From: Steve Chamberlain Date: Thu, 12 Dec 1991 03:27:33 +0000 (+0000) Subject: Initial revision X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=ccdbfbdcd1996a8820b0ddf7e2cabe2a5189807f;p=deliverable%2Fbinutils-gdb.git Initial revision --- diff --git a/gas/configdos.bat b/gas/configdos.bat new file mode 100755 index 0000000000..18331cd3da --- /dev/null +++ b/gas/configdos.bat @@ -0,0 +1,14 @@ +@echo off +echo Configuring GAS for H8/300 + +copy config\ho-go32.h host.h +copy config\tc-h8300.c targ-cpu.c +copy config\tc-h8300.h targ-cpu.h +copy config\te-generic.h targ-env.h +copy config\objcoff-bfd.h obj-format.h +copy config\objcoff-bfd.c obj-format.c +copy config\atof-ieee.c atof-targ.c + +copy Makefile.dos Makefile + + diff --git a/gas/makefile.dos b/gas/makefile.dos new file mode 100755 index 0000000000..c146e197f3 --- /dev/null +++ b/gas/makefile.dos @@ -0,0 +1,593 @@ +# Makefile for GNU Assembler +# Copyright (C) 1987, 1988, 1990, 1991 Free Software Foundation, Inc. + +#This file is part of GNU GAS. + +#GNU GAS is free software; you can redistribute it and/or modify +#it under the terms of the GNU General Public License as published by +#the Free Software Foundation; either version 1, or (at your option) +#any later version. + +#GNU GAS is distributed in the hope that it will be useful, +#but WITHOUT ANY WARRANTY; without even the implied warranty of +#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#GNU General Public License for more details. + +#You should have received a copy of the GNU General Public License +#along with GNU GAS; see the file COPYING. If not, write to +#the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + +# $Id$ + +# The targets for external use include: +# all, doc, proto, install, uninstall, includes, TAGS, +# clean, cleanconfig, realclean, stage1, stage2, stage3, stage4. + +# Variables that exist for you to override. +# See below for how to change them for certain systems. + +LIBDEPS= +CROSS= +HDEFINES= +CPPFLAGS= + +ALLOCA = +CFLAGS = -g -D__MSDOS__ -D__GO32__ -I../include +INTERNAL_CFLAGS = $(CROSS) +OLDCC = cc +BISON = bison +BISONFLAGS = -v +AR = ar +OLDAR_FLAGS = qc +AR_FLAGS = rc +SHELL = /bin/sh +# on sysV, define this as cp. +INSTALL = install -c +# These permit overriding just for certain files. +INSTALL_PROGRAM = $(INSTALL) +INSTALL_FILE = $(INSTALL) + +# Define this as & to perform parallel make on a Sequent. +# Note that this has some bugs, and it seems currently necessary +# to compile all the gen* files first by hand to avoid erroneous results. +P = + +# How to invoke ranlib. +RANLIB = ranlib +# Test to use to see whether ranlib exists on the system. +RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ] + +# CFLAGS for use with OLDCC, for compiling gnulib. +# NOTE: -O does not work on some Unix systems! +CCLIBFLAGS = -O + +# Version of ar to use when compiling gnulib. +OLDAR = ar + +version=`$(unsubdir)/../gcc$(subdir)/gcc -dumpversion` + +# Directory where sources are, from where we are. +srcdir = . +# Common prefix for installation directories. +# NOTE: This directory must exist when you start installation. +ddestdir = /usr/local +# Directory in which to put the executable for the command `gcc' +bindir = $(ddestdir)/bin +# Directory in which to put the directories used by the compiler. +libdir = $(ddestdir)/lib +# Directory in which the compiler finds executables, libraries, etc. +libsubdir = $(libdir)/gcc/$(target_alias)/$(version) +# Number to put in man-page filename. +manext = 1 +# Directory