From: J.T. Conklin Date: Fri, 5 Jul 1996 17:35:32 +0000 (+0000) Subject: * config/tc-m68k.c (m68k_ip): The coldfire does not support 8x X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=8d20a0a8834a270c7ab0600aa6964993046536e0;p=deliverable%2Fbinutils-gdb.git * config/tc-m68k.c (m68k_ip): The coldfire does not support 8x scale factor. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index c72031fac0..d51c11110f 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,8 @@ +Fri Jul 5 10:32:58 1996 J.T. Conklin + + * config/tc-m68k.c (m68k_ip): The coldfire does not support 8x + scale factor. + Fri Jul 5 11:07:24 1996 Ian Lance Taylor * symbols.c (S_SET_EXTERNAL): Change as_warn to as_bad. diff --git a/gas/config/tc-m68k.c b/gas/config/tc-m68k.c index cd70be1207..e83bbb0f45 100644 --- a/gas/config/tc-m68k.c +++ b/gas/config/tc-m68k.c @@ -26,12 +26,14 @@ #include "opcode/m68k.h" #include "m68k-parse.h" -/* This array holds the chars that always start a comment. If the - pre-processor is disabled, these aren't very useful */ +/* This string holds the chars that always start a comment. If the + pre-processor is disabled, these aren't very useful. The macro + tc_comment_chars points to this. We use this, rather than the + usual comment_chars, so that the --bitwise-or option will work. */ #if (defined (OBJ_ELF) && ! defined (TE_PSOS) && ! defined (TE_LINUX)) || defined (TE_DELTA) -const char comment_chars[] = "|#"; +const char *m68k_comment_chars = "|#"; #else -const char comment_chars[] = "|"; +const char *m68k_comment_chars = "|"; #endif /* This array holds the chars that only start a comment at the beginning of @@ -158,6 +160,11 @@ static const enum m68k_register m68060_control_regs[] = { USP, VBR, URP, SRP, PCR, 0 }; +static const enum m68k_register mcf5200_control_regs[] = { + CACR, TC, ITT0, ITT1, DTT0, DTT1, VBR, ROMBAR, + RAMBAR0, RAMBAR1, MBAR, + 0 +}; #define cpu32_control_regs m68010_control_regs static const enum m68k_register *control_regs; @@ -211,7 +218,7 @@ struct m68k_it reloc[5]; /* Five is enough??? */ }; -#define cpu_of_arch(x) ((x) & m68000up) +#define cpu_of_arch(x) ((x) & (m68000up|mcf5200)) #define float_of_arch(x) ((x) & mfloat) #define mmu_of_arch(x) ((x) & mmmu) @@ -339,6 +346,7 @@ static const struct m68k_cpu archs[] = { { cpu32, "cpu32", 0 }, { m68881, "68881", 0 }, { m68851, "68851", 0 }, + { mcf5200, "5200", 0 }, /* Aliases (effectively, so far as gas is concerned) for the above cpus. */ { m68020, "68k", 1 }, @@ -350,6 +358,7 @@ static const struct m68k_cpu archs[] = { { m68020, "68ec020", 1 }, { m68030, "68ec030", 1 }, { m68040, "68ec040", 1 }, + { m68060, "68ec060", 1 }, { cpu32, "68330", 1 }, { cpu32, "68331", 1 }, { cpu32, "68332", 1 }, @@ -1331,7 +1340,9 @@ m68k_ip (instring) break; case 'O': - if (opP->mode != DREG && opP->mode != IMMED) + if (opP->mode != DREG + && opP->mode != IMMED + && opP->mode != ABSL) losing++; break; @@ -1848,13 +1859,13 @@ m68k_ip (instring) || opP->index.size == SIZE_LONG) nextword |= 0x800; - if (cpu_of_arch (current_architecture) < m68020) + if ((opP->index.scale != 1 + && cpu_of_arch (current_architecture) < m68020) + || (opP->index.scale == 8 + && current_architecture == mcf5200)) { - if (opP->index.scale != 1) - { - opP->error = - "scale factor invalid on this architecture; needs 68020 or higher"; - } + opP->error = + "scale factor invalid on this architecture; needs cpu32 or 68020 or higher"; } switch (opP->index.scale) @@ -1986,6 +1997,8 @@ m68k_ip (instring) /* Figure out innner displacement stuff */ if (opP->mode == POST || opP->mode == PRE) { + if (cpu_of_arch (current_architecture) & cpu32) + opP->error = "invalid operand mode for this architecture; needs 68020 or higher"; switch (siz2) { case SIZE_UNSPEC: @@ -2359,6 +2372,18 @@ m68k_ip (instring) case PCR: tmpreg = 0x808; break; + case ROMBAR: + tmpreg = 0xC00; + break; + case RAMBAR0: + tmpreg = 0xC04; + break; + case RAMBAR1: + tmpreg = 0xC05; + break; + case MBAR: + tmpreg = 0xC0F; + break; default: abort (); } @@ -2940,29 +2965,52 @@ static const struct init_entry init_table[] = { "ccr", CCR }, { "cc", CCR }, - { "usp", USP }, - { "isp", ISP }, - { "sfc", SFC }, + /* control registers */ + { "sfc", SFC }, /* Source Function Code */ { "sfcr", SFC }, - { "dfc", DFC }, + { "dfc", DFC }, /* Destination