From: Christian Glindkamp Date: Thu, 3 Jan 2008 11:15:23 +0000 (+0100) Subject: [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=da7a42d60ba214937ddb35152f336a4e4baa49a6;p=deliverable%2Flinux.git [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation Currently the udc pullup is enabled by default on boot. If the device is connected to a host at this time, the host starts the negotiation before the udc/gadget driver is ready to handle it. Signed-off-by: Christian Glindkamp Acked-by: David Brownell Acked-by: Andrew Victor Signed-off-by: Russell King --- diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 57d7e3bd05db..245641263fce 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -107,8 +107,6 @@ static struct platform_device at91sam9261_udc_device = { void __init at91_add_device_udc(struct at91_udc_data *data) { - unsigned long x; - if (!data) return; @@ -117,9 +115,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) at91_set_deglitch(data->vbus_pin, 1); } - /* Pullup pin is handled internally */ - x = at91_sys_read(AT91_MATRIX_USBPUCR); - at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); + /* Pullup pin is handled internally by USB device peripheral */ udc_data = *data; platform_device_register(&at91sam9261_udc_device);