From: Hans de Goede Date: Sat, 30 Jul 2016 14:25:47 +0000 (+0200) Subject: mmc: sunxi: sun4i / sun5i do not have sample clocks X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=d4e1a133c040d72b77c41e4de2e275ed3a8646f1;p=deliverable%2Flinux.git mmc: sunxi: sun4i / sun5i do not have sample clocks It turns out that sun4i (A10) and sun5i (A13 & co) do not have sample clocks, so add a new sun7i-a20-mmc compatible and do not try to use sample clocks on sun4i / sun5i. Since sun4i / sun5i do not have sample clocks, they cannot (reliably) do DDR rates, so only set MMC_CAP_1_8V_DDR when we do have sample clks. Note this patch leaves the clk_prepare_enable() / clk_disable_unprepare() calls to the sample clks as-is, without adding checks for them being NULL. All the clk_foo calls accept a NULL clk and will return success when called with a NULL clk. Signed-off-by: Hans de Goede Acked-by: Maxime Ripard Acked-by: Rob Herring Signed-off-by: Ulf Hansson --- diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 4bf41d833804..904ff9f89893 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -8,7 +8,11 @@ as the speed of SD standard 3.0. Absolute maximum transfer rate is 200MB/s Required properties: - - compatible : "allwinner,sun4i-a10-mmc" or "allwinner,sun5i-a13-mmc" + - compatible : should be one of: + * "allwinner,sun4i-a10-mmc" + * "allwinner,sun5i-a13-mmc" + * "allwinner,sun7i-a20-mmc" + * "allwinner,sun9i-a80-mmc" - reg : mmc controller base registers - clocks : a list with 4 phandle + clock specifier pairs - clock-names : must contain "ahb", "mmc", "output" and "sample" diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index af30d87a56db..2ec91ce1fb0a 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -662,6 +662,9 @@ static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host, { int index; + if (!host->cfg->clk_delays) + return 0; + /* determine delays */ if (rate <= 400000) { index = SDXC_CLK_400K; @@ -978,10 +981,15 @@ static const struct sunxi_mmc_clk_delay sun9i_mmc_clk_delays[] = { static const struct sunxi_mmc_cfg sun4i_a10_cfg = { .idma_des_size_bits = 13, - .clk_delays = sunxi_mmc_clk_delays, + .clk_delays = NULL, }; static const struct sunxi_mmc_cfg sun5i_a13_cfg = { + .idma_des_size_bits = 16, + .clk_delays = NULL, +}; + +static const struct sunxi_mmc_cfg sun7i_a20_cfg = { .idma_des_size_bits = 16, .clk_delays = sunxi_mmc_clk_delays, }; @@ -994,6 +1002,7 @@ static const struct sunxi_mmc_cfg sun9i_a80_cfg = { static const struct of_device_id sunxi_mmc_of_match[] = { { .compatible = "allwinner,sun4i-a10-mmc", .data = &sun4i_a10_cfg }, { .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg }, + { .compatible = "allwinner,sun7i-a20-mmc", .data = &sun7i_a20_cfg }, { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg }, { /* sentinel */ } }; @@ -1032,16 +1041,18 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, return PTR_ERR(host->clk_mmc); } - host->clk_output = devm_clk_get(&pdev->dev, "output"); - if (IS_ERR(host->clk_output)) { - dev_err(&pdev->dev, "Could not get output clock\n"); - return PTR_ERR(host->clk_output); - } + if (host->cfg->clk_delays) { + host->clk_output = devm_clk_get(&pdev->dev, "output"); + if (IS_ERR(host->clk_output)) { + dev_err(&pdev->dev, "Could not get output clock\n"); + return PTR_ERR(host->clk_output); + } - host->clk_sample = devm_clk_get(&pdev->dev, "sample"); - if (IS_ERR(host->clk_sample)) { - dev_err(&pdev->dev, "Could not get sample clock\n"); - return PTR_ERR(host->clk_sample); + host->clk_sample = devm_clk_get(&pdev->dev, "sample"); + if (IS_ERR(host->clk_sample)) { + dev_err(&pdev->dev, "Could not get sample clock\n"); + return PTR_ERR(host->clk_sample); + } } host->reset = devm_reset_control_get_optional(&pdev->dev, "ahb"); @@ -1144,9 +1155,11 @@ static int sunxi_mmc_probe(struct platform_device *pdev) mmc->f_min = 400000; mmc->f_max = 52000000; mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | - MMC_CAP_1_8V_DDR | MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ; + if (host->cfg->clk_delays) + mmc->caps |= MMC_CAP_1_8V_DDR; + ret = mmc_of_parse(mmc); if (ret) goto error_free_dma;