From: Roland Pesch Date: Tue, 2 Feb 1993 21:38:40 +0000 (+0000) Subject: Minor stylistic cleanup; eliminated more contractions, eliminated X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=93918348e5e975b084473806e9141d0217bf2294;p=deliverable%2Fbinutils-gdb.git Minor stylistic cleanup; eliminated more contractions, eliminated possessives on things (like name of GDB) that are not English, and incidentals spotted while pursuing these. --- diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 35d9d2256a..9c3bcf6cb6 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -180,7 +180,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. @end ifset * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -198,7 +198,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. @end menu @end ignore @c -@c Since that doesn't work, we must unroll the above into 16 cases: +@c Since that does not work, we must unroll the above into 16 cases: @c @c Menu for NOVEL && !BARETARGET && !CONLY && !DOSHOST @ifset NOVEL @@ -219,7 +219,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -255,7 +255,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -290,7 +290,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language Support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -326,7 +326,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language Support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -360,7 +360,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -395,7 +395,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -429,7 +429,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -464,7 +464,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -498,7 +498,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -532,7 +532,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -565,7 +565,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -599,7 +599,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -631,7 +631,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -664,7 +664,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * Languages:: Using @value{GDBN} with different languages * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -696,7 +696,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language Support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -729,7 +729,7 @@ This is Edition 4.07, January 1993, for GDB Version @value{GDBVN}. * C:: C Language Support * Symbols:: Examining the symbol table * Altering:: Altering execution -* GDB Files:: @value{GDBN}'s files +* GDB Files:: @value{GDBN} files * Targets:: Specifying a debugging target * Controlling GDB:: Controlling @value{GDBN} * Sequences:: Canned sequences of commands @@ -815,13 +815,13 @@ Changes much prior to version 2.0 are lost in the mists of time. @quotation @emph{Plea:} Additions to this section are particularly welcome. If you -or your friends (or enemies; let's be evenhanded) have been unfairly +or your friends (or enemies, to be evenhanded) have been unfairly omitted from this list, we would like to add your names! @end quotation So that they may not regard their long labor as thankless, we particularly thank those who shepherded GDB through major releases: Stu -Grossman and John Gilmore (releases 4.6, 4.5, 4.4), John Gilmore +Grossman and John Gilmore (releases 4.8, 4.7, 4.6, 4.5, 4.4), John Gilmore (releases 4.3, 4.2, 4.1, 4.0, and 3.9); Jim Kingdon (releases 3.5, 3.4, 3.3); and Randy Smith (releases 3.2, 3.1, 3.0). As major maintainer of GDB for some period, each contributed significantly to the structure, @@ -908,7 +908,7 @@ GDB uses a new library called the Binary File Descriptor (BFD) Library to permit it to switch dynamically, without reconfiguration or recompilation, between different object-file formats. Formats currently supported are COFF, a.out, and the Intel 960 b.out; files may be read as -.o's, archive libraries, or core dumps. BFD is available as a +.o files, archive libraries, or core dumps. BFD is available as a subroutine library so that other programs may take advantage of it, and the other GNU binary utilities are being converted to use it. @@ -920,8 +920,8 @@ cross-debugger. @xref{Installing GDB}, for details on how to configure. @item Interaction -The user interface to GDB's control variables has been simplified -and consolidated in two commands, @code{set} and @code{show}. Output +The user interface to the GDB control variables is simpler, +and is consolidated in two commands, @code{set} and @code{show}. Output lines are now broken at readable places, rather than overflowing onto the next line. You can suppress output