From: Richard Sandiford Date: Wed, 21 Sep 2016 15:49:31 +0000 (+0100) Subject: [AArch64][SVE 12/32] Remove boolean parameters from parse_address_main X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=73866052f244927457202e4b0d1542bea529878f;p=deliverable%2Fbinutils-gdb.git [AArch64][SVE 12/32] Remove boolean parameters from parse_address_main In the review of the original version of this series, Richard didn't like the use of boolean parameters to parse_address_main. I think we can just get rid of them and leave the callers to check the addressing modes. As it happens, the handling of ADDR_SIMM9{,_2} already did this for relocation operators (i.e. it used parse_address_reloc and then rejected relocations). The callers are already set up to reject invalid register post-indexed addressing, so we can simply remove the accept_reg_post_index parameter without adding any more checks. This again creates a corner case where: .equ x2, 1 ldr w0, [x1], x2 was previously an acceptable way of writing "ldr w0, [x1], #1" but is now rejected. Removing the "reloc" parameter means that two cases need to check explicitly for relocation operators. ADDR_SIMM9_2 appers to be unused. I'll send a separate patch to remove it. This patch makes parse_address temporarily equivalent to parse_address_main, but later patches in the series will need to keep the distinction. gas/ * config/tc-aarch64.c (parse_address_main): Remove reloc and accept_reg_post_index parameters. Parse relocations and register post indexes unconditionally. (parse_address): Remove accept_reg_post_index parameter. Update call to parse_address_main. (parse_address_reloc): Delete. (parse_operands): Call parse_address instead of parse_address_main. Update existing callers of parse_address and make them check inst.reloc.type where appropriate. * testsuite/gas/aarch64/diagnostic.s: Add tests for relocations in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses. Also test for invalid uses of post-index register addressing. * testsuite/gas/aarch64/diagnostic.l: Update accordingly. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index e56f239e27..d7df100d64 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,19 @@ +2016-09-21 Richard Sandiford + + * config/tc-aarch64.c (parse_address_main): Remove reloc and + accept_reg_post_index parameters. Parse relocations and register + post indexes unconditionally. + (parse_address): Remove accept_reg_post_index parameter. + Update call to parse_address_main. + (parse_address_reloc): Delete. + (parse_operands): Call parse_address instead of parse_address_main. + Update existing callers of parse_address and make them check + inst.reloc.type where appropriate. + * testsuite/gas/aarch64/diagnostic.s: Add tests for relocations + in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses. + Also test for invalid uses of post-index register addressing. + * testsuite/gas/aarch64/diagnostic.l: Update accordingly. + 2016-09-21 Richard Sandiford * config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register diff --git a/gas/config/tc-aarch64.c b/gas/config/tc-aarch64.c index 7b5be8b2f9..f82fdb9645 100644 --- a/gas/config/tc-aarch64.c +++ b/gas/config/tc-aarch64.c @@ -3173,8 +3173,7 @@ parse_shifter_operand_reloc (char **str, aarch64_opnd_info *operand, supported by the instruction, and to set inst.reloc.type. */ static bfd_boolean -parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, - int accept_reg_post_index) +parse_address_main (char **str, aarch64_opnd_info *operand) { char *p = *str; const reg_entry *reg; @@ -3190,7 +3189,7 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, /* #:: */ skip_past_char (&p, '#'); - if (reloc && skip_past_char (&p, ':')) + if (skip_past_char (&p, ':')) { bfd_reloc_code_real_type ty; struct reloc_table_entry *entry; @@ -3315,7 +3314,7 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, { /* [Xn,#:: */ skip_past_char (&p, '#'); - if (reloc && skip_past_char (&p, ':')) + if (skip_past_char (&p, ':')) { struct reloc_table_entry *entry; @@ -3388,8 +3387,8 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, return FALSE; } - if (accept_reg_post_index - && (reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier))) + reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier); + if (reg) { /* [Xn],Xm */ if (!aarch64_check_reg_type (reg, REG_TYPE_R_64)) @@ -3428,19 +3427,12 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc, return TRUE; } -/* Return TRUE on success; otherwise return FALSE. */ -static bfd_boolean -parse_address (char **str, aarch64_opnd_info *operand, - int accept_reg_post_index) -{ - return parse_address_main (str, operand, 0, accept_reg_post_index); -} - -/* Return TRUE on success; otherwise return FALSE. */ +/* Parse a base AArch64 address (as