From: Jane Wan Date: Fri, 1 May 2015 23:37:42 +0000 (-0700) Subject: spi: fsl-espi: Fix an error that can cause fsl espi task blocked X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=7a0a1759f7b157f56b8f291f3664db4b65963c8a;p=deliverable%2Flinux.git spi: fsl-espi: Fix an error that can cause fsl espi task blocked Incorrect condition is used in spin_event_timeout(). When the TX is done, the SPIE_NF bit in ESPI_SPIE register is set to 1 to indicate the Tx FIFO is not full. If the bit is 0, it indicates the Tx FIFO is full. Due to this error, if the Tx FIFO is full at the beginning, but becomes not full after handling the Rx FIFO (the SPIE_NF bit is set), the spin_event_timeout() returns with timeout occurred. It causes the interrupt handler not to send completion notification to the thread that called wait_for_complete() waiting for the notification. Signed-off-by: Jane Wan Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c index d0a73a09a9bd..a0dbb51630d9 100644 --- a/drivers/spi/spi-fsl-espi.c +++ b/drivers/spi/spi-fsl-espi.c @@ -544,9 +544,13 @@ void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) /* spin until TX is done */ ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( - ®_base->event)) & SPIE_NF) == 0, 1000, 0); + ®_base->event)) & SPIE_NF), 1000, 0); if (!ret) { dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + + /* Clear the SPIE bits */ + mpc8xxx_spi_write_reg(®_base->event, events); + complete(&mspi->done); return; } }