of machine-level addresses, displaying only source language information. @@ -980,8 +980,8 @@ to make it easier to pick out from the surrounding output. One of the preliminary versions of GNU @code{m4} (a generic macro processor) exhibits the following bug: sometimes, when we change its -quote strings from the default, the commands used to capture one macro's -definition in another stop working. In the following short @code{m4} +quote strings from the default, the commands used to capture one macro +definition within another stop working. In the following short @code{m4} session, we define a macro @code{foo} which expands to @code{0000}; we then use the @code{m4} built-in @code{defn} to define @code{bar} as the same thing. However, when we change the open quote string to @@ -1008,7 +1008,7 @@ m4: End of input: 0: fatal error: EOF in string @end smallexample @noindent -Let's use @value{GDBN} to try to see what's going on. +Let us use @value{GDBN} to try to see what is going on. @smallexample $ @b{@value{GDBP} m4} @@ -1034,9 +1034,9 @@ will fit in this manual. @end smallexample @noindent -Let's see how the @code{m4} built-in @code{changequote} works. +We need to see how the @code{m4} built-in @code{changequote} works. Having looked at the source, we know the relevant subroutine is -@code{m4_changequote}, so we set a breakpoint there with @value{GDBN}'s +@code{m4_changequote}, so we set a breakpoint there with the @value{GDBN} @code{break} command. @smallexample @@ -1116,7 +1116,7 @@ stack frame for each active subroutine. @end smallexample @noindent -Let's step through a few more lines to see what happens. The first two +We will step through a few more lines to see what happens. The first two times, we can use @samp{s}; the next two times we use @code{n} to avoid falling into the @code{xstrdup} subroutine. @@ -1134,9 +1134,9 @@ def_lquote : xstrdup(lq); @end smallexample @noindent -The last line displayed looks a little odd; let's examine the variables +The last line displayed looks a little odd; we can examine the variables @code{lquote} and @code{rquote} to see if they are in fact the new left -and right quotes we specified. We can use the command @code{p} +and right quotes we specified. We use the command @code{p} (@code{print}) to see their values. @smallexample @@ -1148,8 +1148,8 @@ $2 = 0x35d50 "" @noindent @code{lquote} and @code{rquote} are indeed the new left and right quotes. -Let's look at some context; we can display ten lines of source -surrounding the current line, with the @code{l} (@code{list}) command. +To look at some context, we can display ten lines of source +surrounding the current line with the @code{l} (@code{list}) command. @smallexample (@value{GDBP}) @b{l} @@ -1168,7 +1168,7 @@ surrounding the current line, with the @code{l} (@code{list}) command. @end smallexample @noindent -Let's step past the two lines that set @code{len_lquote} and +Let us step past the two lines that set @code{len_lquote} and @code{len_rquote}, and then examine the values of those variables. @smallexample @@ -1185,8 +1185,8 @@ $4 = 7 @noindent That certainly looks wrong, assuming @code{len_lquote} and @code{len_rquote} are meant to be the lengths of @code{lquote} and -@code{rquote} respectively. Let's try setting them to better values. -We can use the @code{p} command for this, since it'll print the value of +@code{rquote} respectively. We can set them to better values using +the @code{p} command, since it can print the value of any expression---and that expression can include subroutine calls and assignments. @@ -1198,8 +1198,8 @@ $6 = 9 @end smallexample @noindent -Let's see if that fixes the problem of using the new quotes with the -@code{m4} built-in @code{defn}. We can allow @code{m4} to continue +Is that enough to fix the problem of using the new quotes with the +@code{m4} built-in @code{defn}? We can allow @code{m4} to continue executing with the @code{c} (@code{continue}) command, and then try the example that caused trouble initially: @@ -1216,7 +1216,7 @@ baz @noindent Success! The new quotes now work just as well as the default ones. The problem seems to have been just the two typos defining the wrong -lengths. We'll let @code{m4} exit by giving it an EOF as input. +lengths. We allow @code{m4} exit by giving it an EOF as input: @smallexample @b{C-d} @@ -1480,7 +1480,7 @@ and will quickly map in symbol information from it, rather than reading the symbol table from the executable program. The @file{.syms} file is specific to the host machine on which @value{GDBN} is run. -It holds an exact image of @value{GDBN}'s