Function Code */ { "dfcr", DFC }, - { "cacr", CACR }, - { "caar", CAAR }, - - { "vbr", VBR }, - - { "msp", MSP }, - { "itt0", ITT0 }, - { "itt1", ITT1 }, - { "dtt0", DTT0 }, - { "dtt1", DTT1 }, - { "mmusr", MMUSR }, - { "tc", TC }, - { "srp", SRP }, - { "urp", URP }, + { "cacr", CACR }, /* Cache Control Register */ + { "caar", CAAR }, /* Cache Address Register */ + + { "usp", USP }, /* User Stack Pointer */ + { "vbr", VBR }, /* Vector Base Register */ + { "msp", MSP }, /* Master Stack Pointer */ + { "isp", ISP }, /* Interrupt Stack Pointer */ + + { "itt0", ITT0 }, /* Instruction Transparent Translation Reg 0 */ + { "itt1", ITT1 }, /* Instruction Transparent Translation Reg 1 */ + { "dtt0", DTT0 }, /* Data Transparent Translation Register 0 */ + { "dtt1", DTT1 }, /* Data Transparent Translation Register 1 */ + + /* 68ec040 versions of same */ + { "iacr0", ITT0 }, /* Instruction Access Control Register 0 */ + { "iacr1", ITT1 }, /* Instruction Access Control Register 0 */ + { "dacr0", DTT0 }, /* Data Access Control Register 0 */ + { "dacr1", DTT1 }, /* Data Access Control Register 0 */ + + /* mcf5200 versions of same */ + { "acr2", ITT0 }, /* Access Control Unit 2 */ + { "acr3", ITT1 }, /* Access Control Unit 3 */ + { "acr0", DTT0 }, /* Access Control Unit 0 */ + { "acr1", DTT1 }, /* Access Control Unit 1 */ + + { "tc", TC }, /* MMU Translation Control Register */ + { "tcr", TC }, + + { "mmusr", MMUSR }, /* MMU Status Register */ + { "srp", SRP }, /* User Root Pointer */ + { "urp", URP }, /* Supervisor Root Pointer */ + { "buscr", BUSCR }, { "pcr", PCR }, + { "rombar", ROMBAR }, /* ROM Base Address Register */ + { "rambar0", RAMBAR0 }, /* ROM Base Address Register */ + { "rambar1", RAMBAR1 }, /* ROM Base Address Register */ + { "mbar", MBAR }, /* Module Base Address Register */ + /* end of control registers */ + { "ac", AC }, { "bc", BC }, { "cal", CAL }, @@ -3375,6 +3423,20 @@ md_begin () */ alt_notend_table['@'] = 1; + /* We need to put digits in alt_notend_table to handle + bfextu %d0{24:1},%d0 + */ + alt_notend_table['0'] = 1; + alt_notend_table['1'] = 1; + alt_notend_table['2'] = 1; + alt_notend_table['3'] = 1; + alt_notend_table['4'] = 1; + alt_notend_table['5'] = 1; + alt_notend_table['6'] = 1; + alt_notend_table['7'] = 1; + alt_notend_table['8'] = 1; + alt_notend_table['9'] = 1; + #ifndef MIT_SYNTAX_ONLY /* Insert pseudo ops, these have to go into the opcode table since gas expects pseudo ops to start with a dot */ @@ -3487,6 +3549,9 @@ m68k_init_after_args () case cpu32: control_regs = cpu32_control_regs; break; + case mcf5200: + control_regs = mcf5200_control_regs; + break; default: abort (); } @@ -6129,6 +6194,9 @@ s_mri_endw (ignore) * -pic Indicates PIC. * -k Indicates PIC. (Sun 3 only.) * + * --bitwise-or + * Permit `|' to be used in expressions. + * */ #ifdef OBJ_ELF @@ -6143,6 +6211,8 @@ struct option md_longopts[] = { #define OPTION_REGISTER_PREFIX_OPTIONAL (OPTION_MD_BASE + 1) {"register-prefix-optional", no_argument, NULL, OPTION_REGISTER_PREFIX_OPTIONAL}, +#define OPTION_BITWISE_OR (OPTION_MD_BASE + 2) + {"bitwise-or", no_argument, NULL, OPTION_BITWISE_OR}, {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof(md_longopts); @@ -6260,6 +6330,21 @@ md_parse_option (c, arg) case 'Q': break; + case OPTION_BITWISE_OR: + { + char *n, *t; + const char *s; + + n = (char *) xmalloc (strlen (m68k_comment_chars) + 1); + t = n; + for (s = m68k_comment_chars; *s != '\0'; s++) + if (*s != '|') + *t++ = *s; + *t = '\0'; + m68k_comment_chars = n; + } + break; + default: return 0; } @@ -6276,7 +6361,7 @@ md_show_usage (stream) -l use 1 word for refs to undefined symbols [default 2]\n\ -m68000 | -m68008 | -m68010 | -m68020 | -m68030 | -m68040 | -m68060\n\ | -m68302 | -m68331 | -m68332 | -m68333 | -m68340 | -m68360\n\ - | -mcpu32\n\ + | -mcpu32 | -mcf5200\n\ specify variant of 680X0 architecture [default 68020]\n\ -m68881 | -m68882 | -mno-68881 | -mno-68882\n\ target has/lacks floating-point coprocessor\n\ @@ -6288,7 +6373,8 @@ md_show_usage (stream) -pic, -k generate position independent code\n\ -S turn jbsr into jsr\n\ --register-prefix-optional\n\ - recognize register names without prefix character\n"); + recognize register names without prefix character\n\ +--bitwise-or do not treat `|' as a comment character\n"); } #ifdef TEST2