From: Folkert van Heusden <folkert@vanheusden.com>
Date: Tue, 27 Mar 2007 05:47:23 +0000 (-0800)
Subject: baycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure logging
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=939456ac51dd0b6b2b5653823b5655a790e72769;p=deliverable%2Flinux.git

baycom_ser_fdx: also allow i/o ports >= 0x1000 and enhanced failure logging

The baycom_ser_fdx driver did not allow i/o ports >= 0x1000.  Now that
there are pci cards (with rs232 ports) which use for example 0xb800 this
limit should not exists.

Also, for non kernel coders find the cause of problems was challenging so I
added extra logging.

Signed-off-by: Folkert van Heusden <folkert@vanheusden.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index 30baf6ecfc63..17ac6975d70d 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -415,11 +415,18 @@ static int ser12_open(struct net_device *dev)
 
 	if (!dev || !bc)
 		return -ENXIO;
-	if (!dev->base_addr || dev->base_addr > 0x1000-SER12_EXTENT ||
-	    dev->irq < 2 || dev->irq > 15)
+	if (!dev->base_addr || dev->base_addr > 0xffff-SER12_EXTENT ||
+	    dev->irq < 2 || dev->irq > NR_IRQS) {
+		printk(KERN_INFO "baycom_ser_fdx: invalid portnumber (max %u) "
+				"or irq (2 <= irq <= %d)\n",
+				0xffff-SER12_EXTENT, NR_IRQS);
 		return -ENXIO;
-	if (bc->baud < 300 || bc->baud > 4800)
+	}
+	if (bc->baud < 300 || bc->baud > 4800) {
+		printk(KERN_INFO "baycom_ser_fdx: invalid baudrate "
+				"(300...4800)\n");
 		return -EINVAL;
+	}
 	if (!request_region(dev->base_addr, SER12_EXTENT, "baycom_ser_fdx")) {
 		printk(KERN_WARNING "BAYCOM_SER_FSX: I/O port 0x%04lx busy \n", 
 		       dev->base_addr);