From: Takeshi Kihara Date: Wed, 29 Apr 2015 17:03:51 +0000 (+0900) Subject: mmc: sh_mmcif: Fix timeout value for command request X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=bad4371d87d1d1ed1aecd9c9cc21c41ac3f289c8;p=deliverable%2Flinux.git mmc: sh_mmcif: Fix timeout value for command request f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by: Takeshi Kihara [horms: rewrote changelog to refer to HZ] Signed-off-by: Simon Horman Signed-off-by: Yoshihiro Kaneko Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 2b6ef6bd5d5f..7eff087cf515 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1408,7 +1408,7 @@ static int sh_mmcif_probe(struct platform_device *pdev) host = mmc_priv(mmc); host->mmc = mmc; host->addr = reg; - host->timeout = msecs_to_jiffies(1000); + host->timeout = msecs_to_jiffies(10000); host->ccs_enable = !pd || !pd->ccs_unsupported; host->clk_ctrl2_enable = pd && pd->clk_ctrl2_present;