internal symbol table. It cannot be +It holds an exact image of the internal @value{GDBN} symbol table. It cannot be shared across multiple host platforms. @end ifclear @@ -1492,10 +1492,11 @@ This makes startup slower, but makes future operations faster. @end table @ifclear BARETARGET -The @code{-mapped} and @code{-readnow} options are typically combined in order to -build a @file{.syms} file that contains complete symbol information. -A simple GDB invocation to do nothing but build a @file{.syms} file for future -use is: +The @code{-mapped} and @code{-readnow} options are typically combined in +order to build a @file{.syms} file that contains complete symbol +information. (@xref{Files,,Commands to Specify Files}, for information +on @file{.syms} files.) A simple GDB invocation to do nothing but build +a @file{.syms} file for future use is: @example gdb -batch -nx -mapped -readnow programname @@ -1638,7 +1639,7 @@ You can abbreviate a @value{GDBN} command to the first few letters of the comman name, if that abbreviation is unambiguous; and you can repeat certain @value{GDBN} commands by typing just @key{RET}. You can also use the @key{TAB} key to get @value{GDBN} to fill out the rest of a word in a command (or to -show you the alternatives available, if there's more than one possibility). +show you the alternatives available, if there is more than one possibility). @menu * Command Syntax:: How to give commands to @value{GDBN} @@ -1693,17 +1694,17 @@ This is useful mainly in command files (@pxref{Command Files}). @cindex completion @cindex word completion -@value{GDBN} can fill in the rest of a word in a command for you, if there's +@value{GDBN} can fill in the rest of a word in a command for you, if there is only one possibility; it can also show you what the valid possibilities are for the next word in a command, at any time. This works for @value{GDBN} commands, @value{GDBN} subcommands, and the names of symbols in your program. Press the @key{TAB} key whenever you want @value{GDBN} to fill out the rest -of a word. If there's only one possibility, @value{GDBN} will fill in the +of a word. If there is only one possibility, @value{GDBN} will fill in the word, and wait for you to finish the command (or press @key{RET} to enter it). For example, if you type -@c FIXME "@key" doesn't distinguish its argument sufficiently to permit +@c FIXME "@key" does not distinguish its argument sufficiently to permit @c complete accuracy in these examples; space introduced for clarity. @c If texinfo enhancements make it unnecessary, it would be nice to @c replace " @key" by "@key" in the following... @@ -1712,7 +1713,7 @@ enter it). For example, if you type @end example @noindent -@value{GDBN} fills in the rest of the word @samp{breakpoints}, since that's +@value{GDBN} fills in the rest of the word @samp{breakpoints}, since that is the only @code{info} subcommand beginning with @samp{bre}: @example @@ -1722,7 +1723,7 @@ the only @code{info} subcommand beginning with @samp{bre}: @noindent You can either press @key{RET} at this point, to run the @code{info breakpoints} command, or backspace and enter something else, if -@samp{breakpoints} doesn't look like the command you expected. (If you +@samp{breakpoints} does not look like the command you expected. (If you were sure you wanted @code{info breakpoints} in the first place, you might as well just type @key{RET} immediately after @samp{info bre}, to exploit command abbreviations rather than command completion). @@ -2000,8 +2001,8 @@ your luck. @cindex optimized code, debugging @cindex debugging optimized code When you debug a program compiled with @samp{-g -O}, remember that the -optimizer is rearranging your code; the debugger will show you what's -really there. Don't be too surprised when the execution path doesn't +optimizer is rearranging your code; the debugger will show you what is +really there. Do not be too surprised when the execution path does not exactly match your source file! An extreme example: if you define a variable, but never use it, @value{GDBN} will never see that variable---because the compiler optimizes it out of existence. @@ -2082,7 +2083,7 @@ your program. @xref{Environment, ,Your Program's Environment}. @item The @emph{working directory.} Your program inherits its working directory from @value{GDBN}. You can set -@value{GDBN}'s working directory with the @code{cd} command in @value{GDBN}. +the @value{GDBN} working directory with the @code{cd} command in @value{GDBN}. @xref{Working Directory, ,Your Program's Working Directory}. @item The @emph{standard input and output.