From: Sascha Hauer Date: Fri, 22 Jan 2016 12:39:25 +0000 (+0100) Subject: soc: mediatek: SCPSYS: Fix double enabling of regulators X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=cc8ed76938b5;p=deliverable%2Flinux.git soc: mediatek: SCPSYS: Fix double enabling of regulators With CONFIG_PM enabled do not call genpd->power_on manually as this will cause the regulators being turned on once in SCPSYS probe and then again when the genpd core turns on the domains. Instead, call genpd->power_on only with CONFIG_PM disabled and tell the genpd core that the domains are disabled when registered. Signed-off-by: Sascha Hauer Tested-by: Daniel Kurtz Reviewed-by: Daniel Kurtz Signed-off-by: Matthias Brugger --- diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c index 837effe19907..57e781c71e67 100644 --- a/drivers/soc/mediatek/mtk-scpsys.c +++ b/drivers/soc/mediatek/mtk-scpsys.c @@ -491,14 +491,13 @@ static int scpsys_probe(struct platform_device *pdev) genpd->dev_ops.active_wakeup = scpsys_active_wakeup; /* - * Initially turn on all domains to make the domains usable - * with !CONFIG_PM and to get the hardware in sync with the - * software. The unused domains will be switched off during - * late_init time. + * With CONFIG_PM disabled turn on all domains to make the + * hardware usable. */ - genpd->power_on(genpd); + if (!IS_ENABLED(CONFIG_PM)) + genpd->power_on(genpd); - pm_genpd_init(genpd, NULL, false); + pm_genpd_init(genpd, NULL, true); } /*