, as it ships with a stub + # that puts up a graphical alert prompting to install + # developer tools. Any system running Mac OS X 10.7 or + # later (Darwin 11 and later) is required to have a 64-bit + # processor. This is not true of the ARM version of Darwin + # that Apple uses in portable devices. + UNAME_PROCESSOR=x86_64 + fi + echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = x86; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NEO-*:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSE-*:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSR-*:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSV-*:NONSTOP_KERNEL:*:*) + echo nsv-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSX-*:NONSTOP_KERNEL:*:*) + echo nsx-tandem-nsk"$UNAME_RELEASE" + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + # shellcheck disable=SC2154 + if test "$cputype" = 386; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo "$UNAME_MACHINE"-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux"$UNAME_RELEASE" + exit ;; + *:DragonFly:*:*) + echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "$UNAME_MACHINE" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" + exit ;; + i*86:rdos:*:*) + echo "$UNAME_MACHINE"-pc-rdos + exit ;; + i*86:AROS:*:*) + echo "$UNAME_MACHINE"-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo "$UNAME_MACHINE"-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; + *:Unleashed:*:*) + echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE" + exit ;; + i*86:AROS:*:*) + echo "$UNAME_MACHINE"-pc-aros + exit ;; + x86_64:VMkernel:*:*) + echo "$UNAME_MACHINE"-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs + exit ;; +esac + +# No uname command or uname output not recognized. +set_cc_for_build +cat > "$dummy.c" < +#include +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#include +#if defined(_SIZE_T_) || defined(SIGLOST) +#include +#endif +#endif +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); +#endif + +#if defined (vax) +#if !defined (ultrix) +#include +#if defined (BSD) +#if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +#else +#if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#endif +#else + printf ("vax-dec-bsd\n"); exit (0); +#endif +#else +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname un; + uname (&un); + printf ("vax-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("vax-dec-ultrix\n"); exit (0); +#endif +#endif +#endif +#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) +#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) +#if defined(_SIZE_T_) || defined(SIGLOST) + struct utsname *un; + uname (&un); + printf ("mips-dec-ultrix%s\n", un.release); exit (0); +#else + printf ("mips-dec-ultrix\n"); exit (0); +#endif +#endif +#endif + +case "$UNAME_MACHINE:$UNAME_SYSTEM" in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 </dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. +test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } + +echo "$0: unable to guess system type" >&2 + +case "$UNAME_MACHINE:$UNAME_SYSTEM" in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 <&2 </dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = "$UNAME_MACHINE" +UNAME_RELEASE = "$UNAME_RELEASE" +UNAME_SYSTEM = "$UNAME_SYSTEM" +UNAME_VERSION = "$UNAME_VERSION" +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/readline/readline/support/config.rpath b/readline/readline/support/config.rpath new file mode 100755 index 0000000000..fc5913d787 --- /dev/null +++ b/readline/readline/support/config.rpath @@ -0,0 +1,684 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2018 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a '.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's _LT_CC_BASENAME. + +for cc_temp in $CC""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` + +# Code taken from libtool.m4's _LT_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | cygwin* | pw32* | os2* | cegcc*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + ecc*) + wl='-Wl,' + ;; + icc* | ifort*) + wl='-Wl,' + ;; + lf95*) + wl='-Wl,' + ;; + nagfor*) + wl='-Wl,-Wl,,' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + wl='-Wl,' + ;; + ccc*) + wl='-Wl,' + ;; + xl* | bgxl* | bgf* | mpixl*) + wl='-Wl,' + ;; + como) + wl='-lopt=' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ F* | *Sun*Fortran*) + wl= + ;; + *Sun\ C*) + wl='-Wl,' + ;; + esac + ;; + esac + ;; + newsos6) + ;; + *nto* | *qnx*) + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + rdos*) + ;; + solaris*) + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + wl='-Qoption ld ' + ;; + *) + wl='-Wl,' + ;; + esac + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + wl='-Wl,' + ;; + unicos*) + wl='-Wl,' + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's _LT_LINKER_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + case "$host_os" in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32* | cegcc*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + haiku*) + ;; + interix[3-9]*) + hardcode_direct=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + else + ld_shlibs=no + fi + ;; + esac + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = no; then + hardcode_libdir_flag_spec= + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + case "$host_cpu" in + powerpc) + ;; + m68k) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + bsdi[45]*) + ;; + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + hardcode_direct=no + if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then + : + else + ld_shlibs=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd2.[01]*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd* | dragonfly*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + hpux11*) + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + ;; + *) + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + *nto* | *qnx*) + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + ;; + sysv5* | sco3.2v5* | sco5v6*) + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. +# Unlike libtool.m4, here we don't care about _all_ names of the library, but +# only about the one the linker finds when passed -lNAME. This is the last +# element of library_names_spec in libtool.m4, or possibly two of them if the +# linker has special search rules. +library_names_spec= # the last element of library_names_spec in libtool.m4 +libname_spec='lib$name' +case "$host_os" in + aix3*) + library_names_spec='$libname.a' + ;; + aix[4-9]*) + library_names_spec='$libname$shrext' + ;; + amigaos*) + case "$host_cpu" in + powerpc*) + library_names_spec='$libname$shrext' ;; + m68k) + library_names_spec='$libname.a' ;; + esac + ;; + beos*) + library_names_spec='$libname$shrext' + ;; + bsdi[45]*) + library_names_spec='$libname$shrext' + ;; + cygwin* | mingw* | pw32* | cegcc*) + shrext=.dll + library_names_spec='$libname.dll.a $libname.lib' + ;; + darwin* | rhapsody*) + shrext=.dylib + library_names_spec='$libname$shrext' + ;; + dgux*) + library_names_spec='$libname$shrext' + ;; + freebsd[23].*) + library_names_spec='$libname$shrext$versuffix' + ;; + freebsd* | dragonfly*) + library_names_spec='$libname$shrext' + ;; + gnu*) + library_names_spec='$libname$shrext' + ;; + haiku*) + library_names_spec='$libname$shrext' + ;; + hpux9* | hpux10* | hpux11*) + case $host_cpu in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + library_names_spec='$libname$shrext' + ;; + interix[3-9]*) + library_names_spec='$libname$shrext' + ;; + irix5* | irix6* | nonstopux*) + library_names_spec='$libname$shrext' + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + library_names_spec='$libname$shrext' + ;; + knetbsd*-gnu) + library_names_spec='$libname$shrext' + ;; + netbsd*) + library_names_spec='$libname$shrext' + ;; + newsos6) + library_names_spec='$libname$shrext' + ;; + *nto* | *qnx*) + library_names_spec='$libname$shrext' + ;; + openbsd*) + library_names_spec='$libname$shrext$versuffix' + ;; + os2*) + libname_spec='$name' + shrext=.dll + library_names_spec='$libname.a' + ;; + osf3* | osf4* | osf5*) + library_names_spec='$libname$shrext' + ;; + rdos*) + ;; + solaris*) + library_names_spec='$libname$shrext' + ;; + sunos4*) + library_names_spec='$libname$shrext$versuffix' + ;; + sysv4 | sysv4.3*) + library_names_spec='$libname$shrext' + ;; + sysv4*MP*) + library_names_spec='$libname$shrext' + ;; + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + library_names_spec='$libname$shrext' + ;; + tpf*) + library_names_spec='$libname$shrext' + ;; + uts4*) + library_names_spec='$libname$shrext' + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that +# program. This Exception is an additional permission under section 7 +# of the GNU General Public License, version 3 ("GPLv3"). + + +# Please send patches to . +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# You can get the latest version of this script from: +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS + +Canonicalize a configuration name. + +Options: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright 1992-2019 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo "$1" + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Split fields of configuration type +# shellcheck disable=SC2162 +IFS="-" read field1 field2 field3 field4 <&2 + exit 1 + ;; + *-*-*-*) + basic_machine=$field1-$field2 + os=$field3-$field4 + ;; + *-*-*) + # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two + # parts + maybe_os=$field2-$field3 + case $maybe_os in + nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ + | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ + | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ + | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ + | storm-chaos* | os2-emx* | rtmk-nova*) + basic_machine=$field1 + os=$maybe_os + ;; + android-linux) + basic_machine=$field1-unknown + os=linux-android + ;; + *) + basic_machine=$field1-$field2 + os=$field3 + ;; + esac + ;; + *-*) + # A lone config we happen to match not fitting any pattern + case $field1-$field2 in + decstation-3100) + basic_machine=mips-dec + os= + ;; + *-*) + # Second component is usually, but not always the OS + case $field2 in + # Prevent following clause from handling this valid os + sun*os*) + basic_machine=$field1 + os=$field2 + ;; + # Manufacturers + dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ + | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ + | unicom* | ibm* | next | hp | isi* | apollo | altos* \ + | convergent* | ncr* | news | 32* | 3600* | 3100* \ + | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ + | ultra | tti* | harris | dolphin | highlevel | gould \ + | cbm | ns | masscomp | apple | axis | knuth | cray \ + | microblaze* | sim | cisco \ + | oki | wec | wrs | winbond) + basic_machine=$field1-$field2 + os= + ;; + *) + basic_machine=$field1 + os=$field2 + ;; + esac + ;; + esac + ;; + *) + # Convert single-component short-hands not valid as part of + # multi-component configurations. + case $field1 in + 386bsd) + basic_machine=i386-pc + os=bsd + ;; + a29khif) + basic_machine=a29k-amd + os=udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=scout + ;; + alliant) + basic_machine=fx80-alliant + os= + ;; + altos | altos3068) + basic_machine=m68k-altos + os= + ;; + am29k) + basic_machine=a29k-none + os=bsd + ;; + amdahl) + basic_machine=580-amdahl + os=sysv + ;; + amiga) + basic_machine=m68k-unknown + os= + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=bsd + ;; + aros) + basic_machine=i386-pc + os=aros + ;; + aux) + basic_machine=m68k-apple + os=aux + ;; + balance) + basic_machine=ns32k-sequent + os=dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=linux + ;; + cegcc) + basic_machine=arm-unknown + os=cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=bsd + ;; + convex-c2) + basic_machine=c2-convex + os=bsd + ;; + convex-c32) + basic_machine=c32-convex + os=bsd + ;; + convex-c34) + basic_machine=c34-convex + os=bsd + ;; + convex-c38) + basic_machine=c38-convex + os=bsd + ;; + cray) + basic_machine=j90-cray + os=unicos + ;; + crds | unos) + basic_machine=m68k-crds + os= + ;; + da30) + basic_machine=m68k-da30 + os= + ;; + decstation | pmax | pmin | dec3100 | decstatn) + basic_machine=mips-dec + os= + ;; + delta88) + basic_machine=m88k-motorola + os=sysv3 + ;; + dicos) + basic_machine=i686-pc + os=dicos + ;; + djgpp) + basic_machine=i586-pc + os=msdosdjgpp + ;; + ebmon29k) + basic_machine=a29k-amd + os=ebmon + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=ose + ;; + gmicro) + basic_machine=tron-gmicro + os=sysv + ;; + go32) + basic_machine=i386-pc + os=go32 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=hms + ;; + harris) + basic_machine=m88k-harris + os=sysv3 + ;; + hp300) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=hpux + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=proelf + ;; + i386mach) + basic_machine=i386-mach + os=mach + ;; + vsta) + basic_machine=i386-pc + os=vsta + ;; + isi68 | isi) + basic_machine=m68k-isi + os=sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=linux + ;; + magnum | m3230) + basic_machine=mips-mips + os=sysv + ;; + merlin) + basic_machine=ns32k-utek + os=sysv + ;; + mingw64) + basic_machine=x86_64-pc + os=mingw64 + ;; + mingw32) + basic_machine=i686-pc + os=mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=mingw32ce + ;; + monitor) + basic_machine=m68k-rom68k + os=coff + ;; + morphos) + basic_machine=powerpc-unknown + os=morphos + ;; + moxiebox) + basic_machine=moxie-unknown + os=moxiebox + ;; + msdos) + basic_machine=i386-pc + os=msdos + ;; + msys) + basic_machine=i686-pc + os=msys + ;; + mvs) + basic_machine=i370-ibm + os=mvs + ;; + nacl) + basic_machine=le32-unknown + os=nacl + ;; + ncr3000) + basic_machine=i486-ncr + os=sysv4 + ;; + netbsd386) + basic_machine=i386-pc + os=netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=newsos + ;; + news1000) + basic_machine=m68030-sony + os=newsos + ;; + necv70) + basic_machine=v70-nec + os=sysv + ;; + nh3000) + basic_machine=m68k-harris + os=cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=cxux + ;; + nindy960) + basic_machine=i960-intel + os=nindy + ;; + mon960) + basic_machine=i960-intel + os=mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=nonstopux + ;; + os400) + basic_machine=powerpc-ibm + os=os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=ose + ;; + os68k) + basic_machine=m68k-none + os=os68k + ;; + paragon) + basic_machine=i860-intel + os=osf + ;; + parisc) + basic_machine=hppa-unknown + os=linux + ;; + pw32) + basic_machine=i586-unknown + os=pw32 + ;; + rdos | rdos64) + basic_machine=x86_64-pc + os=rdos + ;; + rdos32) + basic_machine=i386-pc + os=rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=coff + ;; + sa29200) + basic_machine=a29k-amd + os=udi + ;; + sei) + basic_machine=mips-sei + os=seiux + ;; + sequent) + basic_machine=i386-sequent + os= + ;; + sps7) + basic_machine=m68k-bull + os=sysv2 + ;; + st2000) + basic_machine=m68k-tandem + os= + ;; + stratus) + basic_machine=i860-stratus + os=sysv4 + ;; + sun2) + basic_machine=m68000-sun + os= + ;; + sun2os3) + basic_machine=m68000-sun + os=sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=sunos4 + ;; + sun3) + basic_machine=m68k-sun + os= + ;; + sun3os3) + basic_machine=m68k-sun + os=sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=sunos4 + ;; + sun4) + basic_machine=sparc-sun + os= + ;; + sun4os3) + basic_machine=sparc-sun + os=sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=solaris2 + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + os= + ;; + sv1) + basic_machine=sv1-cray + os=unicos + ;; + symmetry) + basic_machine=i386-sequent + os=dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=unicos + ;; + t90) + basic_machine=t90-cray + os=unicos + ;; + toad1) + basic_machine=pdp10-xkl + os=tops20 + ;; + tpf) + basic_machine=s390x-ibm + os=tpf + ;; + udi29k) + basic_machine=a29k-amd + os=udi + ;; + ultra3) + basic_machine=a29k-nyu + os=sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=none + ;; + vaxv) + basic_machine=vax-dec + os=sysv + ;; + vms) + basic_machine=vax-dec + os=vms + ;; + vxworks960) + basic_machine=i960-wrs + os=vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=vxworks + ;; + xbox) + basic_machine=i686-pc + os=mingw32 + ;; + ymp) + basic_machine=ymp-cray + os=unicos + ;; + *) + basic_machine=$1 + os= + ;; + esac + ;; +esac + +# Decode 1-component or ad-hoc basic machines +case $basic_machine in + # Here we handle the default manufacturer of certain CPU types. It is in + # some cases the only manufacturer, in others, it is the most popular. + w89k) + cpu=hppa1.1 + vendor=winbond + ;; + op50n) + cpu=hppa1.1 + vendor=oki + ;; + op60c) + cpu=hppa1.1 + vendor=oki + ;; + ibm*) + cpu=i370 + vendor=ibm + ;; + orion105) + cpu=clipper + vendor=highlevel + ;; + mac | mpw | mac-mpw) + cpu=m68k + vendor=apple + ;; + pmac | pmac-mpw) + cpu=powerpc + vendor=apple + ;; + + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + cpu=m68000 + vendor=att + ;; + 3b*) + cpu=we32k + vendor=att + ;; + bluegene*) + cpu=powerpc + vendor=ibm + os=cnk + ;; + decsystem10* | dec10*) + cpu=pdp10 + vendor=dec + os=tops10 + ;; + decsystem20* | dec20*) + cpu=pdp10 + vendor=dec + os=tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + cpu=m68k + vendor=motorola + ;; + dpx2*) + cpu=m68k + vendor=bull + os=sysv3 + ;; + encore | umax | mmax) + cpu=ns32k + vendor=encore + ;; + elxsi) + cpu=elxsi + vendor=elxsi + os=${os:-bsd} + ;; + fx2800) + cpu=i860 + vendor=alliant + ;; + genix) + cpu=ns32k + vendor=ns + ;; + h3050r* | hiux*) + cpu=hppa1.1 + vendor=hitachi + os=hiuxwe2 + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + cpu=m68000 + vendor=hp + ;; + hp9k3[2-9][0-9]) + cpu=m68k + vendor=hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + cpu=hppa1.1 + vendor=hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + cpu=hppa1.0 + vendor=hp + ;; + i*86v32) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv32 + ;; + i*86v4*) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv4 + ;; + i*86v) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=sysv + ;; + i*86sol2) + cpu=`echo "$1" | sed -e 's/86.*/86/'` + vendor=pc + os=solaris2 + ;; + j90 | j90-cray) + cpu=j90 + vendor=cray + os=${os:-unicos} + ;; + iris | iris4d) + cpu=mips + vendor=sgi + case $os in + irix*) + ;; + *) + os=irix4 + ;; + esac + ;; + miniframe) + cpu=m68000 + vendor=convergent + ;; + *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) + cpu=m68k + vendor=atari + os=mint + ;; + news-3600 | risc-news) + cpu=mips + vendor=sony + os=newsos + ;; + next | m*-next) + cpu=m68k + vendor=next + case $os in + openstep*) + ;; + nextstep*) + ;; + ns2*) + os=nextstep2 + ;; + *) + os=nextstep3 + ;; + esac + ;; + np1) + cpu=np1 + vendor=gould + ;; + op50n-* | op60c-*) + cpu=hppa1.1 + vendor=oki + os=proelf + ;; + pa-hitachi) + cpu=hppa1.1 + vendor=hitachi + os=hiuxwe2 + ;; + pbd) + cpu=sparc + vendor=tti + ;; + pbb) + cpu=m68k + vendor=tti + ;; + pc532) + cpu=ns32k + vendor=pc532 + ;; + pn) + cpu=pn + vendor=gould + ;; + power) + cpu=power + vendor=ibm + ;; + ps2) + cpu=i386 + vendor=ibm + ;; + rm[46]00) + cpu=mips + vendor=siemens + ;; + rtpc | rtpc-*) + cpu=romp + vendor=ibm + ;; + sde) + cpu=mipsisa32 + vendor=sde + os=${os:-elf} + ;; + simso-wrs) + cpu=sparclite + vendor=wrs + os=vxworks + ;; + tower | tower-32) + cpu=m68k + vendor=ncr + ;; + vpp*|vx|vx-*) + cpu=f301 + vendor=fujitsu + ;; + w65) + cpu=w65 + vendor=wdc + ;; + w89k-*) + cpu=hppa1.1 + vendor=winbond + os=proelf + ;; + none) + cpu=none + vendor=none + ;; + leon|leon[3-9]) + cpu=sparc + vendor=$basic_machine + ;; + leon-*|leon[3-9]-*) + cpu=sparc + vendor=`echo "$basic_machine" | sed 's/-.*//'` + ;; + + *-*) + # shellcheck disable=SC2162 + IFS="-" read cpu vendor <&2 + exit 1 + ;; + esac + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $vendor in + digital*) + vendor=dec + ;; + commodore*) + vendor=cbm + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x$os != x ] +then +case $os in + # First match some system type aliases that might get confused + # with valid system types. + # solaris* is a basic system type, with this one exception. + auroraux) + os=auroraux + ;; + bluegene*) + os=cnk + ;; + solaris1 | solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + solaris) + os=solaris2 + ;; + unixware*) + os=sysv4.2uw + ;; + gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # es1800 is here to avoid being matched by es* (a different OS) + es1800*) + os=ose + ;; + # Some version numbers need modification + chorusos*) + os=chorusos + ;; + isc) + os=isc2.2 + ;; + sco6) + os=sco5v6 + ;; + sco5) + os=sco3.2v5 + ;; + sco4) + os=sco3.2v4 + ;; + sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + ;; + sco3.2v[4-9]* | sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + ;; + scout) + # Don't match below + ;; + sco*) + os=sco3.2v2 + ;; + psos*) + os=psos + ;; + # Now accept the basic system types. + # The portable systems comes first. + # Each alternative MUST end in a * to match a version number. + # sysv* is not here because it comes later, after sysvr4. + gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ + | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ + | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ + | sym* | kopensolaris* | plan9* \ + | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ + | aos* | aros* | cloudabi* | sortix* \ + | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ + | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ + | knetbsd* | mirbsd* | netbsd* \ + | bitrig* | openbsd* | solidbsd* | libertybsd* \ + | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ + | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ + | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ + | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ + | chorusrdb* | cegcc* | glidix* \ + | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ + | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ + | linux-newlib* | linux-musl* | linux-uclibc* \ + | uxpv* | beos* | mpeix* | udk* | moxiebox* \ + | interix* | uwin* | mks* | rhapsody* | darwin* \ + | openstep* | oskit* | conix* | pw32* | nonstopux* \ + | storm-chaos* | tops10* | tenex* | tops20* | its* \ + | os2* | vos* | palmos* | uclinux* | nucleus* \ + | morphos* | superux* | rtmk* | windiss* \ + | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ + | skyos* | haiku* | rdos* | toppers* | drops* | es* \ + | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ + | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + qnx*) + case $cpu in + x86 | i*86) + ;; + *) + os=nto-$os + ;; + esac + ;; + hiux*) + os=hiuxwe2 + ;; + nto-qnx*) + ;; + nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + sim | xray | os68k* | v88r* \ + | windows* | osx | abug | netware* | os9* \ + | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) + ;; + linux-dietlibc) + os=linux-dietlibc + ;; + linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + lynx*178) + os=lynxos178 + ;; + lynx*5) + os=lynxos5 + ;; + lynx*) + os=lynxos + ;; + mac*) + os=`echo "$os" | sed -e 's|mac|macos|'` + ;; + opened*) + os=openedition + ;; + os400*) + os=os400 + ;; + sunos5*) + os=`echo "$os" | sed -e 's|sunos5|solaris2|'` + ;; + sunos6*) + os=`echo "$os" | sed -e 's|sunos6|solaris3|'` + ;; + wince*) + os=wince + ;; + utek*) + os=bsd + ;; + dynix*) + os=bsd + ;; + acis*) + os=aos + ;; + atheos*) + os=atheos + ;; + syllable*) + os=syllable + ;; + 386bsd) + os=bsd + ;; + ctix* | uts*) + os=sysv + ;; + nova*) + os=rtmk-nova + ;; + ns2) + os=nextstep2 + ;; + nsk*) + os=nsk + ;; + # Preserve the version number of sinix5. + sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + sinix*) + os=sysv4 + ;; + tpf*) + os=tpf + ;; + triton*) + os=sysv3 + ;; + oss*) + os=sysv3 + ;; + svr4*) + os=sysv4 + ;; + svr3) + os=sysv3 + ;; + sysvr4) + os=sysv4 + ;; + # This must come after sysvr4. + sysv*) + ;; + ose*) + os=ose + ;; + *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) + os=mint + ;; + zvmoe) + os=zvmoe + ;; + dicos*) + os=dicos + ;; + pikeos*) + # Until real need of OS specific support for + # particular features comes up, bare metal + # configurations are quite functional. + case $cpu in + arm*) + os=eabi + ;; + *) + os=elf + ;; + esac + ;; + nacl*) + ;; + ios) + ;; + none) + ;; + *-eabi) + ;; + *) + echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $cpu-$vendor in + score-*) + os=elf + ;; + spu-*) + os=elf + ;; + *-acorn) + os=riscix1.2 + ;; + arm*-rebel) + os=linux + ;; + arm*-semi) + os=aout + ;; + c4x-* | tic4x-*) + os=coff + ;; + c8051-*) + os=elf + ;; + clipper-intergraph) + os=clix + ;; + hexagon-*) + os=elf + ;; + tic54x-*) + os=coff + ;; + tic55x-*) + os=coff + ;; + tic6x-*) + os=coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=tops20 + ;; + pdp11-*) + os=none + ;; + *-dec | vax-*) + os=ultrix4.2 + ;; + m68*-apollo) + os=domain + ;; + i386-sun) + os=sunos4.0.2 + ;; + m68000-sun) + os=sunos3 + ;; + m68*-cisco) + os=aout + ;; + mep-*) + os=elf + ;; + mips*-cisco) + os=elf + ;; + mips*-*) + os=elf + ;; + or1k-*) + os=-elf + ;; + or32-*) + os=coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=sysv3 + ;; + sparc-* | *-sun) + os=sunos4.1.1 + ;; + pru-*) + os=elf + ;; + *-be) + os=beos + ;; + *-ibm) + os=aix + ;; + *-knuth) + os=mmixware + ;; + *-wec) + os=proelf + ;; + *-winbond) + os=proelf + ;; + *-oki) + os=proelf + ;; + *-hp) + os=hpux + ;; + *-hitachi) + os=hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=sysv + ;; + *-cbm) + os=amigaos + ;; + *-dg) + os=dgux + ;; + *-dolphin) + os=sysv3 + ;; + m68k-ccur) + os=rtu + ;; + m88k-omron*) + os=luna + ;; + *-next) + os=nextstep + ;; + *-sequent) + os=ptx + ;; + *-crds) + os=unos + ;; + *-ns) + os=genix + ;; + i370-*) + os=mvs + ;; + *-gould) + os=sysv + ;; + *-highlevel) + os=bsd + ;; + *-encore) + os=bsd + ;; + *-sgi) + os=irix + ;; + *-siemens) + os=sysv4 + ;; + *-masscomp) + os=rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=uxpv + ;; + *-rom68k) + os=coff + ;; + *-*bug) + os=coff + ;; + *-apple) + os=macos + ;; + *-atari*) + os=mint + ;; + *-wrs) + os=vxworks + ;; + *) + os=none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +case $vendor in + unknown) + case $os in + riscix*) + vendor=acorn + ;; + sunos*) + vendor=sun + ;; + cnk*|-aix*) + vendor=ibm + ;; + beos*) + vendor=be + ;; + hpux*) + vendor=hp + ;; + mpeix*) + vendor=hp + ;; + hiux*) + vendor=hitachi + ;; + unos*) + vendor=crds + ;; + dgux*) + vendor=dg + ;; + luna*) + vendor=omron + ;; + genix*) + vendor=ns + ;; + clix*) + vendor=intergraph + ;; + mvs* | opened*) + vendor=ibm + ;; + os400*) + vendor=ibm + ;; + ptx*) + vendor=sequent + ;; + tpf*) + vendor=ibm + ;; + vxsim* | vxworks* | windiss*) + vendor=wrs + ;; + aux*) + vendor=apple + ;; + hms*) + vendor=hitachi + ;; + mpw* | macos*) + vendor=apple + ;; + *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) + vendor=atari + ;; + vos*) + vendor=stratus + ;; + esac + ;; +esac + +echo "$cpu-$vendor-$os" +exit + +# Local variables: +# eval: (add-hook 'before-save-hook 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/readline/readline/support/install.sh b/readline/readline/support/install.sh new file mode 100755 index 0000000000..0cac004e6d --- /dev/null +++ b/readline/readline/support/install.sh @@ -0,0 +1,247 @@ +#!/bin/sh +# +# install - install a program, script, or datafile +# This comes from X11R5. +# +# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ +# +# Copyright 1991 by the Massachusetts Institute of Technology +# +# Permission to use, copy, modify, distribute, and sell this software and its +# documentation for any purpose is hereby granted without fee, provided that +# the above copyright notice appear in all copies and that both that +# copyright notice and this permission notice appear in supporting +# documentation, and that the name of M.I.T. not be used in advertising or +# publicity pertaining to distribution of the software without specific, +# written prior permission. M.I.T. makes no representations about the +# suitability of this software for any purpose. It is provided "as is" +# without express or implied warranty. +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +tranformbasename="" +transform_arg="" +instcmd="$mvprog" +chmodcmd="$chmodprog 0755" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" +dir_arg="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + -t=*) transformarg=`echo $1 | sed 's/-t=//'` + shift + continue;; + + -b=*) transformbasename=`echo $1 | sed 's/-b=//'` + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + # this colon is to work around a 386BSD /bin/sh bug + : + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +else + true +fi + +if [ x"$dir_arg" != x ]; then + dst=$src + src="" + + if [ -d $dst ]; then + instcmd=: + else + instcmd=mkdir + fi +else + +# Waiting for this to be detected by the "$instcmd $src $dsttmp" command +# might cause directories to be created, which would be especially bad +# if $src (and thus $dsttmp) contains '*'. + + if [ -f $src -o -d $src ] + then + true + else + echo "install: $src does not exist" + exit 1 + fi + + if [ x"$dst" = x ] + then + echo "install: no destination specified" + exit 1 + else + true + fi + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + + if [ -d $dst ] + then + dst="$dst"/`basename $src` + else + true + fi +fi + +## this sed command emulates the dirname command +dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + +# Make sure that the destination directory exists. +# this part is taken from Noah Friedman's mkinstalldirs script + +# Skip lots of stat calls in the usual case. +if [ ! -d "$dstdir" ]; then +defaultIFS=' +' +IFS="${IFS-${defaultIFS}}" + +oIFS="${IFS}" +# Some sh's can't handle IFS=/ for some reason. +IFS='%' +set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS="${oIFS}" + +pathcomp='' + +while [ $# -ne 0 ] ; do + pathcomp="${pathcomp}${1}" + shift + + if [ ! -d "${pathcomp}" ] ; + then + $mkdirprog "${pathcomp}" + else + true + fi + + pathcomp="${pathcomp}/" +done +fi + +if [ x"$dir_arg" != x ] +then + $doit $instcmd $dst && + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi +else + +# If we're going to rename the final executable, determine the name now. + + if [ x"$transformarg" = x ] + then + dstfile=`basename $dst` + else + dstfile=`basename $dst $transformbasename | + sed $transformarg`$transformbasename + fi + +# don't allow the sed command to completely eliminate the filename + + if [ x"$dstfile" = x ] + then + dstfile=`basename $dst` + else + true + fi + +# Make a temp file name in the proper directory. + + dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + + $doit $instcmd $src $dsttmp && + + trap "rm -f ${dsttmp}" 0 && + +# and set any options; do chmod last to preserve setuid bits + +# If any of these fail, we abort the whole thing. If we want to +# ignore errors from any of these, just make sure not to ignore +# errors from the above "$doit $instcmd $src $dsttmp" command. + + if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && + +# Now rename the file to the real destination. + + $doit $rmcmd -f $dstdir/$dstfile && + $doit $mvcmd $dsttmp $dstdir/$dstfile + +fi && + + +exit 0 diff --git a/readline/readline/support/mkdirs b/readline/readline/support/mkdirs new file mode 100755 index 0000000000..46f656eaff --- /dev/null +++ b/readline/readline/support/mkdirs @@ -0,0 +1,47 @@ +#! /bin/sh +# +# mkdirs - a work-alike for `mkdir -p' +# +# Chet Ramey +# chet@po.cwru.edu + +# Copyright (C) 1996-2002 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +for dir +do + + test -d "$dir" && continue + + tomake=$dir + while test -n "$dir" ; do + # dir=${dir%/*} + # dir=`expr "$dir" ':' '\(/.*\)/[^/]*'` + if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then + tomake="$dir $tomake" + else + dir= + fi + done + + for d in $tomake + do + test -d "$d" && continue + echo mkdir "$d" + mkdir "$d" + done +done + +exit 0 diff --git a/readline/readline/support/mkdist b/readline/readline/support/mkdist new file mode 100755 index 0000000000..282431d4ad --- /dev/null +++ b/readline/readline/support/mkdist @@ -0,0 +1,129 @@ +#! /bin/bash - +# +# mkdist - make a distribution directory from a master manifest file +# +# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version +# +# SRCDIR defaults to src +# MANIFEST defaults to $SRCDIR/MANIFEST +# +# Chet Ramey +# chet@po.cwru.edu + +# Copyright (C) 1996-2002 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +SRCDIR=src +ROOTNAME=bash + +usage() +{ + echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version 1>&2 + exit 2 +} + +vmsg() +{ + if [ -n "$verbose" ]; then + echo mkdist: "$@" + fi +} + +while getopts m:s:r:tv name +do + case $name in + m) MANIFEST=$OPTARG ;; + s) SRCDIR=$OPTARG ;; + r) ROOTNAME=$OPTARG ;; + t) maketar=yes ;; + v) verbose=yes ;; + ?) usage ;; + esac +done + +: ${MANIFEST:=$SRCDIR/MANIFEST} + +vmsg using $MANIFEST + +shift $(( $OPTIND - 1 )) + +if [ $# -lt 1 ]; then + usage +fi + +version=$1 +newdir=${ROOTNAME}-$version + +tarfile=${newdir}.tar + +vmsg creating distribution for $ROOTNAME version $version in $newdir + +if [ ! -d $newdir ]; then + mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; } +fi + +dirmode=755 +filmode=644 + +while read fname type mode +do + [ -z "$fname" ] && continue + + case "$fname" in + \#*) continue ;; + esac + + case "$type" in + d) mkdir $newdir/$fname ;; + f) cp -p $SRCDIR/$fname $newdir/$fname ;; + s) ln -s $mode $newdir/$fname ; mode= ;; # symlink + l) ln $mode $newdir/$fname ; mode= ;; # hard link + *) echo "unknown file type $type" 1>&2 ;; + esac + + if [ -n "$mode" ]; then + chmod $mode $newdir/$fname + fi + +done < $MANIFEST + +# cut off the `-alpha' in something like `2.0-alpha', leaving just the +# numeric version +#version=${version%%-*} + +#case "$version" in +#*.*.*) vers=${version%.*} ;; +#*.*) vers=${version} ;; +#esac + +#echo $vers > $newdir/.distribution + +#case "$version" in +#*.*.*) plevel=${version##*.} ;; +#*) plevel=0 ;; +#esac +#[ -z "$plevel" ] && plevel=0 +#echo ${plevel} > $newdir/.patchlevel + +vmsg $newdir created + +if [ -n "$maketar" ]; then + tar cf ${tarfile} $newdir + gzip $tarfile + vmsg ${tarfile}.gz created +fi + +exit 0 diff --git a/readline/readline/support/mkinstalldirs b/readline/readline/support/mkinstalldirs new file mode 100755 index 0000000000..d2d5f21b61 --- /dev/null +++ b/readline/readline/support/mkinstalldirs @@ -0,0 +1,111 @@ +#! /bin/sh +# mkinstalldirs --- make directory hierarchy +# Author: Noah Friedman +# Created: 1993-05-16 +# Public domain + +errstatus=0 +dirmode="" + +usage="\ +Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." + +# process command line arguments +while test $# -gt 0 ; do + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac +done + +for file +do + if test -d "$file"; then + shift + else + break + fi +done + +case $# in + 0) exit 0 ;; +esac + +case $dirmode in + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; +esac + +for file +do + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift + + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi + + pathcomp="$pathcomp/" + done +done + +exit $errstatus + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# End: +# mkinstalldirs ends here diff --git a/readline/readline/support/shlib-install b/readline/readline/support/shlib-install new file mode 100755 index 0000000000..f4eea278fa --- /dev/null +++ b/readline/readline/support/shlib-install @@ -0,0 +1,206 @@ +#! /bin/sh +# +# shlib-install - install a shared library and do any necessary host-specific +# post-installation configuration (like ldconfig) +# +# usage: shlib-install [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library +# +# Chet Ramey +# chet@po.cwru.edu + +# +# defaults +# +INSTALLDIR=/usr/local/lib +LDCONFIG=ldconfig + +PROGNAME=`basename $0` +USAGE="$PROGNAME [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library" + +# process options + +while [ $# -gt 0 ]; do + case "$1" in + -O) shift; host_os="$1"; shift ;; + -V) shift; host_vendor="$1"; shift ;; + -d) shift; INSTALLDIR="$1"; shift ;; + -b) shift; BINDIR="$1" ; shift ;; + -i) shift; INSTALLPROG="$1" ; shift ;; + -D) echo=echo ; shift ;; + -U) uninstall=true ; shift ;; + -*) echo "$USAGE" >&2 ; exit 2;; + *) break ;; + esac +done + +# set install target name +LIBNAME="$1" + +if [ -z "$LIBNAME" ]; then + echo "$USAGE" >&2 + exit 2 +fi + +OLDSUFF=old +MV=mv +RM="rm -f" +LN="ln -s" + +# pre-install + +if [ -z "$uninstall" ]; then + ${echo} $RM ${INSTALLDIR}/${LIBNAME}.${OLDSUFF} + if [ -f "$INSTALLDIR/$LIBNAME" ]; then + ${echo} $MV $INSTALLDIR/$LIBNAME ${INSTALLDIR}/${LIBNAME}.${OLDSUFF} + fi +fi + +# install/uninstall + +if [ -z "$uninstall" ] ; then + ${echo} eval ${INSTALLPROG} $LIBNAME ${INSTALLDIR}/${LIBNAME} +else + ${echo} ${RM} ${INSTALLDIR}/${LIBNAME} +fi + +# post-install/uninstall + +# HP-UX and Darwin/MacOS X require that a shared library have execute permission +# Linux does, too, and ldd warns about it. Solaris doesn't seem to mind, +# but ldd still warns about it. +# Cygwin installs both a dll (which must go in $BINDIR) and an implicit +# link library (in $libdir) +case "$host_os" in +hpux*|darwin*|macosx*|linux*|solaris2*) + if [ -z "$uninstall" ]; then + chmod 755 ${INSTALLDIR}/${LIBNAME} + fi ;; +cygwin*|mingw*) + IMPLIBNAME=`echo ${LIBNAME} \ + | sed -e 's,^cyg,lib,' -e 's,[0-9]*.dll$,.dll.a,'` + if [ -z "$uninstall" ]; then + ${echo} $RM ${BINDIR}/${LIBNAME}.${OLDSUFF} + if [ -f "$BINDIR/$LIBNAME" ]; then + ${echo} $MV $BINDIR/$LIBNAME $BINDIR/$LIBNAME.$OLDSUFF + fi + ${echo} $MV ${INSTALLDIR}/${LIBNAME} ${BINDIR}/${LIBNAME} + ${echo} chmod a+x ${BINDIR}/${LIBNAME} + ${echo} eval ${INSTALLPROG} ${LIBNAME}.a \ + ${INSTALLDIR}/${IMPLIBNAME} + else + ${echo} ${RM} ${BINDIR}/${LIBNAME} + ${echo} ${RM} ${INSTALLDIR}/${IMPLIBNAME} + fi ;; + +*) ;; +esac + +case "$LIBNAME" in +*.*.[0-9].[0-9]) # libname.so.M.N + LINK2=`echo $LIBNAME | sed 's:\(.*\..*\.[0-9]\)\.[0-9]:\1:'` # libname.so.M + LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]\.[0-9]:\1:'` # libname.so + ;; +*.*.[0-9]) # libname.so.M + LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]:\1:'` # libname.so + ;; +*.[0-9]) # libname.M + LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]:\1:'` # libname + ;; +*.[0-9].[0-9].dylib) # libname.M.N.dylib + LINK2=`echo $LIBNAME | sed 's:\(.*\.[0-9]\)\.[0-9]:\1:'` # libname.M.dylib + LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]\.[0-9]:\1:'` # libname.dylib +esac + +INSTALL_LINK1='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK1' +INSTALL_LINK2='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK2' + +# +# Create symlinks to the installed library. This section is incomplete. +# +case "$host_os-$host_vendor" in +*linux*|freebsd*-gentoo) + # libname.so.M -> libname.so.M.N + ${echo} ${RM} ${INSTALLDIR}/$LINK2 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK2 + fi + + # libname.so -> libname.so.M + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + ${echo} cd $INSTALLDIR && ${echo} ${LN} $LINK2 $LINK1 + fi + ;; + +bsdi4*|*gnu*|darwin*|macosx*|netbsd*|mirbsd*) + # libname.so.M -> libname.so.M.N + ${echo} ${RM} ${INSTALLDIR}/$LINK2 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK2 + fi + + # libname.so -> libname.so.M.N + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + ;; + +solaris2*|aix4.[2-9]*|aix[5-9]*|osf*|irix[56]*|sysv[45]*|dgux*|interix*) + # libname.so -> libname.so.M + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + ;; + + +# FreeBSD 3.x and above can have either a.out or ELF shared libraries +freebsd3*|freebsdaout*) + if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then + # libname.so -> libname.so.M + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + else + # libname.so.M -> libname.so.M.N + ${echo} ${RM} ${INSTALLDIR}/$LINK2 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK2 + fi + + # libname.so -> libname.so.M.N + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + fi + ;; + +freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*) + # libname.so -> libname.so.M + ${echo} ${RM} ${INSTALLDIR}/$LINK1 + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + ;; + +hpux1*) + # libname.sl -> libname.M + ${echo} ${RM} ${INSTALLDIR}/$LINK1.sl + if [ -z "$uninstall" ]; then + eval $INSTALL_LINK1 + fi + ;; + +cygwin*|mingw*) + # Links to .dlls don't work. Hence shobj-conf used DLLVERSION.dll + # instead of so.SHLIB_MAJOR.SHLIB_MINOR. The postinstall above + # took care of everything else. + ;; + +*) ;; +esac + +exit 0 diff --git a/readline/readline/support/shobj-conf b/readline/readline/support/shobj-conf new file mode 100755 index 0000000000..7920f1b5cb --- /dev/null +++ b/readline/readline/support/shobj-conf @@ -0,0 +1,594 @@ +#! /bin/sh +# +# shobj-conf -- output a series of variable assignments to be substituted +# into a Makefile by configure which specify system-dependent +# information for creating shared objects that may be loaded +# into bash with `enable -f' +# +# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor +# +# Chet Ramey +# chet@po.cwru.edu + +# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# +# This file is part of GNU Bash, the Bourne Again SHell. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +# +# defaults +# +SHOBJ_STATUS=supported +SHLIB_STATUS=supported + +SHOBJ_CC=cc +SHOBJ_CFLAGS= +SHOBJ_LD= +SHOBJ_LDFLAGS= +SHOBJ_XLDFLAGS= +SHOBJ_LIBS= + +SHLIB_XLDFLAGS= +SHLIB_LIBS= + +SHLIB_DOT='.' +SHLIB_LIBPREF='lib' +SHLIB_LIBSUFF='so' + +SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)' +SHLIB_DLLVERSION='$(SHLIB_MAJOR)' + +PROGNAME=`basename $0` +USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor" + +while [ $# -gt 0 ]; do + case "$1" in + -C) shift; SHOBJ_CC="$1"; shift ;; + -c) shift; host_cpu="$1"; shift ;; + -o) shift; host_os="$1"; shift ;; + -v) shift; host_vendor="$1"; shift ;; + *) echo "$USAGE" >&2 ; exit 2;; + esac +done + +case "${host_os}-${SHOBJ_CC}-${host_vendor}" in +nsk-cc-tandem) + SHOBJ_CFLAGS=-Wglobalized + case `uname -m` in + NSR*) + SHOBJ_CFLAGS="${SHOBJ_CFLAGS} -Wcall_shared" # default on TNS/E, needed on TNS/R + SHOBJ_LD=/usr/bin/ld # for TNS/R + ;; + NSE*|NEO*) + SHOBJ_LD=/usr/bin/eld + ;; + esac + SHOBJ_LDFLAGS='-shared -bglobalized -unres_symbols ignore' + ;; + +sunos4*-*gcc*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD=/usr/bin/ld + SHOBJ_LDFLAGS='-assert pure-text' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +sunos4*) + SHOBJ_CFLAGS=-pic + SHOBJ_LD=/usr/bin/ld + SHOBJ_LDFLAGS='-assert pure-text' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +sunos5*-*gcc*|solaris2*-*gcc*) + SHOBJ_LD='${CC}' + ld_used=`gcc -print-prog-name=ld` + if ${ld_used} -V 2>&1 | grep GNU >/dev/null 2>&1; then + # This line works for the GNU ld + SHOBJ_LDFLAGS='-shared -Wl,-h,$@' + # http://sourceware.org/ml/binutils/2001-08/msg00361.html + SHOBJ_CFLAGS=-fPIC + else + # This line works for the Solaris linker in /usr/ccs/bin/ld + SHOBJ_LDFLAGS='-shared -Wl,-i -Wl,-h,$@' + SHOBJ_CFLAGS=-fpic + fi + +# SHLIB_XLDFLAGS='-R $(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sunos5*|solaris2*) + SHOBJ_CFLAGS='-K pic' + SHOBJ_LD=/usr/ccs/bin/ld + SHOBJ_LDFLAGS='-G -dy -z text -i -h $@' + +# SHLIB_XLDFLAGS='-R $(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +# All versions of Linux (including Gentoo/FreeBSD) or the semi-mythical GNU Hurd. +linux*-*|gnu*-*|k*bsd*-gnu-*|freebsd*-gentoo) + SHOBJ_CFLAGS=-fPIC + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + + SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir) -Wl,-soname,`basename $@ $(SHLIB_MINOR)`' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +freebsd2*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-x -Bshareable' + + SHLIB_XLDFLAGS='-R$(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +# FreeBSD-3.x ELF +freebsd3*|freebsdaout*) + SHOBJ_CFLAGS=-fPIC + SHOBJ_LD='${CC}' + + if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + + SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + else + SHOBJ_LDFLAGS='-shared' + + SHLIB_XLDFLAGS='-R$(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + fi + ;; + +# FreeBSD-4.x and later have only ELF +freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*) + SHOBJ_CFLAGS=-fPIC + SHOBJ_LD='${CC}' + + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +# Darwin/MacOS X +darwin*) + # Common definitions for all darwin/mac os x versions + SHOBJ_CFLAGS='-fno-common' + + SHOBJ_LD='${CC}' + + SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)' + SHLIB_LIBSUFF='dylib' + + # unused at this time + SHLIB_SONAME='$(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF)' + + case "${host_os}" in + # Darwin versions 1, 5, 6, 7 correspond to Mac OS X 10.0, 10.1, 10.2, + # and 10.3, respectively. + darwin[1-7].*) + SHOBJ_STATUS=unsupported + SHOBJ_LDFLAGS='-dynamic' + SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v' + ;; + # Darwin 8 == Mac OS X 10.4; Mac OS X 10.N == Darwin N+4 + *) + case "${host_os}" in + darwin[89]*|darwin1[012]*) + SHOBJ_ARCHFLAGS='-arch_only `/usr/bin/arch`' + ;; + *) # Mac OS X 10.9 (Mavericks) and later + SHOBJ_ARCHFLAGS= + # for 32 and 64bit universal library + #SHOBJ_ARCHFLAGS='-arch i386 -arch x86_64' + #SHOBJ_CFLAGS=${SHOBJ_CFLAGS}' -arch i386 -arch x86_64' + ;; + esac + SHOBJ_LDFLAGS="-dynamiclib -dynamic -undefined dynamic_lookup ${SHOBJ_ARCHFLAGS}" + SHLIB_XLDFLAGS="-dynamiclib ${SHOBJ_ARCHFLAGS}"' -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v' + ;; + esac + + SHLIB_LIBS='-lncurses' # see if -lcurses works on MacOS X 10.1 + ;; + +openbsd*|netbsd*|mirbsd*) + SHOBJ_CFLAGS=-fPIC + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_XLDFLAGS='-R$(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +bsdi2*) + SHOBJ_CC=shlicc2 + SHOBJ_CFLAGS= + SHOBJ_LD=ld + SHOBJ_LDFLAGS=-r + SHOBJ_LIBS=-lc_s.2.1.0 + + # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in + # the ass -- they require changing {/usr/lib,etc}/shlib.map on + # each system, and the library creation process is byzantine + SHLIB_STATUS=unsupported + ;; + +bsdi3*) + SHOBJ_CC=shlicc2 + SHOBJ_CFLAGS= + SHOBJ_LD=ld + SHOBJ_LDFLAGS=-r + SHOBJ_LIBS=-lc_s.3.0.0 + + # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in + # the ass -- they require changing {/usr/lib,etc}/shlib.map on + # each system, and the library creation process is byzantine + SHLIB_STATUS=unsupported + ;; + +bsdi4*) + # BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked + # shared libraries. gcc 2.x is the standard compiler, and the + # `normal' gcc options should work as they do in Linux. + + SHOBJ_CFLAGS=-fPIC + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + + SHLIB_XLDFLAGS='-Wl,-soname,`basename $@ $(SHLIB_MINOR)`' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' + ;; + +osf*-*gcc*) + # Fix to use gcc linker driver from bfischer@TechFak.Uni-Bielefeld.DE + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + + SHLIB_XLDFLAGS='-rpath $(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +osf*) + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"' + + SHLIB_XLDFLAGS='-rpath $(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +aix4.[2-9]*-*gcc*|aix[5-9].*-*gcc*) # lightly tested by jik@cisco.com + SHOBJ_CFLAGS=-fpic + SHOBJ_LD='ld' + SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall' + SHOBJ_XLDFLAGS='-G' + + SHLIB_XLDFLAGS='-bM:SRE' + SHLIB_LIBS='-lcurses -lc' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +aix4.[2-9]*|aix[5-9].*) + SHOBJ_CFLAGS=-K + SHOBJ_LD='ld' + SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall' + SHOBJ_XLDFLAGS='-G' + + SHLIB_XLDFLAGS='-bM:SRE' + SHLIB_LIBS='-lcurses -lc' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +# +# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface +# +irix[56]*-*gcc*) + SHOBJ_CFLAGS='-fpic' + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' + + SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +irix[56]*) + SHOBJ_CFLAGS='-K PIC' + SHOBJ_LD=ld +# SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@' +# Change from David Kaelbling . If you have problems, +# remove the `-no_unresolved' + SHOBJ_LDFLAGS='-shared -no_unresolved -soname $@' + + SHLIB_XLDFLAGS='-rpath $(libdir)' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +hpux9*-*gcc*) + # must use gcc; the bundled cc cannot compile PIC code + SHOBJ_CFLAGS='-fpic' + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s' + + SHLIB_XLDFLAGS='-Wl,+b,$(libdir)' + SHLIB_LIBSUFF='sl' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +hpux9*) + SHOBJ_STATUS=unsupported + SHLIB_STATUS=unsupported + + # If you are using the HP ANSI C compiler, you can uncomment and use + # this code (I have not tested it) +# SHOBJ_STATUS=supported +# SHLIB_STATUS=supported +# +# SHOBJ_CFLAGS='+z' +# SHOBJ_LD='ld' +# SHOBJ_LDFLAGS='-b +s' +# +# SHLIB_XLDFLAGS='+b $(libdir)' +# SHLIB_LIBSUFF='sl' +# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + + ;; + +hpux10*-*gcc*) + # must use gcc; the bundled cc cannot compile PIC code + SHOBJ_CFLAGS='-fpic' + SHOBJ_LD='${CC}' + # if you have problems linking here, moving the `-Wl,+h,$@' from + # SHLIB_XLDFLAGS to SHOBJ_LDFLAGS has been reported to work + SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s' + + SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)' + SHLIB_LIBSUFF='sl' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +hpux10*) + SHOBJ_STATUS=unsupported + SHLIB_STATUS=unsupported + + # If you are using the HP ANSI C compiler, you can uncomment and use + # this code (I have not tested it) +# SHOBJ_STATUS=supported +# SHLIB_STATUS=supported +# +# SHOBJ_CFLAGS='+z' +# SHOBJ_LD='ld' +# SHOBJ_LDFLAGS='-b +s +h $@' +# +# SHLIB_XLDFLAGS='+b $(libdir)' +# SHLIB_LIBSUFF='sl' +# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + + ;; + +hpux11*-*gcc*) + # must use gcc; the bundled cc cannot compile PIC code + SHOBJ_CFLAGS='-fpic' + SHOBJ_LD='${CC}' +# SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@' + SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s -Wl,+h,$@' + + SHLIB_XLDFLAGS='-Wl,+b,$(libdir)' + SHLIB_LIBSUFF='sl' + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +hpux11*) + SHOBJ_STATUS=unsupported + SHLIB_STATUS=unsupported + + # If you are using the HP ANSI C compiler, you can uncomment and use + # this code (I have not tested it) +# SHOBJ_STATUS=supported +# SHLIB_STATUS=supported +# +# SHOBJ_CFLAGS='+z' +# SHOBJ_LD='ld' +# SHOBJ_LDFLAGS='-b +s +h $@' +# +# SHLIB_XLDFLAGS='+b $(libdir)' +# SHLIB_LIBSUFF='sl' +# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + + ;; + +sysv4*-*gcc*) + SHOBJ_CFLAGS=-shared + SHOBJ_LDFLAGS='-shared -h $@' + SHOBJ_LD='${CC}' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv4*) + SHOBJ_CFLAGS='-K PIC' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-dy -z text -G -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sco3.2v5*-*gcc*) + SHOBJ_CFLAGS='-fpic' # DEFAULTS TO ELF + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sco3.2v5*) + SHOBJ_CFLAGS='-K pic -b elf' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5uw7*-*gcc*) + SHOBJ_CFLAGS='-fpic' + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5uw7*) + SHOBJ_CFLAGS='-K PIC' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-G -dy -z text -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5UnixWare*-*gcc*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5UnixWare*) + SHOBJ_CFLAGS='-K PIC' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-G -dy -z text -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5OpenUNIX*-*gcc*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +sysv5OpenUNIX*) + SHOBJ_CFLAGS='-K PIC' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-G -dy -z text -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +dgux*-*gcc*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +dgux*) + SHOBJ_CFLAGS='-K pic' + SHOBJ_LD=ld + SHOBJ_LDFLAGS='-G -dy -h $@' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +msdos*) + SHOBJ_STATUS=unsupported + SHLIB_STATUS=unsupported + ;; + +cygwin*) + SHOBJ_LD='$(CC)' + SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a' + SHLIB_LIBPREF='cyg' + SHLIB_LIBSUFF='dll' + SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)' + SHLIB_LIBS='$(TERMCAP_LIB)' + + SHLIB_DOT= + # For official cygwin releases, DLLVERSION will be defined in the + # environment of configure, and will be incremented any time the API + # changes in a non-backwards compatible manner. Otherwise, it is just + # SHLIB_MAJOR. + if [ -n "$DLLVERSION" ] ; then + SHLIB_DLLVERSION="$DLLVERSION" + fi + ;; + +mingw*) + SHOBJ_LD='$(CC)' + SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a' + SHLIB_LIBSUFF='dll' + SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)' + SHLIB_LIBS='$(TERMCAP_LIB)' + + SHLIB_DOT= + # For official cygwin releases, DLLVERSION will be defined in the + # environment of configure, and will be incremented any time the API + # changes in a non-backwards compatible manner. Otherwise, it is just + # SHLIB_MAJOR. + if [ -n "$DLLVERSION" ] ; then + SHLIB_DLLVERSION="$DLLVERSION" + fi + ;; + +# +# Rely on correct gcc configuration for everything else +# +*-*gcc*) + SHOBJ_CFLAGS=-fpic + SHOBJ_LD='${CC}' + SHOBJ_LDFLAGS='-shared' + + SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' + ;; + +*) + SHOBJ_STATUS=unsupported + SHLIB_STATUS=unsupported + ;; + +esac + +echo SHOBJ_CC=\'"$SHOBJ_CC"\' +echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\' +echo SHOBJ_LD=\'"$SHOBJ_LD"\' +echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\' +echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\' +echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\' + +echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\' +echo SHLIB_LIBS=\'"$SHLIB_LIBS"\' + +echo SHLIB_DOT=\'"$SHLIB_DOT"\' + +echo SHLIB_LIBPREF=\'"$SHLIB_LIBPREF"\' +echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\' + +echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\' +echo SHLIB_DLLVERSION=\'"$SHLIB_DLLVERSION"\' + +echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\' +echo SHLIB_STATUS=\'"$SHLIB_STATUS"\' + +exit 0 diff --git a/readline/readline/support/wcwidth.c b/readline/readline/support/wcwidth.c new file mode 100644 index 0000000000..0f5ec99579 --- /dev/null +++ b/readline/readline/support/wcwidth.c @@ -0,0 +1,313 @@ +/* + * This is an implementation of wcwidth() and wcswidth() (defined in + * IEEE Std 1002.1-2001) for Unicode. + * + * http://www.opengroup.org/onlinepubs/007904975/functions/wcwidth.html + * http://www.opengroup.org/onlinepubs/007904975/functions/wcswidth.html + * + * In fixed-width output devices, Latin characters all occupy a single + * "cell" position of equal width, whereas ideographic CJK characters + * occupy two such cells. Interoperability between terminal-line + * applications and (teletype-style) character terminals using the + * UTF-8 encoding requires agreement on which character should advance + * the cursor by how many cell positions. No established formal + * standards exist at present on which Unicode character shall occupy + * how many cell positions on character terminals. These routines are + * a first attempt of defining such behavior based on simple rules + * applied to data provided by the Unicode Consortium. + * + * For some graphical characters, the Unicode standard explicitly + * defines a character-cell width via the definition of the East Asian + * FullWidth (F), Wide (W), Half-width (H), and Narrow (Na) classes. + * In all these cases, there is no ambiguity about which width a + * terminal shall use. For characters in the East Asian Ambiguous (A) + * class, the width choice depends purely on a preference of backward + * compatibility with either historic CJK or Western practice. + * Choosing single-width for these characters is easy to justify as + * the appropriate long-term solution, as the CJK practice of + * displaying these characters as double-width comes from historic + * implementation simplicity (8-bit encoded characters were displayed + * single-width and 16-bit ones double-width, even for Greek, + * Cyrillic, etc.) and not any typographic considerations. + * + * Much less clear is the choice of width for the Not East Asian + * (Neutral) class. Existing practice does not dictate a width for any + * of these characters. It would nevertheless make sense + * typographically to allocate two character cells to characters such + * as for instance EM SPACE or VOLUME INTEGRAL, which cannot be + * represented adequately with a single-width glyph. The following + * routines at present merely assign a single-cell width to all + * neutral characters, in the interest of simplicity. This is not + * entirely satisfactory and should be reconsidered before + * establishing a formal standard in this area. At the moment, the + * decision which Not East Asian (Neutral) characters should be + * represented by double-width glyphs cannot yet be answered by + * applying a simple rule from the Unicode database content. Setting + * up a proper standard for the behavior of UTF-8 character terminals + * will require a careful analysis not only of each Unicode character, + * but also of each presentation form, something the author of these + * routines has avoided to do so far. + * + * http://www.unicode.org/unicode/reports/tr11/ + * + * Markus Kuhn -- 2007-05-26 (Unicode 5.0) + * + * Permission to use, copy, modify, and distribute this software + * for any purpose and without fee is hereby granted. The author + * disclaims all warranties with regard to this software. + * + * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c + */ + +#ifdef __GO32__ +# include +#endif + +#include + +struct interval { + int first; + int last; +}; + +/* auxiliary function for binary search in interval table */ +static int bisearch(wchar_t ucs, const struct interval *table, int max) { + int min = 0; + int mid; + + if (ucs < table[0].first || ucs > table[max].last) + return 0; + while (max >= min) { + mid = (min + max) / 2; + if (ucs > table[mid].last) + min = mid + 1; + else if (ucs < table[mid].first) + max = mid - 1; + else + return 1; + } + + return 0; +} + + +/* The following two functions define the column width of an ISO 10646 + * character as follows: + * + * - The null character (U+0000) has a column width of 0. + * + * - Other C0/C1 control characters and DEL will lead to a return + * value of -1. + * + * - Non-spacing and enclosing combining characters (general + * category code Mn or Me in the Unicode database) have a + * column width of 0. + * + * - SOFT HYPHEN (U+00AD) has a column width of 1. + * + * - Other format characters (general category code Cf in the Unicode + * database) and ZERO WIDTH SPACE (U+200B) have a column width of 0. + * + * - Hangul Jamo medial vowels and final consonants (U+1160-U+11FF) + * have a column width of 0. + * + * - Spacing characters in the East Asian Wide (W) or East Asian + * Full-width (F) category as defined in Unicode Technical + * Report #11 have a column width of 2. + * + * - All remaining characters (including all printable + * ISO 8859-1 and WGL4 characters, Unicode control characters, + * etc.) have a column width of 1. + * + * This implementation assumes that wchar_t characters are encoded + * in ISO 10646. + */ + +int mk_wcwidth(wchar_t ucs) +{ + /* sorted list of non-overlapping intervals of non-spacing characters */ + /* generated by "uniset +cat=Me +cat=Mn +cat=Cf -00AD +1160-11FF +200B c" */ + static const struct interval combining[] = { + { 0x0300, 0x036F }, { 0x0483, 0x0486 }, { 0x0488, 0x0489 }, + { 0x0591, 0x05BD }, { 0x05BF, 0x05BF }, { 0x05C1, 0x05C2 }, + { 0x05C4, 0x05C5 }, { 0x05C7, 0x05C7 }, { 0x0600, 0x0603 }, + { 0x0610, 0x0615 }, { 0x064B, 0x065E }, { 0x0670, 0x0670 }, + { 0x06D6, 0x06E4 }, { 0x06E7, 0x06E8 }, { 0x06EA, 0x06ED }, + { 0x070F, 0x070F }, { 0x0711, 0x0711 }, { 0x0730, 0x074A }, + { 0x07A6, 0x07B0 }, { 0x07EB, 0x07F3 }, { 0x0901, 0x0902 }, + { 0x093C, 0x093C }, { 0x0941, 0x0948 }, { 0x094D, 0x094D }, + { 0x0951, 0x0954 }, { 0x0962, 0x0963 }, { 0x0981, 0x0981 }, + { 0x09BC, 0x09BC }, { 0x09C1, 0x09C4 }, { 0x09CD, 0x09CD }, + { 0x09E2, 0x09E3 }, { 0x0A01, 0x0A02 }, { 0x0A3C, 0x0A3C }, + { 0x0A41, 0x0A42 }, { 0x0A47, 0x0A48 }, { 0x0A4B, 0x0A4D }, + { 0x0A70, 0x0A71 }, { 0x0A81, 0x0A82 }, { 0x0ABC, 0x0ABC }, + { 0x0AC1, 0x0AC5 }, { 0x0AC7, 0x0AC8 }, { 0x0ACD, 0x0ACD }, + { 0x0AE2, 0x0AE3 }, { 0x0B01, 0x0B01 }, { 0x0B3C, 0x0B3C }, + { 0x0B3F, 0x0B3F }, { 0x0B41, 0x0B43 }, { 0x0B4D, 0x0B4D }, + { 0x0B56, 0x0B56 }, { 0x0B82, 0x0B82 }, { 0x0BC0, 0x0BC0 }, + { 0x0BCD, 0x0BCD }, { 0x0C3E, 0x0C40 }, { 0x0C46, 0x0C48 }, + { 0x0C4A, 0x0C4D }, { 0x0C55, 0x0C56 }, { 0x0CBC, 0x0CBC }, + { 0x0CBF, 0x0CBF }, { 0x0CC6, 0x0CC6 }, { 0x0CCC, 0x0CCD }, + { 0x0CE2, 0x0CE3 }, { 0x0D41, 0x0D43 }, { 0x0D4D, 0x0D4D }, + { 0x0DCA, 0x0DCA }, { 0x0DD2, 0x0DD4 }, { 0x0DD6, 0x0DD6 }, + { 0x0E31, 0x0E31 }, { 0x0E34, 0x0E3A }, { 0x0E47, 0x0E4E }, + { 0x0EB1, 0x0EB1 }, { 0x0EB4, 0x0EB9 }, { 0x0EBB, 0x0EBC }, + { 0x0EC8, 0x0ECD }, { 0x0F18, 0x0F19 }, { 0x0F35, 0x0F35 }, + { 0x0F37, 0x0F37 }, { 0x0F39, 0x0F39 }, { 0x0F71, 0x0F7E }, + { 0x0F80, 0x0F84 }, { 0x0F86, 0x0F87 }, { 0x0F90, 0x0F97 }, + { 0x0F99, 0x0FBC }, { 0x0FC6, 0x0FC6 }, { 0x102D, 0x1030 }, + { 0x1032, 0x1032 }, { 0x1036, 0x1037 }, { 0x1039, 0x1039 }, + { 0x1058, 0x1059 }, { 0x1160, 0x11FF }, { 0x135F, 0x135F }, + { 0x1712, 0x1714 }, { 0x1732, 0x1734 }, { 0x1752, 0x1753 }, + { 0x1772, 0x1773 }, { 0x17B4, 0x17B5 }, { 0x17B7, 0x17BD }, + { 0x17C6, 0x17C6 }, { 0x17C9, 0x17D3 }, { 0x17DD, 0x17DD }, + { 0x180B, 0x180D }, { 0x18A9, 0x18A9 }, { 0x1920, 0x1922 }, + { 0x1927, 0x1928 }, { 0x1932, 0x1932 }, { 0x1939, 0x193B }, + { 0x1A17, 0x1A18 }, { 0x1B00, 0x1B03 }, { 0x1B34, 0x1B34 }, + { 0x1B36, 0x1B3A }, { 0x1B3C, 0x1B3C }, { 0x1B42, 0x1B42 }, + { 0x1B6B, 0x1B73 }, { 0x1DC0, 0x1DCA }, { 0x1DFE, 0x1DFF }, + { 0x200B, 0x200F }, { 0x202A, 0x202E }, { 0x2060, 0x2063 }, + { 0x206A, 0x206F }, { 0x20D0, 0x20EF }, { 0x302A, 0x302F }, + { 0x3099, 0x309A }, { 0xA806, 0xA806 }, { 0xA80B, 0xA80B }, + { 0xA825, 0xA826 }, { 0xFB1E, 0xFB1E }, { 0xFE00, 0xFE0F }, + { 0xFE20, 0xFE23 }, { 0xFEFF, 0xFEFF }, { 0xFFF9, 0xFFFB }, + { 0x10A01, 0x10A03 }, { 0x10A05, 0x10A06 }, { 0x10A0C, 0x10A0F }, + { 0x10A38, 0x10A3A }, { 0x10A3F, 0x10A3F }, { 0x1D167, 0x1D169 }, + { 0x1D173, 0x1D182 }, { 0x1D185, 0x1D18B }, { 0x1D1AA, 0x1D1AD }, + { 0x1D242, 0x1D244 }, { 0xE0001, 0xE0001 }, { 0xE0020, 0xE007F }, + { 0xE0100, 0xE01EF } + }; + + /* test for 8-bit control characters */ + if (ucs == 0) + return 0; + if (ucs < 32 || (ucs >= 0x7f && ucs < 0xa0)) + return -1; + + /* binary search in table of non-spacing characters */ + if (bisearch(ucs, combining, + sizeof(combining) / sizeof(struct interval) - 1)) + return 0; + + /* if we arrive here, ucs is not a combining or C0/C1 control character */ + + return 1 + + (ucs >= 0x1100 && + (ucs <= 0x115f || /* Hangul Jamo init. consonants */ + ucs == 0x2329 || ucs == 0x232a || + (ucs >= 0x2e80 && ucs <= 0xa4cf && + ucs != 0x303f) || /* CJK ... Yi */ + (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */ + (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Compatibility Ideographs */ + (ucs >= 0xfe10 && ucs <= 0xfe19) || /* Vertical forms */ + (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Compatibility Forms */ + (ucs >= 0xff00 && ucs <= 0xff60) || /* Fullwidth Forms */ + (ucs >= 0xffe0 && ucs <= 0xffe6) || + (ucs >= 0x20000 && ucs <= 0x2fffd) || + (ucs >= 0x30000 && ucs <= 0x3fffd))); +} + + +int mk_wcswidth(const wchar_t *pwcs, size_t n) +{ + int w, width = 0; + + for (;*pwcs && n-- > 0; pwcs++) + if ((w = mk_wcwidth(*pwcs)) < 0) + return -1; + else + width += w; + + return width; +} + + +/* + * The following functions are the same as mk_wcwidth() and + * mk_wcswidth(), except that spacing characters in the East Asian + * Ambiguous (A) category as defined in Unicode Technical Report #11 + * have a column width of 2. This variant might be useful for users of + * CJK legacy encodings who want to migrate to UCS without changing + * the traditional terminal character-width behaviour. It is not + * otherwise recommended for general use. + */ +int mk_wcwidth_cjk(wchar_t ucs) +{ + /* sorted list of non-overlapping intervals of East Asian Ambiguous + * characters, generated by "uniset +WIDTH-A -cat=Me -cat=Mn -cat=Cf c" */ + static const struct interval ambiguous[] = { + { 0x00A1, 0x00A1 }, { 0x00A4, 0x00A4 }, { 0x00A7, 0x00A8 }, + { 0x00AA, 0x00AA }, { 0x00AE, 0x00AE }, { 0x00B0, 0x00B4 }, + { 0x00B6, 0x00BA }, { 0x00BC, 0x00BF }, { 0x00C6, 0x00C6 }, + { 0x00D0, 0x00D0 }, { 0x00D7, 0x00D8 }, { 0x00DE, 0x00E1 }, + { 0x00E6, 0x00E6 }, { 0x00E8, 0x00EA }, { 0x00EC, 0x00ED }, + { 0x00F0, 0x00F0 }, { 0x00F2, 0x00F3 }, { 0x00F7, 0x00FA }, + { 0x00FC, 0x00FC }, { 0x00FE, 0x00FE }, { 0x0101, 0x0101 }, + { 0x0111, 0x0111 }, { 0x0113, 0x0113 }, { 0x011B, 0x011B }, + { 0x0126, 0x0127 }, { 0x012B, 0x012B }, { 0x0131, 0x0133 }, + { 0x0138, 0x0138 }, { 0x013F, 0x0142 }, { 0x0144, 0x0144 }, + { 0x0148, 0x014B }, { 0x014D, 0x014D }, { 0x0152, 0x0153 }, + { 0x0166, 0x0167 }, { 0x016B, 0x016B }, { 0x01CE, 0x01CE }, + { 0x01D0, 0x01D0 }, { 0x01D2, 0x01D2 }, { 0x01D4, 0x01D4 }, + { 0x01D6, 0x01D6 }, { 0x01D8, 0x01D8 }, { 0x01DA, 0x01DA }, + { 0x01DC, 0x01DC }, { 0x0251, 0x0251 }, { 0x0261, 0x0261 }, + { 0x02C4, 0x02C4 }, { 0x02C7, 0x02C7 }, { 0x02C9, 0x02CB }, + { 0x02CD, 0x02CD }, { 0x02D0, 0x02D0 }, { 0x02D8, 0x02DB }, + { 0x02DD, 0x02DD }, { 0x02DF, 0x02DF }, { 0x0391, 0x03A1 }, + { 0x03A3, 0x03A9 }, { 0x03B1, 0x03C1 }, { 0x03C3, 0x03C9 }, + { 0x0401, 0x0401 }, { 0x0410, 0x044F }, { 0x0451, 0x0451 }, + { 0x2010, 0x2010 }, { 0x2013, 0x2016 }, { 0x2018, 0x2019 }, + { 0x201C, 0x201D }, { 0x2020, 0x2022 }, { 0x2024, 0x2027 }, + { 0x2030, 0x2030 }, { 0x2032, 0x2033 }, { 0x2035, 0x2035 }, + { 0x203B, 0x203B }, { 0x203E, 0x203E }, { 0x2074, 0x2074 }, + { 0x207F, 0x207F }, { 0x2081, 0x2084 }, { 0x20AC, 0x20AC }, + { 0x2103, 0x2103 }, { 0x2105, 0x2105 }, { 0x2109, 0x2109 }, + { 0x2113, 0x2113 }, { 0x2116, 0x2116 }, { 0x2121, 0x2122 }, + { 0x2126, 0x2126 }, { 0x212B, 0x212B }, { 0x2153, 0x2154 }, + { 0x215B, 0x215E }, { 0x2160, 0x216B }, { 0x2170, 0x2179 }, + { 0x2190, 0x2199 }, { 0x21B8, 0x21B9 }, { 0x21D2, 0x21D2 }, + { 0x21D4, 0x21D4 }, { 0x21E7, 0x21E7 }, { 0x2200, 0x2200 }, + { 0x2202, 0x2203 }, { 0x2207, 0x2208 }, { 0x220B, 0x220B }, + { 0x220F, 0x220F }, { 0x2211, 0x2211 }, { 0x2215, 0x2215 }, + { 0x221A, 0x221A }, { 0x221D, 0x2220 }, { 0x2223, 0x2223 }, + { 0x2225, 0x2225 }, { 0x2227, 0x222C }, { 0x222E, 0x222E }, + { 0x2234, 0x2237 }, { 0x223C, 0x223D }, { 0x2248, 0x2248 }, + { 0x224C, 0x224C }, { 0x2252, 0x2252 }, { 0x2260, 0x2261 }, + { 0x2264, 0x2267 }, { 0x226A, 0x226B }, { 0x226E, 0x226F }, + { 0x2282, 0x2283 }, { 0x2286, 0x2287 }, { 0x2295, 0x2295 }, + { 0x2299, 0x2299 }, { 0x22A5, 0x22A5 }, { 0x22BF, 0x22BF }, + { 0x2312, 0x2312 }, { 0x2460, 0x24E9 }, { 0x24EB, 0x254B }, + { 0x2550, 0x2573 }, { 0x2580, 0x258F }, { 0x2592, 0x2595 }, + { 0x25A0, 0x25A1 }, { 0x25A3, 0x25A9 }, { 0x25B2, 0x25B3 }, + { 0x25B6, 0x25B7 }, { 0x25BC, 0x25BD }, { 0x25C0, 0x25C1 }, + { 0x25C6, 0x25C8 }, { 0x25CB, 0x25CB }, { 0x25CE, 0x25D1 }, + { 0x25E2, 0x25E5 }, { 0x25EF, 0x25EF }, { 0x2605, 0x2606 }, + { 0x2609, 0x2609 }, { 0x260E, 0x260F }, { 0x2614, 0x2615 }, + { 0x261C, 0x261C }, { 0x261E, 0x261E }, { 0x2640, 0x2640 }, + { 0x2642, 0x2642 }, { 0x2660, 0x2661 }, { 0x2663, 0x2665 }, + { 0x2667, 0x266A }, { 0x266C, 0x266D }, { 0x266F, 0x266F }, + { 0x273D, 0x273D }, { 0x2776, 0x277F }, { 0xE000, 0xF8FF }, + { 0xFFFD, 0xFFFD }, { 0xF0000, 0xFFFFD }, { 0x100000, 0x10FFFD } + }; + + /* binary search in table of non-spacing characters */ + if (bisearch(ucs, ambiguous, + sizeof(ambiguous) / sizeof(struct interval) - 1)) + return 2; + + return mk_wcwidth(ucs); +} + + +int mk_wcswidth_cjk(const wchar_t *pwcs, size_t n) +{ + int w, width = 0; + + for (;*pwcs && n-- > 0; pwcs++) + if ((w = mk_wcwidth_cjk(*pwcs)) < 0) + return -1; + else + width += w; + + return width; +} diff --git a/readline/readline/tcap.h b/readline/readline/tcap.h new file mode 100644 index 0000000000..859e6eed5a --- /dev/null +++ b/readline/readline/tcap.h @@ -0,0 +1,60 @@ +/* tcap.h -- termcap library functions and variables. */ + +/* Copyright (C) 1996-2015 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_RLTCAP_H_) +#define _RLTCAP_H_ + +#if defined (HAVE_CONFIG_H) +# include "config.h" +#endif + +#if defined (HAVE_TERMCAP_H) +# if defined (__linux__) && !defined (SPEED_T_IN_SYS_TYPES) +# include "rltty.h" +# endif +# include +#elif defined (HAVE_NCURSES_TERMCAP_H) +# include +#else + +/* On Solaris2, sys/types.h #includes sys/reg.h, which #defines PC. + Unfortunately, PC is a global variable used by the termcap library. */ +#ifdef PC +# undef PC +#endif + +extern char PC; +extern char *UP, *BC; + +extern short ospeed; + +extern int tgetent (); +extern int tgetflag (); +extern int tgetnum (); +extern char *tgetstr (); + +extern int tputs (); + +extern char *tgoto (); + +#endif /* HAVE_TERMCAP_H */ + +#endif /* !_RLTCAP_H_ */ diff --git a/readline/readline/terminal.c b/readline/readline/terminal.c new file mode 100644 index 0000000000..e557389776 --- /dev/null +++ b/readline/readline/terminal.c @@ -0,0 +1,779 @@ +/* terminal.c -- controlling the terminal with termcap. */ + +/* Copyright (C) 1996-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include "posixstat.h" +#include +#if defined (HAVE_SYS_FILE_H) +# include +#endif /* HAVE_SYS_FILE_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include +#endif + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +#ifdef __MSDOS__ +# include +#endif + +#include "rltty.h" +#if defined (HAVE_SYS_IOCTL_H) +# include /* include for declaration of ioctl */ +#endif +#include "tcap.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +#if defined (__MINGW32__) +# include +# include + +static void _win_get_screensize PARAMS((int *, int *)); +#endif + +#if defined (__EMX__) +static void _emx_get_screensize PARAMS((int *, int *)); +#endif + +/* If the calling application sets this to a non-zero value, readline will + use the $LINES and $COLUMNS environment variables to set its idea of the + window size before interrogating the kernel. */ +int rl_prefer_env_winsize = 0; + +/* If this is non-zero, readline will set LINES and COLUMNS in the + environment when it handles SIGWINCH. */ +int rl_change_environment = 1; + +/* **************************************************************** */ +/* */ +/* Terminal and Termcap */ +/* */ +/* **************************************************************** */ + +#ifndef __MSDOS__ +static char *term_buffer = (char *)NULL; +static char *term_string_buffer = (char *)NULL; +#endif + +static int tcap_initialized; + +#if !defined (__linux__) && !defined (NCURSES_VERSION) +# if defined (__EMX__) || defined (NEED_EXTERN_PC) +extern +# endif /* __EMX__ || NEED_EXTERN_PC */ +char PC, *BC, *UP; +#endif /* !__linux__ && !NCURSES_VERSION */ + +/* Some strings to control terminal actions. These are output by tputs (). */ +char *_rl_term_clreol; +char *_rl_term_clrpag; +char *_rl_term_clrscroll; +char *_rl_term_cr; +char *_rl_term_backspace; +char *_rl_term_goto; +char *_rl_term_pc; + +/* Non-zero if we determine that the terminal can do character insertion. */ +int _rl_terminal_can_insert = 0; + +/* How to insert characters. */ +char *_rl_term_im; +char *_rl_term_ei; +char *_rl_term_ic; +char *_rl_term_ip; +char *_rl_term_IC; + +/* How to delete characters. */ +char *_rl_term_dc; +char *_rl_term_DC; + +/* How to move forward a char, non-destructively */ +char *_rl_term_forward_char; + +/* How to go up a line. */ +char *_rl_term_up; + +/* A visible bell; char if the terminal can be made to flash the screen. */ +static char *_rl_visible_bell; + +/* Non-zero means the terminal can auto-wrap lines. */ +int _rl_term_autowrap = -1; + +/* Non-zero means that this terminal has a meta key. */ +static int term_has_meta; + +/* The sequences to write to turn on and off the meta key, if this + terminal has one. */ +static char *_rl_term_mm; +static char *_rl_term_mo; + +/* The key sequences output by the arrow keys, if this terminal has any. */ +static char *_rl_term_ku; +static char *_rl_term_kd; +static char *_rl_term_kr; +static char *_rl_term_kl; + +/* How to initialize and reset the arrow keys, if this terminal has any. */ +static char *_rl_term_ks; +static char *_rl_term_ke; + +/* The key sequences sent by the Home and End keys, if any. */ +static char *_rl_term_kh; +static char *_rl_term_kH; +static char *_rl_term_at7; /* @7 */ + +/* Delete key */ +static char *_rl_term_kD; + +/* Insert key */ +static char *_rl_term_kI; + +/* Cursor control */ +static char *_rl_term_vs; /* very visible */ +static char *_rl_term_ve; /* normal */ + +static void bind_termcap_arrow_keys PARAMS((Keymap)); + +/* Variables that hold the screen dimensions, used by the display code. */ +int _rl_screenwidth, _rl_screenheight, _rl_screenchars; + +/* Non-zero means the user wants to enable the keypad. */ +int _rl_enable_keypad; + +/* Non-zero means the user wants to enable a meta key. */ +int _rl_enable_meta = 1; + +#if defined (__EMX__) +static void +_emx_get_screensize (int *swp, int *shp) +{ + int sz[2]; + + _scrsize (sz); + + if (swp) + *swp = sz[0]; + if (shp) + *shp = sz[1]; +} +#endif + +#if defined (__MINGW32__) +static void +_win_get_screensize (int *swp, int *shp) +{ + HANDLE hConOut; + CONSOLE_SCREEN_BUFFER_INFO scr; + + hConOut = GetStdHandle (STD_OUTPUT_HANDLE); + if (hConOut != INVALID_HANDLE_VALUE) + { + if (GetConsoleScreenBufferInfo (hConOut, &scr)) + { + *swp = scr.dwSize.X; + *shp = scr.srWindow.Bottom - scr.srWindow.Top + 1; + } + } +} +#endif + +/* Get readline's idea of the screen size. TTY is a file descriptor open + to the terminal. If IGNORE_ENV is true, we do not pay attention to the + values of $LINES and $COLUMNS. The tests for TERM_STRING_BUFFER being + non-null serve to check whether or not we have initialized termcap. */ +void +_rl_get_screen_size (int tty, int ignore_env) +{ + char *ss; +#if defined (TIOCGWINSZ) + struct winsize window_size; +#endif /* TIOCGWINSZ */ + int wr, wc; + + wr = wc = -1; +#if defined (TIOCGWINSZ) + if (ioctl (tty, TIOCGWINSZ, &window_size) == 0) + { + wc = (int) window_size.ws_col; + wr = (int) window_size.ws_row; + } +#endif /* TIOCGWINSZ */ + +#if defined (__EMX__) + _emx_get_screensize (&wc, &wr); +#elif defined (__MINGW32__) + _win_get_screensize (&wc, &wr); +#endif + + if (ignore_env || rl_prefer_env_winsize == 0) + { + _rl_screenwidth = wc; + _rl_screenheight = wr; + } + else + _rl_screenwidth = _rl_screenheight = -1; + + /* Environment variable COLUMNS overrides setting of "co" if IGNORE_ENV + is unset. If we prefer the environment, check it first before + assigning the value returned by the kernel. */ + if (_rl_screenwidth <= 0) + { + if (ignore_env == 0 && (ss = sh_get_env_value ("COLUMNS"))) + _rl_screenwidth = atoi (ss); + + if (_rl_screenwidth <= 0) + _rl_screenwidth = wc; + +#if defined (__DJGPP__) + if (_rl_screenwidth <= 0) + _rl_screenwidth = ScreenCols (); +#else + if (_rl_screenwidth <= 0 && term_string_buffer) + _rl_screenwidth = tgetnum ("co"); +#endif + } + + /* Environment variable LINES overrides setting of "li" if IGNORE_ENV + is unset. */ + if (_rl_screenheight <= 0) + { + if (ignore_env == 0 && (ss = sh_get_env_value ("LINES"))) + _rl_screenheight = atoi (ss); + + if (_rl_screenheight <= 0) + _rl_screenheight = wr; + +#if defined (__DJGPP__) + if (_rl_screenheight <= 0) + _rl_screenheight = ScreenRows (); +#else + if (_rl_screenheight <= 0 && term_string_buffer) + _rl_screenheight = tgetnum ("li"); +#endif + } + + /* If all else fails, default to 80x24 terminal. */ + if (_rl_screenwidth <= 1) + _rl_screenwidth = 80; + + if (_rl_screenheight <= 0) + _rl_screenheight = 24; + + /* If we're being compiled as part of bash, set the environment + variables $LINES and $COLUMNS to new values. Otherwise, just + do a pair of putenv () or setenv () calls. */ + if (rl_change_environment) + sh_set_lines_and_columns (_rl_screenheight, _rl_screenwidth); + + if (_rl_term_autowrap == 0) + _rl_screenwidth--; + + _rl_screenchars = _rl_screenwidth * _rl_screenheight; +} + +void +_rl_set_screen_size (int rows, int cols) +{ + if (_rl_term_autowrap == -1) + _rl_init_terminal_io (rl_terminal_name); + + if (rows > 0) + _rl_screenheight = rows; + if (cols > 0) + { + _rl_screenwidth = cols; + if (_rl_term_autowrap == 0) + _rl_screenwidth--; + } + + if (rows > 0 || cols > 0) + _rl_screenchars = _rl_screenwidth * _rl_screenheight; +} + +void +rl_set_screen_size (int rows, int cols) +{ + _rl_set_screen_size (rows, cols); +} + +void +rl_get_screen_size (int *rows, int *cols) +{ + if (rows) + *rows = _rl_screenheight; + if (cols) + *cols = _rl_screenwidth; +} + +void +rl_reset_screen_size (void) +{ + _rl_get_screen_size (fileno (rl_instream), 0); +} + +void +_rl_sigwinch_resize_terminal (void) +{ + _rl_get_screen_size (fileno (rl_instream), 1); +} + +void +rl_resize_terminal (void) +{ + _rl_get_screen_size (fileno (rl_instream), 1); + if (_rl_echoing_p) + { + if (CUSTOM_REDISPLAY_FUNC ()) + rl_forced_update_display (); + else if (RL_ISSTATE(RL_STATE_REDISPLAYING) == 0) + _rl_redisplay_after_sigwinch (); + } +} + +struct _tc_string { + const char * const tc_var; + char **tc_value; +}; + +/* This should be kept sorted, just in case we decide to change the + search algorithm to something smarter. */ +static const struct _tc_string tc_strings[] = +{ + { "@7", &_rl_term_at7 }, + { "DC", &_rl_term_DC }, + { "E3", &_rl_term_clrscroll }, + { "IC", &_rl_term_IC }, + { "ce", &_rl_term_clreol }, + { "cl", &_rl_term_clrpag }, + { "cr", &_rl_term_cr }, + { "dc", &_rl_term_dc }, + { "ei", &_rl_term_ei }, + { "ic", &_rl_term_ic }, + { "im", &_rl_term_im }, + { "kD", &_rl_term_kD }, /* delete */ + { "kH", &_rl_term_kH }, /* home down ?? */ + { "kI", &_rl_term_kI }, /* insert */ + { "kd", &_rl_term_kd }, + { "ke", &_rl_term_ke }, /* end keypad mode */ + { "kh", &_rl_term_kh }, /* home */ + { "kl", &_rl_term_kl }, + { "kr", &_rl_term_kr }, + { "ks", &_rl_term_ks }, /* start keypad mode */ + { "ku", &_rl_term_ku }, + { "le", &_rl_term_backspace }, + { "mm", &_rl_term_mm }, + { "mo", &_rl_term_mo }, + { "nd", &_rl_term_forward_char }, + { "pc", &_rl_term_pc }, + { "up", &_rl_term_up }, + { "vb", &_rl_visible_bell }, + { "vs", &_rl_term_vs }, + { "ve", &_rl_term_ve }, +}; + +#define NUM_TC_STRINGS (sizeof (tc_strings) / sizeof (struct _tc_string)) + +/* Read the desired terminal capability strings into BP. The capabilities + are described in the TC_STRINGS table. */ +static void +get_term_capabilities (char **bp) +{ +#if !defined (__DJGPP__) /* XXX - doesn't DJGPP have a termcap library? */ + register int i; + + for (i = 0; i < NUM_TC_STRINGS; i++) + *(tc_strings[i].tc_value) = tgetstr ((char *)tc_strings[i].tc_var, bp); +#endif + tcap_initialized = 1; +} + +int +_rl_init_terminal_io (const char *terminal_name) +{ + const char *term; + char *buffer; + int tty, tgetent_ret; + + term = terminal_name ? terminal_name : sh_get_env_value ("TERM"); + _rl_term_clrpag = _rl_term_cr = _rl_term_clreol = _rl_term_clrscroll = (char *)NULL; + tty = rl_instream ? fileno (rl_instream) : 0; + + if (term == 0) + term = "dumb"; + +#ifdef __MSDOS__ + _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL; + _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL; + _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL; + _rl_term_mm = _rl_term_mo = (char *)NULL; + _rl_terminal_can_insert = term_has_meta = _rl_term_autowrap = 0; + _rl_term_cr = "\r"; + _rl_term_backspace = (char *)NULL; + _rl_term_goto = _rl_term_pc = _rl_term_ip = (char *)NULL; + _rl_term_ks = _rl_term_ke =_rl_term_vs = _rl_term_ve = (char *)NULL; + _rl_term_kh = _rl_term_kH = _rl_term_at7 = _rl_term_kI = (char *)NULL; +#if defined(HACK_TERMCAP_MOTION) + _rl_term_forward_char = (char *)NULL; +#endif + + _rl_get_screen_size (tty, 0); +#else /* !