From: Simon Wunderlich Date: Wed, 14 Aug 2013 06:01:30 +0000 (+0200) Subject: ath9k: always use SIFS times from OFDM for 5/10 MHz X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=92367fe7f24159d6ba83276bc7a0f45c6f663837;p=deliverable%2Flinux.git ath9k: always use SIFS times from OFDM for 5/10 MHz 5/10 MHz channels should always use SIFS times as defined in IEEE 802.11-2012 18.4.4 (OFDM PHY characteristics). This makes it compatible to ath5k, which does the same. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 151443bddbde..b3a6891fe3d7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1069,7 +1069,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) if (IS_CHAN_A_FAST_CLOCK(ah, chan)) tx_lat += 11; - sifstime *= 2; + sifstime = 32; ack_offset = 16; slottime = 13; } else if (IS_CHAN_QUARTER_RATE(chan)) { @@ -1079,7 +1079,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) if (IS_CHAN_A_FAST_CLOCK(ah, chan)) tx_lat += 22; - sifstime *= 4; + sifstime = 64; ack_offset = 32; slottime = 21; } else { @@ -1116,7 +1116,6 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah) ctstimeout += 48 - sifstime - ah->slottime; } - ath9k_hw_set_sifs_time(ah, sifstime); ath9k_hw_setslottime(ah, slottime); ath9k_hw_set_ack_timeout(ah, acktimeout);