} @@ -2215,10 +2216,10 @@ rather than assigning it an empty value. @cindex working directory (of your program) Each time you start your program with @code{run}, it inherits its -working directory from the current working directory of @value{GDBN}. @value{GDBN}'s -working directory is initially whatever it inherited from its parent -process (typically the shell), but you can specify a new working -directory in @value{GDBN} with the @code{cd} command. +working directory from the current working directory of @value{GDBN}. +The @value{GDBN} working directory is initially whatever it inherited +from its parent process (typically the shell), but you can specify a new +working directory in @value{GDBN} with the @code{cd} command. The @value{GDBN} working directory also serves as a default for the commands that specify files for @value{GDBN} to operate on. @xref{Files, ,Commands to @@ -2227,11 +2228,11 @@ Specify Files}. @table @code @item cd @var{directory} @kindex cd -Set @value{GDBN}'s working directory to @var{directory}. +Set the @value{GDBN} working directory to @var{directory}. @item pwd @kindex pwd -Print @value{GDBN}'s working directory. +Print the @value{GDBN} working directory. @end table @node Input/Output @@ -2249,7 +2250,7 @@ running your program. @table @code @item info terminal @kindex info terminal -Displays @value{GDBN}'s recorded information about the terminal modes your +Displays information recorded by @value{GDBN} about the terminal modes your program is using. @end table @@ -2327,7 +2328,7 @@ attaching @value{GDBN} to the process. @item detach @kindex detach When you have finished debugging the attached process, you can use the -@code{detach} command to release it from @value{GDBN}'s control. Detaching +@code{detach} command to release it from @value{GDBN} control. Detaching the process continues its execution. After the @code{detach} command, that process and @value{GDBN} become completely independent once more, and you are ready to @code{attach} another process or start one with @code{run}. @@ -2396,8 +2397,8 @@ its children. @item info proc id @kindex info proc id -Report on the process ID's related to your program: its own process id, -the id of its parent, the process group id, and the session id. +Report on the process IDs related to your program: its own process ID, +the ID of its parent, the process group ID, and the session ID. @item info proc status @kindex info proc status @@ -3653,8 +3654,8 @@ of the stack frame just selected. @kindex f Select frame number @var{n}. Recall that frame zero is the innermost (currently executing) frame, frame one is the frame that called the -innermost one, and so on. The highest-numbered frame is @code{main}'s -frame. +innermost one, and so on. The highest-numbered frame is the one for +@code{main}. @item frame @var{addr} @itemx f @var{addr} @@ -4901,7 +4902,7 @@ Show whether C++ virtual function tables are pretty printed, or not. @section Value History @cindex value history -Values printed by the @code{print} command are saved in @value{GDBN}'s @dfn{value +Values printed by the @code{print} command are saved in the @value{GDBN} @dfn{value history} so that you can refer to them in other expressions. Values are kept until the symbol table is re-read or discarded (for example with the @code{file} or @code{symbol-file} commands). When the symbol table @@ -5154,7 +5155,7 @@ On AMD 29000 family processors, registers are saved in a separate ``register stack''. There is no way for @value{GDBN} to determine the extent of this stack. Normally, @value{GDBN} just assumes that the stack is ``large enough''. This may result in @value{GDBN} referencing memory locations that -don't exist. If necessary, you can get around this problem by +do not exist. If necessary, you can get around this problem by specifying the ending address of the register stack with the @code{set rstack_high_address} command. The argument should be an address, which you will probably want to precede with @samp{0x} to specify in @@ -5407,7 +5408,7 @@ each language. @itemx set check type off Set type checking on or off, overriding the default setting for the current working language. Issue a warning if the setting does not -match the language's default. If any type mismatches occur in +match the language default. If any type mismatches occur in evaluating an expression while typechecking is on, @value{GDBN} prints a message and aborts evaluation of the expression. @@ -5468,7 +5469,7 @@ each language. @itemx set check range off Set range checking on or off, overriding the default setting for the current working