__MSDOS__ */ + /* I've separated this out for later work on not calling tgetent at all + if the calling application has supplied a custom redisplay function, + (and possibly if the application has supplied a custom input function). */ + if (CUSTOM_REDISPLAY_FUNC()) + { + tgetent_ret = -1; + } + else + { + if (term_string_buffer == 0) + term_string_buffer = (char *)xmalloc(2032); + + if (term_buffer == 0) + term_buffer = (char *)xmalloc(4080); + + buffer = term_string_buffer; + + tgetent_ret = tgetent (term_buffer, term); + } + + if (tgetent_ret <= 0) + { + FREE (term_string_buffer); + FREE (term_buffer); + buffer = term_buffer = term_string_buffer = (char *)NULL; + + _rl_term_autowrap = 0; /* used by _rl_get_screen_size */ + + /* Allow calling application to set default height and width, using + rl_set_screen_size */ + if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) + { +#if defined (__EMX__) + _emx_get_screensize (&_rl_screenwidth, &_rl_screenheight); + _rl_screenwidth--; +#else /* !__EMX__ */ + _rl_get_screen_size (tty, 0); +#endif /* !__EMX__ */ + } + + /* Defaults. */ + if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) + { + _rl_screenwidth = 79; + _rl_screenheight = 24; + } + + /* Everything below here is used by the redisplay code (tputs). */ + _rl_screenchars = _rl_screenwidth * _rl_screenheight; + _rl_term_cr = "\r"; + _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL; + _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL; + _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL; + _rl_term_kh = _rl_term_kH = _rl_term_kI = _rl_term_kD = (char *)NULL; + _rl_term_ks = _rl_term_ke = _rl_term_at7 = (char *)NULL; + _rl_term_mm = _rl_term_mo = (char *)NULL; + _rl_term_ve = _rl_term_vs = (char *)NULL; + _rl_term_forward_char = (char *)NULL; + _rl_terminal_can_insert = term_has_meta = 0; + + /* Reasonable defaults for tgoto(). Readline currently only uses + tgoto if _rl_term_IC or _rl_term_DC is defined, but just in case we + change that later... */ + PC = '\0'; + BC = _rl_term_backspace = "\b"; + UP = _rl_term_up; + + return 0; + } + + get_term_capabilities (&buffer); + + /* Set up the variables that the termcap library expects the application + to provide. */ + PC = _rl_term_pc ? *_rl_term_pc : 0; + BC = _rl_term_backspace; + UP = _rl_term_up; + + if (!_rl_term_cr) + _rl_term_cr = "\r"; + + _rl_term_autowrap = tgetflag ("am") && tgetflag ("xn"); + + /* Allow calling application to set default height and width, using + rl_set_screen_size */ + if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) + _rl_get_screen_size (tty, 0); + + /* "An application program can assume that the terminal can do + character insertion if *any one of* the capabilities `IC', + `im', `ic' or `ip' is provided." But we can't do anything if + only `ip' is provided, so... */ + _rl_terminal_can_insert = (_rl_term_IC || _rl_term_im || _rl_term_ic); + + /* Check to see if this terminal has a meta key and clear the capability + variables if there is none. */ + term_has_meta = tgetflag ("km") != 0; + if (term_has_meta == 0) + _rl_term_mm = _rl_term_mo = (char *)NULL; +#endif /* !__MSDOS__ */ + + /* Attempt to find and bind the arrow keys. Do not override already + bound keys in an overzealous attempt, however. */ + + bind_termcap_arrow_keys (emacs_standard_keymap); + +#if defined (VI_MODE) + bind_termcap_arrow_keys (vi_movement_keymap); + bind_termcap_arrow_keys (vi_insertion_keymap); +#endif /* VI_MODE */ + + return 0; +} + +/* Bind the arrow key sequences from the termcap description in MAP. */ +static void +bind_termcap_arrow_keys (Keymap map) +{ + Keymap xkeymap; + + xkeymap = _rl_keymap; + _rl_keymap = map; + + rl_bind_keyseq_if_unbound (_rl_term_ku, rl_get_previous_history); + rl_bind_keyseq_if_unbound (_rl_term_kd, rl_get_next_history); + rl_bind_keyseq_if_unbound (_rl_term_kr, rl_forward_char); + rl_bind_keyseq_if_unbound (_rl_term_kl, rl_backward_char); + + rl_bind_keyseq_if_unbound (_rl_term_kh, rl_beg_of_line); /* Home */ + rl_bind_keyseq_if_unbound (_rl_term_at7, rl_end_of_line); /* End */ + + rl_bind_keyseq_if_unbound (_rl_term_kD, rl_delete); + rl_bind_keyseq_if_unbound (_rl_term_kI, rl_overwrite_mode); /* Insert */ + + _rl_keymap = xkeymap; +} + +char * +rl_get_termcap (const char *cap) +{ + register int i; + + if (tcap_initialized == 0) + return ((char *)NULL); + for (i = 0; i < NUM_TC_STRINGS; i++) + { + if (tc_strings[i].tc_var[0] == cap[0] && strcmp (tc_strings[i].tc_var, cap) == 0) + return *(tc_strings[i].tc_value); + } + return ((char *)NULL); +} + +/* Re-initialize the terminal considering that the TERM/TERMCAP variable + has changed. */ +int +rl_reset_terminal (const char *terminal_name) +{ + _rl_screenwidth = _rl_screenheight = 0; + _rl_init_terminal_io (terminal_name); + return 0; +} + +/* A function for the use of tputs () */ +#ifdef _MINIX +void +_rl_output_character_function (int c) +{ + putc (c, _rl_out_stream); +} +#else /* !_MINIX */ +int +_rl_output_character_function (int c) +{ + return putc (c, _rl_out_stream); +} +#endif /* !_MINIX */ + +/* Write COUNT characters from STRING to the output stream. */ +void +_rl_output_some_chars (const char *string, int count) +{ + fwrite (string, 1, count, _rl_out_stream); +} + +/* Move the cursor back. */ +int +_rl_backspace (int count) +{ + register int i; + +#ifndef __MSDOS__ + if (_rl_term_backspace) + for (i = 0; i < count; i++) + tputs (_rl_term_backspace, 1, _rl_output_character_function); + else +#endif + for (i = 0; i < count; i++) + putc ('\b', _rl_out_stream); + return 0; +} + +/* Move to the start of the next line. */ +int +rl_crlf (void) +{ +#if defined (NEW_TTY_DRIVER) || defined (__MINT__) + if (_rl_term_cr) + tputs (_rl_term_cr, 1, _rl_output_character_function); +#endif /* NEW_TTY_DRIVER || __MINT__ */ + putc ('\n', _rl_out_stream); + return 0; +} + +/* Ring the terminal bell. */ +int +rl_ding (void) +{ + if (_rl_echoing_p) + { + switch (_rl_bell_preference) + { + case NO_BELL: + default: + break; + case VISIBLE_BELL: + if (_rl_visible_bell) + { +#ifdef __DJGPP__ + ScreenVisualBell (); +#else + tputs (_rl_visible_bell, 1, _rl_output_character_function); +#endif + break; + } + /* FALLTHROUGH */ + case AUDIBLE_BELL: + fprintf (stderr, "\007"); + fflush (stderr); + break; + } + return (0); + } + return (-1); +} + +/* **************************************************************** */ +/* */ +/* Controlling the Meta Key and Keypad */ +/* */ +/* **************************************************************** */ + +static int enabled_meta = 0; /* flag indicating we enabled meta mode */ + +void +_rl_enable_meta_key (void) +{ +#if !defined (__DJGPP__) + if (term_has_meta && _rl_term_mm) + { + tputs (_rl_term_mm, 1, _rl_output_character_function); + enabled_meta = 1; + } +#endif +} + +void +_rl_disable_meta_key (void) +{ +#if !defined (__DJGPP__) + if (term_has_meta && _rl_term_mo && enabled_meta) + { + tputs (_rl_term_mo, 1, _rl_output_character_function); + enabled_meta = 0; + } +#endif +} + +void +_rl_control_keypad (int on) +{ +#if !defined (__DJGPP__) + if (on && _rl_term_ks) + tputs (_rl_term_ks, 1, _rl_output_character_function); + else if (!on && _rl_term_ke) + tputs (_rl_term_ke, 1, _rl_output_character_function); +#endif +} + +/* **************************************************************** */ +/* */ +/* Controlling the Cursor */ +/* */ +/* **************************************************************** */ + +/* Set the cursor appropriately depending on IM, which is one of the + insert modes (insert or overwrite). Insert mode gets the normal + cursor. Overwrite mode gets a very visible cursor. Only does + anything if we have both capabilities. */ +void +_rl_set_cursor (int im, int force) +{ +#ifndef __MSDOS__ + if (_rl_term_ve && _rl_term_vs) + { + if (force || im != rl_insert_mode) + { + if (im == RL_IM_OVERWRITE) + tputs (_rl_term_vs, 1, _rl_output_character_function); + else + tputs (_rl_term_ve, 1, _rl_output_character_function); + } + } +#endif +} diff --git a/readline/readline/text.c b/readline/readline/text.c new file mode 100644 index 0000000000..cddaeebd2d --- /dev/null +++ b/readline/readline/text.c @@ -0,0 +1,1815 @@ +/* text.c -- text handling commands for readline. */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#if defined (HAVE_UNISTD_H) +# include +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_LOCALE_H) +# include +#endif + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +#if defined (__EMX__) +# define INCL_DOSPROCESS +# include +#endif /* __EMX__ */ + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "rlshell.h" +#include "xmalloc.h" + +/* Forward declarations. */ +static int rl_change_case PARAMS((int, int)); +static int _rl_char_search PARAMS((int, int, int)); + +#if defined (READLINE_CALLBACKS) +static int _rl_insert_next_callback PARAMS((_rl_callback_generic_arg *)); +static int _rl_char_search_callback PARAMS((_rl_callback_generic_arg *)); +#endif + +/* The largest chunk of text that can be inserted in one call to + rl_insert_text. Text blocks larger than this are divided. */ +#define TEXT_COUNT_MAX 1024 + +int _rl_optimize_typeahead = 1; /* rl_insert tries to read typeahead */ + +/* **************************************************************** */ +/* */ +/* Insert and Delete */ +/* */ +/* **************************************************************** */ + +/* Insert a string of text into the line at point. This is the only + way that you should do insertion. _rl_insert_char () calls this + function. Returns the number of characters inserted. */ +int +rl_insert_text (const char *string) +{ + register int i, l; + + l = (string && *string) ? strlen (string) : 0; + if (l == 0) + return 0; + + if (rl_end + l >= rl_line_buffer_len) + rl_extend_line_buffer (rl_end + l); + + for (i = rl_end; i >= rl_point; i--) + rl_line_buffer[i + l] = rl_line_buffer[i]; + strncpy (rl_line_buffer + rl_point, string, l); + + /* Remember how to undo this if we aren't undoing something. */ + if (_rl_doing_an_undo == 0) + { + /* If possible and desirable, concatenate the undos. */ + if ((l == 1) && + rl_undo_list && + (rl_undo_list->what == UNDO_INSERT) && + (rl_undo_list->end == rl_point) && + (rl_undo_list->end - rl_undo_list->start < 20)) + rl_undo_list->end++; + else + rl_add_undo (UNDO_INSERT, rl_point, rl_point + l, (char *)NULL); + } + rl_point += l; + rl_end += l; + rl_line_buffer[rl_end] = '\0'; + return l; +} + +/* Delete the string between FROM and TO. FROM is inclusive, TO is not. + Returns the number of characters deleted. */ +int +rl_delete_text (int from, int to) +{ + register char *text; + register int diff, i; + + /* Fix it if the caller is confused. */ + if (from > to) + SWAP (from, to); + + /* fix boundaries */ + if (to > rl_end) + { + to = rl_end; + if (from > to) + from = to; + } + if (from < 0) + from = 0; + + text = rl_copy_text (from, to); + + /* Some versions of strncpy() can't handle overlapping arguments. */ + diff = to - from; + for (i = from; i < rl_end - diff; i++) + rl_line_buffer[i] = rl_line_buffer[i + diff]; + + /* Remember how to undo this delete. */ + if (_rl_doing_an_undo == 0) + rl_add_undo (UNDO_DELETE, from, to, text); + else + xfree (text); + + rl_end -= diff; + rl_line_buffer[rl_end] = '\0'; + return (diff); +} + +/* Fix up point so that it is within the line boundaries after killing + text. If FIX_MARK_TOO is non-zero, the mark is forced within line + boundaries also. */ + +#define _RL_FIX_POINT(x) \ + do { \ + if (x > rl_end) \ + x = rl_end; \ + else if (x < 0) \ + x = 0; \ + } while (0) + +void +_rl_fix_point (int fix_mark_too) +{ + _RL_FIX_POINT (rl_point); + if (fix_mark_too) + _RL_FIX_POINT (rl_mark); +} +#undef _RL_FIX_POINT + +/* Replace the contents of the line buffer between START and END with + TEXT. The operation is undoable. To replace the entire line in an + undoable mode, use _rl_replace_text(text, 0, rl_end); */ +int +_rl_replace_text (const char *text, int start, int end) +{ + int n; + + n = 0; + rl_begin_undo_group (); + if (start <= end) + rl_delete_text (start, end + 1); + rl_point = start; + if (*text) + n = rl_insert_text (text); + rl_end_undo_group (); + + return n; +} + +/* Replace the current line buffer contents with TEXT. If CLEAR_UNDO is + non-zero, we free the current undo list. */ +void +rl_replace_line (const char *text, int clear_undo) +{ + int len; + + len = strlen (text); + if (len >= rl_line_buffer_len) + rl_extend_line_buffer (len); + strcpy (rl_line_buffer, text); + rl_end = len; + + if (clear_undo) + rl_free_undo_list (); + + _rl_fix_point (1); +} + +/* **************************************************************** */ +/* */ +/* Readline character functions */ +/* */ +/* **************************************************************** */ + +/* This is not a gap editor, just a stupid line input routine. No hair + is involved in writing any of the functions, and none should be. */ + +/* Note that: + + rl_end is the place in the string that we would place '\0'; + i.e., it is always safe to place '\0' there. + + rl_point is the place in the string where the cursor is. Sometimes + this is the same as rl_end. + + Any command that is called interactively receives two arguments. + The first is a count: the numeric arg passed to this command. + The second is the key which invoked this command. +*/ + +/* **************************************************************** */ +/* */ +/* Movement Commands */ +/* */ +/* **************************************************************** */ + +/* Note that if you `optimize' the display for these functions, you cannot + use said functions in other functions which do not do optimizing display. + I.e., you will have to update the data base for rl_redisplay, and you + might as well let rl_redisplay do that job. */ + +/* Move forward COUNT bytes. */ +int +rl_forward_byte (int count, int key) +{ + if (count < 0) + return (rl_backward_byte (-count, key)); + + if (count > 0) + { + int end, lend; + + end = rl_point + count; +#if defined (VI_MODE) + lend = rl_end > 0 ? rl_end - (VI_COMMAND_MODE()) : rl_end; +#else + lend = rl_end; +#endif + + if (end > lend) + { + rl_point = lend; + rl_ding (); + } + else + rl_point = end; + } + + if (rl_end < 0) + rl_end = 0; + + return 0; +} + +int +_rl_forward_char_internal (int count) +{ + int point; + +#if defined (HANDLE_MULTIBYTE) + point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); + +#if defined (VI_MODE) + if (point >= rl_end && VI_COMMAND_MODE()) + point = _rl_find_prev_mbchar (rl_line_buffer, rl_end, MB_FIND_NONZERO); +#endif + + if (rl_end < 0) + rl_end = 0; +#else + point = rl_point + count; +#endif + + if (point > rl_end) + point = rl_end; + return (point); +} + +int +_rl_backward_char_internal (int count) +{ + int point; + + point = rl_point; +#if defined (HANDLE_MULTIBYTE) + if (count > 0) + { + while (count > 0 && point > 0) + { + point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO); + count--; + } + if (count > 0) + return 0; /* XXX - rl_ding() here? */ + } +#else + if (count > 0) + point -= count; +#endif + + if (point < 0) + point = 0; + return (point); +} + +#if defined (HANDLE_MULTIBYTE) +/* Move forward COUNT characters. */ +int +rl_forward_char (int count, int key) +{ + int point; + + if (MB_CUR_MAX == 1 || rl_byte_oriented) + return (rl_forward_byte (count, key)); + + if (count < 0) + return (rl_backward_char (-count, key)); + + if (count > 0) + { + if (rl_point == rl_end && EMACS_MODE()) + { + rl_ding (); + return 0; + } + + point = _rl_forward_char_internal (count); + + if (rl_point == point) + rl_ding (); + + rl_point = point; + } + + return 0; +} +#else /* !HANDLE_MULTIBYTE */ +int +rl_forward_char (int count, int key) +{ + return (rl_forward_byte (count, key)); +} +#endif /* !HANDLE_MULTIBYTE */ + +/* Backwards compatibility. */ +int +rl_forward (int count, int key) +{ + return (rl_forward_char (count, key)); +} + +/* Move backward COUNT bytes. */ +int +rl_backward_byte (int count, int key) +{ + if (count < 0) + return (rl_forward_byte (-count, key)); + + if (count > 0) + { + if (rl_point < count) + { + rl_point = 0; + rl_ding (); + } + else + rl_point -= count; + } + + if (rl_point < 0) + rl_point = 0; + + return 0; +} + +#if defined (HANDLE_MULTIBYTE) +/* Move backward COUNT characters. */ +int +rl_backward_char (int count, int key) +{ + int point; + + if (MB_CUR_MAX == 1 || rl_byte_oriented) + return (rl_backward_byte (count, key)); + + if (count < 0) + return (rl_forward_char (-count, key)); + + if (count > 0) + { + point = rl_point; + + while (count > 0 && point > 0) + { + point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO); + count--; + } + if (count > 0) + { + rl_point = 0; + rl_ding (); + } + else + rl_point = point; + } + + return 0; +} +#else +int +rl_backward_char (int count, int key) +{ + return (rl_backward_byte (count, key)); +} +#endif + +/* Backwards compatibility. */ +int +rl_backward (int count, int key) +{ + return (rl_backward_char (count, key)); +} + +/* Move to the beginning of the line. */ +int +rl_beg_of_line (int count, int key) +{ + rl_point = 0; + return 0; +} + +/* Move to the end of the line. */ +int +rl_end_of_line (int count, int key) +{ + rl_point = rl_end; + return 0; +} + +/* Move forward a word. We do what Emacs does. Handles multibyte chars. */ +int +rl_forward_word (int count, int key) +{ + int c; + + if (count < 0) + return (rl_backward_word (-count, key)); + + while (count) + { + if (rl_point == rl_end) + return 0; + + /* If we are not in a word, move forward until we are in one. + Then, move forward until we hit a non-alphabetic character. */ + c = _rl_char_value (rl_line_buffer, rl_point); + + if (_rl_walphabetic (c) == 0) + { + rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + while (rl_point < rl_end) + { + c = _rl_char_value (rl_line_buffer, rl_point); + if (_rl_walphabetic (c)) + break; + rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + } + } + + if (rl_point == rl_end) + return 0; + + rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + while (rl_point < rl_end) + { + c = _rl_char_value (rl_line_buffer, rl_point); + if (_rl_walphabetic (c) == 0) + break; + rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + } + + --count; + } + + return 0; +} + +/* Move backward a word. We do what Emacs does. Handles multibyte chars. */ +int +rl_backward_word (int count, int key) +{ + int c, p; + + if (count < 0) + return (rl_forward_word (-count, key)); + + while (count) + { + if (rl_point == 0) + return 0; + + /* Like rl_forward_word (), except that we look at the characters + just before point. */ + + p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); + c = _rl_char_value (rl_line_buffer, p); + + if (_rl_walphabetic (c) == 0) + { + rl_point = p; + while (rl_point > 0) + { + p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); + c = _rl_char_value (rl_line_buffer, p); + if (_rl_walphabetic (c)) + break; + rl_point = p; + } + } + + while (rl_point) + { + p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); + c = _rl_char_value (rl_line_buffer, p); + if (_rl_walphabetic (c) == 0) + break; + else + rl_point = p; + } + + --count; + } + + return 0; +} + +/* Clear the current line. Numeric argument to C-l does this. */ +int +rl_refresh_line (int ignore1, int ignore2) +{ + int curr_line; + + curr_line = _rl_current_display_line (); + + _rl_move_vert (curr_line); + _rl_move_cursor_relative (0, rl_line_buffer); /* XXX is this right */ + + _rl_clear_to_eol (0); /* arg of 0 means to not use spaces */ + + rl_redraw_prompt_last_line (); + rl_display_fixed = 1; + + return 0; +} + +/* C-l typed to a line without quoting clears the screen, and then reprints + the prompt and the current input line. Given a numeric arg, redraw only + the current line. */ +int +rl_clear_screen (int count, int key) +{ + if (rl_explicit_arg) + { + rl_refresh_line (count, key); + return 0; + } + + _rl_clear_screen (); /* calls termcap function to clear screen */ + rl_forced_update_display (); + rl_display_fixed = 1; + + return 0; +} + +int +rl_previous_screen_line (int count, int key) +{ + int c; + + c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1); + return (rl_backward_char (c, key)); +} + +int +rl_next_screen_line (int count, int key) +{ + int c; + + c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1); + return (rl_forward_char (c, key)); +} + +int +rl_skip_csi_sequence (int count, int key) +{ + int ch; + + RL_SETSTATE (RL_STATE_MOREINPUT); + do + ch = rl_read_key (); + while (ch >= 0x20 && ch < 0x40); + RL_UNSETSTATE (RL_STATE_MOREINPUT); + + return (ch < 0); +} + +int +rl_arrow_keys (int count, int key) +{ + int ch; + + RL_SETSTATE(RL_STATE_MOREINPUT); + ch = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + if (ch < 0) + return (1); + + switch (_rl_to_upper (ch)) + { + case 'A': + rl_get_previous_history (count, ch); + break; + + case 'B': + rl_get_next_history (count, ch); + break; + + case 'C': + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_forward_char (count, ch); + else + rl_forward_byte (count, ch); + break; + + case 'D': + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_backward_char (count, ch); + else + rl_backward_byte (count, ch); + break; + + default: + rl_ding (); + } + + return 0; +} + +/* **************************************************************** */ +/* */ +/* Text commands */ +/* */ +/* **************************************************************** */ + +#ifdef HANDLE_MULTIBYTE +static char pending_bytes[MB_LEN_MAX]; +static int pending_bytes_length = 0; +static mbstate_t ps = {0}; +#endif + +/* Insert the character C at the current location, moving point forward. + If C introduces a multibyte sequence, we read the whole sequence and + then insert the multibyte char into the line buffer. */ +int +_rl_insert_char (int count, int c) +{ + register int i; + char *string; +#ifdef HANDLE_MULTIBYTE + int string_size; + char incoming[MB_LEN_MAX + 1]; + int incoming_length = 0; + mbstate_t ps_back; + static int stored_count = 0; +#endif + + if (count <= 0) + return 0; + +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX == 1 || rl_byte_oriented) + { + incoming[0] = c; + incoming[1] = '\0'; + incoming_length = 1; + } + else if (_rl_utf8locale && (c & 0x80) == 0) + { + incoming[0] = c; + incoming[1] = '\0'; + incoming_length = 1; + } + else + { + wchar_t wc; + size_t ret; + + if (stored_count <= 0) + stored_count = count; + else + count = stored_count; + + ps_back = ps; + pending_bytes[pending_bytes_length++] = c; + ret = mbrtowc (&wc, pending_bytes, pending_bytes_length, &ps); + + if (ret == (size_t)-2) + { + /* Bytes too short to compose character, try to wait for next byte. + Restore the state of the byte sequence, because in this case the + effect of mbstate is undefined. */ + ps = ps_back; + return 1; + } + else if (ret == (size_t)-1) + { + /* Invalid byte sequence for the current locale. Treat first byte + as a single character. */ + incoming[0] = pending_bytes[0]; + incoming[1] = '\0'; + incoming_length = 1; + pending_bytes_length--; + memmove (pending_bytes, pending_bytes + 1, pending_bytes_length); + /* Clear the state of the byte sequence, because in this case the + effect of mbstate is undefined. */ + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (ret == (size_t)0) + { + incoming[0] = '\0'; + incoming_length = 0; + pending_bytes_length--; + /* Clear the state of the byte sequence, because in this case the + effect of mbstate is undefined. */ + memset (&ps, 0, sizeof (mbstate_t)); + } + else if (ret == 1) + { + incoming[0] = pending_bytes[0]; + incoming[incoming_length = 1] = '\0'; + pending_bytes_length = 0; + } + else + { + /* We successfully read a single multibyte character. */ + memcpy (incoming, pending_bytes, pending_bytes_length); + incoming[pending_bytes_length] = '\0'; + incoming_length = pending_bytes_length; + pending_bytes_length = 0; + } + } +#endif /* HANDLE_MULTIBYTE */ + + /* If we can optimize, then do it. But don't let people crash + readline because of extra large arguments. */ + if (count > 1 && count <= TEXT_COUNT_MAX) + { +#if defined (HANDLE_MULTIBYTE) + string_size = count * incoming_length; + string = (char *)xmalloc (1 + string_size); + + i = 0; + while (i < string_size) + { + if (incoming_length == 1) + string[i++] = *incoming; + else + { + strncpy (string + i, incoming, incoming_length); + i += incoming_length; + } + } + incoming_length = 0; + stored_count = 0; +#else /* !HANDLE_MULTIBYTE */ + string = (char *)xmalloc (1 + count); + + for (i = 0; i < count; i++) + string[i] = c; +#endif /* !HANDLE_MULTIBYTE */ + + string[i] = '\0'; + rl_insert_text (string); + xfree (string); + + return 0; + } + + if (count > TEXT_COUNT_MAX) + { + int decreaser; +#if defined (HANDLE_MULTIBYTE) + string_size = incoming_length * TEXT_COUNT_MAX; + string = (char *)xmalloc (1 + string_size); + + i = 0; + while (i < string_size) + { + if (incoming_length == 1) + string[i++] = *incoming; + else + { + strncpy (string + i, incoming, incoming_length); + i += incoming_length; + } + } + + while (count) + { + decreaser = (count > TEXT_COUNT_MAX) ? TEXT_COUNT_MAX : count; + string[decreaser*incoming_length] = '\0'; + rl_insert_text (string); + count -= decreaser; + } + + xfree (string); + incoming_length = 0; + stored_count = 0; +#else /* !HANDLE_MULTIBYTE */ + char str[TEXT_COUNT_MAX+1]; + + for (i = 0; i < TEXT_COUNT_MAX; i++) + str[i] = c; + + while (count) + { + decreaser = (count > TEXT_COUNT_MAX ? TEXT_COUNT_MAX : count); + str[decreaser] = '\0'; + rl_insert_text (str); + count -= decreaser; + } +#endif /* !HANDLE_MULTIBYTE */ + + return 0; + } + + if (MB_CUR_MAX == 1 || rl_byte_oriented) + { + /* We are inserting a single character. + If there is pending input, then make a string of all of the + pending characters that are bound to rl_insert, and insert + them all. Don't do this if we're current reading input from + a macro. */ + if ((RL_ISSTATE (RL_STATE_MACROINPUT) == 0) && _rl_pushed_input_available ()) + _rl_insert_typein (c); + else + { + /* Inserting a single character. */ + char str[2]; + + str[1] = '\0'; + str[0] = c; + rl_insert_text (str); + } + } +#if defined (HANDLE_MULTIBYTE) + else + { + rl_insert_text (incoming); + stored_count = 0; + } +#endif + + return 0; +} + +/* Overwrite the character at point (or next COUNT characters) with C. + If C introduces a multibyte character sequence, read the entire sequence + before starting the overwrite loop. */ +int +_rl_overwrite_char (int count, int c) +{ + int i; +#if defined (HANDLE_MULTIBYTE) + char mbkey[MB_LEN_MAX]; + int k; + + /* Read an entire multibyte character sequence to insert COUNT times. */ + if (count > 0 && MB_CUR_MAX > 1 && rl_byte_oriented == 0) + k = _rl_read_mbstring (c, mbkey, MB_LEN_MAX); +#endif + + rl_begin_undo_group (); + + for (i = 0; i < count; i++) + { +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_insert_text (mbkey); + else +#endif + _rl_insert_char (1, c); + + if (rl_point < rl_end) + rl_delete (1, c); + } + + rl_end_undo_group (); + + return 0; +} + +int +rl_insert (int count, int c) +{ + int r, n, x; + + r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (count, c) : _rl_overwrite_char (count, c); + + /* XXX -- attempt to batch-insert pending input that maps to self-insert */ + x = 0; + n = (unsigned short)-2; + while (_rl_optimize_typeahead && + rl_num_chars_to_read == 0 && + (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && + _rl_pushed_input_available () == 0 && + _rl_input_queued (0) && + (n = rl_read_key ()) > 0 && + _rl_keymap[(unsigned char)n].type == ISFUNC && + _rl_keymap[(unsigned char)n].function == rl_insert) + { + r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (1, n) : _rl_overwrite_char (1, n); + /* _rl_insert_char keeps its own set of pending characters to compose a + complete multibyte character, and only returns 1 if it sees a character + that's part of a multibyte character but too short to complete one. We + can try to read another character in the hopes that we will get the + next one or just punt. Right now we try to read another character. + We don't want to call rl_insert_next if _rl_insert_char has already + stored the character in the pending_bytes array because that will + result in doubled input. */ + n = (unsigned short)-2; + x++; /* count of bytes of typeahead read, currently unused */ + if (r == 1) /* read partial multibyte character */ + continue; + if (rl_done || r != 0) + break; + } + + if (n != (unsigned short)-2) /* -2 = sentinel value for having inserted N */ + { + /* setting rl_pending_input inhibits setting rl_last_func so we do it + ourselves here */ + rl_last_func = rl_insert; + _rl_reset_argument (); + rl_executing_keyseq[rl_key_sequence_length = 0] = '\0'; + r = rl_execute_next (n); + } + + return r; +} + +/* Insert the next typed character verbatim. */ +static int +_rl_insert_next (int count) +{ + int c; + + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (c < 0) + return 1; + + if (RL_ISSTATE (RL_STATE_MACRODEF)) + _rl_add_macro_char (c); + +#if defined (HANDLE_SIGNALS) + if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) + _rl_restore_tty_signals (); +#endif + + return (_rl_insert_char (count, c)); +} + +#if defined (READLINE_CALLBACKS) +static int +_rl_insert_next_callback (_rl_callback_generic_arg *data) +{ + int count, r; + + count = data->count; + r = 0; + + if (count < 0) + { + data->count++; + r = _rl_insert_next (1); + _rl_want_redisplay = 1; + /* If we should keep going, leave the callback function installed */ + if (data->count < 0 && r == 0) + return r; + count = 0; /* data->count == 0 || r != 0; force break below */ + } + + /* Deregister function, let rl_callback_read_char deallocate data */ + _rl_callback_func = 0; + _rl_want_redisplay = 1; + + if (count == 0) + return r; + + return _rl_insert_next (count); +} +#endif + +int +rl_quoted_insert (int count, int key) +{ + /* Let's see...should the callback interface futz with signal handling? */ +#if defined (HANDLE_SIGNALS) + if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) + _rl_disable_tty_signals (); +#endif + +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = _rl_callback_data_alloc (count); + _rl_callback_func = _rl_insert_next_callback; + return (0); + } +#endif + + /* A negative count means to quote the next -COUNT characters. */ + if (count < 0) + { + int r; + + do + r = _rl_insert_next (1); + while (r == 0 && ++count < 0); + return r; + } + + return _rl_insert_next (count); +} + +/* Insert a tab character. */ +int +rl_tab_insert (int count, int key) +{ + return (_rl_insert_char (count, '\t')); +} + +/* What to do when a NEWLINE is pressed. We accept the whole line. + KEY is the key that invoked this command. I guess it could have + meaning in the future. */ +int +rl_newline (int count, int key) +{ + rl_done = 1; + + if (_rl_history_preserve_point) + _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; + + RL_SETSTATE(RL_STATE_DONE); + +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + { + _rl_vi_done_inserting (); + if (_rl_vi_textmod_command (_rl_vi_last_command) == 0) /* XXX */ + _rl_vi_reset_last (); + } +#endif /* VI_MODE */ + + /* If we've been asked to erase empty lines, suppress the final update, + since _rl_update_final calls rl_crlf(). */ + if (rl_erase_empty_line && rl_point == 0 && rl_end == 0) + return 0; + + if (_rl_echoing_p) + _rl_update_final (); + return 0; +} + +/* What to do for some uppercase characters, like meta characters, + and some characters appearing in emacs_ctlx_keymap. This function + is just a stub, you bind keys to it and the code in _rl_dispatch () + is special cased. */ +int +rl_do_lowercase_version (int ignore1, int ignore2) +{ + return 0; +} + +/* This is different from what vi does, so the code's not shared. Emacs + rubout in overwrite mode has one oddity: it replaces a control + character that's displayed as two characters (^X) with two spaces. */ +int +_rl_overwrite_rubout (int count, int key) +{ + int opoint; + int i, l; + + if (rl_point == 0) + { + rl_ding (); + return 1; + } + + opoint = rl_point; + + /* L == number of spaces to insert */ + for (i = l = 0; i < count; i++) + { + rl_backward_char (1, key); + l += rl_character_len (rl_line_buffer[rl_point], rl_point); /* not exactly right */ + } + + rl_begin_undo_group (); + + if (count > 1 || rl_explicit_arg) + rl_kill_text (opoint, rl_point); + else + rl_delete_text (opoint, rl_point); + + /* Emacs puts point at the beginning of the sequence of spaces. */ + if (rl_point < rl_end) + { + opoint = rl_point; + _rl_insert_char (l, ' '); + rl_point = opoint; + } + + rl_end_undo_group (); + + return 0; +} + +/* Rubout the character behind point. */ +int +rl_rubout (int count, int key) +{ + if (count < 0) + return (rl_delete (-count, key)); + + if (!rl_point) + { + rl_ding (); + return 1; + } + + if (rl_insert_mode == RL_IM_OVERWRITE) + return (_rl_overwrite_rubout (count, key)); + + return (_rl_rubout_char (count, key)); +} + +int +_rl_rubout_char (int count, int key) +{ + int orig_point; + unsigned char c; + + /* Duplicated code because this is called from other parts of the library. */ + if (count < 0) + return (rl_delete (-count, key)); + + if (rl_point == 0) + { + rl_ding (); + return 1; + } + + orig_point = rl_point; + if (count > 1 || rl_explicit_arg) + { + rl_backward_char (count, key); + rl_kill_text (orig_point, rl_point); + } + else if (MB_CUR_MAX == 1 || rl_byte_oriented) + { + c = rl_line_buffer[--rl_point]; + rl_delete_text (rl_point, orig_point); + /* The erase-at-end-of-line hack is of questionable merit now. */ + if (rl_point == rl_end && ISPRINT ((unsigned char)c) && _rl_last_c_pos) + { + int l; + l = rl_character_len (c, rl_point); + _rl_erase_at_end_of_line (l); + } + } + else + { + rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); + rl_delete_text (rl_point, orig_point); + } + + return 0; +} + +/* Delete the character under the cursor. Given a numeric argument, + kill that many characters instead. */ +int +rl_delete (int count, int key) +{ + int xpoint; + + if (count < 0) + return (_rl_rubout_char (-count, key)); + + if (rl_point == rl_end) + { + rl_ding (); + return 1; + } + + if (count > 1 || rl_explicit_arg) + { + xpoint = rl_point; + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_forward_char (count, key); + else + rl_forward_byte (count, key); + + rl_kill_text (xpoint, rl_point); + rl_point = xpoint; + } + else + { + xpoint = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + rl_delete_text (rl_point, xpoint); + } + return 0; +} + +/* Delete the character under the cursor, unless the insertion + point is at the end of the line, in which case the character + behind the cursor is deleted. COUNT is obeyed and may be used + to delete forward or backward that many characters. */ +int +rl_rubout_or_delete (int count, int key) +{ + if (rl_end != 0 && rl_point == rl_end) + return (_rl_rubout_char (count, key)); + else + return (rl_delete (count, key)); +} + +/* Delete all spaces and tabs around point. */ +int +rl_delete_horizontal_space (int count, int ignore) +{ + int start; + + while (rl_point && whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + start = rl_point; + + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + rl_point++; + + if (start != rl_point) + { + rl_delete_text (start, rl_point); + rl_point = start; + } + + if (rl_point < 0) + rl_point = 0; + + return 0; +} + +/* Like the tcsh editing function delete-char-or-list. The eof character + is caught before this is invoked, so this really does the same thing as + delete-char-or-list-or-eof, as long as it's bound to the eof character. */ +int +rl_delete_or_show_completions (int count, int key) +{ + if (rl_end != 0 && rl_point == rl_end) + return (rl_possible_completions (count, key)); + else + return (rl_delete (count, key)); +} + +#ifndef RL_COMMENT_BEGIN_DEFAULT +#define RL_COMMENT_BEGIN_DEFAULT "#" +#endif + +/* Turn the current line into a comment in shell history. + A K*rn shell style function. */ +int +rl_insert_comment (int count, int key) +{ + char *rl_comment_text; + int rl_comment_len; + + rl_beg_of_line (1, key); + rl_comment_text = _rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT; + + if (rl_explicit_arg == 0) + rl_insert_text (rl_comment_text); + else + { + rl_comment_len = strlen (rl_comment_text); + if (STREQN (rl_comment_text, rl_line_buffer, rl_comment_len)) + rl_delete_text (rl_point, rl_point + rl_comment_len); + else + rl_insert_text (rl_comment_text); + } + + (*rl_redisplay_function) (); + rl_newline (1, '\n'); + + return (0); +} + +/* **************************************************************** */ +/* */ +/* Changing Case */ +/* */ +/* **************************************************************** */ + +/* The three kinds of things that we know how to do. */ +#define UpCase 1 +#define DownCase 2 +#define CapCase 3 + +/* Uppercase the word at point. */ +int +rl_upcase_word (int count, int key) +{ + return (rl_change_case (count, UpCase)); +} + +/* Lowercase the word at point. */ +int +rl_downcase_word (int count, int key) +{ + return (rl_change_case (count, DownCase)); +} + +/* Upcase the first letter, downcase the rest. */ +int +rl_capitalize_word (int count, int key) +{ + return (rl_change_case (count, CapCase)); +} + +/* The meaty function. + Change the case of COUNT words, performing OP on them. + OP is one of UpCase, DownCase, or CapCase. + If a negative argument is given, leave point where it started, + otherwise, leave it where it moves to. */ +static int +rl_change_case (int count, int op) +{ + int start, next, end; + int inword, nc, nop; + wchar_t c; +#if defined (HANDLE_MULTIBYTE) + wchar_t wc, nwc; + char mb[MB_LEN_MAX+1]; + int mlen; + size_t m; + mbstate_t mps; +#endif + + start = rl_point; + rl_forward_word (count, 0); + end = rl_point; + + if (op != UpCase && op != DownCase && op != CapCase) + { + rl_ding (); + return 1; + } + + if (count < 0) + SWAP (start, end); + +#if defined (HANDLE_MULTIBYTE) + memset (&mps, 0, sizeof (mbstate_t)); +#endif + + /* We are going to modify some text, so let's prepare to undo it. */ + rl_modifying (start, end); + + inword = 0; + while (start < end) + { + c = _rl_char_value (rl_line_buffer, start); + /* This assumes that the upper and lower case versions are the same width. */ + next = MB_NEXTCHAR (rl_line_buffer, start, 1, MB_FIND_NONZERO); + + if (_rl_walphabetic (c) == 0) + { + inword = 0; + start = next; + continue; + } + + if (op == CapCase) + { + nop = inword ? DownCase : UpCase; + inword = 1; + } + else + nop = op; + /* Can't check isascii here; some languages (e.g, Turkish) have + multibyte upper and lower case equivalents of single-byte ascii + characters */ + if (MB_CUR_MAX == 1 || rl_byte_oriented) + { + nc = (nop == UpCase) ? _rl_to_upper (c) : _rl_to_lower (c); + rl_line_buffer[start] = nc; + } +#if defined (HANDLE_MULTIBYTE) + else + { + m = mbrtowc (&wc, rl_line_buffer + start, end - start, &mps); + if (MB_INVALIDCH (m)) + wc = (wchar_t)rl_line_buffer[start]; + else if (MB_NULLWCH (m)) + wc = L'\0'; + nwc = (nop == UpCase) ? _rl_to_wupper (wc) : _rl_to_wlower (wc); + if (nwc != wc) /* just skip unchanged characters */ + { + char *s, *e; + mlen = wcrtomb (mb, nwc, &mps); + if (mlen > 0) + mb[mlen] = '\0'; + /* what to do if m != mlen? adjust below */ + /* m == length of old char, mlen == length of new char */ + s = rl_line_buffer + start; + e = rl_line_buffer + rl_end; + if (m == mlen) + memcpy (s, mb, mlen); + else if (m > mlen) + { + memcpy (s, mb, mlen); + memmove (s + mlen, s + m, (e - s) - m); + next -= m - mlen; /* next char changes */ + end -= m - mlen; /* end of word changes */ + rl_end -= m - mlen; /* end of line changes */ + rl_line_buffer[rl_end] = 0; + } + else if (m < mlen) + { + rl_extend_line_buffer (mlen - m + 1); + memmove (s + mlen, s + m, (e - s) - m); + memcpy (s, mb, mlen); + next += mlen - m; /* next char changes */ + end += mlen - m; /* end of word changes */ + rl_end += mlen - m; /* end of line changes */ + rl_line_buffer[rl_end] = 0; + } + } + } +#endif + + start = next; + } + + rl_point = end; + return 0; +} + +/* **************************************************************** */ +/* */ +/* Transposition */ +/* */ +/* **************************************************************** */ + +/* Transpose the words at point. If point is at the end of the line, + transpose the two words before point. */ +int +rl_transpose_words (int count, int key) +{ + char *word1, *word2; + int w1_beg, w1_end, w2_beg, w2_end; + int orig_point = rl_point; + + if (!count) + return 0; + + /* Find the two words. */ + rl_forward_word (count, key); + w2_end = rl_point; + rl_backward_word (1, key); + w2_beg = rl_point; + rl_backward_word (count, key); + w1_beg = rl_point; + rl_forward_word (1, key); + w1_end = rl_point; + + /* Do some check to make sure that there really are two words. */ + if ((w1_beg == w2_beg) || (w2_beg < w1_end)) + { + rl_ding (); + rl_point = orig_point; + return 1; + } + + /* Get the text of the words. */ + word1 = rl_copy_text (w1_beg, w1_end); + word2 = rl_copy_text (w2_beg, w2_end); + + /* We are about to do many insertions and deletions. Remember them + as one operation. */ + rl_begin_undo_group (); + + /* Do the stuff at word2 first, so that we don't have to worry + about word1 moving. */ + rl_point = w2_beg; + rl_delete_text (w2_beg, w2_end); + rl_insert_text (word1); + + rl_point = w1_beg; + rl_delete_text (w1_beg, w1_end); + rl_insert_text (word2); + + /* This is exactly correct since the text before this point has not + changed in length. */ + rl_point = w2_end; + + /* I think that does it. */ + rl_end_undo_group (); + xfree (word1); + xfree (word2); + + return 0; +} + +/* Transpose the characters at point. If point is at the end of the line, + then transpose the characters before point. */ +int +rl_transpose_chars (int count, int key) +{ +#if defined (HANDLE_MULTIBYTE) + char *dummy; + int i; +#else + char dummy[2]; +#endif + int char_length, prev_point; + + if (count == 0) + return 0; + + if (!rl_point || rl_end < 2) + { + rl_ding (); + return 1; + } + + rl_begin_undo_group (); + + if (rl_point == rl_end) + { + rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); + count = 1; + } + + prev_point = rl_point; + rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); + +#if defined (HANDLE_MULTIBYTE) + char_length = prev_point - rl_point; + dummy = (char *)xmalloc (char_length + 1); + for (i = 0; i < char_length; i++) + dummy[i] = rl_line_buffer[rl_point + i]; + dummy[i] = '\0'; +#else + dummy[0] = rl_line_buffer[rl_point]; + dummy[char_length = 1] = '\0'; +#endif + + rl_delete_text (rl_point, rl_point + char_length); + + rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); + + _rl_fix_point (0); + rl_insert_text (dummy); + rl_end_undo_group (); + +#if defined (HANDLE_MULTIBYTE) + xfree (dummy); +#endif + + return 0; +} + +/* **************************************************************** */ +/* */ +/* Character Searching */ +/* */ +/* **************************************************************** */ + +int +#if defined (HANDLE_MULTIBYTE) +_rl_char_search_internal (int count, int dir, char *smbchar, int len) +#else +_rl_char_search_internal (int count, int dir, int schar) +#endif +{ + int pos, inc; +#if defined (HANDLE_MULTIBYTE) + int prepos; +#endif + + if (dir == 0) + return 1; + + pos = rl_point; + inc = (dir < 0) ? -1 : 1; + while (count) + { + if ((dir < 0 && pos <= 0) || (dir > 0 && pos >= rl_end)) + { + rl_ding (); + return 1; + } + +#if defined (HANDLE_MULTIBYTE) + pos = (inc > 0) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY) + : _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY); +#else + pos += inc; +#endif + do + { +#if defined (HANDLE_MULTIBYTE) + if (_rl_is_mbchar_matched (rl_line_buffer, pos, rl_end, smbchar, len)) +#else + if (rl_line_buffer[pos] == schar) +#endif + { + count--; + if (dir < 0) + rl_point = (dir == BTO) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY) + : pos; + else + rl_point = (dir == FTO) ? _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY) + : pos; + break; + } +#if defined (HANDLE_MULTIBYTE) + prepos = pos; +#endif + } +#if defined (HANDLE_MULTIBYTE) + while ((dir < 0) ? (pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY)) != prepos + : (pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY)) != prepos); +#else + while ((dir < 0) ? pos-- : ++pos < rl_end); +#endif + } + return (0); +} + +/* Search COUNT times for a character read from the current input stream. + FDIR is the direction to search if COUNT is non-negative; otherwise + the search goes in BDIR. So much is dependent on HANDLE_MULTIBYTE + that there are two separate versions of this function. */ +#if defined (HANDLE_MULTIBYTE) +static int +_rl_char_search (int count, int fdir, int bdir) +{ + char mbchar[MB_LEN_MAX]; + int mb_len; + + mb_len = _rl_read_mbchar (mbchar, MB_LEN_MAX); + + if (mb_len <= 0) + return 1; + + if (count < 0) + return (_rl_char_search_internal (-count, bdir, mbchar, mb_len)); + else + return (_rl_char_search_internal (count, fdir, mbchar, mb_len)); +} +#else /* !HANDLE_MULTIBYTE */ +static int +_rl_char_search (int count, int fdir, int bdir) +{ + int c; + + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (c < 0) + return 1; + + if (count < 0) + return (_rl_char_search_internal (-count, bdir, c)); + else + return (_rl_char_search_internal (count, fdir, c)); +} +#endif /* !HANDLE_MULTIBYTE */ + +#if defined (READLINE_CALLBACKS) +static int +_rl_char_search_callback (data) + _rl_callback_generic_arg *data; +{ + _rl_callback_func = 0; + _rl_want_redisplay = 1; + + return (_rl_char_search (data->count, data->i1, data->i2)); +} +#endif + +int +rl_char_search (int count, int key) +{ +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = _rl_callback_data_alloc (count); + _rl_callback_data->i1 = FFIND; + _rl_callback_data->i2 = BFIND; + _rl_callback_func = _rl_char_search_callback; + return (0); + } +#endif + + return (_rl_char_search (count, FFIND, BFIND)); +} + +int +rl_backward_char_search (int count, int key) +{ +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = _rl_callback_data_alloc (count); + _rl_callback_data->i1 = BFIND; + _rl_callback_data->i2 = FFIND; + _rl_callback_func = _rl_char_search_callback; + return (0); + } +#endif + + return (_rl_char_search (count, BFIND, FFIND)); +} + +/* **************************************************************** */ +/* */ +/* The Mark and the Region. */ +/* */ +/* **************************************************************** */ + +/* Set the mark at POSITION. */ +int +_rl_set_mark_at_pos (int position) +{ + if (position < 0 || position > rl_end) + return 1; + + rl_mark = position; + return 0; +} + +/* A bindable command to set the mark. */ +int +rl_set_mark (int count, int key) +{ + return (_rl_set_mark_at_pos (rl_explicit_arg ? count : rl_point)); +} + +/* Exchange the position of mark and point. */ +int +rl_exchange_point_and_mark (int count, int key) +{ + if (rl_mark > rl_end) + rl_mark = -1; + + if (rl_mark < 0) + { + rl_ding (); + rl_mark = 0; /* like _RL_FIX_POINT */ + return 1; + } + else + SWAP (rl_point, rl_mark); + + return 0; +} diff --git a/readline/readline/tilde.c b/readline/readline/tilde.c new file mode 100644 index 0000000000..9d0f29614b --- /dev/null +++ b/readline/readline/tilde.c @@ -0,0 +1,493 @@ +/* tilde.c -- Tilde expansion code (~/foo := $HOME/foo). */ + +/* Copyright (C) 1988-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#if defined (HAVE_UNISTD_H) +# ifdef _MINIX +# include +# endif +# include +#endif + +#if defined (HAVE_STRING_H) +# include +#else /* !HAVE_STRING_H */ +# include +#endif /* !HAVE_STRING_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include +#if defined (HAVE_PWD_H) +#include +#endif + +#include "tilde.h" + +#if defined (TEST) || defined (STATIC_MALLOC) +static void *xmalloc (), *xrealloc (); +#else +# include "xmalloc.h" +#endif /* TEST || STATIC_MALLOC */ + +#if !defined (HAVE_GETPW_DECLS) +# if defined (HAVE_GETPWUID) +extern struct passwd *getpwuid PARAMS((uid_t)); +# endif +# if defined (HAVE_GETPWNAM) +extern struct passwd *getpwnam PARAMS((const char *)); +# endif +#endif /* !HAVE_GETPW_DECLS */ + +#if !defined (savestring) +#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x)) +#endif /* !savestring */ + +#if !defined (NULL) +# if defined (__STDC__) +# define NULL ((void *) 0) +# else +# define NULL 0x0 +# endif /* !__STDC__ */ +#endif /* !NULL */ + +/* If being compiled as part of bash, these will be satisfied from + variables.o. If being compiled as part of readline, they will + be satisfied from shell.o. */ +extern char *sh_get_home_dir PARAMS((void)); +extern char *sh_get_env_value PARAMS((const char *)); + +/* The default value of tilde_additional_prefixes. This is set to + whitespace preceding a tilde so that simple programs which do not + perform any word separation get desired behaviour. */ +static const char *default_prefixes[] = + { " ~", "\t~", (const char *)NULL }; + +/* The default value of tilde_additional_suffixes. This is set to + whitespace or newline so that simple programs which do not + perform any word separation get desired behaviour. */ +static const char *default_suffixes[] = + { " ", "\n", (const char *)NULL }; + +/* If non-null, this contains the address of a function that the application + wants called before trying the standard tilde expansions. The function + is called with the text sans tilde, and returns a malloc()'ed string + which is the expansion, or a NULL pointer if the expansion fails. */ +tilde_hook_func_t *tilde_expansion_preexpansion_hook = (tilde_hook_func_t *)NULL; + +/* If non-null, this contains the address of a function to call if the + standard meaning for expanding a tilde fails. The function is called + with the text (sans tilde, as in "foo"), and returns a malloc()'ed string + which is the expansion, or a NULL pointer if there is no expansion. */ +tilde_hook_func_t *tilde_expansion_failure_hook = (tilde_hook_func_t *)NULL; + +/* When non-null, this is a NULL terminated array of strings which + are duplicates for a tilde prefix. Bash uses this to expand + `=~' and `:~'. */ +char **tilde_additional_prefixes = (char **)default_prefixes; + +/* When non-null, this is a NULL terminated array of strings which match + the end of a username, instead of just "/". Bash sets this to + `:' and `=~'. */ +char **tilde_additional_suffixes = (char **)default_suffixes; + +static int tilde_find_prefix PARAMS((const char *, int *)); +static int tilde_find_suffix PARAMS((const char *)); +static char *isolate_tilde_prefix PARAMS((const char *, int *)); +static char *glue_prefix_and_suffix PARAMS((char *, const char *, int)); + +/* Find the start of a tilde expansion in STRING, and return the index of + the tilde which starts the expansion. Place the length of the text + which identified this tilde starter in LEN, excluding the tilde itself. */ +static int +tilde_find_prefix (const char *string, int *len) +{ + register int i, j, string_len; + register char **prefixes; + + prefixes = tilde_additional_prefixes; + + string_len = strlen (string); + *len = 0; + + if (*string == '\0' || *string == '~') + return (0); + + if (prefixes) + { + for (i = 0; i < string_len; i++) + { + for (j = 0; prefixes[j]; j++) + { + if (strncmp (string + i, prefixes[j], strlen (prefixes[j])) == 0) + { + *len = strlen (prefixes[j]) - 1; + return (i + *len); + } + } + } + } + return (string_len); +} + +/* Find the end of a tilde expansion in STRING, and return the index of + the character which ends the tilde definition. */ +static int +tilde_find_suffix (const char *string) +{ + register int i, j, string_len; + register char **suffixes; + + suffixes = tilde_additional_suffixes; + string_len = strlen (string); + + for (i = 0; i < string_len; i++) + { +#if defined (__MSDOS__) + if (string[i] == '/' || string[i] == '\\' /* || !string[i] */) +#else + if (string[i] == '/' /* || !string[i] */) +#endif + break; + + for (j = 0; suffixes && suffixes[j]; j++) + { + if (strncmp (string + i, suffixes[j], strlen (suffixes[j])) == 0) + return (i); + } + } + return (i); +} + +/* Return a new string which is the result of tilde expanding STRING. */ +char * +tilde_expand (const char *string) +{ + char *result; + int result_size, result_index; + + result_index = result_size = 0; + if (result = strchr (string, '~')) + result = (char *)xmalloc (result_size = (strlen (string) + 16)); + else + result = (char *)xmalloc (result_size = (strlen (string) + 1)); + + /* Scan through STRING expanding tildes as we come to them. */ + while (1) + { + register int start, end; + char *tilde_word, *expansion; + int len; + + /* Make START point to the tilde which starts the expansion. */ + start = tilde_find_prefix (string, &len); + + /* Copy the skipped text into the result. */ + if ((result_index + start + 1) > result_size) + result = (char *)xrealloc (result, 1 + (result_size += (start + 20))); + + strncpy (result + result_index, string, start); + result_index += start; + + /* Advance STRING to the starting tilde. */ + string += start; + + /* Make END be the index of one after the last character of the + username. */ + end = tilde_find_suffix (string); + + /* If both START and END are zero, we are all done. */ + if (!start && !end) + break; + + /* Expand the entire tilde word, and copy it into RESULT. */ + tilde_word = (char *)xmalloc (1 + end); + strncpy (tilde_word, string, end); + tilde_word[end] = '\0'; + string += end; + + expansion = tilde_expand_word (tilde_word); + + if (expansion == 0) + expansion = tilde_word; + else + xfree (tilde_word); + + len = strlen (expansion); +#ifdef __CYGWIN__ + /* Fix for Cygwin to prevent ~user/xxx from expanding to //xxx when + $HOME for `user' is /. On cygwin, // denotes a network drive. */ + if (len > 1 || *expansion != '/' || *string != '/') +#endif + { + if ((result_index + len + 1) > result_size) + result = (char *)xrealloc (result, 1 + (result_size += (len + 20))); + + strcpy (result + result_index, expansion); + result_index += len; + } + xfree (expansion); + } + + result[result_index] = '\0'; + + return (result); +} + +/* Take FNAME and return the tilde prefix we want expanded. If LENP is + non-null, the index of the end of the prefix into FNAME is returned in + the location it points to. */ +static char * +isolate_tilde_prefix (const char *fname, int *lenp) +{ + char *ret; + int i; + + ret = (char *)xmalloc (strlen (fname)); +#if defined (__MSDOS__) + for (i = 1; fname[i] && fname[i] != '/' && fname[i] != '\\'; i++) +#else + for (i = 1; fname[i] && fname[i] != '/'; i++) +#endif + ret[i - 1] = fname[i]; + ret[i - 1] = '\0'; + if (lenp) + *lenp = i; + return ret; +} + +#if 0 +/* Public function to scan a string (FNAME) beginning with a tilde and find + the portion of the string that should be passed to the tilde expansion + function. Right now, it just calls tilde_find_suffix and allocates new + memory, but it can be expanded to do different things later. */ +char * +tilde_find_word (const char *fname, int flags, int *lenp) +{ + int x; + char *r; + + x = tilde_find_suffix (fname); + if (x == 0) + { + r = savestring (fname); + if (lenp) + *lenp = 0; + } + else + { + r = (char *)xmalloc (1 + x); + strncpy (r, fname, x); + r[x] = '\0'; + if (lenp) + *lenp = x; + } + + return r; +} +#endif + +/* Return a string that is PREFIX concatenated with SUFFIX starting at + SUFFIND. */ +static char * +glue_prefix_and_suffix (char *prefix, const char *suffix, int suffind) +{ + char *ret; + int plen, slen; + + plen = (prefix && *prefix) ? strlen (prefix) : 0; + slen = strlen (suffix + suffind); + ret = (char *)xmalloc (plen + slen + 1); + if (plen) + strcpy (ret, prefix); + strcpy (ret + plen, suffix + suffind); + return ret; +} + +/* Do the work of tilde expansion on FILENAME. FILENAME starts with a + tilde. If there is no expansion, call tilde_expansion_failure_hook. + This always returns a newly-allocated string, never static storage. */ +char * +tilde_expand_word (const char *filename) +{ + char *dirname, *expansion, *username; + int user_len; + struct passwd *user_entry; + + if (filename == 0) + return ((char *)NULL); + + if (*filename != '~') + return (savestring (filename)); + + /* A leading `~/' or a bare `~' is *always* translated to the value of + $HOME or the home directory of the current user, regardless of any + preexpansion hook. */ + if (filename[1] == '\0' || filename[1] == '/') + { + /* Prefix $HOME to the rest of the string. */ + expansion = sh_get_env_value ("HOME"); +#if defined (_WIN32) + if (expansion == 0) + expansion = sh_get_env_value ("APPDATA"); +#endif + + /* If there is no HOME variable, look up the directory in + the password database. */ + if (expansion == 0) + expansion = sh_get_home_dir (); + + return (glue_prefix_and_suffix (expansion, filename, 1)); + } + + username = isolate_tilde_prefix (filename, &user_len); + + if (tilde_expansion_preexpansion_hook) + { + expansion = (*tilde_expansion_preexpansion_hook) (username); + if (expansion) + { + dirname = glue_prefix_and_suffix (expansion, filename, user_len); + xfree (username); + xfree (expansion); + return (dirname); + } + } + + /* No preexpansion hook, or the preexpansion hook failed. Look in the + password database. */ + dirname = (char *)NULL; +#if defined (HAVE_GETPWNAM) + user_entry = getpwnam (username); +#else + user_entry = 0; +#endif + if (user_entry == 0) + { + /* If the calling program has a special syntax for expanding tildes, + and we couldn't find a standard expansion, then let them try. */ + if (tilde_expansion_failure_hook) + { + expansion = (*tilde_expansion_failure_hook) (username); + if (expansion) + { + dirname = glue_prefix_and_suffix (expansion, filename, user_len); + xfree (expansion); + } + } + /* If we don't have a failure hook, or if the failure hook did not + expand the tilde, return a copy of what we were passed. */ + if (dirname == 0) + dirname = savestring (filename); + } +#if defined (HAVE_GETPWENT) + else + dirname = glue_prefix_and_suffix (user_entry->pw_dir, filename, user_len); +#endif + + xfree (username); +#if defined (HAVE_GETPWENT) + endpwent (); +#endif + return (dirname); +} + + +#if defined (TEST) +#undef NULL +#include + +main (int argc, char **argv) +{ + char *result, line[512]; + int done = 0; + + while (!done) + { + printf ("~expand: "); + fflush (stdout); + + if (!gets (line)) + strcpy (line, "done"); + + if ((strcmp (line, "done") == 0) || + (strcmp (line, "quit") == 0) || + (strcmp (line, "exit") == 0)) + { + done = 1; + break; + } + + result = tilde_expand (line); + printf (" --> %s\n", result); + free (result); + } + exit (0); +} + +static void memory_error_and_abort (void); + +static void * +xmalloc (size_t bytes) +{ + void *temp = (char *)malloc (bytes); + + if (!temp) + memory_error_and_abort (); + return (temp); +} + +static void * +xrealloc (void *pointer, int bytes) +{ + void *temp; + + if (!pointer) + temp = malloc (bytes); + else + temp = realloc (pointer, bytes); + + if (!temp) + memory_error_and_abort (); + + return (temp); +} + +static void +memory_error_and_abort (void) +{ + fprintf (stderr, "readline: out of virtual memory\n"); + abort (); +} + +/* + * Local variables: + * compile-command: "gcc -g -DTEST -o tilde tilde.c" + * end: + */ +#endif /* TEST */ diff --git a/readline/readline/tilde.h b/readline/readline/tilde.h new file mode 100644 index 0000000000..e26dd0476f --- /dev/null +++ b/readline/readline/tilde.h @@ -0,0 +1,80 @@ +/* tilde.h: Externally available variables and function in libtilde.a. */ + +/* Copyright (C) 1992-2009 Free Software Foundation, Inc. + + This file contains the Readline Library (Readline), a set of + routines for providing Emacs style line input to programs that ask + for it. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_TILDE_H_) +# define _TILDE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +/* A function can be defined using prototypes and compile on both ANSI C + and traditional C compilers with something like this: + extern char *func PARAMS((char *, char *, int)); */ + +#if !defined (PARAMS) +# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) +# define PARAMS(protos) protos +# else +# define PARAMS(protos) () +# endif +#endif + +typedef char *tilde_hook_func_t PARAMS((char *)); + +/* If non-null, this contains the address of a function that the application + wants called before trying the standard tilde expansions. The function + is called with the text sans tilde, and returns a malloc()'ed string + which is the expansion, or a NULL pointer if the expansion fails. */ +extern tilde_hook_func_t *tilde_expansion_preexpansion_hook; + +/* If non-null, this contains the address of a function to call if the + standard meaning for expanding a tilde fails. The function is called + with the text (sans tilde, as in "foo"), and returns a malloc()'ed string + which is the expansion, or a NULL pointer if there is no expansion. */ +extern tilde_hook_func_t *tilde_expansion_failure_hook; + +/* When non-null, this is a NULL terminated array of strings which + are duplicates for a tilde prefix. Bash uses this to expand + `=~' and `:~'. */ +extern char **tilde_additional_prefixes; + +/* When non-null, this is a NULL terminated array of strings which match + the end of a username, instead of just "/". Bash sets this to + `:' and `=~'. */ +extern char **tilde_additional_suffixes; + +/* Return a new string which is the result of tilde expanding STRING. */ +extern char *tilde_expand PARAMS((const char *)); + +/* Do the work of tilde expansion on FILENAME. FILENAME starts with a + tilde. If there is no expansion, call tilde_expansion_failure_hook. */ +extern char *tilde_expand_word PARAMS((const char *)); + +/* Find the portion of the string beginning with ~ that should be expanded. */ +extern char *tilde_find_word PARAMS((const char *, int, int *)); + +#ifdef __cplusplus +} +#endif + +#endif /* _TILDE_H_ */ diff --git a/readline/readline/undo.c b/readline/readline/undo.c new file mode 100644 index 0000000000..ae65d38043 --- /dev/null +++ b/readline/readline/undo.c @@ -0,0 +1,365 @@ +/* undo.c - manage list of changes to lines, offering opportunity to undo them */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_UNISTD_H) +# include /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" + +/* Some standard library routines. */ +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +extern void _hs_replace_history_data PARAMS((int, histdata_t *, histdata_t *)); + +extern HIST_ENTRY *_rl_saved_line_for_history; + +/* Non-zero tells rl_delete_text and rl_insert_text to not add to + the undo list. */ +int _rl_doing_an_undo = 0; + +/* How many unclosed undo groups we currently have. */ +int _rl_undo_group_level = 0; + +/* The current undo list for THE_LINE. */ +UNDO_LIST *rl_undo_list = (UNDO_LIST *)NULL; + +/* **************************************************************** */ +/* */ +/* Undo, and Undoing */ +/* */ +/* **************************************************************** */ + +static UNDO_LIST * +alloc_undo_entry (enum undo_code what, int start, int end, char *text) +{ + UNDO_LIST *temp; + + temp = (UNDO_LIST *)xmalloc (sizeof (UNDO_LIST)); + temp->what = what; + temp->start = start; + temp->end = end; + temp->text = text; + + temp->next = (UNDO_LIST *)NULL; + return temp; +} + +/* Remember how to undo something. Concatenate some undos if that + seems right. */ +void +rl_add_undo (enum undo_code what, int start, int end, char *text) +{ + UNDO_LIST *temp; + + temp = alloc_undo_entry (what, start, end, text); + temp->next = rl_undo_list; + rl_undo_list = temp; +} + +/* Free an UNDO_LIST */ +void +_rl_free_undo_list (UNDO_LIST *ul) +{ + UNDO_LIST *release; + + while (ul) + { + release = ul; + ul = ul->next; + + if (release->what == UNDO_DELETE) + xfree (release->text); + + xfree (release); + } +} + +/* Free the existing undo list. */ +void +rl_free_undo_list (void) +{ + UNDO_LIST *release, *orig_list; + + orig_list = rl_undo_list; + _rl_free_undo_list (rl_undo_list); + rl_undo_list = (UNDO_LIST *)NULL; + _hs_replace_history_data (-1, (histdata_t *)orig_list, (histdata_t *)NULL); +} + +UNDO_LIST * +_rl_copy_undo_entry (UNDO_LIST *entry) +{ + UNDO_LIST *new; + + new = alloc_undo_entry (entry->what, entry->start, entry->end, (char *)NULL); + new->text = entry->text ? savestring (entry->text) : 0; + return new; +} + +UNDO_LIST * +_rl_copy_undo_list (UNDO_LIST *head) +{ + UNDO_LIST *list, *new, *roving, *c; + + if (head == 0) + return head; + + list = head; + new = 0; + while (list) + { + c = _rl_copy_undo_entry (list); + if (new == 0) + roving = new = c; + else + { + roving->next = c; + roving = roving->next; + } + list = list->next; + } + + roving->next = 0; + return new; +} + +/* Undo the next thing in the list. Return 0 if there + is nothing to undo, or non-zero if there was. */ +int +rl_do_undo (void) +{ + UNDO_LIST *release, *search; + int waiting_for_begin, start, end; + HIST_ENTRY *cur, *temp; + +#define TRANS(i) ((i) == -1 ? rl_point : ((i) == -2 ? rl_end : (i))) + + start = end = waiting_for_begin = 0; + do + { + if (rl_undo_list == 0) + return (0); + + _rl_doing_an_undo = 1; + RL_SETSTATE(RL_STATE_UNDOING); + + /* To better support vi-mode, a start or end value of -1 means + rl_point, and a value of -2 means rl_end. */ + if (rl_undo_list->what == UNDO_DELETE || rl_undo_list->what == UNDO_INSERT) + { + start = TRANS (rl_undo_list->start); + end = TRANS (rl_undo_list->end); + } + + switch (rl_undo_list->what) + { + /* Undoing deletes means inserting some text. */ + case UNDO_DELETE: + rl_point = start; + rl_insert_text (rl_undo_list->text); + xfree (rl_undo_list->text); + break; + + /* Undoing inserts means deleting some text. */ + case UNDO_INSERT: + rl_delete_text (start, end); + rl_point = start; + break; + + /* Undoing an END means undoing everything 'til we get to a BEGIN. */ + case UNDO_END: + waiting_for_begin++; + break; + + /* Undoing a BEGIN means that we are done with this group. */ + case UNDO_BEGIN: + if (waiting_for_begin) + waiting_for_begin--; + else + rl_ding (); + break; + } + + _rl_doing_an_undo = 0; + RL_UNSETSTATE(RL_STATE_UNDOING); + + release = rl_undo_list; + rl_undo_list = rl_undo_list->next; + release->next = 0; /* XXX */ + + /* If we are editing a history entry, make sure the change is replicated + in the history entry's line */ + cur = current_history (); + if (cur && cur->data && (UNDO_LIST *)cur->data == release) + { + temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list); + xfree (temp->line); + FREE (temp->timestamp); + xfree (temp); + } + + /* Make sure there aren't any history entries with that undo list */ + _hs_replace_history_data (-1, (histdata_t *)release, (histdata_t *)rl_undo_list); + + /* And make sure this list isn't anywhere in the saved line for history */ + if (_rl_saved_line_for_history && _rl_saved_line_for_history->data) + { + /* Brute force; no finesse here */ + search = (UNDO_LIST *)_rl_saved_line_for_history->data; + if (search == release) + _rl_saved_line_for_history->data = rl_undo_list; + else + { + while (search->next) + { + if (search->next == release) + { + search->next = rl_undo_list; + break; + } + search = search->next; + } + } + } + + xfree (release); + } + while (waiting_for_begin); + + return (1); +} +#undef TRANS + +int +_rl_fix_last_undo_of_type (int type, int start, int end) +{ + UNDO_LIST *rl; + + for (rl = rl_undo_list; rl; rl = rl->next) + { + if (rl->what == type) + { + rl->start = start; + rl->end = end; + return 0; + } + } + return 1; +} + +/* Begin a group. Subsequent undos are undone as an atomic operation. */ +int +rl_begin_undo_group (void) +{ + rl_add_undo (UNDO_BEGIN, 0, 0, 0); + _rl_undo_group_level++; + return 0; +} + +/* End an undo group started with rl_begin_undo_group (). */ +int +rl_end_undo_group (void) +{ + rl_add_undo (UNDO_END, 0, 0, 0); + _rl_undo_group_level--; + return 0; +} + +/* Save an undo entry for the text from START to END. */ +int +rl_modifying (int start, int end) +{ + if (start > end) + { + SWAP (start, end); + } + + if (start != end) + { + char *temp = rl_copy_text (start, end); + rl_begin_undo_group (); + rl_add_undo (UNDO_DELETE, start, end, temp); + rl_add_undo (UNDO_INSERT, start, end, (char *)NULL); + rl_end_undo_group (); + } + return 0; +} + +/* Revert the current line to its previous state. */ +int +rl_revert_line (int count, int key) +{ + if (rl_undo_list == 0) + rl_ding (); + else + { + while (rl_undo_list) + rl_do_undo (); +#if defined (VI_MODE) + if (rl_editing_mode == vi_mode) + rl_point = rl_mark = 0; /* rl_end should be set correctly */ +#endif + } + + return 0; +} + +/* Do some undoing of things that were done. */ +int +rl_undo_command (int count, int key) +{ + if (count < 0) + return 0; /* Nothing to do. */ + + while (count) + { + if (rl_do_undo ()) + count--; + else + { + rl_ding (); + break; + } + } + return 0; +} diff --git a/readline/readline/util.c b/readline/readline/util.c new file mode 100644 index 0000000000..e8ae9d7f56 --- /dev/null +++ b/readline/readline/util.c @@ -0,0 +1,578 @@ +/* util.c -- readline utility functions */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include +#include +#include "posixjmp.h" + +#if defined (HAVE_UNISTD_H) +# include /* for _POSIX_VERSION */ +#endif /* HAVE_UNISTD_H */ + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include +#include + +/* System-specific feature definitions and include files. */ +#include "rldefs.h" +#include "rlmbutil.h" + +#if defined (TIOCSTAT_IN_SYS_IOCTL) +# include +#endif /* TIOCSTAT_IN_SYS_IOCTL */ + +/* Some standard library routines. */ +#include "readline.h" + +#include "rlprivate.h" +#include "xmalloc.h" +#include "rlshell.h" + +/* **************************************************************** */ +/* */ +/* Utility Functions */ +/* */ +/* **************************************************************** */ + +/* Return 0 if C is not a member of the class of characters that belong + in words, or 1 if it is. */ + +int _rl_allow_pathname_alphabetic_chars = 0; +static const char * const pathname_alphabetic_chars = "/-_=~.