From: Greg Kroah-Hartman Date: Tue, 25 Nov 2014 08:38:17 +0000 (-0800) Subject: Input: xpad - use proper endpoint type X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=a1f9a4072655843fc03186acbad65990cc05dd2d;p=deliverable%2Flinux.git Input: xpad - use proper endpoint type The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" Signed-off-by: Greg Kroah-Hartman Cc: stable Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 2ed7905a068f..fc55f0d15b70 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -1179,9 +1179,19 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } ep_irq_in = &intf->cur_altsetting->endpoint[1].desc; - usb_fill_bulk_urb(xpad->bulk_out, udev, - usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress), - xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad); + if (usb_endpoint_is_bulk_out(ep_irq_in)) { + usb_fill_bulk_urb(xpad->bulk_out, udev, + usb_sndbulkpipe(udev, + ep_irq_in->bEndpointAddress), + xpad->bdata, XPAD_PKT_LEN, + xpad_bulk_out, xpad); + } else { + usb_fill_int_urb(xpad->bulk_out, udev, + usb_sndintpipe(udev, + ep_irq_in->bEndpointAddress), + xpad->bdata, XPAD_PKT_LEN, + xpad_bulk_out, xpad, 0); + } /* * Submit the int URB immediately rather than waiting for open