From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri, 25 Apr 2014 12:00:12 +0000 (+0100)
Subject: mmc: sdhci: track whether preset mode is currently enabled in hardware
X-Git-Url: http://drtracing.org/?a=commitdiff_plain;h=da91a8f9c0f56d75b35bfe2e2456187ab55b3639;p=deliverable%2Flinux.git

mmc: sdhci: track whether preset mode is currently enabled in hardware

Track whether preset mode is currently enabled in hardware, and use that
when making decisions elsewhere in the code rather than reading the
register and checking the bit.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Chris Ball <chris@printf.net>
---

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index effd9e5d1d81..447eef8217c7 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -205,9 +205,14 @@ static void sdhci_do_reset(struct sdhci_host *host, u8 mask)
 
 	host->ops->reset(host, mask);
 
-	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
-		if ((host->ops->enable_dma) && (mask & SDHCI_RESET_ALL))
-			host->ops->enable_dma(host);
+	if (mask & SDHCI_RESET_ALL) {
+		if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
+			if (host->ops->enable_dma)
+				host->ops->enable_dma(host);
+		}
+
+		/* Resetting the controller clears many */
+		host->preset_enabled = false;
 	}
 }
 
@@ -1126,8 +1131,7 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
 		return;
 
 	if (host->version >= SDHCI_SPEC_300) {
-		if (sdhci_readw(host, SDHCI_HOST_CONTROL2) &
-			SDHCI_CTRL_PRESET_VAL_ENABLE) {
+		if (host->preset_enabled) {
 			u16 pre_val;
 
 			clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
@@ -1493,13 +1497,13 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
 		    (ios->timing == MMC_TIMING_UHS_SDR25))
 			ctrl |= SDHCI_CTRL_HISPD;
 
-		ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-		if (!(ctrl_2 & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
+		if (!host->preset_enabled) {
 			sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
 			/*
 			 * We only need to set Driver Strength if the
 			 * preset value enable is not set.
 			 */
+			ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
 			ctrl_2 &= ~SDHCI_CTRL_DRV_TYPE_MASK;
 			if (ios->drv_type == MMC_SET_DRIVER_TYPE_A)
 				ctrl_2 |= SDHCI_CTRL_DRV_TYPE_A;
@@ -2018,26 +2022,30 @@ out:
 
 static void sdhci_enable_preset_value(struct sdhci_host *host, bool enable)
 {
-	u16 ctrl;
-
 	/* Host Controller v3.00 defines preset value registers */
 	if (host->version < SDHCI_SPEC_300)
 		return;
 
-	ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
-
 	/*
 	 * We only enable or disable Preset Value if they are not already
 	 * enabled or disabled respectively. Otherwise, we bail out.
 	 */
-	if (enable && !(ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
-		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags |= SDHCI_PV_ENABLED;
-	} else if (!enable && (ctrl & SDHCI_CTRL_PRESET_VAL_ENABLE)) {
-		ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+	if (host->preset_enabled != enable) {
+		u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+
+		if (enable)
+			ctrl |= SDHCI_CTRL_PRESET_VAL_ENABLE;
+		else
+			ctrl &= ~SDHCI_CTRL_PRESET_VAL_ENABLE;
+
 		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
-		host->flags &= ~SDHCI_PV_ENABLED;
+
+		if (enable)
+			host->flags |= SDHCI_PV_ENABLED;
+		else
+			host->flags &= ~SDHCI_PV_ENABLED;
+
+		host->preset_enabled = enable;
 	}
 }
 
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 7f3efbab8732..08abe9941884 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -143,6 +143,7 @@ struct sdhci_host {
 
 	bool runtime_suspended;	/* Host is runtime suspended */
 	bool bus_on;		/* Bus power prevents runtime suspend */
+	bool preset_enabled;	/* Preset is enabled */
 
 	struct mmc_request *mrq;	/* Current request */
 	struct mmc_command *cmd;	/* Current command */