#$"; + +int +rl_alphabetic (int c) +{ + if (ALPHABETIC (c)) + return (1); + + return (_rl_allow_pathname_alphabetic_chars && + strchr (pathname_alphabetic_chars, c) != NULL); +} + +#if defined (HANDLE_MULTIBYTE) +int +_rl_walphabetic (wchar_t wc) +{ + int c; + + if (iswalnum (wc)) + return (1); + + c = wc & 0177; + return (_rl_allow_pathname_alphabetic_chars && + strchr (pathname_alphabetic_chars, c) != NULL); +} +#endif + +/* How to abort things. */ +int +_rl_abort_internal (void) +{ + rl_ding (); + rl_clear_message (); + _rl_reset_argument (); + rl_clear_pending_input (); + + RL_UNSETSTATE (RL_STATE_MACRODEF); + while (rl_executing_macro) + _rl_pop_executing_macro (); + + RL_UNSETSTATE (RL_STATE_MULTIKEY); /* XXX */ + + rl_last_func = (rl_command_func_t *)NULL; + + _rl_longjmp (_rl_top_level, 1); + return (0); +} + +int +rl_abort (int count, int key) +{ + return (_rl_abort_internal ()); +} + +int +_rl_null_function (int count, int key) +{ + return 0; +} + +int +rl_tty_status (int count, int key) +{ +#if defined (TIOCSTAT) + ioctl (1, TIOCSTAT, (char *)0); + rl_refresh_line (count, key); +#else + rl_ding (); +#endif + return 0; +} + +/* Return a copy of the string between FROM and TO. + FROM is inclusive, TO is not. */ +char * +rl_copy_text (int from, int to) +{ + register int length; + char *copy; + + /* Fix it if the caller is confused. */ + if (from > to) + SWAP (from, to); + + length = to - from; + copy = (char *)xmalloc (1 + length); + strncpy (copy, rl_line_buffer + from, length); + copy[length] = '\0'; + return (copy); +} + +/* Increase the size of RL_LINE_BUFFER until it has enough space to hold + LEN characters. */ +void +rl_extend_line_buffer (int len) +{ + while (len >= rl_line_buffer_len) + { + rl_line_buffer_len += DEFAULT_BUFFER_SIZE; + rl_line_buffer = (char *)xrealloc (rl_line_buffer, rl_line_buffer_len); + } + + _rl_set_the_line (); +} + + +/* A function for simple tilde expansion. */ +int +rl_tilde_expand (int ignore, int key) +{ + register int start, end; + char *homedir, *temp; + int len; + + end = rl_point; + start = end - 1; + + if (rl_point == rl_end && rl_line_buffer[rl_point] == '~') + { + homedir = tilde_expand ("~"); + _rl_replace_text (homedir, start, end); + xfree (homedir); + return (0); + } + else if (start >= 0 && rl_line_buffer[start] != '~') + { + for (; start >= 0 && !whitespace (rl_line_buffer[start]); start--) + ; + start++; + } + else if (start < 0) + start = 0; + + end = start; + do + end++; + while (whitespace (rl_line_buffer[end]) == 0 && end < rl_end); + + if (whitespace (rl_line_buffer[end]) || end >= rl_end) + end--; + + /* If the first character of the current word is a tilde, perform + tilde expansion and insert the result. If not a tilde, do + nothing. */ + if (rl_line_buffer[start] == '~') + { + len = end - start + 1; + temp = (char *)xmalloc (len + 1); + strncpy (temp, rl_line_buffer + start, len); + temp[len] = '\0'; + homedir = tilde_expand (temp); + xfree (temp); + + _rl_replace_text (homedir, start, end); + xfree (homedir); + } + + return (0); +} + +#if defined (USE_VARARGS) +void +#if defined (PREFER_STDARG) +_rl_ttymsg (const char *format, ...) +#else +_rl_ttymsg (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + fprintf (stderr, "readline: "); + vfprintf (stderr, format, args); + fprintf (stderr, "\n"); + fflush (stderr); + + va_end (args); + + rl_forced_update_display (); +} + +void +#if defined (PREFER_STDARG) +_rl_errmsg (const char *format, ...) +#else +_rl_errmsg (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + fprintf (stderr, "readline: "); + vfprintf (stderr, format, args); + fprintf (stderr, "\n"); + fflush (stderr); + + va_end (args); +} + +#else /* !USE_VARARGS */ +void +_rl_ttymsg (format, arg1, arg2) + char *format; +{ + fprintf (stderr, "readline: "); + fprintf (stderr, format, arg1, arg2); + fprintf (stderr, "\n"); + + rl_forced_update_display (); +} + +void +_rl_errmsg (format, arg1, arg2) + char *format; +{ + fprintf (stderr, "readline: "); + fprintf (stderr, format, arg1, arg2); + fprintf (stderr, "\n"); +} +#endif /* !USE_VARARGS */ + +/* **************************************************************** */ +/* */ +/* String Utility Functions */ +/* */ +/* **************************************************************** */ + +/* Determine if s2 occurs in s1. If so, return a pointer to the + match in s1. The compare is case insensitive. */ +char * +_rl_strindex (const char *s1, const char *s2) +{ + register int i, l, len; + + for (i = 0, l = strlen (s2), len = strlen (s1); (len - i) >= l; i++) + if (_rl_strnicmp (s1 + i, s2, l) == 0) + return ((char *) (s1 + i)); + return ((char *)NULL); +} + +#ifndef HAVE_STRPBRK +/* Find the first occurrence in STRING1 of any character from STRING2. + Return a pointer to the character in STRING1. */ +char * +_rl_strpbrk (const char *string1, const char *string2) +{ + register const char *scan; +#if defined (HANDLE_MULTIBYTE) + mbstate_t ps; + register int i, v; + + memset (&ps, 0, sizeof (mbstate_t)); +#endif + + for (; *string1; string1++) + { + for (scan = string2; *scan; scan++) + { + if (*string1 == *scan) + return ((char *)string1); + } +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + v = _rl_get_char_len (string1, &ps); + if (v > 1) + string1 += v - 1; /* -1 to account for auto-increment in loop */ + } +#endif + } + return ((char *)NULL); +} +#endif + +#if !defined (HAVE_STRCASECMP) +/* Compare at most COUNT characters from string1 to string2. Case + doesn't matter (strncasecmp). */ +int +_rl_strnicmp (const char *string1, const char *string2, int count) +{ + register const char *s1; + register const char *s2; + register int d; + + if (count <= 0 || (string1 == string2)) + return 0; + + s1 = string1; + s2 = string2; + do + { + d = _rl_to_lower (*s1) - _rl_to_lower (*s2); /* XXX - cast to unsigned char? */ + if (d != 0) + return d; + if (*s1++ == '\0') + break; + s2++; + } + while (--count != 0); + + return (0); +} + +/* strcmp (), but caseless (strcasecmp). */ +int +_rl_stricmp (const char *string1, const char *string2) +{ + register const char *s1; + register const char *s2; + register int d; + + s1 = string1; + s2 = string2; + + if (s1 == s2) + return 0; + + while ((d = _rl_to_lower (*s1) - _rl_to_lower (*s2)) == 0) + { + if (*s1++ == '\0') + return 0; + s2++; + } + + return (d); +} +#endif /* !HAVE_STRCASECMP */ + +/* Stupid comparison routine for qsort () ing strings. */ +int +_rl_qsort_string_compare (char **s1, char **s2) +{ +#if defined (HAVE_STRCOLL) + return (strcoll (*s1, *s2)); +#else + int result; + + result = **s1 - **s2; + if (result == 0) + result = strcmp (*s1, *s2); + + return result; +#endif +} + +/* Function equivalents for the macros defined in chardefs.h. */ +#define FUNCTION_FOR_MACRO(f) int (f) (int c) { return f (c); } + +FUNCTION_FOR_MACRO (_rl_digit_p) +FUNCTION_FOR_MACRO (_rl_digit_value) +FUNCTION_FOR_MACRO (_rl_lowercase_p) +FUNCTION_FOR_MACRO (_rl_pure_alphabetic) +FUNCTION_FOR_MACRO (_rl_to_lower) +FUNCTION_FOR_MACRO (_rl_to_upper) +FUNCTION_FOR_MACRO (_rl_uppercase_p) + +/* A convenience function, to force memory deallocation to be performed + by readline. DLLs on Windows apparently require this. */ +void +rl_free (void *mem) +{ + if (mem) + free (mem); +} + +/* Backwards compatibility, now that savestring has been removed from + all `public' readline header files. */ +#undef _rl_savestring +char * +_rl_savestring (const char *s) +{ + return (strcpy ((char *)xmalloc (1 + (int)strlen (s)), (s))); +} + +#if defined (DEBUG) +#if defined (USE_VARARGS) +static FILE *_rl_tracefp; + +void +#if defined (PREFER_STDARG) +_rl_trace (const char *format, ...) +#else +_rl_trace (va_alist) + va_dcl +#endif +{ + va_list args; +#if defined (PREFER_VARARGS) + char *format; +#endif + +#if defined (PREFER_STDARG) + va_start (args, format); +#else + va_start (args); + format = va_arg (args, char *); +#endif + + if (_rl_tracefp == 0) + _rl_tropen (); + vfprintf (_rl_tracefp, format, args); + fprintf (_rl_tracefp, "\n"); + fflush (_rl_tracefp); + + va_end (args); +} + +int +_rl_tropen (void) +{ + char fnbuf[128], *x; + + if (_rl_tracefp) + fclose (_rl_tracefp); +#if defined (_WIN32) && !defined (__CYGWIN__) + /* Windows doesn't have /var/tmp, so open the trace file in the + user's temporary directory instead. */ + snprintf (fnbuf, sizeof (fnbuf), "%s/rltrace.%ld", + (sh_get_env_value ("TEMP") + ? sh_get_env_value ("TEMP") + : "."), + getpid ()); +#else + sprintf (fnbuf, "/var/tmp/rltrace.%ld", (long) getpid ()); +#endif + unlink (fnbuf); + _rl_tracefp = fopen (fnbuf, "w+"); + return _rl_tracefp != 0; +} + +int +_rl_trclose (void) +{ + int r; + + r = fclose (_rl_tracefp); + _rl_tracefp = 0; + return r; +} + +void +_rl_settracefp (FILE *fp) +{ + _rl_tracefp = fp; +} +#endif +#endif /* DEBUG */ + + +#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT) +#include +#include +#include +#include + +/* Report STRING to the audit system. */ +void +_rl_audit_tty (char *string) +{ + struct audit_message req; + struct sockaddr_nl addr; + size_t size; + int fd; + + fd = socket (PF_NETLINK, SOCK_RAW, NETLINK_AUDIT); + if (fd < 0) + return; + size = strlen (string) + 1; + + if (NLMSG_SPACE (size) > MAX_AUDIT_MESSAGE_LENGTH) + return; + + memset (&req, 0, sizeof(req)); + req.nlh.nlmsg_len = NLMSG_SPACE (size); + req.nlh.nlmsg_type = AUDIT_USER_TTY; + req.nlh.nlmsg_flags = NLM_F_REQUEST; + req.nlh.nlmsg_seq = 0; + if (size && string) + memcpy (NLMSG_DATA(&req.nlh), string, size); + memset (&addr, 0, sizeof(addr)); + + addr.nl_family = AF_NETLINK; + addr.nl_pid = 0; + addr.nl_groups = 0; + + sendto (fd, &req, req.nlh.nlmsg_len, 0, (struct sockaddr*)&addr, sizeof(addr)); + close (fd); +} +#endif diff --git a/readline/readline/vi_keymap.c b/readline/readline/vi_keymap.c new file mode 100644 index 0000000000..045258bd83 --- /dev/null +++ b/readline/readline/vi_keymap.c @@ -0,0 +1,875 @@ +/* vi_keymap.c -- the keymap for vi_mode in readline (). */ + +/* Copyright (C) 1987-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (BUFSIZ) +#include +#endif /* !BUFSIZ */ + +#include "readline.h" + +#if 0 +extern KEYMAP_ENTRY_ARRAY vi_escape_keymap; +#endif + +/* The keymap arrays for handling vi mode. */ +KEYMAP_ENTRY_ARRAY vi_movement_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ + { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ + { ISFUNC, rl_emacs_editing_mode }, /* Control-e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ + { ISFUNC, rl_abort }, /* Control-g */ + { ISFUNC, rl_backward_char }, /* Control-h */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, rl_clear_screen }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_get_next_history }, /* Control-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ + { ISFUNC, rl_get_previous_history }, /* Control-p */ + { ISFUNC, rl_quoted_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_vi_unix_word_rubout }, /* Control-w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ + + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-[ */ /* vi_escape_keymap */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_forward_char }, /* SPACE */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ + { ISFUNC, rl_insert_comment }, /* # */ + { ISFUNC, rl_end_of_line }, /* $ */ + { ISFUNC, rl_vi_match }, /* % */ + { ISFUNC, rl_vi_tilde_expand }, /* & */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ( */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ) */ + { ISFUNC, rl_vi_complete }, /* * */ + { ISFUNC, rl_get_next_history}, /* + */ + { ISFUNC, rl_vi_char_search }, /* , */ + { ISFUNC, rl_get_previous_history }, /* - */ + { ISFUNC, rl_vi_redo }, /* . */ + { ISFUNC, rl_vi_search }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_beg_of_line }, /* 0 */ + { ISFUNC, rl_vi_arg_digit }, /* 1 */ + { ISFUNC, rl_vi_arg_digit }, /* 2 */ + { ISFUNC, rl_vi_arg_digit }, /* 3 */ + { ISFUNC, rl_vi_arg_digit }, /* 4 */ + { ISFUNC, rl_vi_arg_digit }, /* 5 */ + { ISFUNC, rl_vi_arg_digit }, /* 6 */ + { ISFUNC, rl_vi_arg_digit }, /* 7 */ + { ISFUNC, rl_vi_arg_digit }, /* 8 */ + { ISFUNC, rl_vi_arg_digit }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ + { ISFUNC, rl_vi_char_search }, /* ; */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ + { ISFUNC, rl_vi_complete }, /* = */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ + { ISFUNC, rl_vi_search }, /* ? */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_vi_append_eol }, /* A */ + { ISFUNC, rl_vi_prev_word}, /* B */ + { ISFUNC, rl_vi_change_to }, /* C */ + { ISFUNC, rl_vi_delete_to }, /* D */ + { ISFUNC, rl_vi_end_word }, /* E */ + { ISFUNC, rl_vi_char_search }, /* F */ + { ISFUNC, rl_vi_fetch_history }, /* G */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* H */ + { ISFUNC, rl_vi_insert_beg }, /* I */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* J */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* K */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* L */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* M */ + { ISFUNC, rl_vi_search_again }, /* N */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* O */ + { ISFUNC, rl_vi_put }, /* P */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Q */ + { ISFUNC, rl_vi_replace }, /* R */ + { ISFUNC, rl_vi_subst }, /* S */ + { ISFUNC, rl_vi_char_search }, /* T */ + { ISFUNC, rl_revert_line }, /* U */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* V */ + { ISFUNC, rl_vi_next_word }, /* W */ + { ISFUNC, rl_vi_rubout }, /* X */ + { ISFUNC, rl_vi_yank_to }, /* Y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* [ */ + { ISFUNC, rl_vi_complete }, /* \ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ + { ISFUNC, rl_vi_first_print }, /* ^ */ + { ISFUNC, rl_vi_yank_arg }, /* _ */ + { ISFUNC, rl_vi_goto_mark }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_vi_append_mode }, /* a */ + { ISFUNC, rl_vi_prev_word }, /* b */ + { ISFUNC, rl_vi_change_to }, /* c */ + { ISFUNC, rl_vi_delete_to }, /* d */ + { ISFUNC, rl_vi_end_word }, /* e */ + { ISFUNC, rl_vi_char_search }, /* f */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ + { ISFUNC, rl_backward_char }, /* h */ + { ISFUNC, rl_vi_insert_mode }, /* i */ + { ISFUNC, rl_get_next_history }, /* j */ + { ISFUNC, rl_get_previous_history }, /* k */ + { ISFUNC, rl_forward_char }, /* l */ + { ISFUNC, rl_vi_set_mark }, /* m */ + { ISFUNC, rl_vi_search_again }, /* n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* o */ + { ISFUNC, rl_vi_put }, /* p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ + { ISFUNC, rl_vi_change_char }, /* r */ + { ISFUNC, rl_vi_subst }, /* s */ + { ISFUNC, rl_vi_char_search }, /* t */ + { ISFUNC, rl_vi_undo }, /* u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ + { ISFUNC, rl_vi_next_word }, /* w */ + { ISFUNC, rl_vi_delete }, /* x */ + { ISFUNC, rl_vi_yank_to }, /* y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ + { ISFUNC, rl_vi_column }, /* | */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ + { ISFUNC, rl_vi_change_case }, /* ~ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; + +KEYMAP_ENTRY_ARRAY vi_insertion_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ + { ISFUNC, rl_insert }, /* Control-a */ + { ISFUNC, rl_insert }, /* Control-b */ + { ISFUNC, rl_insert }, /* Control-c */ + { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ + { ISFUNC, rl_insert }, /* Control-e */ + { ISFUNC, rl_insert }, /* Control-f */ + { ISFUNC, rl_insert }, /* Control-g */ + { ISFUNC, rl_rubout }, /* Control-h */ + { ISFUNC, rl_complete }, /* Control-i */ + { ISFUNC, rl_newline }, /* Control-j */ + { ISFUNC, rl_insert }, /* Control-k */ + { ISFUNC, rl_insert }, /* Control-l */ + { ISFUNC, rl_newline }, /* Control-m */ + { ISFUNC, rl_menu_complete}, /* Control-n */ + { ISFUNC, rl_insert }, /* Control-o */ + { ISFUNC, rl_backward_menu_complete }, /* Control-p */ + { ISFUNC, rl_insert }, /* Control-q */ + { ISFUNC, rl_reverse_search_history }, /* Control-r */ + { ISFUNC, rl_forward_search_history }, /* Control-s */ + { ISFUNC, rl_transpose_chars }, /* Control-t */ + { ISFUNC, rl_unix_line_discard }, /* Control-u */ + { ISFUNC, rl_quoted_insert }, /* Control-v */ + { ISFUNC, rl_vi_unix_word_rubout }, /* Control-w */ + { ISFUNC, rl_insert }, /* Control-x */ + { ISFUNC, rl_yank }, /* Control-y */ + { ISFUNC, rl_insert }, /* Control-z */ + + { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ + { ISFUNC, rl_insert }, /* Control-\ */ + { ISFUNC, rl_insert }, /* Control-] */ + { ISFUNC, rl_insert }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, rl_insert }, /* SPACE */ + { ISFUNC, rl_insert }, /* ! */ + { ISFUNC, rl_insert }, /* " */ + { ISFUNC, rl_insert }, /* # */ + { ISFUNC, rl_insert }, /* $ */ + { ISFUNC, rl_insert }, /* % */ + { ISFUNC, rl_insert }, /* & */ + { ISFUNC, rl_insert }, /* ' */ + { ISFUNC, rl_insert }, /* ( */ + { ISFUNC, rl_insert }, /* ) */ + { ISFUNC, rl_insert }, /* * */ + { ISFUNC, rl_insert }, /* + */ + { ISFUNC, rl_insert }, /* , */ + { ISFUNC, rl_insert }, /* - */ + { ISFUNC, rl_insert }, /* . */ + { ISFUNC, rl_insert }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_insert }, /* 0 */ + { ISFUNC, rl_insert }, /* 1 */ + { ISFUNC, rl_insert }, /* 2 */ + { ISFUNC, rl_insert }, /* 3 */ + { ISFUNC, rl_insert }, /* 4 */ + { ISFUNC, rl_insert }, /* 5 */ + { ISFUNC, rl_insert }, /* 6 */ + { ISFUNC, rl_insert }, /* 7 */ + { ISFUNC, rl_insert }, /* 8 */ + { ISFUNC, rl_insert }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, rl_insert }, /* : */ + { ISFUNC, rl_insert }, /* ; */ + { ISFUNC, rl_insert }, /* < */ + { ISFUNC, rl_insert }, /* = */ + { ISFUNC, rl_insert }, /* > */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_insert }, /* A */ + { ISFUNC, rl_insert }, /* B */ + { ISFUNC, rl_insert }, /* C */ + { ISFUNC, rl_insert }, /* D */ + { ISFUNC, rl_insert }, /* E */ + { ISFUNC, rl_insert }, /* F */ + { ISFUNC, rl_insert }, /* G */ + { ISFUNC, rl_insert }, /* H */ + { ISFUNC, rl_insert }, /* I */ + { ISFUNC, rl_insert }, /* J */ + { ISFUNC, rl_insert }, /* K */ + { ISFUNC, rl_insert }, /* L */ + { ISFUNC, rl_insert }, /* M */ + { ISFUNC, rl_insert }, /* N */ + { ISFUNC, rl_insert }, /* O */ + { ISFUNC, rl_insert }, /* P */ + { ISFUNC, rl_insert }, /* Q */ + { ISFUNC, rl_insert }, /* R */ + { ISFUNC, rl_insert }, /* S */ + { ISFUNC, rl_insert }, /* T */ + { ISFUNC, rl_insert }, /* U */ + { ISFUNC, rl_insert }, /* V */ + { ISFUNC, rl_insert }, /* W */ + { ISFUNC, rl_insert }, /* X */ + { ISFUNC, rl_insert }, /* Y */ + { ISFUNC, rl_insert }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_insert }, /* [ */ + { ISFUNC, rl_insert }, /* \ */ + { ISFUNC, rl_insert }, /* ] */ + { ISFUNC, rl_insert }, /* ^ */ + { ISFUNC, rl_insert }, /* _ */ + { ISFUNC, rl_insert }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, rl_insert }, /* a */ + { ISFUNC, rl_insert }, /* b */ + { ISFUNC, rl_insert }, /* c */ + { ISFUNC, rl_insert }, /* d */ + { ISFUNC, rl_insert }, /* e */ + { ISFUNC, rl_insert }, /* f */ + { ISFUNC, rl_insert }, /* g */ + { ISFUNC, rl_insert }, /* h */ + { ISFUNC, rl_insert }, /* i */ + { ISFUNC, rl_insert }, /* j */ + { ISFUNC, rl_insert }, /* k */ + { ISFUNC, rl_insert }, /* l */ + { ISFUNC, rl_insert }, /* m */ + { ISFUNC, rl_insert }, /* n */ + { ISFUNC, rl_insert }, /* o */ + { ISFUNC, rl_insert }, /* p */ + { ISFUNC, rl_insert }, /* q */ + { ISFUNC, rl_insert }, /* r */ + { ISFUNC, rl_insert }, /* s */ + { ISFUNC, rl_insert }, /* t */ + { ISFUNC, rl_insert }, /* u */ + { ISFUNC, rl_insert }, /* v */ + { ISFUNC, rl_insert }, /* w */ + { ISFUNC, rl_insert }, /* x */ + { ISFUNC, rl_insert }, /* y */ + { ISFUNC, rl_insert }, /* z */ + + /* Final punctuation. */ + { ISFUNC, rl_insert }, /* { */ + { ISFUNC, rl_insert }, /* | */ + { ISFUNC, rl_insert }, /* } */ + { ISFUNC, rl_insert }, /* ~ */ + { ISFUNC, rl_rubout }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Pure 8-bit characters (128 - 159). + These might be used in some + character sets. */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + { ISFUNC, rl_insert }, /* ? */ + + /* ISO Latin-1 characters (160 - 255) */ + { ISFUNC, rl_insert }, /* No-break space */ + { ISFUNC, rl_insert }, /* Inverted exclamation mark */ + { ISFUNC, rl_insert }, /* Cent sign */ + { ISFUNC, rl_insert }, /* Pound sign */ + { ISFUNC, rl_insert }, /* Currency sign */ + { ISFUNC, rl_insert }, /* Yen sign */ + { ISFUNC, rl_insert }, /* Broken bar */ + { ISFUNC, rl_insert }, /* Section sign */ + { ISFUNC, rl_insert }, /* Diaeresis */ + { ISFUNC, rl_insert }, /* Copyright sign */ + { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ + { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Not sign */ + { ISFUNC, rl_insert }, /* Soft hyphen */ + { ISFUNC, rl_insert }, /* Registered sign */ + { ISFUNC, rl_insert }, /* Macron */ + { ISFUNC, rl_insert }, /* Degree sign */ + { ISFUNC, rl_insert }, /* Plus-minus sign */ + { ISFUNC, rl_insert }, /* Superscript two */ + { ISFUNC, rl_insert }, /* Superscript three */ + { ISFUNC, rl_insert }, /* Acute accent */ + { ISFUNC, rl_insert }, /* Micro sign */ + { ISFUNC, rl_insert }, /* Pilcrow sign */ + { ISFUNC, rl_insert }, /* Middle dot */ + { ISFUNC, rl_insert }, /* Cedilla */ + { ISFUNC, rl_insert }, /* Superscript one */ + { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ + { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ + { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ + { ISFUNC, rl_insert }, /* Vulgar fraction one half */ + { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ + { ISFUNC, rl_insert }, /* Inverted questionk mark */ + { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin capital letter ae */ + { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Multiplication sign */ + { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ + { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ + { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ + { ISFUNC, rl_insert }, /* Latin small letter a with grave */ + { ISFUNC, rl_insert }, /* Latin small letter a with acute */ + { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ + { ISFUNC, rl_insert }, /* Latin small letter ae */ + { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ + { ISFUNC, rl_insert }, /* Latin small letter e with grave */ + { ISFUNC, rl_insert }, /* Latin small letter e with acute */ + { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter i with grave */ + { ISFUNC, rl_insert }, /* Latin small letter i with acute */ + { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ + { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with grave */ + { ISFUNC, rl_insert }, /* Latin small letter o with acute */ + { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ + { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ + { ISFUNC, rl_insert }, /* Division sign */ + { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ + { ISFUNC, rl_insert }, /* Latin small letter u with grave */ + { ISFUNC, rl_insert }, /* Latin small letter u with acute */ + { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ + { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ + { ISFUNC, rl_insert }, /* Latin small letter y with acute */ + { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ + { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ +#endif /* KEYMAP_SIZE > 128 */ +}; + +/* Unused for the time being. */ +#if 0 +KEYMAP_ENTRY_ARRAY vi_escape_keymap = { + /* The regular control keys come first. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-d */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-g */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-h */ + { ISFUNC, rl_tab_insert}, /* Control-i */ + { ISFUNC, rl_emacs_editing_mode}, /* Control-j */ + { ISFUNC, rl_kill_line }, /* Control-k */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-l */ + { ISFUNC, rl_emacs_editing_mode}, /* Control-m */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-n */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-q */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-s */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-t */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-x */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ + + { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ + { ISFUNC, rl_vi_undo }, /* Control-_ */ + + /* The start of printing characters. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* SPACE */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* # */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* $ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* % */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* & */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ( */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ) */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* * */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* + */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* , */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* - */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* . */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* / */ + + /* Regular digits. */ + { ISFUNC, rl_vi_arg_digit }, /* 0 */ + { ISFUNC, rl_vi_arg_digit }, /* 1 */ + { ISFUNC, rl_vi_arg_digit }, /* 2 */ + { ISFUNC, rl_vi_arg_digit }, /* 3 */ + { ISFUNC, rl_vi_arg_digit }, /* 4 */ + { ISFUNC, rl_vi_arg_digit }, /* 5 */ + { ISFUNC, rl_vi_arg_digit }, /* 6 */ + { ISFUNC, rl_vi_arg_digit }, /* 7 */ + { ISFUNC, rl_vi_arg_digit }, /* 8 */ + { ISFUNC, rl_vi_arg_digit }, /* 9 */ + + /* A little more punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ; */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* = */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ? */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ + + /* Uppercase alphabet. */ + { ISFUNC, rl_do_lowercase_version }, /* A */ + { ISFUNC, rl_do_lowercase_version }, /* B */ + { ISFUNC, rl_do_lowercase_version }, /* C */ + { ISFUNC, rl_do_lowercase_version }, /* D */ + { ISFUNC, rl_do_lowercase_version }, /* E */ + { ISFUNC, rl_do_lowercase_version }, /* F */ + { ISFUNC, rl_do_lowercase_version }, /* G */ + { ISFUNC, rl_do_lowercase_version }, /* H */ + { ISFUNC, rl_do_lowercase_version }, /* I */ + { ISFUNC, rl_do_lowercase_version }, /* J */ + { ISFUNC, rl_do_lowercase_version }, /* K */ + { ISFUNC, rl_do_lowercase_version }, /* L */ + { ISFUNC, rl_do_lowercase_version }, /* M */ + { ISFUNC, rl_do_lowercase_version }, /* N */ + { ISFUNC, rl_do_lowercase_version }, /* O */ + { ISFUNC, rl_do_lowercase_version }, /* P */ + { ISFUNC, rl_do_lowercase_version }, /* Q */ + { ISFUNC, rl_do_lowercase_version }, /* R */ + { ISFUNC, rl_do_lowercase_version }, /* S */ + { ISFUNC, rl_do_lowercase_version }, /* T */ + { ISFUNC, rl_do_lowercase_version }, /* U */ + { ISFUNC, rl_do_lowercase_version }, /* V */ + { ISFUNC, rl_do_lowercase_version }, /* W */ + { ISFUNC, rl_do_lowercase_version }, /* X */ + { ISFUNC, rl_do_lowercase_version }, /* Y */ + { ISFUNC, rl_do_lowercase_version }, /* Z */ + + /* Some more punctuation. */ + { ISFUNC, rl_arrow_keys }, /* [ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* \ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ^ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* _ */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ` */ + + /* Lowercase alphabet. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* a */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* b */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* c */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* d */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* e */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* f */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* h */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* i */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* j */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* k */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* l */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* m */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* n */ + { ISFUNC, rl_arrow_keys }, /* o */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* p */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* r */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* s */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* t */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* u */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* w */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* x */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* y */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ + + /* Final punctuation. */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* | */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ + { ISFUNC, (rl_command_func_t *)0x0 }, /* ~ */ + { ISFUNC, rl_backward_kill_word }, /* RUBOUT */ + +#if KEYMAP_SIZE > 128 + /* Undefined keys. */ + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 }, + { ISFUNC, (rl_command_func_t *)0x0 } +#endif /* KEYMAP_SIZE > 128 */ +}; +#endif diff --git a/readline/readline/vi_mode.c b/readline/readline/vi_mode.c new file mode 100644 index 0000000000..836371c95f --- /dev/null +++ b/readline/readline/vi_mode.c @@ -0,0 +1,2314 @@ +/* vi_mode.c -- A vi emulation mode for Bash. + Derived from code written by Jeff Sparkes (jsparkes@bnr.ca). */ + +/* Copyright (C) 1987-2018 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +/* **************************************************************** */ +/* */ +/* VI Emulation Mode */ +/* */ +/* **************************************************************** */ +#include "rlconf.h" + +#if defined (VI_MODE) + +#if defined (HAVE_CONFIG_H) +# include +#endif + +#include + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#if defined (HAVE_UNISTD_H) +# include +#endif + +#include + +/* Some standard library routines. */ +#include "rldefs.h" +#include "rlmbutil.h" + +#include "readline.h" +#include "history.h" + +#include "rlprivate.h" +#include "xmalloc.h" + +#ifndef member +#define member(c, s) ((c) ? (char *)strchr ((s), (c)) != (char *)NULL : 0) +#endif + +/* Increment START to the next character in RL_LINE_BUFFER, handling multibyte chars */ +#if defined (HANDLE_MULTIBYTE) +#define INCREMENT_POS(start) \ + do { \ + if (MB_CUR_MAX == 1 || rl_byte_oriented) \ + start++; \ + else \ + start = _rl_find_next_mbchar (rl_line_buffer, start, 1, MB_FIND_ANY); \ + } while (0) +#else /* !HANDLE_MULTIBYTE */ +#define INCREMENT_POS(start) (start)++ +#endif /* !HANDLE_MULTIBYTE */ + +/* This is global so other parts of the code can check whether the last + command was a text modification command. */ +int _rl_vi_last_command = 'i'; /* default `.' puts you in insert mode */ + +_rl_vimotion_cxt *_rl_vimvcxt = 0; + +/* Non-zero indicates we are redoing a vi-mode command with `.' */ +int _rl_vi_redoing; + +/* Non-zero means enter insertion mode. */ +static int _rl_vi_doing_insert; + +/* Command keys which do movement for xxx_to commands. */ +static const char * const vi_motion = " hl^$0ftFT;,%wbeWBE|`"; + +/* Keymap used for vi replace characters. Created dynamically since + rarely used. */ +static Keymap vi_replace_map; + +/* The number of characters inserted in the last replace operation. */ +static int vi_replace_count; + +/* If non-zero, we have text inserted after a c[motion] command that put + us implicitly into insert mode. Some people want this text to be + attached to the command so that it is `redoable' with `.'. */ +static int vi_continued_command; +static char *vi_insert_buffer; +static int vi_insert_buffer_size; + +static int _rl_vi_last_repeat = 1; +static int _rl_vi_last_arg_sign = 1; +static int _rl_vi_last_motion; +#if defined (HANDLE_MULTIBYTE) +static char _rl_vi_last_search_mbchar[MB_LEN_MAX]; +static int _rl_vi_last_search_mblen; +#else +static int _rl_vi_last_search_char; +#endif +static char _rl_vi_last_replacement[MB_LEN_MAX+1]; /* reserve for trailing NULL */ + +static int _rl_vi_last_key_before_insert; + +/* Text modification commands. These are the `redoable' commands. */ +static const char * const vi_textmod = "_*\\AaIiCcDdPpYyRrSsXx~"; + +/* Arrays for the saved marks. */ +static int vi_mark_chars['z' - 'a' + 1]; + +static void _rl_vi_replace_insert PARAMS((int)); +static void _rl_vi_save_replace PARAMS((void)); +static void _rl_vi_stuff_insert PARAMS((int)); +static void _rl_vi_save_insert PARAMS((UNDO_LIST *)); + +static void vi_save_insert_buffer PARAMS ((int, int)); + +static inline void _rl_vi_backup PARAMS((void)); + +static int _rl_vi_arg_dispatch PARAMS((int)); +static int rl_digit_loop1 PARAMS((void)); + +static int _rl_vi_set_mark PARAMS((void)); +static int _rl_vi_goto_mark PARAMS((void)); + +static inline int _rl_vi_advance_point PARAMS((void)); +static inline int _rl_vi_backup_point PARAMS((void)); + +static void _rl_vi_append_forward PARAMS((int)); + +static int _rl_vi_callback_getchar PARAMS((char *, int)); + +#if defined (READLINE_CALLBACKS) +static int _rl_vi_callback_set_mark PARAMS((_rl_callback_generic_arg *)); +static int _rl_vi_callback_goto_mark PARAMS((_rl_callback_generic_arg *)); +static int _rl_vi_callback_change_char PARAMS((_rl_callback_generic_arg *)); +static int _rl_vi_callback_char_search PARAMS((_rl_callback_generic_arg *)); +#endif + +static int rl_domove_read_callback PARAMS((_rl_vimotion_cxt *)); +static int rl_domove_motion_callback PARAMS((_rl_vimotion_cxt *)); +static int rl_vi_domove_getchar PARAMS((_rl_vimotion_cxt *)); + +static int vi_change_dispatch PARAMS((_rl_vimotion_cxt *)); +static int vi_delete_dispatch PARAMS((_rl_vimotion_cxt *)); +static int vi_yank_dispatch PARAMS((_rl_vimotion_cxt *)); + +static int vidomove_dispatch PARAMS((_rl_vimotion_cxt *)); + +void +_rl_vi_initialize_line (void) +{ + register int i, n; + + n = sizeof (vi_mark_chars) / sizeof (vi_mark_chars[0]); + for (i = 0; i < n; i++) + vi_mark_chars[i] = -1; + + RL_UNSETSTATE(RL_STATE_VICMDONCE); +} + +void +_rl_vi_reset_last (void) +{ + _rl_vi_last_command = 'i'; + _rl_vi_last_repeat = 1; + _rl_vi_last_arg_sign = 1; + _rl_vi_last_motion = 0; +} + +void +_rl_vi_set_last (int key, int repeat, int sign) +{ + _rl_vi_last_command = key; + _rl_vi_last_repeat = repeat; + _rl_vi_last_arg_sign = sign; +} + +/* A convenience function that calls _rl_vi_set_last to save the last command + information and enters insertion mode. */ +void +rl_vi_start_inserting (int key, int repeat, int sign) +{ + _rl_vi_set_last (key, repeat, sign); + rl_begin_undo_group (); /* ensure inserts aren't concatenated */ + rl_vi_insertion_mode (1, key); +} + +/* Is the command C a VI mode text modification command? */ +int +_rl_vi_textmod_command (int c) +{ + return (member (c, vi_textmod)); +} + +int +_rl_vi_motion_command (int c) +{ + return (member (c, vi_motion)); +} + +static void +_rl_vi_replace_insert (int count) +{ + int nchars; + + nchars = strlen (vi_insert_buffer); + + rl_begin_undo_group (); + while (count--) + /* nchars-1 to compensate for _rl_replace_text using `end+1' in call + to rl_delete_text */ + _rl_replace_text (vi_insert_buffer, rl_point, rl_point+nchars-1); + rl_end_undo_group (); +} + +static void +_rl_vi_stuff_insert (int count) +{ + rl_begin_undo_group (); + while (count--) + rl_insert_text (vi_insert_buffer); + rl_end_undo_group (); +} + +/* Bound to `.'. Called from command mode, so we know that we have to + redo a text modification command. The default for _rl_vi_last_command + puts you back into insert mode. */ +int +rl_vi_redo (int count, int c) +{ + int r; + + if (rl_explicit_arg == 0) + { + rl_numeric_arg = _rl_vi_last_repeat; + rl_arg_sign = _rl_vi_last_arg_sign; + } + + r = 0; + _rl_vi_redoing = 1; + /* If we're redoing an insert with `i', stuff in the inserted text + and do not go into insertion mode. */ + if (_rl_vi_last_command == 'i' && vi_insert_buffer && *vi_insert_buffer) + { + _rl_vi_stuff_insert (count); + /* And back up point over the last character inserted. */ + if (rl_point > 0) + _rl_vi_backup (); + } + else if (_rl_vi_last_command == 'R' && vi_insert_buffer && *vi_insert_buffer) + { + _rl_vi_replace_insert (count); + /* And back up point over the last character inserted. */ + if (rl_point > 0) + _rl_vi_backup (); + } + /* Ditto for redoing an insert with `I', but move to the beginning of the + line like the `I' command does. */ + else if (_rl_vi_last_command == 'I' && vi_insert_buffer && *vi_insert_buffer) + { + rl_beg_of_line (1, 'I'); + _rl_vi_stuff_insert (count); + if (rl_point > 0) + _rl_vi_backup (); + } + /* Ditto for redoing an insert with `a', but move forward a character first + like the `a' command does. */ + else if (_rl_vi_last_command == 'a' && vi_insert_buffer && *vi_insert_buffer) + { + _rl_vi_append_forward ('a'); + _rl_vi_stuff_insert (count); + if (rl_point > 0) + _rl_vi_backup (); + } + /* Ditto for redoing an insert with `A', but move to the end of the line + like the `A' command does. */ + else if (_rl_vi_last_command == 'A' && vi_insert_buffer && *vi_insert_buffer) + { + rl_end_of_line (1, 'A'); + _rl_vi_stuff_insert (count); + if (rl_point > 0) + _rl_vi_backup (); + } + else + r = _rl_dispatch (_rl_vi_last_command, _rl_keymap); + + _rl_vi_redoing = 0; + + return (r); +} + +/* A placeholder for further expansion. */ +int +rl_vi_undo (int count, int key) +{ + return (rl_undo_command (count, key)); +} + +/* Yank the nth arg from the previous line into this line at point. */ +int +rl_vi_yank_arg (int count, int key) +{ + /* Readline thinks that the first word on a line is the 0th, while vi + thinks the first word on a line is the 1st. Compensate. */ + if (rl_explicit_arg) + rl_yank_nth_arg (count - 1, 0); + else + rl_yank_nth_arg ('$', 0); + + return (0); +} + +/* With an argument, move back that many history lines, else move to the + beginning of history. */ +int +rl_vi_fetch_history (int count, int c) +{ + int wanted; + + /* Giving an argument of n means we want the nth command in the history + file. The command number is interpreted the same way that the bash + `history' command does it -- that is, giving an argument count of 450 + to this command would get the command listed as number 450 in the + output of `history'. */ + if (rl_explicit_arg) + { + wanted = history_base + where_history () - count; + if (wanted <= 0) + rl_beginning_of_history (0, 0); + else + rl_get_previous_history (wanted, c); + } + else + rl_beginning_of_history (count, 0); + return (0); +} + +/* Search again for the last thing searched for. */ +int +rl_vi_search_again (int count, int key) +{ + switch (key) + { + case 'n': + rl_noninc_reverse_search_again (count, key); + break; + + case 'N': + rl_noninc_forward_search_again (count, key); + break; + } + return (0); +} + +/* Do a vi style search. */ +int +rl_vi_search (int count, int key) +{ + switch (key) + { + case '?': + _rl_free_saved_history_line (); + rl_noninc_forward_search (count, key); + break; + + case '/': + _rl_free_saved_history_line (); + rl_noninc_reverse_search (count, key); + break; + + default: + rl_ding (); + break; + } + return (0); +} + +/* Completion, from vi's point of view. */ +int +rl_vi_complete (int ignore, int key) +{ + if ((rl_point < rl_end) && (!whitespace (rl_line_buffer[rl_point]))) + { + if (!whitespace (rl_line_buffer[rl_point + 1])) + rl_vi_end_word (1, 'E'); + _rl_vi_advance_point (); + } + + if (key == '*') + rl_complete_internal ('*'); /* Expansion and replacement. */ + else if (key == '=') + rl_complete_internal ('?'); /* List possible completions. */ + else if (key == '\\') + rl_complete_internal (TAB); /* Standard Readline completion. */ + else + rl_complete (0, key); + + if (key == '*' || key == '\\') + rl_vi_start_inserting (key, 1, rl_arg_sign); + + return (0); +} + +/* Tilde expansion for vi mode. */ +int +rl_vi_tilde_expand (int ignore, int key) +{ + rl_tilde_expand (0, key); + rl_vi_start_inserting (key, 1, rl_arg_sign); + return (0); +} + +/* Previous word in vi mode. */ +int +rl_vi_prev_word (int count, int key) +{ + if (count < 0) + return (rl_vi_next_word (-count, key)); + + if (rl_point == 0) + { + rl_ding (); + return (0); + } + + if (_rl_uppercase_p (key)) + rl_vi_bWord (count, key); + else + rl_vi_bword (count, key); + + return (0); +} + +/* Next word in vi mode. */ +int +rl_vi_next_word (int count, int key) +{ + if (count < 0) + return (rl_vi_prev_word (-count, key)); + + if (rl_point >= (rl_end - 1)) + { + rl_ding (); + return (0); + } + + if (_rl_uppercase_p (key)) + rl_vi_fWord (count, key); + else + rl_vi_fword (count, key); + return (0); +} + +static inline int +_rl_vi_advance_point (void) +{ + int point; + + point = rl_point; + if (rl_point < rl_end) +#if defined (HANDLE_MULTIBYTE) + { + if (MB_CUR_MAX == 1 || rl_byte_oriented) + rl_point++; + else + { + point = rl_point; + rl_point = _rl_forward_char_internal (1); + if (point == rl_point || rl_point > rl_end) + rl_point = rl_end; + } + } +#else + rl_point++; +#endif + + return point; +} + +/* Move the cursor back one character. */ +static inline void +_rl_vi_backup (void) +{ + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); + else + rl_point--; +} + +/* Move the point back one character, returning the starting value and not + doing anything at the beginning of the line */ +static inline int +_rl_vi_backup_point (void) +{ + int point; + + point = rl_point; + if (rl_point > 0) +#if defined (HANDLE_MULTIBYTE) + { + if (MB_CUR_MAX == 1 || rl_byte_oriented) + rl_point--; + else + { + point = rl_point; + rl_point = _rl_backward_char_internal (1); + if (rl_point < 0) + rl_point = 0; /* XXX - not really necessary */ + } + } +#else + rl_point--; +#endif + return point; +} + +/* Move to the end of the ?next? word. */ +int +rl_vi_end_word (int count, int key) +{ + if (count < 0) + { + rl_ding (); + return 1; + } + + if (_rl_uppercase_p (key)) + rl_vi_eWord (count, key); + else + rl_vi_eword (count, key); + return (0); +} + +/* Move forward a word the way that 'W' does. */ +int +rl_vi_fWord (int count, int ignore) +{ + while (count-- && rl_point < (rl_end - 1)) + { + /* Skip until whitespace. */ + while (!whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + _rl_vi_advance_point (); + + /* Now skip whitespace. */ + while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + _rl_vi_advance_point (); + } + return (0); +} + +int +rl_vi_bWord (int count, int ignore) +{ + while (count-- && rl_point > 0) + { + /* If we are at the start of a word, move back to whitespace so + we will go back to the start of the previous word. */ + if (!whitespace (rl_line_buffer[rl_point]) && + whitespace (rl_line_buffer[rl_point - 1])) + rl_point--; + + while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) + _rl_vi_backup_point (); + + if (rl_point > 0) + { + do + _rl_vi_backup_point (); + while (rl_point > 0 && !whitespace (rl_line_buffer[rl_point])); + if (rl_point > 0) /* hit whitespace */ + rl_point++; + + if (rl_point < 0) + rl_point = 0; + } + } + return (0); +} + +int +rl_vi_eWord (int count, int ignore) +{ + int opoint; + + while (count-- && rl_point < (rl_end - 1)) + { + if (whitespace (rl_line_buffer[rl_point]) == 0) + _rl_vi_advance_point (); + + /* Move to the next non-whitespace character (to the start of the + next word). */ + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + _rl_vi_advance_point (); + + if (rl_point && rl_point < rl_end) + { + opoint = rl_point; + + /* Skip whitespace. */ + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + opoint = _rl_vi_advance_point (); /* XXX - why? */ + + /* Skip until whitespace. */ + while (rl_point < rl_end && !whitespace (rl_line_buffer[rl_point])) + opoint = _rl_vi_advance_point (); + + /* Move back to the last character of the word. */ + rl_point = opoint; + } + } + return (0); +} + +int +rl_vi_fword (int count, int ignore) +{ + int opoint; + + while (count-- && rl_point < (rl_end - 1)) + { + /* Move to white space (really non-identifer). */ + if (_rl_isident (rl_line_buffer[rl_point])) + { + while (_rl_isident (rl_line_buffer[rl_point]) && rl_point < rl_end) + _rl_vi_advance_point (); + } + else /* if (!whitespace (rl_line_buffer[rl_point])) */ + { + while (!_rl_isident (rl_line_buffer[rl_point]) && + !whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + _rl_vi_advance_point (); + } + + opoint = rl_point; + + /* Move past whitespace. */ + while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) + opoint = _rl_vi_advance_point (); + } + return (0); +} + +int +rl_vi_bword (int count, int ignore) +{ + int opoint; + + while (count-- && rl_point > 0) + { + int prev_is_ident, cur_is_ident; + + /* If we are at the start of a word, move back to whitespace + so we will go back to the start of the previous word. */ + if (!whitespace (rl_line_buffer[rl_point]) && + whitespace (rl_line_buffer[rl_point - 1])) + if (--rl_point == 0) + break; + + /* If this character and the previous character are `opposite', move + back so we don't get messed up by the rl_point++ down there in + the while loop. Without this code, words like `l;' screw up the + function. */ + cur_is_ident = _rl_isident (rl_line_buffer[rl_point]); + opoint = _rl_vi_backup_point (); + prev_is_ident = _rl_isident (rl_line_buffer[rl_point]); + if ((cur_is_ident && !prev_is_ident) || (!cur_is_ident && prev_is_ident)) + ; /* leave point alone, we backed it up one character */ + else + rl_point = opoint; + + while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) + _rl_vi_backup_point (); + + if (rl_point > 0) + { + opoint = rl_point; + if (_rl_isident (rl_line_buffer[rl_point])) + do + opoint = _rl_vi_backup_point (); + while (rl_point > 0 && _rl_isident (rl_line_buffer[rl_point])); + else + do + opoint = _rl_vi_backup_point (); + while (rl_point > 0 && !_rl_isident (rl_line_buffer[rl_point]) && + !whitespace (rl_line_buffer[rl_point])); + + if (rl_point > 0) + rl_point = opoint; + + if (rl_point < 0) + rl_point = 0; + } + } + return (0); +} + +int +rl_vi_eword (int count, int ignore) +{ + int opoint; + + while (count-- && rl_point < (rl_end - 1)) + { + if (whitespace (rl_line_buffer[rl_point]) == 0) + _rl_vi_advance_point (); + + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + _rl_vi_advance_point (); + + opoint = rl_point; + if (rl_point < rl_end) + { + if (_rl_isident (rl_line_buffer[rl_point])) + do + { + opoint = _rl_vi_advance_point (); + } + while (rl_point < rl_end && _rl_isident (rl_line_buffer[rl_point])); + else + do + { + opoint = _rl_vi_advance_point (); + } + while (rl_point < rl_end && !_rl_isident (rl_line_buffer[rl_point]) + && !whitespace (rl_line_buffer[rl_point])); + } + rl_point = opoint; + } + return (0); +} + +int +rl_vi_insert_beg (int count, int key) +{ + rl_beg_of_line (1, key); + rl_vi_insert_mode (1, key); + return (0); +} + +static void +_rl_vi_append_forward (int key) +{ + _rl_vi_advance_point (); +} + +int +rl_vi_append_mode (int count, int key) +{ + _rl_vi_append_forward (key); + rl_vi_start_inserting (key, 1, rl_arg_sign); + return (0); +} + +int +rl_vi_append_eol (int count, int key) +{ + rl_end_of_line (1, key); + rl_vi_append_mode (1, key); + return (0); +} + +/* What to do in the case of C-d. */ +int +rl_vi_eof_maybe (int count, int c) +{ + return (rl_newline (1, '\n')); +} + +/* Insertion mode stuff. */ + +/* Switching from one mode to the other really just involves + switching keymaps. */ +int +rl_vi_insertion_mode (int count, int key) +{ + _rl_keymap = vi_insertion_keymap; + _rl_vi_last_key_before_insert = key; + if (_rl_show_mode_in_prompt) + _rl_reset_prompt (); + return (0); +} + +int +rl_vi_insert_mode (int count, int key) +{ + rl_vi_start_inserting (key, 1, rl_arg_sign); + return (0); +} + +static void +vi_save_insert_buffer (int start, int len) +{ + /* Same code as _rl_vi_save_insert below */ + if (len >= vi_insert_buffer_size) + { + vi_insert_buffer_size += (len + 32) - (len % 32); + vi_insert_buffer = (char *)xrealloc (vi_insert_buffer, vi_insert_buffer_size); + } + strncpy (vi_insert_buffer, rl_line_buffer + start, len - 1); + vi_insert_buffer[len-1] = '\0'; +} + +static void +_rl_vi_save_replace (void) +{ + int len, start, end; + UNDO_LIST *up; + + up = rl_undo_list; + if (up == 0 || up->what != UNDO_END || vi_replace_count <= 0) + { + if (vi_insert_buffer_size >= 1) + vi_insert_buffer[0] = '\0'; + return; + } + /* Let's try it the quick and easy way for now. This should essentially + accommodate every UNDO_INSERT and save the inserted text to + vi_insert_buffer */ + end = rl_point; + start = end - vi_replace_count + 1; + len = vi_replace_count + 1; + + vi_save_insert_buffer (start, len); +} + +static void +_rl_vi_save_insert (UNDO_LIST *up) +{ + int len, start, end; + + if (up == 0 || up->what != UNDO_INSERT) + { + if (vi_insert_buffer_size >= 1) + vi_insert_buffer[0] = '\0'; + return; + } + + start = up->start; + end = up->end; + len = end - start + 1; + + vi_save_insert_buffer (start, len); +} + +void +_rl_vi_done_inserting (void) +{ + if (_rl_vi_doing_insert) + { + /* The `C', `s', and `S' commands set this. */ + rl_end_undo_group (); + /* Now, the text between rl_undo_list->next->start and + rl_undo_list->next->end is what was inserted while in insert + mode. It gets copied to VI_INSERT_BUFFER because it depends + on absolute indices into the line which may change (though they + probably will not). */ + _rl_vi_doing_insert = 0; + if (_rl_vi_last_key_before_insert == 'R') + _rl_vi_save_replace (); /* Half the battle */ + else + _rl_vi_save_insert (rl_undo_list->next); + vi_continued_command = 1; + } + else + { + if (rl_undo_list && (_rl_vi_last_key_before_insert == 'i' || + _rl_vi_last_key_before_insert == 'a' || + _rl_vi_last_key_before_insert == 'I' || + _rl_vi_last_key_before_insert == 'A')) + _rl_vi_save_insert (rl_undo_list); + /* XXX - Other keys probably need to be checked. */ + else if (_rl_vi_last_key_before_insert == 'C') + rl_end_undo_group (); + while (_rl_undo_group_level > 0) + rl_end_undo_group (); + vi_continued_command = 0; + } +} + +int +rl_vi_movement_mode (int count, int key) +{ + if (rl_point > 0) + rl_backward_char (1, key); + + _rl_keymap = vi_movement_keymap; + _rl_vi_done_inserting (); + + /* This is how POSIX.2 says `U' should behave -- everything up until the + first time you go into command mode should not be undone. */ + if (RL_ISSTATE (RL_STATE_VICMDONCE) == 0) + rl_free_undo_list (); + + if (_rl_show_mode_in_prompt) + _rl_reset_prompt (); + + RL_SETSTATE (RL_STATE_VICMDONCE); + return (0); +} + +int +rl_vi_arg_digit (int count, int c) +{ + if (c == '0' && rl_numeric_arg == 1 && !rl_explicit_arg) + return (rl_beg_of_line (1, c)); + else + return (rl_digit_argument (count, c)); +} + +/* Change the case of the next COUNT characters. */ +#if defined (HANDLE_MULTIBYTE) +static int +_rl_vi_change_mbchar_case (int count) +{ + wchar_t wc; + char mb[MB_LEN_MAX+1]; + int mlen, p; + size_t m; + mbstate_t ps; + + memset (&ps, 0, sizeof (mbstate_t)); + if (_rl_adjust_point (rl_line_buffer, rl_point, &ps) > 0) + count--; + while (count-- && rl_point < rl_end) + { + m = mbrtowc (&wc, rl_line_buffer + rl_point, rl_end - rl_point, &ps); + if (MB_INVALIDCH (m)) + wc = (wchar_t)rl_line_buffer[rl_point]; + else if (MB_NULLWCH (m)) + wc = L'\0'; + if (iswupper (wc)) + wc = towlower (wc); + else if (iswlower (wc)) + wc = towupper (wc); + else + { + /* Just skip over chars neither upper nor lower case */ + rl_forward_char (1, 0); + continue; + } + + /* Vi is kind of strange here. */ + if (wc) + { + p = rl_point; + mlen = wcrtomb (mb, wc, &ps); + if (mlen >= 0) + mb[mlen] = '\0'; + rl_begin_undo_group (); + rl_vi_delete (1, 0); + if (rl_point < p) /* Did we retreat at EOL? */ + _rl_vi_advance_point (); + rl_insert_text (mb); + rl_end_undo_group (); + rl_vi_check (); + } + else + rl_forward_char (1, 0); + } + + return 0; +} +#endif + +int +rl_vi_change_case (int count, int ignore) +{ + int c, p; + + /* Don't try this on an empty line. */ + if (rl_point >= rl_end) + return (0); + + c = 0; +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + return (_rl_vi_change_mbchar_case (count)); +#endif + + while (count-- && rl_point < rl_end) + { + if (_rl_uppercase_p (rl_line_buffer[rl_point])) + c = _rl_to_lower (rl_line_buffer[rl_point]); + else if (_rl_lowercase_p (rl_line_buffer[rl_point])) + c = _rl_to_upper (rl_line_buffer[rl_point]); + else + { + /* Just skip over characters neither upper nor lower case. */ + rl_forward_char (1, c); + continue; + } + + /* Vi is kind of strange here. */ + if (c) + { + p = rl_point; + rl_begin_undo_group (); + rl_vi_delete (1, c); + if (rl_point < p) /* Did we retreat at EOL? */ + rl_point++; + _rl_insert_char (1, c); + rl_end_undo_group (); + rl_vi_check (); + } + else + rl_forward_char (1, c); + } + return (0); +} + +int +rl_vi_put (int count, int key) +{ + if (!_rl_uppercase_p (key) && (rl_point + 1 <= rl_end)) + rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); + + while (count--) + rl_yank (1, key); + + rl_backward_char (1, key); + return (0); +} + +/* Move the cursor back one character if you're at the end of the line */ +int +rl_vi_check (void) +{ + if (rl_point && rl_point == rl_end) + _rl_vi_backup (); + return (0); +} + +/* Move to the character position specified by COUNT */ +int +rl_vi_column (int count, int key) +{ + if (count > rl_end) + rl_end_of_line (1, key); + else + { + rl_point = 0; + rl_point = _rl_forward_char_internal (count - 1); + } + return (0); +} + +/* Process C as part of the current numeric argument. Return -1 if the + argument should be aborted, 0 if we should not read any more chars, and + 1 if we should continue to read chars. */ +static int +_rl_vi_arg_dispatch (int c) +{ + int key; + + key = c; + if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument) + { + rl_numeric_arg *= 4; + return 1; + } + + c = UNMETA (c); + + if (_rl_digit_p (c)) + { + if (rl_explicit_arg) + rl_numeric_arg = (rl_numeric_arg * 10) + _rl_digit_value (c); + else + rl_numeric_arg = _rl_digit_value (c); + rl_explicit_arg = 1; + return 1; /* keep going */ + } + else + { + rl_clear_message (); + rl_stuff_char (key); + return 0; /* done */ + } +} + +/* A simplified loop for vi. Don't dispatch key at end. + Don't recognize minus sign? + Should this do rl_save_prompt/rl_restore_prompt? */ +static int +rl_digit_loop1 (void) +{ + int c, r; + + while (1) + { + if (_rl_arg_overflow ()) + return 1; + + c = _rl_arg_getchar (); + + r = _rl_vi_arg_dispatch (c); + if (r <= 0) + break; + } + + RL_UNSETSTATE(RL_STATE_NUMERICARG); + return (0); +} + +/* This set of functions is basically to handle the commands that take a + motion argument while in callback mode: read the command, read the motion + command modifier, find the extent of the text to affect, and dispatch the + command for execution. */ +static void +_rl_mvcxt_init (_rl_vimotion_cxt *m, int op, int key) +{ + m->op = op; + m->state = m->flags = 0; + m->ncxt = 0; + m->numeric_arg = -1; + m->start = rl_point; + m->end = rl_end; + m->key = key; + m->motion = -1; +} + +static _rl_vimotion_cxt * +_rl_mvcxt_alloc (int op, int key) +{ + _rl_vimotion_cxt *m; + + m = xmalloc (sizeof (_rl_vimotion_cxt)); + _rl_mvcxt_init (m, op, key); + return m; +} + +static void +_rl_mvcxt_dispose (_rl_vimotion_cxt *m) +{ + xfree (m); +} + +static int +rl_domove_motion_callback (_rl_vimotion_cxt *m) +{ + int c; + + _rl_vi_last_motion = c = m->motion; + + /* Append a blank character temporarily so that the motion routines + work right at the end of the line. Original value of rl_end is saved + as m->end. */ + rl_line_buffer[rl_end++] = ' '; + rl_line_buffer[rl_end] = '\0'; + + _rl_dispatch (c, _rl_keymap); + +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + /* Messy case where char search can be vi motion command; see rest of + details in callback.c. vi_char_search and callback_char_search just + set and unset the CHARSEARCH state. This is where any vi motion + command that needs to set its own state should be handled, with any + corresponding code to manage that state in callback.c */ + if (RL_ISSTATE (RL_STATE_CHARSEARCH)) + return 0; + else + return (_rl_vi_domove_motion_cleanup (c, m)); + } +#endif + + return (_rl_vi_domove_motion_cleanup (c, m)); +} + +int +_rl_vi_domove_motion_cleanup (int c, _rl_vimotion_cxt *m) +{ + int r; + + /* Remove the blank that we added in rl_domove_motion_callback. */ + rl_end = m->end; + rl_line_buffer[rl_end] = '\0'; + if (rl_point > rl_end) + rl_point = rl_end; + + /* No change in position means the command failed. */ + if (rl_mark == rl_point) + { + RL_UNSETSTATE (RL_STATE_VIMOTION); + return (-1); + } + + /* rl_vi_f[wW]ord () leaves the cursor on the first character of the next + word. If we are not at the end of the line, and we are on a + non-whitespace character, move back one (presumably to whitespace). */ + if ((_rl_to_upper (c) == 'W') && rl_point < rl_end && rl_point > rl_mark && + !whitespace (rl_line_buffer[rl_point])) + rl_point--; /* XXX */ + + /* If cw or cW, back up to the end of a word, so the behaviour of ce + or cE is the actual result. Brute-force, no subtlety. */ + if (m->key == 'c' && rl_point >= rl_mark && (_rl_to_upper (c) == 'W')) + { + /* Don't move farther back than where we started. */ + while (rl_point > rl_mark && whitespace (rl_line_buffer[rl_point])) + rl_point--; + + /* Posix.2 says that if cw or cW moves the cursor towards the end of + the line, the character under the cursor should be deleted. */ + if (rl_point == rl_mark) + _rl_vi_advance_point (); + else + { + /* Move past the end of the word so that the kill doesn't + remove the last letter of the previous word. Only do this + if we are not at the end of the line. */ + if (rl_point >= 0 && rl_point < (rl_end - 1) && !whitespace (rl_line_buffer[rl_point])) + _rl_vi_advance_point (); + } + } + + if (rl_mark < rl_point) + SWAP (rl_point, rl_mark); + +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + (*rl_redisplay_function)(); /* make sure motion is displayed */ +#endif + + r = vidomove_dispatch (m); + + return (r); +} + +#define RL_VIMOVENUMARG() (RL_ISSTATE (RL_STATE_VIMOTION) && RL_ISSTATE (RL_STATE_NUMERICARG)) + +static int +rl_domove_read_callback (_rl_vimotion_cxt *m) +{ + int c, save; + + c = m->motion; + + if (member (c, vi_motion)) + { +#if defined (READLINE_CALLBACKS) + /* If we just read a vi-mode motion command numeric argument, turn off + the `reading numeric arg' state */ + if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG()) + RL_UNSETSTATE (RL_STATE_NUMERICARG); +#endif + /* Should do everything, including turning off RL_STATE_VIMOTION */ + return (rl_domove_motion_callback (m)); + } + else if (m->key == c && (m->key == 'd' || m->key == 'y' || m->key == 'c')) + { + rl_mark = rl_end; + rl_beg_of_line (1, c); + _rl_vi_last_motion = c; + RL_UNSETSTATE (RL_STATE_VIMOTION); + return (vidomove_dispatch (m)); + } +#if defined (READLINE_CALLBACKS) + /* XXX - these need to handle rl_universal_argument bindings */ + /* Reading vi motion char continuing numeric argument */ + else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG()) + { + return (_rl_vi_arg_dispatch (c)); + } + /* Readine vi motion char starting numeric argument */ + else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_VIMOTION) && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)) + { + RL_SETSTATE (RL_STATE_NUMERICARG); + return (_rl_vi_arg_dispatch (c)); + } +#endif + else if (_rl_digit_p (c)) + { + /* This code path taken when not in callback mode */ + save = rl_numeric_arg; + rl_numeric_arg = _rl_digit_value (c); + rl_explicit_arg = 1; + RL_SETSTATE (RL_STATE_NUMERICARG); + rl_digit_loop1 (); + rl_numeric_arg *= save; + c = rl_vi_domove_getchar (m); + if (c < 0) + { + m->motion = 0; + return -1; + } + m->motion = c; + return (rl_domove_motion_callback (m)); + } + else + { + RL_UNSETSTATE (RL_STATE_VIMOTION); + RL_UNSETSTATE (RL_STATE_NUMERICARG); + return (1); + } +} + +static int +rl_vi_domove_getchar (_rl_vimotion_cxt *m) +{ + int c; + + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + return c; +} + +#if defined (READLINE_CALLBACKS) +int +_rl_vi_domove_callback (_rl_vimotion_cxt *m) +{ + int c, r; + + m->motion = c = rl_vi_domove_getchar (m); + if (c < 0) + return 1; /* EOF */ + r = rl_domove_read_callback (m); + + return ((r == 0) ? r : 1); /* normalize return values */ +} +#endif + +/* This code path is taken when not in callback mode. */ +int +rl_vi_domove (int x, int *ignore) +{ + int r; + _rl_vimotion_cxt *m; + + m = _rl_vimvcxt; + *ignore = m->motion = rl_vi_domove_getchar (m); + + if (m->motion < 0) + { + m->motion = 0; + return -1; + } + + return (rl_domove_read_callback (m)); +} + +static int +vi_delete_dispatch (_rl_vimotion_cxt *m) +{ + /* These are the motion commands that do not require adjusting the + mark. */ + if (((strchr (" l|h^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) && + (rl_mark < rl_end)) + INCREMENT_POS (rl_mark); + + rl_kill_text (rl_point, rl_mark); + return (0); +} + +int +rl_vi_delete_to (int count, int key) +{ + int c, r; + + _rl_vimvcxt = _rl_mvcxt_alloc (VIM_DELETE, key); + _rl_vimvcxt->start = rl_point; + + rl_mark = rl_point; + if (_rl_uppercase_p (key)) + { + _rl_vimvcxt->motion = '$'; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing && _rl_vi_last_motion != 'd') /* `dd' is special */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing) /* handle redoing `dd' here */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + rl_mark = rl_end; + rl_beg_of_line (1, key); + RL_UNSETSTATE (RL_STATE_VIMOTION); + r = vidomove_dispatch (_rl_vimvcxt); + } +#if defined (READLINE_CALLBACKS) + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + RL_SETSTATE (RL_STATE_VIMOTION); + return (0); + } +#endif + else + r = rl_vi_domove (key, &c); + + if (r < 0) + { + rl_ding (); + r = -1; + } + + _rl_mvcxt_dispose (_rl_vimvcxt); + _rl_vimvcxt = 0; + + return r; +} + +static int +vi_change_dispatch (_rl_vimotion_cxt *m) +{ + /* These are the motion commands that do not require adjusting the + mark. c[wW] are handled by special-case code in rl_vi_domove(), + and already leave the mark at the correct location. */ + if (((strchr (" l|hwW^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) && + (rl_mark < rl_end)) + INCREMENT_POS (rl_mark); + + /* The cursor never moves with c[wW]. */ + if ((_rl_to_upper (m->motion) == 'W') && rl_point < m->start) + rl_point = m->start; + + if (_rl_vi_redoing) + { + if (vi_insert_buffer && *vi_insert_buffer) + rl_begin_undo_group (); + rl_delete_text (rl_point, rl_mark); + if (vi_insert_buffer && *vi_insert_buffer) + { + rl_insert_text (vi_insert_buffer); + rl_end_undo_group (); + } + } + else + { + rl_begin_undo_group (); /* to make the `u' command work */ + rl_kill_text (rl_point, rl_mark); + /* `C' does not save the text inserted for undoing or redoing. */ + if (_rl_uppercase_p (m->key) == 0) + _rl_vi_doing_insert = 1; + /* XXX -- TODO -- use m->numericarg? */ + rl_vi_start_inserting (m->key, rl_numeric_arg, rl_arg_sign); + } + + return (0); +} + +int +rl_vi_change_to (int count, int key) +{ + int c, r; + + _rl_vimvcxt = _rl_mvcxt_alloc (VIM_CHANGE, key); + _rl_vimvcxt->start = rl_point; + + rl_mark = rl_point; + if (_rl_uppercase_p (key)) + { + _rl_vimvcxt->motion = '$'; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing && _rl_vi_last_motion != 'c') /* `cc' is special */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing) /* handle redoing `cc' here */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + rl_mark = rl_end; + rl_beg_of_line (1, key); + RL_UNSETSTATE (RL_STATE_VIMOTION); + r = vidomove_dispatch (_rl_vimvcxt); + } +#if defined (READLINE_CALLBACKS) + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + RL_SETSTATE (RL_STATE_VIMOTION); + return (0); + } +#endif + else + r = rl_vi_domove (key, &c); + + if (r < 0) + { + rl_ding (); + r = -1; /* normalize return value */ + } + + _rl_mvcxt_dispose (_rl_vimvcxt); + _rl_vimvcxt = 0; + + return r; +} + +static int +vi_yank_dispatch (_rl_vimotion_cxt *m) +{ + /* These are the motion commands that do not require adjusting the + mark. */ + if (((strchr (" l|h^0%bBFT`", m->motion) == 0) && (rl_point >= m->start)) && + (rl_mark < rl_end)) + INCREMENT_POS (rl_mark); + + rl_begin_undo_group (); + rl_kill_text (rl_point, rl_mark); + rl_end_undo_group (); + rl_do_undo (); + rl_point = m->start; + + return (0); +} + +int +rl_vi_yank_to (int count, int key) +{ + int c, r; + + _rl_vimvcxt = _rl_mvcxt_alloc (VIM_YANK, key); + _rl_vimvcxt->start = rl_point; + + rl_mark = rl_point; + if (_rl_uppercase_p (key)) + { + _rl_vimvcxt->motion = '$'; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing && _rl_vi_last_motion != 'y') /* `yy' is special */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + r = rl_domove_motion_callback (_rl_vimvcxt); + } + else if (_rl_vi_redoing) /* handle redoing `yy' here */ + { + _rl_vimvcxt->motion = _rl_vi_last_motion; + rl_mark = rl_end; + rl_beg_of_line (1, key); + RL_UNSETSTATE (RL_STATE_VIMOTION); + r = vidomove_dispatch (_rl_vimvcxt); + } +#if defined (READLINE_CALLBACKS) + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + RL_SETSTATE (RL_STATE_VIMOTION); + return (0); + } +#endif + else + r = rl_vi_domove (key, &c); + + if (r < 0) + { + rl_ding (); + r = -1; + } + + _rl_mvcxt_dispose (_rl_vimvcxt); + _rl_vimvcxt = 0; + + return r; +} + +static int +vidomove_dispatch (_rl_vimotion_cxt *m) +{ + int r; + + switch (m->op) + { + case VIM_DELETE: + r = vi_delete_dispatch (m); + break; + case VIM_CHANGE: + r = vi_change_dispatch (m); + break; + case VIM_YANK: + r = vi_yank_dispatch (m); + break; + default: + _rl_errmsg ("vidomove_dispatch: unknown operator %d", m->op); + r = 1; + break; + } + + RL_UNSETSTATE (RL_STATE_VIMOTION); + return r; +} + +int +rl_vi_rubout (int count, int key) +{ + int opoint; + + if (count < 0) + return (rl_vi_delete (-count, key)); + + if (rl_point == 0) + { + rl_ding (); + return 1; + } + + opoint = rl_point; + if (count > 1 && MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_backward_char (count, key); + else if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); + else + rl_point -= count; + + if (rl_point < 0) + rl_point = 0; + + rl_kill_text (rl_point, opoint); + + return (0); +} + +int +rl_vi_delete (int count, int key) +{ + int end; + + if (count < 0) + return (rl_vi_rubout (-count, key)); + + if (rl_end == 0) + { + rl_ding (); + return 1; + } + + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + end = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); + else + end = rl_point + count; + + if (end >= rl_end) + end = rl_end; + + rl_kill_text (rl_point, end); + + if (rl_point > 0 && rl_point == rl_end) + rl_backward_char (1, key); + + return (0); +} + +/* This does what Posix specifies vi-mode C-w to do: using whitespace and + punctuation characters as the word boundaries. */ + +#define vi_unix_word_boundary(c) (whitespace(c) || ispunct(c)) + +int +rl_vi_unix_word_rubout (int count, int key) +{ + int orig_point; + + if (rl_point == 0) + rl_ding (); + else + { + orig_point = rl_point; + if (count <= 0) + count = 1; + + while (count--) + { + /* This isn't quite what ksh93 does but it seems to match what the + Posix description of sh specifies, with a few accommodations + for sequences of whitespace characters between words and at + the end of the line. */ + + /* Skip over whitespace at the end of the line as a special case */ + if (rl_point > 0 && (rl_line_buffer[rl_point] == 0) && + whitespace (rl_line_buffer[rl_point - 1])) + while (--rl_point > 0 && whitespace (rl_line_buffer[rl_point])) + ; + + /* If we're at the start of a word, move back to word boundary so we + move back to the `preceding' word */ + if (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0) && + vi_unix_word_boundary (rl_line_buffer[rl_point - 1])) + rl_point--; + + /* If we are at a word boundary (whitespace/punct), move backward + past a sequence of word boundary characters. If we are at the + end of a word (non-word boundary), move back to a word boundary */ + if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point])) + while (rl_point && vi_unix_word_boundary (rl_line_buffer[rl_point - 1])) + rl_point--; + else if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0) + while (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point - 1]) == 0)) + _rl_vi_backup_point (); + } + + rl_kill_text (orig_point, rl_point); + } + + return 0; +} + + +int +rl_vi_back_to_indent (int count, int key) +{ + rl_beg_of_line (1, key); + while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) + rl_point++; + return (0); +} + +int +rl_vi_first_print (int count, int key) +{ + return (rl_vi_back_to_indent (1, key)); +} + +static int _rl_cs_dir, _rl_cs_orig_dir; + +#if defined (READLINE_CALLBACKS) +static int +_rl_vi_callback_char_search (_rl_callback_generic_arg *data) +{ + int c; +#if defined (HANDLE_MULTIBYTE) + c = _rl_vi_last_search_mblen = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX); +#else + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); +#endif + + if (c <= 0) + { + RL_UNSETSTATE (RL_STATE_CHARSEARCH); + return -1; + } + +#if !defined (HANDLE_MULTIBYTE) + _rl_vi_last_search_char = c; +#endif + + _rl_callback_func = 0; + _rl_want_redisplay = 1; + RL_UNSETSTATE (RL_STATE_CHARSEARCH); + +#if defined (HANDLE_MULTIBYTE) + return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_mbchar, _rl_vi_last_search_mblen)); +#else + return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_char)); +#endif +} +#endif + +int +rl_vi_char_search (int count, int key) +{ + int c; +#if defined (HANDLE_MULTIBYTE) + static char *target; + static int tlen; +#else + static char target; +#endif + + if (key == ';' || key == ',') + { + if (_rl_cs_orig_dir == 0) + return 1; +#if defined (HANDLE_MULTIBYTE) + if (_rl_vi_last_search_mblen == 0) + return 1; +#else + if (_rl_vi_last_search_char == 0) + return 1; +#endif + _rl_cs_dir = (key == ';') ? _rl_cs_orig_dir : -_rl_cs_orig_dir; + } + else + { + switch (key) + { + case 't': + _rl_cs_orig_dir = _rl_cs_dir = FTO; + break; + + case 'T': + _rl_cs_orig_dir = _rl_cs_dir = BTO; + break; + + case 'f': + _rl_cs_orig_dir = _rl_cs_dir = FFIND; + break; + + case 'F': + _rl_cs_orig_dir = _rl_cs_dir = BFIND; + break; + } + + if (_rl_vi_redoing) + { + /* set target and tlen below */ + } +#if defined (READLINE_CALLBACKS) + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = _rl_callback_data_alloc (count); + _rl_callback_data->i1 = _rl_cs_dir; + _rl_callback_data->i2 = key; + _rl_callback_func = _rl_vi_callback_char_search; + RL_SETSTATE (RL_STATE_CHARSEARCH); + return (0); + } +#endif + else + { +#if defined (HANDLE_MULTIBYTE) + c = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX); + if (c <= 0) + return -1; + _rl_vi_last_search_mblen = c; +#else + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + if (c < 0) + return -1; + _rl_vi_last_search_char = c; +#endif + } + } + +#if defined (HANDLE_MULTIBYTE) + target = _rl_vi_last_search_mbchar; + tlen = _rl_vi_last_search_mblen; +#else + target = _rl_vi_last_search_char; +#endif + +#if defined (HANDLE_MULTIBYTE) + return (_rl_char_search_internal (count, _rl_cs_dir, target, tlen)); +#else + return (_rl_char_search_internal (count, _rl_cs_dir, target)); +#endif +} + +/* Match brackets */ +int +rl_vi_match (int ignore, int key) +{ + int count = 1, brack, pos, tmp, pre; + + pos = rl_point; + if ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0) + { + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + { + while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0) + { + pre = rl_point; + rl_forward_char (1, key); + if (pre == rl_point) + break; + } + } + else + while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0 && + rl_point < rl_end - 1) + rl_forward_char (1, key); + + if (brack <= 0) + { + rl_point = pos; + rl_ding (); + return 1; + } + } + + pos = rl_point; + + if (brack < 0) + { + while (count) + { + tmp = pos; + if (MB_CUR_MAX == 1 || rl_byte_oriented) + pos--; + else + { + pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY); + if (tmp == pos) + pos--; + } + if (pos >= 0) + { + int b = rl_vi_bracktype (rl_line_buffer[pos]); + if (b == -brack) + count--; + else if (b == brack) + count++; + } + else + { + rl_ding (); + return 1; + } + } + } + else + { /* brack > 0 */ + while (count) + { + if (MB_CUR_MAX == 1 || rl_byte_oriented) + pos++; + else + pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY); + + if (pos < rl_end) + { + int b = rl_vi_bracktype (rl_line_buffer[pos]); + if (b == -brack) + count--; + else if (b == brack) + count++; + } + else + { + rl_ding (); + return 1; + } + } + } + rl_point = pos; + return (0); +} + +int +rl_vi_bracktype (int c) +{ + switch (c) + { + case '(': return 1; + case ')': return -1; + case '[': return 2; + case ']': return -2; + case '{': return 3; + case '}': return -3; + default: return 0; + } +} + +static int +_rl_vi_change_char (int count, int c, char *mb) +{ + int p; + + if (c == '\033' || c == CTRL ('C')) + return -1; + + rl_begin_undo_group (); + while (count-- && rl_point < rl_end) + { + p = rl_point; + rl_vi_delete (1, c); + if (rl_point < p) /* Did we retreat at EOL? */ + _rl_vi_append_forward (c); +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + rl_insert_text (mb); + else +#endif + _rl_insert_char (1, c); + } + + /* The cursor shall be left on the last character changed. */ + rl_backward_char (1, c); + + rl_end_undo_group (); + + return (0); +} + +static int +_rl_vi_callback_getchar (char *mb, int mlen) +{ + int c; + + RL_SETSTATE(RL_STATE_MOREINPUT); + c = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (c < 0) + return -1; + +#if defined (HANDLE_MULTIBYTE) + if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) + c = _rl_read_mbstring (c, mb, mlen); +#endif + + return c; +} + +#if defined (READLINE_CALLBACKS) +static int +_rl_vi_callback_change_char (_rl_callback_generic_arg *data) +{ + int c; + char mb[MB_LEN_MAX+1]; + + c = _rl_vi_callback_getchar (mb, MB_LEN_MAX); +#if defined (HANDLE_MULTIBYTE) + strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX); +#else + _rl_vi_last_replacement[0] = c; +#endif + _rl_vi_last_replacement[MB_LEN_MAX] = '\0'; /* XXX */ + + if (c < 0) + return -1; + + _rl_callback_func = 0; + _rl_want_redisplay = 1; + + return (_rl_vi_change_char (data->count, c, mb)); +} +#endif + +int +rl_vi_change_char (int count, int key) +{ + int c; + char mb[MB_LEN_MAX+1]; + + if (_rl_vi_redoing) + { + strncpy (mb, _rl_vi_last_replacement, MB_LEN_MAX); + c = (unsigned char)_rl_vi_last_replacement[0]; /* XXX */ + mb[MB_LEN_MAX] = '\0'; + } +#if defined (READLINE_CALLBACKS) + else if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = _rl_callback_data_alloc (count); + _rl_callback_func = _rl_vi_callback_change_char; + return (0); + } +#endif + else + { + c = _rl_vi_callback_getchar (mb, MB_LEN_MAX); +#ifdef HANDLE_MULTIBYTE + strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX); +#else + _rl_vi_last_replacement[0] = c; +#endif + _rl_vi_last_replacement[MB_LEN_MAX] = '\0'; /* just in case */ + } + + if (c < 0) + return -1; + + return (_rl_vi_change_char (count, c, mb)); +} + +int +rl_vi_subst (int count, int key) +{ + /* If we are redoing, rl_vi_change_to will stuff the last motion char */ + if (_rl_vi_redoing == 0) + rl_stuff_char ((key == 'S') ? 