From: Sachin Kamat Date: Sun, 6 Oct 2013 00:21:10 +0000 (+0900) Subject: ARM: dts: Add reg property to regulator nodes in exynos5250-arndale X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=8365f763a7816f0b5d04f6cabd359de14b378e52;p=deliverable%2Flinux.git ARM: dts: Add reg property to regulator nodes in exynos5250-arndale For consistency and correctness, since this is a bus, even if not physical, it is worth to add 'reg' property and unit-address to subnodes. The 'reg' property would merely be an index. Also for consistency, use "regulator" as node name as used most commonly across other dts files. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index cee55fa33731..0c425476d4db 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -482,13 +482,15 @@ #address-cells = <1>; #size-cells = <0>; - main_dc_reg: fixedregulator@1 { + main_dc_reg: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "MAIN_DC"; }; - mmc_reg: voltage-regulator { + mmc_reg: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; regulator-name = "VDD_33ON_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; @@ -496,8 +498,9 @@ enable-active-high; }; - reg_hdmi_en: fixedregulator@0 { + reg_hdmi_en: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; regulator-name = "hdmi-en"; }; };