From: Arnaud Ebalard Date: Fri, 24 Oct 2014 21:22:16 +0000 (+0200) Subject: arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=7bb2fe59f9f65bf66767b18dc338811df4b2c3e2;p=deliverable%2Flinux.git arm: mvebu: Clarify (e)SATA ports info in NETGEAR ReadyNAS 102 .dts file On NETGEAR ReadyNAS 102, the two disks are connected to the external Marvell 88SE9170 SATA Controller connected to the PCIe bus. The rear eSATA port is connected to the native Armada 370 SATA controller. This patch updates the comments in .dts file wrt SATA interfaces and reduces the number of ports for native Armada 370 interface from 2 to 1. Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Acked-by: Gregory CLEMENT Link: https://lkml.kernel.org/r/4af680f9a68281755e31df2491f0590046138230.1414185031.git.arno@natisbad.org Signed-off-by: Jason Cooper --- diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index f79579bdf8fe..1e38628f4060 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -35,7 +35,7 @@ pcie-controller { status = "okay"; - /* Connected to Marvell SATA controller */ + /* Connected to Marvell 88SE9170 SATA controller */ pcie@1,0 { /* Port 0, Lane 0 */ status = "okay"; @@ -53,8 +53,9 @@ status = "okay"; }; + /* eSATA interface */ sata@a0000 { - nr-ports = <2>; + nr-ports = <1>; status = "okay"; };