'c' : 'l'); /* `S' == `cc', `s' == `cl' */ + + return (rl_vi_change_to (count, 'c')); +} + +int +rl_vi_overstrike (int count, int key) +{ + if (_rl_vi_doing_insert == 0) + { + _rl_vi_doing_insert = 1; + rl_begin_undo_group (); + } + + if (count > 0) + { + _rl_overwrite_char (count, key); + vi_replace_count += count; + } + + return (0); +} + +int +rl_vi_overstrike_delete (int count, int key) +{ + int i, s; + + for (i = 0; i < count; i++) + { + if (vi_replace_count == 0) + { + rl_ding (); + break; + } + s = rl_point; + + if (rl_do_undo ()) + vi_replace_count--; + + if (rl_point == s) + rl_backward_char (1, key); + } + + if (vi_replace_count == 0 && _rl_vi_doing_insert) + { + rl_end_undo_group (); + rl_do_undo (); + _rl_vi_doing_insert = 0; + } + return (0); +} + +int +rl_vi_replace (int count, int key) +{ + int i; + + vi_replace_count = 0; + + if (vi_replace_map == 0) + { + vi_replace_map = rl_make_bare_keymap (); + + for (i = 0; i < ' '; i++) + if (vi_insertion_keymap[i].type == ISFUNC) + vi_replace_map[i].function = vi_insertion_keymap[i].function; + + for (i = ' '; i < KEYMAP_SIZE; i++) + vi_replace_map[i].function = rl_vi_overstrike; + + vi_replace_map[RUBOUT].function = rl_vi_overstrike_delete; + + /* Make sure these are what we want. */ + vi_replace_map[ESC].function = rl_vi_movement_mode; + vi_replace_map[RETURN].function = rl_newline; + vi_replace_map[NEWLINE].function = rl_newline; + + /* If the normal vi insertion keymap has ^H bound to erase, do the + same here. Probably should remove the assignment to RUBOUT up + there, but I don't think it will make a difference in real life. */ + if (vi_insertion_keymap[CTRL ('H')].type == ISFUNC && + vi_insertion_keymap[CTRL ('H')].function == rl_rubout) + vi_replace_map[CTRL ('H')].function = rl_vi_overstrike_delete; + + /* Make sure this is the value we need. */ + vi_replace_map[ANYOTHERKEY].type = ISFUNC; + vi_replace_map[ANYOTHERKEY].function = (rl_command_func_t *)NULL; + } + + rl_vi_start_inserting (key, 1, rl_arg_sign); + + _rl_vi_last_key_before_insert = key; + _rl_keymap = vi_replace_map; + + return (0); +} + +#if 0 +/* Try to complete the word we are standing on or the word that ends with + the previous character. A space matches everything. Word delimiters are + space and ;. */ +int +rl_vi_possible_completions (void) +{ + int save_pos = rl_point; + + if (rl_line_buffer[rl_point] != ' ' && rl_line_buffer[rl_point] != ';') + { + while (rl_point < rl_end && rl_line_buffer[rl_point] != ' ' && + rl_line_buffer[rl_point] != ';') + _rl_vi_advance_point (); + } + else if (rl_line_buffer[rl_point - 1] == ';') + { + rl_ding (); + return (0); + } + + rl_possible_completions (); + rl_point = save_pos; + + return (0); +} +#endif + +/* Functions to save and restore marks. */ +static int +_rl_vi_set_mark (void) +{ + int ch; + + RL_SETSTATE(RL_STATE_MOREINPUT); + ch = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (ch < 0 || ch < 'a' || ch > 'z') /* make test against 0 explicit */ + { + rl_ding (); + return 1; + } + ch -= 'a'; + vi_mark_chars[ch] = rl_point; + return 0; +} + +#if defined (READLINE_CALLBACKS) +static int +_rl_vi_callback_set_mark (_rl_callback_generic_arg *data) +{ + _rl_callback_func = 0; + _rl_want_redisplay = 1; + + return (_rl_vi_set_mark ()); +} +#endif + +int +rl_vi_set_mark (int count, int key) +{ +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = 0; + _rl_callback_func = _rl_vi_callback_set_mark; + return (0); + } +#endif + + return (_rl_vi_set_mark ()); +} + +static int +_rl_vi_goto_mark (void) +{ + int ch; + + RL_SETSTATE(RL_STATE_MOREINPUT); + ch = rl_read_key (); + RL_UNSETSTATE(RL_STATE_MOREINPUT); + + if (ch == '`') + { + rl_point = rl_mark; + return 0; + } + else if (ch < 0 || ch < 'a' || ch > 'z') /* make test against 0 explicit */ + { + rl_ding (); + return 1; + } + + ch -= 'a'; + if (vi_mark_chars[ch] == -1) + { + rl_ding (); + return 1; + } + rl_point = vi_mark_chars[ch]; + return 0; +} + +#if defined (READLINE_CALLBACKS) +static int +_rl_vi_callback_goto_mark (_rl_callback_generic_arg *data) +{ + _rl_callback_func = 0; + _rl_want_redisplay = 1; + + return (_rl_vi_goto_mark ()); +} +#endif + +int +rl_vi_goto_mark (int count, int key) +{ +#if defined (READLINE_CALLBACKS) + if (RL_ISSTATE (RL_STATE_CALLBACK)) + { + _rl_callback_data = 0; + _rl_callback_func = _rl_vi_callback_goto_mark; + return (0); + } +#endif + + return (_rl_vi_goto_mark ()); +} +#endif /* VI_MODE */ diff --git a/readline/readline/xfree.c b/readline/readline/xfree.c new file mode 100644 index 0000000000..c199b29bdf --- /dev/null +++ b/readline/readline/xfree.c @@ -0,0 +1,49 @@ +/* xfree.c -- safe version of free that ignores attempts to free NUL */ + +/* Copyright (C) 1991-2010,2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +#include +#endif + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "xmalloc.h" + +/* **************************************************************** */ +/* */ +/* Memory Deallocation. */ +/* */ +/* **************************************************************** */ + +/* Use this as the function to call when adding unwind protects so we + don't need to know what free() returns. */ +void +xfree (PTR_T string) +{ + if (string) + free (string); +} diff --git a/readline/readline/xmalloc.c b/readline/readline/xmalloc.c new file mode 100644 index 0000000000..5d01d75eae --- /dev/null +++ b/readline/readline/xmalloc.c @@ -0,0 +1,75 @@ +/* xmalloc.c -- safe versions of malloc and realloc */ + +/* Copyright (C) 1991-2017 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#define READLINE_LIBRARY + +#if defined (HAVE_CONFIG_H) +#include +#endif + +#include + +#if defined (HAVE_STDLIB_H) +# include +#else +# include "ansi_stdlib.h" +#endif /* HAVE_STDLIB_H */ + +#include "xmalloc.h" + +/* **************************************************************** */ +/* */ +/* Memory Allocation and Deallocation. */ +/* */ +/* **************************************************************** */ + +static void +memory_error_and_abort (char *fname) +{ + fprintf (stderr, "%s: out of virtual memory\n", fname); + exit (2); +} + +/* Return a pointer to free()able block of memory large enough + to hold BYTES number of bytes. If the memory cannot be allocated, + print an error message and abort. */ +PTR_T +xmalloc (size_t bytes) +{ + PTR_T temp; + + temp = malloc (bytes); + if (temp == 0) + memory_error_and_abort ("xmalloc"); + return (temp); +} + +PTR_T +xrealloc (PTR_T pointer, size_t bytes) +{ + PTR_T temp; + + temp = pointer ? realloc (pointer, bytes) : malloc (bytes); + + if (temp == 0) + memory_error_and_abort ("xrealloc"); + return (temp); +} diff --git a/readline/readline/xmalloc.h b/readline/readline/xmalloc.h new file mode 100644 index 0000000000..f40d7a596a --- /dev/null +++ b/readline/readline/xmalloc.h @@ -0,0 +1,45 @@ +/* xmalloc.h -- memory allocation that aborts on errors. */ + +/* Copyright (C) 1999-2009 Free Software Foundation, Inc. + + This file is part of the GNU Readline Library (Readline), a library + for reading lines of text with interactive input and history editing. + + Readline is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + Readline is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with Readline. If not, see . +*/ + +#if !defined (_XMALLOC_H_) +#define _XMALLOC_H_ + +#if defined (READLINE_LIBRARY) +# include "rlstdc.h" +#else +# include +#endif + +#ifndef PTR_T + +#ifdef __STDC__ +# define PTR_T void * +#else +# define PTR_T char * +#endif + +#endif /* !PTR_T */ + +extern PTR_T xmalloc PARAMS((size_t)); +extern PTR_T xrealloc PARAMS((void *, size_t)); +extern void xfree PARAMS((void *)); + +#endif /* _XMALLOC_H_ */ diff --git a/readline/rlconf.h b/readline/rlconf.h deleted file mode 100644 index b6d6a2f128..0000000000 --- a/readline/rlconf.h +++ /dev/null @@ -1,79 +0,0 @@ -/* rlconf.h -- readline configuration definitions */ - -/* Copyright (C) 1992-2015 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RLCONF_H_) -#define _RLCONF_H_ - -/* Define this if you want the vi-mode editing available. */ -#define VI_MODE - -/* Define this to get an indication of file type when listing completions. */ -#define VISIBLE_STATS - -/* Define this to get support for colors when listing completions and in - other places. */ -#define COLOR_SUPPORT - -/* This definition is needed by readline.c, rltty.c, and signals.c. */ -/* If on, then readline handles signals in a way that doesn't suck. */ -#define HANDLE_SIGNALS - -/* Ugly but working hack for binding prefix meta. */ -#define PREFIX_META_HACK - -/* The next-to-last-ditch effort file name for a user-specific init file. */ -#define DEFAULT_INPUTRC "~/.inputrc" - -/* The ultimate last-ditch filename for an init file -- system-wide. */ -#define SYS_INPUTRC "/etc/inputrc" - -/* If defined, expand tabs to spaces. */ -#define DISPLAY_TABS - -/* If defined, use the terminal escape sequence to move the cursor forward - over a character when updating the line rather than rewriting it. */ -/* #define HACK_TERMCAP_MOTION */ - -/* The string inserted by the `insert comment' command. */ -#define RL_COMMENT_BEGIN_DEFAULT "#" - -/* Define this if you want code that allows readline to be used in an - X `callback' style. */ -#define READLINE_CALLBACKS - -/* Define this if you want the cursor to indicate insert or overwrite mode. */ -/* #define CURSOR_MODE */ - -/* Define this if you want to enable code that talks to the Linux kernel - tty auditing system. */ -/* #define ENABLE_TTY_AUDIT_SUPPORT */ - -/* Defaults for the various editing mode indicators, inserted at the beginning - of the last (maybe only) line of the prompt if show-mode-in-prompt is on */ -#define RL_EMACS_MODESTR_DEFAULT "@" -#define RL_EMACS_MODESTR_DEFLEN 1 - -#define RL_VI_INS_MODESTR_DEFAULT "(ins)" -#define RL_VI_INS_MODESTR_DEFLEN 5 -#define RL_VI_CMD_MODESTR_DEFAULT "(cmd)" -#define RL_VI_CMD_MODESTR_DEFLEN 5 - -#endif /* _RLCONF_H_ */ diff --git a/readline/rldefs.h b/readline/rldefs.h deleted file mode 100644 index dab1beba1d..0000000000 --- a/readline/rldefs.h +++ /dev/null @@ -1,166 +0,0 @@ -/* rldefs.h -- an attempt to isolate some of the system-specific defines - for readline. This should be included after any files that define - system-specific constants like _POSIX_VERSION or USG. */ - -/* Copyright (C) 1987-2011 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RLDEFS_H_) -#define _RLDEFS_H_ - -#if defined (HAVE_CONFIG_H) -# include "config.h" -#endif - -#include "rlstdc.h" - -#if defined (STRCOLL_BROKEN) -# undef HAVE_STRCOLL -#endif - -#if defined (_POSIX_VERSION) && !defined (TERMIOS_MISSING) -# define TERMIOS_TTY_DRIVER -#else -# if defined (HAVE_TERMIO_H) -# define TERMIO_TTY_DRIVER -# else -# if !defined (__MINGW32__) -# define NEW_TTY_DRIVER -# else -# define NO_TTY_DRIVER -# endif -# endif -#endif - -/* Posix macro to check file in statbuf for directory-ness. - This requires that be included before this test. */ -#if defined (S_IFDIR) && !defined (S_ISDIR) -# define S_ISDIR(m) (((m)&S_IFMT) == S_IFDIR) -#endif - -/* Decide which flavor of the header file describing the C library - string functions to include and include it. */ - -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -#if !defined (strchr) && !defined (__STDC__) -extern char *strchr (), *strrchr (); -#endif /* !strchr && !__STDC__ */ - -#if defined (PREFER_STDARG) -# include -#else -# if defined (PREFER_VARARGS) -# include -# endif -#endif - -#if defined (HAVE_STRCASECMP) -#define _rl_stricmp strcasecmp -#define _rl_strnicmp strncasecmp -#else -extern int _rl_stricmp PARAMS((const char *, const char *)); -extern int _rl_strnicmp PARAMS((const char *, const char *, int)); -#endif - -#if defined (HAVE_STRPBRK) && !defined (HAVE_MULTIBYTE) -# define _rl_strpbrk(a,b) strpbrk((a),(b)) -#else -extern char *_rl_strpbrk PARAMS((const char *, const char *)); -#endif - -#if !defined (emacs_mode) -# define no_mode -1 -# define vi_mode 0 -# define emacs_mode 1 -#endif - -#if !defined (RL_IM_INSERT) -# define RL_IM_INSERT 1 -# define RL_IM_OVERWRITE 0 -# -# define RL_IM_DEFAULT RL_IM_INSERT -#endif - -/* If you cast map[key].function to type (Keymap) on a Cray, - the compiler takes the value of map[key].function and - divides it by 4 to convert between pointer types (pointers - to functions and pointers to structs are different sizes). - This is not what is wanted. */ -#if defined (CRAY) -# define FUNCTION_TO_KEYMAP(map, key) (Keymap)((int)map[key].function) -# define KEYMAP_TO_FUNCTION(data) (rl_command_func_t *)((int)(data)) -#else -# define FUNCTION_TO_KEYMAP(map, key) (Keymap)(map[key].function) -# define KEYMAP_TO_FUNCTION(data) (rl_command_func_t *)(data) -#endif - -#ifndef savestring -#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x)) -#endif - -/* Possible values for _rl_bell_preference. */ -#define NO_BELL 0 -#define AUDIBLE_BELL 1 -#define VISIBLE_BELL 2 - -/* Definitions used when searching the line for characters. */ -/* NOTE: it is necessary that opposite directions are inverses */ -#define FTO 1 /* forward to */ -#define BTO -1 /* backward to */ -#define FFIND 2 /* forward find */ -#define BFIND -2 /* backward find */ - -/* Possible values for the found_quote flags word used by the completion - functions. It says what kind of (shell-like) quoting we found anywhere - in the line. */ -#define RL_QF_SINGLE_QUOTE 0x01 -#define RL_QF_DOUBLE_QUOTE 0x02 -#define RL_QF_BACKSLASH 0x04 -#define RL_QF_OTHER_QUOTE 0x08 - -/* Default readline line buffer length. */ -#define DEFAULT_BUFFER_SIZE 256 - -#if !defined (STREQ) -#define STREQ(a, b) (((a)[0] == (b)[0]) && (strcmp ((a), (b)) == 0)) -#define STREQN(a, b, n) (((n) == 0) ? (1) \ - : ((a)[0] == (b)[0]) && (strncmp ((a), (b), (n)) == 0)) -#endif - -#if !defined (RL_STRLEN) -# define RL_STRLEN(s) (((s) && (s)[0]) ? ((s)[1] ? ((s)[2] ? strlen(s) : 2) : 1) : 0) -#endif - -#if !defined (FREE) -# define FREE(x) if (x) free (x) -#endif - -#if !defined (SWAP) -# define SWAP(s, e) do { int t; t = s; s = e; e = t; } while (0) -#endif - -/* CONFIGURATION SECTION */ -#include "rlconf.h" - -#endif /* !_RLDEFS_H_ */ diff --git a/readline/rlmbutil.h b/readline/rlmbutil.h deleted file mode 100644 index 6fd03f6a0c..0000000000 --- a/readline/rlmbutil.h +++ /dev/null @@ -1,213 +0,0 @@ -/* rlmbutil.h -- utility functions for multibyte characters. */ - -/* Copyright (C) 2001-2015 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RL_MBUTIL_H_) -#define _RL_MBUTIL_H_ - -#include "rlstdc.h" - -/************************************************/ -/* check multibyte capability for I18N code */ -/************************************************/ - -/* For platforms which support the ISO C amendement 1 functionality we - support user defined character classes. */ - /* Solaris 2.5 has a bug: must be included before . */ -#if defined (HAVE_WCTYPE_H) && defined (HAVE_WCHAR_H) && defined (HAVE_LOCALE_H) -# include -# include -# if defined (HAVE_ISWCTYPE) && \ - defined (HAVE_ISWLOWER) && \ - defined (HAVE_ISWUPPER) && \ - defined (HAVE_MBSRTOWCS) && \ - defined (HAVE_MBRTOWC) && \ - defined (HAVE_MBRLEN) && \ - defined (HAVE_TOWLOWER) && \ - defined (HAVE_TOWUPPER) && \ - defined (HAVE_WCHAR_T) && \ - defined (HAVE_WCWIDTH) - /* system is supposed to support XPG5 */ -# define HANDLE_MULTIBYTE 1 -# endif -#endif - -/* If we don't want multibyte chars even on a system that supports them, let - the configuring user turn multibyte support off. */ -#if defined (NO_MULTIBYTE_SUPPORT) -# undef HANDLE_MULTIBYTE -#endif - -/* Some systems, like BeOS, have multibyte encodings but lack mbstate_t. */ -#if HANDLE_MULTIBYTE && !defined (HAVE_MBSTATE_T) -# define wcsrtombs(dest, src, len, ps) (wcsrtombs) (dest, src, len, 0) -# define mbsrtowcs(dest, src, len, ps) (mbsrtowcs) (dest, src, len, 0) -# define wcrtomb(s, wc, ps) (wcrtomb) (s, wc, 0) -# define mbrtowc(pwc, s, n, ps) (mbrtowc) (pwc, s, n, 0) -# define mbrlen(s, n, ps) (mbrlen) (s, n, 0) -# define mbstate_t int -#endif - -/* Make sure MB_LEN_MAX is at least 16 on systems that claim to be able to - handle multibyte chars (some systems define MB_LEN_MAX as 1) */ -#ifdef HANDLE_MULTIBYTE -# include -# if defined(MB_LEN_MAX) && (MB_LEN_MAX < 16) -# undef MB_LEN_MAX -# endif -# if !defined (MB_LEN_MAX) -# define MB_LEN_MAX 16 -# endif -#endif - -/************************************************/ -/* end of multibyte capability checks for I18N */ -/************************************************/ - -/* - * Flags for _rl_find_prev_mbchar and _rl_find_next_mbchar: - * - * MB_FIND_ANY find any multibyte character - * MB_FIND_NONZERO find a non-zero-width multibyte character - */ - -#define MB_FIND_ANY 0x00 -#define MB_FIND_NONZERO 0x01 - -extern int _rl_find_prev_mbchar PARAMS((char *, int, int)); -extern int _rl_find_next_mbchar PARAMS((char *, int, int, int)); - -#ifdef HANDLE_MULTIBYTE - -extern int _rl_compare_chars PARAMS((char *, int, mbstate_t *, char *, int, mbstate_t *)); -extern int _rl_get_char_len PARAMS((char *, mbstate_t *)); -extern int _rl_adjust_point PARAMS((char *, int, mbstate_t *)); - -extern int _rl_read_mbchar PARAMS((char *, int)); -extern int _rl_read_mbstring PARAMS((int, char *, int)); - -extern int _rl_is_mbchar_matched PARAMS((char *, int, int, char *, int)); - -extern wchar_t _rl_char_value PARAMS((char *, int)); -extern int _rl_walphabetic PARAMS((wchar_t)); - -#define _rl_to_wupper(wc) (iswlower (wc) ? towupper (wc) : (wc)) -#define _rl_to_wlower(wc) (iswupper (wc) ? towlower (wc) : (wc)) - -#define MB_NEXTCHAR(b,s,c,f) \ - ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \ - ? _rl_find_next_mbchar ((b), (s), (c), (f)) \ - : ((s) + (c))) -#define MB_PREVCHAR(b,s,f) \ - ((MB_CUR_MAX > 1 && rl_byte_oriented == 0) \ - ? _rl_find_prev_mbchar ((b), (s), (f)) \ - : ((s) - 1)) - -#define MB_INVALIDCH(x) ((x) == (size_t)-1 || (x) == (size_t)-2) -#define MB_NULLWCH(x) ((x) == 0) - -/* Try and shortcut the printable ascii characters to cut down the number of - calls to a libc wcwidth() */ -static inline int -_rl_wcwidth (wc) - wchar_t wc; -{ - switch (wc) - { - case ' ': case '!': case '"': case '#': case '%': - case '&': case '\'': case '(': case ')': case '*': - case '+': case ',': case '-': case '.': case '/': - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - case ':': case ';': case '<': case '=': case '>': - case '?': - case 'A': case 'B': case 'C': case 'D': case 'E': - case 'F': case 'G': case 'H': case 'I': case 'J': - case 'K': case 'L': case 'M': case 'N': case 'O': - case 'P': case 'Q': case 'R': case 'S': case 'T': - case 'U': case 'V': case 'W': case 'X': case 'Y': - case 'Z': - case '[': case '\\': case ']': case '^': case '_': - case 'a': case 'b': case 'c': case 'd': case 'e': - case 'f': case 'g': case 'h': case 'i': case 'j': - case 'k': case 'l': case 'm': case 'n': case 'o': - case 'p': case 'q': case 'r': case 's': case 't': - case 'u': case 'v': case 'w': case 'x': case 'y': - case 'z': case '{': case '|': case '}': case '~': - return 1; - default: - return wcwidth (wc); - } -} - -/* Unicode combining characters range from U+0300 to U+036F */ -#define UNICODE_COMBINING_CHAR(x) ((x) >= 768 && (x) <= 879) - -#if defined (WCWIDTH_BROKEN) -# define WCWIDTH(wc) ((_rl_utf8locale && UNICODE_COMBINING_CHAR(wc)) ? 0 : _rl_wcwidth(wc)) -#else -# define WCWIDTH(wc) _rl_wcwidth(wc) -#endif - -#if defined (WCWIDTH_BROKEN) -# define IS_COMBINING_CHAR(x) (WCWIDTH(x) == 0 && iswcntrl(x) == 0) -#else -# define IS_COMBINING_CHAR(x) (WCWIDTH(x) == 0) -#endif - -#define UTF8_SINGLEBYTE(c) (((c) & 0x80) == 0) -#define UTF8_MBFIRSTCHAR(c) (((c) & 0xc0) == 0xc0) -#define UTF8_MBCHAR(c) (((c) & 0xc0) == 0x80) - -#else /* !HANDLE_MULTIBYTE */ - -#undef MB_LEN_MAX -#undef MB_CUR_MAX - -#define MB_LEN_MAX 1 -#define MB_CUR_MAX 1 - -#define _rl_find_prev_mbchar(b, i, f) (((i) == 0) ? (i) : ((i) - 1)) -#define _rl_find_next_mbchar(b, i1, i2, f) ((i1) + (i2)) - -#define _rl_char_value(buf,ind) ((buf)[(ind)]) - -#define _rl_walphabetic(c) (rl_alphabetic (c)) - -#define _rl_to_wupper(c) (_rl_to_upper (c)) -#define _rl_to_wlower(c) (_rl_to_lower (c)) - -#define MB_NEXTCHAR(b,s,c,f) ((s) + (c)) -#define MB_PREVCHAR(b,s,f) ((s) - 1) - -#define MB_INVALIDCH(x) (0) -#define MB_NULLWCH(x) (0) - -#define UTF8_SINGLEBYTE(c) (1) - -#if !defined (HAVE_WCHAR_T) && !defined (wchar_t) -# define wchar_t int -#endif - -#endif /* !HANDLE_MULTIBYTE */ - -extern int rl_byte_oriented; - -#endif /* _RL_MBUTIL_H_ */ diff --git a/readline/rlprivate.h b/readline/rlprivate.h deleted file mode 100644 index e85e4d8124..0000000000 --- a/readline/rlprivate.h +++ /dev/null @@ -1,573 +0,0 @@ -/* rlprivate.h -- functions and variables global to the readline library, - but not intended for use by applications. */ - -/* Copyright (C) 1999-2015 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RL_PRIVATE_H_) -#define _RL_PRIVATE_H_ - -#include "rlconf.h" /* for VISIBLE_STATS */ -#include "rlstdc.h" -#include "posixjmp.h" /* defines procenv_t */ -#include "rlmbutil.h" /* for HANDLE_MULTIBYTE */ - -/************************************************************************* - * * - * Convenience definitions * - * * - *************************************************************************/ - -#define EMACS_MODE() (rl_editing_mode == emacs_mode) -#define VI_COMMAND_MODE() (rl_editing_mode == vi_mode && _rl_keymap == vi_movement_keymap) -#define VI_INSERT_MODE() (rl_editing_mode == vi_mode && _rl_keymap == vi_insertion_keymap) - -#define RL_CHECK_SIGNALS() \ - do { \ - if (_rl_caught_signal) _rl_signal_handler (_rl_caught_signal); \ - } while (0) - -#define RL_SIG_RECEIVED() (_rl_caught_signal != 0) -#define RL_SIGINT_RECEIVED() (_rl_caught_signal == SIGINT) -#define RL_SIGWINCH_RECEIVED() (_rl_caught_signal == SIGWINCH) - -#define CUSTOM_REDISPLAY_FUNC() (rl_redisplay_function != rl_redisplay) -#define CUSTOM_INPUT_FUNC() (rl_getc_function != rl_getc) - -/************************************************************************* - * * - * Global structs undocumented in texinfo manual and not in readline.h * - * * - *************************************************************************/ -/* search types */ -#define RL_SEARCH_ISEARCH 0x01 /* incremental search */ -#define RL_SEARCH_NSEARCH 0x02 /* non-incremental search */ -#define RL_SEARCH_CSEARCH 0x04 /* intra-line char search */ - -/* search flags */ -#define SF_REVERSE 0x01 -#define SF_FOUND 0x02 -#define SF_FAILED 0x04 -#define SF_CHGKMAP 0x08 -#define SF_PATTERN 0x10 /* unused so far */ - -typedef struct __rl_search_context -{ - int type; - int sflags; - - char *search_string; - int search_string_index; - int search_string_size; - - char **lines; - char *allocated_line; - int hlen; - int hindex; - - int save_point; - int save_mark; - int save_line; - int last_found_line; - char *prev_line_found; - - UNDO_LIST *save_undo_list; - - Keymap keymap; /* used when dispatching commands in search string */ - Keymap okeymap; /* original keymap */ - - int history_pos; - int direction; - - int prevc; - int lastc; -#if defined (HANDLE_MULTIBYTE) - char mb[MB_LEN_MAX]; - char pmb[MB_LEN_MAX]; -#endif - - char *sline; - int sline_len; - int sline_index; - - char *search_terminators; -} _rl_search_cxt; - -/* Callback data for reading numeric arguments */ -#define NUM_SAWMINUS 0x01 -#define NUM_SAWDIGITS 0x02 -#define NUM_READONE 0x04 - -typedef int _rl_arg_cxt; - -/* A context for reading key sequences longer than a single character when - using the callback interface. */ -#define KSEQ_DISPATCHED 0x01 -#define KSEQ_SUBSEQ 0x02 -#define KSEQ_RECURSIVE 0x04 - -typedef struct __rl_keyseq_context -{ - int flags; - int subseq_arg; - int subseq_retval; /* XXX */ - int okey; - - Keymap dmap; - Keymap oldmap; - - struct __rl_keyseq_context *ocxt; - int childval; -} _rl_keyseq_cxt; - -/* vi-mode commands that use result of motion command to define boundaries */ -#define VIM_DELETE 0x01 -#define VIM_CHANGE 0x02 -#define VIM_YANK 0x04 - -/* various states for vi-mode commands that use motion commands. reflects - RL_READLINE_STATE */ -#define VMSTATE_READ 0x01 -#define VMSTATE_NUMARG 0x02 - -typedef struct __rl_vimotion_context -{ - int op; - int state; - int flags; /* reserved */ - _rl_arg_cxt ncxt; - int numeric_arg; - int start, end; /* rl_point, rl_end */ - int key, motion; /* initial key, motion command */ -} _rl_vimotion_cxt; - -/* fill in more as needed */ -/* `Generic' callback data and functions */ -typedef struct __rl_callback_generic_arg -{ - int count; - int i1, i2; - /* add here as needed */ -} _rl_callback_generic_arg; - -typedef int _rl_callback_func_t PARAMS((_rl_callback_generic_arg *)); - -typedef void _rl_sigcleanup_func_t PARAMS((int, void *)); - -/************************************************************************* - * * - * Global functions undocumented in texinfo manual and not in readline.h * - * * - *************************************************************************/ - -/************************************************************************* - * * - * Global variables undocumented in texinfo manual and not in readline.h * - * * - *************************************************************************/ - -/* complete.c */ -extern int rl_complete_with_tilde_expansion; -#if defined (VISIBLE_STATS) -extern int rl_visible_stats; -#endif /* VISIBLE_STATS */ -#if defined (COLOR_SUPPORT) -extern int _rl_colored_stats; -extern int _rl_colored_completion_prefix; -#endif - -/* readline.c */ -extern int rl_line_buffer_len; -extern int rl_arg_sign; -extern int rl_visible_prompt_length; -extern int rl_byte_oriented; - -/* display.c */ -extern int rl_display_fixed; - -/* parens.c */ -extern int rl_blink_matching_paren; - -/************************************************************************* - * * - * Global functions and variables unused and undocumented * - * * - *************************************************************************/ - -/* kill.c */ -extern int rl_set_retained_kills PARAMS((int)); - -/* terminal.c */ -extern void _rl_set_screen_size PARAMS((int, int)); - -/* undo.c */ -extern int _rl_fix_last_undo_of_type PARAMS((int, int, int)); - -/* util.c */ -extern char *_rl_savestring PARAMS((const char *)); - -/************************************************************************* - * * - * Functions and variables private to the readline library * - * * - *************************************************************************/ - -/* NOTE: Functions and variables prefixed with `_rl_' are - pseudo-global: they are global so they can be shared - between files in the readline library, but are not intended - to be visible to readline callers. */ - -/************************************************************************* - * Undocumented private functions * - *************************************************************************/ - -#if defined(READLINE_CALLBACKS) - -/* readline.c */ -extern void readline_internal_setup PARAMS((void)); -extern char *readline_internal_teardown PARAMS((int)); -extern int readline_internal_char PARAMS((void)); - -extern _rl_keyseq_cxt *_rl_keyseq_cxt_alloc PARAMS((void)); -extern void _rl_keyseq_cxt_dispose PARAMS((_rl_keyseq_cxt *)); -extern void _rl_keyseq_chain_dispose PARAMS((void)); - -extern int _rl_dispatch_callback PARAMS((_rl_keyseq_cxt *)); - -/* callback.c */ -extern _rl_callback_generic_arg *_rl_callback_data_alloc PARAMS((int)); -extern void _rl_callback_data_dispose PARAMS((_rl_callback_generic_arg *)); - -#endif /* READLINE_CALLBACKS */ - -/* bind.c */ -extern char *_rl_untranslate_macro_value PARAMS((char *, int)); - -/* complete.c */ -extern void _rl_reset_completion_state PARAMS((void)); -extern char _rl_find_completion_word PARAMS((int *, int *)); -extern void _rl_free_match_list PARAMS((char **)); - -/* display.c */ -extern char *_rl_strip_prompt PARAMS((char *)); -extern void _rl_reset_prompt PARAMS((void)); -extern void _rl_move_cursor_relative PARAMS((int, const char *)); -extern void _rl_move_vert PARAMS((int)); -extern void _rl_save_prompt PARAMS((void)); -extern void _rl_restore_prompt PARAMS((void)); -extern char *_rl_make_prompt_for_search PARAMS((int)); -extern void _rl_erase_at_end_of_line PARAMS((int)); -extern void _rl_clear_to_eol PARAMS((int)); -extern void _rl_clear_screen PARAMS((void)); -extern void _rl_update_final PARAMS((void)); -extern void _rl_redisplay_after_sigwinch PARAMS((void)); -extern void _rl_clean_up_for_exit PARAMS((void)); -extern void _rl_erase_entire_line PARAMS((void)); -extern int _rl_current_display_line PARAMS((void)); - -/* input.c */ -extern int _rl_any_typein PARAMS((void)); -extern int _rl_input_available PARAMS((void)); -extern int _rl_input_queued PARAMS((int)); -extern void _rl_insert_typein PARAMS((int)); -extern int _rl_unget_char PARAMS((int)); -extern int _rl_pushed_input_available PARAMS((void)); - -/* isearch.c */ -extern _rl_search_cxt *_rl_scxt_alloc PARAMS((int, int)); -extern void _rl_scxt_dispose PARAMS((_rl_search_cxt *, int)); - -extern int _rl_isearch_dispatch PARAMS((_rl_search_cxt *, int)); -extern int _rl_isearch_callback PARAMS((_rl_search_cxt *)); -extern int _rl_isearch_cleanup PARAMS((_rl_search_cxt *, int)); - -extern int _rl_search_getchar PARAMS((_rl_search_cxt *)); - -/* kill.c */ -#define BRACK_PASTE_PREF "\033[200~" -#define BRACK_PASTE_SUFF "\033[201~" - -#define BRACK_PASTE_LAST '~' -#define BRACK_PASTE_SLEN 6 - -#define BRACK_PASTE_INIT "\033[?2004h" -#define BRACK_PASTE_FINI "\033[?2004l\r" - -extern char *_rl_bracketed_text PARAMS((size_t *)); - -/* macro.c */ -extern void _rl_with_macro_input PARAMS((char *)); -extern int _rl_peek_macro_key PARAMS((void)); -extern int _rl_next_macro_key PARAMS((void)); -extern int _rl_prev_macro_key PARAMS((void)); -extern void _rl_push_executing_macro PARAMS((void)); -extern void _rl_pop_executing_macro PARAMS((void)); -extern void _rl_add_macro_char PARAMS((int)); -extern void _rl_kill_kbd_macro PARAMS((void)); - -/* misc.c */ -extern int _rl_arg_overflow PARAMS((void)); -extern void _rl_arg_init PARAMS((void)); -extern int _rl_arg_getchar PARAMS((void)); -extern int _rl_arg_callback PARAMS((_rl_arg_cxt)); -extern void _rl_reset_argument PARAMS((void)); - -extern void _rl_start_using_history PARAMS((void)); -extern int _rl_free_saved_history_line PARAMS((void)); -extern void _rl_set_insert_mode PARAMS((int, int)); - -extern void _rl_revert_all_lines PARAMS((void)); - -/* nls.c */ -extern char *_rl_init_locale PARAMS((void)); -extern int _rl_init_eightbit PARAMS((void)); - -/* parens.c */ -extern void _rl_enable_paren_matching PARAMS((int)); - -/* readline.c */ -extern void _rl_init_line_state PARAMS((void)); -extern void _rl_set_the_line PARAMS((void)); -extern int _rl_dispatch PARAMS((int, Keymap)); -extern int _rl_dispatch_subseq PARAMS((int, Keymap, int)); -extern void _rl_internal_char_cleanup PARAMS((void)); - -/* rltty.c */ -extern int _rl_disable_tty_signals PARAMS((void)); -extern int _rl_restore_tty_signals PARAMS((void)); - -/* search.c */ -extern int _rl_nsearch_callback PARAMS((_rl_search_cxt *)); -extern int _rl_nsearch_cleanup PARAMS((_rl_search_cxt *, int)); - -/* signals.c */ -extern void _rl_signal_handler PARAMS((int)); - -extern void _rl_block_sigint PARAMS((void)); -extern void _rl_release_sigint PARAMS((void)); -extern void _rl_block_sigwinch PARAMS((void)); -extern void _rl_release_sigwinch PARAMS((void)); - -/* terminal.c */ -extern void _rl_get_screen_size PARAMS((int, int)); -extern void _rl_sigwinch_resize_terminal PARAMS((void)); -extern int _rl_init_terminal_io PARAMS((const char *)); -#ifdef _MINIX -extern void _rl_output_character_function PARAMS((int)); -#else -extern int _rl_output_character_function PARAMS((int)); -#endif -extern void _rl_output_some_chars PARAMS((const char *, int)); -extern int _rl_backspace PARAMS((int)); -extern void _rl_enable_meta_key PARAMS((void)); -extern void _rl_disable_meta_key PARAMS((void)); -extern void _rl_control_keypad PARAMS((int)); -extern void _rl_set_cursor PARAMS((int, int)); - -/* text.c */ -extern void _rl_fix_point PARAMS((int)); -extern int _rl_replace_text PARAMS((const char *, int, int)); -extern int _rl_forward_char_internal PARAMS((int)); -extern int _rl_backward_char_internal PARAMS((int)); -extern int _rl_insert_char PARAMS((int, int)); -extern int _rl_overwrite_char PARAMS((int, int)); -extern int _rl_overwrite_rubout PARAMS((int, int)); -extern int _rl_rubout_char PARAMS((int, int)); -#if defined (HANDLE_MULTIBYTE) -extern int _rl_char_search_internal PARAMS((int, int, char *, int)); -#else -extern int _rl_char_search_internal PARAMS((int, int, int)); -#endif -extern int _rl_set_mark_at_pos PARAMS((int)); - -/* undo.c */ -extern UNDO_LIST *_rl_copy_undo_entry PARAMS((UNDO_LIST *)); -extern UNDO_LIST *_rl_copy_undo_list PARAMS((UNDO_LIST *)); -extern void _rl_free_undo_list PARAMS((UNDO_LIST *)); - -/* util.c */ -#if defined (USE_VARARGS) && defined (PREFER_STDARG) -extern void _rl_ttymsg (const char *, ...) __attribute__((__format__ (printf, 1, 2))); -extern void _rl_errmsg (const char *, ...) __attribute__((__format__ (printf, 1, 2))); -extern void _rl_trace (const char *, ...) __attribute__((__format__ (printf, 1, 2))); -#else -extern void _rl_ttymsg (); -extern void _rl_errmsg (); -extern void _rl_trace (); -#endif -extern void _rl_audit_tty PARAMS((char *)); - -extern int _rl_tropen PARAMS((void)); - -extern int _rl_abort_internal PARAMS((void)); -extern int _rl_null_function PARAMS((int, int)); -extern char *_rl_strindex PARAMS((const char *, const char *)); -extern int _rl_qsort_string_compare PARAMS((char **, char **)); -extern int (_rl_uppercase_p) PARAMS((int)); -extern int (_rl_lowercase_p) PARAMS((int)); -extern int (_rl_pure_alphabetic) PARAMS((int)); -extern int (_rl_digit_p) PARAMS((int)); -extern int (_rl_to_lower) PARAMS((int)); -extern int (_rl_to_upper) PARAMS((int)); -extern int (_rl_digit_value) PARAMS((int)); - -/* vi_mode.c */ -extern void _rl_vi_initialize_line PARAMS((void)); -extern void _rl_vi_reset_last PARAMS((void)); -extern void _rl_vi_set_last PARAMS((int, int, int)); -extern int _rl_vi_textmod_command PARAMS((int)); -extern int _rl_vi_motion_command PARAMS((int)); -extern void _rl_vi_done_inserting PARAMS((void)); -extern int _rl_vi_domove_callback PARAMS((_rl_vimotion_cxt *)); -extern int _rl_vi_domove_motion_cleanup PARAMS((int, _rl_vimotion_cxt *)); - -/************************************************************************* - * Undocumented private variables * - *************************************************************************/ - -/* bind.c */ -extern const char * const _rl_possible_control_prefixes[]; -extern const char * const _rl_possible_meta_prefixes[]; - -/* callback.c */ -extern _rl_callback_func_t *_rl_callback_func; -extern _rl_callback_generic_arg *_rl_callback_data; - -/* complete.c */ -extern int _rl_complete_show_all; -extern int _rl_complete_show_unmodified; -extern int _rl_complete_mark_directories; -extern int _rl_complete_mark_symlink_dirs; -extern int _rl_completion_prefix_display_length; -extern int _rl_completion_columns; -extern int _rl_print_completions_horizontally; -extern int _rl_completion_case_fold; -extern int _rl_completion_case_map; -extern int _rl_match_hidden_files; -extern int _rl_page_completions; -extern int _rl_skip_completed_text; -extern int _rl_menu_complete_prefix_first; - -/* display.c */ -extern int _rl_vis_botlin; -extern int _rl_last_c_pos; -extern int _rl_suppress_redisplay; -extern int _rl_want_redisplay; - -extern char *_rl_emacs_mode_str; -extern int _rl_emacs_modestr_len; -extern char *_rl_vi_ins_mode_str; -extern int _rl_vi_ins_modestr_len; -extern char *_rl_vi_cmd_mode_str; -extern int _rl_vi_cmd_modestr_len; - -/* isearch.c */ -extern char *_rl_isearch_terminators; - -extern _rl_search_cxt *_rl_iscxt; - -/* macro.c */ -extern char *_rl_executing_macro; - -/* misc.c */ -extern int _rl_history_preserve_point; -extern int _rl_history_saved_point; - -extern _rl_arg_cxt _rl_argcxt; - -/* nls.c */ -extern int _rl_utf8locale; - -/* readline.c */ -extern int _rl_echoing_p; -extern int _rl_horizontal_scroll_mode; -extern int _rl_mark_modified_lines; -extern int _rl_bell_preference; -extern int _rl_meta_flag; -extern int _rl_convert_meta_chars_to_ascii; -extern int _rl_output_meta_chars; -extern int _rl_bind_stty_chars; -extern int _rl_revert_all_at_newline; -extern int _rl_echo_control_chars; -extern int _rl_show_mode_in_prompt; -extern int _rl_enable_bracketed_paste; -extern char *_rl_comment_begin; -extern unsigned char _rl_parsing_conditionalized_out; -extern Keymap _rl_keymap; -extern FILE *_rl_in_stream; -extern FILE *_rl_out_stream; -extern int _rl_last_command_was_kill; -extern int _rl_eof_char; -extern int _rl_eof_found; -extern procenv_t _rl_top_level; -extern _rl_keyseq_cxt *_rl_kscxt; -extern int _rl_keyseq_timeout; - -extern int _rl_executing_keyseq_size; - -/* search.c */ -extern _rl_search_cxt *_rl_nscxt; - -/* signals.c */ -extern int _rl_interrupt_immediately; -extern int volatile _rl_caught_signal; - -extern _rl_sigcleanup_func_t *_rl_sigcleanup; -extern void *_rl_sigcleanarg; - -extern int _rl_echoctl; - -extern int _rl_intr_char; -extern int _rl_quit_char; -extern int _rl_susp_char; - -/* terminal.c */ -extern int _rl_enable_keypad; -extern int _rl_enable_meta; -extern char *_rl_term_clreol; -extern char *_rl_term_clrpag; -extern char *_rl_term_clrscroll; -extern char *_rl_term_im; -extern char *_rl_term_ic; -extern char *_rl_term_ei; -extern char *_rl_term_DC; -extern char *_rl_term_up; -extern char *_rl_term_dc; -extern char *_rl_term_cr; -extern char *_rl_term_IC; -extern char *_rl_term_forward_char; -extern int _rl_screenheight; -extern int _rl_screenwidth; -extern int _rl_screenchars; -extern int _rl_terminal_can_insert; -extern int _rl_term_autowrap; - -/* text.c */ -extern int _rl_optimize_typeahead; - -/* undo.c */ -extern int _rl_doing_an_undo; -extern int _rl_undo_group_level; - -/* vi_mode.c */ -extern int _rl_vi_last_command; -extern int _rl_vi_redoing; -extern _rl_vimotion_cxt *_rl_vimvcxt; - -#endif /* _RL_PRIVATE_H_ */ diff --git a/readline/rlshell.h b/readline/rlshell.h deleted file mode 100644 index 3e17d8bc7f..0000000000 --- a/readline/rlshell.h +++ /dev/null @@ -1,33 +0,0 @@ -/* rlshell.h -- utility functions normally provided by bash. */ - -/* Copyright (C) 1999-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RL_SHELL_H_) -#define _RL_SHELL_H_ - -#include "rlstdc.h" - -extern char *sh_single_quote PARAMS((char *)); -extern void sh_set_lines_and_columns PARAMS((int, int)); -extern char *sh_get_env_value PARAMS((const char *)); -extern char *sh_get_home_dir PARAMS((void)); -extern int sh_unset_nodelay_mode PARAMS((int)); - -#endif /* _RL_SHELL_H_ */ diff --git a/readline/rlstdc.h b/readline/rlstdc.h deleted file mode 100644 index 2aaa30babf..0000000000 --- a/readline/rlstdc.h +++ /dev/null @@ -1,57 +0,0 @@ -/* stdc.h -- macros to make source compile on both ANSI C and K&R C compilers. */ - -/* Copyright (C) 1993-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RL_STDC_H_) -#define _RL_STDC_H_ - -/* Adapted from BSD /usr/include/sys/cdefs.h. */ - -/* A function can be defined using prototypes and compile on both ANSI C - and traditional C compilers with something like this: - extern char *func PARAMS((char *, char *, int)); */ - -#if !defined (PARAMS) -# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) -# define PARAMS(protos) protos -# else -# define PARAMS(protos) () -# endif -#endif - -#ifndef __attribute__ -# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) -# define __attribute__(x) -# endif -#endif - -/* Moved from config.h.in because readline.h:rl_message depends on these - defines. */ -#if defined (__STDC__) && defined (HAVE_STDARG_H) -# define PREFER_STDARG -# define USE_VARARGS -#else -# if defined (HAVE_VARARGS_H) -# define PREFER_VARARGS -# define USE_VARARGS -# endif -#endif - -#endif /* !_RL_STDC_H_ */ diff --git a/readline/rltty.c b/readline/rltty.c deleted file mode 100644 index d0cd572713..0000000000 --- a/readline/rltty.c +++ /dev/null @@ -1,991 +0,0 @@ -/* rltty.c -- functions to prepare and restore the terminal for readline's - use. */ - -/* Copyright (C) 1992-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#include "rldefs.h" - -#include "rltty.h" -#if defined (HAVE_SYS_IOCTL_H) -# include /* include for declaration of ioctl */ -#endif - -#include "readline.h" -#include "rlprivate.h" - -#if !defined (errno) -extern int errno; -#endif /* !errno */ - -rl_vintfunc_t *rl_prep_term_function = rl_prep_terminal; -rl_voidfunc_t *rl_deprep_term_function = rl_deprep_terminal; - -static void set_winsize PARAMS((int)); - -/* **************************************************************** */ -/* */ -/* Saving and Restoring the TTY */ -/* */ -/* **************************************************************** */ - -/* Non-zero means that the terminal is in a prepped state. There are several - flags that are OR'd in to denote whether or not we have sent various - init strings to the terminal. */ -#define TPX_PREPPED 0x01 -#define TPX_BRACKPASTE 0x02 -#define TPX_METAKEY 0x04 - -static int terminal_prepped; - -static _RL_TTY_CHARS _rl_tty_chars, _rl_last_tty_chars; - -/* If non-zero, means that this process has called tcflow(fd, TCOOFF) - and output is suspended. */ -#if defined (__ksr1__) -static int ksrflow; -#endif - -/* Dummy call to force a backgrounded readline to stop before it tries - to get the tty settings. */ -static void -set_winsize (tty) - int tty; -{ -#if defined (TIOCGWINSZ) - struct winsize w; - - if (ioctl (tty, TIOCGWINSZ, &w) == 0) - (void) ioctl (tty, TIOCSWINSZ, &w); -#endif /* TIOCGWINSZ */ -} - -#if defined (NO_TTY_DRIVER) -/* Nothing */ -#elif defined (NEW_TTY_DRIVER) - -/* Values for the `flags' field of a struct bsdtty. This tells which - elements of the struct bsdtty have been fetched from the system and - are valid. */ -#define SGTTY_SET 0x01 -#define LFLAG_SET 0x02 -#define TCHARS_SET 0x04 -#define LTCHARS_SET 0x08 - -struct bsdtty { - struct sgttyb sgttyb; /* Basic BSD tty driver information. */ - int lflag; /* Local mode flags, like LPASS8. */ -#if defined (TIOCGETC) - struct tchars tchars; /* Terminal special characters, including ^S and ^Q. */ -#endif -#if defined (TIOCGLTC) - struct ltchars ltchars; /* 4.2 BSD editing characters */ -#endif - int flags; /* Bitmap saying which parts of the struct are valid. */ -}; - -#define TIOTYPE struct bsdtty - -static TIOTYPE otio; - -static void save_tty_chars PARAMS((TIOTYPE *)); -static int _get_tty_settings PARAMS((int, TIOTYPE *)); -static int get_tty_settings PARAMS((int, TIOTYPE *)); -static int _set_tty_settings PARAMS((int, TIOTYPE *)); -static int set_tty_settings PARAMS((int, TIOTYPE *)); - -static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *)); - -static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *)); - -static void -save_tty_chars (TIOTYPE *tiop) -{ - _rl_last_tty_chars = _rl_tty_chars; - - if (tiop->flags & SGTTY_SET) - { - _rl_tty_chars.t_erase = tiop->sgttyb.sg_erase; - _rl_tty_chars.t_kill = tiop->sgttyb.sg_kill; - } - - if (tiop->flags & TCHARS_SET) - { - _rl_intr_char = _rl_tty_chars.t_intr = tiop->tchars.t_intrc; - _rl_quit_char = _rl_tty_chars.t_quit = tiop->tchars.t_quitc; - - _rl_tty_chars.t_start = tiop->tchars.t_startc; - _rl_tty_chars.t_stop = tiop->tchars.t_stopc; - _rl_tty_chars.t_eof = tiop->tchars.t_eofc; - _rl_tty_chars.t_eol = '\n'; - _rl_tty_chars.t_eol2 = tiop->tchars.t_brkc; - } - - if (tiop->flags & LTCHARS_SET) - { - _rl_susp_char = _rl_tty_chars.t_susp = tiop->ltchars.t_suspc; - - _rl_tty_chars.t_dsusp = tiop->ltchars.t_dsuspc; - _rl_tty_chars.t_reprint = tiop->ltchars.t_rprntc; - _rl_tty_chars.t_flush = tiop->ltchars.t_flushc; - _rl_tty_chars.t_werase = tiop->ltchars.t_werasc; - _rl_tty_chars.t_lnext = tiop->ltchars.t_lnextc; - } - - _rl_tty_chars.t_status = -1; -} - -static int -get_tty_settings (int tty, TIOTYPE *tiop) -{ - set_winsize (tty); - - tiop->flags = tiop->lflag = 0; - - errno = 0; - if (ioctl (tty, TIOCGETP, &(tiop->sgttyb)) < 0) - return -1; - tiop->flags |= SGTTY_SET; - -#if defined (TIOCLGET) - if (ioctl (tty, TIOCLGET, &(tiop->lflag)) == 0) - tiop->flags |= LFLAG_SET; -#endif - -#if defined (TIOCGETC) - if (ioctl (tty, TIOCGETC, &(tiop->tchars)) == 0) - tiop->flags |= TCHARS_SET; -#endif - -#if defined (TIOCGLTC) - if (ioctl (tty, TIOCGLTC, &(tiop->ltchars)) == 0) - tiop->flags |= LTCHARS_SET; -#endif - - return 0; -} - -static int -set_tty_settings (int tty, TIOTYPE *tiop) -{ - if (tiop->flags & SGTTY_SET) - { - ioctl (tty, TIOCSETN, &(tiop->sgttyb)); - tiop->flags &= ~SGTTY_SET; - } - _rl_echoing_p = 1; - -#if defined (TIOCLSET) - if (tiop->flags & LFLAG_SET) - { - ioctl (tty, TIOCLSET, &(tiop->lflag)); - tiop->flags &= ~LFLAG_SET; - } -#endif - -#if defined (TIOCSETC) - if (tiop->flags & TCHARS_SET) - { - ioctl (tty, TIOCSETC, &(tiop->tchars)); - tiop->flags &= ~TCHARS_SET; - } -#endif - -#if defined (TIOCSLTC) - if (tiop->flags & LTCHARS_SET) - { - ioctl (tty, TIOCSLTC, &(tiop->ltchars)); - tiop->flags &= ~LTCHARS_SET; - } -#endif - - return 0; -} - -static void -prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop) -{ - _rl_echoing_p = (oldtio.sgttyb.sg_flags & ECHO); - _rl_echoctl = (oldtio.sgttyb.sg_flags & ECHOCTL); - - /* Copy the original settings to the structure we're going to use for - our settings. */ - tiop->sgttyb = oldtio.sgttyb; - tiop->lflag = oldtio.lflag; -#if defined (TIOCGETC) - tiop->tchars = oldtio.tchars; -#endif -#if defined (TIOCGLTC) - tiop->ltchars = oldtio.ltchars; -#endif - tiop->flags = oldtio.flags; - - /* First, the basic settings to put us into character-at-a-time, no-echo - input mode. */ - tiop->sgttyb.sg_flags &= ~(ECHO | CRMOD); - tiop->sgttyb.sg_flags |= CBREAK; - - /* If this terminal doesn't care how the 8th bit is used, then we can - use it for the meta-key. If only one of even or odd parity is - specified, then the terminal is using parity, and we cannot. */ -#if !defined (ANYP) -# define ANYP (EVENP | ODDP) -#endif - if (((oldtio.sgttyb.sg_flags & ANYP) == ANYP) || - ((oldtio.sgttyb.sg_flags & ANYP) == 0)) - { - tiop->sgttyb.sg_flags |= ANYP; - - /* Hack on local mode flags if we can. */ -#if defined (TIOCLGET) -# if defined (LPASS8) - tiop->lflag |= LPASS8; -# endif /* LPASS8 */ -#endif /* TIOCLGET */ - } - -#if defined (TIOCGETC) -# if defined (USE_XON_XOFF) - /* Get rid of terminal output start and stop characters. */ - tiop->tchars.t_stopc = -1; /* C-s */ - tiop->tchars.t_startc = -1; /* C-q */ - - /* If there is an XON character, bind it to restart the output. */ - if (oldtio.tchars.t_startc != -1) - rl_bind_key (oldtio.tchars.t_startc, rl_restart_output); -# endif /* USE_XON_XOFF */ - - /* If there is an EOF char, bind _rl_eof_char to it. */ - if (oldtio.tchars.t_eofc != -1) - _rl_eof_char = oldtio.tchars.t_eofc; - -# if defined (NO_KILL_INTR) - /* Get rid of terminal-generated SIGQUIT and SIGINT. */ - tiop->tchars.t_quitc = -1; /* C-\ */ - tiop->tchars.t_intrc = -1; /* C-c */ -# endif /* NO_KILL_INTR */ -#endif /* TIOCGETC */ - -#if defined (TIOCGLTC) - /* Make the interrupt keys go away. Just enough to make people happy. */ - tiop->ltchars.t_dsuspc = -1; /* C-y */ - tiop->ltchars.t_lnextc = -1; /* C-v */ -#endif /* TIOCGLTC */ -} - -#else /* !defined (NEW_TTY_DRIVER) */ - -#if !defined (VMIN) -# define VMIN VEOF -#endif - -#if !defined (VTIME) -# define VTIME VEOL -#endif - -#if defined (TERMIOS_TTY_DRIVER) -# define TIOTYPE struct termios -# define DRAIN_OUTPUT(fd) tcdrain (fd) -# define GETATTR(tty, tiop) (tcgetattr (tty, tiop)) -# ifdef M_UNIX -# define SETATTR(tty, tiop) (tcsetattr (tty, TCSANOW, tiop)) -# else -# define SETATTR(tty, tiop) (tcsetattr (tty, TCSADRAIN, tiop)) -# endif /* !M_UNIX */ -#else -# define TIOTYPE struct termio -# define DRAIN_OUTPUT(fd) -# define GETATTR(tty, tiop) (ioctl (tty, TCGETA, tiop)) -# define SETATTR(tty, tiop) (ioctl (tty, TCSETAW, tiop)) -#endif /* !TERMIOS_TTY_DRIVER */ - -static TIOTYPE otio; - -static void save_tty_chars PARAMS((TIOTYPE *)); -static int _get_tty_settings PARAMS((int, TIOTYPE *)); -static int get_tty_settings PARAMS((int, TIOTYPE *)); -static int _set_tty_settings PARAMS((int, TIOTYPE *)); -static int set_tty_settings PARAMS((int, TIOTYPE *)); - -static void prepare_terminal_settings PARAMS((int, TIOTYPE, TIOTYPE *)); - -static void set_special_char PARAMS((Keymap, TIOTYPE *, int, rl_command_func_t *)); -static void _rl_bind_tty_special_chars PARAMS((Keymap, TIOTYPE)); - -#if defined (FLUSHO) -# define OUTPUT_BEING_FLUSHED(tp) (tp->c_lflag & FLUSHO) -#else -# define OUTPUT_BEING_FLUSHED(tp) 0 -#endif - -static void -save_tty_chars (TIOTYPE *tiop) -{ - _rl_last_tty_chars = _rl_tty_chars; - - _rl_tty_chars.t_eof = tiop->c_cc[VEOF]; - _rl_tty_chars.t_eol = tiop->c_cc[VEOL]; -#ifdef VEOL2 - _rl_tty_chars.t_eol2 = tiop->c_cc[VEOL2]; -#endif - _rl_tty_chars.t_erase = tiop->c_cc[VERASE]; -#ifdef VWERASE - _rl_tty_chars.t_werase = tiop->c_cc[VWERASE]; -#endif - _rl_tty_chars.t_kill = tiop->c_cc[VKILL]; -#ifdef VREPRINT - _rl_tty_chars.t_reprint = tiop->c_cc[VREPRINT]; -#endif - _rl_intr_char = _rl_tty_chars.t_intr = tiop->c_cc[VINTR]; - _rl_quit_char = _rl_tty_chars.t_quit = tiop->c_cc[VQUIT]; -#ifdef VSUSP - _rl_susp_char = _rl_tty_chars.t_susp = tiop->c_cc[VSUSP]; -#endif -#ifdef VDSUSP - _rl_tty_chars.t_dsusp = tiop->c_cc[VDSUSP]; -#endif -#ifdef VSTART - _rl_tty_chars.t_start = tiop->c_cc[VSTART]; -#endif -#ifdef VSTOP - _rl_tty_chars.t_stop = tiop->c_cc[VSTOP]; -#endif -#ifdef VLNEXT - _rl_tty_chars.t_lnext = tiop->c_cc[VLNEXT]; -#endif -#ifdef VDISCARD - _rl_tty_chars.t_flush = tiop->c_cc[VDISCARD]; -#endif -#ifdef VSTATUS - _rl_tty_chars.t_status = tiop->c_cc[VSTATUS]; -#endif -} - -#if defined (_AIX) || defined (_AIX41) -/* Currently this is only used on AIX */ -static void -rltty_warning (char *msg) -{ - _rl_errmsg ("warning: %s", msg); -} -#endif - -#if defined (_AIX) -void -setopost (TIOTYPE *tp) -{ - if ((tp->c_oflag & OPOST) == 0) - { - _rl_errmsg ("warning: turning on OPOST for terminal\r"); - tp->c_oflag |= OPOST|ONLCR; - } -} -#endif - -static int -_get_tty_settings (int tty, TIOTYPE *tiop) -{ - int ioctl_ret; - - while (1) - { - ioctl_ret = GETATTR (tty, tiop); - if (ioctl_ret < 0) - { - if (errno != EINTR) - return -1; - else - continue; - } - if (OUTPUT_BEING_FLUSHED (tiop)) - { -#if defined (FLUSHO) - _rl_errmsg ("warning: turning off output flushing"); - tiop->c_lflag &= ~FLUSHO; - break; -#else - continue; -#endif - } - break; - } - - return 0; -} - -static int -get_tty_settings (int tty, TIOTYPE *tiop) -{ - set_winsize (tty); - - errno = 0; - if (_get_tty_settings (tty, tiop) < 0) - return -1; - -#if defined (_AIX) - setopost(tiop); -#endif - - return 0; -} - -static int -_set_tty_settings (int tty, TIOTYPE *tiop) -{ - while (SETATTR (tty, tiop) < 0) - { - if (errno != EINTR) - return -1; - errno = 0; - } - return 0; -} - -static int -set_tty_settings (int tty, TIOTYPE *tiop) -{ - if (_set_tty_settings (tty, tiop) < 0) - return -1; - -#if 0 - -#if defined (TERMIOS_TTY_DRIVER) -# if defined (__ksr1__) - if (ksrflow) - { - ksrflow = 0; - tcflow (tty, TCOON); - } -# else /* !ksr1 */ - tcflow (tty, TCOON); /* Simulate a ^Q. */ -# endif /* !ksr1 */ -#else - ioctl (tty, TCXONC, 1); /* Simulate a ^Q. */ -#endif /* !TERMIOS_TTY_DRIVER */ - -#endif /* 0 */ - - return 0; -} - -static void -prepare_terminal_settings (int meta_flag, TIOTYPE oldtio, TIOTYPE *tiop) -{ - int sc; - Keymap kmap; - - _rl_echoing_p = (oldtio.c_lflag & ECHO); -#if defined (ECHOCTL) - _rl_echoctl = (oldtio.c_lflag & ECHOCTL); -#endif - - tiop->c_lflag &= ~(ICANON | ECHO); - - if ((unsigned char) oldtio.c_cc[VEOF] != (unsigned char) _POSIX_VDISABLE) - _rl_eof_char = oldtio.c_cc[VEOF]; - -#if defined (USE_XON_XOFF) -#if defined (IXANY) - tiop->c_iflag &= ~(IXON | IXANY); -#else - /* `strict' Posix systems do not define IXANY. */ - tiop->c_iflag &= ~IXON; -#endif /* IXANY */ -#endif /* USE_XON_XOFF */ - - /* Only turn this off if we are using all 8 bits. */ - if (((tiop->c_cflag & CSIZE) == CS8) || meta_flag) - tiop->c_iflag &= ~(ISTRIP | INPCK); - - /* Make sure we differentiate between CR and NL on input. */ - tiop->c_iflag &= ~(ICRNL | INLCR); - -#if !defined (HANDLE_SIGNALS) - tiop->c_lflag &= ~ISIG; -#else - tiop->c_lflag |= ISIG; -#endif - - tiop->c_cc[VMIN] = 1; - tiop->c_cc[VTIME] = 0; - -#if defined (FLUSHO) - if (OUTPUT_BEING_FLUSHED (tiop)) - { - tiop->c_lflag &= ~FLUSHO; - oldtio.c_lflag &= ~FLUSHO; - } -#endif - - /* Turn off characters that we need on Posix systems with job control, - just to be sure. This includes ^Y and ^V. This should not really - be necessary. */ -#if defined (TERMIOS_TTY_DRIVER) && defined (_POSIX_VDISABLE) - -#if defined (VLNEXT) - tiop->c_cc[VLNEXT] = _POSIX_VDISABLE; -#endif - -#if defined (VDSUSP) - tiop->c_cc[VDSUSP] = _POSIX_VDISABLE; -#endif - - /* Conditionally disable some other tty special characters if there is a - key binding for them in the current keymap. Readline ordinarily doesn't - bind these characters, but an application or user might. */ -#if defined (VI_MODE) - kmap = (rl_editing_mode == vi_mode) ? vi_insertion_keymap : _rl_keymap; -#else - kmap = _rl_keymap; -#endif -#if defined (VDISCARD) - sc = tiop->c_cc[VDISCARD]; - if (sc != _POSIX_VDISABLE && kmap[(unsigned char)sc].type == ISFUNC) - tiop->c_cc[VDISCARD] = _POSIX_VDISABLE; -#endif /* VDISCARD */ - -#endif /* TERMIOS_TTY_DRIVER && _POSIX_VDISABLE */ -} -#endif /* !NEW_TTY_DRIVER */ - -/* Put the terminal in CBREAK mode so that we can detect key presses. */ -#if defined (NO_TTY_DRIVER) -void -rl_prep_terminal (int meta_flag) -{ - _rl_echoing_p = 1; -} - -void -rl_deprep_terminal (void) -{ -} - -#else /* ! NO_TTY_DRIVER */ -void -rl_prep_terminal (int meta_flag) -{ - int tty, nprep; - TIOTYPE tio; - - if (terminal_prepped) - return; - - /* Try to keep this function from being INTerrupted. */ - _rl_block_sigint (); - - tty = rl_instream ? fileno (rl_instream) : fileno (stdin); - - if (get_tty_settings (tty, &tio) < 0) - { -#if defined (ENOTSUP) - /* MacOS X and Linux, at least, lie about the value of errno if - tcgetattr fails. */ - if (errno == ENOTTY || errno == EINVAL || errno == ENOTSUP) -#else - if (errno == ENOTTY || errno == EINVAL) -#endif - _rl_echoing_p = 1; /* XXX */ - - _rl_release_sigint (); - return; - } - - otio = tio; - - if (_rl_bind_stty_chars) - { -#if defined (VI_MODE) - /* If editing in vi mode, make sure we restore the bindings in the - insertion keymap no matter what keymap we ended up in. */ - if (rl_editing_mode == vi_mode) - rl_tty_unset_default_bindings (vi_insertion_keymap); - else -#endif - rl_tty_unset_default_bindings (_rl_keymap); - } - save_tty_chars (&otio); - RL_SETSTATE(RL_STATE_TTYCSAVED); - if (_rl_bind_stty_chars) - { -#if defined (VI_MODE) - /* If editing in vi mode, make sure we set the bindings in the - insertion keymap no matter what keymap we ended up in. */ - if (rl_editing_mode == vi_mode) - _rl_bind_tty_special_chars (vi_insertion_keymap, tio); - else -#endif - _rl_bind_tty_special_chars (_rl_keymap, tio); - } - - prepare_terminal_settings (meta_flag, otio, &tio); - - if (set_tty_settings (tty, &tio) < 0) - { - _rl_release_sigint (); - return; - } - - if (_rl_enable_keypad) - _rl_control_keypad (1); - - nprep = TPX_PREPPED; - - if (_rl_enable_bracketed_paste) - { - fprintf (rl_outstream, BRACK_PASTE_INIT); - nprep |= TPX_BRACKPASTE; - } - - fflush (rl_outstream); - terminal_prepped = nprep; - RL_SETSTATE(RL_STATE_TERMPREPPED); - - _rl_release_sigint (); -} - -/* Restore the terminal's normal settings and modes. */ -void -rl_deprep_terminal (void) -{ - int tty; - - if (terminal_prepped == 0) - return; - - /* Try to keep this function from being interrupted. */ - _rl_block_sigint (); - - tty = rl_instream ? fileno (rl_instream) : fileno (stdin); - - if (terminal_prepped & TPX_BRACKPASTE) - { - fprintf (rl_outstream, BRACK_PASTE_FINI); - if (_rl_eof_found) - fprintf (rl_outstream, "\n"); - } - - if (_rl_enable_keypad) - _rl_control_keypad (0); - - fflush (rl_outstream); - - if (set_tty_settings (tty, &otio) < 0) - { - _rl_release_sigint (); - return; - } - - terminal_prepped = 0; - RL_UNSETSTATE(RL_STATE_TERMPREPPED); - - _rl_release_sigint (); -} -#endif /* !NO_TTY_DRIVER */ - -/* Set readline's idea of whether or not it is echoing output to the terminal, - returning the old value. */ -int -rl_tty_set_echoing (int u) -{ - int o; - - o = _rl_echoing_p; - _rl_echoing_p = u; - return o; -} - -/* **************************************************************** */ -/* */ -/* Bogus Flow Control */ -/* */ -/* **************************************************************** */ - -int -rl_restart_output (int count, int key) -{ -#if defined (__MINGW32__) - return 0; -#else /* !__MING32__ */ - - int fildes = fileno (rl_outstream); -#if defined (TIOCSTART) -#if defined (apollo) - ioctl (&fildes, TIOCSTART, 0); -#else - ioctl (fildes, TIOCSTART, 0); -#endif /* apollo */ - -#else /* !TIOCSTART */ -# if defined (TERMIOS_TTY_DRIVER) -# if defined (__ksr1__) - if (ksrflow) - { - ksrflow = 0; - tcflow (fildes, TCOON); - } -# else /* !ksr1 */ - tcflow (fildes, TCOON); /* Simulate a ^Q. */ -# endif /* !ksr1 */ -# else /* !TERMIOS_TTY_DRIVER */ -# if defined (TCXONC) - ioctl (fildes, TCXONC, TCOON); -# endif /* TCXONC */ -# endif /* !TERMIOS_TTY_DRIVER */ -#endif /* !TIOCSTART */ - - return 0; -#endif /* !__MINGW32__ */ -} - -int -rl_stop_output (int count, int key) -{ -#if defined (__MINGW32__) - return 0; -#else - - int fildes = fileno (rl_instream); - -#if defined (TIOCSTOP) -# if defined (apollo) - ioctl (&fildes, TIOCSTOP, 0); -# else - ioctl (fildes, TIOCSTOP, 0); -# endif /* apollo */ -#else /* !TIOCSTOP */ -# if defined (TERMIOS_TTY_DRIVER) -# if defined (__ksr1__) - ksrflow = 1; -# endif /* ksr1 */ - tcflow (fildes, TCOOFF); -# else -# if defined (TCXONC) - ioctl (fildes, TCXONC, TCOON); -# endif /* TCXONC */ -# endif /* !TERMIOS_TTY_DRIVER */ -#endif /* !TIOCSTOP */ - - return 0; -#endif /* !__MINGW32__ */ -} - -/* **************************************************************** */ -/* */ -/* Default Key Bindings */ -/* */ -/* **************************************************************** */ - -#if !defined (NO_TTY_DRIVER) -#define SET_SPECIAL(sc, func) set_special_char(kmap, &ttybuff, sc, func) -#endif - -#if defined (NO_TTY_DRIVER) - -#define SET_SPECIAL(sc, func) -#define RESET_SPECIAL(c) - -#elif defined (NEW_TTY_DRIVER) -static void -set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func) -{ - if (sc != -1 && kmap[(unsigned char)sc].type == ISFUNC) - kmap[(unsigned char)sc].function = func; -} - -#define RESET_SPECIAL(c) \ - if (c != -1 && kmap[(unsigned char)c].type == ISFUNC) \ - kmap[(unsigned char)c].function = rl_insert; - -static void -_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff) -{ - if (ttybuff.flags & SGTTY_SET) - { - SET_SPECIAL (ttybuff.sgttyb.sg_erase, rl_rubout); - SET_SPECIAL (ttybuff.sgttyb.sg_kill, rl_unix_line_discard); - } - -# if defined (TIOCGLTC) - if (ttybuff.flags & LTCHARS_SET) - { - SET_SPECIAL (ttybuff.ltchars.t_werasc, rl_unix_word_rubout); - SET_SPECIAL (ttybuff.ltchars.t_lnextc, rl_quoted_insert); - } -# endif /* TIOCGLTC */ -} - -#else /* !NEW_TTY_DRIVER */ -static void -set_special_char (Keymap kmap, TIOTYPE *tiop, int sc, rl_command_func_t *func) -{ - unsigned char uc; - - uc = tiop->c_cc[sc]; - if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) - kmap[uc].function = func; -} - -/* used later */ -#define RESET_SPECIAL(uc) \ - if (uc != (unsigned char)_POSIX_VDISABLE && kmap[uc].type == ISFUNC) \ - kmap[uc].function = rl_insert; - -static void -_rl_bind_tty_special_chars (Keymap kmap, TIOTYPE ttybuff) -{ - SET_SPECIAL (VERASE, rl_rubout); - SET_SPECIAL (VKILL, rl_unix_line_discard); - -# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER) - SET_SPECIAL (VLNEXT, rl_quoted_insert); -# endif /* VLNEXT && TERMIOS_TTY_DRIVER */ - -# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER) -# if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - SET_SPECIAL (VWERASE, rl_vi_unix_word_rubout); - else -# endif - SET_SPECIAL (VWERASE, rl_unix_word_rubout); -# endif /* VWERASE && TERMIOS_TTY_DRIVER */ -} - -#endif /* !NEW_TTY_DRIVER */ - -/* Set the system's default editing characters to their readline equivalents - in KMAP. Should be static, now that we have rl_tty_set_default_bindings. */ -void -rltty_set_default_bindings (Keymap kmap) -{ -#if !defined (NO_TTY_DRIVER) - TIOTYPE ttybuff; - int tty; - - tty = fileno (rl_instream); - - if (get_tty_settings (tty, &ttybuff) == 0) - _rl_bind_tty_special_chars (kmap, ttybuff); -#endif -} - -/* New public way to set the system default editing chars to their readline - equivalents. */ -void -rl_tty_set_default_bindings (Keymap kmap) -{ - rltty_set_default_bindings (kmap); -} - -/* Rebind all of the tty special chars that readline worries about back - to self-insert. Call this before saving the current terminal special - chars with save_tty_chars(). This only works on POSIX termios or termio - systems. */ -void -rl_tty_unset_default_bindings (Keymap kmap) -{ - /* Don't bother before we've saved the tty special chars at least once. */ - if (RL_ISSTATE(RL_STATE_TTYCSAVED) == 0) - return; - - RESET_SPECIAL (_rl_tty_chars.t_erase); - RESET_SPECIAL (_rl_tty_chars.t_kill); - -# if defined (VLNEXT) && defined (TERMIOS_TTY_DRIVER) - RESET_SPECIAL (_rl_tty_chars.t_lnext); -# endif /* VLNEXT && TERMIOS_TTY_DRIVER */ - -# if defined (VWERASE) && defined (TERMIOS_TTY_DRIVER) - RESET_SPECIAL (_rl_tty_chars.t_werase); -# endif /* VWERASE && TERMIOS_TTY_DRIVER */ -} - -#if defined (HANDLE_SIGNALS) - -#if defined (NEW_TTY_DRIVER) || defined (NO_TTY_DRIVER) -int -_rl_disable_tty_signals (void) -{ - return 0; -} - -int -_rl_restore_tty_signals (void) -{ - return 0; -} -#else - -static TIOTYPE sigstty, nosigstty; -static int tty_sigs_disabled = 0; - -int -_rl_disable_tty_signals (void) -{ - if (tty_sigs_disabled) - return 0; - - if (_get_tty_settings (fileno (rl_instream), &sigstty) < 0) - return -1; - - nosigstty = sigstty; - - nosigstty.c_lflag &= ~ISIG; - nosigstty.c_iflag &= ~IXON; - - if (_set_tty_settings (fileno (rl_instream), &nosigstty) < 0) - return (_set_tty_settings (fileno (rl_instream), &sigstty)); - - tty_sigs_disabled = 1; - return 0; -} - -int -_rl_restore_tty_signals (void) -{ - int r; - - if (tty_sigs_disabled == 0) - return 0; - - r = _set_tty_settings (fileno (rl_instream), &sigstty); - - if (r == 0) - tty_sigs_disabled = 0; - - return r; -} -#endif /* !NEW_TTY_DRIVER */ - -#endif /* HANDLE_SIGNALS */ diff --git a/readline/rltty.h b/readline/rltty.h deleted file mode 100644 index 5bcc946b27..0000000000 --- a/readline/rltty.h +++ /dev/null @@ -1,80 +0,0 @@ -/* rltty.h - tty driver-related definitions used by some library files. */ - -/* Copyright (C) 1995-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RLTTY_H_) -#define _RLTTY_H_ - -/* Posix systems use termios and the Posix signal functions. */ -#if defined (TERMIOS_TTY_DRIVER) -# include -#endif /* TERMIOS_TTY_DRIVER */ - -/* System V machines use termio. */ -#if defined (TERMIO_TTY_DRIVER) -# include -# if !defined (TCOON) -# define TCOON 1 -# endif -#endif /* TERMIO_TTY_DRIVER */ - -/* Other (BSD) machines use sgtty. */ -#if defined (NEW_TTY_DRIVER) -# include -#endif - -#include "rlwinsize.h" - -/* Define _POSIX_VDISABLE if we are not using the `new' tty driver and - it is not already defined. It is used both to determine if a - special character is disabled and to disable certain special - characters. Posix systems should set to 0, USG systems to -1. */ -#if !defined (NEW_TTY_DRIVER) && !defined (_POSIX_VDISABLE) -# if defined (_SVR4_VDISABLE) -# define _POSIX_VDISABLE _SVR4_VDISABLE -# else -# if defined (_POSIX_VERSION) -# define _POSIX_VDISABLE 0 -# else /* !_POSIX_VERSION */ -# define _POSIX_VDISABLE -1 -# endif /* !_POSIX_VERSION */ -# endif /* !_SVR4_DISABLE */ -#endif /* !NEW_TTY_DRIVER && !_POSIX_VDISABLE */ - -typedef struct _rl_tty_chars { - unsigned char t_eof; - unsigned char t_eol; - unsigned char t_eol2; - unsigned char t_erase; - unsigned char t_werase; - unsigned char t_kill; - unsigned char t_reprint; - unsigned char t_intr; - unsigned char t_quit; - unsigned char t_susp; - unsigned char t_dsusp; - unsigned char t_start; - unsigned char t_stop; - unsigned char t_lnext; - unsigned char t_flush; - unsigned char t_status; -} _RL_TTY_CHARS; - -#endif /* _RLTTY_H_ */ diff --git a/readline/rltypedefs.h b/readline/rltypedefs.h deleted file mode 100644 index f9f5cd3a5b..0000000000 --- a/readline/rltypedefs.h +++ /dev/null @@ -1,100 +0,0 @@ -/* rltypedefs.h -- Type declarations for readline functions. */ - -/* Copyright (C) 2000-2011 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#ifndef _RL_TYPEDEFS_H_ -#define _RL_TYPEDEFS_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* Old-style, attempt to mark as deprecated in some way people will notice. */ - -#if !defined (_FUNCTION_DEF) -# define _FUNCTION_DEF - -#if defined(__GNUC__) || defined(__clang__) -typedef int Function () __attribute__ ((deprecated)); -typedef void VFunction () __attribute__ ((deprecated)); -typedef char *CPFunction () __attribute__ ((deprecated)); -typedef char **CPPFunction () __attribute__ ((deprecated)); -#else -typedef int Function (); -typedef void VFunction (); -typedef char *CPFunction (); -typedef char **CPPFunction (); -#endif - -#endif /* _FUNCTION_DEF */ - -/* New style. */ - -#if !defined (_RL_FUNCTION_TYPEDEF) -# define _RL_FUNCTION_TYPEDEF - -/* Bindable functions */ -typedef int rl_command_func_t PARAMS((int, int)); - -/* Typedefs for the completion system */ -typedef char *rl_compentry_func_t PARAMS((const char *, int)); -typedef char **rl_completion_func_t PARAMS((const char *, int, int)); - -typedef char *rl_quote_func_t PARAMS((char *, int, char *)); -typedef char *rl_dequote_func_t PARAMS((char *, int)); - -typedef int rl_compignore_func_t PARAMS((char **)); - -typedef void rl_compdisp_func_t PARAMS((char **, int, int)); - -/* Type for input and pre-read hook functions like rl_event_hook */ -typedef int rl_hook_func_t PARAMS((void)); - -/* Input function type */ -typedef int rl_getc_func_t PARAMS((FILE *)); - -/* Generic function that takes a character buffer (which could be the readline - line buffer) and an index into it (which could be rl_point) and returns - an int. */ -typedef int rl_linebuf_func_t PARAMS((char *, int)); - -/* `Generic' function pointer typedefs */ -typedef int rl_intfunc_t PARAMS((int)); -#define rl_ivoidfunc_t rl_hook_func_t -typedef int rl_icpfunc_t PARAMS((char *)); -typedef int rl_icppfunc_t PARAMS((char **)); - -typedef void rl_voidfunc_t PARAMS((void)); -typedef void rl_vintfunc_t PARAMS((int)); -typedef void rl_vcpfunc_t PARAMS((char *)); -typedef void rl_vcppfunc_t PARAMS((char **)); - -typedef char *rl_cpvfunc_t PARAMS((void)); -typedef char *rl_cpifunc_t PARAMS((int)); -typedef char *rl_cpcpfunc_t PARAMS((char *)); -typedef char *rl_cpcppfunc_t PARAMS((char **)); - -#endif /* _RL_FUNCTION_TYPEDEF */ - -#ifdef __cplusplus -} -#endif - -#endif /* _RL_TYPEDEFS_H_ */ diff --git a/readline/rlwinsize.h b/readline/rlwinsize.h deleted file mode 100644 index d198fcf872..0000000000 --- a/readline/rlwinsize.h +++ /dev/null @@ -1,58 +0,0 @@ -/* rlwinsize.h -- an attempt to isolate some of the system-specific defines - for `struct winsize' and TIOCGWINSZ. */ - -/* Copyright (C) 1997-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RLWINSIZE_H_) -#define _RLWINSIZE_H_ - -#if defined (HAVE_CONFIG_H) -# include "config.h" -#endif - -/* Try to find the definitions of `struct winsize' and TIOGCWINSZ */ - -#if defined (GWINSZ_IN_SYS_IOCTL) && !defined (TIOCGWINSZ) -# include -#endif /* GWINSZ_IN_SYS_IOCTL && !TIOCGWINSZ */ - -#if defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) -# include -#endif /* STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ - -/* Not in either of the standard places, look around. */ -#if !defined (STRUCT_WINSIZE_IN_TERMIOS) && !defined (STRUCT_WINSIZE_IN_SYS_IOCTL) -# if defined (HAVE_SYS_STREAM_H) -# include -# endif /* HAVE_SYS_STREAM_H */ -# if defined (HAVE_SYS_PTEM_H) /* SVR4.2, at least, has it here */ -# include -# define _IO_PTEM_H /* work around SVR4.2 1.1.4 bug */ -# endif /* HAVE_SYS_PTEM_H */ -# if defined (HAVE_SYS_PTE_H) /* ??? */ -# include -# endif /* HAVE_SYS_PTE_H */ -#endif /* !STRUCT_WINSIZE_IN_TERMIOS && !STRUCT_WINSIZE_IN_SYS_IOCTL */ - -#if defined (M_UNIX) && !defined (_SCO_DS) && !defined (tcflow) -# define tcflow(fd, action) ioctl(fd, TCXONC, action) -#endif - -#endif /* _RL_WINSIZE_H */ diff --git a/readline/savestring.c b/readline/savestring.c deleted file mode 100644 index f4bb6aa1a9..0000000000 --- a/readline/savestring.c +++ /dev/null @@ -1,40 +0,0 @@ -/* savestring.c - function version of savestring for backwards compatibility */ - -/* Copyright (C) 1998,2003,2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#include -#ifdef HAVE_STRING_H -# include -#endif -#include "xmalloc.h" - -/* Backwards compatibility, now that savestring has been removed from - all `public' readline header files. */ -char * -savestring (const char *s) -{ - char *ret; - - ret = (char *)xmalloc (strlen (s) + 1); - strcpy (ret, s); - return ret; -} diff --git a/readline/search.c b/readline/search.c deleted file mode 100644 index c9c1f5d1dd..0000000000 --- a/readline/search.c +++ /dev/null @@ -1,658 +0,0 @@ -/* search.c - code for non-incremental searching in emacs and vi modes. */ - -/* Copyright (C) 1992-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif - -#include "rldefs.h" -#include "rlmbutil.h" - -#include "readline.h" -#include "history.h" -#include "histlib.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -#ifdef abs -# undef abs -#endif -#define abs(x) (((x) >= 0) ? (x) : -(x)) - -_rl_search_cxt *_rl_nscxt = 0; - -extern HIST_ENTRY *_rl_saved_line_for_history; - -/* Functions imported from the rest of the library. */ -extern void _rl_free_history_entry PARAMS((HIST_ENTRY *)); - -static char *noninc_search_string = (char *) NULL; -static int noninc_history_pos; - -static char *prev_line_found = (char *) NULL; - -static int rl_history_search_len; -static int rl_history_search_pos; -static int rl_history_search_flags; - -static char *history_search_string; -static int history_string_size; - -static void make_history_line_current PARAMS((HIST_ENTRY *)); -static int noninc_search_from_pos PARAMS((char *, int, int, int, int *)); -static int noninc_dosearch PARAMS((char *, int, int)); -static int noninc_search PARAMS((int, int)); -static int rl_history_search_internal PARAMS((int, int)); -static void rl_history_search_reinit PARAMS((int)); - -static _rl_search_cxt *_rl_nsearch_init PARAMS((int, int)); -static void _rl_nsearch_abort PARAMS((_rl_search_cxt *)); -static int _rl_nsearch_dispatch PARAMS((_rl_search_cxt *, int)); - -/* Make the data from the history entry ENTRY be the contents of the - current line. This doesn't do anything with rl_point; the caller - must set it. */ -static void -make_history_line_current (HIST_ENTRY *entry) -{ - _rl_replace_text (entry->line, 0, rl_end); - _rl_fix_point (1); -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - /* POSIX.2 says that the `U' command doesn't affect the copy of any - command lines to the edit line. We're going to implement that by - making the undo list start after the matching line is copied to the - current editing buffer. */ - rl_free_undo_list (); -#endif - - if (_rl_saved_line_for_history) - _rl_free_history_entry (_rl_saved_line_for_history); - _rl_saved_line_for_history = (HIST_ENTRY *)NULL; -} - -/* Search the history list for STRING starting at absolute history position - POS. If STRING begins with `^', the search must match STRING at the - beginning of a history line, otherwise a full substring match is performed - for STRING. DIR < 0 means to search backwards through the history list, - DIR >= 0 means to search forward. */ -static int -noninc_search_from_pos (char *string, int pos, int dir, int flags, int *ncp) -{ - int ret, old, sflags; - char *s; - - if (pos < 0) - return -1; - - old = where_history (); - if (history_set_pos (pos) == 0) - return -1; - - RL_SETSTATE(RL_STATE_SEARCH); - /* These functions return the match offset in the line; history_offset gives - the matching line in the history list */ - if (flags & SF_PATTERN) - { - s = string; - sflags = 0; /* Non-anchored search */ - if (*s == '^') - { - sflags |= ANCHORED_SEARCH; - s++; - } - ret = _hs_history_patsearch (s, dir, sflags); - } - else if (*string == '^') - ret = history_search_prefix (string + 1, dir); - else - ret = history_search (string, dir); - RL_UNSETSTATE(RL_STATE_SEARCH); - - if (ncp) - *ncp = ret; /* caller will catch -1 to indicate no-op */ - - if (ret != -1) - ret = where_history (); - - history_set_pos (old); - return (ret); -} - -/* Search for a line in the history containing STRING. If DIR is < 0, the - search is backwards through previous entries, else through subsequent - entries. Returns 1 if the search was successful, 0 otherwise. */ -static int -noninc_dosearch (char *string, int dir, int flags) -{ - int oldpos, pos; - HIST_ENTRY *entry; - - if (string == 0 || *string == '\0' || noninc_history_pos < 0) - { - rl_ding (); - return 0; - } - - pos = noninc_search_from_pos (string, noninc_history_pos + dir, dir, flags, (int *)0); - if (pos == -1) - { - /* Search failed, current history position unchanged. */ - rl_maybe_unsave_line (); - rl_clear_message (); - rl_point = 0; - rl_ding (); - return 0; - } - - noninc_history_pos = pos; - - oldpos = where_history (); - history_set_pos (noninc_history_pos); - entry = current_history (); /* will never be NULL after successful search */ - -#if defined (VI_MODE) - if (rl_editing_mode != vi_mode) -#endif - history_set_pos (oldpos); - - make_history_line_current (entry); - - rl_point = 0; - rl_mark = rl_end; - - rl_clear_message (); - return 1; -} - -static _rl_search_cxt * -_rl_nsearch_init (int dir, int pchar) -{ - _rl_search_cxt *cxt; - char *p; - - cxt = _rl_scxt_alloc (RL_SEARCH_NSEARCH, 0); - if (dir < 0) - cxt->sflags |= SF_REVERSE; /* not strictly needed */ -#if defined (VI_MODE) - if (VI_COMMAND_MODE() && (pchar == '?' || pchar == '/')) - cxt->sflags |= SF_PATTERN; -#endif - - cxt->direction = dir; - cxt->history_pos = cxt->save_line; - - rl_maybe_save_line (); - - /* Clear the undo list, since reading the search string should create its - own undo list, and the whole list will end up being freed when we - finish reading the search string. */ - rl_undo_list = 0; - - /* Use the line buffer to read the search string. */ - rl_line_buffer[0] = 0; - rl_end = rl_point = 0; - - p = _rl_make_prompt_for_search (pchar ? pchar : ':'); - rl_message ("%s", p); - xfree (p); - - RL_SETSTATE(RL_STATE_NSEARCH); - - _rl_nscxt = cxt; - - return cxt; -} - -int -_rl_nsearch_cleanup (_rl_search_cxt *cxt, int r) -{ - _rl_scxt_dispose (cxt, 0); - _rl_nscxt = 0; - - RL_UNSETSTATE(RL_STATE_NSEARCH); - - return (r != 1); -} - -static void -_rl_nsearch_abort (_rl_search_cxt *cxt) -{ - rl_maybe_unsave_line (); - rl_clear_message (); - rl_point = cxt->save_point; - rl_mark = cxt->save_mark; - rl_restore_prompt (); - - RL_UNSETSTATE (RL_STATE_NSEARCH); -} - -/* Process just-read character C according to search context CXT. Return -1 - if the caller should abort the search, 0 if we should break out of the - loop, and 1 if we should continue to read characters. */ -static int -_rl_nsearch_dispatch (_rl_search_cxt *cxt, int c) -{ - if (c < 0) - c = CTRL ('C'); - - switch (c) - { - case CTRL('W'): - rl_unix_word_rubout (1, c); - break; - - case CTRL('U'): - rl_unix_line_discard (1, c); - break; - - case RETURN: - case NEWLINE: - return 0; - - case CTRL('H'): - case RUBOUT: - if (rl_point == 0) - { - _rl_nsearch_abort (cxt); - return -1; - } - _rl_rubout_char (1, c); - break; - - case CTRL('C'): - case CTRL('G'): - rl_ding (); - _rl_nsearch_abort (cxt); - return -1; - - default: -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_insert_text (cxt->mb); - else -#endif - _rl_insert_char (1, c); - break; - } - - (*rl_redisplay_function) (); - return 1; -} - -/* Perform one search according to CXT, using NONINC_SEARCH_STRING. Return - -1 if the search should be aborted, any other value means to clean up - using _rl_nsearch_cleanup (). Returns 1 if the search was successful, - 0 otherwise. */ -static int -_rl_nsearch_dosearch (_rl_search_cxt *cxt) -{ - rl_mark = cxt->save_mark; - - /* If rl_point == 0, we want to re-use the previous search string and - start from the saved history position. If there's no previous search - string, punt. */ - if (rl_point == 0) - { - if (noninc_search_string == 0) - { - rl_ding (); - rl_restore_prompt (); - RL_UNSETSTATE (RL_STATE_NSEARCH); - return -1; - } - } - else - { - /* We want to start the search from the current history position. */ - noninc_history_pos = cxt->save_line; - FREE (noninc_search_string); - noninc_search_string = savestring (rl_line_buffer); - - /* If we don't want the subsequent undo list generated by the search - matching a history line to include the contents of the search string, - we need to clear rl_line_buffer here. For now, we just clear the - undo list generated by reading the search string. (If the search - fails, the old undo list will be restored by rl_maybe_unsave_line.) */ - rl_free_undo_list (); - } - - rl_restore_prompt (); - return (noninc_dosearch (noninc_search_string, cxt->direction, cxt->sflags&SF_PATTERN)); -} - -/* Search non-interactively through the history list. DIR < 0 means to - search backwards through the history of previous commands; otherwise - the search is for commands subsequent to the current position in the - history list. PCHAR is the character to use for prompting when reading - the search string; if not specified (0), it defaults to `:'. */ -static int -noninc_search (int dir, int pchar) -{ - _rl_search_cxt *cxt; - int c, r; - - cxt = _rl_nsearch_init (dir, pchar); - - if (RL_ISSTATE (RL_STATE_CALLBACK)) - return (0); - - /* Read the search string. */ - r = 0; - while (1) - { - c = _rl_search_getchar (cxt); - - if (c < 0) - { - _rl_nsearch_abort (cxt); - return 1; - } - - if (c == 0) - break; - - r = _rl_nsearch_dispatch (cxt, c); - if (r < 0) - return 1; - else if (r == 0) - break; - } - - r = _rl_nsearch_dosearch (cxt); - return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1)); -} - -/* Search forward through the history list for a string. If the vi-mode - code calls this, KEY will be `?'