From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Date: Thu, 16 Jul 2015 19:08:24 +0000 (+0200)
Subject: dt-bindings: gpio: document bindings supported by gpio-mpc8xxx.c
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=bb379ceb8d9f3599ab9162ebf58d731350f4177a;p=deliverable%2Flinux.git

dt-bindings: gpio: document bindings supported by gpio-mpc8xxx.c

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
new file mode 100644
index 000000000000..805ddcd79a57
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -0,0 +1,22 @@
+* Freescale MPC512x/MPC8xxx GPIO controller
+
+Required properties:
+- compatible : Should be "fsl,<soc>-gpio"
+  The following <soc>s are known to be supported:
+    mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq
+- reg : Address and length of the register set for the device
+- interrupts : Should be the port interrupt shared by all 32 pins.
+- #gpio-cells : Should be two.  The first cell is the pin number and
+  the second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+
+Example:
+
+gpio0: gpio@1100 {
+	compatible = "fsl,mpc5125-gpio";
+	#gpio-cells = <2>;
+	reg = <0x1100 0x080>;
+	interrupts = <78 0x8>;
+	status = "okay";
+};