From: Chuck Meade Date: Fri, 18 Jun 2010 13:22:26 +0000 (-0400) Subject: drivers/serial/ucc_uart.c: Add missing call to init UCC UART port timeout X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=8e18862d52b8ecd62354dad117aff22391b2c4e5;p=deliverable%2Flinux.git drivers/serial/ucc_uart.c: Add missing call to init UCC UART port timeout The UCC UART driver is missing a call to uart_update_timeout(). Without this call, attempting to close the port after outputting large amounts of data (i.e. using tty and uart buffering) results in long timeouts before the port will actually be shut down. For example, cat a large file to a UCC UART port. With the current driver, the port will stay open for 30 seconds after the last byte of data is output. But with this patch, the port is closed as expected, just after the data has been output (tx fifos empty). Signed-off-by: Chuck Meade Acked-by: Timur Tabi Signed-off-by: Kumar Gala --- diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index cea8918b8233..2ebe606a2db1 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -963,6 +963,9 @@ static void qe_uart_set_termios(struct uart_port *port, /* Do we really need a spinlock here? */ spin_lock_irqsave(&port->lock, flags); + /* Update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + out_be16(&uccp->upsmr, upsmr); if (soft_uart) { out_be16(&uccup->supsmr, supsmr);