. */ -int -rl_noninc_forward_search (int count, int key) -{ - return noninc_search (1, (key == '?') ? '?' : 0); -} - -/* Reverse search the history list for a string. If the vi-mode code - calls this, KEY will be `/'. */ -int -rl_noninc_reverse_search (int count, int key) -{ - return noninc_search (-1, (key == '/') ? '/' : 0); -} - -/* Search forward through the history list for the last string searched - for. If there is no saved search string, abort. If the vi-mode code - calls this, KEY will be `N'. */ -int -rl_noninc_forward_search_again (int count, int key) -{ - int r; - - if (!noninc_search_string) - { - rl_ding (); - return (1); - } -#if defined (VI_MODE) - if (VI_COMMAND_MODE() && key == 'N') - r = noninc_dosearch (noninc_search_string, 1, SF_PATTERN); - else -#endif - r = noninc_dosearch (noninc_search_string, 1, 0); - return (r != 1); -} - -/* Reverse search in the history list for the last string searched - for. If there is no saved search string, abort. If the vi-mode code - calls this, KEY will be `n'. */ -int -rl_noninc_reverse_search_again (int count, int key) -{ - int r; - - if (!noninc_search_string) - { - rl_ding (); - return (1); - } -#if defined (VI_MODE) - if (VI_COMMAND_MODE() && key == 'n') - r = noninc_dosearch (noninc_search_string, -1, SF_PATTERN); - else -#endif - r = noninc_dosearch (noninc_search_string, -1, 0); - return (r != 1); -} - -#if defined (READLINE_CALLBACKS) -int -_rl_nsearch_callback (_rl_search_cxt *cxt) -{ - int c, r; - - c = _rl_search_getchar (cxt); - if (c <= 0) - { - if (c < 0) - _rl_nsearch_abort (cxt); - return 1; - } - r = _rl_nsearch_dispatch (cxt, c); - if (r != 0) - return 1; - - r = _rl_nsearch_dosearch (cxt); - return ((r >= 0) ? _rl_nsearch_cleanup (cxt, r) : (r != 1)); -} -#endif - -static int -rl_history_search_internal (int count, int dir) -{ - HIST_ENTRY *temp; - int ret, oldpos, newcol; - char *t; - - rl_maybe_save_line (); - temp = (HIST_ENTRY *)NULL; - - /* Search COUNT times through the history for a line matching - history_search_string. If history_search_string[0] == '^', the - line must match from the start; otherwise any substring can match. - When this loop finishes, TEMP, if non-null, is the history line to - copy into the line buffer. */ - while (count) - { - RL_CHECK_SIGNALS (); - ret = noninc_search_from_pos (history_search_string, rl_history_search_pos + dir, dir, 0, &newcol); - if (ret == -1) - break; - - /* Get the history entry we found. */ - rl_history_search_pos = ret; - oldpos = where_history (); - history_set_pos (rl_history_search_pos); - temp = current_history (); /* will never be NULL after successful search */ - history_set_pos (oldpos); - - /* Don't find multiple instances of the same line. */ - if (prev_line_found && STREQ (prev_line_found, temp->line)) - continue; - prev_line_found = temp->line; - count--; - } - - /* If we didn't find anything at all, return. */ - if (temp == 0) - { - rl_maybe_unsave_line (); - rl_ding (); - /* If you don't want the saved history line (last match) to show up - in the line buffer after the search fails, change the #if 0 to - #if 1 */ -#if 0 - if (rl_point > rl_history_search_len) - { - rl_point = rl_end = rl_history_search_len; - rl_line_buffer[rl_end] = '\0'; - rl_mark = 0; - } -#else - rl_point = rl_history_search_len; /* rl_maybe_unsave_line changes it */ - rl_mark = rl_end; -#endif - return 1; - } - - /* Copy the line we found into the current line buffer. */ - make_history_line_current (temp); - - /* decide where to put rl_point -- need to change this for pattern search */ - if (rl_history_search_flags & ANCHORED_SEARCH) - rl_point = rl_history_search_len; /* easy case */ - else - { -#if 0 - t = strstr (rl_line_buffer, history_search_string); /* XXX */ - rl_point = t ? (int)(t - rl_line_buffer) + rl_history_search_len : rl_end; -#else - rl_point = (newcol >= 0) ? newcol : rl_end; -#endif - } - rl_mark = rl_end; - - return 0; -} - -static void -rl_history_search_reinit (int flags) -{ - int sind; - - rl_history_search_pos = where_history (); - rl_history_search_len = rl_point; - rl_history_search_flags = flags; - - prev_line_found = (char *)NULL; - if (rl_point) - { - /* Allocate enough space for anchored and non-anchored searches */ - if (rl_history_search_len >= history_string_size - 2) - { - history_string_size = rl_history_search_len + 2; - history_search_string = (char *)xrealloc (history_search_string, history_string_size); - } - sind = 0; - if (flags & ANCHORED_SEARCH) - history_search_string[sind++] = '^'; - strncpy (history_search_string + sind, rl_line_buffer, rl_point); - history_search_string[rl_point + sind] = '\0'; - } - _rl_free_saved_history_line (); -} - -/* Search forward in the history for the string of characters - from the start of the line to rl_point. This is a non-incremental - search. The search is anchored to the beginning of the history line. */ -int -rl_history_search_forward (int count, int ignore) -{ - if (count == 0) - return (0); - - if (rl_last_func != rl_history_search_forward && - rl_last_func != rl_history_search_backward) - rl_history_search_reinit (ANCHORED_SEARCH); - - if (rl_history_search_len == 0) - return (rl_get_next_history (count, ignore)); - return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1)); -} - -/* Search backward through the history for the string of characters - from the start of the line to rl_point. This is a non-incremental - search. */ -int -rl_history_search_backward (int count, int ignore) -{ - if (count == 0) - return (0); - - if (rl_last_func != rl_history_search_forward && - rl_last_func != rl_history_search_backward) - rl_history_search_reinit (ANCHORED_SEARCH); - - if (rl_history_search_len == 0) - return (rl_get_previous_history (count, ignore)); - return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1)); -} - -/* Search forward in the history for the string of characters - from the start of the line to rl_point. This is a non-incremental - search. The search succeeds if the search string is present anywhere - in the history line. */ -int -rl_history_substr_search_forward (int count, int ignore) -{ - if (count == 0) - return (0); - - if (rl_last_func != rl_history_substr_search_forward && - rl_last_func != rl_history_substr_search_backward) - rl_history_search_reinit (NON_ANCHORED_SEARCH); - - if (rl_history_search_len == 0) - return (rl_get_next_history (count, ignore)); - return (rl_history_search_internal (abs (count), (count > 0) ? 1 : -1)); -} - -/* Search backward through the history for the string of characters - from the start of the line to rl_point. This is a non-incremental - search. */ -int -rl_history_substr_search_backward (int count, int ignore) -{ - if (count == 0) - return (0); - - if (rl_last_func != rl_history_substr_search_forward && - rl_last_func != rl_history_substr_search_backward) - rl_history_search_reinit (NON_ANCHORED_SEARCH); - - if (rl_history_search_len == 0) - return (rl_get_previous_history (count, ignore)); - return (rl_history_search_internal (abs (count), (count > 0) ? -1 : 1)); -} diff --git a/readline/shell.c b/readline/shell.c deleted file mode 100644 index 7fe2e97c98..0000000000 --- a/readline/shell.c +++ /dev/null @@ -1,214 +0,0 @@ -/* shell.c -- readline utility functions that are normally provided by - bash when readline is linked as part of the shell. */ - -/* Copyright (C) 1997-2009,2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_STRING_H) -# include -#else -# include -#endif /* !HAVE_STRING_H */ - -#if defined (HAVE_LIMITS_H) -# include -#endif - -#if defined (HAVE_FCNTL_H) -#include -#endif -#if defined (HAVE_PWD_H) -#include -#endif - -#include - -#include "rlstdc.h" -#include "rlshell.h" -#include "rldefs.h" - -#include "xmalloc.h" - -#if defined (HAVE_GETPWUID) && !defined (HAVE_GETPW_DECLS) -extern struct passwd *getpwuid PARAMS((uid_t)); -#endif /* HAVE_GETPWUID && !HAVE_GETPW_DECLS */ - -#ifndef NULL -# define NULL 0 -#endif - -#ifndef CHAR_BIT -# define CHAR_BIT 8 -#endif - -/* Nonzero if the integer type T is signed. */ -#define TYPE_SIGNED(t) (! ((t) 0 < (t) -1)) - -/* Bound on length of the string representing an integer value of type T. - Subtract one for the sign bit if T is signed; - 302 / 1000 is log10 (2) rounded up; - add one for integer division truncation; - add one more for a minus sign if t is signed. */ -#define INT_STRLEN_BOUND(t) \ - ((sizeof (t) * CHAR_BIT - TYPE_SIGNED (t)) * 302 / 1000 \ - + 1 + TYPE_SIGNED (t)) - -/* All of these functions are resolved from bash if we are linking readline - as part of bash. */ - -/* Does shell-like quoting using single quotes. */ -char * -sh_single_quote (char *string) -{ - register int c; - char *result, *r, *s; - - result = (char *)xmalloc (3 + (4 * strlen (string))); - r = result; - *r++ = '\''; - - for (s = string; s && (c = *s); s++) - { - *r++ = c; - - if (c == '\'') - { - *r++ = '\\'; /* insert escaped single quote */ - *r++ = '\''; - *r++ = '\''; /* start new quoted string */ - } - } - - *r++ = '\''; - *r = '\0'; - - return (result); -} - -/* Set the environment variables LINES and COLUMNS to lines and cols, - respectively. */ -static char setenv_buf[INT_STRLEN_BOUND (int) + 1]; -static char putenv_buf1[INT_STRLEN_BOUND (int) + 6 + 1]; /* sizeof("LINES=") == 6 */ -static char putenv_buf2[INT_STRLEN_BOUND (int) + 8 + 1]; /* sizeof("COLUMNS=") == 8 */ - -void -sh_set_lines_and_columns (int lines, int cols) -{ -#if defined (HAVE_SETENV) - sprintf (setenv_buf, "%d", lines); - setenv ("LINES", setenv_buf, 1); - - sprintf (setenv_buf, "%d", cols); - setenv ("COLUMNS", setenv_buf, 1); -#else /* !HAVE_SETENV */ -# if defined (HAVE_PUTENV) - sprintf (putenv_buf1, "LINES=%d", lines); - putenv (putenv_buf1); - - sprintf (putenv_buf2, "COLUMNS=%d", cols); - putenv (putenv_buf2); -# endif /* HAVE_PUTENV */ -#endif /* !HAVE_SETENV */ -} - -char * -sh_get_env_value (const char *varname) -{ - return ((char *)getenv (varname)); -} - -char * -sh_get_home_dir (void) -{ - static char *home_dir = (char *)NULL; - struct passwd *entry; - - if (home_dir) - return (home_dir); - - home_dir = (char *)NULL; -#if defined (HAVE_GETPWUID) -# if defined (__TANDEM) - entry = getpwnam (getlogin ()); -# else - entry = getpwuid (getuid ()); -# endif - if (entry) - home_dir = savestring (entry->pw_dir); -#endif - -#if defined (HAVE_GETPWENT) - endpwent (); /* some systems need this */ -#endif - - return (home_dir); -} - -#if !defined (O_NDELAY) -# if defined (FNDELAY) -# define O_NDELAY FNDELAY -# endif -#endif - -int -sh_unset_nodelay_mode (int fd) -{ -#if defined (HAVE_FCNTL) - int flags, bflags; - - if ((flags = fcntl (fd, F_GETFL, 0)) < 0) - return -1; - - bflags = 0; - -#ifdef O_NONBLOCK - bflags |= O_NONBLOCK; -#endif - -#ifdef O_NDELAY - bflags |= O_NDELAY; -#endif - - if (flags & bflags) - { - flags &= ~bflags; - return (fcntl (fd, F_SETFL, flags)); - } -#endif - - return 0; -} diff --git a/readline/shlib/Makefile.in b/readline/shlib/Makefile.in deleted file mode 100644 index f2ec3e46b7..0000000000 --- a/readline/shlib/Makefile.in +++ /dev/null @@ -1,501 +0,0 @@ -## -*- text -*- ## -# Makefile for the GNU readline library shared library support. -# -# Copyright (C) 1998-2009 Free Software Foundation, Inc. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -PACKAGE = @PACKAGE_NAME@ -VERSION = @PACKAGE_VERSION@ - -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_VERSION = @PACKAGE_VERSION@ - -RL_LIBRARY_VERSION = @LIBVERSION@ -RL_LIBRARY_NAME = readline - -datarootdir = @datarootdir@ - -srcdir = @srcdir@ -VPATH = @top_srcdir@ -topdir = @top_srcdir@ -BUILD_DIR = @BUILD_DIR@ - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ - -CC = @CC@ -RANLIB = @RANLIB@ -AR = @AR@ -ARFLAGS = @ARFLAGS@ -RM = rm -f -CP = cp -MV = mv -LN = ln - -SHELL = @MAKE_SHELL@ - -host_os = @host_os@ -host_vendor = @host_vendor@ - -prefix = @prefix@ -exec_prefix = @exec_prefix@ -includedir = @includedir@ -bindir = @bindir@ -libdir = @libdir@ -datadir = @datadir@ -localedir = @localedir@ - -# Support an alternate destination root directory for package building -DESTDIR = - -CFLAGS = @CFLAGS@ -LOCAL_CFLAGS = @LOCAL_CFLAGS@ -DRL_LIBRARY_VERSION='"$(RL_LIBRARY_VERSION)"' -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ @LOCAL_LDFLAGS@ @CFLAGS@ - -DEFS = @DEFS@ @CROSS_COMPILE@ -LOCAL_DEFS = @LOCAL_DEFS@ - -# -# These values are generated for configure by ${topdir}/support/shobj-conf. -# If your system is not supported by that script, but includes facilities for -# dynamic loading of shared objects, please update the script and send the -# changes to bash-maintainers@gnu.org. -# -SHOBJ_CC = @SHOBJ_CC@ -SHOBJ_CFLAGS = @SHOBJ_CFLAGS@ -SHOBJ_LD = @SHOBJ_LD@ - -SHOBJ_LDFLAGS = @SHOBJ_LDFLAGS@ -SHOBJ_XLDFLAGS = @SHOBJ_XLDFLAGS@ -SHOBJ_LIBS = @SHOBJ_LIBS@ - -SHLIB_XLDFLAGS = @LDFLAGS@ @SHLIB_XLDFLAGS@ -SHLIB_LIBS = @SHLIB_LIBS@ - -SHLIB_DOT = @SHLIB_DOT@ -SHLIB_LIBPREF = @SHLIB_LIBPREF@ -SHLIB_LIBSUFF = @SHLIB_LIBSUFF@ - -SHLIB_LIBVERSION = @SHLIB_LIBVERSION@ -SHLIB_DLLVERSION = @SHLIB_DLLVERSION@ - -SHLIB_STATUS = @SHLIB_STATUS@ - -TERMCAP_LIB = @TERMCAP_LIB@ - -# shared library versioning -SHLIB_MAJOR= @SHLIB_MAJOR@ -# shared library systems like SVR4's do not use minor versions -SHLIB_MINOR= .@SHLIB_MINOR@ - -# For libraries which include headers from other libraries. -INCLUDES = -I. -I.. -I$(topdir) - -CCFLAGS = $(DEFS) $(LOCAL_DEFS) $(INCLUDES) $(CPPFLAGS) $(LOCAL_CFLAGS) $(CFLAGS) - -.SUFFIXES: .so - -.c.so: - ${RM} $@ - $(SHOBJ_CC) -c $(CCFLAGS) $(SHOBJ_CFLAGS) -o $*.o $< - $(MV) $*.o $@ - -# The name of the main library target. - -SHARED_READLINE = $(SHLIB_LIBPREF)readline$(SHLIB_DOT)$(SHLIB_LIBVERSION) -SHARED_HISTORY = $(SHLIB_LIBPREF)history$(SHLIB_DOT)$(SHLIB_LIBVERSION) -SHARED_LIBS = $(SHARED_READLINE) $(SHARED_HISTORY) - -# The C code source files for this library. -CSOURCES = $(topdir)/readline.c $(topdir)/funmap.c $(topdir)/keymaps.c \ - $(topdir)/vi_mode.c $(topdir)/parens.c $(topdir)/rltty.c \ - $(topdir)/complete.c $(topdir)/bind.c $(topdir)/isearch.c \ - $(topdir)/display.c $(topdir)/signals.c $(topdir)/emacs_keymap.c \ - $(topdir)/vi_keymap.c $(topdir)/util.c $(topdir)/kill.c \ - $(topdir)/undo.c $(topdir)/macro.c $(topdir)/input.c \ - $(topdir)/callback.c $(topdir)/terminal.c $(topdir)/xmalloc.c $(topdir)/xfree.c \ - $(topdir)/history.c $(topdir)/histsearch.c $(topdir)/histexpand.c \ - $(topdir)/histfile.c $(topdir)/nls.c $(topdir)/search.c \ - $(topdir)/shell.c $(topdir)/savestring.c $(topdir)/tilde.c \ - $(topdir)/text.c $(topdir)/misc.c $(topdir)/compat.c \ - $(topdir)/colors.c $(topdir)/parse-colors.c \ - $(topdir)/mbutil.c - -# The header files for this library. -HSOURCES = $(topdir)/readline.h $(topdir)/rldefs.h $(topdir)/chardefs.h \ - $(topdir)/keymaps.h $(topdir)/history.h $(topdir)/histlib.h \ - $(topdir)/posixstat.h $(topdir)/posixdir.h $(topdir)/posixjmp.h \ - $(topdir)/tilde.h $(topdir)/rlconf.h $(topdir)/rltty.h \ - $(topdir)/ansi_stdlib.h $(topdir)/tcap.h $(topdir)/rlstdc.h \ - $(topdir)/xmalloc.h $(topdir)/rlprivate.h $(topdir)/rlshell.h \ - $(topdir)/rltypedefs.h $(topdir)/rlmbutil.h \ - $(topdir)/colors.h $(topdir)/parse-colors.h - -SHARED_HISTOBJ = history.so histexpand.so histfile.so histsearch.so shell.so \ - mbutil.so -SHARED_TILDEOBJ = tilde.so -SHARED_COLORSOBJ = colors.so parse-colors.so -SHARED_OBJ = readline.so vi_mode.so funmap.so keymaps.so parens.so search.so \ - rltty.so complete.so bind.so isearch.so display.so signals.so \ - util.so kill.so undo.so macro.so input.so callback.so terminal.so \ - text.so nls.so misc.so \ - $(SHARED_HISTOBJ) $(SHARED_TILDEOBJ) $(SHARED_COLORSOBJ) \ - xmalloc.so xfree.so compat.so - -########################################################################## - -all: $(SHLIB_STATUS) - -supported: $(SHARED_LIBS) - -unsupported: - @echo "Your system and compiler (${host_os}-${CC}) are not supported by the" - @echo "${topdir}/support/shobj-conf script." - @echo "If your operating system provides facilities for creating" - @echo "shared libraries, please update the script and re-run configure." - @echo "Please send the changes you made to bash-maintainers@gnu.org" - @echo "for inclusion in future bash and readline releases." - -$(SHARED_READLINE): $(SHARED_OBJ) - $(RM) $@ - $(SHOBJ_LD) ${SHOBJ_LDFLAGS} ${SHLIB_XLDFLAGS} -o $@ $(SHARED_OBJ) $(SHLIB_LIBS) - -$(SHARED_HISTORY): $(SHARED_HISTOBJ) xmalloc.so xfree.so - $(RM) $@ - $(SHOBJ_LD) ${SHOBJ_LDFLAGS} ${SHLIB_XLDFLAGS} -o $@ $(SHARED_HISTOBJ) xmalloc.so xfree.so $(SHLIB_LIBS) - -# Since tilde.c is shared between readline and bash, make sure we compile -# it with the right flags when it's built as part of readline -tilde.so: tilde.c - ${RM} $@ - $(SHOBJ_CC) -c $(CCFLAGS) $(SHOBJ_CFLAGS) -DREADLINE_LIBRARY -c -o tilde.o $(topdir)/tilde.c - $(MV) tilde.o $@ - -installdirs: $(topdir)/support/mkdirs - -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(libdir) - -$(SHELL) $(topdir)/support/mkdirs $(DESTDIR)$(bindir) - -install-supported: installdirs $(SHLIB_STATUS) - $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -i "$(INSTALL_DATA)" $(SHARED_HISTORY) - $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -i "$(INSTALL_DATA)" $(SHARED_READLINE) - @echo install: you may need to run ldconfig - -install-unsupported: - @echo install: shared libraries not supported - -install: install-$(SHLIB_STATUS) - -uninstall-supported: - $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -U $(SHARED_HISTORY) - $(SHELL) $(topdir)/support/shlib-install -O $(host_os) -V $(host_vendor) -d $(DESTDIR)$(libdir) -b $(DESTDIR)$(bindir) -U $(SHARED_READLINE) - @echo uninstall: you may need to run ldconfig - -uninstall-unsupported: - @echo uninstall: shared libraries not supported - -uninstall: uninstall-$(SHLIB_STATUS) - -clean mostlyclean: force - $(RM) $(SHARED_OBJ) $(SHARED_LIBS) - -distclean maintainer-clean: clean - $(RM) Makefile - -force: - -# Tell versions [3.59,3.63) of GNU make not to export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: - -# Dependencies -bind.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h -bind.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -bind.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -bind.so: $(topdir)/rltypedefs.h -bind.so: $(topdir)/tilde.h $(topdir)/history.h -compat.so: ${BUILD_DIR}/config.h -compat.so: $(topdir)/rlstdc.h $(topdir)/rltypedefs.h -callback.so: $(topdir)/rlconf.h -callback.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h -callback.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -callback.so: $(topdir)/rltypedefs.h -callback.so: $(topdir)/tilde.h -complete.so: $(topdir)/ansi_stdlib.h $(topdir)/posixdir.h $(topdir)/posixstat.h -complete.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -complete.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -complete.so: $(topdir)/rltypedefs.h -complete.so: $(topdir)/tilde.h -display.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h -display.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -display.so: $(topdir)/tcap.h -display.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -display.so: $(topdir)/rltypedefs.h -display.so: $(topdir)/tilde.h $(topdir)/history.h -funmap.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -funmap.so: $(topdir)/rltypedefs.h -funmap.so: $(topdir)/rlconf.h $(topdir)/ansi_stdlib.h -funmap.so: ${BUILD_DIR}/config.h $(topdir)/tilde.h -histexpand.so: $(topdir)/ansi_stdlib.h -histexpand.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h -histexpand.so: ${BUILD_DIR}/config.h -histfile.so: $(topdir)/ansi_stdlib.h -histfile.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h -histfile.so: ${BUILD_DIR}/config.h -history.so: $(topdir)/ansi_stdlib.h -history.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h -history.so: ${BUILD_DIR}/config.h -histsearch.so: $(topdir)/ansi_stdlib.h -histsearch.so: $(topdir)/history.h $(topdir)/histlib.h $(topdir)/rltypedefs.h -histsearch.so: ${BUILD_DIR}/config.h -input.so: $(topdir)/ansi_stdlib.h -input.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -input.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -input.so: $(topdir)/rltypedefs.h -input.so: $(topdir)/tilde.h -isearch.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -isearch.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -isearch.so: $(topdir)/rltypedefs.h -isearch.so: $(topdir)/ansi_stdlib.h $(topdir)/history.h $(topdir)/tilde.h -keymaps.so: $(topdir)/keymaps.h $(topdir)/chardefs.h $(topdir)/rlconf.h -keymaps.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -keymaps.so: $(topdir)/rltypedefs.h -keymaps.so: ${BUILD_DIR}/config.h $(topdir)/ansi_stdlib.h $(topdir)/tilde.h -kill.so: $(topdir)/ansi_stdlib.h -kill.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -kill.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -kill.so: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rltypedefs.h -macro.so: $(topdir)/ansi_stdlib.h -macro.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -macro.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -macro.so: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rltypedefs.h -mbutil.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -mbutil.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h -mbutil.so: $(topdir)/chardefs.h $(topdir)/rlstdc.h -misc.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -misc.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -misc.so: $(topdir)/rltypedefs.h -misc.so: $(topdir)/history.h $(topdir)/tilde.h $(topdir)/ansi_stdlib.h -nls.so: $(topdir)/ansi_stdlib.h -nls.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -nls.o: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -nls.o: $(topdir)/rltypedefs.h -nls.o: $(topdir)/tilde.h $(topdir)/history.h $(topdir)/rlstdc.h -parens.so: $(topdir)/rlconf.h ${BUILD_DIR}/config.h -parens.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -parens.so: $(topdir)/rltypedefs.h -parens.so: $(topdir)/tilde.h -rltty.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -rltty.so: $(topdir)/rltty.h $(topdir)/tilde.h -rltty.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -rltty.so: $(topdir)/rltypedefs.h -savestring.so: ${BUILD_DIR}/config.h -search.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -search.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -search.so: $(topdir)/ansi_stdlib.h $(topdir)/history.h $(topdir)/tilde.h -search.so: $(topdir)/rltypedefs.h -signals.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -signals.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -signals.so: $(topdir)/history.h $(topdir)/tilde.h -signals.so: $(topdir)/rltypedefs.h -terminal.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -terminal.so: $(topdir)/tcap.h -terminal.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -terminal.so: $(topdir)/tilde.h $(topdir)/history.h -terminal.so: $(topdir)/rltypedefs.h -text.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -text.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -text.so: $(topdir)/rltypedefs.h -text.so: $(topdir)/history.h $(topdir)/tilde.h $(topdir)/ansi_stdlib.h -tilde.so: $(topdir)/ansi_stdlib.h ${BUILD_DIR}/config.h $(topdir)/tilde.h -undo.so: $(topdir)/ansi_stdlib.h -undo.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -undo.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -undo.so: $(topdir)/rltypedefs.h -undo.so: $(topdir)/tilde.h $(topdir)/history.h -util.so: $(topdir)/posixjmp.h $(topdir)/ansi_stdlib.h -util.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -util.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -util.so: $(topdir)/rltypedefs.h $(topdir)/tilde.h -vi_mode.so: $(topdir)/rldefs.h ${BUILD_DIR}/config.h $(topdir)/rlconf.h -vi_mode.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/chardefs.h -vi_mode.so: $(topdir)/history.h $(topdir)/ansi_stdlib.h $(topdir)/tilde.h -vi_mode.so: $(topdir)/rltypedefs.h -xfree.so: ${BUILD_DIR}/config.h -xfree.so: $(topdir)/ansi_stdlib.h -xmalloc.so: ${BUILD_DIR}/config.h -xmalloc.so: $(topdir)/ansi_stdlib.h - -bind.so: $(topdir)/rlshell.h -histfile.so: $(topdir)/rlshell.h -nls.so: $(topdir)/rlshell.h -readline.so: $(topdir)/rlshell.h -shell.so: $(topdir)/rlshell.h -terminal.so: $(topdir)/rlshell.h -histexpand.so: $(topdir)/rlshell.h - -colors.so: $(BUILD_DIR)/config.h $(topdir)/colors.h -colors.so: $(topdir)/rlconf.h -colors.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h -colors.so: $(topdir)/chardefs.h $(topdir)/tilde.h $(topdir)/rlstdc.h -colors.so: $(topdir)/ansi_stdlib.h $(topdir)/posixstat.h -parse-colors.so: $(BUILD_DIR)/config.h $(topdir)/colors.h $(topdir)/parse-colors.h -parse-colors.so: $(topdir)/rldefs.h $(topdir)/rlconf.h -parse-colors.so: $(topdir)/readline.h $(topdir)/keymaps.h $(topdir)/rltypedefs.h -parse-colors.so: $(topdir)/chardefs.h $(topdir)/tilde.h $(topdir)/rlstdc.h - -bind.so: $(topdir)/rlprivate.h -callback.so: $(topdir)/rlprivate.h -complete.so: $(topdir)/rlprivate.h -display.so: $(topdir)/rlprivate.h -input.so: $(topdir)/rlprivate.h -isearch.so: $(topdir)/rlprivate.h -kill.so: $(topdir)/rlprivate.h -macro.so: $(topdir)/rlprivate.h -mbutil.so: $(topdir)/rlprivate.h -misc.so: $(topdir)/rlprivate.h -nls.so: $(topdir)/rlprivate.h -parens.so: $(topdir)/rlprivate.h -readline.so: $(topdir)/rlprivate.h -rltty.so: $(topdir)/rlprivate.h -search.so: $(topdir)/rlprivate.h -signals.so: $(topdir)/rlprivate.h -terminal.so: $(topdir)/rlprivate.h -text.so: $(topdir)/rlprivate.h -undo.so: $(topdir)/rlprivate.h -util.so: $(topdir)/rlprivate.h -vi_mode.so: $(topdir)/rlprivate.h -colors.so: $(topdir)/rlprivate.h -parse-colors.so: $(topdir)/rlprivate.h - -bind.so: $(topdir)/xmalloc.h -callback.so: $(topdir)/xmalloc.h -complete.so: $(topdir)/xmalloc.h -display.so: $(topdir)/xmalloc.h -funmap.so: $(topdir)/xmalloc.h -histexpand.so: $(topdir)/xmalloc.h -histfile.so: $(topdir)/xmalloc.h -history.so: $(topdir)/xmalloc.h -input.so: $(topdir)/xmalloc.h -isearch.so: $(topdir)/xmalloc.h -keymaps.so: $(topdir)/xmalloc.h -kill.so: $(topdir)/xmalloc.h -macro.so: $(topdir)/xmalloc.h -mbutil.so: $(topdir)/xmalloc.h -misc.so: $(topdir)/xmalloc.h -readline.so: $(topdir)/xmalloc.h -savestring.so: $(topdir)/xmalloc.h -search.so: $(topdir)/xmalloc.h -shell.so: $(topdir)/xmalloc.h -terminal.so: $(topdir)/xmalloc.h -text.so: $(topdir)/xmalloc.h -tilde.so: $(topdir)/xmalloc.h -undo.so: $(topdir)/xmalloc.h -util.so: $(topdir)/xmalloc.h -vi_mode.so: $(topdir)/xmalloc.h -xfree.so: $(topdir)/xmalloc.h -xmalloc.so: $(topdir)/xmalloc.h -colors.so: $(topdir)/xmalloc.h -parse-colors.so: $(topdir)/xmalloc.h - -complete.so: $(topdir)/rlmbutil.h -display.so: $(topdir)/rlmbutil.h -histexpand.so: $(topdir)/rlmbutil.h -input.so: $(topdir)/rlmbutil.h -isearch.so: $(topdir)/rlmbutil.h -mbutil.so: $(topdir)/rlmbutil.h -misc.so: $(topdir)/rlmbutil.h -readline.so: $(topdir)/rlmbutil.h -search.so: $(topdir)/rlmbutil.h -text.so: $(topdir)/rlmbutil.h -vi_mode.so: $(topdir)/rlmbutil.h -colors.so: $(topdir)/rlmbutil.h -parse-colors.so: $(topdir)/rlmbutil.h - -bind.so: $(topdir)/bind.c -callback.so: $(topdir)/callback.c -compat.so: $(topdir)/compat.c -complete.so: $(topdir)/complete.c -display.so: $(topdir)/display.c -funmap.so: $(topdir)/funmap.c -input.so: $(topdir)/input.c -isearch.so: $(topdir)/isearch.c -keymaps.so: $(topdir)/keymaps.c $(topdir)/emacs_keymap.c $(topdir)/vi_keymap.c -kill.so: $(topdir)/kill.c -macro.so: $(topdir)/macro.c -mbutil.so: $(topdir)/mbutil.c -misc.so: $(topdir)/mbutil.c -nls.so: $(topdir)/nls.c -parens.so: $(topdir)/parens.c -readline.so: $(topdir)/readline.c -rltty.so: $(topdir)/rltty.c -savestring.so: $(topdir)/savestring.c -search.so: $(topdir)/search.c -shell.so: $(topdir)/shell.c -signals.so: $(topdir)/signals.c -terminal.so: $(topdir)/terminal.c -text.so: $(topdir)/text.c -tilde.so: $(topdir)/tilde.c -undo.so: $(topdir)/undo.c -util.so: $(topdir)/util.c -vi_mode.so: $(topdir)/vi_mode.c -xfree.so: $(topdir)/xfree.c -xmalloc.so: $(topdir)/xmalloc.c - -histexpand.so: $(topdir)/histexpand.c -histfile.so: $(topdir)/histfile.c -history.so: $(topdir)/history.c -histsearch.so: $(topdir)/histsearch.c - -bind.so: bind.c -callback.so: callback.c -comapt.so: compat.c -complete.so: complete.c -display.so: display.c -funmap.so: funmap.c -input.so: input.c -isearch.so: isearch.c -keymaps.so: keymaps.c emacs_keymap.c vi_keymap.c -kill.so: kill.c -macro.so: macro.c -mbutil.so: mbutil.c -misc.so: misc.c -nls.so: nls.c -parens.so: parens.c -readline.so: readline.c -rltty.so: rltty.c -savestring.so: savestring.c -search.so: search.c -signals.so: signals.c -shell.so: shell.c -terminal.so: terminal.c -text.so: text.c -tilde.so: tilde.c -undo.so: undo.c -util.so: util.c -vi_mode.so: vi_mode.c -xfree.so: xfree.c -xmalloc.so: xmalloc.c - -colors.so: colors.c -parse-colors.so: parse-colors.c - -histexpand.so: histexpand.c -histfile.so: histfile.c -history.so: history.c -histsearch.so: histsearch.c diff --git a/readline/signals.c b/readline/signals.c deleted file mode 100644 index 76c5c47330..0000000000 --- a/readline/signals.c +++ /dev/null @@ -1,742 +0,0 @@ -/* signals.c -- signal handling support for readline. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include /* Just for NULL. Yuck. */ -#include -#include - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -#if defined (GWINSZ_IN_SYS_IOCTL) -# include -#endif /* GWINSZ_IN_SYS_IOCTL */ - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" - -#if defined (HANDLE_SIGNALS) - -#if !defined (RETSIGTYPE) -# if defined (VOID_SIGHANDLER) -# define RETSIGTYPE void -# else -# define RETSIGTYPE int -# endif /* !VOID_SIGHANDLER */ -#endif /* !RETSIGTYPE */ - -#if defined (VOID_SIGHANDLER) -# define SIGHANDLER_RETURN return -#else -# define SIGHANDLER_RETURN return (0) -#endif - -/* This typedef is equivalent to the one for Function; it allows us - to say SigHandler *foo = signal (SIGKILL, SIG_IGN); */ -typedef RETSIGTYPE SigHandler (); - -#if defined (HAVE_POSIX_SIGNALS) -typedef struct sigaction sighandler_cxt; -# define rl_sigaction(s, nh, oh) sigaction(s, nh, oh) -#else -typedef struct { SigHandler *sa_handler; int sa_mask, sa_flags; } sighandler_cxt; -# define sigemptyset(m) -#endif /* !HAVE_POSIX_SIGNALS */ - -#ifndef SA_RESTART -# define SA_RESTART 0 -#endif - -static SigHandler *rl_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *)); -static void rl_maybe_set_sighandler PARAMS((int, SigHandler *, sighandler_cxt *)); -static void rl_maybe_restore_sighandler PARAMS((int, sighandler_cxt *)); - -static RETSIGTYPE rl_signal_handler PARAMS((int)); -static RETSIGTYPE _rl_handle_signal PARAMS((int)); - -/* Exported variables for use by applications. */ - -/* If non-zero, readline will install its own signal handlers for - SIGINT, SIGTERM, SIGHUP, SIGQUIT, SIGALRM, SIGTSTP, SIGTTIN, and SIGTTOU. */ -int rl_catch_signals = 1; - -/* If non-zero, readline will install a signal handler for SIGWINCH. */ -#ifdef SIGWINCH -int rl_catch_sigwinch = 1; -#else -int rl_catch_sigwinch = 0; /* for the readline state struct in readline.c */ -#endif - -/* Private variables. */ -int _rl_interrupt_immediately = 0; -int volatile _rl_caught_signal = 0; /* should be sig_atomic_t, but that requires including everywhere */ - -/* If non-zero, print characters corresponding to received signals as long as - the user has indicated his desire to do so (_rl_echo_control_chars). */ -int _rl_echoctl = 0; - -int _rl_intr_char = 0; -int _rl_quit_char = 0; -int _rl_susp_char = 0; - -static int signals_set_flag; -static int sigwinch_set_flag; - -#if defined (HAVE_POSIX_SIGNALS) -sigset_t _rl_orig_sigset; -#endif /* !HAVE_POSIX_SIGNALS */ - -/* **************************************************************** */ -/* */ -/* Signal Handling */ -/* */ -/* **************************************************************** */ - -static sighandler_cxt old_int, old_term, old_hup, old_alrm, old_quit; -#if defined (SIGTSTP) -static sighandler_cxt old_tstp, old_ttou, old_ttin; -#endif -#if defined (SIGWINCH) -static sighandler_cxt old_winch; -#endif - -_rl_sigcleanup_func_t *_rl_sigcleanup; -void *_rl_sigcleanarg; - -/* Readline signal handler functions. */ - -/* Called from RL_CHECK_SIGNALS() macro */ -RETSIGTYPE -_rl_signal_handler (int sig) -{ - _rl_caught_signal = 0; /* XXX */ - -#if defined (SIGWINCH) - if (sig == SIGWINCH) - { - rl_resize_terminal (); - /* XXX - experimental for now */ - /* Call a signal hook because though we called the original signal handler - in rl_sigwinch_handler below, we will not resend the signal to - ourselves. */ - if (rl_signal_event_hook) - (*rl_signal_event_hook) (); - } - else -#endif - _rl_handle_signal (sig); - - SIGHANDLER_RETURN; -} - -static RETSIGTYPE -rl_signal_handler (int sig) -{ - if (_rl_interrupt_immediately) - { - _rl_interrupt_immediately = 0; - _rl_handle_signal (sig); - } - else - _rl_caught_signal = sig; - - SIGHANDLER_RETURN; -} - -static RETSIGTYPE -_rl_handle_signal (int sig) -{ -#if defined (HAVE_POSIX_SIGNALS) - sigset_t set; -#else /* !HAVE_POSIX_SIGNALS */ -# if defined (HAVE_BSD_SIGNALS) - long omask; -# else /* !HAVE_BSD_SIGNALS */ - sighandler_cxt dummy_cxt; /* needed for rl_set_sighandler call */ -# endif /* !HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - - RL_SETSTATE(RL_STATE_SIGHANDLER); - -#if !defined (HAVE_BSD_SIGNALS) && !defined (HAVE_POSIX_SIGNALS) - /* Since the signal will not be blocked while we are in the signal - handler, ignore it until rl_clear_signals resets the catcher. */ -# if defined (SIGALRM) - if (sig == SIGINT || sig == SIGALRM) -# else - if (sig == SIGINT) -# endif - rl_set_sighandler (sig, SIG_IGN, &dummy_cxt); -#endif /* !HAVE_BSD_SIGNALS && !HAVE_POSIX_SIGNALS */ - - /* If there's a sig cleanup function registered, call it and `deregister' - the cleanup function to avoid multiple calls */ - if (_rl_sigcleanup) - { - (*_rl_sigcleanup) (sig, _rl_sigcleanarg); - _rl_sigcleanup = 0; - _rl_sigcleanarg = 0; - } - - switch (sig) - { - case SIGINT: - _rl_reset_completion_state (); - rl_free_line_state (); -#if defined (READLINE_CALLBACKS) - rl_callback_sigcleanup (); -#endif - - /* FALLTHROUGH */ - -#if defined (SIGTSTP) - case SIGTSTP: - case SIGTTIN: -# if defined (HAVE_POSIX_SIGNALS) - /* Block SIGTTOU so we can restore the terminal settings to something - sane without stopping on SIGTTOU if we have been placed into the - background. Even trying to get the current terminal pgrp with - tcgetpgrp() will generate SIGTTOU, so we don't bother. Don't bother - doing this if we've been stopped on SIGTTOU; it's aready too late. */ - sigemptyset (&set); - sigaddset (&set, SIGTTOU); - sigprocmask (SIG_BLOCK, &set, (sigset_t *)NULL); -# endif - case SIGTTOU: -#endif /* SIGTSTP */ - case SIGTERM: -#if defined (SIGHUP) - case SIGHUP: -#endif -#if defined (SIGALRM) - case SIGALRM: -#endif -#if defined (SIGQUIT) - case SIGQUIT: -#endif - rl_echo_signal_char (sig); - rl_cleanup_after_signal (); - -#if defined (HAVE_POSIX_SIGNALS) -# if defined (SIGTSTP) - /* Unblock SIGTTOU blocked above */ - if (sig == SIGTTIN || sig == SIGTSTP) - sigprocmask (SIG_UNBLOCK, &set, (sigset_t *)NULL); -# endif - - sigemptyset (&set); - sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &set); - sigdelset (&set, sig); -#else /* !HAVE_POSIX_SIGNALS */ -# if defined (HAVE_BSD_SIGNALS) - omask = sigblock (0); -# endif /* HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - -#if defined (__EMX__) - signal (sig, SIG_ACK); -#endif - -#if defined (HAVE_KILL) - kill (getpid (), sig); -#else - raise (sig); /* assume we have raise */ -#endif - - /* Let the signal that we just sent through. */ -#if defined (HAVE_POSIX_SIGNALS) - sigprocmask (SIG_SETMASK, &set, (sigset_t *)NULL); -#else /* !HAVE_POSIX_SIGNALS */ -# if defined (HAVE_BSD_SIGNALS) - sigsetmask (omask & ~(sigmask (sig))); -# endif /* HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - - rl_reset_after_signal (); - } - - RL_UNSETSTATE(RL_STATE_SIGHANDLER); - SIGHANDLER_RETURN; -} - -#if defined (SIGWINCH) -static RETSIGTYPE -rl_sigwinch_handler (int sig) -{ - SigHandler *oh; - -#if defined (MUST_REINSTALL_SIGHANDLERS) - sighandler_cxt dummy_winch; - - /* We don't want to change old_winch -- it holds the state of SIGWINCH - disposition set by the calling application. We need this state - because we call the application's SIGWINCH handler after updating - our own idea of the screen size. */ - rl_set_sighandler (SIGWINCH, rl_sigwinch_handler, &dummy_winch); -#endif - - RL_SETSTATE(RL_STATE_SIGHANDLER); - _rl_caught_signal = sig; - - /* If another sigwinch handler has been installed, call it. */ - oh = (SigHandler *)old_winch.sa_handler; - if (oh && oh != (SigHandler *)SIG_IGN && oh != (SigHandler *)SIG_DFL) - (*oh) (sig); - - RL_UNSETSTATE(RL_STATE_SIGHANDLER); - SIGHANDLER_RETURN; -} -#endif /* SIGWINCH */ - -/* Functions to manage signal handling. */ - -#if !defined (HAVE_POSIX_SIGNALS) -static int -rl_sigaction (int sig, sighandler_cxt *nh, sighandler_cxt *oh) -{ - oh->sa_handler = signal (sig, nh->sa_handler); - return 0; -} -#endif /* !HAVE_POSIX_SIGNALS */ - -/* Set up a readline-specific signal handler, saving the old signal - information in OHANDLER. Return the old signal handler, like - signal(). */ -static SigHandler * -rl_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler) -{ - sighandler_cxt old_handler; -#if defined (HAVE_POSIX_SIGNALS) - struct sigaction act; - - act.sa_handler = handler; -# if defined (SIGWINCH) - act.sa_flags = (sig == SIGWINCH) ? SA_RESTART : 0; -# else - act.sa_flags = 0; -# endif /* SIGWINCH */ - sigemptyset (&act.sa_mask); - sigemptyset (&ohandler->sa_mask); - sigaction (sig, &act, &old_handler); -#else - old_handler.sa_handler = (SigHandler *)signal (sig, handler); -#endif /* !HAVE_POSIX_SIGNALS */ - - /* XXX -- assume we have memcpy */ - /* If rl_set_signals is called twice in a row, don't set the old handler to - rl_signal_handler, because that would cause infinite recursion. */ - if (handler != rl_signal_handler || old_handler.sa_handler != rl_signal_handler) - memcpy (ohandler, &old_handler, sizeof (sighandler_cxt)); - - return (ohandler->sa_handler); -} - -/* Set disposition of SIG to HANDLER, returning old state in OHANDLER. Don't - change disposition if OHANDLER indicates the signal was ignored. */ -static void -rl_maybe_set_sighandler (int sig, SigHandler *handler, sighandler_cxt *ohandler) -{ - sighandler_cxt dummy; - SigHandler *oh; - - sigemptyset (&dummy.sa_mask); - dummy.sa_flags = 0; - oh = rl_set_sighandler (sig, handler, ohandler); - if (oh == (SigHandler *)SIG_IGN) - rl_sigaction (sig, ohandler, &dummy); -} - -/* Set the disposition of SIG to HANDLER, if HANDLER->sa_handler indicates the - signal was not being ignored. MUST only be called for signals whose - disposition was changed using rl_maybe_set_sighandler or for which the - SIG_IGN check was performed inline (e.g., SIGALRM below). */ -static void -rl_maybe_restore_sighandler (int sig, sighandler_cxt *handler) -{ - sighandler_cxt dummy; - - sigemptyset (&dummy.sa_mask); - dummy.sa_flags = 0; - if (handler->sa_handler != SIG_IGN) - rl_sigaction (sig, handler, &dummy); -} - -int -rl_set_signals (void) -{ - sighandler_cxt dummy; - SigHandler *oh; -#if defined (HAVE_POSIX_SIGNALS) - static int sigmask_set = 0; - static sigset_t bset, oset; -#endif - -#if defined (HAVE_POSIX_SIGNALS) - if (rl_catch_signals && sigmask_set == 0) - { - sigemptyset (&bset); - - sigaddset (&bset, SIGINT); - sigaddset (&bset, SIGTERM); -#if defined (SIGHUP) - sigaddset (&bset, SIGHUP); -#endif -#if defined (SIGQUIT) - sigaddset (&bset, SIGQUIT); -#endif -#if defined (SIGALRM) - sigaddset (&bset, SIGALRM); -#endif -#if defined (SIGTSTP) - sigaddset (&bset, SIGTSTP); -#endif -#if defined (SIGTTIN) - sigaddset (&bset, SIGTTIN); -#endif -#if defined (SIGTTOU) - sigaddset (&bset, SIGTTOU); -#endif - sigmask_set = 1; - } -#endif /* HAVE_POSIX_SIGNALS */ - - if (rl_catch_signals && signals_set_flag == 0) - { -#if defined (HAVE_POSIX_SIGNALS) - sigemptyset (&_rl_orig_sigset); - sigprocmask (SIG_BLOCK, &bset, &_rl_orig_sigset); -#endif - - rl_maybe_set_sighandler (SIGINT, rl_signal_handler, &old_int); - rl_maybe_set_sighandler (SIGTERM, rl_signal_handler, &old_term); -#if defined (SIGHUP) - rl_maybe_set_sighandler (SIGHUP, rl_signal_handler, &old_hup); -#endif -#if defined (SIGQUIT) - rl_maybe_set_sighandler (SIGQUIT, rl_signal_handler, &old_quit); -#endif - -#if defined (SIGALRM) - oh = rl_set_sighandler (SIGALRM, rl_signal_handler, &old_alrm); - if (oh == (SigHandler *)SIG_IGN) - rl_sigaction (SIGALRM, &old_alrm, &dummy); -#if defined (HAVE_POSIX_SIGNALS) && defined (SA_RESTART) - /* If the application using readline has already installed a signal - handler with SA_RESTART, SIGALRM will cause reads to be restarted - automatically, so readline should just get out of the way. Since - we tested for SIG_IGN above, we can just test for SIG_DFL here. */ - if (oh != (SigHandler *)SIG_DFL && (old_alrm.sa_flags & SA_RESTART)) - rl_sigaction (SIGALRM, &old_alrm, &dummy); -#endif /* HAVE_POSIX_SIGNALS */ -#endif /* SIGALRM */ - -#if defined (SIGTSTP) - rl_maybe_set_sighandler (SIGTSTP, rl_signal_handler, &old_tstp); -#endif /* SIGTSTP */ - -#if defined (SIGTTOU) - rl_maybe_set_sighandler (SIGTTOU, rl_signal_handler, &old_ttou); -#endif /* SIGTTOU */ - -#if defined (SIGTTIN) - rl_maybe_set_sighandler (SIGTTIN, rl_signal_handler, &old_ttin); -#endif /* SIGTTIN */ - - signals_set_flag = 1; - -#if defined (HAVE_POSIX_SIGNALS) - sigprocmask (SIG_SETMASK, &_rl_orig_sigset, (sigset_t *)NULL); -#endif - } - else if (rl_catch_signals == 0) - { -#if defined (HAVE_POSIX_SIGNALS) - sigemptyset (&_rl_orig_sigset); - sigprocmask (SIG_BLOCK, (sigset_t *)NULL, &_rl_orig_sigset); -#endif - } - -#if defined (SIGWINCH) - if (rl_catch_sigwinch && sigwinch_set_flag == 0) - { - rl_maybe_set_sighandler (SIGWINCH, rl_sigwinch_handler, &old_winch); - sigwinch_set_flag = 1; - } -#endif /* SIGWINCH */ - - return 0; -} - -int -rl_clear_signals (void) -{ - sighandler_cxt dummy; - - if (rl_catch_signals && signals_set_flag == 1) - { - /* Since rl_maybe_set_sighandler doesn't override a SIG_IGN handler, - we should in theory not have to restore a handler where - old_xxx.sa_handler == SIG_IGN. That's what rl_maybe_restore_sighandler - does. Fewer system calls should reduce readline's per-line - overhead */ - rl_maybe_restore_sighandler (SIGINT, &old_int); - rl_maybe_restore_sighandler (SIGTERM, &old_term); -#if defined (SIGHUP) - rl_maybe_restore_sighandler (SIGHUP, &old_hup); -#endif -#if defined (SIGQUIT) - rl_maybe_restore_sighandler (SIGQUIT, &old_quit); -#endif -#if defined (SIGALRM) - rl_maybe_restore_sighandler (SIGALRM, &old_alrm); -#endif - -#if defined (SIGTSTP) - rl_maybe_restore_sighandler (SIGTSTP, &old_tstp); -#endif /* SIGTSTP */ - -#if defined (SIGTTOU) - rl_maybe_restore_sighandler (SIGTTOU, &old_ttou); -#endif /* SIGTTOU */ - -#if defined (SIGTTIN) - rl_maybe_restore_sighandler (SIGTTIN, &old_ttin); -#endif /* SIGTTIN */ - - signals_set_flag = 0; - } - -#if defined (SIGWINCH) - if (rl_catch_sigwinch && sigwinch_set_flag == 1) - { - sigemptyset (&dummy.sa_mask); - rl_sigaction (SIGWINCH, &old_winch, &dummy); - sigwinch_set_flag = 0; - } -#endif - - return 0; -} - -/* Clean up the terminal and readline state after catching a signal, before - resending it to the calling application. */ -void -rl_cleanup_after_signal (void) -{ - _rl_clean_up_for_exit (); - if (rl_deprep_term_function) - (*rl_deprep_term_function) (); - rl_clear_pending_input (); - rl_clear_signals (); -} - -/* Reset the terminal and readline state after a signal handler returns. */ -void -rl_reset_after_signal (void) -{ - if (rl_prep_term_function) - (*rl_prep_term_function) (_rl_meta_flag); - rl_set_signals (); -} - -/* Free up the readline variable line state for the current line (undo list, - any partial history entry, any keyboard macros in progress, and any - numeric arguments in process) after catching a signal, before calling - rl_cleanup_after_signal(). */ -void -rl_free_line_state (void) -{ - register HIST_ENTRY *entry; - - rl_free_undo_list (); - - entry = current_history (); - if (entry) - entry->data = (char *)NULL; - - _rl_kill_kbd_macro (); - rl_clear_message (); - _rl_reset_argument (); -} - -int -rl_pending_signal (void) -{ - return (_rl_caught_signal); -} - -void -rl_check_signals (void) -{ - RL_CHECK_SIGNALS (); -} -#endif /* HANDLE_SIGNALS */ - -/* **************************************************************** */ -/* */ -/* SIGINT Management */ -/* */ -/* **************************************************************** */ - -#if defined (HAVE_POSIX_SIGNALS) -static sigset_t sigint_set, sigint_oset; -static sigset_t sigwinch_set, sigwinch_oset; -#else /* !HAVE_POSIX_SIGNALS */ -# if defined (HAVE_BSD_SIGNALS) -static int sigint_oldmask; -static int sigwinch_oldmask; -# endif /* HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - -static int sigint_blocked; -static int sigwinch_blocked; - -/* Cause SIGINT to not be delivered until the corresponding call to - release_sigint(). */ -void -_rl_block_sigint (void) -{ - if (sigint_blocked) - return; - - sigint_blocked = 1; -} - -/* Allow SIGINT to be delivered. */ -void -_rl_release_sigint (void) -{ - if (sigint_blocked == 0) - return; - - sigint_blocked = 0; - RL_CHECK_SIGNALS (); -} - -/* Cause SIGWINCH to not be delivered until the corresponding call to - release_sigwinch(). */ -void -_rl_block_sigwinch (void) -{ - if (sigwinch_blocked) - return; - -#if defined (SIGWINCH) - -#if defined (HAVE_POSIX_SIGNALS) - sigemptyset (&sigwinch_set); - sigemptyset (&sigwinch_oset); - sigaddset (&sigwinch_set, SIGWINCH); - sigprocmask (SIG_BLOCK, &sigwinch_set, &sigwinch_oset); -#else /* !HAVE_POSIX_SIGNALS */ -# if defined (HAVE_BSD_SIGNALS) - sigwinch_oldmask = sigblock (sigmask (SIGWINCH)); -# else /* !HAVE_BSD_SIGNALS */ -# if defined (HAVE_USG_SIGHOLD) - sighold (SIGWINCH); -# endif /* HAVE_USG_SIGHOLD */ -# endif /* !HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - -#endif /* SIGWINCH */ - - sigwinch_blocked = 1; -} - -/* Allow SIGWINCH to be delivered. */ -void -_rl_release_sigwinch (void) -{ - if (sigwinch_blocked == 0) - return; - -#if defined (SIGWINCH) - -#if defined (HAVE_POSIX_SIGNALS) - sigprocmask (SIG_SETMASK, &sigwinch_oset, (sigset_t *)NULL); -#else -# if defined (HAVE_BSD_SIGNALS) - sigsetmask (sigwinch_oldmask); -# else /* !HAVE_BSD_SIGNALS */ -# if defined (HAVE_USG_SIGHOLD) - sigrelse (SIGWINCH); -# endif /* HAVE_USG_SIGHOLD */ -# endif /* !HAVE_BSD_SIGNALS */ -#endif /* !HAVE_POSIX_SIGNALS */ - -#endif /* SIGWINCH */ - - sigwinch_blocked = 0; -} - -/* **************************************************************** */ -/* */ -/* Echoing special control characters */ -/* */ -/* **************************************************************** */ -void -rl_echo_signal_char (int sig) -{ - char cstr[3]; - int cslen, c; - - if (_rl_echoctl == 0 || _rl_echo_control_chars == 0) - return; - - switch (sig) - { - case SIGINT: c = _rl_intr_char; break; -#if defined (SIGQUIT) - case SIGQUIT: c = _rl_quit_char; break; -#endif -#if defined (SIGTSTP) - case SIGTSTP: c = _rl_susp_char; break; -#endif - default: return; - } - - if (CTRL_CHAR (c) || c == RUBOUT) - { - cstr[0] = '^'; - cstr[1] = CTRL_CHAR (c) ? UNCTRL (c) : '?'; - cstr[cslen = 2] = '\0'; - } - else - { - cstr[0] = c; - cstr[cslen = 1] = '\0'; - } - - _rl_output_some_chars (cstr, cslen); -} diff --git a/readline/support/config.guess b/readline/support/config.guess deleted file mode 100755 index 15c6cbfc5d..0000000000 --- a/readline/support/config.guess +++ /dev/null @@ -1,1702 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright 1992-2019 Free Software Foundation, Inc. - -timestamp='2019-08-04' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, see . -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). -# -# Originally written by Per Bothner; maintained since 2000 by Ben Elliston. -# -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess -# -# Please send patches to . - - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright 1992-2019 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -tmp= -# shellcheck disable=SC2172 -trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15 - -set_cc_for_build() { - : "${TMPDIR=/tmp}" - # shellcheck disable=SC2039 - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } - dummy=$tmp/dummy - case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in - ,,) echo "int x;" > "$dummy.c" - for driver in cc gcc c89 c99 ; do - if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then - CC_FOR_BUILD="$driver" - break - fi - done - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; - esac -} - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if test -f /.attbin/uname ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -case "$UNAME_SYSTEM" in -Linux|GNU|GNU/*) - # If the system lacks a compiler, then just pick glibc. - # We could probably try harder. - LIBC=gnu - - set_cc_for_build - cat <<-EOF > "$dummy.c" - #include - #if defined(__UCLIBC__) - LIBC=uclibc - #elif defined(__dietlibc__) - LIBC=dietlibc - #else - LIBC=gnu - #endif - EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" - - # If ldd exists, use it to detect musl libc. - if command -v ldd >/dev/null && \ - ldd --version 2>&1 | grep -q ^musl - then - LIBC=musl - fi - ;; -esac - -# Note: order is significant - the case branches are not exclusive. - -case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ - "/sbin/$sysctl" 2>/dev/null || \ - "/usr/sbin/$sysctl" 2>/dev/null || \ - echo unknown)` - case "$UNAME_MACHINE_ARCH" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - earmv*) - arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` - endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` - machine="${arch}${endian}"-unknown - ;; - *) machine="$UNAME_MACHINE_ARCH"-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently (or will in the future) and ABI. - case "$UNAME_MACHINE_ARCH" in - earm*) - os=netbsdelf - ;; - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # Determine ABI tags. - case "$UNAME_MACHINE_ARCH" in - earm*) - expr='s/^earmv[0-9]/-eabi/;s/eb$//' - abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "$UNAME_VERSION" in - Debian*) - release='-gnu' - ;; - *) - release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "$machine-${os}${release}${abi-}" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" - exit ;; - *:Bitrig:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" - exit ;; - *:LibertyBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` - echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" - exit ;; - *:MidnightBSD:*:*) - echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" - exit ;; - *:ekkoBSD:*:*) - echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" - exit ;; - *:SolidBSD:*:*) - echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:MirBSD:*:*) - echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" - exit ;; - *:Sortix:*:*) - echo "$UNAME_MACHINE"-unknown-sortix - exit ;; - *:Redox:*:*) - echo "$UNAME_MACHINE"-unknown-redox - exit ;; - mips:OSF1:*.*) - echo mips-dec-osf1 - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE=alpha ;; - "EV4.5 (21064)") - UNAME_MACHINE=alpha ;; - "LCA4 (21066/21068)") - UNAME_MACHINE=alpha ;; - "EV5 (21164)") - UNAME_MACHINE=alphaev5 ;; - "EV5.6 (21164A)") - UNAME_MACHINE=alphaev56 ;; - "EV5.6 (21164PC)") - UNAME_MACHINE=alphapca56 ;; - "EV5.7 (21164PC)") - UNAME_MACHINE=alphapca57 ;; - "EV6 (21264)") - UNAME_MACHINE=alphaev6 ;; - "EV6.7 (21264A)") - UNAME_MACHINE=alphaev67 ;; - "EV6.8CB (21264C)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8AL (21264B)") - UNAME_MACHINE=alphaev68 ;; - "EV6.8CX (21264D)") - UNAME_MACHINE=alphaev68 ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE=alphaev69 ;; - "EV7 (21364)") - UNAME_MACHINE=alphaev7 ;; - "EV7.9 (21364A)") - UNAME_MACHINE=alphaev79 ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" - # Reset EXIT trap before exiting to avoid spurious non-zero exit code. - exitcode=$? - trap '' 0 - exit $exitcode ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo "$UNAME_MACHINE"-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix"$UNAME_RELEASE" - exit ;; - arm*:riscos:*:*|arm*:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux"$UNAME_RELEASE" - exit ;; - i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux"$UNAME_RELEASE" - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - set_cc_for_build - SUN_ARCH=i386 - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH=x86_64 - fi - fi - echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos"$UNAME_RELEASE" - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos"$UNAME_RELEASE" - ;; - sun4) - echo sparc-sun-sunos"$UNAME_RELEASE" - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos"$UNAME_RELEASE" - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint"$UNAME_RELEASE" - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint"$UNAME_RELEASE" - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint"$UNAME_RELEASE" - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint"$UNAME_RELEASE" - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten"$UNAME_RELEASE" - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten"$UNAME_RELEASE" - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix"$UNAME_RELEASE" - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix"$UNAME_RELEASE" - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix"$UNAME_RELEASE" - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && - dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`"$dummy" "$dummyarg"` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos"$UNAME_RELEASE" - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] - then - if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ - [ "$TARGET_BINARY_INTERFACE"x = x ] - then - echo m88k-dg-dgux"$UNAME_RELEASE" - else - echo m88k-dg-dguxbcs"$UNAME_RELEASE" - fi - else - echo i586-dg-dgux"$UNAME_RELEASE" - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[4567]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/lslpp ] ; then - IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | - awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` - else - IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" - fi - echo "$IBM_ARCH"-ibm-aix"$IBM_REV" - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - case "$UNAME_MACHINE" in - 9000/31?) HP_ARCH=m68000 ;; - 9000/[34]??) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "$sc_cpu_version" in - 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 - 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "$sc_kernel_bits" in - 32) HP_ARCH=hppa2.0n ;; - 64) HP_ARCH=hppa2.0w ;; - '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "$HP_ARCH" = "" ]; then - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ "$HP_ARCH" = hppa2.0w ] - then - set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH=hppa2.0w - else - HP_ARCH=hppa64 - fi - fi - echo "$HP_ARCH"-hp-hpux"$HPUX_REV" - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux"$HPUX_REV" - exit ;; - 3050*:HI-UX:*:*) - set_cc_for_build - sed 's/^ //' << EOF > "$dummy.c" - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo "$UNAME_MACHINE"-unknown-osf1mk - else - echo "$UNAME_MACHINE"-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` - FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi"$UNAME_RELEASE" - exit ;; - *:BSD/OS:*:*) - echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" - exit ;; - arm:FreeBSD:*:*) - UNAME_PROCESSOR=`uname -p` - set_cc_for_build - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabi - else - echo "${UNAME_PROCESSOR}"-unknown-freebsd"`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`"-gnueabihf - fi - exit ;; - *:FreeBSD:*:*) - UNAME_PROCESSOR=`/usr/bin/uname -p` - case "$UNAME_PROCESSOR" in - amd64) - UNAME_PROCESSOR=x86_64 ;; - i386) - UNAME_PROCESSOR=i586 ;; - esac - echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - i*:CYGWIN*:*) - echo "$UNAME_MACHINE"-pc-cygwin - exit ;; - *:MINGW64*:*) - echo "$UNAME_MACHINE"-pc-mingw64 - exit ;; - *:MINGW64*:*) - echo "$UNAME_MACHINE"-pc-mingw64 - exit ;; - *:MINGW*:*) - echo "$UNAME_MACHINE"-pc-mingw32 - exit ;; - *:MSYS*:*) - echo "$UNAME_MACHINE"-pc-msys - exit ;; - i*:PW*:*) - echo "$UNAME_MACHINE"-pc-pw32 - exit ;; - *:Interix*:*) - case "$UNAME_MACHINE" in - x86) - echo i586-pc-interix"$UNAME_RELEASE" - exit ;; - authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix"$UNAME_RELEASE" - exit ;; - IA64) - echo ia64-unknown-interix"$UNAME_RELEASE" - exit ;; - esac ;; - i*:UWIN*:*) - echo "$UNAME_MACHINE"-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-pc-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" - exit ;; - *:GNU:*:*) - # the GNU system - echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" - exit ;; - *:Minix:*:*) - echo "$UNAME_MACHINE"-unknown-minix - exit ;; - aarch64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - aarch64_be:Linux:*:*) - UNAME_MACHINE=aarch64_be - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC=gnulibc1 ; fi - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arc:Linux:*:* | arceb:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - arm*:Linux:*:*) - set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - else - if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_PCS_VFP - then - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi - else - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf - fi - fi - exit ;; - avr32*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - cris:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - crisv32:Linux:*:*) - echo "$UNAME_MACHINE"-axis-linux-"$LIBC" - exit ;; - e2k:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - frv:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - hexagon:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - ia64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - k1om:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m32r*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - m68*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - set_cc_for_build - IS_GLIBC=0 - test x"${LIBC}" = xgnu && IS_GLIBC=1 - sed 's/^ //' << EOF > "$dummy.c" - #undef CPU - #undef mips - #undef mipsel - #undef mips64 - #undef mips64el - #if ${IS_GLIBC} && defined(_ABI64) - LIBCABI=gnuabi64 - #else - #if ${IS_GLIBC} && defined(_ABIN32) - LIBCABI=gnuabin32 - #else - LIBCABI=${LIBC} - #endif - #endif - - #if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 - CPU=mipsisa64r6 - #else - #if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6 - CPU=mipsisa32r6 - #else - #if defined(__mips64) - CPU=mips64 - #else - CPU=mips - #endif - #endif - #endif - - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - MIPS_ENDIAN=el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - MIPS_ENDIAN= - #else - MIPS_ENDIAN= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`" - test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; } - ;; - mips64el:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - openrisc*:Linux:*:*) - echo or1k-unknown-linux-"$LIBC" - exit ;; - or32:Linux:*:* | or1k*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-"$LIBC" - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-"$LIBC" - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; - PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; - *) echo hppa-unknown-linux-"$LIBC" ;; - esac - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-"$LIBC" - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-"$LIBC" - exit ;; - ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-"$LIBC" - exit ;; - ppcle:Linux:*:*) - echo powerpcle-unknown-linux-"$LIBC" - exit ;; - riscv32:Linux:*:* | riscv64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" - exit ;; - sh64*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sh*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - tile*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - vax:Linux:*:*) - echo "$UNAME_MACHINE"-dec-linux-"$LIBC" - exit ;; - x86_64:Linux:*:*) - echo "$UNAME_MACHINE"-pc-linux-"$LIBC" - exit ;; - xtensa*:Linux:*:*) - echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" - exit ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo "$UNAME_MACHINE"-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo "$UNAME_MACHINE"-unknown-stop - exit ;; - i*86:atheos:*:*) - echo "$UNAME_MACHINE"-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo "$UNAME_MACHINE"-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos"$UNAME_RELEASE" - exit ;; - i*86:*DOS:*:*) - echo "$UNAME_MACHINE"-pc-msdosdjgpp - exit ;; - i*86:*:4.*:*) - UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}" - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" - else - echo "$UNAME_MACHINE"-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configure will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos"$UNAME_RELEASE" - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos"$UNAME_RELEASE" - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos"$UNAME_RELEASE" - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv"$UNAME_RELEASE" - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo "$UNAME_MACHINE"-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo "$UNAME_MACHINE"-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux"$UNAME_RELEASE" - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv"$UNAME_RELEASE" - else - echo mips-unknown-sysv"$UNAME_RELEASE" - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - x86_64:Haiku:*:*) - echo x86_64-unknown-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux"$UNAME_RELEASE" - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux"$UNAME_RELEASE" - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux"$UNAME_RELEASE" - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux"$UNAME_RELEASE" - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux"$UNAME_RELEASE" - exit ;; - SX-ACE:SUPER-UX:*:*) - echo sxace-nec-superux"$UNAME_RELEASE" - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Rhapsody:*:*) - echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - set_cc_for_build - if test "$UNAME_PROCESSOR" = unknown ; then - UNAME_PROCESSOR=powerpc - fi - if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then - if [ "$CC_FOR_BUILD" != no_compiler_found ]; then - if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - case $UNAME_PROCESSOR in - i386) UNAME_PROCESSOR=x86_64 ;; - powerpc) UNAME_PROCESSOR=powerpc64 ;; - esac - fi - # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc - if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ - (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_PPC >/dev/null - then - UNAME_PROCESSOR=powerpc - fi - fi - elif test "$UNAME_PROCESSOR" = i386 ; then - # Avoid executing cc on OS X 10.9, as it ships with a stub - # that puts up a graphical alert prompting to install - # developer tools. Any system running Mac OS X 10.7 or - # later (Darwin 11 and later) is required to have a 64-bit - # processor. This is not true of the ARM version of Darwin - # that Apple uses in portable devices. - UNAME_PROCESSOR=x86_64 - fi - echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = x86; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NEO-*:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSR-*:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSV-*:NONSTOP_KERNEL:*:*) - echo nsv-tandem-nsk"$UNAME_RELEASE" - exit ;; - NSX-*:NONSTOP_KERNEL:*:*) - echo nsx-tandem-nsk"$UNAME_RELEASE" - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - # shellcheck disable=SC2154 - if test "$cputype" = 386; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo "$UNAME_MACHINE"-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux"$UNAME_RELEASE" - exit ;; - *:DragonFly:*:*) - echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "$UNAME_MACHINE" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" - exit ;; - i*86:rdos:*:*) - echo "$UNAME_MACHINE"-pc-rdos - exit ;; - i*86:AROS:*:*) - echo "$UNAME_MACHINE"-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo "$UNAME_MACHINE"-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; - *:Unleashed:*:*) - echo "$UNAME_MACHINE"-unknown-unleashed"$UNAME_RELEASE" - exit ;; - i*86:AROS:*:*) - echo "$UNAME_MACHINE"-pc-aros - exit ;; - x86_64:VMkernel:*:*) - echo "$UNAME_MACHINE"-unknown-esx - exit ;; - amd64:Isilon\ OneFS:*:*) - echo x86_64-unknown-onefs - exit ;; -esac - -# No uname command or uname output not recognized. -set_cc_for_build -cat > "$dummy.c" < -#include -#endif -#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) -#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) -#include -#if defined(_SIZE_T_) || defined(SIGLOST) -#include -#endif -#endif -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); -#endif - -#if defined (vax) -#if !defined (ultrix) -#include -#if defined (BSD) -#if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -#else -#if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -#else - printf ("vax-dec-bsd\n"); exit (0); -#endif -#endif -#else - printf ("vax-dec-bsd\n"); exit (0); -#endif -#else -#if defined(_SIZE_T_) || defined(SIGLOST) - struct utsname un; - uname (&un); - printf ("vax-dec-ultrix%s\n", un.release); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif -#endif -#endif -#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__) -#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__) -#if defined(_SIZE_T_) || defined(SIGLOST) - struct utsname *un; - uname (&un); - printf ("mips-dec-ultrix%s\n", un.release); exit (0); -#else - printf ("mips-dec-ultrix\n"); exit (0); -#endif -#endif -#endif - -case "$UNAME_MACHINE:$UNAME_SYSTEM" in - mips:Linux | mips64:Linux) - # If we got here on MIPS GNU/Linux, output extra information. - cat >&2 </dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. -test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; } - -echo "$0: unable to guess system type" >&2 - -case "$UNAME_MACHINE:$UNAME_SYSTEM" in - mips:Linux | mips64:Linux) - # If we got here on MIPS GNU/Linux, output extra information. - cat >&2 <&2 </dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = "$UNAME_MACHINE" -UNAME_RELEASE = "$UNAME_RELEASE" -UNAME_SYSTEM = "$UNAME_SYSTEM" -UNAME_VERSION = "$UNAME_VERSION" -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/readline/support/config.rpath b/readline/support/config.rpath deleted file mode 100755 index fc5913d787..0000000000 --- a/readline/support/config.rpath +++ /dev/null @@ -1,684 +0,0 @@ -#! /bin/sh -# Output a system dependent set of variables, describing how to set the -# run time search path of shared libraries in an executable. -# -# Copyright 1996-2018 Free Software Foundation, Inc. -# Taken from GNU libtool, 2001 -# Originally by Gordon Matzigkeit , 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. -# -# The first argument passed to this file is the canonical host specification, -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld -# should be set by the caller. -# -# The set of defined variables is at the end of this script. - -# Known limitations: -# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer -# than 256 bytes, otherwise the compiler driver will dump core. The only -# known workaround is to choose shorter directory names for the build -# directory and/or the installation directory. - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a -shrext=.so - -host="$1" -host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` - -# Code taken from libtool.m4's _LT_CC_BASENAME. - -for cc_temp in $CC""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'` - -# Code taken from libtool.m4's _LT_COMPILER_PIC. - -wl= -if test "$GCC" = yes; then - wl='-Wl,' -else - case "$host_os" in - aix*) - wl='-Wl,' - ;; - mingw* | cygwin* | pw32* | os2* | cegcc*) - ;; - hpux9* | hpux10* | hpux11*) - wl='-Wl,' - ;; - irix5* | irix6* | nonstopux*) - wl='-Wl,' - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - ecc*) - wl='-Wl,' - ;; - icc* | ifort*) - wl='-Wl,' - ;; - lf95*) - wl='-Wl,' - ;; - nagfor*) - wl='-Wl,-Wl,,' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - wl='-Wl,' - ;; - ccc*) - wl='-Wl,' - ;; - xl* | bgxl* | bgf* | mpixl*) - wl='-Wl,' - ;; - como) - wl='-lopt=' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - wl= - ;; - *Sun\ C*) - wl='-Wl,' - ;; - esac - ;; - esac - ;; - newsos6) - ;; - *nto* | *qnx*) - ;; - osf3* | osf4* | osf5*) - wl='-Wl,' - ;; - rdos*) - ;; - solaris*) - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - wl='-Qoption ld ' - ;; - *) - wl='-Wl,' - ;; - esac - ;; - sunos4*) - wl='-Qoption ld ' - ;; - sysv4 | sysv4.2uw2* | sysv4.3*) - wl='-Wl,' - ;; - sysv4*MP*) - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - wl='-Wl,' - ;; - unicos*) - wl='-Wl,' - ;; - uts4*) - ;; - esac -fi - -# Code taken from libtool.m4's _LT_LINKER_SHLIBS. - -hardcode_libdir_flag_spec= -hardcode_libdir_separator= -hardcode_direct=no -hardcode_minus_L=no - -case "$host_os" in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; -esac - -ld_shlibs=yes -if test "$with_gnu_ld" = yes; then - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - # Unlike libtool, we use -rpath here, not --rpath, since the documented - # option of GNU ld is called -rpath, not --rpath. - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - case "$host_os" in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - beos*) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - cygwin* | mingw* | pw32* | cegcc*) - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - haiku*) - ;; - interix[3-9]*) - hardcode_direct=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - netbsd*) - ;; - solaris*) - if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' - else - ld_shlibs=no - fi - ;; - esac - ;; - sunos4*) - hardcode_direct=yes - ;; - *) - if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then - : - else - ld_shlibs=no - fi - ;; - esac - if test "$ld_shlibs" = no; then - hardcode_libdir_flag_spec= - fi -else - case "$host_os" in - aix3*) - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - else - aix_use_runtimelinking=no - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - fi - hardcode_direct=yes - hardcode_libdir_separator=':' - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && \ - strings "$collect2name" | grep resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - fi - # Begin _LT_AC_SYS_LIBPATH_AIX. - echo 'int main () { return 0; }' > conftest.c - ${CC} ${LDFLAGS} conftest.c -o conftest - aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } -}'` - fi - if test -z "$aix_libpath"; then - aix_libpath="/usr/lib:/lib" - fi - rm -f conftest.c conftest - # End _LT_AC_SYS_LIBPATH_AIX. - if test "$aix_use_runtimelinking" = yes; then - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - else - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - fi - fi - ;; - amigaos*) - case "$host_cpu" in - powerpc) - ;; - m68k) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - bsdi[45]*) - ;; - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - libext=lib - ;; - darwin* | rhapsody*) - hardcode_direct=no - if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then - : - else - ld_shlibs=no - fi - ;; - dgux*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - freebsd2.[01]*) - hardcode_direct=yes - hardcode_minus_L=yes - ;; - freebsd* | dragonfly*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - hpux9*) - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - hpux10*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - hpux11*) - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - ;; - *) - hardcode_direct=yes - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - irix5* | irix6* | nonstopux*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - netbsd*) - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - ;; - newsos6) - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - *nto* | *qnx*) - ;; - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - else - case "$host_os" in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - osf3*) - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - osf4* | osf5*) - if test "$GCC" = yes; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - # Both cc and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - hardcode_libdir_separator=: - ;; - solaris*) - hardcode_libdir_flag_spec='-R$libdir' - ;; - sunos4*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - ;; - sysv4) - case $host_vendor in - sni) - hardcode_direct=yes # is this really true??? - ;; - siemens) - hardcode_direct=no - ;; - motorola) - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - ;; - sysv4.3*) - ;; - sysv4*MP*) - if test -d /usr/nec; then - ld_shlibs=yes - fi - ;; - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - ;; - sysv5* | sco3.2v5* | sco5v6*) - hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' - hardcode_libdir_separator=':' - ;; - uts4*) - hardcode_libdir_flag_spec='-L$libdir' - ;; - *) - ld_shlibs=no - ;; - esac -fi - -# Check dynamic linker characteristics -# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER. -# Unlike libtool.m4, here we don't care about _all_ names of the library, but -# only about the one the linker finds when passed -lNAME. This is the last -# element of library_names_spec in libtool.m4, or possibly two of them if the -# linker has special search rules. -library_names_spec= # the last element of library_names_spec in libtool.m4 -libname_spec='lib$name' -case "$host_os" in - aix3*) - library_names_spec='$libname.a' - ;; - aix[4-9]*) - library_names_spec='$libname$shrext' - ;; - amigaos*) - case "$host_cpu" in - powerpc*) - library_names_spec='$libname$shrext' ;; - m68k) - library_names_spec='$libname.a' ;; - esac - ;; - beos*) - library_names_spec='$libname$shrext' - ;; - bsdi[45]*) - library_names_spec='$libname$shrext' - ;; - cygwin* | mingw* | pw32* | cegcc*) - shrext=.dll - library_names_spec='$libname.dll.a $libname.lib' - ;; - darwin* | rhapsody*) - shrext=.dylib - library_names_spec='$libname$shrext' - ;; - dgux*) - library_names_spec='$libname$shrext' - ;; - freebsd[23].