in which to put man pages. +mandir = $(destdir)/H-independent/man/man$(manext) + +# Additional system libraries to link with. +CLIB= + +# Specify the rule for actually making gnulib. +GNULIB = gnulib.portable + +# Specify the rule for actually making gnulib2. +GNULIB2 = gnulib2.portable + +# List of extra C and assembler files to add to gnulib. +# Assembler files should have names ending in `.asm'. +LIBFUNCS_EXTRA = + +# Program to convert libraries. +LIBCONVERT = + +# Control whether header files are installed. +INSTALL_HEADERS=install-headers + +# Change this to empty to prevent installing limits.h +LIMITS_H = limits.h + +# Directory to link to, when using the target `maketest'. +DIR = ../gcc + +# For better debugging under COFF, define SEPARATE_AUX_OUTPUT in config.h +# and define the following variable as `aux-output2.c' in make-... +AUX_OUTPUT2 = + +# Flags to use when cross-building GCC. +# Prefix to apply to names of object files when using them +# to run on the machine we are compiling on. +HOST_PREFIX= +# Prefix to apply to names of object files when compiling them +# to run on the machine we are compiling on. +# The default for this variable is chosen to keep these rules +# out of the way of the other rules for compiling the same source files. +HOST_PREFIX_1=loser- +HOST_CC=$(CC) +HOST_CFLAGS=$(ALL_CFLAGS) +HOST_LDFLAGS=$(LDFLAGS) +HOST_CPPFLAGS=$(CPPFLAGS) + +# Choose the real default target. +ALL=as.new + +# End of variables for you to override. + +# Lists of files for various purposes. + +REAL_SOURCES = \ + app.c \ + as.c \ + atof-generic.c \ + bignum-copy.c \ + cond.c \ + expr.c \ + fn-const.c \ + fn-copy.c \ + flonum-mult.c \ + frags.c \ + hash.c \ + hex-value.c \ + input-file.c \ + input-scrub.c \ + messages.c \ + output-file.c \ + read.c \ + strstr.c \ + subsegs.c \ + symbols.c \ + version.c \ + write.c \ + xmalloc.c \ + xrealloc.c + +# in an expedient order +LINKED_SOURCES = \ + targ-cpu.c \ + obj-format.c \ + atof-targ.c + +SOURCES = $(LINKED_SOURCES) $(REAL_SOURCES) + +REAL_HEADERS = \ + as.h \ + bignum.h \ + expr.h \ + flonum.h \ + frags.h \ + hash.h \ + input-file.h \ + tc.h \ + obj.h \ + read.h \ + struc-symbol.h \ + subsegs.h \ + symbols.h \ + syscalls.h \ + write.h + +LINKED_HEADERS = \ + a.out.gnu.h \ + a.out.h \ + host.h \ + targ-env.h \ + targ-cpu.h \ + obj-format.h \ + atof-targ.h + +HEADERS = $(LINKED_HEADERS) $(REAL_HEADERS) + +OBJS = \ + targ-cpu.o \ + obj-format.o \ + atof-targ.o \ + app.o \ + as.o \ + atof-generic.o \ + bignum-copy.o \ + cond.o \ + expr.o \ + fn-const.o \ + fn-copy.o \ + flonum-mult.o \ + frags.o \ + hash.o \ + hex-value.o \ + input-file.o \ + input-scrub.o \ + messages.o \ + output-file.o \ + read.o \ + strstr.o \ + subsegs.o \ + symbols.o \ + version.o \ + write.o \ + xmalloc.o \ + xrealloc.o + +#### host, target, and site specific Makefile frags come in here. +TARG_CPU_DEPENDENTS=../include/h8300-opcode.h +LOCAL_LOADLIBES=../bfd/libbfd.a +TDEFINES=-DBFD -DBFD_HEADERS -DMANY_SEGMENTS + + +# Definition of `all' is here so that new rules inserted by sed +# do not specify the default target. +# The real definition is under `all.internal'. + +all: $(ALL) +all-info: +install-info: + +fake-as: force + - rm -f ./as.new + cp /bin/as ./fake-as + +# Now figure out from those variables how to compile and link. + +# This is the variable actually used when we compile. +ALL_CFLAGS = $(INTERNAL_CFLAGS) $(CFLAGS) $(HDEFINES) $(TDEFINES) + +# Even if ALLOCA is set, don't use it if compiling with