From: Luis R. Rodriguez Date: Tue, 19 Jan 2010 19:04:19 +0000 (-0500) Subject: ath9k: make tx power config changes take effect immediatley X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=c9f6a6567f3e8dd69dd3f80a67e73d7d10884bea;p=deliverable%2Flinux.git ath9k: make tx power config changes take effect immediatley Users wishing to tweak tx power want it to happen immediately, try to respect that. This was tested by Lorenzo by measuring the received signal strength from an AP with ath9k and the patch. Changing the tx power on the AP produced these results: 1) iwconfig wlan0 txpower 20 ---> Rx power -37dbm 2) iwconfig wlan0 txpower 15 ---> Rx power -41dbm 3) iwconfig wlan0 txpower 10 ---> Rx power -45dbm 4) iwconfig wlan0 txpower 5 ---> Rx power -51dbm 5) iwconfig wlan0 txpower 0 ---> Rx power -37dbm The result with 0 is an anomoly and would need to be addressed through a separate patch. Signed-off-by: Luis R. Rodriguez Tested-by: Lorenzo Bianconi Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index c0c571c2e8c4..6f3e71c5071e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1624,8 +1624,10 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) } skip_chan_change: - if (changed & IEEE80211_CONF_CHANGE_POWER) + if (changed & IEEE80211_CONF_CHANGE_POWER) { sc->config.txpowlimit = 2 * conf->power_level; + ath_update_txpow(sc); + } spin_lock_bh(&sc->wiphy_lock); disable_radio = ath9k_all_wiphys_idle(sc);