*) - library_names_spec='$libname$shrext$versuffix' - ;; - freebsd* | dragonfly*) - library_names_spec='$libname$shrext' - ;; - gnu*) - library_names_spec='$libname$shrext' - ;; - haiku*) - library_names_spec='$libname$shrext' - ;; - hpux9* | hpux10* | hpux11*) - case $host_cpu in - ia64*) - shrext=.so - ;; - hppa*64*) - shrext=.sl - ;; - *) - shrext=.sl - ;; - esac - library_names_spec='$libname$shrext' - ;; - interix[3-9]*) - library_names_spec='$libname$shrext' - ;; - irix5* | irix6* | nonstopux*) - library_names_spec='$libname$shrext' - case "$host_os" in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; - *) libsuff= shlibsuff= ;; - esac - ;; - esac - ;; - linux*oldld* | linux*aout* | linux*coff*) - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - library_names_spec='$libname$shrext' - ;; - knetbsd*-gnu) - library_names_spec='$libname$shrext' - ;; - netbsd*) - library_names_spec='$libname$shrext' - ;; - newsos6) - library_names_spec='$libname$shrext' - ;; - *nto* | *qnx*) - library_names_spec='$libname$shrext' - ;; - openbsd*) - library_names_spec='$libname$shrext$versuffix' - ;; - os2*) - libname_spec='$name' - shrext=.dll - library_names_spec='$libname.a' - ;; - osf3* | osf4* | osf5*) - library_names_spec='$libname$shrext' - ;; - rdos*) - ;; - solaris*) - library_names_spec='$libname$shrext' - ;; - sunos4*) - library_names_spec='$libname$shrext$versuffix' - ;; - sysv4 | sysv4.3*) - library_names_spec='$libname$shrext' - ;; - sysv4*MP*) - library_names_spec='$libname$shrext' - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - library_names_spec='$libname$shrext' - ;; - tpf*) - library_names_spec='$libname$shrext' - ;; - uts4*) - library_names_spec='$libname$shrext' - ;; -esac - -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' -escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` -shlibext=`echo "$shrext" | sed -e 's,^\.,,'` -escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` -escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` - -LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that -# program. This Exception is an additional permission under section 7 -# of the GNU General Public License, version 3 ("GPLv3"). - - -# Please send patches to . -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# You can get the latest version of this script from: -# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS - -Canonicalize a configuration name. - -Options: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright 1992-2019 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo "$1" - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Split fields of configuration type -# shellcheck disable=SC2162 -IFS="-" read field1 field2 field3 field4 <&2 - exit 1 - ;; - *-*-*-*) - basic_machine=$field1-$field2 - os=$field3-$field4 - ;; - *-*-*) - # Ambiguous whether COMPANY is present, or skipped and KERNEL-OS is two - # parts - maybe_os=$field2-$field3 - case $maybe_os in - nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc \ - | linux-newlib* | linux-musl* | linux-uclibc* | uclinux-uclibc* \ - | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* \ - | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \ - | storm-chaos* | os2-emx* | rtmk-nova*) - basic_machine=$field1 - os=$maybe_os - ;; - android-linux) - basic_machine=$field1-unknown - os=linux-android - ;; - *) - basic_machine=$field1-$field2 - os=$field3 - ;; - esac - ;; - *-*) - # A lone config we happen to match not fitting any pattern - case $field1-$field2 in - decstation-3100) - basic_machine=mips-dec - os= - ;; - *-*) - # Second component is usually, but not always the OS - case $field2 in - # Prevent following clause from handling this valid os - sun*os*) - basic_machine=$field1 - os=$field2 - ;; - # Manufacturers - dec* | mips* | sequent* | encore* | pc533* | sgi* | sony* \ - | att* | 7300* | 3300* | delta* | motorola* | sun[234]* \ - | unicom* | ibm* | next | hp | isi* | apollo | altos* \ - | convergent* | ncr* | news | 32* | 3600* | 3100* \ - | hitachi* | c[123]* | convex* | sun | crds | omron* | dg \ - | ultra | tti* | harris | dolphin | highlevel | gould \ - | cbm | ns | masscomp | apple | axis | knuth | cray \ - | microblaze* | sim | cisco \ - | oki | wec | wrs | winbond) - basic_machine=$field1-$field2 - os= - ;; - *) - basic_machine=$field1 - os=$field2 - ;; - esac - ;; - esac - ;; - *) - # Convert single-component short-hands not valid as part of - # multi-component configurations. - case $field1 in - 386bsd) - basic_machine=i386-pc - os=bsd - ;; - a29khif) - basic_machine=a29k-amd - os=udi - ;; - adobe68k) - basic_machine=m68010-adobe - os=scout - ;; - alliant) - basic_machine=fx80-alliant - os= - ;; - altos | altos3068) - basic_machine=m68k-altos - os= - ;; - am29k) - basic_machine=a29k-none - os=bsd - ;; - amdahl) - basic_machine=580-amdahl - os=sysv - ;; - amiga) - basic_machine=m68k-unknown - os= - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=bsd - ;; - aros) - basic_machine=i386-pc - os=aros - ;; - aux) - basic_machine=m68k-apple - os=aux - ;; - balance) - basic_machine=ns32k-sequent - os=dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=linux - ;; - cegcc) - basic_machine=arm-unknown - os=cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=bsd - ;; - convex-c2) - basic_machine=c2-convex - os=bsd - ;; - convex-c32) - basic_machine=c32-convex - os=bsd - ;; - convex-c34) - basic_machine=c34-convex - os=bsd - ;; - convex-c38) - basic_machine=c38-convex - os=bsd - ;; - cray) - basic_machine=j90-cray - os=unicos - ;; - crds | unos) - basic_machine=m68k-crds - os= - ;; - da30) - basic_machine=m68k-da30 - os= - ;; - decstation | pmax | pmin | dec3100 | decstatn) - basic_machine=mips-dec - os= - ;; - delta88) - basic_machine=m88k-motorola - os=sysv3 - ;; - dicos) - basic_machine=i686-pc - os=dicos - ;; - djgpp) - basic_machine=i586-pc - os=msdosdjgpp - ;; - ebmon29k) - basic_machine=a29k-amd - os=ebmon - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=ose - ;; - gmicro) - basic_machine=tron-gmicro - os=sysv - ;; - go32) - basic_machine=i386-pc - os=go32 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=hms - ;; - harris) - basic_machine=m88k-harris - os=sysv3 - ;; - hp300) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=hpux - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=proelf - ;; - i386mach) - basic_machine=i386-mach - os=mach - ;; - vsta) - basic_machine=i386-pc - os=vsta - ;; - isi68 | isi) - basic_machine=m68k-isi - os=sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=linux - ;; - magnum | m3230) - basic_machine=mips-mips - os=sysv - ;; - merlin) - basic_machine=ns32k-utek - os=sysv - ;; - mingw64) - basic_machine=x86_64-pc - os=mingw64 - ;; - mingw32) - basic_machine=i686-pc - os=mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=mingw32ce - ;; - monitor) - basic_machine=m68k-rom68k - os=coff - ;; - morphos) - basic_machine=powerpc-unknown - os=morphos - ;; - moxiebox) - basic_machine=moxie-unknown - os=moxiebox - ;; - msdos) - basic_machine=i386-pc - os=msdos - ;; - msys) - basic_machine=i686-pc - os=msys - ;; - mvs) - basic_machine=i370-ibm - os=mvs - ;; - nacl) - basic_machine=le32-unknown - os=nacl - ;; - ncr3000) - basic_machine=i486-ncr - os=sysv4 - ;; - netbsd386) - basic_machine=i386-pc - os=netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=newsos - ;; - news1000) - basic_machine=m68030-sony - os=newsos - ;; - necv70) - basic_machine=v70-nec - os=sysv - ;; - nh3000) - basic_machine=m68k-harris - os=cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=cxux - ;; - nindy960) - basic_machine=i960-intel - os=nindy - ;; - mon960) - basic_machine=i960-intel - os=mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=nonstopux - ;; - os400) - basic_machine=powerpc-ibm - os=os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=ose - ;; - os68k) - basic_machine=m68k-none - os=os68k - ;; - paragon) - basic_machine=i860-intel - os=osf - ;; - parisc) - basic_machine=hppa-unknown - os=linux - ;; - pw32) - basic_machine=i586-unknown - os=pw32 - ;; - rdos | rdos64) - basic_machine=x86_64-pc - os=rdos - ;; - rdos32) - basic_machine=i386-pc - os=rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=coff - ;; - sa29200) - basic_machine=a29k-amd - os=udi - ;; - sei) - basic_machine=mips-sei - os=seiux - ;; - sequent) - basic_machine=i386-sequent - os= - ;; - sps7) - basic_machine=m68k-bull - os=sysv2 - ;; - st2000) - basic_machine=m68k-tandem - os= - ;; - stratus) - basic_machine=i860-stratus - os=sysv4 - ;; - sun2) - basic_machine=m68000-sun - os= - ;; - sun2os3) - basic_machine=m68000-sun - os=sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=sunos4 - ;; - sun3) - basic_machine=m68k-sun - os= - ;; - sun3os3) - basic_machine=m68k-sun - os=sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=sunos4 - ;; - sun4) - basic_machine=sparc-sun - os= - ;; - sun4os3) - basic_machine=sparc-sun - os=sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=solaris2 - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - os= - ;; - sv1) - basic_machine=sv1-cray - os=unicos - ;; - symmetry) - basic_machine=i386-sequent - os=dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=unicos - ;; - t90) - basic_machine=t90-cray - os=unicos - ;; - toad1) - basic_machine=pdp10-xkl - os=tops20 - ;; - tpf) - basic_machine=s390x-ibm - os=tpf - ;; - udi29k) - basic_machine=a29k-amd - os=udi - ;; - ultra3) - basic_machine=a29k-nyu - os=sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=none - ;; - vaxv) - basic_machine=vax-dec - os=sysv - ;; - vms) - basic_machine=vax-dec - os=vms - ;; - vxworks960) - basic_machine=i960-wrs - os=vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=vxworks - ;; - xbox) - basic_machine=i686-pc - os=mingw32 - ;; - ymp) - basic_machine=ymp-cray - os=unicos - ;; - *) - basic_machine=$1 - os= - ;; - esac - ;; -esac - -# Decode 1-component or ad-hoc basic machines -case $basic_machine in - # Here we handle the default manufacturer of certain CPU types. It is in - # some cases the only manufacturer, in others, it is the most popular. - w89k) - cpu=hppa1.1 - vendor=winbond - ;; - op50n) - cpu=hppa1.1 - vendor=oki - ;; - op60c) - cpu=hppa1.1 - vendor=oki - ;; - ibm*) - cpu=i370 - vendor=ibm - ;; - orion105) - cpu=clipper - vendor=highlevel - ;; - mac | mpw | mac-mpw) - cpu=m68k - vendor=apple - ;; - pmac | pmac-mpw) - cpu=powerpc - vendor=apple - ;; - - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - cpu=m68000 - vendor=att - ;; - 3b*) - cpu=we32k - vendor=att - ;; - bluegene*) - cpu=powerpc - vendor=ibm - os=cnk - ;; - decsystem10* | dec10*) - cpu=pdp10 - vendor=dec - os=tops10 - ;; - decsystem20* | dec20*) - cpu=pdp10 - vendor=dec - os=tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - cpu=m68k - vendor=motorola - ;; - dpx2*) - cpu=m68k - vendor=bull - os=sysv3 - ;; - encore | umax | mmax) - cpu=ns32k - vendor=encore - ;; - elxsi) - cpu=elxsi - vendor=elxsi - os=${os:-bsd} - ;; - fx2800) - cpu=i860 - vendor=alliant - ;; - genix) - cpu=ns32k - vendor=ns - ;; - h3050r* | hiux*) - cpu=hppa1.1 - vendor=hitachi - os=hiuxwe2 - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - cpu=m68000 - vendor=hp - ;; - hp9k3[2-9][0-9]) - cpu=m68k - vendor=hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - cpu=hppa1.1 - vendor=hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - cpu=hppa1.1 - vendor=hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - cpu=hppa1.0 - vendor=hp - ;; - i*86v32) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv32 - ;; - i*86v4*) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv4 - ;; - i*86v) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=sysv - ;; - i*86sol2) - cpu=`echo "$1" | sed -e 's/86.*/86/'` - vendor=pc - os=solaris2 - ;; - j90 | j90-cray) - cpu=j90 - vendor=cray - os=${os:-unicos} - ;; - iris | iris4d) - cpu=mips - vendor=sgi - case $os in - irix*) - ;; - *) - os=irix4 - ;; - esac - ;; - miniframe) - cpu=m68000 - vendor=convergent - ;; - *mint | mint[0-9]* | *MiNT | *MiNT[0-9]*) - cpu=m68k - vendor=atari - os=mint - ;; - news-3600 | risc-news) - cpu=mips - vendor=sony - os=newsos - ;; - next | m*-next) - cpu=m68k - vendor=next - case $os in - openstep*) - ;; - nextstep*) - ;; - ns2*) - os=nextstep2 - ;; - *) - os=nextstep3 - ;; - esac - ;; - np1) - cpu=np1 - vendor=gould - ;; - op50n-* | op60c-*) - cpu=hppa1.1 - vendor=oki - os=proelf - ;; - pa-hitachi) - cpu=hppa1.1 - vendor=hitachi - os=hiuxwe2 - ;; - pbd) - cpu=sparc - vendor=tti - ;; - pbb) - cpu=m68k - vendor=tti - ;; - pc532) - cpu=ns32k - vendor=pc532 - ;; - pn) - cpu=pn - vendor=gould - ;; - power) - cpu=power - vendor=ibm - ;; - ps2) - cpu=i386 - vendor=ibm - ;; - rm[46]00) - cpu=mips - vendor=siemens - ;; - rtpc | rtpc-*) - cpu=romp - vendor=ibm - ;; - sde) - cpu=mipsisa32 - vendor=sde - os=${os:-elf} - ;; - simso-wrs) - cpu=sparclite - vendor=wrs - os=vxworks - ;; - tower | tower-32) - cpu=m68k - vendor=ncr - ;; - vpp*|vx|vx-*) - cpu=f301 - vendor=fujitsu - ;; - w65) - cpu=w65 - vendor=wdc - ;; - w89k-*) - cpu=hppa1.1 - vendor=winbond - os=proelf - ;; - none) - cpu=none - vendor=none - ;; - leon|leon[3-9]) - cpu=sparc - vendor=$basic_machine - ;; - leon-*|leon[3-9]-*) - cpu=sparc - vendor=`echo "$basic_machine" | sed 's/-.*//'` - ;; - - *-*) - # shellcheck disable=SC2162 - IFS="-" read cpu vendor <&2 - exit 1 - ;; - esac - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $vendor in - digital*) - vendor=dec - ;; - commodore*) - vendor=cbm - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x$os != x ] -then -case $os in - # First match some system type aliases that might get confused - # with valid system types. - # solaris* is a basic system type, with this one exception. - auroraux) - os=auroraux - ;; - bluegene*) - os=cnk - ;; - solaris1 | solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - solaris) - os=solaris2 - ;; - unixware*) - os=sysv4.2uw - ;; - gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # es1800 is here to avoid being matched by es* (a different OS) - es1800*) - os=ose - ;; - # Some version numbers need modification - chorusos*) - os=chorusos - ;; - isc) - os=isc2.2 - ;; - sco6) - os=sco5v6 - ;; - sco5) - os=sco3.2v5 - ;; - sco4) - os=sco3.2v4 - ;; - sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - ;; - sco3.2v[4-9]* | sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - ;; - scout) - # Don't match below - ;; - sco*) - os=sco3.2v2 - ;; - psos*) - os=psos - ;; - # Now accept the basic system types. - # The portable systems comes first. - # Each alternative MUST end in a * to match a version number. - # sysv* is not here because it comes later, after sysvr4. - gnu* | bsd* | mach* | minix* | genix* | ultrix* | irix* \ - | *vms* | esix* | aix* | cnk* | sunos | sunos[34]*\ - | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \ - | sym* | kopensolaris* | plan9* \ - | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \ - | aos* | aros* | cloudabi* | sortix* \ - | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \ - | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \ - | knetbsd* | mirbsd* | netbsd* \ - | bitrig* | openbsd* | solidbsd* | libertybsd* \ - | ekkobsd* | kfreebsd* | freebsd* | riscix* | lynxos* \ - | bosx* | nextstep* | cxux* | aout* | elf* | oabi* \ - | ptx* | coff* | ecoff* | winnt* | domain* | vsta* \ - | udi* | eabi* | lites* | ieee* | go32* | aux* | hcos* \ - | chorusrdb* | cegcc* | glidix* \ - | cygwin* | msys* | pe* | moss* | proelf* | rtems* \ - | midipix* | mingw32* | mingw64* | linux-gnu* | linux-android* \ - | linux-newlib* | linux-musl* | linux-uclibc* \ - | uxpv* | beos* | mpeix* | udk* | moxiebox* \ - | interix* | uwin* | mks* | rhapsody* | darwin* \ - | openstep* | oskit* | conix* | pw32* | nonstopux* \ - | storm-chaos* | tops10* | tenex* | tops20* | its* \ - | os2* | vos* | palmos* | uclinux* | nucleus* \ - | morphos* | superux* | rtmk* | windiss* \ - | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \ - | skyos* | haiku* | rdos* | toppers* | drops* | es* \ - | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \ - | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - qnx*) - case $cpu in - x86 | i*86) - ;; - *) - os=nto-$os - ;; - esac - ;; - hiux*) - os=hiuxwe2 - ;; - nto-qnx*) - ;; - nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - sim | xray | os68k* | v88r* \ - | windows* | osx | abug | netware* | os9* \ - | macos* | mpw* | magic* | mmixware* | mon960* | lnews*) - ;; - linux-dietlibc) - os=linux-dietlibc - ;; - linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - lynx*178) - os=lynxos178 - ;; - lynx*5) - os=lynxos5 - ;; - lynx*) - os=lynxos - ;; - mac*) - os=`echo "$os" | sed -e 's|mac|macos|'` - ;; - opened*) - os=openedition - ;; - os400*) - os=os400 - ;; - sunos5*) - os=`echo "$os" | sed -e 's|sunos5|solaris2|'` - ;; - sunos6*) - os=`echo "$os" | sed -e 's|sunos6|solaris3|'` - ;; - wince*) - os=wince - ;; - utek*) - os=bsd - ;; - dynix*) - os=bsd - ;; - acis*) - os=aos - ;; - atheos*) - os=atheos - ;; - syllable*) - os=syllable - ;; - 386bsd) - os=bsd - ;; - ctix* | uts*) - os=sysv - ;; - nova*) - os=rtmk-nova - ;; - ns2) - os=nextstep2 - ;; - nsk*) - os=nsk - ;; - # Preserve the version number of sinix5. - sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - sinix*) - os=sysv4 - ;; - tpf*) - os=tpf - ;; - triton*) - os=sysv3 - ;; - oss*) - os=sysv3 - ;; - svr4*) - os=sysv4 - ;; - svr3) - os=sysv3 - ;; - sysvr4) - os=sysv4 - ;; - # This must come after sysvr4. - sysv*) - ;; - ose*) - os=ose - ;; - *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) - os=mint - ;; - zvmoe) - os=zvmoe - ;; - dicos*) - os=dicos - ;; - pikeos*) - # Until real need of OS specific support for - # particular features comes up, bare metal - # configurations are quite functional. - case $cpu in - arm*) - os=eabi - ;; - *) - os=elf - ;; - esac - ;; - nacl*) - ;; - ios) - ;; - none) - ;; - *-eabi) - ;; - *) - echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $cpu-$vendor in - score-*) - os=elf - ;; - spu-*) - os=elf - ;; - *-acorn) - os=riscix1.2 - ;; - arm*-rebel) - os=linux - ;; - arm*-semi) - os=aout - ;; - c4x-* | tic4x-*) - os=coff - ;; - c8051-*) - os=elf - ;; - clipper-intergraph) - os=clix - ;; - hexagon-*) - os=elf - ;; - tic54x-*) - os=coff - ;; - tic55x-*) - os=coff - ;; - tic6x-*) - os=coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=tops20 - ;; - pdp11-*) - os=none - ;; - *-dec | vax-*) - os=ultrix4.2 - ;; - m68*-apollo) - os=domain - ;; - i386-sun) - os=sunos4.0.2 - ;; - m68000-sun) - os=sunos3 - ;; - m68*-cisco) - os=aout - ;; - mep-*) - os=elf - ;; - mips*-cisco) - os=elf - ;; - mips*-*) - os=elf - ;; - or1k-*) - os=-elf - ;; - or32-*) - os=coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=sysv3 - ;; - sparc-* | *-sun) - os=sunos4.1.1 - ;; - pru-*) - os=elf - ;; - *-be) - os=beos - ;; - *-ibm) - os=aix - ;; - *-knuth) - os=mmixware - ;; - *-wec) - os=proelf - ;; - *-winbond) - os=proelf - ;; - *-oki) - os=proelf - ;; - *-hp) - os=hpux - ;; - *-hitachi) - os=hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=sysv - ;; - *-cbm) - os=amigaos - ;; - *-dg) - os=dgux - ;; - *-dolphin) - os=sysv3 - ;; - m68k-ccur) - os=rtu - ;; - m88k-omron*) - os=luna - ;; - *-next) - os=nextstep - ;; - *-sequent) - os=ptx - ;; - *-crds) - os=unos - ;; - *-ns) - os=genix - ;; - i370-*) - os=mvs - ;; - *-gould) - os=sysv - ;; - *-highlevel) - os=bsd - ;; - *-encore) - os=bsd - ;; - *-sgi) - os=irix - ;; - *-siemens) - os=sysv4 - ;; - *-masscomp) - os=rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=uxpv - ;; - *-rom68k) - os=coff - ;; - *-*bug) - os=coff - ;; - *-apple) - os=macos - ;; - *-atari*) - os=mint - ;; - *-wrs) - os=vxworks - ;; - *) - os=none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -case $vendor in - unknown) - case $os in - riscix*) - vendor=acorn - ;; - sunos*) - vendor=sun - ;; - cnk*|-aix*) - vendor=ibm - ;; - beos*) - vendor=be - ;; - hpux*) - vendor=hp - ;; - mpeix*) - vendor=hp - ;; - hiux*) - vendor=hitachi - ;; - unos*) - vendor=crds - ;; - dgux*) - vendor=dg - ;; - luna*) - vendor=omron - ;; - genix*) - vendor=ns - ;; - clix*) - vendor=intergraph - ;; - mvs* | opened*) - vendor=ibm - ;; - os400*) - vendor=ibm - ;; - ptx*) - vendor=sequent - ;; - tpf*) - vendor=ibm - ;; - vxsim* | vxworks* | windiss*) - vendor=wrs - ;; - aux*) - vendor=apple - ;; - hms*) - vendor=hitachi - ;; - mpw* | macos*) - vendor=apple - ;; - *mint | mint[0-9]* | *MiNT | MiNT[0-9]*) - vendor=atari - ;; - vos*) - vendor=stratus - ;; - esac - ;; -esac - -echo "$cpu-$vendor-$os" -exit - -# Local variables: -# eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/readline/support/install.sh b/readline/support/install.sh deleted file mode 100755 index 0cac004e6d..0000000000 --- a/readline/support/install.sh +++ /dev/null @@ -1,247 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# This comes from X11R5. -# -# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ -# -# Copyright 1991 by the Massachusetts Institute of Technology -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -tranformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/readline/support/mkdirs b/readline/support/mkdirs deleted file mode 100755 index 46f656eaff..0000000000 --- a/readline/support/mkdirs +++ /dev/null @@ -1,47 +0,0 @@ -#! /bin/sh -# -# mkdirs - a work-alike for `mkdir -p' -# -# Chet Ramey -# chet@po.cwru.edu - -# Copyright (C) 1996-2002 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - -for dir -do - - test -d "$dir" && continue - - tomake=$dir - while test -n "$dir" ; do - # dir=${dir%/*} - # dir=`expr "$dir" ':' '\(/.*\)/[^/]*'` - if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then - tomake="$dir $tomake" - else - dir= - fi - done - - for d in $tomake - do - test -d "$d" && continue - echo mkdir "$d" - mkdir "$d" - done -done - -exit 0 diff --git a/readline/support/mkdist b/readline/support/mkdist deleted file mode 100755 index 282431d4ad..0000000000 --- a/readline/support/mkdist +++ /dev/null @@ -1,129 +0,0 @@ -#! /bin/bash - -# -# mkdist - make a distribution directory from a master manifest file -# -# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version -# -# SRCDIR defaults to src -# MANIFEST defaults to $SRCDIR/MANIFEST -# -# Chet Ramey -# chet@po.cwru.edu - -# Copyright (C) 1996-2002 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -SRCDIR=src -ROOTNAME=bash - -usage() -{ - echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-t] [-v] version 1>&2 - exit 2 -} - -vmsg() -{ - if [ -n "$verbose" ]; then - echo mkdist: "$@" - fi -} - -while getopts m:s:r:tv name -do - case $name in - m) MANIFEST=$OPTARG ;; - s) SRCDIR=$OPTARG ;; - r) ROOTNAME=$OPTARG ;; - t) maketar=yes ;; - v) verbose=yes ;; - ?) usage ;; - esac -done - -: ${MANIFEST:=$SRCDIR/MANIFEST} - -vmsg using $MANIFEST - -shift $(( $OPTIND - 1 )) - -if [ $# -lt 1 ]; then - usage -fi - -version=$1 -newdir=${ROOTNAME}-$version - -tarfile=${newdir}.tar - -vmsg creating distribution for $ROOTNAME version $version in $newdir - -if [ ! -d $newdir ]; then - mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; } -fi - -dirmode=755 -filmode=644 - -while read fname type mode -do - [ -z "$fname" ] && continue - - case "$fname" in - \#*) continue ;; - esac - - case "$type" in - d) mkdir $newdir/$fname ;; - f) cp -p $SRCDIR/$fname $newdir/$fname ;; - s) ln -s $mode $newdir/$fname ; mode= ;; # symlink - l) ln $mode $newdir/$fname ; mode= ;; # hard link - *) echo "unknown file type $type" 1>&2 ;; - esac - - if [ -n "$mode" ]; then - chmod $mode $newdir/$fname - fi - -done < $MANIFEST - -# cut off the `-alpha' in something like `2.0-alpha', leaving just the -# numeric version -#version=${version%%-*} - -#case "$version" in -#*.*.*) vers=${version%.*} ;; -#*.*) vers=${version} ;; -#esac - -#echo $vers > $newdir/.distribution - -#case "$version" in -#*.*.*) plevel=${version##*.} ;; -#*) plevel=0 ;; -#esac -#[ -z "$plevel" ] && plevel=0 -#echo ${plevel} > $newdir/.patchlevel - -vmsg $newdir created - -if [ -n "$maketar" ]; then - tar cf ${tarfile} $newdir - gzip $tarfile - vmsg ${tarfile}.gz created -fi - -exit 0 diff --git a/readline/support/mkinstalldirs b/readline/support/mkinstalldirs deleted file mode 100755 index d2d5f21b61..0000000000 --- a/readline/support/mkinstalldirs +++ /dev/null @@ -1,111 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -errstatus=0 -dirmode="" - -usage="\ -Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..." - -# process command line arguments -while test $# -gt 0 ; do - case $1 in - -h | --help | --h*) # -h for help - echo "$usage" 1>&2 - exit 0 - ;; - -m) # -m PERM arg - shift - test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } - dirmode=$1 - shift - ;; - --) # stop option processing - shift - break - ;; - -*) # unknown option - echo "$usage" 1>&2 - exit 1 - ;; - *) # first non-opt arg - break - ;; - esac -done - -for file -do - if test -d "$file"; then - shift - else - break - fi -done - -case $# in - 0) exit 0 ;; -esac - -case $dirmode in - '') - if mkdir -p -- . 2>/dev/null; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - fi - ;; - *) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - fi - ;; -esac - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case $pathcomp in - -*) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# End: -# mkinstalldirs ends here diff --git a/readline/support/shlib-install b/readline/support/shlib-install deleted file mode 100755 index f4eea278fa..0000000000 --- a/readline/support/shlib-install +++ /dev/null @@ -1,206 +0,0 @@ -#! /bin/sh -# -# shlib-install - install a shared library and do any necessary host-specific -# post-installation configuration (like ldconfig) -# -# usage: shlib-install [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library -# -# Chet Ramey -# chet@po.cwru.edu - -# -# defaults -# -INSTALLDIR=/usr/local/lib -LDCONFIG=ldconfig - -PROGNAME=`basename $0` -USAGE="$PROGNAME [-D] -O host_os [-V host_vendor] -d installation-dir [-b bin-dir] -i install-prog [-U] library" - -# process options - -while [ $# -gt 0 ]; do - case "$1" in - -O) shift; host_os="$1"; shift ;; - -V) shift; host_vendor="$1"; shift ;; - -d) shift; INSTALLDIR="$1"; shift ;; - -b) shift; BINDIR="$1" ; shift ;; - -i) shift; INSTALLPROG="$1" ; shift ;; - -D) echo=echo ; shift ;; - -U) uninstall=true ; shift ;; - -*) echo "$USAGE" >&2 ; exit 2;; - *) break ;; - esac -done - -# set install target name -LIBNAME="$1" - -if [ -z "$LIBNAME" ]; then - echo "$USAGE" >&2 - exit 2 -fi - -OLDSUFF=old -MV=mv -RM="rm -f" -LN="ln -s" - -# pre-install - -if [ -z "$uninstall" ]; then - ${echo} $RM ${INSTALLDIR}/${LIBNAME}.${OLDSUFF} - if [ -f "$INSTALLDIR/$LIBNAME" ]; then - ${echo} $MV $INSTALLDIR/$LIBNAME ${INSTALLDIR}/${LIBNAME}.${OLDSUFF} - fi -fi - -# install/uninstall - -if [ -z "$uninstall" ] ; then - ${echo} eval ${INSTALLPROG} $LIBNAME ${INSTALLDIR}/${LIBNAME} -else - ${echo} ${RM} ${INSTALLDIR}/${LIBNAME} -fi - -# post-install/uninstall - -# HP-UX and Darwin/MacOS X require that a shared library have execute permission -# Linux does, too, and ldd warns about it. Solaris doesn't seem to mind, -# but ldd still warns about it. -# Cygwin installs both a dll (which must go in $BINDIR) and an implicit -# link library (in $libdir) -case "$host_os" in -hpux*|darwin*|macosx*|linux*|solaris2*) - if [ -z "$uninstall" ]; then - chmod 755 ${INSTALLDIR}/${LIBNAME} - fi ;; -cygwin*|mingw*) - IMPLIBNAME=`echo ${LIBNAME} \ - | sed -e 's,^cyg,lib,' -e 's,[0-9]*.dll$,.dll.a,'` - if [ -z "$uninstall" ]; then - ${echo} $RM ${BINDIR}/${LIBNAME}.${OLDSUFF} - if [ -f "$BINDIR/$LIBNAME" ]; then - ${echo} $MV $BINDIR/$LIBNAME $BINDIR/$LIBNAME.$OLDSUFF - fi - ${echo} $MV ${INSTALLDIR}/${LIBNAME} ${BINDIR}/${LIBNAME} - ${echo} chmod a+x ${BINDIR}/${LIBNAME} - ${echo} eval ${INSTALLPROG} ${LIBNAME}.a \ - ${INSTALLDIR}/${IMPLIBNAME} - else - ${echo} ${RM} ${BINDIR}/${LIBNAME} - ${echo} ${RM} ${INSTALLDIR}/${IMPLIBNAME} - fi ;; - -*) ;; -esac - -case "$LIBNAME" in -*.*.[0-9].[0-9]) # libname.so.M.N - LINK2=`echo $LIBNAME | sed 's:\(.*\..*\.[0-9]\)\.[0-9]:\1:'` # libname.so.M - LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]\.[0-9]:\1:'` # libname.so - ;; -*.*.[0-9]) # libname.so.M - LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]:\1:'` # libname.so - ;; -*.[0-9]) # libname.M - LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]:\1:'` # libname - ;; -*.[0-9].[0-9].dylib) # libname.M.N.dylib - LINK2=`echo $LIBNAME | sed 's:\(.*\.[0-9]\)\.[0-9]:\1:'` # libname.M.dylib - LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]\.[0-9]:\1:'` # libname.dylib -esac - -INSTALL_LINK1='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK1' -INSTALL_LINK2='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK2' - -# -# Create symlinks to the installed library. This section is incomplete. -# -case "$host_os-$host_vendor" in -*linux*|freebsd*-gentoo) - # libname.so.M -> libname.so.M.N - ${echo} ${RM} ${INSTALLDIR}/$LINK2 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK2 - fi - - # libname.so -> libname.so.M - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - ${echo} cd $INSTALLDIR && ${echo} ${LN} $LINK2 $LINK1 - fi - ;; - -bsdi4*|*gnu*|darwin*|macosx*|netbsd*|mirbsd*) - # libname.so.M -> libname.so.M.N - ${echo} ${RM} ${INSTALLDIR}/$LINK2 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK2 - fi - - # libname.so -> libname.so.M.N - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - ;; - -solaris2*|aix4.[2-9]*|aix[5-9]*|osf*|irix[56]*|sysv[45]*|dgux*|interix*) - # libname.so -> libname.so.M - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - ;; - - -# FreeBSD 3.x and above can have either a.out or ELF shared libraries -freebsd3*|freebsdaout*) - if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then - # libname.so -> libname.so.M - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - else - # libname.so.M -> libname.so.M.N - ${echo} ${RM} ${INSTALLDIR}/$LINK2 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK2 - fi - - # libname.so -> libname.so.M.N - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - fi - ;; - -freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*) - # libname.so -> libname.so.M - ${echo} ${RM} ${INSTALLDIR}/$LINK1 - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - ;; - -hpux1*) - # libname.sl -> libname.M - ${echo} ${RM} ${INSTALLDIR}/$LINK1.sl - if [ -z "$uninstall" ]; then - eval $INSTALL_LINK1 - fi - ;; - -cygwin*|mingw*) - # Links to .dlls don't work. Hence shobj-conf used DLLVERSION.dll - # instead of so.SHLIB_MAJOR.SHLIB_MINOR. The postinstall above - # took care of everything else. - ;; - -*) ;; -esac - -exit 0 diff --git a/readline/support/shobj-conf b/readline/support/shobj-conf deleted file mode 100755 index 7920f1b5cb..0000000000 --- a/readline/support/shobj-conf +++ /dev/null @@ -1,594 +0,0 @@ -#! /bin/sh -# -# shobj-conf -- output a series of variable assignments to be substituted -# into a Makefile by configure which specify system-dependent -# information for creating shared objects that may be loaded -# into bash with `enable -f' -# -# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor -# -# Chet Ramey -# chet@po.cwru.edu - -# Copyright (C) 1996-2014 Free Software Foundation, Inc. -# -# This file is part of GNU Bash, the Bourne Again SHell. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -# -# defaults -# -SHOBJ_STATUS=supported -SHLIB_STATUS=supported - -SHOBJ_CC=cc -SHOBJ_CFLAGS= -SHOBJ_LD= -SHOBJ_LDFLAGS= -SHOBJ_XLDFLAGS= -SHOBJ_LIBS= - -SHLIB_XLDFLAGS= -SHLIB_LIBS= - -SHLIB_DOT='.' -SHLIB_LIBPREF='lib' -SHLIB_LIBSUFF='so' - -SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)' -SHLIB_DLLVERSION='$(SHLIB_MAJOR)' - -PROGNAME=`basename $0` -USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor" - -while [ $# -gt 0 ]; do - case "$1" in - -C) shift; SHOBJ_CC="$1"; shift ;; - -c) shift; host_cpu="$1"; shift ;; - -o) shift; host_os="$1"; shift ;; - -v) shift; host_vendor="$1"; shift ;; - *) echo "$USAGE" >&2 ; exit 2;; - esac -done - -case "${host_os}-${SHOBJ_CC}-${host_vendor}" in -nsk-cc-tandem) - SHOBJ_CFLAGS=-Wglobalized - case `uname -m` in - NSR*) - SHOBJ_CFLAGS="${SHOBJ_CFLAGS} -Wcall_shared" # default on TNS/E, needed on TNS/R - SHOBJ_LD=/usr/bin/ld # for TNS/R - ;; - NSE*|NEO*) - SHOBJ_LD=/usr/bin/eld - ;; - esac - SHOBJ_LDFLAGS='-shared -bglobalized -unres_symbols ignore' - ;; - -sunos4*-*gcc*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD=/usr/bin/ld - SHOBJ_LDFLAGS='-assert pure-text' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -sunos4*) - SHOBJ_CFLAGS=-pic - SHOBJ_LD=/usr/bin/ld - SHOBJ_LDFLAGS='-assert pure-text' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -sunos5*-*gcc*|solaris2*-*gcc*) - SHOBJ_LD='${CC}' - ld_used=`gcc -print-prog-name=ld` - if ${ld_used} -V 2>&1 | grep GNU >/dev/null 2>&1; then - # This line works for the GNU ld - SHOBJ_LDFLAGS='-shared -Wl,-h,$@' - # http://sourceware.org/ml/binutils/2001-08/msg00361.html - SHOBJ_CFLAGS=-fPIC - else - # This line works for the Solaris linker in /usr/ccs/bin/ld - SHOBJ_LDFLAGS='-shared -Wl,-i -Wl,-h,$@' - SHOBJ_CFLAGS=-fpic - fi - -# SHLIB_XLDFLAGS='-R $(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sunos5*|solaris2*) - SHOBJ_CFLAGS='-K pic' - SHOBJ_LD=/usr/ccs/bin/ld - SHOBJ_LDFLAGS='-G -dy -z text -i -h $@' - -# SHLIB_XLDFLAGS='-R $(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -# All versions of Linux (including Gentoo/FreeBSD) or the semi-mythical GNU Hurd. -linux*-*|gnu*-*|k*bsd*-gnu-*|freebsd*-gentoo) - SHOBJ_CFLAGS=-fPIC - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - - SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir) -Wl,-soname,`basename $@ $(SHLIB_MINOR)`' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -freebsd2*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-x -Bshareable' - - SHLIB_XLDFLAGS='-R$(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -# FreeBSD-3.x ELF -freebsd3*|freebsdaout*) - SHOBJ_CFLAGS=-fPIC - SHOBJ_LD='${CC}' - - if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - - SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - else - SHOBJ_LDFLAGS='-shared' - - SHLIB_XLDFLAGS='-R$(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - fi - ;; - -# FreeBSD-4.x and later have only ELF -freebsd[4-9]*|freebsd1[0-9]*|freebsdelf*|dragonfly*) - SHOBJ_CFLAGS=-fPIC - SHOBJ_LD='${CC}' - - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -# Darwin/MacOS X -darwin*) - # Common definitions for all darwin/mac os x versions - SHOBJ_CFLAGS='-fno-common' - - SHOBJ_LD='${CC}' - - SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)' - SHLIB_LIBSUFF='dylib' - - # unused at this time - SHLIB_SONAME='$(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF)' - - case "${host_os}" in - # Darwin versions 1, 5, 6, 7 correspond to Mac OS X 10.0, 10.1, 10.2, - # and 10.3, respectively. - darwin[1-7].*) - SHOBJ_STATUS=unsupported - SHOBJ_LDFLAGS='-dynamic' - SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v' - ;; - # Darwin 8 == Mac OS X 10.4; Mac OS X 10.N == Darwin N+4 - *) - case "${host_os}" in - darwin[89]*|darwin1[012]*) - SHOBJ_ARCHFLAGS='-arch_only `/usr/bin/arch`' - ;; - *) # Mac OS X 10.9 (Mavericks) and later - SHOBJ_ARCHFLAGS= - # for 32 and 64bit universal library - #SHOBJ_ARCHFLAGS='-arch i386 -arch x86_64' - #SHOBJ_CFLAGS=${SHOBJ_CFLAGS}' -arch i386 -arch x86_64' - ;; - esac - SHOBJ_LDFLAGS="-dynamiclib -dynamic -undefined dynamic_lookup ${SHOBJ_ARCHFLAGS}" - SHLIB_XLDFLAGS="-dynamiclib ${SHOBJ_ARCHFLAGS}"' -install_name $(libdir)/`echo $@ | sed "s:\\..*::"`.$(SHLIB_MAJOR).$(SHLIB_LIBSUFF) -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -v' - ;; - esac - - SHLIB_LIBS='-lncurses' # see if -lcurses works on MacOS X 10.1 - ;; - -openbsd*|netbsd*|mirbsd*) - SHOBJ_CFLAGS=-fPIC - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_XLDFLAGS='-R$(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -bsdi2*) - SHOBJ_CC=shlicc2 - SHOBJ_CFLAGS= - SHOBJ_LD=ld - SHOBJ_LDFLAGS=-r - SHOBJ_LIBS=-lc_s.2.1.0 - - # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in - # the ass -- they require changing {/usr/lib,etc}/shlib.map on - # each system, and the library creation process is byzantine - SHLIB_STATUS=unsupported - ;; - -bsdi3*) - SHOBJ_CC=shlicc2 - SHOBJ_CFLAGS= - SHOBJ_LD=ld - SHOBJ_LDFLAGS=-r - SHOBJ_LIBS=-lc_s.3.0.0 - - # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in - # the ass -- they require changing {/usr/lib,etc}/shlib.map on - # each system, and the library creation process is byzantine - SHLIB_STATUS=unsupported - ;; - -bsdi4*) - # BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked - # shared libraries. gcc 2.x is the standard compiler, and the - # `normal' gcc options should work as they do in Linux. - - SHOBJ_CFLAGS=-fPIC - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - - SHLIB_XLDFLAGS='-Wl,-soname,`basename $@ $(SHLIB_MINOR)`' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)' - ;; - -osf*-*gcc*) - # Fix to use gcc linker driver from bfischer@TechFak.Uni-Bielefeld.DE - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - - SHLIB_XLDFLAGS='-rpath $(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -osf*) - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"' - - SHLIB_XLDFLAGS='-rpath $(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -aix4.[2-9]*-*gcc*|aix[5-9].*-*gcc*) # lightly tested by jik@cisco.com - SHOBJ_CFLAGS=-fpic - SHOBJ_LD='ld' - SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall' - SHOBJ_XLDFLAGS='-G' - - SHLIB_XLDFLAGS='-bM:SRE' - SHLIB_LIBS='-lcurses -lc' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -aix4.[2-9]*|aix[5-9].*) - SHOBJ_CFLAGS=-K - SHOBJ_LD='ld' - SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall' - SHOBJ_XLDFLAGS='-G' - - SHLIB_XLDFLAGS='-bM:SRE' - SHLIB_LIBS='-lcurses -lc' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -# -# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface -# -irix[56]*-*gcc*) - SHOBJ_CFLAGS='-fpic' - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared -Wl,-soname,$@' - - SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -irix[56]*) - SHOBJ_CFLAGS='-K PIC' - SHOBJ_LD=ld -# SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@' -# Change from David Kaelbling . If you have problems, -# remove the `-no_unresolved' - SHOBJ_LDFLAGS='-shared -no_unresolved -soname $@' - - SHLIB_XLDFLAGS='-rpath $(libdir)' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -hpux9*-*gcc*) - # must use gcc; the bundled cc cannot compile PIC code - SHOBJ_CFLAGS='-fpic' - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s' - - SHLIB_XLDFLAGS='-Wl,+b,$(libdir)' - SHLIB_LIBSUFF='sl' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -hpux9*) - SHOBJ_STATUS=unsupported - SHLIB_STATUS=unsupported - - # If you are using the HP ANSI C compiler, you can uncomment and use - # this code (I have not tested it) -# SHOBJ_STATUS=supported -# SHLIB_STATUS=supported -# -# SHOBJ_CFLAGS='+z' -# SHOBJ_LD='ld' -# SHOBJ_LDFLAGS='-b +s' -# -# SHLIB_XLDFLAGS='+b $(libdir)' -# SHLIB_LIBSUFF='sl' -# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - - ;; - -hpux10*-*gcc*) - # must use gcc; the bundled cc cannot compile PIC code - SHOBJ_CFLAGS='-fpic' - SHOBJ_LD='${CC}' - # if you have problems linking here, moving the `-Wl,+h,$@' from - # SHLIB_XLDFLAGS to SHOBJ_LDFLAGS has been reported to work - SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s' - - SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)' - SHLIB_LIBSUFF='sl' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -hpux10*) - SHOBJ_STATUS=unsupported - SHLIB_STATUS=unsupported - - # If you are using the HP ANSI C compiler, you can uncomment and use - # this code (I have not tested it) -# SHOBJ_STATUS=supported -# SHLIB_STATUS=supported -# -# SHOBJ_CFLAGS='+z' -# SHOBJ_LD='ld' -# SHOBJ_LDFLAGS='-b +s +h $@' -# -# SHLIB_XLDFLAGS='+b $(libdir)' -# SHLIB_LIBSUFF='sl' -# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - - ;; - -hpux11*-*gcc*) - # must use gcc; the bundled cc cannot compile PIC code - SHOBJ_CFLAGS='-fpic' - SHOBJ_LD='${CC}' -# SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@' - SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s -Wl,+h,$@' - - SHLIB_XLDFLAGS='-Wl,+b,$(libdir)' - SHLIB_LIBSUFF='sl' - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -hpux11*) - SHOBJ_STATUS=unsupported - SHLIB_STATUS=unsupported - - # If you are using the HP ANSI C compiler, you can uncomment and use - # this code (I have not tested it) -# SHOBJ_STATUS=supported -# SHLIB_STATUS=supported -# -# SHOBJ_CFLAGS='+z' -# SHOBJ_LD='ld' -# SHOBJ_LDFLAGS='-b +s +h $@' -# -# SHLIB_XLDFLAGS='+b $(libdir)' -# SHLIB_LIBSUFF='sl' -# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - - ;; - -sysv4*-*gcc*) - SHOBJ_CFLAGS=-shared - SHOBJ_LDFLAGS='-shared -h $@' - SHOBJ_LD='${CC}' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv4*) - SHOBJ_CFLAGS='-K PIC' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-dy -z text -G -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sco3.2v5*-*gcc*) - SHOBJ_CFLAGS='-fpic' # DEFAULTS TO ELF - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sco3.2v5*) - SHOBJ_CFLAGS='-K pic -b elf' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5uw7*-*gcc*) - SHOBJ_CFLAGS='-fpic' - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5uw7*) - SHOBJ_CFLAGS='-K PIC' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-G -dy -z text -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5UnixWare*-*gcc*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5UnixWare*) - SHOBJ_CFLAGS='-K PIC' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-G -dy -z text -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5OpenUNIX*-*gcc*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -sysv5OpenUNIX*) - SHOBJ_CFLAGS='-K PIC' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-G -dy -z text -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -dgux*-*gcc*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -dgux*) - SHOBJ_CFLAGS='-K pic' - SHOBJ_LD=ld - SHOBJ_LDFLAGS='-G -dy -h $@' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -msdos*) - SHOBJ_STATUS=unsupported - SHLIB_STATUS=unsupported - ;; - -cygwin*) - SHOBJ_LD='$(CC)' - SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a' - SHLIB_LIBPREF='cyg' - SHLIB_LIBSUFF='dll' - SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)' - SHLIB_LIBS='$(TERMCAP_LIB)' - - SHLIB_DOT= - # For official cygwin releases, DLLVERSION will be defined in the - # environment of configure, and will be incremented any time the API - # changes in a non-backwards compatible manner. Otherwise, it is just - # SHLIB_MAJOR. - if [ -n "$DLLVERSION" ] ; then - SHLIB_DLLVERSION="$DLLVERSION" - fi - ;; - -mingw*) - SHOBJ_LD='$(CC)' - SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a' - SHLIB_LIBSUFF='dll' - SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)' - SHLIB_LIBS='$(TERMCAP_LIB)' - - SHLIB_DOT= - # For official cygwin releases, DLLVERSION will be defined in the - # environment of configure, and will be incremented any time the API - # changes in a non-backwards compatible manner. Otherwise, it is just - # SHLIB_MAJOR. - if [ -n "$DLLVERSION" ] ; then - SHLIB_DLLVERSION="$DLLVERSION" - fi - ;; - -# -# Rely on correct gcc configuration for everything else -# -*-*gcc*) - SHOBJ_CFLAGS=-fpic - SHOBJ_LD='${CC}' - SHOBJ_LDFLAGS='-shared' - - SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)' - ;; - -*) - SHOBJ_STATUS=unsupported - SHLIB_STATUS=unsupported - ;; - -esac - -echo SHOBJ_CC=\'"$SHOBJ_CC"\' -echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\' -echo SHOBJ_LD=\'"$SHOBJ_LD"\' -echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\' -echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\' -echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\' - -echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\' -echo SHLIB_LIBS=\'"$SHLIB_LIBS"\' - -echo SHLIB_DOT=\'"$SHLIB_DOT"\' - -echo SHLIB_LIBPREF=\'"$SHLIB_LIBPREF"\' -echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\' - -echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\' -echo SHLIB_DLLVERSION=\'"$SHLIB_DLLVERSION"\' - -echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\' -echo SHLIB_STATUS=\'"$SHLIB_STATUS"\' - -exit 0 diff --git a/readline/support/wcwidth.c b/readline/support/wcwidth.c deleted file mode 100644 index 0f5ec99579..0000000000 --- a/readline/support/wcwidth.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - * This is an implementation of wcwidth() and wcswidth() (defined in - * IEEE Std 1002.1-2001) for Unicode. - * - * http://www.opengroup.org/onlinepubs/007904975/functions/wcwidth.html - * http://www.opengroup.org/onlinepubs/007904975/functions/wcswidth.html - * - * In fixed-width output devices, Latin characters all occupy a single - * "cell" position of equal width, whereas ideographic CJK characters - * occupy two such cells. Interoperability between terminal-line - * applications and (teletype-style) character terminals using the - * UTF-8 encoding requires agreement on which character should advance - * the cursor by how many cell positions. No established formal - * standards exist at present on which Unicode character shall occupy - * how many cell positions on character terminals. These routines are - * a first attempt of defining such behavior based on simple rules - * applied to data provided by the Unicode Consortium. - * - * For some graphical characters, the Unicode standard explicitly - * defines a character-cell width via the definition of the East Asian - * FullWidth (F), Wide (W), Half-width (H), and Narrow (Na) classes. - * In all these cases, there is no ambiguity about which width a - * terminal shall use. For characters in the East Asian Ambiguous (A) - * class, the width choice depends purely on a preference of backward - * compatibility with either historic CJK or Western practice. - * Choosing single-width for these characters is easy to justify as - * the appropriate long-term solution, as the CJK practice of - * displaying these characters as double-width comes from historic - * implementation simplicity (8-bit encoded characters were displayed - * single-width and 16-bit ones double-width, even for Greek, - * Cyrillic, etc.) and not any typographic considerations. - * - * Much less clear is the choice of width for the Not East Asian - * (Neutral) class. Existing practice does not dictate a width for any - * of these characters. It would nevertheless make sense - * typographically to allocate two character cells to characters such - * as for instance EM SPACE or VOLUME INTEGRAL, which cannot be - * represented adequately with a single-width glyph. The following - * routines at present merely assign a single-cell width to all - * neutral characters, in the interest of simplicity. This is not - * entirely satisfactory and should be reconsidered before - * establishing a formal standard in this area. At the moment, the - * decision which Not East Asian (Neutral) characters should be - * represented by double-width glyphs cannot yet be answered by - * applying a simple rule from the Unicode database content. Setting - * up a proper standard for the behavior of UTF-8 character terminals - * will require a careful analysis not only of each Unicode character, - * but also of each presentation form, something the author of these - * routines has avoided to do so far. - * - * http://www.unicode.org/unicode/reports/tr11/ - * - * Markus Kuhn -- 2007-05-26 (Unicode 5.0) - * - * Permission to use, copy, modify, and distribute this software - * for any purpose and without fee is hereby granted. The author - * disclaims all warranties with regard to this software. - * - * Latest version: http://www.cl.cam.ac.uk/~mgk25/ucs/wcwidth.c - */ - -#ifdef __GO32__ -# include -#endif - -#include - -struct interval { - int first; - int last; -}; - -/* auxiliary function for binary search in interval table */ -static int bisearch(wchar_t ucs, const struct interval *table, int max) { - int min = 0; - int mid; - - if (ucs < table[0].first || ucs > table[max].last) - return 0; - while (max >= min) { - mid = (min + max) / 2; - if (ucs > table[mid].last) - min = mid + 1; - else if (ucs < table[mid].first) - max = mid - 1; - else - return 1; - } - - return 0; -} - - -/* The following two functions define the column width of an ISO 10646 - * character as follows: - * - * - The null character (U+0000) has a column width of 0. - * - * - Other C0/C1 control characters and DEL will lead to a return - * value of -1. - * - * - Non-spacing and enclosing combining characters (general - * category code Mn or Me in the Unicode database) have a - * column width of 0. - * - * - SOFT HYPHEN (U+00AD) has a column width of 1. - * - * - Other format characters (general category code Cf in the Unicode - * database) and ZERO WIDTH SPACE (U+200B) have a column width of 0. - * - * - Hangul Jamo medial vowels and final consonants (U+1160-U+11FF) - * have a column width of 0. - * - * - Spacing characters in the East Asian Wide (W) or East Asian - * Full-width (F) category as defined in Unicode Technical - * Report #11 have a column width of 2. - * - * - All remaining characters (including all printable - * ISO 8859-1 and WGL4 characters, Unicode control characters, - * etc.) have a column width of 1. - * - * This implementation assumes that wchar_t characters are encoded - * in ISO 10646. - */ - -int mk_wcwidth(wchar_t ucs) -{ - /* sorted list of non-overlapping intervals of non-spacing characters */ - /* generated by "uniset +cat=Me +cat=Mn +cat=Cf -00AD +1160-11FF +200B c" */ - static const struct interval combining[] = { - { 0x0300, 0x036F }, { 0x0483, 0x0486 }, { 0x0488, 0x0489 }, - { 0x0591, 0x05BD }, { 0x05BF, 0x05BF }, { 0x05C1, 0x05C2 }, - { 0x05C4, 0x05C5 }, { 0x05C7, 0x05C7 }, { 0x0600, 0x0603 }, - { 0x0610, 0x0615 }, { 0x064B, 0x065E }, { 0x0670, 0x0670 }, - { 0x06D6, 0x06E4 }, { 0x06E7, 0x06E8 }, { 0x06EA, 0x06ED }, - { 0x070F, 0x070F }, { 0x0711, 0x0711 }, { 0x0730, 0x074A }, - { 0x07A6, 0x07B0 }, { 0x07EB, 0x07F3 }, { 0x0901, 0x0902 }, - { 0x093C, 0x093C }, { 0x0941, 0x0948 }, { 0x094D, 0x094D }, - { 0x0951, 0x0954 }, { 0x0962, 0x0963 }, { 0x0981, 0x0981 }, - { 0x09BC, 0x09BC }, { 0x09C1, 0x09C4 }, { 0x09CD, 0x09CD }, - { 0x09E2, 0x09E3 }, { 0x0A01, 0x0A02 }, { 0x0A3C, 0x0A3C }, - { 0x0A41, 0x0A42 }, { 0x0A47, 0x0A48 }, { 0x0A4B, 0x0A4D }, - { 0x0A70, 0x0A71 }, { 0x0A81, 0x0A82 }, { 0x0ABC, 0x0ABC }, - { 0x0AC1, 0x0AC5 }, { 0x0AC7, 0x0AC8 }, { 0x0ACD, 0x0ACD }, - { 0x0AE2, 0x0AE3 }, { 0x0B01, 0x0B01 }, { 0x0B3C, 0x0B3C }, - { 0x0B3F, 0x0B3F }, { 0x0B41, 0x0B43 }, { 0x0B4D, 0x0B4D }, - { 0x0B56, 0x0B56 }, { 0x0B82, 0x0B82 }, { 0x0BC0, 0x0BC0 }, - { 0x0BCD, 0x0BCD }, { 0x0C3E, 0x0C40 }, { 0x0C46, 0x0C48 }, - { 0x0C4A, 0x0C4D }, { 0x0C55, 0x0C56 }, { 0x0CBC, 0x0CBC }, - { 0x0CBF, 0x0CBF }, { 0x0CC6, 0x0CC6 }, { 0x0CCC, 0x0CCD }, - { 0x0CE2, 0x0CE3 }, { 0x0D41, 0x0D43 }, { 0x0D4D, 0x0D4D }, - { 0x0DCA, 0x0DCA }, { 0x0DD2, 0x0DD4 }, { 0x0DD6, 0x0DD6 }, - { 0x0E31, 0x0E31 }, { 0x0E34, 0x0E3A }, { 0x0E47, 0x0E4E }, - { 0x0EB1, 0x0EB1 }, { 0x0EB4, 0x0EB9 }, { 0x0EBB, 0x0EBC }, - { 0x0EC8, 0x0ECD }, { 0x0F18, 0x0F19 }, { 0x0F35, 0x0F35 }, - { 0x0F37, 0x0F37 }, { 0x0F39, 0x0F39 }, { 0x0F71, 0x0F7E }, - { 0x0F80, 0x0F84 }, { 0x0F86, 0x0F87 }, { 0x0F90, 0x0F97 }, - { 0x0F99, 0x0FBC }, { 0x0FC6, 0x0FC6 }, { 0x102D, 0x1030 }, - { 0x1032, 0x1032 }, { 0x1036, 0x1037 }, { 0x1039, 0x1039 }, - { 0x1058, 0x1059 }, { 0x1160, 0x11FF }, { 0x135F, 0x135F }, - { 0x1712, 0x1714 }, { 0x1732, 0x1734 }, { 0x1752, 0x1753 }, - { 0x1772, 0x1773 }, { 0x17B4, 0x17B5 }, { 0x17B7, 0x17BD }, - { 0x17C6, 0x17C6 }, { 0x17C9, 0x17D3 }, { 0x17DD, 0x17DD }, - { 0x180B, 0x180D }, { 0x18A9, 0x18A9 }, { 0x1920, 0x1922 }, - { 0x1927, 0x1928 }, { 0x1932, 0x1932 }, { 0x1939, 0x193B }, - { 0x1A17, 0x1A18 }, { 0x1B00, 0x1B03 }, { 0x1B34, 0x1B34 }, - { 0x1B36, 0x1B3A }, { 0x1B3C, 0x1B3C }, { 0x1B42, 0x1B42 }, - { 0x1B6B, 0x1B73 }, { 0x1DC0, 0x1DCA }, { 0x1DFE, 0x1DFF }, - { 0x200B, 0x200F }, { 0x202A, 0x202E }, { 0x2060, 0x2063 }, - { 0x206A, 0x206F }, { 0x20D0, 0x20EF }, { 0x302A, 0x302F }, - { 0x3099, 0x309A }, { 0xA806, 0xA806 }, { 0xA80B, 0xA80B }, - { 0xA825, 0xA826 }, { 0xFB1E, 0xFB1E }, { 0xFE00, 0xFE0F }, - { 0xFE20, 0xFE23 }, { 0xFEFF, 0xFEFF }, { 0xFFF9, 0xFFFB }, - { 0x10A01, 0x10A03 }, { 0x10A05, 0x10A06 }, { 0x10A0C, 0x10A0F }, - { 0x10A38, 0x10A3A }, { 0x10A3F, 0x10A3F }, { 0x1D167, 0x1D169 }, - { 0x1D173, 0x1D182 }, { 0x1D185, 0x1D18B }, { 0x1D1AA, 0x1D1AD }, - { 0x1D242, 0x1D244 }, { 0xE0001, 0xE0001 }, { 0xE0020, 0xE007F }, - { 0xE0100, 0xE01EF } - }; - - /* test for 8-bit control characters */ - if (ucs == 0) - return 0; - if (ucs < 32 || (ucs >= 0x7f && ucs < 0xa0)) - return -1; - - /* binary search in table of non-spacing characters */ - if (bisearch(ucs, combining, - sizeof(combining) / sizeof(struct interval) - 1)) - return 0; - - /* if we arrive here, ucs is not a combining or C0/C1 control character */ - - return 1 + - (ucs >= 0x1100 && - (ucs <= 0x115f || /* Hangul Jamo init. consonants */ - ucs == 0x2329 || ucs == 0x232a || - (ucs >= 0x2e80 && ucs <= 0xa4cf && - ucs != 0x303f) || /* CJK ... Yi */ - (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */ - (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Compatibility Ideographs */ - (ucs >= 0xfe10 && ucs <= 0xfe19) || /* Vertical forms */ - (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Compatibility Forms */ - (ucs >= 0xff00 && ucs <= 0xff60) || /* Fullwidth Forms */ - (ucs >= 0xffe0 && ucs <= 0xffe6) || - (ucs >= 0x20000 && ucs <= 0x2fffd) || - (ucs >= 0x30000 && ucs <= 0x3fffd))); -} - - -int mk_wcswidth(const wchar_t *pwcs, size_t n) -{ - int w, width = 0; - - for (;*pwcs && n-- > 0; pwcs++) - if ((w = mk_wcwidth(*pwcs)) < 0) - return -1; - else - width += w; - - return width; -} - - -/* - * The following functions are the same as mk_wcwidth() and - * mk_wcswidth(), except that spacing characters in the East Asian - * Ambiguous (A) category as defined in Unicode Technical Report #11 - * have a column width of 2. This variant might be useful for users of - * CJK legacy encodings who want to migrate to UCS without changing - * the traditional terminal character-width behaviour. It is not - * otherwise recommended for general use. - */ -int mk_wcwidth_cjk(wchar_t ucs) -{ - /* sorted list of non-overlapping intervals of East Asian Ambiguous - * characters, generated by "uniset +WIDTH-A -cat=Me -cat=Mn -cat=Cf c" */ - static const struct interval ambiguous[] = { - { 0x00A1, 0x00A1 }, { 0x00A4, 0x00A4 }, { 0x00A7, 0x00A8 }, - { 0x00AA, 0x00AA }, { 0x00AE, 0x00AE }, { 0x00B0, 0x00B4 }, - { 0x00B6, 0x00BA }, { 0x00BC, 0x00BF }, { 0x00C6, 0x00C6 }, - { 0x00D0, 0x00D0 }, { 0x00D7, 0x00D8 }, { 0x00DE, 0x00E1 }, - { 0x00E6, 0x00E6 }, { 0x00E8, 0x00EA }, { 0x00EC, 0x00ED }, - { 0x00F0, 0x00F0 }, { 0x00F2, 0x00F3 }, { 0x00F7, 0x00FA }, - { 0x00FC, 0x00FC }, { 0x00FE, 0x00FE }, { 0x0101, 0x0101 }, - { 0x0111, 0x0111 }, { 0x0113, 0x0113 }, { 0x011B, 0x011B }, - { 0x0126, 0x0127 }, { 0x012B, 0x012B }, { 0x0131, 0x0133 }, - { 0x0138, 0x0138 }, { 0x013F, 0x0142 }, { 0x0144, 0x0144 }, - { 0x0148, 0x014B }, { 0x014D, 0x014D }, { 0x0152, 0x0153 }, - { 0x0166, 0x0167 }, { 0x016B, 0x016B }, { 0x01CE, 0x01CE }, - { 0x01D0, 0x01D0 }, { 0x01D2, 0x01D2 }, { 0x01D4, 0x01D4 }, - { 0x01D6, 0x01D6 }, { 0x01D8, 0x01D8 }, { 0x01DA, 0x01DA }, - { 0x01DC, 0x01DC }, { 0x0251, 0x0251 }, { 0x0261, 0x0261 }, - { 0x02C4, 0x02C4 }, { 0x02C7, 0x02C7 }, { 0x02C9, 0x02CB }, - { 0x02CD, 0x02CD }, { 0x02D0, 0x02D0 }, { 0x02D8, 0x02DB }, - { 0x02DD, 0x02DD }, { 0x02DF, 0x02DF }, { 0x0391, 0x03A1 }, - { 0x03A3, 0x03A9 }, { 0x03B1, 0x03C1 }, { 0x03C3, 0x03C9 }, - { 0x0401, 0x0401 }, { 0x0410, 0x044F }, { 0x0451, 0x0451 }, - { 0x2010, 0x2010 }, { 0x2013, 0x2016 }, { 0x2018, 0x2019 }, - { 0x201C, 0x201D }, { 0x2020, 0x2022 }, { 0x2024, 0x2027 }, - { 0x2030, 0x2030 }, { 0x2032, 0x2033 }, { 0x2035, 0x2035 }, - { 0x203B, 0x203B }, { 0x203E, 0x203E }, { 0x2074, 0x2074 }, - { 0x207F, 0x207F }, { 0x2081, 0x2084 }, { 0x20AC, 0x20AC }, - { 0x2103, 0x2103 }, { 0x2105, 0x2105 }, { 0x2109, 0x2109 }, - { 0x2113, 0x2113 }, { 0x2116, 0x2116 }, { 0x2121, 0x2122 }, - { 0x2126, 0x2126 }, { 0x212B, 0x212B }, { 0x2153, 0x2154 }, - { 0x215B, 0x215E }, { 0x2160, 0x216B }, { 0x2170, 0x2179 }, - { 0x2190, 0x2199 }, { 0x21B8, 0x21B9 }, { 0x21D2, 0x21D2 }, - { 0x21D4, 0x21D4 }, { 0x21E7, 0x21E7 }, { 0x2200, 0x2200 }, - { 0x2202, 0x2203 }, { 0x2207, 0x2208 }, { 0x220B, 0x220B }, - { 0x220F, 0x220F }, { 0x2211, 0x2211 }, { 0x2215, 0x2215 }, - { 0x221A, 0x221A }, { 0x221D, 0x2220 }, { 0x2223, 0x2223 }, - { 0x2225, 0x2225 }, { 0x2227, 0x222C }, { 0x222E, 0x222E }, - { 0x2234, 0x2237 }, { 0x223C, 0x223D }, { 0x2248, 0x2248 }, - { 0x224C, 0x224C }, { 0x2252, 0x2252 }, { 0x2260, 0x2261 }, - { 0x2264, 0x2267 }, { 0x226A, 0x226B }, { 0x226E, 0x226F }, - { 0x2282, 0x2283 }, { 0x2286, 0x2287 }, { 0x2295, 0x2295 }, - { 0x2299, 0x2299 }, { 0x22A5, 0x22A5 }, { 0x22BF, 0x22BF }, - { 0x2312, 0x2312 }, { 0x2460, 0x24E9 }, { 0x24EB, 0x254B }, - { 0x2550, 0x2573 }, { 0x2580, 0x258F }, { 0x2592, 0x2595 }, - { 0x25A0, 0x25A1 }, { 0x25A3, 0x25A9 }, { 0x25B2, 0x25B3 }, - { 0x25B6, 0x25B7 }, { 0x25BC, 0x25BD }, { 0x25C0, 0x25C1 }, - { 0x25C6, 0x25C8 }, { 0x25CB, 0x25CB }, { 0x25CE, 0x25D1 }, - { 0x25E2, 0x25E5 }, { 0x25EF, 0x25EF }, { 0x2605, 0x2606 }, - { 0x2609, 0x2609 }, { 0x260E, 0x260F }, { 0x2614, 0x2615 }, - { 0x261C, 0x261C }, { 0x261E, 0x261E }, { 0x2640, 0x2640 }, - { 0x2642, 0x2642 }, { 0x2660, 0x2661 }, { 0x2663, 0x2665 }, - { 0x2667, 0x266A }, { 0x266C, 0x266D }, { 0x266F, 0x266F }, - { 0x273D, 0x273D }, { 0x2776, 0x277F }, { 0xE000, 0xF8FF }, - { 0xFFFD, 0xFFFD }, { 0xF0000, 0xFFFFD }, { 0x100000, 0x10FFFD } - }; - - /* binary search in table of non-spacing characters */ - if (bisearch(ucs, ambiguous, - sizeof(ambiguous) / sizeof(struct interval) - 1)) - return 2; - - return mk_wcwidth(ucs); -} - - -int mk_wcswidth_cjk(const wchar_t *pwcs, size_t n) -{ - int w, width = 0; - - for (;*pwcs && n-- > 0; pwcs++) - if ((w = mk_wcwidth_cjk(*pwcs)) < 0) - return -1; - else - width += w; - - return width; -} diff --git a/readline/tcap.h b/readline/tcap.h deleted file mode 100644 index 859e6eed5a..0000000000 --- a/readline/tcap.h +++ /dev/null @@ -1,60 +0,0 @@ -/* tcap.h -- termcap library functions and variables. */ - -/* Copyright (C) 1996-2015 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_RLTCAP_H_) -#define _RLTCAP_H_ - -#if defined (HAVE_CONFIG_H) -# include "config.h" -#endif - -#if defined (HAVE_TERMCAP_H) -# if defined (__linux__) && !defined (SPEED_T_IN_SYS_TYPES) -# include "rltty.h" -# endif -# include -#elif defined (HAVE_NCURSES_TERMCAP_H) -# include -#else - -/* On Solaris2, sys/types.h #includes sys/reg.h, which #defines PC. - Unfortunately, PC is a global variable used by the termcap library. */ -#ifdef PC -# undef PC -#endif - -extern char PC; -extern char *UP, *BC; - -extern short ospeed; - -extern int tgetent (); -extern int tgetflag (); -extern int tgetnum (); -extern char *tgetstr (); - -extern int tputs (); - -extern char *tgoto (); - -#endif /* HAVE_TERMCAP_H */ - -#endif /* !_RLTCAP_H_ */ diff --git a/readline/terminal.c b/readline/terminal.c deleted file mode 100644 index e557389776..0000000000 --- a/readline/terminal.c +++ /dev/null @@ -1,779 +0,0 @@ -/* terminal.c -- controlling the terminal with termcap. */ - -/* Copyright (C) 1996-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include "posixstat.h" -#include -#if defined (HAVE_SYS_FILE_H) -# include -#endif /* HAVE_SYS_FILE_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_LOCALE_H) -# include -#endif - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -#ifdef __MSDOS__ -# include -#endif - -#include "rltty.h" -#if defined (HAVE_SYS_IOCTL_H) -# include /* include for declaration of ioctl */ -#endif -#include "tcap.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -#if defined (__MINGW32__) -# include -# include - -static void _win_get_screensize PARAMS((int *, int *)); -#endif - -#if defined (__EMX__) -static void _emx_get_screensize PARAMS((int *, int *)); -#endif - -/* If the calling application sets this to a non-zero value, readline will - use the $LINES and $COLUMNS environment variables to set its idea of the - window size before interrogating the kernel. */ -int rl_prefer_env_winsize = 0; - -/* If this is non-zero, readline will set LINES and COLUMNS in the - environment when it handles SIGWINCH. */ -int rl_change_environment = 1; - -/* **************************************************************** */ -/* */ -/* Terminal and Termcap */ -/* */ -/* **************************************************************** */ - -#ifndef __MSDOS__ -static char *term_buffer = (char *)NULL; -static char *term_string_buffer = (char *)NULL; -#endif - -static int tcap_initialized; - -#if !defined (__linux__) && !defined (NCURSES_VERSION) -# if defined (__EMX__) || defined (NEED_EXTERN_PC) -extern -# endif /* __EMX__ || NEED_EXTERN_PC */ -char PC, *BC, *UP; -#endif /* !__linux__ && !NCURSES_VERSION */ - -/* Some strings to control terminal actions. These are output by tputs (). */ -char *_rl_term_clreol; -char *_rl_term_clrpag; -char *_rl_term_clrscroll; -char *_rl_term_cr; -char *_rl_term_backspace; -char *_rl_term_goto; -char *_rl_term_pc; - -/* Non-zero if we determine that the terminal can do character insertion. */ -int _rl_terminal_can_insert = 0; - -/* How to insert characters. */ -char *_rl_term_im; -char *_rl_term_ei; -char *_rl_term_ic; -char *_rl_term_ip; -char *_rl_term_IC; - -/* How to delete characters. */ -char *_rl_term_dc; -char *_rl_term_DC; - -/* How to move forward a char, non-destructively */ -char *_rl_term_forward_char; - -/* How to go up a line. */ -char *_rl_term_up; - -/* A visible bell; char if the terminal can be made to flash the screen. */ -static char *_rl_visible_bell; - -/* Non-zero means the terminal can auto-wrap lines. */ -int _rl_term_autowrap = -1; - -/* Non-zero means that this terminal has a meta key. */ -static int term_has_meta; - -/* The sequences to write to turn on and off the meta key, if this - terminal has one. */ -static char *_rl_term_mm; -static char *_rl_term_mo; - -/* The key sequences output by the arrow keys, if this terminal has any. */ -static char *_rl_term_ku; -static char *_rl_term_kd; -static char *_rl_term_kr; -static char *_rl_term_kl; - -/* How to initialize and reset the arrow keys, if this terminal has any. */ -static char *_rl_term_ks; -static char *_rl_term_ke; - -/* The key sequences sent by the Home and End keys, if any. */ -static char *_rl_term_kh; -static char *_rl_term_kH; -static char *_rl_term_at7; /* @7 */ - -/* Delete key */ -static char *_rl_term_kD; - -/* Insert key */ -static char *_rl_term_kI; - -/* Cursor control */ -static char *_rl_term_vs; /* very visible */ -static char *_rl_term_ve; /* normal */ - -static void bind_termcap_arrow_keys PARAMS((Keymap)); - -/* Variables that hold the screen dimensions, used by the display code. */ -int _rl_screenwidth, _rl_screenheight, _rl_screenchars; - -/* Non-zero means the user wants to enable the keypad. */ -int _rl_enable_keypad; - -/* Non-zero means the user wants to enable a meta key. */ -int _rl_enable_meta = 1; - -#if defined (__EMX__) -static void -_emx_get_screensize (int *swp, int *shp) -{ - int sz[2]; - - _scrsize (sz); - - if (swp) - *swp = sz[0]; - if (shp) - *shp = sz[1]; -} -#endif - -#if defined (__MINGW32__) -static void -_win_get_screensize (int *swp, int *shp) -{ - HANDLE hConOut; - CONSOLE_SCREEN_BUFFER_INFO scr; - - hConOut = GetStdHandle (STD_OUTPUT_HANDLE); - if (hConOut != INVALID_HANDLE_VALUE) - { - if (GetConsoleScreenBufferInfo (hConOut, &scr)) - { - *swp = scr.dwSize.X; - *shp = scr.srWindow.Bottom - scr.srWindow.Top + 1; - } - } -} -#endif - -/* Get readline's idea of the screen size. TTY is a file descriptor open - to the terminal. If IGNORE_ENV is true, we do not pay attention to the - values of $LINES and $COLUMNS. The tests for TERM_STRING_BUFFER being - non-null serve to check whether or not we have initialized termcap. */ -void -_rl_get_screen_size (int tty, int ignore_env) -{ - char *ss; -#if defined (TIOCGWINSZ) - struct winsize window_size; -#endif /* TIOCGWINSZ */ - int wr, wc; - - wr = wc = -1; -#if defined (TIOCGWINSZ) - if (ioctl (tty, TIOCGWINSZ, &window_size) == 0) - { - wc = (int) window_size.ws_col; - wr = (int) window_size.ws_row; - } -#endif /* TIOCGWINSZ */ - -#if defined (__EMX__) - _emx_get_screensize (&wc, &wr); -#elif defined (__MINGW32__) - _win_get_screensize (&wc, &wr); -#endif - - if (ignore_env || rl_prefer_env_winsize == 0) - { - _rl_screenwidth = wc; - _rl_screenheight = wr; - } - else - _rl_screenwidth = _rl_screenheight = -1; - - /* Environment variable COLUMNS overrides setting of "co" if IGNORE_ENV - is unset. If we prefer the environment, check it first before - assigning the value returned by the kernel. */ - if (_rl_screenwidth <= 0) - { - if (ignore_env == 0 && (ss = sh_get_env_value ("COLUMNS"))) - _rl_screenwidth = atoi (ss); - - if (_rl_screenwidth <= 0) - _rl_screenwidth = wc; - -#if defined (__DJGPP__) - if (_rl_screenwidth <= 0) - _rl_screenwidth = ScreenCols (); -#else - if (_rl_screenwidth <= 0 && term_string_buffer) - _rl_screenwidth = tgetnum ("co"); -#endif - } - - /* Environment variable LINES overrides setting of "li" if IGNORE_ENV - is unset. */ - if (_rl_screenheight <= 0) - { - if (ignore_env == 0 && (ss = sh_get_env_value ("LINES"))) - _rl_screenheight = atoi (ss); - - if (_rl_screenheight <= 0) - _rl_screenheight = wr; - -#if defined (__DJGPP__) - if (_rl_screenheight <= 0) - _rl_screenheight = ScreenRows (); -#else - if (_rl_screenheight <= 0 && term_string_buffer) - _rl_screenheight = tgetnum ("li"); -#endif - } - - /* If all else fails, default to 80x24 terminal. */ - if (_rl_screenwidth <= 1) - _rl_screenwidth = 80; - - if (_rl_screenheight <= 0) - _rl_screenheight = 24; - - /* If we're being compiled as part of bash, set the environment - variables $LINES and $COLUMNS to new values. Otherwise, just - do a pair of putenv () or setenv () calls. */ - if (rl_change_environment) - sh_set_lines_and_columns (_rl_screenheight, _rl_screenwidth); - - if (_rl_term_autowrap == 0) - _rl_screenwidth--; - - _rl_screenchars = _rl_screenwidth * _rl_screenheight; -} - -void -_rl_set_screen_size (int rows, int cols) -{ - if (_rl_term_autowrap == -1) - _rl_init_terminal_io (rl_terminal_name); - - if (rows > 0) - _rl_screenheight = rows; - if (cols > 0) - { - _rl_screenwidth = cols; - if (_rl_term_autowrap == 0) - _rl_screenwidth--; - } - - if (rows > 0 || cols > 0) - _rl_screenchars = _rl_screenwidth * _rl_screenheight; -} - -void -rl_set_screen_size (int rows, int cols) -{ - _rl_set_screen_size (rows, cols); -} - -void -rl_get_screen_size (int *rows, int *cols) -{ - if (rows) - *rows = _rl_screenheight; - if (cols) - *cols = _rl_screenwidth; -} - -void -rl_reset_screen_size (void) -{ - _rl_get_screen_size (fileno (rl_instream), 0); -} - -void -_rl_sigwinch_resize_terminal (void) -{ - _rl_get_screen_size (fileno (rl_instream), 1); -} - -void -rl_resize_terminal (void) -{ - _rl_get_screen_size (fileno (rl_instream), 1); - if (_rl_echoing_p) - { - if (CUSTOM_REDISPLAY_FUNC ()) - rl_forced_update_display (); - else if (RL_ISSTATE(RL_STATE_REDISPLAYING) == 0) - _rl_redisplay_after_sigwinch (); - } -} - -struct _tc_string { - const char * const tc_var; - char **tc_value; -}; - -/* This should be kept sorted, just in case we decide to change the - search algorithm to something smarter. */ -static const struct _tc_string tc_strings[] = -{ - { "@7", &_rl_term_at7 }, - { "DC", &_rl_term_DC }, - { "E3", &_rl_term_clrscroll }, - { "IC", &_rl_term_IC }, - { "ce", &_rl_term_clreol }, - { "cl", &_rl_term_clrpag }, - { "cr", &_rl_term_cr }, - { "dc", &_rl_term_dc }, - { "ei", &_rl_term_ei }, - { "ic", &_rl_term_ic }, - { "im", &_rl_term_im }, - { "kD", &_rl_term_kD }, /* delete */ - { "kH", &_rl_term_kH }, /* home down ?? */ - { "kI", &_rl_term_kI }, /* insert */ - { "kd", &_rl_term_kd }, - { "ke", &_rl_term_ke }, /* end keypad mode */ - { "kh", &_rl_term_kh }, /* home */ - { "kl", &_rl_term_kl }, - { "kr", &_rl_term_kr }, - { "ks", &_rl_term_ks }, /* start keypad mode */ - { "ku", &_rl_term_ku }, - { "le", &_rl_term_backspace }, - { "mm", &_rl_term_mm }, - { "mo", &_rl_term_mo }, - { "nd", &_rl_term_forward_char }, - { "pc", &_rl_term_pc }, - { "up", &_rl_term_up }, - { "vb", &_rl_visible_bell }, - { "vs", &_rl_term_vs }, - { "ve", &_rl_term_ve }, -}; - -#define NUM_TC_STRINGS (sizeof (tc_strings) / sizeof (struct _tc_string)) - -/* Read the desired terminal capability strings into BP. The capabilities - are described in the TC_STRINGS table. */ -static void -get_term_capabilities (char **bp) -{ -#if !defined (__DJGPP__) /* XXX - doesn't DJGPP have a termcap library? */ - register int i; - - for (i = 0; i < NUM_TC_STRINGS; i++) - *(tc_strings[i].tc_value) = tgetstr ((char *)tc_strings[i].tc_var, bp); -#endif - tcap_initialized = 1; -} - -int -_rl_init_terminal_io (const char *terminal_name) -{ - const char *term; - char *buffer; - int tty, tgetent_ret; - - term = terminal_name ? terminal_name : sh_get_env_value ("TERM"); - _rl_term_clrpag = _rl_term_cr = _rl_term_clreol = _rl_term_clrscroll = (char *)NULL; - tty = rl_instream ? fileno (rl_instream) : 0; - - if (term == 0) - term = "dumb"; - -#ifdef __MSDOS__ - _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL; - _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL; - _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL; - _rl_term_mm = _rl_term_mo = (char *)NULL; - _rl_terminal_can_insert = term_has_meta = _rl_term_autowrap = 0; - _rl_term_cr = "\r"; - _rl_term_backspace = (char *)NULL; - _rl_term_goto = _rl_term_pc = _rl_term_ip = (char *)NULL; - _rl_term_ks = _rl_term_ke =_rl_term_vs = _rl_term_ve = (char *)NULL; - _rl_term_kh = _rl_term_kH = _rl_term_at7 = _rl_term_kI = (char *)NULL; -#if defined(HACK_TERMCAP_MOTION) - _rl_term_forward_char = (char *)NULL; -#endif - - _rl_get_screen_size (tty, 0); -#else /* !__MSDOS__ */ - /* I've separated this out for later work on not calling tgetent at all - if the calling application has supplied a custom redisplay function, - (and possibly if the application has supplied a custom input function). */ - if (CUSTOM_REDISPLAY_FUNC()) - { - tgetent_ret = -1; - } - else - { - if (term_string_buffer == 0) - term_string_buffer = (char *)xmalloc(2032); - - if (term_buffer == 0) - term_buffer = (char *)xmalloc(4080); - - buffer = term_string_buffer; - - tgetent_ret = tgetent (term_buffer, term); - } - - if (tgetent_ret <= 0) - { - FREE (term_string_buffer); - FREE (term_buffer); - buffer = term_buffer = term_string_buffer = (char *)NULL; - - _rl_term_autowrap = 0; /* used by _rl_get_screen_size */ - - /* Allow calling application to set default height and width, using - rl_set_screen_size */ - if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) - { -#if defined (__EMX__) - _emx_get_screensize (&_rl_screenwidth, &_rl_screenheight); - _rl_screenwidth--; -#else /* !__EMX__ */ - _rl_get_screen_size (tty, 0); -#endif /* !__EMX__ */ - } - - /* Defaults. */ - if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) - { - _rl_screenwidth = 79; - _rl_screenheight = 24; - } - - /* Everything below here is used by the redisplay code (tputs). */ - _rl_screenchars = _rl_screenwidth * _rl_screenheight; - _rl_term_cr = "\r"; - _rl_term_im = _rl_term_ei = _rl_term_ic = _rl_term_IC = (char *)NULL; - _rl_term_up = _rl_term_dc = _rl_term_DC = _rl_visible_bell = (char *)NULL; - _rl_term_ku = _rl_term_kd = _rl_term_kl = _rl_term_kr = (char *)NULL; - _rl_term_kh = _rl_term_kH = _rl_term_kI = _rl_term_kD = (char *)NULL; - _rl_term_ks = _rl_term_ke = _rl_term_at7 = (char *)NULL; - _rl_term_mm = _rl_term_mo = (char *)NULL; - _rl_term_ve = _rl_term_vs = (char *)NULL; - _rl_term_forward_char = (char *)NULL; - _rl_terminal_can_insert = term_has_meta = 0; - - /* Reasonable defaults for tgoto(). Readline currently only uses - tgoto if _rl_term_IC or _rl_term_DC is defined, but just in case we - change that later... */ - PC = '\0'; - BC = _rl_term_backspace = "\b"; - UP = _rl_term_up; - - return 0; - } - - get_term_capabilities (&buffer); - - /* Set up the variables that the termcap library expects the application - to provide. */ - PC = _rl_term_pc ? *_rl_term_pc : 0; - BC = _rl_term_backspace; - UP = _rl_term_up; - - if (!_rl_term_cr) - _rl_term_cr = "\r"; - - _rl_term_autowrap = tgetflag ("am") && tgetflag ("xn"); - - /* Allow calling application to set default height and width, using - rl_set_screen_size */ - if (_rl_screenwidth <= 0 || _rl_screenheight <= 0) - _rl_get_screen_size (tty, 0); - - /* "An application program can assume that the terminal can do - character insertion if *any one of* the capabilities `IC', - `im', `ic' or `ip' is provided." But we can't do anything if - only `ip' is provided, so... */ - _rl_terminal_can_insert = (_rl_term_IC || _rl_term_im || _rl_term_ic); - - /* Check to see if this terminal has a meta key and clear the capability - variables if there is none. */ - term_has_meta = tgetflag ("km") != 0; - if (term_has_meta == 0) - _rl_term_mm = _rl_term_mo = (char *)NULL; -#endif /* !__MSDOS__ */ - - /* Attempt to find and bind the arrow keys. Do not override already - bound keys in an overzealous attempt, however. */ - - bind_termcap_arrow_keys (emacs_standard_keymap); - -#if defined (VI_MODE) - bind_termcap_arrow_keys (vi_movement_keymap); - bind_termcap_arrow_keys (vi_insertion_keymap); -#endif /* VI_MODE */ - - return 0; -} - -/* Bind the arrow key sequences from the termcap description in MAP. */ -static void -bind_termcap_arrow_keys (Keymap map) -{ - Keymap xkeymap; - - xkeymap = _rl_keymap; - _rl_keymap = map; - - rl_bind_keyseq_if_unbound (_rl_term_ku, rl_get_previous_history); - rl_bind_keyseq_if_unbound (_rl_term_kd, rl_get_next_history); - rl_bind_keyseq_if_unbound (_rl_term_kr, rl_forward_char); - rl_bind_keyseq_if_unbound (_rl_term_kl, rl_backward_char); - - rl_bind_keyseq_if_unbound (_rl_term_kh, rl_beg_of_line); /* Home */ - rl_bind_keyseq_if_unbound (_rl_term_at7, rl_end_of_line); /* End */ - - rl_bind_keyseq_if_unbound (_rl_term_kD, rl_delete); - rl_bind_keyseq_if_unbound (_rl_term_kI, rl_overwrite_mode); /* Insert */ - - _rl_keymap = xkeymap; -} - -char * -rl_get_termcap (const char *cap) -{ - register int i; - - if (tcap_initialized == 0) - return ((char *)NULL); - for (i = 0; i < NUM_TC_STRINGS; i++) - { - if (tc_strings[i].tc_var[0] == cap[0] && strcmp (tc_strings[i].tc_var, cap) == 0) - return *(tc_strings[i].tc_value); - } - return ((char *)NULL); -} - -/* Re-initialize the terminal considering that the TERM/TERMCAP variable - has changed. */ -int -rl_reset_terminal (const char *terminal_name) -{ - _rl_screenwidth = _rl_screenheight = 0; - _rl_init_terminal_io (terminal_name); - return 0; -} - -/* A function for the use of tputs () */ -#ifdef _MINIX -void -_rl_output_character_function (int c) -{ - putc (c, _rl_out_stream); -} -#else /* !_MINIX */ -int -_rl_output_character_function (int c) -{ - return putc (c, _rl_out_stream); -} -#endif /* !