From: Oliver Stäbler Date: Wed, 9 Dec 2015 09:24:04 +0000 (+0100) Subject: iio:adc128s052: add support for adc124s021 X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=b41fa86b67bd338d4ffa0b69f0fb1c3013a489e0;p=deliverable%2Flinux.git iio:adc128s052: add support for adc124s021 Signed-off-by: Oliver Stäbler Reviewed-by: Martin Kepplinger Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt index 15ca6b47958e..daa2b2c29428 100644 --- a/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt +++ b/Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt @@ -1,7 +1,7 @@ -* Texas Instruments' ADC128S052 and ADC122S021 ADC chip +* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip Required properties: - - compatible: Should be "ti,adc128s052" or "ti,adc122s021" + - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021" - reg: spi chip select number for the device - vref-supply: The regulator supply for ADC reference voltage diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 9162dfefff30..57e3ca0b7ff4 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -332,11 +332,11 @@ config TI_ADC081C called ti-adc081c. config TI_ADC128S052 - tristate "Texas Instruments ADC128S052/ADC122S021" + tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI help - If you say yes here you get support for Texas Instruments ADC128S052 - and ADC122S021 chips. + If you say yes here you get support for Texas Instruments ADC128S052, + ADC122S021 and ADC124S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c index ff6f7f63c8d9..bc58867d6e8d 100644 --- a/drivers/iio/adc/ti-adc128s052.c +++ b/drivers/iio/adc/ti-adc128s052.c @@ -1,10 +1,11 @@ /* * Copyright (C) 2014 Angelo Compagnucci * - * Driver for Texas Instruments' ADC128S052 and ADC122S021 ADC chip. + * Driver for Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip. * Datasheets can be found here: * http://www.ti.com/lit/ds/symlink/adc128s052.pdf * http://www.ti.com/lit/ds/symlink/adc122s021.pdf + * http://www.ti.com/lit/ds/symlink/adc124s021.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -114,9 +115,17 @@ static const struct iio_chan_spec adc122s021_channels[] = { ADC128_VOLTAGE_CHANNEL(1), }; +static const struct iio_chan_spec adc124s021_channels[] = { + ADC128_VOLTAGE_CHANNEL(0), + ADC128_VOLTAGE_CHANNEL(1), + ADC128_VOLTAGE_CHANNEL(2), + ADC128_VOLTAGE_CHANNEL(3), +}; + static const struct adc128_configuration adc128_config[] = { { adc128s052_channels, ARRAY_SIZE(adc128s052_channels) }, { adc122s021_channels, ARRAY_SIZE(adc122s021_channels) }, + { adc124s021_channels, ARRAY_SIZE(adc124s021_channels) }, }; static const struct iio_info adc128_info = { @@ -177,6 +186,7 @@ static int adc128_remove(struct spi_device *spi) static const struct of_device_id adc128_of_match[] = { { .compatible = "ti,adc128s052", }, { .compatible = "ti,adc122s021", }, + { .compatible = "ti,adc124s021", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, adc128_of_match); @@ -184,6 +194,7 @@ MODULE_DEVICE_TABLE(of, adc128_of_match); static const struct spi_device_id adc128_id[] = { { "adc128s052", 0}, /* index into adc128_config */ { "adc122s021", 1}, + { "adc124s021", 2}, { } }; MODULE_DEVICE_TABLE(spi, adc128_id);