From: Ulf Hansson Date: Mon, 7 Jan 2013 14:30:44 +0000 (+0100) Subject: ARM: 7617/1: mmc: mmci: Support for DDR mode X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=6dbb6ee090e810be337945a7a64d647549b70328;p=deliverable%2Flinux.git ARM: 7617/1: mmc: mmci: Support for DDR mode Add support for DDR mode which may be used for the ux500v2 variant. Corresponding capabilities to enable the DDR support must be set in the platform struct to enable the functionality. Signed-off-by: Ulf Hansson Signed-off-by: Russell King --- diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 150772395cc6..fba51073e94f 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -202,6 +202,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) clk |= MCI_ST_8BIT_BUS; + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50) + clk |= MCI_ST_UX500_NEG_EDGE; + mmci_write_clkreg(host, clk); } @@ -680,6 +683,9 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) mmci_write_clkreg(host, clk); } + if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50) + datactrl |= MCI_ST_DPSM_DDRMODE; + /* * Attempt to use DMA operation mode, if this * should fail, fall back to PIO mode