From: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Date: Mon, 17 Mar 2014 09:32:48 +0000 (+0530)
Subject: ath9k: Fix temperature compensation
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=d65b1278e314dc4023a70f338156d7b07941d93a;p=deliverable%2Flinux.git

ath9k: Fix temperature compensation

The registers for temperature compensation need to
be programmed only for active chains. Use the TX chainmask
to make sure that this is done properly for QCA953x.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d7625ecb6387..235053ba7737 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -4792,43 +4792,54 @@ static void ar9003_hw_power_control_override(struct ath_hw *ah,
 
 tempslope:
 	if (AR_SREV_9550(ah) || AR_SREV_9531(ah)) {
+		u8 txmask = (eep->baseEepHeader.txrxMask & 0xf0) >> 4;
+
 		/*
 		 * AR955x has tempSlope register for each chain.
 		 * Check whether temp_compensation feature is enabled or not.
 		 */
 		if (eep->baseEepHeader.featureEnable & 0x1) {
 			if (frequency < 4000) {
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      eep->base_ext2.tempSlopeLow);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      eep->base_ext2.tempSlopeHigh);
+				if (txmask & BIT(0))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      eep->base_ext2.tempSlopeLow);
+				if (txmask & BIT(1))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope);
+				if (txmask & BIT(2))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      eep->base_ext2.tempSlopeHigh);
 			} else {
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope1);
-				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-					      AR_PHY_TPC_19_ALPHA_THERM,
-					      temp_slope2);
+				if (txmask & BIT(0))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope);
+				if (txmask & BIT(1))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope1);
+				if (txmask & BIT(2))
+					REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+						      AR_PHY_TPC_19_ALPHA_THERM,
+						      temp_slope2);
 			}
 		} else {
 			/*
 			 * If temp compensation is not enabled,
 			 * set all registers to 0.
 			 */
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
-			REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
-				      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(0))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(1))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
+			if (txmask & BIT(2))
+				REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2,
+					      AR_PHY_TPC_19_ALPHA_THERM, 0);
 		}
 	} else {
 		REG_RMW_FIELD(ah, AR_PHY_TPC_19,