From: Frank Praznik Date: Thu, 20 Feb 2014 16:36:00 +0000 (-0500) Subject: HID: sony: Fix multi-line comment styling X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=ad142b9e44efe4b6faa2553fd1e4d0e3a70619f8;p=deliverable%2Flinux.git HID: sony: Fix multi-line comment styling Convert multi-line comments to comply with the kernel coding style. Signed-off-by: Frank Praznik Reviewed-by: David Herrmann Signed-off-by: Jiri Kosina --- diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c index 526705fac82c..26992e15d0e2 100644 --- a/drivers/hid/hid-sony.c +++ b/drivers/hid/hid-sony.c @@ -17,7 +17,8 @@ * any later version. */ -/* NOTE: in order for the Sony PS3 BD Remote Control to be found by +/* + * NOTE: in order for the Sony PS3 BD Remote Control to be found by * a Bluetooth host, the key combination Start+Enter has to be kept pressed * for about 7 seconds with the Bluetooth Host Controller in discovering mode. * @@ -81,7 +82,8 @@ static const u8 sixaxis_rdesc_fixup2[] = { 0xb1, 0x02, 0xc0, 0xc0, }; -/* The default descriptor doesn't provide mapping for the accelerometers +/* + * The default descriptor doesn't provide mapping for the accelerometers * or orientation sensors. This fixed descriptor maps the accelerometers * to usage values 0x40, 0x41 and 0x42 and maps the orientation sensors * to usage values 0x43, 0x44 and 0x45. @@ -340,7 +342,8 @@ static u8 dualshock4_usb_rdesc[] = { 0xC0 /* End Collection */ }; -/* The default behavior of the Dualshock 4 is to send reports using report +/* + * The default behavior of the Dualshock 4 is to send reports using report * type 1 when running over Bluetooth. However, as soon as it receives a * report of type 17 to set the LEDs or rumble it starts returning it's state * in report 17 instead of 1. Since report 17 is undefined in the default HID @@ -667,7 +670,8 @@ static const unsigned int ps3remote_keymap_remote_buttons[] = { }; static const unsigned int buzz_keymap[] = { - /* The controller has 4 remote buzzers, each with one LED and 5 + /* + * The controller has 4 remote buzzers, each with one LED and 5 * buttons. * * We use the mapping chosen by the controller, which is: @@ -838,7 +842,8 @@ static void sixaxis_parse_report(struct sony_sc *sc, __u8 *rd, int size) unsigned long flags; __u8 cable_state, battery_capacity, battery_charging; - /* The sixaxis is charging if the battery value is 0xee + /* + * The sixaxis is charging if the battery value is 0xee * and it is fully charged if the value is 0xef. * It does not report the actual level while charging so it * is set to 100% while charging is in progress. @@ -868,18 +873,21 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size) int n, offset; __u8 cable_state, battery_capacity, battery_charging; - /* Battery and touchpad data starts at byte 30 in the USB report and + /* + * Battery and touchpad data starts at byte 30 in the USB report and * 32 in Bluetooth report. */ offset = (sc->quirks & DUALSHOCK4_CONTROLLER_USB) ? 30 : 32; - /* The lower 4 bits of byte 30 contain the battery level + /* + * The lower 4 bits of byte 30 contain the battery level * and the 5th bit contains the USB cable state. */ cable_state = (rd[offset] >> 4) & 0x01; battery_capacity = rd[offset] & 0x0F; - /* When a USB power source is connected the battery level ranges from + /* + * When a USB power source is connected the battery level ranges from * 0 to 10, and when running on battery power it ranges from 0 to 9. * A battery level above 10 when plugged in means charge completed. */ @@ -903,7 +911,8 @@ static void dualshock4_parse_report(struct sony_sc *sc, __u8 *rd, int size) offset += 5; - /* The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB + /* + * The Dualshock 4 multi-touch trackpad data starts at offset 35 on USB * and 37 on Bluetooth. * The first 7 bits of the first byte is a counter and bit 8 is a touch * indicator that is 0 when pressed and 1 when not pressed. @@ -932,7 +941,8 @@ static int sony_raw_event(struct hid_device *hdev, struct hid_report *report, { struct sony_sc *sc = hid_get_drvdata(hdev); - /* Sixaxis HID report has acclerometers/gyro with MSByte first, this + /* + * Sixaxis HID report has acclerometers/gyro with MSByte first, this * has to be BYTE_SWAPPED before passing up to joystick interface */ if ((sc->quirks & SIXAXIS_CONTROLLER) && rd[0] == 0x01 && size == 49) { @@ -1057,7 +1067,8 @@ static int sixaxis_set_operational_bt(struct hid_device *hdev) HID_FEATURE_REPORT); } -/* Requesting feature report 0x02 in Bluetooth mode changes the state of the +/* + * Requesting feature report 0x02 in Bluetooth mode changes the state of the * controller so that it sends full input reports of type 0x11. */ static int dualshock4_set_operational_bt(struct hid_device *hdev) @@ -1211,9 +1222,11 @@ static int sony_leds_init(struct hid_device *hdev) name_fmt = "%s::sony%d"; } - /* Clear LEDs as we have no way of reading their initial state. This is + /* + * Clear LEDs as we have no way of reading their initial state. This is * only relevant if the driver is loaded after somebody actively set the - * LEDs to on */ + * LEDs to on + */ sony_set_leds(hdev, initial_values, drv_data->led_count); name_sz = strlen(dev_name(&hdev->dev)) + name_len + 1; @@ -1420,7 +1433,8 @@ static int sony_battery_probe(struct sony_sc *sc) struct hid_device *hdev = sc->hdev; int ret; - /* Set the default battery level to 100% to avoid low battery warnings + /* + * Set the default battery level to 100% to avoid low battery warnings * if the battery is polled before the first device report is received. */ sc->battery_capacity = 100; @@ -1533,7 +1547,8 @@ static int sony_probe(struct hid_device *hdev, const struct hid_device_id *id) goto err_stop; } } - /* The Dualshock 4 touchpad supports 2 touches and has a + /* + * The Dualshock 4 touchpad supports 2 touches and has a * resolution of 1920x940. */ ret = sony_register_touchpad(sc, 2, 1920, 940);