From: Gustavo Zacarias <gustavo@zacarias.com.ar>
Date: Wed, 23 May 2012 14:35:18 +0000 (-0300)
Subject: powerpc/p1010rdb: add EEPROMs to device tree
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=babb5e8d475f512c44c08cb2804a2b961551d211;p=deliverable%2Flinux.git

powerpc/p1010rdb: add EEPROMs to device tree

Add EEPROM to the P1010RDB device tree.
The 24c01 acts as a memory SPD so it shouldn't be overwritten without
care.
The 24c256 is a general purpose memory.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---

diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi
index 49776143a1b8..ec7c27a64671 100644
--- a/arch/powerpc/boot/dts/p1010rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1010rdb.dtsi
@@ -126,12 +126,24 @@
 
 &board_soc {
 	i2c@3000 {
+		eeprom@50 {
+			compatible = "st,24c256";
+			reg = <0x50>;
+		};
+
 		rtc@68 {
 			compatible = "pericom,pt7c4338";
 			reg = <0x68>;
 		};
 	};
 
+	i2c@3100 {
+		eeprom@52 {
+			compatible = "atmel,24c01";
+			reg = <0x52>;
+		};
+	};
+
 	spi@7000 {
 		flash@0 {
 			#address-cells = <1>;