From: Michael Roth Date: Thu, 11 Jun 2009 06:30:55 +0000 (-0700) Subject: Input: ads7846 - pin change interrupt support X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=c57c0a2a0d019aa8108f1155f99098ea7e7e1ab3;p=deliverable%2Flinux.git Input: ads7846 - pin change interrupt support Some SoCs support only pin change interrupts on GPIO pins used as irq lines. The ads7846 core is not affected from the additional irqs on the rising edge because the code accounts touch bounce anyway by kicking in a timer and disabling the irq after the first request and reenabling the irq after a timeout when there is no longer pen down detected. Signed-off-by: Michael Roth Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 90f792c17ab3..ba9d38c3f412 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1150,9 +1150,15 @@ static int __devinit ads7846_probe(struct spi_device *spi) if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING, spi->dev.driver->name, ts)) { - dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); - err = -EBUSY; - goto err_free_gpio; + dev_info(&spi->dev, + "trying pin change workaround on irq %d\n", spi->irq); + err = request_irq(spi->irq, ads7846_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + spi->dev.driver->name, ts); + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_free_gpio; + } } err = ads784x_hwmon_register(spi, ts);