From: Michael Grzeschik <m.grzeschik@pengutronix.de>
Date: Fri, 6 Dec 2013 14:56:40 +0000 (+0100)
Subject: ARM: i.MX28: dts: rename usbphy pin names
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=c8e42bc94894bdee1277f5d50b5e4702b8e81e8c;p=deliverable%2Flinux.git

ARM: i.MX28: dts: rename usbphy pin names

The pins have nothing todo with the phy layer. We better rename them, so
it gets clear they are routed to the ehci core not to any phy.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index 6729872ffe9a..e5beaa58bb40 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -54,7 +54,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 093fd7b69a48..7d51459de5e8 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -298,7 +298,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 1ebd44edaf8d..c4e00ce4b6da 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -134,7 +134,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index a4f0acb93437..7c9cc783f0d1 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -101,7 +101,7 @@
 	ahb@80080000 {
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			pinctrl-names = "default";
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index d6e71ed3147b..15f3b39716e8 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -180,7 +180,7 @@
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			disable-over-current;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e6d0fa69973e..8536b0db9018 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -248,14 +248,14 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_a>;
+			pinctrl-0 = <&usb0_pins_a>;
 			status = "okay";
 		};
 
 		usb1: usb@80090000 {
 			vbus-supply = <&reg_usb1_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-0 = <&usb1_pins_a>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 2612a01e8da9..0ce3cb8e7914 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -106,7 +106,7 @@
 		usb0: usb@80080000 {
 			vbus-supply = <&reg_usb0_vbus>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&usbphy0_pins_b>;
+			pinctrl-0 = <&usb0_pins_b>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index df783c2648a9..f7deccd60eaa 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -783,7 +783,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_a: usbphy0@0 {
+				usb0_pins_a: usb0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
@@ -793,7 +793,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy0_pins_b: usbphy0@1 {
+				usb0_pins_b: usb0@1 {
 					reg = <1>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
@@ -803,7 +803,7 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				usbphy1_pins_a: usbphy1@0 {
+				usb1_pins_a: usb1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT