From: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Wed, 10 Jul 2013 10:09:47 +0000 (+0200)
Subject: DMA: shdma: support the new CHCLR register layout
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=ca8b387803072a16baf6d8090591b10bfdf4e253;p=deliverable%2Flinux.git

DMA: shdma: support the new CHCLR register layout

On newer r-car SoCs the CHCLR register only contains one bit per channel,
to which a 1 has to be written to reset the channel. Older SoC versions had
one CHCLR register per channel, to which a 0 must be written to reset the
channel and clear its buffers. This patch adds support for the newer
layout.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
---

diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c
index 9ee1272604b4..53bd6308fc2f 100644
--- a/drivers/dma/sh/shdma.c
+++ b/drivers/dma/sh/shdma.c
@@ -49,12 +49,22 @@
 static DEFINE_SPINLOCK(sh_dmae_lock);
 static LIST_HEAD(sh_dmae_devices);
 
+/*
+ * Different DMAC implementations provide different ways to clear DMA channels:
+ * (1) none - no CHCLR registers are available
+ * (2) one CHCLR register per channel - 0 has to be written to it to clear
+ *     channel buffers
+ * (3) one CHCLR per several channels - 1 has to be written to the bit,
+ *     corresponding to the specific channel to reset it
+ */
 static void channel_clear(struct sh_dmae_chan *sh_dc)
 {
 	struct sh_dmae_device *shdev = to_sh_dev(sh_dc);
+	const struct sh_dmae_channel *chan_pdata = shdev->pdata->channel +
+		sh_dc->shdma_chan.id;
+	u32 val = shdev->pdata->chclr_bitwise ? 1 << chan_pdata->chclr_bit : 0;
 
-	__raw_writel(0, shdev->chan_reg +
-		shdev->pdata->channel[sh_dc->shdma_chan.id].chclr_offset);
+	__raw_writel(val, shdev->chan_reg + chan_pdata->chclr_offset);
 }
 
 static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
diff --git a/include/linux/sh_dma.h b/include/linux/sh_dma.h
index 4e83f3e034f3..776ed9d682f4 100644
--- a/include/linux/sh_dma.h
+++ b/include/linux/sh_dma.h
@@ -33,13 +33,44 @@ struct sh_dmae_slave_config {
 	char		mid_rid;
 };
 
+/**
+ * struct sh_dmae_channel - DMAC channel platform data
+ * @offset:		register offset within the main IOMEM resource
+ * @dmars:		channel DMARS register offset
+ * @chclr_offset:	channel CHCLR register offset
+ * @dmars_bit:		channel DMARS field offset within the register
+ * @chclr_bit:		bit position, to be set to reset the channel
+ */
 struct sh_dmae_channel {
 	unsigned int	offset;
 	unsigned int	dmars;
-	unsigned int	dmars_bit;
 	unsigned int	chclr_offset;
+	unsigned char	dmars_bit;
+	unsigned char	chclr_bit;
 };
 
+/**
+ * struct sh_dmae_pdata - DMAC platform data
+ * @slave:		array of slaves
+ * @slave_num:		number of slaves in the above array
+ * @channel:		array of DMA channels
+ * @channel_num:	number of channels in the above array
+ * @ts_low_shift:	shift of the low part of the TS field
+ * @ts_low_mask:	low TS field mask
+ * @ts_high_shift:	additional shift of the high part of the TS field
+ * @ts_high_mask:	high TS field mask
+ * @ts_shift:		array of Transfer Size shifts, indexed by TS value
+ * @ts_shift_num:	number of shifts in the above array
+ * @dmaor_init:		DMAOR initialisation value
+ * @chcr_offset:	CHCR address offset
+ * @chcr_ie_bit:	CHCR Interrupt Enable bit
+ * @dmaor_is_32bit:	DMAOR is a 32-bit register
+ * @needs_tend_set:	the TEND register has to be set
+ * @no_dmars:		DMAC has no DMARS registers
+ * @chclr_present:	DMAC has one or several CHCLR registers
+ * @chclr_bitwise:	channel CHCLR registers are bitwise
+ * @slave_only:		DMAC cannot be used for MEMCPY
+ */
 struct sh_dmae_pdata {
 	const struct sh_dmae_slave_config *slave;
 	int slave_num;
@@ -59,6 +90,7 @@ struct sh_dmae_pdata {
 	unsigned int needs_tend_set:1;
 	unsigned int no_dmars:1;
 	unsigned int chclr_present:1;
+	unsigned int chclr_bitwise:1;
 	unsigned int slave_only:1;
 };