From: Linus Walleij Date: Tue, 15 Oct 2013 21:00:10 +0000 (+0200) Subject: ARM: ux500: adjust the TC3589x devices to the binding X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=7e0a51a0312da5d1f7cb164355924c5cdf39082d;p=deliverable%2Flinux.git ARM: ux500: adjust the TC3589x devices to the binding The TC3589x devices appearing in the ST Ericsson device trees are adjusted to use the new binding so this is in a good shape, and we add the keypad on the TVK1281618 UIB so this is working again. Signed-off-by: Linus Walleij --- diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 76d3ef13175f..61b180ea92ca 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -15,26 +15,53 @@ / { soc { - /* Add Synaptics touch screen, TC35892 keypad etc here */ + /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { - tc3589x@44 { - compatible = "tc3589x"; + tc35893@44 { + compatible = "toshiba,tc35893"; reg = <0x44>; interrupt-parent = <&gpio6>; interrupts = <26 IRQ_TYPE_EDGE_RISING>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + linux,wakeup; + linux,keymap = <0x0301006b + 0x04010066 + 0x06040072 + 0x040200d7 + 0x0303006a + 0x0205000e + 0x0607008b + 0x0500001c + 0x0403000b + 0x03040034 + 0x05020067 + 0x0305006c + 0x040500e7 + 0x0005009e + 0x06020073 + 0x01030039 + 0x07060069 + 0x050500d9>; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index b2cd7bc2752f..6b271a410d03 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -28,18 +28,18 @@ reg = <0x33>; }; - tc3589x@42 { - compatible = "tc3589x"; + tc35892@42 { + compatible = "toshiba,tc35892"; reg = <0x42>; interrupt-parent = <&gpio6>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>;