opposed to an SVE one). Return TRUE + on success. */ static bfd_boolean -parse_address_reloc (char **str, aarch64_opnd_info *operand) +parse_address (char **str, aarch64_opnd_info *operand) { - return parse_address_main (str, operand, 1, 0); + return parse_address_main (str, operand); } /* Parse an operand for a MOVZ, MOVN or MOVK instruction. @@ -5419,7 +5411,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_ADDR_PCREL19: case AARCH64_OPND_ADDR_PCREL21: case AARCH64_OPND_ADDR_PCREL26: - po_misc_or_fail (parse_address_reloc (&str, info)); + po_misc_or_fail (parse_address (&str, info)); if (!info->addr.pcrel) { set_syntax_error (_("invalid pc-relative address")); @@ -5490,7 +5482,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) char *start = str; /* First use the normal address-parsing routines, to get the usual syntax errors. */ - po_misc_or_fail (parse_address (&str, info, 0)); + po_misc_or_fail (parse_address (&str, info)); if (info->addr.pcrel || info->addr.offset.is_reg || !info->addr.preind || info->addr.postind || info->addr.writeback) @@ -5521,7 +5513,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_ADDR_REGOFF: /* [, {, {}}] */ - po_misc_or_fail (parse_address (&str, info, 0)); + po_misc_or_fail (parse_address (&str, info)); if (info->addr.pcrel || !info->addr.offset.is_reg || !info->addr.preind || info->addr.postind || info->addr.writeback) @@ -5540,13 +5532,18 @@ parse_operands (char *str, const aarch64_opcode *opcode) break; case AARCH64_OPND_ADDR_SIMM7: - po_misc_or_fail (parse_address (&str, info, 0)); + po_misc_or_fail (parse_address (&str, info)); if (info->addr.pcrel || info->addr.offset.is_reg || (!info->addr.preind && !info->addr.postind)) { set_syntax_error (_("invalid addressing mode")); goto failure; } + if (inst.reloc.type != BFD_RELOC_UNUSED) + { + set_syntax_error (_("relocation not allowed")); + goto failure; + } assign_imm_if_const_or_fixup_later (&inst.reloc, info, /* addr_off_p */ 1, /* need_libopcodes_p */ 1, @@ -5555,7 +5552,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_ADDR_SIMM9: case AARCH64_OPND_ADDR_SIMM9_2: - po_misc_or_fail (parse_address_reloc (&str, info)); + po_misc_or_fail (parse_address (&str, info)); if (info->addr.pcrel || info->addr.offset.is_reg || (!info->addr.preind && !info->addr.postind) || (operands[i] == AARCH64_OPND_ADDR_SIMM9_2 @@ -5576,7 +5573,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) break; case AARCH64_OPND_ADDR_UIMM12: - po_misc_or_fail (parse_address_reloc (&str, info)); + po_misc_or_fail (parse_address (&str, info)); if (info->addr.pcrel || info->addr.offset.is_reg || !info->addr.preind || info->addr.writeback) { @@ -5596,7 +5593,7 @@ parse_operands (char *str, const aarch64_opcode *opcode) case AARCH64_OPND_SIMD_ADDR_POST: /* [], > */ - po_misc_or_fail (parse_address (&str, info, 1)); + po_misc_or_fail (parse_address (&str, info)); if (!info->addr.postind || !info->addr.writeback) { set_syntax_error (_("invalid addressing mode")); diff --git a/gas/testsuite/gas/aarch64/diagnostic.l b/gas/testsuite/gas/aarch64/diagnostic.l index ef2357759f..0fb4db95d8 100644 --- a/gas/testsuite/gas/aarch64/diagnostic.l +++ b/gas/testsuite/gas/aarch64/diagnostic.l @@ -150,3 +150,11 @@ [^:]*:264: Error: invalid floating-point constant at operand 2 -- `fmov s0,-2' [^:]*:266: Error: integer 64-bit register expected at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],xzr' [^:]*:267: Error: integer or zero register expected at operand 2 -- `str x1,\[x2,sp\]' +[^:]*:270: Error: relocation not allowed at operand 3 -- `ldnp x1,x2,\[x3,#:lo12:foo\]' +[^:]*:271: Error: invalid addressing mode at operand 2 -- `ld1 {v0\.4s},\[x3,#:lo12:foo\]' +[^:]*:272: Error: the optional immediate offset can only be 0 at operand 2 -- `stuminl x0,\[x3,#:lo12:foo\]' +[^:]*:273: Error: relocation not allowed at operand 2 -- `prfum pldl1keep,\[x3,#:lo12:foo\]' +[^:]*:275: Error: invalid addressing mode at operand 2 -- `ldr x0,\[x3\],x4' +[^:]*:276: Error: invalid addressing mode at operand 3 -- `ldnp x1,x2,\[x3\],x4' +[^:]*:278: Error: invalid addressing mode at operand 2 -- `stuminl x0,\[x3\],x4' +[^:]*:279: Error: invalid addressing mode at operand 2 -- `prfum pldl1keep,\[x3\],x4' diff --git a/gas/testsuite/gas/aarch64/diagnostic.s b/gas/testsuite/gas/aarch64/diagnostic.s index 8dbb542233..a9cd1249fa 100644 --- a/gas/testsuite/gas/aarch64/diagnostic.s +++ b/gas/testsuite/gas/aarch64/diagnostic.s @@ -265,3 +265,15 @@ st2 {v0.4s, v1.4s}, [sp], xzr str x1, [x2, sp] + + ldr x0, [x1, #:lo12:foo] // OK + ldnp x1, x2, [x3, #:lo12:foo] + ld1 {v0.4s}, [x3, #:lo12:foo] + stuminl x0, [x3, #:lo12:foo] + prfum pldl1keep, [x3, #:lo12:foo] + + ldr x0, [x3], x4 + ldnp x1, x2, [x3], x4 + ld1 {v0.4s}, [x3], x4 // OK + stuminl x0, [x3], x4 + prfum pldl1keep, [x3], x4