From: Simon Horman Date: Mon, 20 Jun 2011 23:00:10 +0000 (+0900) Subject: mmc: sdhi: Add write16_hook X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=973ed3af1a570612771ed10dec6506c757767668;p=deliverable%2Flinux.git mmc: sdhi: Add write16_hook Some controllers require waiting for the bus to become idle before writing to some registers. I have implemented this by adding a hook to sd_ctrl_write16() and implementing a hook for SDHI which waits for the bus to become idle. Cc: Guennadi Liakhovetski Cc: Magnus Damm Signed-off-by: Simon Horman Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c index ce500f03df85..774f6439d7ce 100644 --- a/drivers/mmc/host/sh_mobile_sdhi.c +++ b/drivers/mmc/host/sh_mobile_sdhi.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "tmio_mmc.h" @@ -55,6 +56,39 @@ static int sh_mobile_sdhi_get_cd(struct platform_device *pdev) return -ENOSYS; } +static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host) +{ + int timeout = 1000; + + while (--timeout && !(sd_ctrl_read16(host, CTL_STATUS2) & (1 << 13))) + udelay(1); + + if (!timeout) { + dev_warn(host->pdata->dev, "timeout waiting for SD bus idle\n"); + return -EBUSY; + } + + return 0; +} + +static int sh_mobile_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) +{ + switch (addr) + { + case CTL_SD_CMD: + case CTL_STOP_INTERNAL_ACTION: + case CTL_XFER_BLK_COUNT: + case CTL_SD_CARD_CLK_CTL: + case CTL_SD_XFER_LEN: + case CTL_SD_MEM_CARD_OPT: + case CTL_TRANSACTION_CTL: + case CTL_DMA_ENABLE: + return sh_mobile_sdhi_wait_idle(host); + } + + return 0; +} + static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) { struct sh_mobile_sdhi *priv; @@ -86,6 +120,8 @@ static int __devinit sh_mobile_sdhi_probe(struct platform_device *pdev) mmc_data->hclk = clk_get_rate(priv->clk); mmc_data->set_pwr = sh_mobile_sdhi_set_pwr; mmc_data->get_cd = sh_mobile_sdhi_get_cd; + if (mmc_data->flags & TMIO_MMC_HAS_IDLE_WAIT) + mmc_data->write16_hook = sh_mobile_sdhi_write16_hook; mmc_data->capabilities = MMC_CAP_MMC_HIGHSPEED; if (p) { mmc_data->flags = p->tmio_flags; diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index 0c22df0f954d..211ef6e7a820 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -153,6 +153,11 @@ static inline u32 sd_ctrl_read32(struct tmio_mmc_host *host, int addr) static inline void sd_ctrl_write16(struct tmio_mmc_host *host, int addr, u16 val) { + /* If there is a hook and it returns non-zero then there + * is an error and the write should be skipped + */ + if (host->pdata->write16_hook && host->pdata->write16_hook(host, addr)) + return; writew(val, host->ctl + (addr << host->bus_shift)); } diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 5a90266c3a5a..0dc98044d8b7 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -68,6 +68,11 @@ * controller and report the event to the driver. */ #define TMIO_MMC_HAS_COLD_CD (1 << 3) +/* + * Some controllers require waiting for the SD bus to become + * idle before writing to some registers. + */ +#define TMIO_MMC_HAS_IDLE_WAIT (1 << 4) int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); @@ -80,6 +85,8 @@ struct tmio_mmc_dma { int alignment_shift; }; +struct tmio_mmc_host; + /* * data for the MMC controller */ @@ -94,6 +101,7 @@ struct tmio_mmc_data { void (*set_pwr)(struct platform_device *host, int state); void (*set_clk_div)(struct platform_device *host, int state); int (*get_cd)(struct platform_device *host); + int (*write16_hook)(struct tmio_mmc_host *host, int addr); }; static inline void tmio_mmc_cd_wakeup(struct tmio_mmc_data *pdata) diff --git a/include/linux/mmc/tmio.h b/include/linux/mmc/tmio.h index 3ae377623db0..a1c1f321e519 100644 --- a/include/linux/mmc/tmio.h +++ b/include/linux/mmc/tmio.h @@ -21,6 +21,7 @@ #define CTL_XFER_BLK_COUNT 0xa #define CTL_RESPONSE 0x0c #define CTL_STATUS 0x1c +#define CTL_STATUS2 0x1e #define CTL_IRQ_MASK 0x20 #define CTL_SD_CARD_CLK_CTL 0x24 #define CTL_SD_XFER_LEN 0x26