From: Ian Abbott Date: Mon, 1 Sep 2014 11:03:46 +0000 (+0100) Subject: staging: comedi: amplc_pci230: simplify pci230_ao_mangle_datum() X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=9405d8724045a84c960a1e4ac9876cf5fb1de35e;p=deliverable%2Flinux.git staging: comedi: amplc_pci230: simplify pci230_ao_mangle_datum() `pci230_ao_mangle_datum()` converts comedi sample values for the AO subdevice to hardware register values. The comedi sample value will be an unsigned value in the range 0 to 4095 (assuming 12-bit resolution). The hardware wants the value shifted so the m.s. bit of the sample in in bit 15. If set to a bipolar range, it also expects a 2's complement value, so the top bit of the sample value needs to be inverted in that case. Simplify the existing code by doing the 2's complement conversion after the shift. That way, it is always bit 15 that is inverted regardless of the resolution. Signed-off-by: Ian Abbott Reviewed-by: H Hartley Sweeten Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index 7fa9c70c98a4..e4151d778834 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -582,18 +582,17 @@ static inline unsigned short pci230_ao_mangle_datum(struct comedi_device *dev, const struct pci230_board *thisboard = comedi_board(dev); struct pci230_private *devpriv = dev->private; - /* - * If a bipolar range was specified, mangle it - * (straight binary->twos complement). - */ - if (devpriv->ao_bipolar) - datum ^= 1 << (thisboard->ao_bits - 1); - /* * PCI230 is 12 bit - stored in upper bits of 16 bit register (lower * four bits reserved for expansion). PCI230+ is also 12 bit AO. */ datum <<= (16 - thisboard->ao_bits); + /* + * If a bipolar range was specified, mangle it + * (straight binary->twos complement). + */ + if (devpriv->ao_bipolar) + datum ^= 0x8000; return datum; }