_MINIX */ - -/* Write COUNT characters from STRING to the output stream. */ -void -_rl_output_some_chars (const char *string, int count) -{ - fwrite (string, 1, count, _rl_out_stream); -} - -/* Move the cursor back. */ -int -_rl_backspace (int count) -{ - register int i; - -#ifndef __MSDOS__ - if (_rl_term_backspace) - for (i = 0; i < count; i++) - tputs (_rl_term_backspace, 1, _rl_output_character_function); - else -#endif - for (i = 0; i < count; i++) - putc ('\b', _rl_out_stream); - return 0; -} - -/* Move to the start of the next line. */ -int -rl_crlf (void) -{ -#if defined (NEW_TTY_DRIVER) || defined (__MINT__) - if (_rl_term_cr) - tputs (_rl_term_cr, 1, _rl_output_character_function); -#endif /* NEW_TTY_DRIVER || __MINT__ */ - putc ('\n', _rl_out_stream); - return 0; -} - -/* Ring the terminal bell. */ -int -rl_ding (void) -{ - if (_rl_echoing_p) - { - switch (_rl_bell_preference) - { - case NO_BELL: - default: - break; - case VISIBLE_BELL: - if (_rl_visible_bell) - { -#ifdef __DJGPP__ - ScreenVisualBell (); -#else - tputs (_rl_visible_bell, 1, _rl_output_character_function); -#endif - break; - } - /* FALLTHROUGH */ - case AUDIBLE_BELL: - fprintf (stderr, "\007"); - fflush (stderr); - break; - } - return (0); - } - return (-1); -} - -/* **************************************************************** */ -/* */ -/* Controlling the Meta Key and Keypad */ -/* */ -/* **************************************************************** */ - -static int enabled_meta = 0; /* flag indicating we enabled meta mode */ - -void -_rl_enable_meta_key (void) -{ -#if !defined (__DJGPP__) - if (term_has_meta && _rl_term_mm) - { - tputs (_rl_term_mm, 1, _rl_output_character_function); - enabled_meta = 1; - } -#endif -} - -void -_rl_disable_meta_key (void) -{ -#if !defined (__DJGPP__) - if (term_has_meta && _rl_term_mo && enabled_meta) - { - tputs (_rl_term_mo, 1, _rl_output_character_function); - enabled_meta = 0; - } -#endif -} - -void -_rl_control_keypad (int on) -{ -#if !defined (__DJGPP__) - if (on && _rl_term_ks) - tputs (_rl_term_ks, 1, _rl_output_character_function); - else if (!on && _rl_term_ke) - tputs (_rl_term_ke, 1, _rl_output_character_function); -#endif -} - -/* **************************************************************** */ -/* */ -/* Controlling the Cursor */ -/* */ -/* **************************************************************** */ - -/* Set the cursor appropriately depending on IM, which is one of the - insert modes (insert or overwrite). Insert mode gets the normal - cursor. Overwrite mode gets a very visible cursor. Only does - anything if we have both capabilities. */ -void -_rl_set_cursor (int im, int force) -{ -#ifndef __MSDOS__ - if (_rl_term_ve && _rl_term_vs) - { - if (force || im != rl_insert_mode) - { - if (im == RL_IM_OVERWRITE) - tputs (_rl_term_vs, 1, _rl_output_character_function); - else - tputs (_rl_term_ve, 1, _rl_output_character_function); - } - } -#endif -} diff --git a/readline/text.c b/readline/text.c deleted file mode 100644 index cddaeebd2d..0000000000 --- a/readline/text.c +++ /dev/null @@ -1,1815 +0,0 @@ -/* text.c -- text handling commands for readline. */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#if defined (HAVE_UNISTD_H) -# include -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_LOCALE_H) -# include -#endif - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -#if defined (__EMX__) -# define INCL_DOSPROCESS -# include -#endif /* __EMX__ */ - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "rlshell.h" -#include "xmalloc.h" - -/* Forward declarations. */ -static int rl_change_case PARAMS((int, int)); -static int _rl_char_search PARAMS((int, int, int)); - -#if defined (READLINE_CALLBACKS) -static int _rl_insert_next_callback PARAMS((_rl_callback_generic_arg *)); -static int _rl_char_search_callback PARAMS((_rl_callback_generic_arg *)); -#endif - -/* The largest chunk of text that can be inserted in one call to - rl_insert_text. Text blocks larger than this are divided. */ -#define TEXT_COUNT_MAX 1024 - -int _rl_optimize_typeahead = 1; /* rl_insert tries to read typeahead */ - -/* **************************************************************** */ -/* */ -/* Insert and Delete */ -/* */ -/* **************************************************************** */ - -/* Insert a string of text into the line at point. This is the only - way that you should do insertion. _rl_insert_char () calls this - function. Returns the number of characters inserted. */ -int -rl_insert_text (const char *string) -{ - register int i, l; - - l = (string && *string) ? strlen (string) : 0; - if (l == 0) - return 0; - - if (rl_end + l >= rl_line_buffer_len) - rl_extend_line_buffer (rl_end + l); - - for (i = rl_end; i >= rl_point; i--) - rl_line_buffer[i + l] = rl_line_buffer[i]; - strncpy (rl_line_buffer + rl_point, string, l); - - /* Remember how to undo this if we aren't undoing something. */ - if (_rl_doing_an_undo == 0) - { - /* If possible and desirable, concatenate the undos. */ - if ((l == 1) && - rl_undo_list && - (rl_undo_list->what == UNDO_INSERT) && - (rl_undo_list->end == rl_point) && - (rl_undo_list->end - rl_undo_list->start < 20)) - rl_undo_list->end++; - else - rl_add_undo (UNDO_INSERT, rl_point, rl_point + l, (char *)NULL); - } - rl_point += l; - rl_end += l; - rl_line_buffer[rl_end] = '\0'; - return l; -} - -/* Delete the string between FROM and TO. FROM is inclusive, TO is not. - Returns the number of characters deleted. */ -int -rl_delete_text (int from, int to) -{ - register char *text; - register int diff, i; - - /* Fix it if the caller is confused. */ - if (from > to) - SWAP (from, to); - - /* fix boundaries */ - if (to > rl_end) - { - to = rl_end; - if (from > to) - from = to; - } - if (from < 0) - from = 0; - - text = rl_copy_text (from, to); - - /* Some versions of strncpy() can't handle overlapping arguments. */ - diff = to - from; - for (i = from; i < rl_end - diff; i++) - rl_line_buffer[i] = rl_line_buffer[i + diff]; - - /* Remember how to undo this delete. */ - if (_rl_doing_an_undo == 0) - rl_add_undo (UNDO_DELETE, from, to, text); - else - xfree (text); - - rl_end -= diff; - rl_line_buffer[rl_end] = '\0'; - return (diff); -} - -/* Fix up point so that it is within the line boundaries after killing - text. If FIX_MARK_TOO is non-zero, the mark is forced within line - boundaries also. */ - -#define _RL_FIX_POINT(x) \ - do { \ - if (x > rl_end) \ - x = rl_end; \ - else if (x < 0) \ - x = 0; \ - } while (0) - -void -_rl_fix_point (int fix_mark_too) -{ - _RL_FIX_POINT (rl_point); - if (fix_mark_too) - _RL_FIX_POINT (rl_mark); -} -#undef _RL_FIX_POINT - -/* Replace the contents of the line buffer between START and END with - TEXT. The operation is undoable. To replace the entire line in an - undoable mode, use _rl_replace_text(text, 0, rl_end); */ -int -_rl_replace_text (const char *text, int start, int end) -{ - int n; - - n = 0; - rl_begin_undo_group (); - if (start <= end) - rl_delete_text (start, end + 1); - rl_point = start; - if (*text) - n = rl_insert_text (text); - rl_end_undo_group (); - - return n; -} - -/* Replace the current line buffer contents with TEXT. If CLEAR_UNDO is - non-zero, we free the current undo list. */ -void -rl_replace_line (const char *text, int clear_undo) -{ - int len; - - len = strlen (text); - if (len >= rl_line_buffer_len) - rl_extend_line_buffer (len); - strcpy (rl_line_buffer, text); - rl_end = len; - - if (clear_undo) - rl_free_undo_list (); - - _rl_fix_point (1); -} - -/* **************************************************************** */ -/* */ -/* Readline character functions */ -/* */ -/* **************************************************************** */ - -/* This is not a gap editor, just a stupid line input routine. No hair - is involved in writing any of the functions, and none should be. */ - -/* Note that: - - rl_end is the place in the string that we would place '\0'; - i.e., it is always safe to place '\0' there. - - rl_point is the place in the string where the cursor is. Sometimes - this is the same as rl_end. - - Any command that is called interactively receives two arguments. - The first is a count: the numeric arg passed to this command. - The second is the key which invoked this command. -*/ - -/* **************************************************************** */ -/* */ -/* Movement Commands */ -/* */ -/* **************************************************************** */ - -/* Note that if you `optimize' the display for these functions, you cannot - use said functions in other functions which do not do optimizing display. - I.e., you will have to update the data base for rl_redisplay, and you - might as well let rl_redisplay do that job. */ - -/* Move forward COUNT bytes. */ -int -rl_forward_byte (int count, int key) -{ - if (count < 0) - return (rl_backward_byte (-count, key)); - - if (count > 0) - { - int end, lend; - - end = rl_point + count; -#if defined (VI_MODE) - lend = rl_end > 0 ? rl_end - (VI_COMMAND_MODE()) : rl_end; -#else - lend = rl_end; -#endif - - if (end > lend) - { - rl_point = lend; - rl_ding (); - } - else - rl_point = end; - } - - if (rl_end < 0) - rl_end = 0; - - return 0; -} - -int -_rl_forward_char_internal (int count) -{ - int point; - -#if defined (HANDLE_MULTIBYTE) - point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); - -#if defined (VI_MODE) - if (point >= rl_end && VI_COMMAND_MODE()) - point = _rl_find_prev_mbchar (rl_line_buffer, rl_end, MB_FIND_NONZERO); -#endif - - if (rl_end < 0) - rl_end = 0; -#else - point = rl_point + count; -#endif - - if (point > rl_end) - point = rl_end; - return (point); -} - -int -_rl_backward_char_internal (int count) -{ - int point; - - point = rl_point; -#if defined (HANDLE_MULTIBYTE) - if (count > 0) - { - while (count > 0 && point > 0) - { - point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO); - count--; - } - if (count > 0) - return 0; /* XXX - rl_ding() here? */ - } -#else - if (count > 0) - point -= count; -#endif - - if (point < 0) - point = 0; - return (point); -} - -#if defined (HANDLE_MULTIBYTE) -/* Move forward COUNT characters. */ -int -rl_forward_char (int count, int key) -{ - int point; - - if (MB_CUR_MAX == 1 || rl_byte_oriented) - return (rl_forward_byte (count, key)); - - if (count < 0) - return (rl_backward_char (-count, key)); - - if (count > 0) - { - if (rl_point == rl_end && EMACS_MODE()) - { - rl_ding (); - return 0; - } - - point = _rl_forward_char_internal (count); - - if (rl_point == point) - rl_ding (); - - rl_point = point; - } - - return 0; -} -#else /* !HANDLE_MULTIBYTE */ -int -rl_forward_char (int count, int key) -{ - return (rl_forward_byte (count, key)); -} -#endif /* !HANDLE_MULTIBYTE */ - -/* Backwards compatibility. */ -int -rl_forward (int count, int key) -{ - return (rl_forward_char (count, key)); -} - -/* Move backward COUNT bytes. */ -int -rl_backward_byte (int count, int key) -{ - if (count < 0) - return (rl_forward_byte (-count, key)); - - if (count > 0) - { - if (rl_point < count) - { - rl_point = 0; - rl_ding (); - } - else - rl_point -= count; - } - - if (rl_point < 0) - rl_point = 0; - - return 0; -} - -#if defined (HANDLE_MULTIBYTE) -/* Move backward COUNT characters. */ -int -rl_backward_char (int count, int key) -{ - int point; - - if (MB_CUR_MAX == 1 || rl_byte_oriented) - return (rl_backward_byte (count, key)); - - if (count < 0) - return (rl_forward_char (-count, key)); - - if (count > 0) - { - point = rl_point; - - while (count > 0 && point > 0) - { - point = _rl_find_prev_mbchar (rl_line_buffer, point, MB_FIND_NONZERO); - count--; - } - if (count > 0) - { - rl_point = 0; - rl_ding (); - } - else - rl_point = point; - } - - return 0; -} -#else -int -rl_backward_char (int count, int key) -{ - return (rl_backward_byte (count, key)); -} -#endif - -/* Backwards compatibility. */ -int -rl_backward (int count, int key) -{ - return (rl_backward_char (count, key)); -} - -/* Move to the beginning of the line. */ -int -rl_beg_of_line (int count, int key) -{ - rl_point = 0; - return 0; -} - -/* Move to the end of the line. */ -int -rl_end_of_line (int count, int key) -{ - rl_point = rl_end; - return 0; -} - -/* Move forward a word. We do what Emacs does. Handles multibyte chars. */ -int -rl_forward_word (int count, int key) -{ - int c; - - if (count < 0) - return (rl_backward_word (-count, key)); - - while (count) - { - if (rl_point == rl_end) - return 0; - - /* If we are not in a word, move forward until we are in one. - Then, move forward until we hit a non-alphabetic character. */ - c = _rl_char_value (rl_line_buffer, rl_point); - - if (_rl_walphabetic (c) == 0) - { - rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - while (rl_point < rl_end) - { - c = _rl_char_value (rl_line_buffer, rl_point); - if (_rl_walphabetic (c)) - break; - rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - } - } - - if (rl_point == rl_end) - return 0; - - rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - while (rl_point < rl_end) - { - c = _rl_char_value (rl_line_buffer, rl_point); - if (_rl_walphabetic (c) == 0) - break; - rl_point = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - } - - --count; - } - - return 0; -} - -/* Move backward a word. We do what Emacs does. Handles multibyte chars. */ -int -rl_backward_word (int count, int key) -{ - int c, p; - - if (count < 0) - return (rl_forward_word (-count, key)); - - while (count) - { - if (rl_point == 0) - return 0; - - /* Like rl_forward_word (), except that we look at the characters - just before point. */ - - p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); - c = _rl_char_value (rl_line_buffer, p); - - if (_rl_walphabetic (c) == 0) - { - rl_point = p; - while (rl_point > 0) - { - p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); - c = _rl_char_value (rl_line_buffer, p); - if (_rl_walphabetic (c)) - break; - rl_point = p; - } - } - - while (rl_point) - { - p = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); - c = _rl_char_value (rl_line_buffer, p); - if (_rl_walphabetic (c) == 0) - break; - else - rl_point = p; - } - - --count; - } - - return 0; -} - -/* Clear the current line. Numeric argument to C-l does this. */ -int -rl_refresh_line (int ignore1, int ignore2) -{ - int curr_line; - - curr_line = _rl_current_display_line (); - - _rl_move_vert (curr_line); - _rl_move_cursor_relative (0, rl_line_buffer); /* XXX is this right */ - - _rl_clear_to_eol (0); /* arg of 0 means to not use spaces */ - - rl_redraw_prompt_last_line (); - rl_display_fixed = 1; - - return 0; -} - -/* C-l typed to a line without quoting clears the screen, and then reprints - the prompt and the current input line. Given a numeric arg, redraw only - the current line. */ -int -rl_clear_screen (int count, int key) -{ - if (rl_explicit_arg) - { - rl_refresh_line (count, key); - return 0; - } - - _rl_clear_screen (); /* calls termcap function to clear screen */ - rl_forced_update_display (); - rl_display_fixed = 1; - - return 0; -} - -int -rl_previous_screen_line (int count, int key) -{ - int c; - - c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1); - return (rl_backward_char (c, key)); -} - -int -rl_next_screen_line (int count, int key) -{ - int c; - - c = _rl_term_autowrap ? _rl_screenwidth : (_rl_screenwidth + 1); - return (rl_forward_char (c, key)); -} - -int -rl_skip_csi_sequence (int count, int key) -{ - int ch; - - RL_SETSTATE (RL_STATE_MOREINPUT); - do - ch = rl_read_key (); - while (ch >= 0x20 && ch < 0x40); - RL_UNSETSTATE (RL_STATE_MOREINPUT); - - return (ch < 0); -} - -int -rl_arrow_keys (int count, int key) -{ - int ch; - - RL_SETSTATE(RL_STATE_MOREINPUT); - ch = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - if (ch < 0) - return (1); - - switch (_rl_to_upper (ch)) - { - case 'A': - rl_get_previous_history (count, ch); - break; - - case 'B': - rl_get_next_history (count, ch); - break; - - case 'C': - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_forward_char (count, ch); - else - rl_forward_byte (count, ch); - break; - - case 'D': - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_backward_char (count, ch); - else - rl_backward_byte (count, ch); - break; - - default: - rl_ding (); - } - - return 0; -} - -/* **************************************************************** */ -/* */ -/* Text commands */ -/* */ -/* **************************************************************** */ - -#ifdef HANDLE_MULTIBYTE -static char pending_bytes[MB_LEN_MAX]; -static int pending_bytes_length = 0; -static mbstate_t ps = {0}; -#endif - -/* Insert the character C at the current location, moving point forward. - If C introduces a multibyte sequence, we read the whole sequence and - then insert the multibyte char into the line buffer. */ -int -_rl_insert_char (int count, int c) -{ - register int i; - char *string; -#ifdef HANDLE_MULTIBYTE - int string_size; - char incoming[MB_LEN_MAX + 1]; - int incoming_length = 0; - mbstate_t ps_back; - static int stored_count = 0; -#endif - - if (count <= 0) - return 0; - -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX == 1 || rl_byte_oriented) - { - incoming[0] = c; - incoming[1] = '\0'; - incoming_length = 1; - } - else if (_rl_utf8locale && (c & 0x80) == 0) - { - incoming[0] = c; - incoming[1] = '\0'; - incoming_length = 1; - } - else - { - wchar_t wc; - size_t ret; - - if (stored_count <= 0) - stored_count = count; - else - count = stored_count; - - ps_back = ps; - pending_bytes[pending_bytes_length++] = c; - ret = mbrtowc (&wc, pending_bytes, pending_bytes_length, &ps); - - if (ret == (size_t)-2) - { - /* Bytes too short to compose character, try to wait for next byte. - Restore the state of the byte sequence, because in this case the - effect of mbstate is undefined. */ - ps = ps_back; - return 1; - } - else if (ret == (size_t)-1) - { - /* Invalid byte sequence for the current locale. Treat first byte - as a single character. */ - incoming[0] = pending_bytes[0]; - incoming[1] = '\0'; - incoming_length = 1; - pending_bytes_length--; - memmove (pending_bytes, pending_bytes + 1, pending_bytes_length); - /* Clear the state of the byte sequence, because in this case the - effect of mbstate is undefined. */ - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (ret == (size_t)0) - { - incoming[0] = '\0'; - incoming_length = 0; - pending_bytes_length--; - /* Clear the state of the byte sequence, because in this case the - effect of mbstate is undefined. */ - memset (&ps, 0, sizeof (mbstate_t)); - } - else if (ret == 1) - { - incoming[0] = pending_bytes[0]; - incoming[incoming_length = 1] = '\0'; - pending_bytes_length = 0; - } - else - { - /* We successfully read a single multibyte character. */ - memcpy (incoming, pending_bytes, pending_bytes_length); - incoming[pending_bytes_length] = '\0'; - incoming_length = pending_bytes_length; - pending_bytes_length = 0; - } - } -#endif /* HANDLE_MULTIBYTE */ - - /* If we can optimize, then do it. But don't let people crash - readline because of extra large arguments. */ - if (count > 1 && count <= TEXT_COUNT_MAX) - { -#if defined (HANDLE_MULTIBYTE) - string_size = count * incoming_length; - string = (char *)xmalloc (1 + string_size); - - i = 0; - while (i < string_size) - { - if (incoming_length == 1) - string[i++] = *incoming; - else - { - strncpy (string + i, incoming, incoming_length); - i += incoming_length; - } - } - incoming_length = 0; - stored_count = 0; -#else /* !HANDLE_MULTIBYTE */ - string = (char *)xmalloc (1 + count); - - for (i = 0; i < count; i++) - string[i] = c; -#endif /* !HANDLE_MULTIBYTE */ - - string[i] = '\0'; - rl_insert_text (string); - xfree (string); - - return 0; - } - - if (count > TEXT_COUNT_MAX) - { - int decreaser; -#if defined (HANDLE_MULTIBYTE) - string_size = incoming_length * TEXT_COUNT_MAX; - string = (char *)xmalloc (1 + string_size); - - i = 0; - while (i < string_size) - { - if (incoming_length == 1) - string[i++] = *incoming; - else - { - strncpy (string + i, incoming, incoming_length); - i += incoming_length; - } - } - - while (count) - { - decreaser = (count > TEXT_COUNT_MAX) ? TEXT_COUNT_MAX : count; - string[decreaser*incoming_length] = '\0'; - rl_insert_text (string); - count -= decreaser; - } - - xfree (string); - incoming_length = 0; - stored_count = 0; -#else /* !HANDLE_MULTIBYTE */ - char str[TEXT_COUNT_MAX+1]; - - for (i = 0; i < TEXT_COUNT_MAX; i++) - str[i] = c; - - while (count) - { - decreaser = (count > TEXT_COUNT_MAX ? TEXT_COUNT_MAX : count); - str[decreaser] = '\0'; - rl_insert_text (str); - count -= decreaser; - } -#endif /* !HANDLE_MULTIBYTE */ - - return 0; - } - - if (MB_CUR_MAX == 1 || rl_byte_oriented) - { - /* We are inserting a single character. - If there is pending input, then make a string of all of the - pending characters that are bound to rl_insert, and insert - them all. Don't do this if we're current reading input from - a macro. */ - if ((RL_ISSTATE (RL_STATE_MACROINPUT) == 0) && _rl_pushed_input_available ()) - _rl_insert_typein (c); - else - { - /* Inserting a single character. */ - char str[2]; - - str[1] = '\0'; - str[0] = c; - rl_insert_text (str); - } - } -#if defined (HANDLE_MULTIBYTE) - else - { - rl_insert_text (incoming); - stored_count = 0; - } -#endif - - return 0; -} - -/* Overwrite the character at point (or next COUNT characters) with C. - If C introduces a multibyte character sequence, read the entire sequence - before starting the overwrite loop. */ -int -_rl_overwrite_char (int count, int c) -{ - int i; -#if defined (HANDLE_MULTIBYTE) - char mbkey[MB_LEN_MAX]; - int k; - - /* Read an entire multibyte character sequence to insert COUNT times. */ - if (count > 0 && MB_CUR_MAX > 1 && rl_byte_oriented == 0) - k = _rl_read_mbstring (c, mbkey, MB_LEN_MAX); -#endif - - rl_begin_undo_group (); - - for (i = 0; i < count; i++) - { -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_insert_text (mbkey); - else -#endif - _rl_insert_char (1, c); - - if (rl_point < rl_end) - rl_delete (1, c); - } - - rl_end_undo_group (); - - return 0; -} - -int -rl_insert (int count, int c) -{ - int r, n, x; - - r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (count, c) : _rl_overwrite_char (count, c); - - /* XXX -- attempt to batch-insert pending input that maps to self-insert */ - x = 0; - n = (unsigned short)-2; - while (_rl_optimize_typeahead && - rl_num_chars_to_read == 0 && - (RL_ISSTATE (RL_STATE_INPUTPENDING|RL_STATE_MACROINPUT) == 0) && - _rl_pushed_input_available () == 0 && - _rl_input_queued (0) && - (n = rl_read_key ()) > 0 && - _rl_keymap[(unsigned char)n].type == ISFUNC && - _rl_keymap[(unsigned char)n].function == rl_insert) - { - r = (rl_insert_mode == RL_IM_INSERT) ? _rl_insert_char (1, n) : _rl_overwrite_char (1, n); - /* _rl_insert_char keeps its own set of pending characters to compose a - complete multibyte character, and only returns 1 if it sees a character - that's part of a multibyte character but too short to complete one. We - can try to read another character in the hopes that we will get the - next one or just punt. Right now we try to read another character. - We don't want to call rl_insert_next if _rl_insert_char has already - stored the character in the pending_bytes array because that will - result in doubled input. */ - n = (unsigned short)-2; - x++; /* count of bytes of typeahead read, currently unused */ - if (r == 1) /* read partial multibyte character */ - continue; - if (rl_done || r != 0) - break; - } - - if (n != (unsigned short)-2) /* -2 = sentinel value for having inserted N */ - { - /* setting rl_pending_input inhibits setting rl_last_func so we do it - ourselves here */ - rl_last_func = rl_insert; - _rl_reset_argument (); - rl_executing_keyseq[rl_key_sequence_length = 0] = '\0'; - r = rl_execute_next (n); - } - - return r; -} - -/* Insert the next typed character verbatim. */ -static int -_rl_insert_next (int count) -{ - int c; - - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (c < 0) - return 1; - - if (RL_ISSTATE (RL_STATE_MACRODEF)) - _rl_add_macro_char (c); - -#if defined (HANDLE_SIGNALS) - if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) - _rl_restore_tty_signals (); -#endif - - return (_rl_insert_char (count, c)); -} - -#if defined (READLINE_CALLBACKS) -static int -_rl_insert_next_callback (_rl_callback_generic_arg *data) -{ - int count, r; - - count = data->count; - r = 0; - - if (count < 0) - { - data->count++; - r = _rl_insert_next (1); - _rl_want_redisplay = 1; - /* If we should keep going, leave the callback function installed */ - if (data->count < 0 && r == 0) - return r; - count = 0; /* data->count == 0 || r != 0; force break below */ - } - - /* Deregister function, let rl_callback_read_char deallocate data */ - _rl_callback_func = 0; - _rl_want_redisplay = 1; - - if (count == 0) - return r; - - return _rl_insert_next (count); -} -#endif - -int -rl_quoted_insert (int count, int key) -{ - /* Let's see...should the callback interface futz with signal handling? */ -#if defined (HANDLE_SIGNALS) - if (RL_ISSTATE (RL_STATE_CALLBACK) == 0) - _rl_disable_tty_signals (); -#endif - -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = _rl_callback_data_alloc (count); - _rl_callback_func = _rl_insert_next_callback; - return (0); - } -#endif - - /* A negative count means to quote the next -COUNT characters. */ - if (count < 0) - { - int r; - - do - r = _rl_insert_next (1); - while (r == 0 && ++count < 0); - return r; - } - - return _rl_insert_next (count); -} - -/* Insert a tab character. */ -int -rl_tab_insert (int count, int key) -{ - return (_rl_insert_char (count, '\t')); -} - -/* What to do when a NEWLINE is pressed. We accept the whole line. - KEY is the key that invoked this command. I guess it could have - meaning in the future. */ -int -rl_newline (int count, int key) -{ - rl_done = 1; - - if (_rl_history_preserve_point) - _rl_history_saved_point = (rl_point == rl_end) ? -1 : rl_point; - - RL_SETSTATE(RL_STATE_DONE); - -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - { - _rl_vi_done_inserting (); - if (_rl_vi_textmod_command (_rl_vi_last_command) == 0) /* XXX */ - _rl_vi_reset_last (); - } -#endif /* VI_MODE */ - - /* If we've been asked to erase empty lines, suppress the final update, - since _rl_update_final calls rl_crlf(). */ - if (rl_erase_empty_line && rl_point == 0 && rl_end == 0) - return 0; - - if (_rl_echoing_p) - _rl_update_final (); - return 0; -} - -/* What to do for some uppercase characters, like meta characters, - and some characters appearing in emacs_ctlx_keymap. This function - is just a stub, you bind keys to it and the code in _rl_dispatch () - is special cased. */ -int -rl_do_lowercase_version (int ignore1, int ignore2) -{ - return 0; -} - -/* This is different from what vi does, so the code's not shared. Emacs - rubout in overwrite mode has one oddity: it replaces a control - character that's displayed as two characters (^X) with two spaces. */ -int -_rl_overwrite_rubout (int count, int key) -{ - int opoint; - int i, l; - - if (rl_point == 0) - { - rl_ding (); - return 1; - } - - opoint = rl_point; - - /* L == number of spaces to insert */ - for (i = l = 0; i < count; i++) - { - rl_backward_char (1, key); - l += rl_character_len (rl_line_buffer[rl_point], rl_point); /* not exactly right */ - } - - rl_begin_undo_group (); - - if (count > 1 || rl_explicit_arg) - rl_kill_text (opoint, rl_point); - else - rl_delete_text (opoint, rl_point); - - /* Emacs puts point at the beginning of the sequence of spaces. */ - if (rl_point < rl_end) - { - opoint = rl_point; - _rl_insert_char (l, ' '); - rl_point = opoint; - } - - rl_end_undo_group (); - - return 0; -} - -/* Rubout the character behind point. */ -int -rl_rubout (int count, int key) -{ - if (count < 0) - return (rl_delete (-count, key)); - - if (!rl_point) - { - rl_ding (); - return 1; - } - - if (rl_insert_mode == RL_IM_OVERWRITE) - return (_rl_overwrite_rubout (count, key)); - - return (_rl_rubout_char (count, key)); -} - -int -_rl_rubout_char (int count, int key) -{ - int orig_point; - unsigned char c; - - /* Duplicated code because this is called from other parts of the library. */ - if (count < 0) - return (rl_delete (-count, key)); - - if (rl_point == 0) - { - rl_ding (); - return 1; - } - - orig_point = rl_point; - if (count > 1 || rl_explicit_arg) - { - rl_backward_char (count, key); - rl_kill_text (orig_point, rl_point); - } - else if (MB_CUR_MAX == 1 || rl_byte_oriented) - { - c = rl_line_buffer[--rl_point]; - rl_delete_text (rl_point, orig_point); - /* The erase-at-end-of-line hack is of questionable merit now. */ - if (rl_point == rl_end && ISPRINT ((unsigned char)c) && _rl_last_c_pos) - { - int l; - l = rl_character_len (c, rl_point); - _rl_erase_at_end_of_line (l); - } - } - else - { - rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); - rl_delete_text (rl_point, orig_point); - } - - return 0; -} - -/* Delete the character under the cursor. Given a numeric argument, - kill that many characters instead. */ -int -rl_delete (int count, int key) -{ - int xpoint; - - if (count < 0) - return (_rl_rubout_char (-count, key)); - - if (rl_point == rl_end) - { - rl_ding (); - return 1; - } - - if (count > 1 || rl_explicit_arg) - { - xpoint = rl_point; - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_forward_char (count, key); - else - rl_forward_byte (count, key); - - rl_kill_text (xpoint, rl_point); - rl_point = xpoint; - } - else - { - xpoint = MB_NEXTCHAR (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - rl_delete_text (rl_point, xpoint); - } - return 0; -} - -/* Delete the character under the cursor, unless the insertion - point is at the end of the line, in which case the character - behind the cursor is deleted. COUNT is obeyed and may be used - to delete forward or backward that many characters. */ -int -rl_rubout_or_delete (int count, int key) -{ - if (rl_end != 0 && rl_point == rl_end) - return (_rl_rubout_char (count, key)); - else - return (rl_delete (count, key)); -} - -/* Delete all spaces and tabs around point. */ -int -rl_delete_horizontal_space (int count, int ignore) -{ - int start; - - while (rl_point && whitespace (rl_line_buffer[rl_point - 1])) - rl_point--; - - start = rl_point; - - while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) - rl_point++; - - if (start != rl_point) - { - rl_delete_text (start, rl_point); - rl_point = start; - } - - if (rl_point < 0) - rl_point = 0; - - return 0; -} - -/* Like the tcsh editing function delete-char-or-list. The eof character - is caught before this is invoked, so this really does the same thing as - delete-char-or-list-or-eof, as long as it's bound to the eof character. */ -int -rl_delete_or_show_completions (int count, int key) -{ - if (rl_end != 0 && rl_point == rl_end) - return (rl_possible_completions (count, key)); - else - return (rl_delete (count, key)); -} - -#ifndef RL_COMMENT_BEGIN_DEFAULT -#define RL_COMMENT_BEGIN_DEFAULT "#" -#endif - -/* Turn the current line into a comment in shell history. - A K*rn shell style function. */ -int -rl_insert_comment (int count, int key) -{ - char *rl_comment_text; - int rl_comment_len; - - rl_beg_of_line (1, key); - rl_comment_text = _rl_comment_begin ? _rl_comment_begin : RL_COMMENT_BEGIN_DEFAULT; - - if (rl_explicit_arg == 0) - rl_insert_text (rl_comment_text); - else - { - rl_comment_len = strlen (rl_comment_text); - if (STREQN (rl_comment_text, rl_line_buffer, rl_comment_len)) - rl_delete_text (rl_point, rl_point + rl_comment_len); - else - rl_insert_text (rl_comment_text); - } - - (*rl_redisplay_function) (); - rl_newline (1, '\n'); - - return (0); -} - -/* **************************************************************** */ -/* */ -/* Changing Case */ -/* */ -/* **************************************************************** */ - -/* The three kinds of things that we know how to do. */ -#define UpCase 1 -#define DownCase 2 -#define CapCase 3 - -/* Uppercase the word at point. */ -int -rl_upcase_word (int count, int key) -{ - return (rl_change_case (count, UpCase)); -} - -/* Lowercase the word at point. */ -int -rl_downcase_word (int count, int key) -{ - return (rl_change_case (count, DownCase)); -} - -/* Upcase the first letter, downcase the rest. */ -int -rl_capitalize_word (int count, int key) -{ - return (rl_change_case (count, CapCase)); -} - -/* The meaty function. - Change the case of COUNT words, performing OP on them. - OP is one of UpCase, DownCase, or CapCase. - If a negative argument is given, leave point where it started, - otherwise, leave it where it moves to. */ -static int -rl_change_case (int count, int op) -{ - int start, next, end; - int inword, nc, nop; - wchar_t c; -#if defined (HANDLE_MULTIBYTE) - wchar_t wc, nwc; - char mb[MB_LEN_MAX+1]; - int mlen; - size_t m; - mbstate_t mps; -#endif - - start = rl_point; - rl_forward_word (count, 0); - end = rl_point; - - if (op != UpCase && op != DownCase && op != CapCase) - { - rl_ding (); - return 1; - } - - if (count < 0) - SWAP (start, end); - -#if defined (HANDLE_MULTIBYTE) - memset (&mps, 0, sizeof (mbstate_t)); -#endif - - /* We are going to modify some text, so let's prepare to undo it. */ - rl_modifying (start, end); - - inword = 0; - while (start < end) - { - c = _rl_char_value (rl_line_buffer, start); - /* This assumes that the upper and lower case versions are the same width. */ - next = MB_NEXTCHAR (rl_line_buffer, start, 1, MB_FIND_NONZERO); - - if (_rl_walphabetic (c) == 0) - { - inword = 0; - start = next; - continue; - } - - if (op == CapCase) - { - nop = inword ? DownCase : UpCase; - inword = 1; - } - else - nop = op; - /* Can't check isascii here; some languages (e.g, Turkish) have - multibyte upper and lower case equivalents of single-byte ascii - characters */ - if (MB_CUR_MAX == 1 || rl_byte_oriented) - { - nc = (nop == UpCase) ? _rl_to_upper (c) : _rl_to_lower (c); - rl_line_buffer[start] = nc; - } -#if defined (HANDLE_MULTIBYTE) - else - { - m = mbrtowc (&wc, rl_line_buffer + start, end - start, &mps); - if (MB_INVALIDCH (m)) - wc = (wchar_t)rl_line_buffer[start]; - else if (MB_NULLWCH (m)) - wc = L'\0'; - nwc = (nop == UpCase) ? _rl_to_wupper (wc) : _rl_to_wlower (wc); - if (nwc != wc) /* just skip unchanged characters */ - { - char *s, *e; - mlen = wcrtomb (mb, nwc, &mps); - if (mlen > 0) - mb[mlen] = '\0'; - /* what to do if m != mlen? adjust below */ - /* m == length of old char, mlen == length of new char */ - s = rl_line_buffer + start; - e = rl_line_buffer + rl_end; - if (m == mlen) - memcpy (s, mb, mlen); - else if (m > mlen) - { - memcpy (s, mb, mlen); - memmove (s + mlen, s + m, (e - s) - m); - next -= m - mlen; /* next char changes */ - end -= m - mlen; /* end of word changes */ - rl_end -= m - mlen; /* end of line changes */ - rl_line_buffer[rl_end] = 0; - } - else if (m < mlen) - { - rl_extend_line_buffer (mlen - m + 1); - memmove (s + mlen, s + m, (e - s) - m); - memcpy (s, mb, mlen); - next += mlen - m; /* next char changes */ - end += mlen - m; /* end of word changes */ - rl_end += mlen - m; /* end of line changes */ - rl_line_buffer[rl_end] = 0; - } - } - } -#endif - - start = next; - } - - rl_point = end; - return 0; -} - -/* **************************************************************** */ -/* */ -/* Transposition */ -/* */ -/* **************************************************************** */ - -/* Transpose the words at point. If point is at the end of the line, - transpose the two words before point. */ -int -rl_transpose_words (int count, int key) -{ - char *word1, *word2; - int w1_beg, w1_end, w2_beg, w2_end; - int orig_point = rl_point; - - if (!count) - return 0; - - /* Find the two words. */ - rl_forward_word (count, key); - w2_end = rl_point; - rl_backward_word (1, key); - w2_beg = rl_point; - rl_backward_word (count, key); - w1_beg = rl_point; - rl_forward_word (1, key); - w1_end = rl_point; - - /* Do some check to make sure that there really are two words. */ - if ((w1_beg == w2_beg) || (w2_beg < w1_end)) - { - rl_ding (); - rl_point = orig_point; - return 1; - } - - /* Get the text of the words. */ - word1 = rl_copy_text (w1_beg, w1_end); - word2 = rl_copy_text (w2_beg, w2_end); - - /* We are about to do many insertions and deletions. Remember them - as one operation. */ - rl_begin_undo_group (); - - /* Do the stuff at word2 first, so that we don't have to worry - about word1 moving. */ - rl_point = w2_beg; - rl_delete_text (w2_beg, w2_end); - rl_insert_text (word1); - - rl_point = w1_beg; - rl_delete_text (w1_beg, w1_end); - rl_insert_text (word2); - - /* This is exactly correct since the text before this point has not - changed in length. */ - rl_point = w2_end; - - /* I think that does it. */ - rl_end_undo_group (); - xfree (word1); - xfree (word2); - - return 0; -} - -/* Transpose the characters at point. If point is at the end of the line, - then transpose the characters before point. */ -int -rl_transpose_chars (int count, int key) -{ -#if defined (HANDLE_MULTIBYTE) - char *dummy; - int i; -#else - char dummy[2]; -#endif - int char_length, prev_point; - - if (count == 0) - return 0; - - if (!rl_point || rl_end < 2) - { - rl_ding (); - return 1; - } - - rl_begin_undo_group (); - - if (rl_point == rl_end) - { - rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); - count = 1; - } - - prev_point = rl_point; - rl_point = MB_PREVCHAR (rl_line_buffer, rl_point, MB_FIND_NONZERO); - -#if defined (HANDLE_MULTIBYTE) - char_length = prev_point - rl_point; - dummy = (char *)xmalloc (char_length + 1); - for (i = 0; i < char_length; i++) - dummy[i] = rl_line_buffer[rl_point + i]; - dummy[i] = '\0'; -#else - dummy[0] = rl_line_buffer[rl_point]; - dummy[char_length = 1] = '\0'; -#endif - - rl_delete_text (rl_point, rl_point + char_length); - - rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); - - _rl_fix_point (0); - rl_insert_text (dummy); - rl_end_undo_group (); - -#if defined (HANDLE_MULTIBYTE) - xfree (dummy); -#endif - - return 0; -} - -/* **************************************************************** */ -/* */ -/* Character Searching */ -/* */ -/* **************************************************************** */ - -int -#if defined (HANDLE_MULTIBYTE) -_rl_char_search_internal (int count, int dir, char *smbchar, int len) -#else -_rl_char_search_internal (int count, int dir, int schar) -#endif -{ - int pos, inc; -#if defined (HANDLE_MULTIBYTE) - int prepos; -#endif - - if (dir == 0) - return 1; - - pos = rl_point; - inc = (dir < 0) ? -1 : 1; - while (count) - { - if ((dir < 0 && pos <= 0) || (dir > 0 && pos >= rl_end)) - { - rl_ding (); - return 1; - } - -#if defined (HANDLE_MULTIBYTE) - pos = (inc > 0) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY) - : _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY); -#else - pos += inc; -#endif - do - { -#if defined (HANDLE_MULTIBYTE) - if (_rl_is_mbchar_matched (rl_line_buffer, pos, rl_end, smbchar, len)) -#else - if (rl_line_buffer[pos] == schar) -#endif - { - count--; - if (dir < 0) - rl_point = (dir == BTO) ? _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY) - : pos; - else - rl_point = (dir == FTO) ? _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY) - : pos; - break; - } -#if defined (HANDLE_MULTIBYTE) - prepos = pos; -#endif - } -#if defined (HANDLE_MULTIBYTE) - while ((dir < 0) ? (pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY)) != prepos - : (pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY)) != prepos); -#else - while ((dir < 0) ? pos-- : ++pos < rl_end); -#endif - } - return (0); -} - -/* Search COUNT times for a character read from the current input stream. - FDIR is the direction to search if COUNT is non-negative; otherwise - the search goes in BDIR. So much is dependent on HANDLE_MULTIBYTE - that there are two separate versions of this function. */ -#if defined (HANDLE_MULTIBYTE) -static int -_rl_char_search (int count, int fdir, int bdir) -{ - char mbchar[MB_LEN_MAX]; - int mb_len; - - mb_len = _rl_read_mbchar (mbchar, MB_LEN_MAX); - - if (mb_len <= 0) - return 1; - - if (count < 0) - return (_rl_char_search_internal (-count, bdir, mbchar, mb_len)); - else - return (_rl_char_search_internal (count, fdir, mbchar, mb_len)); -} -#else /* !HANDLE_MULTIBYTE */ -static int -_rl_char_search (int count, int fdir, int bdir) -{ - int c; - - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (c < 0) - return 1; - - if (count < 0) - return (_rl_char_search_internal (-count, bdir, c)); - else - return (_rl_char_search_internal (count, fdir, c)); -} -#endif /* !HANDLE_MULTIBYTE */ - -#if defined (READLINE_CALLBACKS) -static int -_rl_char_search_callback (data) - _rl_callback_generic_arg *data; -{ - _rl_callback_func = 0; - _rl_want_redisplay = 1; - - return (_rl_char_search (data->count, data->i1, data->i2)); -} -#endif - -int -rl_char_search (int count, int key) -{ -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = _rl_callback_data_alloc (count); - _rl_callback_data->i1 = FFIND; - _rl_callback_data->i2 = BFIND; - _rl_callback_func = _rl_char_search_callback; - return (0); - } -#endif - - return (_rl_char_search (count, FFIND, BFIND)); -} - -int -rl_backward_char_search (int count, int key) -{ -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = _rl_callback_data_alloc (count); - _rl_callback_data->i1 = BFIND; - _rl_callback_data->i2 = FFIND; - _rl_callback_func = _rl_char_search_callback; - return (0); - } -#endif - - return (_rl_char_search (count, BFIND, FFIND)); -} - -/* **************************************************************** */ -/* */ -/* The Mark and the Region. */ -/* */ -/* **************************************************************** */ - -/* Set the mark at POSITION. */ -int -_rl_set_mark_at_pos (int position) -{ - if (position < 0 || position > rl_end) - return 1; - - rl_mark = position; - return 0; -} - -/* A bindable command to set the mark. */ -int -rl_set_mark (int count, int key) -{ - return (_rl_set_mark_at_pos (rl_explicit_arg ? count : rl_point)); -} - -/* Exchange the position of mark and point. */ -int -rl_exchange_point_and_mark (int count, int key) -{ - if (rl_mark > rl_end) - rl_mark = -1; - - if (rl_mark < 0) - { - rl_ding (); - rl_mark = 0; /* like _RL_FIX_POINT */ - return 1; - } - else - SWAP (rl_point, rl_mark); - - return 0; -} diff --git a/readline/tilde.c b/readline/tilde.c deleted file mode 100644 index 9d0f29614b..0000000000 --- a/readline/tilde.c +++ /dev/null @@ -1,493 +0,0 @@ -/* tilde.c -- Tilde expansion code (~/foo := $HOME/foo). */ - -/* Copyright (C) 1988-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#if defined (HAVE_UNISTD_H) -# ifdef _MINIX -# include -# endif -# include -#endif - -#if defined (HAVE_STRING_H) -# include -#else /* !HAVE_STRING_H */ -# include -#endif /* !HAVE_STRING_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include -#if defined (HAVE_PWD_H) -#include -#endif - -#include "tilde.h" - -#if defined (TEST) || defined (STATIC_MALLOC) -static void *xmalloc (), *xrealloc (); -#else -# include "xmalloc.h" -#endif /* TEST || STATIC_MALLOC */ - -#if !defined (HAVE_GETPW_DECLS) -# if defined (HAVE_GETPWUID) -extern struct passwd *getpwuid PARAMS((uid_t)); -# endif -# if defined (HAVE_GETPWNAM) -extern struct passwd *getpwnam PARAMS((const char *)); -# endif -#endif /* !HAVE_GETPW_DECLS */ - -#if !defined (savestring) -#define savestring(x) strcpy ((char *)xmalloc (1 + strlen (x)), (x)) -#endif /* !savestring */ - -#if !defined (NULL) -# if defined (__STDC__) -# define NULL ((void *) 0) -# else -# define NULL 0x0 -# endif /* !__STDC__ */ -#endif /* !NULL */ - -/* If being compiled as part of bash, these will be satisfied from - variables.o. If being compiled as part of readline, they will - be satisfied from shell.o. */ -extern char *sh_get_home_dir PARAMS((void)); -extern char *sh_get_env_value PARAMS((const char *)); - -/* The default value of tilde_additional_prefixes. This is set to - whitespace preceding a tilde so that simple programs which do not - perform any word separation get desired behaviour. */ -static const char *default_prefixes[] = - { " ~", "\t~", (const char *)NULL }; - -/* The default value of tilde_additional_suffixes. This is set to - whitespace or newline so that simple programs which do not - perform any word separation get desired behaviour. */ -static const char *default_suffixes[] = - { " ", "\n", (const char *)NULL }; - -/* If non-null, this contains the address of a function that the application - wants called before trying the standard tilde expansions. The function - is called with the text sans tilde, and returns a malloc()'ed string - which is the expansion, or a NULL pointer if the expansion fails. */ -tilde_hook_func_t *tilde_expansion_preexpansion_hook = (tilde_hook_func_t *)NULL; - -/* If non-null, this contains the address of a function to call if the - standard meaning for expanding a tilde fails. The function is called - with the text (sans tilde, as in "foo"), and returns a malloc()'ed string - which is the expansion, or a NULL pointer if there is no expansion. */ -tilde_hook_func_t *tilde_expansion_failure_hook = (tilde_hook_func_t *)NULL; - -/* When non-null, this is a NULL terminated array of strings which - are duplicates for a tilde prefix. Bash uses this to expand - `=~' and `:~'. */ -char **tilde_additional_prefixes = (char **)default_prefixes; - -/* When non-null, this is a NULL terminated array of strings which match - the end of a username, instead of just "/". Bash sets this to - `:' and `=~'. */ -char **tilde_additional_suffixes = (char **)default_suffixes; - -static int tilde_find_prefix PARAMS((const char *, int *)); -static int tilde_find_suffix PARAMS((const char *)); -static char *isolate_tilde_prefix PARAMS((const char *, int *)); -static char *glue_prefix_and_suffix PARAMS((char *, const char *, int)); - -/* Find the start of a tilde expansion in STRING, and return the index of - the tilde which starts the expansion. Place the length of the text - which identified this tilde starter in LEN, excluding the tilde itself. */ -static int -tilde_find_prefix (const char *string, int *len) -{ - register int i, j, string_len; - register char **prefixes; - - prefixes = tilde_additional_prefixes; - - string_len = strlen (string); - *len = 0; - - if (*string == '\0' || *string == '~') - return (0); - - if (prefixes) - { - for (i = 0; i < string_len; i++) - { - for (j = 0; prefixes[j]; j++) - { - if (strncmp (string + i, prefixes[j], strlen (prefixes[j])) == 0) - { - *len = strlen (prefixes[j]) - 1; - return (i + *len); - } - } - } - } - return (string_len); -} - -/* Find the end of a tilde expansion in STRING, and return the index of - the character which ends the tilde definition. */ -static int -tilde_find_suffix (const char *string) -{ - register int i, j, string_len; - register char **suffixes; - - suffixes = tilde_additional_suffixes; - string_len = strlen (string); - - for (i = 0; i < string_len; i++) - { -#if defined (__MSDOS__) - if (string[i] == '/' || string[i] == '\\' /* || !string[i] */) -#else - if (string[i] == '/' /* || !string[i] */) -#endif - break; - - for (j = 0; suffixes && suffixes[j]; j++) - { - if (strncmp (string + i, suffixes[j], strlen (suffixes[j])) == 0) - return (i); - } - } - return (i); -} - -/* Return a new string which is the result of tilde expanding STRING. */ -char * -tilde_expand (const char *string) -{ - char *result; - int result_size, result_index; - - result_index = result_size = 0; - if (result = strchr (string, '~')) - result = (char *)xmalloc (result_size = (strlen (string) + 16)); - else - result = (char *)xmalloc (result_size = (strlen (string) + 1)); - - /* Scan through STRING expanding tildes as we come to them. */ - while (1) - { - register int start, end; - char *tilde_word, *expansion; - int len; - - /* Make START point to the tilde which starts the expansion. */ - start = tilde_find_prefix (string, &len); - - /* Copy the skipped text into the result. */ - if ((result_index + start + 1) > result_size) - result = (char *)xrealloc (result, 1 + (result_size += (start + 20))); - - strncpy (result + result_index, string, start); - result_index += start; - - /* Advance STRING to the starting tilde. */ - string += start; - - /* Make END be the index of one after the last character of the - username. */ - end = tilde_find_suffix (string); - - /* If both START and END are zero, we are all done. */ - if (!start && !end) - break; - - /* Expand the entire tilde word, and copy it into RESULT. */ - tilde_word = (char *)xmalloc (1 + end); - strncpy (tilde_word, string, end); - tilde_word[end] = '\0'; - string += end; - - expansion = tilde_expand_word (tilde_word); - - if (expansion == 0) - expansion = tilde_word; - else - xfree (tilde_word); - - len = strlen (expansion); -#ifdef __CYGWIN__ - /* Fix for Cygwin to prevent ~user/xxx from expanding to //xxx when - $HOME for `user' is /. On cygwin, // denotes a network drive. */ - if (len > 1 || *expansion != '/' || *string != '/') -#endif - { - if ((result_index + len + 1) > result_size) - result = (char *)xrealloc (result, 1 + (result_size += (len + 20))); - - strcpy (result + result_index, expansion); - result_index += len; - } - xfree (expansion); - } - - result[result_index] = '\0'; - - return (result); -} - -/* Take FNAME and return the tilde prefix we want expanded. If LENP is - non-null, the index of the end of the prefix into FNAME is returned in - the location it points to. */ -static char * -isolate_tilde_prefix (const char *fname, int *lenp) -{ - char *ret; - int i; - - ret = (char *)xmalloc (strlen (fname)); -#if defined (__MSDOS__) - for (i = 1; fname[i] && fname[i] != '/' && fname[i] != '\\'; i++) -#else - for (i = 1; fname[i] && fname[i] != '/'; i++) -#endif - ret[i - 1] = fname[i]; - ret[i - 1] = '\0'; - if (lenp) - *lenp = i; - return ret; -} - -#if 0 -/* Public function to scan a string (FNAME) beginning with a tilde and find - the portion of the string that should be passed to the tilde expansion - function. Right now, it just calls tilde_find_suffix and allocates new - memory, but it can be expanded to do different things later. */ -char * -tilde_find_word (const char *fname, int flags, int *lenp) -{ - int x; - char *r; - - x = tilde_find_suffix (fname); - if (x == 0) - { - r = savestring (fname); - if (lenp) - *lenp = 0; - } - else - { - r = (char *)xmalloc (1 + x); - strncpy (r, fname, x); - r[x] = '\0'; - if (lenp) - *lenp = x; - } - - return r; -} -#endif - -/* Return a string that is PREFIX concatenated with SUFFIX starting at - SUFFIND. */ -static char * -glue_prefix_and_suffix (char *prefix, const char *suffix, int suffind) -{ - char *ret; - int plen, slen; - - plen = (prefix && *prefix) ? strlen (prefix) : 0; - slen = strlen (suffix + suffind); - ret = (char *)xmalloc (plen + slen + 1); - if (plen) - strcpy (ret, prefix); - strcpy (ret + plen, suffix + suffind); - return ret; -} - -/* Do the work of tilde expansion on FILENAME. FILENAME starts with a - tilde. If there is no expansion, call tilde_expansion_failure_hook. - This always returns a newly-allocated string, never static storage. */ -char * -tilde_expand_word (const char *filename) -{ - char *dirname, *expansion, *username; - int user_len; - struct passwd *user_entry; - - if (filename == 0) - return ((char *)NULL); - - if (*filename != '~') - return (savestring (filename)); - - /* A leading `~/' or a bare `~' is *always* translated to the value of - $HOME or the home directory of the current user, regardless of any - preexpansion hook. */ - if (filename[1] == '\0' || filename[1] == '/') - { - /* Prefix $HOME to the rest of the string. */ - expansion = sh_get_env_value ("HOME"); -#if defined (_WIN32) - if (expansion == 0) - expansion = sh_get_env_value ("APPDATA"); -#endif - - /* If there is no HOME variable, look up the directory in - the password database. */ - if (expansion == 0) - expansion = sh_get_home_dir (); - - return (glue_prefix_and_suffix (expansion, filename, 1)); - } - - username = isolate_tilde_prefix (filename, &user_len); - - if (tilde_expansion_preexpansion_hook) - { - expansion = (*tilde_expansion_preexpansion_hook) (username); - if (expansion) - { - dirname = glue_prefix_and_suffix (expansion, filename, user_len); - xfree (username); - xfree (expansion); - return (dirname); - } - } - - /* No preexpansion hook, or the preexpansion hook failed. Look in the - password database. */ - dirname = (char *)NULL; -#if defined (HAVE_GETPWNAM) - user_entry = getpwnam (username); -#else - user_entry = 0; -#endif - if (user_entry == 0) - { - /* If the calling program has a special syntax for expanding tildes, - and we couldn't find a standard expansion, then let them try. */ - if (tilde_expansion_failure_hook) - { - expansion = (*tilde_expansion_failure_hook) (username); - if (expansion) - { - dirname = glue_prefix_and_suffix (expansion, filename, user_len); - xfree (expansion); - } - } - /* If we don't have a failure hook, or if the failure hook did not - expand the tilde, return a copy of what we were passed. */ - if (dirname == 0) - dirname = savestring (filename); - } -#if defined (HAVE_GETPWENT) - else - dirname = glue_prefix_and_suffix (user_entry->pw_dir, filename, user_len); -#endif - - xfree (username); -#if defined (HAVE_GETPWENT) - endpwent (); -#endif - return (dirname); -} - - -#if defined (TEST) -#undef NULL -#include - -main (int argc, char **argv) -{ - char *result, line[512]; - int done = 0; - - while (!done) - { - printf ("~expand: "); - fflush (stdout); - - if (!gets (line)) - strcpy (line, "done"); - - if ((strcmp (line, "done") == 0) || - (strcmp (line, "quit") == 0) || - (strcmp (line, "exit") == 0)) - { - done = 1; - break; - } - - result = tilde_expand (line); - printf (" --> %s\n", result); - free (result); - } - exit (0); -} - -static void memory_error_and_abort (void); - -static void * -xmalloc (size_t bytes) -{ - void *temp = (char *)malloc (bytes); - - if (!temp) - memory_error_and_abort (); - return (temp); -} - -static void * -xrealloc (void *pointer, int bytes) -{ - void *temp; - - if (!pointer) - temp = malloc (bytes); - else - temp = realloc (pointer, bytes); - - if (!temp) - memory_error_and_abort (); - - return (temp); -} - -static void -memory_error_and_abort (void) -{ - fprintf (stderr, "readline: out of virtual memory\n"); - abort (); -} - -/* - * Local variables: - * compile-command: "gcc -g -DTEST -o tilde tilde.c" - * end: - */ -#endif /* TEST */ diff --git a/readline/tilde.h b/readline/tilde.h deleted file mode 100644 index e26dd0476f..0000000000 --- a/readline/tilde.h +++ /dev/null @@ -1,80 +0,0 @@ -/* tilde.h: Externally available variables and function in libtilde.a. */ - -/* Copyright (C) 1992-2009 Free Software Foundation, Inc. - - This file contains the Readline Library (Readline), a set of - routines for providing Emacs style line input to programs that ask - for it. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_TILDE_H_) -# define _TILDE_H_ - -#ifdef __cplusplus -extern "C" { -#endif - -/* A function can be defined using prototypes and compile on both ANSI C - and traditional C compilers with something like this: - extern char *func PARAMS((char *, char *, int)); */ - -#if !defined (PARAMS) -# if defined (__STDC__) || defined (__GNUC__) || defined (__cplusplus) -# define PARAMS(protos) protos -# else -# define PARAMS(protos) () -# endif -#endif - -typedef char *tilde_hook_func_t PARAMS((char *)); - -/* If non-null, this contains the address of a function that the application - wants called before trying the standard tilde expansions. The function - is called with the text sans tilde, and returns a malloc()'ed string - which is the expansion, or a NULL pointer if the expansion fails. */ -extern tilde_hook_func_t *tilde_expansion_preexpansion_hook; - -/* If non-null, this contains the address of a function to call if the - standard meaning for expanding a tilde fails. The function is called - with the text (sans tilde, as in "foo"), and returns a malloc()'ed string - which is the expansion, or a NULL pointer if there is no expansion. */ -extern tilde_hook_func_t *tilde_expansion_failure_hook; - -/* When non-null, this is a NULL terminated array of strings which - are duplicates for a tilde prefix. Bash uses this to expand - `=~' and `:~'. */ -extern char **tilde_additional_prefixes; - -/* When non-null, this is a NULL terminated array of strings which match - the end of a username, instead of just "/". Bash sets this to - `:' and `=~'. */ -extern char **tilde_additional_suffixes; - -/* Return a new string which is the result of tilde expanding STRING. */ -extern char *tilde_expand PARAMS((const char *)); - -/* Do the work of tilde expansion on FILENAME. FILENAME starts with a - tilde. If there is no expansion, call tilde_expansion_failure_hook. */ -extern char *tilde_expand_word PARAMS((const char *)); - -/* Find the portion of the string beginning with ~ that should be expanded. */ -extern char *tilde_find_word PARAMS((const char *, int, int *)); - -#ifdef __cplusplus -} -#endif - -#endif /* _TILDE_H_ */ diff --git a/readline/undo.c b/readline/undo.c deleted file mode 100644 index ae65d38043..0000000000 --- a/readline/undo.c +++ /dev/null @@ -1,365 +0,0 @@ -/* undo.c - manage list of changes to lines, offering opportunity to undo them */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_UNISTD_H) -# include /* for _POSIX_VERSION */ -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" - -/* Some standard library routines. */ -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -extern void _hs_replace_history_data PARAMS((int, histdata_t *, histdata_t *)); - -extern HIST_ENTRY *_rl_saved_line_for_history; - -/* Non-zero tells rl_delete_text and rl_insert_text to not add to - the undo list. */ -int _rl_doing_an_undo = 0; - -/* How many unclosed undo groups we currently have. */ -int _rl_undo_group_level = 0; - -/* The current undo list for THE_LINE. */ -UNDO_LIST *rl_undo_list = (UNDO_LIST *)NULL; - -/* **************************************************************** */ -/* */ -/* Undo, and Undoing */ -/* */ -/* **************************************************************** */ - -static UNDO_LIST * -alloc_undo_entry (enum undo_code what, int start, int end, char *text) -{ - UNDO_LIST *temp; - - temp = (UNDO_LIST *)xmalloc (sizeof (UNDO_LIST)); - temp->what = what; - temp->start = start; - temp->end = end; - temp->text = text; - - temp->next = (UNDO_LIST *)NULL; - return temp; -} - -/* Remember how to undo something. Concatenate some undos if that - seems right. */ -void -rl_add_undo (enum undo_code what, int start, int end, char *text) -{ - UNDO_LIST *temp; - - temp = alloc_undo_entry (what, start, end, text); - temp->next = rl_undo_list; - rl_undo_list = temp; -} - -/* Free an UNDO_LIST */ -void -_rl_free_undo_list (UNDO_LIST *ul) -{ - UNDO_LIST *release; - - while (ul) - { - release = ul; - ul = ul->next; - - if (release->what == UNDO_DELETE) - xfree (release->text); - - xfree (release); - } -} - -/* Free the existing undo list. */ -void -rl_free_undo_list (void) -{ - UNDO_LIST *release, *orig_list; - - orig_list = rl_undo_list; - _rl_free_undo_list (rl_undo_list); - rl_undo_list = (UNDO_LIST *)NULL; - _hs_replace_history_data (-1, (histdata_t *)orig_list, (histdata_t *)NULL); -} - -UNDO_LIST * -_rl_copy_undo_entry (UNDO_LIST *entry) -{ - UNDO_LIST *new; - - new = alloc_undo_entry (entry->what, entry->start, entry->end, (char *)NULL); - new->text = entry->text ? savestring (entry->text) : 0; - return new; -} - -UNDO_LIST * -_rl_copy_undo_list (UNDO_LIST *head) -{ - UNDO_LIST *list, *new, *roving, *c; - - if (head == 0) - return head; - - list = head; - new = 0; - while (list) - { - c = _rl_copy_undo_entry (list); - if (new == 0) - roving = new = c; - else - { - roving->next = c; - roving = roving->next; - } - list = list->next; - } - - roving->next = 0; - return new; -} - -/* Undo the next thing in the list. Return 0 if there - is nothing to undo, or non-zero if there was. */ -int -rl_do_undo (void) -{ - UNDO_LIST *release, *search; - int waiting_for_begin, start, end; - HIST_ENTRY *cur, *temp; - -#define TRANS(i) ((i) == -1 ? rl_point : ((i) == -2 ? rl_end : (i))) - - start = end = waiting_for_begin = 0; - do - { - if (rl_undo_list == 0) - return (0); - - _rl_doing_an_undo = 1; - RL_SETSTATE(RL_STATE_UNDOING); - - /* To better support vi-mode, a start or end value of -1 means - rl_point, and a value of -2 means rl_end. */ - if (rl_undo_list->what == UNDO_DELETE || rl_undo_list->what == UNDO_INSERT) - { - start = TRANS (rl_undo_list->start); - end = TRANS (rl_undo_list->end); - } - - switch (rl_undo_list->what) - { - /* Undoing deletes means inserting some text. */ - case UNDO_DELETE: - rl_point = start; - rl_insert_text (rl_undo_list->text); - xfree (rl_undo_list->text); - break; - - /* Undoing inserts means deleting some text. */ - case UNDO_INSERT: - rl_delete_text (start, end); - rl_point = start; - break; - - /* Undoing an END means undoing everything 'til we get to a BEGIN. */ - case UNDO_END: - waiting_for_begin++; - break; - - /* Undoing a BEGIN means that we are done with this group. */ - case UNDO_BEGIN: - if (waiting_for_begin) - waiting_for_begin--; - else - rl_ding (); - break; - } - - _rl_doing_an_undo = 0; - RL_UNSETSTATE(RL_STATE_UNDOING); - - release = rl_undo_list; - rl_undo_list = rl_undo_list->next; - release->next = 0; /* XXX */ - - /* If we are editing a history entry, make sure the change is replicated - in the history entry's line */ - cur = current_history (); - if (cur && cur->data && (UNDO_LIST *)cur->data == release) - { - temp = replace_history_entry (where_history (), rl_line_buffer, (histdata_t)rl_undo_list); - xfree (temp->line); - FREE (temp->timestamp); - xfree (temp); - } - - /* Make sure there aren't any history entries with that undo list */ - _hs_replace_history_data (-1, (histdata_t *)release, (histdata_t *)rl_undo_list); - - /* And make sure this list isn't anywhere in the saved line for history */ - if (_rl_saved_line_for_history && _rl_saved_line_for_history->data) - { - /* Brute force; no finesse here */ - search = (UNDO_LIST *)_rl_saved_line_for_history->data; - if (search == release) - _rl_saved_line_for_history->data = rl_undo_list; - else - { - while (search->next) - { - if (search->next == release) - { - search->next = rl_undo_list; - break; - } - search = search->next; - } - } - } - - xfree (release); - } - while (waiting_for_begin); - - return (1); -} -#undef TRANS - -int -_rl_fix_last_undo_of_type (int type, int start, int end) -{ - UNDO_LIST *rl; - - for (rl = rl_undo_list; rl; rl = rl->next) - { - if (rl->what == type) - { - rl->start = start; - rl->end = end; - return 0; - } - } - return 1; -} - -/* Begin a group. Subsequent undos are undone as an atomic operation. */ -int -rl_begin_undo_group (void) -{ - rl_add_undo (UNDO_BEGIN, 0, 0, 0); - _rl_undo_group_level++; - return 0; -} - -/* End an undo group started with rl_begin_undo_group (). */ -int -rl_end_undo_group (void) -{ - rl_add_undo (UNDO_END, 0, 0, 0); - _rl_undo_group_level--; - return 0; -} - -/* Save an undo entry for the text from START to END. */ -int -rl_modifying (int start, int end) -{ - if (start > end) - { - SWAP (start, end); - } - - if (start != end) - { - char *temp = rl_copy_text (start, end); - rl_begin_undo_group (); - rl_add_undo (UNDO_DELETE, start, end, temp); - rl_add_undo (UNDO_INSERT, start, end, (char *)NULL); - rl_end_undo_group (); - } - return 0; -} - -/* Revert the current line to its previous state. */ -int -rl_revert_line (int count, int key) -{ - if (rl_undo_list == 0) - rl_ding (); - else - { - while (rl_undo_list) - rl_do_undo (); -#if defined (VI_MODE) - if (rl_editing_mode == vi_mode) - rl_point = rl_mark = 0; /* rl_end should be set correctly */ -#endif - } - - return 0; -} - -/* Do some undoing of things that were done. */ -int -rl_undo_command (int count, int key) -{ - if (count < 0) - return 0; /* Nothing to do. */ - - while (count) - { - if (rl_do_undo ()) - count--; - else - { - rl_ding (); - break; - } - } - return 0; -} diff --git a/readline/util.c b/readline/util.c deleted file mode 100644 index e8ae9d7f56..0000000000 --- a/readline/util.c +++ /dev/null @@ -1,578 +0,0 @@ -/* util.c -- readline utility functions */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include -#include -#include "posixjmp.h" - -#if defined (HAVE_UNISTD_H) -# include /* for _POSIX_VERSION */ -#endif /* HAVE_UNISTD_H */ - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include -#include - -/* System-specific feature definitions and include files. */ -#include "rldefs.h" -#include "rlmbutil.h" - -#if defined (TIOCSTAT_IN_SYS_IOCTL) -# include -#endif /* TIOCSTAT_IN_SYS_IOCTL */ - -/* Some standard library routines. */ -#include "readline.h" - -#include "rlprivate.h" -#include "xmalloc.h" -#include "rlshell.h" - -/* **************************************************************** */ -/* */ -/* Utility Functions */ -/* */ -/* **************************************************************** */ - -/* Return 0 if C is not a member of the class of characters that belong - in words, or 1 if it is. */ - -int _rl_allow_pathname_alphabetic_chars = 0; -static const char * const pathname_alphabetic_chars = "/-_=~.#$"; - -int -rl_alphabetic (int c) -{ - if (ALPHABETIC (c)) - return (1); - - return (_rl_allow_pathname_alphabetic_chars && - strchr (pathname_alphabetic_chars, c) != NULL); -} - -#if defined (HANDLE_MULTIBYTE) -int -_rl_walphabetic (wchar_t wc) -{ - int c; - - if (iswalnum (wc)) - return (1); - - c = wc & 0177; - return (_rl_allow_pathname_alphabetic_chars && - strchr (pathname_alphabetic_chars, c) != NULL); -} -#endif - -/* How to abort things. */ -int -_rl_abort_internal (void) -{ - rl_ding (); - rl_clear_message (); - _rl_reset_argument (); - rl_clear_pending_input (); - - RL_UNSETSTATE (RL_STATE_MACRODEF); - while (rl_executing_macro) - _rl_pop_executing_macro (); - - RL_UNSETSTATE (RL_STATE_MULTIKEY); /* XXX */ - - rl_last_func = (rl_command_func_t *)NULL; - - _rl_longjmp (_rl_top_level, 1); - return (0); -} - -int -rl_abort (int count, int key) -{ - return (_rl_abort_internal ()); -} - -int -_rl_null_function (int count, int key) -{ - return 0; -} - -int -rl_tty_status (int count, int key) -{ -#if defined (TIOCSTAT) - ioctl (1, TIOCSTAT, (char *)0); - rl_refresh_line (count, key); -#else - rl_ding (); -#endif - return 0; -} - -/* Return a copy of the string between FROM and TO. - FROM is inclusive, TO is not. */ -char * -rl_copy_text (int from, int to) -{ - register int length; - char *copy; - - /* Fix it if the caller is confused. */ - if (from > to) - SWAP (from, to); - - length = to - from; - copy = (char *)xmalloc (1 + length); - strncpy (copy, rl_line_buffer + from, length); - copy[length] = '\0'; - return (copy); -} - -/* Increase the size of RL_LINE_BUFFER until it has enough space to hold - LEN characters. */ -void -rl_extend_line_buffer (int len) -{ - while (len >= rl_line_buffer_len) - { - rl_line_buffer_len += DEFAULT_BUFFER_SIZE; - rl_line_buffer = (char *)xrealloc (rl_line_buffer, rl_line_buffer_len); - } - - _rl_set_the_line (); -} - - -/* A function for simple tilde expansion. */ -int -rl_tilde_expand (int ignore, int key) -{ - register int start, end; - char *homedir, *temp; - int len; - - end = rl_point; - start = end - 1; - - if (rl_point == rl_end && rl_line_buffer[rl_point] == '~') - { - homedir = tilde_expand ("~"); - _rl_replace_text (homedir, start, end); - xfree (homedir); - return (0); - } - else if (start >= 0 && rl_line_buffer[start] != '~') - { - for (; start >= 0 && !whitespace (rl_line_buffer[start]); start--) - ; - start++; - } - else if (start < 0) - start = 0; - - end = start; - do - end++; - while (whitespace (rl_line_buffer[end]) == 0 && end < rl_end); - - if (whitespace (rl_line_buffer[end]) || end >= rl_end) - end--; - - /* If the first character of the current word is a tilde, perform - tilde expansion and insert the result. If not a tilde, do - nothing. */ - if (rl_line_buffer[start] == '~') - { - len = end - start + 1; - temp = (char *)xmalloc (len + 1); - strncpy (temp, rl_line_buffer + start, len); - temp[len] = '\0'; - homedir = tilde_expand (temp); - xfree (temp); - - _rl_replace_text (homedir, start, end); - xfree (homedir); - } - - return (0); -} - -#if defined (USE_VARARGS) -void -#if defined (PREFER_STDARG) -_rl_ttymsg (const char *format, ...) -#else -_rl_ttymsg (va_alist) - va_dcl -#endif -{ - va_list args; -#if defined (PREFER_VARARGS) - char *format; -#endif - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - - fprintf (stderr, "readline: "); - vfprintf (stderr, format, args); - fprintf (stderr, "\n"); - fflush (stderr); - - va_end (args); - - rl_forced_update_display (); -} - -void -#if defined (PREFER_STDARG) -_rl_errmsg (const char *format, ...) -#else -_rl_errmsg (va_alist) - va_dcl -#endif -{ - va_list args; -#if defined (PREFER_VARARGS) - char *format; -#endif - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - - fprintf (stderr, "readline: "); - vfprintf (stderr, format, args); - fprintf (stderr, "\n"); - fflush (stderr); - - va_end (args); -} - -#else /* !USE_VARARGS */ -void -_rl_ttymsg (format, arg1, arg2) - char *format; -{ - fprintf (stderr, "readline: "); - fprintf (stderr, format, arg1, arg2); - fprintf (stderr, "\n"); - - rl_forced_update_display (); -} - -void -_rl_errmsg (format, arg1, arg2) - char *format; -{ - fprintf (stderr, "readline: "); - fprintf (stderr, format, arg1, arg2); - fprintf (stderr, "\n"); -} -#endif /* !USE_VARARGS */ - -/* **************************************************************** */ -/* */ -/* String Utility Functions */ -/* */ -/* **************************************************************** */ - -/* Determine if s2 occurs in s1. If so, return a pointer to the - match in s1. The compare is case insensitive. */ -char * -_rl_strindex (const char *s1, const char *s2) -{ - register int i, l, len; - - for (i = 0, l = strlen (s2), len = strlen (s1); (len - i) >= l; i++) - if (_rl_strnicmp (s1 + i, s2, l) == 0) - return ((char *) (s1 + i)); - return ((char *)NULL); -} - -#ifndef HAVE_STRPBRK -/* Find the first occurrence in STRING1 of any character from STRING2. - Return a pointer to the character in STRING1. */ -char * -_rl_strpbrk (const char *string1, const char *string2) -{ - register const char *scan; -#if defined (HANDLE_MULTIBYTE) - mbstate_t ps; - register int i, v; - - memset (&ps, 0, sizeof (mbstate_t)); -#endif - - for (; *string1; string1++) - { - for (scan = string2; *scan; scan++) - { - if (*string1 == *scan) - return ((char *)string1); - } -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - v = _rl_get_char_len (string1, &ps); - if (v > 1) - string1 += v - 1; /* -1 to account for auto-increment in loop */ - } -#endif - } - return ((char *)NULL); -} -#endif - -#if !defined (HAVE_STRCASECMP) -/* Compare at most COUNT characters from string1 to string2. Case - doesn't matter (strncasecmp). */ -int -_rl_strnicmp (const char *string1, const char *string2, int count) -{ - register const char *s1; - register const char *s2; - register int d; - - if (count <= 0 || (string1 == string2)) - return 0; - - s1 = string1; - s2 = string2; - do - { - d = _rl_to_lower (*s1) - _rl_to_lower (*s2); /* XXX - cast to unsigned char? */ - if (d != 0) - return d; - if (*s1++ == '\0') - break; - s2++; - } - while (--count != 0); - - return (0); -} - -/* strcmp (), but caseless (strcasecmp). */ -int -_rl_stricmp (const char *string1, const char *string2) -{ - register const char *s1; - register const char *s2; - register int d; - - s1 = string1; - s2 = string2; - - if (s1 == s2) - return 0; - - while ((d = _rl_to_lower (*s1) - _rl_to_lower (*s2)) == 0) - { - if (*s1++ == '\0') - return 0; - s2++; - } - - return (d); -} -#endif /* !HAVE_STRCASECMP */ - -/* Stupid comparison routine for qsort () ing strings. */ -int -_rl_qsort_string_compare (char **s1, char **s2) -{ -#if defined (HAVE_STRCOLL) - return (strcoll (*s1, *s2)); -#else - int result; - - result = **s1 - **s2; - if (result == 0) - result = strcmp (*s1, *s2); - - return result; -#endif -} - -/* Function equivalents for the macros defined in chardefs.h. */ -#define FUNCTION_FOR_MACRO(f) int (f) (int c) { return f (c); } - -FUNCTION_FOR_MACRO (_rl_digit_p) -FUNCTION_FOR_MACRO (_rl_digit_value) -FUNCTION_FOR_MACRO (_rl_lowercase_p) -FUNCTION_FOR_MACRO (_rl_pure_alphabetic) -FUNCTION_FOR_MACRO (_rl_to_lower) -FUNCTION_FOR_MACRO (_rl_to_upper) -FUNCTION_FOR_MACRO (_rl_uppercase_p) - -/* A convenience function, to force memory deallocation to be performed - by readline. DLLs on Windows apparently require this. */ -void -rl_free (void *mem) -{ - if (mem) - free (mem); -} - -/* Backwards compatibility, now that savestring has been removed from - all `public' readline header files. */ -#undef _rl_savestring -char * -_rl_savestring (const char *s) -{ - return (strcpy ((char *)xmalloc (1 + (int)strlen (s)), (s))); -} - -#if defined (DEBUG) -#if defined (USE_VARARGS) -static FILE *_rl_tracefp; - -void -#if defined (PREFER_STDARG) -_rl_trace (const char *format, ...) -#else -_rl_trace (va_alist) - va_dcl -#endif -{ - va_list args; -#if defined (PREFER_VARARGS) - char *format; -#endif - -#if defined (PREFER_STDARG) - va_start (args, format); -#else - va_start (args); - format = va_arg (args, char *); -#endif - - if (_rl_tracefp == 0) - _rl_tropen (); - vfprintf (_rl_tracefp, format, args); - fprintf (_rl_tracefp, "\n"); - fflush (_rl_tracefp); - - va_end (args); -} - -int -_rl_tropen (void) -{ - char fnbuf[128], *x; - - if (_rl_tracefp) - fclose (_rl_tracefp); -#if defined (_WIN32) && !defined (__CYGWIN__) - /* Windows doesn't have /var/tmp, so open the trace file in the - user's temporary directory instead. */ - snprintf (fnbuf, sizeof (fnbuf), "%s/rltrace.%ld", - (sh_get_env_value ("TEMP") - ? sh_get_env_value ("TEMP") - : "."), - getpid ()); -#else - sprintf (fnbuf, "/var/tmp/rltrace.%ld", (long) getpid ()); -#endif - unlink (fnbuf); - _rl_tracefp = fopen (fnbuf, "w+"); - return _rl_tracefp != 0; -} - -int -_rl_trclose (void) -{ - int r; - - r = fclose (_rl_tracefp); - _rl_tracefp = 0; - return r; -} - -void -_rl_settracefp (FILE *fp) -{ - _rl_tracefp = fp; -} -#endif -#endif /* DEBUG */ - - -#if HAVE_DECL_AUDIT_USER_TTY && defined (HAVE_LIBAUDIT_H) && defined (ENABLE_TTY_AUDIT_SUPPORT) -#include -#include -#include -#include - -/* Report STRING to the audit system. */ -void -_rl_audit_tty (char *string) -{ - struct audit_message req; - struct sockaddr_nl addr; - size_t size; - int fd; - - fd = socket (PF_NETLINK, SOCK_RAW, NETLINK_AUDIT); - if (fd < 0) - return; - size = strlen (string) + 1; - - if (NLMSG_SPACE (size) > MAX_AUDIT_MESSAGE_LENGTH) - return; - - memset (&req, 0, sizeof(req)); - req.nlh.nlmsg_len = NLMSG_SPACE (size); - req.nlh.nlmsg_type = AUDIT_USER_TTY; - req.nlh.nlmsg_flags = NLM_F_REQUEST; - req.nlh.nlmsg_seq = 0; - if (size && string) - memcpy (NLMSG_DATA(&req.nlh), string, size); - memset (&addr, 0, sizeof(addr)); - - addr.nl_family = AF_NETLINK; - addr.nl_pid = 0; - addr.nl_groups = 0; - - sendto (fd, &req, req.nlh.nlmsg_len, 0, (struct sockaddr*)&addr, sizeof(addr)); - close (fd); -} -#endif diff --git a/readline/vi_keymap.c b/readline/vi_keymap.c deleted file mode 100644 index 045258bd83..0000000000 --- a/readline/vi_keymap.c +++ /dev/null @@ -1,875 +0,0 @@ -/* vi_keymap.c -- the keymap for vi_mode in readline (). */ - -/* Copyright (C) 1987-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (BUFSIZ) -#include -#endif /* !BUFSIZ */ - -#include "readline.h" - -#if 0 -extern KEYMAP_ENTRY_ARRAY vi_escape_keymap; -#endif - -/* The keymap arrays for handling vi mode. */ -KEYMAP_ENTRY_ARRAY vi_movement_keymap = { - /* The regular control keys come first. