From: Prabhakar Kushwaha Date: Thu, 8 Nov 2012 08:12:59 +0000 (+0530) Subject: mtd: fsl_ifc_nand: wait tWB time, poll R/B before command execution X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=d6ba745d0a073a0f48053fa4744ab2e86c310aad;p=deliverable%2Flinux.git mtd: fsl_ifc_nand: wait tWB time, poll R/B before command execution IFC_FIR_OP_CMD0 issues command for execution without checking flash readiness. It may cause problem if flash is not ready. Instead use IFC_FIR_OP_CW0 which Wait for tWB time and poll R/B to return high or time-out, before issuing command. NAND_CMD_READID command implemention does not fulfill above requirement. So update its programming. Signed-off-by: Prabhakar Kushwaha Signed-off-by: Hemant Nautiyal Signed-off-by: Artem Bityutskiy --- diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 3551a99076ba..53152310804c 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -389,7 +389,7 @@ static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command, timing = IFC_FIR_OP_RBCD; out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | (timing << IFC_NAND_FIR0_OP2_SHIFT)); out_be32(&ifc->ifc_nand.nand_fcr0, @@ -754,7 +754,7 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv) /* READID */ out_be32(&ifc->ifc_nand.nand_fir0, - (IFC_FIR_OP_CMD0 << IFC_NAND_FIR0_OP0_SHIFT) | + (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) | (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) | (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT)); out_be32(&ifc->ifc_nand.nand_fcr0,