From: Nithin Sujir Date: Sat, 31 Aug 2013 00:01:36 +0000 (-0700) Subject: tg3: Don't turn off led on 5719 serdes port 0 X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=989038e217e94161862a959e82f9a1ecf8dda152;p=deliverable%2Flinux.git tg3: Don't turn off led on 5719 serdes port 0 Turning off led on port 0 of the 5719 serdes causes all other ports to lose power and stop functioning. Add tg3_phy_led_bug() function to check for this condition. We use a switch() in tg3_phy_led_bug() for consistency with the tg3_phy_power_bug() function. Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 0da2214ef1b9..9d289d33f66d 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -3030,6 +3030,19 @@ static bool tg3_phy_power_bug(struct tg3 *tp) return false; } +static bool tg3_phy_led_bug(struct tg3 *tp) +{ + switch (tg3_asic_rev(tp)) { + case ASIC_REV_5719: + if ((tp->phy_flags & TG3_PHYFLG_MII_SERDES) && + !tp->pci_fn) + return true; + return false; + } + + return false; +} + static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) { u32 val; @@ -3077,8 +3090,9 @@ static void tg3_power_down_phy(struct tg3 *tp, bool do_low_power) } return; } else if (do_low_power) { - tg3_writephy(tp, MII_TG3_EXT_CTRL, - MII_TG3_EXT_CTRL_FORCE_LED_OFF); + if (!tg3_phy_led_bug(tp)) + tg3_writephy(tp, MII_TG3_EXT_CTRL, + MII_TG3_EXT_CTRL_FORCE_LED_OFF); val = MII_TG3_AUXCTL_PCTL_100TX_LPWR | MII_TG3_AUXCTL_PCTL_SPR_ISOLATE |