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ - { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ - { ISFUNC, rl_emacs_editing_mode }, /* Control-e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ - { ISFUNC, rl_abort }, /* Control-g */ - { ISFUNC, rl_backward_char }, /* Control-h */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-i */ - { ISFUNC, rl_newline }, /* Control-j */ - { ISFUNC, rl_kill_line }, /* Control-k */ - { ISFUNC, rl_clear_screen }, /* Control-l */ - { ISFUNC, rl_newline }, /* Control-m */ - { ISFUNC, rl_get_next_history }, /* Control-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ - { ISFUNC, rl_get_previous_history }, /* Control-p */ - { ISFUNC, rl_quoted_insert }, /* Control-q */ - { ISFUNC, rl_reverse_search_history }, /* Control-r */ - { ISFUNC, rl_forward_search_history }, /* Control-s */ - { ISFUNC, rl_transpose_chars }, /* Control-t */ - { ISFUNC, rl_unix_line_discard }, /* Control-u */ - { ISFUNC, rl_quoted_insert }, /* Control-v */ - { ISFUNC, rl_vi_unix_word_rubout }, /* Control-w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-x */ - { ISFUNC, rl_yank }, /* Control-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ - - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-[ */ /* vi_escape_keymap */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ - { ISFUNC, rl_vi_undo }, /* Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, rl_forward_char }, /* SPACE */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ - { ISFUNC, rl_insert_comment }, /* # */ - { ISFUNC, rl_end_of_line }, /* $ */ - { ISFUNC, rl_vi_match }, /* % */ - { ISFUNC, rl_vi_tilde_expand }, /* & */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ( */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ) */ - { ISFUNC, rl_vi_complete }, /* * */ - { ISFUNC, rl_get_next_history}, /* + */ - { ISFUNC, rl_vi_char_search }, /* , */ - { ISFUNC, rl_get_previous_history }, /* - */ - { ISFUNC, rl_vi_redo }, /* . */ - { ISFUNC, rl_vi_search }, /* / */ - - /* Regular digits. */ - { ISFUNC, rl_beg_of_line }, /* 0 */ - { ISFUNC, rl_vi_arg_digit }, /* 1 */ - { ISFUNC, rl_vi_arg_digit }, /* 2 */ - { ISFUNC, rl_vi_arg_digit }, /* 3 */ - { ISFUNC, rl_vi_arg_digit }, /* 4 */ - { ISFUNC, rl_vi_arg_digit }, /* 5 */ - { ISFUNC, rl_vi_arg_digit }, /* 6 */ - { ISFUNC, rl_vi_arg_digit }, /* 7 */ - { ISFUNC, rl_vi_arg_digit }, /* 8 */ - { ISFUNC, rl_vi_arg_digit }, /* 9 */ - - /* A little more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ - { ISFUNC, rl_vi_char_search }, /* ; */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ - { ISFUNC, rl_vi_complete }, /* = */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ - { ISFUNC, rl_vi_search }, /* ? */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_vi_append_eol }, /* A */ - { ISFUNC, rl_vi_prev_word}, /* B */ - { ISFUNC, rl_vi_change_to }, /* C */ - { ISFUNC, rl_vi_delete_to }, /* D */ - { ISFUNC, rl_vi_end_word }, /* E */ - { ISFUNC, rl_vi_char_search }, /* F */ - { ISFUNC, rl_vi_fetch_history }, /* G */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* H */ - { ISFUNC, rl_vi_insert_beg }, /* I */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* J */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* K */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* L */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* M */ - { ISFUNC, rl_vi_search_again }, /* N */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* O */ - { ISFUNC, rl_vi_put }, /* P */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Q */ - { ISFUNC, rl_vi_replace }, /* R */ - { ISFUNC, rl_vi_subst }, /* S */ - { ISFUNC, rl_vi_char_search }, /* T */ - { ISFUNC, rl_revert_line }, /* U */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* V */ - { ISFUNC, rl_vi_next_word }, /* W */ - { ISFUNC, rl_vi_rubout }, /* X */ - { ISFUNC, rl_vi_yank_to }, /* Y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Z */ - - /* Some more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* [ */ - { ISFUNC, rl_vi_complete }, /* \ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ - { ISFUNC, rl_vi_first_print }, /* ^ */ - { ISFUNC, rl_vi_yank_arg }, /* _ */ - { ISFUNC, rl_vi_goto_mark }, /* ` */ - - /* Lowercase alphabet. */ - { ISFUNC, rl_vi_append_mode }, /* a */ - { ISFUNC, rl_vi_prev_word }, /* b */ - { ISFUNC, rl_vi_change_to }, /* c */ - { ISFUNC, rl_vi_delete_to }, /* d */ - { ISFUNC, rl_vi_end_word }, /* e */ - { ISFUNC, rl_vi_char_search }, /* f */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ - { ISFUNC, rl_backward_char }, /* h */ - { ISFUNC, rl_vi_insert_mode }, /* i */ - { ISFUNC, rl_get_next_history }, /* j */ - { ISFUNC, rl_get_previous_history }, /* k */ - { ISFUNC, rl_forward_char }, /* l */ - { ISFUNC, rl_vi_set_mark }, /* m */ - { ISFUNC, rl_vi_search_again }, /* n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* o */ - { ISFUNC, rl_vi_put }, /* p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ - { ISFUNC, rl_vi_change_char }, /* r */ - { ISFUNC, rl_vi_subst }, /* s */ - { ISFUNC, rl_vi_char_search }, /* t */ - { ISFUNC, rl_vi_undo }, /* u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ - { ISFUNC, rl_vi_next_word }, /* w */ - { ISFUNC, rl_vi_delete }, /* x */ - { ISFUNC, rl_vi_yank_to }, /* y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ - - /* Final punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ - { ISFUNC, rl_vi_column }, /* | */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ - { ISFUNC, rl_vi_change_case }, /* ~ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* RUBOUT */ - -#if KEYMAP_SIZE > 128 - /* Undefined keys. */ - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 } -#endif /* KEYMAP_SIZE > 128 */ -}; - -KEYMAP_ENTRY_ARRAY vi_insertion_keymap = { - /* The regular control keys come first. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ - { ISFUNC, rl_insert }, /* Control-a */ - { ISFUNC, rl_insert }, /* Control-b */ - { ISFUNC, rl_insert }, /* Control-c */ - { ISFUNC, rl_vi_eof_maybe }, /* Control-d */ - { ISFUNC, rl_insert }, /* Control-e */ - { ISFUNC, rl_insert }, /* Control-f */ - { ISFUNC, rl_insert }, /* Control-g */ - { ISFUNC, rl_rubout }, /* Control-h */ - { ISFUNC, rl_complete }, /* Control-i */ - { ISFUNC, rl_newline }, /* Control-j */ - { ISFUNC, rl_insert }, /* Control-k */ - { ISFUNC, rl_insert }, /* Control-l */ - { ISFUNC, rl_newline }, /* Control-m */ - { ISFUNC, rl_menu_complete}, /* Control-n */ - { ISFUNC, rl_insert }, /* Control-o */ - { ISFUNC, rl_backward_menu_complete }, /* Control-p */ - { ISFUNC, rl_insert }, /* Control-q */ - { ISFUNC, rl_reverse_search_history }, /* Control-r */ - { ISFUNC, rl_forward_search_history }, /* Control-s */ - { ISFUNC, rl_transpose_chars }, /* Control-t */ - { ISFUNC, rl_unix_line_discard }, /* Control-u */ - { ISFUNC, rl_quoted_insert }, /* Control-v */ - { ISFUNC, rl_vi_unix_word_rubout }, /* Control-w */ - { ISFUNC, rl_insert }, /* Control-x */ - { ISFUNC, rl_yank }, /* Control-y */ - { ISFUNC, rl_insert }, /* Control-z */ - - { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ - { ISFUNC, rl_insert }, /* Control-\ */ - { ISFUNC, rl_insert }, /* Control-] */ - { ISFUNC, rl_insert }, /* Control-^ */ - { ISFUNC, rl_vi_undo }, /* Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, rl_insert }, /* SPACE */ - { ISFUNC, rl_insert }, /* ! */ - { ISFUNC, rl_insert }, /* " */ - { ISFUNC, rl_insert }, /* # */ - { ISFUNC, rl_insert }, /* $ */ - { ISFUNC, rl_insert }, /* % */ - { ISFUNC, rl_insert }, /* & */ - { ISFUNC, rl_insert }, /* ' */ - { ISFUNC, rl_insert }, /* ( */ - { ISFUNC, rl_insert }, /* ) */ - { ISFUNC, rl_insert }, /* * */ - { ISFUNC, rl_insert }, /* + */ - { ISFUNC, rl_insert }, /* , */ - { ISFUNC, rl_insert }, /* - */ - { ISFUNC, rl_insert }, /* . */ - { ISFUNC, rl_insert }, /* / */ - - /* Regular digits. */ - { ISFUNC, rl_insert }, /* 0 */ - { ISFUNC, rl_insert }, /* 1 */ - { ISFUNC, rl_insert }, /* 2 */ - { ISFUNC, rl_insert }, /* 3 */ - { ISFUNC, rl_insert }, /* 4 */ - { ISFUNC, rl_insert }, /* 5 */ - { ISFUNC, rl_insert }, /* 6 */ - { ISFUNC, rl_insert }, /* 7 */ - { ISFUNC, rl_insert }, /* 8 */ - { ISFUNC, rl_insert }, /* 9 */ - - /* A little more punctuation. */ - { ISFUNC, rl_insert }, /* : */ - { ISFUNC, rl_insert }, /* ; */ - { ISFUNC, rl_insert }, /* < */ - { ISFUNC, rl_insert }, /* = */ - { ISFUNC, rl_insert }, /* > */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* @ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_insert }, /* A */ - { ISFUNC, rl_insert }, /* B */ - { ISFUNC, rl_insert }, /* C */ - { ISFUNC, rl_insert }, /* D */ - { ISFUNC, rl_insert }, /* E */ - { ISFUNC, rl_insert }, /* F */ - { ISFUNC, rl_insert }, /* G */ - { ISFUNC, rl_insert }, /* H */ - { ISFUNC, rl_insert }, /* I */ - { ISFUNC, rl_insert }, /* J */ - { ISFUNC, rl_insert }, /* K */ - { ISFUNC, rl_insert }, /* L */ - { ISFUNC, rl_insert }, /* M */ - { ISFUNC, rl_insert }, /* N */ - { ISFUNC, rl_insert }, /* O */ - { ISFUNC, rl_insert }, /* P */ - { ISFUNC, rl_insert }, /* Q */ - { ISFUNC, rl_insert }, /* R */ - { ISFUNC, rl_insert }, /* S */ - { ISFUNC, rl_insert }, /* T */ - { ISFUNC, rl_insert }, /* U */ - { ISFUNC, rl_insert }, /* V */ - { ISFUNC, rl_insert }, /* W */ - { ISFUNC, rl_insert }, /* X */ - { ISFUNC, rl_insert }, /* Y */ - { ISFUNC, rl_insert }, /* Z */ - - /* Some more punctuation. */ - { ISFUNC, rl_insert }, /* [ */ - { ISFUNC, rl_insert }, /* \ */ - { ISFUNC, rl_insert }, /* ] */ - { ISFUNC, rl_insert }, /* ^ */ - { ISFUNC, rl_insert }, /* _ */ - { ISFUNC, rl_insert }, /* ` */ - - /* Lowercase alphabet. */ - { ISFUNC, rl_insert }, /* a */ - { ISFUNC, rl_insert }, /* b */ - { ISFUNC, rl_insert }, /* c */ - { ISFUNC, rl_insert }, /* d */ - { ISFUNC, rl_insert }, /* e */ - { ISFUNC, rl_insert }, /* f */ - { ISFUNC, rl_insert }, /* g */ - { ISFUNC, rl_insert }, /* h */ - { ISFUNC, rl_insert }, /* i */ - { ISFUNC, rl_insert }, /* j */ - { ISFUNC, rl_insert }, /* k */ - { ISFUNC, rl_insert }, /* l */ - { ISFUNC, rl_insert }, /* m */ - { ISFUNC, rl_insert }, /* n */ - { ISFUNC, rl_insert }, /* o */ - { ISFUNC, rl_insert }, /* p */ - { ISFUNC, rl_insert }, /* q */ - { ISFUNC, rl_insert }, /* r */ - { ISFUNC, rl_insert }, /* s */ - { ISFUNC, rl_insert }, /* t */ - { ISFUNC, rl_insert }, /* u */ - { ISFUNC, rl_insert }, /* v */ - { ISFUNC, rl_insert }, /* w */ - { ISFUNC, rl_insert }, /* x */ - { ISFUNC, rl_insert }, /* y */ - { ISFUNC, rl_insert }, /* z */ - - /* Final punctuation. */ - { ISFUNC, rl_insert }, /* { */ - { ISFUNC, rl_insert }, /* | */ - { ISFUNC, rl_insert }, /* } */ - { ISFUNC, rl_insert }, /* ~ */ - { ISFUNC, rl_rubout }, /* RUBOUT */ - -#if KEYMAP_SIZE > 128 - /* Pure 8-bit characters (128 - 159). - These might be used in some - character sets. */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - { ISFUNC, rl_insert }, /* ? */ - - /* ISO Latin-1 characters (160 - 255) */ - { ISFUNC, rl_insert }, /* No-break space */ - { ISFUNC, rl_insert }, /* Inverted exclamation mark */ - { ISFUNC, rl_insert }, /* Cent sign */ - { ISFUNC, rl_insert }, /* Pound sign */ - { ISFUNC, rl_insert }, /* Currency sign */ - { ISFUNC, rl_insert }, /* Yen sign */ - { ISFUNC, rl_insert }, /* Broken bar */ - { ISFUNC, rl_insert }, /* Section sign */ - { ISFUNC, rl_insert }, /* Diaeresis */ - { ISFUNC, rl_insert }, /* Copyright sign */ - { ISFUNC, rl_insert }, /* Feminine ordinal indicator */ - { ISFUNC, rl_insert }, /* Left pointing double angle quotation mark */ - { ISFUNC, rl_insert }, /* Not sign */ - { ISFUNC, rl_insert }, /* Soft hyphen */ - { ISFUNC, rl_insert }, /* Registered sign */ - { ISFUNC, rl_insert }, /* Macron */ - { ISFUNC, rl_insert }, /* Degree sign */ - { ISFUNC, rl_insert }, /* Plus-minus sign */ - { ISFUNC, rl_insert }, /* Superscript two */ - { ISFUNC, rl_insert }, /* Superscript three */ - { ISFUNC, rl_insert }, /* Acute accent */ - { ISFUNC, rl_insert }, /* Micro sign */ - { ISFUNC, rl_insert }, /* Pilcrow sign */ - { ISFUNC, rl_insert }, /* Middle dot */ - { ISFUNC, rl_insert }, /* Cedilla */ - { ISFUNC, rl_insert }, /* Superscript one */ - { ISFUNC, rl_insert }, /* Masculine ordinal indicator */ - { ISFUNC, rl_insert }, /* Right pointing double angle quotation mark */ - { ISFUNC, rl_insert }, /* Vulgar fraction one quarter */ - { ISFUNC, rl_insert }, /* Vulgar fraction one half */ - { ISFUNC, rl_insert }, /* Vulgar fraction three quarters */ - { ISFUNC, rl_insert }, /* Inverted questionk mark */ - { ISFUNC, rl_insert }, /* Latin capital letter a with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter a with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter a with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter a with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter a with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter a with ring above */ - { ISFUNC, rl_insert }, /* Latin capital letter ae */ - { ISFUNC, rl_insert }, /* Latin capital letter c with cedilla */ - { ISFUNC, rl_insert }, /* Latin capital letter e with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter e with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter e with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter e with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter i with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter i with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter i with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter i with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter eth (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin capital letter n with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter o with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter o with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter o with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter o with tilde */ - { ISFUNC, rl_insert }, /* Latin capital letter o with diaeresis */ - { ISFUNC, rl_insert }, /* Multiplication sign */ - { ISFUNC, rl_insert }, /* Latin capital letter o with stroke */ - { ISFUNC, rl_insert }, /* Latin capital letter u with grave */ - { ISFUNC, rl_insert }, /* Latin capital letter u with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter u with circumflex */ - { ISFUNC, rl_insert }, /* Latin capital letter u with diaeresis */ - { ISFUNC, rl_insert }, /* Latin capital letter Y with acute */ - { ISFUNC, rl_insert }, /* Latin capital letter thorn (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin small letter sharp s (German) */ - { ISFUNC, rl_insert }, /* Latin small letter a with grave */ - { ISFUNC, rl_insert }, /* Latin small letter a with acute */ - { ISFUNC, rl_insert }, /* Latin small letter a with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter a with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter a with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter a with ring above */ - { ISFUNC, rl_insert }, /* Latin small letter ae */ - { ISFUNC, rl_insert }, /* Latin small letter c with cedilla */ - { ISFUNC, rl_insert }, /* Latin small letter e with grave */ - { ISFUNC, rl_insert }, /* Latin small letter e with acute */ - { ISFUNC, rl_insert }, /* Latin small letter e with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter e with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter i with grave */ - { ISFUNC, rl_insert }, /* Latin small letter i with acute */ - { ISFUNC, rl_insert }, /* Latin small letter i with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter i with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter eth (Icelandic) */ - { ISFUNC, rl_insert }, /* Latin small letter n with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter o with grave */ - { ISFUNC, rl_insert }, /* Latin small letter o with acute */ - { ISFUNC, rl_insert }, /* Latin small letter o with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter o with tilde */ - { ISFUNC, rl_insert }, /* Latin small letter o with diaeresis */ - { ISFUNC, rl_insert }, /* Division sign */ - { ISFUNC, rl_insert }, /* Latin small letter o with stroke */ - { ISFUNC, rl_insert }, /* Latin small letter u with grave */ - { ISFUNC, rl_insert }, /* Latin small letter u with acute */ - { ISFUNC, rl_insert }, /* Latin small letter u with circumflex */ - { ISFUNC, rl_insert }, /* Latin small letter u with diaeresis */ - { ISFUNC, rl_insert }, /* Latin small letter y with acute */ - { ISFUNC, rl_insert }, /* Latin small letter thorn (Icelandic) */ - { ISFUNC, rl_insert } /* Latin small letter y with diaeresis */ -#endif /* KEYMAP_SIZE > 128 */ -}; - -/* Unused for the time being. */ -#if 0 -KEYMAP_ENTRY_ARRAY vi_escape_keymap = { - /* The regular control keys come first. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-@ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-c */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-d */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-f */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-g */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-h */ - { ISFUNC, rl_tab_insert}, /* Control-i */ - { ISFUNC, rl_emacs_editing_mode}, /* Control-j */ - { ISFUNC, rl_kill_line }, /* Control-k */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-l */ - { ISFUNC, rl_emacs_editing_mode}, /* Control-m */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-n */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-o */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-q */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-s */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-t */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-x */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-z */ - - { ISFUNC, rl_vi_movement_mode }, /* Control-[ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-\ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* Control-^ */ - { ISFUNC, rl_vi_undo }, /* Control-_ */ - - /* The start of printing characters. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* SPACE */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ! */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* " */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* # */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* $ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* % */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* & */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ' */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ( */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ) */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* * */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* + */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* , */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* - */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* . */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* / */ - - /* Regular digits. */ - { ISFUNC, rl_vi_arg_digit }, /* 0 */ - { ISFUNC, rl_vi_arg_digit }, /* 1 */ - { ISFUNC, rl_vi_arg_digit }, /* 2 */ - { ISFUNC, rl_vi_arg_digit }, /* 3 */ - { ISFUNC, rl_vi_arg_digit }, /* 4 */ - { ISFUNC, rl_vi_arg_digit }, /* 5 */ - { ISFUNC, rl_vi_arg_digit }, /* 6 */ - { ISFUNC, rl_vi_arg_digit }, /* 7 */ - { ISFUNC, rl_vi_arg_digit }, /* 8 */ - { ISFUNC, rl_vi_arg_digit }, /* 9 */ - - /* A little more punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* : */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ; */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* < */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* = */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* > */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ? */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* @ */ - - /* Uppercase alphabet. */ - { ISFUNC, rl_do_lowercase_version }, /* A */ - { ISFUNC, rl_do_lowercase_version }, /* B */ - { ISFUNC, rl_do_lowercase_version }, /* C */ - { ISFUNC, rl_do_lowercase_version }, /* D */ - { ISFUNC, rl_do_lowercase_version }, /* E */ - { ISFUNC, rl_do_lowercase_version }, /* F */ - { ISFUNC, rl_do_lowercase_version }, /* G */ - { ISFUNC, rl_do_lowercase_version }, /* H */ - { ISFUNC, rl_do_lowercase_version }, /* I */ - { ISFUNC, rl_do_lowercase_version }, /* J */ - { ISFUNC, rl_do_lowercase_version }, /* K */ - { ISFUNC, rl_do_lowercase_version }, /* L */ - { ISFUNC, rl_do_lowercase_version }, /* M */ - { ISFUNC, rl_do_lowercase_version }, /* N */ - { ISFUNC, rl_do_lowercase_version }, /* O */ - { ISFUNC, rl_do_lowercase_version }, /* P */ - { ISFUNC, rl_do_lowercase_version }, /* Q */ - { ISFUNC, rl_do_lowercase_version }, /* R */ - { ISFUNC, rl_do_lowercase_version }, /* S */ - { ISFUNC, rl_do_lowercase_version }, /* T */ - { ISFUNC, rl_do_lowercase_version }, /* U */ - { ISFUNC, rl_do_lowercase_version }, /* V */ - { ISFUNC, rl_do_lowercase_version }, /* W */ - { ISFUNC, rl_do_lowercase_version }, /* X */ - { ISFUNC, rl_do_lowercase_version }, /* Y */ - { ISFUNC, rl_do_lowercase_version }, /* Z */ - - /* Some more punctuation. */ - { ISFUNC, rl_arrow_keys }, /* [ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* \ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ] */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ^ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* _ */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ` */ - - /* Lowercase alphabet. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* a */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* b */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* c */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* d */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* e */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* f */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* g */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* h */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* i */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* j */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* k */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* l */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* m */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* n */ - { ISFUNC, rl_arrow_keys }, /* o */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* p */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* q */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* r */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* s */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* t */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* u */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* v */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* w */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* x */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* y */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* z */ - - /* Final punctuation. */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* { */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* | */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* } */ - { ISFUNC, (rl_command_func_t *)0x0 }, /* ~ */ - { ISFUNC, rl_backward_kill_word }, /* RUBOUT */ - -#if KEYMAP_SIZE > 128 - /* Undefined keys. */ - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 }, - { ISFUNC, (rl_command_func_t *)0x0 } -#endif /* KEYMAP_SIZE > 128 */ -}; -#endif diff --git a/readline/vi_mode.c b/readline/vi_mode.c deleted file mode 100644 index 836371c95f..0000000000 --- a/readline/vi_mode.c +++ /dev/null @@ -1,2314 +0,0 @@ -/* vi_mode.c -- A vi emulation mode for Bash. - Derived from code written by Jeff Sparkes (jsparkes@bnr.ca). */ - -/* Copyright (C) 1987-2018 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -/* **************************************************************** */ -/* */ -/* VI Emulation Mode */ -/* */ -/* **************************************************************** */ -#include "rlconf.h" - -#if defined (VI_MODE) - -#if defined (HAVE_CONFIG_H) -# include -#endif - -#include - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#if defined (HAVE_UNISTD_H) -# include -#endif - -#include - -/* Some standard library routines. */ -#include "rldefs.h" -#include "rlmbutil.h" - -#include "readline.h" -#include "history.h" - -#include "rlprivate.h" -#include "xmalloc.h" - -#ifndef member -#define member(c, s) ((c) ? (char *)strchr ((s), (c)) != (char *)NULL : 0) -#endif - -/* Increment START to the next character in RL_LINE_BUFFER, handling multibyte chars */ -#if defined (HANDLE_MULTIBYTE) -#define INCREMENT_POS(start) \ - do { \ - if (MB_CUR_MAX == 1 || rl_byte_oriented) \ - start++; \ - else \ - start = _rl_find_next_mbchar (rl_line_buffer, start, 1, MB_FIND_ANY); \ - } while (0) -#else /* !HANDLE_MULTIBYTE */ -#define INCREMENT_POS(start) (start)++ -#endif /* !HANDLE_MULTIBYTE */ - -/* This is global so other parts of the code can check whether the last - command was a text modification command. */ -int _rl_vi_last_command = 'i'; /* default `.' puts you in insert mode */ - -_rl_vimotion_cxt *_rl_vimvcxt = 0; - -/* Non-zero indicates we are redoing a vi-mode command with `.' */ -int _rl_vi_redoing; - -/* Non-zero means enter insertion mode. */ -static int _rl_vi_doing_insert; - -/* Command keys which do movement for xxx_to commands. */ -static const char * const vi_motion = " hl^$0ftFT;,%wbeWBE|`"; - -/* Keymap used for vi replace characters. Created dynamically since - rarely used. */ -static Keymap vi_replace_map; - -/* The number of characters inserted in the last replace operation. */ -static int vi_replace_count; - -/* If non-zero, we have text inserted after a c[motion] command that put - us implicitly into insert mode. Some people want this text to be - attached to the command so that it is `redoable' with `.'. */ -static int vi_continued_command; -static char *vi_insert_buffer; -static int vi_insert_buffer_size; - -static int _rl_vi_last_repeat = 1; -static int _rl_vi_last_arg_sign = 1; -static int _rl_vi_last_motion; -#if defined (HANDLE_MULTIBYTE) -static char _rl_vi_last_search_mbchar[MB_LEN_MAX]; -static int _rl_vi_last_search_mblen; -#else -static int _rl_vi_last_search_char; -#endif -static char _rl_vi_last_replacement[MB_LEN_MAX+1]; /* reserve for trailing NULL */ - -static int _rl_vi_last_key_before_insert; - -/* Text modification commands. These are the `redoable' commands. */ -static const char * const vi_textmod = "_*\\AaIiCcDdPpYyRrSsXx~"; - -/* Arrays for the saved marks. */ -static int vi_mark_chars['z' - 'a' + 1]; - -static void _rl_vi_replace_insert PARAMS((int)); -static void _rl_vi_save_replace PARAMS((void)); -static void _rl_vi_stuff_insert PARAMS((int)); -static void _rl_vi_save_insert PARAMS((UNDO_LIST *)); - -static void vi_save_insert_buffer PARAMS ((int, int)); - -static inline void _rl_vi_backup PARAMS((void)); - -static int _rl_vi_arg_dispatch PARAMS((int)); -static int rl_digit_loop1 PARAMS((void)); - -static int _rl_vi_set_mark PARAMS((void)); -static int _rl_vi_goto_mark PARAMS((void)); - -static inline int _rl_vi_advance_point PARAMS((void)); -static inline int _rl_vi_backup_point PARAMS((void)); - -static void _rl_vi_append_forward PARAMS((int)); - -static int _rl_vi_callback_getchar PARAMS((char *, int)); - -#if defined (READLINE_CALLBACKS) -static int _rl_vi_callback_set_mark PARAMS((_rl_callback_generic_arg *)); -static int _rl_vi_callback_goto_mark PARAMS((_rl_callback_generic_arg *)); -static int _rl_vi_callback_change_char PARAMS((_rl_callback_generic_arg *)); -static int _rl_vi_callback_char_search PARAMS((_rl_callback_generic_arg *)); -#endif - -static int rl_domove_read_callback PARAMS((_rl_vimotion_cxt *)); -static int rl_domove_motion_callback PARAMS((_rl_vimotion_cxt *)); -static int rl_vi_domove_getchar PARAMS((_rl_vimotion_cxt *)); - -static int vi_change_dispatch PARAMS((_rl_vimotion_cxt *)); -static int vi_delete_dispatch PARAMS((_rl_vimotion_cxt *)); -static int vi_yank_dispatch PARAMS((_rl_vimotion_cxt *)); - -static int vidomove_dispatch PARAMS((_rl_vimotion_cxt *)); - -void -_rl_vi_initialize_line (void) -{ - register int i, n; - - n = sizeof (vi_mark_chars) / sizeof (vi_mark_chars[0]); - for (i = 0; i < n; i++) - vi_mark_chars[i] = -1; - - RL_UNSETSTATE(RL_STATE_VICMDONCE); -} - -void -_rl_vi_reset_last (void) -{ - _rl_vi_last_command = 'i'; - _rl_vi_last_repeat = 1; - _rl_vi_last_arg_sign = 1; - _rl_vi_last_motion = 0; -} - -void -_rl_vi_set_last (int key, int repeat, int sign) -{ - _rl_vi_last_command = key; - _rl_vi_last_repeat = repeat; - _rl_vi_last_arg_sign = sign; -} - -/* A convenience function that calls _rl_vi_set_last to save the last command - information and enters insertion mode. */ -void -rl_vi_start_inserting (int key, int repeat, int sign) -{ - _rl_vi_set_last (key, repeat, sign); - rl_begin_undo_group (); /* ensure inserts aren't concatenated */ - rl_vi_insertion_mode (1, key); -} - -/* Is the command C a VI mode text modification command? */ -int -_rl_vi_textmod_command (int c) -{ - return (member (c, vi_textmod)); -} - -int -_rl_vi_motion_command (int c) -{ - return (member (c, vi_motion)); -} - -static void -_rl_vi_replace_insert (int count) -{ - int nchars; - - nchars = strlen (vi_insert_buffer); - - rl_begin_undo_group (); - while (count--) - /* nchars-1 to compensate for _rl_replace_text using `end+1' in call - to rl_delete_text */ - _rl_replace_text (vi_insert_buffer, rl_point, rl_point+nchars-1); - rl_end_undo_group (); -} - -static void -_rl_vi_stuff_insert (int count) -{ - rl_begin_undo_group (); - while (count--) - rl_insert_text (vi_insert_buffer); - rl_end_undo_group (); -} - -/* Bound to `.'. Called from command mode, so we know that we have to - redo a text modification command. The default for _rl_vi_last_command - puts you back into insert mode. */ -int -rl_vi_redo (int count, int c) -{ - int r; - - if (rl_explicit_arg == 0) - { - rl_numeric_arg = _rl_vi_last_repeat; - rl_arg_sign = _rl_vi_last_arg_sign; - } - - r = 0; - _rl_vi_redoing = 1; - /* If we're redoing an insert with `i', stuff in the inserted text - and do not go into insertion mode. */ - if (_rl_vi_last_command == 'i' && vi_insert_buffer && *vi_insert_buffer) - { - _rl_vi_stuff_insert (count); - /* And back up point over the last character inserted. */ - if (rl_point > 0) - _rl_vi_backup (); - } - else if (_rl_vi_last_command == 'R' && vi_insert_buffer && *vi_insert_buffer) - { - _rl_vi_replace_insert (count); - /* And back up point over the last character inserted. */ - if (rl_point > 0) - _rl_vi_backup (); - } - /* Ditto for redoing an insert with `I', but move to the beginning of the - line like the `I' command does. */ - else if (_rl_vi_last_command == 'I' && vi_insert_buffer && *vi_insert_buffer) - { - rl_beg_of_line (1, 'I'); - _rl_vi_stuff_insert (count); - if (rl_point > 0) - _rl_vi_backup (); - } - /* Ditto for redoing an insert with `a', but move forward a character first - like the `a' command does. */ - else if (_rl_vi_last_command == 'a' && vi_insert_buffer && *vi_insert_buffer) - { - _rl_vi_append_forward ('a'); - _rl_vi_stuff_insert (count); - if (rl_point > 0) - _rl_vi_backup (); - } - /* Ditto for redoing an insert with `A', but move to the end of the line - like the `A' command does. */ - else if (_rl_vi_last_command == 'A' && vi_insert_buffer && *vi_insert_buffer) - { - rl_end_of_line (1, 'A'); - _rl_vi_stuff_insert (count); - if (rl_point > 0) - _rl_vi_backup (); - } - else - r = _rl_dispatch (_rl_vi_last_command, _rl_keymap); - - _rl_vi_redoing = 0; - - return (r); -} - -/* A placeholder for further expansion. */ -int -rl_vi_undo (int count, int key) -{ - return (rl_undo_command (count, key)); -} - -/* Yank the nth arg from the previous line into this line at point. */ -int -rl_vi_yank_arg (int count, int key) -{ - /* Readline thinks that the first word on a line is the 0th, while vi - thinks the first word on a line is the 1st. Compensate. */ - if (rl_explicit_arg) - rl_yank_nth_arg (count - 1, 0); - else - rl_yank_nth_arg ('$', 0); - - return (0); -} - -/* With an argument, move back that many history lines, else move to the - beginning of history. */ -int -rl_vi_fetch_history (int count, int c) -{ - int wanted; - - /* Giving an argument of n means we want the nth command in the history - file. The command number is interpreted the same way that the bash - `history' command does it -- that is, giving an argument count of 450 - to this command would get the command listed as number 450 in the - output of `history'. */ - if (rl_explicit_arg) - { - wanted = history_base + where_history () - count; - if (wanted <= 0) - rl_beginning_of_history (0, 0); - else - rl_get_previous_history (wanted, c); - } - else - rl_beginning_of_history (count, 0); - return (0); -} - -/* Search again for the last thing searched for. */ -int -rl_vi_search_again (int count, int key) -{ - switch (key) - { - case 'n': - rl_noninc_reverse_search_again (count, key); - break; - - case 'N': - rl_noninc_forward_search_again (count, key); - break; - } - return (0); -} - -/* Do a vi style search. */ -int -rl_vi_search (int count, int key) -{ - switch (key) - { - case '?': - _rl_free_saved_history_line (); - rl_noninc_forward_search (count, key); - break; - - case '/': - _rl_free_saved_history_line (); - rl_noninc_reverse_search (count, key); - break; - - default: - rl_ding (); - break; - } - return (0); -} - -/* Completion, from vi's point of view. */ -int -rl_vi_complete (int ignore, int key) -{ - if ((rl_point < rl_end) && (!whitespace (rl_line_buffer[rl_point]))) - { - if (!whitespace (rl_line_buffer[rl_point + 1])) - rl_vi_end_word (1, 'E'); - _rl_vi_advance_point (); - } - - if (key == '*') - rl_complete_internal ('*'); /* Expansion and replacement. */ - else if (key == '=') - rl_complete_internal ('?'); /* List possible completions. */ - else if (key == '\\') - rl_complete_internal (TAB); /* Standard Readline completion. */ - else - rl_complete (0, key); - - if (key == '*' || key == '\\') - rl_vi_start_inserting (key, 1, rl_arg_sign); - - return (0); -} - -/* Tilde expansion for vi mode. */ -int -rl_vi_tilde_expand (int ignore, int key) -{ - rl_tilde_expand (0, key); - rl_vi_start_inserting (key, 1, rl_arg_sign); - return (0); -} - -/* Previous word in vi mode. */ -int -rl_vi_prev_word (int count, int key) -{ - if (count < 0) - return (rl_vi_next_word (-count, key)); - - if (rl_point == 0) - { - rl_ding (); - return (0); - } - - if (_rl_uppercase_p (key)) - rl_vi_bWord (count, key); - else - rl_vi_bword (count, key); - - return (0); -} - -/* Next word in vi mode. */ -int -rl_vi_next_word (int count, int key) -{ - if (count < 0) - return (rl_vi_prev_word (-count, key)); - - if (rl_point >= (rl_end - 1)) - { - rl_ding (); - return (0); - } - - if (_rl_uppercase_p (key)) - rl_vi_fWord (count, key); - else - rl_vi_fword (count, key); - return (0); -} - -static inline int -_rl_vi_advance_point (void) -{ - int point; - - point = rl_point; - if (rl_point < rl_end) -#if defined (HANDLE_MULTIBYTE) - { - if (MB_CUR_MAX == 1 || rl_byte_oriented) - rl_point++; - else - { - point = rl_point; - rl_point = _rl_forward_char_internal (1); - if (point == rl_point || rl_point > rl_end) - rl_point = rl_end; - } - } -#else - rl_point++; -#endif - - return point; -} - -/* Move the cursor back one character. */ -static inline void -_rl_vi_backup (void) -{ - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); - else - rl_point--; -} - -/* Move the point back one character, returning the starting value and not - doing anything at the beginning of the line */ -static inline int -_rl_vi_backup_point (void) -{ - int point; - - point = rl_point; - if (rl_point > 0) -#if defined (HANDLE_MULTIBYTE) - { - if (MB_CUR_MAX == 1 || rl_byte_oriented) - rl_point--; - else - { - point = rl_point; - rl_point = _rl_backward_char_internal (1); - if (rl_point < 0) - rl_point = 0; /* XXX - not really necessary */ - } - } -#else - rl_point--; -#endif - return point; -} - -/* Move to the end of the ?next? word. */ -int -rl_vi_end_word (int count, int key) -{ - if (count < 0) - { - rl_ding (); - return 1; - } - - if (_rl_uppercase_p (key)) - rl_vi_eWord (count, key); - else - rl_vi_eword (count, key); - return (0); -} - -/* Move forward a word the way that 'W' does. */ -int -rl_vi_fWord (int count, int ignore) -{ - while (count-- && rl_point < (rl_end - 1)) - { - /* Skip until whitespace. */ - while (!whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) - _rl_vi_advance_point (); - - /* Now skip whitespace. */ - while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) - _rl_vi_advance_point (); - } - return (0); -} - -int -rl_vi_bWord (int count, int ignore) -{ - while (count-- && rl_point > 0) - { - /* If we are at the start of a word, move back to whitespace so - we will go back to the start of the previous word. */ - if (!whitespace (rl_line_buffer[rl_point]) && - whitespace (rl_line_buffer[rl_point - 1])) - rl_point--; - - while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) - _rl_vi_backup_point (); - - if (rl_point > 0) - { - do - _rl_vi_backup_point (); - while (rl_point > 0 && !whitespace (rl_line_buffer[rl_point])); - if (rl_point > 0) /* hit whitespace */ - rl_point++; - - if (rl_point < 0) - rl_point = 0; - } - } - return (0); -} - -int -rl_vi_eWord (int count, int ignore) -{ - int opoint; - - while (count-- && rl_point < (rl_end - 1)) - { - if (whitespace (rl_line_buffer[rl_point]) == 0) - _rl_vi_advance_point (); - - /* Move to the next non-whitespace character (to the start of the - next word). */ - while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) - _rl_vi_advance_point (); - - if (rl_point && rl_point < rl_end) - { - opoint = rl_point; - - /* Skip whitespace. */ - while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) - opoint = _rl_vi_advance_point (); /* XXX - why? */ - - /* Skip until whitespace. */ - while (rl_point < rl_end && !whitespace (rl_line_buffer[rl_point])) - opoint = _rl_vi_advance_point (); - - /* Move back to the last character of the word. */ - rl_point = opoint; - } - } - return (0); -} - -int -rl_vi_fword (int count, int ignore) -{ - int opoint; - - while (count-- && rl_point < (rl_end - 1)) - { - /* Move to white space (really non-identifer). */ - if (_rl_isident (rl_line_buffer[rl_point])) - { - while (_rl_isident (rl_line_buffer[rl_point]) && rl_point < rl_end) - _rl_vi_advance_point (); - } - else /* if (!whitespace (rl_line_buffer[rl_point])) */ - { - while (!_rl_isident (rl_line_buffer[rl_point]) && - !whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) - _rl_vi_advance_point (); - } - - opoint = rl_point; - - /* Move past whitespace. */ - while (whitespace (rl_line_buffer[rl_point]) && rl_point < rl_end) - opoint = _rl_vi_advance_point (); - } - return (0); -} - -int -rl_vi_bword (int count, int ignore) -{ - int opoint; - - while (count-- && rl_point > 0) - { - int prev_is_ident, cur_is_ident; - - /* If we are at the start of a word, move back to whitespace - so we will go back to the start of the previous word. */ - if (!whitespace (rl_line_buffer[rl_point]) && - whitespace (rl_line_buffer[rl_point - 1])) - if (--rl_point == 0) - break; - - /* If this character and the previous character are `opposite', move - back so we don't get messed up by the rl_point++ down there in - the while loop. Without this code, words like `l;' screw up the - function. */ - cur_is_ident = _rl_isident (rl_line_buffer[rl_point]); - opoint = _rl_vi_backup_point (); - prev_is_ident = _rl_isident (rl_line_buffer[rl_point]); - if ((cur_is_ident && !prev_is_ident) || (!cur_is_ident && prev_is_ident)) - ; /* leave point alone, we backed it up one character */ - else - rl_point = opoint; - - while (rl_point > 0 && whitespace (rl_line_buffer[rl_point])) - _rl_vi_backup_point (); - - if (rl_point > 0) - { - opoint = rl_point; - if (_rl_isident (rl_line_buffer[rl_point])) - do - opoint = _rl_vi_backup_point (); - while (rl_point > 0 && _rl_isident (rl_line_buffer[rl_point])); - else - do - opoint = _rl_vi_backup_point (); - while (rl_point > 0 && !_rl_isident (rl_line_buffer[rl_point]) && - !whitespace (rl_line_buffer[rl_point])); - - if (rl_point > 0) - rl_point = opoint; - - if (rl_point < 0) - rl_point = 0; - } - } - return (0); -} - -int -rl_vi_eword (int count, int ignore) -{ - int opoint; - - while (count-- && rl_point < (rl_end - 1)) - { - if (whitespace (rl_line_buffer[rl_point]) == 0) - _rl_vi_advance_point (); - - while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) - _rl_vi_advance_point (); - - opoint = rl_point; - if (rl_point < rl_end) - { - if (_rl_isident (rl_line_buffer[rl_point])) - do - { - opoint = _rl_vi_advance_point (); - } - while (rl_point < rl_end && _rl_isident (rl_line_buffer[rl_point])); - else - do - { - opoint = _rl_vi_advance_point (); - } - while (rl_point < rl_end && !_rl_isident (rl_line_buffer[rl_point]) - && !whitespace (rl_line_buffer[rl_point])); - } - rl_point = opoint; - } - return (0); -} - -int -rl_vi_insert_beg (int count, int key) -{ - rl_beg_of_line (1, key); - rl_vi_insert_mode (1, key); - return (0); -} - -static void -_rl_vi_append_forward (int key) -{ - _rl_vi_advance_point (); -} - -int -rl_vi_append_mode (int count, int key) -{ - _rl_vi_append_forward (key); - rl_vi_start_inserting (key, 1, rl_arg_sign); - return (0); -} - -int -rl_vi_append_eol (int count, int key) -{ - rl_end_of_line (1, key); - rl_vi_append_mode (1, key); - return (0); -} - -/* What to do in the case of C-d. */ -int -rl_vi_eof_maybe (int count, int c) -{ - return (rl_newline (1, '\n')); -} - -/* Insertion mode stuff. */ - -/* Switching from one mode to the other really just involves - switching keymaps. */ -int -rl_vi_insertion_mode (int count, int key) -{ - _rl_keymap = vi_insertion_keymap; - _rl_vi_last_key_before_insert = key; - if (_rl_show_mode_in_prompt) - _rl_reset_prompt (); - return (0); -} - -int -rl_vi_insert_mode (int count, int key) -{ - rl_vi_start_inserting (key, 1, rl_arg_sign); - return (0); -} - -static void -vi_save_insert_buffer (int start, int len) -{ - /* Same code as _rl_vi_save_insert below */ - if (len >= vi_insert_buffer_size) - { - vi_insert_buffer_size += (len + 32) - (len % 32); - vi_insert_buffer = (char *)xrealloc (vi_insert_buffer, vi_insert_buffer_size); - } - strncpy (vi_insert_buffer, rl_line_buffer + start, len - 1); - vi_insert_buffer[len-1] = '\0'; -} - -static void -_rl_vi_save_replace (void) -{ - int len, start, end; - UNDO_LIST *up; - - up = rl_undo_list; - if (up == 0 || up->what != UNDO_END || vi_replace_count <= 0) - { - if (vi_insert_buffer_size >= 1) - vi_insert_buffer[0] = '\0'; - return; - } - /* Let's try it the quick and easy way for now. This should essentially - accommodate every UNDO_INSERT and save the inserted text to - vi_insert_buffer */ - end = rl_point; - start = end - vi_replace_count + 1; - len = vi_replace_count + 1; - - vi_save_insert_buffer (start, len); -} - -static void -_rl_vi_save_insert (UNDO_LIST *up) -{ - int len, start, end; - - if (up == 0 || up->what != UNDO_INSERT) - { - if (vi_insert_buffer_size >= 1) - vi_insert_buffer[0] = '\0'; - return; - } - - start = up->start; - end = up->end; - len = end - start + 1; - - vi_save_insert_buffer (start, len); -} - -void -_rl_vi_done_inserting (void) -{ - if (_rl_vi_doing_insert) - { - /* The `C', `s', and `S' commands set this. */ - rl_end_undo_group (); - /* Now, the text between rl_undo_list->next->start and - rl_undo_list->next->end is what was inserted while in insert - mode. It gets copied to VI_INSERT_BUFFER because it depends - on absolute indices into the line which may change (though they - probably will not). */ - _rl_vi_doing_insert = 0; - if (_rl_vi_last_key_before_insert == 'R') - _rl_vi_save_replace (); /* Half the battle */ - else - _rl_vi_save_insert (rl_undo_list->next); - vi_continued_command = 1; - } - else - { - if (rl_undo_list && (_rl_vi_last_key_before_insert == 'i' || - _rl_vi_last_key_before_insert == 'a' || - _rl_vi_last_key_before_insert == 'I' || - _rl_vi_last_key_before_insert == 'A')) - _rl_vi_save_insert (rl_undo_list); - /* XXX - Other keys probably need to be checked. */ - else if (_rl_vi_last_key_before_insert == 'C') - rl_end_undo_group (); - while (_rl_undo_group_level > 0) - rl_end_undo_group (); - vi_continued_command = 0; - } -} - -int -rl_vi_movement_mode (int count, int key) -{ - if (rl_point > 0) - rl_backward_char (1, key); - - _rl_keymap = vi_movement_keymap; - _rl_vi_done_inserting (); - - /* This is how POSIX.2 says `U' should behave -- everything up until the - first time you go into command mode should not be undone. */ - if (RL_ISSTATE (RL_STATE_VICMDONCE) == 0) - rl_free_undo_list (); - - if (_rl_show_mode_in_prompt) - _rl_reset_prompt (); - - RL_SETSTATE (RL_STATE_VICMDONCE); - return (0); -} - -int -rl_vi_arg_digit (int count, int c) -{ - if (c == '0' && rl_numeric_arg == 1 && !rl_explicit_arg) - return (rl_beg_of_line (1, c)); - else - return (rl_digit_argument (count, c)); -} - -/* Change the case of the next COUNT characters. */ -#if defined (HANDLE_MULTIBYTE) -static int -_rl_vi_change_mbchar_case (int count) -{ - wchar_t wc; - char mb[MB_LEN_MAX+1]; - int mlen, p; - size_t m; - mbstate_t ps; - - memset (&ps, 0, sizeof (mbstate_t)); - if (_rl_adjust_point (rl_line_buffer, rl_point, &ps) > 0) - count--; - while (count-- && rl_point < rl_end) - { - m = mbrtowc (&wc, rl_line_buffer + rl_point, rl_end - rl_point, &ps); - if (MB_INVALIDCH (m)) - wc = (wchar_t)rl_line_buffer[rl_point]; - else if (MB_NULLWCH (m)) - wc = L'\0'; - if (iswupper (wc)) - wc = towlower (wc); - else if (iswlower (wc)) - wc = towupper (wc); - else - { - /* Just skip over chars neither upper nor lower case */ - rl_forward_char (1, 0); - continue; - } - - /* Vi is kind of strange here. */ - if (wc) - { - p = rl_point; - mlen = wcrtomb (mb, wc, &ps); - if (mlen >= 0) - mb[mlen] = '\0'; - rl_begin_undo_group (); - rl_vi_delete (1, 0); - if (rl_point < p) /* Did we retreat at EOL? */ - _rl_vi_advance_point (); - rl_insert_text (mb); - rl_end_undo_group (); - rl_vi_check (); - } - else - rl_forward_char (1, 0); - } - - return 0; -} -#endif - -int -rl_vi_change_case (int count, int ignore) -{ - int c, p; - - /* Don't try this on an empty line. */ - if (rl_point >= rl_end) - return (0); - - c = 0; -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - return (_rl_vi_change_mbchar_case (count)); -#endif - - while (count-- && rl_point < rl_end) - { - if (_rl_uppercase_p (rl_line_buffer[rl_point])) - c = _rl_to_lower (rl_line_buffer[rl_point]); - else if (_rl_lowercase_p (rl_line_buffer[rl_point])) - c = _rl_to_upper (rl_line_buffer[rl_point]); - else - { - /* Just skip over characters neither upper nor lower case. */ - rl_forward_char (1, c); - continue; - } - - /* Vi is kind of strange here. */ - if (c) - { - p = rl_point; - rl_begin_undo_group (); - rl_vi_delete (1, c); - if (rl_point < p) /* Did we retreat at EOL? */ - rl_point++; - _rl_insert_char (1, c); - rl_end_undo_group (); - rl_vi_check (); - } - else - rl_forward_char (1, c); - } - return (0); -} - -int -rl_vi_put (int count, int key) -{ - if (!_rl_uppercase_p (key) && (rl_point + 1 <= rl_end)) - rl_point = _rl_find_next_mbchar (rl_line_buffer, rl_point, 1, MB_FIND_NONZERO); - - while (count--) - rl_yank (1, key); - - rl_backward_char (1, key); - return (0); -} - -/* Move the cursor back one character if you're at the end of the line */ -int -rl_vi_check (void) -{ - if (rl_point && rl_point == rl_end) - _rl_vi_backup (); - return (0); -} - -/* Move to the character position specified by COUNT */ -int -rl_vi_column (int count, int key) -{ - if (count > rl_end) - rl_end_of_line (1, key); - else - { - rl_point = 0; - rl_point = _rl_forward_char_internal (count - 1); - } - return (0); -} - -/* Process C as part of the current numeric argument. Return -1 if the - argument should be aborted, 0 if we should not read any more chars, and - 1 if we should continue to read chars. */ -static int -_rl_vi_arg_dispatch (int c) -{ - int key; - - key = c; - if (c >= 0 && _rl_keymap[c].type == ISFUNC && _rl_keymap[c].function == rl_universal_argument) - { - rl_numeric_arg *= 4; - return 1; - } - - c = UNMETA (c); - - if (_rl_digit_p (c)) - { - if (rl_explicit_arg) - rl_numeric_arg = (rl_numeric_arg * 10) + _rl_digit_value (c); - else - rl_numeric_arg = _rl_digit_value (c); - rl_explicit_arg = 1; - return 1; /* keep going */ - } - else - { - rl_clear_message (); - rl_stuff_char (key); - return 0; /* done */ - } -} - -/* A simplified loop for vi. Don't dispatch key at end. - Don't recognize minus sign? - Should this do rl_save_prompt/rl_restore_prompt? */ -static int -rl_digit_loop1 (void) -{ - int c, r; - - while (1) - { - if (_rl_arg_overflow ()) - return 1; - - c = _rl_arg_getchar (); - - r = _rl_vi_arg_dispatch (c); - if (r <= 0) - break; - } - - RL_UNSETSTATE(RL_STATE_NUMERICARG); - return (0); -} - -/* This set of functions is basically to handle the commands that take a - motion argument while in callback mode: read the command, read the motion - command modifier, find the extent of the text to affect, and dispatch the - command for execution. */ -static void -_rl_mvcxt_init (_rl_vimotion_cxt *m, int op, int key) -{ - m->op = op; - m->state = m->flags = 0; - m->ncxt = 0; - m->numeric_arg = -1; - m->start = rl_point; - m->end = rl_end; - m->key = key; - m->motion = -1; -} - -static _rl_vimotion_cxt * -_rl_mvcxt_alloc (int op, int key) -{ - _rl_vimotion_cxt *m; - - m = xmalloc (sizeof (_rl_vimotion_cxt)); - _rl_mvcxt_init (m, op, key); - return m; -} - -static void -_rl_mvcxt_dispose (_rl_vimotion_cxt *m) -{ - xfree (m); -} - -static int -rl_domove_motion_callback (_rl_vimotion_cxt *m) -{ - int c; - - _rl_vi_last_motion = c = m->motion; - - /* Append a blank character temporarily so that the motion routines - work right at the end of the line. Original value of rl_end is saved - as m->end. */ - rl_line_buffer[rl_end++] = ' '; - rl_line_buffer[rl_end] = '\0'; - - _rl_dispatch (c, _rl_keymap); - -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - /* Messy case where char search can be vi motion command; see rest of - details in callback.c. vi_char_search and callback_char_search just - set and unset the CHARSEARCH state. This is where any vi motion - command that needs to set its own state should be handled, with any - corresponding code to manage that state in callback.c */ - if (RL_ISSTATE (RL_STATE_CHARSEARCH)) - return 0; - else - return (_rl_vi_domove_motion_cleanup (c, m)); - } -#endif - - return (_rl_vi_domove_motion_cleanup (c, m)); -} - -int -_rl_vi_domove_motion_cleanup (int c, _rl_vimotion_cxt *m) -{ - int r; - - /* Remove the blank that we added in rl_domove_motion_callback. */ - rl_end = m->end; - rl_line_buffer[rl_end] = '\0'; - if (rl_point > rl_end) - rl_point = rl_end; - - /* No change in position means the command failed. */ - if (rl_mark == rl_point) - { - RL_UNSETSTATE (RL_STATE_VIMOTION); - return (-1); - } - - /* rl_vi_f[wW]ord () leaves the cursor on the first character of the next - word. If we are not at the end of the line, and we are on a - non-whitespace character, move back one (presumably to whitespace). */ - if ((_rl_to_upper (c) == 'W') && rl_point < rl_end && rl_point > rl_mark && - !whitespace (rl_line_buffer[rl_point])) - rl_point--; /* XXX */ - - /* If cw or cW, back up to the end of a word, so the behaviour of ce - or cE is the actual result. Brute-force, no subtlety. */ - if (m->key == 'c' && rl_point >= rl_mark && (_rl_to_upper (c) == 'W')) - { - /* Don't move farther back than where we started. */ - while (rl_point > rl_mark && whitespace (rl_line_buffer[rl_point])) - rl_point--; - - /* Posix.2 says that if cw or cW moves the cursor towards the end of - the line, the character under the cursor should be deleted. */ - if (rl_point == rl_mark) - _rl_vi_advance_point (); - else - { - /* Move past the end of the word so that the kill doesn't - remove the last letter of the previous word. Only do this - if we are not at the end of the line. */ - if (rl_point >= 0 && rl_point < (rl_end - 1) && !whitespace (rl_line_buffer[rl_point])) - _rl_vi_advance_point (); - } - } - - if (rl_mark < rl_point) - SWAP (rl_point, rl_mark); - -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - (*rl_redisplay_function)(); /* make sure motion is displayed */ -#endif - - r = vidomove_dispatch (m); - - return (r); -} - -#define RL_VIMOVENUMARG() (RL_ISSTATE (RL_STATE_VIMOTION) && RL_ISSTATE (RL_STATE_NUMERICARG)) - -static int -rl_domove_read_callback (_rl_vimotion_cxt *m) -{ - int c, save; - - c = m->motion; - - if (member (c, vi_motion)) - { -#if defined (READLINE_CALLBACKS) - /* If we just read a vi-mode motion command numeric argument, turn off - the `reading numeric arg' state */ - if (RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG()) - RL_UNSETSTATE (RL_STATE_NUMERICARG); -#endif - /* Should do everything, including turning off RL_STATE_VIMOTION */ - return (rl_domove_motion_callback (m)); - } - else if (m->key == c && (m->key == 'd' || m->key == 'y' || m->key == 'c')) - { - rl_mark = rl_end; - rl_beg_of_line (1, c); - _rl_vi_last_motion = c; - RL_UNSETSTATE (RL_STATE_VIMOTION); - return (vidomove_dispatch (m)); - } -#if defined (READLINE_CALLBACKS) - /* XXX - these need to handle rl_universal_argument bindings */ - /* Reading vi motion char continuing numeric argument */ - else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_VIMOVENUMARG()) - { - return (_rl_vi_arg_dispatch (c)); - } - /* Readine vi motion char starting numeric argument */ - else if (_rl_digit_p (c) && RL_ISSTATE (RL_STATE_CALLBACK) && RL_ISSTATE (RL_STATE_VIMOTION) && (RL_ISSTATE (RL_STATE_NUMERICARG) == 0)) - { - RL_SETSTATE (RL_STATE_NUMERICARG); - return (_rl_vi_arg_dispatch (c)); - } -#endif - else if (_rl_digit_p (c)) - { - /* This code path taken when not in callback mode */ - save = rl_numeric_arg; - rl_numeric_arg = _rl_digit_value (c); - rl_explicit_arg = 1; - RL_SETSTATE (RL_STATE_NUMERICARG); - rl_digit_loop1 (); - rl_numeric_arg *= save; - c = rl_vi_domove_getchar (m); - if (c < 0) - { - m->motion = 0; - return -1; - } - m->motion = c; - return (rl_domove_motion_callback (m)); - } - else - { - RL_UNSETSTATE (RL_STATE_VIMOTION); - RL_UNSETSTATE (RL_STATE_NUMERICARG); - return (1); - } -} - -static int -rl_vi_domove_getchar (_rl_vimotion_cxt *m) -{ - int c; - - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - return c; -} - -#if defined (READLINE_CALLBACKS) -int -_rl_vi_domove_callback (_rl_vimotion_cxt *m) -{ - int c, r; - - m->motion = c = rl_vi_domove_getchar (m); - if (c < 0) - return 1; /* EOF */ - r = rl_domove_read_callback (m); - - return ((r == 0) ? r : 1); /* normalize return values */ -} -#endif - -/* This code path is taken when not in callback mode. */ -int -rl_vi_domove (int x, int *ignore) -{ - int r; - _rl_vimotion_cxt *m; - - m = _rl_vimvcxt; - *ignore = m->motion = rl_vi_domove_getchar (m); - - if (m->motion < 0) - { - m->motion = 0; - return -1; - } - - return (rl_domove_read_callback (m)); -} - -static int -vi_delete_dispatch (_rl_vimotion_cxt *m) -{ - /* These are the motion commands that do not require adjusting the - mark. */ - if (((strchr (" l|h^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) && - (rl_mark < rl_end)) - INCREMENT_POS (rl_mark); - - rl_kill_text (rl_point, rl_mark); - return (0); -} - -int -rl_vi_delete_to (int count, int key) -{ - int c, r; - - _rl_vimvcxt = _rl_mvcxt_alloc (VIM_DELETE, key); - _rl_vimvcxt->start = rl_point; - - rl_mark = rl_point; - if (_rl_uppercase_p (key)) - { - _rl_vimvcxt->motion = '$'; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing && _rl_vi_last_motion != 'd') /* `dd' is special */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing) /* handle redoing `dd' here */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - rl_mark = rl_end; - rl_beg_of_line (1, key); - RL_UNSETSTATE (RL_STATE_VIMOTION); - r = vidomove_dispatch (_rl_vimvcxt); - } -#if defined (READLINE_CALLBACKS) - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - RL_SETSTATE (RL_STATE_VIMOTION); - return (0); - } -#endif - else - r = rl_vi_domove (key, &c); - - if (r < 0) - { - rl_ding (); - r = -1; - } - - _rl_mvcxt_dispose (_rl_vimvcxt); - _rl_vimvcxt = 0; - - return r; -} - -static int -vi_change_dispatch (_rl_vimotion_cxt *m) -{ - /* These are the motion commands that do not require adjusting the - mark. c[wW] are handled by special-case code in rl_vi_domove(), - and already leave the mark at the correct location. */ - if (((strchr (" l|hwW^0bBFT`", m->motion) == 0) && (rl_point >= m->start)) && - (rl_mark < rl_end)) - INCREMENT_POS (rl_mark); - - /* The cursor never moves with c[wW]. */ - if ((_rl_to_upper (m->motion) == 'W') && rl_point < m->start) - rl_point = m->start; - - if (_rl_vi_redoing) - { - if (vi_insert_buffer && *vi_insert_buffer) - rl_begin_undo_group (); - rl_delete_text (rl_point, rl_mark); - if (vi_insert_buffer && *vi_insert_buffer) - { - rl_insert_text (vi_insert_buffer); - rl_end_undo_group (); - } - } - else - { - rl_begin_undo_group (); /* to make the `u' command work */ - rl_kill_text (rl_point, rl_mark); - /* `C' does not save the text inserted for undoing or redoing. */ - if (_rl_uppercase_p (m->key) == 0) - _rl_vi_doing_insert = 1; - /* XXX -- TODO -- use m->numericarg? */ - rl_vi_start_inserting (m->key, rl_numeric_arg, rl_arg_sign); - } - - return (0); -} - -int -rl_vi_change_to (int count, int key) -{ - int c, r; - - _rl_vimvcxt = _rl_mvcxt_alloc (VIM_CHANGE, key); - _rl_vimvcxt->start = rl_point; - - rl_mark = rl_point; - if (_rl_uppercase_p (key)) - { - _rl_vimvcxt->motion = '$'; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing && _rl_vi_last_motion != 'c') /* `cc' is special */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing) /* handle redoing `cc' here */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - rl_mark = rl_end; - rl_beg_of_line (1, key); - RL_UNSETSTATE (RL_STATE_VIMOTION); - r = vidomove_dispatch (_rl_vimvcxt); - } -#if defined (READLINE_CALLBACKS) - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - RL_SETSTATE (RL_STATE_VIMOTION); - return (0); - } -#endif - else - r = rl_vi_domove (key, &c); - - if (r < 0) - { - rl_ding (); - r = -1; /* normalize return value */ - } - - _rl_mvcxt_dispose (_rl_vimvcxt); - _rl_vimvcxt = 0; - - return r; -} - -static int -vi_yank_dispatch (_rl_vimotion_cxt *m) -{ - /* These are the motion commands that do not require adjusting the - mark. */ - if (((strchr (" l|h^0%bBFT`", m->motion) == 0) && (rl_point >= m->start)) && - (rl_mark < rl_end)) - INCREMENT_POS (rl_mark); - - rl_begin_undo_group (); - rl_kill_text (rl_point, rl_mark); - rl_end_undo_group (); - rl_do_undo (); - rl_point = m->start; - - return (0); -} - -int -rl_vi_yank_to (int count, int key) -{ - int c, r; - - _rl_vimvcxt = _rl_mvcxt_alloc (VIM_YANK, key); - _rl_vimvcxt->start = rl_point; - - rl_mark = rl_point; - if (_rl_uppercase_p (key)) - { - _rl_vimvcxt->motion = '$'; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing && _rl_vi_last_motion != 'y') /* `yy' is special */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - r = rl_domove_motion_callback (_rl_vimvcxt); - } - else if (_rl_vi_redoing) /* handle redoing `yy' here */ - { - _rl_vimvcxt->motion = _rl_vi_last_motion; - rl_mark = rl_end; - rl_beg_of_line (1, key); - RL_UNSETSTATE (RL_STATE_VIMOTION); - r = vidomove_dispatch (_rl_vimvcxt); - } -#if defined (READLINE_CALLBACKS) - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - RL_SETSTATE (RL_STATE_VIMOTION); - return (0); - } -#endif - else - r = rl_vi_domove (key, &c); - - if (r < 0) - { - rl_ding (); - r = -1; - } - - _rl_mvcxt_dispose (_rl_vimvcxt); - _rl_vimvcxt = 0; - - return r; -} - -static int -vidomove_dispatch (_rl_vimotion_cxt *m) -{ - int r; - - switch (m->op) - { - case VIM_DELETE: - r = vi_delete_dispatch (m); - break; - case VIM_CHANGE: - r = vi_change_dispatch (m); - break; - case VIM_YANK: - r = vi_yank_dispatch (m); - break; - default: - _rl_errmsg ("vidomove_dispatch: unknown operator %d", m->op); - r = 1; - break; - } - - RL_UNSETSTATE (RL_STATE_VIMOTION); - return r; -} - -int -rl_vi_rubout (int count, int key) -{ - int opoint; - - if (count < 0) - return (rl_vi_delete (-count, key)); - - if (rl_point == 0) - { - rl_ding (); - return 1; - } - - opoint = rl_point; - if (count > 1 && MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_backward_char (count, key); - else if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_point = _rl_find_prev_mbchar (rl_line_buffer, rl_point, MB_FIND_NONZERO); - else - rl_point -= count; - - if (rl_point < 0) - rl_point = 0; - - rl_kill_text (rl_point, opoint); - - return (0); -} - -int -rl_vi_delete (int count, int key) -{ - int end; - - if (count < 0) - return (rl_vi_rubout (-count, key)); - - if (rl_end == 0) - { - rl_ding (); - return 1; - } - - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - end = _rl_find_next_mbchar (rl_line_buffer, rl_point, count, MB_FIND_NONZERO); - else - end = rl_point + count; - - if (end >= rl_end) - end = rl_end; - - rl_kill_text (rl_point, end); - - if (rl_point > 0 && rl_point == rl_end) - rl_backward_char (1, key); - - return (0); -} - -/* This does what Posix specifies vi-mode C-w to do: using whitespace and - punctuation characters as the word boundaries. */ - -#define vi_unix_word_boundary(c) (whitespace(c) || ispunct(c)) - -int -rl_vi_unix_word_rubout (int count, int key) -{ - int orig_point; - - if (rl_point == 0) - rl_ding (); - else - { - orig_point = rl_point; - if (count <= 0) - count = 1; - - while (count--) - { - /* This isn't quite what ksh93 does but it seems to match what the - Posix description of sh specifies, with a few accommodations - for sequences of whitespace characters between words and at - the end of the line. */ - - /* Skip over whitespace at the end of the line as a special case */ - if (rl_point > 0 && (rl_line_buffer[rl_point] == 0) && - whitespace (rl_line_buffer[rl_point - 1])) - while (--rl_point > 0 && whitespace (rl_line_buffer[rl_point])) - ; - - /* If we're at the start of a word, move back to word boundary so we - move back to the `preceding' word */ - if (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0) && - vi_unix_word_boundary (rl_line_buffer[rl_point - 1])) - rl_point--; - - /* If we are at a word boundary (whitespace/punct), move backward - past a sequence of word boundary characters. If we are at the - end of a word (non-word boundary), move back to a word boundary */ - if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point])) - while (rl_point && vi_unix_word_boundary (rl_line_buffer[rl_point - 1])) - rl_point--; - else if (rl_point > 0 && vi_unix_word_boundary (rl_line_buffer[rl_point]) == 0) - while (rl_point > 0 && (vi_unix_word_boundary (rl_line_buffer[rl_point - 1]) == 0)) - _rl_vi_backup_point (); - } - - rl_kill_text (orig_point, rl_point); - } - - return 0; -} - - -int -rl_vi_back_to_indent (int count, int key) -{ - rl_beg_of_line (1, key); - while (rl_point < rl_end && whitespace (rl_line_buffer[rl_point])) - rl_point++; - return (0); -} - -int -rl_vi_first_print (int count, int key) -{ - return (rl_vi_back_to_indent (1, key)); -} - -static int _rl_cs_dir, _rl_cs_orig_dir; - -#if defined (READLINE_CALLBACKS) -static int -_rl_vi_callback_char_search (_rl_callback_generic_arg *data) -{ - int c; -#if defined (HANDLE_MULTIBYTE) - c = _rl_vi_last_search_mblen = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX); -#else - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); -#endif - - if (c <= 0) - { - RL_UNSETSTATE (RL_STATE_CHARSEARCH); - return -1; - } - -#if !defined (HANDLE_MULTIBYTE) - _rl_vi_last_search_char = c; -#endif - - _rl_callback_func = 0; - _rl_want_redisplay = 1; - RL_UNSETSTATE (RL_STATE_CHARSEARCH); - -#if defined (HANDLE_MULTIBYTE) - return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_mbchar, _rl_vi_last_search_mblen)); -#else - return (_rl_char_search_internal (data->count, _rl_cs_dir, _rl_vi_last_search_char)); -#endif -} -#endif - -int -rl_vi_char_search (int count, int key) -{ - int c; -#if defined (HANDLE_MULTIBYTE) - static char *target; - static int tlen; -#else - static char target; -#endif - - if (key == ';' || key == ',') - { - if (_rl_cs_orig_dir == 0) - return 1; -#if defined (HANDLE_MULTIBYTE) - if (_rl_vi_last_search_mblen == 0) - return 1; -#else - if (_rl_vi_last_search_char == 0) - return 1; -#endif - _rl_cs_dir = (key == ';') ? _rl_cs_orig_dir : -_rl_cs_orig_dir; - } - else - { - switch (key) - { - case 't': - _rl_cs_orig_dir = _rl_cs_dir = FTO; - break; - - case 'T': - _rl_cs_orig_dir = _rl_cs_dir = BTO; - break; - - case 'f': - _rl_cs_orig_dir = _rl_cs_dir = FFIND; - break; - - case 'F': - _rl_cs_orig_dir = _rl_cs_dir = BFIND; - break; - } - - if (_rl_vi_redoing) - { - /* set target and tlen below */ - } -#if defined (READLINE_CALLBACKS) - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = _rl_callback_data_alloc (count); - _rl_callback_data->i1 = _rl_cs_dir; - _rl_callback_data->i2 = key; - _rl_callback_func = _rl_vi_callback_char_search; - RL_SETSTATE (RL_STATE_CHARSEARCH); - return (0); - } -#endif - else - { -#if defined (HANDLE_MULTIBYTE) - c = _rl_read_mbchar (_rl_vi_last_search_mbchar, MB_LEN_MAX); - if (c <= 0) - return -1; - _rl_vi_last_search_mblen = c; -#else - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - if (c < 0) - return -1; - _rl_vi_last_search_char = c; -#endif - } - } - -#if defined (HANDLE_MULTIBYTE) - target = _rl_vi_last_search_mbchar; - tlen = _rl_vi_last_search_mblen; -#else - target = _rl_vi_last_search_char; -#endif - -#if defined (HANDLE_MULTIBYTE) - return (_rl_char_search_internal (count, _rl_cs_dir, target, tlen)); -#else - return (_rl_char_search_internal (count, _rl_cs_dir, target)); -#endif -} - -/* Match brackets */ -int -rl_vi_match (int ignore, int key) -{ - int count = 1, brack, pos, tmp, pre; - - pos = rl_point; - if ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0) - { - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - { - while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0) - { - pre = rl_point; - rl_forward_char (1, key); - if (pre == rl_point) - break; - } - } - else - while ((brack = rl_vi_bracktype (rl_line_buffer[rl_point])) == 0 && - rl_point < rl_end - 1) - rl_forward_char (1, key); - - if (brack <= 0) - { - rl_point = pos; - rl_ding (); - return 1; - } - } - - pos = rl_point; - - if (brack < 0) - { - while (count) - { - tmp = pos; - if (MB_CUR_MAX == 1 || rl_byte_oriented) - pos--; - else - { - pos = _rl_find_prev_mbchar (rl_line_buffer, pos, MB_FIND_ANY); - if (tmp == pos) - pos--; - } - if (pos >= 0) - { - int b = rl_vi_bracktype (rl_line_buffer[pos]); - if (b == -brack) - count--; - else if (b == brack) - count++; - } - else - { - rl_ding (); - return 1; - } - } - } - else - { /* brack > 0 */ - while (count) - { - if (MB_CUR_MAX == 1 || rl_byte_oriented) - pos++; - else - pos = _rl_find_next_mbchar (rl_line_buffer, pos, 1, MB_FIND_ANY); - - if (pos < rl_end) - { - int b = rl_vi_bracktype (rl_line_buffer[pos]); - if (b == -brack) - count--; - else if (b == brack) - count++; - } - else - { - rl_ding (); - return 1; - } - } - } - rl_point = pos; - return (0); -} - -int -rl_vi_bracktype (int c) -{ - switch (c) - { - case '(': return 1; - case ')': return -1; - case '[': return 2; - case ']': return -2; - case '{': return 3; - case '}': return -3; - default: return 0; - } -} - -static int -_rl_vi_change_char (int count, int c, char *mb) -{ - int p; - - if (c == '\033' || c == CTRL ('C')) - return -1; - - rl_begin_undo_group (); - while (count-- && rl_point < rl_end) - { - p = rl_point; - rl_vi_delete (1, c); - if (rl_point < p) /* Did we retreat at EOL? */ - _rl_vi_append_forward (c); -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - rl_insert_text (mb); - else -#endif - _rl_insert_char (1, c); - } - - /* The cursor shall be left on the last character changed. */ - rl_backward_char (1, c); - - rl_end_undo_group (); - - return (0); -} - -static int -_rl_vi_callback_getchar (char *mb, int mlen) -{ - int c; - - RL_SETSTATE(RL_STATE_MOREINPUT); - c = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (c < 0) - return -1; - -#if defined (HANDLE_MULTIBYTE) - if (MB_CUR_MAX > 1 && rl_byte_oriented == 0) - c = _rl_read_mbstring (c, mb, mlen); -#endif - - return c; -} - -#if defined (READLINE_CALLBACKS) -static int -_rl_vi_callback_change_char (_rl_callback_generic_arg *data) -{ - int c; - char mb[MB_LEN_MAX+1]; - - c = _rl_vi_callback_getchar (mb, MB_LEN_MAX); -#if defined (HANDLE_MULTIBYTE) - strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX); -#else - _rl_vi_last_replacement[0] = c; -#endif - _rl_vi_last_replacement[MB_LEN_MAX] = '\0'; /* XXX */ - - if (c < 0) - return -1; - - _rl_callback_func = 0; - _rl_want_redisplay = 1; - - return (_rl_vi_change_char (data->count, c, mb)); -} -#endif - -int -rl_vi_change_char (int count, int key) -{ - int c; - char mb[MB_LEN_MAX+1]; - - if (_rl_vi_redoing) - { - strncpy (mb, _rl_vi_last_replacement, MB_LEN_MAX); - c = (unsigned char)_rl_vi_last_replacement[0]; /* XXX */ - mb[MB_LEN_MAX] = '\0'; - } -#if defined (READLINE_CALLBACKS) - else if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = _rl_callback_data_alloc (count); - _rl_callback_func = _rl_vi_callback_change_char; - return (0); - } -#endif - else - { - c = _rl_vi_callback_getchar (mb, MB_LEN_MAX); -#ifdef HANDLE_MULTIBYTE - strncpy (_rl_vi_last_replacement, mb, MB_LEN_MAX); -#else - _rl_vi_last_replacement[0] = c; -#endif - _rl_vi_last_replacement[MB_LEN_MAX] = '\0'; /* just in case */ - } - - if (c < 0) - return -1; - - return (_rl_vi_change_char (count, c, mb)); -} - -int -rl_vi_subst (int count, int key) -{ - /* If we are redoing, rl_vi_change_to will stuff the last motion char */ - if (_rl_vi_redoing == 0) - rl_stuff_char ((key == 'S') ? 'c' : 'l'); /* `S' == `cc', `s' == `cl' */ - - return (rl_vi_change_to (count, 'c')); -} - -int -rl_vi_overstrike (int count, int key) -{ - if (_rl_vi_doing_insert == 0) - { - _rl_vi_doing_insert = 1; - rl_begin_undo_group (); - } - - if (count > 0) - { - _rl_overwrite_char (count, key); - vi_replace_count += count; - } - - return (0); -} - -int -rl_vi_overstrike_delete (int count, int key) -{ - int i, s; - - for (i = 0; i < count; i++) - { - if (vi_replace_count == 0) - { - rl_ding (); - break; - } - s = rl_point; - - if (rl_do_undo ()) - vi_replace_count--; - - if (rl_point == s) - rl_backward_char (1, key); - } - - if (vi_replace_count == 0 && _rl_vi_doing_insert) - { - rl_end_undo_group (); - rl_do_undo (); - _rl_vi_doing_insert = 0; - } - return (0); -} - -int -rl_vi_replace (int count, int key) -{ - int i; - - vi_replace_count = 0; - - if (vi_replace_map == 0) - { - vi_replace_map = rl_make_bare_keymap (); - - for (i = 0; i < ' '; i++) - if (vi_insertion_keymap[i].type == ISFUNC) - vi_replace_map[i].function = vi_insertion_keymap[i].function; - - for (i = ' '; i < KEYMAP_SIZE; i++) - vi_replace_map[i].function = rl_vi_overstrike; - - vi_replace_map[RUBOUT].function = rl_vi_overstrike_delete; - - /* Make sure these are what we want. */ - vi_replace_map[ESC].function = rl_vi_movement_mode; - vi_replace_map[RETURN].function = rl_newline; - vi_replace_map[NEWLINE].function = rl_newline; - - /* If the normal vi insertion keymap has ^H bound to erase, do the - same here. Probably should remove the assignment to RUBOUT up - there, but I don't think it will make a difference in real life. */ - if (vi_insertion_keymap[CTRL ('H')].type == ISFUNC && - vi_insertion_keymap[CTRL ('H')].function == rl_rubout) - vi_replace_map[CTRL ('H')].function = rl_vi_overstrike_delete; - - /* Make sure this is the value we need. */ - vi_replace_map[ANYOTHERKEY].type = ISFUNC; - vi_replace_map[ANYOTHERKEY].function = (rl_command_func_t *)NULL; - } - - rl_vi_start_inserting (key, 1, rl_arg_sign); - - _rl_vi_last_key_before_insert = key; - _rl_keymap = vi_replace_map; - - return (0); -} - -#if 0 -/* Try to complete the word we are standing on or the word that ends with - the previous character. A space matches everything. Word delimiters are - space and ;. */ -int -rl_vi_possible_completions (void) -{ - int save_pos = rl_point; - - if (rl_line_buffer[rl_point] != ' ' && rl_line_buffer[rl_point] != ';') - { - while (rl_point < rl_end && rl_line_buffer[rl_point] != ' ' && - rl_line_buffer[rl_point] != ';') - _rl_vi_advance_point (); - } - else if (rl_line_buffer[rl_point - 1] == ';') - { - rl_ding (); - return (0); - } - - rl_possible_completions (); - rl_point = save_pos; - - return (0); -} -#endif - -/* Functions to save and restore marks. */ -static int -_rl_vi_set_mark (void) -{ - int ch; - - RL_SETSTATE(RL_STATE_MOREINPUT); - ch = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (ch < 0 || ch < 'a' || ch > 'z') /* make test against 0 explicit */ - { - rl_ding (); - return 1; - } - ch -= 'a'; - vi_mark_chars[ch] = rl_point; - return 0; -} - -#if defined (READLINE_CALLBACKS) -static int -_rl_vi_callback_set_mark (_rl_callback_generic_arg *data) -{ - _rl_callback_func = 0; - _rl_want_redisplay = 1; - - return (_rl_vi_set_mark ()); -} -#endif - -int -rl_vi_set_mark (int count, int key) -{ -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = 0; - _rl_callback_func = _rl_vi_callback_set_mark; - return (0); - } -#endif - - return (_rl_vi_set_mark ()); -} - -static int -_rl_vi_goto_mark (void) -{ - int ch; - - RL_SETSTATE(RL_STATE_MOREINPUT); - ch = rl_read_key (); - RL_UNSETSTATE(RL_STATE_MOREINPUT); - - if (ch == '`') - { - rl_point = rl_mark; - return 0; - } - else if (ch < 0 || ch < 'a' || ch > 'z') /* make test against 0 explicit */ - { - rl_ding (); - return 1; - } - - ch -= 'a'; - if (vi_mark_chars[ch] == -1) - { - rl_ding (); - return 1; - } - rl_point = vi_mark_chars[ch]; - return 0; -} - -#if defined (READLINE_CALLBACKS) -static int -_rl_vi_callback_goto_mark (_rl_callback_generic_arg *data) -{ - _rl_callback_func = 0; - _rl_want_redisplay = 1; - - return (_rl_vi_goto_mark ()); -} -#endif - -int -rl_vi_goto_mark (int count, int key) -{ -#if defined (READLINE_CALLBACKS) - if (RL_ISSTATE (RL_STATE_CALLBACK)) - { - _rl_callback_data = 0; - _rl_callback_func = _rl_vi_callback_goto_mark; - return (0); - } -#endif - - return (_rl_vi_goto_mark ()); -} -#endif /* VI_MODE */ diff --git a/readline/xfree.c b/readline/xfree.c deleted file mode 100644 index c199b29bdf..0000000000 --- a/readline/xfree.c +++ /dev/null @@ -1,49 +0,0 @@ -/* xfree.c -- safe version of free that ignores attempts to free NUL */ - -/* Copyright (C) 1991-2010,2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -#include -#endif - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include "xmalloc.h" - -/* **************************************************************** */ -/* */ -/* Memory Deallocation. */ -/* */ -/* **************************************************************** */ - -/* Use this as the function to call when adding unwind protects so we - don't need to know what free() returns. */ -void -xfree (PTR_T string) -{ - if (string) - free (string); -} diff --git a/readline/xmalloc.c b/readline/xmalloc.c deleted file mode 100644 index 5d01d75eae..0000000000 --- a/readline/xmalloc.c +++ /dev/null @@ -1,75 +0,0 @@ -/* xmalloc.c -- safe versions of malloc and realloc */ - -/* Copyright (C) 1991-2017 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#define READLINE_LIBRARY - -#if defined (HAVE_CONFIG_H) -#include -#endif - -#include - -#if defined (HAVE_STDLIB_H) -# include -#else -# include "ansi_stdlib.h" -#endif /* HAVE_STDLIB_H */ - -#include "xmalloc.h" - -/* **************************************************************** */ -/* */ -/* Memory Allocation and Deallocation. */ -/* */ -/* **************************************************************** */ - -static void -memory_error_and_abort (char *fname) -{ - fprintf (stderr, "%s: out of virtual memory\n", fname); - exit (2); -} - -/* Return a pointer to free()able block of memory large enough - to hold BYTES number of bytes. If the memory cannot be allocated, - print an error message and abort. */ -PTR_T -xmalloc (size_t bytes) -{ - PTR_T temp; - - temp = malloc (bytes); - if (temp == 0) - memory_error_and_abort ("xmalloc"); - return (temp); -} - -PTR_T -xrealloc (PTR_T pointer, size_t bytes) -{ - PTR_T temp; - - temp = pointer ? realloc (pointer, bytes) : malloc (bytes); - - if (temp == 0) - memory_error_and_abort ("xrealloc"); - return (temp); -} diff --git a/readline/xmalloc.h b/readline/xmalloc.h deleted file mode 100644 index f40d7a596a..0000000000 --- a/readline/xmalloc.h +++ /dev/null @@ -1,45 +0,0 @@ -/* xmalloc.h -- memory allocation that aborts on errors. */ - -/* Copyright (C) 1999-2009 Free Software Foundation, Inc. - - This file is part of the GNU Readline Library (Readline), a library - for reading lines of text with interactive input and history editing. - - Readline is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - Readline is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with Readline. If not, see . -*/ - -#if !defined (_XMALLOC_H_) -#define _XMALLOC_H_ - -#if defined (READLINE_LIBRARY) -# include "rlstdc.h" -#else -# include -#endif - -#ifndef PTR_T - -#ifdef __STDC__ -# define PTR_T void * -#else -# define PTR_T char * -#endif - -#endif /* !PTR_T */ - -extern PTR_T xmalloc PARAMS((size_t)); -extern PTR_T xrealloc PARAMS((void *, size_t)); -extern void xfree PARAMS((void *)); - -#endif /* _XMALLOC_H_ */
    ' . + &t2h_anchor('', $href, $entry) . + '  ' . + $descr . + "
    ' . + $entry . + '' . $descr . + "