From: Luis de Bethencourt <luisbg@osg.samsung.com>
Date: Fri, 16 Oct 2015 15:22:07 +0000 (+0100)
Subject: spi: davinci: use spi->cs_gpio directly
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=8cae0424787ba02987a6f3a6117f31f6a77260dc;p=deliverable%2Flinux.git

spi: davinci: use spi->cs_gpio directly

Use spi->cs_gpio directly to remove the following build warning:
drivers/spi/spi-davinci.c:219:6: warning: 'gpio' may be used uninitialized in this function

Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 3cf9faa6cc3f..8e2ddd1147aa 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -215,18 +215,10 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	struct davinci_spi_config *spicfg = spi->controller_data;
 	u8 chip_sel = spi->chip_select;
 	u16 spidat1 = CS_DEFAULT;
-	bool gpio_chipsel = false;
-	int gpio;
 
 	dspi = spi_master_get_devdata(spi->master);
 	pdata = &dspi->pdata;
 
-	if (spi->cs_gpio >= 0) {
-		/* SPI core parse and update master->cs_gpio */
-		gpio_chipsel = true;
-		gpio = spi->cs_gpio;
-	}
-
 	/* program delay transfers if tx_delay is non zero */
 	if (spicfg->wdelay)
 		spidat1 |= SPIDAT1_WDEL;
@@ -235,11 +227,12 @@ static void davinci_spi_chipselect(struct spi_device *spi, int value)
 	 * Board specific chip select logic decides the polarity and cs
 	 * line for the controller
 	 */
-	if (gpio_chipsel) {
+	if (spi->cs_gpio >= 0) {
 		if (value == BITBANG_CS_ACTIVE)
-			gpio_set_value(gpio, spi->mode & SPI_CS_HIGH);
+			gpio_set_value(spi->cs_gpio, spi->mode & SPI_CS_HIGH);
 		else
-			gpio_set_value(gpio, !(spi->mode & SPI_CS_HIGH));
+			gpio_set_value(spi->cs_gpio,
+				!(spi->mode & SPI_CS_HIGH));
 	} else {
 		if (value == BITBANG_CS_ACTIVE) {
 			spidat1 |= SPIDAT1_CSHOLD_MASK;