From: Kevin Hilman Date: Tue, 10 Jul 2012 22:29:04 +0000 (-0700) Subject: ARM: OMAP: omap_device: don't attempt late suspend if no driver bound X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=72bb6f9;p=deliverable%2Flinux.git ARM: OMAP: omap_device: don't attempt late suspend if no driver bound Currently, the omap_device PM domain layer uses the late suspend and early resume callbacks to ensure devices are in their low power states. However, this is attempted even in cases where a driver probe has failed. If a driver's ->probe() method fails, the driver is likely in a state where it is not expecting its runtime PM callbacks to be called, yet currently the omap_device PM domain code attempts to call the drivers callbacks. To fix, use the omap_device driver_status field to check whether a driver is bound to the omap_device before attempting to trigger driver callbacks. Reviewed-by: Paul Walmsley Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 1d1b5ff78306..150112e3ffc8 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -756,6 +756,10 @@ static int _od_suspend_noirq(struct device *dev) struct omap_device *od = to_omap_device(pdev); int ret; + /* Don't attempt late suspend on a driver that is not bound */ + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) + return 0; + ret = pm_generic_suspend_noirq(dev); if (!ret && !pm_runtime_status_suspended(dev)) {