From: Lee Jones <lee.jones@linaro.org>
Date: Wed, 24 Oct 2012 10:21:35 +0000 (+0100)
Subject: ARM: ux500: Change the type of interrupt to something compatible
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=98c52c7c676b047e67c235616cc3fefad05c04d4;p=deliverable%2Flinux.git

ARM: ux500: Change the type of interrupt to something compatible

On boot the Nomadik GPIO controller complains that an IRQ can't be
configured as active high level-sensitive, so this patch converts
it to be low-to-high edge triggered instead.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---

diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index 6c7e492f220b..39446a247e79 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -15,7 +15,7 @@
 			stmpe1601: stmpe1601@40 {
 				compatible = "st,stmpe1601";
 				reg = <0x40>;
-				interrupts = <26 0x4>;
+				interrupts = <26 0x1>;
 				interrupt-parent = <&gpio6>;
 				interrupt-controller;