From: Magnus Damm Date: Wed, 19 May 2010 10:29:47 +0000 (+0000) Subject: ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=9b7c23adb350a108737a993c9c781463c1439dc6;p=deliverable%2Flinux.git ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE Change INTCS_VECT_BASE from 0x3400 to 0x2200. The old value 0x3400 gave the INTCA and INTCS interrupt conrollers separated spaces, but required ARM support for more than 512 NR_IRQS which is not in place at this point. The value 0x2200 will make some of the INTCA interrupts make use of empty INTCS areas. This is a bit more error prone but works fine as a workaround for G3, G3 and AP4. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index 51b4a6ab6c60..e881797648a9 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -9,7 +9,7 @@ #define irq2evt(irq) (((irq) + 16) << 5) /* INTCS */ -#define INTCS_VECT_BASE 0x3400 +#define INTCS_VECT_BASE 0x2200 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) #define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))