language. A warning is issued if the setting does not -match the language's default. If a range error occurs, then a message +match the language default. If a range error occurs, then a message is printed and evaluation of the expression is aborted. @item set check range warn @@ -5664,7 +5665,7 @@ Pointer dereferencing. Defined on pointer types. Same precedence as Address operator. Defined on variables. Same precedence as @code{++}. @ifclear CONLY -For debugging C++, @value{GDBN} implements a use of @samp{&} beyond what's +For debugging C++, @value{GDBN} implements a use of @samp{&} beyond what is allowed in the C++ language itself: you can use @samp{&(&@var{ref})} (or, if you prefer, simply @samp{&&@var{ref}} to examine the address where a C++ reference variable (declared with @samp{&@var{ref}}) is @@ -5774,7 +5775,7 @@ Pointer constants are an integral value. @subsubsection C++ Expressions @cindex expressions in C++ -@value{GDBN}'s expression handling has a number of extensions to +@value{GDBN} expression handling has a number of extensions to interpret a significant subset of C++ expressions. @cindex C++ support, not in @sc{coff} @@ -5926,7 +5927,7 @@ designed specifically for use with C++. Here is a summary: @cindex break in overloaded functions @item @r{breakpoint menus} When you want a breakpoint in a function whose name is overloaded, -@value{GDBN}'s breakpoint menus help you specify which function definition +@value{GDBN} breakpoint menus help you specify which function definition you want. @xref{Breakpoint Menus}. @cindex overloading in C++ @@ -5969,9 +5970,9 @@ Control the format for printing virtual function tables. @item @r{Overloaded symbol names} You can specify a particular definition of an overloaded symbol, using -the same notation that's used to declare such symbols in C++: type +the same notation that is used to declare such symbols in C++: type @code{@var{symbol}(@var{types})} rather than just @var{symbol}. You can -also use @value{GDBN}'s command-line word completion facilities to list the +also use the @value{GDBN} command-line word completion facilities to list the available choices, or to finish the type list for you. @xref{Completion,, Command Completion}, for details on how to do this. @end table @@ -6403,7 +6404,7 @@ Some @value{GDBN} commands have little use when debugging Modula-2 programs. Five subcommands of @code{set print} and @code{show print} apply specifically to C and C++: @samp{vtbl}, @samp{demangle}, @samp{asm-demangle}, @samp{object}, and @samp{union}. The first four -apply to C++, and the last to C's @code{union} type, which has no direct +apply to C++, and the last to the C @code{union} type, which has no direct analogue in Modula-2. The @code{@@} operator (@pxref{Expressions, ,Expressions}), while available @@ -6875,13 +6876,13 @@ will be opened for writing as well as reading. @end table @node GDB Files -@chapter @value{GDBN}'s Files +@chapter @value{GDBN} Files @value{GDBN} needs to know the file name of the program to be debugged, both in order to read its symbol table and in order to start your program. @ifclear BARETARGET -To debug a core dump of a previous run, @value{GDBN} must be told the file -name of the core dump. +To debug a core dump of a previous run, you must also tell @value{GDBN} +the name of the core dump file. @end ifclear @menu @@ -6906,9 +6907,9 @@ the command argument given when you start @value{GDBN}, (@pxref{Invocation, @end ifset Occasionally it is necessary to change to a different file during a -@value{GDBN} session. Or you may run @value{GDBN} and forget to specify a file you -want to use. In these situations the @value{GDBN} commands to specify new files -are useful. +@value{GDBN} session. Or you may run @value{GDBN} and forget to specify +a file you want to use. In these situations the @value{GDBN} commands +to specify new files are useful. @table @code @item file @var{filename} @@ -6917,7 +6918,7 @@ are useful. Use @var{filename} as the program to be debugged. It is read for its symbols and for the contents of pure memory. It is also the program executed when you use the @code{run} command. If you do not specify a -directory and the file is not found in @value{GDBN}'s working directory, @value{GDBN} +directory and the file is not found in the @value{GDBN} working directory, @value{GDBN} uses the environment variable @code{PATH} as a list of directories to search, just as the shell does when looking for a program to run. You can change the value of this variable, for both @value{GDBN} and your program, @@ -6948,7 +6949,7 @@ Read symbol table information