From: Patrice Chotard Date: Wed, 10 Aug 2016 07:39:14 +0000 (+0200) Subject: mfd: Add STMPE1600 support X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=6bb9f0d93399cbde14fc6a1532341a14a85d2df4;p=deliverable%2Flinux.git mfd: Add STMPE1600 support STMPE1600 is a 16-bit port expander. Datasheet is available here : http://www2.st.com/content/st_com/en/products/interfaces-and-transceivers/ i-o-expanders-and-level-translators/i-o-expanders/stmpe1600.html Signed-off-by: Amelie DELAUNAY Signed-off-by: Patrice Chotard Acked-by: Linus Walleij Signed-off-by: Lee Jones --- diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c index c3f4aab53b07..863c39a3353c 100644 --- a/drivers/mfd/stmpe-i2c.c +++ b/drivers/mfd/stmpe-i2c.c @@ -57,6 +57,7 @@ static const struct of_device_id stmpe_of_match[] = { { .compatible = "st,stmpe610", .data = (void *)STMPE610, }, { .compatible = "st,stmpe801", .data = (void *)STMPE801, }, { .compatible = "st,stmpe811", .data = (void *)STMPE811, }, + { .compatible = "st,stmpe1600", .data = (void *)STMPE1600, }, { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, }, { .compatible = "st,stmpe1801", .data = (void *)STMPE1801, }, { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, }, @@ -101,6 +102,7 @@ static const struct i2c_device_id stmpe_i2c_id[] = { { "stmpe610", STMPE610 }, { "stmpe801", STMPE801 }, { "stmpe811", STMPE811 }, + { "stmpe1600", STMPE1600 }, { "stmpe1601", STMPE1601 }, { "stmpe1801", STMPE1801 }, { "stmpe2401", STMPE2401 }, diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 1877d1ea2e7c..cfdae8a3d779 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -552,6 +552,59 @@ static struct stmpe_variant_info stmpe610 = { .get_altfunc = stmpe811_get_altfunc, }; +/* + * STMPE1600 + * Compared to all others STMPE variant, LSB and MSB regs are located in this + * order : LSB addr + * MSB addr + 1 + * As there is only 2 * 8bits registers for GPMR/GPSR/IEGPIOPR, CSB index is MSB registers + */ + +static const u8 stmpe1600_regs[] = { + [STMPE_IDX_CHIP_ID] = STMPE1600_REG_CHIP_ID, + [STMPE_IDX_SYS_CTRL] = STMPE1600_REG_SYS_CTRL, + [STMPE_IDX_ICR_LSB] = STMPE1600_REG_SYS_CTRL, + [STMPE_IDX_GPMR_LSB] = STMPE1600_REG_GPMR_LSB, + [STMPE_IDX_GPMR_CSB] = STMPE1600_REG_GPMR_MSB, + [STMPE_IDX_GPSR_LSB] = STMPE1600_REG_GPSR_LSB, + [STMPE_IDX_GPSR_CSB] = STMPE1600_REG_GPSR_MSB, + [STMPE_IDX_GPDR_LSB] = STMPE1600_REG_GPDR_LSB, + [STMPE_IDX_GPDR_CSB] = STMPE1600_REG_GPDR_MSB, + [STMPE_IDX_IEGPIOR_LSB] = STMPE1600_REG_IEGPIOR_LSB, + [STMPE_IDX_IEGPIOR_CSB] = STMPE1600_REG_IEGPIOR_MSB, + [STMPE_IDX_ISGPIOR_LSB] = STMPE1600_REG_ISGPIOR_LSB, +}; + +static struct stmpe_variant_block stmpe1600_blocks[] = { + { + .cell = &stmpe_gpio_cell, + .irq = 0, + .block = STMPE_BLOCK_GPIO, + }, +}; + +static int stmpe1600_enable(struct stmpe *stmpe, unsigned int blocks, + bool enable) +{ + if (blocks & STMPE_BLOCK_GPIO) + return 0; + else + return -EINVAL; +} + +static struct stmpe_variant_info stmpe1600 = { + .name = "stmpe1600", + .id_val = STMPE1600_ID, + .id_mask = 0xffff, + .num_gpios = 16, + .af_bits = 0, + .regs = stmpe1600_regs, + .blocks = stmpe1600_blocks, + .num_blocks = ARRAY_SIZE(stmpe1600_blocks), + .num_irqs = STMPE1600_NR_INTERNAL_IRQS, + .enable = stmpe1600_enable, +}; + /* * STMPE1601 */ @@ -949,6 +1002,7 @@ static struct stmpe_variant_info *stmpe_variant_info[STMPE_NBR_PARTS] = { [STMPE610] = &stmpe610, [STMPE801] = &stmpe801, [STMPE811] = &stmpe811, + [STMPE1600] = &stmpe1600, [STMPE1601] = &stmpe1601, [STMPE1801] = &stmpe1801, [STMPE2401] = &stmpe2401, @@ -975,7 +1029,8 @@ static irqreturn_t stmpe_irq(int irq, void *data) int ret; int i; - if (variant->id_val == STMPE801_ID) { + if (variant->id_val == STMPE801_ID || + variant->id_val == STMPE1600_ID) { int base = irq_create_mapping(stmpe->domain, 0); handle_nested_irq(base); @@ -1149,13 +1204,13 @@ static int stmpe_chip_init(struct stmpe *stmpe) return ret; if (stmpe->irq >= 0) { - if (id == STMPE801_ID) + if (id == STMPE801_ID || id == STMPE1600_ID) icr = STMPE_SYS_CTRL_INT_EN; else icr = STMPE_ICR_LSB_GIM; - /* STMPE801 doesn't support Edge interrupts */ - if (id != STMPE801_ID) { + /* STMPE801 and STMPE1600 don't support Edge interrupts */ + if (id != STMPE801_ID && id != STMPE1600_ID) { if (irq_trigger == IRQF_TRIGGER_FALLING || irq_trigger == IRQF_TRIGGER_RISING) icr |= STMPE_ICR_LSB_EDGE; @@ -1163,7 +1218,7 @@ static int stmpe_chip_init(struct stmpe *stmpe) if (irq_trigger == IRQF_TRIGGER_RISING || irq_trigger == IRQF_TRIGGER_HIGH) { - if (id == STMPE801_ID) + if (id == STMPE801_ID || id == STMPE1600_ID) icr |= STMPE_SYS_CTRL_INT_HI; else icr |= STMPE_ICR_LSB_HIGH; diff --git a/drivers/mfd/stmpe.h b/drivers/mfd/stmpe.h index f1273420c8e8..f7efdd8a5fc6 100644 --- a/drivers/mfd/stmpe.h +++ b/drivers/mfd/stmpe.h @@ -163,6 +163,27 @@ int stmpe_remove(struct stmpe *stmpe); #define STMPE811_SYS_CTRL2_GPIO_OFF (1 << 2) #define STMPE811_SYS_CTRL2_TS_OFF (1 << 3) +/* + * STMPE1600 + */ +#define STMPE1600_ID 0x0016 +#define STMPE1600_NR_INTERNAL_IRQS 16 + +#define STMPE1600_REG_CHIP_ID 0x00 +#define STMPE1600_REG_SYS_CTRL 0x03 +#define STMPE1600_REG_IEGPIOR_LSB 0x08 +#define STMPE1600_REG_IEGPIOR_MSB 0x09 +#define STMPE1600_REG_ISGPIOR_LSB 0x0A +#define STMPE1600_REG_ISGPIOR_MSB 0x0B +#define STMPE1600_REG_GPMR_LSB 0x10 +#define STMPE1600_REG_GPMR_MSB 0x11 +#define STMPE1600_REG_GPSR_LSB 0x12 +#define STMPE1600_REG_GPSR_MSB 0x13 +#define STMPE1600_REG_GPDR_LSB 0x14 +#define STMPE1600_REG_GPDR_MSB 0x15 +#define STMPE1600_REG_GPPIR_LSB 0x16 +#define STMPE1600_REG_GPPIR_MSB 0x17 + /* * STMPE1601 */ diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index 6b26661a640e..4a827af17e59 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -26,6 +26,7 @@ enum stmpe_partnum { STMPE610, STMPE801, STMPE811, + STMPE1600, STMPE1601, STMPE1801, STMPE2401,