GCC. +USE_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${ALLOCA}; else true; fi` +USE_HOST_ALLOCA= `if [ x"${CC}" = x"${OLDCC}" ] ; then echo ${HOST_PREFIX}${ALLOCA}; else true; fi` + +# Likewise, for use in the tools that must run on this machine +# even if we are cross-building GCC. +# We don't use USE_ALLOCA because backquote expansion doesn't work in deps. +HOST_LIBDEPS= $(HOST_PREFIX)$(OBSTACK) $(HOST_PREFIX)$(ALLOCA) $(HOST_PREFIX)$(MALLOC) + +# How to link with both our special library facilities +# and the system's installed libraries. + +LIBS = $(LOCAL_LOADLIBES) $(CLIB) $(unsubdir)/../libiberty$(subdir)/libiberty.a + +# Likewise, for use in the tools that must run on this machine +# even if we are cross-building GCC. +HOST_LIBS = $(HOST_PREFIX)$(OBSTACK) $(USE_HOST_ALLOCA) $(HOST_PREFIX)$(MALLOC) $(CLIB) + +# Specify the directories to be searched for header files. +# Both . and srcdir are used, in that order, +# so that tm.h and config.h will be found in the compilation +# subdirectory rather than in the source directory. +INCLUDES = -I. -I$(srcdir) -Iconfig +SUBDIR_INCLUDES = -I.. -I../$(srcdir) -I../config + +# Always use -Iconfig when compiling. +.c.o: + $(CC) -c $(ALL_CFLAGS) $(CPPFLAGS) $(INCLUDES) $< + +# This tells GNU make version 3 not to export all the variables +# defined in this file into the environment. +.NOEXPORT: + +# Files to be copied away after each stage in building. +STAGE_GCC=gcc +STAGESTUFF = *.o as.new + +# The files that "belong" in CONFIG_H are deliberately omitted +# because having them there would not be useful in actual practice. +# All they would do is cause complete recompilation every time +# one of the machine description files is edited. +# That may or may not be what one wants to do. +# If it is, rm *.o is an easy way to do it. +# CONFIG_H = config.h tm.h +CONFIG_H = + +as.new: $(OBJS) $(LIBDEPS) + -mv -f as.new as.old + >as.rf $(ALL_CFLAGS) $(LDFLAGS) -o as.new $(OBJS) $(LIBS) $(LOADLIBES) + $(CC) @as.rf + +objdump: + +all.internal: native +# This is what is made with the host's compiler if making a cross assembler. +native: config.status as + +config.status: + @echo You must configure gas. Look at the INSTALL file for details. + @false + +compilations: ${OBJS} + +# Compiling object files from source files. + +app.o : app.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +as.o : as.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +atof-generic.o : atof-generic.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +bignum-copy.o : bignum-copy.c as.h host.h \ + targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +cond.o : cond.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + +debug.o : debug.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + subsegs.h +expr.o : expr.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + +fn-const.o : fn-const.c flonum.h bignum.h +fn-copy.o : fn-copy.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +flonum-mult.o : flonum-mult.c flonum.h bignum.h +frags.o : frags.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + subsegs.h +hash.o : hash.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +hex-value.o : hex-value.c +input-file.o : input-file.c as.h host.h \ + targ-env.h obj-format.h targ-cpu.h \ + struc-symbol.h write.h flonum.h bignum.h expr.h \ + frags.h hash.h read.h symbols.h tc.h obj.h input-file.h +input-scrub.o : input-scrub.c \ + as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + input-file.h +messages.o : messages.