from file @var{filename}. @code{PATH} is searched when necessary. Use the @code{file} command to get both symbol table and program to run from the same file. -@code{symbol-file} with no argument clears out @value{GDBN}'s information on your +@code{symbol-file} with no argument clears out @value{GDBN} information on your program's symbol table. The @code{symbol-file} command causes @value{GDBN} to forget the contents of its @@ -7002,7 +7003,7 @@ If memory-mapped files are available on your system through the @code{mmap} system call, you can use another option, @samp{-mapped}, to cause @value{GDBN} to write the symbols for your program into a reusable file. Future @value{GDBN} debugging sessions will map in symbol information -from this auxiliary symbol file (if the program hasn't changed), rather +from this auxiliary symbol file (if the program has not changed), rather than spending time reading the symbol table from the executable program. Using the @samp{-mapped} option has the same effect as starting @value{GDBN} with the @samp{-mapped} command-line option. @@ -7010,15 +7011,16 @@ starting @value{GDBN} with the @samp{-mapped} command-line option. You can use both options together, to make sure the auxiliary symbol file has all the symbol information for your program. -The @code{.syms} file is specific to the host machine on which GDB is run. -It holds an exact image of GDB's internal symbol table. It cannot be -shared across multiple host platforms. - The auxiliary symbol file for a program called @var{myprog} is called @samp{@var{myprog}.syms}. Once this file exists (so long as it is newer than the corresponding executable), @value{GDBN} will always attempt to use it when you debug @var{myprog}; no special options or commands are needed. + +The @file{.syms} file is specific to the host machine where you run +@value{GDBN}. It holds an exact image of the internal @value{GDB} +symbol table. It cannot be shared across multiple host platforms. + @c FIXME: for now no mention of directories, since this seems to be in @c flux. 13mar1992 status is that in theory GDB would look either in @c current dir or in same dir as myprog; but issues like competing @@ -7052,7 +7054,7 @@ Depending on what remote debugging facilities are configured into @value{GDBN}, the @code{load} command may be available. Where it exists, it is meant to make @var{filename} (an executable) available for debugging on the remote system---by downloading, or dynamic linking, for example. -@code{load} also records @var{filename}'s symbol table in @value{GDBN}, like +@code{load} also records the @var{filename} symbol table in @value{GDBN}, like the @code{add-symbol-file} command. If your @value{GDBN} does not have a @code{load} command, attempting to @@ -7489,7 +7491,7 @@ configuration of GDB; use @code{help targets} to list them. @node Controlling GDB @chapter Controlling @value{GDBN} -You can alter many aspects of @value{GDBN}'s interaction with you by using +You can alter the way @value{GDBN} interacts with you by using the @code{set} command. For commands controlling how @value{GDBN} displays data, @pxref{Print Settings, ,Print Settings}; other settings are described here. @@ -7737,10 +7739,10 @@ see @code{symbol-file} in @ref{Files, ,Commands to Specify Files}. @table @code @kindex set verbose @item set verbose on -Enables @value{GDBN}'s output of certain informational messages. +Enables @value{GDBN} output of certain informational messages. @item set verbose off -Disables @value{GDBN}'s output of certain informational messages. +Disables @value{GDBN} output of certain informational messages. @kindex show verbose @item show verbose @@ -7927,7 +7929,7 @@ rather than @code{bt}). If an error occurs during the execution of your hook, execution of GDB commands stops and you are returned to the GDB prompt (before the command that you actually typed had a chance to run). -If you try to define a hook which doesn't match any known command, you +If you try to define a hook which does not match any known command, you will get a warning from the @code{define} command. @node Command Files @@ -8804,7 +8806,7 @@ program specified there. To build @code{gdb} in a separate directory, run @code{configure} with the @samp{--srcdir} option to specify where to find the source. -(You'll also need to specify a path to find @code{configure} +(You also need to specify a path to find @code{configure} itself from your working directory. If the path to @code{configure} would be the same as the argument to @samp{--srcdir}, you can leave out the @samp{--srcdir} option; it will be assumed.)