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h +obstack.o : obstack.c +output-file.o : output-file.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + output-file.h +read.o : read.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + +strstr.o : strstr.c +subsegs.o : subsegs.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + subsegs.h +symbols.o : symbols.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + subsegs.h +version.o : version.c +write.o : write.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h symbols.h tc.h obj.h \ + subsegs.h output-file.h +xmalloc.o : xmalloc.c +xrealloc.o : xrealloc.c +atof-targ.o : atof-targ.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h \ + symbols.h tc.h obj.h +obj-format.o : obj-format.c as.h host.h targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h \ + symbols.h tc.h obj.h +targ-cpu.o : targ-cpu.c targ-env.h obj-format.h \ + targ-cpu.h struc-symbol.h \ + write.h flonum.h bignum.h expr.h frags.h hash.h read.h \ + symbols.h tc.h obj.h $(TARG_CPU_DEPENDENTS) + + +# Compile the libraries to be used by gen*. +# If we are not cross-building, gen* use the same .o's that cc1 will use, +# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict +# with the rules for rtl.o, alloca.o, etc. +$(HOST_PREFIX_1)alloca.o: alloca.c + rm -f $(HOST_PREFIX)alloca.c + cp alloca.c $(HOST_PREFIX)alloca.c + $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c + +$(HOST_PREFIX_1)obstack.o: obstack.c + rm -f $(HOST_PREFIX)obstack.c + cp obstack.c $(HOST_PREFIX)obstack.c + $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c + +$(HOST_PREFIX_1)malloc.o: malloc.c + rm -f $(HOST_PREFIX)malloc.c + cp malloc.c $(HOST_PREFIX)malloc.c + $(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c + +# Remake the info files. + +doc: as.info + +as.info: doc/as.texinfo + (cd doc; make as.info; mv as.info $srcdir) + + +# Deletion of files made during compilation. +# There are three levels of this: `clean', `cleanconfig' and `realclean'. +# `clean' deletes what you want to delete ordinarily to save space. +# This is most, but not all, of the files made by compilation. +# `cleanconfig' also deletes everything depending +# on the choice of config files. +# `realclean' also deletes everything that could be regenerated automatically. + +clean: + -rm -f $(STAGESTUFF) +# Delete the temporary source copies for cross compilation. + -rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c + -rm -f $(HOST_PREFIX_1)obstack.c +# Delete the stamp files except stamp-gnulib2. + -rm -f core + +# Like clean but also delete the links made to configure gas. +cleanconfig: clean + -rm -f config.status Makefile host.h targ-env.h + -rm -f targ-cpu.h targ-cpu.c + -rm -f obj-format.h obj-format.c + -rm -f atof-targ.c + +# Get rid of every file that's generated from some other file (except INSTALL). +realclean: cleanconfig + -rm -f gas.aux gas.cps gas.fns gas.info gas.kys gas.pgs gas.tps gas.vrs + -rm -f TAGS + -rm -f gas.info* gas.?? gas.??s gas.log gas.toc gas.*aux + -rm -f *.dvi + +# Entry points `install', `includes' and `uninstall'. + +# Copy the files into directories where they will be run. +install: $(ALL) + $(INSTALL_PROGRAM) $(ALL) $(libsubdir)/as +# cp $(ALL) $(bindir)/as.new +# mv -f $(bindir)/as.new $(bindir)/as + +# Create the installation directory. +install-dir: + -mkdir $(libdir) + -mkdir $(libdir)/gcc + -mkdir $(libdir)/gcc/$(target) + -mkdir $(libdir)/gcc/$(target)/$(version) + +# Install the compiler executables built during cross compilation. +install-cross: native install-dir + -if [ -f cc1 ] ; then $(INSTALL_PROGRAM) cc1 $(libsubdir)/cc1; else true; fi + -if [ -f cc1plus ] ; then $(INSTALL_PROGRAM) cc1plus $(libsubdir)/cc1plus; else true; fi + $(INSTALL_PROGRAM) cpp $(libsubdir)/cpp + ./gcc -dumpspecs > $(libsubdir)/specs + $(INSTALL_PROGRAM) gcc $(bindir)/gcc + +# Install the man pages. +install-man: install-dir gcc.1 protoize.1 unprotoize.1 + $(INSTALL_FILE) gcc.1 $(mandir)/gcc.$(manext) + chmod a-x $(mandir)/gcc.$(manext) + $(INSTALL_FILE) protoize.1 $(mandir)/protoize.$(manext) + chmod a-x $(mandir)/protoize.$(manext) + $(INSTALL_FILE) unprotoize.1 $(mandir)/unprotoize.$(manext) + chmod a-x $(mandir)/unprotoize.$(manext) + +# Cancel installation by deleting the installed files. +uninstall: + -rm -rf $(libsubdir) + -rm -rf $(bindir)/as + -rm -rf $(mandir)/gas.$(manext) + + +# These exist for maintenance purposes. + +tags TAGS: force + etags $(REAL_SOURCES) $(REAL_HEADERS) README Makefile config/*.[hc] + +bootstrap: $(ALL) force + $(MAKE) stage1 + $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL) + $(MAKE) stage2 + $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL) + $(MAKE) comparison against=stage2 + +bootstrap2: force + $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage1/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL) + $(MAKE) stage2 + $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL) + $(MAKE) comparison against=stage2 + +bootstrap3: force + $(MAKE) CC="$(CC)" CFLAGS="-O -Bstage2/ $(CFLAGS)" libdir=$(libdir) ALLOCA= $(ALL) + $(MAKE) comparison against=stage2 + +# Copy the object files from a particular stage into a subdirectory. +stage1: force + -mkdir stage1 + -mv $(STAGESTUFF) stage1 + if [ -f stage1/as.new -a ! -f stage1/as ] ; then (cd stage1 ; ln -s as.new as) ; fi + +stage2: force + -mkdir stage2 + -mv $(STAGESTUFF) stage2 + if [ -f stage2/as.new -a ! -f stage2/as ] ; then (cd stage2 ; ln -s as.new as) ; fi + +stage3: force + -mkdir stage3 + -mv $(STAGESTUFF) stage3 + if [ -f stage3/as.new -a ! -f stage3/as ] ; then (cd stage3 ; ln -s as.new as) ; fi + +against=stage2 + +comparison: force + for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done + +de-stage1: force + - (cd stage1 ; rm as ; mv -f * ..) + - rmdir stage1 + +de-stage2: force + - (cd stage2 ; rm as ; mv -f * ..) + - rmdir stage2 + +de-stage3: force + - (cd stage3 ; rm as ; mv -f * ..) + - rmdir stage3 + +# Copy just the executable files from a particular stage into a subdirectory, +# and delete the object files. Use this if you're just verifying a version +# that is pretty sure to work, and you are short of disk space. +risky-stage1: force + -mkdir stage1 + -mv cc1 cpp cccp gcc stage1 + -rm -f stage1/gnulib + -cp gnulib stage1 && $(RANLIB) stage1/gnulib + -make clean + +risky-stage2: force + -mkdir stage2 + -mv cc1 cpp cccp gcc stage2 + -rm -f stage2/gnulib + -cp gnulib stage2 && $(RANLIB) stage2/gnulib + -make clean + +risky-stage3: force + -mkdir stage3 + -mv cc1 cpp cccp gcc stage3 + -rm -f stage3/gnulib + -cp gnulib stage3 && $(RANLIB) stage3/gnulib + -make clean + +risky-stage4: force + -mkdir stage4 + -mv cc1 cpp cccp gcc stage4 + -rm -f stage4/gnulib + -cp gnulib stage4 && $(RANLIB) stage4/gnulib + -make clean + +#In GNU Make, ignore whether `stage*' exists. +.PHONY: stage1 stage2 stage3 stage4 clean realclean TAGS bootstrap +.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4 + +force: + +Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) + $(SHELL) ./config.status +